drm/i915: Share the common work of disabling active FBC before updating
Upon review, all path share the same dependencies for updating the
registers and so we can benefit from sharing the code and checking
early.
This removes the unsightly intel_wait_for_vblank() from the lowlevel
functions and upon further analysis the only path that will require a
wait is if we are performing an instantaneous transition between two
valid FBC configurations. The page-flip path itself will have disabled
FBC registers and will have waited for at least one vblank before
finishing the flip and attempting to re-enable FBC. This wait can be
accomplished simply by delaying the enable until after we are sure that
a vblank will have passed, which we are already doing to make sure that
the display is settled before enabling FBC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index df2839c..b5b15bd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1414,27 +1414,17 @@
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int cfb_pitch;
int plane, i;
u32 fbc_ctl, fbc_ctl2;
- if (fb->pitch == dev_priv->cfb_pitch &&
- obj->fence_reg == dev_priv->cfb_fence &&
- intel_crtc->plane == dev_priv->cfb_plane &&
- I915_READ(FBC_CONTROL) & FBC_CTL_EN)
- return;
-
- i8xx_disable_fbc(dev);
-
- dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
-
- if (fb->pitch < dev_priv->cfb_pitch)
- dev_priv->cfb_pitch = fb->pitch;
+ cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
+ if (fb->pitch < cfb_pitch)
+ cfb_pitch = fb->pitch;
/* FBC_CTL wants 64B units */
- dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
- dev_priv->cfb_fence = obj->fence_reg;
- dev_priv->cfb_plane = intel_crtc->plane;
- plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
+ cfb_pitch = (cfb_pitch / 64) - 1;
+ plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
/* Clear old tags */
for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
@@ -1450,13 +1440,13 @@
fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
if (IS_I945GM(dev))
fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
- fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
+ fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
- fbc_ctl |= dev_priv->cfb_fence;
+ fbc_ctl |= obj->fence_reg;
I915_WRITE(FBC_CONTROL, fbc_ctl);
- DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ",
- dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
+ DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
+ cfb_pitch, crtc->y, intel_crtc->plane);
}
static bool i8xx_fbc_enabled(struct drm_device *dev)
@@ -1478,23 +1468,8 @@
unsigned long stall_watermark = 200;
u32 dpfc_ctl;
- dpfc_ctl = I915_READ(DPFC_CONTROL);
- if (dpfc_ctl & DPFC_CTL_EN) {
- if (dev_priv->cfb_fence == obj->fence_reg &&
- dev_priv->cfb_plane == intel_crtc->plane &&
- dev_priv->cfb_y == crtc->y)
- return;
-
- I915_WRITE(DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN);
- intel_wait_for_vblank(dev, intel_crtc->pipe);
- }
-
- dev_priv->cfb_fence = obj->fence_reg;
- dev_priv->cfb_plane = intel_crtc->plane;
- dev_priv->cfb_y = crtc->y;
-
dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
- dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
+ dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
@@ -1563,27 +1538,11 @@
u32 dpfc_ctl;
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
- if (dpfc_ctl & DPFC_CTL_EN) {
- if (dev_priv->cfb_fence == obj->fence_reg &&
- dev_priv->cfb_plane == intel_crtc->plane &&
- dev_priv->cfb_offset == obj->gtt_offset &&
- dev_priv->cfb_y == crtc->y)
- return;
-
- I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN);
- intel_wait_for_vblank(dev, intel_crtc->pipe);
- }
-
- dev_priv->cfb_fence = obj->fence_reg;
- dev_priv->cfb_plane = intel_crtc->plane;
- dev_priv->cfb_offset = obj->gtt_offset;
- dev_priv->cfb_y = crtc->y;
-
dpfc_ctl &= DPFC_RESERVED;
dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
/* Set persistent mode for front-buffer rendering, ala X. */
dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
- dpfc_ctl |= (DPFC_CTL_FENCE_EN | dev_priv->cfb_fence);
+ dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
@@ -1596,7 +1555,7 @@
if (IS_GEN6(dev)) {
I915_WRITE(SNB_DPFC_CTL_SA,
- SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence);
+ SNB_CPU_FENCE_ENABLE | obj->fence_reg);
I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
sandybridge_blit_fbc_update(dev);
}
@@ -1649,10 +1608,15 @@
/* Double check that we haven't switched fb without cancelling
* the prior work.
*/
- if (work->crtc->fb == work->fb)
+ if (work->crtc->fb == work->fb) {
dev_priv->display.enable_fbc(work->crtc,
work->interval);
+ dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
+ dev_priv->cfb_fb = work->crtc->fb->base.id;
+ dev_priv->cfb_y = work->crtc->y;
+ }
+
dev_priv->fbc_work = NULL;
}
mutex_unlock(&dev->struct_mutex);
@@ -1710,7 +1674,10 @@
DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
/* Delay the actual enabling to let pageflipping cease and the
- * display to settle before starting the compression.
+ * display to settle before starting the compression. Note that
+ * this delay also serves a second purpose: it allows for a
+ * vblank to pass after disabling the FBC before we attempt
+ * to modify the control registers.
*
* A more complicated solution would involve tracking vblanks
* following the termination of the page-flipping sequence
@@ -1730,6 +1697,7 @@
return;
dev_priv->display.disable_fbc(dev);
+ dev_priv->cfb_plane = -1;
}
/**
@@ -1843,6 +1811,44 @@
if (in_dbg_master())
goto out_disable;
+ /* If the scanout has not changed, don't modify the FBC settings.
+ * Note that we make the fundamental assumption that the fb->obj
+ * cannot be unpinned (and have its GTT offset and fence revoked)
+ * without first being decoupled from the scanout and FBC disabled.
+ */
+ if (dev_priv->cfb_plane == intel_crtc->plane &&
+ dev_priv->cfb_fb == fb->base.id &&
+ dev_priv->cfb_y == crtc->y)
+ return;
+
+ if (intel_fbc_enabled(dev)) {
+ /* We update FBC along two paths, after changing fb/crtc
+ * configuration (modeswitching) and after page-flipping
+ * finishes. For the latter, we know that not only did
+ * we disable the FBC at the start of the page-flip
+ * sequence, but also more than one vblank has passed.
+ *
+ * For the former case of modeswitching, it is possible
+ * to switch between two FBC valid configurations
+ * instantaneously so we do need to disable the FBC
+ * before we can modify its control registers. We also
+ * have to wait for the next vblank for that to take
+ * effect. However, since we delay enabling FBC we can
+ * assume that a vblank has passed since disabling and
+ * that we can safely alter the registers in the deferred
+ * callback.
+ *
+ * In the scenario that we go from a valid to invalid
+ * and then back to valid FBC configuration we have
+ * no strict enforcement that a vblank occurred since
+ * disabling the FBC. However, along all current pipe
+ * disabling paths we do need to wait for a vblank at
+ * some point. And we wait before enabling FBC anyway.
+ */
+ DRM_DEBUG_KMS("disabling active FBC for update\n");
+ intel_disable_fbc(dev);
+ }
+
intel_enable_fbc(crtc, 500);
return;