BoardConfig.mk - device/qcom/qssi - Gitiles

 # config.mk
 #
 # Product-specific compile-time definitions.
 #
 BUILD_BROKEN_ANDROIDMK_EXPORTS=true
 BUILD_BROKEN_DUP_COPY_HEADERS=true
 BUILD_BROKEN_PHONY_TARGETS=true
 # TODO(b/124534788): Temporarily allow eng and debug LOCAL_MODULE_TAGS
 BUILD_BROKEN_ENG_DEBUG_TAGS := true

 TARGET_BOARD_PLATFORM := msmnile
 TARGET_BOOTLOADER_BOARD_NAME := msmnile

 TARGET_ARCH := arm64
 TARGET_ARCH_VARIANT := armv8-a
 TARGET_CPU_ABI := arm64-v8a
 TARGET_CPU_ABI2 :=
 TARGET_CPU_VARIANT := generic

 TARGET_2ND_ARCH := arm
 TARGET_2ND_ARCH_VARIANT := armv7-a-neon
 TARGET_2ND_CPU_ABI := armeabi-v7a
 TARGET_2ND_CPU_ABI2 := armeabi
 TARGET_2ND_CPU_VARIANT := cortex-a9

 TARGET_HW_DISK_ENCRYPTION := true
 TARGET_HW_DISK_ENCRYPTION_PERF := true

 BOARD_SECCOMP_POLICY := device/qcom/$(TARGET_BOARD_PLATFORM)/seccomp

 TARGET_NO_BOOTLOADER := true
 TARGET_USES_UEFI := true
 TARGET_NO_KERNEL := false

 # Disable DLKMs compilation for lunch qssi builds.
 TARGET_KERNEL_DLKM_DISABLE := true

 -include $(QCPATH)/common/msmnile/BoardConfigVendor.mk

 # Some framework code requires this to enable BT
 BOARD_HAVE_BLUETOOTH := true
 BOARD_USES_WIPOWER := true
 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/qcom/common

 USE_OPENGL_RENDERER := true
 BOARD_USE_LEGACY_UI := true

 ifeq ($(ENABLE_AB), true)
 # Defines for enabling A/B builds
 AB_OTA_UPDATER := true
 # Full A/B partition update set
 # AB_OTA_PARTITIONS := xbl rpm tz hyp pmic modem abl boot keymaster cmnlib cmnlib64 system bluetooth

 # Minimum partition set for automation to test recovery generation code
 # Packages generated by using just the below flag cannot be used for updating a device. You must pass
 # in the full set mentioned above as part of your make commandline
 AB_OTA_PARTITIONS ?= system
 TARGET_NO_RECOVERY := true
 else
 TARGET_NO_RECOVERY := true
 # Enable System As Root even for non-A/B
 # Add the below cache settings for /cache mountpoint, although we don't need the resultant cache image
 # from within Qssi.
 BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
 BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
 endif

 BOARD_USES_METADATA_PARTITION := true
 BOARD_METADATAIMAGE_PARTITION_SIZE := 16777216

 #Enable split vendor image
 ENABLE_VENDOR_IMAGE := true
 BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
 TARGET_COPY_OUT_VENDOR := vendor
 BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true

 TARGET_USERIMAGES_USE_EXT4 := true
 BOARD_BOOTIMAGE_PARTITION_SIZE := 0x06000000
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 10737418240
 BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
 BOARD_PREBUILT_DTBOIMAGE := out/target/product/msmnile/prebuilt_dtbo.img
 BOARD_DTBOIMG_PARTITION_SIZE := 0x0800000
 BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)

 #----------------------------------------------------------------------
 # Compile Linux Kernel
 #----------------------------------------------------------------------
 KERN_CONF_PATH := kernel/msm-$(TARGET_KERNEL_VERSION)/arch/arm64/configs
 KERNEL_DEFCONFIG := sdm845_defconfig
 ifeq ($(wildcard $(KERN_CONF_PATH)/$(KERNEL_DEFCONFIG)),)
 KERNEL_DEFCONFIG := $(shell ls $(KERN_CONF_PATH)/vendor | grep sm8..._defconfig)
 ifeq ($(KERNEL_DEFCONFIG),)
 KERNEL_DEFCONFIG := kona_defconfig
 endif
 KERNEL_DEFCONFIG := vendor/$(KERNEL_DEFCONFIG)
 endif

