Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (24 commits)
[Blackfin] arch: import defines for BF547 -- it is just like the BF548, but no CAN
[Blackfin] arch: fix build fails only include header files when enabled
[Blackfin] arch: declare default INSTALL_PATH for Blackfin ports
[Blackfin] arch: Encourage users to use the spidev character driver: Provide platform support
[Blackfin] arch: Enable UART2 and UART3 for bf548
[Blackfin] arch: Enable NET2272 on BF561-EZkit - remove request_mem_region
[Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show complete info
[Blackfin] arch: remove duplicated definitions of the line discipline numbers N_* in asm-blackfin/termios.h
[Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys option into the function it actually gets used in
[Blackfin] arch: simpler header and update dates
[Blackfin] arch: move the init sections to the end of memory
[Blackfin] arch: change the trace buffer control start/stop logic in the exception handlers
[Blackfin] arch: fix typo in printk message
[Blackfin] arch: this is an ezkit, not a stamp, so fixup the init function name
[Blackfin] arch: add slightly better help text for CPLB_INFO
[Blackfin] arch: Fix BUG - Enable ISP1362 driver to work ok with BF561
[Blackfin] arch: Fix header file information
[Blackfin] arch: Add Support for ISP1362
[Blackfin] arch: add support for cmdline partitioning to the BF533-STAMP flash map driver and enable it as a module by default
[Blackfin] arch: hook up set_irq_wake in Blackfin's irq code
...
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index ba21e33..368bc7f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -544,7 +544,7 @@
default y
help
If enabled, the entire ASM lowlevel exception and interrupt entry code
- (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
+ (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
(less latency)
config DO_IRQ_L1
@@ -904,29 +904,38 @@
depends on !SMP
choice
- prompt "Select PM Wakeup Event Source"
- default PM_WAKEUP_GPIO_BY_SIC_IWR
+ prompt "Default Power Saving Mode"
depends on PM
+ default PM_BFIN_SLEEP_DEEPER
+config PM_BFIN_SLEEP_DEEPER
+ bool "Sleep Deeper"
help
- If you have a GPIO already configured as input with the corresponding PORTx_MASK
- bit set - "Specify Wakeup Event by SIC_IWR value"
+ Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
+ power dissipation by disabling the clock to the processor core (CCLK).
+ Furthermore, Standby sets the internal power supply voltage (VDDINT)
+ to 0.85 V to provide the greatest power savings, while preserving the
+ processor state.
+ The PLL and system clock (SCLK) continue to operate at a very low
+ frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
+ the SDRAM is put into Self Refresh Mode. Typically an external event
+ such as GPIO interrupt or RTC activity wakes up the processor.
+ Various Peripherals such as UART, SPORT, PPI may not function as
+ normal during Sleep Deeper, due to the reduced SCLK frequency.
+ When in the sleep mode, system DMA access to L1 memory is not supported.
-config PM_WAKEUP_GPIO_BY_SIC_IWR
- bool "Specify Wakeup Event by SIC_IWR value"
-config PM_WAKEUP_BY_GPIO
- bool "Cause Wakeup Event by GPIO"
-config PM_WAKEUP_GPIO_API
- bool "Configure Wakeup Event by PM GPIO API"
-
+config PM_BFIN_SLEEP
+ bool "Sleep"
+ help
+ Sleep Mode (High Power Savings) - The sleep mode reduces power
+ dissipation by disabling the clock to the processor core (CCLK).
+ The PLL and system clock (SCLK), however, continue to operate in
+ this mode. Typically an external event or RTC activity will wake
+ up the processor. When in the sleep mode,
+ system DMA access to L1 memory is not supported.
endchoice
-config PM_WAKEUP_SIC_IWR
- hex "Wakeup Events (SIC_IWR)"
- depends on PM_WAKEUP_GPIO_BY_SIC_IWR
- default 0x8 if (BF537 || BF536 || BF534)
- default 0x80 if (BF533 || BF532 || BF531)
- default 0x80 if (BF54x)
- default 0x80 if (BF52x)
+config PM_WAKEUP_BY_GPIO
+ bool "Cause Wakeup Event by GPIO"
config PM_WAKEUP_GPIO_NUMBER
int "Wakeup GPIO number"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 59b87a4..c61bdeb 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -164,7 +164,7 @@
config CPLB_INFO
bool "Display the CPLB information"
help
- Display the CPLB information.
+ Display the CPLB information via /proc/cplbinfo.
config ACCESS_CHECK
bool "Check the user pointer address"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 0edc402..fe254f8 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -119,6 +119,7 @@
$(Q)$(MAKE) $(clean)=$(boot)
+INSTALL_PATH ?= /tftpboot
boot := arch/$(ARCH)/boot
BOOT_TARGETS = vmImage
PHONY += $(BOOT_TARGETS) install
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9b7123c..198f412 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -216,8 +216,6 @@
CONFIG_MEM_ADD_WIDTH=11
CONFIG_ENET_FLASH_PIN=0
CONFIG_BOOT_LOAD=0x1000
-
-
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -483,7 +481,7 @@
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
#
# User Modules And Translation Layers
@@ -500,8 +498,8 @@
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -515,8 +513,9 @@
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
@@ -526,6 +525,11 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BF5xx=m
+CONFIG_BFIN_FLASH_BANK_0=0x7BB0
+CONFIG_BFIN_FLASH_BANK_1=0x7BB0
+CONFIG_BFIN_FLASH_BANK_2=0x7BB0
+CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index fa9debe8..5453bc3 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -104,6 +104,16 @@
mutex_unlock(&(dma_ch[channel].dmalock));
+#ifdef CONFIG_BF54x
+ if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
+ strncmp(device_id, "BFIN_UART", 9) == 0)
+ dma_ch[channel].regs->peripheral_map |=
+ (channel - CH_UART2_RX + 0xC);
+ else
+ dma_ch[channel].regs->peripheral_map |=
+ (channel - CH_UART2_RX + 0x6);
+#endif
+
dma_ch[channel].device_id = device_id;
dma_ch[channel].irq_callback = NULL;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 6bbe0a2..08788f7 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,7 @@
char name[RESOURCE_LABEL_SIZE];
} str_ident[MAX_RESOURCES];
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -696,9 +696,8 @@
return 0;
}
-u32 gpio_pm_setup(void)
+u32 bfin_pm_setup(void)
{
- u32 sic_iwr = 0;
u16 bank, mask, i, gpio;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
@@ -723,7 +722,8 @@
gpio = i;
while (mask) {
- if (mask & 1) {
+ if ((mask & 1) && (wakeup_flags_map[gpio] !=
+ PM_WAKE_IGNORE)) {
reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
@@ -734,21 +734,17 @@
mask >>= 1;
}
- sic_iwr |= 1 <<
- (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+ bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
}
}
AWA_DUMMY_READ(maskb_set);
- if (sic_iwr)
- return sic_iwr;
- else
- return IWR_ENABLE_ALL;
+ return 0;
}
-void gpio_pm_restore(void)
+void bfin_pm_restore(void)
{
u16 bank, mask, i;
@@ -768,7 +764,7 @@
reserved_gpio_map[bank] =
gpio_bank_saved[bank].reserved;
-
+ bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
}
gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index e2e2b50..dc6e8a7 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -26,6 +26,10 @@
#include <asm/cplb.h>
#include <asm/cplbinit.h>
+#if ANOMALY_05000263
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
struct cplb_entry icplb_tbl[MAX_CPLBS];
struct cplb_entry dcplb_tbl[MAX_CPLBS];
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 673c860..c640154 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -57,5 +57,5 @@
* "init_task" linker map entry.
*/
union thread_union init_thread_union
- __attribute__ ((__section__(".data.init_task"))) = {
+ __attribute__ ((__section__(".init_task.data"))) = {
INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 289ea9d..8229b10 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,30 +1,11 @@
/*
- * File: arch/blackfin/kernel/setup.c
- * Based on:
- * Author:
+ * arch/blackfin/kernel/setup.c
*
- * Created:
- * Description:
+ * Copyright 2004-2006 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
@@ -34,6 +15,7 @@
#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/pfn.h>
#include <linux/ext2_fs.h>
#include <linux/cramfs_fs.h>
@@ -47,6 +29,8 @@
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
u16 _bfin_swrst;
unsigned long memory_start, memory_end, physical_mem_end;
@@ -67,6 +51,29 @@
char __initdata command_line[COMMAND_LINE_SIZE];
+/* boot memmap, for parsing "memmap=" */
+#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
+#define BFIN_MEMMAP_RAM 1
+#define BFIN_MEMMAP_RESERVED 2
+struct bfin_memmap {
+ int nr_map;
+ struct bfin_memmap_entry {
+ unsigned long long addr; /* start of memory segment */
+ unsigned long long size;
+ unsigned long type;
+ } map[BFIN_MEMMAP_MAX];
+} bfin_memmap __initdata;
+
+/* for memmap sanitization */
+struct change_member {
+ struct bfin_memmap_entry *pentry; /* pointer to original entry */
+ unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
+static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
+
void __init bf53x_cache_init(void)
{
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
@@ -123,12 +130,224 @@
}
+/* add_memory_region to memmap */
+static void __init add_memory_region(unsigned long long start,
+ unsigned long long size, int type)
+{
+ int i;
+
+ i = bfin_memmap.nr_map;
+
+ if (i == BFIN_MEMMAP_MAX) {
+ printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+ return;
+ }
+
+ bfin_memmap.map[i].addr = start;
+ bfin_memmap.map[i].size = size;
+ bfin_memmap.map[i].type = type;
+ bfin_memmap.nr_map++;
+}
+
+/*
+ * Sanitize the boot memmap, removing overlaps.
