overlay/frameworks/base/core/res/res/values/config.xml - device/fairphone/fp3-common - Gitiles

 <?xml version="1.0" encoding="utf-8"?>
 <!--
     Copyright (c) 2014, The Linux Foundation. All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions are
     met:
         * Redistributions of source code must retain the above copyright
           notice, this list of conditions and the following disclaimer.
         * Redistributions in binary form must reproduce the above
           copyright notice, this list of conditions and the following
           disclaimer in the documentation and/or other materials provided
           with the distribution.
         * Neither the name of The Linux Foundation nor the names of its
           contributors may be used to endorse or promote products derived
           from this software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
     WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
     ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
     BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
     WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
     OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
     IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
 -->

 <resources>

     <!-- Audio -->
     <!-- Whether the Unprocessed audio source supports the required frequency range and level -->
     <bool name="config_supportAudioSourceUnprocessed">true</bool>


     <!-- Bluetooth -->
     <!-- Boolean indicating if current platform supports HFP inband ringing -->
     <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>

     <!-- Boolean indicating if current platform supports BLE peripheral mode -->
     <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>


     <!-- Camera Shutter -->
     <!-- Whether camera shutter sound is forced or not  (country specific). -->
     <bool name="config_camera_sound_forced">false</bool>


     <!-- Dialer -->
     <!-- The name of the package that will hold the dialer role by default. -->
     <string name="config_defaultDialer" translatable="false">com.android.dialer</string>


     <!-- Doze -->
     <!-- Enable doze mode -->
     <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
     <bool name="config_dozeAfterScreenOff">true</bool>
     <!-- Screen brightness when dozing. -->
     <integer name="config_screenBrightnessDoze">17</integer>
     <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
     <bool name="config_setColorTransformAccelerated">true</bool>


     <!-- Multi User -->
     <!--  Maximum number of supported users -->
     <integer name="config_multiuserMaximumUsers">4</integer>
     <!--  Whether Multiuser UI should be shown -->
     <bool name="config_enableMultiUserUI">true</bool>


     <!-- NTP Server -->

     <!-- Remote server that can provide NTP responses. -->
     <string translatable="false" name="config_ntpServer">europe.pool.ntp.org</string>


     <!-- Screen and Display -->

     <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
          Software implementation will be used if config_hardware_auto_brightness_available is not set -->
     <bool name="config_automatic_brightness_available">true</bool>

     <!-- The maximum range of gamma adjustment possible using the screen
         auto-brightness adjustment setting. -->
     <fraction name="config_autoBrightnessAdjustmentMaxGamma">300%</fraction>

     <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
         for debouncing the light sensor.  Different constants are used to debounce the light sensor
         when adapting to brighter or darker environments.  This parameter controls how quickly
         brightness changes occur in response to an observed change in light level that exceeds the
         hysteresis threshold. -->
     <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
     <integer name="config_autoBrightnessDarkeningLightDebounce">8000</integer>

     <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
          The N entries of this array define N + 1 control points as follows:
          (1-based arrays)

          Point 1:            (0, value[1]):             lux <= 0
          Point 2:     (level[1], value[2]):  0        < lux <= level[1]
          Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
          ...
          Point N+1: (level[N], value[N+1]):  level[N] < lux

          The control points must be strictly increasing.  Each control point
          corresponds to an entry in the brightness backlight values arrays.
          For example, if LUX == level[1] (first element of the levels array)
          then the brightness will be determined by value[2] (second element
          of the brightness values array).

          Spline interpolation is used to determine the auto-brightness
          backlight values for LUX levels between these control points.

