ALSA: usb-audio: increase control transfer timeout
There are certain devices that are reportedly so slow that they need
more than 100 ms to handle control transfers. Therefore, increase the
timeout in mixer(_quirks).c to 1000 ms.
The timeout parameter of snd_usb_ctl_msg() is now constant, so we can
drop it.
Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 075195e..379baad 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -91,7 +91,7 @@
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
UAC2_CX_CLOCK_SELECTOR << 8,
snd_usb_ctrl_intf(chip) | (selector_id << 8),
- &buf, sizeof(buf), 1000);
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
@@ -118,7 +118,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_CLOCK_VALID << 8,
snd_usb_ctrl_intf(chip) | (source_id << 8),
- &data, sizeof(data), 1000);
+ &data, sizeof(data));
if (err < 0) {
snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
@@ -222,7 +222,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
@@ -231,7 +231,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
@@ -273,7 +273,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
dev->devnum, iface, fmt->altsetting, rate);
return err;
@@ -283,7 +283,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
return err;
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 8d042dc..89421d1 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -286,7 +286,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- tmp, sizeof(tmp), 1000);
+ tmp, sizeof(tmp));
if (ret < 0) {
snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
@@ -307,7 +307,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, data_size, 1000);
+ data, data_size);
if (ret < 0) {
snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
diff --git a/sound/usb/helper.c b/sound/usb/helper.c
index f280c19..9eed8f4 100644
--- a/sound/usb/helper.c
+++ b/sound/usb/helper.c
@@ -81,7 +81,7 @@
*/
int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
__u8 requesttype, __u16 value, __u16 index, void *data,
- __u16 size, int timeout)
+ __u16 size)
{
int err;
void *buf = NULL;
@@ -92,7 +92,7 @@
return -ENOMEM;
}
err = usb_control_msg(dev, pipe, request, requesttype,
- value, index, buf, size, timeout);
+ value, index, buf, size, 1000);
if (size > 0) {
memcpy(data, buf, size);
kfree(buf);
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index 09bd943..805c300 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -8,7 +8,7 @@
int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
- void *data, __u16 size, int timeout);
+ void *data, __u16 size);
unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
struct usb_host_interface *alts);
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 78a5abd..b13b7ac 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -296,7 +296,7 @@
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= val_len) {
+ buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
snd_usb_autosuspend(cval->mixer->chip);
return 0;
@@ -333,7 +333,7 @@
ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size, 1000);
+ buf, size);
snd_usb_autosuspend(chip);
if (ret < 0) {
@@ -445,7 +445,7 @@
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= 0) {
+ buf, val_len) >= 0) {
snd_usb_autosuspend(chip);
return 0;
}
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 3d0f487..ab125ee 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -190,18 +190,18 @@
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- !value, 0, NULL, 0, 100);
+ !value, 0, NULL, 0);
/* USB X-Fi S51 Pro */
if (mixer->chip->usb_id == USB_ID(0x041e, 0x30df))
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- !value, 0, NULL, 0, 100);
+ !value, 0, NULL, 0);
else
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- value, index + 2, NULL, 0, 100);
+ value, index + 2, NULL, 0);
if (err < 0)
return err;
mixer->audigy2nx_leds[index] = value;
@@ -299,7 +299,7 @@
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
- jacks[i].unitid << 8, buf, 3, 100);
+ jacks[i].unitid << 8, buf, 3);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
@@ -332,7 +332,7 @@
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 50, 0, &new_status, 1, 100);
+ 50, 0, &new_status, 1);
if (err < 0)
return err;
mixer->xonar_u1_status = new_status;
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index b5bc870..0220b0f 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -152,7 +152,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
dev->devnum, iface, ep);
return err;
@@ -176,7 +176,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC2_EP_CS_PITCH << 8, 0,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
dev->devnum, iface, fmt->altsetting);
return err;
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 556edea..2e5bc73 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -340,7 +340,7 @@
snd_printdd("sending Extigy boot sequence...\n");
/* Send message to force it to reconnect with full interface. */
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
- 0x10, 0x43, 0x0001, 0x000a, NULL, 0, 1000);
+ 0x10, 0x43, 0x0001, 0x000a, NULL, 0);
if (err < 0) snd_printdd("error sending boot message: %d\n", err);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
&dev->descriptor, sizeof(dev->descriptor));
@@ -361,11 +361,11 @@
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 0, 0, &buf, 1, 1000);
+ 0, 0, &buf, 1);
if (buf == 0) {
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 1, 2000, NULL, 0, 1000);
+ 1, 2000, NULL, 0);
return -ENODEV;
}
return 0;
@@ -408,7 +408,7 @@
buf[3] = reg;
return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
- 0, 0, &buf, 4, 1000);
+ 0, 0, &buf, 4);
}
static int snd_usb_cm106_boot_quirk(struct usb_device *dev)