| # |
| # Wireless LAN device configuration |
| # |
| |
| menu "Wireless LAN" |
| depends on !S390 |
| |
| config WLAN_PRE80211 |
| bool "Wireless LAN (pre-802.11)" |
| depends on NETDEVICES |
| ---help--- |
| Say Y if you have any pre-802.11 wireless LAN hardware. |
| |
| This option does not affect the kernel build, it only |
| lets you choose drivers. |
| |
| config STRIP |
| tristate "STRIP (Metricom starmode radio IP)" |
| depends on INET && WLAN_PRE80211 |
| select WIRELESS_EXT |
| ---help--- |
| Say Y if you have a Metricom radio and intend to use Starmode Radio |
| IP. STRIP is a radio protocol developed for the MosquitoNet project |
| (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet |
| traffic using Metricom radios. Metricom radios are small, battery |
| powered, 100kbit/sec packet radio transceivers, about the size and |
| weight of a cellular telephone. (You may also have heard them called |
| "Metricom modems" but we avoid the term "modem" because it misleads |
| many people into thinking that you can plug a Metricom modem into a |
| phone line and use it as a modem.) |
| |
| You can use STRIP on any Linux machine with a serial port, although |
| it is obviously most useful for people with laptop computers. If you |
| think you might get a Metricom radio in the future, there is no harm |
| in saying Y to STRIP now, except that it makes the kernel a bit |
| bigger. |
| |
| To compile this as a module, choose M here: the module will be |
| called strip. |
| |
| config ARLAN |
| tristate "Aironet Arlan 655 & IC2200 DS support" |
| depends on ISA && !64BIT && WLAN_PRE80211 |
| select WIRELESS_EXT |
| ---help--- |
| Aironet makes Arlan, a class of wireless LAN adapters. These use the |
| www.Telxon.com chip, which is also used on several similar cards. |
| This driver is tested on the 655 and IC2200 series cards. Look at |
| <http://www.ylenurme.ee/~elmer/655/> for the latest information. |
| |
| The driver is built as two modules, arlan and arlan-proc. The latter |
| is the /proc interface and is not needed most of time. |
| |
| On some computers the card ends up in non-valid state after some |
| time. Use a ping-reset script to clear it. |
| |
| config WAVELAN |
| tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" |
| depends on ISA && WLAN_PRE80211 |
| select WIRELESS_EXT |
| ---help--- |
| The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is |
| a Radio LAN (wireless Ethernet-like Local Area Network) using the |
| radio frequencies 900 MHz and 2.4 GHz. |
| |
| If you want to use an ISA WaveLAN card under Linux, say Y and read |
| the Ethernet-HOWTO, available from |
| <http://www.tldp.org/docs.html#howto>. Some more specific |
| information is contained in |
| <file:Documentation/networking/wavelan.txt> and in the source code |
| <file:drivers/net/wireless/wavelan.p.h>. |
| |
| You will also need the wireless tools package available from |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. |
| Please read the man pages contained therein. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called wavelan. |
| |
| config PCMCIA_WAVELAN |
| tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" |
| depends on PCMCIA && WLAN_PRE80211 |
| select WIRELESS_EXT |
| help |
| Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. This |
| driver is for the non-IEEE-802.11 Wavelan cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called wavelan_cs. If unsure, say N. |
| |
| config PCMCIA_NETWAVE |
| tristate "Xircom Netwave AirSurfer Pcmcia wireless support" |
| depends on PCMCIA && WLAN_PRE80211 |
| select WIRELESS_EXT |
| help |
| Say Y here if you intend to attach this type of PCMCIA (PC-card) |
| wireless Ethernet networking card to your computer. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called netwave_cs. If unsure, say N. |
| |
| |
| config WLAN_80211 |
| bool "Wireless LAN (IEEE 802.11)" |
| depends on NETDEVICES |
| ---help--- |
| Say Y if you have any 802.11 wireless LAN hardware. |
| |
| This option does not affect the kernel build, it only |
| lets you choose drivers. |
| |
