blob: 392d71f9f787fe608a784bbee0018710bb6c5aa2 [file] [log] [blame]
#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This file includes all definitions that apply to ALL mako devices, and
# are also specific to mako devices
#
# Everything in this directory will become public
DEVICE_PACKAGE_OVERLAYS := device/lge/mako/overlay
# This device is xhdpi. However the platform doesn't
# currently contain all of the bitmaps at xhdpi density so
# we do this little trick to fall back to the hdpi version
# if the xhdpi doesn't exist.
PRODUCT_AAPT_CONFIG := normal hdpi xhdpi
PRODUCT_AAPT_PREF_CONFIG := xhdpi
PRODUCT_PACKAGES := \
lights.msm8960
PRODUCT_PACKAGES += \
charger_res_images \
charger
# Live Wallpapers
PRODUCT_PACKAGES += \
LiveWallpapers \
LiveWallpapersPicker \
VisualizationWallpapers \
librs_jni
LOCAL_KERNEL := device/lge/mako-kernel/kernel
PRODUCT_COPY_FILES := \
$(LOCAL_KERNEL):kernel
PRODUCT_COPY_FILES += \
device/lge/mako/WCNSS_cfg.dat:system/vendor/firmware/wlan/prima/WCNSS_cfg.dat \
device/lge/mako/WCNSS_qcom_cfg.ini:system/etc/wifi/WCNSS_qcom_cfg.ini \
device/lge/mako/WCNSS_qcom_wlan_nv.bin:system/etc/wifi/WCNSS_qcom_wlan_nv.bin
PRODUCT_COPY_FILES += \
device/lge/mako/snd_soc_msm_2x_Fusion3:system/etc/snd_soc_msm/snd_soc_msm_2x_Fusion3 \
device/lge/mako/audio_policy.conf:system/etc/audio_policy.conf
PRODUCT_COPY_FILES += \
device/lge/mako/mixer_paths.xml:system/etc/mixer_paths.xml
PRODUCT_COPY_FILES += \
device/lge/mako/thermald-mako.conf:system/etc/thermald.conf
PRODUCT_COPY_FILES += \
device/lge/mako/init.mako.rc:root/init.mako.rc \
device/lge/mako/init.mako.usb.rc:root/init.mako.usb.rc \
device/lge/mako/fstab.mako:root/fstab.mako \
device/lge/mako/ueventd.mako.rc:root/ueventd.mako.rc \
device/lge/mako/media_profiles.xml:system/etc/media_profiles.xml \
device/lge/mako/media_codecs.xml:system/etc/media_codecs.xml
PRODUCT_COPY_FILES += \
device/lge/mako/kickstart_checker.sh:system/etc/kickstart_checker.sh
# Prebuilt kl and kcm keymaps
PRODUCT_COPY_FILES += \
device/lge/mako/apq8064-tabla-snd-card_Button_Jack.kl:system/usr/keylayout/apq8064-tabla-snd-card_Button_Jack.kl \
device/lge/mako/hs_detect.kl:system/usr/keylayout/hs_detect.kl \
device/lge/mako/pmic8xxx_pwrkey.kl:system/usr/keylayout/pmic8xxx_pwrkey.kl \
device/lge/mako/keypad_8064.kl:system/usr/keylayout/keypad_8064.kl \
device/lge/mako/apq8064-tabla-snd-card_Button_Jack.kcm:system/usr/keychars/apq8064-tabla-snd-card_Button_Jack.kcm \
device/lge/mako/hs_detect.kcm:system/usr/keychars/hs_detect.kcm \
device/lge/mako/keypad_8064.kcm:system/usr/keychars/keypad_8064.kcm \
device/lge/mako/pmic8xxx_pwrkey.kcm:system/usr/keychars/pmic8xxx_pwrkey.kcm
# Prebuilt input device calibration files
PRODUCT_COPY_FILES += \
device/lge/mako/touch_dev.idc:system/usr/idc/touch_dev.idc
# These are the hardware-specific features
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml
# GPS configuration
PRODUCT_COPY_FILES += \
device/lge/mako/gps.conf:system/etc/gps.conf
# NFC packages
PRODUCT_PACKAGES += \
nfc_nci.mako \
NfcNci \
Tag \
com.android.nfc_extras
# NFCEE access control
ifeq ($(TARGET_BUILD_VARIANT),user)
NFCEE_ACCESS_PATH := device/lge/mako/nfc/nfcee_access.xml
