USB: msm_otg: Add support to pass VDDCX voting
Discrete voltages and corner values for voting VDDCX might
change from platform to platform. Hence add support for passing
either voltage values or corner values from device tree.
Change-Id: Ib14151e53260f753c707dbad3cdeec1e69875761
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c
index bd1423d..c03ca69 100644
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -95,7 +95,7 @@
static struct regulator *hsusb_3p3;
static struct regulator *hsusb_1p8;
-static struct regulator *hsusb_vddcx;
+static struct regulator *hsusb_vdd;
static struct regulator *vbus_otg;
static struct regulator *mhl_usb_hs_switch;
static struct power_supply *psy;
@@ -111,7 +111,7 @@
#endif
}
-static const int vdd_val[VDD_TYPE_MAX][VDD_VAL_MAX] = {
+static int vdd_val[VDD_TYPE_MAX][VDD_VAL_MAX] = {
{ /* VDD_CX CORNER Voting */
[VDD_NONE] = RPM_VREG_CORNER_NONE,
[VDD_MIN] = RPM_VREG_CORNER_NOMINAL,
@@ -175,7 +175,7 @@
int ret;
min_vol = vdd_val[vdd_type][!!high];
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ ret = regulator_set_voltage(hsusb_vdd, min_vol, max_vol);
if (ret) {
pr_err("%s: unable to set the voltage for regulator "
"HSUSB_VDDCX\n", __func__);
@@ -3802,6 +3802,8 @@
static int __init msm_otg_probe(struct platform_device *pdev)
{
int ret = 0;
+ int len = 0;
+ u32 tmp[3];
struct resource *res;
struct msm_otg *motg;
struct usb_phy *phy;
@@ -3958,24 +3960,40 @@
clk_prepare_enable(motg->pclk);
motg->vdd_type = VDDCX_CORNER;
- hsusb_vddcx = devm_regulator_get(motg->phy.dev, "hsusb_vdd_dig");
- if (IS_ERR(hsusb_vddcx)) {
- hsusb_vddcx = devm_regulator_get(motg->phy.dev, "HSUSB_VDDCX");
- if (IS_ERR(hsusb_vddcx)) {
+ hsusb_vdd = devm_regulator_get(motg->phy.dev, "hsusb_vdd_dig");
+ if (IS_ERR(hsusb_vdd)) {
+ hsusb_vdd = devm_regulator_get(motg->phy.dev, "HSUSB_VDDCX");
+ if (IS_ERR(hsusb_vdd)) {
dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
- ret = PTR_ERR(hsusb_vddcx);
+ ret = PTR_ERR(hsusb_vdd);
goto devote_xo_handle;
}
motg->vdd_type = VDDCX;
}
+ if (pdev->dev.of_node) {
+ of_get_property(pdev->dev.of_node,
+ "qcom,vdd-voltage-level",
+ &len);
+ if (len == sizeof(tmp)) {
+ of_property_read_u32_array(pdev->dev.of_node,
+ "qcom,vdd-voltage-level",
+ tmp, len/sizeof(*tmp));
+ vdd_val[motg->vdd_type][0] = tmp[0];
+ vdd_val[motg->vdd_type][1] = tmp[1];
+ vdd_val[motg->vdd_type][2] = tmp[2];
+ } else {
+ dev_dbg(&pdev->dev, "Using default hsusb vdd config.\n");
+ }
+ }
+
ret = msm_hsusb_config_vddcx(1);
if (ret) {
dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
goto devote_xo_handle;
}
- ret = regulator_enable(hsusb_vddcx);
+ ret = regulator_enable(hsusb_vdd);
if (ret) {
dev_err(&pdev->dev, "unable to enable the hsusb vddcx\n");
goto free_config_vddcx;
@@ -3984,7 +4002,7 @@
ret = msm_hsusb_ldo_init(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
- goto free_hsusb_vddcx;
+ goto free_hsusb_vdd;
}
if (pdata->mhl_enable) {
@@ -4167,10 +4185,10 @@
msm_hsusb_ldo_enable(motg, USB_PHY_REG_OFF);
free_ldo_init:
msm_hsusb_ldo_init(motg, 0);
-free_hsusb_vddcx:
- regulator_disable(hsusb_vddcx);
+free_hsusb_vdd:
+ regulator_disable(hsusb_vdd);
free_config_vddcx:
- regulator_set_voltage(hsusb_vddcx,
+ regulator_set_voltage(hsusb_vdd,
vdd_val[motg->vdd_type][VDD_NONE],
vdd_val[motg->vdd_type][VDD_MAX]);
devote_xo_handle:
@@ -4264,8 +4282,8 @@
}
msm_hsusb_ldo_enable(motg, USB_PHY_REG_OFF);
msm_hsusb_ldo_init(motg, 0);
- regulator_disable(hsusb_vddcx);
- regulator_set_voltage(hsusb_vddcx,
+ regulator_disable(hsusb_vdd);
+ regulator_set_voltage(hsusb_vdd,
vdd_val[motg->vdd_type][VDD_NONE],
vdd_val[motg->vdd_type][VDD_MAX]);