| config PCMCIA_RAYCS |
| tristate "Aviator/Raytheon 2.4MHz wireless support" |
| depends on PCMCIA && WLAN_80211 |
| select WIRELESS_EXT |
| ---help--- |
| Say Y here if you intend to attach an Aviator/Raytheon PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. |
| Please read the file <file:Documentation/networking/ray_cs.txt> for |
| details. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ray_cs. If unsure, say N. |
| |
| config LIBERTAS |
| tristate "Marvell 8xxx Libertas WLAN driver support" |
| depends on WLAN_80211 |
| select WIRELESS_EXT |
| select LIB80211 |
| select FW_LOADER |
| ---help--- |
| A library for Marvell Libertas 8xxx devices. |
| |
| config LIBERTAS_USB |
| tristate "Marvell Libertas 8388 USB 802.11b/g cards" |
| depends on LIBERTAS && USB |
| ---help--- |
| A driver for Marvell Libertas 8388 USB devices. |
| |
| config LIBERTAS_CS |
| tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" |
| depends on LIBERTAS && PCMCIA |
| select FW_LOADER |
| ---help--- |
| A driver for Marvell Libertas 8385 CompactFlash devices. |
| |
| config LIBERTAS_SDIO |
| tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards" |
| depends on LIBERTAS && MMC |
| ---help--- |
| A driver for Marvell Libertas 8385 and 8686 SDIO devices. |
| |
| config LIBERTAS_DEBUG |
| bool "Enable full debugging output in the Libertas module." |
| depends on LIBERTAS |
| ---help--- |
| Debugging support. |
| |
| config LIBERTAS_THINFIRM |
| tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" |
| depends on WLAN_80211 && MAC80211 |
| select FW_LOADER |
| ---help--- |
| A library for Marvell Libertas 8xxx devices using thinfirm. |
| |
| config LIBERTAS_THINFIRM_USB |
| tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" |
| depends on LIBERTAS_THINFIRM && USB |
| ---help--- |
| A driver for Marvell Libertas 8388 USB devices using thinfirm. |
| |
| config AIRO |
| tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" |
| depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) |
| select WIRELESS_EXT |
| select CRYPTO |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet ISA and |
| PCI 802.11 wireless cards. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| The driver can be compiled as a module and will be named "airo". |
| |
| config HERMES |
| tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" |
| depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 |
| select WIRELESS_EXT |
| select FW_LOADER |
| select CRYPTO |
| select CRYPTO_MICHAEL_MIC |
| ---help--- |
| A driver for 802.11b wireless cards based on the "Hermes" or |
| Intersil HFA384x (Prism 2) MAC controller. This includes the vast |
| majority of the PCMCIA 802.11b cards (which are nearly all rebadges) |
| - except for the Cisco/Aironet cards. Cards supported include the |
| Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, |
| Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, |
| IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear |
| MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel |
| IPW2011, and Symbol Spectrum24 High Rate amongst others. |
| |
| This option includes the guts of the driver, but in order to |
| actually use a card you will also need to enable support for PCMCIA |
| Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. |
| |
| You will also very likely also need the Wireless Tools in order to |
| configure your card and that /etc/pcmcia/wireless.opts works : |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> |
| |
| config HERMES_CACHE_FW_ON_INIT |
| bool "Cache Hermes firmware on driver initialisation" |
| depends on HERMES |
| default y |
| ---help--- |
| Say Y to cache any firmware required by the Hermes drivers |
| on startup. The firmware will remain cached until the |
| driver is unloaded. The cache uses 64K of RAM. |
| |
| Otherwise load the firmware from userspace as required. In |
| this case the driver should be unloaded and restarted |
| whenever the firmware is changed. |
| |
| If you are not sure, say Y. |
| |
| config APPLE_AIRPORT |
| tristate "Apple Airport support (built-in)" |
