diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index f67ca01..30e6444 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Thu Jul  7 16:41:21 2005
+# Linux kernel version: 2.6.13
+# Wed Sep 14 10:51:52 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -135,7 +135,6 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -179,6 +178,68 @@
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -248,6 +309,7 @@
 CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -334,72 +396,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -509,6 +507,8 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -635,7 +635,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_IXP2000 is not set
+CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -649,11 +649,28 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SENSOR=y
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -679,30 +696,15 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -770,6 +772,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -812,8 +815,7 @@
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 5c6c928..678720f 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Thu Jul  7 16:49:01 2005
+# Linux kernel version: 2.6.13
+# Wed Sep 14 10:52:01 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -136,7 +136,6 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -180,6 +179,68 @@
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -249,6 +310,7 @@
 CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -335,72 +397,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -510,6 +508,8 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -636,7 +636,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_IXP2000 is not set
+CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -650,11 +650,28 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SENSOR=y
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -680,30 +697,15 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -771,6 +773,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -813,8 +816,7 @@
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 6dc40f6..38c9a72 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Thu Jul  7 16:49:08 2005
+# Linux kernel version: 2.6.13
+# Wed Sep 14 10:52:10 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -136,7 +136,6 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -180,6 +179,68 @@
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -249,6 +310,7 @@
 CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -335,72 +397,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -511,6 +509,8 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -637,7 +637,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_IXP2000 is not set
+CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -651,11 +651,28 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SENSOR=y
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -681,30 +698,15 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -772,6 +774,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -814,8 +817,7 @@
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index d2bb0b7..261e234 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Thu Jul  7 16:49:20 2005
+# Linux kernel version: 2.6.13
+# Wed Sep 14 10:52:23 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -136,7 +136,6 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -180,6 +179,68 @@
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -249,6 +310,7 @@
 CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -335,72 +397,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -510,6 +508,8 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -636,7 +636,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_IXP2000 is not set
+CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -650,11 +650,28 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SENSOR=y
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -680,30 +697,15 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -771,6 +773,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -813,8 +816,7 @@
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index 2d6f960..12ef23d 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Thu Jul  7 16:49:13 2005
+# Linux kernel version: 2.6.13
+# Wed Sep 14 10:52:16 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -136,7 +136,6 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -180,6 +179,68 @@
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -249,6 +310,7 @@
 CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -335,72 +397,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -511,6 +509,8 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -637,7 +637,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_IXP2000 is not set
+CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -651,11 +651,28 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SENSOR=y
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -681,30 +698,15 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -772,6 +774,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -814,8 +817,7 @@
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 426c2bc..be37586 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -198,13 +198,10 @@
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+	if (( 1 << vdd) & p_d->ocr_mask)
 		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+	else
 		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	}
 }
 
 static int corgi_mci_get_ro(struct device *dev)
@@ -259,6 +256,16 @@
 
 static void __init corgi_init(void)
 {
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x0158C000;
+	PGSR1 = 0x00FF0080;
+	PGSR2 = 0x0001C004;
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR |= PCFR_OPDE;
+
 	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
 
 	pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
@@ -285,42 +292,14 @@
 		mi->bank[0].size = (64*1024*1024);
 }
 
-static void __init corgi_init_irq(void)
-{
-	pxa_init_irq();
-}
-
-static struct map_desc corgi_io_desc[] __initdata = {
-/*    virtual     physical    length      */
-/*	{ 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */
-/*	{ 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/  /* SCOOP */
-	{ 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-};
-
-static void __init corgi_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
-
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-}
-
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
 	.phys_ram	= 0xa0000000,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= corgi_map_io,
-	.init_irq	= corgi_init_irq,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -332,8 +311,8 @@
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= corgi_map_io,
-	.init_irq	= corgi_init_irq,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -345,8 +324,8 @@
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= corgi_map_io,
-	.init_irq	= corgi_init_irq,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 47cfb8b..f256388 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -30,6 +30,8 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/irq.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
 #include <asm/arch/poodle.h>
 #include <asm/arch/pxafb.h>
 
@@ -93,6 +95,83 @@
 	.resource	= locomo_resources,
 };
 
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static struct pxamci_platform_data poodle_mci_platform_data;
+
+static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+
+	/* setup GPIO for PXA25x MMC controller	*/
+	pxa_gpio_mode(GPIO6_MMCCLK_MD);
+	pxa_gpio_mode(GPIO8_MMCCS0_MD);
+	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
+	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
+
+	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT,
+			     "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+
+	set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+
+	return 0;
+}
+
+static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask)
+		GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
+	else
+		GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
+}
+
+static void poodle_mci_exit(struct device *dev, void *data)
+{
+	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+}
+
+static struct pxamci_platform_data poodle_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= poodle_mci_init,
+	.setpower 	= poodle_mci_setpower,
+	.exit		= poodle_mci_exit,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static void poodle_udc_command(int cmd)
+{
+	switch(cmd)	{
+	case PXA2XX_UDC_CMD_CONNECT:
+		GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	/* no connect GPIO; poodle can't tell connection status */
+	.udc_command		= poodle_udc_command,
+};
+
+
 /* PXAFB device */
 static struct pxafb_mach_info poodle_fb_info __initdata = {
 	.pixclock	= 144700,
@@ -126,6 +205,15 @@
 {
 	int ret = 0;
 
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x00008000;
+	PGSR1 = 0x003F0202;
+	PGSR2 = 0x0001C000;
+	PCFR |= PCFR_OPDE;
+
 	/* cpu initialize */
 	/* Pgsr Register */
   	PGSR0 = 0x0146dd80;
@@ -155,6 +243,9 @@
         GPSR2 = 0x00000000;
 
 	set_pxa_fb_info(&poodle_fb_info);
+	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+	pxa_set_udc_info(&udc_info);
+	pxa_set_mci_info(&poodle_mci_platform_data);
 
 	scoop_num = 1;
 	scoop_devs = &poodle_pcmcia_scoop[0];
@@ -171,32 +262,12 @@
 	sharpsl_save_param();
 }
 