+ */
+static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
+{
+ struct change_member *change_tmp;
+ unsigned long current_type, last_type;
+ unsigned long long last_addr;
+ int chgidx, still_changing;
+ int overlap_entries;
+ int new_entry;
+ int old_nr, new_nr, chg_nr;
+ int i;
+
+ /*
+ Visually we're performing the following (1,2,3,4 = memory types)
+
+ Sample memory map (w/overlaps):
+ ____22__________________
+ ______________________4_
+ ____1111________________
+ _44_____________________
+ 11111111________________
+ ____________________33__
+ ___________44___________
+ __________33333_________
+ ______________22________
+ ___________________2222_
+ _________111111111______
+ _____________________11_
+ _________________4______
+
+ Sanitized equivalent (no overlap):
+ 1_______________________
+ _44_____________________
+ ___1____________________
+ ____22__________________
+ ______11________________
+ _________1______________
+ __________3_____________
+ ___________44___________
+ _____________33_________
+ _______________2________
+ ________________1_______
+ _________________4______
+ ___________________2____
+ ____________________33__
+ ______________________4_
+ */
+ /* if there's only one memory region, don't bother */
+ if (*pnr_map < 2)
+ return -1;
+
+ old_nr = *pnr_map;
+
+ /* bail out if we find any unreasonable addresses in memmap */
+ for (i = 0; i < old_nr; i++)
+ if (map[i].addr + map[i].size < map[i].addr)
+ return -1;
+
+ /* create pointers for initial change-point information (for sorting) */
+ for (i = 0; i < 2*old_nr; i++)
+ change_point[i] = &change_point_list[i];
+
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
+ chgidx = 0;
+ for (i = 0; i < old_nr; i++) {
+ if (map[i].size != 0) {
+ change_point[chgidx]->addr = map[i].addr;
+ change_point[chgidx++]->pentry = &map[i];
+ change_point[chgidx]->addr = map[i].addr + map[i].size;
+ change_point[chgidx++]->pentry = &map[i];
+ }
+ }
+ chg_nr = chgidx; /* true number of change-points */
+
+ /* sort change-point list by memory addresses (low -> high) */
+ still_changing = 1;
+ while (still_changing) {
+ still_changing = 0;
+ for (i = 1; i < chg_nr; i++) {
+ /* if <current_addr> > <last_addr>, swap */
+ /* or, if current=<start_addr> & last=<end_addr>, swap */
+ if ((change_point[i]->addr < change_point[i-1]->addr) ||
+ ((change_point[i]->addr == change_point[i-1]->addr) &&
+ (change_point[i]->addr == change_point[i]->pentry->addr) &&
+ (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
+ ) {
+ change_tmp = change_point[i];
+ change_point[i] = change_point[i-1];
+ change_point[i-1] = change_tmp;
+ still_changing = 1;
+ }
+ }
+ }
+
+ /* create a new memmap, removing overlaps */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_entry = 0; /* index for creating new memmap entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
+ /* loop through change-points, determining affect on the new memmap */
+ for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+ /* keep track of all overlapping memmap entries */
+ if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
+ /* add map entry to overlap list (> 1 entry implies an overlap) */
+ overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
+ } else {
+ /* remove entry from list (order independent, so swap with last) */
+ for (i = 0; i < overlap_entries; i++) {
+ if (overlap_list[i] == change_point[chgidx]->pentry)
+ overlap_list[i] = overlap_list[overlap_entries-1];
+ }
+ overlap_entries--;
+ }
+ /* if there are overlapping entries, decide which "type" to use */
+ /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+ current_type = 0;
+ for (i = 0; i < overlap_entries; i++)
+ if (overlap_list[i]->type > current_type)
+ current_type = overlap_list[i]->type;
+ /* continue building up new memmap based on this information */
+ if (current_type != last_type) {
+ if (last_type != 0) {
+ new_map[new_entry].size =
+ change_point[chgidx]->addr - last_addr;
+ /* move forward only if the new size was non-zero */
+ if (new_map[new_entry].size != 0)
+ if (++new_entry >= BFIN_MEMMAP_MAX)
+ break; /* no more space left for new entries */
+ }
+ if (current_type != 0) {
+ new_map[new_entry].addr = change_point[chgidx]->addr;
+ new_map[new_entry].type = current_type;
+ last_addr = change_point[chgidx]->addr;
+ }
+ last_type = current_type;
+ }
+ }
+ new_nr = new_entry; /* retain count for new entries */
+
+ /* copy new mapping into original location */
+ memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
+ *pnr_map = new_nr;
+
+ return 0;
+}
+
+static void __init print_memory_map(char *who)
+{
+ int i;
+
+ for (i = 0; i < bfin_memmap.nr_map; i++) {
+ printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
+ bfin_memmap.map[i].addr,
+ bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
+ switch (bfin_memmap.map[i].type) {
+ case BFIN_MEMMAP_RAM:
+ printk("(usable)\n");
+ break;
+ case BFIN_MEMMAP_RESERVED:
+ printk("(reserved)\n");
+ break;
+ default: printk("type %lu\n", bfin_memmap.map[i].type);
+ break;
+ }
+ }
+}
+
+static __init int parse_memmap(char *arg)
+{
+ unsigned long long start_at, mem_size;
+
+ if (!arg)
+ return -EINVAL;
+
+ mem_size = memparse(arg, &arg);
+ if (*arg == '@') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
+ } else if (*arg == '$') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
+ }
+
+ return 0;
+}
+
/*
* Initial parsing of the command line. Currently, we support:
* - Controlling the linux memory size: mem=xxx[KMG]
* - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
* $ -> reserved memory is dcacheable
* # -> reserved memory is icacheable
+ * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
+ * @ from <start> to <start>+<mem>, type RAM
+ * $ from <start> to <start>+<mem>, type RESERVED
+ *
*/
static __init void parse_cmdline_early(char *cmdline_p)
{
@@ -136,7 +355,6 @@
unsigned int memsize;
for (;;) {
if (c == ' ') {
-
if (!memcmp(to, "mem=", 4)) {
to += 4;
memsize = memparse(to, &to);
@@ -162,6 +380,9 @@
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
+ } else if (!memcmp(to, "memmap=", 7)) {
+ to += 7;
+ parse_memmap(to);
}
}
c = *(to++);
@@ -170,75 +391,36 @@
}
}
-void __init setup_arch(char **cmdline_p)
+/*
+ * Setup memory defaults from user config.
+ * The physical memory layout looks like:
+ *
+ * [_rambase, _ramstart]: kernel image
+ * [memory_start, memory_end]: dynamic memory managed by kernel
+ * [memory_end, _ramend]: reserved memory
+ * [meory_mtd_start(memory_end),
+ * memory_mtd_start + mtd_size]: rootfs (if any)
+ * [_ramend - DMA_UNCACHED_REGION,
+ * _ramend]: uncached DMA region
+ * [_ramend, physical_mem_end]: memory not managed by kernel
+ *
+ */
+static __init void memory_setup(void)
{
- int bootmap_size;
- unsigned long l1_length, sclk, cclk;
#ifdef CONFIG_MTD_UCLINUX
unsigned long mtd_phys = 0;
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
+ _rambase = (unsigned long)_stext;
+ _ramstart = (unsigned long)_end;
-#if defined(CONFIG_CMDLINE_BOOL)
- strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
-
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
-
- parse_cmdline_early(&command_line[0]);
-
- cclk = get_cclk();
- sclk = get_sclk();
-
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
- if (ANOMALY_05000273 && cclk == sclk)
- panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
-
-#ifdef BF561_FAMILY
- if (ANOMALY_05000266) {
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
+ if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
+ console_init();
+ panic("DMA region exceeds memory limit: %lu.\n",
+ _ramend - _ramstart);
}
-#endif
-
- printk(KERN_INFO "Hardware Trace ");
- if (bfin_read_TBUFCTL() & 0x1 )
- printk("Active ");
- else
- printk("Off ");
- if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
- else
- printk("and Disabled\n");
-
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
- /* we need to initialize the Flashrom device here since we might
- * do things with flash early on in the boot
- */
- flash_probe();
-#endif
-
- if (physical_mem_end == 0)
- physical_mem_end = _ramend;
-
- /* by now the stack is part of the init task */
memory_end = _ramend - DMA_UNCACHED_REGION;
- _ramstart = (unsigned long)__bss_stop;
- _rambase = (unsigned long)_stext;
#ifdef CONFIG_MPU
/* Round up to multiple of 4MB. */
memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
@@ -292,7 +474,7 @@
}
/* Relocate MTD image to the top of memory after the uncached memory area */
- dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+ dma_memcpy((char *)memory_end, _end, mtd_size);
memory_mtd_start = memory_end;
_ebss = memory_mtd_start; /* define _ebss for compatible */
@@ -319,13 +501,175 @@
#endif
#if !defined(CONFIG_MTD_UCLINUX)
- memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+ /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+ memory_end -= SIZE_4K;
#endif
+
init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)0;
+ printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
+ printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+
+ printk(KERN_INFO "Memory map:\n"
+ KERN_INFO " text = 0x%p-0x%p\n"
+ KERN_INFO " rodata = 0x%p-0x%p\n"
+ KERN_INFO " bss = 0x%p-0x%p\n"
+ KERN_INFO " data = 0x%p-0x%p\n"
+ KERN_INFO " stack = 0x%p-0x%p\n"
+ KERN_INFO " init = 0x%p-0x%p\n"
+ KERN_INFO " available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+ KERN_INFO " rootfs = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+ KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+#endif
+ , _stext, _etext,
+ __start_rodata, __end_rodata,
+ __bss_start, __bss_stop,
+ _sdata, _edata,
+ (void *)&init_thread_union,
+ (void *)((int)(&init_thread_union) + 0x2000),
+ __init_begin, __init_end,
+ (void *)_ramstart, (void *)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+ , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+ , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
+#endif
+ );
+}
+
+static __init void setup_bootmem_allocator(void)
+{
+ int bootmap_size;
+ int i;
+ unsigned long min_pfn, max_pfn;
+ unsigned long curr_pfn, last_pfn, size;
+
+ /* mark memory between memory_start and memory_end usable */
+ add_memory_region(memory_start,
+ memory_end - memory_start, BFIN_MEMMAP_RAM);
+ /* sanity check for overlap */
+ sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
+ print_memory_map("boot memmap");
+
+ min_pfn = PAGE_OFFSET >> PAGE_SHIFT;
+ max_pfn = memory_end >> PAGE_SHIFT;
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory.
