Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/mad: Fix race between cancel and receive completion
RDMA/amso1100: Fix && typo
RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device
IB/ehca: Activate scaling code by default
IB/ehca: Use named constant for max mtu
IB/ehca: Assure 4K alignment for firmware control blocks
diff --git a/.gitignore b/.gitignore
index e1d5c17..9eb4b77 100644
--- a/.gitignore
+++ b/.gitignore
@@ -20,6 +20,7 @@
# Top-level generic files
#
tags
+TAGS
vmlinux*
System.map
Module.symvers
diff --git a/CREDITS b/CREDITS
index 5329ead..606d407 100644
--- a/CREDITS
+++ b/CREDITS
@@ -45,7 +45,7 @@
S: Sydney, Australia
N: Tigran A. Aivazian
-E: tigran@veritas.com
+E: tigran@aivazian.fsnet.co.uk
W: http://www.moses.uklinux.net/patches
D: BFS filesystem
D: Intel IA32 CPU microcode update support
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index d882f80..dcff4d0 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -21,7 +21,7 @@
these states.
What: /sys/power/disk
-Date: August 2006
+Date: September 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/power/disk file controls the operating mode of the
@@ -39,6 +39,19 @@
'reboot' - the memory image will be saved by the kernel and
the system will be rebooted.
+ Additionally, /sys/power/disk can be used to turn on one of the
+ two testing modes of the suspend-to-disk mechanism: 'testproc'
+ or 'test'. If the suspend-to-disk mechanism is in the
+ 'testproc' mode, writing 'disk' to /sys/power/state will cause
+ the kernel to disable nonboot CPUs and freeze tasks, wait for 5
+ seconds, unfreeze tasks and enable nonboot CPUs. If it is in
+ the 'test' mode, writing 'disk' to /sys/power/state will cause
+ the kernel to disable nonboot CPUs and freeze tasks, shrink
+ memory, suspend devices, wait for 5 seconds, resume devices,
+ unfreeze tasks and enable nonboot CPUs. Then, we are able to
+ look in the log messages and work out, for example, which code
+ is being slow and which device drivers are misbehaving.
+
The suspend-to-disk method may be chosen by writing to this
file one of the accepted strings:
@@ -46,6 +59,8 @@
'platform'
'shutdown'
'reboot'
+ 'testproc'
+ 'test'
It will only change to 'firmware' or 'platform' if the system
supports that.
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 3bf5086..db9499a 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -9,7 +9,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml \
- kernel-api.xml filesystems.xml journal-api.xml lsm.xml usb.xml \
+ kernel-api.xml filesystems.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 4785032..39fa2ab 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -98,4 +98,304 @@
</sect1>
</chapter>
+ <chapter id="LinuxJDBAPI">
+ <chapterinfo>
+ <title>The Linux Journalling API</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Roger</firstname>
+ <surname>Gammans</surname>
+ <affiliation>
+ <address>
+ <email>rgammans@computer-surgery.co.uk</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <authorgroup>
+ <author>
+ <firstname>Stephen</firstname>
+ <surname>Tweedie</surname>
+ <affiliation>
+ <address>
+ <email>sct@redhat.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2002</year>
+ <holder>Roger Gammans</holder>
+ </copyright>
+ </chapterinfo>
+
+ <title>The Linux Journalling API</title>
+
+ <sect1>
+ <title>Overview</title>
+ <sect2>
+ <title>Details</title>
+<para>
+The journalling layer is easy to use. You need to
+first of all create a journal_t data structure. There are
+two calls to do this dependent on how you decide to allocate the physical
+media on which the journal resides. The journal_init_inode() call
+is for journals stored in filesystem inodes, or the journal_init_dev()
+call can be use for journal stored on a raw device (in a continuous range
+of blocks). A journal_t is a typedef for a struct pointer, so when
+you are finally finished make sure you call journal_destroy() on it
+to free up any used kernel memory.
+</para>
+
+<para>
+Once you have got your journal_t object you need to 'mount' or load the journal
+file, unless of course you haven't initialised it yet - in which case you
+need to call journal_create().
+</para>
+
+<para>
+Most of the time however your journal file will already have been created, but
+before you load it you must call journal_wipe() to empty the journal file.
+Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
+job of the client file system to detect this and skip the call to journal_wipe().
+</para>
+
+<para>
+In either case the next call should be to journal_load() which prepares the
+journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
+for you if it detects any outstanding transactions in the journal and similarly
+journal_load() will call journal_recover() if necessary.
+I would advise reading fs/ext3/super.c for examples on this stage.
+[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
+complicate the API. Or isn't a good idea for the journal layer to hide
+dirty mounts from the client fs]
+</para>
+
+<para>
+Now you can go ahead and start modifying the underlying
+filesystem. Almost.
+</para>
+
+<para>
+
+You still need to actually journal your filesystem changes, this
+is done by wrapping them into transactions. Additionally you
+also need to wrap the modification of each of the buffers
+with calls to the journal layer, so it knows what the modifications
+you are actually making are. To do this use journal_start() which
+returns a transaction handle.
+</para>
+
+<para>
+journal_start()
+and its counterpart journal_stop(), which indicates the end of a transaction
+are nestable calls, so you can reenter a transaction if necessary,
+but remember you must call journal_stop() the same number of times as
+journal_start() before the transaction is completed (or more accurately
+leaves the update phase). Ext3/VFS makes use of this feature to simplify
+quota support.
+</para>
+
+<para>
+Inside each transaction you need to wrap the modifications to the
+individual buffers (blocks). Before you start to modify a buffer you
+need to call journal_get_{create,write,undo}_access() as appropriate,
+this allows the journalling layer to copy the unmodified data if it
+needs to. After all the buffer may be part of a previously uncommitted
+transaction.
+At this point you are at last ready to modify a buffer, and once
+you are have done so you need to call journal_dirty_{meta,}data().
+Or if you've asked for access to a buffer you now know is now longer
+required to be pushed back on the device you can call journal_forget()
+in much the same way as you might have used bforget() in the past.
+</para>
+
+<para>
+A journal_flush() may be called at any time to commit and checkpoint
+all your transactions.
+</para>
+
+<para>
+Then at umount time , in your put_super() (2.4) or write_super() (2.5)
+you can then call journal_destroy() to clean up your in-core journal object.
+</para>
+
+<para>
+Unfortunately there a couple of ways the journal layer can cause a deadlock.
+The first thing to note is that each task can only have
+a single outstanding transaction at any one time, remember nothing
+commits until the outermost journal_stop(). This means
+you must complete the transaction at the end of each file/inode/address
+etc. operation you perform, so that the journalling system isn't re-entered
+on another journal. Since transactions can't be nested/batched
+across differing journals, and another filesystem other than
+yours (say ext3) may be modified in a later syscall.
+</para>
+
+<para>
+The second case to bear in mind is that journal_start() can
+block if there isn't enough space in the journal for your transaction
+(based on the passed nblocks param) - when it blocks it merely(!) needs to
+wait for transactions to complete and be committed from other tasks,
+so essentially we are waiting for journal_stop(). So to avoid
+deadlocks you must treat journal_start/stop() as if they
+were semaphores and include them in your semaphore ordering rules to prevent
+deadlocks. Note that journal_extend() has similar blocking behaviour to
+journal_start() so you can deadlock here just as easily as on journal_start().
+</para>
+
+<para>
+Try to reserve the right number of blocks the first time. ;-). This will
+be the maximum number of blocks you are going to touch in this transaction.
+I advise having a look at at least ext3_jbd.h to see the basis on which
+ext3 uses to make these decisions.
+</para>
+
+<para>
+Another wriggle to watch out for is your on-disk block allocation strategy.
+why? Because, if you undo a delete, you need to ensure you haven't reused any
+of the freed blocks in a later transaction. One simple way of doing this
+is make sure any blocks you allocate only have checkpointed transactions
+listed against them. Ext3 does this in ext3_test_allocatable().
+</para>
+
+<para>
+Lock is also providing through journal_{un,}lock_updates(),
+ext3 uses this when it wants a window with a clean and stable fs for a moment.
+eg.
+</para>
+
+<programlisting>
+
+ journal_lock_updates() //stop new stuff happening..
+ journal_flush() // checkpoint everything.
+ ..do stuff on stable fs
+ journal_unlock_updates() // carry on with filesystem use.
+</programlisting>
+
+<para>
+The opportunities for abuse and DOS attacks with this should be obvious,
+if you allow unprivileged userspace to trigger codepaths containing these
+calls.
+</para>
+
+<para>
+A new feature of jbd since 2.5.25 is commit callbacks with the new
+journal_callback_set() function you can now ask the journalling layer
+to call you back when the transaction is finally committed to disk, so that
+you can do some of your own management. The key to this is the journal_callback
+struct, this maintains the internal callback information but you can
+extend it like this:-
+</para>
+<programlisting>
+ struct myfs_callback_s {
+ //Data structure element required by jbd..
+ struct journal_callback for_jbd;
+ // Stuff for myfs allocated together.
+ myfs_inode* i_commited;
+
+ }
+</programlisting>
+
+<para>
+this would be useful if you needed to know when data was committed to a
+particular inode.
+</para>
+
+ </sect2>
+
+ <sect2>
+ <title>Summary</title>
+<para>
+Using the journal is a matter of wrapping the different context changes,
+being each mount, each modification (transaction) and each changed buffer
+to tell the journalling layer about them.
+</para>
+
+<para>
+Here is a some pseudo code to give you an idea of how it works, as
+an example.
+</para>
+
+<programlisting>
+ journal_t* my_jnrl = journal_create();
+ journal_init_{dev,inode}(jnrl,...)
+ if (clean) journal_wipe();
+ journal_load();
+
+ foreach(transaction) { /*transactions must be
+ completed before
+ a syscall returns to
+ userspace*/
+
+ handle_t * xct=journal_start(my_jnrl);
+ foreach(bh) {
+ journal_get_{create,write,undo}_access(xact,bh);
+ if ( myfs_modify(bh) ) { /* returns true
+ if makes changes */
+ journal_dirty_{meta,}data(xact,bh);
+ } else {
+ journal_forget(bh);
+ }
+ }
+ journal_stop(xct);
+ }
+ journal_destroy(my_jrnl);
+</programlisting>
+ </sect2>
+
+ </sect1>
+
+ <sect1>
+ <title>Data Types</title>
+ <para>
+ The journalling layer uses typedefs to 'hide' the concrete definitions
+ of the structures used. As a client of the JBD layer you can
+ just rely on the using the pointer as a magic cookie of some sort.
+
+ Obviously the hiding is not enforced as this is 'C'.
+ </para>
+ <sect2><title>Structures</title>
+!Iinclude/linux/jbd.h
+ </sect2>
+ </sect1>
+
+ <sect1>
+ <title>Functions</title>
+ <para>
+ The functions here are split into two groups those that
+ affect a journal as a whole, and those which are used to
+ manage transactions
+ </para>
+ <sect2><title>Journal Level</title>
+!Efs/jbd/journal.c
+!Ifs/jbd/recovery.c
+ </sect2>
+ <sect2><title>Transasction Level</title>
+!Efs/jbd/transaction.c
+ </sect2>
+ </sect1>
+ <sect1>
+ <title>See also</title>
+ <para>
+ <citation>
+ <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
+ Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
+ </ulink>
+ </citation>
+ </para>
+ <para>
+ <citation>
+ <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
+ Ext3 Journalling FileSystem, OLS 2000, Dr. Stephen Tweedie
+ </ulink>
+ </citation>
+ </para>
+ </sect1>
+
+ </chapter>
+
</book>
diff --git a/Documentation/DocBook/journal-api.tmpl b/Documentation/DocBook/journal-api.tmpl
deleted file mode 100644
index 2077f9a..0000000
--- a/Documentation/DocBook/journal-api.tmpl
+++ /dev/null
@@ -1,333 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="LinuxJBDAPI">
- <bookinfo>
- <title>The Linux Journalling API</title>
- <authorgroup>
- <author>
- <firstname>Roger</firstname>
- <surname>Gammans</surname>
- <affiliation>
- <address>
- <email>rgammans@computer-surgery.co.uk</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <authorgroup>
- <author>
- <firstname>Stephen</firstname>
- <surname>Tweedie</surname>
- <affiliation>
- <address>
- <email>sct@redhat.com</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2002</year>
- <holder>Roger Gammans</holder>
- </copyright>
-
-<legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
- <chapter id="Overview">
- <title>Overview</title>
- <sect1>
- <title>Details</title>
-<para>
-The journalling layer is easy to use. You need to
-first of all create a journal_t data structure. There are
-two calls to do this dependent on how you decide to allocate the physical
-media on which the journal resides. The journal_init_inode() call
-is for journals stored in filesystem inodes, or the journal_init_dev()
-call can be use for journal stored on a raw device (in a continuous range
-of blocks). A journal_t is a typedef for a struct pointer, so when
-you are finally finished make sure you call journal_destroy() on it
-to free up any used kernel memory.
-</para>
-
-<para>
-Once you have got your journal_t object you need to 'mount' or load the journal
-file, unless of course you haven't initialised it yet - in which case you
-need to call journal_create().
-</para>
-
-<para>
-Most of the time however your journal file will already have been created, but
-before you load it you must call journal_wipe() to empty the journal file.
-Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
-job of the client file system to detect this and skip the call to journal_wipe().
-</para>
-
-<para>
-In either case the next call should be to journal_load() which prepares the
-journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
-for you if it detects any outstanding transactions in the journal and similarly
-journal_load() will call journal_recover() if necessary.
-I would advise reading fs/ext3/super.c for examples on this stage.
-[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
-complicate the API. Or isn't a good idea for the journal layer to hide
-dirty mounts from the client fs]
-</para>
-
-<para>
-Now you can go ahead and start modifying the underlying
-filesystem. Almost.
-</para>
-
-
-<para>
-
-You still need to actually journal your filesystem changes, this
-is done by wrapping them into transactions. Additionally you
-also need to wrap the modification of each of the buffers
-with calls to the journal layer, so it knows what the modifications
-you are actually making are. To do this use journal_start() which
-returns a transaction handle.
-</para>
-
-<para>
-journal_start()
-and its counterpart journal_stop(), which indicates the end of a transaction
-are nestable calls, so you can reenter a transaction if necessary,
-but remember you must call journal_stop() the same number of times as
-journal_start() before the transaction is completed (or more accurately
-leaves the update phase). Ext3/VFS makes use of this feature to simplify
-quota support.
-</para>
-
-<para>
-Inside each transaction you need to wrap the modifications to the
-individual buffers (blocks). Before you start to modify a buffer you
-need to call journal_get_{create,write,undo}_access() as appropriate,
-this allows the journalling layer to copy the unmodified data if it
-needs to. After all the buffer may be part of a previously uncommitted
-transaction.
-At this point you are at last ready to modify a buffer, and once
-you are have done so you need to call journal_dirty_{meta,}data().
-Or if you've asked for access to a buffer you now know is now longer
-required to be pushed back on the device you can call journal_forget()
-in much the same way as you might have used bforget() in the past.
-</para>
-
-<para>
-A journal_flush() may be called at any time to commit and checkpoint
-all your transactions.
-</para>
-
-<para>
-Then at umount time , in your put_super() (2.4) or write_super() (2.5)
-you can then call journal_destroy() to clean up your in-core journal object.
-</para>
-
-
-<para>
-Unfortunately there a couple of ways the journal layer can cause a deadlock.
-The first thing to note is that each task can only have
-a single outstanding transaction at any one time, remember nothing
-commits until the outermost journal_stop(). This means
-you must complete the transaction at the end of each file/inode/address
-etc. operation you perform, so that the journalling system isn't re-entered
-on another journal. Since transactions can't be nested/batched
-across differing journals, and another filesystem other than
-yours (say ext3) may be modified in a later syscall.
-</para>
-
-<para>
-The second case to bear in mind is that journal_start() can
-block if there isn't enough space in the journal for your transaction
-(based on the passed nblocks param) - when it blocks it merely(!) needs to
-wait for transactions to complete and be committed from other tasks,
-so essentially we are waiting for journal_stop(). So to avoid
-deadlocks you must treat journal_start/stop() as if they
-were semaphores and include them in your semaphore ordering rules to prevent
-deadlocks. Note that journal_extend() has similar blocking behaviour to
-journal_start() so you can deadlock here just as easily as on journal_start().
-</para>
-
-<para>
-Try to reserve the right number of blocks the first time. ;-). This will
-be the maximum number of blocks you are going to touch in this transaction.
-I advise having a look at at least ext3_jbd.h to see the basis on which
-ext3 uses to make these decisions.
-</para>
-
-<para>
-Another wriggle to watch out for is your on-disk block allocation strategy.
-why? Because, if you undo a delete, you need to ensure you haven't reused any
-of the freed blocks in a later transaction. One simple way of doing this
-is make sure any blocks you allocate only have checkpointed transactions
-listed against them. Ext3 does this in ext3_test_allocatable().
-</para>
-
-<para>
-Lock is also providing through journal_{un,}lock_updates(),
-ext3 uses this when it wants a window with a clean and stable fs for a moment.
-eg.
-</para>
-
-<programlisting>
-
- journal_lock_updates() //stop new stuff happening..
- journal_flush() // checkpoint everything.
- ..do stuff on stable fs
- journal_unlock_updates() // carry on with filesystem use.
-</programlisting>
-
-<para>
-The opportunities for abuse and DOS attacks with this should be obvious,
-if you allow unprivileged userspace to trigger codepaths containing these
-calls.
-</para>
-
-<para>
-A new feature of jbd since 2.5.25 is commit callbacks with the new
-journal_callback_set() function you can now ask the journalling layer
-to call you back when the transaction is finally committed to disk, so that
-you can do some of your own management. The key to this is the journal_callback
-struct, this maintains the internal callback information but you can
-extend it like this:-
-</para>
-<programlisting>
- struct myfs_callback_s {
- //Data structure element required by jbd..
- struct journal_callback for_jbd;
- // Stuff for myfs allocated together.
- myfs_inode* i_commited;
-
- }
-</programlisting>
-
-<para>
-this would be useful if you needed to know when data was committed to a
-particular inode.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Summary</title>
-<para>
-Using the journal is a matter of wrapping the different context changes,
-being each mount, each modification (transaction) and each changed buffer
-to tell the journalling layer about them.
-</para>
-
-<para>
-Here is a some pseudo code to give you an idea of how it works, as
-an example.
-</para>
-
-<programlisting>
- journal_t* my_jnrl = journal_create();
- journal_init_{dev,inode}(jnrl,...)
- if (clean) journal_wipe();
- journal_load();
-
- foreach(transaction) { /*transactions must be
- completed before
- a syscall returns to
- userspace*/
-
- handle_t * xct=journal_start(my_jnrl);
- foreach(bh) {
- journal_get_{create,write,undo}_access(xact,bh);
- if ( myfs_modify(bh) ) { /* returns true
- if makes changes */
- journal_dirty_{meta,}data(xact,bh);
- } else {
- journal_forget(bh);
- }
- }
- journal_stop(xct);
- }
- journal_destroy(my_jrnl);
-</programlisting>
-</sect1>
-
-</chapter>
-
- <chapter id="adt">
- <title>Data Types</title>
- <para>
- The journalling layer uses typedefs to 'hide' the concrete definitions
- of the structures used. As a client of the JBD layer you can
- just rely on the using the pointer as a magic cookie of some sort.
-
- Obviously the hiding is not enforced as this is 'C'.
- </para>
- <sect1><title>Structures</title>
-!Iinclude/linux/jbd.h
- </sect1>
-</chapter>
-
- <chapter id="calls">
- <title>Functions</title>
- <para>
- The functions here are split into two groups those that
- affect a journal as a whole, and those which are used to
- manage transactions
-</para>
- <sect1><title>Journal Level</title>
-!Efs/jbd/journal.c
-!Ifs/jbd/recovery.c
- </sect1>
- <sect1><title>Transasction Level</title>
-!Efs/jbd/transaction.c
- </sect1>
-</chapter>
-<chapter>
- <title>See also</title>
- <para>
- <citation>
- <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
- Journaling the Linux ext2fs Filesystem,LinuxExpo 98, Stephen Tweedie
- </ulink>
- </citation>
- </para>
- <para>
- <citation>
- <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
- Ext3 Journalling FileSystem , OLS 2000, Dr. Stephen Tweedie
- </ulink>
- </citation>
- </para>
-</chapter>
-
-</book>
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index b11792a..bf2b0e2 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -49,7 +49,7 @@
}
/* Maximum size of response requested or message sent */
-#define MAX_MSG_SIZE 256
+#define MAX_MSG_SIZE 1024
/* Maximum number of cpus expected to be specified in a cpumask */
#define MAX_CPUS 32
/* Maximum length of pathname to log file */
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1ac3c74..d52c4aa 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -53,18 +53,6 @@
---------------------------
-What: sys_sysctl
-When: January 2007
-Why: The same information is available through /proc/sys and that is the
- interface user space prefers to use. And there do not appear to be
- any existing user in user space of sys_sysctl. The additional
- maintenance overhead of keeping a set of binary names gets
- in the way of doing a good job of maintaining this interface.
-
-Who: Eric Biederman <ebiederm@xmission.com>
-
----------------------------
-
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index c65233d..284e7e1 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -17,7 +17,7 @@
special place-holders for where the extracted documentation should
go.
-- scripts/docproc.c
+- scripts/basic/docproc.c
This is a program for converting SGML template files into SGML
files. When a file is referenced it is searched for symbols
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 7f790f6..7751704 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1016,7 +1016,7 @@
(*) set_mb(var, value)
- This assigns the value to the variable and then inserts at least a write
+ This assigns the value to the variable and then inserts a full memory
barrier after it, depending on the function. It isn't guaranteed to
insert anything more than a compiler barrier in a UP compilation.
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index a66bec2..74311d7 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -30,6 +30,17 @@
that is known a priori. But, the user may choose 'shutdown' or
'reboot' as alternatives.
+Additionally, /sys/power/disk can be used to turn on one of the two testing
+modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the
+suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
+/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
+tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is
+in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
+to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
+for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then,
+we are able to look in the log messages and work out, for example, which code
+is being slow and which device drivers are misbehaving.
+
Reading from this file will display what the mode is currently set
to. Writing to this file will accept one of
@@ -37,6 +48,8 @@
'platform'
'shutdown'
'reboot'
+ 'testproc'
+ 'test'
It will only change to 'firmware' or 'platform' if the system supports
it.
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 8dc2bac..50436e1 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -428,12 +428,6 @@
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
-AIRcable USB Dongle Bluetooth driver
- If there is the cdc_acm driver loaded in the system, you will find that the
- cdc_acm claims the device before AIRcable can. This is simply corrected
- by unloading both modules and then loading the aircable module before
- cdc_acm module
-
Generic Serial driver
If your device is not one of the above listed devices, compatible with
diff --git a/MAINTAINERS b/MAINTAINERS
index d708702..8732dae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -493,7 +493,7 @@
BFS FILE SYSTEM
P: Tigran A. Aivazian
-M: tigran@veritas.com
+M: tigran@aivazian.fsnet.co.uk
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -1513,7 +1513,7 @@
INTEL IA32 MICROCODE UPDATE SUPPORT
P: Tigran Aivazian
-M: tigran@veritas.com
+M: tigran@aivazian.fsnet.co.uk
S: Maintained
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
diff --git a/Makefile b/Makefile
index 9557619..8484be1 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 19
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME=Avast! A bilge rat!
# *DOCUMENTATION*
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 990ac61..f7dd081 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -2,7 +2,7 @@
* srm_env.c - Access to SRM environment
* variables through linux' procfs
*
- * Copyright (C) 2001-2002 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
*
* This driver is at all a modified version of Erik Mouw's
* Documentation/DocBook/procfs_example.c, so: thank
@@ -21,7 +21,7 @@
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more
* details.
- *
+ *
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place,
@@ -29,33 +29,6 @@
*
*/
-/*
- * Changelog
- * ~~~~~~~~~
- *
- * Thu, 22 Aug 2002 15:10:43 +0200
- * - Update Config.help entry. I got a number of emails asking
- * me to tell their senders if they could make use of this
- * piece of code... So: "SRM is something like BIOS for your
- * Alpha"
- * - Update code formatting a bit to better conform CodingStyle
- * rules.
- * - So this is v0.0.5, with no changes (except formatting)
- *
- * Wed, 22 May 2002 00:11:21 +0200
- * - Fix typo on comment (SRC -> SRM)
- * - Call this "Version 0.0.4"
- *
- * Tue, 9 Apr 2002 18:44:40 +0200
- * - Implement access by variable name and additionally
- * by number. This is done by creating two subdirectories
- * where one holds all names (like the old directory
- * did) and the other holding 256 files named like "0",
- * "1" and so on.
- * - Call this "Version 0.0.3"
- *
- */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -67,7 +40,7 @@
#define BASE_DIR "srm_environment" /* Subdir in /proc/ */
#define NAMED_DIR "named_variables" /* Subdir for known variables */
#define NUMBERED_DIR "numbered_variables" /* Subdir for all variables */
-#define VERSION "0.0.5" /* Module version */
+#define VERSION "0.0.6" /* Module version */
#define NAME "srm_env" /* Module name */
MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
@@ -106,7 +79,6 @@
static srm_env_t srm_numbered_entries[256];
-
static int
srm_env_read(char *page, char **start, off_t off, int count, int *eof,
void *data)
@@ -115,21 +87,23 @@
unsigned long ret;
srm_env_t *entry;
- if(off != 0)
- return -EFAULT;
+ if (off != 0) {
+ *eof = 1;
+ return 0;
+ }
entry = (srm_env_t *) data;
ret = callback_getenv(entry->id, page, count);
- if((ret >> 61) == 0)
+ if ((ret >> 61) == 0) {
nbytes = (int) ret;
- else
+ *eof = 1;
+ } else
nbytes = -EFAULT;
return nbytes;
}
-
static int
srm_env_write(struct file *file, const char __user *buffer, unsigned long count,
void *data)
@@ -155,7 +129,7 @@
ret1 = callback_setenv(entry->id, buf, count);
if ((ret1 >> 61) == 0) {
- do
+ do
ret2 = callback_save_env();
while((ret2 >> 61) == 1);
res = (int) ret1;
@@ -172,14 +146,14 @@
srm_env_t *entry;
unsigned long var_num;
- if(base_dir) {
+ if (base_dir) {
/*
* Remove named entries
*/
- if(named_dir) {
+ if (named_dir) {
entry = srm_named_entries;
- while(entry->name != NULL && entry->id != 0) {
- if(entry->proc_entry) {
+ while (entry->name != NULL && entry->id != 0) {
+ if (entry->proc_entry) {
remove_proc_entry(entry->name,
named_dir);
entry->proc_entry = NULL;
@@ -192,11 +166,11 @@
/*
* Remove numbered entries
*/
- if(numbered_dir) {
- for(var_num = 0; var_num <= 255; var_num++) {
+ if (numbered_dir) {
+ for (var_num = 0; var_num <= 255; var_num++) {
entry = &srm_numbered_entries[var_num];
- if(entry->proc_entry) {
+ if (entry->proc_entry) {
remove_proc_entry(entry->name,
numbered_dir);
entry->proc_entry = NULL;
@@ -212,7 +186,6 @@
return;
}
-
static int __init
srm_env_init(void)
{
@@ -222,7 +195,7 @@
/*
* Check system
*/
- if(!alpha_using_srm) {
+ if (!alpha_using_srm) {
printk(KERN_INFO "%s: This Alpha system doesn't "
"know about SRM (or you've booted "
"SRM->MILO->Linux, which gets "
@@ -233,14 +206,14 @@
/*
* Init numbers
*/
- for(var_num = 0; var_num <= 255; var_num++)
+ for (var_num = 0; var_num <= 255; var_num++)
sprintf(number[var_num], "%ld", var_num);
/*
* Create base directory
*/
base_dir = proc_mkdir(BASE_DIR, NULL);
- if(base_dir == NULL) {
+ if (!base_dir) {
printk(KERN_ERR "Couldn't create base dir /proc/%s\n",
BASE_DIR);
goto cleanup;
@@ -251,7 +224,7 @@
* Create per-name subdirectory
*/
named_dir = proc_mkdir(NAMED_DIR, base_dir);
- if(named_dir == NULL) {
+ if (!named_dir) {
printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
BASE_DIR, NAMED_DIR);
goto cleanup;
@@ -262,7 +235,7 @@
* Create per-number subdirectory
*/
numbered_dir = proc_mkdir(NUMBERED_DIR, base_dir);
- if(numbered_dir == NULL) {
+ if (!numbered_dir) {
printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
BASE_DIR, NUMBERED_DIR);
goto cleanup;
@@ -274,10 +247,10 @@
* Create all named nodes
*/
entry = srm_named_entries;
- while(entry->name != NULL && entry->id != 0) {
+ while (entry->name && entry->id) {
entry->proc_entry = create_proc_entry(entry->name,
0644, named_dir);
- if(entry->proc_entry == NULL)
+ if (!entry->proc_entry)
goto cleanup;
entry->proc_entry->data = (void *) entry;
@@ -291,13 +264,13 @@
/*
* Create all numbered nodes
*/
- for(var_num = 0; var_num <= 255; var_num++) {
+ for (var_num = 0; var_num <= 255; var_num++) {
entry = &srm_numbered_entries[var_num];
entry->name = number[var_num];
entry->proc_entry = create_proc_entry(entry->name,
0644, numbered_dir);
- if(entry->proc_entry == NULL)
+ if (!entry->proc_entry)
goto cleanup;
entry->id = var_num;
@@ -318,7 +291,6 @@
return -ENOMEM;
}
-
static void __exit
srm_env_exit(void)
{
@@ -328,7 +300,5 @@
return;
}
-
module_init(srm_env_init);
module_exit(srm_env_exit);
-
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 028bdc9..2e635b8 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -662,7 +662,8 @@
EXPORT_SYMBOL(dma_unmap_single);
EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single);
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+EXPORT_SYMBOL(dma_sync_single_for_device);
EXPORT_SYMBOL(dma_sync_sg);
EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig
deleted file mode 100644
index 4a8564f..0000000
--- a/arch/arm/configs/bast_defconfig
+++ /dev/null
@@ -1,947 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:24:16 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# S3C24XX Implementations
-#
-CONFIG_ARCH_BAST=y
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_S3C2440 is not set
-CONFIG_MACH_VR1000=y
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_CPU_S3C2410=y
-
-#
-# S3C2410 Boot
-#
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-
-#
-# S3C2410 Setup
-#
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDE_BAST=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=y
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_S3C2410_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_S3C2410_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index a832226..0563c14 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Wed Sep 20 20:27:31 2006
+# Linux kernel version: 2.6.19-rc4
+# Fri Nov 3 17:41:31 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -29,17 +30,20 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -62,7 +66,8 @@
# Loadable module support
#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -70,6 +75,7 @@
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
@@ -120,6 +126,7 @@
#
# S3C24XX Implementations
#
+# CONFIG_MACH_AML_M5900 is not set
CONFIG_MACH_ANUBIS=y
CONFIG_MACH_OSIRIS=y
CONFIG_ARCH_BAST=y
@@ -178,6 +185,8 @@
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -251,6 +260,7 @@
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_APM=y
#
@@ -266,6 +276,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -286,10 +297,12 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
@@ -377,6 +390,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -418,6 +432,8 @@
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -512,6 +528,7 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
#
# Multi-device support (RAID and LVM)
@@ -606,6 +623,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -628,6 +646,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
@@ -734,7 +753,6 @@
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_S3C2410_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -747,7 +765,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -792,12 +809,26 @@
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_S3C24XX_GPIO=m
+CONFIG_SPI_S3C24XX=m
+
+#
+# SPI Protocol Masters
+#
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -820,6 +851,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
@@ -834,6 +866,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
@@ -845,25 +878,31 @@
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
#
# LED drivers
#
+CONFIG_LEDS_S3C24XX=m
#
# LED Triggers
#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -876,6 +915,7 @@
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -951,7 +991,6 @@
#
# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1007,6 +1046,7 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -1014,11 +1054,12 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
@@ -1039,7 +1080,37 @@
# Real Time Clock
#
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
@@ -1051,6 +1122,7 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -1058,6 +1130,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
@@ -1089,6 +1162,7 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
@@ -1219,6 +1293,7 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
@@ -1238,9 +1313,10 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
@@ -1262,10 +1338,6 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
# CONFIG_CRC_CCITT is not set
diff --git a/arch/arm/configs/smdk2410_defconfig b/arch/arm/configs/smdk2410_defconfig
deleted file mode 100644
index 4d123d3..0000000
--- a/arch/arm/configs/smdk2410_defconfig
+++ /dev/null
@@ -1,735 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:42:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# S3C24XX Implementations
-#
-# CONFIG_ARCH_BAST is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-CONFIG_ARCH_SMDK2410=y
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_CPU_S3C2410=y
-
-#
-# S3C2410 Boot
-#
-
-#
-# S3C2410 Setup
-#
-# CONFIG_S3C2410_DMA is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f04 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_S3C2410_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 6bbd93d..29efc9f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -357,6 +357,9 @@
#ifndef CONFIG_VFP
elf_hwcap &= ~HWCAP_VFP;
#endif
+#ifndef CONFIG_IWMMXT
+ elf_hwcap &= ~HWCAP_IWMMXT;
+#endif
cpu_proc_init();
}
@@ -854,6 +857,7 @@
"vfp",
"edsp",
"java",
+ "iwmmxt",
NULL
};
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 0c5a609..6ff5e3f 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -220,10 +220,10 @@
#ifdef CONFIG_LEDS_TIMER
static inline void do_leds(void)
{
- static unsigned int count = 50;
+ static unsigned int count = HZ/2;
if (--count == 0) {
- count = 50;
+ count = HZ/2;
leds_event(led_timer);
}
}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index c7513f6..fbe288a 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -86,7 +86,8 @@
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
+static unsigned long long ixp4xx_irq_edge = 0;
/*
* IRQ -> GPIO mapping table
@@ -135,7 +136,11 @@
default:
return -EINVAL;
}
- ixp4xx_config_irq(irq, irq_type);
+
+ if (irq_type == IXP4XX_IRQ_EDGE)
+ ixp4xx_irq_edge |= (1 << irq);
+ else
+ ixp4xx_irq_edge &= ~(1 << irq);
if (line >= 8) { /* pins 8-15 */
line -= 8;
@@ -167,14 +172,6 @@
*IXP4XX_ICMR &= ~(1 << irq);
}
-static void ixp4xx_irq_unmask(unsigned int irq)
-{
- if (cpu_is_ixp46x() && irq >= 32)
- *IXP4XX_ICMR2 |= (1 << (irq - 32));
- else
- *IXP4XX_ICMR |= (1 << irq);
-}
-
static void ixp4xx_irq_ack(unsigned int irq)
{
int line = (irq < 32) ? irq2gpio[irq] : -1;
@@ -187,41 +184,25 @@
* Level triggered interrupts on GPIO lines can only be cleared when the
* interrupt condition disappears.