-static struct map_desc poodle_io_desc[] __initdata = {
- /* virtual     physical    length                   */
-  { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-};
-
-static void __init poodle_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc));
-
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
-	PCFR |= PCFR_OPDE;
-}
-
 MACHINE_START(POODLE, "SHARP Poodle")
 	.phys_ram	= 0xa0000000,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
-	.map_io		= poodle_map_io,
+	.map_io		= pxa_map_io,
 	.init_irq	= pxa_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 8cb6911..25d6a4e 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -111,12 +111,11 @@
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
-	if (vpp) {
-		write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
-	} else {
-		write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
-	}
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	if (vpp)
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+	else
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 58d3738..407708a 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -534,7 +534,7 @@
 
 	unsigned long flags;
 	struct tty_struct *tty;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 
 	if (!(ch->asyncflags & ASYNC_INITIALIZED)) 
 		return;
@@ -618,7 +618,7 @@
 	struct channel *ch;
 	unsigned long flags;
 	int remain;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 
 	/* ----------------------------------------------------------------
 		pc_write is primarily called directly by the kernel routine
@@ -685,7 +685,7 @@
 		------------------------------------------------------------------- */
 
 		dataLen = min(bytesAvailable, dataLen);
-		memcpy(ch->txptr + head, buf, dataLen);
+		memcpy_toio(ch->txptr + head, buf, dataLen);
 		buf += dataLen;
 		head += dataLen;
 		amountCopied += dataLen;
@@ -726,7 +726,7 @@
 	struct channel *ch;
 	unsigned long flags;
 	unsigned int head, tail;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 
 	remain = 0;
 
@@ -773,7 +773,7 @@
 	int remain;
 	unsigned long flags;
 	struct channel *ch;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 
 	/* ---------------------------------------------------------
 		verifyChannel returns the channel from the tty struct
@@ -830,7 +830,7 @@
 	unsigned int tail;
 	unsigned long flags;
 	struct channel *ch;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	/* ---------------------------------------------------------
 		verifyChannel returns the channel from the tty struct
 		if it is valid.  This serves as a sanity check.
@@ -976,7 +976,7 @@
 	struct channel *ch;
 	unsigned long flags;
 	int line, retval, boardnum;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	unsigned int head;
 
 	line = tty->index;
@@ -1041,7 +1041,7 @@
 	ch->statusflags = 0;
 
 	/* Save boards current modem status */
-	ch->imodem = bc->mstat;
+	ch->imodem = readb(&bc->mstat);
 
 	/* ----------------------------------------------------------------
 	   Set receive head and tail ptrs to each other.  This indicates
@@ -1399,10 +1399,10 @@
 { /* Begin post_fep_init */
 
 	int i;
-	unsigned char *memaddr;
-	struct global_data *gd;
+	void __iomem *memaddr;
+	struct global_data __iomem *gd;
 	struct board_info *bd;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	struct channel *ch; 
 	int shrinkmem = 0, lowwater ; 
  
@@ -1461,7 +1461,7 @@
 		8 and 64 of these structures.
 	-------------------------------------------------------------------- */
 
-	bc = (struct board_chan *)(memaddr + CHANSTRUCT);
+	bc = memaddr + CHANSTRUCT;
 
 	/* -------------------------------------------------------------------
 		The below assignment will set gd to point at the BEGINING of
@@ -1470,7 +1470,7 @@
 		pointer begins at 0xd10.
 	---------------------------------------------------------------------- */
 
-	gd = (struct global_data *)(memaddr + GLOBAL);
+	gd = memaddr + GLOBAL;
 
 	/* --------------------------------------------------------------------
 		XEPORTS (address 0xc22) points at the number of channels the
@@ -1493,6 +1493,7 @@
 
 	for (i = 0; i < bd->numports; i++, ch++, bc++)  { /* Begin for each port */
 		unsigned long flags;
+		u16 tseg, rseg;
 
 		ch->brdchan        = bc;
 		ch->mailbox        = gd; 
@@ -1553,50 +1554,53 @@
 			shrinkmem = 0;
 		}
 
+		tseg = readw(&bc->tseg);
+		rseg = readw(&bc->rseg);
+
 		switch (bd->type) {
 
 			case PCIXEM:
 			case PCIXRJ:
 			case PCIXR:
 				/* Cover all the 2MEG cards */
-				ch->txptr = memaddr + (((bc->tseg) << 4) & 0x1fffff);
-				ch->rxptr = memaddr + (((bc->rseg) << 4) & 0x1fffff);
-				ch->txwin = FEPWIN | ((bc->tseg) >> 11);
-				ch->rxwin = FEPWIN | ((bc->rseg) >> 11);
+				ch->txptr = memaddr + ((tseg << 4) & 0x1fffff);
+				ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff);
+				ch->txwin = FEPWIN | (tseg >> 11);
+				ch->rxwin = FEPWIN | (rseg >> 11);
 				break;
 
 			case PCXEM:
 			case EISAXEM:
 				/* Cover all the 32K windowed cards */
 				/* Mask equal to window size - 1 */
-				ch->txptr = memaddr + (((bc->tseg) << 4) & 0x7fff);
-				ch->rxptr = memaddr + (((bc->rseg) << 4) & 0x7fff);
-				ch->txwin = FEPWIN | ((bc->tseg) >> 11);
-				ch->rxwin = FEPWIN | ((bc->rseg) >> 11);
+				ch->txptr = memaddr + ((tseg << 4) & 0x7fff);
+				ch->rxptr = memaddr + ((rseg << 4) & 0x7fff);
+				ch->txwin = FEPWIN | (tseg >> 11);
+				ch->rxwin = FEPWIN | (rseg >> 11);
 				break;
 
 			case PCXEVE:
 			case PCXE:
-				ch->txptr = memaddr + (((bc->tseg - bd->memory_seg) << 4) & 0x1fff);
-				ch->txwin = FEPWIN | ((bc->tseg - bd->memory_seg) >> 9);
-				ch->rxptr = memaddr + (((bc->rseg - bd->memory_seg) << 4) & 0x1fff);
-				ch->rxwin = FEPWIN | ((bc->rseg - bd->memory_seg) >>9 );
+				ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff);
+				ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
+				ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff);
+				ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 );
 				break;
 
 			case PCXI:
 			case PC64XE:
-				ch->txptr = memaddr + ((bc->tseg - bd->memory_seg) << 4);
-				ch->rxptr = memaddr + ((bc->rseg - bd->memory_seg) << 4);
+				ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4);
+				ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4);
 				ch->txwin = ch->rxwin = 0;
 				break;
 