| depends on PPC_PMAC && HERMES |
| help |
| Say Y here to support the Airport 802.11b wireless Ethernet hardware |
| built into the Macintosh iBook and other recent PowerPC-based |
| Macintosh machines. This is essentially a Lucent Orinoco card with |
| a non-standard interface. |
| |
| This driver does not support the Airport Extreme (802.11b/g). Use |
| the BCM43xx driver for Airport Extreme cards. |
| |
| config PLX_HERMES |
| tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" |
| depends on PCI && HERMES |
| help |
| Enable support for PCMCIA cards supported by the "Hermes" (aka |
| orinoco) driver when used in PLX9052 based PCI adaptors. These |
| adaptors are not a full PCMCIA controller but act as a more limited |
| PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that |
| 802.11b PCMCIA cards can be used in desktop machines. The Netgear |
| MA301 is such an adaptor. |
| |
| config TMD_HERMES |
| tristate "Hermes in TMD7160 based PCI adaptor support" |
| depends on PCI && HERMES |
| help |
| Enable support for PCMCIA cards supported by the "Hermes" (aka |
| orinoco) driver when used in TMD7160 based PCI adaptors. These |
| adaptors are not a full PCMCIA controller but act as a more limited |
| PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that |
| 802.11b PCMCIA cards can be used in desktop machines. |
| |
| config NORTEL_HERMES |
| tristate "Nortel emobility PCI adaptor support" |
| depends on PCI && HERMES |
| help |
| Enable support for PCMCIA cards supported by the "Hermes" (aka |
| orinoco) driver when used in Nortel emobility PCI adaptors. These |
| adaptors are not full PCMCIA controllers, but act as a more limited |
| PCI <-> PCMCIA bridge. |
| |
| config PCI_HERMES |
| tristate "Prism 2.5 PCI 802.11b adaptor support" |
| depends on PCI && HERMES |
| help |
| Enable support for PCI and mini-PCI 802.11b wireless NICs based on |
| the Prism 2.5 chipset. These are true PCI cards, not the 802.11b |
| PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also |
| common. Some of the built-in wireless adaptors in laptops are of |
| this variety. |
| |
| config PCMCIA_HERMES |
| tristate "Hermes PCMCIA card support" |
| depends on PCMCIA && HERMES |
| ---help--- |
| A driver for "Hermes" chipset based PCMCIA wireless adaptors, such |
| as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ |
| EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and |
| others). It should also be usable on various Prism II based cards |
| such as the Linksys, D-Link and Farallon Skyline. It should also |
| work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. |
| |
| You will very likely need the Wireless Tools in order to |
| configure your card and that /etc/pcmcia/wireless.opts works: |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. |
| |
| config PCMCIA_SPECTRUM |
| tristate "Symbol Spectrum24 Trilogy PCMCIA card support" |
| depends on PCMCIA && HERMES |
| ---help--- |
| |
| This is a driver for 802.11b cards using RAM-loadable Symbol |
| firmware, such as Symbol Wireless Networker LA4100, CompactFlash |
| cards by Socket Communications and Intel PRO/Wireless 2011B. |
| |
| This driver requires firmware download on startup. Utilities |
| for downloading Symbol firmware are available at |
| <http://sourceforge.net/projects/orinoco/> |
| |
| config ATMEL |
| tristate "Atmel at76c50x chipset 802.11b support" |
| depends on (PCI || PCMCIA) && WLAN_80211 |
| select WIRELESS_EXT |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| A driver 802.11b wireless cards based on the Atmel fast-vnet |
| chips. This driver supports standard Linux wireless extensions. |
| |
| Many cards based on this chipset do not have flash memory |
| and need their firmware loaded at start-up. If yours is |
| one of these, you will need to provide a firmware image |
| to be loaded into the card by the driver. The Atmel |
| firmware package can be downloaded from |
| <http://www.thekelleys.org.uk/atmel> |
| |
| config PCI_ATMEL |
| tristate "Atmel at76c506 PCI cards" |
| depends on ATMEL && PCI |
| ---help--- |
