| #define USE_PCI_CLOCK |
| static char rcsid[] = |
| "Revision: 3.4.5 Date: 2002/03/07 "; |
| |
| /* |
| * pc300.c Cyclades-PC300(tm) Driver. |
| * |
| * Author: Ivan Passos <ivan@cyclades.com> |
| * Maintainer: PC300 Maintainer <pc300@cyclades.com> |
| * |
| * Copyright: (c) 1999-2003 Cyclades Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Using tabstop = 4. |
| * |
| * $Log: pc300_drv.c,v $ |
| * Revision 3.23 2002/03/20 13:58:40 henrique |
| * Fixed ortographic mistakes |
| * |
| * Revision 3.22 2002/03/13 16:56:56 henrique |
| * Take out the debug messages |
| * |
| * Revision 3.21 2002/03/07 14:17:09 henrique |
| * License data fixed |
| * |
| * Revision 3.20 2002/01/17 17:58:52 ivan |
| * Support for PC300-TE/M (PMC). |
| * |
| * Revision 3.19 2002/01/03 17:08:47 daniela |
| * Enables DMA reception when the SCA-II disables it improperly. |
| * |
| * Revision 3.18 2001/12/03 18:47:50 daniela |
| * Esthetic changes. |
| * |
| * Revision 3.17 2001/10/19 16:50:13 henrique |
| * Patch to kernel 2.4.12 and new generic hdlc. |
| * |
| * Revision 3.16 2001/10/16 15:12:31 regina |
| * clear statistics |
| * |
| * Revision 3.11 to 3.15 2001/10/11 20:26:04 daniela |
| * More DMA fixes for noisy lines. |
| * Return the size of bad frames in dma_get_rx_frame_size, so that the Rx buffer |
| * descriptors can be cleaned by dma_buf_read (called in cpc_net_rx). |
| * Renamed dma_start routine to rx_dma_start. Improved Rx statistics. |
| * Fixed BOF interrupt treatment. Created dma_start routine. |
| * Changed min and max to cpc_min and cpc_max. |
| * |
| * Revision 3.10 2001/08/06 12:01:51 regina |
| * Fixed problem in DSR_DE bit. |
| * |
| * Revision 3.9 2001/07/18 19:27:26 daniela |
| * Added some history comments. |
| * |
| * Revision 3.8 2001/07/12 13:11:19 regina |
| * bug fix - DCD-OFF in pc300 tty driver |
| * |
| * Revision 3.3 to 3.7 2001/07/06 15:00:20 daniela |
| * Removing kernel 2.4.3 and previous support. |
| * DMA transmission bug fix. |
| * MTU check in cpc_net_rx fixed. |
| * Boot messages reviewed. |
| * New configuration parameters (line code, CRC calculation and clock). |
| * |
| * Revision 3.2 2001/06/22 13:13:02 regina |
| * MLPPP implementation. Changed the header of message trace to include |
| * the device name. New format : "hdlcX[R/T]: ". |
| * Default configuration changed. |
| * |
| * Revision 3.1 2001/06/15 regina |
| * in cpc_queue_xmit, netif_stop_queue is called if don't have free descriptor |
| * upping major version number |
| * |
| * Revision 1.1.1.1 2001/06/13 20:25:04 daniela |
| * PC300 initial CVS version (3.4.0-pre1) |
| * |
| * Revision 3.0.1.2 2001/06/08 daniela |
| * Did some changes in the DMA programming implementation to avoid the |
| * occurrence of a SCA-II bug when CDA is accessed during a DMA transfer. |
| * |
| * Revision 3.0.1.1 2001/05/02 daniela |
| * Added kernel 2.4.3 support. |
| * |
| * Revision 3.0.1.0 2001/03/13 daniela, henrique |
| * Added Frame Relay Support. |
| * Driver now uses HDLC generic driver to provide protocol support. |
| * |
| * Revision 3.0.0.8 2001/03/02 daniela |
| * Fixed ram size detection. |
| * Changed SIOCGPC300CONF ioctl, to give hw information to pc300util. |
| * |
| * Revision 3.0.0.7 2001/02/23 daniela |
| * netif_stop_queue called before the SCA-II transmition commands in |
| * cpc_queue_xmit, and with interrupts disabled to avoid race conditions with |
| * transmition interrupts. |
| * Fixed falc_check_status for Unframed E1. |
| * |
| * Revision 3.0.0.6 2000/12/13 daniela |
| * Implemented pc300util support: trace, statistics, status and loopback |
| * tests for the PC300 TE boards. |
| * |
| * Revision 3.0.0.5 2000/12/12 ivan |
| * Added support for Unframed E1. |
| * Implemented monitor mode. |
| * Fixed DCD sensitivity on the second channel. |
| * Driver now complies with new PCI kernel architecture. |
| * |
| * Revision 3.0.0.4 2000/09/28 ivan |
| * Implemented DCD sensitivity. |
| * Moved hardware-specific open to the end of cpc_open, to avoid race |
| * conditions with early reception interrupts. |
| * Included code for [request|release]_mem_region(). |
| * Changed location of pc300.h . |
| * Minor code revision (contrib. of Jeff Garzik). |
| * |
| * Revision 3.0.0.3 2000/07/03 ivan |
| * Previous bugfix for the framing errors with external clock made X21 |
| * boards stop working. This version fixes it. |
| * |
| * Revision 3.0.0.2 2000/06/23 ivan |
| * Revisited cpc_queue_xmit to prevent race conditions on Tx DMA buffer |
| * handling when Tx timeouts occur. |
| * Revisited Rx statistics. |
| * Fixed a bug in the SCA-II programming that would cause framing errors |
| * when external clock was configured. |
| * |
| * Revision 3.0.0.1 2000/05/26 ivan |
| * Added logic in the SCA interrupt handler so that no board can monopolize |
| * the driver. |
| * Request PLX I/O region, although driver doesn't use it, to avoid |
| * problems with other drivers accessing it. |
| * |
| * Revision 3.0.0.0 2000/05/15 ivan |
| * Did some changes in the DMA programming implementation to avoid the |
| * occurrence of a SCA-II bug in the second channel. |
| * Implemented workaround for PLX9050 bug that would cause a system lockup |
| * in certain systems, depending on the MMIO addresses allocated to the |
| * board. |
| * Fixed the FALC chip programming to avoid synchronization problems in the |
| * second channel (TE only). |
| * Implemented a cleaner and faster Tx DMA descriptor cleanup procedure in |
| * cpc_queue_xmit(). |
| * Changed the built-in driver implementation so that the driver can use the |
| * general 'hdlcN' naming convention instead of proprietary device names. |
| * Driver load messages are now device-centric, instead of board-centric. |
| * Dynamic allocation of net_device structures. |
| * Code is now compliant with the new module interface (module_[init|exit]). |
| * Make use of the PCI helper functions to access PCI resources. |
| * |
| * Revision 2.0.0.0 2000/04/15 ivan |
| * Added support for the PC300/TE boards (T1/FT1/E1/FE1). |
| * |
| * Revision 1.1.0.0 2000/02/28 ivan |
| * Major changes in the driver architecture. |
| * Softnet compliancy implemented. |
| * Driver now reports physical instead of virtual memory addresses. |
| * Added cpc_change_mtu function. |
| * |
| * Revision 1.0.0.0 1999/12/16 ivan |
| * First official release. |
| * Support for 1- and 2-channel boards (which use distinct PCI Device ID's). |
| * Support for monolythic installation (i.e., drv built into the kernel). |
| * X.25 additional checking when lapb_[dis]connect_request returns an error. |
| * SCA programming now covers X.21 as well. |
| * |
| * Revision 0.3.1.0 1999/11/18 ivan |
| * Made X.25 support configuration-dependent (as it depends on external |
| * modules to work). |
| * Changed X.25-specific function names to comply with adopted convention. |
| * Fixed typos in X.25 functions that would cause compile errors (Daniela). |
| * Fixed bug in ch_config that would disable interrupts on a previously |
| * enabled channel if the other channel on the same board was enabled later. |
| * |
| * Revision 0.3.0.0 1999/11/16 daniela |
| * X.25 support. |
| * |
| * Revision 0.2.3.0 1999/11/15 ivan |
| * Function cpc_ch_status now provides more detailed information. |
| * Added support for X.21 clock configuration. |
| * Changed TNR1 setting in order to prevent Tx FIFO overaccesses by the SCA. |
| * Now using PCI clock instead of internal oscillator clock for the SCA. |
| * |
| * Revision 0.2.2.0 1999/11/10 ivan |
| * Changed the *_dma_buf_check functions so that they would print only |
| * the useful info instead of the whole buffer descriptor bank. |
| * Fixed bug in cpc_queue_xmit that would eventually crash the system |
| * in case of a packet drop. |
| * Implemented TX underrun handling. |
| * Improved SCA fine tuning to boost up its performance. |
| * |
| * Revision 0.2.1.0 1999/11/03 ivan |
| * Added functions *dma_buf_pt_init to allow independent initialization |
| * of the next-descr. and DMA buffer pointers on the DMA descriptors. |
| * Kernel buffer release and tbusy clearing is now done in the interrupt |
| * handler. |
| * Fixed bug in cpc_open that would cause an interface reopen to fail. |
| * Added a protocol-specific code section in cpc_net_rx. |
| * Removed printk level defs (they might be added back after the beta phase). |
| * |
| * Revision 0.2.0.0 1999/10/28 ivan |
| * Revisited the code so that new protocols can be easily added / supported. |
| * |
| * Revision 0.1.0.1 1999/10/20 ivan |
| * Mostly "esthetic" changes. |
| * |
| * Revision 0.1.0.0 1999/10/11 ivan |
| * Initial version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/net.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/netdevice.h> |
| #include <linux/spinlock.h> |
| #include <linux/if.h> |
| |
| #include <net/syncppp.h> |
| #include <net/arp.h> |
| |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| |
| #include "pc300.h" |
| |
| #define CPC_LOCK(card,flags) \ |
| do { \ |
| spin_lock_irqsave(&card->card_lock, flags); \ |
| } while (0) |
| |
| #define CPC_UNLOCK(card,flags) \ |
| do { \ |
| spin_unlock_irqrestore(&card->card_lock, flags); \ |
| } while (0) |
| |
| #undef PC300_DEBUG_PCI |
| #undef PC300_DEBUG_INTR |
| #undef PC300_DEBUG_TX |
| #undef PC300_DEBUG_RX |
| #undef PC300_DEBUG_OTHER |
| |
| static struct pci_device_id cpc_pci_dev_id[] __devinitdata = { |
| /* PC300/RSV or PC300/X21, 2 chan */ |
| {0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300}, |
| /* PC300/RSV or PC300/X21, 1 chan */ |
| {0x120e, 0x301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x301}, |
| /* PC300/TE, 2 chan */ |
| {0x120e, 0x310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x310}, |
| /* PC300/TE, 1 chan */ |
| {0x120e, 0x311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x311}, |
| /* PC300/TE-M, 2 chan */ |
| {0x120e, 0x320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x320}, |
| /* PC300/TE-M, 1 chan */ |
| {0x120e, 0x321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x321}, |
| /* End of table */ |
| {0,}, |
| }; |
| MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id); |
| |
| #ifndef cpc_min |
| #define cpc_min(a,b) (((a)<(b))?(a):(b)) |
| #endif |
| #ifndef cpc_max |
| #define cpc_max(a,b) (((a)>(b))?(a):(b)) |
| #endif |
| |
| /* prototypes */ |
| static void tx_dma_buf_pt_init(pc300_t *, int); |
| static void tx_dma_buf_init(pc300_t *, int); |
| static void rx_dma_buf_pt_init(pc300_t *, int); |
| static void rx_dma_buf_init(pc300_t *, int); |
| static void tx_dma_buf_check(pc300_t *, int); |
| static void rx_dma_buf_check(pc300_t *, int); |
| static irqreturn_t cpc_intr(int, void *); |
| static struct net_device_stats *cpc_get_stats(struct net_device *); |
| static int clock_rate_calc(uclong, uclong, int *); |
| static uclong detect_ram(pc300_t *); |
| static void plx_init(pc300_t *); |
| static void cpc_trace(struct net_device *, struct sk_buff *, char); |
| static int cpc_attach(struct net_device *, unsigned short, unsigned short); |
| static int cpc_close(struct net_device *dev); |
| |
| #ifdef CONFIG_PC300_MLPPP |
| void cpc_tty_init(pc300dev_t * dev); |
| void cpc_tty_unregister_service(pc300dev_t * pc300dev); |
| void cpc_tty_receive(pc300dev_t * pc300dev); |
| void cpc_tty_trigger_poll(pc300dev_t * pc300dev); |
| void cpc_tty_reset_var(void); |
| #endif |
| |
| /************************/ |
| /*** DMA Routines ***/ |
| /************************/ |
| static void tx_dma_buf_pt_init(pc300_t * card, int ch) |
| { |
| int i; |
| int ch_factor = ch * N_DMA_TX_BUF; |
| volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase |
| + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); |
| |
| for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { |
| cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE + |
| (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t))); |
| cpc_writel(&ptdescr->ptbuf, |
| (uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); |
| } |
| } |
| |
| static void tx_dma_buf_init(pc300_t * card, int ch) |
| { |
| int i; |
| int ch_factor = ch * N_DMA_TX_BUF; |
| volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase |
| + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); |
| |
| for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { |
| memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); |
| cpc_writew(&ptdescr->len, 0); |
| cpc_writeb(&ptdescr->status, DST_OSB); |
| } |
| tx_dma_buf_pt_init(card, ch); |
| } |
| |
| static void rx_dma_buf_pt_init(pc300_t * card, int ch) |
| { |
| int i; |
| int ch_factor = ch * N_DMA_RX_BUF; |
| volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase |
| + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); |
| |
| for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { |
| cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE + |
| (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); |
| cpc_writel(&ptdescr->ptbuf, |
| (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); |
| } |
| } |
| |
| static void rx_dma_buf_init(pc300_t * card, int ch) |
| { |
| int i; |
| int ch_factor = ch * N_DMA_RX_BUF; |
| volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase |
| + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); |
| |
| for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { |
| memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); |
| cpc_writew(&ptdescr->len, 0); |
| cpc_writeb(&ptdescr->status, 0); |
| } |
| rx_dma_buf_pt_init(card, ch); |
| } |
| |
| static void tx_dma_buf_check(pc300_t * card, int ch) |
| { |
| volatile pcsca_bd_t __iomem *ptdescr; |