 		} /* End switch bd->type */
 
 		ch->txbufhead = 0;
-		ch->txbufsize = bc->tmax + 1;
+		ch->txbufsize = readw(&bc->tmax) + 1;
 	
 		ch->rxbufhead = 0;
-		ch->rxbufsize = bc->rmax + 1;
+		ch->rxbufsize = readw(&bc->rmax) + 1;
 	
 		lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2);
 
@@ -1718,11 +1722,11 @@
 static void doevent(int crd)
 { /* Begin doevent */
 
-	void *eventbuf;
+	void __iomem *eventbuf;
 	struct channel *ch, *chan0;
 	static struct tty_struct *tty;
 	struct board_info *bd;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	unsigned int tail, head;
 	int event, channel;
 	int mstat, lstat;
@@ -1817,7 +1821,7 @@
 static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
                    int byte2, int ncmds, int bytecmd)
 { /* Begin fepcmd */
-	unchar *memaddr;
+	unchar __iomem *memaddr;
 	unsigned int head, cmdTail, cmdStart, cmdMax;
 	long count;
 	int n;
@@ -2000,7 +2004,7 @@
 
 	unsigned int cmdHead;
 	struct termios *ts;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	unsigned mval, hflow, cflag, iflag;
 
 	bc = ch->brdchan;
@@ -2010,7 +2014,7 @@
 	ts = tty->termios;
 	if ((ts->c_cflag & CBAUD) == 0)  { /* Begin CBAUD detected */
 		cmdHead = readw(&bc->rin);
-		bc->rout = cmdHead;
+		writew(cmdHead, &bc->rout);
 		cmdHead = readw(&bc->tin);
 		/* Changing baud in mid-stream transmission can be wonderful */
 		/* ---------------------------------------------------------------
@@ -2116,7 +2120,7 @@
 	unchar *rptr;
 	struct termios *ts = NULL;
 	struct tty_struct *tty;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	int dataToRead, wrapgap, bytesAvailable;
 	unsigned int tail, head;
 	unsigned int wrapmask;
@@ -2154,7 +2158,7 @@
 	--------------------------------------------------------------------- */
 
 	if (!tty || !ts || !(ts->c_cflag & CREAD))  {
-		bc->rout = head;
+		writew(head, &bc->rout);
 		return;
 	}
 
@@ -2270,7 +2274,7 @@
 static int pc_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct channel *ch = (struct channel *) tty->driver_data;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	unsigned int mstat, mflag = 0;
 	unsigned long flags;
 
@@ -2351,7 +2355,7 @@
 	unsigned long flags;
 	unsigned int mflag, mstat;
 	unsigned char startc, stopc;
-	struct board_chan *bc;
+	struct board_chan __iomem *bc;
 	struct channel *ch = (struct channel *) tty->driver_data;
 	void __user *argp = (void __user *)arg;
 	
@@ -2633,7 +2637,7 @@
 		spin_lock_irqsave(&epca_lock, flags);
 		/* Just in case output was resumed because of a change in Digi-flow */
 		if (ch->statusflags & TXSTOPPED)  { /* Begin transmit resume requested */
-			struct board_chan *bc;
+			struct board_chan __iomem *bc;
 			globalwinon(ch);
 			bc = ch->brdchan;
 			if (ch->statusflags & LOWWAIT)
@@ -2727,7 +2731,7 @@
 static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
 { /* Begin setup_empty_event */
 
-	struct board_chan *bc = ch->brdchan;
+	struct board_chan __iomem *bc = ch->brdchan;
 
 	globalwinon(ch);
 	ch->statusflags |= EMPTYWAIT;
diff --git a/drivers/char/epca.h b/drivers/char/epca.h
index 20eeb5a..456d6c8 100644
--- a/drivers/char/epca.h
+++ b/drivers/char/epca.h
@@ -128,17 +128,17 @@
 	unsigned long  c_cflag;
 	unsigned long  c_lflag;
 	unsigned long  c_oflag;
-	unsigned char *txptr;
-	unsigned char *rxptr;
+	unsigned char __iomem *txptr;
+	unsigned char __iomem *rxptr;
 	unsigned char *tmp_buf;
 	struct board_info           *board;
-	struct board_chan	    *brdchan;
+	struct board_chan	    __iomem *brdchan;
 	struct digi_struct          digiext;
 	struct tty_struct           *tty;
 	wait_queue_head_t           open_wait;
 	wait_queue_head_t           close_wait;
 	struct work_struct          tqueue;
-	struct global_data 	    *mailbox;
+	struct global_data 	    __iomem *mailbox;
 };
 
 struct board_info	
@@ -149,8 +149,8 @@
 	unsigned short numports;
 	unsigned long port;
 	unsigned long membase;
-	unsigned char __iomem *re_map_port;
-	unsigned char *re_map_membase;
+	void __iomem *re_map_port;
+	void __iomem *re_map_membase;
 	unsigned long  memory_seg;
 	void ( * memwinon )	(struct board_info *, unsigned int) ;
 	void ( * memwinoff ) 	(struct board_info *, unsigned int) ;
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 8337b0f..4866fc3 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -61,6 +61,7 @@
 	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_E,"Digi International", "Digi DataFire Micro V (Europe)"},
 	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_IOM2_A,"Digi International", "Digi DataFire Micro V IOM2 (North America)"},
 	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_A,"Digi International", "Digi DataFire Micro V (North America)"},
+	{PCI_VENDOR_ID_SITECOM, PCI_DEVICE_ID_SITECOM_DC105V2, "Sitecom Europe", "DC-105 ISDN PCI"},
 	{0, 0, NULL, NULL},
 };
 