          Must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLevels">
         <item>10</item>
         <item>30</item>
         <item>60</item>
         <item>100</item>
         <item>150</item>
         <item>210</item>
         <item>255</item>
     </integer-array>

     <!-- Array of output values for LCD backlight corresponding to the LUX values
          in the config_autoBrightnessLevels array.  This array should have size one greater
          than the size of the config_autoBrightnessLevels array.
          The brightness values must be between 0 and 255 and be non-decreasing.
          This must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLcdBacklightValues">
         <item>10</item>
         <item>20</item>
         <item>40</item>
         <item>70</item>
         <item>110</item>
         <item>160</item>
         <item>200</item>
         <item>255</item>
     </integer-array>

     <!-- Screen brightness used to dim the screen when the user activity
         timeout expires.  May be less than the minimum allowed brightness setting
         that can be set by the user. -->
     <integer name="config_screenBrightnessDim">1</integer>

     <!-- Default screen brightness setting.
         Must be in the range specified by minimum and maximum. -->
     <integer name="config_screenBrightnessSettingDefault">71</integer>

     <!-- Indicate whether to allow the device to suspend when the screen is off
     due to the proximity sensor.  This resource should only be set to true
     if the sensor HAL correctly handles the proximity sensor as a wake-up source.
     Otherwise, the device may fail to wake out of suspend reliably.
     The default is false. -->
     <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>

     <!-- If this is true, the screen will come on when you plug/unplug usb/power/whatever. -->
     <bool name="config_unplugTurnsOnScreen">true</bool>


     <!-- Navigation bar -->

     <!-- Enable system navigation keys. -->
     <bool name="config_supportSystemNavigationKeys">true</bool>

     <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
         autodetected from the Configuration. -->
     <bool name="config_showNavigationBar">true</bool>


     <!-- Round Icons -->

     <!-- Set icon mask to circle -->
     <string name="config_icon_mask" translatable="false">"M50 0A50 50,0,1,1,50 100A50 50,0,1,1,50 0"</string>

     <!-- Flag indicating whether round icons should be parsed from the application manifest. -->
     <bool name="config_useRoundIcon">true</bool>


     <!-- Biometics -->

     <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
          when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
          where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
          and Strength as defined in Authenticators.java -->
     <string-array name="config_biometric_sensors" translatable="false" >
         <item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
     </string-array>


     <!-- NOTE: All Telephony/IMS/Operator Requirement configs to be added below this line. -->


     <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
     <bool name="config_cellBroadcastAppLinks">true</bool>

     <!-- This string array should be overridden by the device to present a list of network
          attributes.  This is used by the connectivity manager to decide which networks can coexist
          based on the hardware -->
     <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
          [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
     <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
          before automatically restore the default connection.  Set -1 if the connection
          does not require auto-restore. -->
     <!-- the 6th element indicates boot-time dependency-met value. -->
     <string-array translatable="false" name="networkAttributes">
         <item>"wifi,1,1,1,-1,true"</item>
         <item>"mobile,0,0,0,-1,true"</item>
         <item>"mobile_mms,2,0,4,60000,true"</item>
         <item>"mobile_supl,3,0,2,60000,true"</item>
         <item>"mobile_dun,4,0,2,60000,true"</item>
         <item>"mobile_hipri,5,0,3,60000,true"</item>
         <item>"mobile_fota,10,0,2,60000,true"</item>
         <item>"mobile_ims,11,0,2,60000,true"</item>
         <item>"mobile_cbs,12,0,2,60000,true"</item>
         <item>"bluetooth,7,7,2,-1,true"</item>
         <item>"mobile_emergency,15,0,5,-1,true"</item>
     </string-array>

     <!-- This string array should be overridden by the device to present a list of radio
          attributes.  This is used by the connectivity manager to decide which networks can coexist
          based on the hardware -->
     <!-- An Array of "[ConnectivityManager connectionType],
                       [# simultaneous connection types]"  -->
     <string-array translatable="false" name="radioAttributes">
         <item>"1,1"</item>
         <item>"0,1"</item>
         <item>"7,1"</item>
     </string-array>

     <!-- Boolean indicating if restoring network selection should be skipped -->
     <!-- The restoring is handled by modem if it is true-->
     <bool translatable="false" name="skip_restoring_network_selection">true</bool>

     <!-- Is the device capable of hot swapping an ICC Card -->
     <bool name="config_hotswapCapable">true</bool>

     <!-- MMS user agent string -->
     <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string>

     <!-- MMS user agent prolfile url -->
     <string name="config_mms_user_agent_profile_url" translatable="false"
             >http://www.google.com/oha/rdf/ua-profile-kila.xml</string>