| int i; |
| ucshort first_bd = card->chan[ch].tx_first_bd; |
| ucshort next_bd = card->chan[ch].tx_next_bd; |
| |
| printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch, |
| first_bd, TX_BD_ADDR(ch, first_bd), |
| next_bd, TX_BD_ADDR(ch, next_bd)); |
| for (i = first_bd, |
| ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, first_bd)); |
| i != ((next_bd + 1) & (N_DMA_TX_BUF - 1)); |
| i = (i + 1) & (N_DMA_TX_BUF - 1), |
| ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i))) { |
| printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", |
| ch, i, cpc_readl(&ptdescr->next), |
| cpc_readl(&ptdescr->ptbuf), |
| cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); |
| } |
| printk("\n"); |
| } |
| |
| #ifdef PC300_DEBUG_OTHER |
| /* Show all TX buffer descriptors */ |
| static void tx1_dma_buf_check(pc300_t * card, int ch) |
| { |
| volatile pcsca_bd_t __iomem *ptdescr; |
| int i; |
| ucshort first_bd = card->chan[ch].tx_first_bd; |
| ucshort next_bd = card->chan[ch].tx_next_bd; |
| uclong scabase = card->hw.scabase; |
| |
| printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd); |
| printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch, |
| first_bd, TX_BD_ADDR(ch, first_bd), |
| next_bd, TX_BD_ADDR(ch, next_bd)); |
| printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", |
| cpc_readl(scabase + DTX_REG(CDAL, ch)), |
| cpc_readl(scabase + DTX_REG(EDAL, ch))); |
| for (i = 0; i < N_DMA_TX_BUF; i++) { |
| ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i)); |
| printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", |
| ch, i, cpc_readl(&ptdescr->next), |
| cpc_readl(&ptdescr->ptbuf), |
| cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); |
| } |
| printk("\n"); |
| } |
| #endif |
| |
| static void rx_dma_buf_check(pc300_t * card, int ch) |
| { |
| volatile pcsca_bd_t __iomem *ptdescr; |
| int i; |
| ucshort first_bd = card->chan[ch].rx_first_bd; |
| ucshort last_bd = card->chan[ch].rx_last_bd; |
| int ch_factor; |
| |
| ch_factor = ch * N_DMA_RX_BUF; |
| printk("#CH%d: f_bd = %d, l_bd = %d\n", ch, first_bd, last_bd); |
| for (i = 0, ptdescr = (card->hw.rambase + |
| DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); |
| i < N_DMA_RX_BUF; i++, ptdescr++) { |
| if (cpc_readb(&ptdescr->status) & DST_OSB) |
| printk ("\n CH%d RX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", |
| ch, i, cpc_readl(&ptdescr->next), |
| cpc_readl(&ptdescr->ptbuf), |
| cpc_readb(&ptdescr->status), |
| cpc_readw(&ptdescr->len)); |
| } |
| printk("\n"); |
| } |
| |
| static int dma_get_rx_frame_size(pc300_t * card, int ch) |
| { |
| volatile pcsca_bd_t __iomem *ptdescr; |
| ucshort first_bd = card->chan[ch].rx_first_bd; |
| int rcvd = 0; |
| volatile ucchar status; |
| |
| ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd)); |
| while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { |
| rcvd += cpc_readw(&ptdescr->len); |
| first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1); |
| if ((status & DST_EOM) || (first_bd == card->chan[ch].rx_last_bd)) { |
| /* Return the size of a good frame or incomplete bad frame |
| * (dma_buf_read will clean the buffer descriptors in this case). */ |
| return (rcvd); |
| } |
| ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); |
| } |
| return (-1); |
| } |
| |
| /* |
| * dma_buf_write: writes a frame to the Tx DMA buffers |
| * NOTE: this function writes one frame at a time. |
| */ |
| static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) |
| { |
| int i, nchar; |
| volatile pcsca_bd_t __iomem *ptdescr; |
| int tosend = len; |
| ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1; |
| |
| if (nbuf >= card->chan[ch].nfree_tx_bd) { |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < nbuf; i++) { |
| ptdescr = (card->hw.rambase + |
| TX_BD_ADDR(ch, card->chan[ch].tx_next_bd)); |
| nchar = cpc_min(BD_DEF_LEN, tosend); |
| if (cpc_readb(&ptdescr->status) & DST_OSB) { |
| memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)), |
| &ptdata[len - tosend], nchar); |
| cpc_writew(&ptdescr->len, nchar); |
| card->chan[ch].nfree_tx_bd--; |
| if ((i + 1) == nbuf) { |
| /* This must be the last BD to be used */ |
| cpc_writeb(&ptdescr->status, DST_EOM); |
| } else { |
| cpc_writeb(&ptdescr->status, 0); |
| } |
| } else { |
| return -ENOMEM; |
| } |
| tosend -= nchar; |
| card->chan[ch].tx_next_bd = |
| (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1); |
| } |
| /* If it gets to here, it means we have sent the whole frame */ |
| return 0; |
| } |
| |
| /* |
| * dma_buf_read: reads a frame from the Rx DMA buffers |
| * NOTE: this function reads one frame at a time. |
| */ |
| static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) |
| { |
| int nchar; |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| volatile pcsca_bd_t __iomem *ptdescr; |
| int rcvd = 0; |
| volatile ucchar status; |
| |
| ptdescr = (card->hw.rambase + |
| RX_BD_ADDR(ch, chan->rx_first_bd)); |
| while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { |
| nchar = cpc_readw(&ptdescr->len); |
| if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) |
| || (nchar > BD_DEF_LEN)) { |
| |
| if (nchar > BD_DEF_LEN) |
| status |= DST_RBIT; |
| rcvd = -status; |
| /* Discard remaining descriptors used by the bad frame */ |
| while (chan->rx_first_bd != chan->rx_last_bd) { |
| cpc_writeb(&ptdescr->status, 0); |
| chan->rx_first_bd = (chan->rx_first_bd+1) & (N_DMA_RX_BUF-1); |
| if (status & DST_EOM) |
| break; |
| ptdescr = (card->hw.rambase + |
| cpc_readl(&ptdescr->next)); |
| status = cpc_readb(&ptdescr->status); |
| } |
| break; |
| } |
| if (nchar != 0) { |
| if (skb) { |
| memcpy_fromio(skb_put(skb, nchar), |
| (card->hw.rambase+cpc_readl(&ptdescr->ptbuf)),nchar); |
| } |
| rcvd += nchar; |
| } |
| cpc_writeb(&ptdescr->status, 0); |
| cpc_writeb(&ptdescr->len, 0); |
| chan->rx_first_bd = (chan->rx_first_bd + 1) & (N_DMA_RX_BUF - 1); |
| |
| if (status & DST_EOM) |
| break; |
| |
| ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); |
| } |
| |
| if (rcvd != 0) { |
| /* Update pointer */ |
| chan->rx_last_bd = (chan->rx_first_bd - 1) & (N_DMA_RX_BUF - 1); |
| /* Update EDA */ |
| cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), |
| RX_BD_ADDR(ch, chan->rx_last_bd)); |
| } |
| return (rcvd); |
| } |
| |
| static void tx_dma_stop(pc300_t * card, int ch) |
| { |
| void __iomem *scabase = card->hw.scabase; |
| ucchar drr_ena_bit = 1 << (5 + 2 * ch); |
| ucchar drr_rst_bit = 1 << (1 + 2 * ch); |
| |
| /* Disable DMA */ |
| cpc_writeb(scabase + DRR, drr_ena_bit); |
| cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); |
| } |
| |
| static void rx_dma_stop(pc300_t * card, int ch) |
| { |
| void __iomem *scabase = card->hw.scabase; |
| ucchar drr_ena_bit = 1 << (4 + 2 * ch); |
| ucchar drr_rst_bit = 1 << (2 * ch); |
| |
| /* Disable DMA */ |
| cpc_writeb(scabase + DRR, drr_ena_bit); |
| cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); |
| } |
| |
| static void rx_dma_start(pc300_t * card, int ch) |
| { |
| void __iomem *scabase = card->hw.scabase; |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| |
| /* Start DMA */ |
| cpc_writel(scabase + DRX_REG(CDAL, ch), |
| RX_BD_ADDR(ch, chan->rx_first_bd)); |
| if (cpc_readl(scabase + DRX_REG(CDAL,ch)) != |
| RX_BD_ADDR(ch, chan->rx_first_bd)) { |
| cpc_writel(scabase + DRX_REG(CDAL, ch), |
| RX_BD_ADDR(ch, chan->rx_first_bd)); |
| } |
| cpc_writel(scabase + DRX_REG(EDAL, ch), |
| RX_BD_ADDR(ch, chan->rx_last_bd)); |
| cpc_writew(scabase + DRX_REG(BFLL, ch), BD_DEF_LEN); |
| cpc_writeb(scabase + DSR_RX(ch), DSR_DE); |
| if (!(cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { |
| cpc_writeb(scabase + DSR_RX(ch), DSR_DE); |
| } |
| } |
| |
| /*************************/ |
| /*** FALC Routines ***/ |
| /*************************/ |
| static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) |
| { |
| void __iomem *falcbase = card->hw.falcbase; |
| unsigned long i = 0; |
| |
| while (cpc_readb(falcbase + F_REG(SIS, ch)) & SIS_CEC) { |
| if (i++ >= PC300_FALC_MAXLOOP) { |
| printk("%s: FALC command locked(cmd=0x%x).\n", |
| card->chan[ch].d.name, cmd); |
| break; |
| } |
| } |
| cpc_writeb(falcbase + F_REG(CMDR, ch), cmd); |
| } |
| |
| static void falc_intr_enable(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| /* Interrupt pins are open-drain */ |
| cpc_writeb(falcbase + F_REG(IPC, ch), |
| cpc_readb(falcbase + F_REG(IPC, ch)) & ~IPC_IC0); |
| /* Conters updated each second */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_ECM); |
| /* Enable SEC and ES interrupts */ |
| cpc_writeb(falcbase + F_REG(IMR3, ch), |
| cpc_readb(falcbase + F_REG(IMR3, ch)) & ~(IMR3_SEC | IMR3_ES)); |
| if (conf->fr_mode == PC300_FR_UNFRAMED) { |
| cpc_writeb(falcbase + F_REG(IMR4, ch), |
| cpc_readb(falcbase + F_REG(IMR4, ch)) & ~(IMR4_LOS)); |
| } else { |
| cpc_writeb(falcbase + F_REG(IMR4, ch), |
| cpc_readb(falcbase + F_REG(IMR4, ch)) & |
| ~(IMR4_LFA | IMR4_AIS | IMR4_LOS | IMR4_SLIP)); |
| } |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(IMR3, ch), |
| cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); |
| } else { |
| cpc_writeb(falcbase + F_REG(IPC, ch), |
| cpc_readb(falcbase + F_REG(IPC, ch)) | IPC_SCI); |
| if (conf->fr_mode == PC300_FR_UNFRAMED) { |
| cpc_writeb(falcbase + F_REG(IMR2, ch), |
| cpc_readb(falcbase + F_REG(IMR2, ch)) & ~(IMR2_LOS)); |
| } else { |
| cpc_writeb(falcbase + F_REG(IMR2, ch), |
| cpc_readb(falcbase + F_REG(IMR2, ch)) & |
| ~(IMR2_FAR | IMR2_LFA | IMR2_AIS | IMR2_LOS)); |
| if (pfalc->multiframe_mode) { |
| cpc_writeb(falcbase + F_REG(IMR2, ch), |
| cpc_readb(falcbase + F_REG(IMR2, ch)) & |
| ~(IMR2_T400MS | IMR2_MFAR)); |
| } else { |
| cpc_writeb(falcbase + F_REG(IMR2, ch), |
| cpc_readb(falcbase + F_REG(IMR2, ch)) | |
| IMR2_T400MS | IMR2_MFAR); |
| } |
| } |
| } |
| } |
| |
| static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) |
| { |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar tshf = card->chan[ch].falc.offset; |
| |
| cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), |
| cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & |
| ~(0x80 >> ((timeslot - tshf) & 0x07))); |
| cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), |
| cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) | |
| (0x80 >> (timeslot & 0x07))); |
| cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), |
| cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) | |
| (0x80 >> (timeslot & 0x07))); |
| } |
| |
| static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) |
| { |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar tshf = card->chan[ch].falc.offset; |
| |
| cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), |
| cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | |
| (0x80 >> ((timeslot - tshf) & 0x07))); |
| cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), |
| cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) & |
| ~(0x80 >> (timeslot & 0x07))); |
| cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), |
| cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) & |
| ~(0x80 >> (timeslot & 0x07))); |
| } |
| |
| static void falc_close_all_timeslots(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| cpc_writeb(falcbase + F_REG(ICB1, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(TTR1, ch), 0); |
| cpc_writeb(falcbase + F_REG(RTR1, ch), 0); |
| cpc_writeb(falcbase + F_REG(ICB2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(TTR2, ch), 0); |
| cpc_writeb(falcbase + F_REG(RTR2, ch), 0); |
| cpc_writeb(falcbase + F_REG(ICB3, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(TTR3, ch), 0); |
| cpc_writeb(falcbase + F_REG(RTR3, ch), 0); |
| if (conf->media == IF_IFACE_E1) { |
| cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(TTR4, ch), 0); |
| cpc_writeb(falcbase + F_REG(RTR4, ch), 0); |
| } |
| } |
| |
| static void falc_open_all_timeslots(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| cpc_writeb(falcbase + F_REG(ICB1, ch), 0); |
| if (conf->fr_mode == PC300_FR_UNFRAMED) { |
| cpc_writeb(falcbase + F_REG(TTR1, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RTR1, ch), 0xff); |
| } else { |
| /* Timeslot 0 is never enabled */ |
| cpc_writeb(falcbase + F_REG(TTR1, ch), 0x7f); |
| cpc_writeb(falcbase + F_REG(RTR1, ch), 0x7f); |
| } |
| cpc_writeb(falcbase + F_REG(ICB2, ch), 0); |
| cpc_writeb(falcbase + F_REG(TTR2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RTR2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(ICB3, ch), 0); |
| cpc_writeb(falcbase + F_REG(TTR3, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RTR3, ch), 0xff); |
| if (conf->media == IF_IFACE_E1) { |
| cpc_writeb(falcbase + F_REG(ICB4, ch), 0); |
| cpc_writeb(falcbase + F_REG(TTR4, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RTR4, ch), 0xff); |
| } else { |
| cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(TTR4, ch), 0x80); |
| cpc_writeb(falcbase + F_REG(RTR4, ch), 0x80); |
| } |
| } |
| |
| static void falc_init_timeslot(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| int tslot; |
| |
| for (tslot = 0; tslot < pfalc->num_channels; tslot++) { |
| if (conf->tslot_bitmap & (1 << tslot)) { |
| // Channel enabled |
| falc_open_timeslot(card, ch, tslot + 1); |
| } else { |
| // Channel disabled |
| falc_close_timeslot(card, ch, tslot + 1); |
| } |
| } |
| } |
| |
| static void falc_enable_comm(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| |
| if (pfalc->full_bandwidth) { |
| falc_open_all_timeslots(card, ch); |
| } else { |
| falc_init_timeslot(card, ch); |
| } |