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 34b80de..bc53744 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -353,8 +353,6 @@
 
 	struct net_device_stats net_stats;
 	struct cp_extra_stats	cp_stats;
-	struct cp_dma_stats	*nic_stats;
-	dma_addr_t		nic_stats_dma;
 
 	unsigned		rx_tail		____cacheline_aligned;
 	struct cp_desc		*rx_ring;
@@ -1143,10 +1141,6 @@
 	cp->rx_ring = mem;
 	cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE];
 
-	mem += (CP_RING_BYTES - CP_STATS_SIZE);
-	cp->nic_stats = mem;
-	cp->nic_stats_dma = cp->ring_dma + (CP_RING_BYTES - CP_STATS_SIZE);
-
 	return cp_init_rings(cp);
 }
 
@@ -1187,7 +1181,6 @@
 	pci_free_consistent(cp->pdev, CP_RING_BYTES, cp->rx_ring, cp->ring_dma);
 	cp->rx_ring = NULL;
 	cp->tx_ring = NULL;
-	cp->nic_stats = NULL;
 }
 
 static int cp_open (struct net_device *dev)
@@ -1516,13 +1509,17 @@
 				  struct ethtool_stats *estats, u64 *tmp_stats)
 {
 	struct cp_private *cp = netdev_priv(dev);
+	struct cp_dma_stats *nic_stats;
+	dma_addr_t dma;
 	int i;
 
-	memset(cp->nic_stats, 0, sizeof(struct cp_dma_stats));
+	nic_stats = pci_alloc_consistent(cp->pdev, sizeof(*nic_stats), &dma);
+	if (!nic_stats)
+		return;
 
 	/* begin NIC statistics dump */
-	cpw32(StatsAddr + 4, (cp->nic_stats_dma >> 16) >> 16);
-	cpw32(StatsAddr, (cp->nic_stats_dma & 0xffffffff) | DumpStats);
+	cpw32(StatsAddr + 4, (u64)dma >> 32);
+	cpw32(StatsAddr, ((u64)dma & DMA_32BIT_MASK) | DumpStats);
 	cpr32(StatsAddr);
 
 	for (i = 0; i < 1000; i++) {
@@ -1532,24 +1529,27 @@
 	}
 	cpw32(StatsAddr, 0);
 	cpw32(StatsAddr + 4, 0);
+	cpr32(StatsAddr);
 
 	i = 0;
-	tmp_stats[i++] = le64_to_cpu(cp->nic_stats->tx_ok);
-	tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok);
-	tmp_stats[i++] = le64_to_cpu(cp->nic_stats->tx_err);
-	tmp_stats[i++] = le32_to_cpu(cp->nic_stats->rx_err);
-	tmp_stats[i++] = le16_to_cpu(cp->nic_stats->rx_fifo);
-	tmp_stats[i++] = le16_to_cpu(cp->nic_stats->frame_align);
-	tmp_stats[i++] = le32_to_cpu(cp->nic_stats->tx_ok_1col);
-	tmp_stats[i++] = le32_to_cpu(cp->nic_stats->tx_ok_mcol);
-	tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok_phys);
-	tmp_stats[i++] = le64_to_cpu(cp->nic_stats->rx_ok_bcast);
-	tmp_stats[i++] = le32_to_cpu(cp->nic_stats->rx_ok_mcast);
-	tmp_stats[i++] = le16_to_cpu(cp->nic_stats->tx_abort);
-	tmp_stats[i++] = le16_to_cpu(cp->nic_stats->tx_underrun);
+	tmp_stats[i++] = le64_to_cpu(nic_stats->tx_ok);
+	tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok);
+	tmp_stats[i++] = le64_to_cpu(nic_stats->tx_err);
+	tmp_stats[i++] = le32_to_cpu(nic_stats->rx_err);
+	tmp_stats[i++] = le16_to_cpu(nic_stats->rx_fifo);
+	tmp_stats[i++] = le16_to_cpu(nic_stats->frame_align);
+	tmp_stats[i++] = le32_to_cpu(nic_stats->tx_ok_1col);
+	tmp_stats[i++] = le32_to_cpu(nic_stats->tx_ok_mcol);
+	tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok_phys);
+	tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok_bcast);
+	tmp_stats[i++] = le32_to_cpu(nic_stats->rx_ok_mcast);
+	tmp_stats[i++] = le16_to_cpu(nic_stats->tx_abort);
+	tmp_stats[i++] = le16_to_cpu(nic_stats->tx_underrun);
 	tmp_stats[i++] = cp->cp_stats.rx_frags;
 	if (i != CP_NUM_STATS)
 		BUG();
+
+	pci_free_consistent(cp->pdev, sizeof(*nic_stats), nic_stats, dma);
 }
 
 static struct ethtool_ops cp_ethtool_ops = {
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 94c9f68..f8dedb6 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2879,6 +2879,7 @@
 		 * This target is not on a VLAN
 		 */
 		if (rt->u.dst.dev == bond->dev) {
+			ip_rt_put(rt);
 			dprintk("basa: rtdev == bond->dev: arp_send\n");
 			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
 				      bond->master_ip, 0);
@@ -2898,6 +2899,7 @@
 		}
 
 		if (vlan_id) {
+			ip_rt_put(rt);
 			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
 				      vlan->vlan_ip, vlan_id);
 			continue;
@@ -2909,6 +2911,7 @@
 			       bond->dev->name, NIPQUAD(fl.fl4_dst),
 			       rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
 		}
+		ip_rt_put(rt);
 	}
 }
 