 TARGET_USES_ION := true
 TARGET_USES_NEW_ION_API :=true
 TARGET_USES_QCOM_BSP := false
 BOARD_KERNEL_CMDLINE := console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=2048 loop.max_part=7 androidboot.usbcontroller=a600000.dwc3

 BOARD_EGL_CFG := device/qcom/$(TARGET_BOARD_PLATFORM)/egl.cfg

 BOARD_KERNEL_BASE        := 0x00000000
 BOARD_KERNEL_PAGESIZE    := 4096
 BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
 BOARD_RAMDISK_OFFSET     := 0x02000000

 TARGET_KERNEL_ARCH := arm64
 TARGET_KERNEL_HEADER_ARCH := arm64
 TARGET_KERNEL_CROSS_COMPILE_PREFIX := $(shell pwd)/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-androidkernel-

 KERNEL_UNCOMPRESSED_DEFCONFIG := $(shell grep "CONFIG_BUILD_ARM64_UNCOMPRESSED_KERNEL=y" $(KERN_CONF_PATH)/$(KERNEL_DEFCONFIG))
 ifeq ($(KERNEL_UNCOMPRESSED_DEFCONFIG),)
 	TARGET_USES_UNCOMPRESSED_KERNEL := false
 else
 	TARGET_USES_UNCOMPRESSED_KERNEL := true
 endif

 MAX_EGL_CACHE_KEY_SIZE := 12*1024
 MAX_EGL_CACHE_SIZE := 2048*1024

 BOARD_USES_GENERIC_AUDIO := true
 BOARD_QTI_CAMERA_32BIT_ONLY := true
 TARGET_NO_RPC := true

 TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
 TARGET_INIT_VENDOR_LIB := libinit_msm

 TARGET_KERNEL_APPEND_DTB := true
 TARGET_COMPILE_WITH_MSM_KERNEL := true

 #Enable PD locater/notifier
 TARGET_PD_SERVICE_ENABLED := true

 #Enable peripheral manager
 TARGET_PER_MGR_ENABLED := true

 # Enable dex pre-opt to speed up initial boot
 ifeq ($(HOST_OS),linux)
     ifeq ($(WITH_DEXPREOPT),)
       WITH_DEXPREOPT := true
       WITH_DEXPREOPT_PIC := true
       ifneq ($(TARGET_BUILD_VARIANT),user)
         # Retain classes.dex in APK's for non-user builds
         DEX_PREOPT_DEFAULT := nostripping
       endif
     endif
 endif

 TARGET_USES_GRALLOC1 := true

 # Enable sensor multi HAL
 USE_SENSOR_MULTI_HAL := true

 #Add non-hlos files to ota packages
 ADD_RADIO_FILES := true

 #Generate DTBO image
 BOARD_KERNEL_SEPARATED_DTBO := true

 #Enable INTERACTION_BOOST
 TARGET_USES_INTERACTION_BOOST := true

 #Enable DRM plugins 64 bit compilation
 TARGET_ENABLE_MEDIADRM_64 := true

 ifeq ($(ENABLE_VENDOR_IMAGE), false)
 	$(error "Vendor Image is mandatory !!")
 endif

 #Flag to enable System SDK Requirements.
 #All vendor APK will be compiled against system_current API set.
 BOARD_SYSTEMSDK_VERSIONS:=28

 BUILD_BROKEN_DUP_RULES := true

 #Enable VNDK Compliance
 BOARD_VNDK_VERSION:=current
 Q_BU_DISABLE_MODULE := true

 ###### Dynamic Partition Handling ####
 ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
 BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
 BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
 BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
 else
 BOARD_BUILD_SYSTEM_ROOT_IMAGE := false
 BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
 BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := system
 endif
 ###### Dynamic Partition Handling ####