*/
-static void ixp4xx_irq_level_unmask(unsigned int irq)
+static void ixp4xx_irq_unmask(unsigned int irq)
{
- ixp4xx_irq_ack(irq);
- ixp4xx_irq_unmask(irq);
+ if (!(ixp4xx_irq_edge & (1 << irq)))
+ ixp4xx_irq_ack(irq);
+
+ if (cpu_is_ixp46x() && irq >= 32)
+ *IXP4XX_ICMR2 |= (1 << (irq - 32));
+ else
+ *IXP4XX_ICMR |= (1 << irq);
}
-static struct irqchip ixp4xx_irq_level_chip = {
- .ack = ixp4xx_irq_mask,
- .mask = ixp4xx_irq_mask,
- .unmask = ixp4xx_irq_level_unmask,
- .set_type = ixp4xx_set_irq_type,
-};
-
-static struct irqchip ixp4xx_irq_edge_chip = {
+static struct irqchip ixp4xx_irq_chip = {
+ .name = "IXP4xx",
.ack = ixp4xx_irq_ack,
.mask = ixp4xx_irq_mask,
.unmask = ixp4xx_irq_unmask,
.set_type = ixp4xx_set_irq_type,
};
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
-{
- switch (type) {
- case IXP4XX_IRQ_LEVEL:
- set_irq_chip(irq, &ixp4xx_irq_level_chip);
- set_irq_handler(irq, do_level_IRQ);
- break;
- case IXP4XX_IRQ_EDGE:
- set_irq_chip(irq, &ixp4xx_irq_edge_chip);
- set_irq_handler(irq, do_edge_IRQ);
- break;
- }
- set_irq_flags(irq, IRQF_VALID);
-}
-
void __init ixp4xx_init_irq(void)
{
int i = 0;
@@ -241,8 +222,11 @@
}
/* Default to all level triggered */
- for(i = 0; i < NR_IRQS; i++)
- ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
+ for(i = 0; i < NR_IRQS; i++) {
+ set_irq_chip(i, &ixp4xx_irq_chip);
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID);
+ }
}
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index db6393c..ba34654 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -3,7 +3,7 @@
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 GPIO support
+ * S3C24XX GPIO support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -163,3 +163,22 @@
}
EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+ if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+ return -1; /* not valid interrupts */
+
+ if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+ return -1; /* not valid pin */
+
+ if (pin < S3C2410_GPF4)
+ return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+ if (pin < S3C2410_GPG0)
+ return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+ return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
index a2098f6..ec3a276 100644
--- a/arch/arm/mach-s3c2410/s3c2410-gpio.c
+++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c
@@ -69,22 +69,3 @@
}
EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
- return -1; /* not valid interrupts */
-
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
-
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 22217fe..b5814b4 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -32,40 +32,51 @@
extern unsigned long phys_initrd_size;
/*
- * The sole use of this is to pass memory configuration
- * data from paging_init to mem_init.
+ * This is used to pass memory configuration data from paging_init
+ * to mem_init, and by show_mem() to skip holes in the memory map.
*/
-static struct meminfo meminfo __initdata = { 0, };
+static struct meminfo meminfo = { 0, };
+
+#define for_each_nodebank(iter,mi,no) \
+ for (iter = 0; iter < mi->nr_banks; iter++) \
+ if (mi->bank[iter].node == no)
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
- int shared = 0, cached = 0, slab = 0, node;
+ int shared = 0, cached = 0, slab = 0, node, i;
+ struct meminfo * mi = &meminfo;
printk("Mem-info:\n");
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(node) {
- struct page *page, *end;
+ for_each_nodebank (i,mi,node) {
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
- page = NODE_MEM_MAP(node);
- end = page + NODE_DATA(node)->node_spanned_pages;
+ pfn1 = mi->bank[i].start >> PAGE_SHIFT;
+ pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
- do {
- total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (PageSlab(page))
- slab++;
- else if (!page_count(page))
- free++;
- else
- shared += page_count(page) - 1;
- page++;
- } while (page < end);
+ page = NODE_MEM_MAP(node) + pfn1;
+ end = NODE_MEM_MAP(node) + pfn2;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
+ }
}
printk("%d pages of RAM\n", total);
@@ -76,10 +87,6 @@
printk("%d pages swap cached\n", cached);
}
-#define for_each_nodebank(iter,mi,no) \
- for (iter = 0; iter < mi->nr_banks; iter++) \
- if (mi->bank[iter].node == no)
-
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
* over the top of the initrd. Hopefully, this is located towards
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index e8b377d..2749c1f 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -909,7 +909,7 @@
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT
.long cpu_pxa270_name
.long xscale_processor_functions
.long v4wbi_tlb_fns
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 191ab85..272c011 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -21,15 +21,6 @@
struct lcdc_platform_data __initdata atstk1000_fb0_data;
-asmlinkage void __init board_early_init(void)
-{
- extern void sdram_init(void);
-
-#ifdef CONFIG_LOADER_STANDALONE
- sdram_init();
-#endif
-}
-
void __init board_setup_fbmem(unsigned long fbmem_start,
unsigned long fbmem_size)
{
diff --git a/arch/avr32/kernel/head.S b/arch/avr32/kernel/head.S
index 773b7ad..6163bd0 100644
--- a/arch/avr32/kernel/head.S
+++ b/arch/avr32/kernel/head.S
@@ -30,9 +30,6 @@
mov r7, 0
#endif
- /* Set up the PIO, SDRAM controller, early printk, etc. */
- rcall board_early_init
-
/* Start the show */
lddpc pc, kernel_start_addr
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 7589a9b..890286a 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -100,3 +100,12 @@
rcall sys_splice
sub sp, -4
popm pc
+
+ .global __sys_epoll_pwait
+ .type __sys_epoll_pwait,@function
+__sys_epoll_pwait:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_epoll_pwait
+ sub sp, -4
+ popm pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 63b2069..db8f8b5 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -286,4 +286,5 @@
.long sys_sync_file_range
.long sys_tee
.long sys_vmsplice
+ .long __sys_epoll_pwait /* 265 */
.long sys_ni_syscall /* r8 is saturated at nr_syscalls */
diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S
index 2b4856f..c6b91de 100644
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@@ -136,6 +136,7 @@
/* offset is not word-aligned. Handle the first (32 - r10) bits */
ldswp.w r8, r12[0]
sub r12, -4
+ com r8
lsr r8, r8, r10
brne .L_found
@@ -146,7 +147,7 @@
/* Main loop. offset must be word-aligned */
1: ldswp.w r8, r12[0]
- cp.w r8, 0
+ com r8
brne .L_found
sub r12, -4
sub r9, 32
diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S
index b319d5e..2be5da7 100644
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
@@ -45,3 +45,5 @@
sub r10, 1
st.b r11++, r8
brne 3b
+
+ retal r12
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ab974ff..22e4c46 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -70,7 +70,7 @@
#define PREFIX "ACPI: "
-int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
+int acpi_noirq; /* skip ACPI IRQ initialization */
int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
int acpi_ht __initdata = 1; /* enable HT */
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 507983c..ad84bc2 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2624,18 +2624,16 @@
static void target_ht_irq(unsigned int irq, unsigned int dest)
{
- u32 low, high;
- low = read_ht_irq_low(irq);
- high = read_ht_irq_high(irq);
+ struct ht_irq_msg msg;
+ fetch_ht_irq_msg(irq, &msg);
- low &= ~(HT_IRQ_LOW_DEST_ID_MASK);
- high &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+ msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
- low |= HT_IRQ_LOW_DEST_ID(dest);
- high |= HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
}
static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
@@ -2673,7 +2671,7 @@
vector = assign_irq_vector(irq);
if (vector >= 0) {
- u32 low, high;
+ struct ht_irq_msg msg;
unsigned dest;
cpumask_t tmp;
@@ -2681,9 +2679,10 @@
cpu_set(vector >> 8, tmp);
dest = cpu_mask_to_apicid(tmp);
- high = HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
- low = HT_IRQ_LOW_BASE |
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
HT_IRQ_LOW_DEST_ID(dest) |
HT_IRQ_LOW_VECTOR(vector) |
((INT_DEST_MODE == 0) ?
@@ -2695,8 +2694,7 @@
HT_IRQ_LOW_MT_ARBITRATED) |
HT_IRQ_LOW_IRQ_MASKED;
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
set_irq_chip_and_handler_name(irq, &ht_irq_chip,
handle_edge_irq, "edge");
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
index d98e44b..fc79e1e 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/i386/kernel/kprobes.c
@@ -361,8 +361,11 @@
asm volatile ( ".global kretprobe_trampoline\n"
"kretprobe_trampoline: \n"
" pushf\n"
- /* skip cs, eip, orig_eax, es, ds */
- " subl $20, %esp\n"
+ /* skip cs, eip, orig_eax */
+ " subl $12, %esp\n"
+ " pushl %gs\n"
+ " pushl %ds\n"
+ " pushl %es\n"
" pushl %eax\n"
" pushl %ebp\n"
" pushl %edi\n"
@@ -373,10 +376,10 @@
" movl %esp, %eax\n"
" call trampoline_handler\n"
/* move eflags to cs */
- " movl 48(%esp), %edx\n"
- " movl %edx, 44(%esp)\n"
+ " movl 52(%esp), %edx\n"
+ " movl %edx, 48(%esp)\n"
/* save true return address on eflags */
- " movl %eax, 48(%esp)\n"
+ " movl %eax, 52(%esp)\n"
" popl %ebx\n"
" popl %ecx\n"
" popl %edx\n"
@@ -384,8 +387,8 @@
" popl %edi\n"
" popl %ebp\n"
" popl %eax\n"
- /* skip eip, orig_eax, es, ds */
- " addl $16, %esp\n"
+ /* skip eip, orig_eax, es, ds, gs */
+ " addl $20, %esp\n"
" popf\n"
" ret\n");
}
@@ -404,6 +407,10 @@
INIT_HLIST_HEAD(&empty_rp);
spin_lock_irqsave(&kretprobe_lock, flags);
head = kretprobe_inst_table_head(current);
+ /* fixup registers */
+ regs->xcs = __KERNEL_CS;
+ regs->eip = trampoline_address;
+ regs->orig_eax = 0xffffffff;
/*
* It is possible to have multiple instances associated with a given
@@ -425,6 +432,7 @@
if (ri->rp && ri->rp->handler){
__get_cpu_var(current_kprobe) = &ri->rp->kp;
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
ri->rp->handler(ri, regs);
__get_cpu_var(current_kprobe) = NULL;
}
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
index c4d0291..23f5984 100644
--- a/arch/i386/kernel/microcode.c
+++ b/arch/i386/kernel/microcode.c
@@ -577,7 +577,7 @@
set_cpus_allowed(current, cpumask_of_cpu(cpu));
mutex_lock(µcode_mutex);
collect_cpu_info(cpu);
- if (uci->valid)
+ if (uci->valid && system_state == SYSTEM_RUNNING)
cpu_request_microcode(cpu);
mutex_unlock(µcode_mutex);
set_cpus_allowed(current, old);
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index adc1f23..c6f84a0 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@
__tracedata_end = .;
/* writeable */
+ . = ALIGN(4096);
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
*(.data)
CONSTRUCTORS
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 6d5ace8..cdfcf97 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -343,7 +343,6 @@
void pcibios_disable_device (struct pci_dev *dev)
{
- pcibios_disable_resources(dev);
if (pcibios_disable_irq)
pcibios_disable_irq(dev);
}
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
index 10154a2..9858029 100644
--- a/arch/i386/pci/i386.c
+++ b/arch/i386/pci/i386.c
@@ -242,15 +242,6 @@
return 0;
}
-void pcibios_disable_resources(struct pci_dev *dev)
-{
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index d0c3da3..c6b6d9b 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -154,38 +154,6 @@
.write = pci_mmcfg_write,
};
-
-static __init void pci_mmcfg_insert_resources(void)
-{
-#define PCI_MMCFG_RESOURCE_NAME_LEN 19
- int i;
- struct resource *res;
- char *names;
- unsigned num_buses;
-
- res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
- pci_mmcfg_config_num, GFP_KERNEL);
-
- if (!res) {
- printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
- return;
- }
-
- names = (void *)&res[pci_mmcfg_config_num];
- for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
- num_buses = pci_mmcfg_config[i].end_bus_number -
- pci_mmcfg_config[i].start_bus_number + 1;
- res->name = names;
- snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
- pci_mmcfg_config[i].pci_segment_group_number);
- res->start = pci_mmcfg_config[i].base_address;
- res->end = res->start + (num_buses << 20) - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- insert_resource(&iomem_resource, res);
- names += PCI_MMCFG_RESOURCE_NAME_LEN;
- }
-}
-
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
@@ -222,8 +190,6 @@
}
}
-
-
void __init pci_mmcfg_init(int type)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
@@ -251,5 +217,4 @@
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
- pci_mmcfg_insert_resources();
}
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index ad065ce..a0a2518 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -43,7 +43,6 @@
void pcibios_resource_survey(void);
int pcibios_enable_resources(struct pci_dev *, int);
-void pcibios_disable_resources(struct pci_dev *);
/* pci-pc.c */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 70f7eb9..683b12c 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -341,6 +341,7 @@
bool "NUMA support"
depends on !IA64_HP_SIM && !FLATMEM
default y if IA64_SGI_SN2
+ select ACPI_NUMA if ACPI
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
@@ -483,6 +484,15 @@
source "drivers/Kconfig"
+config MSPEC
+ tristate "Memory special operations driver"
+ depends on IA64
+ select IA64_UNCACHED_ALLOCATOR
+ help
+ If you have an ia64 and you want to enable memory special
+ operations support (formerly known as fetchop), say Y here,
+ otherwise say N.
+
source "fs/Kconfig"
source "lib/Kconfig"
diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c
index c83ae6a..c47eeb7 100644
--- a/arch/mips/gt64120/common/time.c
+++ b/arch/mips/gt64120/common/time.c
@@ -64,14 +64,14 @@
* as *irq (=irq0 in ../kernel/time.c). We will do our own timer interrupt
* handling.
*/
-void gt64120_time_init(void)
+void __init plat_timer_setup(struct irqaction *irq)
{
static struct irqaction timer;
/* Disable timer first */
GT_WRITE(GT_TC_CONTROL_OFS, 0);
/* Load timer value for 100 Hz */
- GT_WRITE(GT_TC3_OFS, Sys_clock / 100);
+ GT_WRITE(GT_TC3_OFS, Sys_clock / HZ);
/*
* Create the IRQ structure entry for the timer. Since we're too early
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index 91c2d3f..99c8d42 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -68,7 +68,6 @@
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
-extern void gt64120_time_init(void);
void __init plat_mem_setup(void)
{
@@ -76,7 +75,6 @@
_machine_halt = galileo_machine_halt;
pm_power_off = galileo_machine_power_off;
- board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);
}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 0e5bbee..94f94eb 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -70,7 +70,6 @@
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
-extern void gt64120_time_init(void);
extern void momenco_ocelot_irq_setup(void);
static char reset_reason;
@@ -156,8 +155,6 @@
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
- board_time_init = gt64120_time_init;
-
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index dd24434..9b0e49d 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -26,6 +26,48 @@
#include <asm/system.h>
#include <asm/uaccess.h>
+static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
+
+int __devinit allocate_irqno(void)
+{
+ int irq;
+
+again:
+ irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+ if (irq >= NR_IRQS)
+ return -ENOSPC;
+
+ if (test_and_set_bit(irq, irq_map))
+ goto again;
+
+ return irq;
+}
+
+EXPORT_SYMBOL_GPL(allocate_irqno);
+
+/*
+ * Allocate the 16 legacy interrupts for i8259 devices. This happens early
+ * in the kernel initialization so treating allocation failure as BUG() is
+ * ok.
+ */
+void __init alloc_legacy_irqno(void)
+{
+ int i;
+
+ for (i = 0; i <= 16; i++)
+ BUG_ON(test_and_set_bit(i, irq_map));
+}
+
+void __devinit free_irqno(unsigned int irq)
+{
+ smp_mb__before_clear_bit();
+ clear_bit(irq, irq_map);
+ smp_mb__after_clear_bit();
+}
+
+EXPORT_SYMBOL_GPL(free_irqno);
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index ea49a77..d0ddb4a 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -505,5 +505,5 @@
:
: "memory");
- flush_cache_all();
+ local_sb1___flush_cache_all();
}
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
index 8bcea64..d5a090a 100644
--- a/arch/mips/momentum/ocelot_3/Makefile
+++ b/arch/mips/momentum/ocelot_3/Makefile
@@ -5,4 +5,4 @@
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
-obj-y += irq.o prom.o reset.o setup.o
+obj-y += irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
index 227e429..5710a90 100644
--- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
+++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
@@ -51,7 +51,9 @@
extern unsigned long ocelot_fpga_base;
-#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y)
-#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x)
+#define __FPGA_REG_TO_ADDR(reg) \
+ ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg)
+#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
+#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
#endif
diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c
new file mode 100644
index 0000000..eefe584
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/platform.c
@@ -0,0 +1,235 @@
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_3_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+#define MV64x60_IRQ_ETH_2 50
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+#ifdef CONFIG_MV643XX_ETH_2
+
+static struct resource mv64x60_eth2_resources[] = {
+ [0] = {
+ .name = "eth2 irq",
+ .start = MV64x60_IRQ_ETH_2,
+ .end = MV64x60_IRQ_ETH_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth2_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth2_pd = {
+ .mac_addr = eth2_mac_addr,
+};
+
+static struct platform_device eth2_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth2_resources),
+ .resource = mv64x60_eth2_resources,
+ .dev = {
+ .platform_data = ð2_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_2 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ ð2_device,
+#endif
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ eth_mac_add(eth2_mac_addr, mac, 2);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index 296d945..6ce9b7f 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -34,64 +34,11 @@
extern unsigned long marvell_base;
extern unsigned long cpu_clock;
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
const char *get_system_type(void)
{
return "Momentum Ocelot-3";
}
-#ifdef CONFIG_MV643XX_ETH
-void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
@@ -228,11 +175,6 @@
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_3;
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
-
#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index 7d74f8c..ff0829f 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -4,7 +4,7 @@
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot-3 board dependent boot routines
*
- * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle
+ * Copyright (C) 1996, 1997, 01, 05 - 06 Ralf Baechle
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
index 94802b4..d69161a 100644
--- a/arch/mips/momentum/ocelot_c/Makefile
+++ b/arch/mips/momentum/ocelot_c/Makefile
@@ -2,7 +2,7 @@
# Makefile for Momentum Computer's Ocelot-C and -CS boards.
#
-obj-y += cpci-irq.o irq.o prom.o reset.o \
+obj-y += cpci-irq.o irq.o platform.o prom.o reset.o \
setup.o uart-irq.o
obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
index 7228cd1..f0f5581 100644
--- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
+++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
@@ -53,7 +53,9 @@
#define OCELOT_C_REG_INTSET 0xe
#define OCELOT_C_REG_INTCLR 0xf
-#define OCELOT_FPGA_WRITE(x, y) writeb(x, OCELOT_C_CS0_ADDR + OCELOT_C_REG_##y)
-#define OCELOT_FPGA_READ(x) readb(OCELOT_C_CS0_ADDR + OCELOT_C_REG_##x)
+#define __FPGA_REG_TO_ADDR(reg) \
+ ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg)
+#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
+#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
#endif
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
new file mode 100644
index 0000000..6c495b2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/platform.c
@@ -0,0 +1,201 @@
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_c_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+ /* The third port is not wired up on the Ocelot C */
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
index 4c50a14..d0b77e1 100644
--- a/arch/mips/momentum/ocelot_c/prom.c
+++ b/arch/mips/momentum/ocelot_c/prom.c
@@ -29,11 +29,7 @@
struct callvectors* debug_vectors;
extern unsigned long marvell_base;
-extern unsigned long cpu_clock;
-
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
+extern unsigned int cpu_clock;
const char *get_system_type(void)
{
@@ -44,55 +40,6 @@
#endif
}
-#ifdef CONFIG_MV643XX_ETH
-static void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-static u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
@@ -226,11 +173,6 @@
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_C;
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
-
#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 9c0c462..0b6b233 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -69,8 +69,7 @@
#include "ocelot_c_fpga.h"
unsigned long marvell_base;
-extern unsigned long mv64340_sram_base;
-unsigned long cpu_clock;
+unsigned int cpu_clock;
/* These functions are used for rebooting or halting the machine*/
extern void momenco_ocelot_restart(char *command);
@@ -119,7 +118,6 @@
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
marvell_base = 0xfffffffff4000000;
- mv64340_sram_base = 0xfffffffffe000000;
#else
/* marvell and extra space */
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
@@ -129,7 +127,6 @@
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
marvell_base = 0xf4000000;
- mv64340_sram_base = 0xfe000000;
#endif
}
@@ -346,22 +343,20 @@
}
}
-#ifndef CONFIG_64BIT
-/* This needs to be one of the first initcalls, because no I/O port access
- can work before this */
+/*
+ * This needs to be one of the first initcalls, because no I/O port access
+ * can work before this
+ */
static int io_base_ioremap(void)
{
- /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
- void *io_remap_range = ioremap(0xc0000000, 0x30000000);
+ void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000);
- if (!io_remap_range) {
+ if (!io_remap_range)
panic("Could not ioremap I/O port range");
- }
- printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range);
- set_io_port_base(io_remap_range - 0xc0000000);
+
+ set_io_port_base((unsigned long) io_remap_range);
return 0;
}
module_init(io_base_ioremap);
-#endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 3cf0dd4..70cb55b 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,7 +26,7 @@
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o
+obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
diff --git a/arch/mips/pci/fixup-ev64120.c b/arch/mips/pci/fixup-ev64120.c
deleted file mode 100644
index 8dbb90d..0000000
--- a/arch/mips/pci/fixup-ev64120.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/pci.h>
-#include <linux/init.h>
-
-int pci_range_ck(unsigned char bus, unsigned char dev)
-{
- if (((bus == 0) || (bus == 1)) && (dev >= 6) && (dev <= 8))
- return 0;
-
- return -1;
-}
-
-/*
- * After detecting all agents over the PCI , this function is called
- * in order to give an interrupt number for each PCI device starting
- * from IRQ 20. It does also enables master for each device.
- */
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- unsigned int irq = 20;
- struct pci_bus *current_bus = bus;
- struct pci_dev *dev;
- struct list_head *devices_link;
-
- list_for_each(devices_link, &(current_bus->devices)) {
- dev = pci_dev_b(devices_link);
- if (dev != NULL) {
- dev->irq = irq++;
-
- /* Assign an interrupt number for the device */
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
- pcibios_set_master(dev);
- }
- }
-}
diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c
new file mode 100644
index 0000000..9cd859e
--- /dev/null
+++ b/arch/mips/pci/pci-ev64120.c
@@ -0,0 +1,21 @@
+#include <linux/pci.h>
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (!pin)
+ return 0;
+
+ irq = allocate_irqno();
+ if (irq < 0)
+ return 0;
+
+ return irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index f01ba1f..270ecd3 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -354,29 +354,6 @@
.end = end_bridge_irq,
};
-static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
-
-int allocate_irqno(void)
-{
- int irq;
-
-again:
- irq = find_first_zero_bit(irq_map, NR_IRQS);
-
- if (irq >= NR_IRQS)
- return -ENOSPC;
-
- if (test_and_set_bit(irq, irq_map))
- goto again;
-
- return irq;
-}
-
-void free_irqno(unsigned int irq)
-{
- clear_bit(irq, irq_map);
-}
-
void __devinit register_bridge_irq(unsigned int irq)
{
irq_desc[irq].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index c965705..5e82a26 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -214,8 +214,6 @@
.name = "timer"
};
-extern int allocate_irqno(void);
-
void __init plat_timer_setup(struct irqaction *irq)
{
int irqno = allocate_irqno();
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2bd9b7f..0673dbe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -740,7 +740,7 @@
config ARCH_SPARSEMEM_DEFAULT
def_bool y
- depends on SMP && PPC_PSERIES
+ depends on (SMP && PPC_PSERIES) || PPC_CELL
config ARCH_POPULATES_NODE_MAP
def_bool y
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index eab7318..b5fb1fe 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -179,11 +179,11 @@
fi
if [ -n "$initrd" ]; then
- addsec $tmp "$initrd" initrd
+ addsec $tmp "$initrd" $isection
fi
if [ -n "$dtb" ]; then
- addsec $tmp "$dtb" dtb
+ addsec $tmp "$dtb" .kernel:dtb
fi
if [ "$platform" != "miboot" ]; then
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 4b6bb3f..4be3c64 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -21,6 +21,11 @@
__got2_end = .;
}
+ . = ALIGN(8);
+ _dtb_start = .;
+ .kernel:dtb : { *(.kernel:dtb) }
+ _dtb_end = .;
+
. = ALIGN(4096);
_vmlinux_start = .;
.kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 1442b63..6f6fc97 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -72,6 +72,10 @@
#define VALIDATE_BUF_SIZE 4096
#define RTAS_MSG_MAXLEN 64
+/* Quirk - RTAS requires 4k list length and block size */
+#define RTAS_BLKLIST_LENGTH 4096
+#define RTAS_BLK_SIZE 4096
+
struct flash_block {
char *data;
unsigned long length;
@@ -83,7 +87,7 @@
* into a version/length and translate the pointers
* to absolute.
*/
-#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+#define FLASH_BLOCKS_PER_NODE ((RTAS_BLKLIST_LENGTH - 16) / sizeof(struct flash_block))
struct flash_block_list {
unsigned long num_blocks;
struct flash_block_list *next;
@@ -96,6 +100,9 @@
static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+/* Use slab cache to guarantee 4k alignment */
+static kmem_cache_t *flash_block_cache = NULL;
+
#define FLASH_BLOCK_LIST_VERSION (1UL)
/* Local copy of the flash block list.
@@ -153,7 +160,7 @@
return FLASH_IMG_NULL_DATA;
}
block_size = f->blocks[i].length;
- if (block_size <= 0 || block_size > PAGE_SIZE) {
+ if (block_size <= 0 || block_size > RTAS_BLK_SIZE) {
return FLASH_IMG_BAD_LEN;
}
image_size += block_size;
@@ -177,9 +184,9 @@
while (f) {
for (i = 0; i < f->num_blocks; i++)
- free_page((unsigned long)(f->blocks[i].data));
+ kmem_cache_free(flash_block_cache, f->blocks[i].data);
next = f->next;
- free_page((unsigned long)f);
+ kmem_cache_free(flash_block_cache, f);
f = next;
}
}
@@ -278,6 +285,12 @@
return msglen;
}
+/* constructor for flash_block_cache */
+void rtas_block_ctor(void *ptr, kmem_cache_t *cache, unsigned long flags)
+{
+ memset(ptr, 0, RTAS_BLK_SIZE);
+}
+
/* We could be much more efficient here. But to keep this function
* simple we allocate a page to the block list no matter how small the
* count is. If the system is low on memory it will be just as well
@@ -302,7 +315,7 @@
* proc file
*/
if (uf->flist == NULL) {
- uf->flist = (struct flash_block_list *) get_zeroed_page(GFP_KERNEL);
+ uf->flist = kmem_cache_alloc(flash_block_cache, GFP_KERNEL);
if (!uf->flist)
return -ENOMEM;
}
@@ -313,21 +326,21 @@
next_free = fl->num_blocks;
if (next_free == FLASH_BLOCKS_PER_NODE) {
/* Need to allocate another block_list */
- fl->next = (struct flash_block_list *)get_zeroed_page(GFP_KERNEL);
+ fl->next = kmem_cache_alloc(flash_block_cache, GFP_KERNEL);
if (!fl->next)
return -ENOMEM;
fl = fl->next;
next_free = 0;
}
- if (count > PAGE_SIZE)
- count = PAGE_SIZE;
- p = (char *)get_zeroed_page(GFP_KERNEL);
+ if (count > RTAS_BLK_SIZE)
+ count = RTAS_BLK_SIZE;
+ p = kmem_cache_alloc(flash_block_cache, GFP_KERNEL);
if (!p)
return -ENOMEM;
if(copy_from_user(p, buffer, count)) {
- free_page((unsigned long)p);
+ kmem_cache_free(flash_block_cache, p);
return -EFAULT;
}
fl->blocks[next_free].data = p;
@@ -791,6 +804,16 @@
goto cleanup;
rtas_flash_term_hook = rtas_flash_firmware;
+
+ flash_block_cache = kmem_cache_create("rtas_flash_cache",
+ RTAS_BLK_SIZE, RTAS_BLK_SIZE, 0,
+ rtas_block_ctor, NULL);
+ if (!flash_block_cache) {
+ printk(KERN_ERR "%s: failed to create block cache\n",
+ __FUNCTION__);
+ rc = -ENOMEM;
+ goto cleanup;
+ }
return 0;
cleanup:
@@ -805,6 +828,10 @@
void __exit rtas_flash_cleanup(void)
{
rtas_flash_term_hook = NULL;
+
+ if (flash_block_cache)
+ kmem_cache_destroy(flash_block_cache);
+
remove_flash_pde(firmware_flash_pde);
remove_flash_pde(firmware_update_pde);
remove_flash_pde(validate_pde);
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index d0fb959..7aa809d 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -655,14 +655,19 @@
for (i=0; i < 3; i++) {
ret = of_irq_map_one(np, i, &oirq);
- if (ret)
+ if (ret) {
+ pr_debug("spu_new: failed to get irq %d\n", i);
goto err;
-
+ }
ret = -EINVAL;
+ pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0],
+ oirq.controller->full_name);
spu->irqs[i] = irq_create_of_mapping(oirq.controller,
oirq.specifier, oirq.size);
- if (spu->irqs[i] == NO_IRQ)
+ if (spu->irqs[i] == NO_IRQ) {
+ pr_debug("spu_new: failed to map it !\n");
goto err;
+ }
}
return 0;
@@ -681,7 +686,7 @@
struct resource resource = { };
int ret;
- ret = of_address_to_resource(node, 0, &resource);
+ ret = of_address_to_resource(node, nr, &resource);
if (ret)
goto out;
@@ -704,22 +709,42 @@
ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store,
&spu->local_store_phys);
- if (ret)
+ if (ret) {
+ pr_debug("spu_new: failed to map %s resource 0\n",
+ node->full_name);
goto out;
+ }
ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem,
&spu->problem_phys);
- if (ret)
+ if (ret) {
+ pr_debug("spu_new: failed to map %s resource 1\n",
+ node->full_name);
goto out_unmap;
+ }
ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2,
NULL);
- if (ret)
+ if (ret) {
+ pr_debug("spu_new: failed to map %s resource 2\n",
+ node->full_name);
goto out_unmap;
+ }
if (!firmware_has_feature(FW_FEATURE_LPAR))
ret = spu_map_resource(node, 3, (void __iomem**)&spu->priv1,
NULL);
- if (ret)
+ if (ret) {
+ pr_debug("spu_new: failed to map %s resource 3\n",
+ node->full_name);
goto out_unmap;
+ }
+ pr_debug("spu_new: %s maps:\n", node->full_name);
+ pr_debug(" local store : 0x%016lx -> 0x%p\n",
+ spu->local_store_phys, spu->local_store);
+ pr_debug(" problem state : 0x%016lx -> 0x%p\n",
+ spu->problem_phys, spu->problem);
+ pr_debug(" priv2 : 0x%p\n", spu->priv2);
+ pr_debug(" priv1 : 0x%p\n", spu->priv1);
+
return 0;
out_unmap:
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 608193c..245b81b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -236,9 +236,6 @@
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
source "mm/Kconfig"
comment "I/O subsystem configuration"
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c313e9a..7cd51e7 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -119,7 +119,6 @@
CONFIG_CHECK_STACK=y
CONFIG_STACK_GUARD=256
# CONFIG_WARN_STACK is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 49f2b68..2aa13e8 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -70,6 +70,7 @@
#define CHUNK_READ_WRITE 0
#define CHUNK_READ_ONLY 1
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
+unsigned long __initdata zholes_size[MAX_NR_ZONES];
static unsigned long __initdata memory_end;
/*
@@ -357,6 +358,21 @@
*/
void (*pm_power_off)(void) = machine_power_off;
+static void __init
+add_memory_hole(unsigned long start, unsigned long end)
+{
+ unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
+
+ if (end <= dma_pfn)
+ zholes_size[ZONE_DMA] += end - start + 1;
+ else if (start > dma_pfn)
+ zholes_size[ZONE_NORMAL] += end - start + 1;
+ else {
+ zholes_size[ZONE_DMA] += dma_pfn - start + 1;
+ zholes_size[ZONE_NORMAL] += end - dma_pfn;
+ }
+}
+
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
@@ -434,7 +450,7 @@
lc->extended_save_area_addr = (__u32)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
/* enable extended save area */
- ctl_set_bit(14, 29);
+ __ctl_set_bit(14, 29);
}
#endif
set_prefix((u32)(unsigned long) lc);
@@ -478,6 +494,7 @@
{
unsigned long bootmap_size;
unsigned long start_pfn, end_pfn, init_pfn;
+ unsigned long last_rw_end;
int i;
/*
@@ -533,27 +550,39 @@
/*
* Register RAM areas with the bootmem allocator.
