| # Copyright 2021-2022 Fairphone B.V. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| FP_PATH := device/fairphone/FP3 |
| |
| # Call the vendor setup |
| $(call inherit-product-if-exists, vendor/fairphone/fp3-common/device-vendor.mk) |
| |
| $(call inherit-product, build/make/target/product/product_launched_with_p.mk) |
| |
| $(call inherit-product, frameworks/native/build/phone-xhdpi-4096-dalvik-heap.mk) |
| |
| $(call inherit-product, device/fairphone/fp3-common/common/common64.mk) |
| |
| PRODUCT_NAME := FP3 |
| PRODUCT_DEVICE := FP3 |
| PRODUCT_MODEL := FP3 |
| PRODUCT_MANUFACTURER := Fairphone |
| PRODUCT_BRAND := Fairphone |
| |
| |
| # Allow using custom and expressive names for our Android flavors while in fact |
| # targeting the same model with all of them. |
| PRODUCT_BUILD_PROP_OVERRIDES += PRODUCT_MODEL=FP3 PRODUCT_NAME=FP3 |
| |
| # vendor/qcom/proprietary/common/config/device-vendor.mk --> PRODUCT_LIST |
| TARGET_BASE_PRODUCT := FP3 |
| TARGET_VENDOR := fairphone |
| |
| TARGET_SYSTEM_PROP := device/$(TARGET_VENDOR)/$(PRODUCT_NAME)/system.prop |
| |
| |
| # We don't have the calibration data as this sort of |
| # data can only be generated at the factory so don't generate persist.img |
| FP3_SKIP_PERSIST_IMG := true |
| |
| # Overlays |
| DEVICE_PACKAGE_OVERLAYS += \ |
| $(LOCAL_PATH)/overlay |
| |
| |
| # A/B related defines |
| AB_OTA_UPDATER := true |
| AB_OTA_PARTITIONS += \ |
| boot \ |
| dtbo \ |
| system \ |
| vbmeta \ |
| vendor |
| |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_vendor=true \ |
| POSTINSTALL_PATH_vendor=bin/checkpoint_gc \ |
| FILESYSTEM_TYPE_vendor=ext4 \ |
| POSTINSTALL_OPTIONAL_vendor=true |
| |
| PRODUCT_PACKAGES += \ |
| checkpoint_gc \ |
| update_engine_sideload |
| |
| |
| # AVB |
| BOARD_AVB_ENABLE := true |
| |
| |
| # Additional native libraries |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/configs/public.libraries.txt:$(TARGET_COPY_OUT_VENDOR)/etc/public.libraries.txt |
| |
| |
| # Atrace HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.atrace@1.0-service |
| |
| |
| # Audio |
| # AV Enhancement |
| TARGET_ENABLE_QC_AV_ENHANCEMENTS := true |
| |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio@6.0 \ |
| android.hardware.audio.common@6.0 \ |
| android.hardware.audio.common@6.0-util \ |
| android.hardware.audio@6.0-impl:32 \ |
| android.hardware.audio.effect@6.0 \ |
| android.hardware.audio.effect@6.0-impl:32 \ |
| android.hardware.audio.service \ |
| android.hardware.soundtrigger@2.1-impl \ |
| audio.a2dp.default \ |
| audio.primary.msm8953 \ |
| audio.r_submix.default \ |
| audio.usb.default \ |
| libaacwrapper \ |
| libaudio-resampler \ |
| libautohal \ |
| libqcompostprocbundle \ |
| libqcomvisualizer \ |
| libqcomvoiceprocessing \ |
| libvolumelistener \ |
| tinymix |
| |
| |
| AUDIO_HAL_PATH := vendor/qcom/opensource/audio-hal/primary-hal |
| |
| # Audio files |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_platform_info_intcodec.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_intcodec.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_platform_info_sku3_tasha.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_sku3_tasha.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_platform_info_sku4.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_sku4.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_platform_info_tasha.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_tasha.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_platform_info_tashalite.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_tashalite.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy.conf \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/audio_tuning_mixer.txt:$(TARGET_COPY_OUT_VENDOR)/etc/audio_tuning_mixer.txt \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths_mtp.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_mtp.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths_sku3_tasha.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_sku3_tasha.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths_sku4.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_sku4.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths_tasha.