drivers/ata/pata_cs5535.c - fp2-dev/kernel/msm - Gitiles

 /*
  * pata-cs5535.c 	- CS5535 PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
  *			  Alan Cox <alan@redhat.com>
  *
  * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
  * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
  * and Alexander Kiausch <alex.kiausch@t-online.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  * Loosely based on the piix & svwks drivers.
  *
  * Documentation:
  *	Available from AMD web site.
  * TODO
  *	Review errata to see if serializing is neccessary
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 #include <asm/msr.h>

 #define DRV_NAME	"cs5535"
 #define DRV_VERSION	"0.2.11"

 /*
  *	The Geode (Aka Athlon GX now) uses an internal MSR based
  *	bus system for control. Demented but there you go.
  */

 #define MSR_ATAC_BASE    	0x51300000
 #define ATAC_GLD_MSR_CAP 	(MSR_ATAC_BASE+0)
 #define ATAC_GLD_MSR_CONFIG    (MSR_ATAC_BASE+0x01)
 #define ATAC_GLD_MSR_SMI       (MSR_ATAC_BASE+0x02)
 #define ATAC_GLD_MSR_ERROR     (MSR_ATAC_BASE+0x03)
 #define ATAC_GLD_MSR_PM        (MSR_ATAC_BASE+0x04)
 #define ATAC_GLD_MSR_DIAG      (MSR_ATAC_BASE+0x05)
 #define ATAC_IO_BAR            (MSR_ATAC_BASE+0x08)
 #define ATAC_RESET             (MSR_ATAC_BASE+0x10)
 #define ATAC_CH0D0_PIO         (MSR_ATAC_BASE+0x20)
 #define ATAC_CH0D0_DMA         (MSR_ATAC_BASE+0x21)
 #define ATAC_CH0D1_PIO         (MSR_ATAC_BASE+0x22)
 #define ATAC_CH0D1_DMA         (MSR_ATAC_BASE+0x23)
 #define ATAC_PCI_ABRTERR       (MSR_ATAC_BASE+0x24)

 #define ATAC_BM0_CMD_PRIM      0x00
 #define ATAC_BM0_STS_PRIM      0x02
 #define ATAC_BM0_PRD           0x04

 #define CS5535_CABLE_DETECT    0x48

 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )

 /**
  *	cs5535_pre_reset	-	detect cable type
  *	@ap: Port to detect on
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
  */

 static int cs5535_pre_reset(struct ata_port *ap)
 {
 	u8 cable;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

 	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
 	if (cable & 1)
 		ap->cbl = ATA_CBL_PATA80;
 	else
 		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }

 /**
  *	cs5535_error_handler		-	reset/probe
  *	@ap: Port to reset
  *
  *	Reset and configure a port
  */

 static void cs5535_error_handler(struct ata_port *ap)
 {
 	ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }

 /**
  *	cs5535_set_piomode		-	PIO setup
  *	@ap: ATA interface
  *	@adev: device on the interface
  *
  *	Set our PIO requirements. The CS5535 is pretty clean about all this
  */

 static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	static const u16 pio_timings[5] = {
 		0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
 	};
 	static const u16 pio_cmd_timings[5] = {
 		0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
 	};
 	u32 reg, dummy;
 	struct ata_device *pair = ata_dev_pair(adev);

 	int mode = adev->pio_mode - XFER_PIO_0;
 	int cmdmode = mode;

 	/* Command timing has to be for the lowest of the pair of devices */
 	if (pair) {
 		int pairmode = pair->pio_mode - XFER_PIO_0;
 		cmdmode = min(mode, pairmode);
 		/* Write the other drive timing register if it changed */
 		if (cmdmode < pairmode)
 			wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
 				pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
 	}
 	/* Write the drive timing register */
 	wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
 		pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);

 	/* Set the PIO "format 1" bit in the DMA timing register */
 	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
 }

 /**
  *	cs5535_set_dmamode		-	DMA timing setup
  *	@ap: ATA interface
  *	@adev: Device being configured
  *
  */

 static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
 	static const u32 udma_timings[5] = {
 		0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
 	};
 	static const u32 mwdma_timings[3] = {
 		0x7F0FFFF3, 0x7F035352, 0x7F024241
 	};
 	u32 reg, dummy;
 	int mode = adev->dma_mode;

 	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 	reg &= 0x80000000UL;
 	if (mode >= XFER_UDMA_0)
 		reg |= udma_timings[mode - XFER_UDMA_0];
 	else
 		reg |= mwdma_timings[mode - XFER_MW_DMA_0];
 	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
 }

 static struct scsi_host_template cs5535_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.ioctl			= ata_scsi_ioctl,
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
 };

 static struct ata_port_operations cs5535_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= cs5535_set_piomode,
 	.set_dmamode	= cs5535_set_dmamode,
 	.mode_filter	= ata_pci_default_filter,

 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,

 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= cs5535_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,

