| /* |
| * Version 2.13 |
| * |
| * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 |
| * IDE driver for Linux. |
| * |
| * Copyright (c) 2000-2002 Vojtech Pavlik |
| * |
| * Based on the work of: |
| * Andre Hedrick |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/ioport.h> |
| #include <linux/blkdev.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/ide.h> |
| #include <asm/io.h> |
| |
| #include "ide-timing.h" |
| |
| #define DISPLAY_AMD_TIMINGS |
| |
| #define AMD_IDE_ENABLE (0x00 + amd_config->base) |
| #define AMD_IDE_CONFIG (0x01 + amd_config->base) |
| #define AMD_CABLE_DETECT (0x02 + amd_config->base) |
| #define AMD_DRIVE_TIMING (0x08 + amd_config->base) |
| #define AMD_8BIT_TIMING (0x0e + amd_config->base) |
| #define AMD_ADDRESS_SETUP (0x0c + amd_config->base) |
| #define AMD_UDMA_TIMING (0x10 + amd_config->base) |
| |
| #define AMD_UDMA 0x07 |
| #define AMD_UDMA_33 0x01 |
| #define AMD_UDMA_66 0x02 |
| #define AMD_UDMA_100 0x03 |
| #define AMD_UDMA_133 0x04 |
| #define AMD_CHECK_SWDMA 0x08 |
| #define AMD_BAD_SWDMA 0x10 |
| #define AMD_BAD_FIFO 0x20 |
| #define AMD_CHECK_SERENADE 0x40 |
| |
| /* |
| * AMD SouthBridge chips. |
| */ |
| |
| static struct amd_ide_chip { |
| unsigned short id; |
| unsigned long base; |
| unsigned char flags; |
| } amd_ide_chips[] = { |
| { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA }, |
| { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA }, |
| { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO }, |
| { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, AMD_UDMA_100 }, |
| { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, AMD_UDMA_100 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 }, |
| { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, |
| { 0 } |
| }; |
| |
| static struct amd_ide_chip *amd_config; |
| static ide_pci_device_t *amd_chipset; |
| static unsigned int amd_80w; |
| static unsigned int amd_clock; |
| |
| static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; |
| static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; |
| |
| /* |
| * AMD /proc entry. |
| */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| #include <linux/stat.h> |
| #include <linux/proc_fs.h> |
| |
| static u8 amd74xx_proc; |
| |
| static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 15 }; |
| static unsigned long amd_base; |
| static struct pci_dev *bmide_dev; |
| extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */ |
| |
| #define amd_print(format, arg...) p += sprintf(p, format "\n" , ## arg) |
| #define amd_print_drive(name, format, arg...)\ |
| p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); |
| |
| static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count) |
| { |
| int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], |
| uen[4], udma[4], active8b[4], recover8b[4]; |
| struct pci_dev *dev = bmide_dev; |
| unsigned int v, u, i; |
| unsigned short c, w; |
| unsigned char t; |
| int len; |
| char *p = buffer; |
| |
| amd_print("----------AMD BusMastering IDE Configuration----------------"); |
| |
| amd_print("Driver Version: 2.13"); |
| amd_print("South Bridge: %s", pci_name(bmide_dev)); |
| |
| pci_read_config_byte(dev, PCI_REVISION_ID, &t); |
| amd_print("Revision: IDE %#x", t); |
| amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]); |
| |
| amd_print("BM-DMA base: %#lx", amd_base); |
| amd_print("PCI clock: %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10); |
| |
| amd_print("-----------------------Primary IDE-------Secondary IDE------"); |
| |
| pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); |
| amd_print("Prefetch Buffer: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); |
| amd_print("Post Write Buffer: %10s%20s", (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); |
| |
| pci_read_config_byte(dev, AMD_IDE_ENABLE, &t); |
| amd_print("Enabled: %10s%20s", (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); |
| |
| c = inb(amd_base + 0x02) | (inb(amd_base + 0x0a) << 8); |
| amd_print("Simplex only: %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); |
| |
