| /* |
| * drivers/ata/pata_mpc52xx.c |
| * |
| * libata driver for the Freescale MPC52xx on-chip IDE interface |
| * |
| * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> |
| * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/libata.h> |
| |
| #include <asm/types.h> |
| #include <asm/prom.h> |
| #include <asm/of_platform.h> |
| #include <asm/mpc52xx.h> |
| |
| |
| #define DRV_NAME "mpc52xx_ata" |
| #define DRV_VERSION "0.1.0" |
| |
| |
| /* Private structures used by the driver */ |
| struct mpc52xx_ata_timings { |
| u32 pio1; |
| u32 pio2; |
| }; |
| |
| struct mpc52xx_ata_priv { |
| unsigned int ipb_period; |
| struct mpc52xx_ata __iomem * ata_regs; |
| int ata_irq; |
| struct mpc52xx_ata_timings timings[2]; |
| int csel; |
| }; |
| |
| |
| /* ATAPI-4 PIO specs (in ns) */ |
| static const int ataspec_t0[5] = {600, 383, 240, 180, 120}; |
| static const int ataspec_t1[5] = { 70, 50, 30, 30, 25}; |
| static const int ataspec_t2_8[5] = {290, 290, 290, 80, 70}; |
| static const int ataspec_t2_16[5] = {165, 125, 100, 80, 70}; |
| static const int ataspec_t2i[5] = { 0, 0, 0, 70, 25}; |
| static const int ataspec_t4[5] = { 30, 20, 15, 10, 10}; |
| static const int ataspec_ta[5] = { 35, 35, 35, 35, 35}; |
| |
| #define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c))) |
| |
| |
| /* Bit definitions inside the registers */ |
| #define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */ |
| #define MPC52xx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */ |
| #define MPC52xx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt in PIO */ |
| #define MPC52xx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports IORDY protocol */ |
| |
| #define MPC52xx_ATA_HOSTSTAT_TIP 0x80000000UL /* Transaction in progress */ |
| #define MPC52xx_ATA_HOSTSTAT_UREP 0x40000000UL /* UDMA Read Extended Pause */ |
| #define MPC52xx_ATA_HOSTSTAT_RERR 0x02000000UL /* Read Error */ |
| #define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */ |
| |
| #define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */ |
| |
| #define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */ |
| #define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */ |
| #define MPC52xx_ATA_DMAMODE_UDMA 0x04 /* UDMA enabled */ |
| #define MPC52xx_ATA_DMAMODE_IE 0x08 /* Enable drive interrupt to CPU in DMA mode */ |
| #define MPC52xx_ATA_DMAMODE_FE 0x10 /* FIFO Flush enable in Rx mode */ |
| #define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */ |
| #define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */ |
| |
| |
| /* Structure of the hardware registers */ |
| struct mpc52xx_ata { |
| |
| /* Host interface registers */ |
| u32 config; /* ATA + 0x00 Host configuration */ |
| u32 host_status; /* ATA + 0x04 Host controller status */ |
| u32 pio1; /* ATA + 0x08 PIO Timing 1 */ |
| u32 pio2; /* ATA + 0x0c PIO Timing 2 */ |
| u32 mdma1; /* ATA + 0x10 MDMA Timing 1 */ |
| u32 mdma2; /* ATA + 0x14 MDMA Timing 2 */ |
| u32 udma1; /* ATA + 0x18 UDMA Timing 1 */ |
| u32 udma2; /* ATA + 0x1c UDMA Timing 2 */ |
| u32 udma3; /* ATA + 0x20 UDMA Timing 3 */ |
| u32 udma4; /* ATA + 0x24 UDMA Timing 4 */ |
| u32 udma5; /* ATA + 0x28 UDMA Timing 5 */ |
| u32 share_cnt; /* ATA + 0x2c ATA share counter */ |
| u32 reserved0[3]; |
| |
| /* FIFO registers */ |
| u32 fifo_data; /* ATA + 0x3c */ |
| u8 fifo_status_frame; /* ATA + 0x40 */ |
| u8 fifo_status; /* ATA + 0x41 */ |
| u16 reserved7[1]; |
| u8 fifo_control; /* ATA + 0x44 */ |
| u8 reserved8[5]; |
| u16 fifo_alarm; /* ATA + 0x4a */ |
| u16 reserved9; |
| u16 fifo_rdp; /* ATA + 0x4e */ |
| u16 reserved10; |
| u16 fifo_wrp; /* ATA + 0x52 */ |
| u16 reserved11; |
| u16 fifo_lfrdp; /* ATA + 0x56 */ |
| u16 reserved12; |
| u16 fifo_lfwrp; /* ATA + 0x5a */ |
| |
| /* Drive TaskFile registers */ |
| u8 tf_control; /* ATA + 0x5c TASKFILE Control/Alt Status */ |
| u8 reserved13[3]; |
