| /* |
| * This file is part of wl1251 |
| * |
| * Copyright (c) 1998-2007 Texas Instruments Incorporated |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * Contact: Kalle Valo <kalle.valo@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include "wl1251.h" |
| #include "wl1251_reg.h" |
| #include "wl1251_tx.h" |
| #include "wl1251_ps.h" |
| #include "wl1251_io.h" |
| |
| static bool wl1251_tx_double_buffer_busy(struct wl1251 *wl, u32 data_out_count) |
| { |
| int used, data_in_count; |
| |
| data_in_count = wl->data_in_count; |
| |
| if (data_in_count < data_out_count) |
| /* data_in_count has wrapped */ |
| data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1; |
| |
| used = data_in_count - data_out_count; |
| |
| WARN_ON(used < 0); |
| WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM); |
| |
| if (used >= DP_TX_PACKET_RING_CHUNK_NUM) |
| return true; |
| else |
| return false; |
| } |
| |
| static int wl1251_tx_path_status(struct wl1251 *wl) |
| { |
| u32 status, addr, data_out_count; |
| bool busy; |
| |
| addr = wl->data_path->tx_control_addr; |
| status = wl1251_mem_read32(wl, addr); |
| data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK; |
| busy = wl1251_tx_double_buffer_busy(wl, data_out_count); |
| |
| if (busy) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static int wl1251_tx_id(struct wl1251 *wl, struct sk_buff *skb) |
| { |
| int i; |
| |
| for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) |
| if (wl->tx_frames[i] == NULL) { |
| wl->tx_frames[i] = skb; |
| return i; |
| } |
| |
| return -EBUSY; |
| } |
| |
| static void wl1251_tx_control(struct tx_double_buffer_desc *tx_hdr, |
| struct ieee80211_tx_info *control, u16 fc) |
| { |
| *(u16 *)&tx_hdr->control = 0; |
| |
| tx_hdr->control.rate_policy = 0; |
| |
| /* 802.11 packets */ |
| tx_hdr->control.packet_type = 0; |
| |
| if (control->flags & IEEE80211_TX_CTL_NO_ACK) |
| tx_hdr->control.ack_policy = 1; |
| |
| tx_hdr->control.tx_complete = 1; |
| |
| if ((fc & IEEE80211_FTYPE_DATA) && |
| ((fc & IEEE80211_STYPE_QOS_DATA) || |
| (fc & IEEE80211_STYPE_QOS_NULLFUNC))) |
| tx_hdr->control.qos = 1; |
| } |
| |
| /* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */ |
| #define MAX_MSDU_SECURITY_LENGTH 16 |
| #define MAX_MPDU_SECURITY_LENGTH 16 |
| #define WLAN_QOS_HDR_LEN 26 |
| #define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \ |
| WLAN_QOS_HDR_LEN) |
| #define HW_BLOCK_SIZE 252 |
| static void wl1251_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr) |
| { |
| u16 payload_len, frag_threshold, mem_blocks; |
| u16 num_mpdus, mem_blocks_per_frag; |
| |
| frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD; |
| tx_hdr->frag_threshold = cpu_to_le16(frag_threshold); |
| |
| payload_len = le16_to_cpu(tx_hdr->length) + MAX_MSDU_SECURITY_LENGTH; |
| |
| if (payload_len > frag_threshold) { |
| mem_blocks_per_frag = |
| ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) / |
| HW_BLOCK_SIZE) + 1; |
| num_mpdus = payload_len / frag_threshold; |
| mem_blocks = num_mpdus * mem_blocks_per_frag; |
| payload_len -= num_mpdus * frag_threshold; |
| num_mpdus++; |
| |
| } else { |
| mem_blocks_per_frag = 0; |
| mem_blocks = 0; |
| num_mpdus = 1; |
| } |
| |
| mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1; |
| |
| if (num_mpdus > 1) |
| mem_blocks += min(num_mpdus, mem_blocks_per_frag); |
| |
| tx_hdr->num_mem_blocks = mem_blocks; |
| } |
| |
| static int wl1251_tx_fill_hdr(struct wl1251 *wl, struct sk_buff *skb, |
| struct ieee80211_tx_info *control) |