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0),
+ memory_start >> PAGE_SHIFT, /* map goes here */
+ min_pfn, max_pfn);
+
+ /* register the memmap regions with the bootmem allocator */
+ for (i = 0; i < bfin_memmap.nr_map; i++) {
+ /*
+ * Reserve usable memory
+ */
+ if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+ continue;
+ /*
+ * We are rounding up the start address of usable memory:
+ */
+ curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
+ if (curr_pfn >= max_pfn)
+ continue;
+ /*
+ * ... and at the end of the usable range downwards:
+ */
+ last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
+ bfin_memmap.map[i].size);
+
+ if (last_pfn > max_pfn)
+ last_pfn = max_pfn;
+
+ /*
+ * .. finally, did all the rounding and playing
+ * around just make the area go away?
+ */
+ if (last_pfn <= curr_pfn)
+ continue;
+
+ size = last_pfn - curr_pfn;
+ free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+ }
+
+ /* reserve memory before memory_start, including bootmap */
+ reserve_bootmem(PAGE_OFFSET,
+ memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET,
+ BOOTMEM_DEFAULT);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long l1_length, sclk, cclk;
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+
+ parse_cmdline_early(&command_line[0]);
+
+ if (physical_mem_end == 0)
+ physical_mem_end = _ramend;
+
+ memory_setup();
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
+ panic("ANOMALY 05000273, SCLK can not be same as CCLK");
+#endif
+
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
+#endif
+ printk(KERN_INFO "Hardware Trace ");
+ if (bfin_read_TBUFCTL() & 0x1)
+ printk("Active ");
+ else
+ printk("Off ");
+ if (bfin_read_TBUFCTL() & 0x2)
+ printk("and Enabled\n");
+ else
+ printk("and Disabled\n");
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+ /* we need to initialize the Flashrom device here since we might
+ * do things with flash early on in the boot
+ */
+ flash_probe();
+#endif
+
_bfin_swrst = bfin_read_SWRST();
if (_bfin_swrst & RESET_DOUBLE)
@@ -335,7 +679,7 @@
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
- printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
+ printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
else if (bfin_compiled_revid() == -1)
@@ -361,55 +705,8 @@
if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
- printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
- printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+ setup_bootmem_allocator();
- printk(KERN_INFO "Memory map:\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
-#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
-#endif
-#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
-#endif
- , _stext, _etext,
- __start_rodata, __end_rodata,
- _sdata, _edata,
- (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000),
- __init_begin, __init_end,
- __bss_start, __bss_stop,
- (void *)_ramstart, (void *)memory_end
-#ifdef CONFIG_MTD_UCLINUX
- , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
-#endif
-#if DMA_UNCACHED_REGION > 0
- , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
-#endif
- );
-
- /*
- * give all the memory to the bootmap allocator, tell it to put the
- * boot mem_map at the start of memory
- */
- bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */
- PAGE_OFFSET >> PAGE_SHIFT,
- memory_end >> PAGE_SHIFT);
- /*
- * free the usable memory, we have to make sure we do not free
- * the bootmem bitmap so we then reserve it after freeing it :-)
- */
- free_bootmem(memory_start, memory_end - memory_start);
-
- reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
- /*
- * get kmalloc into gear
- */
paging_init();
/* check the size of the l1 area */
@@ -450,15 +747,15 @@
static int __init topology_init(void)
{
-#if defined (CONFIG_BF561)
- static struct cpu cpu[2];
- register_cpu(&cpu[0], 0);
- register_cpu(&cpu[1], 1);
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+ register_cpu(c, cpu);
+ }
+
return 0;
-#else
- static struct cpu cpu[1];
- return register_cpu(cpu, 0);
-#endif
}
subsys_initcall(topology_init);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 66b5f3e..58717cb 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -649,7 +649,7 @@
if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
printk(KERN_NOTICE "HW Error context\n");
else if (context & 0x0020)
- printk(KERN_NOTICE "Defered Exception context\n");
+ printk(KERN_NOTICE "Deferred Exception context\n");
else if (context & 0x3FC0)
printk(KERN_NOTICE "Interrupt context\n");
else if (context & 0x4000)
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 8587224..aed8325 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -41,6 +41,9 @@
SECTIONS
{
. = CONFIG_BOOT_LOAD;
+ /* Neither the text, ro_data or bss section need to be aligned
+ * So pack them back to back
+ */
.text :
{
__text = .;
@@ -58,22 +61,25 @@
*(__ex_table)
___stop___ex_table = .;
- . = ALIGN(4);
__etext = .;
}
- RO_DATA(PAGE_SIZE)
+ /* Just in case the first read only is a 32-bit access */
+ RO_DATA(4)
+
+ .bss :
+ {
+ . = ALIGN(4);
+ ___bss_start = .;
+ *(.bss .bss.*)
+ *(COMMON)
+ ___bss_stop = .;
+ }
.data :
{
- /* make sure the init_task is aligned to the
- * kernel thread size so we can locate the kernel
- * stack properly and quickly.
- */
__sdata = .;
- . = ALIGN(THREAD_SIZE);
- *(.data.init_task)
-
+ /* This gets done first, so the glob doesn't suck it in */
. = ALIGN(32);
*(.data.cacheline_aligned)
@@ -81,10 +87,22 @@
*(.data.*)
CONSTRUCTORS
+ /* make sure the init_task is aligned to the
+ * kernel thread size so we can locate the kernel
+ * stack properly and quickly.
+ */
. = ALIGN(THREAD_SIZE);
+ *(.init_task.data)
+
__edata = .;
}
+ /* The init section should be last, so when we free it, it goes into
+ * the general memory pool, and (hopefully) will decrease fragmentation
+ * a tiny bit. The init section has a _requirement_ that it be
+ * PAGE_SIZE aligned
+ */
+ . = ALIGN(PAGE_SIZE);
___init_begin = .;
.init.text :
@@ -179,16 +197,7 @@
. = ALIGN(PAGE_SIZE);
___init_end = .;
- .bss :
- {
- . = ALIGN(4);
- ___bss_start = .;
- *(.bss .bss.*)
- *(COMMON)
- . = ALIGN(4);
- ___bss_stop = .;
- __end = .;
- }
+ __end =.;
STABS_DEBUG
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 1795aab..337515f 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -41,7 +41,9 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
+#endif
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
@@ -517,6 +519,14 @@
.bits_per_word = 16,
};
#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -634,6 +644,15 @@
.mode = SPI_MODE_0,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI controller data */
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4026c2f..2b09aa3 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -34,7 +34,9 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
@@ -134,6 +136,13 @@
};
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
{
@@ -168,6 +177,15 @@
.controller_data = &ad1836_spi_chip_info,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 0185350..a645f6f 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -226,6 +226,13 @@
};
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
{
@@ -312,6 +319,15 @@
.mode = SPI_MODE_2,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI (0) */
@@ -423,9 +439,9 @@
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
- {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
- {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
- {BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"},
+ {BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PF6, 0, "gpio-keys: BTN1"},
+ {BTN_2, GPIO_PF8, 0, "gpio-keys: BTN2"},
};
static struct gpio_keys_platform_data bfin_gpio_keys_data = {
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 119e6ea..9e2277e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -487,6 +487,13 @@
};
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -593,6 +600,15 @@
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI controller data */
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 14860f0..916e963 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -37,7 +37,9 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
+#endif
#include <asm/bfin5xx_spi.h>
#include <asm/cplb.h>
#include <asm/dma.h>
@@ -420,6 +422,13 @@
};
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -445,6 +454,15 @@
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI (0) */
@@ -631,7 +649,7 @@
&ezkit_flash_device,
};
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
@@ -644,4 +662,4 @@
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 957bf13..374803a 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -1,5 +1,5 @@
/*
- * File: arch/blackfin/mach-bf561/dma.c
+ * File: arch/blackfin/mach-bf548/dma.c
* Based on:
* Author:
*
@@ -7,7 +7,7 @@
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Modified:
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ed863ce..43c1b09 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -92,6 +92,68 @@
arch_initcall(bfin_isp1761_init);
#endif
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x2c060000,
+ .end = 0x2c060000,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0x2c060004,
+ .end = 0x2c060004,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF8,
+ .end = IRQ_PF8,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x2C000000,
+ .end = 0x2C000000 + 0x7F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
@@ -204,6 +266,13 @@
.bits_per_word = 16,
};
#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
#endif
/* SPI (0) */
@@ -248,6 +317,15 @@
.controller_data = &ad1836_spi_chip_info,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
@@ -340,6 +418,10 @@
&ax88180_device,
#endif
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
@@ -359,6 +441,11 @@
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
&ezkit_flash_device,
};
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 8636d42..15e33ca 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -4,8 +4,6 @@
obj-y := \
cache.o cacheinit.o entry.o \
- interrupt.o lock.o irqpanic.o arch_checks.o
+ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
-obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
-obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
obj-$(CONFIG_PM) += pm.o dpmc.o
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index b82c096..b80ddd8 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -191,6 +191,9 @@
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
P0.H = hi(PLL_CTL);
@@ -237,6 +240,10 @@
CLI R4;
+ R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
call _set_dram_srfs;
@@ -261,6 +268,9 @@
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
P0.H = hi(PLL_CTL);
@@ -286,7 +296,13 @@
CLI R4;
P3 = R0;
+ P4 = R1;
+ P5 = R2;
+
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
call _set_dram_srfs; /* Set SDRAM Self Refresh */
@@ -327,6 +343,8 @@
call _test_pll_locked;
R0 = P3;
+ R1 = P4;
+ R3 = P5;
call _set_sic_iwr; /* Set Awake from IDLE */
P0.H = hi(PLL_CTL);
@@ -340,6 +358,9 @@
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr; /* Set Awake from IDLE PLL */
P0.H = hi(VR_CTL);
@@ -417,14 +438,23 @@
RTS;
ENTRY(_set_sic_iwr)
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
P0.H = hi(SIC_IWR0);
P0.L = lo(SIC_IWR0);
+ P1.H = hi(SIC_IWR1);
+ P1.L = lo(SIC_IWR1);
+ [P1] = R1;
+#if defined(CONFIG_BF54x)
+ P1.H = hi(SIC_IWR2);
+ P1.L = lo(SIC_IWR2);
+ [P1] = R2;
+#endif
#else
P0.H = hi(SIC_IWR);
P0.L = lo(SIC_IWR);
#endif
[P0] = R0;
+
SSYNC;
RTS;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fdd9bf4..2cbb7a0 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -121,6 +121,7 @@
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SAVE_ALL_SYS
+ DEBUG_HWTRACE_SAVE(p5, r7)
#ifdef CONFIG_MPU
R0 = SEQSTAT;
R1 = SP;
@@ -132,14 +133,13 @@
#else
call __cplb_hdr;
#endif
- DEBUG_START_HWTRACE(p5, r7)
+ DEBUG_HWTRACE_RESTORE(p5, r7)
RESTORE_ALL_SYS
SP = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_icplb_miss)
ENTRY(_ex_syscall)
- DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
@@ -178,7 +178,6 @@
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
- DEBUG_START_HWTRACE(p5, r7)
#if ANOMALY_05000257
R7=LC0;
LC0=R7;
@@ -200,10 +199,9 @@
* need to make a CPLB exception look like a normal exception
*/
- DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
[--sp] = ASTAT;
- [--sp] = (R7:6, P5:4);
+ [--sp] = (R7:6,P5:4);
ENTRY(_ex_replaceable)
nop;
@@ -253,7 +251,6 @@
R6 = SEQSTAT;
[P5] = R6;
- DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SP = EX_SCRATCH_REG;
@@ -382,8 +379,7 @@
sp.h = _exception_stack_top;
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
- [--sp] = (R7:6, P5:4);
- DEBUG_STOP_HWTRACE(p5, r7)
+ [--sp] = (R7:6,P5:4);
r7 = SEQSTAT; /* reason code is in bit 5:0 */
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
deleted file mode 100644
index 8d18d6b..0000000
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * File: arch/blackfin/mach-common/ints-priority-dc.c
- * Based on:
- * Author:
- *
- * Created: ?
