Input: whitespace fixes in drivers/usb/input
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
index 4c27c10..5122a7f 100644
--- a/drivers/usb/input/itmtouch.c
+++ b/drivers/usb/input/itmtouch.c
@@ -18,14 +18,14 @@
* Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>.
*
* Kudos to ITM for providing me with the datasheet for the panel,
- * even though it was a day later than I had finished writing this
+ * even though it was a day later than I had finished writing this
* driver.
- *
+ *
* It has meant that I've been able to correct my interpretation of the
* protocol packets however.
- *
+ *
* CC -- 2003/9/29
- *
+ *
* History
* 1.0 & 1.1 2003 (CC) vojtech@suse.cz
* Original version for 2.4.x kernels
@@ -33,10 +33,10 @@
* 1.2 02/03/2005 (HCE) hc@mivu.no
* Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
* Unfortunately no calibration support at this time.
- *
+ *
* 1.2.1 09/03/2005 (HCE) hc@mivu.no
* Code cleanup and adjusting syntax to start matching kernel standards
- *
+ *
*****************************************************************************/
#include <linux/config.h>
@@ -71,7 +71,7 @@
MODULE_LICENSE( DRIVER_LICENSE );
struct itmtouch_dev {
- struct usb_device *usbdev; /* usb device */
+ struct usb_device *usbdev; /* usb device */
struct input_dev inputdev; /* input device */
struct urb *readurb; /* urb */
char rbuf[ITM_BUFSIZE]; /* data */
@@ -121,7 +121,7 @@
input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
}
-
+
input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
input_sync(dev);
@@ -142,8 +142,7 @@
itmtouch->readurb->dev = itmtouch->usbdev;
- if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
- {
+ if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL)) {
itmtouch->users--;
return -EIO;
}
@@ -178,13 +177,13 @@
}
itmtouch->usbdev = udev;
-
+
itmtouch->inputdev.private = itmtouch;
itmtouch->inputdev.open = itmtouch_open;
itmtouch->inputdev.close = itmtouch_close;
usb_make_path(udev, path, PATH_SIZE);
-
+
itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
@@ -194,12 +193,12 @@
itmtouch->inputdev.id.bustype = BUS_USB;
itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
itmtouch->inputdev.id.product = udev->descriptor.idProduct;
- itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+ itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
itmtouch->inputdev.dev = &intf->dev;
if (!strlen(itmtouch->name))
sprintf(itmtouch->name, "USB ITM touchscreen");
-
+
/* device limits */
/* as specified by the ITM datasheet, X and Y are 12bit,
* Z (pressure) is 8 bit. However, the fields are defined up
@@ -212,26 +211,20 @@
/* initialise the URB so we can read from the transport stream */
pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-
+
if (maxp > ITM_BUFSIZE)
maxp = ITM_BUFSIZE;
itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
-
+
if (!itmtouch->readurb) {
dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
kfree(itmtouch);
return -ENOMEM;
}
-
- usb_fill_int_urb(itmtouch->readurb,
- itmtouch->usbdev,
- pipe,
- itmtouch->rbuf,
- maxp,
- itmtouch_irq,
- itmtouch,
- endpoint->bInterval);
+
+ usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
+ maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
input_register_device(&itmtouch->inputdev);
@@ -242,7 +235,7 @@
}
static void itmtouch_disconnect(struct usb_interface *intf)
-{
+{
struct itmtouch_dev *itmtouch = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
@@ -258,11 +251,11 @@
MODULE_DEVICE_TABLE(usb, itmtouch_ids);
static struct usb_driver itmtouch_driver = {
- .owner = THIS_MODULE,
- .name = "itmtouch",
- .probe = itmtouch_probe,
- .disconnect = itmtouch_disconnect,
- .id_table = itmtouch_ids,
+ .owner = THIS_MODULE,
+ .name = "itmtouch",
+ .probe = itmtouch_probe,
+ .disconnect = itmtouch_disconnect,
+ .id_table = itmtouch_ids,
};
static int __init itmtouch_init(void)