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 4e19220..c796f41 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1817,6 +1817,10 @@
 	/* LEDs active in both modes, autosense prio = fiber */
 	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f);
 
+	/* switch off fibre autoneg */
+	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0xfc01);
+	spider_net_write_phy(card->netdev, 1, 0x0b, 0x0004);
+
 	phy->def->ops->read_link(phy);
 	pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
 		phy->speed, phy->duplex==1 ? "Full" : "Half");
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index 3a02856..2ad4797 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -24,7 +24,7 @@
 
 #include "qeth_mpc.h"
 
-#define VERSION_QETH_H 		"$Revision: 1.139 $"
+#define VERSION_QETH_H 		"$Revision: 1.142 $"
 
 #ifdef CONFIG_QETH_IPV6
 #define QETH_VERSION_IPV6 	":IPv6"
@@ -1172,7 +1172,7 @@
 qeth_realloc_buffer_pool(struct qeth_card *, int);
 
 extern int
-qeth_set_large_send(struct qeth_card *);
+qeth_set_large_send(struct qeth_card *, enum qeth_large_send_types);
 
 extern void
 qeth_fill_header(struct qeth_card *, struct qeth_hdr *,
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 79c74f3..86582cf 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -1,6 +1,6 @@
 /*
  *
- * linux/drivers/s390/net/qeth_main.c ($Revision: 1.214 $)
+ * linux/drivers/s390/net/qeth_main.c ($Revision: 1.224 $)
  *
  * Linux on zSeries OSA Express and HiperSockets support
  *
@@ -12,7 +12,7 @@
  *			  Frank Pavlic (pavlic@de.ibm.com) and
  *		 	  Thomas Spatzier <tspat@de.ibm.com>
  *
- *    $Revision: 1.214 $	 $Date: 2005/05/04 20:19:18 $
+ *    $Revision: 1.224 $	 $Date: 2005/05/04 20:19:18 $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,14 +29,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-/***
- * eye catcher; just for debugging purposes
- */
-void volatile
-qeth_eyecatcher(void)
-{
-	return;
-}
 
 #include <linux/config.h>
 #include <linux/module.h>
@@ -80,7 +72,7 @@
 #include "qeth_eddp.h"
 #include "qeth_tso.h"
 
-#define VERSION_QETH_C "$Revision: 1.214 $"
+#define VERSION_QETH_C "$Revision: 1.224 $"
 static const char *version = "qeth S/390 OSA-Express driver";
 
 /**
@@ -2759,11 +2751,9 @@
 		queue->card->perf_stats.outbound_do_qdio_start_time;
 #endif
 	if (rc){
-		QETH_DBF_SPRINTF(trace, 0, "qeth_flush_buffers: do_QDIO "
-				 "returned error (%i) on device %s.",
-				 rc, CARD_DDEV_ID(queue->card));
 		QETH_DBF_TEXT(trace, 2, "flushbuf");
 		QETH_DBF_TEXT_(trace, 2, " err%d", rc);
+		QETH_DBF_TEXT_(trace, 2, "%s", CARD_DDEV_ID(queue->card));
 		queue->card->stats.tx_errors += count;
 		/* this must not happen under normal circumstances. if it
 		 * happens something is really wrong -> recover */
@@ -2909,11 +2899,8 @@
 	QETH_DBF_TEXT(trace, 6, "qdouhdl");
 	if (status & QDIO_STATUS_LOOK_FOR_ERROR) {
 		if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION){
-			QETH_DBF_SPRINTF(trace, 2, "On device %s: "
-					 "received active check "
-				         "condition (0x%08x).",
-					 CARD_BUS_ID(card), status);
-			QETH_DBF_TEXT(trace, 2, "chkcond");
+			QETH_DBF_TEXT(trace, 2, "achkcond");
+			QETH_DBF_TEXT_(trace, 2, "%s", CARD_BUS_ID(card));
 			QETH_DBF_TEXT_(trace, 2, "%08x", status);
 			netif_stop_queue(card->dev);
 			qeth_schedule_recovery(card);
@@ -3356,26 +3343,32 @@
 static int
 qeth_halt_channels(struct qeth_card *card)
 {
-	int rc = 0;
+	int rc1 = 0, rc2=0, rc3 = 0;
 
 	QETH_DBF_TEXT(trace,3,"haltchs");
-	if ((rc = qeth_halt_channel(&card->read)))
-		return rc;
-	if ((rc = qeth_halt_channel(&card->write)))
-		return rc;
-	return  qeth_halt_channel(&card->data);
+	rc1 = qeth_halt_channel(&card->read);
+	rc2 = qeth_halt_channel(&card->write);
+	rc3 = qeth_halt_channel(&card->data);
+	if (rc1)
+		return rc1;
+	if (rc2) 
+		return rc2;
+	return rc3;
 }
 static int
 qeth_clear_channels(struct qeth_card *card)
 {
-	int rc = 0;
+	int rc1 = 0, rc2=0, rc3 = 0;
 