     <!-- Configuration to restart radio upon PDP_DEACTIVATE with
          error cause as Regular deactivation(36). -->
     <!--
     <bool name="config_radio_reset_on_regular_deactivation">false</bool>
     -->
     <!-- Flag indicating if the speed up audio on mt call code should be executed -->
     <bool name="config_speed_up_audio_on_mt_calls">true</bool>

     <!-- Flag specifying whether VoLTE, VT and WFC is available on device -->
     <bool name="config_device_volte_available">true</bool>
     <bool name="config_device_vt_available">true</bool>
     <bool name="config_device_wfc_ims_available">true</bool>

     <!-- Flag specifying whether VoLTE & VT should be available for carrier: independent of
          carrier provisioning. If false: hard disabled. If true: then depends on carrier
          provisioning, availability etc -->
     <bool name="config_carrier_volte_available">true</bool>

     <!-- Configure mobile tcp buffer sizes in the form:
          rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
          If no value is found for the rat-name in use, the system default will be applied.
     -->
     <string-array name="config_mobile_tcp_buffers">
         <item>"5gnr:2097152,6291456,16777216,512000,2097152,8388608"</item>
         <item>"lte:2097152,4194304,8388608,262144,524288,1048576"</item>
         <item>"lte_ca:4096,6291456,12582912,4096,1048576,2097152"</item>
         <item>"umts:4094,87380,1220608,4096,16384,1220608"</item>
         <item>"hspa:4094,87380,1220608,4096,16384,1220608"</item>
         <item>"hsupa:4094,87380,1220608,4096,16384,1220608"</item>
         <item>"hsdpa:4094,87380,1220608,4096,16384,1220608"</item>
         <item>"hspap:4094,87380,1220608,4096,16384,1220608"</item>
         <item>"edge:4093,26280,35040,4096,16384,35040"</item>
         <item>"gprs:4092,8760,11680,4096,8760,11680"</item>
         <item>"evdo:4094,87380,524288,4096,16384,262144"</item>
     </string-array>

 </resources>
	<?xml version="1.0" encoding="utf-8"?>
	<!--
	Copyright (c) 2014, The Linux Foundation. All rights reserved.

	Redistribution and use in source and binary forms, with or without
	modification, are permitted provided that the following conditions are
	met:
	* Redistributions of source code must retain the above copyright
	notice, this list of conditions and the following disclaimer.
	* Redistributions in binary form must reproduce the above
	copyright notice, this list of conditions and the following
	disclaimer in the documentation and/or other materials provided
	with the distribution.
	* Neither the name of The Linux Foundation nor the names of its
	contributors may be used to endorse or promote products derived
	from this software without specific prior written permission.

	THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
	WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
	ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
	BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
	WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
	OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
	IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
	-->

	<resources>

	<!-- Audio -->
	<!-- Whether the Unprocessed audio source supports the required frequency range and level -->
	<bool name="config_supportAudioSourceUnprocessed">true</bool>


	<!-- Bluetooth -->
	<!-- Boolean indicating if current platform supports HFP inband ringing -->
	<bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>

	<!-- Boolean indicating if current platform supports BLE peripheral mode -->
	<bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>


	<!-- Camera Shutter -->
	<!-- Whether camera shutter sound is forced or not (country specific). -->
	<bool name="config_camera_sound_forced">false</bool>


	<!-- Dialer -->
	<!-- The name of the package that will hold the dialer role by default. -->
	<string name="config_defaultDialer" translatable="false">com.android.dialer</string>


	<!-- Doze -->
	<!-- Enable doze mode -->
	<string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
	<bool name="config_dozeAfterScreenOff">true</bool>
	<!-- Screen brightness when dozing. -->
	<integer name="config_screenBrightnessDoze">17</integer>
	<bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
	<bool name="config_setColorTransformAccelerated">true</bool>


	<!-- Multi User -->
	<!-- Maximum number of supported users -->
	<integer name="config_multiuserMaximumUsers">4</integer>
	<!-- Whether Multiuser UI should be shown -->
	<bool name="config_enableMultiUserUI">true</bool>


	<!-- NTP Server -->

	<!-- Remote server that can provide NTP responses. -->
	<string translatable="false" name="config_ntpServer">europe.pool.ntp.org</string>