*/
+ last_rw_end = start_pfn;
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
- unsigned long start_chunk, end_chunk, pfn;
+ unsigned long start_chunk, end_chunk;
if (memory_chunk[i].type != CHUNK_READ_WRITE)
continue;
- start_chunk = PFN_DOWN(memory_chunk[i].addr);
- end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1;
- end_chunk = min(end_chunk, end_pfn);
- if (start_chunk >= end_chunk)
- continue;
- add_active_range(0, start_chunk, end_chunk);
- pfn = max(start_chunk, start_pfn);
- for (; pfn <= end_chunk; pfn++)
- page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY);
+ start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1);
+ start_chunk >>= PAGE_SHIFT;
+ end_chunk = (memory_chunk[i].addr + memory_chunk[i].size);
+ end_chunk >>= PAGE_SHIFT;
+ if (start_chunk < start_pfn)
+ start_chunk = start_pfn;
+ if (end_chunk > end_pfn)
+ end_chunk = end_pfn;
+ if (start_chunk < end_chunk) {
+ /* Initialize storage key for RAM pages */
+ for (init_pfn = start_chunk ; init_pfn < end_chunk;
+ init_pfn++)
+ page_set_storage_key(init_pfn << PAGE_SHIFT,
+ PAGE_DEFAULT_KEY);
+ free_bootmem(start_chunk << PAGE_SHIFT,
+ (end_chunk - start_chunk) << PAGE_SHIFT);
+ if (last_rw_end < start_chunk)
+ add_memory_hole(last_rw_end, start_chunk - 1);
+ last_rw_end = end_chunk;
+ }
}
psw_set_key(PAGE_DEFAULT_KEY);
- free_bootmem_with_active_regions(0, max_pfn);
- reserve_bootmem(0, PFN_PHYS(start_pfn));
+ if (last_rw_end < end_pfn - 1)
+ add_memory_hole(last_rw_end, end_pfn - 1);
/*
* Reserve the bootmem bitmap itself as well. We do this in two
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index d998917..e1881c3 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -84,6 +84,7 @@
printk("%d pages swap cached\n",cached);
}
+extern unsigned long __initdata zholes_size[];
/*
* paging_init() sets up the page tables
*/
@@ -100,15 +101,16 @@
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
static const int ssm_mask = 0x04000000L;
unsigned long ro_start_pfn, ro_end_pfn;
- unsigned long max_zone_pfns[MAX_NR_ZONES];
+ unsigned long zones_size[MAX_NR_ZONES];
ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = max_low_pfn;
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init_nodes(max_zone_pfns);
+ memset(zones_size, 0, sizeof(zones_size));
+ zones_size[ZONE_DMA] = max_low_pfn;
+ free_area_init_node(0, &contig_page_data, zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT,
+ zholes_size);
/* unmap whole virtual address space */
@@ -168,16 +170,26 @@
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) |
_KERN_REGION_TABLE;
static const int ssm_mask = 0x04000000L;
+ unsigned long zones_size[MAX_NR_ZONES];
+ unsigned long dma_pfn, high_pfn;
unsigned long ro_start_pfn, ro_end_pfn;
- unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(zones_size, 0, sizeof(zones_size));
+ dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
+ high_pfn = max_low_pfn;
ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init_nodes(max_zone_pfns);
+ if (dma_pfn > high_pfn)
+ zones_size[ZONE_DMA] = high_pfn;
+ else {
+ zones_size[ZONE_DMA] = dma_pfn;
+ zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
+ }
+
+ /* Initialize mem_map[]. */
+ free_area_init_node(0, &contig_page_data, zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
/*
* map whole physical memory to virtual memory (identity mapping)
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index a4edff4..831f540 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -32,13 +32,12 @@
#include <asm/mxcc.h>
#include <asm/thread_info.h>
#include <asm/param.h>
+#include <asm/unistd.h>
#include <asm/asmmacro.h>
#define curptr g6
-#define NR_SYSCALLS 300 /* Each OS is different... */
-
/* These are just handy. */
#define _SV save %sp, -STACKFRAME_SZ, %sp
#define _RS restore
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 10df38e..ea75ca5 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -78,7 +78,7 @@
/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/ .long sys_set_robust_list, sys_get_robust_list
+/*300*/ .long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -190,6 +190,7 @@
/*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
- .long sunos_nosys, sunos_nosys, sunos_nosys
+ .long sunos_nosys
+/*300*/ .long sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 0aaa35fc..6f28bec 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -22,11 +22,10 @@
#include <asm/auxio.h>
#include <asm/sfafsr.h>
#include <asm/pil.h>
+#include <asm/unistd.h>
#define curptr g6
-#define NR_SYSCALLS 300 /* Each OS is different... */
-
.text
.align 32
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 419a63f..9a80267 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -79,7 +79,7 @@
.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
-/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list
+/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages
#endif /* CONFIG_COMPAT */
@@ -149,7 +149,7 @@
.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/ .word sys_set_robust_list, sys_get_robust_list
+/*300*/ .word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -262,5 +262,7 @@
/*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
- .word sunos_nosys, sunos_nosys, sunos_nosys
+ .word sunos_nosys
+/*300*/ .word sunos_nosys, sunos_nosys, sunos_nosys
+
#endif
diff --git a/arch/um/include/sysdep-i386/barrier.h b/arch/um/include/sysdep-i386/barrier.h
new file mode 100644
index 0000000..b58d52c
--- /dev/null
+++ b/arch/um/include/sysdep-i386/barrier.h
@@ -0,0 +1,9 @@
+#ifndef __SYSDEP_I386_BARRIER_H
+#define __SYSDEP_I386_BARRIER_H
+
+/* Copied from include/asm-i386 for use by userspace. i386 has the option
+ * of using mfence, but I'm just using this, which works everywhere, for now.
+ */
+#define mb() asm volatile("lock; addl $0,0(%esp)")
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/barrier.h b/arch/um/include/sysdep-x86_64/barrier.h
new file mode 100644
index 0000000..7b610be
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/barrier.h
@@ -0,0 +1,7 @@
+#ifndef __SYSDEP_X86_64_BARRIER_H
+#define __SYSDEP_X86_64_BARRIER_H
+
+/* Copied from include/asm-x86_64 for use by userspace. */
+#define mb() asm volatile("mfence":::"memory")
+
+#endif
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 51f0893..c692a19 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -7,7 +7,6 @@
#include <stdio.h>
#include <errno.h>
#include <signal.h>
-#include <linux/unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <sys/mman.h>
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 6b81739..b897e85 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -15,6 +15,7 @@
#include "user.h"
#include "signal_kern.h"
#include "sysdep/sigcontext.h"
+#include "sysdep/barrier.h"
#include "sigcontext.h"
#include "mode.h"
#include "os.h"
@@ -34,8 +35,12 @@
#define SIGALRM_BIT 2
#define SIGALRM_MASK (1 << SIGALRM_BIT)
-static int signals_enabled = 1;
-static int pending = 0;
+/* These are used by both the signal handlers and
+ * block/unblock_signals. I don't want modifications cached in a
+ * register - they must go straight to memory.
+ */
+static volatile int signals_enabled = 1;
+static volatile int pending = 0;
void sig_handler(int sig, struct sigcontext *sc)
{
@@ -152,6 +157,12 @@
void block_signals(void)
{
signals_enabled = 0;
+ /* This must return with signals disabled, so this barrier
+ * ensures that writes are flushed out before the return.
+ * This might matter if gcc figures out how to inline this and
+ * decides to shuffle this code into the caller.
+ */
+ mb();
}
void unblock_signals(void)
@@ -171,9 +182,23 @@
*/
signals_enabled = 1;
+ /* Setting signals_enabled and reading pending must
+ * happen in this order.
+ */
+ mb();
+
save_pending = pending;
- if(save_pending == 0)
+ if(save_pending == 0){
+ /* This must return with signals enabled, so
+ * this barrier ensures that writes are
+ * flushed out before the return. This might
+ * matter if gcc figures out how to inline
+ * this (unlikely, given its size) and decides
+ * to shuffle this code into the caller.
+ */
+ mb();
return;
+ }
pending = 0;
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index cb9ab54..9b34fe6 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -14,7 +14,7 @@
#include <sys/mman.h>
#include <sys/user.h>
#include <sys/time.h>
-#include <asm/unistd.h>
+#include <sys/syscall.h>
#include <asm/types.h>
#include "user.h"
#include "sysdep/ptrace.h"
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
index 9f7999f..16215b9 100644
--- a/arch/um/os-Linux/tls.c
+++ b/arch/um/os-Linux/tls.c
@@ -1,7 +1,7 @@
#include <errno.h>
+#include <unistd.h>
#include <sys/ptrace.h>
#include <sys/syscall.h>
-#include <unistd.h>
#include <asm/ldt.h>
#include "sysdep/tls.h"
#include "uml-config.h"
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index fe429e5..41bfc49 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -88,6 +88,52 @@
short apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
+struct io_apic {
+ unsigned int index;
+ unsigned int unused[3];
+ unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+ return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+ + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Synchronize the IO-APIC and the CPU by doing
+ * a dummy read from the IO-APIC
+ */
+static inline void io_apic_sync(unsigned int apic)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ readl(&io_apic->data);
+}
+
#define __DO_ACTION(R, ACTION, FINAL) \
\
{ \
@@ -126,12 +172,34 @@
return eu.entry;
}
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
{
unsigned long flags;
union entry_union eu;
eu.entry = e;
spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+ unsigned long flags;
+ union entry_union eu = { .entry.mask = 1 };
+
+ spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
io_apic_write(apic, 0x11 + 2*pin, eu.w2);
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -256,9 +324,7 @@
/*
* Disable it in the IO-APIC irq-routing table:
*/
- memset(&entry, 0, sizeof(entry));
- entry.mask = 1;
- ioapic_write_entry(apic, pin, entry);
+ ioapic_mask_entry(apic, pin);
}
static void clear_IO_APIC (void)
@@ -1889,18 +1955,16 @@
static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
{
- u32 low, high;
- low = read_ht_irq_low(irq);
- high = read_ht_irq_high(irq);
+ struct ht_irq_msg msg;
+ fetch_ht_irq_msg(irq, &msg);
- low &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
- high &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+ msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
- low |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
- high |= HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
}
static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
@@ -1921,7 +1985,7 @@
dest = cpu_mask_to_apicid(tmp);
- target_ht_irq(irq, dest, vector & 0xff);
+ target_ht_irq(irq, dest, vector);
set_native_irq_info(irq, mask);
}
#endif
@@ -1944,14 +2008,15 @@
vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
if (vector >= 0) {
- u32 low, high;
+ struct ht_irq_msg msg;
unsigned dest;
dest = cpu_mask_to_apicid(tmp);
- high = HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
- low = HT_IRQ_LOW_BASE |
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
HT_IRQ_LOW_DEST_ID(dest) |
HT_IRQ_LOW_VECTOR(vector) |
((INT_DEST_MODE == 0) ?
@@ -1960,10 +2025,10 @@
HT_IRQ_LOW_RQEOI_EDGE |
((INT_DELIVERY_MODE != dest_LowestPrio) ?
HT_IRQ_LOW_MT_FIXED :
- HT_IRQ_LOW_MT_ARBITRATED);
+ HT_IRQ_LOW_MT_ARBITRATED) |
+ HT_IRQ_LOW_IRQ_MASKED;
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
set_irq_chip_and_handler_name(irq, &ht_irq_chip,
handle_edge_irq, "edge");
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index c7b1dac..9eaee66 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3075,11 +3075,12 @@
if (maxsector) {
sector_t sector = bio->bi_sector;
- if (maxsector < nr_sectors || maxsector - nr_sectors < sector) {
+ if (maxsector < nr_sectors ||
+ maxsector - nr_sectors < sector) {
/*
- * This may well happen - partitions are not checked
- * to make sure they are within the size of the
- * whole device.
+ * This may well happen - partitions are not
+ * checked to make sure they are within the size
+ * of the whole device.
*/
handle_bad_sector(bio);
goto end_io;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 2dc3264..a19338e 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -246,10 +246,10 @@
switch (hdr->dxfer_direction) {
default:
return -EINVAL;
- case SG_DXFER_TO_FROM_DEV:
case SG_DXFER_TO_DEV:
writing = 1;
break;
+ case SG_DXFER_TO_FROM_DEV:
case SG_DXFER_FROM_DEV:
break;
}
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 988f8bb..234197e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -334,6 +334,14 @@
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 29234c8..5c47a9e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -677,6 +677,8 @@
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 },
{ },
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f4455a1..1c7f19a 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -230,7 +230,7 @@
int online;
/* don't do any SCR stuff if we're not loading */
- if (!ATA_PFLAG_LOADING)
+ if (!(ap->pflags & ATA_PFLAG_LOADING))
goto skip_scr;
/* Resume phy. This is the old resume sequence from
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 39a9f8c..2af12fc 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -409,14 +409,6 @@
If you have an SGI Altix with an attached SABrick
say Y or M here, otherwise say N.
-config MSPEC
- tristate "Memory special operations driver"
- depends on IA64
- help
- If you have an ia64 and you want to enable memory special
- operations support (formerly known as fetchop), say Y here,
- otherwise say N.
-
source "drivers/serial/Kconfig"
config UNIX98_PTYS
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 34a4fd1..a41b8df 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -376,13 +376,23 @@
}
}
+static void free_smi_msg_list(struct list_head *q)
+{
+ struct ipmi_smi_msg *msg, *msg2;
+
+ list_for_each_entry_safe(msg, msg2, q, link) {
+ list_del(&msg->link);
+ ipmi_free_smi_msg(msg);
+ }
+}
+
static void clean_up_interface_data(ipmi_smi_t intf)
{
int i;
struct cmd_rcvr *rcvr, *rcvr2;
struct list_head list;
- free_recv_msg_list(&intf->waiting_msgs);
+ free_smi_msg_list(&intf->waiting_msgs);
free_recv_msg_list(&intf->waiting_events);
/* Wholesale remove all the entries from the list in the
@@ -1844,7 +1854,7 @@
struct bmc_device *bmc = dev_get_drvdata(dev);
return snprintf(buf, 10, "%u\n",
- bmc->id.device_revision && 0x80 >> 7);
+ (bmc->id.device_revision & 0x80) >> 7);
}
static ssize_t revision_show(struct device *dev, struct device_attribute *attr,
@@ -1853,7 +1863,7 @@
struct bmc_device *bmc = dev_get_drvdata(dev);
return snprintf(buf, 20, "%u\n",
- bmc->id.device_revision && 0x0F);
+ bmc->id.device_revision & 0x0F);
}
static ssize_t firmware_rev_show(struct device *dev,
@@ -3232,7 +3242,9 @@
report the error immediately. */
if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
&& (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
- && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR))
+ && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)
+ && (msg->rsp[2] != IPMI_BUS_ERR)
+ && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR))
{
int chan = msg->rsp[3] & 0xf;
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e5cfb1f..abc5149 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1211,7 +1211,7 @@
static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
{
return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
@@ -1223,7 +1223,7 @@
static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
{
return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
@@ -1236,7 +1236,7 @@
static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
{
return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void mem_outq(struct si_sm_io *io, unsigned int offset,
@@ -1867,7 +1867,7 @@
static struct pci_device_id ipmi_pci_devices[] = {
{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
- { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) }
+ { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) }
};
MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 5c0dec3..235e892 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -72,7 +72,11 @@
MSPEC_UNCACHED
};
+#ifdef CONFIG_SGI_SN
static int is_sn2;
+#else
+#define is_sn2 0
+#endif
/*
* One of these structures is allocated when an mspec region is mmaped. The
@@ -211,7 +215,7 @@
if (vdata->type == MSPEC_FETCHOP)
paddr = TO_AMO(maddr);
else
- paddr = __pa(TO_CAC(maddr));
+ paddr = maddr & ~__IA64_UNCACHED_OFFSET;
pfn = paddr >> PAGE_SHIFT;
@@ -335,6 +339,7 @@
* The fetchop device only works on SN2 hardware, uncached and cached
* memory drivers should both be valid on all ia64 hardware
*/
+#ifdef CONFIG_SGI_SN
if (ia64_platform_is("sn2")) {
is_sn2 = 1;
if (is_shub2()) {
@@ -363,6 +368,7 @@
goto free_scratch_pages;
}
}
+#endif
ret = misc_register(&cached_miscdev);
if (ret) {
printk(KERN_ERR "%s: failed to register device %i\n",
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 4bde30b..75e9e38 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -230,34 +230,43 @@
*/
static int edac_sysfs_memctrl_setup(void)
{
- int err=0;
+ int err = 0;
debugf1("%s()\n", __func__);
/* create the /sys/devices/system/edac directory */
err = sysdev_class_register(&edac_class);
- if (!err) {
- /* Init the MC's kobject */
- memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj));
- edac_memctrl_kobj.parent = &edac_class.kset.kobj;
- edac_memctrl_kobj.ktype = &ktype_memctrl;
-
- /* generate sysfs "..../edac/mc" */
- err = kobject_set_name(&edac_memctrl_kobj,"mc");
-
- if (!err) {
- /* FIXME: maybe new sysdev_create_subdir() */
- err = kobject_register(&edac_memctrl_kobj);
-
- if (err)
- debugf1("Failed to register '.../edac/mc'\n");
- else
- debugf1("Registered '.../edac/mc' kobject\n");
- }
- } else
+ if (err) {
debugf1("%s() error=%d\n", __func__, err);
+ return err;
+ }
+ /* Init the MC's kobject */
+ memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj));
+ edac_memctrl_kobj.parent = &edac_class.kset.kobj;
+ edac_memctrl_kobj.ktype = &ktype_memctrl;
+
+ /* generate sysfs "..../edac/mc" */
+ err = kobject_set_name(&edac_memctrl_kobj,"mc");
+
+ if (err)
+ goto fail;
+
+ /* FIXME: maybe new sysdev_create_subdir() */
+ err = kobject_register(&edac_memctrl_kobj);
+
+ if (err) {
+ debugf1("Failed to register '.../edac/mc'\n");
+ goto fail;
+ }
+
+ debugf1("Registered '.../edac/mc' kobject\n");
+
+ return 0;
+
+fail:
+ sysdev_class_unregister(&edac_class);
return err;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index bddfebd..8821494 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -724,7 +724,7 @@
* if we have an error, pass back CHECK_CONDITION as the
* scsi status byte
*/
- if (!rq->errors)
+ if (blk_pc_request(rq) && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
/* Check for tray open. */
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2b0ea8b..753fe0e 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -75,6 +75,7 @@
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 },
{ 0 }
};
@@ -491,7 +492,8 @@
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
- /* 19 */ DECLARE_AMD_DEV("AMD5536"),
+ /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
+ /* 20 */ DECLARE_AMD_DEV("AMD5536"),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -530,7 +532,8 @@
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 },
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index b4ffaa7..09a13c1 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -304,7 +304,7 @@
}
addr = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x "
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
"driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
ent->device, ent->driver_data);
@@ -467,15 +467,15 @@
* check 0 irq after we return from chip-specific bus setup, since
* that can affect this due to setup
*/
- if (!pdev->irq)
+ if (!dd->ipath_irq)
ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
"work\n");
else {
- ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
+ ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
IPATH_DRV_NAME, dd);
if (ret) {
ipath_dev_err(dd, "Couldn't setup irq handler, "
- "irq=%u: %d\n", pdev->irq, ret);
+ "irq=%d: %d\n", dd->ipath_irq, ret);
goto bail_iounmap;
}
}
@@ -637,11 +637,10 @@
* free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
* for all versions of the driver, if they were allocated
*/
- if (pdev->irq) {
- ipath_cdbg(VERBOSE,
- "unit %u free_irq of irq %x\n",
- dd->ipath_unit, pdev->irq);
- free_irq(pdev->irq, dd);
+ if (dd->ipath_irq) {
+ ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+ dd->ipath_unit, dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
} else
ipath_dbg("irq is 0, not doing free_irq "
"for unit %u\n", dd->ipath_unit);
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 9e4e8d4..e57c7a3 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/htirq.h>
#include "ipath_kernel.h"
#include "ipath_registers.h"
@@ -913,49 +914,40 @@
}
}
-static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
- int pos)
+static int ipath_ht_intconfig(struct ipath_devdata *dd)
{
- u32 int_handler_addr_lower;
- u32 int_handler_addr_upper;
- u64 ihandler;
- u32 intvec;
+ int ret;
- /* use indirection register to get the intr handler */
- pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10);
- pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower);
- pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11);
- pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper);
+ if (dd->ipath_intconfig) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
+ dd->ipath_intconfig); /* interrupt address */
+ ret = 0;
+ } else {
+ ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
+ "interrupt address\n");
+ ret = -EINVAL;
+ }
- ihandler = (u64) int_handler_addr_lower |
- ((u64) int_handler_addr_upper << 32);
+ return ret;
+}
+
+static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
+ struct ht_irq_msg *msg)
+{
+ struct ipath_devdata *dd = pci_get_drvdata(dev);
+ u64 prev_intconfig = dd->ipath_intconfig;
+
+ dd->ipath_intconfig = msg->address_lo;
+ dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
/*
- * kernels with CONFIG_PCI_MSI set the vector in the irq field of
- * struct pci_device, so we use that to program the internal
- * interrupt register (not config space) with that value. The BIOS
- * must still have done the basic MSI setup.
+ * If the previous value of dd->ipath_intconfig is zero, we're
+ * getting configured for the first time, and must not program the
+ * intconfig register here (it will be programmed later, when the
+ * hardware is ready). Otherwise, we should.
*/
- intvec = pdev->irq;
- /*
- * clear any vector bits there; normally not set but we'll overload
- * this for some debug purposes (setting the HTC debug register
- * value from software, rather than GPIOs), so it might be set on a
- * driver reload.
- */
- ihandler &= ~0xff0000;
- /* x86 vector goes in intrinfo[23:16] */
- ihandler |= intvec << 16;
- ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, "
- "interruptconfig %llx\n", int_handler_addr_lower,
- int_handler_addr_upper, intvec,
- (unsigned long long) ihandler);
-
- /* can't program yet, so save for interrupt setup */
- dd->ipath_intconfig = ihandler;
- /* keep going, so we find link control stuff also */
-
- return ihandler != 0;
+ if (prev_intconfig)
+ ipath_ht_intconfig(dd);
}
/**
@@ -971,12 +963,19 @@
static int ipath_setup_ht_config(struct ipath_devdata *dd,
struct pci_dev *pdev)
{
- int pos, ret = 0;
- int ihandler = 0;
+ int pos, ret;
+
+ ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Couldn't create interrupt handler: "
+ "err %d\n", ret);
+ goto bail;
+ }
+ dd->ipath_irq = ret;
+ ret = 0;
/*
- * Read the capability info to find the interrupt info, and also
- * handle clearing CRC errors in linkctrl register if necessary. We
+ * Handle clearing CRC errors in linkctrl register if necessary. We
* do this early, before we ever enable errors or hardware errors,
* mostly to avoid causing the chip to enter freeze mode.
*/
@@ -1000,17 +999,9 @@
}
if (!(cap_type & 0xE0))
slave_or_pri_blk(dd, pdev, pos, cap_type);
- else if (cap_type == HT_INTR_DISC_CONFIG)
- ihandler = set_int_handler(dd, pdev, pos);
} while ((pos = pci_find_next_capability(pdev, pos,
PCI_CAP_ID_HT)));
- if (!ihandler) {
- ipath_dev_err(dd, "Couldn't find interrupt handler in "
- "config space\n");
- ret = -ENODEV;
- }
-
bail:
return ret;
}
@@ -1360,25 +1351,6 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
}
-static int ipath_ht_intconfig(struct ipath_devdata *dd)
-{
- int ret;
-
- if (!dd->ipath_intconfig) {
- ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
- "interrupt address\n");
- ret = 1;
- goto bail;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
- dd->ipath_intconfig); /* interrupt address */
- ret = 0;
-
-bail:
- return ret;
-}
-
/**
* ipath_pe_put_tid - write a TID in chip
* @dd: the infinipath device
@@ -1575,6 +1547,14 @@
return 0;
}
+static void ipath_ht_free_irq(struct ipath_devdata *dd)
+{
+ free_irq(dd->ipath_irq, dd);
+ ht_destroy_irq(dd->ipath_irq);
+ dd->ipath_irq = 0;
+ dd->ipath_intconfig = 0;
+}
+
/**
* ipath_init_iba6110_funcs - set up the chip-specific function pointers
* @dd: the infinipath device
@@ -1598,6 +1578,7 @@
dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
dd->ipath_f_setextled = ipath_setup_ht_setextled;
dd->ipath_f_get_base_info = ipath_ht_get_base_info;
+ dd->ipath_f_free_irq = ipath_ht_free_irq;
/*
* initialize chip-specific variables
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index a72ab9d..6af8968 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -851,6 +851,7 @@
int pos, ret;
dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
+ dd->ipath_irq = pdev->irq;
ret = pci_enable_msi(dd->pcidev);
if (ret)
ipath_dev_err(dd, "pci_enable_msi failed: %d, "
@@ -1323,6 +1324,12 @@
return 0;
}
+static void ipath_pe_free_irq(struct ipath_devdata *dd)
+{
+ free_irq(dd->ipath_irq, dd);
+ dd->ipath_irq = 0;
+}
+
/**
* ipath_init_iba6120_funcs - set up the chip-specific function pointers
* @dd: the infinipath device
@@ -1349,6 +1356,7 @@
dd->ipath_f_cleanup = ipath_setup_pe_cleanup;
dd->ipath_f_setextled = ipath_setup_pe_setextled;
dd->ipath_f_get_base_info = ipath_pe_get_base_info;
+ dd->ipath_f_free_irq = ipath_pe_free_irq;
/* initialize chip-specific variables */
dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index d9079ee..5652a55 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -710,14 +710,14 @@
* linuxbios development work, and it may happen in
* the future again.
*/
- if (dd->pcidev && dd->pcidev->irq) {
+ if (dd->pcidev && dd->ipath_irq) {
ipath_dev_err(dd, "Now %u unexpected "
"interrupts, unregistering "
"interrupt handler\n",
*unexpectp);
- ipath_dbg("free_irq of irq %x\n",
- dd->pcidev->irq);
- free_irq(dd->pcidev->irq, dd);
+ ipath_dbg("free_irq of irq %d\n",
+ dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
}
}
if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
@@ -753,7 +753,7 @@
if (allbits == 2) {
ipath_dev_err(dd, "Still bad interrupt status, "
"unregistering interrupt\n");
- free_irq(dd->pcidev->irq, dd);
+ dd->ipath_f_free_irq(dd);
} else if (allbits > 2) {
if ((allbits % 10000) == 0)
printk(".");
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 06d5020..986b212 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -213,6 +213,8 @@
void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
/* fill out chip-specific fields */
int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
+ /* free irq */
+ void (*ipath_f_free_irq)(struct ipath_devdata *);
struct ipath_ibdev *verbs_dev;
struct timer_list verbs_timer;
/* total dwords sent (summed from counter) */
@@ -328,6 +330,8 @@
/* so we can rewrite it after a chip reset */
u32 ipath_pcibar1;
+ /* interrupt number */
+ int ipath_irq;
/* HT/PCI Vendor ID (here for NodeInfo) */
u16 ipath_vendorid;
/* HT/PCI Device ID (here for NodeInfo) */
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index d8d256d..5800bee 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -616,7 +616,7 @@
} else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
skb_reserve(bcs->skb, HW_HDR_LEN);
else {
- gig_dbg(DEBUG_INIT, "could not allocate skb\n");
+ warn("could not allocate skb\n");
bcs->inputstate |= INS_skip_frame;
}
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
index 1fadf01..1875877 100644
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ b/drivers/isdn/hysdn/hysdn_sched.c
@@ -155,21 +155,17 @@
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
- spin_lock_irqsave(&card->hysdn_lock, flags);
while (card->async_busy) {
- sti();
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg delayed");
msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt) {
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ if (!--cnt)
return (-ERR_ASYNC_TIME); /* timed out */
- }
- cli();
} /* wait for buffer to become free */
+ spin_lock_irqsave(&card->hysdn_lock, flags);
strcpy(card->async_data, line);
card->async_len = strlen(line) + 1;
card->async_channel = chan;
@@ -177,30 +173,23 @@
/* now queue the task */
schedule_work(&card->irq_queue);
- sti();
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg data queued");
cnt++; /* short delay */
- cli();
while (card->async_busy) {
- sti();
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
msleep_interruptible(20); /* Timeout 20ms */
- if (!--cnt) {
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ if (!--cnt)
return (-ERR_ASYNC_TIME); /* timed out */
- }
- cli();
} /* wait for buffer to become free again */
- spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
if (card->debug_flags & LOG_SCHED_ASYN)
hysdn_addlog(card, "async tx-cfg data send");
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index d13bb15..4510ad8 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -606,9 +606,14 @@
return __get_name_cell(param->name);
md = dm_get_md(huge_decode_dev(param->dev));
- if (md)
- mdptr = dm_get_mdptr(md);
+ if (!md)
+ goto out;
+ mdptr = dm_get_mdptr(md);
+ if (!mdptr)
+ dm_put(md);
+
+out:
return mdptr;
}
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 659224c..48a653b 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -24,6 +24,7 @@
static struct workqueue_struct *_kmirrord_wq;
static struct work_struct _kmirrord_work;
+static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped);
static inline void wake(void)
{
@@ -83,6 +84,7 @@
struct list_head *buckets;
spinlock_t region_lock;
+ atomic_t recovery_in_flight;
struct semaphore recovery_count;
struct list_head clean_regions;
struct list_head quiesced_regions;
@@ -191,6 +193,7 @@
spin_lock_init(&rh->region_lock);
sema_init(&rh->recovery_count, 0);
+ atomic_set(&rh->recovery_in_flight, 0);
INIT_LIST_HEAD(&rh->clean_regions);
INIT_LIST_HEAD(&rh->quiesced_regions);
INIT_LIST_HEAD(&rh->recovered_regions);
@@ -382,6 +385,8 @@
rh->log->type->clear_region(rh->log, reg->key);
rh->log->type->complete_resync_work(rh->log, reg->key, 1);
dispatch_bios(rh->ms, ®->delayed_bios);
+ if (atomic_dec_and_test(&rh->recovery_in_flight))
+ wake_up_all(&_kmirrord_recovery_stopped);
up(&rh->recovery_count);
mempool_free(reg, rh->region_pool);
}
@@ -502,11 +507,21 @@
static void rh_recovery_prepare(struct region_hash *rh)
{
- while (!down_trylock(&rh->recovery_count))
+ /* Extra reference to avoid race with rh_stop_recovery */
+ atomic_inc(&rh->recovery_in_flight);
+
+ while (!down_trylock(&rh->recovery_count)) {
+ atomic_inc(&rh->recovery_in_flight);
if (__rh_recovery_prepare(rh) <= 0) {
+ atomic_dec(&rh->recovery_in_flight);
up(&rh->recovery_count);
break;
}
+ }
+
+ /* Drop the extra reference */
+ if (atomic_dec_and_test(&rh->recovery_in_flight))
+ wake_up_all(&_kmirrord_recovery_stopped);
}
/*
@@ -1177,6 +1192,11 @@
struct dirty_log *log = ms->rh.log;
rh_stop_recovery(&ms->rh);
+
+ /* Wait for all I/O we generated to complete */
+ wait_event(_kmirrord_recovery_stopped,
+ !atomic_read(&ms->rh.recovery_in_flight));
+
if (log->type->suspend && log->type->suspend(log))
/* FIXME: need better error handling */
DMWARN("log suspend failed");
diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c
index c5a16c5..6f9fcd4 100644
--- a/drivers/md/dm-round-robin.c
+++ b/drivers/md/dm-round-robin.c
@@ -136,7 +136,7 @@
path->pscontext = pi;
- list_add(&pi->list, &s->valid_paths);
+ list_add_tail(&pi->list, &s->valid_paths);
return 0;
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index b5764a8..fc4f743 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1285,7 +1285,7 @@
down(&md->suspend_lock);
if (dm_suspended(md))
- goto out;
+ goto out_unlock;
map = dm_get_table(md);
@@ -1361,6 +1361,8 @@
}
dm_table_put(map);
+
+out_unlock:
up(&md->suspend_lock);
return r;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 50ab4a9..8cbf9c9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3200,6 +3200,7 @@
mddev->changed = 1;
md_new_event(mddev);
+ kobject_uevent(&mddev->gendisk->kobj, KOBJ_CHANGE);
return 0;
}
@@ -4485,6 +4486,7 @@
* many dirty RAID5 blocks.
