qssi.mk - device/qcom/qssi - Gitiles

 #For QSSI, we build only the system image. Here we explicitly set the images
 #we build so there is no confusion.
 PRODUCT_BUILD_SYSTEM_IMAGE := true
 PRODUCT_BUILD_SYSTEM_OTHER_IMAGE := false
 PRODUCT_BUILD_VENDOR_IMAGE := false
 PRODUCT_BUILD_SYSTEM_EXT_IMAGE := false
 PRODUCT_BUILD_ODM_IMAGE := false
 PRODUCT_BUILD_CACHE_IMAGE := false
 PRODUCT_BUILD_USERDATA_IMAGE := false

 #Also, there is no need to build an OTA package as this will be done later
 #when we combine this system build with the non-system images.
 TARGET_SKIP_OTA_PACKAGE := true

 # Enable AVB 2.0
 BOARD_AVB_ENABLE := true

 #### Dynamic Partition Handling

 ####

 # Retain the earlier default behavior i.e. ota config (dynamic partition was disabled if not set explicitly), so set
 # SHIPPING_API_LEVEL to 28 if it was not set earlier (this is generally set earlier via build.sh per-target)
 SHIPPING_API_LEVEL ?= 28

 #### Turning BOARD_DYNAMIC_PARTITION_ENABLE flag to TRUE will enable dynamic partition/super image creation.
 # Enable Dynamic partitions only for Q new launch devices.
 ifeq ($(SHIPPING_API_LEVEL),29)
   BOARD_DYNAMIC_PARTITION_ENABLE ?= true
   PRODUCT_SHIPPING_API_LEVEL := 29
 else ifeq ($(SHIPPING_API_LEVEL),28)
   BOARD_DYNAMIC_PARTITION_ENABLE ?= false
   $(call inherit-product, build/make/target/product/product_launched_with_p.mk)
 endif

 ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
 # Enable chain partition for system, to facilitate system-only OTA in Treble.
 BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
 BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
 BOARD_AVB_SYSTEM_ROLLBACK_INDEX := 0
 BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
 PRODUCT_BUILD_RAMDISK_IMAGE := false
 PRODUCT_BUILD_PRODUCT_IMAGE := false
 else
 PRODUCT_USE_DYNAMIC_PARTITIONS := true
 # Disable building the SUPER partition in this build. SUPER should be built
 # after QSSI has been merged with the SoC build.
 PRODUCT_BUILD_PRODUCT_IMAGE := true
 PRODUCT_BUILD_SUPER_PARTITION := false
 PRODUCT_BUILD_RAMDISK_IMAGE := true
 BOARD_AVB_VBMETA_SYSTEM := system product
 BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
 BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
 BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
 BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
 endif
 #### Dynamic Partition Handling

 PRODUCT_SOONG_NAMESPACES += \
     hardware/google/av \
     hardware/google/interfaces

 # define flag to determine the kernel
 TARGET_KERNEL_VERSION := $(shell ls -1r kernel | grep "msm-*" | sed 's/msm-//' | head -1)

 # Set flags for 4.14 and higher kernels
 ifeq ($(TARGET_KERNEL_VERSION),$(filter $(TARGET_KERNEL_VERSION),3.18 4.4 4.9))
 TARGET_USES_NEW_ION := false
 else
 TARGET_USES_NEW_ION := true
 #Enable llvm support for kernel
 KERNEL_LLVM_SUPPORT := true
 #Enable sd-llvm suppport for kernel
 KERNEL_SD_LLVM_SUPPORT := true
 endif

 VENDOR_QTI_PLATFORM := msmnile
 VENDOR_QTI_DEVICE := qssi

 #QSSI configuration
 #Single system image project structure
 TARGET_USES_QSSI := true

 ENABLE_AB ?= true

 TARGET_DEFINES_DALVIK_HEAP := true
 $(call inherit-product, device/qcom/qssi/common64.mk)

