include/asm-powerpc/ucc_slow.h - fp2-dev/kernel/msm - Gitiles

 /*
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
  *
  * Description:
  * Internal header file for UCC SLOW unit routines.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
 #ifndef __UCC_SLOW_H__
 #define __UCC_SLOW_H__

 #include <linux/kernel.h>

 #include <asm/immap_qe.h>
 #include <asm/qe.h>

 #include "ucc.h"

 /* transmit BD's status */
 #define T_R	0x80000000	/* ready bit */
 #define T_PAD	0x40000000	/* add pads to short frames */
 #define T_W	0x20000000	/* wrap bit */
 #define T_I	0x10000000	/* interrupt on completion */
 #define T_L	0x08000000	/* last */

 #define T_A	0x04000000	/* Address - the data transmitted as address
 				   chars */
 #define T_TC	0x04000000	/* transmit CRC */
 #define T_CM	0x02000000	/* continuous mode */
 #define T_DEF	0x02000000	/* collision on previous attempt to transmit */
 #define T_P	0x01000000	/* Preamble - send Preamble sequence before
 				   data */
 #define T_HB	0x01000000	/* heartbeat */
 #define T_NS	0x00800000	/* No Stop */
 #define T_LC	0x00800000	/* late collision */
 #define T_RL	0x00400000	/* retransmission limit */
 #define T_UN	0x00020000	/* underrun */
 #define T_CT	0x00010000	/* CTS lost */
 #define T_CSL	0x00010000	/* carrier sense lost */
 #define T_RC	0x003c0000	/* retry count */

 /* Receive BD's status */
 #define R_E	0x80000000	/* buffer empty */
 #define R_W	0x20000000	/* wrap bit */
 #define R_I	0x10000000	/* interrupt on reception */
 #define R_L	0x08000000	/* last */
 #define R_C	0x08000000	/* the last byte in this buffer is a cntl
 				   char */
 #define R_F	0x04000000	/* first */
 #define R_A	0x04000000	/* the first byte in this buffer is address
 				   byte */
 #define R_CM	0x02000000	/* continuous mode */
 #define R_ID	0x01000000	/* buffer close on reception of idles */
 #define R_M	0x01000000	/* Frame received because of promiscuous
 				   mode */
 #define R_AM	0x00800000	/* Address match */
 #define R_DE	0x00800000	/* Address match */
 #define R_LG	0x00200000	/* Break received */
 #define R_BR	0x00200000	/* Frame length violation */
 #define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
 #define R_FR	0x00100000	/* Framing Error (no stop bit) character
 				   received */
 #define R_PR	0x00080000	/* Parity Error character received */
 #define R_AB	0x00080000	/* Frame Aborted */
 #define R_SH	0x00080000	/* frame is too short */
 #define R_CR	0x00040000	/* CRC Error */
 #define R_OV	0x00020000	/* Overrun */
 #define R_CD	0x00010000	/* CD lost */
 #define R_CL	0x00010000	/* this frame is closed because of a
 				   collision */

 /* Rx Data buffer must be 4 bytes aligned in most cases.*/
 #define UCC_SLOW_RX_ALIGN		4
 #define UCC_SLOW_MRBLR_ALIGNMENT	4
 #define UCC_SLOW_PRAM_SIZE		0x100
 #define ALIGNMENT_OF_UCC_SLOW_PRAM	64

 /* UCC Slow Channel Protocol Mode */
 enum ucc_slow_channel_protocol_mode {
 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
 };

 /* UCC Slow Transparent Transmit CRC (TCRC) */
 enum ucc_slow_transparent_tcrc {
 	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
 	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
 	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
 	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
 	/* 32-bit CCITT CRC (Ethernet and HDLC) */
 	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
 };

 /* UCC Slow oversampling rate for transmitter (TDCR) */
 enum ucc_slow_tx_oversampling_rate {
 	/* 1x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
 	/* 8x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
 	/* 16x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
 	/* 32x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
 };

 /* UCC Slow Oversampling rate for receiver (RDCR)
 */
 enum ucc_slow_rx_oversampling_rate {
 	/* 1x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
 	/* 8x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
 	/* 16x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
 	/* 32x clock mode */
 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
 };

 /* UCC Slow Transmitter encoding method (TENC)
 */
 enum ucc_slow_tx_encoding_method {
 	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
 	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
 };

 /* UCC Slow Receiver decoding method (RENC)
 */
 enum ucc_slow_rx_decoding_method {
 	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
 	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
 };

