arch/arm/mach-msm/board-msm7x27a.c

/* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio_event.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/msm_hsusb.h>
#include <mach/rpc_hsusb.h>
#include <mach/rpc_pmapp.h>
#include <mach/usbdiag.h>
#include <mach/msm_memtypes.h>
#include <mach/msm_serial_hs.h>
#include <linux/usb/android.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/vreg.h>
#include <mach/pmic.h>
#include <mach/socinfo.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/mmc.h>
#include <linux/i2c.h>
#include <linux/i2c/sx150x.h>
#include <linux/gpio.h>
#include <linux/android_pmem.h>
#include <linux/bootmem.h>
#include <linux/mfd/marimba.h>
#include <mach/vreg.h>
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <mach/rpc_pmapp.h>
#include <mach/msm_battery.h>
#include <linux/smsc911x.h>
#include <linux/atmel_maxtouch.h>
#include "devices.h"
#include "timer.h"
#include "board-msm7x27a-regulator.h"
#include "devices-msm7x2xa.h"
#include "pm.h"
#include <mach/rpc_server_handset.h>
#include <mach/socinfo.h>
#include "pm-boot.h"
#include "board-msm7627a.h"

#define PMEM_KERNEL_EBI1_SIZE	0x3A000
#define MSM_PMEM_AUDIO_SIZE	0x5B000

#if defined(CONFIG_GPIO_SX150X)
enum {
	SX150X_CORE,
};

static struct sx150x_platform_data sx150x_data[] __initdata = {
	[SX150X_CORE]	= {
		.gpio_base		= GPIO_CORE_EXPANDER_BASE,
		.oscio_is_gpo		= false,
		.io_pullup_ena		= 0,
		.io_pulldn_ena		= 0x02,
		.io_open_drain_ena	= 0xfef8,
		.irq_summary		= -1,
	},
};
#endif


static struct platform_device msm_wlan_ar6000_pm_device = {
	.name           = "wlan_ar6000_pm_dev",
	.id             = -1,
};

#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
static struct i2c_board_info core_exp_i2c_info[] __initdata = {
	{
		I2C_BOARD_INFO("sx1509q", 0x3e),
	},
};

static void __init register_i2c_devices(void)
{
	if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf())
		sx150x_data[SX150X_CORE].io_open_drain_ena = 0xe0f0;

	core_exp_i2c_info[0].platform_data =
			&sx150x_data[SX150X_CORE];

	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
				core_exp_i2c_info,
				ARRAY_SIZE(core_exp_i2c_info));
}
#endif

static struct msm_gpio qup_i2c_gpios_io[] = {
	{ GPIO_CFG(60, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(61, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
	{ GPIO_CFG(131, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(132, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
};

static struct msm_gpio qup_i2c_gpios_hw[] = {
	{ GPIO_CFG(60, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(61, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
	{ GPIO_CFG(131, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(132, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
};

static void gsbi_qup_i2c_gpio_config(int adap_id, int config_type)
{
	int rc;

	if (adap_id < 0 || adap_id > 1)
		return;

	/* Each adapter gets 2 lines from the table */
	if (config_type)
		rc = msm_gpios_request_enable(&qup_i2c_gpios_hw[adap_id*2], 2);
	else
		rc = msm_gpios_request_enable(&qup_i2c_gpios_io[adap_id*2], 2);
	if (rc < 0)
		pr_err("QUP GPIO request/enable failed: %d\n", rc);
}

static struct msm_i2c_platform_data msm_gsbi0_qup_i2c_pdata = {
	.clk_freq		= 100000,
	.msm_i2c_config_gpio	= gsbi_qup_i2c_gpio_config,
};

static struct msm_i2c_platform_data msm_gsbi1_qup_i2c_pdata = {
	.clk_freq		= 100000,
	.msm_i2c_config_gpio	= gsbi_qup_i2c_gpio_config,
};

static struct msm_i2c_platform_data msm8625_gsbi0_qup_i2c_pdata = {
	.clk_freq		= 100000,
};

#ifdef CONFIG_ARCH_MSM7X27A
#define MSM_PMEM_MDP_SIZE       0x2300000
#define MSM7x25A_MSM_PMEM_MDP_SIZE       0x1500000

#define MSM_PMEM_ADSP_SIZE      0x1100000
#define MSM7x25A_MSM_PMEM_ADSP_SIZE      0xB91000

#endif

static struct android_usb_platform_data android_usb_pdata = {
	.update_pid_and_serial_num = usb_diag_update_pid_and_serial_num,
};

static struct platform_device android_usb_device = {
	.name	= "android_usb",
	.id	= -1,
	.dev	= {
		.platform_data = &android_usb_pdata,
	},
};