| // CTS/DCD ON |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & |
| ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); |
| } |
| |
| static void falc_disable_comm(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| |
| if (pfalc->loop_active != 2) { |
| falc_close_all_timeslots(card, ch); |
| } |
| // CTS/DCD OFF |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | |
| ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); |
| } |
| |
| static void falc_init_t1(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); |
| |
| /* Switch to T1 mode (PCM 24) */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD); |
| |
| /* Wait 20 us for setup */ |
| udelay(20); |
| |
| /* Transmit Buffer Size (1 frame) */ |
| cpc_writeb(falcbase + F_REG(SIC1, ch), SIC1_XBS0); |
| |
| /* Clock mode */ |
| if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); |
| } else { /* Slave mode */ |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); |
| cpc_writeb(falcbase + F_REG(LOOP, ch), |
| cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_RTM); |
| } |
| |
| cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) & |
| ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); |
| |
| switch (conf->lcode) { |
| case PC300_LC_AMI: |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | |
| FMR0_XC1 | FMR0_RC1); |
| /* Clear Channel register to ON for all channels */ |
| cpc_writeb(falcbase + F_REG(CCB1, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(CCB2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(CCB3, ch), 0xff); |
| break; |
| |
| case PC300_LC_B8ZS: |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | |
| FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); |
| break; |
| |
| case PC300_LC_NRZ: |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | 0x00); |
| break; |
| } |
| |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_ELOS); |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); |
| /* Set interface mode to 2 MBPS */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); |
| |
| switch (conf->fr_mode) { |
| case PC300_FR_ESF: |
| pfalc->multiframe_mode = 0; |
| cpc_writeb(falcbase + F_REG(FMR4, ch), |
| cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_FM1); |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | |
| FMR1_CRC | FMR1_EDL); |
| cpc_writeb(falcbase + F_REG(XDL1, ch), 0); |
| cpc_writeb(falcbase + F_REG(XDL2, ch), 0); |
| cpc_writeb(falcbase + F_REG(XDL3, ch), 0); |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) & ~FMR0_SRAF); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2,ch)) | FMR2_MCSP | FMR2_SSP); |
| break; |
| |
| case PC300_FR_D4: |
| pfalc->multiframe_mode = 1; |
| cpc_writeb(falcbase + F_REG(FMR4, ch), |
| cpc_readb(falcbase + F_REG(FMR4, ch)) & |
| ~(FMR4_FM1 | FMR4_FM0)); |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | FMR0_SRAF); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_SSP); |
| break; |
| } |
| |
| /* Enable Automatic Resynchronization */ |
| cpc_writeb(falcbase + F_REG(FMR4, ch), |
| cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_AUTO); |
| |
| /* Transmit Automatic Remote Alarm */ |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); |
| |
| /* Channel translation mode 1 : one to one */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_CTM); |
| |
| /* No signaling */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_SIGM); |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) & |
| ~(FMR5_EIBR | FMR5_SRS)); |
| cpc_writeb(falcbase + F_REG(CCR1, ch), 0); |
| |
| cpc_writeb(falcbase + F_REG(LIM1, ch), |
| cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); |
| |
| switch (conf->lbo) { |
| /* Provides proper Line Build Out */ |
| case PC300_LBO_0_DB: |
| cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); |
| cpc_writeb(falcbase + F_REG(XPM0, ch), 0x5a); |
| cpc_writeb(falcbase + F_REG(XPM1, ch), 0x8f); |
| cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); |
| break; |
| case PC300_LBO_7_5_DB: |
| cpc_writeb(falcbase + F_REG(LIM2, ch), (0x40 | LIM2_LOS1 | dja)); |
| cpc_writeb(falcbase + F_REG(XPM0, ch), 0x11); |
| cpc_writeb(falcbase + F_REG(XPM1, ch), 0x02); |
| cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); |
| break; |
| case PC300_LBO_15_DB: |
| cpc_writeb(falcbase + F_REG(LIM2, ch), (0x80 | LIM2_LOS1 | dja)); |
| cpc_writeb(falcbase + F_REG(XPM0, ch), 0x8e); |
| cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); |
| cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); |
| break; |
| case PC300_LBO_22_5_DB: |
| cpc_writeb(falcbase + F_REG(LIM2, ch), (0xc0 | LIM2_LOS1 | dja)); |
| cpc_writeb(falcbase + F_REG(XPM0, ch), 0x09); |
| cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); |
| cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); |
| break; |
| } |
| |
| /* Transmit Clock-Slot Offset */ |
| cpc_writeb(falcbase + F_REG(XC0, ch), |
| cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); |
| /* Transmit Time-slot Offset */ |
| cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); |
| /* Receive Clock-Slot offset */ |
| cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); |
| /* Receive Time-slot offset */ |
| cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); |
| |
| /* LOS Detection after 176 consecutive 0s */ |
| cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); |
| /* LOS Recovery after 22 ones in the time window of PCD */ |
| cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); |
| |
| cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); |
| |
| if (conf->fr_mode == PC300_FR_ESF_JAPAN) { |
| cpc_writeb(falcbase + F_REG(RC1, ch), |
| cpc_readb(falcbase + F_REG(RC1, ch)) | 0x80); |
| } |
| |
| falc_close_all_timeslots(card, ch); |
| } |
| |
| static void falc_init_e1(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); |
| |
| /* Switch to E1 mode (PCM 30) */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_PMOD); |
| |
| /* Clock mode */ |
| if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); |
| } else { /* Slave mode */ |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); |
| } |
| cpc_writeb(falcbase + F_REG(LOOP, ch), |
| cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_SFM); |
| |
| cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) & |
| ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); |
| |
| switch (conf->lcode) { |
| case PC300_LC_AMI: |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | |
| FMR0_XC1 | FMR0_RC1); |
| break; |
| |
| case PC300_LC_HDB3: |
| cpc_writeb(falcbase + F_REG(FMR0, ch), |
| cpc_readb(falcbase + F_REG(FMR0, ch)) | |
| FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); |
| break; |
| |
| case PC300_LC_NRZ: |
| break; |
| } |
| |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); |
| /* Set interface mode to 2 MBPS */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); |
| |
| cpc_writeb(falcbase + F_REG(XPM0, ch), 0x18); |
| cpc_writeb(falcbase + F_REG(XPM1, ch), 0x03); |
| cpc_writeb(falcbase + F_REG(XPM2, ch), 0x00); |
| |
| switch (conf->fr_mode) { |
| case PC300_FR_MF_CRC4: |
| pfalc->multiframe_mode = 1; |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_XFS); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_RFS1); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_RFS0); |
| cpc_writeb(falcbase + F_REG(FMR3, ch), |
| cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_EXTIW); |
| |
| /* MultiFrame Resynchronization */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_MFCS); |
| |
| /* Automatic Loss of Multiframe > 914 CRC errors */ |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_ALMF); |
| |
| /* S1 and SI1/SI2 spare Bits set to 1 */ |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_AXS); |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_EBP); |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XS13 | XSP_XS15); |
| |
| /* Automatic Force Resynchronization */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); |
| |
| /* Transmit Automatic Remote Alarm */ |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); |
| |
| /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) | |
| XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); |
| break; |
| |
| case PC300_FR_MF_NON_CRC4: |
| case PC300_FR_D4: |
| pfalc->multiframe_mode = 0; |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & |
| ~(FMR2_RFS1 | FMR2_RFS0)); |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XSIS); |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XSIF); |
| |
| /* Automatic Force Resynchronization */ |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); |
| |
| /* Transmit Automatic Remote Alarm */ |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); |
| |
| /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) | |
| XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); |
| break; |
| |
| case PC300_FR_UNFRAMED: |
| pfalc->multiframe_mode = 0; |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & |
| ~(FMR2_RFS1 | FMR2_RFS0)); |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_TT0); |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) & |
| ~(XSW_XTM|XSW_XY0|XSW_XY1|XSW_XY2|XSW_XY3|XSW_XY4)); |
| cpc_writeb(falcbase + F_REG(TSWM, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | |
| (FMR2_RTM | FMR2_DAIS)); |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_AXRA); |
| cpc_writeb(falcbase + F_REG(FMR1, ch), |
| cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_AFR); |
| pfalc->sync = 1; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) | |
| (CPLD_REG2_FALC_LED2 << (2 * ch))); |
| break; |
| } |
| |
| /* No signaling */ |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_CASEN); |
| cpc_writeb(falcbase + F_REG(CCR1, ch), 0); |
| |
| cpc_writeb(falcbase + F_REG(LIM1, ch), |
| cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); |
| cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); |
| |
| /* Transmit Clock-Slot Offset */ |
| cpc_writeb(falcbase + F_REG(XC0, ch), |
| cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); |
| /* Transmit Time-slot Offset */ |
| cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); |
| /* Receive Clock-Slot offset */ |
| cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); |
| /* Receive Time-slot offset */ |
| cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); |
| |
| /* LOS Detection after 176 consecutive 0s */ |
| cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); |
| /* LOS Recovery after 22 ones in the time window of PCD */ |
| cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); |
| |
| cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); |
| |
| falc_close_all_timeslots(card, ch); |
| } |
| |
| static void falc_init_hdlc(pc300_t * card, int ch) |
| { |
| void __iomem *falcbase = card->hw.falcbase; |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| |
| /* Enable transparent data transfer */ |
| if (conf->fr_mode == PC300_FR_UNFRAMED) { |
| cpc_writeb(falcbase + F_REG(MODE, ch), 0); |
| } else { |
| cpc_writeb(falcbase + F_REG(MODE, ch), |
| cpc_readb(falcbase + F_REG(MODE, ch)) | |
| (MODE_HRAC | MODE_MDS2)); |
| cpc_writeb(falcbase + F_REG(RAH2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RAH1, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RAL2, ch), 0xff); |
| cpc_writeb(falcbase + F_REG(RAL1, ch), 0xff); |
| } |
| |
| /* Tx/Rx reset */ |
| falc_issue_cmd(card, ch, CMDR_RRES | CMDR_XRES | CMDR_SRES); |
| |
| /* Enable interrupt sources */ |
| falc_intr_enable(card, ch); |
| } |
| |
| static void te_config(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar dummy; |
| unsigned long flags; |
| |
| memset(pfalc, 0, sizeof(falc_t)); |
| switch (conf->media) { |
| case IF_IFACE_T1: |
| pfalc->num_channels = NUM_OF_T1_CHANNELS; |
| pfalc->offset = 1; |
| break; |
| case IF_IFACE_E1: |
| pfalc->num_channels = NUM_OF_E1_CHANNELS; |
| pfalc->offset = 0; |
| break; |
| } |
| if (conf->tslot_bitmap == 0xffffffffUL) |
| pfalc->full_bandwidth = 1; |
| else |
| pfalc->full_bandwidth = 0; |
| |
| CPC_LOCK(card, flags); |
| /* Reset the FALC chip */ |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | |
| (CPLD_REG1_FALC_RESET << (2 * ch))); |
| udelay(10000); |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & |
| ~(CPLD_REG1_FALC_RESET << (2 * ch))); |
| |
| if (conf->media == IF_IFACE_T1) { |
| falc_init_t1(card, ch); |
| } else { |
| falc_init_e1(card, ch); |
| } |
| falc_init_hdlc(card, ch); |
| if (conf->rx_sens == PC300_RX_SENS_SH) { |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_EQON); |
| } else { |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_EQON); |
| } |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | |
| ((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK) << (2 * ch))); |
| |
| /* Clear all interrupt registers */ |
| dummy = cpc_readb(falcbase + F_REG(FISR0, ch)) + |
| cpc_readb(falcbase + F_REG(FISR1, ch)) + |
| cpc_readb(falcbase + F_REG(FISR2, ch)) + |
| cpc_readb(falcbase + F_REG(FISR3, ch)); |
| CPC_UNLOCK(card, flags); |
| } |
| |
| static void falc_check_status(pc300_t * card, int ch, unsigned char frs0) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| /* Verify LOS */ |
| if (frs0 & FRS0_LOS) { |
| if (!pfalc->red_alarm) { |
| pfalc->red_alarm = 1; |
| pfalc->los++; |
| if (!pfalc->blue_alarm) { |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise interfere |
| * with other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) |
| | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| } |
| } |
| } else { |
| if (pfalc->red_alarm) { |
| pfalc->red_alarm = 0; |