 /* UCC Slow Diagnostic mode (DIAG)
 */
 enum ucc_slow_diag_mode {
 	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
 	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
 	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
 	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
 };

 struct ucc_slow_info {
 	int ucc_num;
 	int protocol;			/* QE_CR_PROTOCOL_xxx */
 	enum qe_clock rx_clock;
 	enum qe_clock tx_clock;
 	phys_addr_t regs;
 	int irq;
 	u16 uccm_mask;
 	int data_mem_part;
 	int init_tx;
 	int init_rx;
 	u32 tx_bd_ring_len;
 	u32 rx_bd_ring_len;
 	int rx_interrupts;
 	int brkpt_support;
 	int grant_support;
 	int tsa;
 	int cdp;
 	int cds;
 	int ctsp;
 	int ctss;
 	int rinv;
 	int tinv;
 	int rtsm;
 	int rfw;
 	int tci;
 	int tend;
 	int tfl;
 	int txsy;
 	u16 max_rx_buf_length;
 	enum ucc_slow_transparent_tcrc tcrc;
 	enum ucc_slow_channel_protocol_mode mode;
 	enum ucc_slow_diag_mode diag;
 	enum ucc_slow_tx_oversampling_rate tdcr;
 	enum ucc_slow_rx_oversampling_rate rdcr;
 	enum ucc_slow_tx_encoding_method tenc;
 	enum ucc_slow_rx_decoding_method renc;
 };

 struct ucc_slow_private {
 	struct ucc_slow_info *us_info;
 	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
 	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
 	u32 us_pram_offset;
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
 	int stopped_tx;		/* Whether channel has been stopped for Tx
 				   (STOP_TX, etc.) */
 	int stopped_rx;		/* Whether channel has been stopped for Rx */
 	struct list_head confQ;	/* frames passed to chip waiting for tx */
 	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
 				   and length for first BD in a frame */
 	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
 	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
 	struct qe_bd *confBd;	/* next BD for confirm after Tx */
 	struct qe_bd *tx_bd;	/* next BD for new Tx request */
 	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
 	void *p_rx_frame;	/* accumulating receive frame */
 	u16 *p_ucce;		/* a pointer to the event register in memory.
 				 */
 	u16 *p_uccm;		/* a pointer to the mask register in memory */
 	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
 #ifdef STATISTICS
 	u32 tx_frames;		/* Transmitted frames counters */
 	u32 rx_frames;		/* Received frames counters (only frames
 				   passed to application) */
 	u32 rx_discarded;	/* Discarded frames counters (frames that
 				   were discarded by the driver due to
 				   errors) */
 #endif				/* STATISTICS */
 };

 /* ucc_slow_init
  * Initializes Slow UCC according to provided parameters.
  *
  * us_info  - (In) pointer to the slow UCC info structure.
  * uccs_ret - (Out) pointer to the slow UCC structure.
  */
 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);

 /* ucc_slow_free
  * Frees all resources for slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
 void ucc_slow_free(struct ucc_slow_private * uccs);

 /* ucc_slow_enable
  * Enables a fast UCC port.
  * This routine enables Tx and/or Rx through the General UCC Mode Register.
  *
  * uccs - (In) pointer to the slow UCC structure.
  * mode - (In) TX, RX, or both.
  */
 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);

 /* ucc_slow_disable
  * Disables a fast UCC port.
  * This routine disables Tx and/or Rx through the General UCC Mode Register.
  *
  * uccs - (In) pointer to the slow UCC structure.
  * mode - (In) TX, RX, or both.
  */
 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);

 /* ucc_slow_poll_transmitter_now
  * Immediately forces a poll of the transmitter for data to be sent.
  * Typically, the hardware performs a periodic poll for data that the
  * transmit routine has set up to be transmitted. In cases where
  * this polling cycle is not soon enough, this optional routine can
  * be invoked to force a poll right away, instead. Proper use for
  * each transmission for which this functionality is desired is to
  * call the transmit routine and then this routine right after.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
 void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);

 /* ucc_slow_graceful_stop_tx
  * Smoothly stops transmission on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
 void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);

 /* ucc_slow_stop_tx
  * Stops transmission on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
 void ucc_slow_stop_tx(struct ucc_slow_private * uccs);

 /* ucc_slow_restart_tx
  * Restarts transmitting on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
 void ucc_slow_restart_tx(struct ucc_slow_private *uccs);

 u32 ucc_slow_get_qe_cr_subblock(int uccs_num);

 #endif				/* __UCC_SLOW_H__ */
	/*
	* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
	*
	* Authors: Shlomi Gridish <gridish@freescale.com>
	* Li Yang <leoli@freescale.com>
	*
	* Description:
	* Internal header file for UCC SLOW unit routines.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/
	#ifndef __UCC_SLOW_H__
	#define __UCC_SLOW_H__