| amd_print("Cable Type: %10s%20s", (amd_80w & 1) ? "80w" : "40w", (amd_80w & 2) ? "80w" : "40w"); |
| |
| if (!amd_clock) |
| return p - buffer; |
| |
| amd_print("-------------------drive0----drive1----drive2----drive3-----"); |
| |
| pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); |
| pci_read_config_dword(dev, AMD_DRIVE_TIMING, &v); |
| pci_read_config_word(dev, AMD_8BIT_TIMING, &w); |
| pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); |
| |
| for (i = 0; i < 4; i++) { |
| setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; |
| recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; |
| active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; |
| active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; |
| recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; |
| |
| udma[i] = amd_udma2cyc[((u >> ((3 - i) << 3)) & 0x7)]; |
| uen[i] = ((u >> ((3 - i) << 3)) & 0x40) ? 1 : 0; |
| den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); |
| |
| if (den[i] && uen[i] && udma[i] == 1) { |
| speed[i] = amd_clock * 3; |
| cycle[i] = 666666 / amd_clock; |
| continue; |
| } |
| |
| if (den[i] && uen[i] && udma[i] == 15) { |
| speed[i] = amd_clock * 4; |
| cycle[i] = 500000 / amd_clock; |
| continue; |
| } |
| |
| speed[i] = 4 * amd_clock / ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2); |
| cycle[i] = 1000000 * ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2) / amd_clock / 2; |
| } |
| |
| amd_print_drive("Transfer Mode: ", "%10s", den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); |
| |
| amd_print_drive("Address Setup: ", "%8dns", 1000000 * setup[i] / amd_clock); |
| amd_print_drive("Cmd Active: ", "%8dns", 1000000 * active8b[i] / amd_clock); |
| amd_print_drive("Cmd Recovery: ", "%8dns", 1000000 * recover8b[i] / amd_clock); |
| amd_print_drive("Data Active: ", "%8dns", 1000000 * active[i] / amd_clock); |
| amd_print_drive("Data Recovery: ", "%8dns", 1000000 * recover[i] / amd_clock); |
| amd_print_drive("Cycle Time: ", "%8dns", cycle[i]); |
| amd_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 1000, speed[i] / 100 % 10); |
| |
| /* hoping p - buffer is less than 4K... */ |
| len = (p - buffer) - offset; |
| *addr = buffer + offset; |
| |
| return len > count ? count : len; |
| } |
| |
| #endif |
| |
| /* |
| * amd_set_speed() writes timing values to the chipset registers |
| */ |
| |
| static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing) |
| { |
| unsigned char t; |
| |
| pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); |
| t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); |
| pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t); |
| |
| pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)), |
| ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); |
| |
| pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn), |
| ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); |
| |
| switch (amd_config->flags & AMD_UDMA) { |
| case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; |
| case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; |
| case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; |
| case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; |
| default: return; |
| } |
| |
| pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t); |
| } |
| |
| /* |
| * amd_set_drive() computes timing values configures the drive and |
| * the chipset to a desired transfer mode. It also can be called |
| * by upper layers. |
| */ |
| |
| static int amd_set_drive(ide_drive_t *drive, u8 speed) |
| { |
| ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); |
| struct ide_timing t, p; |
| int T, UT; |
| |
| if (speed != XFER_PIO_SLOW && speed != drive->current_speed) |
| if (ide_config_drive_speed(drive, speed)) |
| printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n", |
| drive->dn >> 1, drive->dn & 1); |
| |
| T = 1000000000 / amd_clock; |
| UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2); |
| |
| ide_timing_compute(drive, speed, &t, T, UT); |
| |
| if (peer->present) { |
| ide_timing_compute(peer, peer->current_speed, &p, T, UT); |
| ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); |
| } |
| |
| if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; |
| if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; |
| |
| amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); |
| |
| if (!drive->init_speed) |
| drive->init_speed = speed; |
| drive->current_speed = speed; |
| |
| return 0; |
| } |
| |
| /* |
| * amd74xx_tune_drive() is a callback from upper layers for |
| * PIO-only tuning. |
| */ |
| |
| static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio) |
| { |
| if (pio == 255) { |
| amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); |
| return; |
| } |
| |
| amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); |
| } |
| |
| /* |
| * amd74xx_dmaproc() is a callback from upper layers that can do |
| * a lot, but we use it for DMA/PIO tuning only, delegating everything |
| * else to the default ide_dmaproc(). |
| */ |
| |
| static int amd74xx_ide_dma_check(ide_drive_t *drive) |
| { |
| int w80 = HWIF(drive)->udma_four; |
| |
| u8 speed = ide_find_best_mode(drive, |
| XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA | |
| ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) | |
| (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) | |
| (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) | |
| (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0)); |
| |
| amd_set_drive(drive, speed); |
| |
| if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) |
| return HWIF(drive)->ide_dma_on(drive); |
| return HWIF(drive)->ide_dma_off_quietly(drive); |
| } |
| |
| /* |
| * The initialization callback. Here we determine the IDE chip type |
| * and initialize its drive independent registers. |
| */ |
| |
| static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name) |
| { |
| unsigned char t; |
| unsigned int u; |
| int i; |
| |
| /* |
| * Check for bad SWDMA. |
| */ |
| |
| if (amd_config->flags & AMD_CHECK_SWDMA) { |
| pci_read_config_byte(dev, PCI_REVISION_ID, &t); |
| if (t <= 7) |
| amd_config->flags |= AMD_BAD_SWDMA; |
| } |
| |
| /* |
| * Check 80-wire cable presence. |
| */ |
| |
| switch (amd_config->flags & AMD_UDMA) { |
| |
| case AMD_UDMA_133: |
| case AMD_UDMA_100: |
| pci_read_config_byte(dev, AMD_CABLE_DETECT, &t); |
| pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); |
| amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); |
| for (i = 24; i >= 0; i -= 8) |
| if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { |
| printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n", |
| amd_chipset->name); |
| amd_80w |= (1 << (1 - (i >> 4))); |
| } |
| break; |
| |
| case AMD_UDMA_66: |
| /* no host side cable detection */ |
| amd_80w = 0x03; |
| break; |
| } |
| |
| /* |
| * Take care of prefetch & postwrite. |
| */ |
| |
| pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); |
| pci_write_config_byte(dev, AMD_IDE_CONFIG, |
| (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0)); |
| |
| /* |
| * Take care of incorrectly wired Serenade mainboards. |
| */ |
| |
| if ((amd_config->flags & AMD_CHECK_SERENADE) && |
| dev->subsystem_vendor == PCI_VENDOR_ID_AMD && |
| dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) |
| amd_config->flags = AMD_UDMA_100; |
| |
| /* |
| * Determine the system bus clock. |
| */ |
| |
| amd_clock = system_bus_clock() * 1000; |
| |
| switch (amd_clock) { |
| case 33000: amd_clock = 33333; break; |
| case 37000: amd_clock = 37500; break; |
| case 41000: amd_clock = 41666; break; |
| } |
| |
| if (amd_clock < 20000 || amd_clock > 50000) { |
| printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", |
| amd_chipset->name, amd_clock); |
| amd_clock = 33333; |
| } |
| |
| /* |
| * Print the boot message. |
| */ |
| |
| pci_read_config_byte(dev, PCI_REVISION_ID, &t); |
| printk(KERN_INFO "%s: %s (rev %02x) %s controller\n", |
| amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]); |
| |
| /* |
| * Register /proc/ide/amd74xx entry |
| */ |
| |
| #if defined(DISPLAY_AMD_TIMINGS) && defined(CONFIG_PROC_FS) |
| if (!amd74xx_proc) { |
| amd_base = pci_resource_start(dev, 4); |