*/
+ current->flags |= PF_NOFREEZE;
allow_signal(SIGKILL);
while (!kthread_should_stop()) {
@@ -4501,7 +4503,6 @@
test_bit(THREAD_WAKEUP, &thread->flags)
|| kthread_should_stop(),
thread->timeout);
- try_to_freeze();
clear_bit(THREAD_WAKEUP, &thread->flags);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e14f457..69c3e20 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3659,7 +3659,7 @@
bdev = bdget_disk(conf->mddev->gendisk, 0);
if (bdev) {
mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, conf->mddev->array_size << 10);
+ i_size_write(bdev->bd_inode, (loff_t)conf->mddev->array_size << 10);
mutex_unlock(&bdev->bd_inode->i_mutex);
bdput(bdev);
}
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index d9953f7..5297a36 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -217,11 +217,9 @@
}
/* wait until we get a transfer done or error */
timeout = jiffies + HZ/100 + 1; /* 10ms */
+ /* first read usually delivers bogus results... */
+ saa7146_i2c_status(dev);
while(1) {
- /**
- * first read usually delivers bogus results...
- */
- saa7146_i2c_status(dev);
status = saa7146_i2c_status(dev);
if ((status & 0x3) != 1)
break;
@@ -232,10 +230,10 @@
DEB_I2C(("saa7146_i2c_writeout: timed out waiting for end of xfer\n"));
return -EIO;
}
- if ((++trial < 20) && short_delay)
+ if (++trial < 50 && short_delay)
udelay(10);
else
- msleep(1);
+ msleep(1);
}
}
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index 2853ea1..87fb75f 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -246,7 +246,7 @@
wIndex = (chipaddr << 8 ) | addr;
deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
- ((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8);
+ wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8);
len = usb_control_msg(fc_usb->udev,pipe,
req,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2cc5caa..a263b3f 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -26,7 +26,7 @@
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
select DVB_DIB3000MC
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
@@ -34,7 +34,7 @@
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
depends on DVB_USB
select DVB_DIB3000MB
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_DIB3000MC
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Support for USB2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -70,7 +70,7 @@
tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
select DVB_DIB3000MC
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -87,7 +87,7 @@
tristate "HanfTek UMT-010 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_DIB3000MC
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
@@ -153,7 +153,7 @@
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_DIB3000MC
- select DVB_TUNER_MT2060
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 080fa25..aebb8d6 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -276,6 +276,8 @@
config DVB_TUNER_MT2060
tristate "Microtune MT2060 silicon IF tuner"
+ depends on I2C
+ default m if DVB_FE_CUSTOMISE
help
A driver for the silicon IF tuner MT2060 from Microtune.
diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h
index 6dfa839..7e4f95e 100644
--- a/drivers/media/dvb/frontends/bcm3510.h
+++ b/drivers/media/dvb/frontends/bcm3510.h
@@ -34,7 +34,7 @@
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
-#if defined(CONFIG_DVB_BCM3510) || defined(CONFIG_DVB_BCM3510_MODULE)
+#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE))
extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb/frontends/cx22700.h
index 10286cc..7ac3369 100644
--- a/drivers/media/dvb/frontends/cx22700.h
+++ b/drivers/media/dvb/frontends/cx22700.h
@@ -31,7 +31,7 @@
u8 demod_address;
};
-#if defined(CONFIG_DVB_CX22700) || defined(CONFIG_DVB_CX22700_MODULE)
+#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE))
extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index bc217dd..9cd64da 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -41,7 +41,7 @@
u8 output_mode;
};
-#if defined(CONFIG_DVB_CX22702) || defined(CONFIG_DVB_CX22702_MODULE)
+#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE))
extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h
index c9d5ae2..0ca3af4 100644
--- a/drivers/media/dvb/frontends/cx24110.h
+++ b/drivers/media/dvb/frontends/cx24110.h
@@ -41,7 +41,7 @@
return r;
}
-#if defined(CONFIG_DVB_CX24110) || defined(CONFIG_DVB_CX24110_MODULE)
+#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h
index 57a1dae..84f9e4f 100644
--- a/drivers/media/dvb/frontends/cx24123.h
+++ b/drivers/media/dvb/frontends/cx24123.h
@@ -35,7 +35,7 @@
int lnb_polarity;
};
-#if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE)
+#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE))
extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
index 0caac3f..a6d3854 100644
--- a/drivers/media/dvb/frontends/dib3000.h
+++ b/drivers/media/dvb/frontends/dib3000.h
@@ -41,7 +41,7 @@
int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
};
-#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE)
+#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE))
extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
#else
diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb/frontends/dib3000mc.h
index 0d6fdef..72d4757 100644
--- a/drivers/media/dvb/frontends/dib3000mc.h
+++ b/drivers/media/dvb/frontends/dib3000mc.h
@@ -39,7 +39,7 @@
#define DEFAULT_DIB3000MC_I2C_ADDRESS 16
#define DEFAULT_DIB3000P_I2C_ADDRESS 24
-#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE)
+#if defined(CONFIG_DVB_DIB3000MC) || (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg);
#else
static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb/frontends/isl6421.h
index 1916e3e..ea7f78a 100644
--- a/drivers/media/dvb/frontends/isl6421.h
+++ b/drivers/media/dvb/frontends/isl6421.h
@@ -39,7 +39,7 @@
#define ISL6421_ISEL1 0x20
#define ISL6421_DCL 0x40
-#if defined(CONFIG_DVB_ISL6421) || defined(CONFIG_DVB_ISL6421_MODULE)
+#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE))
/* override_set and override_clear control which system register bits (above) to always set & clear */
extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
u8 override_set, u8 override_clear);
diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
index 21ba4a2..cd15f76 100644
--- a/drivers/media/dvb/frontends/l64781.h
+++ b/drivers/media/dvb/frontends/l64781.h
@@ -31,7 +31,7 @@
u8 demod_address;
};
-#if defined(CONFIG_DVB_L64781) || defined(CONFIG_DVB_L64781_MODULE)
+#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE))
extern struct dvb_frontend* l64781_attach(const struct l64781_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h
index 3f96b48..9950590 100644
--- a/drivers/media/dvb/frontends/lgdt330x.h
+++ b/drivers/media/dvb/frontends/lgdt330x.h
@@ -52,7 +52,7 @@
int clock_polarity_flip;
};
-#if defined(CONFIG_DVB_LGDT330X) || defined(CONFIG_DVB_LGDT330X_MODULE)
+#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE))
extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
index 1fe1dd1..68906ac 100644
--- a/drivers/media/dvb/frontends/lnbp21.h
+++ b/drivers/media/dvb/frontends/lnbp21.h
@@ -39,7 +39,7 @@
#include <linux/dvb/frontend.h>
-#if defined(CONFIG_DVB_LNBP21) || defined(CONFIG_DVB_LNBP21_MODULE)
+#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE))
/* override_set and override_clear control which system register bits (above) to always set & clear */
extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear);
#else
diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h
index 34a37c2..0a86eab 100644
--- a/drivers/media/dvb/frontends/mt2060.h
+++ b/drivers/media/dvb/frontends/mt2060.h
@@ -30,6 +30,14 @@
u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
};
+#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE))
extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
+#else
+static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TUNER_MT2060
#endif
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index 7112fb4..cf9a150 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -34,7 +34,7 @@
u8 demod_address;
};
-#if defined(CONFIG_DVB_MT312) || defined(CONFIG_DVB_MT312_MODULE)
+#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE))
struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h
index 0035c2e..e996408 100644
--- a/drivers/media/dvb/frontends/mt352.h
+++ b/drivers/media/dvb/frontends/mt352.h
@@ -51,7 +51,7 @@
int (*demod_init)(struct dvb_frontend* fe);
};
-#if defined(CONFIG_DVB_MT352) || defined(CONFIG_DVB_MT352_MODULE)
+#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE))
extern struct dvb_frontend* mt352_attach(const struct mt352_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h
index 2eb220e..28bc559 100644
--- a/drivers/media/dvb/frontends/nxt200x.h
+++ b/drivers/media/dvb/frontends/nxt200x.h
@@ -45,7 +45,7 @@
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
-#if defined(CONFIG_DVB_NXT200X) || defined(CONFIG_DVB_NXT200X_MODULE)
+#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE))
extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb/frontends/nxt6000.h
index 9397393..13d2251 100644
--- a/drivers/media/dvb/frontends/nxt6000.h
+++ b/drivers/media/dvb/frontends/nxt6000.h
@@ -33,7 +33,7 @@
u8 clock_inversion:1;
};
-#if defined(CONFIG_DVB_NXT6000) || defined(CONFIG_DVB_NXT6000_MODULE)
+#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE))
extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb/frontends/or51132.h
index 9718be4..add24f0 100644
--- a/drivers/media/dvb/frontends/or51132.h
+++ b/drivers/media/dvb/frontends/or51132.h
@@ -34,7 +34,7 @@
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
-#if defined(CONFIG_DVB_OR51132) || defined(CONFIG_DVB_OR51132_MODULE)
+#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE))
extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb/frontends/or51211.h
index 10a5419..8aad840 100644
--- a/drivers/media/dvb/frontends/or51211.h
+++ b/drivers/media/dvb/frontends/or51211.h
@@ -37,7 +37,7 @@
void (*sleep)(struct dvb_frontend * fe);
};
-#if defined(CONFIG_DVB_OR51211) || defined(CONFIG_DVB_OR51211_MODULE)
+#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE))
extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index efc54d7..1555870 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -34,7 +34,7 @@
u8 invert:1;
};
-#if defined(CONFIG_DVB_S5H1420) || defined(CONFIG_DVB_S5H1420_MODULE)
+#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb/frontends/sp8870.h
index 4cf27d3..909cefe 100644
--- a/drivers/media/dvb/frontends/sp8870.h
+++ b/drivers/media/dvb/frontends/sp8870.h
@@ -35,7 +35,7 @@
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
-#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE)
+#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE))
extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb/frontends/sp887x.h
index cab7ea6..7ee78d7 100644
--- a/drivers/media/dvb/frontends/sp887x.h
+++ b/drivers/media/dvb/frontends/sp887x.h
@@ -17,7 +17,7 @@
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
-#if defined(CONFIG_DVB_SP887X) || defined(CONFIG_DVB_SP887X_MODULE)
+#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE))
extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb/frontends/stv0297.h
index 760b80d..69f4515 100644
--- a/drivers/media/dvb/frontends/stv0297.h
+++ b/drivers/media/dvb/frontends/stv0297.h
@@ -42,7 +42,7 @@
u8 stop_during_read:1;
};
-#if defined(CONFIG_DVB_STV0297) || defined(CONFIG_DVB_STV0297_MODULE)
+#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE))
extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h
index 7ef2520..33df949 100644
--- a/drivers/media/dvb/frontends/stv0299.h
+++ b/drivers/media/dvb/frontends/stv0299.h
@@ -89,7 +89,7 @@
int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio);
};
-#if defined(CONFIG_DVB_STV0299) || defined(CONFIG_DVB_STV0299_MODULE)
+#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE))
extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h
index d68ae20..e3da780 100644
--- a/drivers/media/dvb/frontends/tda10021.h
+++ b/drivers/media/dvb/frontends/tda10021.h
@@ -32,7 +32,7 @@
u8 demod_address;
};
-#if defined(CONFIG_DVB_TDA10021) || defined(CONFIG_DVB_TDA10021_MODULE)
+#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda10021_attach(const struct tda10021_config* config,
struct i2c_adapter* i2c, u8 pwm);
#else
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index e28fca0..605ad2d 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -71,7 +71,7 @@
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
-#if defined(CONFIG_DVB_TDA1004X) || defined(CONFIG_DVB_TDA1004X_MODULE)
+#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c);
diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb/frontends/tda10086.h
index 18457ad..ed584a8 100644
--- a/drivers/media/dvb/frontends/tda10086.h
+++ b/drivers/media/dvb/frontends/tda10086.h
@@ -35,7 +35,7 @@
u8 invert;
};
-#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
+#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb/frontends/tda8083.h
index aae15bd..2d33079 100644
--- a/drivers/media/dvb/frontends/tda8083.h
+++ b/drivers/media/dvb/frontends/tda8083.h
@@ -35,7 +35,7 @@
u8 demod_address;
};
-#if defined(CONFIG_DVB_TDA8083) || defined(CONFIG_DVB_TDA8083_MODULE)
+#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c
index eeab26b..34815b0 100644
--- a/drivers/media/dvb/frontends/tda826x.c
+++ b/drivers/media/dvb/frontends/tda826x.c
@@ -121,7 +121,7 @@
.info = {
.name = "Philips TDA826X",
.frequency_min = 950000,
- .frequency_min = 2175000
+ .frequency_max = 2175000
},
.release = tda826x_release,
.sleep = tda826x_sleep,
diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb/frontends/tda826x.h
index 83998c0..ad99811 100644
--- a/drivers/media/dvb/frontends/tda826x.h
+++ b/drivers/media/dvb/frontends/tda826x.h
@@ -35,7 +35,7 @@
* @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
* @return FE pointer on success, NULL on failure.
*/
-#if defined(CONFIG_DVB_TDA826X) || defined(CONFIG_DVB_TDA826X_MODULE)
+#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,
struct i2c_adapter *i2c,
int has_loopthrough);
diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h
index 8f98033..03a665e 100644
--- a/drivers/media/dvb/frontends/tua6100.h
+++ b/drivers/media/dvb/frontends/tua6100.h
@@ -34,7 +34,7 @@
#include <linux/i2c.h>
#include "dvb_frontend.h"
-#if defined(CONFIG_DVB_TUA6100) || defined(CONFIG_DVB_TUA6100_MODULE)
+#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE))
extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
#else
static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb/frontends/ves1820.h
index f0c9dde..e4a2a32 100644
--- a/drivers/media/dvb/frontends/ves1820.h
+++ b/drivers/media/dvb/frontends/ves1820.h
@@ -41,7 +41,7 @@
u8 selagc:1;
};
-#if defined(CONFIG_DVB_VES1820) || defined(CONFIG_DVB_VES1820_MODULE)
+#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE))
extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
struct i2c_adapter* i2c, u8 pwm);
#else
diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb/frontends/ves1x93.h
index 395fed3..d507f89 100644
--- a/drivers/media/dvb/frontends/ves1x93.h
+++ b/drivers/media/dvb/frontends/ves1x93.h
@@ -40,7 +40,7 @@
u8 invert_pwm:1;
};
-#if defined(CONFIG_DVB_VES1X93) || defined(CONFIG_DVB_VES1X93_MODULE)
+#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE))
extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
struct i2c_adapter* i2c);
#else
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
index 79a9472..0bc0109 100644
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -36,7 +36,7 @@
int parallel_ts;
};
-#if defined(CONFIG_DVB_ZL10353) || defined(CONFIG_DVB_ZL10353_MODULE)
+#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
struct i2c_adapter *i2c);
#else
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 2a2e9b4..cd5ec48 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -46,7 +46,14 @@
#include "bsbe1.h"
#include "bsru6.h"
-#define DEBIADDR_IR 0x1234
+/*
+ * Regarding DEBIADDR_IR:
+ * Some CI modules hang if random addresses are read.
+ * Using address 0x4000 for the IR read means that we
+ * use the same address as for CI version, which should
+ * be a safe default.
+ */
+#define DEBIADDR_IR 0x4000
#define DEBIADDR_CICONTROL 0x0000
#define DEBIADDR_CIVERSION 0x4000
#define DEBIADDR_IO 0x1000
@@ -1028,6 +1035,7 @@
case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
budget_ci->tuner_pll_address = 0x60;
+ philips_tdm1316l_config.invert = 1;
budget_ci->budget.dvb_frontend =
dvb_attach(tda10046_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
if (budget_ci->budget.dvb_frontend) {
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index fbe5b61..bf26755 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -186,7 +186,7 @@
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L1
+ depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA7110 video decoders.
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index a84903e..21ebe8f 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4001,7 +4001,7 @@
* - sleep 1ms
* - write 0x0E
* read from GPIO_DATA into buf (uint_32)
- * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
+ * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index ee48995..57e1c02 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -202,13 +202,19 @@
ir->sampling = 1;
break;
case CX88_BOARD_WINFAST_DTV2000H:
- case CX88_BOARD_WINFAST2000XP_EXPERT:
ir_codes = ir_codes_winfast;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0x8f8;
ir->mask_keyup = 0x100;
ir->polling = 50; /* ms */
break;
+ case CX88_BOARD_WINFAST2000XP_EXPERT:
+ ir_codes = ir_codes_winfast;
+ ir->gpio_addr = MO_GP0_IO;
+ ir->mask_keycode = 0x8f8;
+ ir->mask_keyup = 0x100;
+ ir->polling = 1; /* ms */
+ break;
case CX88_BOARD_IODATA_GVBCTV7E:
ir_codes = ir_codes_iodata_bctv7e;
ir->gpio_addr = MO_GP0_IO;
@@ -216,7 +222,7 @@
ir->mask_keydown = 0x02;
ir->polling = 5; /* ms */
break;
- case CX88_BOARD_PROLINK_PLAYTVPVR:
+ case CX88_BOARD_PROLINK_PLAYTVPVR:
case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO:
ir_codes = ir_codes_pixelview;
ir->gpio_addr = MO_GP1_IO;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
index df8feac..c80c26b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
@@ -221,7 +221,7 @@
static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt)
{
int ret;
- ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,0);
+ ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,NULL);
pvr2_trace(PVR2_TRACE_CHIPS,"i2c cx25840 decoder_reset (ret=%d)",ret);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 97e974d..bb40e90 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -711,8 +711,8 @@
dip->devbase.minor,pvr2_config_get_name(dip->config));
/* Paranoia */
- dip->v4lp = 0;
- dip->stream = 0;
+ dip->v4lp = NULL;
+ dip->stream = NULL;
/* Actual deallocation happens later when all internal references
are gone. */
@@ -1076,7 +1076,7 @@
vp->vdev = kmalloc(sizeof(*vp->vdev),GFP_KERNEL);
if (!vp->vdev) {
kfree(vp);
- return 0;
+ return NULL;
}
memset(vp->vdev,0,sizeof(*vp->vdev));
pvr2_channel_init(&vp->channel,mnp);
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index c9d8e3b..51f0cfd 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2969,7 +2969,7 @@
/* Petr Baudis <pasky@ucw.cz> */
.name = "AVerMedia TV Hybrid A16AR",
.audio_clock = 0x187de7,
- .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */
+ .tuner_type = TUNER_PHILIPS_TD1316, /* untested */
.radio_type = TUNER_TEA5767, /* untested */
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
@@ -3718,6 +3718,7 @@
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
+ case SAA7134_BOARD_AVERMEDIA_777:
/* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
@@ -3734,6 +3735,7 @@
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_PROTEUS_2309:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
@@ -3772,7 +3774,6 @@
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
break;
- case SAA7134_BOARD_AVERMEDIA_A16AR:
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 1ba53b5..6b61d9b 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1147,6 +1147,8 @@
&philips_europa_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
+ dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
+ dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index ff59911..dee8355 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -185,7 +185,6 @@
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
- case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
@@ -194,6 +193,16 @@
saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
+ case SAA7134_BOARD_AVERMEDIA_777:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
+ ir_codes = ir_codes_avermedia;
+ mask_keycode = 0x02F200;
+ mask_keydown = 0x000400;
+ polling = 50; // ms
+ /* Without this we won't receive key up events */
+ saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+ saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+ break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001f;
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index e6baaee..6b9ef73 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -468,7 +468,7 @@
(eeprom_data[i+6] << 8) +
(eeprom_data[i+7] << 16);
- if ( (eeprom_data[i + 8] && 0xf0) &&
+ if ( (eeprom_data[i + 8] & 0xf0) &&
(tvee->serial_number < 0xffffff) ) {
tvee->MAC_address[0] = 0x00;
tvee->MAC_address[1] = 0x0D;
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index bbdba7b..db9d7df 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -44,12 +44,14 @@
*/
#include <linux/kernel.h>
+#include <linux/fs.h>
#include <linux/module.h>
+#include <linux/buffer_head.h>
#include <linux/kprobes.h>
-#include <linux/kallsyms.h>
+#include <linux/list.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
#include <scsi/scsi_cmnd.h>
#ifdef CONFIG_IDE
@@ -116,16 +118,16 @@
static int count = DEFAULT_COUNT;
module_param(recur_count, int, 0644);
-MODULE_PARM_DESC(recur_count, "Recurcion level for the stack overflow test,\
- default is 10");
+MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
+ "default is 10");
module_param(cpoint_name, charp, 0644);
-MODULE_PARM_DESC(cpoint_name, "Crash Point, where kernel is to be crashed");
-module_param(cpoint_type, charp, 06444);
-MODULE_PARM_DESC(cpoint_type, "Crash Point Type, action to be taken on\
- hitting the crash point");
-module_param(cpoint_count, int, 06444);
-MODULE_PARM_DESC(cpoint_count, "Crash Point Count, number of times the \
- crash point is to be hit to trigger action");
+MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed");
+module_param(cpoint_type, charp, 0644);
+MODULE_PARM_DESC(cpoint_type, " Crash Point Type, action to be taken on "\
+ "hitting the crash point");
+module_param(cpoint_count, int, 0644);
+MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\
+ "crash point is to be hit to trigger action");
unsigned int jp_do_irq(unsigned int irq)
{
@@ -155,8 +157,8 @@
struct scan_control;
-unsigned long jp_shrink_page_list(struct list_head *page_list,
- struct scan_control *sc)
+unsigned long jp_shrink_inactive_list(unsigned long max_scan,
+ struct zone *zone, struct scan_control *sc)
{
lkdtm_handler();
jprobe_return();
@@ -295,8 +297,8 @@
lkdtm.entry = (kprobe_opcode_t*) jp_ll_rw_block;
break;
case MEM_SWAPOUT:
- lkdtm.kp.symbol_name = "shrink_page_list";
- lkdtm.entry = (kprobe_opcode_t*) jp_shrink_page_list;
+ lkdtm.kp.symbol_name = "shrink_inactive_list";
+ lkdtm.entry = (kprobe_opcode_t*) jp_shrink_inactive_list;
break;
case TIMERADD:
lkdtm.kp.symbol_name = "hrtimer_start";
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 28c17d1..6e863aa 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -486,7 +486,7 @@
config MIPS_SIM_NET
tristate "MIPS simulator Network device (EXPERIMENTAL)"
- depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
+ depends on MIPS_SIM && EXPERIMENTAL
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
@@ -2467,7 +2467,7 @@
config RIONET
tristate "RapidIO Ethernet over messaging driver support"
- depends on NETDEVICES && RAPIDIO
+ depends on RAPIDIO
config RIONET_TX_SIZE
int "Number of outbound queue entries"
@@ -2833,7 +2833,7 @@
"SCSI generic support".
config SHAPER
- tristate "Traffic Shaper (EXPERIMENTAL)"
+ tristate "Traffic Shaper (OBSOLETE)"
depends on EXPERIMENTAL
---help---
The traffic shaper is a virtual network device that allows you to
@@ -2842,9 +2842,9 @@
these virtual devices. See
<file:Documentation/networking/shaper.txt> for more information.
- An alternative to this traffic shaper is the experimental
- Class-Based Queuing (CBQ) scheduling support which you get if you
- say Y to "QoS and/or fair queuing" above.
+ An alternative to this traffic shaper are traffic schedulers which
+ you'll get if you say Y to "QoS and/or fair queuing" in
+ "Networking options".
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 0dc70c7..aa9dd8f 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -337,13 +337,16 @@
}
}
-#ifdef MODULE
-
+#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
+ defined(CONFIG_ARCNET_COM20020_ISA_MODULE)
EXPORT_SYMBOL(com20020_check);
EXPORT_SYMBOL(com20020_found);
+#endif
MODULE_LICENSE("GPL");
+#ifdef MODULE
+
int init_module(void)
{
BUGLVL(D_NORMAL) printk(VERSION);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 1ec2174..474a4e3 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -908,8 +908,9 @@
istat = br32(bp, B44_ISTAT);
imask = br32(bp, B44_IMASK);
- /* ??? What the fuck is the purpose of the interrupt mask
- * ??? register if we have to mask it out by hand anyways?
+ /* The interrupt mask register controls which interrupt bits
+ * will actually raise an interrupt to the CPU when set by hw/firmware,
+ * but doesn't mask off the bits.
*/
istat &= imask;
if (istat) {
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index c0bbdda..17a4611 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4692,6 +4692,8 @@
return 0;
}
+static struct lock_class_key bonding_netdev_xmit_lock_key;
+
/* Create a new bond based on the specified name and bonding parameters.
* Caller must NOT hold rtnl_lock; we need to release it here before we
* set up our sysfs entries.
@@ -4727,6 +4729,9 @@
if (res < 0) {
goto out_bond;
}
+
+ lockdep_set_class(&bond_dev->_xmit_lock, &bonding_netdev_xmit_lock_key);
+
if (newbond)
*newbond = bond_dev->priv;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 966b563..a03d781 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -509,6 +509,8 @@
* does not share cacheline with any other data (to avoid cache bug)
*/
RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
+ if (!RxDescList[i].skb)
+ return -ENOMEM;
RxDescList[i].descr.ctrl = 0;
RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE;
RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 8d04752..726ec5e 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4800,6 +4800,9 @@
if (adapter->hw.phy_type == e1000_phy_igp_3)
e1000_phy_powerdown_workaround(&adapter->hw);
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
@@ -4830,6 +4833,10 @@
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
+ if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
+ return err;
+
+ e1000_power_up_phy(adapter);
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index b40724f..39ad9f7 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -39,7 +39,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0034"
+#define DRV_VERSION "EHEA_0043"
#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
@@ -105,9 +105,6 @@
#define EHEA_BCMC_VLANID_ALL 0x01
#define EHEA_BCMC_VLANID_SINGLE 0x00
-/* Use this define to kmallocate pHYP control blocks */
-#define H_CB_ALIGNMENT 4096
-
#define EHEA_CACHE_LINE 128
/* Memory Regions */
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 82eb2fb..9f57c2e 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -238,7 +238,7 @@
data[i++] = port->port_res[0].swqe_refill_th;
data[i++] = port->resets;
- cb6 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb6) {
ehea_error("no mem for cb6");
return;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 4538c99..6ad6961 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -92,7 +92,7 @@
memset(stats, 0, sizeof(*stats));
- cb2 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb2) {
ehea_error("no mem for cb2");
goto out;
@@ -586,8 +586,8 @@
u64 hret;
struct hcp_ehea_port_cb0 *cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */
- if (!cb0) { /* ehea_neq_tasklet() */
+ cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC); /* May be called via */
+ if (!cb0) { /* ehea_neq_tasklet() */
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
@@ -670,7 +670,7 @@
u64 hret;
int ret = 0;
- cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
ret = -ENOMEM;
@@ -985,7 +985,7 @@
struct hcp_ehea_port_cb0 *cb0;
ret = -ENOMEM;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0)
goto out;
@@ -1443,7 +1443,7 @@
goto out;
}
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ehea_error("no mem for cb0");
ret = -ENOMEM;
@@ -1501,7 +1501,7 @@
if ((enable && port->promisc) || (!enable && !port->promisc))
return;
- cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC);
+ cb7 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
if (!cb7) {
ehea_error("no mem for cb7");
goto out;
@@ -1870,7 +1870,7 @@
port->vgrp = grp;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1899,7 +1899,7 @@
int index;
u64 hret;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1935,7 +1935,7 @@
if (port->vgrp)
port->vgrp->vlan_devices[vid] = NULL;
- cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
@@ -1968,7 +1968,7 @@
u64 dummy64 = 0;
struct hcp_modify_qp_cb0* cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ret = -ENOMEM;
goto out;
@@ -2269,7 +2269,7 @@
u64 hret;
int ret;
- cb = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb) {
ret = -ENOMEM;
goto out;
@@ -2340,7 +2340,7 @@
goto out;
/* Enable Jumbo frames */
- cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
} else {
diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c
index 0b51a8c..0cfc2bc 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ehea/ehea_phyp.c
@@ -506,7 +506,7 @@
const u8 pagesize, const u8 queue_type,
const u64 log_pageaddr, const u64 count)
{
- if ((count > 1) && (log_pageaddr & 0xfff)) {
+ if ((count > 1) && (log_pageaddr & ~PAGE_MASK)) {
ehea_error("not on pageboundary");
return H_PARAMETER;
}
diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h
index fa51e3b..919f94b 100644
--- a/drivers/net/ehea/ehea_phyp.h
+++ b/drivers/net/ehea/ehea_phyp.h
@@ -81,14 +81,16 @@
static inline void hcp_epas_ctor(struct h_epas *epas, u64 paddr_kernel,
u64 paddr_user)
{
- epas->kernel.addr = ioremap(paddr_kernel, PAGE_SIZE);
+ /* To support 64k pages we must round to 64k page boundary */
+ epas->kernel.addr = ioremap((paddr_kernel & PAGE_MASK), PAGE_SIZE) +
+ (paddr_kernel & ~PAGE_MASK);
epas->user.addr = paddr_user;
}
static inline void hcp_epas_dtor(struct h_epas *epas)
{
if (epas->kernel.addr)
- iounmap(epas->kernel.addr);
+ iounmap((void __iomem*)((u64)epas->kernel.addr & PAGE_MASK));
epas->user.addr = 0;
epas->kernel.addr = 0;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 3e18623..72ef7bd 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -209,11 +209,11 @@
{
u64 adapter_handle, hret;
- adapter_handle = cq->adapter->handle;
-
if (!cq)
return 0;
+ adapter_handle = cq->adapter->handle;
+
/* deregister all previous registered pages */
hret = ehea_h_free_resource(adapter_handle, cq->fw_handle);
if (hret != H_SUCCESS) {
@@ -512,7 +512,7 @@
start = KERNELBASE;
end = (u64)high_memory;
- nr_pages = (end - start) / PAGE_SIZE;
+ nr_pages = (end - start) / EHEA_PAGESIZE;
pt = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!pt) {
@@ -538,9 +538,9 @@
if (nr_pages > 1) {
u64 num_pages = min(nr_pages, (u64)512);
for (i = 0; i < num_pages; i++)
- pt[i] = virt_to_abs((void*)(((u64)start)
- + ((k++) *
- PAGE_SIZE)));
+ pt[i] = virt_to_abs((void*)(((u64)start) +
+ ((k++) *
+ EHEA_PAGESIZE)));
hret = ehea_h_register_rpage_mr(adapter->handle,
adapter->mr.handle, 0,
@@ -548,8 +548,9 @@
num_pages);
nr_pages -= num_pages;
} else {
- u64 abs_adr = virt_to_abs((void*)(((u64)start)
- + (k * PAGE_SIZE)));
+ u64 abs_adr = virt_to_abs((void*)(((u64)start) +
+ (k * EHEA_PAGESIZE)));
+
hret = ehea_h_register_rpage_mr(adapter->handle,
adapter->mr.handle, 0,
0, abs_adr,1);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 8e39849..06e4f77 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.67"
-#define DRV_MODULE_RELDATE "October 18, 2006"
+#define DRV_MODULE_VERSION "3.68"
+#define DRV_MODULE_RELDATE "November 02, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -6014,7 +6014,7 @@
tg3_abort_hw(tp, 1);
}
- if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
+ if (reset_phy)
tg3_phy_reset(tp);
err = tg3_chip_reset(tp);
@@ -6574,7 +6574,7 @@
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
}
- err = tg3_setup_phy(tp, reset_phy);
+ err = tg3_setup_phy(tp, 0);
if (err)
return err;
@@ -10212,7 +10212,7 @@
static void __devinit tg3_read_partno(struct tg3 *tp)
{
unsigned char vpd_data[256];
- int i;
+ unsigned int i;
u32 magic;
if (tg3_nvram_read_swab(tp, 0x0, &magic))
@@ -10258,9 +10258,9 @@
}
/* Now parse and find the part number. */
- for (i = 0; i < 256; ) {
+ for (i = 0; i < 254; ) {
unsigned char val = vpd_data[i];
- int block_end;
+ unsigned int block_end;
if (val == 0x82 || val == 0x91) {
i = (i + 3 +
@@ -10276,21 +10276,26 @@
(vpd_data[i + 1] +
(vpd_data[i + 2] << 8)));
i += 3;
- while (i < block_end) {
+
+ if (block_end > 256)
+ goto out_not_found;
+
+ while (i < (block_end - 2)) {
if (vpd_data[i + 0] == 'P' &&
vpd_data[i + 1] == 'N') {
int partno_len = vpd_data[i + 2];
- if (partno_len > 24)
+ i += 3;
+ if (partno_len > 24 || (partno_len + i) > 256)
goto out_not_found;
memcpy(tp->board_part_number,
- &vpd_data[i + 3],
- partno_len);
+ &vpd_data[i], partno_len);
/* Success. */
return;
}
+ i += 3 + vpd_data[i + 2];
}
/* Part number not found. */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
index 2ddbec6..7d383a2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -189,20 +189,24 @@
case BCM43xx_LED_INACTIVE:
continue;
case BCM43xx_LED_OFF:
+ case BCM43xx_LED_BCM4303_3:
break;
case BCM43xx_LED_ON:
turn_on = 1;
break;
case BCM43xx_LED_ACTIVITY:
+ case BCM43xx_LED_BCM4303_0:
turn_on = activity;
break;
case BCM43xx_LED_RADIO_ALL:
turn_on = radio->enabled;
break;
case BCM43xx_LED_RADIO_A:
+ case BCM43xx_LED_BCM4303_2:
turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
break;
case BCM43xx_LED_RADIO_B:
+ case BCM43xx_LED_BCM4303_1:
turn_on = (radio->enabled &&
(phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G));
@@ -257,7 +261,8 @@
continue;
#endif /* CONFIG_BCM43XX_DEBUG */
default:
- assert(0);
+ dprintkl(KERN_INFO PFX "Bad value in leds_update,"
+ " led->behaviour: 0x%x\n", led->behaviour);
};
if (led->activelow)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
index d3716cf..811e14a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
@@ -46,6 +46,12 @@
BCM43xx_LED_TEST_BLINKSLOW,
BCM43xx_LED_TEST_BLINKMEDIUM,
BCM43xx_LED_TEST_BLINKFAST,
+
+ /* Misc values for BCM4303 */
+ BCM43xx_LED_BCM4303_0 = 0x2B,
+ BCM43xx_LED_BCM4303_1 = 0x78,
+ BCM43xx_LED_BCM4303_2 = 0x2E,
+ BCM43xx_LED_BCM4303_3 = 0x19,
};
int bcm43xx_leds_init(struct bcm43xx_private *bcm);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index a94c6d8..a1b7838 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -746,7 +746,7 @@
if (err)
goto err_ctlreg;
spromctl |= 0x10; /* SPROM WRITE enable. */
- bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
if (err)
goto err_ctlreg;
/* We must burn lots of CPU cycles here, but that does not
@@ -768,7 +768,7 @@
mdelay(20);
}
spromctl &= ~0x10; /* SPROM WRITE enable. */
- bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
if (err)
goto err_ctlreg;
mdelay(500);
@@ -1463,6 +1463,23 @@
}
}
+static void drain_txstatus_queue(struct bcm43xx_private *bcm)
+{
+ u32 dummy;
+
+ if (bcm->current_core->rev < 5)
+ return;
+ /* Read all entries from the microcode TXstatus FIFO
+ * and throw them away.