| u16 tf_data; /* ATA + 0x60 TASKFILE Data */ |
| u16 reserved14; |
| u8 tf_features; /* ATA + 0x64 TASKFILE Features/Error */ |
| u8 reserved15[3]; |
| u8 tf_sec_count; /* ATA + 0x68 TASKFILE Sector Count */ |
| u8 reserved16[3]; |
| u8 tf_sec_num; /* ATA + 0x6c TASKFILE Sector Number */ |
| u8 reserved17[3]; |
| u8 tf_cyl_low; /* ATA + 0x70 TASKFILE Cylinder Low */ |
| u8 reserved18[3]; |
| u8 tf_cyl_high; /* ATA + 0x74 TASKFILE Cylinder High */ |
| u8 reserved19[3]; |
| u8 tf_dev_head; /* ATA + 0x78 TASKFILE Device/Head */ |
| u8 reserved20[3]; |
| u8 tf_command; /* ATA + 0x7c TASKFILE Command/Status */ |
| u8 dma_mode; /* ATA + 0x7d ATA Host DMA Mode configuration */ |
| u8 reserved21[2]; |
| }; |
| |
| |
| /* ======================================================================== */ |
| /* Aux fns */ |
| /* ======================================================================== */ |
| |
| |
| /* MPC52xx low level hw control */ |
| |
| static int |
| mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) |
| { |
| struct mpc52xx_ata_timings *timing = &priv->timings[dev]; |
| unsigned int ipb_period = priv->ipb_period; |
| unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta; |
| |
| if ((pio<0) || (pio>4)) |
| return -EINVAL; |
| |
| t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]); |
| t1 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t1[pio]); |
| t2_8 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_8[pio]); |
| t2_16 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_16[pio]); |
| t2i = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2i[pio]); |
| t4 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t4[pio]); |
| ta = CALC_CLKCYC(ipb_period, 1000 * ataspec_ta[pio]); |
| |
| timing->pio1 = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8) | (t2i); |
| timing->pio2 = (t4 << 24) | (t1 << 16) | (ta << 8); |
| |
| return 0; |
| } |
| |
| static void |
| mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device) |
| { |
| struct mpc52xx_ata __iomem *regs = priv->ata_regs; |
| struct mpc52xx_ata_timings *timing = &priv->timings[device]; |
| |
| out_be32(®s->pio1, timing->pio1); |
| out_be32(®s->pio2, timing->pio2); |
| out_be32(®s->mdma1, 0); |
| out_be32(®s->mdma2, 0); |
| out_be32(®s->udma1, 0); |
| out_be32(®s->udma2, 0); |
| out_be32(®s->udma3, 0); |
| out_be32(®s->udma4, 0); |
| out_be32(®s->udma5, 0); |
| |
| priv->csel = device; |
| } |
| |
| static int |
| mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv) |
| { |
| struct mpc52xx_ata __iomem *regs = priv->ata_regs; |
| int tslot; |
| |
| /* Clear share_cnt (all sample code do this ...) */ |
| out_be32(®s->share_cnt, 0); |
| |
| /* Configure and reset host */ |
| out_be32(®s->config, |
| MPC52xx_ATA_HOSTCONF_IE | |
| MPC52xx_ATA_HOSTCONF_IORDY | |
| MPC52xx_ATA_HOSTCONF_SMR | |
| MPC52xx_ATA_HOSTCONF_FR); |
| |
| udelay(10); |
| |
| out_be32(®s->config, |
| MPC52xx_ATA_HOSTCONF_IE | |
| MPC52xx_ATA_HOSTCONF_IORDY); |
| |
| /* Set the time slot to 1us */ |
| tslot = CALC_CLKCYC(priv->ipb_period, 1000000); |
| out_be32(®s->share_cnt, tslot << 16 ); |
| |
| /* Init timings to PIO0 */ |
| memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings)); |
| |
| mpc52xx_ata_compute_pio_timings(priv, 0, 0); |
| mpc52xx_ata_compute_pio_timings(priv, 1, 0); |
| |
| mpc52xx_ata_apply_timings(priv, 0); |
| |
| return 0; |
| } |
| |
| |
| /* ======================================================================== */ |
| /* libata driver */ |
| /* ======================================================================== */ |
| |
| static void |
| mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| int pio, rv; |
| |
| pio = adev->pio_mode - XFER_PIO_0; |
| |
| rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio); |
| |
| if (rv) { |
| printk(KERN_ERR DRV_NAME |
| ": Trying to select invalid PIO mode %d\n", pio); |