#ifdef CONFIG_USB_EHCI_MSM_72K
static void msm_hsusb_vbus_power(unsigned phy_info, int on)
{
	int rc = 0;
	unsigned gpio;

	gpio = GPIO_HOST_VBUS_EN;

	rc = gpio_request(gpio, "i2c_host_vbus_en");
	if (rc < 0) {
		pr_err("failed to request %d GPIO\n", gpio);
		return;
	}
	gpio_direction_output(gpio, !!on);
	gpio_set_value_cansleep(gpio, !!on);
	gpio_free(gpio);
}

static struct msm_usb_host_platform_data msm_usb_host_pdata = {
	.phy_info       = (USB_PHY_INTEGRATED | USB_PHY_MODEL_45NM),
};

static void __init msm7x2x_init_host(void)
{
	msm_add_host(0, &msm_usb_host_pdata);
}
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
static int hsusb_rpc_connect(int connect)
{
	if (connect)
		return msm_hsusb_rpc_connect();
	else
		return msm_hsusb_rpc_close();
}

static struct regulator *reg_hsusb;
static int msm_hsusb_ldo_init(int init)
{
	int rc = 0;

	if (init) {
		reg_hsusb = regulator_get(NULL, "usb");
		if (IS_ERR(reg_hsusb)) {
			rc = PTR_ERR(reg_hsusb);
			pr_err("%s: could not get regulator: %d\n",
					__func__, rc);
			goto out;
		}

		rc = regulator_set_voltage(reg_hsusb, 3300000, 3300000);
		if (rc) {
			pr_err("%s: could not set voltage: %d\n",
					__func__, rc);
			goto reg_free;
		}

		return 0;
	}
	/* else fall through */
reg_free:
	regulator_put(reg_hsusb);
out:
	reg_hsusb = NULL;
	return rc;
}

static int msm_hsusb_ldo_enable(int enable)
{
	static int ldo_status;

	if (IS_ERR_OR_NULL(reg_hsusb))
		return reg_hsusb ? PTR_ERR(reg_hsusb) : -ENODEV;

	if (ldo_status == enable)
		return 0;

	ldo_status = enable;

	return enable ?
		regulator_enable(reg_hsusb) :
		regulator_disable(reg_hsusb);
}

#ifndef CONFIG_USB_EHCI_MSM_72K
static int msm_hsusb_pmic_notif_init(void (*callback)(int online), int init)
{
	int ret = 0;

	if (init)
		ret = msm_pm_app_rpc_init(callback);
	else
		msm_pm_app_rpc_deinit(callback);

	return ret;
}
#endif

static struct msm_otg_platform_data msm_otg_pdata = {
#ifndef CONFIG_USB_EHCI_MSM_72K
	.pmic_vbus_notif_init	 = msm_hsusb_pmic_notif_init,
#else
	.vbus_power		 = msm_hsusb_vbus_power,
#endif
	.rpc_connect		 = hsusb_rpc_connect,
	.pemp_level		 = PRE_EMPHASIS_WITH_20_PERCENT,
	.cdr_autoreset		 = CDR_AUTO_RESET_DISABLE,
	.drv_ampl		 = HS_DRV_AMPLITUDE_DEFAULT,
	.se1_gating		 = SE1_GATING_DISABLE,
	.ldo_init		 = msm_hsusb_ldo_init,
	.ldo_enable		 = msm_hsusb_ldo_enable,
	.chg_init		 = hsusb_chg_init,
	.chg_connected		 = hsusb_chg_connected,
	.chg_vbus_draw		 = hsusb_chg_vbus_draw,
};
#endif

static struct msm_hsusb_gadget_platform_data msm_gadget_pdata = {
	.is_phy_status_timer_on = 1,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start = 0x90000300,
		.end   = 0x900003ff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = MSM_GPIO_TO_INT(4),
		.end   = MSM_GPIO_TO_INT(4),
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device smc91x_device = {
	.name           = "smc91x",
	.id             = 0,
	.num_resources  = ARRAY_SIZE(smc91x_resources),
	.resource       = smc91x_resources,
};

#ifdef CONFIG_SERIAL_MSM_HS
static struct msm_serial_hs_platform_data msm_uart_dm1_pdata = {
	.inject_rx_on_wakeup	= 1,
	.rx_to_inject		= 0xFD,
};
#endif
static struct msm_pm_platform_data msm7x27a_pm_data[MSM_PM_SLEEP_MODE_NR] = {
	[MSM_PM_SLEEP_MODE_POWER_COLLAPSE] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 16000,
					.residency = 20000,
	},
	[MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 12000,
					.residency = 20000,
	},
	[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 0,
					.suspend_enabled = 1,
					.latency = 2000,
					.residency = 0,
	},
	[MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 2,
					.residency = 0,
	},
};