| { |
| struct tx_double_buffer_desc *tx_hdr; |
| struct ieee80211_rate *rate; |
| int id; |
| u16 fc; |
| |
| if (!skb) |
| return -EINVAL; |
| |
| id = wl1251_tx_id(wl, skb); |
| if (id < 0) |
| return id; |
| |
| fc = *(u16 *)skb->data; |
| tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb, |
| sizeof(*tx_hdr)); |
| |
| tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr)); |
| rate = ieee80211_get_tx_rate(wl->hw, control); |
| tx_hdr->rate = cpu_to_le16(rate->hw_value); |
| tx_hdr->expiry_time = cpu_to_le32(1 << 16); |
| tx_hdr->id = id; |
| |
| tx_hdr->xmit_queue = wl1251_tx_get_queue(skb_get_queue_mapping(skb)); |
| |
| wl1251_tx_control(tx_hdr, control, fc); |
| wl1251_tx_frag_block_num(tx_hdr); |
| |
| return 0; |
| } |
| |
| /* We copy the packet to the target */ |
| static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb, |
| struct ieee80211_tx_info *control) |
| { |
| struct tx_double_buffer_desc *tx_hdr; |
| int len; |
| u32 addr; |
| |
| if (!skb) |
| return -EINVAL; |
| |
| tx_hdr = (struct tx_double_buffer_desc *) skb->data; |
| |
| if (control->control.hw_key && |
| control->control.hw_key->alg == ALG_TKIP) { |
| int hdrlen; |
| __le16 fc; |
| u16 length; |
| u8 *pos; |
| |
| fc = *(__le16 *)(skb->data + sizeof(*tx_hdr)); |
| length = le16_to_cpu(tx_hdr->length) + WL1251_TKIP_IV_SPACE; |
| tx_hdr->length = cpu_to_le16(length); |
| |
| hdrlen = ieee80211_hdrlen(fc); |
| |
| pos = skb_push(skb, WL1251_TKIP_IV_SPACE); |
| memmove(pos, pos + WL1251_TKIP_IV_SPACE, |
| sizeof(*tx_hdr) + hdrlen); |
| } |
| |
| /* Revisit. This is a workaround for getting non-aligned packets. |
| This happens at least with EAPOL packets from the user space. |
| Our DMA requires packets to be aligned on a 4-byte boundary. |
| */ |
| if (unlikely((long)skb->data & 0x03)) { |
| int offset = (4 - (long)skb->data) & 0x03; |
| wl1251_debug(DEBUG_TX, "skb offset %d", offset); |
| |
| /* check whether the current skb can be used */ |
| if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) { |
| unsigned char *src = skb->data; |
| |
| /* align the buffer on a 4-byte boundary */ |
| skb_reserve(skb, offset); |
| memmove(skb->data, src, skb->len); |
| tx_hdr = (struct tx_double_buffer_desc *) skb->data; |
| } else { |
| wl1251_info("No handler, fixme!"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Our skb->data at this point includes the HW header */ |
| len = WL1251_TX_ALIGN(skb->len); |
| |
| if (wl->data_in_count & 0x1) |
| addr = wl->data_path->tx_packet_ring_addr + |
| wl->data_path->tx_packet_ring_chunk_size; |
| else |
| addr = wl->data_path->tx_packet_ring_addr; |
| |
| wl1251_mem_write(wl, addr, skb->data, len); |
| |
| wl1251_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x " |
| "queue %d", tx_hdr->id, skb, tx_hdr->length, |
| tx_hdr->rate, tx_hdr->xmit_queue); |
| |
| return 0; |
| } |
| |
| static void wl1251_tx_trigger(struct wl1251 *wl) |
| { |
| u32 data, addr; |
| |
| if (wl->data_in_count & 0x1) { |
| addr = ACX_REG_INTERRUPT_TRIG_H; |
| data = INTR_TRIG_TX_PROC1; |
| } else { |
| addr = ACX_REG_INTERRUPT_TRIG; |
| data = INTR_TRIG_TX_PROC0; |
| } |
| |
| wl1251_reg_write32(wl, addr, data); |
| |
| /* Bumping data in */ |
| wl->data_in_count = (wl->data_in_count + 1) & |
| TX_STATUS_DATA_OUT_COUNT_MASK; |
| } |
| |
| /* caller must hold wl->mutex */ |
| static int wl1251_tx_frame(struct wl1251 *wl, struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info; |
| int ret = 0; |