 	QETH_DBF_TEXT(trace,3,"clearchs");
-	if ((rc = qeth_clear_channel(&card->read)))
-		return rc;
-	if ((rc = qeth_clear_channel(&card->write)))
-		return rc;
-	return  qeth_clear_channel(&card->data);
+	rc1 = qeth_clear_channel(&card->read);
+	rc2 = qeth_clear_channel(&card->write);
+	rc3 = qeth_clear_channel(&card->data);
+	if (rc1)
+		return rc1;
+	if (rc2) 
+		return rc2;
+	return rc3;
 }
 
 static int
@@ -3445,23 +3438,23 @@
 	}
 	if ((rc = qeth_cm_enable(card))){
 		QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
-		return rc;
+		goto out_qdio;
 	}
 	if ((rc = qeth_cm_setup(card))){
 		QETH_DBF_TEXT_(setup, 2, "3err%d", rc);
-		return rc;
+		goto out_qdio;
 	}
 	if ((rc = qeth_ulp_enable(card))){
 		QETH_DBF_TEXT_(setup, 2, "4err%d", rc);
-		return rc;
+		goto out_qdio;
 	}
 	if ((rc = qeth_ulp_setup(card))){
 		QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
-		return rc;
+		goto out_qdio;
 	}
 	if ((rc = qeth_alloc_qdio_buffers(card))){
 		QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
-		return rc;
+		goto out_qdio;
 	}
 	if ((rc = qeth_qdio_establish(card))){
 		QETH_DBF_TEXT_(setup, 2, "6err%d", rc);
@@ -3795,12 +3788,16 @@
 qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
 		 struct qeth_hdr **hdr, int ipv)
 {
+	int rc;
 #ifdef CONFIG_QETH_VLAN
 	u16 *tag;
 #endif
 
 	QETH_DBF_TEXT(trace, 6, "prepskb");
 
+        rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
+        if (rc)
+                return rc;
 #ifdef CONFIG_QETH_VLAN
 	if (card->vlangrp && vlan_tx_tag_present(*skb) &&
 	    ((ipv == 6) || card->options.layer2) ) {
@@ -4251,7 +4248,8 @@
 }
 
 static inline int
-qeth_get_elements_no(struct qeth_card *card, void *hdr, struct sk_buff *skb)
+qeth_get_elements_no(struct qeth_card *card, void *hdr, 
+		     struct sk_buff *skb, int elems)
 {
 	int elements_needed = 0;
 
@@ -4261,9 +4259,10 @@
         if (elements_needed == 0 )
                 elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
                                         + skb->len) >> PAGE_SHIFT);
-        if (elements_needed > QETH_MAX_BUFFER_ELEMENTS(card)){
+	if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)){
                 PRINT_ERR("qeth_do_send_packet: invalid size of "
-                          "IP packet. Discarded.");
+                          "IP packet (Number=%d / Length=%d). Discarded.\n",
+                          (elements_needed+elems), skb->len);
                 return 0;
         }
         return elements_needed;
@@ -4275,7 +4274,7 @@
 	int ipv = 0;
 	int cast_type;
 	struct qeth_qdio_out_q *queue;
-	struct qeth_hdr *hdr;
+	struct qeth_hdr *hdr = NULL;
 	int elements_needed = 0;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
@@ -4337,9 +4336,11 @@
 			return -EINVAL;
 		}
 	} else {
-		elements_needed += qeth_get_elements_no(card,(void*) hdr, skb);
-		if (!elements_needed)
+		int elems = qeth_get_elements_no(card,(void*) hdr, skb,
+						 elements_needed);
+		if (!elems)
 			return -EINVAL;
+		elements_needed += elems;
 	}
 
 	if (card->info.type != QETH_CARD_TYPE_IQD)
@@ -4504,7 +4505,11 @@
 
 	QETH_DBF_TEXT(trace,3,"arpstnoe");
 
-	/* TODO: really not supported by GuestLAN? */
+	/*
+	 * currently GuestLAN only supports the ARP assist function
+	 * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_SET_NO_ENTRIES;
+	 * thus we say EOPNOTSUPP for this ARP function
+	 */
 	if (card->info.guestlan)
 		return -EOPNOTSUPP;
 	if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) {
@@ -4681,14 +4686,6 @@
 
 	QETH_DBF_TEXT(trace,3,"arpquery");
 
-	/*
-	 * currently GuestLAN  does only deliver all zeros on query arp,
-	 * even though arp processing is supported (according to IPA supp.
-	 * funcs flags); since all zeros is no valueable information,
-	 * we say EOPNOTSUPP for all ARP functions
-	 */
-	/*if (card->info.guestlan)
-		return -EOPNOTSUPP; */
 	if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/
 			       IPA_ARP_PROCESSING)) {
 		PRINT_WARN("ARP processing not supported "
@@ -4894,10 +4891,9 @@
 	QETH_DBF_TEXT(trace,3,"arpadent");
 
 	/*
-	 * currently GuestLAN  does only deliver all zeros on query arp,
-	 * even though arp processing is supported (according to IPA supp.
-	 * funcs flags); since all zeros is no valueable information,
-	 * we say EOPNOTSUPP for all ARP functions
+	 * currently GuestLAN only supports the ARP assist function
+	 * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_ADD_ENTRY;
+	 * thus we say EOPNOTSUPP for this ARP function
 	 */
 	if (card->info.guestlan)
 		return -EOPNOTSUPP;
@@ -4937,10 +4933,9 @@
 	QETH_DBF_TEXT(trace,3,"arprment");
 
 	/*
-	 * currently GuestLAN  does only deliver all zeros on query arp,
-	 * even though arp processing is supported (according to IPA supp.
-	 * funcs flags); since all zeros is no valueable information,
-	 * we say EOPNOTSUPP for all ARP functions
+	 * currently GuestLAN only supports the ARP assist function
+	 * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY;
+	 * thus we say EOPNOTSUPP for this ARP function
 	 */
 	if (card->info.guestlan)
 		return -EOPNOTSUPP;
@@ -4978,11 +4973,10 @@
 	QETH_DBF_TEXT(trace,3,"arpflush");
 
 	/*
-	 * currently GuestLAN  does only deliver all zeros on query arp,
-	 * even though arp processing is supported (according to IPA supp.
-	 * funcs flags); since all zeros is no valueable information,
-	 * we say EOPNOTSUPP for all ARP functions
-	 */
+	 * currently GuestLAN only supports the ARP assist function
+	 * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_FLUSH_CACHE;
+	 * thus we say EOPNOTSUPP for this ARP function
+	*/
 	if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD))
 		return -EOPNOTSUPP;
 	if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) {
@@ -7038,14 +7032,16 @@
 }
 
 int
-qeth_set_large_send(struct qeth_card *card)
+qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type)
 {
 	int rc = 0;
 
