wl1271: Add support for connection quality monitoring
This patch will add support for connection quality monitoring by configuring
rssi triggers to the firmware, and enabling the firmware rssi trigger
functionality.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 5517141..283d5da 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -234,35 +234,6 @@
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
.ps_poll_threshold = 20,
- .sig_trigger_count = 2,
- .sig_trigger = {
- [0] = {
- .threshold = -75,
- .pacing = 500,
- .metric = CONF_TRIG_METRIC_RSSI_BEACON,
- .type = CONF_TRIG_EVENT_TYPE_EDGE,
- .direction = CONF_TRIG_EVENT_DIR_LOW,
- .hysteresis = 2,
- .index = 0,
- .enable = 1
- },
- [1] = {
- .threshold = -75,
- .pacing = 500,
- .metric = CONF_TRIG_METRIC_RSSI_BEACON,
- .type = CONF_TRIG_EVENT_TYPE_EDGE,
- .direction = CONF_TRIG_EVENT_DIR_HIGH,
- .hysteresis = 2,
- .index = 1,
- .enable = 1
- }
- },
- .sig_weights = {
- .rssi_bcn_avg_weight = 10,
- .rssi_pkt_avg_weight = 10,
- .snr_bcn_avg_weight = 10,
- .snr_pkt_avg_weight = 10
- },
.bet_enable = CONF_BET_MODE_ENABLE,
.bet_max_consecutive = 10,
.psm_entry_retries = 3,
@@ -281,6 +252,14 @@
.pm_config = {
.host_clk_settling_time = 5000,
.host_fast_wakeup_support = false
+ },
+ .roam_trigger = {
+ /* FIXME: due to firmware bug, must use value 1 for now */
+ .trigger_pacing = 1,
+ .avg_weight_rssi_beacon = 20,
+ .avg_weight_rssi_data = 10,
+ .avg_weight_snr_beacon = 20,
+ .avg_weight_snr_data = 10
}
};
@@ -1703,6 +1682,18 @@
do_join = true;
}
+ if (changed & BSS_CHANGED_CQM) {
+ bool enable = false;
+ if (bss_conf->cqm_rssi_thold)
+ enable = true;
+ ret = wl1271_acx_rssi_snr_trigger(wl, enable,
+ bss_conf->cqm_rssi_thold,
+ bss_conf->cqm_rssi_hyst);
+ if (ret < 0)
+ goto out;
+ wl->rssi_thold = bss_conf->cqm_rssi_thold;
+ }
+
if ((changed & BSS_CHANGED_BSSID) &&
/*
* Now we know the correct bssid, so we send a new join command
@@ -2283,7 +2274,8 @@
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_UAPSD |
IEEE80211_HW_HAS_RATE_CONTROL |
- IEEE80211_HW_CONNECTION_MONITOR;
+ IEEE80211_HW_CONNECTION_MONITOR |
+ IEEE80211_HW_SUPPORTS_CQM_RSSI;
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);