 #Inherit all except heap growth limit from phone-xhdpi-2048-dalvik-heap.mk
 PRODUCT_PROPERTY_OVERRIDES  += \
 	dalvik.vm.heapstartsize=8m \
 	dalvik.vm.heapsize=512m \
 	dalvik.vm.heaptargetutilization=0.75 \
 	dalvik.vm.heapminfree=512k \
 	dalvik.vm.heapmaxfree=8m


 PRODUCT_NAME := $(VENDOR_QTI_DEVICE)
 PRODUCT_DEVICE := $(VENDOR_QTI_DEVICE)
 PRODUCT_BRAND := qti
 PRODUCT_MODEL := qssi system image for arm64

 #Initial bringup flags
 TARGET_USES_AOSP := false
 TARGET_USES_AOSP_FOR_AUDIO := false
 TARGET_USES_QCOM_BSP := false

 # RRO configuration
 TARGET_USES_RRO := true

 TARGET_USES_NQ_NFC := true

 # default is nosdcard, S/W button enabled in resource
 PRODUCT_CHARACTERISTICS := nosdcard

 BOARD_FRP_PARTITION_NAME := frp

 #Android EGL implementation
 PRODUCT_PACKAGES += libGLES_android

 PRODUCT_BOOT_JARS += tcmiface
 PRODUCT_BOOT_JARS += telephony-ext
 PRODUCT_PACKAGES += telephony-ext

 TARGET_ENABLE_QC_AV_ENHANCEMENTS := false

 TARGET_SYSTEM_PROP += device/qcom/qssi/system.prop

 TARGET_DISABLE_DASH := true
 TARGET_DISABLE_QTI_VPP := true

 ifneq ($(TARGET_DISABLE_DASH), true)
     PRODUCT_BOOT_JARS += qcmediaplayer
 endif

 #Project is missing on sdm845, comment it for now
 #ifneq ($(strip $(QCPATH)),)
 #    PRODUCT_BOOT_JARS += libprotobuf-java_mls
 #endif

 PRODUCT_PACKAGES += android.hardware.media.omx@1.0-impl

 # Audio configuration file
 -include $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/qssi/qssi.mk
 -include $(TOPDIR)hardware/qcom/audio/configs/msmnile/msmnile.mk
 AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
 USE_LIB_PROCESS_GROUP := true

 PRODUCT_PACKAGES += fs_config_files

 ifeq ($(ENABLE_AB), true)
 #A/B related packages
 PRODUCT_PACKAGES += update_engine \
     update_engine_client \
     update_verifier \
     bootctrl.msmnile \
     android.hardware.boot@1.0-impl \
     android.hardware.boot@1.0-service

 PRODUCT_HOST_PACKAGES += \
     brillo_update_payload

 #Boot control HAL test app
 PRODUCT_PACKAGES_DEBUG += bootctl
 endif

 #Healthd packages
 PRODUCT_PACKAGES += \
     android.hardware.health@1.0-impl \
     android.hardware.health@1.0-convert \
     android.hardware.health@1.0-service \
     libhealthd.msm

 DEVICE_MATRIX_FILE   := device/qcom/common/compatibility_matrix.xml
 DEVICE_FRAMEWORK_MANIFEST_FILE := device/qcom/qssi/framework_manifest.xml
 DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := vendor/qcom/opensource/core-utils/vendor_framework_compatibility_matrix.xml

 #audio related module
 PRODUCT_PACKAGES += libvolumelistener

 # Display/Graphics
 PRODUCT_PACKAGES += \
     android.hardware.configstore@1.0-service \
     android.hardware.broadcastradio@1.0-impl

 # Camera configuration file. Shared by passthrough/binderized camera HAL
 PRODUCT_PACKAGES += camera.device@3.2-impl
 PRODUCT_PACKAGES += camera.device@1.0-impl
 PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-impl
 # Enable binderized camera HAL
 PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-service_64

 # Vibrator
 PRODUCT_PACKAGES += \
     vendor.qti.hardware.vibrator@1.2-service

 # Context hub HAL
 PRODUCT_PACKAGES += \
     android.hardware.contexthub@1.0-impl.generic \
     android.hardware.contexthub@1.0-service