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tasha.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/mixer_paths_tashalite.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tashalite.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/sound_trigger_mixer_paths_wcd9306.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9306.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/sound_trigger_mixer_paths_wcd9330.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9330.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/sound_trigger_mixer_paths_wcd9335.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9335.xml \ |
| $(AUDIO_HAL_PATH)/configs/msm8953/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml |
| |
| |
| # Audio config files |
| PRODUCT_COPY_FILES += \ |
| frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \ |
| frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml |
| |
| # Custom config files |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml |
| |
| |
| # Audio firmware files |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/aw/aw8898_cfg.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/aw8898_cfg.bin \ |
| $(FP_PATH)/tas2557_fw/OBO_0617_music.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/tas2557_uCDSP.bin \ |
| $(FP_PATH)/tas2557_fw/tas2557evm_OBO_0617.ftcfg:$(TARGET_COPY_OUT_VENDOR)/firmware/tas2557evm_aacspk_a.ftcfg |
| |
| |
| # Audio Specific device overlays |
| DEVICE_PACKAGE_OVERLAYS += $(AUDIO_HAL_PATH)/configs/common/overlay |
| |
| |
| # Audio Specific properties |
| # Properties |
| -include $(LOCAL_PATH)/audio_properties.mk |
| |
| |
| # Audio Kernel modules |
| AUDIO_DLKM := audio_apr.ko |
| AUDIO_DLKM += audio_q6_notifier.ko |
| AUDIO_DLKM += audio_adsp_loader.ko |
| AUDIO_DLKM += audio_q6.ko |
| AUDIO_DLKM += audio_usf.ko |
| AUDIO_DLKM += audio_pinctrl_wcd.ko |
| AUDIO_DLKM += audio_swr.ko |
| AUDIO_DLKM += audio_wcd_core.ko |
| AUDIO_DLKM += audio_swr_ctrl.ko |
| AUDIO_DLKM += audio_wsa881x.ko |
| AUDIO_DLKM += audio_wsa881x_analog.ko |
| AUDIO_DLKM += audio_platform.ko |
| AUDIO_DLKM += audio_cpe_lsm.ko |
| AUDIO_DLKM += audio_hdmi.ko |
| AUDIO_DLKM += audio_stub.ko |
| AUDIO_DLKM += audio_wcd9xxx.ko |
| AUDIO_DLKM += audio_mbhc.ko |
| AUDIO_DLKM += audio_wcd9335.ko |
| AUDIO_DLKM += audio_wcd_cpe.ko |
| AUDIO_DLKM += audio_digital_cdc.ko |
| AUDIO_DLKM += audio_analog_cdc.ko |
| AUDIO_DLKM += audio_native.ko |
| AUDIO_DLKM += audio_machine_sdm450.ko |
| AUDIO_DLKM += audio_machine_ext_sdm450.ko |
| PRODUCT_PACKAGES += $(AUDIO_DLKM) |
| |
| |
| # ANT |
| PRODUCT_PACKAGES += \ |
| AntHalService \ |
| antradio_app \ |
| com.dsi.ant@1.0 \ |
| libantradio |
| |
| # Bluetooth |
| PRODUCT_PACKAGES += \ |
| libbt-vendor \ |
| audio.bluetooth.default \ |
| android.hardware.bluetooth.audio@2.0-impl \ |
| android.hardware.bluetooth@1.0 \ |
| vendor.qti.hardware.bluetooth_audio@2.0 \ |
| vendor.qti.hardware.bluetooth_audio@2.1.vendor \ |
| vendor.qti.hardware.btconfigstore@1.0.vendor |
| |
| # Bluetooth Permissions |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml |
| |
| |
| # Boot |
| PRODUCT_PACKAGES += \ |
| android.hardware.boot@1.0-impl \ |
| android.hardware.boot@1.0-impl.recovery \ |
| android.hardware.boot@1.0-service \ |
| bootctrl.msm8953 \ |
| update_engine \ |
| update_engine_client \ |
| update_engine_sideload \ |
| update_verifier |
| |
| |
| # Boot animation |
| TARGET_SCREEN_HEIGHT := 2160 |
| TARGET_SCREEN_WIDTH := 1080 |
| |
| |
| PRODUCT_COPY_FILES += \ |
| vendor/fairphone/media/bootanimation/bootanimation.zip:$(TARGET_COPY_OUT_PRODUCT)/media/bootanimation.zip |
| |
| |
| # Camera |
| |
| |
| # Component overrides |
| # TODO: Check if this is required. |
| #PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/configs/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml |
| |
| |
| # Display |
| PRODUCT_PACKAGES += \ |
| android.hardware.graphics.allocator@2.0-impl \ |
| android.hardware.graphics.allocator@2.0-service \ |
| android.hardware.graphics.composer@2.1-service \ |
| android.hardware.graphics.mapper@2.0-impl-2.1 \ |
| android.hardware.memtrack@1.0-impl \ |
| android.hardware.memtrack@1.0-service \ |
| gralloc.default \ |