+ */
+ while (1) {
+ dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0);
+ if (!dummy)
+ break;
+ dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1);
+ }
+}
+
static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm)
{
bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F);
@@ -3163,9 +3180,11 @@
static void bcm43xx_periodic_work_handler(void *d)
{
struct bcm43xx_private *bcm = d;
+ struct net_device *net_dev = bcm->net_dev;
unsigned long flags;
u32 savedirqs = 0;
int badness;
+ unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
badness = estimate_periodic_work_badness(bcm->periodic_state);
@@ -3173,7 +3192,18 @@
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
- netif_tx_disable(bcm->net_dev);
+
+ netif_tx_lock_bh(net_dev);
+ /* We must fake a started transmission here, as we are going to
+ * disable TX. If we wouldn't fake a TX, it would be possible to
+ * trigger the netdev watchdog, if the last real TX is already
+ * some time on the past (slightly less than 5secs)
+ */
+ orig_trans_start = net_dev->trans_start;
+ net_dev->trans_start = jiffies;
+ netif_stop_queue(net_dev);
+ netif_tx_unlock_bh(net_dev);
+
spin_lock_irqsave(&bcm->irq_lock, flags);
bcm43xx_mac_suspend(bcm);
if (bcm43xx_using_pio(bcm))
@@ -3198,6 +3228,7 @@
bcm43xx_pio_thaw_txqueues(bcm);
bcm43xx_mac_enable(bcm);
netif_wake_queue(bcm->net_dev);
+ net_dev->trans_start = orig_trans_start;
}
mmiowb();
spin_unlock_irqrestore(&bcm->irq_lock, flags);
@@ -3518,6 +3549,7 @@
bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC);
bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr));
bcm43xx_security_init(bcm);
+ drain_txstatus_queue(bcm);
ieee80211softmac_start(bcm->net_dev);
/* Let's go! Be careful after enabling the IRQs.
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 6dfa041..bc81b13 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -364,7 +364,7 @@
pos = 0;
while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
- if (pos + cis[pos + 1] >= CIS_MAX_LEN)
+ if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
goto cis_error;
switch (cis[pos]) {
@@ -391,7 +391,7 @@
break;
case CISTPL_MANFID:
- if (cis[pos + 1] < 5)
+ if (cis[pos + 1] < 4)
goto cis_error;
manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index ecc50db..5f1b9f5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -19,7 +19,7 @@
config PCI_MULTITHREAD_PROBE
bool "PCI Multi-threaded probe (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && BROKEN
help
Say Y here if you want the PCI core to spawn a new thread for
every PCI device that is probed. This can cause a huge
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index 0e27f24..0a8d1cc 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -25,97 +25,72 @@
struct ht_irq_cfg {
struct pci_dev *dev;
+ /* Update callback used to cope with buggy hardware */
+ ht_irq_update_t *update;
unsigned pos;
unsigned idx;
+ struct ht_irq_msg msg;
};
-void write_ht_irq_low(unsigned int irq, u32 data)
+
+void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
- pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
+ if (cfg->msg.address_lo != msg->address_lo) {
+ pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
+ pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo);
+ }
+ if (cfg->msg.address_hi != msg->address_hi) {
+ pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
+ pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi);
+ }
+ if (cfg->update)
+ cfg->update(cfg->dev, irq, msg);
spin_unlock_irqrestore(&ht_irq_lock, flags);
+ cfg->msg = *msg;
}
-void write_ht_irq_high(unsigned int irq, u32 data)
+void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
- unsigned long flags;
- spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
- pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
- spin_unlock_irqrestore(&ht_irq_lock, flags);
-}
-
-u32 read_ht_irq_low(unsigned int irq)
-{
- struct ht_irq_cfg *cfg = get_irq_data(irq);
- unsigned long flags;
- u32 data;
- spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
- pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
- spin_unlock_irqrestore(&ht_irq_lock, flags);
- return data;
-}
-
-u32 read_ht_irq_high(unsigned int irq)
-{
- struct ht_irq_cfg *cfg = get_irq_data(irq);
- unsigned long flags;
- u32 data;
- spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
- pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
- spin_unlock_irqrestore(&ht_irq_lock, flags);
- return data;
+ *msg = cfg->msg;
}
void mask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
- unsigned long flags;
- u32 data;
+ struct ht_irq_msg msg;
cfg = get_irq_data(irq);
- spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
- pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
- data |= 1;
- pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
- spin_unlock_irqrestore(&ht_irq_lock, flags);
+ msg = cfg->msg;
+ msg.address_lo |= 1;
+ write_ht_irq_msg(irq, &msg);
}
void unmask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
- unsigned long flags;
- u32 data;
+ struct ht_irq_msg msg;
cfg = get_irq_data(irq);
- spin_lock_irqsave(&ht_irq_lock, flags);
- pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
- pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
- data &= ~1;
- pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
- spin_unlock_irqrestore(&ht_irq_lock, flags);
+ msg = cfg->msg;
+ msg.address_lo &= ~1;
+ write_ht_irq_msg(irq, &msg);
}
/**
- * ht_create_irq - create an irq and attach it to a device.
+ * __ht_create_irq - create an irq and attach it to a device.
* @dev: The hypertransport device to find the irq capability on.
* @idx: Which of the possible irqs to attach to.
- *
- * ht_create_irq is needs to be called for all hypertransport devices
- * that generate irqs.
+ * @update: Function to be called when changing the htirq message
*
* The irq number of the new irq or a negative error value is returned.
*/
-int ht_create_irq(struct pci_dev *dev, int idx)
+int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
{
struct ht_irq_cfg *cfg;
unsigned long flags;
@@ -150,8 +125,12 @@
return -ENOMEM;
cfg->dev = dev;
+ cfg->update = update;
cfg->pos = pos;
cfg->idx = 0x10 + (idx * 2);
+ /* Initialize msg to a value that will never match the first write. */
+ cfg->msg.address_lo = 0xffffffff;
+ cfg->msg.address_hi = 0xffffffff;
irq = create_irq();
if (irq < 0) {
@@ -169,6 +148,21 @@
}
/**
+ * ht_create_irq - create an irq and attach it to a device.
+ * @dev: The hypertransport device to find the irq capability on.
+ * @idx: Which of the possible irqs to attach to.
+ *
+ * ht_create_irq needs to be called for all hypertransport devices
+ * that generate irqs.
+ *
+ * The irq number of the new irq or a negative error value is returned.
+ */
+int ht_create_irq(struct pci_dev *dev, int idx)
+{
+ return __ht_create_irq(dev, idx, NULL);
+}
+
+/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
*
* This reverses ht_create_irq removing the specified irq from
@@ -186,5 +180,6 @@
kfree(cfg);
}
+EXPORT_SYMBOL(__ht_create_irq);
EXPORT_SYMBOL(ht_create_irq);
EXPORT_SYMBOL(ht_destroy_irq);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a1d2e97..f952bfe 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -642,6 +642,9 @@
*/
void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
{
+ if (!sysfs_initialized)
+ return;
+
if (pdev->cfg_size < 4096)
sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr);
else
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index fd9e281..94a2746 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -631,12 +631,22 @@
* scanning run at their own risk, or supply a user level program
* that can correctly scan.
*/
- sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC);
- if (sdev->inquiry == NULL) {
- return SCSI_SCAN_NO_RESPONSE;
- }
- memcpy(sdev->inquiry, inq_result, sdev->inquiry_len);
+ /*
+ * Copy at least 36 bytes of INQUIRY data, so that we don't
+ * dereference unallocated memory when accessing the Vendor,
+ * Product, and Revision strings. Badly behaved devices may set
+ * the INQUIRY Additional Length byte to a small value, indicating
+ * these strings are invalid, but often they contain plausible data
+ * nonetheless. It doesn't matter if the device sent < 36 bytes
+ * total, since scsi_probe_lun() initializes inq_result with 0s.
+ */
+ sdev->inquiry = kmemdup(inq_result,
+ max_t(size_t, sdev->inquiry_len, 36),
+ GFP_ATOMIC);
+ if (sdev->inquiry == NULL)
+ return SCSI_SCAN_NO_RESPONSE;
+
sdev->vendor = (char *) (sdev->inquiry + 8);
sdev->model = (char *) (sdev->inquiry + 16);
sdev->rev = (char *) (sdev->inquiry + 32);
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c..69715e5 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@
/* these are located in their respective files */
void cpm_line_cr_cmd(int line, int cmd);
-int cpm_uart_init_portdesc(void);
+int __init cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 0abb544..7a3b97f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -195,10 +195,8 @@
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
- pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
@@ -421,9 +419,10 @@
/* Startup rx-int */
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
} else {
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
if (!(pinfo->flags & FLAG_CONSOLE))
@@ -1350,11 +1349,10 @@
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
pr_info(
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
- ret = cpm_uart_init_portdesc();
- if (ret)
- return ret;
-#endif
+
+ /* Don't run this again, if the console driver did it already */
+ if (cpm_uart_nr == 0)
+ cpm_uart_init_portdesc();
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
@@ -1366,6 +1364,8 @@
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ if (cpm_uart_ports[con].set_lineif)
+ cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 95afc37..08e55fd 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -184,7 +184,7 @@
}
/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 146298a..c3c0626 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -281,7 +281,6 @@
up(&board_lock);
return 0;
}
-EXPORT_SYMBOL_GPL(spi_register_board_info);
/* FIXME someone should add support for a __setup("spi", ...) that
* creates board info from kernel command lines
diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
index fbea454..8d69bcd 100644
--- a/drivers/telephony/ixj.h
+++ b/drivers/telephony/ixj.h
@@ -1295,7 +1295,7 @@
Proc_Info_Type Info_write;
unsigned short frame_count;
unsigned int filter_hist[4];
- unsigned char filter_en[4];
+ unsigned char filter_en[6];
unsigned short proc_load;
unsigned long framesread;
unsigned long frameswritten;
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 809d465..6303970 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -722,6 +722,7 @@
usblp->wcomplete = 0;
err = usb_submit_urb(usblp->writeurb, GFP_KERNEL);
if (err) {
+ usblp->wcomplete = 1;
if (err != -ENOMEM)
count = -EIO;
else
@@ -1202,8 +1203,6 @@
down (&usblp->sem);
/* we take no more IO */
usblp->sleeping = 1;
- /* we wait for anything printing */
- wait_event (usblp->wait, usblp->wcomplete || !usblp->present);
usblp_unlink_urbs(usblp);
up (&usblp->sem);
mutex_unlock (&usblp_mutex);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 66bff18..ba165af 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1188,6 +1188,7 @@
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
+static int __usb_port_suspend(struct usb_device *, int port1);
#endif
/**
@@ -1289,8 +1290,6 @@
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_port_suspend(struct usb_device *,
- int port1);
err = __usb_port_suspend(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 45f44fe..6daf85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -270,7 +270,7 @@
* Read data value from item.
*/
-static __inline__ __u32 item_udata(struct hid_item *item)
+static u32 item_udata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.u8;
@@ -280,7 +280,7 @@
return 0;
}
-static __inline__ __s32 item_sdata(struct hid_item *item)
+static s32 item_sdata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.s8;
@@ -727,7 +727,7 @@
* done by hand.
*/
-static __inline__ __s32 snto32(__u32 value, unsigned n)
+static s32 snto32(__u32 value, unsigned n)
{
switch (n) {
case 8: return ((__s8)value);
@@ -741,9 +741,9 @@
* Convert a signed 32-bit integer to a signed n-bit integer.
*/
-static __inline__ __u32 s32ton(__s32 value, unsigned n)
+static u32 s32ton(__s32 value, unsigned n)
{
- __s32 a = value >> (n - 1);
+ s32 a = value >> (n - 1);
if (a && a != -1)
return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
return value & ((1 << n) - 1);
@@ -751,30 +751,55 @@
/*
* Extract/implement a data field from/to a little endian report (bit array).
+ *
+ * Code sort-of follows HID spec:
+ * http://www.usb.org/developers/devclass_docs/HID1_11.pdf
+ *
+ * While the USB HID spec allows unlimited length bit fields in "report
+ * descriptors", most devices never use more than 16 bits.
+ * One model of UPS is claimed to report "LINEV" as a 32-bit field.
+ * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
*/
static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
{
- u32 x;
+ u64 x;
+
+ WARN_ON(n > 32);
report += offset >> 3; /* adjust byte index */
- offset &= 8 - 1;
- x = get_unaligned((u32 *) report);
- x = le32_to_cpu(x);
- x = (x >> offset) & ((1 << n) - 1);
- return x;
+ offset &= 7; /* now only need bit offset into one byte */
+ x = get_unaligned((u64 *) report);
+ x = le64_to_cpu(x);
+ x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */
+ return (u32) x;
}
+/*
+ * "implement" : set bits in a little endian bit stream.
+ * Same concepts as "extract" (see comments above).
+ * The data mangled in the bit stream remains in little endian
+ * order the whole time. It make more sense to talk about
+ * endianness of register values by considering a register
+ * a "cached" copy of the little endiad bit stream.
+ */
static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
{
- u32 x;
+ u64 x;
+ u64 m = (1ULL << n) - 1;
+
+ WARN_ON(n > 32);
+
+ WARN_ON(value > m);
+ value &= m;
report += offset >> 3;
- offset &= 8 - 1;
- x = get_unaligned((u32 *)report);
- x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset));
- x |= cpu_to_le32(value << offset);
- put_unaligned(x,(u32 *)report);
+ offset &= 7;
+
+ x = get_unaligned((u64 *)report);
+ x &= cpu_to_le64(~(m << offset));
+ x |= cpu_to_le64(((u64) value) << offset);
+ put_unaligned(x, (u64 *) report);
}
/*
@@ -1615,6 +1640,9 @@
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
+#define USB_VENDOR_ID_AIRCABLE 0x16CA
+#define USB_DEVICE_ID_AIRCABLE1 0x1502
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1632,6 +1660,7 @@
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 2902742..933cedd 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -640,7 +640,7 @@
type->max_press, 0, 0);
usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, 0x81),
+ usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index 6a12a94..df97e5c 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -2,6 +2,10 @@
* X-Box gamepad - v0.0.6
*
* Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
+ * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ * Steven Toth <steve@toth.demon.co.uk>,
+ * Franz Lehner <franz@caos.at>,
+ * Ivan Hawkes <blackhawk@ivanhawkes.com>
* 2005 Dominic Cerquetti <binary1230@yahoo.com>
* 2006 Adam Buchbinder <adam.buchbinder@gmail.com>
*
@@ -29,6 +33,7 @@
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
+ * - XBOX Linux project - extra USB id's
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -54,6 +59,13 @@
* - fixed d-pad to axes mapping
*
* 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ * - borrowed from the XBOX linux kernel
+ * - USB id's for commonly used dance pads are present
+ * - dance pads will map D-PAD to buttons, not axes
+ * - pass the module paramater 'dpad_to_buttons' to force
+ * the D-PAD to map to buttons if your pad is not detected
*/
#include <linux/kernel.h>
@@ -90,8 +102,35 @@
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+ { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
};
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 454a186..e081836 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -92,8 +92,13 @@
To compile this driver as a module, choose M here: the
module will be called rtl8150.
+config USB_USBNET_MII
+ tristate
+ default n
+
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
+ select MII if USBNET_MII != n
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -129,7 +134,7 @@
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
- select MII
+ select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -210,6 +215,7 @@
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
depends on USB_USBNET
+ select USB_USBNET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 4087363..760b532 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -669,6 +669,9 @@
* they'll probably want to use this base set.
*/
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -699,20 +702,6 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_settings);
-
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
-{
- struct usbnet *dev = netdev_priv(net);
-
- /* REVISIT don't always return "usbnet" */
- strncpy (info->driver, driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
- sizeof info->fw_version);
- usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
-
u32 usbnet_get_link (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -730,6 +719,32 @@
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
+int usbnet_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+#endif /* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ /* REVISIT don't always return "usbnet" */
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strncpy (info->fw_version, dev->driver_info->description,
+ sizeof info->fw_version);
+ usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+
u32 usbnet_get_msglevel (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -746,24 +761,15 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-int usbnet_nway_reset(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
-
- if (!dev->mii.mdio_write)
- return -EOPNOTSUPP;
-
- return mii_nway_restart(&dev->mii);
-}
-EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
+#ifdef HAVE_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
- .get_drvinfo = usbnet_get_drvinfo,
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
+#endif
+ .get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
};
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9a6ec1b..2a8dd4c 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -54,10 +54,10 @@
properly.
config USB_SERIAL_AIRCABLE
- tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
+ tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
help
- Say Y here if you want to use AIRcable USB Bluetoot Dongle.
+ Say Y here if you want to use USB AIRcable Bluetooth Dongle.
To compile this driver as a module, choose M here: the module
will be called aircable.
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index bbf6532..f95d42c 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -64,6 +64,9 @@
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea16572..4b5097f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -35,6 +35,7 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
@@ -58,8 +59,10 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 37ed8e0..bc1ac07 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1236,7 +1236,7 @@
"Cowon Systems",
"iAUDIO M5",
US_SC_DEVICE, US_PR_BULK, NULL,
- 0 ),
+ US_FL_NEED_OVERRIDE ),
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
@@ -1313,6 +1313,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P990i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c
index 9ed640d..ea42611 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/nvidia/nv_hw.c
@@ -145,12 +145,18 @@
if (par->Architecture >= NV_ARCH_40) {
pll = NV_RD32(par->PMC, 0x4020);
- P = (pll >> 16) & 0x03;
+ P = (pll >> 16) & 0x07;
pll = NV_RD32(par->PMC, 0x4024);
M = pll & 0xFF;
N = (pll >> 8) & 0xFF;
- MB = (pll >> 16) & 0xFF;
- NB = (pll >> 24) & 0xFF;
+ if (((par->Chipset & 0xfff0) == 0x0290) ||
+ ((par->Chipset & 0xfff0) == 0x0390)) {
+ MB = 1;
+ NB = 1;
+ } else {
+ MB = (pll >> 16) & 0xFF;
+ NB = (pll >> 24) & 0xFF;
+ }
*MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P;
pll = NV_RD32(par->PMC, 0x4000);
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c
index a18a9ae..61dc46f 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/nvidia/nv_setup.c
@@ -359,6 +359,7 @@
case 0x0186:
case 0x0187:
case 0x018D:
+ case 0x0228:
case 0x0286:
case 0x028C:
case 0x0316:
@@ -382,6 +383,10 @@
case 0x034C:
case 0x0160:
case 0x0166:
+ case 0x0169:
+ case 0x016B:
+ case 0x016C:
+ case 0x016D:
case 0x00C8:
case 0x00CC:
case 0x0144:
@@ -639,12 +644,23 @@
par->fpHeight = NV_RD32(par->PRAMDAC, 0x0800) + 1;
par->fpSyncs = NV_RD32(par->PRAMDAC, 0x0848) & 0x30000033;
- printk("Panel size is %i x %i\n", par->fpWidth, par->fpHeight);
+ printk("nvidiafb: Panel size is %i x %i\n", par->fpWidth, par->fpHeight);
}
if (monA)
info->monspecs = *monA;
+ if (!par->FlatPanel || !par->twoHeads)
+ par->FPDither = 0;
+
+ par->LVDS = 0;
+ if (par->FlatPanel && par->twoHeads) {
+ NV_WR32(par->PRAMDAC0, 0x08B0, 0x00010004);
+ if (par->PRAMDAC0[0x08b4] & 1)
+ par->LVDS = 1;
+ printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS");
+ }
+
kfree(edidA);
kfree(edidB);
done:
diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/nvidia/nv_type.h
index acdc266..86e65de 100644
--- a/drivers/video/nvidia/nv_type.h
+++ b/drivers/video/nvidia/nv_type.h
@@ -129,6 +129,7 @@
int fpHeight;
int PanelTweak;
int paneltweak;
+ int LVDS;
int pm_state;
u32 crtcSync_read;
u32 fpSyncs;
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index eb24107..538e947 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -1160,20 +1160,20 @@
case 0x0340: /* GeForceFX 5700 */
arch = NV_ARCH_30;
break;
- case 0x0040:
- case 0x00C0:
- case 0x0120:
+ case 0x0040: /* GeForce 6800 */
+ case 0x00C0: /* GeForce 6800 */
+ case 0x0120: /* GeForce 6800 */
case 0x0130:
- case 0x0140:
- case 0x0160:
- case 0x01D0:
- case 0x0090:
- case 0x0210:
- case 0x0220:
+ case 0x0140: /* GeForce 6600 */
+ case 0x0160: /* GeForce 6200 */
+ case 0x01D0: /* GeForce 7200, 7300, 7400 */
+ case 0x0090: /* GeForce 7800 */
+ case 0x0210: /* GeForce 6800 */
+ case 0x0220: /* GeForce 6200 */
case 0x0230:
- case 0x0240:
- case 0x0290:
- case 0x0390:
+ case 0x0240: /* GeForce 6100 */
+ case 0x0290: /* GeForce 7900 */
+ case 0x0390: /* GeForce 7600 */
arch = NV_ARCH_40;
break;
case 0x0020: /* TNT, TNT2 */
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1eb9a2e..0b3c37e 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,6 +1,11 @@
Version 1.46
------------
Support deep tree mounts. Better support OS/2, Win9x (DOS) time stamps.
+Allow null user to be specified on mount ("username="). Do not return
+EINVAL on readdir when filldir fails due to overwritten blocksize
+(fixes FC problem). Return error in rename 2nd attempt retry (ie report
+if rename by handle also fails, after rename by path fails, we were
+not reporting whether the retry worked or not).
Version 1.45
------------
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4093d53..71f7791 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -822,10 +822,13 @@
} else if (strnicmp(data, "nouser_xattr",12) == 0) {
vol->no_xattr = 1;
} else if (strnicmp(data, "user", 4) == 0) {
- if (!value || !*value) {
+ if (!value) {
printk(KERN_WARNING
"CIFS: invalid or missing username\n");
return 1; /* needs_arg; */
+ } else if(!*value) {
+ /* null user, ie anonymous, authentication */
+ vol->nullauth = 1;
}
if (strnlen(value, 200) < 200) {
vol->username = value;
@@ -1642,6 +1645,8 @@
/* BB fixme parse for domain name here */
cFYI(1, ("Username: %s ", volume_info.username));
+ } else if (volume_info.nullauth) {
+ cFYI(1,("null user"));
} else {
cifserror("No username specified");
/* In userspace mount helper we can get user name from alternate
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 976a691..2436ed8 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -492,10 +492,14 @@
the struct would be in each open file,
but this should give enough time to
clear the socket */
- cERROR(1,("close with pending writes"));
+#ifdef CONFIG_CIFS_DEBUG2
+ cFYI(1,("close delay, write pending"));
+#endif /* DEBUG2 */
msleep(timeout);
timeout *= 4;
- }
+ }
+ if(atomic_read(&pSMBFile->wrtPending))
+ cERROR(1,("close with pending writes"));
rc = CIFSSMBClose(xid, pTcon,
pSMBFile->netfid);
}
@@ -1806,13 +1810,6 @@
}
if ((rc < 0) || (smb_read_data == NULL)) {
cFYI(1, ("Read error in readpages: %d", rc));
- /* clean up remaing pages off list */
- while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev, struct page,
- lru);
- list_del(&page->lru);
- page_cache_release(page);
- }
break;
} else if (bytes_read > 0) {
pSMBr = (struct smb_com_read_rsp *)smb_read_data;
@@ -1831,13 +1828,7 @@
this case is ok - if we are at server EOF
we will hit it on next read */
- /* while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev,
- struct page, list);
- list_del(&page->list);
- page_cache_release(page);
- }
- break; */
+ /* break; */
}
} else {
cFYI(1, ("No bytes read (%d) at offset %lld . "
@@ -1845,14 +1836,6 @@
bytes_read, offset));
/* BB turn off caching and do new lookup on
file size at server? */
- while (!list_empty(page_list) && (i < num_pages)) {
- page = list_entry(page_list->prev, struct page,
- lru);
- list_del(&page->lru);
-
- /* BB removeme - replace with zero of page? */
- page_cache_release(page);
- }
break;
}
if (smb_read_data) {
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 35d54bb..1ad8c9f 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -885,10 +885,14 @@
kmalloc(2 * sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
if (info_buf_source != NULL) {
info_buf_target = info_buf_source + 1;
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, fromName,
- info_buf_source, cifs_sb_source->local_nls,
- cifs_sb_source->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (pTcon->ses->capabilities & CAP_UNIX)
+ rc = CIFSSMBUnixQPathInfo(xid, pTcon, fromName,
+ info_buf_source,
+ cifs_sb_source->local_nls,
+ cifs_sb_source->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ /* else rc is still EEXIST so will fall through to
+ unlink the target and retry rename */
if (rc == 0) {
rc = CIFSSMBUnixQPathInfo(xid, pTcon, toName,
info_buf_target,
@@ -937,7 +941,7 @@
cifs_sb_source->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc==0) {
- CIFSSMBRenameOpenFile(xid, pTcon, netfid, toName,
+ rc = CIFSSMBRenameOpenFile(xid, pTcon, netfid, toName,
cifs_sb_source->local_nls,
cifs_sb_source->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
@@ -1085,8 +1089,10 @@
struct kstat *stat)
{
int err = cifs_revalidate(dentry);
- if (!err)
+ if (!err) {
generic_fillattr(dentry->d_inode, stat);
+ stat->blksize = CIFS_MAX_MSGSIZE;
+ }
return err;
}
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index b5b0a2a..ed18c39 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -896,6 +896,10 @@
tmp_inode->i_ino,obj_type);
if(rc) {
cFYI(1,("filldir rc = %d",rc));
+ /* we can not return filldir errors to the caller
+ since they are "normal" when the stat blocksize
+ is too small - we return remapped error instead */
+ rc = -EOVERFLOW;
}
dput(tmp_dentry);
@@ -1074,6 +1078,11 @@
we want to check for that here? */
rc = cifs_filldir(current_entry, file,
filldir, direntry, tmp_buf, max_len);
+ if(rc == -EOVERFLOW) {
+ rc = 0;
+ break;
+ }
+
file->f_pos++;
if(file->f_pos ==
cifsFile->srch_inf.index_of_last_entry) {
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index a8a0835..bbdda99 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -90,7 +90,9 @@
} */
/* copy user */
if(ses->userName == NULL) {
- /* BB what about null user mounts - check that we do this BB */
+ /* null user mount */
+ *bcc_ptr = 0;
+ *(bcc_ptr+1) = 0;
} else { /* 300 should be long enough for any conceivable user name */
bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->userName,
300, nls_cp);
@@ -98,10 +100,13 @@
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* account for null termination */
/* copy domain */
- if(ses->domainName == NULL)
- bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr,
- "CIFS_LINUX_DOM", 32, nls_cp);
- else
+ if(ses->domainName == NULL) {
+ /* Sending null domain better than using a bogus domain name (as
+ we did briefly in 2.6.18) since server will use its default */
+ *bcc_ptr = 0;
+ *(bcc_ptr+1) = 0;
+ bytes_ret = 0;
+ } else
bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->domainName,
256, nls_cp);
bcc_ptr += 2 * bytes_ret;
@@ -144,13 +149,11 @@
/* copy domain */
- if(ses->domainName == NULL) {
- strcpy(bcc_ptr, "CIFS_LINUX_DOM");
- bcc_ptr += 14; /* strlen(CIFS_LINUX_DOM) */
- } else {
+ if(ses->domainName != NULL) {
strncpy(bcc_ptr, ses->domainName, 256);
bcc_ptr += strnlen(ses->domainName, 256);
- }
+ } /* else we will send a null domain name
+ so the server will default to its own domain */
*bcc_ptr = 0;
bcc_ptr++;
diff --git a/fs/compat.c b/fs/compat.c
index 50624d4..8d0a001 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1835,9 +1835,12 @@
} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
- if (ret == 0 && tsp && !(current->personality & STICKY_TIMEOUTS)) {
+ if (tsp) {
struct compat_timespec rts;
+ if (current->personality & STICKY_TIMEOUTS)
+ goto sticky;
+
rts.tv_sec = timeout / HZ;
rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
if (rts.tv_nsec >= NSEC_PER_SEC) {
@@ -1846,8 +1849,19 @@
}
if (compat_timespec_compare(&rts, &ts) >= 0)
rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts)))
- ret = -EFAULT;
+ if (copy_to_user(tsp, &rts, sizeof(rts))) {
+sticky:
+ /*
+ * If an application puts its timeval in read-only
+ * memory, we don't want the Linux-specific update to
+ * the timeval to cause a fault after the select has
+ * completed successfully. However, because we're not
+ * updating the timeval, we can't restart the system
+ * call.