- * Description: Set up the interrupt priorities
- *
- * Modified:
- * 1996 Roman Zippel
- * 1999 D. Jeff Dionne <jeff@uclinux.org>
- * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- * 2003 Metrowerks/Motorola
- * 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-#ifdef CONFIG_KGDB
-#include <linux/kgdb.h>
-#endif
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/irq_handler.h>
-
-/*
- * NOTES:
- * - we have separated the physical Hardware interrupt from the
- * levels that the LINUX kernel sees (see the description in irq.h)
- * -
- */
-
-/* Initialize this to an actual value to force it into the .data
- * section so that we know it is properly initialized at entry into
- * the kernel but before bss is initialized to zero (which is where
- * it would live otherwise). The 0x1f magic represents the IRQs we
- * cannot actually mask out in hardware.
- */
-unsigned long irq_flags = 0x1f;
-
-/* The number of spurious interrupts */
-atomic_t num_spurious;
-
-struct ivgx {
- /* irq number for request_irq, available in mach-bf561/irq.h */
- int irqno;
- /* corresponding bit in the SICA_ISR0 register */
- int isrflag0;
- /* corresponding bit in the SICA_ISR1 register */
- int isrflag1;
-} ivg_table[NR_PERI_INTS];
-
-struct ivg_slice {
- /* position of first irq in ivg_table for given ivg */
- struct ivgx *ifirst;
- struct ivgx *istop;
-} ivg7_13[IVG13 - IVG7 + 1];
-
-static void search_IAR(void);
-
-/*
- * Search SIC_IAR and fill tables with the irqvalues
- * and their positions in the SIC_ISR register.
- */
-static void __init search_IAR(void)
-{
- unsigned ivg, irq_pos = 0;
- for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
- int irqn;
-
- ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
-
- for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
- int iar_shift = (irqn & 7) * 4;
- if (ivg ==
- (0xf &
- bfin_read32((unsigned long *)SICA_IAR0 +
- (irqn >> 3)) >> iar_shift)) {
- ivg_table[irq_pos].irqno = IVG7 + irqn;
- ivg_table[irq_pos].isrflag0 =
- (irqn < 32 ? (1 << irqn) : 0);
- ivg_table[irq_pos].isrflag1 =
- (irqn < 32 ? 0 : (1 << (irqn - 32)));
- ivg7_13[ivg].istop++;
- irq_pos++;
- }
- }
- }
-}
-
-/*
- * This is for BF561 internal IRQs
- */
-
-static void ack_noop(unsigned int irq)
-{
- /* Dummy function. */
-}
-
-static void bf561_core_mask_irq(unsigned int irq)
-{
- irq_flags &= ~(1 << irq);
- if (!irqs_disabled())
- local_irq_enable();
-}
-
-static void bf561_core_unmask_irq(unsigned int irq)
-{
- irq_flags |= 1 << irq;
- /*
- * If interrupts are enabled, IMASK must contain the same value
- * as irq_flags. Make sure that invariant holds. If interrupts
- * are currently disabled we need not do anything; one of the
- * callers will take care of setting IMASK to the proper value
- * when reenabling interrupts.
- * local_irq_enable just does "STI irq_flags", so it's exactly
- * what we need.
- */
- if (!irqs_disabled())
- local_irq_enable();
- return;
-}
-
-static void bf561_internal_mask_irq(unsigned int irq)
-{
- unsigned long irq_mask;
- if ((irq - (IRQ_CORETMR + 1)) < 32) {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
- bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask);
- } else {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
- bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask);
- }
-}
-
-static void bf561_internal_unmask_irq(unsigned int irq)
-{
- unsigned long irq_mask;
-
- if ((irq - (IRQ_CORETMR + 1)) < 32) {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
- bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask);
- } else {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
- bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask);
- }
- SSYNC();
-}
-
-static struct irq_chip bf561_core_irqchip = {
- .ack = ack_noop,
- .mask = bf561_core_mask_irq,
- .unmask = bf561_core_unmask_irq,
-};
-
-static struct irq_chip bf561_internal_irqchip = {
- .ack = ack_noop,
- .mask = bf561_internal_mask_irq,
- .unmask = bf561_internal_unmask_irq,
-};
-
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-static void bf561_gpio_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-}
-
-static void bf561_gpio_mask_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-
- set_gpio_maska(gpionr, 0);
- SSYNC();
-}
-
-static void bf561_gpio_mask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 0);
- SSYNC();
-}
-
-static void bf561_gpio_unmask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 1);
- SSYNC();
-}
-
-static unsigned int bf561_gpio_irq_startup(unsigned int irq)
-{
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq - IRQ_PF0;
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
-
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- bf561_gpio_unmask_irq(irq);
-
- return ret;
-
-}
-
-static void bf561_gpio_irq_shutdown(unsigned int irq)
-{
- bf561_gpio_mask_irq(irq);
- gpio_free(irq - IRQ_PF0);
- gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
-}
-
-static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq - IRQ_PF0;
-
-
- if (type == IRQ_TYPE_PROBE) {
- /* only probe unenabled GPIO interrupt lines */
- if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-
- }
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
- IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
-
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- } else {
- gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- return 0;
- }
-
-
- set_gpio_dir(gpionr, 0);
- set_gpio_inen(gpionr, 1);
-
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- set_gpio_edge(gpionr, 1);
- } else {
- set_gpio_edge(gpionr, 0);
- gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- }
-
- if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_gpio_both(gpionr, 1);
- else
- set_gpio_both(gpionr, 0);
-
- if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
- set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
- else
- set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
-
- SSYNC();
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_irq_handler(irq, handle_edge_irq);
- else
- set_irq_handler(irq, handle_level_irq);
-
- return 0;
-}
-
-static struct irq_chip bf561_gpio_irqchip = {
- .ack = bf561_gpio_ack_irq,
- .mask = bf561_gpio_mask_irq,
- .mask_ack = bf561_gpio_mask_ack_irq,
- .unmask = bf561_gpio_unmask_irq,
- .set_type = bf561_gpio_irq_type,
- .startup = bf561_gpio_irq_startup,
- .shutdown = bf561_gpio_irq_shutdown
-};
-
-static void bf561_demux_gpio_irq(unsigned int inta_irq,
- struct irq_desc *intb_desc)
-{
- int irq, flag_d, mask;
- u16 gpio;
-
- switch (inta_irq) {
- case IRQ_PROG0_INTA:
- irq = IRQ_PF0;
- break;
- case IRQ_PROG1_INTA:
- irq = IRQ_PF16;
- break;
- case IRQ_PROG2_INTA:
- irq = IRQ_PF32;
- break;
- default:
- dump_stack();
- return;
- }
-
- gpio = irq - IRQ_PF0;
-
- flag_d = get_gpiop_data(gpio);
- mask = flag_d & (gpio_enabled[gpio_bank(gpio)] &
- get_gpiop_maska(gpio));
-
- do {
- if (mask & 1) {
- struct irq_desc *desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- }
- irq++;
- mask >>= 1;
- } while (mask);
-
-
-}
-
-void __init init_exception_vectors(void)
-{
- SSYNC();
-
- /* cannot program in software:
- * evt0 - emulation (jtag)
- * evt1 - reset
- */
- bfin_write_EVT2(evt_nmi);
- bfin_write_EVT3(trap);
- bfin_write_EVT5(evt_ivhw);
- bfin_write_EVT6(evt_timer);
- bfin_write_EVT7(evt_evt7);
- bfin_write_EVT8(evt_evt8);
- bfin_write_EVT9(evt_evt9);
- bfin_write_EVT10(evt_evt10);
- bfin_write_EVT11(evt_evt11);
- bfin_write_EVT12(evt_evt12);
- bfin_write_EVT13(evt_evt13);
- bfin_write_EVT14(evt14_softirq);
- bfin_write_EVT15(evt_system_call);
- CSYNC();
-}
-
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
-{
- int irq;
- unsigned long ilat = 0;
- /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
- bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
- bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
- SSYNC();
-
- bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
- bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
- local_irq_disable();
-
- init_exception_buff();
-
- for (irq = 0; irq <= SYS_IRQS; irq++) {
- if (irq <= IRQ_CORETMR)
- set_irq_chip(irq, &bf561_core_irqchip);
- else
- set_irq_chip(irq, &bf561_internal_irqchip);
-
- if ((irq != IRQ_PROG0_INTA) &&
- (irq != IRQ_PROG1_INTA) &&
- (irq != IRQ_PROG2_INTA))
- set_irq_handler(irq, handle_simple_irq);
- else
- set_irq_chained_handler(irq, bf561_demux_gpio_irq);
- }
-
- for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
- set_irq_chip(irq, &bf561_gpio_irqchip);
- /* if configured as edge, then will be changed to do_edge_IRQ */
- set_irq_handler(irq, handle_level_irq);
- }
-
- bfin_write_IMASK(0);
- CSYNC();
- ilat = bfin_read_ILAT();
- CSYNC();
- bfin_write_ILAT(ilat);
- CSYNC();
-
- printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
- /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
- * local_irq_enable()
- */
- program_IAR();
- /* Therefore it's better to setup IARs before interrupts enabled */
- search_IAR();
-
- /* Enable interrupts IVG7-15 */
- irq_flags = irq_flags | IMASK_IVG15 |
- IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
- IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
- return 0;
-}
-
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-void do_irq(int vec, struct pt_regs *fp)