 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
 	.bmdma_stop	= ata_bmdma_stop,
 	.bmdma_status 	= ata_bmdma_status,

 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,

 	.data_xfer	= ata_pio_data_xfer,

 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,

 	.port_start	= ata_port_start,
 };

 /**
  *	cs5535_init_one		-	Initialise a CS5530
  *	@dev: PCI device
  *	@id: Entry in match table
  *
  *	Install a driver for the newly found CS5530 companion chip. Most of
  *	this is just housekeeping. We have to set the chip up correctly and
  *	turn off various bits of emulation magic.
  */

 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static struct ata_port_info info = {
 		.sht = &cs5535_sht,
 		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x1f,
 		.port_ops = &cs5535_port_ops
 	};
 	struct ata_port_info *ports[1] = { &info };

 	u32 timings, dummy;

 	/* Check the BIOS set the initial timing clock. If not set the
 	   timings for PIO0 */
 	rdmsr(ATAC_CH0D0_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
 	return ata_pci_init_one(dev, ports, 1);
 }

 static const struct pci_device_id cs5535[] = {
 	{ PCI_VDEVICE(NS, 0x002D), },

 	{ },
 };

 static struct pci_driver cs5535_pci_driver = {
 	.name		= DRV_NAME,
 	.id_table	= cs5535,
 	.probe 		= cs5535_init_one,
 	.remove		= ata_pci_remove_one,
 	.suspend	= ata_pci_device_suspend,
 	.resume		= ata_pci_device_resume,
 };

 static int __init cs5535_init(void)
 {
 	return pci_register_driver(&cs5535_pci_driver);
 }

 static void __exit cs5535_exit(void)
 {
 	pci_unregister_driver(&cs5535_pci_driver);
 }

 MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
 MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5535);
 MODULE_VERSION(DRV_VERSION);

 module_init(cs5535_init);
 module_exit(cs5535_exit);
	/*
	* pata-cs5535.c - CS5535 PATA for new ATA layer
	* (C) 2005-2006 Red Hat Inc
	* Alan Cox <alan@redhat.com>
	*
	* based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
	* made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
	* and Alexander Kiausch <alex.kiausch@t-online.de>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	* Loosely based on the piix & svwks drivers.
	*
	* Documentation:
	* Available from AMD web site.
	* TODO
	* Review errata to see if serializing is neccessary
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/blkdev.h>
	#include <linux/delay.h>
	#include <scsi/scsi_host.h>
	#include <linux/libata.h>
	#include <asm/msr.h>

	#define DRV_NAME "cs5535"
	#define DRV_VERSION "0.2.11"

	/*
	* The Geode (Aka Athlon GX now) uses an internal MSR based
	* bus system for control. Demented but there you go.
	*/

	#define MSR_ATAC_BASE 0x51300000
	#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
	#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
	#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
	#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
	#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
	#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
	#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
	#define ATAC_RESET (MSR_ATAC_BASE+0x10)
	#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
	#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
	#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
	#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
	#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)

	#define ATAC_BM0_CMD_PRIM 0x00
	#define ATAC_BM0_STS_PRIM 0x02
	#define ATAC_BM0_PRD 0x04

	#define CS5535_CABLE_DETECT 0x48

	#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )

	/**
	* cs5535_pre_reset - detect cable type
	* @ap: Port to detect on
	*
	* Perform cable detection for ATA66 capable cable. Return a libata
	* cable type.
	*/

	static int cs5535_pre_reset(struct ata_port *ap)
	{
	u8 cable;
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
	if (cable & 1)
	ap->cbl = ATA_CBL_PATA80;
	else
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
	}

	/**
	* cs5535_error_handler - reset/probe
	* @ap: Port to reset
	*
	* Reset and configure a port
	*/

	static void cs5535_error_handler(struct ata_port *ap)
	{
	ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
	}

	/**
	* cs5535_set_piomode - PIO setup
	* @ap: ATA interface
	* @adev: device on the interface
	*
	* Set our PIO requirements. The CS5535 is pretty clean about all this
	*/

	static void cs5535_set_piomode(struct ata_port ap, struct ata_device adev)
	{
	static const u16 pio_timings[5] = {
	0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
	};
	static const u16 pio_cmd_timings[5] = {
	0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
	};
	u32 reg, dummy;
	struct ata_device *pair = ata_dev_pair(adev);

	int mode = adev->pio_mode - XFER_PIO_0;
	int cmdmode = mode;

	/* Command timing has to be for the lowest of the pair of devices */
	if (pair) {
	int pairmode = pair->pio_mode - XFER_PIO_0;
	cmdmode = min(mode, pairmode);
	/* Write the other drive timing register if it changed */
	if (cmdmode < pairmode)
	wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
	pio_cmd_timings[cmdmode] << 16 \| pio_timings[pairmode], 0);
	}
	/* Write the drive timing register */
	wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
	pio_cmd_timings[cmdmode] << 16 \| pio_timings[mode], 0);