 #################################################################################
 # This is the End of BoardConfig.mk file.
 # Now, Pickup other split Board.mk files:
 #################################################################################
 -include vendor/qcom/defs/board-defs/system/*.mk
 #################################################################################
	# config.mk
	#
	# Product-specific compile-time definitions.
	#
	BUILD_BROKEN_ANDROIDMK_EXPORTS=true
	BUILD_BROKEN_DUP_COPY_HEADERS=true
	BUILD_BROKEN_PHONY_TARGETS=true
	# TODO(b/124534788): Temporarily allow eng and debug LOCAL_MODULE_TAGS
	BUILD_BROKEN_ENG_DEBUG_TAGS := true

	TARGET_BOARD_PLATFORM := msmnile
	TARGET_BOOTLOADER_BOARD_NAME := msmnile

	TARGET_ARCH := arm64
	TARGET_ARCH_VARIANT := armv8-a
	TARGET_CPU_ABI := arm64-v8a
	TARGET_CPU_ABI2 :=
	TARGET_CPU_VARIANT := generic

	TARGET_2ND_ARCH := arm
	TARGET_2ND_ARCH_VARIANT := armv7-a-neon
	TARGET_2ND_CPU_ABI := armeabi-v7a
	TARGET_2ND_CPU_ABI2 := armeabi
	TARGET_2ND_CPU_VARIANT := cortex-a9

	TARGET_HW_DISK_ENCRYPTION := true
	TARGET_HW_DISK_ENCRYPTION_PERF := true

	BOARD_SECCOMP_POLICY := device/qcom/$(TARGET_BOARD_PLATFORM)/seccomp

	TARGET_NO_BOOTLOADER := true
	TARGET_USES_UEFI := true
	TARGET_NO_KERNEL := false

	# Disable DLKMs compilation for lunch qssi builds.
	TARGET_KERNEL_DLKM_DISABLE := true

	-include $(QCPATH)/common/msmnile/BoardConfigVendor.mk

	# Some framework code requires this to enable BT
	BOARD_HAVE_BLUETOOTH := true
	BOARD_USES_WIPOWER := true
	BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/qcom/common

	USE_OPENGL_RENDERER := true
	BOARD_USE_LEGACY_UI := true

	ifeq ($(ENABLE_AB), true)
	# Defines for enabling A/B builds
	AB_OTA_UPDATER := true
	# Full A/B partition update set
	# AB_OTA_PARTITIONS := xbl rpm tz hyp pmic modem abl boot keymaster cmnlib cmnlib64 system bluetooth

	# Minimum partition set for automation to test recovery generation code
	# Packages generated by using just the below flag cannot be used for updating a device. You must pass
	# in the full set mentioned above as part of your make commandline
	AB_OTA_PARTITIONS ?= system
	TARGET_NO_RECOVERY := true
	else
	TARGET_NO_RECOVERY := true
	# Enable System As Root even for non-A/B
	# Add the below cache settings for /cache mountpoint, although we don't need the resultant cache image
	# from within Qssi.
	BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
	BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
	endif

	BOARD_USES_METADATA_PARTITION := true
	BOARD_METADATAIMAGE_PARTITION_SIZE := 16777216

	#Enable split vendor image
	ENABLE_VENDOR_IMAGE := true
	BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
	TARGET_COPY_OUT_VENDOR := vendor
	BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true

	TARGET_USERIMAGES_USE_EXT4 := true
	BOARD_BOOTIMAGE_PARTITION_SIZE := 0x06000000
	BOARD_USERDATAIMAGE_PARTITION_SIZE := 10737418240
	BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
	BOARD_PREBUILT_DTBOIMAGE := out/target/product/msmnile/prebuilt_dtbo.img
	BOARD_DTBOIMG_PARTITION_SIZE := 0x0800000
	BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)

	#----------------------------------------------------------------------
	# Compile Linux Kernel
	#----------------------------------------------------------------------
	KERN_CONF_PATH := kernel/msm-$(TARGET_KERNEL_VERSION)/arch/arm64/configs
	KERNEL_DEFCONFIG := sdm845_defconfig
	ifeq ($(wildcard $(KERN_CONF_PATH)/$(KERNEL_DEFCONFIG)),)
	KERNEL_DEFCONFIG := $(shell ls $(KERN_CONF_PATH)/vendor \| grep sm8..._defconfig)
	ifeq ($(KERNEL_DEFCONFIG),)
	KERNEL_DEFCONFIG := kona_defconfig
	endif
	KERNEL_DEFCONFIG := vendor/$(KERNEL_DEFCONFIG)
	endif