+ */
+ if (ret == -ERESTARTNOHAND)
+ ret = -EINTR;
+ }
}
if (ret == -ERESTARTNOHAND) {
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 109333c..f8842ca 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -43,6 +43,10 @@
ssize_t ret = len;
int n = simple_strtol(buf, NULL, 0);
+ ls = dlm_find_lockspace_local(ls->ls_local_handle);
+ if (!ls)
+ return -EINVAL;
+
switch (n) {
case 0:
dlm_ls_stop(ls);
@@ -53,6 +57,7 @@
default:
ret = -EINVAL;
}
+ dlm_put_lockspace(ls);
return ret;
}
@@ -143,6 +148,12 @@
return a->store ? a->store(ls, buf, len) : len;
}
+static void lockspace_kobj_release(struct kobject *k)
+{
+ struct dlm_ls *ls = container_of(k, struct dlm_ls, ls_kobj);
+ kfree(ls);
+}
+
static struct sysfs_ops dlm_attr_ops = {
.show = dlm_attr_show,
.store = dlm_attr_store,
@@ -151,6 +162,7 @@
static struct kobj_type dlm_ktype = {
.default_attrs = dlm_attrs,
.sysfs_ops = &dlm_attr_ops,
+ .release = lockspace_kobj_release,
};
static struct kset dlm_kset = {
@@ -678,7 +690,7 @@
dlm_clear_members_gone(ls);
kfree(ls->ls_node_array);
kobject_unregister(&ls->ls_kobj);
- kfree(ls);
+ /* The ls structure will be freed when the kobject is done with */
mutex_lock(&ls_lock);
ls_count--;
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index f49f105..136175a 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -134,7 +134,7 @@
algified_name_len = (chaining_modifier_len + cipher_name_len + 3);
(*algified_name) = kmalloc(algified_name_len, GFP_KERNEL);
- if (!(algified_name)) {
+ if (!(*algified_name)) {
rc = -ENOMEM;
goto out;
}
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 2bb5ace..763a50d 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -397,14 +397,14 @@
err = -EIO;
if (is_bad_inode(inode))
- goto clean_pages_up;
+ goto out;
data.file = file;
data.inode = inode;
data.req = fuse_get_req(fc);
err = PTR_ERR(data.req);
if (IS_ERR(data.req))
- goto clean_pages_up;
+ goto out;
err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
if (!err) {
@@ -413,10 +413,7 @@
else
fuse_put_request(fc, data.req);
}
- return err;
-
-clean_pages_up:
- put_pages_list(pages);
+out:
return err;
}
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 57c43ac..d470e52 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -157,6 +157,9 @@
struct gfs2_glock *io_gl;
int error;
+ if (!inode)
+ return ERR_PTR(-ENOBUFS);
+
if (inode->i_state & I_NEW) {
struct gfs2_sbd *sdp = GFS2_SB(inode);
umode_t mode = DT2IF(type);
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 21508a1..9889c1e 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -84,8 +84,8 @@
gfs2_inode_cachep = kmem_cache_create("gfs2_inode",
sizeof(struct gfs2_inode),
- 0, (SLAB_RECLAIM_ACCOUNT|
- SLAB_PANIC|SLAB_MEM_SPREAD),
+ 0, SLAB_RECLAIM_ACCOUNT|
+ SLAB_MEM_SPREAD,
gfs2_init_inode_once, NULL);
if (!gfs2_inode_cachep)
goto fail;
diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c
index 8d5963c..015640b 100644
--- a/fs/gfs2/ops_address.c
+++ b/fs/gfs2/ops_address.c
@@ -337,13 +337,6 @@
out_noerror:
ret = 0;
out_unlock:
- /* unlock all pages, we can't do any I/O right now */
- for (page_idx = 0; page_idx < nr_pages; page_idx++) {
- struct page *page = list_entry(pages->prev, struct page, lru);
- list_del(&page->lru);
- unlock_page(page);
- page_cache_release(page);
- }
if (do_unlock)
gfs2_holder_uninit(&gh);
goto out;
diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c
index 06f06f7..b47d959 100644
--- a/fs/gfs2/ops_super.c
+++ b/fs/gfs2/ops_super.c
@@ -138,16 +138,27 @@
}
/**
- * gfs2_write_super - disk commit all incore transactions
- * @sb: the filesystem
+ * gfs2_write_super
+ * @sb: the superblock
*
- * This function is called every time sync(2) is called.
- * After this exits, all dirty buffers are synced.
*/
static void gfs2_write_super(struct super_block *sb)
{
+ sb->s_dirt = 0;
+}
+
+/**
+ * gfs2_sync_fs - sync the filesystem
+ * @sb: the superblock
+ *
+ * Flushes the log to disk.
+ */
+static int gfs2_sync_fs(struct super_block *sb, int wait)
+{
+ sb->s_dirt = 0;
gfs2_log_flush(sb->s_fs_info, NULL);
+ return 0;
}
/**
@@ -452,17 +463,18 @@
}
struct super_operations gfs2_super_ops = {
- .alloc_inode = gfs2_alloc_inode,
- .destroy_inode = gfs2_destroy_inode,
- .write_inode = gfs2_write_inode,
- .delete_inode = gfs2_delete_inode,
- .put_super = gfs2_put_super,
- .write_super = gfs2_write_super,
- .write_super_lockfs = gfs2_write_super_lockfs,
- .unlockfs = gfs2_unlockfs,
- .statfs = gfs2_statfs,
- .remount_fs = gfs2_remount_fs,
- .clear_inode = gfs2_clear_inode,
- .show_options = gfs2_show_options,
+ .alloc_inode = gfs2_alloc_inode,
+ .destroy_inode = gfs2_destroy_inode,
+ .write_inode = gfs2_write_inode,
+ .delete_inode = gfs2_delete_inode,
+ .put_super = gfs2_put_super,
+ .write_super = gfs2_write_super,
+ .sync_fs = gfs2_sync_fs,
+ .write_super_lockfs = gfs2_write_super_lockfs,
+ .unlockfs = gfs2_unlockfs,
+ .statfs = gfs2_statfs,
+ .remount_fs = gfs2_remount_fs,
+ .clear_inode = gfs2_clear_inode,
+ .show_options = gfs2_show_options,
};
diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index 4c7985e..b753ba2 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -756,6 +756,11 @@
return -EOPNOTSUPP;
}
+/*
+ * Most of the permission checking is done by xattr_permission in the vfs.
+ * The local file system is responsible for handling the system.* namespace.
+ * We also need to verify that this is a namespace that we recognize.
+ */
static int can_set_xattr(struct inode *inode, const char *name,
const void *value, size_t value_len)
{
@@ -771,10 +776,6 @@
strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN))
return -EOPNOTSUPP;
- if (!S_ISREG(inode->i_mode) &&
- (!S_ISDIR(inode->i_mode) || inode->i_mode &S_ISVTX))
- return -EPERM;
-
return 0;
}
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 6341392..8ca1808 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -353,9 +353,6 @@
* Sysctl parameters (same as module parameters, different interface).
*/
-/* Something that isn't CTL_ANY, CTL_NONE or a value that may clash. */
-#define CTL_UNNUMBERED -2
-
static ctl_table nlm_sysctls[] = {
{
.ctl_name = CTL_UNNUMBERED,
diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c
index 2fe3403..3ea50ac 100644
--- a/fs/nfs/sysctl.c
+++ b/fs/nfs/sysctl.c
@@ -18,11 +18,6 @@
static const int nfs_set_port_min = 0;
static const int nfs_set_port_max = 65535;
static struct ctl_table_header *nfs_callback_sysctl_table;
-/*
- * Something that isn't CTL_ANY, CTL_NONE or a value that may clash.
- * Use the same values as fs/lockd/svc.c
- */
-#define CTL_UNNUMBERED -2
static ctl_table nfs_cb_sysctls[] = {
#ifdef CONFIG_NFS_V4
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 64db601..7f5bad0 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -258,7 +258,7 @@
/* Now create the file and set attributes */
nfserr = nfsd_create_v3(rqstp, dirfhp, argp->name, argp->len,
attr, newfhp,
- argp->createmode, argp->verf, NULL);
+ argp->createmode, argp->verf, NULL, NULL);
RETURN_STATUS(nfserr);
}
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 0a7bbdc..50bc942 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -93,6 +93,7 @@
{
struct svc_fh resfh;
__be32 status;
+ int created = 0;
fh_init(&resfh, NFS4_FHSIZE);
open->op_truncate = 0;
@@ -105,28 +106,27 @@
status = nfsd_create_v3(rqstp, current_fh, open->op_fname.data,
open->op_fname.len, &open->op_iattr,
&resfh, open->op_createmode,
- (u32 *)open->op_verf.data, &open->op_truncate);
- }
- else {
+ (u32 *)open->op_verf.data, &open->op_truncate, &created);
+ } else {
status = nfsd_lookup(rqstp, current_fh,
open->op_fname.data, open->op_fname.len, &resfh);
fh_unlock(current_fh);
}
+ if (status)
+ goto out;
- if (!status) {
- set_change_info(&open->op_cinfo, current_fh);
+ set_change_info(&open->op_cinfo, current_fh);
- /* set reply cache */
- fh_dup2(current_fh, &resfh);
- open->op_stateowner->so_replay.rp_openfh_len =
- resfh.fh_handle.fh_size;
- memcpy(open->op_stateowner->so_replay.rp_openfh,
- &resfh.fh_handle.fh_base,
- resfh.fh_handle.fh_size);
+ /* set reply cache */
+ fh_dup2(current_fh, &resfh);
+ open->op_stateowner->so_replay.rp_openfh_len = resfh.fh_handle.fh_size;
+ memcpy(open->op_stateowner->so_replay.rp_openfh,
+ &resfh.fh_handle.fh_base, resfh.fh_handle.fh_size);
+ if (!created)
status = do_open_permission(rqstp, current_fh, open, MAY_NOP);
- }
+out:
fh_put(&resfh);
return status;
}
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index e9d0770..81b8565 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -274,7 +274,7 @@
* any regular files anyway, just in case the directory was created by
* a kernel from the future.... */
nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
- mutex_lock(&dir->d_inode->i_mutex);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
status = vfs_rmdir(dir->d_inode, dentry);
mutex_unlock(&dir->d_inode->i_mutex);
return status;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index f21e917..bb4d926 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1177,7 +1177,7 @@
/*
* Get the dir op function pointer.
*/
- err = nfserr_perm;
+ err = 0;
switch (type) {
case S_IFREG:
host_err = vfs_create(dirp, dchild, iap->ia_mode, NULL);
@@ -1237,7 +1237,7 @@
nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp,
char *fname, int flen, struct iattr *iap,
struct svc_fh *resfhp, int createmode, u32 *verifier,
- int *truncp)
+ int *truncp, int *created)
{
struct dentry *dentry, *dchild = NULL;
struct inode *dirp;
@@ -1331,6 +1331,8 @@
host_err = vfs_create(dirp, dchild, iap->ia_mode, NULL);
if (host_err < 0)
goto out_nfserr;
+ if (created)
+ *created = 1;
if (EX_ISSYNC(fhp->fh_export)) {
err = nfserrno(nfsd_sync_dir(dentry));
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 9041802..1724999 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1619,6 +1619,7 @@
"jmacd-8: reiserfs_fill_super: unable to read bitmap");
goto error;
}
+ errval = -EINVAL;
#ifdef CONFIG_REISERFS_CHECK
SWARN(silent, s, "CONFIG_REISERFS_CHECK is set ON");
SWARN(silent, s, "- it is slow mode for debugging.");
diff --git a/fs/splice.c b/fs/splice.c
index 8d70595..da74583 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1109,6 +1109,19 @@
EXPORT_SYMBOL(do_splice_direct);
/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+static inline struct pipe_inode_info *pipe_info(struct inode *inode)
+{
+ if (S_ISFIFO(inode->i_mode))
+ return inode->i_pipe;
+
+ return NULL;
+}
+
+/*
* Determine where to splice to/from.
*/
static long do_splice(struct file *in, loff_t __user *off_in,
@@ -1119,7 +1132,7 @@
loff_t offset, *off;
long ret;
- pipe = in->f_dentry->d_inode->i_pipe;
+ pipe = pipe_info(in->f_dentry->d_inode);
if (pipe) {
if (off_in)
return -ESPIPE;
@@ -1140,7 +1153,7 @@
return ret;
}
- pipe = out->f_dentry->d_inode->i_pipe;
+ pipe = pipe_info(out->f_dentry->d_inode);
if (pipe) {
if (off_out)
return -ESPIPE;
@@ -1298,7 +1311,7 @@
static long do_vmsplice(struct file *file, const struct iovec __user *iov,
unsigned long nr_segs, unsigned int flags)
{
- struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe;
+ struct pipe_inode_info *pipe;
struct page *pages[PIPE_BUFFERS];
struct partial_page partial[PIPE_BUFFERS];
struct splice_pipe_desc spd = {
@@ -1308,7 +1321,8 @@
.ops = &user_page_pipe_buf_ops,
};
- if (unlikely(!pipe))
+ pipe = pipe_info(file->f_dentry->d_inode);
+ if (!pipe)
return -EBADF;
if (unlikely(nr_segs > UIO_MAXIOV))
return -EINVAL;
@@ -1535,8 +1549,8 @@
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
- struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
- struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
+ struct pipe_inode_info *ipipe = pipe_info(in->f_dentry->d_inode);
+ struct pipe_inode_info *opipe = pipe_info(out->f_dentry->d_inode);
int ret = -EINVAL;
/*
diff --git a/fs/xattr.c b/fs/xattr.c
index 3956351..0901bdc 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -48,14 +48,21 @@
return 0;
/*
- * The trusted.* namespace can only accessed by a privilegued user.
+ * The trusted.* namespace can only be accessed by a privileged user.
*/
if (!strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
return (capable(CAP_SYS_ADMIN) ? 0 : -EPERM);
+ /* In user.* namespace, only regular files and directories can have
+ * extended attributes. For sticky directories, only the owner and
+ * privileged user can write attributes.
+ */
if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN)) {
- if (!S_ISREG(inode->i_mode) &&
- (!S_ISDIR(inode->i_mode) || inode->i_mode & S_ISVTX))
+ if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
+ return -EPERM;
+ if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) &&
+ (mask & MAY_WRITE) && (current->fsuid != inode->i_uid) &&
+ !capable(CAP_FOWNER))
return -EPERM;
}
diff --git a/fs/xfs/Makefile-linux-2.6 b/fs/xfs/Makefile-linux-2.6
index 291948d..b49989b 100644
--- a/fs/xfs/Makefile-linux-2.6
+++ b/fs/xfs/Makefile-linux-2.6
@@ -21,22 +21,7 @@
XFS_LINUX := linux-2.6
ifeq ($(CONFIG_XFS_DEBUG),y)
- EXTRA_CFLAGS += -g -DSTATIC="" -DDEBUG
- EXTRA_CFLAGS += -DXFS_BUF_LOCK_TRACKING
-endif
-ifeq ($(CONFIG_XFS_TRACE),y)
- EXTRA_CFLAGS += -DXFS_ALLOC_TRACE
- EXTRA_CFLAGS += -DXFS_ATTR_TRACE
- EXTRA_CFLAGS += -DXFS_BLI_TRACE
- EXTRA_CFLAGS += -DXFS_BMAP_TRACE
- EXTRA_CFLAGS += -DXFS_BMBT_TRACE
- EXTRA_CFLAGS += -DXFS_DIR2_TRACE
- EXTRA_CFLAGS += -DXFS_DQUOT_TRACE
- EXTRA_CFLAGS += -DXFS_ILOCK_TRACE
- EXTRA_CFLAGS += -DXFS_LOG_TRACE
- EXTRA_CFLAGS += -DXFS_RW_TRACE
- EXTRA_CFLAGS += -DXFS_BUF_TRACE
- EXTRA_CFLAGS += -DXFS_VNODE_TRACE
+ EXTRA_CFLAGS += -g
endif
obj-$(CONFIG_XFS_FS) += xfs.o
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index db5f5a3..d338284 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -15,6 +15,7 @@
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include "xfs.h"
#include <linux/stddef.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -31,7 +32,6 @@
#include <linux/kthread.h>
#include <linux/migrate.h>
#include <linux/backing-dev.h>
-#include "xfs_linux.h"
STATIC kmem_zone_t *xfs_buf_zone;
STATIC kmem_shaker_t xfs_buf_shake;
@@ -1406,7 +1406,7 @@
btp->bt_hashshift = external ? 3 : 8; /* 8 or 256 buckets */
btp->bt_hashmask = (1 << btp->bt_hashshift) - 1;
btp->bt_hash = kmem_zalloc((1 << btp->bt_hashshift) *
- sizeof(xfs_bufhash_t), KM_SLEEP);
+ sizeof(xfs_bufhash_t), KM_SLEEP | KM_LARGE);
for (i = 0; i < (1 << btp->bt_hashshift); i++) {
spin_lock_init(&btp->bt_hash[i].bh_lock);
INIT_LIST_HEAD(&btp->bt_hash[i].bh_list);
diff --git a/fs/xfs/linux-2.6/xfs_dmapi_priv.h b/fs/xfs/linux-2.6/xfs_dmapi_priv.h
new file mode 100644
index 0000000..a8b0b16
--- /dev/null
+++ b/fs/xfs/linux-2.6/xfs_dmapi_priv.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __XFS_DMAPI_PRIV_H__
+#define __XFS_DMAPI_PRIV_H__
+
+/*
+ * Based on IO_ISDIRECT, decide which i_ flag is set.
+ */
+#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
+ DM_FLAGS_IMUX : 0)
+#define DM_SEM_FLAG_WR (DM_FLAGS_IALLOCSEM_WR | DM_FLAGS_IMUX)
+
+#endif /*__XFS_DMAPI_PRIV_H__*/
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index a74f854..74d0948 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -341,8 +341,11 @@
put_unused_fd(new_fd);
return -XFS_ERROR(-PTR_ERR(filp));
}
- if (inode->i_mode & S_IFREG)
+ if (inode->i_mode & S_IFREG) {
+ /* invisible operation should not change atime */
+ filp->f_flags |= O_NOATIME;
filp->f_op = &xfs_invis_file_operations;
+ }
fd_install(new_fd, filp);
return new_fd;
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 38c4d12..de05abb 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -227,9 +227,7 @@
xfs_revalidate_inode(XFS_BHVTOM(bdp), vp, ip);
xfs_set_inodeops(inode);
- spin_lock(&ip->i_flags_lock);
- ip->i_flags &= ~XFS_INEW;
- spin_unlock(&ip->i_flags_lock);
+ xfs_iflags_clear(ip, XFS_INEW);
barrier();
unlock_new_inode(inode);
diff --git a/fs/xfs/support/debug.c b/fs/xfs/support/debug.c
index c75f683..4363512 100644
--- a/fs/xfs/support/debug.c
+++ b/fs/xfs/support/debug.c
@@ -15,11 +15,9 @@
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <xfs.h>
#include "debug.h"
#include "spin.h"
-#include <asm/page.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
static char message[256]; /* keep it off the stack */
static DEFINE_SPINLOCK(xfs_err_lock);
diff --git a/fs/xfs/support/move.c b/fs/xfs/support/move.c
index caefa17..ac8617c 100644
--- a/fs/xfs/support/move.c
+++ b/fs/xfs/support/move.c
@@ -22,7 +22,7 @@
* as we go.
*/
int
-uio_read(caddr_t src, size_t len, struct uio *uio)
+xfs_uio_read(caddr_t src, size_t len, struct uio *uio)
{
size_t count;
diff --git a/fs/xfs/support/move.h b/fs/xfs/support/move.h
index 97a2498..977879c 100644
--- a/fs/xfs/support/move.h
+++ b/fs/xfs/support/move.h
@@ -65,6 +65,6 @@
typedef struct uio uio_t;
typedef struct iovec iovec_t;
-extern int uio_read (caddr_t, size_t, uio_t *);
+extern int xfs_uio_read (caddr_t, size_t, uio_t *);
#endif /* __XFS_SUPPORT_MOVE_H__ */
diff --git a/fs/xfs/xfs.h b/fs/xfs/xfs.h
index 1a48dbb..bf0a120 100644
--- a/fs/xfs/xfs.h
+++ b/fs/xfs/xfs.h
@@ -17,5 +17,28 @@
*/
#ifndef __XFS_H__
#define __XFS_H__
+
+#ifdef CONFIG_XFS_DEBUG
+#define STATIC
+#define DEBUG 1
+#define XFS_BUF_LOCK_TRACKING 1
+/* #define QUOTADEBUG 1 */
+#endif
+
+#ifdef CONFIG_XFS_TRACE
+#define XFS_ALLOC_TRACE 1
+#define XFS_ATTR_TRACE 1
+#define XFS_BLI_TRACE 1
+#define XFS_BMAP_TRACE 1
+#define XFS_BMBT_TRACE 1
+#define XFS_DIR2_TRACE 1
+#define XFS_DQUOT_TRACE 1
+#define XFS_ILOCK_TRACE 1
+#define XFS_LOG_TRACE 1
+#define XFS_RW_TRACE 1
+#define XFS_BUF_TRACE 1
+#define XFS_VNODE_TRACE 1
+#endif
+
#include <linux-2.6/xfs_linux.h>
#endif /* __XFS_H__ */
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index 8edbe1a..8e8e527 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -678,7 +678,7 @@
idbp->d_off = pa->cook;
idbp->d_name[namelen] = '\0';
memcpy(idbp->d_name, pa->name, namelen);
- rval = uio_read((caddr_t)idbp, reclen, uio);
+ rval = xfs_uio_read((caddr_t)idbp, reclen, uio);
pa->done = (rval == 0);
return rval;
}
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
index 4e7865a..adc3d25 100644
--- a/fs/xfs/xfs_dmapi.h
+++ b/fs/xfs/xfs_dmapi.h
@@ -157,27 +157,9 @@
#define DM_FLAGS_IALLOCSEM_WR 0x020 /* thread holds i_alloc_sem wr */
/*
- * Based on IO_ISDIRECT, decide which i_ flag is set.
+ * Pull in platform specific event flags defines
*/
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
- DM_FLAGS_IMUX : 0)
-#define DM_SEM_FLAG_WR (DM_FLAGS_IALLOCSEM_WR | DM_FLAGS_IMUX)
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) && \
- (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,22))
-#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
- DM_FLAGS_IALLOCSEM_RD : DM_FLAGS_IMUX)
-#define DM_SEM_FLAG_WR (DM_FLAGS_IALLOCSEM_WR | DM_FLAGS_IMUX)
-#endif
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,21)
-#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
- 0 : DM_FLAGS_IMUX)
-#define DM_SEM_FLAG_WR (DM_FLAGS_IMUX)
-#endif
-
+#include "xfs_dmapi_priv.h"
/*
* Macros to turn caller specified delay/block flags into
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index b73d216..c1c89da 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -215,7 +215,7 @@
* If INEW is set this inode is being set up
* we need to pause and try again.
*/
- if (ip->i_flags & XFS_INEW) {
+ if (xfs_iflags_test(ip, XFS_INEW)) {
read_unlock(&ih->ih_lock);
delay(1);
XFS_STATS_INC(xs_ig_frecycle);
@@ -230,22 +230,50 @@
* on its way out of the system,
* we need to pause and try again.
*/
- if (ip->i_flags & XFS_IRECLAIM) {
+ if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
read_unlock(&ih->ih_lock);
delay(1);
XFS_STATS_INC(xs_ig_frecycle);
goto again;
}
+ ASSERT(xfs_iflags_test(ip, XFS_IRECLAIMABLE));
+
+ /*
+ * If lookup is racing with unlink, then we
+ * should return an error immediately so we
+ * don't remove it from the reclaim list and
+ * potentially leak the inode.
+ */
+ if ((ip->i_d.di_mode == 0) &&
+ !(flags & XFS_IGET_CREATE)) {
+ read_unlock(&ih->ih_lock);
+ return ENOENT;
+ }
+
+ /*
+ * There may be transactions sitting in the
+ * incore log buffers or being flushed to disk
+ * at this time. We can't clear the
+ * XFS_IRECLAIMABLE flag until these
+ * transactions have hit the disk, otherwise we
+ * will void the guarantee the flag provides
+ * xfs_iunpin()
+ */
+ if (xfs_ipincount(ip)) {
+ read_unlock(&ih->ih_lock);
+ xfs_log_force(mp, 0,
+ XFS_LOG_FORCE|XFS_LOG_SYNC);
+ XFS_STATS_INC(xs_ig_frecycle);
+ goto again;
+ }
vn_trace_exit(vp, "xfs_iget.alloc",
(inst_t *)__return_address);
XFS_STATS_INC(xs_ig_found);
- spin_lock(&ip->i_flags_lock);
- ip->i_flags &= ~XFS_IRECLAIMABLE;
- spin_unlock(&ip->i_flags_lock);
+ xfs_iflags_clear(ip, XFS_IRECLAIMABLE);
version = ih->ih_version;
read_unlock(&ih->ih_lock);
xfs_ihash_promote(ih, ip, version);
@@ -299,10 +327,7 @@
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
- spin_lock(&ip->i_flags_lock);
- ip->i_flags &= ~XFS_ISTALE;
- spin_unlock(&ip->i_flags_lock);
-
+ xfs_iflags_clear(ip, XFS_ISTALE);
vn_trace_exit(vp, "xfs_iget.found",
(inst_t *)__return_address);
goto return_ip;
@@ -371,10 +396,7 @@
ih->ih_next = ip;
ip->i_udquot = ip->i_gdquot = NULL;
ih->ih_version++;
- spin_lock(&ip->i_flags_lock);
- ip->i_flags |= XFS_INEW;
- spin_unlock(&ip->i_flags_lock);
-
+ xfs_iflags_set(ip, XFS_INEW);
write_unlock(&ih->ih_lock);
/*
@@ -625,7 +647,7 @@
vn_trace_entry(vp, "xfs_iput_new", (inst_t *)__return_address);
if ((ip->i_d.di_mode == 0)) {
- ASSERT(!(ip->i_flags & XFS_IRECLAIMABLE));
+ ASSERT(!xfs_iflags_test(ip, XFS_IRECLAIMABLE));
vn_mark_bad(vp);
}
if (inode->i_state & I_NEW)
@@ -683,6 +705,7 @@
/*
* Free all memory associated with the inode.
*/
+ xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
xfs_idestroy(ip);
}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index c27d7d49..d72c80d 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2193,7 +2193,7 @@
/* Inode not in memory or we found it already,
* nothing to do
*/
- if (!ip || (ip->i_flags & XFS_ISTALE)) {
+ if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
read_unlock(&ih->ih_lock);
continue;
}
@@ -2215,10 +2215,7 @@
if (ip == free_ip) {
if (xfs_iflock_nowait(ip)) {
- spin_lock(&ip->i_flags_lock);
- ip->i_flags |= XFS_ISTALE;
- spin_unlock(&ip->i_flags_lock);
-
+ xfs_iflags_set(ip, XFS_ISTALE);
if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
} else {
@@ -2231,9 +2228,7 @@
if (xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
if (xfs_iflock_nowait(ip)) {
- spin_lock(&ip->i_flags_lock);
- ip->i_flags |= XFS_ISTALE;
- spin_unlock(&ip->i_flags_lock);
+ xfs_iflags_set(ip, XFS_ISTALE);
if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
@@ -2263,9 +2258,7 @@
AIL_LOCK(mp,s);
iip->ili_flush_lsn = iip->ili_item.li_lsn;
AIL_UNLOCK(mp, s);
- spin_lock(&iip->ili_inode->i_flags_lock);
- iip->ili_inode->i_flags |= XFS_ISTALE;
- spin_unlock(&iip->ili_inode->i_flags_lock);
+ xfs_iflags_set(ip, XFS_ISTALE);
pre_flushed++;
}
lip = lip->li_bio_list;
@@ -2748,42 +2741,39 @@
{
ASSERT(atomic_read(&ip->i_pincount) > 0);
- if (atomic_dec_and_test(&ip->i_pincount)) {
- /*
- * If the inode is currently being reclaimed, the
- * linux inode _and_ the xfs vnode may have been
- * freed so we cannot reference either of them safely.
- * Hence we should not try to do anything to them
- * if the xfs inode is currently in the reclaim
- * path.
- *
- * However, we still need to issue the unpin wakeup
- * call as the inode reclaim may be blocked waiting for
- * the inode to become unpinned.
- */
- struct inode *inode = NULL;
+ if (atomic_dec_and_lock(&ip->i_pincount, &ip->i_flags_lock)) {
- spin_lock(&ip->i_flags_lock);
- if (!(ip->i_flags & (XFS_IRECLAIM|XFS_IRECLAIMABLE))) {
+ /*
+ * If the inode is currently being reclaimed, the link between
+ * the bhv_vnode and the xfs_inode will be broken after the
+ * XFS_IRECLAIM* flag is set. Hence, if these flags are not
+ * set, then we can move forward and mark the linux inode dirty
+ * knowing that it is still valid as it won't freed until after
+ * the bhv_vnode<->xfs_inode link is broken in xfs_reclaim. The
+ * i_flags_lock is used to synchronise the setting of the
+ * XFS_IRECLAIM* flags and the breaking of the link, and so we
+ * can execute atomically w.r.t to reclaim by holding this lock
+ * here.
+ *
+ * However, we still need to issue the unpin wakeup call as the
+ * inode reclaim may be blocked waiting for the inode to become
+ * unpinned.
+ */
+
+ if (!__xfs_iflags_test(ip, XFS_IRECLAIM|XFS_IRECLAIMABLE)) {
bhv_vnode_t *vp = XFS_ITOV_NULL(ip);
+ struct inode *inode = NULL;
+
+ BUG_ON(vp == NULL);
+ inode = vn_to_inode(vp);
+ BUG_ON(inode->i_state & I_CLEAR);
/* make sync come back and flush this inode */
- if (vp) {
- inode = vn_to_inode(vp);
-
- if (!(inode->i_state &
- (I_NEW|I_FREEING|I_CLEAR))) {
- inode = igrab(inode);
- if (inode)
- mark_inode_dirty_sync(inode);
- } else
- inode = NULL;
- }
+ if (!(inode->i_state & (I_NEW|I_FREEING)))
+ mark_inode_dirty_sync(inode);
}
spin_unlock(&ip->i_flags_lock);
wake_up(&ip->i_ipin_wait);
- if (inode)
- iput(inode);
}
}
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index e96eb08..bc82372 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -305,6 +305,47 @@
#endif
} xfs_inode_t;
+
+/*
+ * i_flags helper functions
+ */
+static inline void
+__xfs_iflags_set(xfs_inode_t *ip, unsigned short flags)
+{
+ ip->i_flags |= flags;
+}
+
+static inline void
+xfs_iflags_set(xfs_inode_t *ip, unsigned short flags)
+{
+ spin_lock(&ip->i_flags_lock);
+ __xfs_iflags_set(ip, flags);
+ spin_unlock(&ip->i_flags_lock);
+}
+
+static inline void
+xfs_iflags_clear(xfs_inode_t *ip, unsigned short flags)
+{
+ spin_lock(&ip->i_flags_lock);
+ ip->i_flags &= ~flags;
+ spin_unlock(&ip->i_flags_lock);
+}
+
+static inline int
+__xfs_iflags_test(xfs_inode_t *ip, unsigned short flags)
+{
+ return (ip->i_flags & flags);
+}
+
+static inline int
+xfs_iflags_test(xfs_inode_t *ip, unsigned short flags)
+{
+ int ret;
+ spin_lock(&ip->i_flags_lock);
+ ret = __xfs_iflags_test(ip, flags);
+ spin_unlock(&ip->i_flags_lock);
+ return ret;
+}
#endif /* __KERNEL__ */
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 061e2ff..bda774a 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -1013,7 +1013,7 @@
pathlen = (int)ip->i_d.di_size;
if (ip->i_df.if_flags & XFS_IFINLINE) {
- error = uio_read(ip->i_df.if_u1.if_data, pathlen, uiop);
+ error = xfs_uio_read(ip->i_df.if_u1.if_data, pathlen, uiop);
}
else {
/*
@@ -1044,7 +1044,7 @@
byte_cnt = pathlen;
pathlen -= byte_cnt;
- error = uio_read(XFS_BUF_PTR(bp), byte_cnt, uiop);
+ error = xfs_uio_read(XFS_BUF_PTR(bp), byte_cnt, uiop);
xfs_buf_relse (bp);
}
@@ -3827,11 +3827,16 @@
*/
xfs_synchronize_atime(ip);
- /* If we have nothing to flush with this inode then complete the
- * teardown now, otherwise break the link between the xfs inode
- * and the linux inode and clean up the xfs inode later. This
- * avoids flushing the inode to disk during the delete operation
- * itself.
+ /*
+ * If we have nothing to flush with this inode then complete the
+ * teardown now, otherwise break the link between the xfs inode and the
+ * linux inode and clean up the xfs inode later. This avoids flushing
+ * the inode to disk during the delete operation itself.
+ *
+ * When breaking the link, we need to set the XFS_IRECLAIMABLE flag
+ * first to ensure that xfs_iunpin() will never see an xfs inode
+ * that has a linux inode being reclaimed. Synchronisation is provided
+ * by the i_flags_lock.