	<!-- Screen and Display -->

	<!-- Flag indicating whether the we should enable the automatic brightness in Settings.
	Software implementation will be used if config_hardware_auto_brightness_available is not set -->
	<bool name="config_automatic_brightness_available">true</bool>

	<!-- The maximum range of gamma adjustment possible using the screen
	auto-brightness adjustment setting. -->
	<fraction name="config_autoBrightnessAdjustmentMaxGamma">300%</fraction>

	<!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
	for debouncing the light sensor. Different constants are used to debounce the light sensor
	when adapting to brighter or darker environments. This parameter controls how quickly
	brightness changes occur in response to an observed change in light level that exceeds the
	hysteresis threshold. -->
	<integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
	<integer name="config_autoBrightnessDarkeningLightDebounce">8000</integer>

	<!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
	The N entries of this array define N + 1 control points as follows:
	(1-based arrays)

	Point 1: (0, value[1]): lux <= 0
	Point 2: (level[1], value[2]): 0 < lux <= level[1]
	Point 3: (level[2], value[3]): level[2] < lux <= level[3]
	...
	Point N+1: (level[N], value[N+1]): level[N] < lux

	The control points must be strictly increasing. Each control point
	corresponds to an entry in the brightness backlight values arrays.
	For example, if LUX == level[1] (first element of the levels array)
	then the brightness will be determined by value[2] (second element
	of the brightness values array).

	Spline interpolation is used to determine the auto-brightness
	backlight values for LUX levels between these control points.

	Must be overridden in platform specific overlays -->
	<integer-array name="config_autoBrightnessLevels">
	<item>10</item>
	<item>30</item>
	<item>60</item>
	<item>100</item>
	<item>150</item>
	<item>210</item>
	<item>255</item>
	</integer-array>

	<!-- Array of output values for LCD backlight corresponding to the LUX values
	in the config_autoBrightnessLevels array. This array should have size one greater
	than the size of the config_autoBrightnessLevels array.
	The brightness values must be between 0 and 255 and be non-decreasing.
	This must be overridden in platform specific overlays -->
	<integer-array name="config_autoBrightnessLcdBacklightValues">
	<item>10</item>
	<item>20</item>
	<item>40</item>
	<item>70</item>
	<item>110</item>
	<item>160</item>
	<item>200</item>
	<item>255</item>
	</integer-array>

	<!-- Screen brightness used to dim the screen when the user activity
	timeout expires. May be less than the minimum allowed brightness setting
	that can be set by the user. -->
	<integer name="config_screenBrightnessDim">1</integer>

	<!-- Default screen brightness setting.
	Must be in the range specified by minimum and maximum. -->
	<integer name="config_screenBrightnessSettingDefault">71</integer>

	<!-- Indicate whether to allow the device to suspend when the screen is off
	due to the proximity sensor. This resource should only be set to true
	if the sensor HAL correctly handles the proximity sensor as a wake-up source.
	Otherwise, the device may fail to wake out of suspend reliably.
	The default is false. -->
	<bool name="config_suspendWhenScreenOffDueToProximity">true</bool>

	<!-- If this is true, the screen will come on when you plug/unplug usb/power/whatever. -->
	<bool name="config_unplugTurnsOnScreen">true</bool>


	<!-- Navigation bar -->

	<!-- Enable system navigation keys. -->
	<bool name="config_supportSystemNavigationKeys">true</bool>

	<!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
	autodetected from the Configuration. -->
	<bool name="config_showNavigationBar">true</bool>


	<!-- Round Icons -->

	<!-- Set icon mask to circle -->
	<string name="config_icon_mask" translatable="false">"M50 0A50 50,0,1,1,50 100A50 50,0,1,1,50 0"</string>

	<!-- Flag indicating whether round icons should be parsed from the application manifest. -->
	<bool name="config_useRoundIcon">true</bool>


	<!-- Biometics -->

	<!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
	when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
	where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
	and Strength as defined in Authenticators.java -->
	<string-array name="config_biometric_sensors" translatable="false" >
	<item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
	</string-array>


	<!-- NOTE: All Telephony/IMS/Operator Requirement configs to be added below this line. -->


	<!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
	<bool name="config_cellBroadcastAppLinks">true</bool>

