| /* |
| * High-level sync()-related operations |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/file.h> |
| #include <linux/fs.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/writeback.h> |
| #include <linux/syscalls.h> |
| #include <linux/linkage.h> |
| #include <linux/pagemap.h> |
| #include <linux/quotaops.h> |
| #include <linux/buffer_head.h> |
| #include "internal.h" |
| |
| #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ |
| SYNC_FILE_RANGE_WAIT_AFTER) |
| |
| /* |
| * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0) |
| * just dirties buffers with inodes so we have to submit IO for these buffers |
| * via __sync_blockdev(). This also speeds up the wait == 1 case since in that |
| * case write_inode() functions do sync_dirty_buffer() and thus effectively |
| * write one block at a time. |
| */ |
| static int __sync_filesystem(struct super_block *sb, int wait) |
| { |
| /* Avoid doing twice syncing and cache pruning for quota sync */ |
| if (!wait) |
| writeout_quota_sb(sb, -1); |
| else |
| sync_quota_sb(sb, -1); |
| sync_inodes_sb(sb, wait); |
| if (sb->s_op->sync_fs) |
| sb->s_op->sync_fs(sb, wait); |
| return __sync_blockdev(sb->s_bdev, wait); |
| } |
| |
| /* |
| * Write out and wait upon all dirty data associated with this |
| * superblock. Filesystem data as well as the underlying block |
| * device. Takes the superblock lock. |
| */ |
| int sync_filesystem(struct super_block *sb) |
| { |
| int ret; |
| |
| /* |
| * We need to be protected against the filesystem going from |
| * r/o to r/w or vice versa. |
| */ |
| WARN_ON(!rwsem_is_locked(&sb->s_umount)); |
| |
| /* |
| * No point in syncing out anything if the filesystem is read-only. |
| */ |
| if (sb->s_flags & MS_RDONLY) |
| return 0; |
| |
| ret = __sync_filesystem(sb, 0); |
| if (ret < 0) |
| return ret; |
| return __sync_filesystem(sb, 1); |
| } |
| EXPORT_SYMBOL_GPL(sync_filesystem); |
| |
| /* |
| * Sync all the data for all the filesystems (called by sys_sync() and |
| * emergency sync) |
| * |
| * This operation is careful to avoid the livelock which could easily happen |
| * if two or more filesystems are being continuously dirtied. s_need_sync |
| * is used only here. We set it against all filesystems and then clear it as |
| * we sync them. So redirtied filesystems are skipped. |
| * |
| * But if process A is currently running sync_filesystems and then process B |
| * calls sync_filesystems as well, process B will set all the s_need_sync |
| * flags again, which will cause process A to resync everything. Fix that with |
| * a local mutex. |
| */ |
| static void sync_filesystems(int wait) |
| { |
| struct super_block *sb; |
| static DEFINE_MUTEX(mutex); |
| |
| mutex_lock(&mutex); /* Could be down_interruptible */ |
| spin_lock(&sb_lock); |
| list_for_each_entry(sb, &super_blocks, s_list) |
| sb->s_need_sync = 1; |
| |
| restart: |
| list_for_each_entry(sb, &super_blocks, s_list) { |
| if (!sb->s_need_sync) |
| continue; |
| sb->s_need_sync = 0; |
| sb->s_count++; |
| spin_unlock(&sb_lock); |
| |
| down_read(&sb->s_umount); |
| if (!(sb->s_flags & MS_RDONLY) && sb->s_root) |
| __sync_filesystem(sb, wait); |
| up_read(&sb->s_umount); |
| |
| /* restart only when sb is no longer on the list */ |
| spin_lock(&sb_lock); |
| if (__put_super_and_need_restart(sb)) |
| goto restart; |
| } |
| spin_unlock(&sb_lock); |
| mutex_unlock(&mutex); |
| } |
| |
| SYSCALL_DEFINE0(sync) |
| { |
| sync_filesystems(0); |
| sync_filesystems(1); |
| if (unlikely(laptop_mode)) |
| laptop_sync_completion(); |
| return 0; |
| } |
| |
| static void do_sync_work(struct work_struct *work) |
| { |
| /* |
| * Sync twice to reduce the possibility we skipped some inodes / pages |
| * because they were temporarily locked |
| */ |
| sync_filesystems(0); |
| sync_filesystems(0); |
| printk("Emergency Sync complete\n"); |
| kfree(work); |
| } |
| |
| void emergency_sync(void) |
| { |
| struct work_struct *work; |
| |
| work = kmalloc(sizeof(*work), GFP_ATOMIC); |
| if (work) { |
| INIT_WORK(work, do_sync_work); |