| bmide_dev = dev; |
| ide_pci_create_host_proc("amd74xx", amd74xx_get_info); |
| amd74xx_proc = 1; |
| } |
| #endif /* DISPLAY_AMD_TIMINGS && CONFIG_PROC_FS */ |
| |
| return dev->irq; |
| } |
| |
| static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) |
| { |
| int i; |
| |
| if (hwif->irq == 0) /* 0 is bogus but will do for now */ |
| hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel); |
| |
| hwif->autodma = 0; |
| |
| hwif->tuneproc = &amd74xx_tune_drive; |
| hwif->speedproc = &amd_set_drive; |
| |
| for (i = 0; i < 2; i++) { |
| hwif->drives[i].io_32bit = 1; |
| hwif->drives[i].unmask = 1; |
| hwif->drives[i].autotune = 1; |
| hwif->drives[i].dn = hwif->channel * 2 + i; |
| } |
| |
| if (!hwif->dma_base) |
| return; |
| |
| hwif->atapi_dma = 1; |
| hwif->ultra_mask = 0x7f; |
| hwif->mwdma_mask = 0x07; |
| hwif->swdma_mask = 0x07; |
| |
| if (!hwif->udma_four) |
| hwif->udma_four = (amd_80w >> hwif->channel) & 1; |
| hwif->ide_dma_check = &amd74xx_ide_dma_check; |
| if (!noautodma) |
| hwif->autodma = 1; |
| hwif->drives[0].autodma = hwif->autodma; |
| hwif->drives[1].autodma = hwif->autodma; |
| } |
| |
| #define DECLARE_AMD_DEV(name_str) \ |
| { \ |
| .name = name_str, \ |
| .init_chipset = init_chipset_amd74xx, \ |
| .init_hwif = init_hwif_amd74xx, \ |
| .channels = 2, \ |
| .autodma = AUTODMA, \ |
| .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ |
| .bootable = ON_BOARD, \ |
| } |
| |
| #define DECLARE_NV_DEV(name_str) \ |
| { \ |
| .name = name_str, \ |
| .init_chipset = init_chipset_amd74xx, \ |
| .init_hwif = init_hwif_amd74xx, \ |
| .channels = 2, \ |
| .autodma = AUTODMA, \ |
| .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ |
| .bootable = ON_BOARD, \ |
| } |
| |
| static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { |
| /* 0 */ DECLARE_AMD_DEV("AMD7401"), |
| /* 1 */ DECLARE_AMD_DEV("AMD7409"), |
| /* 2 */ DECLARE_AMD_DEV("AMD7411"), |
| /* 3 */ DECLARE_AMD_DEV("AMD7441"), |
| /* 4 */ DECLARE_AMD_DEV("AMD8111"), |
| |
| /* 5 */ DECLARE_NV_DEV("NFORCE"), |
| /* 6 */ DECLARE_NV_DEV("NFORCE2"), |
| /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"), |
| /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"), |
| /* 9 */ DECLARE_NV_DEV("NFORCE3-150"), |
| /* 10 */ DECLARE_NV_DEV("NFORCE3-250"), |
| /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"), |
| /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"), |
| /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"), |
| /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), |
| /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), |
| /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), |
| /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), |
| /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"), |
| /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"), |
| /* 20 */ DECLARE_AMD_DEV("AMD5536"), |
| }; |
| |
| static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| amd_chipset = amd74xx_chipsets + id->driver_data; |
| amd_config = amd_ide_chips + id->driver_data; |
| if (dev->device != amd_config->id) { |
| printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n", |
| pci_name(dev), dev->device, amd_config->id); |
| return -ENODEV; |
| } |
| return ide_setup_pci_device(dev, amd_chipset); |
| } |
| |
| static struct pci_device_id amd74xx_pci_tbl[] = { |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, |
| #ifdef CONFIG_BLK_DEV_IDE_SATA |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, |
| #endif |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, |
| #ifdef CONFIG_BLK_DEV_IDE_SATA |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, |
| #endif |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); |
| |
| static struct pci_driver driver = { |
| .name = "AMD_IDE", |
| .id_table = amd74xx_pci_tbl, |
| .probe = amd74xx_probe, |
| }; |
| |
| static int __init amd74xx_ide_init(void) |
| { |
| return ide_pci_register_driver(&driver); |
| } |
| |
| module_init(amd74xx_ide_init); |
| |
| MODULE_AUTHOR("Vojtech Pavlik"); |
| MODULE_DESCRIPTION("AMD PCI IDE driver"); |
| MODULE_LICENSE("GPL"); |