| pfalc->losr++; |
| } |
| } |
| |
| if (conf->fr_mode != PC300_FR_UNFRAMED) { |
| /* Verify AIS alarm */ |
| if (frs0 & FRS0_AIS) { |
| if (!pfalc->blue_alarm) { |
| pfalc->blue_alarm = 1; |
| pfalc->ais++; |
| // EVENT_AIS |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise interfere with other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_AIS |
| } |
| } else { |
| pfalc->blue_alarm = 0; |
| } |
| |
| /* Verify LFA */ |
| if (frs0 & FRS0_LFA) { |
| if (!pfalc->loss_fa) { |
| pfalc->loss_fa = 1; |
| pfalc->lfa++; |
| if (!pfalc->blue_alarm && !pfalc->red_alarm) { |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise |
| * interfere with other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) |
| | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| } |
| } |
| } else { |
| if (pfalc->loss_fa) { |
| pfalc->loss_fa = 0; |
| pfalc->farec++; |
| } |
| } |
| |
| /* Verify LMFA */ |
| if (pfalc->multiframe_mode && (frs0 & FRS0_LMFA)) { |
| /* D4 or CRC4 frame mode */ |
| if (!pfalc->loss_mfa) { |
| pfalc->loss_mfa = 1; |
| pfalc->lmfa++; |
| if (!pfalc->blue_alarm && !pfalc->red_alarm && |
| !pfalc->loss_fa) { |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise |
| * interfere with other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) |
| | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| } |
| } |
| } else { |
| pfalc->loss_mfa = 0; |
| } |
| |
| /* Verify Remote Alarm */ |
| if (frs0 & FRS0_RRA) { |
| if (!pfalc->yellow_alarm) { |
| pfalc->yellow_alarm = 1; |
| pfalc->rai++; |
| if (pfalc->sync) { |
| // EVENT_RAI |
| falc_disable_comm(card, ch); |
| // EVENT_RAI |
| } |
| } |
| } else { |
| pfalc->yellow_alarm = 0; |
| } |
| } /* if !PC300_UNFRAMED */ |
| |
| if (pfalc->red_alarm || pfalc->loss_fa || |
| pfalc->loss_mfa || pfalc->blue_alarm) { |
| if (pfalc->sync) { |
| pfalc->sync = 0; |
| chan->d.line_off++; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED2 << (2 * ch))); |
| } |
| } else { |
| if (!pfalc->sync) { |
| pfalc->sync = 1; |
| chan->d.line_on++; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) | |
| (CPLD_REG2_FALC_LED2 << (2 * ch))); |
| } |
| } |
| |
| if (pfalc->sync && !pfalc->yellow_alarm) { |
| if (!pfalc->active) { |
| // EVENT_FALC_NORMAL |
| if (pfalc->loop_active) { |
| return; |
| } |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) & ~IMR0_PDEN); |
| } |
| falc_enable_comm(card, ch); |
| // EVENT_FALC_NORMAL |
| pfalc->active = 1; |
| } |
| } else { |
| if (pfalc->active) { |
| pfalc->active = 0; |
| } |
| } |
| } |
| |
| static void falc_update_stats(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucshort counter; |
| |
| counter = cpc_readb(falcbase + F_REG(FECL, ch)); |
| counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8; |
| pfalc->fec += counter; |
| |
| counter = cpc_readb(falcbase + F_REG(CVCL, ch)); |
| counter |= cpc_readb(falcbase + F_REG(CVCH, ch)) << 8; |
| pfalc->cvc += counter; |
| |
| counter = cpc_readb(falcbase + F_REG(CECL, ch)); |
| counter |= cpc_readb(falcbase + F_REG(CECH, ch)) << 8; |
| pfalc->cec += counter; |
| |
| counter = cpc_readb(falcbase + F_REG(EBCL, ch)); |
| counter |= cpc_readb(falcbase + F_REG(EBCH, ch)) << 8; |
| pfalc->ebc += counter; |
| |
| if (cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) { |
| mdelay(10); |
| counter = cpc_readb(falcbase + F_REG(BECL, ch)); |
| counter |= cpc_readb(falcbase + F_REG(BECH, ch)) << 8; |
| pfalc->bec += counter; |
| |
| if (((conf->media == IF_IFACE_T1) && |
| (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) && |
| (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN))) |
| || |
| ((conf->media == IF_IFACE_E1) && |
| (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) { |
| pfalc->prbs = 2; |
| } else { |
| pfalc->prbs = 1; |
| } |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_remote_loop |
| *---------------------------------------------------------------------------- |
| * Description: In the remote loopback mode the clock and data recovered |
| * from the line inputs RL1/2 or RDIP/RDIN are routed back |
| * to the line outputs XL1/2 or XDOP/XDON via the analog |
| * transmitter. As in normal mode they are processsed by |
| * the synchronizer and then sent to the system interface. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_remote_loop(pc300_t * card, int ch, int loop_on) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (loop_on) { |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise interfere with |
| * other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| cpc_writeb(falcbase + F_REG(LIM1, ch), |
| cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RL); |
| pfalc->loop_active = 1; |
| } else { |
| cpc_writeb(falcbase + F_REG(LIM1, ch), |
| cpc_readb(falcbase + F_REG(LIM1, ch)) & ~LIM1_RL); |
| pfalc->sync = 0; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED2 << (2 * ch))); |
| pfalc->active = 0; |
| falc_issue_cmd(card, ch, CMDR_XRES); |
| pfalc->loop_active = 0; |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_local_loop |
| *---------------------------------------------------------------------------- |
| * Description: The local loopback mode disconnects the receive lines |
| * RL1/RL2 resp. RDIP/RDIN from the receiver. Instead of the |
| * signals coming from the line the data provided by system |
| * interface are routed through the analog receiver back to |
| * the system interface. The unipolar bit stream will be |
| * undisturbed transmitted on the line. Receiver and transmitter |
| * coding must be identical. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_local_loop(pc300_t * card, int ch, int loop_on) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (loop_on) { |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_LL); |
| pfalc->loop_active = 1; |
| } else { |
| cpc_writeb(falcbase + F_REG(LIM0, ch), |
| cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_LL); |
| pfalc->loop_active = 0; |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_payload_loop |
| *---------------------------------------------------------------------------- |
| * Description: This routine allows to enable/disable payload loopback. |
| * When the payload loop is activated, the received 192 bits |
| * of payload data will be looped back to the transmit |
| * direction. The framing bits, CRC6 and DL bits are not |
| * looped. They are originated by the FALC-LH transmitter. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_payload_loop(pc300_t * card, int ch, int loop_on) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (loop_on) { |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise interfere with |
| * other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_PLB); |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR4, ch), |
| cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_TM); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) | XSP_TT0); |
| } |
| falc_open_all_timeslots(card, ch); |
| pfalc->loop_active = 2; |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR2, ch), |
| cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_PLB); |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR4, ch), |
| cpc_readb(falcbase + F_REG(FMR4, ch)) & ~FMR4_TM); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) & ~XSP_TT0); |
| } |
| pfalc->sync = 0; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED2 << (2 * ch))); |
| pfalc->active = 0; |
| falc_issue_cmd(card, ch, CMDR_XRES); |
| pfalc->loop_active = 0; |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * turn_off_xlu |
| *---------------------------------------------------------------------------- |
| * Description: Turns XLU bit off in the proper register |
| *---------------------------------------------------------------------------- |
| */ |
| static void turn_off_xlu(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLU); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR3, ch), |
| cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLU); |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * turn_off_xld |
| *---------------------------------------------------------------------------- |
| * Description: Turns XLD bit off in the proper register |
| *---------------------------------------------------------------------------- |
| */ |
| static void turn_off_xld(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLD); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR3, ch), |
| cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLD); |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_generate_loop_up_code |
| *---------------------------------------------------------------------------- |
| * Description: This routine writes the proper FALC chip register in order |
| * to generate a LOOP activation code over a T1/E1 line. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_generate_loop_up_code(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLU); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR3, ch), |
| cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLU); |
| } |
| // EVENT_FALC_ABNORMAL |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable this interrupt as it may otherwise interfere with |
| * other working boards. */ |
| cpc_writeb(falcbase + F_REG(IMR0, ch), |
| cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); |
| } |
| falc_disable_comm(card, ch); |
| // EVENT_FALC_ABNORMAL |
| pfalc->loop_gen = 1; |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_generate_loop_down_code |
| *---------------------------------------------------------------------------- |
| * Description: This routine writes the proper FALC chip register in order |
| * to generate a LOOP deactivation code over a T1/E1 line. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_generate_loop_down_code(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (conf->media == IF_IFACE_T1) { |
| cpc_writeb(falcbase + F_REG(FMR5, ch), |
| cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLD); |
| } else { |
| cpc_writeb(falcbase + F_REG(FMR3, ch), |
| cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLD); |
| } |
| pfalc->sync = 0; |
| cpc_writeb(falcbase + card->hw.cpld_reg2, |
| cpc_readb(falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED2 << (2 * ch))); |
| pfalc->active = 0; |
| //? falc_issue_cmd(card, ch, CMDR_XRES); |
| pfalc->loop_gen = 0; |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_pattern_test |
| *---------------------------------------------------------------------------- |
| * Description: This routine generates a pattern code and checks |
| * it on the reception side. |
| *---------------------------------------------------------------------------- |
| */ |
| static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (activate) { |
| pfalc->prbs = 1; |
| pfalc->bec = 0; |
| if (conf->media == IF_IFACE_T1) { |
| /* Disable local loop activation/deactivation detect */ |
| cpc_writeb(falcbase + F_REG(IMR3, ch), |
| cpc_readb(falcbase + F_REG(IMR3, ch)) | IMR3_LLBSC); |
| } else { |
| /* Disable local loop activation/deactivation detect */ |
| cpc_writeb(falcbase + F_REG(IMR1, ch), |
| cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_LLBSC); |
| } |
| /* Activates generation and monitoring of PRBS |
| * (Pseudo Random Bit Sequence) */ |
| cpc_writeb(falcbase + F_REG(LCR1, ch), |
| cpc_readb(falcbase + F_REG(LCR1, ch)) | LCR1_EPRM | LCR1_XPRBS); |
| } else { |
| pfalc->prbs = 0; |
| /* Deactivates generation and monitoring of PRBS |
| * (Pseudo Random Bit Sequence) */ |
| cpc_writeb(falcbase + F_REG(LCR1, ch), |
| cpc_readb(falcbase+F_REG(LCR1,ch)) & ~(LCR1_EPRM | LCR1_XPRBS)); |
| if (conf->media == IF_IFACE_T1) { |
| /* Enable local loop activation/deactivation detect */ |
| cpc_writeb(falcbase + F_REG(IMR3, ch), |
| cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); |
| } else { |
| /* Enable local loop activation/deactivation detect */ |
| cpc_writeb(falcbase + F_REG(IMR1, ch), |
| cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_LLBSC); |
| } |
| } |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * falc_pattern_test_error |
| *---------------------------------------------------------------------------- |
| * Description: This routine returns the bit error counter value |
| *---------------------------------------------------------------------------- |
| */ |
| static ucshort falc_pattern_test_error(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| |
| return (pfalc->bec); |
| } |
| |
| /**********************************/ |
| /*** Net Interface Routines ***/ |
| /**********************************/ |
| |
| static void |
| cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx) |
| { |
| struct sk_buff *skb; |
| |
| if ((skb = dev_alloc_skb(10 + skb_main->len)) == NULL) { |
| printk("%s: out of memory\n", dev->name); |
| return; |
| } |
| skb_put(skb, 10 + skb_main->len); |
| |
| skb->dev = dev; |
| skb->protocol = htons(ETH_P_CUST); |
| skb->mac.raw = skb->data; |
| skb->pkt_type = PACKET_HOST; |
| skb->len = 10 + skb_main->len; |
| |
| memcpy(skb->data, dev->name, 5); |
| skb->data[5] = '['; |
| skb->data[6] = rx_tx; |
| skb->data[7] = ']'; |
| skb->data[8] = ':'; |
| skb->data[9] = ' '; |
| memcpy(&skb->data[10], skb_main->data, skb_main->len); |
| |
| netif_rx(skb); |
| } |
| |
| static void cpc_tx_timeout(struct net_device *dev) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| struct net_device_stats *stats = hdlc_stats(dev); |
| int ch = chan->channel; |
| unsigned long flags; |
| ucchar ilar; |
| |
| stats->tx_errors++; |
| stats->tx_aborted_errors++; |
| CPC_LOCK(card, flags); |