	#include <linux/kernel.h>

	#include <asm/immap_qe.h>
	#include <asm/qe.h>

	#include "ucc.h"

	/* transmit BD's status */
	#define T_R 0x80000000 /* ready bit */
	#define T_PAD 0x40000000 /* add pads to short frames */
	#define T_W 0x20000000 /* wrap bit */
	#define T_I 0x10000000 /* interrupt on completion */
	#define T_L 0x08000000 /* last */

	#define T_A 0x04000000 /* Address - the data transmitted as address
	chars */
	#define T_TC 0x04000000 /* transmit CRC */
	#define T_CM 0x02000000 /* continuous mode */
	#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
	#define T_P 0x01000000 /* Preamble - send Preamble sequence before
	data */
	#define T_HB 0x01000000 /* heartbeat */
	#define T_NS 0x00800000 /* No Stop */
	#define T_LC 0x00800000 /* late collision */
	#define T_RL 0x00400000 /* retransmission limit */
	#define T_UN 0x00020000 /* underrun */
	#define T_CT 0x00010000 /* CTS lost */
	#define T_CSL 0x00010000 /* carrier sense lost */
	#define T_RC 0x003c0000 /* retry count */

	/* Receive BD's status */
	#define R_E 0x80000000 /* buffer empty */
	#define R_W 0x20000000 /* wrap bit */
	#define R_I 0x10000000 /* interrupt on reception */
	#define R_L 0x08000000 /* last */
	#define R_C 0x08000000 /* the last byte in this buffer is a cntl
	char */
	#define R_F 0x04000000 /* first */
	#define R_A 0x04000000 /* the first byte in this buffer is address
	byte */
	#define R_CM 0x02000000 /* continuous mode */
	#define R_ID 0x01000000 /* buffer close on reception of idles */
	#define R_M 0x01000000 /* Frame received because of promiscuous
	mode */
	#define R_AM 0x00800000 /* Address match */
	#define R_DE 0x00800000 /* Address match */
	#define R_LG 0x00200000 /* Break received */
	#define R_BR 0x00200000 /* Frame length violation */
	#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
	#define R_FR 0x00100000 /* Framing Error (no stop bit) character
	received */
	#define R_PR 0x00080000 /* Parity Error character received */
	#define R_AB 0x00080000 /* Frame Aborted */
	#define R_SH 0x00080000 /* frame is too short */
	#define R_CR 0x00040000 /* CRC Error */
	#define R_OV 0x00020000 /* Overrun */
	#define R_CD 0x00010000 /* CD lost */
	#define R_CL 0x00010000 /* this frame is closed because of a
	collision */

	/* Rx Data buffer must be 4 bytes aligned in most cases.*/
	#define UCC_SLOW_RX_ALIGN 4
	#define UCC_SLOW_MRBLR_ALIGNMENT 4
	#define UCC_SLOW_PRAM_SIZE 0x100
	#define ALIGNMENT_OF_UCC_SLOW_PRAM 64

	/* UCC Slow Channel Protocol Mode */
	enum ucc_slow_channel_protocol_mode {
	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
	};

	/* UCC Slow Transparent Transmit CRC (TCRC) */
	enum ucc_slow_transparent_tcrc {
	/* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
	/* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
	/* 32-bit CCITT CRC (Ethernet and HDLC) */
	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
	};

	/* UCC Slow oversampling rate for transmitter (TDCR) */
	enum ucc_slow_tx_oversampling_rate {
	/* 1x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
	/* 8x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
	/* 16x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
	/* 32x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
	};

	/* UCC Slow Oversampling rate for receiver (RDCR)
	*/
	enum ucc_slow_rx_oversampling_rate {
	/* 1x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
	/* 8x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
	/* 16x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
	/* 32x clock mode */
	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
	};

	/* UCC Slow Transmitter encoding method (TENC)
	*/
	enum ucc_slow_tx_encoding_method {
	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
	};

	/* UCC Slow Receiver decoding method (RENC)
	*/
	enum ucc_slow_rx_decoding_method {
	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
	};