static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = {
	.mode = MSM_PM_BOOT_CONFIG_RESET_VECTOR_PHYS,
	.p_addr = 0,
};

static struct android_pmem_platform_data android_pmem_adsp_pdata = {
	.name = "pmem_adsp",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 1,
	.memory_type = MEMTYPE_EBI1,
};

static struct platform_device android_pmem_adsp_device = {
	.name = "android_pmem",
	.id = 1,
	.dev = { .platform_data = &android_pmem_adsp_pdata },
};

static unsigned pmem_mdp_size = MSM_PMEM_MDP_SIZE;
static int __init pmem_mdp_size_setup(char *p)
{
	pmem_mdp_size = memparse(p, NULL);
	return 0;
}

early_param("pmem_mdp_size", pmem_mdp_size_setup);

static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
static int __init pmem_adsp_size_setup(char *p)
{
	pmem_adsp_size = memparse(p, NULL);
	return 0;
}

early_param("pmem_adsp_size", pmem_adsp_size_setup);

#define SND(desc, num) { .name = #desc, .id = num }
static struct snd_endpoint snd_endpoints_list[] = {
	SND(HANDSET, 0),
	SND(MONO_HEADSET, 2),
	SND(HEADSET, 3),
	SND(SPEAKER, 6),
	SND(TTY_HEADSET, 8),
	SND(TTY_VCO, 9),
	SND(TTY_HCO, 10),
	SND(BT, 12),
	SND(IN_S_SADC_OUT_HANDSET, 16),
	SND(IN_S_SADC_OUT_SPEAKER_PHONE, 25),
	SND(FM_DIGITAL_STEREO_HEADSET, 26),
	SND(FM_DIGITAL_SPEAKER_PHONE, 27),
	SND(FM_DIGITAL_BT_A2DP_HEADSET, 28),
	SND(STEREO_HEADSET_AND_SPEAKER, 31),
	SND(CURRENT, 0x7FFFFFFE),
	SND(FM_ANALOG_STEREO_HEADSET, 35),
	SND(FM_ANALOG_STEREO_HEADSET_CODEC, 36),
};
#undef SND

static struct msm_snd_endpoints msm_device_snd_endpoints = {
	.endpoints = snd_endpoints_list,
	.num = sizeof(snd_endpoints_list) / sizeof(struct snd_endpoint)
};

static struct platform_device msm_device_snd = {
	.name = "msm_snd",
	.id = -1,
	.dev    = {
		.platform_data = &msm_device_snd_endpoints
	},
};

#define DEC0_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC1_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC2_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC3_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC4_FORMAT (1<<MSM_ADSP_CODEC_MIDI)

static unsigned int dec_concurrency_table[] = {
	/* Audio LP */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DMA)), 0,
	0, 0, 0,

	/* Concurrency 1 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	 /* Concurrency 2 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 3 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 4 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 5 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 6 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	0, 0, 0, 0,

	/* Concurrency 7 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),
};

#define DEC_INFO(name, queueid, decid, nr_codec) { .module_name = name, \
	.module_queueid = queueid, .module_decid = decid, \
	.nr_codec_support = nr_codec}

static struct msm_adspdec_info dec_info_list[] = {
	DEC_INFO("AUDPLAY0TASK", 13, 0, 11), /* AudPlay0BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY1TASK", 14, 1, 11),  /* AudPlay1BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY2TASK", 15, 2, 11),  /* AudPlay2BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY3TASK", 16, 3, 11),  /* AudPlay3BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY4TASK", 17, 4, 1),  /* AudPlay4BitStreamCtrlQueue */
};

static struct msm_adspdec_database msm_device_adspdec_database = {
	.num_dec = ARRAY_SIZE(dec_info_list),
	.num_concurrency_support = (ARRAY_SIZE(dec_concurrency_table) / \
					ARRAY_SIZE(dec_info_list)),
	.dec_concurrency_table = dec_concurrency_table,
	.dec_info_list = dec_info_list,
};

static struct platform_device msm_device_adspdec = {
	.name = "msm_adspdec",
	.id = -1,
	.dev    = {
		.platform_data = &msm_device_adspdec_database
	},
};

static struct android_pmem_platform_data android_pmem_audio_pdata = {
	.name = "pmem_audio",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 0,
	.memory_type = MEMTYPE_EBI1,
};

static struct platform_device android_pmem_audio_device = {
	.name = "android_pmem",
	.id = 2,
	.dev = { .platform_data = &android_pmem_audio_pdata },
};

static struct android_pmem_platform_data android_pmem_pdata = {
	.name = "pmem",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 1,
	.memory_type = MEMTYPE_EBI1,
};
static struct platform_device android_pmem_device = {
	.name = "android_pmem",
	.id = 0,
	.dev = { .platform_data = &android_pmem_pdata },
};

