ARM: S5P6440: Add Clock and PLL support
This patch adds clock and pll support for S5P6440. This patch are based on
Harald Welte's patches and Ben's plat-samsung.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
new file mode 100644
index 0000000..3d3c0f1
--- /dev/null
+++ b/arch/arm/plat-s5p/clock.c
@@ -0,0 +1,136 @@
+/* linux/arch/arm/plat-s5p/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+ .name = "fout_mpll",
+ .id = -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
+/* ARM clock */
+struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .rate = 0,
+ .ctrlbit = 0,
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+ con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static struct clk *s5p_clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_48m,
+ &clk_fout_apll,
+ &clk_fout_mpll,
+ &clk_fout_epll,
+ &clk_arm,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+ int ret;
+
+ clk_ext_xtal_mux.rate = xtal_freq;
+
+ ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register s5p clocks\n");
+}