-	if (card->dev == NULL)
+	if (card->dev == NULL) {
+		card->options.large_send = type;
 		return 0;
-
+	}
 	netif_stop_queue(card->dev);
+	card->options.large_send = type;
 	switch (card->options.large_send) {
 	case QETH_LARGE_SEND_EDDP:
 		card->dev->features |= NETIF_F_TSO | NETIF_F_SG;
@@ -7066,7 +7062,6 @@
 		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
 		break;
 	}
-
 	netif_wake_queue(card->dev);
 	return rc;
 }
@@ -8257,7 +8252,6 @@
 {
 	int rc=0;
 
-	qeth_eyecatcher();
 	PRINT_INFO("loading %s (%s/%s/%s/%s/%s/%s/%s %s %s)\n",
 		   version, VERSION_QETH_C, VERSION_QETH_H,
 		   VERSION_QETH_MPC_H, VERSION_QETH_MPC_C,
@@ -8338,7 +8332,6 @@
 	printk("qeth: removed\n");
 }
 
-EXPORT_SYMBOL(qeth_eyecatcher);
 module_init(qeth_init);
 module_exit(qeth_exit);
 MODULE_AUTHOR("Frank Pavlic <pavlic@de.ibm.com>");
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 98bedb0..dda105b 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -1,6 +1,6 @@
 /*
  *
- * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.51 $)
+ * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.54 $)
  *
  * Linux on zSeries OSA Express and HiperSockets support
  * This file contains code related to sysfs.
@@ -20,7 +20,7 @@
 #include "qeth_mpc.h"
 #include "qeth_fs.h"
 
-const char *VERSION_QETH_SYS_C = "$Revision: 1.51 $";
+const char *VERSION_QETH_SYS_C = "$Revision: 1.54 $";
 
 /*****************************************************************************/
 /*                                                                           */
@@ -722,10 +722,13 @@
 
 	if (!card)
 		return -EINVAL;
+	if (card->info.type == QETH_CARD_TYPE_IQD) {
+                PRINT_WARN("Layer2 on Hipersockets is not supported! \n");
+                return -EPERM;
+        }
 
 	if (((card->state != CARD_STATE_DOWN) &&
-	     (card->state != CARD_STATE_RECOVER)) ||
-	    (card->info.type != QETH_CARD_TYPE_OSAE))
+	     (card->state != CARD_STATE_RECOVER)))
 		return -EPERM;
 
 	i = simple_strtoul(buf, &tmp, 16);
@@ -771,9 +774,7 @@
 
 	if (!card)
 		return -EINVAL;
-
 	tmp = strsep((char **) &buf, "\n");
-
 	if (!strcmp(tmp, "no")){
 		type = QETH_LARGE_SEND_NO;
 	} else if (!strcmp(tmp, "EDDP")) {
@@ -786,10 +787,8 @@
 	}
 	if (card->options.large_send == type)
 		return count;
-	card->options.large_send = type;
-	if ((rc = qeth_set_large_send(card)))
+	if ((rc = qeth_set_large_send(card, type)))	
 		return rc;
-
 	return count;
 }
 
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5cc53cd..d92273c 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2465,9 +2465,12 @@
  *
  *	LOCKING:
  *	None.  (executing in kernel thread context)
+ *
+ *	RETURNS:
+ *	Non-zero if qc completed, zero otherwise.
  */
 
-static void ata_pio_complete (struct ata_port *ap)
+static int ata_pio_complete (struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc;
 	u8 drv_stat;
@@ -2486,14 +2489,14 @@
 		if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
 			ap->pio_task_state = PIO_ST_LAST_POLL;
 			ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
-			return;
+			return 0;
 		}
 	}
 
 	drv_stat = ata_wait_idle(ap);
 	if (!ata_ok(drv_stat)) {
 		ap->pio_task_state = PIO_ST_ERR;
-		return;
+		return 0;
 	}
 
 	qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -2502,6 +2505,10 @@
 	ap->pio_task_state = PIO_ST_IDLE;
 
 	ata_poll_qc_complete(qc, drv_stat);
+
+	/* another command may start at this point */
+
+	return 1;
 }
 
 
@@ -2709,7 +2716,7 @@
 
 next_sg:
 	if (unlikely(qc->cursg >= qc->n_elem)) {
-		/* 
+		/*
 		 * The end of qc->sg is reached and the device expects
 		 * more data to transfer. In order not to overrun qc->sg
 		 * and fulfill length specified in the byte count register,
@@ -2721,7 +2728,7 @@
 		unsigned int i;
 
 		if (words) /* warning if bytes > 1 */
-			printk(KERN_WARNING "ata%u: %u bytes trailing data\n", 
+			printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
 			       ap->id, bytes);
 
 		for (i = 0; i < words; i++)
@@ -2849,9 +2856,7 @@
 	if (is_atapi_taskfile(&qc->tf)) {
 		/* no more data to transfer or unsupported ATAPI command */
 		if ((status & ATA_DRQ) == 0) {
-			ap->pio_task_state = PIO_ST_IDLE;
-
-			ata_poll_qc_complete(qc, status);
+			ap->pio_task_state = PIO_ST_LAST;
 			return;
 		}
 
@@ -2887,7 +2892,12 @@
 static void ata_pio_task(void *_data)
 {
 	struct ata_port *ap = _data;
-	unsigned long timeout = 0;
+	unsigned long timeout;
+	int qc_completed;
+
+fsm_start:
+	timeout = 0;
+	qc_completed = 0;
 
 	switch (ap->pio_task_state) {
 	case PIO_ST_IDLE:
@@ -2898,7 +2908,7 @@
 		break;
 
 	case PIO_ST_LAST:
-		ata_pio_complete(ap);
+		qc_completed = ata_pio_complete(ap);
 		break;
 
 	case PIO_ST_POLL:
@@ -2913,10 +2923,9 @@
 	}
 
 	if (timeout)
-		queue_delayed_work(ata_wq, &ap->pio_task,
-				   timeout);
-	else
-		queue_work(ata_wq, &ap->pio_task);
+		queue_delayed_work(ata_wq, &ap->pio_task, timeout);
+	else if (!qc_completed)
+		goto fsm_start;
 }
 
 static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
index 681b6a6..79c9081 100644
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ b/include/asm-arm/arch-aaec2000/memory.h
@@ -64,10 +64,6 @@
 #define NODE_MAX_MEM_SHIFT	26
 #define NODE_MAX_MEM_SIZE	(1 << NODE_MAX_MEM_SHIFT)
 