| schedule_work(work); |
| } |
| } |
| |
| /* |
| * Generic function to fsync a file. |
| * |
| * filp may be NULL if called via the msync of a vma. |
| */ |
| int file_fsync(struct file *filp, struct dentry *dentry, int datasync) |
| { |
| struct inode * inode = dentry->d_inode; |
| struct super_block * sb; |
| int ret, err; |
| |
| /* sync the inode to buffers */ |
| ret = write_inode_now(inode, 0); |
| |
| /* sync the superblock to buffers */ |
| sb = inode->i_sb; |
| if (sb->s_dirt && sb->s_op->write_super) |
| sb->s_op->write_super(sb); |
| |
| /* .. finally sync the buffers to disk */ |
| err = sync_blockdev(sb->s_bdev); |
| if (!ret) |
| ret = err; |
| return ret; |
| } |
| |
| /** |
| * vfs_fsync - perform a fsync or fdatasync on a file |
| * @file: file to sync |
| * @dentry: dentry of @file |
| * @data: only perform a fdatasync operation |
| * |
| * Write back data and metadata for @file to disk. If @datasync is |
| * set only metadata needed to access modified file data is written. |
| * |
| * In case this function is called from nfsd @file may be %NULL and |
| * only @dentry is set. This can only happen when the filesystem |
| * implements the export_operations API. |
| */ |
| int vfs_fsync(struct file *file, struct dentry *dentry, int datasync) |
| { |
| const struct file_operations *fop; |
| struct address_space *mapping; |
| int err, ret; |
| |
| /* |
| * Get mapping and operations from the file in case we have |
| * as file, or get the default values for them in case we |
| * don't have a struct file available. Damn nfsd.. |
| */ |
| if (file) { |
| mapping = file->f_mapping; |
| fop = file->f_op; |
| } else { |
| mapping = dentry->d_inode->i_mapping; |
| fop = dentry->d_inode->i_fop; |
| } |
| |
| if (!fop || !fop->fsync) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = filemap_fdatawrite(mapping); |
| |
| /* |
| * We need to protect against concurrent writers, which could cause |
| * livelocks in fsync_buffers_list(). |
| */ |
| mutex_lock(&mapping->host->i_mutex); |
| err = fop->fsync(file, dentry, datasync); |
| if (!ret) |
| ret = err; |
| mutex_unlock(&mapping->host->i_mutex); |
| err = filemap_fdatawait(mapping); |
| if (!ret) |
| ret = err; |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(vfs_fsync); |
| |
| static int do_fsync(unsigned int fd, int datasync) |
| { |
| struct file *file; |
| int ret = -EBADF; |
| |
| file = fget(fd); |
| if (file) { |
| ret = vfs_fsync(file, file->f_path.dentry, datasync); |
| fput(file); |
| } |
| return ret; |
| } |
| |
| SYSCALL_DEFINE1(fsync, unsigned int, fd) |
| { |
| return do_fsync(fd, 0); |
| } |
| |
| SYSCALL_DEFINE1(fdatasync, unsigned int, fd) |
| { |
| return do_fsync(fd, 1); |
| } |
| |
| /* |
| * sys_sync_file_range() permits finely controlled syncing over a segment of |
| * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is |
| * zero then sys_sync_file_range() will operate from offset out to EOF. |
| * |
| * The flag bits are: |
| * |
| * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range |
| * before performing the write. |
| * |
| * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the |
| * range which are not presently under writeback. Note that this may block for |
| * significant periods due to exhaustion of disk request structures. |
| * |
| * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range |
| * after performing the write. |
| * |
| * Useful combinations of the flag bits are: |
| * |
| * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages |
| * in the range which were dirty on entry to sys_sync_file_range() are placed |
| * under writeout. This is a start-write-for-data-integrity operation. |
| * |
| * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which |
| * are not presently under writeout. This is an asynchronous flush-to-disk |
| * operation. Not suitable for data integrity operations. |
| * |
| * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for |
| * completion of writeout of all pages in the range. This will be used after an |
| * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait |
| * for that operation to complete and to return the result. |
| * |
| * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER: |
| * a traditional sync() operation. This is a write-for-data-integrity operation |
| * which will ensure that all pages in the range which were dirty on entry to |
| * sys_sync_file_range() are committed to disk. |
| * |
| * |
| * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any |
| * I/O errors or ENOSPC conditions and will return those to the caller, after |
| * clearing the EIO and ENOSPC flags in the address_space. |
| * |
| * It should be noted that none of these operations write out the file's |
| * metadata. So unless the application is strictly performing overwrites of |
| * already-instantiated disk blocks, there are no guarantees here that the data |
| * will be available after a crash. |
| */ |
| SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes, |
| unsigned int flags) |
| { |
| int ret; |
| struct file *file; |
| loff_t endbyte; /* inclusive */ |
| int fput_needed; |
| umode_t i_mode; |
| |
| ret = -EINVAL; |
| if (flags & ~VALID_FLAGS) |
| goto out; |
| |
| endbyte = offset + nbytes; |
| |
| if ((s64)offset < 0) |
| goto out; |
| if ((s64)endbyte < 0) |
| goto out; |
| if (endbyte < offset) |
| goto out; |
| |
| if (sizeof(pgoff_t) == 4) { |
| if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) { |
| /* |
| * The range starts outside a 32 bit machine's |
| * pagecache addressing capabilities. Let it "succeed" |
| */ |
| ret = 0; |
| goto out; |
| } |
| if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) { |
| /* |
| * Out to EOF |
| */ |
| nbytes = 0; |
| } |
| } |
| |
| if (nbytes == 0) |
| endbyte = LLONG_MAX; |
| else |
| endbyte--; /* inclusive */ |
| |
| ret = -EBADF; |
| file = fget_light(fd, &fput_needed); |
| if (!file) |
| goto out; |
| |
| i_mode = file->f_path.dentry->d_inode->i_mode; |
| ret = -ESPIPE; |
| if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) && |
| !S_ISLNK(i_mode)) |
| goto out_put; |
| |
| ret = do_sync_mapping_range(file->f_mapping, offset, endbyte, flags); |
| out_put: |
| fput_light(file, fput_needed); |
| out: |
| return ret; |
| } |
| #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS |
| asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes, |
| long flags) |
| { |
| return SYSC_sync_file_range((int) fd, offset, nbytes, |
| (unsigned int) flags); |
| } |
| SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range); |
| #endif |
| |
| /* It would be nice if people remember that not all the world's an i386 |
| when they introduce new system calls */ |
| SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags, |
| loff_t offset, loff_t nbytes) |
| { |
| return sys_sync_file_range(fd, offset, nbytes, flags); |
| } |
| #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS |
| asmlinkage long SyS_sync_file_range2(long fd, long flags, |
| loff_t offset, loff_t nbytes) |
| { |
| return SYSC_sync_file_range2((int) fd, (unsigned int) flags, |
| offset, nbytes); |
| } |
| SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2); |
| #endif |
| |
| /* |
| * `endbyte' is inclusive |
| */ |
| int do_sync_mapping_range(struct address_space *mapping, loff_t offset, |
| loff_t endbyte, unsigned int flags) |
| { |
| int ret; |
| |
| if (!mapping) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = 0; |
| if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { |
| ret = wait_on_page_writeback_range(mapping, |
| offset >> PAGE_CACHE_SHIFT, |
| endbyte >> PAGE_CACHE_SHIFT); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (flags & SYNC_FILE_RANGE_WRITE) { |
| ret = __filemap_fdatawrite_range(mapping, offset, endbyte, |
| WB_SYNC_ALL); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (flags & SYNC_FILE_RANGE_WAIT_AFTER) { |
| ret = wait_on_page_writeback_range(mapping, |
| offset >> PAGE_CACHE_SHIFT, |
| endbyte >> PAGE_CACHE_SHIFT); |
| } |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(do_sync_mapping_range); |