 # system prop for enabling QFS (QTI Fingerprint Solution)
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.vendor.qfp=true


 # USB default HAL
 PRODUCT_PACKAGES += \
     android.hardware.usb@1.0-service

 #PASR HAL and APP
 PRODUCT_PACKAGES += \
     vendor.qti.power.pasrmanager@1.0-service \
     vendor.qti.power.pasrmanager@1.0-impl \
     pasrservice

 # Kernel modules install path
 KERNEL_MODULES_INSTALL := dlkm
 KERNEL_MODULES_OUT := out/target/product/$(PRODUCT_NAME)/$(KERNEL_MODULES_INSTALL)/lib/modules


 #Exclude vibrator from InputManager
 PRODUCT_COPY_FILES += \
     device/qcom/qssi/excluded-input-devices.xml:system/etc/excluded-input-devices.xml

 #Enable full treble flag
 PRODUCT_FULL_TREBLE_OVERRIDE := true
 PRODUCT_VENDOR_MOVE_ENABLED := true
 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true

 ifneq ($(strip $(TARGET_USES_RRO)),true)
 DEVICE_PACKAGE_OVERLAYS += device/qcom/qssi/overlay
 endif


 #Enable vndk-sp Libraries
 PRODUCT_PACKAGES += vndk_package

 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE:=true


 TARGET_MOUNT_POINTS_SYMLINKS := false

 TARGET_USES_MKE2FS := true

 PRODUCT_PROPERTY_OVERRIDES += \
 ro.crypto.volume.filenames_mode = "aes-256-cts" \
 ro.crypto.allow_encrypt_override = true

 TARGET_USES_QCOM_DISPLAY_BSP := true

 ifeq ($(TARGET_USES_NEW_ION),true)
 AUDIO_FEATURE_ENABLED_DLKM := true
 else
 AUDIO_FEATURE_ENABLED_DLKM := false
 endif

 ###################################################################################
 # This is the End of target.mk file.
 # Now, Pickup other split product.mk files:
 ###################################################################################
 $(call inherit-product-if-exists, vendor/qcom/defs/product-defs/system/*.mk)
 ###################################################################################
	#For QSSI, we build only the system image. Here we explicitly set the images
	#we build so there is no confusion.
	PRODUCT_BUILD_SYSTEM_IMAGE := true
	PRODUCT_BUILD_SYSTEM_OTHER_IMAGE := false
	PRODUCT_BUILD_VENDOR_IMAGE := false
	PRODUCT_BUILD_SYSTEM_EXT_IMAGE := false
	PRODUCT_BUILD_ODM_IMAGE := false
	PRODUCT_BUILD_CACHE_IMAGE := false
	PRODUCT_BUILD_USERDATA_IMAGE := false

	#Also, there is no need to build an OTA package as this will be done later
	#when we combine this system build with the non-system images.
	TARGET_SKIP_OTA_PACKAGE := true

	# Enable AVB 2.0
	BOARD_AVB_ENABLE := true

	#### Dynamic Partition Handling

	####

	# Retain the earlier default behavior i.e. ota config (dynamic partition was disabled if not set explicitly), so set
	# SHIPPING_API_LEVEL to 28 if it was not set earlier (this is generally set earlier via build.sh per-target)
	SHIPPING_API_LEVEL ?= 28

	#### Turning BOARD_DYNAMIC_PARTITION_ENABLE flag to TRUE will enable dynamic partition/super image creation.
	# Enable Dynamic partitions only for Q new launch devices.
	ifeq ($(SHIPPING_API_LEVEL),29)
	BOARD_DYNAMIC_PARTITION_ENABLE ?= true
	PRODUCT_SHIPPING_API_LEVEL := 29
	else ifeq ($(SHIPPING_API_LEVEL),28)
	BOARD_DYNAMIC_PARTITION_ENABLE ?= false
	$(call inherit-product, build/make/target/product/product_launched_with_p.mk)
	endif

	ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
	# Enable chain partition for system, to facilitate system-only OTA in Treble.
	BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
	BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
	BOARD_AVB_SYSTEM_ROLLBACK_INDEX := 0
	BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
	PRODUCT_BUILD_RAMDISK_IMAGE := false
	PRODUCT_BUILD_PRODUCT_IMAGE := false
	else
	PRODUCT_USE_DYNAMIC_PARTITIONS := true
	# Disable building the SUPER partition in this build. SUPER should be built
	# after QSSI has been merged with the SoC build.
	PRODUCT_BUILD_PRODUCT_IMAGE := true
	PRODUCT_BUILD_SUPER_PARTITION := false
	PRODUCT_BUILD_RAMDISK_IMAGE := true
	BOARD_AVB_VBMETA_SYSTEM := system product
	BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
	BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
	BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
	BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
	endif
	#### Dynamic Partition Handling

	PRODUCT_SOONG_NAMESPACES += \
	hardware/google/av \
	hardware/google/interfaces

	# define flag to determine the kernel
	TARGET_KERNEL_VERSION := $(shell ls -1r kernel \| grep "msm-*" \| sed 's/msm-//' \| head -1)

	# Set flags for 4.14 and higher kernels
	ifeq ($(TARGET_KERNEL_VERSION),$(filter $(TARGET_KERNEL_VERSION),3.18 4.4 4.9))
	TARGET_USES_NEW_ION := false
	else
	TARGET_USES_NEW_ION := true
	#Enable llvm support for kernel
	KERNEL_LLVM_SUPPORT := true
	#Enable sd-llvm suppport for kernel
	KERNEL_SD_LLVM_SUPPORT := true
	endif

	VENDOR_QTI_PLATFORM := msmnile
	VENDOR_QTI_DEVICE := qssi

	#QSSI configuration
	#Single system image project structure
	TARGET_USES_QSSI := true

	ENABLE_AB ?= true

	TARGET_DEFINES_DALVIK_HEAP := true
	$(call inherit-product, device/qcom/qssi/common64.mk)

	#Inherit all except heap growth limit from phone-xhdpi-2048-dalvik-heap.mk
	PRODUCT_PROPERTY_OVERRIDES += \
	dalvik.vm.heapstartsize=8m \
	dalvik.vm.heapsize=512m \
	dalvik.vm.heaptargetutilization=0.75 \
	dalvik.vm.heapminfree=512k \
	dalvik.vm.heapmaxfree=8m


	PRODUCT_NAME := $(VENDOR_QTI_DEVICE)
	PRODUCT_DEVICE := $(VENDOR_QTI_DEVICE)
	PRODUCT_BRAND := qti
	PRODUCT_MODEL := qssi system image for arm64

	#Initial bringup flags
	TARGET_USES_AOSP := false
	TARGET_USES_AOSP_FOR_AUDIO := false
	TARGET_USES_QCOM_BSP := false

	# RRO configuration
	TARGET_USES_RRO := true

	TARGET_USES_NQ_NFC := true

	# default is nosdcard, S/W button enabled in resource
	PRODUCT_CHARACTERISTICS := nosdcard

	BOARD_FRP_PARTITION_NAME := frp

	#Android EGL implementation
	PRODUCT_PACKAGES += libGLES_android

	PRODUCT_BOOT_JARS += tcmiface
	PRODUCT_BOOT_JARS += telephony-ext
	PRODUCT_PACKAGES += telephony-ext

	TARGET_ENABLE_QC_AV_ENHANCEMENTS := false

	TARGET_SYSTEM_PROP += device/qcom/qssi/system.prop

	TARGET_DISABLE_DASH := true
	TARGET_DISABLE_QTI_VPP := true

	ifneq ($(TARGET_DISABLE_DASH), true)
	PRODUCT_BOOT_JARS += qcmediaplayer
	endif

	#Project is missing on sdm845, comment it for now
	#ifneq ($(strip $(QCPATH)),)
	# PRODUCT_BOOT_JARS += libprotobuf-java_mls
	#endif

	PRODUCT_PACKAGES += android.hardware.media.omx@1.0-impl

	# Audio configuration file
	-include $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/qssi/qssi.mk
	-include $(TOPDIR)hardware/qcom/audio/configs/msmnile/msmnile.mk
	AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
	USE_LIB_PROCESS_GROUP := true