	/* Set the PIO "format 1" bit in the DMA timing register */
	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg \| 0x80000000UL, 0);
	}

	/**
	* cs5535_set_dmamode - DMA timing setup
	* @ap: ATA interface
	* @adev: Device being configured
	*
	*/

	static void cs5535_set_dmamode(struct ata_port ap, struct ata_device adev)
	{
	static const u32 udma_timings[5] = {
	0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
	};
	static const u32 mwdma_timings[3] = {
	0x7F0FFFF3, 0x7F035352, 0x7F024241
	};
	u32 reg, dummy;
	int mode = adev->dma_mode;

	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
	reg &= 0x80000000UL;
	if (mode >= XFER_UDMA_0)
	reg \|= udma_timings[mode - XFER_UDMA_0];
	else
	reg \|= mwdma_timings[mode - XFER_MW_DMA_0];
	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
	}

	static struct scsi_host_template cs5535_sht = {
	.module = THIS_MODULE,
	.name = DRV_NAME,
	.ioctl = ata_scsi_ioctl,
	.queuecommand = ata_scsi_queuecmd,
	.can_queue = ATA_DEF_QUEUE,
	.this_id = ATA_SHT_THIS_ID,
	.sg_tablesize = LIBATA_MAX_PRD,
	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
	.emulated = ATA_SHT_EMULATED,
	.use_clustering = ATA_SHT_USE_CLUSTERING,
	.proc_name = DRV_NAME,
	.dma_boundary = ATA_DMA_BOUNDARY,
	.slave_configure = ata_scsi_slave_config,
	.slave_destroy = ata_scsi_slave_destroy,
	.bios_param = ata_std_bios_param,
	.resume = ata_scsi_device_resume,
	.suspend = ata_scsi_device_suspend,
	};

	static struct ata_port_operations cs5535_port_ops = {
	.port_disable = ata_port_disable,
	.set_piomode = cs5535_set_piomode,
	.set_dmamode = cs5535_set_dmamode,
	.mode_filter = ata_pci_default_filter,

	.tf_load = ata_tf_load,
	.tf_read = ata_tf_read,
	.check_status = ata_check_status,
	.exec_command = ata_exec_command,
	.dev_select = ata_std_dev_select,

	.freeze = ata_bmdma_freeze,
	.thaw = ata_bmdma_thaw,
	.error_handler = cs5535_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.bmdma_setup = ata_bmdma_setup,
	.bmdma_start = ata_bmdma_start,
	.bmdma_stop = ata_bmdma_stop,
	.bmdma_status = ata_bmdma_status,

	.qc_prep = ata_qc_prep,
	.qc_issue = ata_qc_issue_prot,

	.data_xfer = ata_pio_data_xfer,

	.irq_handler = ata_interrupt,
	.irq_clear = ata_bmdma_irq_clear,

	.port_start = ata_port_start,
	};

	/**
	* cs5535_init_one - Initialise a CS5530
	* @dev: PCI device
	* @id: Entry in match table
	*
	* Install a driver for the newly found CS5530 companion chip. Most of
	* this is just housekeeping. We have to set the chip up correctly and
	* turn off various bits of emulation magic.
	*/

	static int cs5535_init_one(struct pci_dev dev, const struct pci_device_id id)
	{
	static struct ata_port_info info = {
	.sht = &cs5535_sht,
	.flags = ATA_FLAG_SLAVE_POSS\|ATA_FLAG_SRST,
	.pio_mask = 0x1f,
	.mwdma_mask = 0x07,
	.udma_mask = 0x1f,
	.port_ops = &cs5535_port_ops
	};
	struct ata_port_info *ports[1] = { &info };

	u32 timings, dummy;

	/* Check the BIOS set the initial timing clock. If not set the
	timings for PIO0 */
	rdmsr(ATAC_CH0D0_PIO, timings, dummy);
	if (CS5535_BAD_PIO(timings))
	wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
	if (CS5535_BAD_PIO(timings))
	wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
	return ata_pci_init_one(dev, ports, 1);
	}

	static const struct pci_device_id cs5535[] = {
	{ PCI_VDEVICE(NS, 0x002D), },

	{ },
	};

	static struct pci_driver cs5535_pci_driver = {
	.name = DRV_NAME,
	.id_table = cs5535,
	.probe = cs5535_init_one,
	.remove = ata_pci_remove_one,
	.suspend = ata_pci_device_suspend,
	.resume = ata_pci_device_resume,
	};

	static int __init cs5535_init(void)
	{
	return pci_register_driver(&cs5535_pci_driver);
	}

	static void __exit cs5535_exit(void)
	{
	pci_unregister_driver(&cs5535_pci_driver);
	}

	MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
	MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
	MODULE_LICENSE("GPL");
	MODULE_DEVICE_TABLE(pci, cs5535);
	MODULE_VERSION(DRV_VERSION);

	module_init(cs5535_init);
	module_exit(cs5535_exit);