*/
if (!ip->i_update_core && (ip->i_itemp == NULL)) {
xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -3840,13 +3845,13 @@
} else {
xfs_mount_t *mp = ip->i_mount;
- /* Protect sync from us */
+ /* Protect sync and unpin from us */
XFS_MOUNT_ILOCK(mp);
- vn_bhv_remove(VN_BHV_HEAD(vp), XFS_ITOBHV(ip));
- list_add_tail(&ip->i_reclaim, &mp->m_del_inodes);
spin_lock(&ip->i_flags_lock);
- ip->i_flags |= XFS_IRECLAIMABLE;
+ __xfs_iflags_set(ip, XFS_IRECLAIMABLE);
+ vn_bhv_remove(VN_BHV_HEAD(vp), XFS_ITOBHV(ip));
spin_unlock(&ip->i_flags_lock);
+ list_add_tail(&ip->i_reclaim, &mp->m_del_inodes);
XFS_MOUNT_IUNLOCK(mp);
}
return 0;
@@ -3872,8 +3877,8 @@
*/
write_lock(&ih->ih_lock);
spin_lock(&ip->i_flags_lock);
- if ((ip->i_flags & XFS_IRECLAIM) ||
- (!(ip->i_flags & XFS_IRECLAIMABLE) && vp == NULL)) {
+ if (__xfs_iflags_test(ip, XFS_IRECLAIM) ||
+ (!__xfs_iflags_test(ip, XFS_IRECLAIMABLE) && vp == NULL)) {
spin_unlock(&ip->i_flags_lock);
write_unlock(&ih->ih_lock);
if (locked) {
@@ -3882,7 +3887,7 @@
}
return 1;
}
- ip->i_flags |= XFS_IRECLAIM;
+ __xfs_iflags_set(ip, XFS_IRECLAIM);
spin_unlock(&ip->i_flags_lock);
write_unlock(&ih->ih_lock);
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 68731e0..cff752f 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -2242,7 +2242,7 @@
#define CICR1_TBIT (1 << 31) /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
-#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */
+#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
#define CICR1_RGB_F (1 << 11) /* RGB format */
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
@@ -2268,7 +2268,7 @@
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
-#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */
+#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
@@ -2289,8 +2289,8 @@
#define CISR_EOL (1 << 8) /* End of line */
#define CISR_PAR_ERR (1 << 7) /* Parity error */
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_SOF (1 << 5) /* Start of frame */
-#define CISR_CDD (1 << 4) /* Camera interface disable done */
+#define CISR_CDD (1 << 5) /* Camera interface disable done */
+#define CISR_SOF (1 << 4) /* Start of frame */
#define CISR_EOF (1 << 3) /* End of frame */
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
index a50e500..56ed1f9 100644
--- a/include/asm-avr32/unistd.h
+++ b/include/asm-avr32/unistd.h
@@ -280,9 +280,10 @@
#define __NR_sync_file_range 262
#define __NR_tee 263
#define __NR_vmsplice 264
+#define __NR_epoll_pwait 265
#ifdef __KERNEL__
-#define NR_syscalls 265
+#define NR_syscalls 266
#define __ARCH_WANT_IPC_PARSE_VERSION
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
index 1d9efe5..e715c79 100644
--- a/include/asm-ia64/sn/addrs.h
+++ b/include/asm-ia64/sn/addrs.h
@@ -136,9 +136,13 @@
*/
#define TO_PHYS(x) (TO_PHYS_MASK & (x))
#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
+#ifdef CONFIG_SGI_SN
#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
#define TO_GET(x) (GET_BASE | TO_PHYS(x))
-
+#else
+#define TO_AMO(x) ({ BUG(); x; })
+#define TO_GET(x) ({ BUG(); x; })
+#endif
/*
* Covert from processor physical address to II/TIO physical address:
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 0ce2a80..35a05ca 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -74,4 +74,8 @@
unsigned long hwmask);
#endif /* CONFIG_MIPS_MT_SMTC */
+extern int allocate_irqno(void);
+extern void alloc_legacy_irqno(void);
+extern void free_irqno(unsigned int irq);
+
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index eac85ce..c6a0318 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -261,7 +261,7 @@
PPC_SYS_SPU(rtas)
OLDSYS(debug_setcontext)
SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
+COMPAT_SYS(migrate_pages)
COMPAT_SYS(mbind)
COMPAT_SYS(get_mempolicy)
COMPAT_SYS(set_mempolicy)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 464a48c..b5fe932 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -276,7 +276,7 @@
#define __NR_rtas 255
#define __NR_sys_debug_setcontext 256
/* Number 257 is reserved for vserver */
-/* 258 currently unused */
+#define __NR_migrate_pages 258
#define __NR_mbind 259
#define __NR_get_mempolicy 260
#define __NR_set_mempolicy 261
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index c7a495a..f7827fa 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -318,12 +318,15 @@
#define __NR_unshare 299
#define __NR_set_robust_list 300
#define __NR_get_robust_list 301
+#define __NR_migrate_pages 302
+
+#define NR_SYSCALLS 303
#ifdef __KERNEL__
-/* WARNING: You MAY NOT add syscall numbers larger than 301, since
+/* WARNING: You MAY NOT add syscall numbers larger than 302, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 301 entries (starting at zero). Therefore
- * find a free slot in the 0-301 range.
+ * sized to have 302 entries (starting at zero). Therefore
+ * find a free slot in the 0-302 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 124cf07..63669da 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -320,12 +320,16 @@
#define __NR_unshare 299
#define __NR_set_robust_list 300
#define __NR_get_robust_list 301
+#define __NR_migrate_pages 302
+
+#define NR_SYSCALLS 303
#ifdef __KERNEL__
-/* WARNING: You MAY NOT add syscall numbers larger than 301, since
+
+/* WARNING: You MAY NOT add syscall numbers larger than 302, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 301 entries (starting at zero). Therefore
- * find a free slot in the 0-301 range.
+ * sized to have 302 entries (starting at zero). Therefore
+ * find a free slot in the 0-302 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index 171ec2d..561ecbf 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -12,10 +12,6 @@
#define APIC_MISMATCH_DEBUG
-#define IO_APIC_BASE(idx) \
- ((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
- + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
-
/*
* The structure of the IO-APIC:
*/
@@ -119,36 +115,6 @@
/* non-0 if default (table-less) MP configuration */
extern int mpc_default_type;
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
- *IO_APIC_BASE(apic) = reg;
- return *(IO_APIC_BASE(apic)+4);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
- *IO_APIC_BASE(apic) = reg;
- *(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int value)
-{
- *(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
- (void) *(IO_APIC_BASE(apic)+4);
-}
-
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index f155319..80b17f4 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -230,5 +230,9 @@
extern int compat_printk(const char *fmt, ...);
extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
+asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
+ compat_ulong_t maxnode, const compat_ulong_t __user *old_nodes,
+ const compat_ulong_t __user *new_nodes);
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/htirq.h b/include/linux/htirq.h
index 1f15ce2..c96ea46 100644
--- a/include/linux/htirq.h
+++ b/include/linux/htirq.h
@@ -1,15 +1,23 @@
#ifndef LINUX_HTIRQ_H
#define LINUX_HTIRQ_H
+struct ht_irq_msg {
+ u32 address_lo; /* low 32 bits of the ht irq message */
+ u32 address_hi; /* high 32 bits of the it irq message */
+};
+
/* Helper functions.. */
-void write_ht_irq_low(unsigned int irq, u32 data);
-void write_ht_irq_high(unsigned int irq, u32 data);
-u32 read_ht_irq_low(unsigned int irq);
-u32 read_ht_irq_high(unsigned int irq);
+void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
+void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
void mask_ht_irq(unsigned int irq);
void unmask_ht_irq(unsigned int irq);
/* The arch hook for getting things started */
int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
+/* For drivers of buggy hardware */
+typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
+ struct ht_irq_msg *msg);
+int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update);
+
#endif /* LINUX_HTIRQ_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index 22f5e2a..4d04d8b 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -75,6 +75,8 @@
#define IPMI_INVALID_COMMAND_ERR 0xc1
#define IPMI_ERR_MSG_TRUNCATED 0xc6
#define IPMI_LOST_ARBITRATION_ERR 0x81
+#define IPMI_BUS_ERR 0x82
+#define IPMI_NAK_ON_WRITE_ERR 0x83
#define IPMI_ERR_UNSPECIFIED 0xff
#define IPMI_CHANNEL_PROTOCOL_IPMB 1
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
index 4f29c60..eb19b4e 100644
--- a/include/linux/ipx.h
+++ b/include/linux/ipx.h
@@ -7,8 +7,8 @@
struct sockaddr_ipx {
sa_family_t sipx_family;
- __u16 sipx_port;
- __u32 sipx_network;
+ __be16 sipx_port;
+ __be32 sipx_network;
unsigned char sipx_node[IPX_NODE_LEN];
__u8 sipx_type;
unsigned char sipx_zero; /* 16 byte fill */
@@ -23,13 +23,13 @@
#define IPX_CRTITF 1
struct ipx_route_definition {
- __u32 ipx_network;
- __u32 ipx_router_network;
+ __be32 ipx_network;
+ __be32 ipx_router_network;
unsigned char ipx_router_node[IPX_NODE_LEN];
};
struct ipx_interface_definition {
- __u32 ipx_network;
+ __be32 ipx_network;
unsigned char ipx_device[16];
unsigned char ipx_dlink_type;
#define IPX_FRAME_NONE 0
@@ -55,8 +55,8 @@
*/
struct ipx_route_def {
- __u32 ipx_network;
- __u32 ipx_router_network;
+ __be32 ipx_network;
+ __be32 ipx_router_network;
#define IPX_ROUTE_NO_ROUTER 0
unsigned char ipx_router_node[IPX_NODE_LEN];
unsigned char ipx_device[16];
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 80f39ca..24b6111 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -171,6 +171,8 @@
extern int printk_ratelimit(void);
extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
static inline void console_silent(void)
{
diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h
index eb23114..edb54c3 100644
--- a/include/linux/nfsd/nfsd.h
+++ b/include/linux/nfsd/nfsd.h
@@ -89,7 +89,7 @@
__be32 nfsd_create_v3(struct svc_rqst *, struct svc_fh *,
char *name, int len, struct iattr *attrs,
struct svc_fh *res, int createmode,
- u32 *verifier, int *truncp);
+ u32 *verifier, int *truncp, int *created);
__be32 nfsd_commit(struct svc_rqst *, struct svc_fh *,
loff_t, unsigned long);
#endif /* CONFIG_NFSD_V3 */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index f3a168f..fa4e1d7 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1213,6 +1213,7 @@
#define PCI_DEVICE_ID_NVIDIA_NVENET_21 0x0451
#define PCI_DEVICE_ID_NVIDIA_NVENET_22 0x0452
#define PCI_DEVICE_ID_NVIDIA_NVENET_23 0x0453
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_TT128 0x9128
diff --git a/include/linux/personality.h b/include/linux/personality.h
index bf4cf20..012cd55 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -114,7 +114,7 @@
* Change personality of the currently running process.
*/
#define set_personality(pers) \
- ((current->personality == pers) ? 0 : __set_personality(pers))
+ ((current->personality == (pers)) ? 0 : __set_personality(pers))
#endif /* __KERNEL__ */
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 6b27e07..070394e 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -116,7 +116,9 @@
#define PM_DISK_PLATFORM ((__force suspend_disk_method_t) 2)
#define PM_DISK_SHUTDOWN ((__force suspend_disk_method_t) 3)
#define PM_DISK_REBOOT ((__force suspend_disk_method_t) 4)
-#define PM_DISK_MAX ((__force suspend_disk_method_t) 5)
+#define PM_DISK_TEST ((__force suspend_disk_method_t) 5)
+#define PM_DISK_TESTPROC ((__force suspend_disk_method_t) 6)
+#define PM_DISK_MAX ((__force suspend_disk_method_t) 7)
struct pm_ops {
suspend_disk_method_t pm_disk_mode;
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 1b24bd4..d98562f 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -6,10 +6,17 @@
****************************************************************
****************************************************************
**
+ ** WARNING:
** The values in this file are exported to user space via
- ** the sysctl() binary interface. However this interface
- ** is unstable and deprecated and will be removed in the future.
- ** For a stable interface use /proc/sys.
+ ** the sysctl() binary interface. Do *NOT* change the
+ ** numbering of any existing values here, and do not change
+ ** any numbers within any one set of values. If you have to
+ ** have to redefine an existing interface, use a new number for it.
+ ** The kernel will then return -ENOTDIR to any application using
+ ** the old binary interface.
+ **
+ ** For new interfaces unless you really need a binary number
+ ** please use CTL_UNNUMBERED.
**
****************************************************************
****************************************************************
@@ -48,6 +55,7 @@
#ifdef __KERNEL__
#define CTL_ANY -1 /* Matches any name */
#define CTL_NONE 0
+#define CTL_UNNUMBERED CTL_NONE /* sysctl without a binary number */
#endif
enum
@@ -961,8 +969,8 @@
/*
* Register a set of sysctl names by calling register_sysctl_table
* with an initialised array of ctl_table's. An entry with zero
- * ctl_name terminates the table. table->de will be set up by the
- * registration and need not be initialised in advance.
+ * ctl_name and NULL procname terminates the table. table->de will be
+ * set up by the registration and need not be initialised in advance.
*
* sysctl names can be mirrored automatically under /proc/sys. The
* procname supplied controls /proc naming.
@@ -973,7 +981,10 @@
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories. A
* null procname disables /proc mirroring at this node.
- *
+ *
+ * sysctl entries with a zero ctl_name will not be available through
+ * the binary sysctl interface.
+ *
* sysctl(2) can automatically manage read and write requests through
* the sysctl table. The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h
index 61eef50..28967ed 100644
--- a/include/linux/ufs_fs.h
+++ b/include/linux/ufs_fs.h
@@ -908,7 +908,7 @@
__fs64 fs_csaddr; /* blk addr of cyl grp summary area */
__fs64 fs_pendingblocks;/* blocks in process of being freed */
__fs32 fs_pendinginodes;/*inodes in process of being freed */
- } fs_u2;
+ } __attribute__ ((packed)) fs_u2;
} fs_un1;
union {
struct {
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index dc9a29d..924e502 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -23,13 +23,14 @@
#endif
struct vm_struct {
+ /* keep next,addr,size together to speedup lookups */
+ struct vm_struct *next;
void *addr;
unsigned long size;
unsigned long flags;
struct page **pages;
unsigned int nr_pages;
unsigned long phys_addr;
- struct vm_struct *next;
};
/*
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index d599c6b..7849844 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -48,7 +48,7 @@
#define IP6_ECN_flow_xmit(sk, label) do { \
if (INET_ECN_is_capable(inet_sk(sk)->tos)) \
- (label) |= __constant_htons(INET_ECN_ECT_0 << 4); \
+ (label) |= htonl(INET_ECN_ECT_0 << 20); \
} while (0)
static inline int IP_ECN_set_ce(struct iphdr *iph)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 49c717e..903108e 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -7,6 +7,7 @@
#define _IP_VS_H
#include <asm/types.h> /* For __uXX types */
+#include <linux/types.h> /* For __beXX types in userland */
#define IP_VS_VERSION_CODE 0x010201
#define NVERSION(version) \
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 5c0cf33..c6b2ee6 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -15,9 +15,9 @@
#include <linux/list.h>
struct ipx_address {
- __u32 net;
+ __be32 net;
__u8 node[IPX_NODE_LEN];
- __u16 sock;
+ __be16 sock;
};
#define ipx_broadcast_node "\377\377\377\377\377\377"
@@ -26,9 +26,9 @@
#define IPX_MAX_PPROP_HOPS 8
struct ipxhdr {
- __u16 ipx_checksum __attribute__ ((packed));
-#define IPX_NO_CHECKSUM 0xFFFF
- __u16 ipx_pktsize __attribute__ ((packed));
+ __be16 ipx_checksum __attribute__ ((packed));
+#define IPX_NO_CHECKSUM __constant_htons(0xFFFF)
+ __be16 ipx_pktsize __attribute__ ((packed));
__u8 ipx_tctrl;
__u8 ipx_type;
#define IPX_TYPE_UNKNOWN 0x00
@@ -48,14 +48,14 @@
struct ipx_interface {
/* IPX address */
- __u32 if_netnum;
+ __be32 if_netnum;
unsigned char if_node[IPX_NODE_LEN];
atomic_t refcnt;
/* physical device info */
struct net_device *if_dev;
struct datalink_proto *if_dlink;
- unsigned short if_dlink_type;
+ __be16 if_dlink_type;
/* socket support */
unsigned short if_sknum;
@@ -71,7 +71,7 @@
};
struct ipx_route {
- __u32 ir_net;
+ __be32 ir_net;
struct ipx_interface *ir_intrfc;
unsigned char ir_routed;
unsigned char ir_router_node[IPX_NODE_LEN];
@@ -82,10 +82,10 @@
#ifdef __KERNEL__
struct ipx_cb {
u8 ipx_tctrl;
- u32 ipx_dest_net;
- u32 ipx_source_net;
+ __be32 ipx_dest_net;
+ __be32 ipx_source_net;
struct {
- u32 netnum;
+ __be32 netnum;
int index;
} last_hop;
};
@@ -97,7 +97,7 @@
struct sock sk;
struct ipx_address dest_addr;
struct ipx_interface *intrfc;
- unsigned short port;
+ __be16 port;
#ifdef CONFIG_IPX_INTERN
unsigned char node[IPX_NODE_LEN];
#endif
@@ -132,7 +132,7 @@
extern int ipx_proc_init(void);
extern void ipx_proc_exit(void);
-extern const char *ipx_frame_name(unsigned short);
+extern const char *ipx_frame_name(__be16);
extern const char *ipx_device_name(struct ipx_interface *intrfc);
static __inline__ void ipxitf_hold(struct ipx_interface *intrfc)
diff --git a/init/Kconfig b/init/Kconfig
index c8b2624..176f7e5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -304,20 +304,19 @@
config SYSCTL_SYSCALL
bool "Sysctl syscall support" if EMBEDDED
- default n
+ default y
select SYSCTL
---help---
- Enable the deprecated sysctl system call. sys_sysctl uses
- binary paths that have been found to be a major pain to maintain
- and use. The interface in /proc/sys is now the primary and what
- everyone uses.
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. The interface in /proc/sys
+ using paths with ascii names is now the primary path to this
+ information.
- Nothing has been using the binary sysctl interface for some
- time now so nothing should break if you disable sysctl syscall
- support, and your kernel will get marginally smaller.
+ Almost nothing using the binary sysctl interface so if you are
+ trying to save some space it is probably safe to disable this,
+ making your kernel marginally smaller.
- Unless you have an application that uses the sys_sysctl interface
- you should probably say N here.
+ If unsure say Y here.
config KALLSYMS
bool "Load all symbols for debugging/kksymoops" if EMBEDDED
diff --git a/ipc/msg.c b/ipc/msg.c
index 5b213d9..1266b1d 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -52,7 +52,7 @@
long r_msgtype;
long r_maxsize;
- volatile struct msg_msg *r_msg;
+ struct msg_msg *volatile r_msg;
};
/* one msg_sender for each sleeping sender */
@@ -124,6 +124,7 @@
}
mutex_unlock(&msg_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_MSG_IDS]);
kfree(ns->ids[IPC_MSG_IDS]);
ns->ids[IPC_MSG_IDS] = NULL;
}
diff --git a/ipc/sem.c b/ipc/sem.c
index 0dafcc4..21b3289 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -161,6 +161,7 @@
}
mutex_unlock(&sem_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_SEM_IDS]);
kfree(ns->ids[IPC_SEM_IDS]);
ns->ids[IPC_SEM_IDS] = NULL;
}
diff --git a/ipc/shm.c b/ipc/shm.c
index bfbd317..d1198dd 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -116,6 +116,7 @@
}
mutex_unlock(&shm_ids(ns).mutex);
+ ipc_fini_ids(ns->ids[IPC_SHM_IDS]);
kfree(ns->ids[IPC_SHM_IDS]);
ns->ids[IPC_SHM_IDS] = NULL;
}
diff --git a/ipc/util.c b/ipc/util.c
index 42479e4..cd8bb14 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -301,7 +301,7 @@
*/
rcu_assign_pointer(ids->entries, new);
- ipc_rcu_putref(old);
+ __ipc_fini_ids(ids, old);
return newsize;
}
diff --git a/ipc/util.h b/ipc/util.h
index c8fd6b9..e3aa2c5 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -83,6 +83,18 @@
void ipc_rcu_getref(void *ptr);
void ipc_rcu_putref(void *ptr);
+static inline void __ipc_fini_ids(struct ipc_ids *ids,
+ struct ipc_id_ary *entries)
+{
+ if (entries != &ids->nullentry)
+ ipc_rcu_putref(entries);
+}
+
+static inline void ipc_fini_ids(struct ipc_ids *ids)
+{
+ __ipc_fini_ids(ids, ids->entries);
+}
+
struct kern_ipc_perm* ipc_get(struct ipc_ids* ids, int id);
struct kern_ipc_perm* ipc_lock(struct ipc_ids* ids, int id);
void ipc_lock_by_ptr(struct kern_ipc_perm *ipcp);
diff --git a/kernel/compat.c b/kernel/compat.c
index d4898aa..6952dd0 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -982,4 +982,37 @@
}
return sys_move_pages(pid, nr_pages, pages, nodes, status, flags);
}
+
+asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
+ compat_ulong_t maxnode,
+ const compat_ulong_t __user *old_nodes,
+ const compat_ulong_t __user *new_nodes)
+{
+ unsigned long __user *old = NULL;
+ unsigned long __user *new = NULL;
+ nodemask_t tmp_mask;
+ unsigned long nr_bits;
+ unsigned long size;
+
+ nr_bits = min_t(unsigned long, maxnode - 1, MAX_NUMNODES);
+ size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
+ if (old_nodes) {
+ if (compat_get_bitmap(nodes_addr(tmp_mask), old_nodes, nr_bits))
+ return -EFAULT;
+ old = compat_alloc_user_space(new_nodes ? size * 2 : size);
+ if (new_nodes)
+ new = old + size / sizeof(unsigned long);
+ if (copy_to_user(old, nodes_addr(tmp_mask), size))
+ return -EFAULT;
+ }
+ if (new_nodes) {
+ if (compat_get_bitmap(nodes_addr(tmp_mask), new_nodes, nr_bits))
+ return -EFAULT;
+ if (new == NULL)
+ new = compat_alloc_user_space(size);
+ if (copy_to_user(new, nodes_addr(tmp_mask), size))
+ return -EFAULT;
+ }
+ return sys_migrate_pages(pid, nr_bits + 1, old, new);
+}
#endif
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 663c920..272254f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -58,8 +58,8 @@
recursive_depth--;
return;
}
- mutex_unlock(&cpu_bitmask_lock);
recursive = NULL;
+ mutex_unlock(&cpu_bitmask_lock);
}
EXPORT_SYMBOL_GPL(unlock_cpu_hotplug);
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 36752f1..66a0ea4 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -66,6 +66,7 @@
{
struct timespec ts;
s64 ns;
+ unsigned long flags;
do_posix_clock_monotonic_gettime(end);
ts = timespec_sub(*end, *start);
@@ -73,10 +74,10 @@
if (ns < 0)
return;
- spin_lock(¤t->delays->lock);
+ spin_lock_irqsave(¤t->delays->lock, flags);
*total += ns;
(*count)++;
- spin_unlock(¤t->delays->lock);
+ spin_unlock_irqrestore(¤t->delays->lock, flags);
}
void __delayacct_blkio_start(void)
@@ -104,6 +105,7 @@
s64 tmp;
struct timespec ts;
unsigned long t1,t2,t3;
+ unsigned long flags;
/* Though tsk->delays accessed later, early exit avoids
* unnecessary returning of other data
@@ -136,14 +138,14 @@
/* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
- spin_lock(&tsk->delays->lock);
+ spin_lock_irqsave(&tsk->delays->lock, flags);
tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
d->blkio_count += tsk->delays->blkio_count;
d->swapin_count += tsk->delays->swapin_count;
- spin_unlock(&tsk->delays->lock);
+ spin_unlock_irqrestore(&tsk->delays->lock, flags);
done:
return 0;
@@ -152,11 +154,12 @@
__u64 __delayacct_blkio_ticks(struct task_struct *tsk)
{
__u64 ret;
+ unsigned long flags;
- spin_lock(&tsk->delays->lock);
+ spin_lock_irqsave(&tsk->delays->lock, flags);
ret = nsec_to_clock_t(tsk->delays->blkio_delay +
tsk->delays->swapin_delay);
- spin_unlock(&tsk->delays->lock);
+ spin_unlock_irqrestore(&tsk->delays->lock, flags);
return ret;
}
diff --git a/kernel/fork.c b/kernel/fork.c
index 3da978e..4b4eab2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -687,6 +687,7 @@
* the latest pointer.
*/
spin_lock(&oldf->file_lock);
+ open_files = count_open_files(old_fdt);
old_fdt = files_fdtable(oldf);
}
diff --git a/kernel/futex.c b/kernel/futex.c
index b364e00..93ef30b 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1507,6 +1507,13 @@
struct futex_q *q;
struct file *filp;
int ret, err;
+ static unsigned long printk_interval;
+
+ if (printk_timed_ratelimit(&printk_interval, 60 * 60 * 1000)) {
+ printk(KERN_WARNING "Process `%s' used FUTEX_FD, which "
+ "will be removed from the kernel in June 2007\n",
+ current->comm);
+ }
ret = -EINVAL;
if (!valid_signal(signal))
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 543ea2e..9c7e2e4 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -147,7 +147,11 @@
if (unlikely(irqfixup)) {
/* Don't punish working computers */
if ((irqfixup == 2 && irq == 0) || action_ret == IRQ_NONE) {
- int ok = misrouted_irq(irq);
+ int ok;
+
+ spin_unlock(&desc->lock);
+ ok = misrouted_irq(irq);
+ spin_lock(&desc->lock);
if (action_ret == IRQ_NONE)
desc->irqs_unhandled -= ok;
}
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index d3a158a..b1fb786 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -71,7 +71,7 @@
static int prepare_processes(void)
{
- int error;
+ int error = 0;
pm_prepare_console();
@@ -84,6 +84,12 @@
goto thaw;
}
+ if (pm_disk_mode == PM_DISK_TESTPROC) {
+ printk("swsusp debug: Waiting for 5 seconds.\n");
+ mdelay(5000);
+ goto thaw;
+ }
+
/* Free memory before shutting down devices. */
if (!(error = swsusp_shrink_memory()))
return 0;
@@ -120,13 +126,21 @@
if (error)
return error;
+ if (pm_disk_mode == PM_DISK_TESTPROC)
+ goto Thaw;
+
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error) {
resume_console();
printk("Some devices failed to suspend\n");
- unprepare_processes();
- return error;
+ goto Thaw;
+ }
+
+ if (pm_disk_mode == PM_DISK_TEST) {
+ printk("swsusp debug: Waiting for 5 seconds.\n");
+ mdelay(5000);
+ goto Done;
}
pr_debug("PM: snapshotting memory.\n");
@@ -143,16 +157,17 @@
power_down(pm_disk_mode);
else {
swsusp_free();
- unprepare_processes();
- return error;
+ goto Thaw;
}
- } else
+ } else {
pr_debug("PM: Image restored successfully.\n");
+ }
swsusp_free();
Done:
device_resume();
resume_console();
+ Thaw:
unprepare_processes();
return error;
}
@@ -249,6 +264,8 @@
[PM_DISK_PLATFORM] = "platform",
[PM_DISK_SHUTDOWN] = "shutdown",
[PM_DISK_REBOOT] = "reboot",
+ [PM_DISK_TEST] = "test",
+ [PM_DISK_TESTPROC] = "testproc",
};
/**
@@ -303,17 +320,19 @@
}
}
if (mode) {
- if (mode == PM_DISK_SHUTDOWN || mode == PM_DISK_REBOOT)
+ if (mode == PM_DISK_SHUTDOWN || mode == PM_DISK_REBOOT ||
+ mode == PM_DISK_TEST || mode == PM_DISK_TESTPROC) {
pm_disk_mode = mode;
- else {
+ } else {
if (pm_ops && pm_ops->enter &&
(mode == pm_ops->pm_disk_mode))
pm_disk_mode = mode;
else
error = -EINVAL;
}
- } else
+ } else {
error = -EINVAL;
+ }
pr_debug("PM: suspend-to-disk mode set to '%s'\n",
pm_disk_modes[mode]);
diff --git a/kernel/printk.c b/kernel/printk.c
index f7d427e..6642655 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -31,6 +31,7 @@
#include <linux/security.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
@@ -1101,3 +1102,23 @@
printk_ratelimit_burst);
}
EXPORT_SYMBOL(printk_ratelimit);
+
+/**
+ * printk_timed_ratelimit - caller-controlled printk ratelimiting
+ * @caller_jiffies: pointer to caller's state
+ * @interval_msecs: minimum interval between prints
+ *
+ * printk_timed_ratelimit() returns true if more than @interval_msecs
+ * milliseconds have elapsed since the last time printk_timed_ratelimit()
+ * returned true.
+ */
+bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msecs)
+{
+ if (*caller_jiffies == 0 || time_after(jiffies, *caller_jiffies)) {
+ *caller_jiffies = jiffies + msecs_to_jiffies(interval_msecs);
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(printk_timed_ratelimit);
diff --git a/kernel/signal.c b/kernel/signal.c
index 7ed8d53..df18c16 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -267,18 +267,25 @@
int override_rlimit)
{
struct sigqueue *q = NULL;
+ struct user_struct *user;
- atomic_inc(&t->user->sigpending);
+ /*
+ * In order to avoid problems with "switch_user()", we want to make
+ * sure that the compiler doesn't re-load "t->user"
+ */
+ user = t->user;
+ barrier();
+ atomic_inc(&user->sigpending);
if (override_rlimit ||
- atomic_read(&t->user->sigpending) <=
+ atomic_read(&user->sigpending) <=
t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
q = kmem_cache_alloc(sigqueue_cachep, flags);
if (unlikely(q == NULL)) {
- atomic_dec(&t->user->sigpending);
+ atomic_dec(&user->sigpending);
} else {
INIT_LIST_HEAD(&q->list);
q->flags = 0;
- q->user = get_uid(t->user);
+ q->user = get_uid(user);
}
return(q);
}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 0e53314..d7306d0 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -135,6 +135,7 @@
cond_syscall(sys_mremap);
cond_syscall(sys_remap_file_pages);
cond_syscall(compat_sys_move_pages);
+cond_syscall(compat_sys_migrate_pages);
/* block-layer dependent */
cond_syscall(sys_bdflush);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8bff2c1..09e569f 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1315,7 +1315,9 @@
return -ENOTDIR;
if (get_user(n, name))
return -EFAULT;
- for ( ; table->ctl_name; table++) {
+ for ( ; table->ctl_name || table->procname; table++) {
+ if (!table->ctl_name)
+ continue;
if (n == table->ctl_name || table->ctl_name == CTL_ANY) {
int error;
if (table->child) {
@@ -1532,7 +1534,7 @@
int len;
mode_t mode;
- for (; table->ctl_name; table++) {
+ for (; table->ctl_name || table->procname; table++) {
/* Can't do anything without a proc name. */
if (!table->procname)
continue;
@@ -1579,7 +1581,7 @@
static void unregister_proc_table(ctl_table * table, struct proc_dir_entry *root)
{
struct proc_dir_entry *de;
- for (; table->ctl_name; table++) {
+ for (; table->ctl_name || table->procname; table++) {
if (!(de = table->de))
continue;
if (de->mode & S_IFDIR) {
@@ -2680,13 +2682,33 @@
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
static int msg_count;
+ struct __sysctl_args tmp;
+ int name[CTL_MAXNAME];
+ int i;
+
+ /* Read in the sysctl name for better debug message logging */
+ if (copy_from_user(&tmp, args, sizeof(tmp)))
+ return -EFAULT;
+ if (tmp.nlen <= 0 || tmp.nlen >= CTL_MAXNAME)
+ return -ENOTDIR;
+ for (i = 0; i < tmp.nlen; i++)
+ if (get_user(name[i], tmp.name + i))
+ return -EFAULT;
+
+ /* Ignore accesses to kernel.version */
+ if ((tmp.nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
+ goto out;
if (msg_count < 5) {
msg_count++;
printk(KERN_INFO
"warning: process `%s' used the removed sysctl "
- "system call\n", current->comm);
+ "system call with ", current->comm);
+ for (i = 0; i < tmp.nlen; i++)
+ printk("%d.", name[i]);
+ printk("\n");
}
+out:
return -ENOSYS;
}
diff --git a/kernel/user.c b/kernel/user.c
index 6408c04..220e586 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -187,6 +187,17 @@
atomic_dec(&old_user->processes);
switch_uid_keyring(new_user);
current->user = new_user;
+
+ /*
+ * We need to synchronize with __sigqueue_alloc()
+ * doing a get_uid(p->user).. If that saw the old
+ * user value, we need to wait until it has exited
+ * its critical region before we can free the old
+ * structure.