-{
- if (vec == EVT_IVTMR_P) {
- vec = IRQ_CORETMR;
- } else {
- struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
- struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
- unsigned long sic_status0, sic_status1;
-
- SSYNC();
- sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0();
- sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1();
-
- for (;; ivg++) {
- if (ivg >= ivg_stop) {
- atomic_inc(&num_spurious);
- return;
- } else if ((sic_status0 & ivg->isrflag0) ||
- (sic_status1 & ivg->isrflag1))
- break;
- }
- vec = ivg->irqno;
- }
- asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
- kgdb_process_breakpoint();
-#endif
-}
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority.c
similarity index 83%
rename from arch/blackfin/mach-common/ints-priority-sc.c
rename to arch/blackfin/mach-common/ints-priority.c
index dec42ac..880595a 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1,5 +1,5 @@
/*
- * File: arch/blackfin/mach-common/ints-priority-sc.c
+ * File: arch/blackfin/mach-common/ints-priority.c
* Based on:
* Author:
*
@@ -13,7 +13,7 @@
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
* 2003 Metrowerks/Motorola
* 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -69,6 +69,10 @@
/* The number of spurious interrupts */
atomic_t num_spurious;
+#ifdef CONFIG_PM
+unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */
+#endif
+
struct ivgx {
/* irq number for request_irq, available in mach-bf533/irq.h */
unsigned int irqno;
@@ -98,8 +102,7 @@
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
int iar_shift = (irqn & 7) * 4;
- if (ivg ==
- (0xf &
+ if (ivg == (0xf &
#ifndef CONFIG_BF52x
bfin_read32((unsigned long *)SIC_IAR0 +
(irqn >> 3)) >> iar_shift)) {
@@ -179,6 +182,27 @@
SSYNC();
}
+#ifdef CONFIG_PM
+int bfin_internal_set_wake(unsigned int irq, unsigned int state)
+{
+ unsigned bank, bit;
+ unsigned long flags;
+ bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ bit = (irq - (IRQ_CORETMR + 1)) % 32;
+
+ local_irq_save(flags);
+
+ if (state)
+ bfin_sic_iwr[bank] |= (1 << bit);
+ else
+ bfin_sic_iwr[bank] &= ~(1 << bit);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+#endif
+
static struct irq_chip bfin_core_irqchip = {
.ack = ack_noop,
.mask = bfin_core_mask_irq,
@@ -189,6 +213,9 @@
.ack = ack_noop,
.mask = bfin_internal_mask_irq,
.unmask = bfin_internal_unmask_irq,
+#ifdef CONFIG_PM
+ .set_wake = bfin_internal_set_wake,
+#endif
};
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
@@ -206,8 +233,7 @@
if (!error_int_mask) {
local_irq_disable();
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
- ~(1 <<
- (IRQ_GENERIC_ERROR -
+ ~(1 << (IRQ_GENERIC_ERROR -
(IRQ_CORETMR + 1))));
SSYNC();
local_irq_enable();
@@ -232,7 +258,7 @@
};
static void bfin_demux_error_irq(unsigned int int_err_irq,
- struct irq_desc *intb_desc)
+ struct irq_desc *inta_desc)
{
int irq = 0;
@@ -404,16 +430,8 @@
return 0;
}
+ set_gpio_inen(gpionr, 0);
set_gpio_dir(gpionr, 0);
- set_gpio_inen(gpionr, 1);
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- set_gpio_edge(gpionr, 1);
- } else {
- set_gpio_edge(gpionr, 0);
- gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- }
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
@@ -426,6 +444,18 @@
else
set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ set_gpio_edge(gpionr, 1);
+ set_gpio_inen(gpionr, 1);
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_data(gpionr, 0);
+
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ set_gpio_inen(gpionr, 1);
+ }
+
SSYNC();
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
@@ -436,6 +466,20 @@
return 0;
}
+#ifdef CONFIG_PM
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+ unsigned gpio = irq_to_gpio(irq);
+
+ if (state)
+ gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
+ else
+ gpio_pm_wakeup_free(gpio);
+
+ return 0;
+}
+#endif
+
static struct irq_chip bfin_gpio_irqchip = {
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
@@ -443,30 +487,87 @@
.unmask = bfin_gpio_unmask_irq,
.set_type = bfin_gpio_irq_type,
.startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
+ .shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+ .set_wake = bfin_gpio_set_wake,
+#endif
};
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
- struct irq_desc *intb_desc)
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *desc)
{
- u16 i;
- struct irq_desc *desc;
+ unsigned int i, gpio, mask, irq, search = 0;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
- int irq = IRQ_PF0 + i;
- int flag_d = get_gpiop_data(i);
- int mask =
- flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
-
- while (mask) {
- if (mask & 1) {
- desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- }
- irq++;
- mask >>= 1;
- }
+ switch (inta_irq) {
+#if defined(CONFIG_BF53x)
+ case IRQ_PROG_INTA:
+ irq = IRQ_PF0;
+ search = 1;
+ break;
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ case IRQ_MAC_RX:
+ irq = IRQ_PH0;
+ break;
+# endif
+#elif defined(CONFIG_BF52x)
+ case IRQ_PORTF_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PORTG_INTA:
+ irq = IRQ_PG0;
+ break;
+ case IRQ_PORTH_INTA:
+ irq = IRQ_PH0;
+ break;
+#elif defined(CONFIG_BF561)
+ case IRQ_PROG0_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PROG1_INTA:
+ irq = IRQ_PF16;
+ break;
+ case IRQ_PROG2_INTA:
+ irq = IRQ_PF32;
+ break;
+#endif
+ default:
+ BUG();
+ return;
}
+
+ if (search) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+ irq += i;
+
+ mask = get_gpiop_data(i) &
+ (gpio_enabled[gpio_bank(i)] &
+ get_gpiop_maska(i));
+
+ while (mask) {
+ if (mask & 1) {
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ }
+ }
+ } else {
+ gpio = irq_to_gpio(irq);
+ mask = get_gpiop_data(gpio) &
+ (gpio_enabled[gpio_bank(gpio)] &
+ get_gpiop_maska(gpio));
+
+ do {
+ if (mask & 1) {
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ } while (mask);
+ }
+
}
#else /* CONFIG_BF54x */
@@ -711,6 +812,74 @@
return 0;
}
+#ifdef CONFIG_PM
+u32 pint_saved_masks[NR_PINT_SYS_IRQS];
+u32 pint_wakeup_masks[NR_PINT_SYS_IRQS];
+
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+ u32 pint_irq;
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 bank = PINT_2_BANK(pint_val);
+ u32 pintbit = PINT_BIT(pint_val);
+
+ switch (bank) {
+ case 0:
+ pint_irq = IRQ_PINT0;
+ break;
+ case 2:
+ pint_irq = IRQ_PINT2;
+ break;
+ case 3:
+ pint_irq = IRQ_PINT3;
+ break;
+ case 1:
+ pint_irq = IRQ_PINT1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ bfin_internal_set_wake(pint_irq, state);
+
+ if (state)
+ pint_wakeup_masks[bank] |= pintbit;
+ else
+ pint_wakeup_masks[bank] &= ~pintbit;
+
+ return 0;
+}
+
+u32 bfin_pm_setup(void)
+{
+ u32 val, i;
+
+ for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+ val = pint[i]->mask_clear;
+ pint_saved_masks[i] = val;
+ if (val ^ pint_wakeup_masks[i]) {
+ pint[i]->mask_clear = val;
+ pint[i]->mask_set = pint_wakeup_masks[i];
+ }
+ }
+
+ return 0;
+}
+
+void bfin_pm_restore(void)
+{
+ u32 i, val;
+
+ for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+ val = pint_saved_masks[i];
+ if (val ^ pint_wakeup_masks[i]) {
+ pint[i]->mask_clear = pint[i]->mask_clear;
+ pint[i]->mask_set = val;
+ }
+ }
+}
+#endif
+
static struct irq_chip bfin_gpio_irqchip = {
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
@@ -718,17 +887,19 @@
.unmask = bfin_gpio_unmask_irq,
.set_type = bfin_gpio_irq_type,
.startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
+ .shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+ .set_wake = bfin_gpio_set_wake,
+#endif
};
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
- struct irq_desc *intb_desc)
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *desc)
{
u8 bank, pint_val;
u32 request, irq;
- struct irq_desc *desc;
- switch (intb_irq) {
+ switch (inta_irq) {
case IRQ_PINT0:
bank = 0;
break;
@@ -795,7 +966,7 @@
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
@@ -812,6 +983,8 @@
local_irq_disable();
+ init_exception_buff();
+
#ifdef CONFIG_BF54x
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -874,6 +1047,19 @@
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
+#elif defined(CONFIG_BF561)
+ case IRQ_PROG0_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PROG1_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PROG2_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
#endif
default:
set_irq_handler(irq, handle_simple_irq);
@@ -893,11 +1079,8 @@
}
#endif
-#ifndef CONFIG_BF54x
- for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
-#else
- for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
-#endif
+ for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+
set_irq_chip(irq, &bfin_gpio_irqchip);
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
@@ -936,7 +1119,7 @@
} else {
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
unsigned long sic_status[3];
SSYNC();
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 81930f7..0be805c 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -4,7 +4,7 @@
* Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
*
* Created: 2001
- * Description: Power management for the bfin
+ * Description: Blackfin power management
*
* Modified: Nicolas Pitre - PXA250 support
* Copyright (c) 2002 Monta Vista Software, Inc.
