netdev: Kill NETIF_F_MULTI_QUEUE.
There is no need for a feature bit for something that
can be tested by simply checking the TX queue count.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt
index e6dc1ee..d391ea6 100644
--- a/Documentation/networking/multiqueue.txt
+++ b/Documentation/networking/multiqueue.txt
@@ -24,15 +24,4 @@
device is still operational. netdev->queue_lock is still used when the device
comes online or when it's completely shut down (unregister_netdev(), etc.).
-Finally, the base driver should indicate that it is a multiqueue device. The
-feature flag NETIF_F_MULTI_QUEUE should be added to the netdev->features
-bitmap on device initialization. Below is an example from e1000:
-
-#ifdef CONFIG_E1000_MQ
- if ( (adapter->hw.mac.type == e1000_82571) ||
- (adapter->hw.mac.type == e1000_82572) ||
- (adapter->hw.mac.type == e1000_80003es2lan))
- netdev->features |= NETIF_F_MULTI_QUEUE;
-#endif
-
Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index d630e2a..7c7b54e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1165,7 +1165,6 @@
dev->set_multicast_list = cpmac_set_multicast_list;
dev->tx_timeout = cpmac_tx_timeout;
dev->ethtool_ops = &cpmac_ethtool_ops;
- dev->features |= NETIF_F_MULTI_QUEUE;
netif_napi_add(dev, &priv->napi, cpmac_poll, 64);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 64a150a..471c194 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1155,8 +1155,6 @@
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |= NETIF_F_MULTI_QUEUE;
-
netdev->features |= NETIF_F_LLTX;
adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7d8bf94..e6df923 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3566,8 +3566,6 @@
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |= NETIF_F_MULTI_QUEUE;
-
/* make sure the EEPROM is good */
if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 517425d..5f0fcb0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7966,8 +7966,6 @@
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
- if (config->multiq)
- dev->features |= NETIF_F_MULTI_QUEUE;
dev->tx_timeout = &s2io_tx_watchdog;
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f25d4f5..c02227b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -533,7 +533,6 @@
#define NETIF_F_LLTX 4096 /* LockLess TX - deprecated. Please */
/* do not use LLTX in new drivers */
#define NETIF_F_NETNS_LOCAL 8192 /* Does not change network namespaces */
-#define NETIF_F_MULTI_QUEUE 16384 /* Has multiple TX/RX queues */
#define NETIF_F_LRO 32768 /* large receive offload */
/* Segmentation offload features */
@@ -1163,11 +1162,10 @@
* @dev: network device
*
* Check if device has multiple transmit queues
- * Always falls if NETDEVICE_MULTIQUEUE is not configured
*/
static inline int netif_is_multiqueue(const struct net_device *dev)
{
- return (!!(NETIF_F_MULTI_QUEUE & dev->features));
+ return (dev->num_tx_queues > 1);
}
/* Use this variant when it is known for sure that it
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index b486e63..c74607e 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1678,9 +1678,6 @@
if (!mdev)
goto fail_mdev_alloc;
- if (ieee80211_num_queues(hw) > 1)
- mdev->features |= NETIF_F_MULTI_QUEUE;
-
mwdev = netdev_priv(mdev);
mdev->ieee80211_ptr = mwdev;
mwdev->wiphy = local->hw.wiphy;