+ */
+ smp_mb();
+ spin_unlock_wait(¤t->sighand->siglock);
+
free_uid(old_user);
suid_keys(current);
}
diff --git a/mm/migrate.c b/mm/migrate.c
index ba2453f..b4979d4 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -952,7 +952,8 @@
goto out;
pm[i].node = node;
- }
+ } else
+ pm[i].node = 0; /* anything to not match MAX_NUMNODES */
}
/* End marker */
pm[nr_pages].node = MAX_NUMNODES;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b55bb35..bf2f6cf 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -853,7 +853,7 @@
pcp = &zone_pcp(zone, cpu)->pcp[cold];
local_irq_save(flags);
if (!pcp->count) {
- pcp->count += rmqueue_bulk(zone, 0,
+ pcp->count = rmqueue_bulk(zone, 0,
pcp->batch, &pcp->list);
if (unlikely(!pcp->count))
goto failed;
diff --git a/mm/readahead.c b/mm/readahead.c
index 1ba736a..23cb61a 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -173,6 +173,8 @@
if (mapping->a_ops->readpages) {
ret = mapping->a_ops->readpages(filp, mapping, pages, nr_pages);
+ /* Clean up the remaining pages */
+ put_pages_list(pages);
goto out;
}
diff --git a/mm/slab.c b/mm/slab.c
index 84c631f..3c4a7e3 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -883,7 +883,7 @@
if (node == MAX_NUMNODES)
node = first_node(node_online_map);
- __get_cpu_var(reap_node) = node;
+ per_cpu(reap_node, cpu) = node;
}
static void next_reap_node(void)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 46606c1..7dc6aa7 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -186,10 +186,8 @@
if (unlikely(!area))
return NULL;
- if (unlikely(!size)) {
- kfree (area);
+ if (unlikely(!size))
return NULL;
- }
/*
* We always allocate a guard page.
@@ -532,11 +530,12 @@
void *ret;
ret = __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
- write_lock(&vmlist_lock);
- area = __find_vm_area(ret);
- area->flags |= VM_USERMAP;
- write_unlock(&vmlist_lock);
-
+ if (ret) {
+ write_lock(&vmlist_lock);
+ area = __find_vm_area(ret);
+ area->flags |= VM_USERMAP;
+ write_unlock(&vmlist_lock);
+ }
return ret;
}
EXPORT_SYMBOL(vmalloc_user);
@@ -605,11 +604,12 @@
void *ret;
ret = __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
- write_lock(&vmlist_lock);
- area = __find_vm_area(ret);
- area->flags |= VM_USERMAP;
- write_unlock(&vmlist_lock);
-
+ if (ret) {
+ write_lock(&vmlist_lock);
+ area = __find_vm_area(ret);
+ area->flags |= VM_USERMAP;
+ write_unlock(&vmlist_lock);
+ }
return ret;
}
EXPORT_SYMBOL(vmalloc_32_user);
diff --git a/net/Kconfig b/net/Kconfig
index a81aca4..67e39ad 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -63,6 +63,7 @@
if INET
source "net/ipv4/Kconfig"
source "net/ipv6/Kconfig"
+source "net/netlabel/Kconfig"
endif # if INET
@@ -249,8 +250,6 @@
config WIRELESS_EXT
bool
-source "net/netlabel/Kconfig"
-
config FIB_RULES
bool
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 9308af0..6589adb 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -340,6 +340,12 @@
udph->dest = htons(np->remote_port);
udph->len = htons(udp_len);
udph->check = 0;
+ udph->check = csum_tcpudp_magic(htonl(np->local_ip),
+ htonl(np->remote_ip),
+ udp_len, IPPROTO_UDP,
+ csum_partial((unsigned char *)udph, udp_len, 0));
+ if (udph->check == 0)
+ udph->check = -1;
skb->nh.iph = iph = (struct iphdr *)skb_push(skb, sizeof(*iph));
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index dd023fd..733d86d 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2304,6 +2304,12 @@
*mpls |= MPLS_STACK_BOTTOM;
}
+static inline __be16 build_tci(unsigned int id, unsigned int cfi,
+ unsigned int prio)
+{
+ return htons(id | (cfi << 12) | (prio << 13));
+}
+
static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
struct pktgen_dev *pkt_dev)
{
@@ -2353,16 +2359,16 @@
if (pkt_dev->vlan_id != 0xffff) {
if(pkt_dev->svlan_id != 0xffff) {
svlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *svlan_tci = htons(pkt_dev->svlan_id);
- *svlan_tci |= pkt_dev->svlan_p << 5;
- *svlan_tci |= pkt_dev->svlan_cfi << 4;
+ *svlan_tci = build_tci(pkt_dev->svlan_id,
+ pkt_dev->svlan_cfi,
+ pkt_dev->svlan_p);
svlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*svlan_encapsulated_proto = __constant_htons(ETH_P_8021Q);
}
vlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *vlan_tci = htons(pkt_dev->vlan_id);
- *vlan_tci |= pkt_dev->vlan_p << 5;
- *vlan_tci |= pkt_dev->vlan_cfi << 4;
+ *vlan_tci = build_tci(pkt_dev->vlan_id,
+ pkt_dev->vlan_cfi,
+ pkt_dev->vlan_p);
vlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*vlan_encapsulated_proto = __constant_htons(ETH_P_IP);
}
@@ -2689,16 +2695,16 @@
if (pkt_dev->vlan_id != 0xffff) {
if(pkt_dev->svlan_id != 0xffff) {
svlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *svlan_tci = htons(pkt_dev->svlan_id);
- *svlan_tci |= pkt_dev->svlan_p << 5;
- *svlan_tci |= pkt_dev->svlan_cfi << 4;
+ *svlan_tci = build_tci(pkt_dev->svlan_id,
+ pkt_dev->svlan_cfi,
+ pkt_dev->svlan_p);
svlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*svlan_encapsulated_proto = __constant_htons(ETH_P_8021Q);
}
vlan_tci = (__be16 *)skb_put(skb, sizeof(__be16));
- *vlan_tci = htons(pkt_dev->vlan_id);
- *vlan_tci |= pkt_dev->vlan_p << 5;
- *vlan_tci |= pkt_dev->vlan_cfi << 4;
+ *vlan_tci = build_tci(pkt_dev->vlan_id,
+ pkt_dev->vlan_cfi,
+ pkt_dev->vlan_p);
vlan_encapsulated_proto = (__be16 *)skb_put(skb, sizeof(__be16));
*vlan_encapsulated_proto = __constant_htons(ETH_P_IPV6);
}
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index f735455..b8b1063 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -639,6 +639,7 @@
n->csum = skb->csum;
n->ip_summed = skb->ip_summed;
+ n->truesize += skb->data_len;
n->data_len = skb->data_len;
n->len = skb->len;
diff --git a/net/core/sock.c b/net/core/sock.c
index d472db4..ee6cd25 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1160,7 +1160,7 @@
goto failure;
if (atomic_read(&sk->sk_wmem_alloc) < sk->sk_sndbuf) {
- skb = alloc_skb(header_len, sk->sk_allocation);
+ skb = alloc_skb(header_len, gfp_mask);
if (skb) {
int npages;
int i;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 3456cd3..21f20f2 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -166,7 +166,7 @@
if (scp->addr.sdn_flags & SDF_WILD)
return hlist_empty(&dn_wild_sk) ? &dn_wild_sk : NULL;
- return &dn_sk_hash[scp->addrloc & DN_SK_HASH_MASK];
+ return &dn_sk_hash[dn_ntohs(scp->addrloc) & DN_SK_HASH_MASK];
}
/*
@@ -180,7 +180,7 @@
if (port == 0)
return -1;
- sk_for_each(sk, node, &dn_sk_hash[port & DN_SK_HASH_MASK]) {
+ sk_for_each(sk, node, &dn_sk_hash[dn_ntohs(port) & DN_SK_HASH_MASK]) {
struct dn_scp *scp = DN_SK(sk);
if (scp->addrloc == port)
return -1;
@@ -194,12 +194,12 @@
static unsigned short port = 0x2000;
unsigned short i_port = port;
- while(check_port(++port) != 0) {
+ while(check_port(dn_htons(++port)) != 0) {
if (port == i_port)
return 0;
}
- scp->addrloc = port;
+ scp->addrloc = dn_htons(port);
return 1;
}
@@ -418,7 +418,7 @@
struct dn_scp *scp;
read_lock(&dn_hash_lock);
- sk_for_each(sk, node, &dn_sk_hash[cb->dst_port & DN_SK_HASH_MASK]) {
+ sk_for_each(sk, node, &dn_sk_hash[dn_ntohs(cb->dst_port) & DN_SK_HASH_MASK]) {
scp = DN_SK(sk);
if (cb->src != dn_saddr2dn(&scp->peer))
continue;
@@ -1016,13 +1016,14 @@
static void dn_user_copy(struct sk_buff *skb, struct optdata_dn *opt)
{
- unsigned char *ptr = skb->data;
-
- opt->opt_optl = *ptr++;
- opt->opt_status = 0;
- memcpy(opt->opt_data, ptr, opt->opt_optl);
- skb_pull(skb, dn_ntohs(opt->opt_optl) + 1);
+ unsigned char *ptr = skb->data;
+ u16 len = *ptr++; /* yes, it's 8bit on the wire */
+ BUG_ON(len > 16); /* we've checked the contents earlier */
+ opt->opt_optl = dn_htons(len);
+ opt->opt_status = 0;
+ memcpy(opt->opt_data, ptr, len);
+ skb_pull(skb, len + 1);
}
static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo)
diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c
index 72ecc6e..7683d4f 100644
--- a/net/decnet/dn_nsp_in.c
+++ b/net/decnet/dn_nsp_in.c
@@ -360,9 +360,9 @@
scp->max_window = decnet_no_fc_max_cwnd;
if (skb->len > 0) {
- unsigned char dlen = *skb->data;
+ u16 dlen = *skb->data;
if ((dlen <= 16) && (dlen <= skb->len)) {
- scp->conndata_in.opt_optl = dn_htons((__u16)dlen);
+ scp->conndata_in.opt_optl = dn_htons(dlen);
memcpy(scp->conndata_in.opt_data, skb->data + 1, dlen);
}
}
@@ -404,9 +404,9 @@
memset(scp->discdata_in.opt_data, 0, 16);
if (skb->len > 0) {
- unsigned char dlen = *skb->data;
+ u16 dlen = *skb->data;
if ((dlen <= 16) && (dlen <= skb->len)) {
- scp->discdata_in.opt_optl = dn_htons((__u16)dlen);
+ scp->discdata_in.opt_optl = dn_htons(dlen);
memcpy(scp->discdata_in.opt_data, skb->data + 1, dlen);
}
}
diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c
index c2e21cd..b342e4e 100644
--- a/net/decnet/dn_nsp_out.c
+++ b/net/decnet/dn_nsp_out.c
@@ -526,7 +526,7 @@
struct nsp_conn_init_msg *msg;
__u8 len = (__u8)dn_ntohs(scp->conndata_out.opt_optl);
- if ((skb = dn_alloc_skb(sk, 50 + dn_ntohs(scp->conndata_out.opt_optl), gfp)) == NULL)
+ if ((skb = dn_alloc_skb(sk, 50 + len, gfp)) == NULL)
return;
msg = (struct nsp_conn_init_msg *)skb_put(skb, sizeof(*msg));
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index 3e0c882..590e0a7 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -124,8 +124,8 @@
static int dn_fib_rule_match(struct fib_rule *rule, struct flowi *fl, int flags)
{
struct dn_fib_rule *r = (struct dn_fib_rule *)rule;
- u16 daddr = fl->fld_dst;
- u16 saddr = fl->fld_src;
+ __le16 daddr = fl->fld_dst;
+ __le16 saddr = fl->fld_src;
if (((saddr ^ r->src) & r->srcmask) ||
((daddr ^ r->dst) & r->dstmask))
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 7707041..2759312 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -1078,12 +1078,12 @@
while (length >= sizeof(*info_element)) {
if (sizeof(*info_element) + info_element->len > length) {
- IEEE80211_ERROR("Info elem: parse failed: "
- "info_element->len + 2 > left : "
- "info_element->len+2=%zd left=%d, id=%d.\n",
- info_element->len +
- sizeof(*info_element),
- length, info_element->id);
+ IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+ "info_element->len + 2 > left : "
+ "info_element->len+2=%zd left=%d, id=%d.\n",
+ info_element->len +
+ sizeof(*info_element),
+ length, info_element->id);
/* We stop processing but don't return an error here
* because some misbehaviour APs break this rule. ie.
* Orinoco AP1000. */
diff --git a/net/ipv4/ipvs/ip_vs_ftp.c b/net/ipv4/ipvs/ip_vs_ftp.c
index 6d398f1..687c1de 100644
--- a/net/ipv4/ipvs/ip_vs_ftp.c
+++ b/net/ipv4/ipvs/ip_vs_ftp.c
@@ -200,7 +200,7 @@
from = n_cp->vaddr;
port = n_cp->vport;
sprintf(buf,"%d,%d,%d,%d,%d,%d", NIPQUAD(from),
- ntohs(port)&255, (ntohs(port)>>8)&255);
+ (ntohs(port)>>8)&255, ntohs(port)&255);
buf_len = strlen(buf);
/*
diff --git a/net/ipv4/ipvs/ip_vs_proto_tcp.c b/net/ipv4/ipvs/ip_vs_proto_tcp.c
index bfe779e..6ff05c3 100644
--- a/net/ipv4/ipvs/ip_vs_proto_tcp.c
+++ b/net/ipv4/ipvs/ip_vs_proto_tcp.c
@@ -117,7 +117,7 @@
{
tcph->check =
ip_vs_check_diff(~oldip, newip,
- ip_vs_check_diff(oldport ^ htonl(0xFFFF),
+ ip_vs_check_diff(oldport ^ htons(0xFFFF),
newport, tcph->check));
}
diff --git a/net/ipv4/ipvs/ip_vs_proto_udp.c b/net/ipv4/ipvs/ip_vs_proto_udp.c
index 54aa760..691c8b6 100644
--- a/net/ipv4/ipvs/ip_vs_proto_udp.c
+++ b/net/ipv4/ipvs/ip_vs_proto_udp.c
@@ -122,10 +122,10 @@
{
uhdr->check =
ip_vs_check_diff(~oldip, newip,
- ip_vs_check_diff(oldport ^ htonl(0xFFFF),
+ ip_vs_check_diff(oldport ^ htons(0xFFFF),
newport, uhdr->check));
if (!uhdr->check)
- uhdr->check = htonl(0xFFFF);
+ uhdr->check = -1;
}
static int
@@ -173,7 +173,7 @@
cp->protocol,
(*pskb)->csum);
if (udph->check == 0)
- udph->check = htonl(0xFFFF);
+ udph->check = -1;
IP_VS_DBG(11, "O-pkt: %s O-csum=%d (+%zd)\n",
pp->name, udph->check,
(char*)&(udph->check) - (char*)udph);
@@ -228,7 +228,7 @@
cp->protocol,
(*pskb)->csum);
if (udph->check == 0)
- udph->check = 0xFFFF;
+ udph->check = -1;
(*pskb)->ip_summed = CHECKSUM_UNNECESSARY;
}
return 1;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 66e9a72..4322318 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2270,7 +2270,7 @@
thash_entries,
(num_physpages >= 128 * 1024) ?
13 : 15,
- HASH_HIGHMEM,
+ 0,
&tcp_hashinfo.ehash_size,
NULL,
0);
@@ -2286,7 +2286,7 @@
tcp_hashinfo.ehash_size,
(num_physpages >= 128 * 1024) ?
13 : 15,
- HASH_HIGHMEM,
+ 0,
&tcp_hashinfo.bhash_size,
NULL,
64 * 1024);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 41a8a5f..73eb8c3 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1742,6 +1742,7 @@
void ndisc_cleanup(void)
{
+ unregister_netdevice_notifier(&ndisc_netdev_notifier);
#ifdef CONFIG_SYSCTL
neigh_sysctl_unregister(&nd_tbl.parms);
#endif
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index b481a4d..be699f8 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -854,3 +854,4 @@
module_init(sit_init);
module_exit(sit_cleanup);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("sit0");
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index bef3f61..76c6615 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -83,13 +83,13 @@
struct ipx_interface *ipx_primary_net;
struct ipx_interface *ipx_internal_net;
-extern int ipxrtr_add_route(__u32 network, struct ipx_interface *intrfc,
+extern int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
unsigned char *node);
extern void ipxrtr_del_routes(struct ipx_interface *intrfc);
extern int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
struct iovec *iov, int len, int noblock);
extern int ipxrtr_route_skb(struct sk_buff *skb);
-extern struct ipx_route *ipxrtr_lookup(__u32 net);
+extern struct ipx_route *ipxrtr_lookup(__be32 net);
extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
#undef IPX_REFCNT_DEBUG
@@ -177,7 +177,7 @@
}
static struct ipx_interface *__ipxitf_find_using_phys(struct net_device *dev,
- unsigned short datalink)
+ __be16 datalink)
{
struct ipx_interface *i;
@@ -190,7 +190,7 @@
}
static struct ipx_interface *ipxitf_find_using_phys(struct net_device *dev,
- unsigned short datalink)
+ __be16 datalink)
{
struct ipx_interface *i;
@@ -202,7 +202,7 @@
return i;
}
-struct ipx_interface *ipxitf_find_using_net(__u32 net)
+struct ipx_interface *ipxitf_find_using_net(__be32 net)
{
struct ipx_interface *i;
@@ -237,7 +237,7 @@
/* caller must hold intrfc->if_sklist_lock */
static struct sock *__ipxitf_find_socket(struct ipx_interface *intrfc,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
struct hlist_node *node;
@@ -252,7 +252,7 @@
/* caller must hold a reference to intrfc */
static struct sock *ipxitf_find_socket(struct ipx_interface *intrfc,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
@@ -268,7 +268,7 @@
#ifdef CONFIG_IPX_INTERN
static struct sock *ipxitf_find_internal_socket(struct ipx_interface *intrfc,
unsigned char *ipx_node,
- unsigned short port)
+ __be16 port)
{
struct sock *s;
struct hlist_node *node;
@@ -600,10 +600,10 @@
/* see if we need to include the netnum in the route list */
if (IPX_SKB_CB(skb)->last_hop.index >= 0) {
- u32 *last_hop = (u32 *)(((u8 *) skb->data) +
+ __be32 *last_hop = (__be32 *)(((u8 *) skb->data) +
sizeof(struct ipxhdr) +
IPX_SKB_CB(skb)->last_hop.index *
- sizeof(u32));
+ sizeof(__be32));
*last_hop = IPX_SKB_CB(skb)->last_hop.netnum;
IPX_SKB_CB(skb)->last_hop.index = -1;
}
@@ -772,7 +772,7 @@
} else {
printk(KERN_WARNING "IPX: Network number collision "
"%lx\n %s %s and %s %s\n",
- (unsigned long) htonl(cb->ipx_source_net),
+ (unsigned long) ntohl(cb->ipx_source_net),
ipx_device_name(i),
ipx_frame_name(i->if_dlink_type),
ipx_device_name(intrfc),
@@ -812,7 +812,7 @@
int i, rc = -EINVAL;
struct ipx_interface *ifcs;
char *c;
- u32 *l;
+ __be32 *l;
/* Illegal packet - too many hops or too short */
/* We decide to throw it away: no broadcasting, no local processing.
@@ -833,7 +833,7 @@
goto out;
c = ((u8 *) ipx) + sizeof(struct ipxhdr);
- l = (u32 *) c;
+ l = (__be32 *) c;
/* Don't broadcast packet if already seen this net */
for (i = 0; i < IPX_SKB_CB(skb)->ipx_tctrl; i++)
@@ -855,7 +855,7 @@
/* That aren't in the list */
if (ifcs == intrfc)
continue;
- l = (__u32 *) c;
+ l = (__be32 *) c;
/* don't consider the last entry in the packet list,
* it is our netnum, and it is not there yet */
for (i = 0; i < IPX_SKB_CB(skb)->ipx_tctrl; i++)
@@ -885,8 +885,8 @@
ipx_primary_net = intrfc;
}
-static struct ipx_interface *ipxitf_alloc(struct net_device *dev, __u32 netnum,
- unsigned short dlink_type,
+static struct ipx_interface *ipxitf_alloc(struct net_device *dev, __be32 netnum,
+ __be16 dlink_type,
struct datalink_proto *dlink,
unsigned char internal,
int ipx_offset)
@@ -960,7 +960,7 @@
static int ipxitf_create(struct ipx_interface_definition *idef)
{
struct net_device *dev;
- unsigned short dlink_type = 0;
+ __be16 dlink_type = 0;
struct datalink_proto *datalink = NULL;
struct ipx_interface *intrfc;
int rc;
@@ -1073,7 +1073,7 @@
static int ipxitf_delete(struct ipx_interface_definition *idef)
{
struct net_device *dev = NULL;
- unsigned short dlink_type = 0;
+ __be16 dlink_type = 0;
struct ipx_interface *intrfc;
int rc = 0;
@@ -1110,7 +1110,7 @@
}
static struct ipx_interface *ipxitf_auto_create(struct net_device *dev,
- unsigned short dlink_type)
+ __be16 dlink_type)
{
struct ipx_interface *intrfc = NULL;
struct datalink_proto *datalink;
@@ -1122,7 +1122,7 @@
if (dev->addr_len > IPX_NODE_LEN)
goto out;
- switch (htons(dlink_type)) {
+ switch (ntohs(dlink_type)) {
case ETH_P_IPX: datalink = pEII_datalink; break;
case ETH_P_802_2: datalink = p8022_datalink; break;
case ETH_P_SNAP: datalink = pSNAP_datalink; break;
@@ -1234,27 +1234,27 @@
/* Note: We assume ipx_tctrl==0 and htons(length)==ipx_pktsize */
/* This functions should *not* mess with packet contents */
-__u16 ipx_cksum(struct ipxhdr *packet, int length)
+__be16 ipx_cksum(struct ipxhdr *packet, int length)
{
/*
* NOTE: sum is a net byte order quantity, which optimizes the
* loop. This only works on big and little endian machines. (I
* don't know of a machine that isn't.)
*/
- /* start at ipx_dest - We skip the checksum field and start with
- * ipx_type before the loop, not considering ipx_tctrl in the calc */
- __u16 *p = (__u16 *)&packet->ipx_dest;
- __u32 i = (length >> 1) - 1; /* Number of complete words */
- __u32 sum = packet->ipx_type << sizeof(packet->ipx_tctrl);
+ /* handle the first 3 words separately; checksum should be skipped
+ * and ipx_tctrl masked out */
+ __u16 *p = (__u16 *)packet;
+ __u32 sum = p[1] + (p[2] & (__force u16)htons(0x00ff));
+ __u32 i = (length >> 1) - 3; /* Number of remaining complete words */
- /* Loop through all complete words except the checksum field,
- * ipx_type (accounted above) and ipx_tctrl (not used in the cksum) */
- while (--i)
+ /* Loop through them */
+ p += 3;
+ while (i--)
sum += *p++;
/* Add on the last part word if it exists */
if (packet->ipx_pktsize & htons(1))
- sum += ntohs(0xff00) & *p;
+ sum += (__force u16)htons(0xff00) & *p;
/* Do final fixup */
sum = (sum & 0xffff) + (sum >> 16);
@@ -1263,10 +1263,17 @@
if (sum >= 0x10000)
sum++;
- return ~sum;
+ /*
+ * Leave 0 alone; we don't want 0xffff here. Note that we can't get
+ * here with 0x10000, so this check is the same as ((__u16)sum)
+ */
+ if (sum)
+ sum = ~sum;
+
+ return (__force __be16)sum;
}
-const char *ipx_frame_name(unsigned short frame)
+const char *ipx_frame_name(__be16 frame)
{
char* rc = "None";
@@ -1401,7 +1408,7 @@
/* caller must hold a reference to intrfc */
-static unsigned short ipx_first_free_socketnum(struct ipx_interface *intrfc)
+static __be16 ipx_first_free_socketnum(struct ipx_interface *intrfc)
{
unsigned short socketNum = intrfc->if_sknum;
@@ -1410,7 +1417,7 @@
if (socketNum < IPX_MIN_EPHEMERAL_SOCKET)
socketNum = IPX_MIN_EPHEMERAL_SOCKET;
- while (__ipxitf_find_socket(intrfc, ntohs(socketNum)))
+ while (__ipxitf_find_socket(intrfc, htons(socketNum)))
if (socketNum > IPX_MAX_EPHEMERAL_SOCKET)
socketNum = IPX_MIN_EPHEMERAL_SOCKET;
else
@@ -1419,7 +1426,7 @@
spin_unlock_bh(&intrfc->if_sklist_lock);
intrfc->if_sknum = socketNum;
- return ntohs(socketNum);
+ return htons(socketNum);
}
static int ipx_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
@@ -1473,7 +1480,7 @@
ipxs->port)) {
SOCK_DEBUG(sk,
"IPX: bind failed because port %X in use.\n",
- ntohs((int)addr->sipx_port));
+ ntohs(addr->sipx_port));
goto out_put;
}
} else {
@@ -1488,7 +1495,7 @@
if (ipxitf_find_socket(intrfc, addr->sipx_port)) {
SOCK_DEBUG(sk,
"IPX: bind failed because port %X in use.\n",
- ntohs((int)addr->sipx_port));
+ ntohs(addr->sipx_port));
goto out_put;
}
}
@@ -1665,7 +1672,7 @@
intrfc = ipxitf_find_using_phys(dev, pt->type);
if (!intrfc) {
if (ipxcfg_auto_create_interfaces &&
- ntohl(IPX_SKB_CB(skb)->ipx_dest_net)) {
+ IPX_SKB_CB(skb)->ipx_dest_net) {
intrfc = ipxitf_auto_create(dev, pt->type);
if (intrfc)
ipxitf_hold(intrfc);
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index 4c0c712..b7463df 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -260,22 +260,22 @@
ipxs = ipx_sk(s);
#ifdef CONFIG_IPX_INTERN
seq_printf(seq, "%08lX:%02X%02X%02X%02X%02X%02X:%04X ",
- (unsigned long)htonl(ipxs->intrfc->if_netnum),
+ (unsigned long)ntohl(ipxs->intrfc->if_netnum),
ipxs->node[0], ipxs->node[1], ipxs->node[2], ipxs->node[3],
- ipxs->node[4], ipxs->node[5], htons(ipxs->port));
+ ipxs->node[4], ipxs->node[5], ntohs(ipxs->port));
#else
- seq_printf(seq, "%08lX:%04X ", (unsigned long) htonl(ipxs->intrfc->if_netnum),
- htons(ipxs->port));
+ seq_printf(seq, "%08lX:%04X ", (unsigned long) ntohl(ipxs->intrfc->if_netnum),
+ ntohs(ipxs->port));
#endif /* CONFIG_IPX_INTERN */
if (s->sk_state != TCP_ESTABLISHED)
seq_printf(seq, "%-28s", "Not_Connected");
else {
seq_printf(seq, "%08lX:%02X%02X%02X%02X%02X%02X:%04X ",
- (unsigned long)htonl(ipxs->dest_addr.net),
+ (unsigned long)ntohl(ipxs->dest_addr.net),
ipxs->dest_addr.node[0], ipxs->dest_addr.node[1],
ipxs->dest_addr.node[2], ipxs->dest_addr.node[3],
ipxs->dest_addr.node[4], ipxs->dest_addr.node[5],
- htons(ipxs->dest_addr.sock));
+ ntohs(ipxs->dest_addr.sock));
}
seq_printf(seq, "%08X %08X %02X %03d\n",
diff --git a/net/ipx/ipx_route.c b/net/ipx/ipx_route.c
index a30dbb1..68560ee 100644
--- a/net/ipx/ipx_route.c
+++ b/net/ipx/ipx_route.c
@@ -19,17 +19,17 @@
extern struct ipx_interface *ipx_internal_net;
-extern __u16 ipx_cksum(struct ipxhdr *packet, int length);
-extern struct ipx_interface *ipxitf_find_using_net(__u32 net);
+extern __be16 ipx_cksum(struct ipxhdr *packet, int length);
+extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb,
char *node);
-extern struct ipx_interface *ipxitf_find_using_net(__u32 net);
+extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
-struct ipx_route *ipxrtr_lookup(__u32 net)
+struct ipx_route *ipxrtr_lookup(__be32 net)
{
struct ipx_route *r;
@@ -48,7 +48,7 @@
/*
* Caller must hold a reference to intrfc
*/
-int ipxrtr_add_route(__u32 network, struct ipx_interface *intrfc,
+int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
unsigned char *node)
{
struct ipx_route *rt;
@@ -118,7 +118,7 @@
return rc;
}
-static int ipxrtr_delete(__u32 net)
+static int ipxrtr_delete(__be32 net)
{
struct ipx_route *r, *tmp;
int rc;
@@ -238,7 +238,7 @@
/* Apply checksum. Not allowed on 802.3 links. */
if (sk->sk_no_check || intrfc->if_dlink_type == htons(IPX_FRAME_8023))
- ipx->ipx_checksum = 0xFFFF;
+ ipx->ipx_checksum = htons(0xFFFF);
else
ipx->ipx_checksum = ipx_cksum(ipx, len + sizeof(struct ipxhdr));
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index b59d3b2..b2bf8f2 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -427,7 +427,7 @@
nfmsg->version = NFNETLINK_V0;
nfmsg->res_id = htons(inst->group_num);
- pmsg.hw_protocol = htons(skb->protocol);
+ pmsg.hw_protocol = skb->protocol;
pmsg.hook = hooknum;
NFA_PUT(inst->skb, NFULA_PACKET_HDR, sizeof(pmsg), &pmsg);
@@ -878,7 +878,7 @@
params = NFA_DATA(nfula[NFULA_CFG_MODE-1]);
nfulnl_set_mode(inst, params->copy_mode,
- ntohs(params->copy_range));
+ ntohl(params->copy_range));
}
if (nfula[NFULA_CFG_TIMEOUT-1]) {
@@ -896,8 +896,8 @@
}
if (nfula[NFULA_CFG_QTHRESH-1]) {
- u_int32_t qthresh =
- *(u_int16_t *)NFA_DATA(nfula[NFULA_CFG_QTHRESH-1]);
+ __be32 qthresh =
+ *(__be32 *)NFA_DATA(nfula[NFULA_CFG_QTHRESH-1]);
nfulnl_set_qthresh(inst, ntohl(qthresh));
}
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 8eb2473..6e4ada3 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -414,7 +414,7 @@
nfmsg->res_id = htons(queue->queue_num);
pmsg.packet_id = htonl(entry->id);
- pmsg.hw_protocol = htons(entskb->protocol);
+ pmsg.hw_protocol = entskb->protocol;
pmsg.hook = entinf->hook;
NFA_PUT(skb, NFQA_PACKET_HDR, sizeof(pmsg), &pmsg);
diff --git a/net/netlabel/Kconfig b/net/netlabel/Kconfig
index 9f7121a..56958c8 100644
--- a/net/netlabel/Kconfig
+++ b/net/netlabel/Kconfig
@@ -4,7 +4,7 @@
config NETLABEL
bool "NetLabel subsystem support"
- depends on NET && SECURITY
+ depends on SECURITY
default n
---help---
NetLabel provides support for explicit network packet labeling
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 9b9c555..4b52fa7 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1284,8 +1284,7 @@
struct htb_class, sibling));
/* note: this delete may happen twice (see htb_delete) */
- if (!hlist_unhashed(&cl->hlist))
- hlist_del(&cl->hlist);
+ hlist_del_init(&cl->hlist);
list_del(&cl->sibling);
if (cl->prio_activity)
@@ -1333,8 +1332,7 @@
sch_tree_lock(sch);
/* delete from hash and active; remainder in destroy_class */
- if (!hlist_unhashed(&cl->hlist))
- hlist_del(&cl->hlist);
+ hlist_del_init(&cl->hlist);
if (cl->prio_activity)
htb_deactivate(q, cl);
diff --git a/net/sunrpc/svcauth.c b/net/sunrpc/svcauth.c
index 0004c1f..ee9bb15 100644
--- a/net/sunrpc/svcauth.c
+++ b/net/sunrpc/svcauth.c
@@ -126,6 +126,7 @@
if (atomic_dec_and_lock(&dom->ref.refcount, &auth_domain_lock)) {
hlist_del(&dom->hash);
dom->flavour->domain_release(dom);
+ spin_unlock(&auth_domain_lock);
}
}
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 4ab6cbf0..d6071cb 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -250,7 +250,7 @@
void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
/*
- * Document spåecific function(s) in a file.
+ * Document specific function(s) in a file.
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function function1 [-function function2]
*/
diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index e8ad1f6..b49584c 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -6,6 +6,8 @@
*.tab.c
*.tab.h
zconf.hash.c
+*.moc
+lkc_defs.h
#
# configuration programs