else
NFCEE_ACCESS_PATH := device/lge/mako/nfc/nfcee_access_debug.xml
endif
# NFC access control + feature files + configuration
PRODUCT_COPY_FILES += \
$(NFCEE_ACCESS_PATH):system/etc/nfcee_access.xml \
frameworks/native/data/etc/com.android.nfc_extras.xml:system/etc/permissions/com.android.nfc_extras.xml \
frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
device/lge/mako/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.opengles.version=196608
PRODUCT_PROPERTY_OVERRIDES += \
ro.sf.lcd_density=320
# Audio Configuration
# FIXME: Remove persist.audio.handset.mic and persist.audio.fluence.mode
# while switching new audio HAL from legacy HAL
PRODUCT_PROPERTY_OVERRIDES += \
persist.audio.handset.mic.type=digital \
persist.audio.dualmic.config=endfire \
persist.audio.fluence.voicecall=true \
persist.audio.handset.mic=dmic \
persist.audio.fluence.mode=endfire \
persist.audio.lowlatency.rec=false \
af.resampler.quality=4
# Do not power down SIM card when modem is sent to Low Power Mode.
PRODUCT_PROPERTY_OVERRIDES += \
persist.radio.apm_sim_not_pwdn=1
# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
PRODUCT_PROPERTY_OVERRIDES += \
ro.telephony.call_ring.multiple=0
#Upto 3 layers can go through overlays
PRODUCT_PROPERTY_OVERRIDES += persist.hwc.mdpcomp.enable=true
PRODUCT_CHARACTERISTICS := nosdcard
PRODUCT_TAGS += dalvik.gc.type-precise
PRODUCT_PACKAGES += \
librs_jni \
com.android.future.usb.accessory
# Filesystem management tools
PRODUCT_PACKAGES += \
e2fsck
PRODUCT_PACKAGES += \
libgenlock \
liboverlay \
hwcomposer.msm8960 \
gralloc.msm8960 \
copybit.msm8960
PRODUCT_PACKAGES += \
audio_policy.msm8960 \
audio.primary.msm8960 \
audio.a2dp.default \
audio.usb.default \
audio.r_submix.default \
libaudio-resampler
PRODUCT_PACKAGES += \
hci_qcomm_init
PRODUCT_PACKAGES += \
power.msm8960
PRODUCT_COPY_FILES += \
device/lge/mako/init.mako.bt.sh:system/etc/init.mako.bt.sh
PRODUCT_PROPERTY_OVERRIDES += \
ro.qualcomm.bt.hci_transport=smd
PRODUCT_PACKAGES += \
camera.mako \
camera.msm8960 \
libmmcamera_interface2 \
libmmcamera_interface
PRODUCT_PACKAGES += \
libmm-omxcore \
libdivxdrmdecrypt \
libOmxVdec \
libOmxVenc \
libOmxCore \
libstagefrighthw \
libc2dcolorconvert
PRODUCT_PACKAGES += \
libloc_adapter \
libloc_eng \
libloc_api_v02 \
libgps.utils \
gps.msm8960
PRODUCT_PACKAGES += \
bdAddrLoader \
libwfcu \
conn_init
PRODUCT_PACKAGES += \
keystore.msm8960
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
rild.libpath=/system/lib/libril-qc-qmi-1.so
PRODUCT_PROPERTY_OVERRIDES += \
telephony.lteOnCdmaDevice=0
PRODUCT_PROPERTY_OVERRIDES += \
drm.service.enabled=true
PRODUCT_PROPERTY_OVERRIDES += \
wifi.interface=wlan0 \
wifi.supplicant_scan_interval=15
# Enable AAC 5.1 output
PRODUCT_PROPERTY_OVERRIDES += \
media.aac_51_output_enabled=true
PRODUCT_PROPERTY_OVERRIDES += \
debug.egl.recordable.rgba8888=1
PRODUCT_PROPERTY_OVERRIDES += \
ro.qc.sensors.wl_dis=true \
ro.qualcomm.sensors.smd=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
persist.sys.usb.config=mtp
$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)
$(call inherit-product, hardware/qcom/msm8960/msm8960.mk)