| gralloc.msm8953 \ |
| hwcomposer.msm8953 \ |
| memtrack.msm8953 \ |
| libdisplayconfig \ |
| libqdutils \ |
| libqdMetaData \ |
| libvulkan \ |
| vendor.qti.hardware.display.composer@3.0 |
| |
| |
| # Vendor Display |
| # Disable skip validate |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.display.disable_skip_validate=1 |
| |
| |
| # Display Properties |
| PRODUCT_AAPT_CONFIG := normal |
| PRODUCT_AAPT_PREF_CONFIG := xxhdpi |
| |
| |
| # DRM |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@1.3-service.clearkey |
| |
| |
| # Enable vndk-sp Libraries |
| PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true |
| TARGET_USES_MKE2FS := true |
| |
| PRODUCT_PACKAGES += \ |
| vndk_package |
| |
| |
| # Encryption |
| PRODUCT_PROPERTY_OVERRIDES += ro.crypto.allow_encrypt_override=true |
| PRODUCT_PROPERTY_OVERRIDES += ro.crypto.volume.filenames_mode=aes-256-cts |
| |
| |
| # FBE support |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/init.qti.qseecomd.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qti.qseecomd.sh |
| |
| |
| # Framework Detect |
| PRODUCT_PACKAGES += \ |
| libqti_vndfwk_detect \ |
| libqti_vndfwk_detect.vendor \ |
| libvndfwk_detect_jni.qti \ |
| libvndfwk_detect_jni.qti.vendor \ |
| vndservicemanager |
| |
| |
| # HIDL |
| PRODUCT_PACKAGES += \ |
| android.hidl.base@1.0 \ |
| libhidltransport \ |
| libhidltransport.vendor \ |
| libhwbinder \ |
| libhwbinder.vendor |
| |
| |
| # Health |
| PRODUCT_PACKAGES += \ |
| android.hardware.health@2.1-impl \ |
| android.hardware.health@2.1-impl.recovery \ |
| android.hardware.health@2.1-service |
| |
| # IMS |
| PRODUCT_PACKAGES += \ |
| ims-ext-common \ |
| ims_ext_common.xml \ |
| ConfURIDialer |
| |
| # IPACM |
| PRODUCT_PACKAGES += \ |
| ipacm \ |
| IPACM_cfg.xml \ |
| libipanat \ |
| liboffloadhal \ |
| libqsap_sdk |
| |
| # IRQ |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/configs/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf \ |
| $(FP_PATH)/configs/msm_irqbalance_little_big.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance_little_big.conf |
| |
| |
| # Kernel modules |
| # Kernel modules install path |
| KERNEL_MODULES_INSTALL := dlkm |
| KERNEL_MODULES_OUT := out/target/product/$(PRODUCT_NAME)/$(KERNEL_MODULES_INSTALL)/lib/modules |
| |
| |
| # LED packages |
| PRODUCT_PACKAGES += \ |
| android.hardware.light@2.0-impl \ |
| android.hardware.light@2.0-service \ |
| lights.msm8953 |
| |
| |
| # Media / StagefrightCodec 2.0 |
| PRODUCT_PROPERTY_OVERRIDES += debug.stagefright.omx_default_rank=0 |
| |
| |
| # NFC |
| |
| |
| # OMX |
| PRODUCT_PACKAGES += \ |
| libavservices_minijail.vendor \ |
| libc2dcolorconvert \ |
| libOmxAacEnc \ |
| libOmxAmrEnc \ |
| libOmxCore \ |
| libOmxEvrcEnc \ |
| libOmxQcelp13Enc \ |
| libOmxVdec \ |
| libOmxVenc \ |
| libqomx_core \ |
| libaacwrapper \ |
| libmm-omxcore \ |
| libstagefrighthw \ |
| libstagefright_softomx.vendor |
| |
| |
| # |
| # system prop for opengles version |
| # |
| # 196608 is decimal for 0x30000 to report major/minor versions as 3/0 |
| # 196609 is decimal for 0x30001 to report major/minor versions as 3/1 |
| # 196610 is decimal for 0x30002 to report major/minor versions as 3/2 |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.opengles.version=196610 |
| |
| |
| # Perf |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/configs/powerhint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.xml |
| |
| |
| # Power |
| PRODUCT_PACKAGES += \ |
| android.hardware.power@1.0-impl \ |
| android.hardware.power@1.0-service \ |
| power.qcom |
| |
| |
| # Feature flags |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \ |
| frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.level-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level-0.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version-1_0_3.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute-0.xml \ |
| frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_SYSTEM)/etc/permissions/android.software.verified_boot.xml \ |
| frameworks/native/data/etc/android.software.vulkan.deqp.level-2019-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level-2019-03-01.xml \ |
| frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \ |
| frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml \ |
| frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml |
| |
| |
| # privapp-permissions whitelisting |
| PRODUCT_PROPERTY_OVERRIDES += ro.control_privapp_permissions=enforce |
| |
| |
| # Protobuf |
| PRODUCT_PACKAGES += \ |
| libprotobuf-cpp-full \ |
| libprotobuf-cpp-full-vendorcompat \ |
| libprotobuf-cpp-lite-vendorcompat |
| |
| |
| # RIL properties |
| PRODUCT_PROPERTY_OVERRIDES += rild.libpath=/vendor/lib64/libril-qc-qmi-1.so |
| PRODUCT_PROPERTY_OVERRIDES += vendor.rild.libpath=/vendor/lib64/libril-qc-qmi-1.so |
| #vendor prop to disable advanced network scanning |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.radio.enableadvancedscan=false |
| |
| |
| # RenderScript |
| PRODUCT_PACKAGES += \ |
| android.hardware.renderscript@1.0-impl |
| |
| |
| # SDCard |
| # default is nosdcard, S/W button enabled in resource |
| PRODUCT_CHARACTERISTICS := nosdcard |
| |
| |
| # Seccomp |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/seccomp/mediacodec-seccomp.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy \ |
| $(FP_PATH)/seccomp/mediaextractor-seccomp.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediaextractor.policy |
| |
| |
| # System helper |
| PRODUCT_PACKAGES += \ |
| vendor.qti.hardware.systemhelper@1.0 |
| |
| |
| # Service tracker |
| PRODUCT_PACKAGES += \ |
| vendor.qti.hardware.servicetracker@1.2.vendor |
| |
| |
| # Telephony Permissions |
| |
| |
| # Thermal |
| PRODUCT_PACKAGES += \ |
| android.hardware.thermal@1.0-impl \ |
| android.hardware.thermal@1.0-service |
| |
| |
| # Tinyxml |
| PRODUCT_PACKAGES += \ |
| libtinyxml |
| |
| # USB |
| PRODUCT_PACKAGES += \ |
| android.hardware.usb@1.0-service |
| |
| -include vendor/qcom/opensource/usb/vendor_product.mk |
| |
| |
| # Vendor move |
| PRODUCT_VENDOR_MOVE_ENABLED := true |
| |
| |
| # Vibrator |
| PRODUCT_PACKAGES += \ |
| android.hardware.vibrator@1.0-impl \ |
| android.hardware.vibrator@1.0-service |
| |
| |
| # WiFi |
| # WLAN drivers |
| PRODUCT_COPY_FILES += \ |
| $(FP_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg.ini \ |
| $(FP_PATH)/wifi/WCNSS_wlan_dictionary.dat:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_wlan_dictionary.dat \ |
| $(FP_PATH)/wifi/WCNSS_qcom_wlan_nv.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin # From Android 10 |
| |
| # Flag to check if wcnss_service is built from source |
| TARGET_USE_WCNSS_HAL := false |
| |
| # If building from source then drop proprietary dependency |
| ifeq ($(TARGET_USE_WCNSS_HAL),true) |
| TARGET_USES_QCOM_WCNSS_QMI := false |
| endif |
| |
| # WiFi HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.wifi@1.0-service |
| |
| # WiFi Components |
| PRODUCT_PACKAGES += \ |
| hostapd \ |
| hostapd.accept \ |
| hostapd.deny \ |
| hostapd_cli \ |
| hostapd_default.conf \ |
| libnl \ |
| libqsap_sdk \ |
| libwcnss_qmi \ |
| libwifi-hal-qcom \ |
| libwpa_client \ |
| p2p_supplicant_overlay.conf \ |
| vendor.qti.hardware.wifi.supplicant@1.0.vendor \ |
| wcnss_service \ |
| wificond \ |
| wpa_cli \ |
| wpa_supplicant.conf \ |
| wpa_supplicant \ |
| wpa_supplicant_overlay.conf \ |
| WifiOverlay \ |
| TetheringConfigOverlay |
| |
| |
| # Call the proprietary setup |
| # Call this in the end so that flags if required can be utilized. |
| $(call inherit-product, device/fairphone/fp3-proprietary/device-vendor.mk) |
| |
| ################################################################################### |
| # This is the End of target.mk file. |
| # Now, Pickup other split product.mk files: |
| ################################################################################### |
| $(call inherit-product-if-exists, vendor/qcom/opensource/commonsys-intf/display/config/display-product-system.mk) |
| $(call inherit-product-if-exists, vendor/qcom/opensource/commonsys-intf/display/config/display-interfaces-product.mk) |
| $(call inherit-product-if-exists, vendor/qcom/opensource/usb/vendor_product.mk) |
| $(call inherit-product-if-exists, vendor/qcom/opensource/vibrator/vibrator-vendor-product.mk) |
| ################################################################################### |