static u32 msm_calculate_batt_capacity(u32 current_voltage);

static struct msm_psy_batt_pdata msm_psy_batt_data = {
	.voltage_min_design     = 2800,
	.voltage_max_design     = 4300,
	.avail_chg_sources      = AC_CHG | USB_CHG ,
	.batt_technology        = POWER_SUPPLY_TECHNOLOGY_LION,
	.calculate_capacity     = &msm_calculate_batt_capacity,
};

static u32 msm_calculate_batt_capacity(u32 current_voltage)
{
	u32 low_voltage	 = msm_psy_batt_data.voltage_min_design;
	u32 high_voltage = msm_psy_batt_data.voltage_max_design;

	return (current_voltage - low_voltage) * 100
			/ (high_voltage - low_voltage);
}

static struct platform_device msm_batt_device = {
	.name               = "msm-battery",
	.id                 = -1,
	.dev.platform_data  = &msm_psy_batt_data,
};

static struct smsc911x_platform_config smsc911x_config = {
	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
	.flags		= SMSC911X_USE_16BIT,
};

static struct resource smsc911x_resources[] = {
	[0] = {
		.start	= 0x90000000,
		.end	= 0x90007fff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= MSM_GPIO_TO_INT(48),
		.end	= MSM_GPIO_TO_INT(48),
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
	},
};

static struct platform_device smsc911x_device = {
	.name		= "smsc911x",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(smsc911x_resources),
	.resource	= smsc911x_resources,
	.dev		= {
		.platform_data	= &smsc911x_config,
	},
};

static struct msm_gpio smsc911x_gpios[] = {
	{ GPIO_CFG(48, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_6MA),
							 "smsc911x_irq"  },
	{ GPIO_CFG(49, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_6MA),
							 "eth_fifo_sel" },
};

#define ETH_FIFO_SEL_GPIO	49
static void msm7x27a_cfg_smsc911x(void)
{
	int res;

	res = msm_gpios_request_enable(smsc911x_gpios,
				 ARRAY_SIZE(smsc911x_gpios));
	if (res) {
		pr_err("%s: unable to enable gpios for SMSC911x\n", __func__);
		return;
	}

	/* ETH_FIFO_SEL */
	res = gpio_direction_output(ETH_FIFO_SEL_GPIO, 0);
	if (res) {
		pr_err("%s: unable to get direction for gpio %d\n", __func__,
							 ETH_FIFO_SEL_GPIO);
		msm_gpios_disable_free(smsc911x_gpios,
						 ARRAY_SIZE(smsc911x_gpios));
		return;
	}
	gpio_set_value(ETH_FIFO_SEL_GPIO, 0);
}

#if defined(CONFIG_SERIAL_MSM_HSL_CONSOLE) \
		&& defined(CONFIG_MSM_SHARED_GPIO_FOR_UART2DM)
static struct msm_gpio uart2dm_gpios[] = {
	{GPIO_CFG(19, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
							"uart2dm_rfr_n" },
	{GPIO_CFG(20, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
							"uart2dm_cts_n" },
	{GPIO_CFG(21, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
							"uart2dm_rx"    },
	{GPIO_CFG(108, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
							"uart2dm_tx"    },
};

static void msm7x27a_cfg_uart2dm_serial(void)
{
	int ret;
	ret = msm_gpios_request_enable(uart2dm_gpios,
					ARRAY_SIZE(uart2dm_gpios));
	if (ret)
		pr_err("%s: unable to enable gpios for uart2dm\n", __func__);
}
#else
static void msm7x27a_cfg_uart2dm_serial(void) { }
#endif

static struct platform_device *rumi_sim_devices[] __initdata = {
	&msm_device_dmov,
	&msm_device_smd,
	&smc91x_device,
	&msm_device_uart1,
	&msm_device_nand,
	&msm_device_uart_dm1,
	&msm_gsbi0_qup_i2c_device,
	&msm_gsbi1_qup_i2c_device,
};

static struct platform_device *msm8625_rumi3_devices[] __initdata = {
	&msm8625_device_dmov,
	&msm8625_device_uart1,
	&msm8625_device_qup_i2c_gsbi0,
};

static struct platform_device *surf_ffa_devices[] __initdata = {
	&msm_device_dmov,
	&msm_device_smd,
	&msm_device_uart1,
	&msm_device_uart_dm1,
	&msm_device_uart_dm2,
	&msm_device_nand,
	&msm_gsbi0_qup_i2c_device,
	&msm_gsbi1_qup_i2c_device,
	&msm_device_otg,
	&msm_device_gadget_peripheral,
	&android_usb_device,
	&android_pmem_device,
	&android_pmem_adsp_device,
	&android_pmem_audio_device,
	&msm_device_snd,
	&msm_device_adspdec,
	&msm_batt_device,
	&smsc911x_device,
	&msm_kgsl_3d0,
#ifdef CONFIG_BT
	&msm_bt_power_device,
#endif
	&asoc_msm_pcm,
	&asoc_msm_dai0,
	&asoc_msm_dai1,
};