| return; |
| } |
| |
| mpc52xx_ata_apply_timings(priv, adev->devno); |
| } |
| static void |
| mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device) |
| { |
| struct mpc52xx_ata_priv *priv = ap->host->private_data; |
| |
| if (device != priv->csel) |
| mpc52xx_ata_apply_timings(priv, device); |
| |
| ata_std_dev_select(ap,device); |
| } |
| |
| static void |
| mpc52xx_ata_error_handler(struct ata_port *ap) |
| { |
| ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL, |
| ata_std_postreset); |
| } |
| |
| |
| |
| static struct scsi_host_template mpc52xx_ata_sht = { |
| .module = THIS_MODULE, |
| .name = DRV_NAME, |
| .ioctl = ata_scsi_ioctl, |
| .queuecommand = ata_scsi_queuecmd, |
| .can_queue = ATA_DEF_QUEUE, |
| .this_id = ATA_SHT_THIS_ID, |
| .sg_tablesize = LIBATA_MAX_PRD, |
| .max_sectors = ATA_MAX_SECTORS, |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| .emulated = ATA_SHT_EMULATED, |
| .use_clustering = ATA_SHT_USE_CLUSTERING, |
| .proc_name = DRV_NAME, |
| .dma_boundary = ATA_DMA_BOUNDARY, |
| .slave_configure = ata_scsi_slave_config, |
| .bios_param = ata_std_bios_param, |
| }; |
| |
| static struct ata_port_operations mpc52xx_ata_port_ops = { |
| .port_disable = ata_port_disable, |
| .set_piomode = mpc52xx_ata_set_piomode, |
| .dev_select = mpc52xx_ata_dev_select, |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .check_status = ata_check_status, |
| .exec_command = ata_exec_command, |
| .freeze = ata_bmdma_freeze, |
| .thaw = ata_bmdma_thaw, |
| .error_handler = mpc52xx_ata_error_handler, |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .data_xfer = ata_data_xfer, |
| .irq_handler = ata_interrupt, |
| .irq_clear = ata_bmdma_irq_clear, |
| .port_start = ata_port_start, |
| }; |
| |
| static struct ata_probe_ent mpc52xx_ata_probe_ent = { |
| .port_ops = &mpc52xx_ata_port_ops, |
| .sht = &mpc52xx_ata_sht, |
| .n_ports = 1, |
| .pio_mask = 0x1f, /* Up to PIO4 */ |
| .mwdma_mask = 0x00, /* No MWDMA */ |
| .udma_mask = 0x00, /* No UDMA */ |
| .port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, |
| .irq_flags = 0, |
| }; |
| |
| static int __devinit |
| mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) |
| { |
| struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent; |
| struct ata_ioports *aio = &ae->port[0]; |
| int rv; |
| |
| INIT_LIST_HEAD(&ae->node); |
| ae->dev = dev; |
| ae->irq = priv->ata_irq; |
| |
| aio->cmd_addr = 0; /* Don't have a classic reg block */ |
| aio->altstatus_addr = &priv->ata_regs->tf_control; |
| aio->ctl_addr = &priv->ata_regs->tf_control; |
| aio->data_addr = &priv->ata_regs->tf_data; |
| aio->error_addr = &priv->ata_regs->tf_features; |
| aio->feature_addr = &priv->ata_regs->tf_features; |
| aio->nsect_addr = &priv->ata_regs->tf_sec_count; |
| aio->lbal_addr = &priv->ata_regs->tf_sec_num; |
| aio->lbam_addr = &priv->ata_regs->tf_cyl_low; |
| aio->lbah_addr = &priv->ata_regs->tf_cyl_high; |
| aio->device_addr = &priv->ata_regs->tf_dev_head; |
| aio->status_addr = &priv->ata_regs->tf_command; |
| aio->command_addr = &priv->ata_regs->tf_command; |
| |
| ae->private_data = priv; |
| |
| rv = ata_device_add(ae); |
| |
| return rv ? 0 : -EINVAL; |
| } |
| |
| static struct mpc52xx_ata_priv * |
| mpc52xx_ata_remove_one(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct mpc52xx_ata_priv *priv = host->private_data; |
| |
| ata_host_detach(host); |
| |
| return priv; |
| } |
| |
| |
| /* ======================================================================== */ |
| /* OF Platform driver */ |
| /* ======================================================================== */ |
| |
| static int __devinit |
| mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) |
| { |
| unsigned int ipb_freq; |
| struct resource res_mem; |
| int ata_irq = NO_IRQ; |
| struct mpc52xx_ata __iomem *ata_regs; |
| struct mpc52xx_ata_priv *priv; |
| int rv; |
| |