@@ -12,7 +12,7 @@
* Copyright (c) 2002 Monta Vista Software, Inc.
* Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
* Copyright 2004
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -67,42 +67,30 @@
gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
#endif
-#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API)
- {
- u32 flags;
+ u32 flags;
- local_irq_save(flags);
+ local_irq_save(flags);
+ bfin_pm_setup();
- sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/
-
- gpio_pm_restore();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
+#ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+ sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
#endif
- local_irq_restore(flags);
- }
-#endif
+ bfin_pm_restore();
-#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
- sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
-# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
+# ifdef CONFIG_BF54x
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
-# else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
# endif
-#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
+#else
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
+ local_irq_restore(flags);
}
/*
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index eb1a12a..1f516c5 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -138,8 +138,7 @@
start_mem = PAGE_ALIGN(start_mem);
max_mapnr = num_physpages = MAP_NR(high_memory);
- printk(KERN_INFO "Kernel managed physical pages: %lu\n",
- num_physpages);
+ printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", num_physpages);
/* This will put all memory onto the freelists. */
totalram_pages = free_all_bootmem();
@@ -153,8 +152,7 @@
/* do not count in kernel image between _rambase and _ramstart */
reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
- reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >>
- PAGE_SHIFT;
+ reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
#endif
codek = (_etext - _stext) >> 10;
@@ -163,11 +161,9 @@
printk(KERN_INFO
"Memory available: %luk/%luk RAM, "
- "(%uk init code, %uk kernel code, "
- "%uk data, %uk dma, %uk reserved)\n",
+ "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
- initk, codek, datak, DMA_UNCACHED_REGION >> 10,
- (reservedpages << (PAGE_SHIFT-10)));
+ initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
/* Initialize the blackfin L1 Memory. */
l1sram_init();
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 6ae0619..5dba3a7 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -70,6 +70,7 @@
extern void evt14_softirq(void);
extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
+extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
extern char fixed_code_start;
@@ -121,6 +122,7 @@
extern unsigned long table_start, table_end;
+extern unsigned long bfin_sic_iwr[];
extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
extern struct file_operations dpmc_fops;
extern char _start;
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
index 1a0b57f..9fa1915 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -1,6 +1,6 @@
/************************************************************
-*
-* Copyright (C) 2004, Analog Devices. All Rights Reserved
+
+* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved
*
* FILE bfin5xx_spi.h
* PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
@@ -32,42 +32,6 @@
#define SPI_BAUD_OFF 0x14
#define SPI_SHAW_OFF 0x18
-#define CMD_SPI_OUT_ENABLE 1
-#define CMD_SPI_SET_BAUDRATE 2
-#define CMD_SPI_SET_POLAR 3
-#define CMD_SPI_SET_PHASE 4
-#define CMD_SPI_SET_MASTER 5
-#define CMD_SPI_SET_SENDOPT 6
-#define CMD_SPI_SET_RECVOPT 7
-#define CMD_SPI_SET_ORDER 8
-#define CMD_SPI_SET_LENGTH16 9
-#define CMD_SPI_GET_STAT 11
-#define CMD_SPI_GET_CFG 12
-#define CMD_SPI_SET_CSAVAIL 13
-#define CMD_SPI_SET_CSHIGH 14 /* CS unavail */
-#define CMD_SPI_SET_CSLOW 15 /* CS avail */
-#define CMD_SPI_MISO_ENABLE 16
-#define CMD_SPI_SET_CSENABLE 17
-#define CMD_SPI_SET_CSDISABLE 18
-
-#define CMD_SPI_SET_TRIGGER_MODE 19
-#define CMD_SPI_SET_TRIGGER_SENSE 20
-#define CMD_SPI_SET_TRIGGER_EDGE 21
-#define CMD_SPI_SET_TRIGGER_LEVEL 22
-
-#define CMD_SPI_SET_TIME_SPS 23
-#define CMD_SPI_SET_TIME_SAMPLES 24
-#define CMD_SPI_GET_SYSTEMCLOCK 25
-
-#define CMD_SPI_SET_WRITECONTINUOUS 26
-#define CMD_SPI_SET_SKFS 27
-
-#define CMD_SPI_GET_ALLCONFIG 32 /* For debug */
-
-#define SPI_DEFAULT_BARD 0x0100
-
-#define SPI0_IRQ_NUM IRQ_SPI
-#define SPI_ERR_TRIG -1
#define BIT_CTL_ENABLE 0x4000
#define BIT_CTL_OPENDRAIN 0x2000
@@ -148,6 +112,10 @@
#define CFG_SPI_CS6VALUE 6
#define CFG_SPI_CS7VALUE 7
+#define CMD_SPI_SET_BAUDRATE 2
+#define CMD_SPI_GET_SYSTEMCLOCK 25
+#define CMD_SPI_SET_WRITECONTINUOUS 26
+
/* device.platform_data for SSP controller devices */
struct bfin5xx_spi_master {
u16 num_chipselect;
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index f162edb..686cf83 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -53,10 +53,10 @@
void change_baud(int baud);
void fullon_mode(void);
void active_mode(void);
-void sleep_mode(u32 sic_iwr);
-void deep_sleep(u32 sic_iwr);
-void hibernate_mode(u32 sic_iwr);
-void sleep_deeper(u32 sic_iwr);
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void program_wdog_timer(unsigned long);
void unmask_wdog_wakeup_evt(void);
void clear_wdog_wakeup_evt(void);
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index d0426c1..27ff532 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -376,16 +376,19 @@
#endif
#ifdef CONFIG_PM
+unsigned int bfin_pm_setup(void);
+void bfin_pm_restore(void);
+
+#ifndef CONFIG_BF54x
#define PM_WAKE_RISING 0x1
#define PM_WAKE_FALLING 0x2
#define PM_WAKE_HIGH 0x4
#define PM_WAKE_LOW 0x8
#define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING)
+#define PM_WAKE_IGNORE 0xF0
int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
void gpio_pm_wakeup_free(unsigned gpio);
-unsigned int gpio_pm_setup(void);
-void gpio_pm_restore(void);
struct gpio_port_s {
unsigned short data;
@@ -409,6 +412,7 @@
unsigned short fer;
unsigned short reserved;
};
+#endif /*CONFIG_BF54x*/
#endif /*CONFIG_PM*/
/***********************************************************
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 19e84dd..3bd67da 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -46,6 +46,10 @@
#include "defBF544.h"
#endif
+#ifdef CONFIG_BF547
+#include "defBF547.h"
+#endif
+
#ifdef CONFIG_BF548
#include "defBF548.h"
#endif
@@ -58,10 +62,12 @@
#ifdef CONFIG_BF542
#include "cdefBF542.h"
#endif
-
#ifdef CONFIG_BF544
#include "cdefBF544.h"
#endif
+#ifdef CONFIG_BF547
+#include "cdefBF547.h"
+#endif
#ifdef CONFIG_BF548
#include "cdefBF548.h"
#endif
diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/include/asm-blackfin/mach-bf548/cdefBF547.h
new file mode 100644
index 0000000..d0a200b
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/cdefBF547.h
@@ -0,0 +1,865 @@
+/*
+ * File: include/asm-blackfin/mach-bf548/cdefBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF548_H
+#define _CDEF_BF548_H
+
+/* include all Core registers and bit definitions */
+#include "defBF548.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV)
+#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val)
+#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL)
+#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val)
+#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL)
+#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val)
+#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT)
+#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val)
+#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR)
+#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val)
+#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL)
+#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val)
+#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT)
+#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val)
+#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR)
+#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val)
+#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT)
+#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val)
+#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK)
+#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val)
+#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL)
+#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val)
+#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT)
+#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val)
+#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8)
+#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val)
+#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16)
+#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val)
+#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8)
+#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val)
+#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16)
+#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val)
+
+/* SPI2 Registers */
+
+#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER() bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF548_H */
diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/include/asm-blackfin/mach-bf548/defBF547.h
new file mode 100644
index 0000000..3a3a18e
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/defBF547.h
@@ -0,0 +1,1244 @@
+/*
+ * File: include/asm-blackfin/mach-bf548/defBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF548_H
+#define _DEF_BF548_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
+#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
+#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
+#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
+#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
+#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
+#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
+#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
+#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
+#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
+#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
+#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
+#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
+#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
+#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
+#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
+#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
+#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
+#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
+#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
+#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
+#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
+#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
+#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
+#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
+#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
+#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
+#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
+#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
+#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
+#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
+#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
+#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
+#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
+#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
+#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
+#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
+#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
+#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
+#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
+#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
+#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
+#define UART2_GCTL 0xffc02108 /* Global Control Register */
+#define UART2_LCR 0xffc0210c /* Line Control Register */
+#define UART2_MCR 0xffc02110 /* Modem Control Register */
+#define UART2_LSR 0xffc02114 /* Line Status Register */
+#define UART2_MSR 0xffc02118 /* Modem Status Register */
+#define UART2_SCR 0xffc0211c /* Scratch Register */
+#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
+#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
+#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define TWI1_REGBASE 0xffc02200
+#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
+#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
+#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
+#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
+#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
+#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
+#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
+#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
+#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
+#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
+#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
+#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
+#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
+#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
+#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
+#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2 Registers */
+
+#define SPI2_REGBASE 0xffc02400
+#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
+#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
+#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
+#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
+#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
+#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
+#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
+
+/* ATAPI Registers */
+
+#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
+#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
+#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
+#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
+#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
+#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
+#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
+#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
+#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
+#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
+#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
+#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
+#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
+#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
+#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
+#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
+#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
+#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
+#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
+#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
+#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
+#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
+#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
+#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
+#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
+#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
+#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
+#define SDH_COMMAND 0xffc0390c /* SDH Command */
+#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
+#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
+#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
+#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
+#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
+#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
+#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
+#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
+#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
+#define SDH_STATUS 0xffc03934 /* SDH Status */
+#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
+#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
+#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
+#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
+#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
+#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
+#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