	TARGET_USES_ION := true
	TARGET_USES_NEW_ION_API :=true
	TARGET_USES_QCOM_BSP := false
	BOARD_KERNEL_CMDLINE := console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=2048 loop.max_part=7 androidboot.usbcontroller=a600000.dwc3

	BOARD_EGL_CFG := device/qcom/$(TARGET_BOARD_PLATFORM)/egl.cfg

	BOARD_KERNEL_BASE := 0x00000000
	BOARD_KERNEL_PAGESIZE := 4096
	BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
	BOARD_RAMDISK_OFFSET := 0x02000000

	TARGET_KERNEL_ARCH := arm64
	TARGET_KERNEL_HEADER_ARCH := arm64
	TARGET_KERNEL_CROSS_COMPILE_PREFIX := $(shell pwd)/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-androidkernel-

	KERNEL_UNCOMPRESSED_DEFCONFIG := $(shell grep "CONFIG_BUILD_ARM64_UNCOMPRESSED_KERNEL=y" $(KERN_CONF_PATH)/$(KERNEL_DEFCONFIG))
	ifeq ($(KERNEL_UNCOMPRESSED_DEFCONFIG),)
	TARGET_USES_UNCOMPRESSED_KERNEL := false
	else
	TARGET_USES_UNCOMPRESSED_KERNEL := true
	endif

	MAX_EGL_CACHE_KEY_SIZE := 12*1024
	MAX_EGL_CACHE_SIZE := 2048*1024

	BOARD_USES_GENERIC_AUDIO := true
	BOARD_QTI_CAMERA_32BIT_ONLY := true
	TARGET_NO_RPC := true

	TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
	TARGET_INIT_VENDOR_LIB := libinit_msm

	TARGET_KERNEL_APPEND_DTB := true
	TARGET_COMPILE_WITH_MSM_KERNEL := true

	#Enable PD locater/notifier
	TARGET_PD_SERVICE_ENABLED := true

	#Enable peripheral manager
	TARGET_PER_MGR_ENABLED := true

	# Enable dex pre-opt to speed up initial boot
	ifeq ($(HOST_OS),linux)
	ifeq ($(WITH_DEXPREOPT),)
	WITH_DEXPREOPT := true
	WITH_DEXPREOPT_PIC := true
	ifneq ($(TARGET_BUILD_VARIANT),user)
	# Retain classes.dex in APK's for non-user builds
	DEX_PREOPT_DEFAULT := nostripping
	endif
	endif
	endif

	TARGET_USES_GRALLOC1 := true

	# Enable sensor multi HAL
	USE_SENSOR_MULTI_HAL := true

	#Add non-hlos files to ota packages
	ADD_RADIO_FILES := true

	#Generate DTBO image
	BOARD_KERNEL_SEPARATED_DTBO := true

	#Enable INTERACTION_BOOST
	TARGET_USES_INTERACTION_BOOST := true

	#Enable DRM plugins 64 bit compilation
	TARGET_ENABLE_MEDIADRM_64 := true

	ifeq ($(ENABLE_VENDOR_IMAGE), false)
	$(error "Vendor Image is mandatory !!")
	endif

	#Flag to enable System SDK Requirements.
	#All vendor APK will be compiled against system_current API set.
	BOARD_SYSTEMSDK_VERSIONS:=28

	BUILD_BROKEN_DUP_RULES := true

	#Enable VNDK Compliance
	BOARD_VNDK_VERSION:=current
	Q_BU_DISABLE_MODULE := true

	###### Dynamic Partition Handling ####
	ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
	BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
	BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
	BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
	else
	BOARD_BUILD_SYSTEM_ROOT_IMAGE := false
	BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
	BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := system
	endif
	###### Dynamic Partition Handling ####

	#################################################################################
	# This is the End of BoardConfig.mk file.
	# Now, Pickup other split Board.mk files:
	#################################################################################
	-include vendor/qcom/defs/board-defs/system/*.mk
	#################################################################################