	/* UCC Slow Diagnostic mode (DIAG)
	*/
	enum ucc_slow_diag_mode {
	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
	};

	struct ucc_slow_info {
	int ucc_num;
	int protocol; /* QE_CR_PROTOCOL_xxx */
	enum qe_clock rx_clock;
	enum qe_clock tx_clock;
	phys_addr_t regs;
	int irq;
	u16 uccm_mask;
	int data_mem_part;
	int init_tx;
	int init_rx;
	u32 tx_bd_ring_len;
	u32 rx_bd_ring_len;
	int rx_interrupts;
	int brkpt_support;
	int grant_support;
	int tsa;
	int cdp;
	int cds;
	int ctsp;
	int ctss;
	int rinv;
	int tinv;
	int rtsm;
	int rfw;
	int tci;
	int tend;
	int tfl;
	int txsy;
	u16 max_rx_buf_length;
	enum ucc_slow_transparent_tcrc tcrc;
	enum ucc_slow_channel_protocol_mode mode;
	enum ucc_slow_diag_mode diag;
	enum ucc_slow_tx_oversampling_rate tdcr;
	enum ucc_slow_rx_oversampling_rate rdcr;
	enum ucc_slow_tx_encoding_method tenc;
	enum ucc_slow_rx_decoding_method renc;
	};

	struct ucc_slow_private {
	struct ucc_slow_info *us_info;
	struct ucc_slow __iomem us_regs; / Ptr to memory map of UCC regs */
	struct ucc_slow_pram us_pram; / a pointer to the parameter RAM */
	u32 us_pram_offset;
	int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
	int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
	int stopped_tx; /* Whether channel has been stopped for Tx
	(STOP_TX, etc.) */
	int stopped_rx; /* Whether channel has been stopped for Rx */
	struct list_head confQ; /* frames passed to chip waiting for tx */
	u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
	and length for first BD in a frame */
	u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
	u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
	struct qe_bd confBd; / next BD for confirm after Tx */
	struct qe_bd tx_bd; / next BD for new Tx request */
	struct qe_bd rx_bd; / next BD to collect after Rx */
	void p_rx_frame; / accumulating receive frame */
	u16 p_ucce; / a pointer to the event register in memory.
	*/
	u16 p_uccm; / a pointer to the mask register in memory */
	u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
	#ifdef STATISTICS
	u32 tx_frames; /* Transmitted frames counters */
	u32 rx_frames; /* Received frames counters (only frames
	passed to application) */
	u32 rx_discarded; /* Discarded frames counters (frames that
	were discarded by the driver due to
	errors) */
	#endif /* STATISTICS */
	};

	/* ucc_slow_init
	* Initializes Slow UCC according to provided parameters.
	*
	* us_info - (In) pointer to the slow UCC info structure.
	* uccs_ret - (Out) pointer to the slow UCC structure.
	*/
	int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);

	/* ucc_slow_free
	* Frees all resources for slow UCC.
	*
	* uccs - (In) pointer to the slow UCC structure.
	*/
	void ucc_slow_free(struct ucc_slow_private * uccs);

	/* ucc_slow_enable
	* Enables a fast UCC port.
	* This routine enables Tx and/or Rx through the General UCC Mode Register.
	*
	* uccs - (In) pointer to the slow UCC structure.
	* mode - (In) TX, RX, or both.
	*/
	void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);

	/* ucc_slow_disable
	* Disables a fast UCC port.
	* This routine disables Tx and/or Rx through the General UCC Mode Register.
	*
	* uccs - (In) pointer to the slow UCC structure.
	* mode - (In) TX, RX, or both.
	*/
	void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);

	/* ucc_slow_poll_transmitter_now
	* Immediately forces a poll of the transmitter for data to be sent.
	* Typically, the hardware performs a periodic poll for data that the
	* transmit routine has set up to be transmitted. In cases where
	* this polling cycle is not soon enough, this optional routine can
	* be invoked to force a poll right away, instead. Proper use for
	* each transmission for which this functionality is desired is to
	* call the transmit routine and then this routine right after.
	*
	* uccs - (In) pointer to the slow UCC structure.
	*/
	void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);

	/* ucc_slow_graceful_stop_tx
	* Smoothly stops transmission on a specified slow UCC.
	*
	* uccs - (In) pointer to the slow UCC structure.
	*/
	void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);

	/* ucc_slow_stop_tx
	* Stops transmission on a specified slow UCC.
	*
	* uccs - (In) pointer to the slow UCC structure.
	*/
	void ucc_slow_stop_tx(struct ucc_slow_private * uccs);

	/* ucc_slow_restart_tx
	* Restarts transmitting on a specified slow UCC.
	*
	* uccs - (In) pointer to the slow UCC structure.
	*/
	void ucc_slow_restart_tx(struct ucc_slow_private *uccs);

	u32 ucc_slow_get_qe_cr_subblock(int uccs_num);

	#endif /* __UCC_SLOW_H__ */