| if ((ilar = cpc_readb(card->hw.scabase + ILAR)) != 0) { |
| printk("%s: ILAR=0x%x\n", dev->name, ilar); |
| cpc_writeb(card->hw.scabase + ILAR, ilar); |
| cpc_writeb(card->hw.scabase + DMER, 0x80); |
| } |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| dev->trans_start = jiffies; |
| CPC_UNLOCK(card, flags); |
| netif_wake_queue(dev); |
| } |
| |
| static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| struct net_device_stats *stats = hdlc_stats(dev); |
| int ch = chan->channel; |
| unsigned long flags; |
| #ifdef PC300_DEBUG_TX |
| int i; |
| #endif |
| |
| if (chan->conf.monitor) { |
| /* In monitor mode no Tx is done: ignore packet */ |
| dev_kfree_skb(skb); |
| return 0; |
| } else if (!netif_carrier_ok(dev)) { |
| /* DCD must be OFF: drop packet */ |
| dev_kfree_skb(skb); |
| stats->tx_errors++; |
| stats->tx_carrier_errors++; |
| return 0; |
| } else if (cpc_readb(card->hw.scabase + M_REG(ST3, ch)) & ST3_DCD) { |
| printk("%s: DCD is OFF. Going administrative down.\n", dev->name); |
| stats->tx_errors++; |
| stats->tx_carrier_errors++; |
| dev_kfree_skb(skb); |
| netif_carrier_off(dev); |
| CPC_LOCK(card, flags); |
| cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & |
| ~(CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| CPC_UNLOCK(card, flags); |
| netif_wake_queue(dev); |
| return 0; |
| } |
| |
| /* Write buffer to DMA buffers */ |
| if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) { |
| // printk("%s: write error. Dropping TX packet.\n", dev->name); |
| netif_stop_queue(dev); |
| dev_kfree_skb(skb); |
| stats->tx_errors++; |
| stats->tx_dropped++; |
| return 0; |
| } |
| #ifdef PC300_DEBUG_TX |
| printk("%s T:", dev->name); |
| for (i = 0; i < skb->len; i++) |
| printk(" %02x", *(skb->data + i)); |
| printk("\n"); |
| #endif |
| |
| if (d->trace_on) { |
| cpc_trace(dev, skb, 'T'); |
| } |
| dev->trans_start = jiffies; |
| |
| /* Start transmission */ |
| CPC_LOCK(card, flags); |
| /* verify if it has more than one free descriptor */ |
| if (card->chan[ch].nfree_tx_bd <= 1) { |
| /* don't have so stop the queue */ |
| netif_stop_queue(dev); |
| } |
| cpc_writel(card->hw.scabase + DTX_REG(EDAL, ch), |
| TX_BD_ADDR(ch, chan->tx_next_bd)); |
| cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); |
| cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | |
| (CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| CPC_UNLOCK(card, flags); |
| dev_kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static void cpc_net_rx(struct net_device *dev) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| struct net_device_stats *stats = hdlc_stats(dev); |
| int ch = chan->channel; |
| #ifdef PC300_DEBUG_RX |
| int i; |
| #endif |
| int rxb; |
| struct sk_buff *skb; |
| |
| while (1) { |
| if ((rxb = dma_get_rx_frame_size(card, ch)) == -1) |
| return; |
| |
| if (!netif_carrier_ok(dev)) { |
| /* DCD must be OFF: drop packet */ |
| printk("%s : DCD is OFF - drop %d rx bytes\n", dev->name, rxb); |
| skb = NULL; |
| } else { |
| if (rxb > (dev->mtu + 40)) { /* add headers */ |
| printk("%s : MTU exceeded %d\n", dev->name, rxb); |
| skb = NULL; |
| } else { |
| skb = dev_alloc_skb(rxb); |
| if (skb == NULL) { |
| printk("%s: Memory squeeze!!\n", dev->name); |
| return; |
| } |
| skb->dev = dev; |
| } |
| } |
| |
| if (((rxb = dma_buf_read(card, ch, skb)) <= 0) || (skb == NULL)) { |
| #ifdef PC300_DEBUG_RX |
| printk("%s: rxb = %x\n", dev->name, rxb); |
| #endif |
| if ((skb == NULL) && (rxb > 0)) { |
| /* rxb > dev->mtu */ |
| stats->rx_errors++; |
| stats->rx_length_errors++; |
| continue; |
| } |
| |
| if (rxb < 0) { /* Invalid frame */ |
| rxb = -rxb; |
| if (rxb & DST_OVR) { |
| stats->rx_errors++; |
| stats->rx_fifo_errors++; |
| } |
| if (rxb & DST_CRC) { |
| stats->rx_errors++; |
| stats->rx_crc_errors++; |
| } |
| if (rxb & (DST_RBIT | DST_SHRT | DST_ABT)) { |
| stats->rx_errors++; |
| stats->rx_frame_errors++; |
| } |
| } |
| if (skb) { |
| dev_kfree_skb_irq(skb); |
| } |
| continue; |
| } |
| |
| stats->rx_bytes += rxb; |
| |
| #ifdef PC300_DEBUG_RX |
| printk("%s R:", dev->name); |
| for (i = 0; i < skb->len; i++) |
| printk(" %02x", *(skb->data + i)); |
| printk("\n"); |
| #endif |
| if (d->trace_on) { |
| cpc_trace(dev, skb, 'R'); |
| } |
| stats->rx_packets++; |
| skb->protocol = hdlc_type_trans(skb, dev); |
| netif_rx(skb); |
| } |
| } |
| |
| /************************************/ |
| /*** PC300 Interrupt Routines ***/ |
| /************************************/ |
| static void sca_tx_intr(pc300dev_t *dev) |
| { |
| pc300ch_t *chan = (pc300ch_t *)dev->chan; |
| pc300_t *card = (pc300_t *)chan->card; |
| int ch = chan->channel; |
| volatile pcsca_bd_t __iomem * ptdescr; |
| struct net_device_stats *stats = hdlc_stats(dev->dev); |
| |
| /* Clean up descriptors from previous transmission */ |
| ptdescr = (card->hw.rambase + |
| TX_BD_ADDR(ch,chan->tx_first_bd)); |
| while ((cpc_readl(card->hw.scabase + DTX_REG(CDAL,ch)) != |
| TX_BD_ADDR(ch,chan->tx_first_bd)) && |
| (cpc_readb(&ptdescr->status) & DST_OSB)) { |
| stats->tx_packets++; |
| stats->tx_bytes += cpc_readw(&ptdescr->len); |
| cpc_writeb(&ptdescr->status, DST_OSB); |
| cpc_writew(&ptdescr->len, 0); |
| chan->nfree_tx_bd++; |
| chan->tx_first_bd = (chan->tx_first_bd + 1) & (N_DMA_TX_BUF - 1); |
| ptdescr = (card->hw.rambase + TX_BD_ADDR(ch,chan->tx_first_bd)); |
| } |
| |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto == PC300_PROTO_MLPPP) { |
| cpc_tty_trigger_poll(dev); |
| } else { |
| #endif |
| /* Tell the upper layer we are ready to transmit more packets */ |
| netif_wake_queue(dev->dev); |
| #ifdef CONFIG_PC300_MLPPP |
| } |
| #endif |
| } |
| |
| static void sca_intr(pc300_t * card) |
| { |
| void __iomem *scabase = card->hw.scabase; |
| volatile uclong status; |
| int ch; |
| int intr_count = 0; |
| unsigned char dsr_rx; |
| |
| while ((status = cpc_readl(scabase + ISR0)) != 0) { |
| for (ch = 0; ch < card->hw.nchan; ch++) { |
| pc300ch_t *chan = &card->chan[ch]; |
| pc300dev_t *d = &chan->d; |
| struct net_device *dev = d->dev; |
| |
| spin_lock(&card->card_lock); |
| |
| /**** Reception ****/ |
| if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) { |
| ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch)); |
| |
| /* Clear RX interrupts */ |
| cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE); |
| |
| #ifdef PC300_DEBUG_INTR |
| printk ("sca_intr: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", |
| ch, status, drx_stat); |
| #endif |
| if (status & IR0_DRX(IR0_DMIA, ch)) { |
| if (drx_stat & DSR_BOF) { |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto == PC300_PROTO_MLPPP) { |
| /* verify if driver is TTY */ |
| if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { |
| rx_dma_stop(card, ch); |
| } |
| cpc_tty_receive(d); |
| rx_dma_start(card, ch); |
| } else |
| #endif |
| { |
| if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { |
| rx_dma_stop(card, ch); |
| } |
| cpc_net_rx(dev); |
| /* Discard invalid frames */ |
| hdlc_stats(dev)->rx_errors++; |
| hdlc_stats(dev)->rx_over_errors++; |
| chan->rx_first_bd = 0; |
| chan->rx_last_bd = N_DMA_RX_BUF - 1; |
| rx_dma_start(card, ch); |
| } |
| } |
| } |
| if (status & IR0_DRX(IR0_DMIB, ch)) { |
| if (drx_stat & DSR_EOM) { |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + |
| card->hw.cpld_reg2, |
| cpc_readb (card->hw.falcbase + |
| card->hw.cpld_reg2) | |
| (CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto == PC300_PROTO_MLPPP) { |
| /* verify if driver is TTY */ |
| cpc_tty_receive(d); |
| } else { |
| cpc_net_rx(dev); |
| } |
| #else |
| cpc_net_rx(dev); |
| #endif |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + |
| card->hw.cpld_reg2, |
| cpc_readb (card->hw.falcbase + |
| card->hw.cpld_reg2) & |
| ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| } |
| } |
| if (!(dsr_rx = cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { |
| #ifdef PC300_DEBUG_INTR |
| printk("%s: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x, dsr2=0x%02x)\n", |
| dev->name, ch, status, drx_stat, dsr_rx); |
| #endif |
| cpc_writeb(scabase + DSR_RX(ch), (dsr_rx | DSR_DE) & 0xfe); |
| } |
| } |
| |
| /**** Transmission ****/ |
| if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) { |
| ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch)); |
| |
| /* Clear TX interrupts */ |
| cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE); |
| |
| #ifdef PC300_DEBUG_INTR |
| printk ("sca_intr: TX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", |
| ch, status, dtx_stat); |
| #endif |
| if (status & IR0_DTX(IR0_EFT, ch)) { |
| if (dtx_stat & DSR_UDRF) { |
| if (cpc_readb (scabase + M_REG(TBN, ch)) != 0) { |
| cpc_writeb(scabase + M_REG(CMD,ch), CMD_TX_BUF_CLR); |
| } |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb (card->hw.falcbase + |
| card->hw.cpld_reg2) & |
| ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| hdlc_stats(dev)->tx_errors++; |
| hdlc_stats(dev)->tx_fifo_errors++; |
| sca_tx_intr(d); |
| } |
| } |
| if (status & IR0_DTX(IR0_DMIA, ch)) { |
| if (dtx_stat & DSR_BOF) { |
| } |
| } |
| if (status & IR0_DTX(IR0_DMIB, ch)) { |
| if (dtx_stat & DSR_EOM) { |
| if (card->hw.type == PC300_TE) { |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb (card->hw.falcbase + |
| card->hw.cpld_reg2) & |
| ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); |
| } |
| sca_tx_intr(d); |
| } |
| } |
| } |
| |
| /**** MSCI ****/ |
| if (status & IR0_M(IR0_RXINTA, ch)) { |
| ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch)); |
| |
| /* Clear MSCI interrupts */ |
| cpc_writeb(scabase + M_REG(ST1, ch), st1); |
| |
| #ifdef PC300_DEBUG_INTR |
| printk("sca_intr: MSCI intr chan[%d] (st=0x%08lx, st1=0x%02x)\n", |
| ch, status, st1); |
| #endif |
| if (st1 & ST1_CDCD) { /* DCD changed */ |
| if (cpc_readb(scabase + M_REG(ST3, ch)) & ST3_DCD) { |
| printk ("%s: DCD is OFF. Going administrative down.\n", |
| dev->name); |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto != PC300_PROTO_MLPPP) { |
| netif_carrier_off(dev); |
| } |
| #else |
| netif_carrier_off(dev); |
| |
| #endif |
| card->chan[ch].d.line_off++; |
| } else { /* DCD = 1 */ |
| printk ("%s: DCD is ON. Going administrative up.\n", |
| dev->name); |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto != PC300_PROTO_MLPPP) |
| /* verify if driver is not TTY */ |
| #endif |
| netif_carrier_on(dev); |
| card->chan[ch].d.line_on++; |
| } |
| } |
| } |
| spin_unlock(&card->card_lock); |
| } |
| if (++intr_count == 10) |
| /* Too much work at this board. Force exit */ |
| break; |
| } |
| } |
| |
| static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && |
| !pfalc->loop_gen) { |
| if (frs1 & FRS1_LLBDD) { |
| // A Line Loop Back Deactivation signal detected |
| if (pfalc->loop_active) { |
| falc_remote_loop(card, ch, 0); |
| } |
| } else { |
| if ((frs1 & FRS1_LLBAD) && |
| ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { |
| // A Line Loop Back Activation signal detected |
| if (!pfalc->loop_active) { |
| falc_remote_loop(card, ch, 1); |
| } |
| } |
| } |
| } |
| } |
| |
| static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| |
| if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && |
| !pfalc->loop_gen) { |
| if (rsp & RSP_LLBDD) { |
| // A Line Loop Back Deactivation signal detected |
| if (pfalc->loop_active) { |
| falc_remote_loop(card, ch, 0); |
| } |
| } else { |
| if ((rsp & RSP_LLBAD) && |
| ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { |
| // A Line Loop Back Activation signal detected |
| if (!pfalc->loop_active) { |
| falc_remote_loop(card, ch, 1); |
| } |
| } |
| } |
| } |
| } |
| |
| static void falc_t1_intr(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar isr0, isr3, gis; |
| ucchar dummy; |
| |
| while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { |
| if (gis & GIS_ISR0) { |
| isr0 = cpc_readb(falcbase + F_REG(FISR0, ch)); |
| if (isr0 & FISR0_PDEN) { |
| /* Read the bit to clear the situation */ |
| if (cpc_readb(falcbase + F_REG(FRS1, ch)) & |
| FRS1_PDEN) { |
| pfalc->pden++; |
| } |
| } |
| } |
| |
| if (gis & GIS_ISR1) { |
| dummy = cpc_readb(falcbase + F_REG(FISR1, ch)); |
| } |
| |
| if (gis & GIS_ISR2) { |
| dummy = cpc_readb(falcbase + F_REG(FISR2, ch)); |
| } |
| |
| if (gis & GIS_ISR3) { |
| isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); |
| if (isr3 & FISR3_SEC) { |
| pfalc->sec++; |
| falc_update_stats(card, ch); |
| falc_check_status(card, ch, |
| cpc_readb(falcbase + F_REG(FRS0, ch))); |
| } |
| if (isr3 & FISR3_ES) { |
| pfalc->es++; |
| } |
| if (isr3 & FISR3_LLBSC) { |
| falc_t1_loop_detection(card, ch, |
| cpc_readb(falcbase + F_REG(FRS1, ch))); |
| } |
| } |
| } |
| } |
| |
| static void falc_e1_intr(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| void __iomem *falcbase = card->hw.falcbase; |
| ucchar isr1, isr2, isr3, gis, rsp; |
| ucchar dummy; |
| |
| while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { |
| rsp = cpc_readb(falcbase + F_REG(RSP, ch)); |
| |
| if (gis & GIS_ISR0) { |
| dummy = cpc_readb(falcbase + F_REG(FISR0, ch)); |
| } |
| if (gis & GIS_ISR1) { |
| isr1 = cpc_readb(falcbase + F_REG(FISR1, ch)); |
| if (isr1 & FISR1_XMB) { |
| if ((pfalc->xmb_cause & 2) |
| && pfalc->multiframe_mode) { |
| if (cpc_readb (falcbase + F_REG(FRS0, ch)) & |
| (FRS0_LOS | FRS0_AIS | FRS0_LFA)) { |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) |
| & ~XSP_AXS); |
| } else { |
| cpc_writeb(falcbase + F_REG(XSP, ch), |
| cpc_readb(falcbase + F_REG(XSP, ch)) |
| | XSP_AXS); |
| } |
| } |
| pfalc->xmb_cause = 0; |
| cpc_writeb(falcbase + F_REG(IMR1, ch), |
| cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_XMB); |
| } |
| if (isr1 & FISR1_LLBSC) { |
| falc_e1_loop_detection(card, ch, rsp); |
| } |
| } |
| if (gis & GIS_ISR2) { |
| isr2 = cpc_readb(falcbase + F_REG(FISR2, ch)); |
| if (isr2 & FISR2_T400MS) { |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XRA); |
| } |
| if (isr2 & FISR2_MFAR) { |
| cpc_writeb(falcbase + F_REG(XSW, ch), |
| cpc_readb(falcbase + F_REG(XSW, ch)) & ~XSW_XRA); |
| } |
| if (isr2 & (FISR2_FAR | FISR2_LFA | FISR2_AIS | FISR2_LOS)) { |
| pfalc->xmb_cause |= 2; |
| cpc_writeb(falcbase + F_REG(IMR1, ch), |
| cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_XMB); |
| } |
| } |
| if (gis & GIS_ISR3) { |
| isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); |
| if (isr3 & FISR3_SEC) { |
| pfalc->sec++; |
| falc_update_stats(card, ch); |
| falc_check_status(card, ch, |
| cpc_readb(falcbase + F_REG(FRS0, ch))); |
| } |
| if (isr3 & FISR3_ES) { |
| pfalc->es++; |
| } |
| } |
| } |
| } |
| |
| static void falc_intr(pc300_t * card) |
| { |
| int ch; |
| |
| for (ch = 0; ch < card->hw.nchan; ch++) { |
| pc300ch_t *chan = &card->chan[ch]; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| |
| if (conf->media == IF_IFACE_T1) { |
| falc_t1_intr(card, ch); |
| } else { |
| falc_e1_intr(card, ch); |
| } |
| } |
| } |
| |
| static irqreturn_t cpc_intr(int irq, void *dev_id) |
| { |
| pc300_t *card; |
| volatile ucchar plx_status; |
| |
| if ((card = (pc300_t *) dev_id) == 0) { |
| #ifdef PC300_DEBUG_INTR |
| printk("cpc_intr: spurious intr %d\n", irq); |
| #endif |
| return IRQ_NONE; /* spurious intr */ |
| } |
| |
| if (card->hw.rambase == 0) { |
| #ifdef PC300_DEBUG_INTR |
| printk("cpc_intr: spurious intr2 %d\n", irq); |
| #endif |
| return IRQ_NONE; /* spurious intr */ |
| } |
| |
| switch (card->hw.type) { |
| case PC300_RSV: |
| case PC300_X21: |
| sca_intr(card); |
| break; |
| |
| case PC300_TE: |
| while ( (plx_status = (cpc_readb(card->hw.plxbase + card->hw.intctl_reg) & |
| (PLX_9050_LINT1_STATUS | PLX_9050_LINT2_STATUS))) != 0) { |
| if (plx_status & PLX_9050_LINT1_STATUS) { /* SCA Interrupt */ |
| sca_intr(card); |
| } |
| if (plx_status & PLX_9050_LINT2_STATUS) { /* FALC Interrupt */ |
| falc_intr(card); |
| } |
| } |
| break; |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static void cpc_sca_status(pc300_t * card, int ch) |
| { |
| ucchar ilar; |
| void __iomem *scabase = card->hw.scabase; |
| unsigned long flags; |
| |
| tx_dma_buf_check(card, ch); |
| rx_dma_buf_check(card, ch); |
| ilar = cpc_readb(scabase + ILAR); |
| printk ("ILAR=0x%02x, WCRL=0x%02x, PCR=0x%02x, BTCR=0x%02x, BOLR=0x%02x\n", |
| ilar, cpc_readb(scabase + WCRL), cpc_readb(scabase + PCR), |
| cpc_readb(scabase + BTCR), cpc_readb(scabase + BOLR)); |
| printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", |
| cpc_readl(scabase + DTX_REG(CDAL, ch)), |
| cpc_readl(scabase + DTX_REG(EDAL, ch))); |
| printk("RX_CDA=0x%08x, RX_EDA=0x%08x, BFL=0x%04x\n", |
| cpc_readl(scabase + DRX_REG(CDAL, ch)), |
| cpc_readl(scabase + DRX_REG(EDAL, ch)), |
| cpc_readw(scabase + DRX_REG(BFLL, ch))); |
| printk("DMER=0x%02x, DSR_TX=0x%02x, DSR_RX=0x%02x\n", |
| cpc_readb(scabase + DMER), cpc_readb(scabase + DSR_TX(ch)), |
| cpc_readb(scabase + DSR_RX(ch))); |
| printk("DMR_TX=0x%02x, DMR_RX=0x%02x, DIR_TX=0x%02x, DIR_RX=0x%02x\n", |
| cpc_readb(scabase + DMR_TX(ch)), cpc_readb(scabase + DMR_RX(ch)), |
| cpc_readb(scabase + DIR_TX(ch)), |
| cpc_readb(scabase + DIR_RX(ch))); |
| printk("DCR_TX=0x%02x, DCR_RX=0x%02x, FCT_TX=0x%02x, FCT_RX=0x%02x\n", |
| cpc_readb(scabase + DCR_TX(ch)), cpc_readb(scabase + DCR_RX(ch)), |
| cpc_readb(scabase + FCT_TX(ch)), |
| cpc_readb(scabase + FCT_RX(ch))); |
| printk("MD0=0x%02x, MD1=0x%02x, MD2=0x%02x, MD3=0x%02x, IDL=0x%02x\n", |
| cpc_readb(scabase + M_REG(MD0, ch)), |
| cpc_readb(scabase + M_REG(MD1, ch)), |
| cpc_readb(scabase + M_REG(MD2, ch)), |
| cpc_readb(scabase + M_REG(MD3, ch)), |
| cpc_readb(scabase + M_REG(IDL, ch))); |
| printk("CMD=0x%02x, SA0=0x%02x, SA1=0x%02x, TFN=0x%02x, CTL=0x%02x\n", |
| cpc_readb(scabase + M_REG(CMD, ch)), |
| cpc_readb(scabase + M_REG(SA0, ch)), |
| cpc_readb(scabase + M_REG(SA1, ch)), |
| cpc_readb(scabase + M_REG(TFN, ch)), |
| cpc_readb(scabase + M_REG(CTL, ch))); |
| printk("ST0=0x%02x, ST1=0x%02x, ST2=0x%02x, ST3=0x%02x, ST4=0x%02x\n", |
| cpc_readb(scabase + M_REG(ST0, ch)), |
| cpc_readb(scabase + M_REG(ST1, ch)), |
| cpc_readb(scabase + M_REG(ST2, ch)), |
| cpc_readb(scabase + M_REG(ST3, ch)), |
| cpc_readb(scabase + M_REG(ST4, ch))); |
| printk ("CST0=0x%02x, CST1=0x%02x, CST2=0x%02x, CST3=0x%02x, FST=0x%02x\n", |
| cpc_readb(scabase + M_REG(CST0, ch)), |
| cpc_readb(scabase + M_REG(CST1, ch)), |
| cpc_readb(scabase + M_REG(CST2, ch)), |
| cpc_readb(scabase + M_REG(CST3, ch)), |
| cpc_readb(scabase + M_REG(FST, ch))); |
| printk("TRC0=0x%02x, TRC1=0x%02x, RRC=0x%02x, TBN=0x%02x, RBN=0x%02x\n", |
| cpc_readb(scabase + M_REG(TRC0, ch)), |
| cpc_readb(scabase + M_REG(TRC1, ch)), |
| cpc_readb(scabase + M_REG(RRC, ch)), |
| cpc_readb(scabase + M_REG(TBN, ch)), |
| cpc_readb(scabase + M_REG(RBN, ch))); |
| printk("TFS=0x%02x, TNR0=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", |
| cpc_readb(scabase + M_REG(TFS, ch)), |
| cpc_readb(scabase + M_REG(TNR0, ch)), |
| cpc_readb(scabase + M_REG(TNR1, ch)), |
| cpc_readb(scabase + M_REG(RNR, ch))); |
| printk("TCR=0x%02x, RCR=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", |
| cpc_readb(scabase + M_REG(TCR, ch)), |
| cpc_readb(scabase + M_REG(RCR, ch)), |
| cpc_readb(scabase + M_REG(TNR1, ch)), |
| cpc_readb(scabase + M_REG(RNR, ch))); |
| printk("TXS=0x%02x, RXS=0x%02x, EXS=0x%02x, TMCT=0x%02x, TMCR=0x%02x\n", |
| cpc_readb(scabase + M_REG(TXS, ch)), |
| cpc_readb(scabase + M_REG(RXS, ch)), |
| cpc_readb(scabase + M_REG(EXS, ch)), |
| cpc_readb(scabase + M_REG(TMCT, ch)), |
| cpc_readb(scabase + M_REG(TMCR, ch))); |
| printk("IE0=0x%02x, IE1=0x%02x, IE2=0x%02x, IE4=0x%02x, FIE=0x%02x\n", |
| cpc_readb(scabase + M_REG(IE0, ch)), |
| cpc_readb(scabase + M_REG(IE1, ch)), |
| cpc_readb(scabase + M_REG(IE2, ch)), |
| cpc_readb(scabase + M_REG(IE4, ch)), |
| cpc_readb(scabase + M_REG(FIE, ch))); |
| printk("IER0=0x%08x\n", cpc_readl(scabase + IER0)); |
| |
| if (ilar != 0) { |
| CPC_LOCK(card, flags); |
| cpc_writeb(scabase + ILAR, ilar); |
| cpc_writeb(scabase + DMER, 0x80); |
| CPC_UNLOCK(card, flags); |
| } |
| } |
| |
| static void cpc_falc_status(pc300_t * card, int ch) |
| { |
| pc300ch_t *chan = &card->chan[ch]; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| unsigned long flags; |
| |
| CPC_LOCK(card, flags); |
| printk("CH%d: %s %s %d channels\n", |
| ch, (pfalc->sync ? "SYNC" : ""), (pfalc->active ? "ACTIVE" : ""), |
| pfalc->num_channels); |
| |
| printk(" pden=%d, los=%d, losr=%d, lfa=%d, farec=%d\n", |
| pfalc->pden, pfalc->los, pfalc->losr, pfalc->lfa, pfalc->farec); |
| printk(" lmfa=%d, ais=%d, sec=%d, es=%d, rai=%d\n", |
| pfalc->lmfa, pfalc->ais, pfalc->sec, pfalc->es, pfalc->rai); |
| printk(" bec=%d, fec=%d, cvc=%d, cec=%d, ebc=%d\n", |
| pfalc->bec, pfalc->fec, pfalc->cvc, pfalc->cec, pfalc->ebc); |
| |
| printk("\n"); |
| printk(" STATUS: %s %s %s %s %s %s\n", |
| (pfalc->red_alarm ? "RED" : ""), |
| (pfalc->blue_alarm ? "BLU" : ""), |
| (pfalc->yellow_alarm ? "YEL" : ""), |
| (pfalc->loss_fa ? "LFA" : ""), |
| (pfalc->loss_mfa ? "LMF" : ""), (pfalc->prbs ? "PRB" : "")); |
| CPC_UNLOCK(card, flags); |
| } |
| |
| static int cpc_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU)) |
| return -EINVAL; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| pc300conf_t conf_aux; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| int ch = chan->channel; |
| void __user *arg = ifr->ifr_data; |
| struct if_settings *settings = &ifr->ifr_settings; |
| void __iomem *scabase = card->hw.scabase; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| switch (cmd) { |
| case SIOCGPC300CONF: |
| #ifdef CONFIG_PC300_MLPPP |
| if (conf->proto != PC300_PROTO_MLPPP) { |
| conf->proto = /* FIXME hdlc->proto.id */ 0; |
| } |
| #else |
| conf->proto = /* FIXME hdlc->proto.id */ 0; |
| #endif |
| memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t)); |
| memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t)); |
| if (!arg || |
| copy_to_user(arg, &conf_aux, sizeof(pc300conf_t))) |
| return -EINVAL; |
| return 0; |
| case SIOCSPC300CONF: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (!arg || |
| copy_from_user(&conf_aux.conf, arg, sizeof(pc300chconf_t))) |
| return -EINVAL; |
| if (card->hw.cpld_id < 0x02 && |
| conf_aux.conf.fr_mode == PC300_FR_UNFRAMED) { |
| /* CPLD_ID < 0x02 doesn't support Unframed E1 */ |
| return -EINVAL; |
| } |
| #ifdef CONFIG_PC300_MLPPP |
| if (conf_aux.conf.proto == PC300_PROTO_MLPPP) { |
| if (conf->proto != PC300_PROTO_MLPPP) { |
| memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); |
| cpc_tty_init(d); /* init TTY driver */ |
| } |
| } else { |
| if (conf_aux.conf.proto == 0xffff) { |
| if (conf->proto == PC300_PROTO_MLPPP){ |
| /* ifdown interface */ |
| cpc_close(dev); |
| } |
| } else { |
| memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); |
| /* FIXME hdlc->proto.id = conf->proto; */ |
| } |
| } |
| #else |
| memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); |
| /* FIXME hdlc->proto.id = conf->proto; */ |
| #endif |
| return 0; |
| case SIOCGPC300STATUS: |
| cpc_sca_status(card, ch); |
| return 0; |
| case SIOCGPC300FALCSTATUS: |
| cpc_falc_status(card, ch); |
| return 0; |
| |
| case SIOCGPC300UTILSTATS: |
| { |
| if (!arg) { /* clear statistics */ |
| memset(hdlc_stats(dev), 0, sizeof(struct net_device_stats)); |
| if (card->hw.type == PC300_TE) { |
| memset(&chan->falc, 0, sizeof(falc_t)); |
| } |
| } else { |
| pc300stats_t pc300stats; |
| |
| memset(&pc300stats, 0, sizeof(pc300stats_t)); |
| pc300stats.hw_type = card->hw.type; |
| pc300stats.line_on = card->chan[ch].d.line_on; |
| pc300stats.line_off = card->chan[ch].d.line_off; |
| memcpy(&pc300stats.gen_stats, hdlc_stats(dev), |
| sizeof(struct net_device_stats)); |
| if (card->hw.type == PC300_TE) |
| memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t)); |
| if (copy_to_user(arg, &pc300stats, sizeof(pc300stats_t))) |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| case SIOCGPC300UTILSTATUS: |
| { |
| struct pc300status pc300status; |
| |
| pc300status.hw_type = card->hw.type; |
| if (card->hw.type == PC300_TE) { |
| pc300status.te_status.sync = chan->falc.sync; |
| pc300status.te_status.red_alarm = chan->falc.red_alarm; |
| pc300status.te_status.blue_alarm = chan->falc.blue_alarm; |
| pc300status.te_status.loss_fa = chan->falc.loss_fa; |
| pc300status.te_status.yellow_alarm =chan->falc.yellow_alarm; |
| pc300status.te_status.loss_mfa = chan->falc.loss_mfa; |
| pc300status.te_status.prbs = chan->falc.prbs; |
| } else { |
| pc300status.gen_status.dcd = |
| !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_DCD); |
| pc300status.gen_status.cts = |
| !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_CTS); |
| pc300status.gen_status.rts = |
| !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_RTS); |
| pc300status.gen_status.dtr = |
| !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR); |
| /* There is no DSR in HD64572 */ |
| } |
| if (!arg |
| || copy_to_user(arg, &pc300status, sizeof(pc300status_t))) |
| return -EINVAL; |
| return 0; |
| } |
| |
| case SIOCSPC300TRACE: |
| /* Sets/resets a trace_flag for the respective device */ |
| if (!arg || copy_from_user(&d->trace_on, arg,sizeof(unsigned char))) |
| return -EINVAL; |
| return 0; |
| |
| case SIOCSPC300LOOPBACK: |
| { |
| struct pc300loopback pc300loop; |
| |
| /* TE boards only */ |
| if (card->hw.type != PC300_TE) |
| return -EINVAL; |
| |
| if (!arg || |
| copy_from_user(&pc300loop, arg, sizeof(pc300loopback_t))) |
| return -EINVAL; |
| switch (pc300loop.loop_type) { |
| case PC300LOCLOOP: /* Turn the local loop on/off */ |
| falc_local_loop(card, ch, pc300loop.loop_on); |
| return 0; |
| |
| case PC300REMLOOP: /* Turn the remote loop on/off */ |
| falc_remote_loop(card, ch, pc300loop.loop_on); |
| return 0; |
| |
| case PC300PAYLOADLOOP: /* Turn the payload loop on/off */ |
| falc_payload_loop(card, ch, pc300loop.loop_on); |
| return 0; |
| |
| case PC300GENLOOPUP: /* Generate loop UP */ |
| if (pc300loop.loop_on) { |
| falc_generate_loop_up_code (card, ch); |
| } else { |
| turn_off_xlu(card, ch); |
| } |
| return 0; |
| |
| case PC300GENLOOPDOWN: /* Generate loop DOWN */ |
| if (pc300loop.loop_on) { |
| falc_generate_loop_down_code (card, ch); |
| } else { |
| turn_off_xld(card, ch); |
| } |
| return 0; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| case SIOCSPC300PATTERNTEST: |
| /* Turn the pattern test on/off and show the errors counter */ |
| { |
| struct pc300patterntst pc300patrntst; |
| |
| /* TE boards only */ |
| if (card->hw.type != PC300_TE) |
| return -EINVAL; |
| |
| if (card->hw.cpld_id < 0x02) { |
| /* CPLD_ID < 0x02 doesn't support pattern test */ |
| return -EINVAL; |
| } |
| |
| if (!arg || |
| copy_from_user(&pc300patrntst,arg,sizeof(pc300patterntst_t))) |
| return -EINVAL; |
| if (pc300patrntst.patrntst_on == 2) { |
| if (chan->falc.prbs == 0) { |
| falc_pattern_test(card, ch, 1); |
| } |
| pc300patrntst.num_errors = |
| falc_pattern_test_error(card, ch); |
| if (!arg |
| || copy_to_user(arg, &pc300patrntst, |
| sizeof (pc300patterntst_t))) |
| return -EINVAL; |
| } else { |
| falc_pattern_test(card, ch, pc300patrntst.patrntst_on); |
| } |
| return 0; |
| } |
| |
| case SIOCWANDEV: |
| switch (ifr->ifr_settings.type) { |