| Enable support for PCI and mini-PCI cards containing the |
| Atmel at76c506 chip. |
| |
| config PCMCIA_ATMEL |
| tristate "Atmel at76c502/at76c504 PCMCIA cards" |
| depends on ATMEL && PCMCIA |
| select WIRELESS_EXT |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| Enable support for PCMCIA cards containing the |
| Atmel at76c502 and at76c504 chips. |
| |
| config AIRO_CS |
| tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" |
| depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 |
| select WIRELESS_EXT |
| select CRYPTO |
| select CRYPTO_AES |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet PCMCIA |
| 802.11 wireless cards. This driver is the same as the Aironet |
| driver part of the Linux Pcmcia package. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also |
| supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom |
| 802.11b cards. |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| config PCMCIA_WL3501 |
| tristate "Planet WL3501 PCMCIA cards" |
| depends on EXPERIMENTAL && PCMCIA && WLAN_80211 |
| select WIRELESS_EXT |
| ---help--- |
| A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. |
| It has basic support for Linux wireless extensions and initial |
| micro support for ethtool. |
| |
| config PRISM54 |
| tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' |
| depends on PCI && EXPERIMENTAL && WLAN_80211 |
| select WIRELESS_EXT |
| select FW_LOADER |
| ---help--- |
| Enable PCI and Cardbus support for the following chipset based cards: |
| |
| ISL3880 - Prism GT 802.11 b/g |
| ISL3877 - Prism Indigo 802.11 a |
| ISL3890 - Prism Duette 802.11 a/b/g |
| |
| For a complete list of supported cards visit <http://prism54.org>. |
| Here is the latest confirmed list of supported cards: |
| |
| 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) |
| Allnet ALL0271 PCI Card |
| Compex WL54G Cardbus Card |
| Corega CG-WLCB54GT Cardbus Card |
| D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 |
| I-O Data WN-G54/CB Cardbus Card |
| Kobishi XG-300 aka Z-Com Cardbus Card |
| Netgear WG511 Cardbus Card |
| Ovislink WL-5400PCI PCI Card |
| Peabird WLG-PCI PCI Card |
| Sitecom WL-100i Cardbus Card |
| Sitecom WL-110i PCI Card |
| SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card |
| SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card |
| SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card |
| Z-Com XG-900 PCI Card |
| Zyxel G-100 Cardbus Card |
| |
| If you enable this you will need a firmware file as well. |
| You will need to copy this to /usr/lib/hotplug/firmware/isl3890. |
| You can get this non-GPL'd firmware file from the Prism54 project page: |
| <http://prism54.org> |
| You will also need the /etc/hotplug/firmware.agent script from |
| a current hotplug package. |
| |
| Note: You need a motherboard with DMA support to use any of these cards |
| |
| If you want to compile the driver as a module ( = code which can be |
| inserted in and removed from the running kernel whenever you want), |
| say M here and read <file:Documentation/kbuild/modules.txt>. |
| The module will be called prism54.ko. |
| |
| config USB_ZD1201 |
| tristate "USB ZD1201 based Wireless device support" |
| depends on USB && WLAN_80211 |
| select WIRELESS_EXT |
| select FW_LOADER |
| ---help--- |
| Say Y if you want to use wireless LAN adapters based on the ZyDAS |
| ZD1201 chip. |
| |
| This driver makes the adapter appear as a normal Ethernet interface, |
| typically on wlan0. |
| |
| The zd1201 device requires external firmware to be loaded. |
| This can be found at http://linux-lc100020.sourceforge.net/ |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zd1201. |
| |
| config USB_NET_RNDIS_WLAN |
| tristate "Wireless RNDIS USB support" |
| depends on USB && WLAN_80211 && EXPERIMENTAL |
| select USB_USBNET |
| select USB_NET_CDCETHER |
| select USB_NET_RNDIS_HOST |
| select WIRELESS_EXT |
| ---help--- |
| This is a driver for wireless RNDIS devices. |
| These are USB based adapters found in devices such as: |
| |
| Buffalo WLI-U2-KG125S |
| U.S. Robotics USR5421 |
| Belkin F5D7051 |