static unsigned pmem_kernel_ebi1_size = PMEM_KERNEL_EBI1_SIZE;
static int __init pmem_kernel_ebi1_size_setup(char *p)
{
	pmem_kernel_ebi1_size = memparse(p, NULL);
	return 0;
}
early_param("pmem_kernel_ebi1_size", pmem_kernel_ebi1_size_setup);

static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE;
static int __init pmem_audio_size_setup(char *p)
{
	pmem_audio_size = memparse(p, NULL);
	return 0;
}
early_param("pmem_audio_size", pmem_audio_size_setup);

static struct memtype_reserve msm7x27a_reserve_table[] __initdata = {
	[MEMTYPE_SMI] = {
	},
	[MEMTYPE_EBI0] = {
		.flags	=	MEMTYPE_FLAGS_1M_ALIGN,
	},
	[MEMTYPE_EBI1] = {
		.flags	=	MEMTYPE_FLAGS_1M_ALIGN,
	},
};

static void __init size_pmem_devices(void)
{

	if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
		pmem_mdp_size = MSM7x25A_MSM_PMEM_MDP_SIZE;
		pmem_adsp_size = MSM7x25A_MSM_PMEM_ADSP_SIZE;
	} else {
		pmem_mdp_size = MSM_PMEM_MDP_SIZE;
		pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
	}

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_adsp_pdata.size = pmem_adsp_size;
	android_pmem_pdata.size = pmem_mdp_size;
	android_pmem_audio_pdata.size = pmem_audio_size;
#endif
}

static void __init reserve_memory_for(struct android_pmem_platform_data *p)
{
	msm7x27a_reserve_table[p->memory_type].size += p->size;
}

static void __init reserve_pmem_memory(void)
{
#ifdef CONFIG_ANDROID_PMEM
	reserve_memory_for(&android_pmem_adsp_pdata);
	reserve_memory_for(&android_pmem_pdata);
	reserve_memory_for(&android_pmem_audio_pdata);
	msm7x27a_reserve_table[MEMTYPE_EBI1].size += pmem_kernel_ebi1_size;
#endif
}

static void __init msm7x27a_calculate_reserve_sizes(void)
{
	size_pmem_devices();
	reserve_pmem_memory();
}

static int msm7x27a_paddr_to_memtype(unsigned int paddr)
{
	return MEMTYPE_EBI1;
}

static struct reserve_info msm7x27a_reserve_info __initdata = {
	.memtype_reserve_table = msm7x27a_reserve_table,
	.calculate_reserve_sizes = msm7x27a_calculate_reserve_sizes,
	.paddr_to_memtype = msm7x27a_paddr_to_memtype,
};

static void __init msm7x27a_reserve(void)
{
	reserve_info = &msm7x27a_reserve_info;
	msm_reserve();
}

static void __init msm8625_reserve(void)
{
	memblock_remove(MSM8625_SECONDARY_PHYS, SZ_8);
}

static void __init msm_device_i2c_init(void)
{
	if (machine_is_msm8625_rumi3()) {
		msm8625_device_qup_i2c_gsbi0.dev.platform_data =
			&msm8625_gsbi0_qup_i2c_pdata;
		return;
	}

	msm_gsbi0_qup_i2c_device.dev.platform_data = &msm_gsbi0_qup_i2c_pdata;
	msm_gsbi1_qup_i2c_device.dev.platform_data = &msm_gsbi1_qup_i2c_pdata;
}

#define MSM_EBI2_PHYS			0xa0d00000
#define MSM_EBI2_XMEM_CS2_CFG1		0xa0d10030

static void __init msm7x27a_init_ebi2(void)
{
	uint32_t ebi2_cfg;
	void __iomem *ebi2_cfg_ptr;

	ebi2_cfg_ptr = ioremap_nocache(MSM_EBI2_PHYS, sizeof(uint32_t));
	if (!ebi2_cfg_ptr)
		return;

	ebi2_cfg = readl(ebi2_cfg_ptr);
	if (machine_is_msm7x27a_rumi3() || machine_is_msm7x27a_surf() ||
			machine_is_msm7625a_surf())
		ebi2_cfg |= (1 << 4); /* CS2 */

	writel(ebi2_cfg, ebi2_cfg_ptr);
	iounmap(ebi2_cfg_ptr);

