| /* |
| * Copyright (c) 2000-2009 LSI Corporation. |
| * |
| * |
| * Name: mpi2_init.h |
| * Title: MPI SCSI initiator mode messages and structures |
| * Creation Date: June 23, 2006 |
| * |
| * mpi2_init.h Version: 02.00.08 |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. |
| * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. |
| * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. |
| * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. |
| * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. |
| * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO |
| * Control field Task Attribute flags. |
| * Moved LUN field defines to mpi2.h becasue they are |
| * common to many structures. |
| * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to |
| * Query Asynchronous Event. |
| * Defined two new bits in the SlotStatus field of the SCSI |
| * Enclosure Processor Request and Reply. |
| * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for |
| * both SCSI IO Error Reply and SCSI Task Management Reply. |
| * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. |
| * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI2_INIT_H |
| #define MPI2_INIT_H |
| |
| /***************************************************************************** |
| * |
| * SCSI Initiator Messages |
| * |
| *****************************************************************************/ |
| |
| /**************************************************************************** |
| * SCSI IO messages and associated structures |
| ****************************************************************************/ |
| |
| typedef struct |
| { |
| U8 CDB[20]; /* 0x00 */ |
| U32 PrimaryReferenceTag; /* 0x14 */ |
| U16 PrimaryApplicationTag; /* 0x18 */ |
| U16 PrimaryApplicationTagMask; /* 0x1A */ |
| U32 TransferLength; /* 0x1C */ |
| } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, |
| Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; |
| |
| /* TBD: I don't think this is needed for MPI2/Gen2 */ |
| #if 0 |
| typedef struct |
| { |
| U8 CDB[16]; /* 0x00 */ |
| U32 DataLength; /* 0x10 */ |
| U32 PrimaryReferenceTag; /* 0x14 */ |
| U16 PrimaryApplicationTag; /* 0x18 */ |
| U16 PrimaryApplicationTagMask; /* 0x1A */ |
| U32 TransferLength; /* 0x1C */ |
| } MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, |
| Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; |
| #endif |
| |
| typedef union |
| { |
| U8 CDB32[32]; |
| MPI2_SCSI_IO_CDB_EEDP32 EEDP32; |
| MPI2_SGE_SIMPLE_UNION SGE; |
| } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, |
| Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; |
| |
| /* SCSI IO Request Message */ |
| typedef struct _MPI2_SCSI_IO_REQUEST |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 ChainOffset; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U16 Reserved1; /* 0x04 */ |
| U8 Reserved2; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved3; /* 0x0A */ |
| U32 SenseBufferLowAddress; /* 0x0C */ |
| U16 SGLFlags; /* 0x10 */ |
| U8 SenseBufferLength; /* 0x12 */ |
| U8 Reserved4; /* 0x13 */ |
| U8 SGLOffset0; /* 0x14 */ |
| U8 SGLOffset1; /* 0x15 */ |
| U8 SGLOffset2; /* 0x16 */ |
| U8 SGLOffset3; /* 0x17 */ |
| U32 SkipCount; /* 0x18 */ |
| U32 DataLength; /* 0x1C */ |
| U32 BidirectionalDataLength; /* 0x20 */ |
| U16 IoFlags; /* 0x24 */ |
| U16 EEDPFlags; /* 0x26 */ |
| U32 EEDPBlockSize; /* 0x28 */ |
| U32 SecondaryReferenceTag; /* 0x2C */ |
| U16 SecondaryApplicationTag; /* 0x30 */ |
| U16 ApplicationTagTranslationMask; /* 0x32 */ |
| U8 LUN[8]; /* 0x34 */ |
| U32 Control; /* 0x3C */ |
| MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ |
| MPI2_SGE_IO_UNION SGL; /* 0x60 */ |
| } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, |
| Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; |
| |
| /* SCSI IO MsgFlags bits */ |
| |
| /* MsgFlags for SenseBufferAddressSpace */ |
| #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) |
| #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) |
| #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) |
| #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) |
| #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) |
| |
| /* SCSI IO SGLFlags bits */ |
| |
| /* base values for Data Location Address Space */ |
| #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) |
| #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) |
| #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) |
| #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) |
| #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) |
| |
| /* base values for Type */ |
| #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) |
| #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) |
| #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) |
| #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) |
| |
| /* shift values for each sub-field */ |
| #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) |
| #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) |
| #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) |
| #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) |
| |
| /* SCSI IO IoFlags bits */ |
| |
| /* Large CDB Address Space */ |
| #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) |
| #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) |
| #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) |
| #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) |
| #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) |
| |
| #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) |
| #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) |
| #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) |
| #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) |
| #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) |
| |
| /* SCSI IO EEDPFlags bits */ |
| |
| #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) |
| #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) |
| #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) |
| #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) |
| |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) |
| |
| #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) |
| |
| #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) |
| #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) |
| #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) |
| #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) |
| #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) |
| #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) |
| |
| /* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ |
| |
| /* SCSI IO Control bits */ |
| #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) |
| #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) |
| |
| #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) |
| #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) |
| #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) |
| #define MPI2_SCSIIO_CONTROL_READ (0x02000000) |
| #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) |
| |
| #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) |
| #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) |
| |
| #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) |
| #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) |
| #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) |
| #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) |
| #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) |
| |
| #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) |
| #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) |
| #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) |
| #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) |
| |
| |
| /* SCSI IO Error Reply Message */ |