| u8 idx; |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| if (info->control.hw_key) { |
| idx = info->control.hw_key->hw_key_idx; |
| if (unlikely(wl->default_key != idx)) { |
| ret = wl1251_acx_default_key(wl, idx); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| ret = wl1251_tx_path_status(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_tx_fill_hdr(wl, skb, info); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_tx_send_packet(wl, skb, info); |
| if (ret < 0) |
| return ret; |
| |
| wl1251_tx_trigger(wl); |
| |
| return ret; |
| } |
| |
| void wl1251_tx_work(struct work_struct *work) |
| { |
| struct wl1251 *wl = container_of(work, struct wl1251, tx_work); |
| struct sk_buff *skb; |
| bool woken_up = false; |
| int ret; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state == WL1251_STATE_OFF)) |
| goto out; |
| |
| while ((skb = skb_dequeue(&wl->tx_queue))) { |
| if (!woken_up) { |
| ret = wl1251_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| woken_up = true; |
| } |
| |
| ret = wl1251_tx_frame(wl, skb); |
| if (ret == -EBUSY) { |
| /* firmware buffer is full, stop queues */ |
| wl1251_debug(DEBUG_TX, "tx_work: fw buffer full, " |
| "stop queues"); |
| ieee80211_stop_queues(wl->hw); |
| wl->tx_queue_stopped = true; |
| skb_queue_head(&wl->tx_queue, skb); |
| goto out; |
| } else if (ret < 0) { |
| dev_kfree_skb(skb); |
| goto out; |
| } |
| } |
| |
| out: |
| if (woken_up) |
| wl1251_ps_elp_sleep(wl); |
| |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static const char *wl1251_tx_parse_status(u8 status) |
| { |
| /* 8 bit status field, one character per bit plus null */ |
| static char buf[9]; |
| int i = 0; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| if (status & TX_DMA_ERROR) |
| buf[i++] = 'm'; |
| if (status & TX_DISABLED) |
| buf[i++] = 'd'; |
| if (status & TX_RETRY_EXCEEDED) |
| buf[i++] = 'r'; |
| if (status & TX_TIMEOUT) |
| buf[i++] = 't'; |
| if (status & TX_KEY_NOT_FOUND) |
| buf[i++] = 'k'; |
| if (status & TX_ENCRYPT_FAIL) |
| buf[i++] = 'e'; |
| if (status & TX_UNAVAILABLE_PRIORITY) |
| buf[i++] = 'p'; |
| |
| /* bit 0 is unused apparently */ |
| |
| return buf; |
| } |
| |
| static void wl1251_tx_packet_cb(struct wl1251 *wl, |
| struct tx_result *result) |
| { |
| struct ieee80211_tx_info *info; |
| struct sk_buff *skb; |
| int hdrlen, ret; |
| u8 *frame; |
| |
| skb = wl->tx_frames[result->id]; |
| if (skb == NULL) { |
| wl1251_error("SKB for packet %d is NULL", result->id); |
| return; |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && |
| (result->status == TX_SUCCESS)) |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| |
| info->status.rates[0].count = result->ack_failures + 1; |
| wl->stats.retry_count += result->ack_failures; |
| |
| /* |
| * We have to remove our private TX header before pushing |
| * the skb back to mac80211. |
| */ |
| frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc)); |
| if (info->control.hw_key && |
| info->control.hw_key->alg == ALG_TKIP) { |
| hdrlen = ieee80211_get_hdrlen_from_skb(skb); |
| memmove(frame + WL1251_TKIP_IV_SPACE, frame, hdrlen); |
| skb_pull(skb, WL1251_TKIP_IV_SPACE); |
| } |
| |
| wl1251_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x" |
| " status 0x%x (%s)", |
| result->id, skb, result->ack_failures, result->rate, |
| result->status, wl1251_tx_parse_status(result->status)); |
| |
| |
| ieee80211_tx_status(wl->hw, skb); |
| |
| wl->tx_frames[result->id] = NULL; |
| |
| if (wl->tx_queue_stopped) { |
| wl1251_debug(DEBUG_TX, "cb: queue was stopped"); |
| |