| /* Get ipb frequency */ |
| ipb_freq = mpc52xx_find_ipb_freq(op->node); |
| if (!ipb_freq) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Unable to find IPB Bus frequency\n" ); |
| return -ENODEV; |
| } |
| |
| /* Get IRQ and register */ |
| rv = of_address_to_resource(op->node, 0, &res_mem); |
| if (rv) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while parsing device node resource\n" ); |
| return rv; |
| } |
| |
| ata_irq = irq_of_parse_and_map(op->node, 0); |
| if (ata_irq == NO_IRQ) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while mapping the irq\n"); |
| return -EINVAL; |
| } |
| |
| /* Request mem region */ |
| if (!devm_request_mem_region(&op->dev, res_mem.start, |
| sizeof(struct mpc52xx_ata), DRV_NAME)) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while requesting mem region\n"); |
| rv = -EBUSY; |
| goto err; |
| } |
| |
| /* Remap registers */ |
| ata_regs = devm_ioremap(&op->dev, res_mem.start, |
| sizeof(struct mpc52xx_ata)); |
| if (!ata_regs) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while mapping register set\n"); |
| rv = -ENOMEM; |
| goto err; |
| } |
| |
| /* Prepare our private structure */ |
| priv = devm_kzalloc(&op->dev, sizeof(struct mpc52xx_ata_priv), |
| GFP_ATOMIC); |
| if (!priv) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while allocating private structure\n"); |
| rv = -ENOMEM; |
| goto err; |
| } |
| |
| priv->ipb_period = 1000000000 / (ipb_freq / 1000); |
| priv->ata_regs = ata_regs; |
| priv->ata_irq = ata_irq; |
| priv->csel = -1; |
| |
| /* Init the hw */ |
| rv = mpc52xx_ata_hw_init(priv); |
| if (rv) { |
| printk(KERN_ERR DRV_NAME ": Error during HW init\n"); |
| goto err; |
| } |
| |
| /* Register ourselves to libata */ |
| rv = mpc52xx_ata_init_one(&op->dev, priv); |
| if (rv) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Error while registering to ATA layer\n"); |
| return rv; |
| } |
| |
| /* Done */ |
| return 0; |
| |
| /* Error path */ |
| err: |
| irq_dispose_mapping(ata_irq); |
| return rv; |
| } |
| |
| static int |
| mpc52xx_ata_remove(struct of_device *op) |
| { |
| struct mpc52xx_ata_priv *priv; |
| |
| priv = mpc52xx_ata_remove_one(&op->dev); |
| irq_dispose_mapping(priv->ata_irq); |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| |
| static int |
| mpc52xx_ata_suspend(struct of_device *op, pm_message_t state) |
| { |
| return 0; /* FIXME : What to do here ? */ |
| } |
| |
| static int |
| mpc52xx_ata_resume(struct of_device *op) |
| { |
| return 0; /* FIXME : What to do here ? */ |
| } |
| |
| #endif |
| |
| |
| static struct of_device_id mpc52xx_ata_of_match[] = { |
| { |
| .compatible = "mpc5200-ata", |
| }, |
| { |
| .compatible = "mpc52xx-ata", |
| }, |
| {}, |
| }; |
| |
| |
| static struct of_platform_driver mpc52xx_ata_of_platform_driver = { |
| .owner = THIS_MODULE, |
| .name = DRV_NAME, |
| .match_table = mpc52xx_ata_of_match, |
| .probe = mpc52xx_ata_probe, |
| .remove = mpc52xx_ata_remove, |
| #ifdef CONFIG_PM |
| .suspend = mpc52xx_ata_suspend, |
| .resume = mpc52xx_ata_resume, |
| #endif |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| |
| /* ======================================================================== */ |
| /* Module */ |
| /* ======================================================================== */ |
| |
| static int __init |
| mpc52xx_ata_init(void) |
| { |
| printk(KERN_INFO "ata: MPC52xx IDE/ATA libata driver\n"); |
| return of_register_platform_driver(&mpc52xx_ata_of_platform_driver); |
| } |
| |
| static void __exit |
| mpc52xx_ata_exit(void) |
| { |
| of_unregister_platform_driver(&mpc52xx_ata_of_platform_driver); |
| } |
| |
| module_init(mpc52xx_ata_init); |
| module_exit(mpc52xx_ata_exit); |
| |
| MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); |
| MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match); |
| MODULE_VERSION(DRV_VERSION); |
| |