| typedef struct _MPI2_SCSI_IO_REPLY |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 MsgLength; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U16 Reserved1; /* 0x04 */ |
| U8 Reserved2; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved3; /* 0x0A */ |
| U8 SCSIStatus; /* 0x0C */ |
| U8 SCSIState; /* 0x0D */ |
| U16 IOCStatus; /* 0x0E */ |
| U32 IOCLogInfo; /* 0x10 */ |
| U32 TransferCount; /* 0x14 */ |
| U32 SenseCount; /* 0x18 */ |
| U32 ResponseInfo; /* 0x1C */ |
| U16 TaskTag; /* 0x20 */ |
| U16 Reserved4; /* 0x22 */ |
| U32 BidirectionalTransferCount; /* 0x24 */ |
| U32 Reserved5; /* 0x28 */ |
| U32 Reserved6; /* 0x2C */ |
| } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, |
| Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; |
| |
| /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ |
| |
| #define MPI2_SCSI_STATUS_GOOD (0x00) |
| #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) |
| #define MPI2_SCSI_STATUS_CONDITION_MET (0x04) |
| #define MPI2_SCSI_STATUS_BUSY (0x08) |
| #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) |
| #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) |
| #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) |
| #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ |
| #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) |
| #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) |
| #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) |
| |
| /* SCSI IO Reply SCSIState flags */ |
| |
| #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) |
| #define MPI2_SCSI_STATE_TERMINATED (0x08) |
| #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) |
| #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) |
| #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) |
| |
| /* masks and shifts for the ResponseInfo field */ |
| |
| #define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) |
| #define MPI2_SCSI_RI_SHIFT_REASONCODE (0) |
| |
| #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) |
| |
| |
| /**************************************************************************** |
| * SCSI Task Management messages |
| ****************************************************************************/ |
| |
| /* SCSI Task Management Request Message */ |
| typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 ChainOffset; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U8 Reserved1; /* 0x04 */ |
| U8 TaskType; /* 0x05 */ |
| U8 Reserved2; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved3; /* 0x0A */ |
| U8 LUN[8]; /* 0x0C */ |
| U32 Reserved4[7]; /* 0x14 */ |
| U16 TaskMID; /* 0x30 */ |
| U16 Reserved5; /* 0x32 */ |
| } MPI2_SCSI_TASK_MANAGE_REQUEST, |
| MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, |
| Mpi2SCSITaskManagementRequest_t, |
| MPI2_POINTER pMpi2SCSITaskManagementRequest_t; |
| |
| /* TaskType values */ |
| |
| #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) |
| #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) |
| |
| /* obsolete TaskType name */ |
| #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ |
| (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) |
| |
| /* MsgFlags bits */ |
| |
| #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) |
| #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) |
| #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) |
| #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) |
| |
| #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) |
| |
| |
| |
| /* SCSI Task Management Reply Message */ |
| typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 MsgLength; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U8 ResponseCode; /* 0x04 */ |
| U8 TaskType; /* 0x05 */ |
| U8 Reserved1; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved2; /* 0x0A */ |
| U16 Reserved3; /* 0x0C */ |
| U16 IOCStatus; /* 0x0E */ |
| U32 IOCLogInfo; /* 0x10 */ |
| U32 TerminationCount; /* 0x14 */ |
| U32 ResponseInfo; /* 0x18 */ |
| } MPI2_SCSI_TASK_MANAGE_REPLY, |
| MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, |
| Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; |
| |
| /* ResponseCode values */ |
| |
| #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) |
| #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) |
| #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) |
| #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) |
| #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) |
| #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) |
| #define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) |
| #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) |
| |
| /* masks and shifts for the ResponseInfo field */ |
| |
| #define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) |
| #define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) |
| #define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) |
| #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) |
| #define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) |
| #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) |
| #define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) |
| #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) |
| |
| |
| /**************************************************************************** |
| * SCSI Enclosure Processor messages |
| ****************************************************************************/ |
| |
| /* SCSI Enclosure Processor Request Message */ |
| typedef struct _MPI2_SEP_REQUEST |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 ChainOffset; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U8 Action; /* 0x04 */ |
| U8 Flags; /* 0x05 */ |
| U8 Reserved1; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved2; /* 0x0A */ |
| U32 SlotStatus; /* 0x0C */ |
| U32 Reserved3; /* 0x10 */ |
| U32 Reserved4; /* 0x14 */ |
| U32 Reserved5; /* 0x18 */ |
| U16 Slot; /* 0x1C */ |
| U16 EnclosureHandle; /* 0x1E */ |
| } MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, |
| Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; |
| |
| /* Action defines */ |
| #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) |
| #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) |
| |
| /* Flags defines */ |
| #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) |
| #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) |
| |
| /* SlotStatus defines */ |
| #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) |
| #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) |
| #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) |
| #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) |
| #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) |
| #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) |
| #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) |
| #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) |
| #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) |
| #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) |
| #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) |
| |
| |
| /* SCSI Enclosure Processor Reply Message */ |
| typedef struct _MPI2_SEP_REPLY |
| { |
| U16 DevHandle; /* 0x00 */ |
| U8 MsgLength; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U8 Action; /* 0x04 */ |
| U8 Flags; /* 0x05 */ |
| U8 Reserved1; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved2; /* 0x0A */ |
| U16 Reserved3; /* 0x0C */ |
| U16 IOCStatus; /* 0x0E */ |
| U32 IOCLogInfo; /* 0x10 */ |
| U32 SlotStatus; /* 0x14 */ |
| U32 Reserved4; /* 0x18 */ |
| U16 Slot; /* 0x1C */ |
| U16 EnclosureHandle; /* 0x1E */ |
| } MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, |
| Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; |
| |
| /* SlotStatus defines */ |
| #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) |
| #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) |
| |
| |
| #endif |
| |
| |