	/* Enable A/D MUX[bit 31] from EBI2_XMEM_CS2_CFG1 */
	ebi2_cfg_ptr = ioremap_nocache(MSM_EBI2_XMEM_CS2_CFG1,
							 sizeof(uint32_t));
	if (!ebi2_cfg_ptr)
		return;

	ebi2_cfg = readl(ebi2_cfg_ptr);
	if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf())
		ebi2_cfg |= (1 << 31);

	writel(ebi2_cfg, ebi2_cfg_ptr);
	iounmap(ebi2_cfg_ptr);
}

#define ATMEL_TS_I2C_NAME "maXTouch"

static struct regulator_bulk_data regs_atmel[] = {
	{ .supply = "ldo2",  .min_uV = 2850000, .max_uV = 2850000 },
	{ .supply = "smps3", .min_uV = 1800000, .max_uV = 1800000 },
};

#define ATMEL_TS_GPIO_IRQ 82

static int atmel_ts_power_on(bool on)
{
	int rc = on ?
		regulator_bulk_enable(ARRAY_SIZE(regs_atmel), regs_atmel) :
		regulator_bulk_disable(ARRAY_SIZE(regs_atmel), regs_atmel);

	if (rc)
		pr_err("%s: could not %sable regulators: %d\n",
				__func__, on ? "en" : "dis", rc);
	else
		msleep(50);

	return rc;
}

static int atmel_ts_platform_init(struct i2c_client *client)
{
	int rc;
	struct device *dev = &client->dev;

	rc = regulator_bulk_get(dev, ARRAY_SIZE(regs_atmel), regs_atmel);
	if (rc) {
		dev_err(dev, "%s: could not get regulators: %d\n",
				__func__, rc);
		goto out;
	}

	rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_atmel), regs_atmel);
	if (rc) {
		dev_err(dev, "%s: could not set voltages: %d\n",
				__func__, rc);
		goto reg_free;
	}

	rc = gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0,
				GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
				GPIO_CFG_8MA), GPIO_CFG_ENABLE);
	if (rc) {
		dev_err(dev, "%s: gpio_tlmm_config for %d failed\n",
			__func__, ATMEL_TS_GPIO_IRQ);
		goto reg_free;
	}

	/* configure touchscreen interrupt gpio */
	rc = gpio_request(ATMEL_TS_GPIO_IRQ, "atmel_maxtouch_gpio");
	if (rc) {
		dev_err(dev, "%s: unable to request gpio %d\n",
			__func__, ATMEL_TS_GPIO_IRQ);
		goto ts_gpio_tlmm_unconfig;
	}

	rc = gpio_direction_input(ATMEL_TS_GPIO_IRQ);
	if (rc < 0) {
		dev_err(dev, "%s: unable to set the direction of gpio %d\n",
			__func__, ATMEL_TS_GPIO_IRQ);
		goto free_ts_gpio;
	}
	return 0;

free_ts_gpio:
	gpio_free(ATMEL_TS_GPIO_IRQ);
ts_gpio_tlmm_unconfig:
	gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0,
				GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
				GPIO_CFG_2MA), GPIO_CFG_DISABLE);
reg_free:
	regulator_bulk_free(ARRAY_SIZE(regs_atmel), regs_atmel);
out:
	return rc;
}

static int atmel_ts_platform_exit(struct i2c_client *client)
{
	gpio_free(ATMEL_TS_GPIO_IRQ);
	gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0,
				GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
				GPIO_CFG_2MA), GPIO_CFG_DISABLE);
	regulator_bulk_free(ARRAY_SIZE(regs_atmel), regs_atmel);
	return 0;
}

static u8 atmel_ts_read_chg(void)
{
	return gpio_get_value(ATMEL_TS_GPIO_IRQ);
}

static u8 atmel_ts_valid_interrupt(void)
{
	return !atmel_ts_read_chg();
}

#define ATMEL_X_OFFSET 13
#define ATMEL_Y_OFFSET 0

static struct maxtouch_platform_data atmel_ts_pdata = {
	.numtouch = 4,
	.init_platform_hw = atmel_ts_platform_init,
	.exit_platform_hw = atmel_ts_platform_exit,
	.power_on = atmel_ts_power_on,
	.display_res_x = 480,
	.display_res_y = 864,
	.min_x = ATMEL_X_OFFSET,
	.max_x = (505 - ATMEL_X_OFFSET),
	.min_y = ATMEL_Y_OFFSET,
	.max_y = (863 - ATMEL_Y_OFFSET),
	.valid_interrupt = atmel_ts_valid_interrupt,
	.read_chg = atmel_ts_read_chg,
};

static struct i2c_board_info atmel_ts_i2c_info[] __initdata = {
	{
		I2C_BOARD_INFO(ATMEL_TS_I2C_NAME, 0x4a),
		.platform_data = &atmel_ts_pdata,
		.irq = MSM_GPIO_TO_INT(ATMEL_TS_GPIO_IRQ),
	},
};