	PRODUCT_PACKAGES += fs_config_files

	ifeq ($(ENABLE_AB), true)
	#A/B related packages
	PRODUCT_PACKAGES += update_engine \
	update_engine_client \
	update_verifier \
	bootctrl.msmnile \
	android.hardware.boot@1.0-impl \
	android.hardware.boot@1.0-service

	PRODUCT_HOST_PACKAGES += \
	brillo_update_payload

	#Boot control HAL test app
	PRODUCT_PACKAGES_DEBUG += bootctl
	endif

	#Healthd packages
	PRODUCT_PACKAGES += \
	android.hardware.health@1.0-impl \
	android.hardware.health@1.0-convert \
	android.hardware.health@1.0-service \
	libhealthd.msm

	DEVICE_MATRIX_FILE := device/qcom/common/compatibility_matrix.xml
	DEVICE_FRAMEWORK_MANIFEST_FILE := device/qcom/qssi/framework_manifest.xml
	DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := vendor/qcom/opensource/core-utils/vendor_framework_compatibility_matrix.xml

	#audio related module
	PRODUCT_PACKAGES += libvolumelistener

	# Display/Graphics
	PRODUCT_PACKAGES += \
	android.hardware.configstore@1.0-service \
	android.hardware.broadcastradio@1.0-impl

	# Camera configuration file. Shared by passthrough/binderized camera HAL
	PRODUCT_PACKAGES += camera.device@3.2-impl
	PRODUCT_PACKAGES += camera.device@1.0-impl
	PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-impl
	# Enable binderized camera HAL
	PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-service_64

	# Vibrator
	PRODUCT_PACKAGES += \
	vendor.qti.hardware.vibrator@1.2-service

	# Context hub HAL
	PRODUCT_PACKAGES += \
	android.hardware.contexthub@1.0-impl.generic \
	android.hardware.contexthub@1.0-service

	# system prop for enabling QFS (QTI Fingerprint Solution)
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.qfp=true


	# USB default HAL
	PRODUCT_PACKAGES += \
	android.hardware.usb@1.0-service

	#PASR HAL and APP
	PRODUCT_PACKAGES += \
	vendor.qti.power.pasrmanager@1.0-service \
	vendor.qti.power.pasrmanager@1.0-impl \
	pasrservice

	# Kernel modules install path
	KERNEL_MODULES_INSTALL := dlkm
	KERNEL_MODULES_OUT := out/target/product/$(PRODUCT_NAME)/$(KERNEL_MODULES_INSTALL)/lib/modules


	#Exclude vibrator from InputManager
	PRODUCT_COPY_FILES += \
	device/qcom/qssi/excluded-input-devices.xml:system/etc/excluded-input-devices.xml

	#Enable full treble flag
	PRODUCT_FULL_TREBLE_OVERRIDE := true
	PRODUCT_VENDOR_MOVE_ENABLED := true
	PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true

	ifneq ($(strip $(TARGET_USES_RRO)),true)
	DEVICE_PACKAGE_OVERLAYS += device/qcom/qssi/overlay
	endif


	#Enable vndk-sp Libraries
	PRODUCT_PACKAGES += vndk_package

	PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE:=true


	TARGET_MOUNT_POINTS_SYMLINKS := false

	TARGET_USES_MKE2FS := true

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.crypto.volume.filenames_mode = "aes-256-cts" \
	ro.crypto.allow_encrypt_override = true

	TARGET_USES_QCOM_DISPLAY_BSP := true

	ifeq ($(TARGET_USES_NEW_ION),true)
	AUDIO_FEATURE_ENABLED_DLKM := true
	else
	AUDIO_FEATURE_ENABLED_DLKM := false
	endif

	###################################################################################
	# This is the End of target.mk file.
	# Now, Pickup other split product.mk files:
	###################################################################################
	$(call inherit-product-if-exists, vendor/qcom/defs/product-defs/system/*.mk)
	###################################################################################