+#define SDH_CFG 0xffc039c8 /* SDH Configuration */
+#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
+#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
+#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
+#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
+#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
+#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
+#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
+#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
+#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
+#define HOST_STATUS 0xffc03a04 /* HOST Status Register */
+#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define USB_FADDR 0xffc03c00 /* Function address register */
+#define USB_POWER 0xffc03c04 /* Power management register */
+#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
+#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
+#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
+#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
+#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
+#define USB_FRAME 0xffc03c20 /* USB frame number */
+#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
+#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
+#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
+#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
+#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
+#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
+#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
+#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
+#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
+#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
+#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
+#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
+#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
+#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
+#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
+#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
+#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
+#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
+#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
+#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
+#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
+#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
+#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
+#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
+#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
+#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
+#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
+#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
+#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
+#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
+#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
+#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
+#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
+#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
+#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
+#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
+#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
+#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
+#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
+#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
+#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
+#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
+#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
+#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
+#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
+#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
+#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
+#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
+#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
+#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
+#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
+#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
+#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
+#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
+#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
+#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
+#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
+#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
+#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
+#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
+#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
+#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
+#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
+#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
+#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
+#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
+#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
+#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
+#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
+#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
+#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
+#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
+#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
+#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
+#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
+#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
+#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
+#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
+#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
+#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
+#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
+#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
+#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
+#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
+#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
+#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
+#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
+#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
+#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
+#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
+#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
+#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
+#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
+#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
+#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
+#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
+#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
+#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
+#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
+#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
+#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
+#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
+#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
+/* and MULTI BIT READ MACROS */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define PIXC_EN 0x1 /* Pixel Compositor Enable */
+#define OVR_A_EN 0x2 /* Overlay A Enable */
+#define OVR_B_EN 0x4 /* Overlay B Enable */
+#define IMG_FORM 0x8 /* Image Data Format */
+#define OVR_FORM 0x10 /* Overlay Data Format */
+#define OUT_FORM 0x20 /* Output Data Format */
+#define UDS_MOD 0x40 /* Resampling Mode */
+#define TC_EN 0x80 /* Transparent Color Enable */
+#define IMG_STAT 0x300 /* Image FIFO Status */
+#define OVR_STAT 0xc00 /* Overlay FIFO Status */
+#define WM_LVL 0x3000 /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define A_HSTART 0xfff /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define A_HEND 0xfff /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define A_VSTART 0x3ff /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define A_VEND 0x3ff /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define A_TRANSP 0xf /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define B_HSTART 0xfff /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define B_HEND 0xfff /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define B_VSTART 0x3ff /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define B_VEND 0x3ff /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define B_TRANSP 0xf /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
+#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
+#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
+#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define A11 0x3ff /* A11 in the Coefficient Matrix */
+#define A12 0xffc00 /* A12 in the Coefficient Matrix */
+#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
+#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define A21 0x3ff /* A21 in the Coefficient Matrix */
+#define A22 0xffc00 /* A22 in the Coefficient Matrix */
+#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
+#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define A31 0x3ff /* A31 in the Coefficient Matrix */
+#define A32 0xffc00 /* A32 in the Coefficient Matrix */
+#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
+#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define A14 0x3ff /* A14 in the Bias Vector */
+#define A24 0xffc00 /* A24 in the Bias Vector */
+#define A34 0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
+#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
+#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define HOST_EN 0x1 /* Host Enable */
+#define HOST_END 0x2 /* Host Endianess */
+#define DATA_SIZE 0x4 /* Data Size */
+#define HOST_RST 0x8 /* Host Reset */
+#define HRDY_OVR 0x20 /* Host Ready Override */
+#define INT_MODE 0x40 /* Interrupt Mode */
+#define BT_EN 0x80 /* Bus Timeout Enable */
+#define EHW 0x100 /* Enable Host Write */
+#define EHR 0x200 /* Enable Host Read */
+#define BDR 0x400 /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define DMA_READY 0x1 /* DMA Ready */
+#define FIFOFULL 0x2 /* FIFO Full */
+#define FIFOEMPTY 0x4 /* FIFO Empty */
+#define DMA_COMPLETE 0x8 /* DMA Complete */
+#define HSHK 0x10 /* Host Handshake */
+#define HSTIMEOUT 0x20 /* Host Timeout */
+#define HIRQ 0x40 /* Host Interrupt Request */
+#define ALLOW_CNFG 0x80 /* Allow New Configuration */
+#define DMA_DIR 0x100 /* DMA Direction */
+#define BTE 0x200 /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
+
+/* Bit masks for KPAD_CTL */
+
+#define KPAD_EN 0x1 /* Keypad Enable */
+#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
+#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
+#define KPAD_COLEN 0xe000 /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define DBON_SCALE 0xff /* Debounce Scale Value */
+#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define KPAD_ROW 0xff /* Rows Pressed */
+#define KPAD_COL 0xff00 /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
+#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
+#define KPAD_PRESSED 0x8 /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define CMD_IDX 0x3f /* Command Index */
+#define CMD_RSP 0x40 /* Response */
+#define CMD_L_RSP 0x80 /* Long Response */
+#define CMD_INT_E 0x100 /* Command Interrupt */
+#define CMD_PEND_E 0x200 /* Command Pending */
+#define CMD_E 0x400 /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define PWR_ON 0x3 /* Power On */
+#if 0
+#define TBD 0x3c /* TBD */
+#endif
+#define SD_CMD_OD 0x40 /* Open Drain Output */
+#define ROD_CTL 0x80 /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define CLKDIV 0xff /* MC_CLK Divisor */
+#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E 0x200 /* Power Save Enable */
+#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
+#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define RESP_CMD 0x3f /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define DTX_E 0x1 /* Data Transfer Enable */
+#define DTX_DIR 0x2 /* Data Transfer Direction */
+#define DTX_MODE 0x4 /* Data Transfer Mode */
+#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
+#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
+#define CMD_TIME_OUT 0x4 /* CMD Time Out */
+#define DAT_TIME_OUT 0x8 /* Data Time Out */
+#define TX_UNDERRUN 0x10 /* Transmit Underrun */
+#define RX_OVERRUN 0x20 /* Receive Overrun */
+#define CMD_RESP_END 0x40 /* CMD Response End */
+#define CMD_SENT 0x80 /* CMD Sent */
+#define DAT_END 0x100 /* Data End */
+#define START_BIT_ERR 0x200 /* Start Bit Error */
+#define DAT_BLK_END 0x400 /* Data Block End */
+#define CMD_ACT 0x800 /* CMD Active */
+#define TX_ACT 0x1000 /* Transmit Active */
+#define RX_ACT 0x2000 /* Receive Active */
+#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
+#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
+#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
+#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
+#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
+#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
+#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
+#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
+#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
+#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
+#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
+#define DAT_END_STAT 0x100 /* Data End Status */
+#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
+#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
+#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
+#define DAT_END_MASK 0x100 /* Data End Mask */
+#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
+#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
+#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
+#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define FIFO_COUNT 0x7fff /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
+#define SD_CARD_DET 0x10 /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
+#define SCD_MSK 0x40 /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define CLKS_EN 0x1 /* Clocks Enable */
+#define SD4E 0x4 /* SDIO 4-Bit Enable */
+#define MWE 0x8 /* Moving Window Enable */
+#define SD_RST 0x10 /* SDMMC Reset */
+#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
+#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
+#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define RWR 0x1 /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define PIO_START 0x1 /* Start PIO/Reg Op */
+#define MULTI_START 0x2 /* Start Multi-DMA Op */
+#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
+#define XFER_DIR 0x8 /* Transfer Direction */
+#define IORDY_EN 0x10 /* IORDY Enable */
+#define FIFO_FLUSH 0x20 /* Flush FIFOs */
+#define SOFT_RST 0x40 /* Soft Reset */
+#define DEV_RST 0x80 /* Device Reset */
+#define TFRCNT_RST 0x100 /* Trans Count Reset */
+#define END_ON_TERM 0x200 /* End/Terminate Select */
+#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
+#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
+#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
+#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
+#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define DEV_ADDR 0x1f /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
+#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
+#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
+#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
+#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
+#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
+#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
+#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
+#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
+#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
+#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
+#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
+#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
+#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
+#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
+#define ATAPI_DASP 0x2 /* Device dasp to host line status */
+#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
+#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
+#define ATAPI_ADDR 0x70 /* ATAPI address line status */
+#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
+#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