#define KP_INDEX(row, col) ((row)*ARRAY_SIZE(kp_col_gpios) + (col))

static unsigned int kp_row_gpios[] = {31, 32, 33, 34, 35};
static unsigned int kp_col_gpios[] = {36, 37, 38, 39, 40};

static const unsigned short keymap[ARRAY_SIZE(kp_col_gpios) *
					  ARRAY_SIZE(kp_row_gpios)] = {
	[KP_INDEX(0, 0)] = KEY_7,
	[KP_INDEX(0, 1)] = KEY_DOWN,
	[KP_INDEX(0, 2)] = KEY_UP,
	[KP_INDEX(0, 3)] = KEY_RIGHT,
	[KP_INDEX(0, 4)] = KEY_ENTER,

	[KP_INDEX(1, 0)] = KEY_LEFT,
	[KP_INDEX(1, 1)] = KEY_SEND,
	[KP_INDEX(1, 2)] = KEY_1,
	[KP_INDEX(1, 3)] = KEY_4,
	[KP_INDEX(1, 4)] = KEY_CLEAR,

	[KP_INDEX(2, 0)] = KEY_6,
	[KP_INDEX(2, 1)] = KEY_5,
	[KP_INDEX(2, 2)] = KEY_8,
	[KP_INDEX(2, 3)] = KEY_3,
	[KP_INDEX(2, 4)] = KEY_NUMERIC_STAR,

	[KP_INDEX(3, 0)] = KEY_9,
	[KP_INDEX(3, 1)] = KEY_NUMERIC_POUND,
	[KP_INDEX(3, 2)] = KEY_0,
	[KP_INDEX(3, 3)] = KEY_2,
	[KP_INDEX(3, 4)] = KEY_SLEEP,

	[KP_INDEX(4, 0)] = KEY_BACK,
	[KP_INDEX(4, 1)] = KEY_HOME,
	[KP_INDEX(4, 2)] = KEY_MENU,
	[KP_INDEX(4, 3)] = KEY_VOLUMEUP,
	[KP_INDEX(4, 4)] = KEY_VOLUMEDOWN,
};

/* SURF keypad platform device information */
static struct gpio_event_matrix_info kp_matrix_info = {
	.info.func	= gpio_event_matrix_func,
	.keymap		= keymap,
	.output_gpios	= kp_row_gpios,
	.input_gpios	= kp_col_gpios,
	.noutputs	= ARRAY_SIZE(kp_row_gpios),
	.ninputs	= ARRAY_SIZE(kp_col_gpios),
	.settle_time.tv_nsec = 40 * NSEC_PER_USEC,
	.poll_time.tv_nsec = 20 * NSEC_PER_MSEC,
	.flags		= GPIOKPF_LEVEL_TRIGGERED_IRQ | GPIOKPF_DRIVE_INACTIVE |
			  GPIOKPF_PRINT_UNMAPPED_KEYS,
};

static struct gpio_event_info *kp_info[] = {
	&kp_matrix_info.info
};

static struct gpio_event_platform_data kp_pdata = {
	.name		= "7x27a_kp",
	.info		= kp_info,
	.info_count	= ARRAY_SIZE(kp_info)
};

static struct platform_device kp_pdev = {
	.name	= GPIO_EVENT_DEV_NAME,
	.id	= -1,
	.dev	= {
		.platform_data	= &kp_pdata,
	},
};

static struct msm_handset_platform_data hs_platform_data = {
	.hs_name = "7k_handset",
	.pwr_key_delay_ms = 500, /* 0 will disable end key */
};

static struct platform_device hs_pdev = {
	.name   = "msm-handset",
	.id     = -1,
	.dev    = {
		.platform_data = &hs_platform_data,
	},
};

static struct platform_device msm_proccomm_regulator_dev = {
	.name   = PROCCOMM_REGULATOR_DEV_NAME,
	.id     = -1,
	.dev    = {
		.platform_data = &msm7x27a_proccomm_regulator_data
	}
};

static void __init msm7627a_rumi3_init(void)
{
	msm7x27a_init_ebi2();
	platform_add_devices(rumi_sim_devices,
			ARRAY_SIZE(rumi_sim_devices));
}

static void __init msm8625_rumi3_init(void)
{
	msm7x2x_misc_init();
	msm_device_i2c_init();
	platform_add_devices(msm8625_rumi3_devices,
			ARRAY_SIZE(msm8625_rumi3_devices));
}