| case IF_GET_IFACE: |
| { |
| const size_t size = sizeof(sync_serial_settings); |
| ifr->ifr_settings.type = conf->media; |
| if (ifr->ifr_settings.size < size) { |
| /* data size wanted */ |
| ifr->ifr_settings.size = size; |
| return -ENOBUFS; |
| } |
| |
| if (copy_to_user(settings->ifs_ifsu.sync, |
| &conf->phys_settings, size)) { |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| case IF_IFACE_V35: |
| case IF_IFACE_V24: |
| case IF_IFACE_X21: |
| { |
| const size_t size = sizeof(sync_serial_settings); |
| |
| if (!capable(CAP_NET_ADMIN)) { |
| return -EPERM; |
| } |
| /* incorrect data len? */ |
| if (ifr->ifr_settings.size != size) { |
| return -ENOBUFS; |
| } |
| |
| if (copy_from_user(&conf->phys_settings, |
| settings->ifs_ifsu.sync, size)) { |
| return -EFAULT; |
| } |
| |
| if (conf->phys_settings.loopback) { |
| cpc_writeb(card->hw.scabase + M_REG(MD2, ch), |
| cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | |
| MD2_LOOP_MIR); |
| } |
| conf->media = ifr->ifr_settings.type; |
| return 0; |
| } |
| |
| case IF_IFACE_T1: |
| case IF_IFACE_E1: |
| { |
| const size_t te_size = sizeof(te1_settings); |
| const size_t size = sizeof(sync_serial_settings); |
| |
| if (!capable(CAP_NET_ADMIN)) { |
| return -EPERM; |
| } |
| |
| /* incorrect data len? */ |
| if (ifr->ifr_settings.size != te_size) { |
| return -ENOBUFS; |
| } |
| |
| if (copy_from_user(&conf->phys_settings, |
| settings->ifs_ifsu.te1, size)) { |
| return -EFAULT; |
| }/* Ignoring HDLC slot_map for a while */ |
| |
| if (conf->phys_settings.loopback) { |
| cpc_writeb(card->hw.scabase + M_REG(MD2, ch), |
| cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | |
| MD2_LOOP_MIR); |
| } |
| conf->media = ifr->ifr_settings.type; |
| return 0; |
| } |
| default: |
| return hdlc_ioctl(dev, ifr, cmd); |
| } |
| |
| default: |
| return hdlc_ioctl(dev, ifr, cmd); |
| } |
| } |
| |
| static struct net_device_stats *cpc_get_stats(struct net_device *dev) |
| { |
| return hdlc_stats(dev); |
| } |
| |
| static int clock_rate_calc(uclong rate, uclong clock, int *br_io) |
| { |
| int br, tc; |
| int br_pwr, error; |
| |
| if (rate == 0) |
| return (0); |
| |
| for (br = 0, br_pwr = 1; br <= 9; br++, br_pwr <<= 1) { |
| if ((tc = clock / br_pwr / rate) <= 0xff) { |
| *br_io = br; |
| break; |
| } |
| } |
| |
| if (tc <= 0xff) { |
| error = ((rate - (clock / br_pwr / rate)) / rate) * 1000; |
| /* Errors bigger than +/- 1% won't be tolerated */ |
| if (error < -10 || error > 10) |
| return (-1); |
| else |
| return (tc); |
| } else { |
| return (-1); |
| } |
| } |
| |
| static int ch_config(pc300dev_t * d) |
| { |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; |
| pc300_t *card = (pc300_t *) chan->card; |
| void __iomem *scabase = card->hw.scabase; |
| void __iomem *plxbase = card->hw.plxbase; |
| int ch = chan->channel; |
| uclong clkrate = chan->conf.phys_settings.clock_rate; |
| uclong clktype = chan->conf.phys_settings.clock_type; |
| ucshort encoding = chan->conf.proto_settings.encoding; |
| ucshort parity = chan->conf.proto_settings.parity; |
| ucchar md0, md2; |
| |
| /* Reset the channel */ |
| cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST); |
| |
| /* Configure the SCA registers */ |
| switch (parity) { |
| case PARITY_NONE: |
| md0 = MD0_BIT_SYNC; |
| break; |
| case PARITY_CRC16_PR0: |
| md0 = MD0_CRC16_0|MD0_CRCC0|MD0_BIT_SYNC; |
| break; |
| case PARITY_CRC16_PR1: |
| md0 = MD0_CRC16_1|MD0_CRCC0|MD0_BIT_SYNC; |
| break; |
| case PARITY_CRC32_PR1_CCITT: |
| md0 = MD0_CRC32|MD0_CRCC0|MD0_BIT_SYNC; |
| break; |
| case PARITY_CRC16_PR1_CCITT: |
| default: |
| md0 = MD0_CRC_CCITT|MD0_CRCC0|MD0_BIT_SYNC; |
| break; |
| } |
| switch (encoding) { |
| case ENCODING_NRZI: |
| md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZI; |
| break; |
| case ENCODING_FM_MARK: /* FM1 */ |
| md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM1; |
| break; |
| case ENCODING_FM_SPACE: /* FM0 */ |
| md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM0; |
| break; |
| case ENCODING_MANCHESTER: /* It's not working... */ |
| md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_MANCH; |
| break; |
| case ENCODING_NRZ: |
| default: |
| md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZ; |
| break; |
| } |
| cpc_writeb(scabase + M_REG(MD0, ch), md0); |
| cpc_writeb(scabase + M_REG(MD1, ch), 0); |
| cpc_writeb(scabase + M_REG(MD2, ch), md2); |
| cpc_writeb(scabase + M_REG(IDL, ch), 0x7e); |
| cpc_writeb(scabase + M_REG(CTL, ch), CTL_URSKP | CTL_IDLC); |
| |
| /* Configure HW media */ |
| switch (card->hw.type) { |
| case PC300_RSV: |
| if (conf->media == IF_IFACE_V35) { |
| cpc_writel((plxbase + card->hw.gpioc_reg), |
| cpc_readl(plxbase + card->hw.gpioc_reg) | PC300_CHMEDIA_MASK(ch)); |
| } else { |
| cpc_writel((plxbase + card->hw.gpioc_reg), |
| cpc_readl(plxbase + card->hw.gpioc_reg) & ~PC300_CHMEDIA_MASK(ch)); |
| } |
| break; |
| |
| case PC300_X21: |
| break; |
| |
| case PC300_TE: |
| te_config(card, ch); |
| break; |
| } |
| |
| switch (card->hw.type) { |
| case PC300_RSV: |
| case PC300_X21: |
| if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) { |
| int tmc, br; |
| |
| /* Calculate the clkrate parameters */ |
| tmc = clock_rate_calc(clkrate, card->hw.clock, &br); |
| if (tmc < 0) |
| return -EIO; |
| cpc_writeb(scabase + M_REG(TMCT, ch), tmc); |
| cpc_writeb(scabase + M_REG(TXS, ch), |
| (TXS_DTRXC | TXS_IBRG | br)); |
| if (clktype == CLOCK_INT) { |
| cpc_writeb(scabase + M_REG(TMCR, ch), tmc); |
| cpc_writeb(scabase + M_REG(RXS, ch), |
| (RXS_IBRG | br)); |
| } else { |
| cpc_writeb(scabase + M_REG(TMCR, ch), 1); |
| cpc_writeb(scabase + M_REG(RXS, ch), 0); |
| } |
| if (card->hw.type == PC300_X21) { |
| cpc_writeb(scabase + M_REG(GPO, ch), 1); |
| cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); |
| } else { |
| cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); |
| } |
| } else { |
| cpc_writeb(scabase + M_REG(TMCT, ch), 1); |
| if (clktype == CLOCK_EXT) { |
| cpc_writeb(scabase + M_REG(TXS, ch), |
| TXS_DTRXC); |
| } else { |
| cpc_writeb(scabase + M_REG(TXS, ch), |
| TXS_DTRXC|TXS_RCLK); |
| } |
| cpc_writeb(scabase + M_REG(TMCR, ch), 1); |
| cpc_writeb(scabase + M_REG(RXS, ch), 0); |
| if (card->hw.type == PC300_X21) { |
| cpc_writeb(scabase + M_REG(GPO, ch), 0); |
| cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); |
| } else { |
| cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); |
| } |
| } |
| break; |
| |
| case PC300_TE: |
| /* SCA always receives clock from the FALC chip */ |
| cpc_writeb(scabase + M_REG(TMCT, ch), 1); |
| cpc_writeb(scabase + M_REG(TXS, ch), 0); |
| cpc_writeb(scabase + M_REG(TMCR, ch), 1); |
| cpc_writeb(scabase + M_REG(RXS, ch), 0); |
| cpc_writeb(scabase + M_REG(EXS, ch), 0); |
| break; |
| } |
| |
| /* Enable Interrupts */ |
| cpc_writel(scabase + IER0, |
| cpc_readl(scabase + IER0) | |
| IR0_M(IR0_RXINTA, ch) | |
| IR0_DRX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch) | |
| IR0_DTX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch)); |
| cpc_writeb(scabase + M_REG(IE0, ch), |
| cpc_readl(scabase + M_REG(IE0, ch)) | IE0_RXINTA); |
| cpc_writeb(scabase + M_REG(IE1, ch), |
| cpc_readl(scabase + M_REG(IE1, ch)) | IE1_CDCD); |
| |
| return 0; |
| } |
| |
| static int rx_config(pc300dev_t * d) |
| { |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| void __iomem *scabase = card->hw.scabase; |
| int ch = chan->channel; |
| |
| cpc_writeb(scabase + DSR_RX(ch), 0); |
| |
| /* General RX settings */ |
| cpc_writeb(scabase + M_REG(RRC, ch), 0); |
| cpc_writeb(scabase + M_REG(RNR, ch), 16); |
| |
| /* Enable reception */ |
| cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_CRC_INIT); |
| cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_ENA); |
| |
| /* Initialize DMA stuff */ |
| chan->rx_first_bd = 0; |
| chan->rx_last_bd = N_DMA_RX_BUF - 1; |
| rx_dma_buf_init(card, ch); |
| cpc_writeb(scabase + DCR_RX(ch), DCR_FCT_CLR); |
| cpc_writeb(scabase + DMR_RX(ch), (DMR_TMOD | DMR_NF)); |
| cpc_writeb(scabase + DIR_RX(ch), (DIR_EOM | DIR_BOF)); |
| |
| /* Start DMA */ |
| rx_dma_start(card, ch); |
| |
| return 0; |
| } |
| |
| static int tx_config(pc300dev_t * d) |
| { |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| void __iomem *scabase = card->hw.scabase; |
| int ch = chan->channel; |
| |
| cpc_writeb(scabase + DSR_TX(ch), 0); |
| |
| /* General TX settings */ |
| cpc_writeb(scabase + M_REG(TRC0, ch), 0); |
| cpc_writeb(scabase + M_REG(TFS, ch), 32); |
| cpc_writeb(scabase + M_REG(TNR0, ch), 20); |
| cpc_writeb(scabase + M_REG(TNR1, ch), 48); |
| cpc_writeb(scabase + M_REG(TCR, ch), 8); |
| |
| /* Enable transmission */ |
| cpc_writeb(scabase + M_REG(CMD, ch), CMD_TX_CRC_INIT); |
| |
| /* Initialize DMA stuff */ |
| chan->tx_first_bd = 0; |
| chan->tx_next_bd = 0; |
| tx_dma_buf_init(card, ch); |
| cpc_writeb(scabase + DCR_TX(ch), DCR_FCT_CLR); |
| cpc_writeb(scabase + DMR_TX(ch), (DMR_TMOD | DMR_NF)); |
| cpc_writeb(scabase + DIR_TX(ch), (DIR_EOM | DIR_BOF | DIR_UDRF)); |
| cpc_writel(scabase + DTX_REG(CDAL, ch), TX_BD_ADDR(ch, chan->tx_first_bd)); |
| cpc_writel(scabase + DTX_REG(EDAL, ch), TX_BD_ADDR(ch, chan->tx_next_bd)); |
| |
| return 0; |
| } |
| |
| static int cpc_attach(struct net_device *dev, unsigned short encoding, |
| unsigned short parity) |
| { |
| pc300dev_t *d = (pc300dev_t *)dev->priv; |
| pc300ch_t *chan = (pc300ch_t *)d->chan; |
| pc300_t *card = (pc300_t *)chan->card; |
| pc300chconf_t *conf = (pc300chconf_t *)&chan->conf; |
| |
| if (card->hw.type == PC300_TE) { |
| if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI) { |
| return -EINVAL; |
| } |
| } else { |
| if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI && |
| encoding != ENCODING_FM_MARK && encoding != ENCODING_FM_SPACE) { |
| /* Driver doesn't support ENCODING_MANCHESTER yet */ |
| return -EINVAL; |
| } |
| } |
| |
| if (parity != PARITY_NONE && parity != PARITY_CRC16_PR0 && |
| parity != PARITY_CRC16_PR1 && parity != PARITY_CRC32_PR1_CCITT && |
| parity != PARITY_CRC16_PR1_CCITT) { |
| return -EINVAL; |
| } |
| |
| conf->proto_settings.encoding = encoding; |
| conf->proto_settings.parity = parity; |
| return 0; |
| } |
| |
| static int cpc_opench(pc300dev_t * d) |
| { |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| int ch = chan->channel, rc; |
| void __iomem *scabase = card->hw.scabase; |
| |
| rc = ch_config(d); |
| if (rc) |
| return rc; |
| |
| rx_config(d); |
| |
| tx_config(d); |
| |
| /* Assert RTS and DTR */ |
| cpc_writeb(scabase + M_REG(CTL, ch), |
| cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR)); |
| |
| return 0; |
| } |
| |
| static void cpc_closech(pc300dev_t * d) |
| { |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| falc_t *pfalc = (falc_t *) & chan->falc; |
| int ch = chan->channel; |
| |
| cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_CH_RST); |
| rx_dma_stop(card, ch); |
| tx_dma_stop(card, ch); |
| |
| if (card->hw.type == PC300_TE) { |
| memset(pfalc, 0, sizeof(falc_t)); |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & |
| ~((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK | |
| CPLD_REG2_FALC_LED2) << (2 * ch))); |
| /* Reset the FALC chip */ |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | |
| (CPLD_REG1_FALC_RESET << (2 * ch))); |
| udelay(10000); |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & |
| ~(CPLD_REG1_FALC_RESET << (2 * ch))); |
| } |
| } |
| |
| int cpc_open(struct net_device *dev) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| struct ifreq ifr; |
| int result; |
| |
| #ifdef PC300_DEBUG_OTHER |
| printk("pc300: cpc_open"); |
| #endif |
| |
| #ifdef FIXME |
| if (hdlc->proto.id == IF_PROTO_PPP) { |
| d->if_ptr = &hdlc->state.ppp.pppdev; |
| } |
| #endif |
| |
| result = hdlc_open(dev); |
| if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { |
| dev->priv = d; |
| } |
| if (result) { |
| return result; |
| } |
| |
| sprintf(ifr.ifr_name, "%s", dev->name); |
| result = cpc_opench(d); |
| if (result) |
| goto err_out; |
| |
| netif_start_queue(dev); |
| return 0; |
| |
| err_out: |
| hdlc_close(dev); |
| return result; |
| } |
| |
| static int cpc_close(struct net_device *dev) |
| { |
| pc300dev_t *d = (pc300dev_t *) dev->priv; |
| pc300ch_t *chan = (pc300ch_t *) d->chan; |
| pc300_t *card = (pc300_t *) chan->card; |
| unsigned long flags; |
| |
| #ifdef PC300_DEBUG_OTHER |
| printk("pc300: cpc_close"); |
| #endif |
| |
| netif_stop_queue(dev); |
| |
| CPC_LOCK(card, flags); |
| cpc_closech(d); |
| CPC_UNLOCK(card, flags); |
| |
| hdlc_close(dev); |
| if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { |
| d->if_ptr = NULL; |
| } |
| #ifdef CONFIG_PC300_MLPPP |
| if (chan->conf.proto == PC300_PROTO_MLPPP) { |
| cpc_tty_unregister_service(d); |
| chan->conf.proto = 0xffff; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static uclong detect_ram(pc300_t * card) |
| { |
| uclong i; |
| ucchar data; |
| void __iomem *rambase = card->hw.rambase; |
| |
| card->hw.ramsize = PC300_RAMSIZE; |
| /* Let's find out how much RAM is present on this board */ |
| for (i = 0; i < card->hw.ramsize; i++) { |
| data = (ucchar) (i & 0xff); |
| cpc_writeb(rambase + i, data); |
| if (cpc_readb(rambase + i) != data) { |
| break; |
| } |
| } |
| return (i); |
| } |
| |
| static void plx_init(pc300_t * card) |
| { |
| struct RUNTIME_9050 __iomem *plx_ctl = card->hw.plxbase; |
| |
| /* Reset PLX */ |
| cpc_writel(&plx_ctl->init_ctrl, |
| cpc_readl(&plx_ctl->init_ctrl) | 0x40000000); |
| udelay(10000L); |
| cpc_writel(&plx_ctl->init_ctrl, |
| cpc_readl(&plx_ctl->init_ctrl) & ~0x40000000); |
| |