+#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
+#define ATAPI_DIORN 0x400 /* ATAPI read line status */
+#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define PIO_CSTATE 0xf /* PIO mode state machine current state */
+#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
+#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
+#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define T2_REG 0xff /* End of cycle time for register access transfers */
+#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
+#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
+#define T4_REG 0xf000 /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
+#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define TKW 0xff /* Selects DIOW negated pulsewidth */
+#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define TH 0xff /* Selects DIOW data hold */
+#define TEOC 0xff00 /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define TACK 0xff /* Selects setup and hold times for TACK */
+#define TENV 0xff00 /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define TDVS 0xff /* Selects data valid setup time */
+#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define TMLI 0xff00 /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define TZAH 0xff /* Selects minimum delay required for output */
+#define READY_PAUSE 0xff00 /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define TIMEN8 0x1 /* Timer 8 Enable */
+#define TIMEN9 0x2 /* Timer 9 Enable */
+#define TIMEN10 0x4 /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define TIMDIS8 0x1 /* Timer 8 Disable */
+#define TIMDIS9 0x2 /* Timer 9 Disable */
+#define TIMDIS10 0x4 /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define TIMIL8 0x1 /* Timer 8 Interrupt */
+#define TIMIL9 0x2 /* Timer 9 Interrupt */
+#define TIMIL10 0x4 /* Timer 10 Interrupt */
+#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
+#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
+#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
+#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
+#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
+#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define FUNCTION_ADDRESS 0x7f /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
+#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
+#define RESUME_MODE 0x4 /* DMA Mode */
+#define RESET 0x8 /* Reset indicator */
+#define HS_MODE 0x10 /* High Speed mode indicator */
+#define HS_ENABLE 0x20 /* high Speed Enable */
+#define SOFT_CONN 0x40 /* Soft connect */
+#define ISO_UPDATE 0x80 /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
+#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
+#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
+#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
+#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
+#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
+#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
+#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
+#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
+#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
+#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
+#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
+#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
+#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
+#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
+#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
+#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
+#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
+#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
+#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
+#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
+#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
+#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
+#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
+#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
+#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
+#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define SUSPEND_B 0x1 /* Suspend indicator */
+#define RESUME_B 0x2 /* Resume indicator */
+#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
+#define SOF_B 0x8 /* Start of frame */
+#define CONN_B 0x10 /* Connection indicator */
+#define DISCON_B 0x20 /* Disconnect indicator */
+#define SESSION_REQ_B 0x40 /* Session Request */
+#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
+#define RESUME_BE 0x2 /* Resume indicator int enable */
+#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
+#define SOF_BE 0x8 /* Start of frame int enable */
+#define CONN_BE 0x10 /* Connection indicator int enable */
+#define DISCON_BE 0x20 /* Disconnect indicator int enable */
+#define SESSION_REQ_BE 0x40 /* Session Request int enable */
+#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define FRAME_NUMBER 0x7ff /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define SELECTED_ENDPOINT 0xf /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define GLOBAL_ENA 0x1 /* enables USB module */
+#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
+#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
+#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
+#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
+#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
+#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
+#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
+#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
+#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
+#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
+#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
+#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
+#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
+#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define SESSION 0x1 /* session indicator */
+#define HOST_REQ 0x2 /* Host negotiation request */
+#define HOST_MODE 0x4 /* indicates USBDRC is a host */
+#define VBUS0 0x8 /* Vbus level indicator[0] */
+#define VBUS1 0x10 /* Vbus level indicator[1] */
+#define LSDEV 0x20 /* Low-speed indicator */
+#define FSDEV 0x40 /* Full or High-speed indicator */
+#define B_DEVICE 0x80 /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
+#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
+#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
+#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
+#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
+#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
+#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
+#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
+#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
+#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
+#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define RXPKTRDY 0x1 /* data packet receive indicator */
+#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
+#define STALL_SENT 0x4 /* STALL handshake sent */
+#define DATAEND 0x8 /* Data end indicator */
+#define SETUPEND 0x10 /* Setup end */
+#define SENDSTALL 0x20 /* Send STALL handshake */
+#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
+#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
+#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
+#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
+#define SETUPPKT_H 0x8 /* send Setup token host mode */
+#define ERROR_H 0x10 /* timeout error indicator host mode */
+#define REQPKT_H 0x20 /* Request an IN transaction host mode */
+#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
+#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
+#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
+#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
+#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
+#define STALL_SEND_T 0x10 /* issue a Stall handshake */
+#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
+#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
+#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
+#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
+#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
+#define ISO_T 0x4000 /* enable Isochronous transfers */
+#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
+#define ERROR_TH 0x4 /* error condition host mode */
+#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
+#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
+#define FIFO_FULL_R 0x2 /* FIFO not empty */
+#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
+#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
+#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
+#define STALL_SEND_R 0x20 /* issue a Stall handshake */
+#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
+#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
+#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
+#define DISNYET_R 0x1000 /* disable Nyet handshakes */
+#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
+#define ISO_R 0x4000 /* enable Isochronous transfers */
+#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
+#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
+#define REQPKT_RH 0x20 /* request an IN transaction host mode */
+#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
+#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
+#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
+#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define TARGET_EP_NO_T 0xf /* EP number */
+#define PROTOCOL_T 0xc /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define TARGET_EP_NO_R 0xf /* EP number */
+#define PROTOCOL_R 0xc /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define DMA0_INT 0x1 /* DMA0 pending interrupt */
+#define DMA1_INT 0x2 /* DMA1 pending interrupt */
+#define DMA2_INT 0x4 /* DMA2 pending interrupt */
+#define DMA3_INT 0x8 /* DMA3 pending interrupt */
+#define DMA4_INT 0x10 /* DMA4 pending interrupt */
+#define DMA5_INT 0x20 /* DMA5 pending interrupt */
+#define DMA6_INT 0x40 /* DMA6 pending interrupt */
+#define DMA7_INT 0x80 /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define DMA_ENA 0x1 /* DMA enable */
+#define DIRECTION 0x2 /* direction of DMA transfer */
+#define MODE 0x4 /* DMA Bus error */
+#define INT_ENA 0x8 /* Interrupt enable */
+#define EPNUM 0xf0 /* EP number */
+#define BUSERROR 0x100 /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define HMDMAEN 0x1 /* Handshake MDMA Enable */
+#define REP 0x2 /* Handshake MDMA Request Polarity */
+#define UTE 0x8 /* Urgency Threshold Enable */
+#define OIE 0x10 /* Overflow Interrupt Enable */
+#define BDIE 0x20 /* Block Done Interrupt Enable */
+#define MBDI 0x40 /* Mask Block Done Interrupt */
+#define DRQ 0x300 /* Handshake MDMA Request Type */
+#define RBC 0x1000 /* Force Reload of BCOUNT */
+#define PS 0x2000 /* Pin Status */
+#define OI 0x4000 /* Overflow Interrupt Generated */
+#define BDI 0x8000 /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/* MULTI BIT MACRO ENUMERATIONS */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF548_H */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index e46f568..1d7c96e 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -1010,9 +1010,9 @@
#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define COMPLETE 0x8 /* DMA Complete */
+#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
-#define TIMEOUT 0x20 /* Host Timeout */
+#define HSTIMEOUT 0x20 /* Host Timeout */
#define HIRQ 0x40 /* Host Interrupt Request */
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define DMA_DIR 0x100 /* DMA Direction */
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index 4d97d3a..46ff31f 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -51,9 +51,13 @@
#define CH_PIXC_OVERLAY 16
#define CH_PIXC_OUTPUT 17
#define CH_SPORT2_RX 18
+#define CH_UART2_RX 18
#define CH_SPORT2_TX 19
+#define CH_UART2_TX 19
#define CH_SPORT3_RX 20
+#define CH_UART3_RX 20
#define CH_SPORT3_TX 21
+#define CH_UART3_TX 21
#define CH_SDH 22
#define CH_NFC 22
#define CH_SPI2 23
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index c34507a..ad380d1 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -99,9 +99,13 @@
#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */
#define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */
#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */
#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */
#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */
#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */
#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */
#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */
#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */
@@ -421,9 +425,13 @@
/* IAR4 BIT FILEDS */
#define IRQ_CAN0_ERR_POS 0
#define IRQ_SPORT2_RX_POS 4
+#define IRQ_UART2_RX_POS 4
#define IRQ_SPORT2_TX_POS 8
+#define IRQ_UART2_TX_POS 8
#define IRQ_SPORT3_RX_POS 12
+#define IRQ_UART3_RX_POS 12
#define IRQ_SPORT3_TX_POS 16
+#define IRQ_UART3_TX_POS 16
#define IRQ_EPPI1_POS 20
#define IRQ_EPPI2_POS 24
#define IRQ_SPI1_POS 28
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 562aee3..362617f 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -49,4 +49,24 @@
#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
+
+#define SIC_IAR0 SICA_IAR0
+#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
+#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
+#define bfin_write_SIC_IWR0 bfin_write_SICA_IWR0
+#define bfin_write_SIC_IWR1 bfin_write_SICA_IWR1
+
+#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0
+#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1
+#define bfin_read_SIC_IWR0 bfin_read_SICA_IWR0
+#define bfin_read_SIC_IWR1 bfin_read_SICA_IWR1
+#define bfin_read_SIC_ISR0 bfin_read_SICA_ISR0
+#define bfin_read_SIC_ISR1 bfin_read_SICA_ISR1
+
+#define bfin_read_SIC_IMASK(x) bfin_read32(SICA_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val) bfin_write32((SICA_IMASK0 + (x << 2)), val)
+#define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val)
+
+
#endif /* _MACH_BLACKFIN_H_ */
diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h
index e31fe85..d50d063 100644
--- a/include/asm-blackfin/termios.h
+++ b/include/asm-blackfin/termios.h
@@ -39,24 +39,6 @@
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-/* line disciplines */
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14 /* synchronous PPP */
-#define N_HCI 15 /* Bluetooth HCI UART */
-
#ifdef __KERNEL__
/* intr=^C quit=^\ erase=del kill=^U
diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h
index 6313aac..ef18afb 100644
--- a/include/asm-blackfin/trace.h
+++ b/include/asm-blackfin/trace.h
@@ -46,42 +46,47 @@
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
-#define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg)
-
#define trace_buffer_stop(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
dreg = 0x1; \
[preg] = dreg;
-#define trace_buffer_start(preg, dreg) \
- preg.L = LO(TBUFCTL); \
- preg.H = HI(TBUFCTL); \
- dreg = BFIN_TRACE_ON; \
- [preg] = dreg;
-
#define trace_buffer_init(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
dreg = BFIN_TRACE_INIT; \
[preg] = dreg;
+#define trace_buffer_save(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = [preg]; \
+ [sp++] = dreg; \
+ dreg = 0x1; \
+ [preg] = dreg;
+
+#define trace_buffer_restore(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = [sp--]; \
+ [preg] = dreg;
+
#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
#define trace_buffer_stop(preg, dreg)
-#define trace_buffer_start(preg, dreg)
#define trace_buffer_init(preg, dreg)
+#define trace_buffer_save(preg, dreg)
+#define trace_buffer_restore(preg, dreg)
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
-# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
-# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
-
+# define DEBUG_HWTRACE_SAVE(preg, dreg) trace_buffer_save(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg) trace_buffer_restore(preg, dreg)
#else
-# define DEBUG_START_HWTRACE(preg, dreg)
-# define DEBUG_STOP_HWTRACE(preg, dreg)
+# define DEBUG_HWTRACE_SAVE(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg)
#endif
#endif /* __ASSEMBLY__ */