	<!-- This string array should be overridden by the device to present a list of network
	attributes. This is used by the connectivity manager to decide which networks can coexist
	based on the hardware -->
	<!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
	[associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] -->
	<!-- the 5th element "resore-time" indicates the number of milliseconds to delay
	before automatically restore the default connection. Set -1 if the connection
	does not require auto-restore. -->
	<!-- the 6th element indicates boot-time dependency-met value. -->
	<string-array translatable="false" name="networkAttributes">
	<item>"wifi,1,1,1,-1,true"</item>
	<item>"mobile,0,0,0,-1,true"</item>
	<item>"mobile_mms,2,0,4,60000,true"</item>
	<item>"mobile_supl,3,0,2,60000,true"</item>
	<item>"mobile_dun,4,0,2,60000,true"</item>
	<item>"mobile_hipri,5,0,3,60000,true"</item>
	<item>"mobile_fota,10,0,2,60000,true"</item>
	<item>"mobile_ims,11,0,2,60000,true"</item>
	<item>"mobile_cbs,12,0,2,60000,true"</item>
	<item>"bluetooth,7,7,2,-1,true"</item>
	<item>"mobile_emergency,15,0,5,-1,true"</item>
	</string-array>

	<!-- This string array should be overridden by the device to present a list of radio
	attributes. This is used by the connectivity manager to decide which networks can coexist
	based on the hardware -->
	<!-- An Array of "[ConnectivityManager connectionType],
	[# simultaneous connection types]" -->
	<string-array translatable="false" name="radioAttributes">
	<item>"1,1"</item>
	<item>"0,1"</item>
	<item>"7,1"</item>
	</string-array>

	<!-- Boolean indicating if restoring network selection should be skipped -->
	<!-- The restoring is handled by modem if it is true-->
	<bool translatable="false" name="skip_restoring_network_selection">true</bool>

	<!-- Is the device capable of hot swapping an ICC Card -->
	<bool name="config_hotswapCapable">true</bool>

	<!-- MMS user agent string -->
	<string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string>

	<!-- MMS user agent prolfile url -->
	<string name="config_mms_user_agent_profile_url" translatable="false"
	>http://www.google.com/oha/rdf/ua-profile-kila.xml</string>

	<!-- Configuration to restart radio upon PDP_DEACTIVATE with
	error cause as Regular deactivation(36). -->
	<!--
	<bool name="config_radio_reset_on_regular_deactivation">false</bool>
	-->
	<!-- Flag indicating if the speed up audio on mt call code should be executed -->
	<bool name="config_speed_up_audio_on_mt_calls">true</bool>

	<!-- Flag specifying whether VoLTE, VT and WFC is available on device -->
	<bool name="config_device_volte_available">true</bool>
	<bool name="config_device_vt_available">true</bool>
	<bool name="config_device_wfc_ims_available">true</bool>

	<!-- Flag specifying whether VoLTE & VT should be available for carrier: independent of
	carrier provisioning. If false: hard disabled. If true: then depends on carrier
	provisioning, availability etc -->
	<bool name="config_carrier_volte_available">true</bool>

	<!-- Configure mobile tcp buffer sizes in the form:
	rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
	If no value is found for the rat-name in use, the system default will be applied.
	-->
	<string-array name="config_mobile_tcp_buffers">
	<item>"5gnr:2097152,6291456,16777216,512000,2097152,8388608"</item>
	<item>"lte:2097152,4194304,8388608,262144,524288,1048576"</item>
	<item>"lte_ca:4096,6291456,12582912,4096,1048576,2097152"</item>
	<item>"umts:4094,87380,1220608,4096,16384,1220608"</item>
	<item>"hspa:4094,87380,1220608,4096,16384,1220608"</item>
	<item>"hsupa:4094,87380,1220608,4096,16384,1220608"</item>
	<item>"hsdpa:4094,87380,1220608,4096,16384,1220608"</item>
	<item>"hspap:4094,87380,1220608,4096,16384,1220608"</item>
	<item>"edge:4093,26280,35040,4096,16384,35040"</item>
	<item>"gprs:4092,8760,11680,4096,8760,11680"</item>
	<item>"evdo:4094,87380,524288,4096,16384,262144"</item>
	</string-array>

	</resources>