#define LED_GPIO_PDM		96
#define UART1DM_RX_GPIO		45

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
static int __init msm7x27a_init_ar6000pm(void)
{
	msm_wlan_ar6000_pm_device.dev.platform_data = &ar600x_wlan_power;
	return platform_device_register(&msm_wlan_ar6000_pm_device);
}
#else
static int __init msm7x27a_init_ar6000pm(void) { return 0; }
#endif

static void __init msm7x27a_init_regulators(void)
{
	int rc = platform_device_register(&msm_proccomm_regulator_dev);
	if (rc)
		pr_err("%s: could not register regulator device: %d\n",
				__func__, rc);
}

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
	msm_otg_pdata.swfi_latency =
		msm7x27a_pm_data
		[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
	msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
	msm_device_gadget_peripheral.dev.platform_data =
		&msm_gadget_pdata;
	msm7x27a_cfg_smsc911x();
	platform_add_devices(msm_footswitch_devices,
			msm_num_footswitch_devices);
	platform_add_devices(surf_ffa_devices,
			ARRAY_SIZE(surf_ffa_devices));
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
	msm7627a_init_mmc();
#endif
	msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7x2x_init_host();
#endif

	msm_pm_set_platform_data(msm7x27a_pm_data,
				ARRAY_SIZE(msm7x27a_pm_data));
	BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));

#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
	register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
	if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
		atmel_ts_pdata.min_x = 0;
		atmel_ts_pdata.max_x = 480;
		atmel_ts_pdata.min_y = 0;
		atmel_ts_pdata.max_y = 320;
	}

	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
		atmel_ts_i2c_info,
		ARRAY_SIZE(atmel_ts_i2c_info));

#if defined(CONFIG_MSM_CAMERA)
	msm7627a_camera_init();
#endif
	platform_device_register(&kp_pdev);
	platform_device_register(&hs_pdev);

	/* configure it as a pdm function*/
	if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
				GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
				GPIO_CFG_8MA), GPIO_CFG_ENABLE))
		pr_err("%s: gpio_tlmm_config for %d failed\n",
			__func__, LED_GPIO_PDM);
	else
		platform_device_register(&led_pdev);

#ifdef CONFIG_MSM_RPC_VIBRATOR
	if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
		msm_init_pmic_vibrator();
#endif
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
}

static void __init msm7x2x_init_early(void)
{
	msm_msm7627a_allocate_memory_regions();
}

MACHINE_START(MSM7X27A_RUMI3, "QCT MSM7x27a RUMI3")
	.boot_params	= PHYS_OFFSET + 0x100,
	.map_io		= msm_common_io_init,
	.reserve	= msm7x27a_reserve,
	.init_irq	= msm_init_irq,
	.init_machine	= msm7627a_rumi3_init,
	.timer		= &msm_timer,
	.init_early     = msm7x2x_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END
MACHINE_START(MSM7X27A_SURF, "QCT MSM7x27a SURF")
	.boot_params	= PHYS_OFFSET + 0x100,
	.map_io		= msm_common_io_init,
	.reserve	= msm7x27a_reserve,
	.init_irq	= msm_init_irq,
	.init_machine	= msm7x2x_init,
	.timer		= &msm_timer,
	.init_early     = msm7x2x_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END
MACHINE_START(MSM7X27A_FFA, "QCT MSM7x27a FFA")
	.boot_params	= PHYS_OFFSET + 0x100,
	.map_io		= msm_common_io_init,
	.reserve	= msm7x27a_reserve,
	.init_irq	= msm_init_irq,
	.init_machine	= msm7x2x_init,
	.timer		= &msm_timer,
	.init_early     = msm7x2x_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END
MACHINE_START(MSM7625A_SURF, "QCT MSM7625a SURF")
	.boot_params    = PHYS_OFFSET + 0x100,
	.map_io         = msm_common_io_init,
	.reserve        = msm7x27a_reserve,
	.init_irq       = msm_init_irq,
	.init_machine   = msm7x2x_init,
	.timer          = &msm_timer,
	.init_early     = msm7x2x_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END
MACHINE_START(MSM7625A_FFA, "QCT MSM7625a FFA")
	.boot_params    = PHYS_OFFSET + 0x100,
	.map_io         = msm_common_io_init,
	.reserve        = msm7x27a_reserve,
	.init_irq       = msm_init_irq,
	.init_machine   = msm7x2x_init,
	.timer          = &msm_timer,
	.init_early     = msm7x2x_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END
MACHINE_START(MSM8625_RUMI3, "QCT MSM8625 RUMI3")
	.boot_params    = PHYS_OFFSET + 0x100,
	.map_io         = msm8625_map_io,
	.reserve        = msm8625_reserve,
	.init_irq       = msm8625_init_irq,
	.init_machine   = msm8625_rumi3_init,
	.timer          = &msm_timer,
	.handle_irq	= gic_handle_irq,
MACHINE_END