-#else
-
-#define PFN_TO_NID(addr)	(0)
-
 #endif /* CONFIG_DISCONTIGMEM */
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h
index dc4735c..45351f5 100644
--- a/include/asm-arm/arch-iop3xx/memory.h
+++ b/include/asm-arm/arch-iop3xx/memory.h
@@ -36,6 +36,4 @@
 
 #endif
 
-#define PFN_TO_NID(addr)	(0)
-
 #endif
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 75623f8..32aece0 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -370,8 +370,6 @@
 #define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
 #define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
 
-#define IXP2000_PROD_ID			GLOBAL_REG(0x00)
-
 #define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
 #define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
 #define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index c0caf3e..abdcf51 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -31,20 +31,24 @@
 
 #include <asm/system.h>		/* Pickup local_irq_ functions */
 
-static inline void ixp2000_reg_write(volatile unsigned long *reg, unsigned long val)
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
 {
-	volatile unsigned long dummy;
+	unsigned long dummy;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*reg = val;
+	*((volatile unsigned long *)reg) = val;
 	barrier();
-	dummy = *reg;
+	dummy = *((volatile unsigned long *)reg);
 	local_irq_restore(flags);
 }
 #else
-#define	ixp2000_reg_write(reg, val) (*reg = val)
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
 #endif	/* IXDP2400 || IXDP2401 */
+#define ixp2000_reg_read(reg)	(*((volatile unsigned long *)reg))
 
 /*
  * Boards may multiplex different devices on the 2nd channel of 
@@ -84,7 +88,7 @@
  */
 static inline unsigned ixp2000_has_broken_slowport(void)
 {
-	unsigned long id = *IXP2000_PROD_ID;
+	unsigned long id = *IXP2000_PRODUCT_ID;
 	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
 				      IXP2000_MIN_PROD_TYPE_MASK);
 	return (((id_prod ==
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
index 7e2fea3..c650e6f 100644
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ b/include/asm-arm/arch-lh7a40x/memory.h
@@ -85,10 +85,6 @@
        (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
 # endif
 
-#else
-
-# define PFN_TO_NID(addr)	(0)
-
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index 84f81e3..ef32d61 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -86,6 +86,5 @@
 
 #endif	/* CONFIG_ARCH_OMAP1510 */
 
-#define PHYS_TO_NID(addr) (0)
 #endif
 
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
index 217a80b..58bad97 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -67,10 +67,6 @@
 #define LOCAL_MAP_NR(addr) \
 	(((unsigned long)(addr) & 0x03ffffff) >> PAGE_SHIFT)
 
-#else
-
-#define PFN_TO_NID(addr)	(0)
-
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
index 58bda9d..6b5ac51 100644
--- a/include/asm-arm/arch-pxa/poodle.h
+++ b/include/asm-arm/arch-pxa/poodle.h
@@ -37,24 +37,25 @@
 #define POODLE_GPIO_nSD_DETECT		(9)
 #define POODLE_GPIO_MAIN_BAT_LOW	(13)
 #define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
 #define POODLE_GPIO_ADC_TEMP_ON		(21)
 #define POODLE_GPIO_BYPASS_ON		(36)
 #define POODLE_GPIO_CHRG_ON		(38)
 #define POODLE_GPIO_CHRG_FULL		(16)
 
 /* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO4
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO16
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO5
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO11
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO10
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO17
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO14
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO8
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO9
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO13
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
 
 /* SCOOP GPIOs */
 #define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
index 32d3d5b..8743ff5 100644
--- a/include/asm-arm/arch-sa1100/memory.h
+++ b/include/asm-arm/arch-sa1100/memory.h
@@ -99,10 +99,6 @@
 #define LOCAL_MAP_NR(addr) \
 	(((unsigned long)(addr) & 0x07ffffff) >> PAGE_SHIFT)
 
-#else
-
-#define PFN_TO_NID(addr)	(0)
-
 #endif
 
 #endif
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index e47bea7..a8a933a 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -160,12 +160,25 @@
 #define page_to_pfn(page)					\
 	(( (page) - page_zone(page)->zone_mem_map)		\
 	  + page_zone(page)->zone_start_pfn)
+
 #define pfn_to_page(pfn)					\
 	(PFN_TO_MAPBASE(pfn) + LOCAL_MAP_NR((pfn) << PAGE_SHIFT))
-#define pfn_valid(pfn)		(PFN_TO_NID(pfn) < MAX_NUMNODES)
+
+#define pfn_valid(pfn)						\
+	({							\
+		unsigned int nid = PFN_TO_NID(pfn);		\
+		int valid = nid < MAX_NUMNODES;			\
+		if (valid) {					\
+			pg_data_t *node = NODE_DATA(nid);	\
+			valid = (pfn - node->node_start_pfn) <	\
+				node->node_spanned_pages;	\
+		}						\
+		valid;						\
+	})
 
 #define virt_to_page(kaddr)					\
 	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
 #define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
 
 /*
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 72fe338..486d1c1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2252,6 +2252,9 @@
 
 #define PCI_VENDOR_ID_INFINICON		0x1820
 
+#define PCI_VENDOR_ID_SITECOM		0x182d
+#define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
+
 #define PCI_VENDOR_ID_TOPSPIN		0x1867
 
 #define PCI_VENDOR_ID_TDI               0x192E