| Linksys WUSB54GSv2 |
| Linksys WUSB54GSC |
| Asus WL169gE |
| Eminent EM4045 |
| BT Voyager 1055 |
| Linksys WUSB54GSv1 |
| U.S. Robotics USR5420 |
| BUFFALO WLI-USB-G54 |
| |
| All of these devices are based on Broadcom 4320 chip which is the |
| only wireless RNDIS chip known to date. |
| |
| If you choose to build a module, it'll be called rndis_wlan. |
| |
| config RTL8180 |
| tristate "Realtek 8180/8185 PCI support" |
| depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL |
| select EEPROM_93CX6 |
| ---help--- |
| This is a driver for RTL8180 and RTL8185 based cards. |
| These are PCI based chips found in cards such as: |
| |
| (RTL8185 802.11g) |
| A-Link WL54PC |
| |
| (RTL8180 802.11b) |
| Belkin F5D6020 v3 |
| Belkin F5D6020 v3 |
| Dlink DWL-610 |
| Dlink DWL-510 |
| Netgear MA521 |
| Level-One WPC-0101 |
| Acer Aspire 1357 LMi |
| VCTnet PC-11B1 |
| Ovislink AirLive WL-1120PCM |
| Mentor WL-PCI |
| Linksys WPC11 v4 |
| TrendNET TEW-288PI |
| D-Link DWL-520 Rev D |
| Repotec RP-WP7126 |
| TP-Link TL-WN250/251 |
| Zonet ZEW1000 |
| Longshine LCS-8031-R |
| HomeLine HLW-PCC200 |
| GigaFast WF721-AEX |
| Planet WL-3553 |
| Encore ENLWI-PCI1-NT |
| TrendNET TEW-266PC |
| Gigabyte GN-WLMR101 |
| Siemens-fujitsu Amilo D1840W |
| Edimax EW-7126 |
| PheeNet WL-11PCIR |
| Tonze PC-2100T |
| Planet WL-8303 |
| Dlink DWL-650 v M1 |
| Edimax EW-7106 |
| Q-Tec 770WC |
| Topcom Skyr@cer 4011b |
| Roper FreeLan 802.11b (edition 2004) |
| Wistron Neweb Corp CB-200B |
| Pentagram HorNET |
| QTec 775WC |
| TwinMOS Booming B Series |
| Micronet SP906BB |
| Sweex LC700010 |
| Surecom EP-9428 |
| Safecom SWLCR-1100 |
| |
| Thanks to Realtek for their support! |
| |
| config RTL8187 |
| tristate "Realtek 8187 and 8187B USB support" |
| depends on MAC80211 && USB && WLAN_80211 |
| select EEPROM_93CX6 |
| ---help--- |
| This is a driver for RTL8187 and RTL8187B based cards. |
| These are USB based chips found in devices such as: |
| |
| Netgear WG111v2 |
| Level 1 WNC-0301USB |
| Micronet SP907GK V5 |
| Encore ENUWI-G2 |
| Trendnet TEW-424UB |
| ASUS P5B Deluxe |
| Toshiba Satellite Pro series of laptops |
| Asus Wireless Link |
| |
| Thanks to Realtek for their support! |
| |
| config ADM8211 |
| tristate "ADMtek ADM8211 support" |
| depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL |
| select CRC32 |
| select EEPROM_93CX6 |
| ---help--- |
| This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. |
| These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: |
| |
| Xterasys Cardbus XN-2411b |
| Blitz NetWave Point PC |
| TrendNet 221pc |
| Belkin F5D6001 |
| SMC 2635W |
| Linksys WPC11 v1 |
| Fiberline FL-WL-200X |
| 3com Office Connect (3CRSHPW796) |
| Corega WLPCIB-11 |
| SMC 2602W V2 EU |
| D-Link DWL-520 Revision C |
| |
| However, some of these cards have been replaced with other chips |
| like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or |
| the Ralink RT2400 (SMC2635W) without a model number change. |
| |
| Thanks to Infineon-ADMtek for their support of this driver. |
| |
| config MAC80211_HWSIM |
| tristate "Simulated radio testing tool for mac80211" |
| depends on MAC80211 && WLAN_80211 |
| ---help--- |
| This driver is a developer testing tool that can be used to test |
| IEEE 802.11 networking stack (mac80211) functionality. This is not |
| needed for normal wireless LAN usage and is only for testing. See |
| Documentation/networking/mac80211_hwsim for more information on how |
| to use this tool. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called mac80211_hwsim. If unsure, say N. |
| |
| source "drivers/net/wireless/p54/Kconfig" |
| source "drivers/net/wireless/ath5k/Kconfig" |
| source "drivers/net/wireless/ath9k/Kconfig" |
| source "drivers/net/wireless/ipw2x00/Kconfig" |
| source "drivers/net/wireless/iwlwifi/Kconfig" |
| source "drivers/net/wireless/hostap/Kconfig" |
| source "drivers/net/wireless/b43/Kconfig" |
| source "drivers/net/wireless/b43legacy/Kconfig" |
| source "drivers/net/wireless/zd1211rw/Kconfig" |
| source "drivers/net/wireless/rt2x00/Kconfig" |
| |
| endmenu |