| skb = skb_dequeue(&wl->tx_queue); |
| |
| /* The skb can be NULL because tx_work might have been |
| scheduled before the queue was stopped making the |
| queue empty */ |
| |
| if (skb) { |
| ret = wl1251_tx_frame(wl, skb); |
| if (ret == -EBUSY) { |
| /* firmware buffer is still full */ |
| wl1251_debug(DEBUG_TX, "cb: fw buffer " |
| "still full"); |
| skb_queue_head(&wl->tx_queue, skb); |
| return; |
| } else if (ret < 0) { |
| dev_kfree_skb(skb); |
| return; |
| } |
| } |
| |
| wl1251_debug(DEBUG_TX, "cb: waking queues"); |
| ieee80211_wake_queues(wl->hw); |
| wl->tx_queue_stopped = false; |
| } |
| } |
| |
| /* Called upon reception of a TX complete interrupt */ |
| void wl1251_tx_complete(struct wl1251 *wl) |
| { |
| int i, result_index, num_complete = 0; |
| struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr; |
| |
| if (unlikely(wl->state != WL1251_STATE_ON)) |
| return; |
| |
| /* First we read the result */ |
| wl1251_mem_read(wl, wl->data_path->tx_complete_addr, |
| result, sizeof(result)); |
| |
| result_index = wl->next_tx_complete; |
| |
| for (i = 0; i < ARRAY_SIZE(result); i++) { |
| result_ptr = &result[result_index]; |
| |
| if (result_ptr->done_1 == 1 && |
| result_ptr->done_2 == 1) { |
| wl1251_tx_packet_cb(wl, result_ptr); |
| |
| result_ptr->done_1 = 0; |
| result_ptr->done_2 = 0; |
| |
| result_index = (result_index + 1) & |
| (FW_TX_CMPLT_BLOCK_SIZE - 1); |
| num_complete++; |
| } else { |
| break; |
| } |
| } |
| |
| /* Every completed frame needs to be acknowledged */ |
| if (num_complete) { |
| /* |
| * If we've wrapped, we have to clear |
| * the results in 2 steps. |
| */ |
| if (result_index > wl->next_tx_complete) { |
| /* Only 1 write is needed */ |
| wl1251_mem_write(wl, |
| wl->data_path->tx_complete_addr + |
| (wl->next_tx_complete * |
| sizeof(struct tx_result)), |
| &result[wl->next_tx_complete], |
| num_complete * |
| sizeof(struct tx_result)); |
| |
| |
| } else if (result_index < wl->next_tx_complete) { |
| /* 2 writes are needed */ |
| wl1251_mem_write(wl, |
| wl->data_path->tx_complete_addr + |
| (wl->next_tx_complete * |
| sizeof(struct tx_result)), |
| &result[wl->next_tx_complete], |
| (FW_TX_CMPLT_BLOCK_SIZE - |
| wl->next_tx_complete) * |
| sizeof(struct tx_result)); |
| |
| wl1251_mem_write(wl, |
| wl->data_path->tx_complete_addr, |
| result, |
| (num_complete - |
| FW_TX_CMPLT_BLOCK_SIZE + |
| wl->next_tx_complete) * |
| sizeof(struct tx_result)); |
| |
| } else { |
| /* We have to write the whole array */ |
| wl1251_mem_write(wl, |
| wl->data_path->tx_complete_addr, |
| result, |
| FW_TX_CMPLT_BLOCK_SIZE * |
| sizeof(struct tx_result)); |
| } |
| |
| } |
| |
| wl->next_tx_complete = result_index; |
| } |
| |
| /* caller must hold wl->mutex */ |
| void wl1251_tx_flush(struct wl1251 *wl) |
| { |
| int i; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *info; |
| |
| /* TX failure */ |
| /* control->flags = 0; FIXME */ |
| |
| while ((skb = skb_dequeue(&wl->tx_queue))) { |
| info = IEEE80211_SKB_CB(skb); |
| |
| wl1251_debug(DEBUG_TX, "flushing skb 0x%p", skb); |
| |
| if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) |
| continue; |
| |
| ieee80211_tx_status(wl->hw, skb); |
| } |
| |
| for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) |
| if (wl->tx_frames[i] != NULL) { |
| skb = wl->tx_frames[i]; |
| info = IEEE80211_SKB_CB(skb); |
| |
| if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) |
| continue; |
| |
| ieee80211_tx_status(wl->hw, skb); |
| wl->tx_frames[i] = NULL; |
| } |
| } |