powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E
This patch adds pcie nodes to the appropriate dts files, plus adds
some probing code for the boards.
Also, remove of_device_is_avaliable() check from the mpc837x_mds.c
board file, as mpc83xx_add_bridge() has the same check now.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 9413af3..b4ab3d0 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -350,4 +352,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};