| /* Reload Config. Registers from EEPROM */ |
| cpc_writel(&plx_ctl->init_ctrl, |
| cpc_readl(&plx_ctl->init_ctrl) | 0x20000000); |
| udelay(10000L); |
| cpc_writel(&plx_ctl->init_ctrl, |
| cpc_readl(&plx_ctl->init_ctrl) & ~0x20000000); |
| |
| } |
| |
| static inline void show_version(void) |
| { |
| char *rcsvers, *rcsdate, *tmp; |
| |
| rcsvers = strchr(rcsid, ' '); |
| rcsvers++; |
| tmp = strchr(rcsvers, ' '); |
| *tmp++ = '\0'; |
| rcsdate = strchr(tmp, ' '); |
| rcsdate++; |
| tmp = strrchr(rcsdate, ' '); |
| *tmp = '\0'; |
| printk(KERN_INFO "Cyclades-PC300 driver %s %s (built %s %s)\n", |
| rcsvers, rcsdate, __DATE__, __TIME__); |
| } /* show_version */ |
| |
| static void cpc_init_card(pc300_t * card) |
| { |
| int i, devcount = 0; |
| static int board_nbr = 1; |
| |
| /* Enable interrupts on the PCI bridge */ |
| plx_init(card); |
| cpc_writew(card->hw.plxbase + card->hw.intctl_reg, |
| cpc_readw(card->hw.plxbase + card->hw.intctl_reg) | 0x0040); |
| |
| #ifdef USE_PCI_CLOCK |
| /* Set board clock to PCI clock */ |
| cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, |
| cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) | 0x00000004UL); |
| card->hw.clock = PC300_PCI_CLOCK; |
| #else |
| /* Set board clock to internal oscillator clock */ |
| cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, |
| cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & ~0x00000004UL); |
| card->hw.clock = PC300_OSC_CLOCK; |
| #endif |
| |
| /* Detect actual on-board RAM size */ |
| card->hw.ramsize = detect_ram(card); |
| |
| /* Set Global SCA-II registers */ |
| cpc_writeb(card->hw.scabase + PCR, PCR_PR2); |
| cpc_writeb(card->hw.scabase + BTCR, 0x10); |
| cpc_writeb(card->hw.scabase + WCRL, 0); |
| cpc_writeb(card->hw.scabase + DMER, 0x80); |
| |
| if (card->hw.type == PC300_TE) { |
| ucchar reg1; |
| |
| /* Check CPLD version */ |
| reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1); |
| cpc_writeb(card->hw.falcbase + CPLD_REG1, (reg1 + 0x5a)); |
| if (cpc_readb(card->hw.falcbase + CPLD_REG1) == reg1) { |
| /* New CPLD */ |
| card->hw.cpld_id = cpc_readb(card->hw.falcbase + CPLD_ID_REG); |
| card->hw.cpld_reg1 = CPLD_V2_REG1; |
| card->hw.cpld_reg2 = CPLD_V2_REG2; |
| } else { |
| /* old CPLD */ |
| card->hw.cpld_id = 0; |
| card->hw.cpld_reg1 = CPLD_REG1; |
| card->hw.cpld_reg2 = CPLD_REG2; |
| cpc_writeb(card->hw.falcbase + CPLD_REG1, reg1); |
| } |
| |
| /* Enable the board's global clock */ |
| cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, |
| cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | |
| CPLD_REG1_GLOBAL_CLK); |
| |
| } |
| |
| for (i = 0; i < card->hw.nchan; i++) { |
| pc300ch_t *chan = &card->chan[i]; |
| pc300dev_t *d = &chan->d; |
| hdlc_device *hdlc; |
| struct net_device *dev; |
| |
| chan->card = card; |
| chan->channel = i; |
| chan->conf.phys_settings.clock_rate = 0; |
| chan->conf.phys_settings.clock_type = CLOCK_EXT; |
| chan->conf.proto_settings.encoding = ENCODING_NRZ; |
| chan->conf.proto_settings.parity = PARITY_CRC16_PR1_CCITT; |
| switch (card->hw.type) { |
| case PC300_TE: |
| chan->conf.media = IF_IFACE_T1; |
| chan->conf.lcode = PC300_LC_B8ZS; |
| chan->conf.fr_mode = PC300_FR_ESF; |
| chan->conf.lbo = PC300_LBO_0_DB; |
| chan->conf.rx_sens = PC300_RX_SENS_SH; |
| chan->conf.tslot_bitmap = 0xffffffffUL; |
| break; |
| |
| case PC300_X21: |
| chan->conf.media = IF_IFACE_X21; |
| break; |
| |
| case PC300_RSV: |
| default: |
| chan->conf.media = IF_IFACE_V35; |
| break; |
| } |
| chan->conf.proto = IF_PROTO_PPP; |
| chan->tx_first_bd = 0; |
| chan->tx_next_bd = 0; |
| chan->rx_first_bd = 0; |
| chan->rx_last_bd = N_DMA_RX_BUF - 1; |
| chan->nfree_tx_bd = N_DMA_TX_BUF; |
| |
| d->chan = chan; |
| d->tx_skb = NULL; |
| d->trace_on = 0; |
| d->line_on = 0; |
| d->line_off = 0; |
| |
| dev = alloc_hdlcdev(NULL); |
| if (dev == NULL) |
| continue; |
| |
| hdlc = dev_to_hdlc(dev); |
| hdlc->xmit = cpc_queue_xmit; |
| hdlc->attach = cpc_attach; |
| d->dev = dev; |
| dev->mem_start = card->hw.ramphys; |
| dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1; |
| dev->irq = card->hw.irq; |
| dev->init = NULL; |
| dev->tx_queue_len = PC300_TX_QUEUE_LEN; |
| dev->mtu = PC300_DEF_MTU; |
| |
| dev->open = cpc_open; |
| dev->stop = cpc_close; |
| dev->tx_timeout = cpc_tx_timeout; |
| dev->watchdog_timeo = PC300_TX_TIMEOUT; |
| dev->get_stats = cpc_get_stats; |
| dev->set_multicast_list = NULL; |
| dev->set_mac_address = NULL; |
| dev->change_mtu = cpc_change_mtu; |
| dev->do_ioctl = cpc_ioctl; |
| |
| if (register_hdlc_device(dev) == 0) { |
| dev->priv = d; /* We need 'priv', hdlc doesn't */ |
| printk("%s: Cyclades-PC300/", dev->name); |
| switch (card->hw.type) { |
| case PC300_TE: |
| if (card->hw.bus == PC300_PMC) { |
| printk("TE-M"); |
| } else { |
| printk("TE "); |
| } |
| break; |
| |
| case PC300_X21: |
| printk("X21 "); |
| break; |
| |
| case PC300_RSV: |
| default: |
| printk("RSV "); |
| break; |
| } |
| printk (" #%d, %dKB of RAM at 0x%08x, IRQ%d, channel %d.\n", |
| board_nbr, card->hw.ramsize / 1024, |
| card->hw.ramphys, card->hw.irq, i + 1); |
| devcount++; |
| } else { |
| printk ("Dev%d on card(0x%08x): unable to allocate i/f name.\n", |
| i + 1, card->hw.ramphys); |
| free_netdev(dev); |
| continue; |
| } |
| } |
| spin_lock_init(&card->card_lock); |
| |
| board_nbr++; |
| } |
| |
| static int __devinit |
| cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static int first_time = 1; |
| ucchar cpc_rev_id; |
| int err, eeprom_outdated = 0; |
| ucshort device_id; |
| pc300_t *card; |
| |
| if (first_time) { |
| first_time = 0; |
| show_version(); |
| #ifdef CONFIG_PC300_MLPPP |
| cpc_tty_reset_var(); |
| #endif |
| } |
| |
| if ((err = pci_enable_device(pdev)) < 0) |
| return err; |
| |
| card = kmalloc(sizeof(pc300_t), GFP_KERNEL); |
| if (card == NULL) { |
| printk("PC300 found at RAM 0x%016llx, " |
| "but could not allocate card structure.\n", |
| (unsigned long long)pci_resource_start(pdev, 3)); |
| err = -ENOMEM; |
| goto err_disable_dev; |
| } |
| memset(card, 0, sizeof(pc300_t)); |
| |
| err = -ENODEV; |
| |
| /* read PCI configuration area */ |
| device_id = ent->device; |
| card->hw.irq = pdev->irq; |
| card->hw.iophys = pci_resource_start(pdev, 1); |
| card->hw.iosize = pci_resource_len(pdev, 1); |
| card->hw.scaphys = pci_resource_start(pdev, 2); |
| card->hw.scasize = pci_resource_len(pdev, 2); |
| card->hw.ramphys = pci_resource_start(pdev, 3); |
| card->hw.alloc_ramsize = pci_resource_len(pdev, 3); |
| card->hw.falcphys = pci_resource_start(pdev, 4); |
| card->hw.falcsize = pci_resource_len(pdev, 4); |
| card->hw.plxphys = pci_resource_start(pdev, 5); |
| card->hw.plxsize = pci_resource_len(pdev, 5); |
| pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id); |
| |
| switch (device_id) { |
| case PCI_DEVICE_ID_PC300_RX_1: |
| case PCI_DEVICE_ID_PC300_TE_1: |
| case PCI_DEVICE_ID_PC300_TE_M_1: |
| card->hw.nchan = 1; |
| break; |
| |
| case PCI_DEVICE_ID_PC300_RX_2: |
| case PCI_DEVICE_ID_PC300_TE_2: |
| case PCI_DEVICE_ID_PC300_TE_M_2: |
| default: |
| card->hw.nchan = PC300_MAXCHAN; |
| break; |
| } |
| #ifdef PC300_DEBUG_PCI |
| printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn); |
| printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq); |
| printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx " |
| "ctladdr=0x%08lx falcaddr=0x%08lx\n", |
| card->hw.ramphys, card->hw.plxphys, card->hw.scaphys, |
| card->hw.falcphys); |
| #endif |
| /* Although we don't use this I/O region, we should |
| * request it from the kernel anyway, to avoid problems |
| * with other drivers accessing it. */ |
| if (!request_region(card->hw.iophys, card->hw.iosize, "PLX Registers")) { |
| /* In case we can't allocate it, warn user */ |
| printk("WARNING: couldn't allocate I/O region for PC300 board " |
| "at 0x%08x!\n", card->hw.ramphys); |
| } |
| |
| if (card->hw.plxphys) { |
| pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, card->hw.plxphys); |
| } else { |
| eeprom_outdated = 1; |
| card->hw.plxphys = pci_resource_start(pdev, 0); |
| card->hw.plxsize = pci_resource_len(pdev, 0); |
| } |
| |
| if (!request_mem_region(card->hw.plxphys, card->hw.plxsize, |
| "PLX Registers")) { |
| printk("PC300 found at RAM 0x%08x, " |
| "but could not allocate PLX mem region.\n", |
| card->hw.ramphys); |
| goto err_release_io; |
| } |
| if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize, |
| "On-board RAM")) { |
| printk("PC300 found at RAM 0x%08x, " |
| "but could not allocate RAM mem region.\n", |
| card->hw.ramphys); |
| goto err_release_plx; |
| } |
| if (!request_mem_region(card->hw.scaphys, card->hw.scasize, |
| "SCA-II Registers")) { |
| printk("PC300 found at RAM 0x%08x, " |
| "but could not allocate SCA mem region.\n", |
| card->hw.ramphys); |
| goto err_release_ram; |
| } |
| |
| card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize); |
| card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize); |
| card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize); |
| switch (device_id) { |
| case PCI_DEVICE_ID_PC300_TE_1: |
| case PCI_DEVICE_ID_PC300_TE_2: |
| case PCI_DEVICE_ID_PC300_TE_M_1: |
| case PCI_DEVICE_ID_PC300_TE_M_2: |
| request_mem_region(card->hw.falcphys, card->hw.falcsize, |
| "FALC Registers"); |
| card->hw.falcbase = ioremap(card->hw.falcphys, card->hw.falcsize); |
| break; |
| |
| case PCI_DEVICE_ID_PC300_RX_1: |
| case PCI_DEVICE_ID_PC300_RX_2: |
| default: |
| card->hw.falcbase = NULL; |
| break; |
| } |
| |
| #ifdef PC300_DEBUG_PCI |
| printk("cpc: relocate ramaddr=0x%08lx plxaddr=0x%08lx " |
| "ctladdr=0x%08lx falcaddr=0x%08lx\n", |
| card->hw.rambase, card->hw.plxbase, card->hw.scabase, |
| card->hw.falcbase); |
| #endif |
| |
| /* Set PCI drv pointer to the card structure */ |
| pci_set_drvdata(pdev, card); |
| |
| /* Set board type */ |
| switch (device_id) { |
| case PCI_DEVICE_ID_PC300_TE_1: |
| case PCI_DEVICE_ID_PC300_TE_2: |
| case PCI_DEVICE_ID_PC300_TE_M_1: |
| case PCI_DEVICE_ID_PC300_TE_M_2: |
| card->hw.type = PC300_TE; |
| |
| if ((device_id == PCI_DEVICE_ID_PC300_TE_M_1) || |
| (device_id == PCI_DEVICE_ID_PC300_TE_M_2)) { |
| card->hw.bus = PC300_PMC; |
| /* Set PLX register offsets */ |
| card->hw.gpioc_reg = 0x54; |
| card->hw.intctl_reg = 0x4c; |
| } else { |
| card->hw.bus = PC300_PCI; |
| /* Set PLX register offsets */ |
| card->hw.gpioc_reg = 0x50; |
| card->hw.intctl_reg = 0x4c; |
| } |
| break; |
| |
| case PCI_DEVICE_ID_PC300_RX_1: |
| case PCI_DEVICE_ID_PC300_RX_2: |
| default: |
| card->hw.bus = PC300_PCI; |
| /* Set PLX register offsets */ |
| card->hw.gpioc_reg = 0x50; |
| card->hw.intctl_reg = 0x4c; |
| |
| if ((cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & PC300_CTYPE_MASK)) { |
| card->hw.type = PC300_X21; |
| } else { |
| card->hw.type = PC300_RSV; |
| } |
| break; |
| } |
| |
| /* Allocate IRQ */ |
| if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) { |
| printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n", |
| card->hw.ramphys, card->hw.irq); |
| goto err_io_unmap; |
| } |
| |
| cpc_init_card(card); |
| |
| if (eeprom_outdated) |
| printk("WARNING: PC300 with outdated EEPROM.\n"); |
| return 0; |
| |
| err_io_unmap: |
| iounmap(card->hw.plxbase); |
| iounmap(card->hw.scabase); |
| iounmap(card->hw.rambase); |
| if (card->hw.type == PC300_TE) { |
| iounmap(card->hw.falcbase); |
| release_mem_region(card->hw.falcphys, card->hw.falcsize); |
| } |
| release_mem_region(card->hw.scaphys, card->hw.scasize); |
| err_release_ram: |
| release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); |
| err_release_plx: |
| release_mem_region(card->hw.plxphys, card->hw.plxsize); |
| err_release_io: |
| release_region(card->hw.iophys, card->hw.iosize); |
| kfree(card); |
| err_disable_dev: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| static void __devexit cpc_remove_one(struct pci_dev *pdev) |
| { |
| pc300_t *card = pci_get_drvdata(pdev); |
| |
| if (card->hw.rambase != 0) { |
| int i; |
| |
| /* Disable interrupts on the PCI bridge */ |
| cpc_writew(card->hw.plxbase + card->hw.intctl_reg, |
| cpc_readw(card->hw.plxbase + card->hw.intctl_reg) & ~(0x0040)); |
| |
| for (i = 0; i < card->hw.nchan; i++) { |
| unregister_hdlc_device(card->chan[i].d.dev); |
| } |
| iounmap(card->hw.plxbase); |
| iounmap(card->hw.scabase); |
| iounmap(card->hw.rambase); |
| release_mem_region(card->hw.plxphys, card->hw.plxsize); |
| release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); |
| release_mem_region(card->hw.scaphys, card->hw.scasize); |
| release_region(card->hw.iophys, card->hw.iosize); |
| if (card->hw.type == PC300_TE) { |
| iounmap(card->hw.falcbase); |
| release_mem_region(card->hw.falcphys, card->hw.falcsize); |
| } |
| for (i = 0; i < card->hw.nchan; i++) |
| if (card->chan[i].d.dev) |
| free_netdev(card->chan[i].d.dev); |
| if (card->hw.irq) |
| free_irq(card->hw.irq, card); |
| kfree(card); |
| pci_disable_device(pdev); |
| } |
| } |
| |
| static struct pci_driver cpc_driver = { |
| .name = "pc300", |
| .id_table = cpc_pci_dev_id, |
| .probe = cpc_init_one, |
| .remove = __devexit_p(cpc_remove_one), |
| }; |
| |
| static int __init cpc_init(void) |
| { |
| return pci_register_driver(&cpc_driver); |
| } |
| |
| static void __exit cpc_cleanup_module(void) |
| { |
| pci_unregister_driver(&cpc_driver); |
| } |
| |
| module_init(cpc_init); |
| module_exit(cpc_cleanup_module); |
| |
| MODULE_DESCRIPTION("Cyclades-PC300 cards driver"); |
| MODULE_AUTHOR( "Author: Ivan Passos <ivan@cyclades.com>\r\n" |
| "Maintainer: PC300 Maintainer <pc300@cyclades.com"); |
| MODULE_LICENSE("GPL"); |
| |