Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
new file mode 100644
index 0000000..17a0cbc
--- /dev/null
+++ b/arch/i386/Kconfig
@@ -0,0 +1,1269 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config X86
+ bool
+ default y
+ help
+ This is Linux's home port. Linux was originally native to the Intel
+ 386, and runs on all the later x86 processors including the Intel
+ 486, 586, Pentiums, and various instruction-set-compatible chips by
+ AMD, Cyrix, and others.
+
+config MMU
+ bool
+ default y
+
+config SBUS
+ bool
+
+config UID16
+ bool
+ default y
+
+config GENERIC_ISA_DMA
+ bool
+ default y
+
+config GENERIC_IOMAP
+ bool
+ default y
+
+source "init/Kconfig"
+
+menu "Processor type and features"
+
+choice
+ prompt "Subarchitecture Type"
+ default X86_PC
+
+config X86_PC
+ bool "PC-compatible"
+ help
+ Choose this option if your computer is a standard PC or compatible.
+
+config X86_ELAN
+ bool "AMD Elan"
+ help
+ Select this for an AMD Elan processor.
+
+ Do not use this option for K6/Athlon/Opteron processors!
+
+ If unsure, choose "PC-compatible" instead.
+
+config X86_VOYAGER
+ bool "Voyager (NCR)"
+ help
+ Voyager is an MCA-based 32-way capable SMP architecture proprietary
+ to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
+
+ *** WARNING ***
+
+ If you do not specifically know you have a Voyager based machine,
+ say N here, otherwise the kernel you build will not be bootable.
+
+config X86_NUMAQ
+ bool "NUMAQ (IBM/Sequent)"
+ select DISCONTIGMEM
+ select NUMA
+ help
+ This option is used for getting Linux to run on a (IBM/Sequent) NUMA
+ multiquad box. This changes the way that processors are bootstrapped,
+ and uses Clustered Logical APIC addressing mode instead of Flat Logical.
+ You will need a new lynxer.elf file to flash your firmware with - send
+ email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+ bool "Summit/EXA (IBM x440)"
+ depends on SMP
+ help
+ This option is needed for IBM systems that use the Summit/EXA chipset.
+ In particular, it is needed for the x440.
+
+ If you don't have one of these computers, you should say N here.
+
+config X86_BIGSMP
+ bool "Support for other sub-arch SMP systems with more than 8 CPUs"
+ depends on SMP
+ help
+ This option is needed for the systems that have more than 8 CPUs
+ and if the system is not of any sub-arch type above.
+
+ If you don't have such a system, you should say N here.
+
+config X86_VISWS
+ bool "SGI 320/540 (Visual Workstation)"
+ help
+ The SGI Visual Workstation series is an IA32-based workstation
+ based on SGI systems chips with some legacy PC hardware attached.
+
+ Say Y here to create a kernel to run on the SGI 320 or 540.
+
+ A kernel compiled for the Visual Workstation will not run on PCs
+ and vice versa. See <file:Documentation/sgi-visws.txt> for details.
+
+config X86_GENERICARCH
+ bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+ depends on SMP
+ help
+ This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
+ It is intended for a generic binary kernel.
+
+config X86_ES7000
+ bool "Support for Unisys ES7000 IA32 series"
+ depends on SMP
+ help
+ Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
+ supposed to run on an IA32-based Unisys ES7000 system.
+ Only choose this option if you have such a system, otherwise you
+ should say N here.
+
+endchoice
+
+config ACPI_SRAT
+ bool
+ default y
+ depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+
+config X86_SUMMIT_NUMA
+ bool
+ default y
+ depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+
+config X86_CYCLONE_TIMER
+ bool
+ default y
+ depends on X86_SUMMIT || X86_GENERICARCH
+
+config ES7000_CLUSTERED_APIC
+ bool
+ default y
+ depends on SMP && X86_ES7000 && MPENTIUMIII
+
+if !X86_ELAN
+
+choice
+ prompt "Processor family"
+ default M686
+
+config M386
+ bool "386"
+ ---help---
+ This is the processor type of your CPU. This information is used for
+ optimizing purposes. In order to compile a kernel that can run on
+ all x86 CPU types (albeit not optimally fast), you can specify
+ "386" here.
+
+ The kernel will not necessarily run on earlier architectures than
+ the one you have chosen, e.g. a Pentium optimized kernel will run on
+ a PPro, but not necessarily on a i486.
+
+ Here are the settings recommended for greatest speed:
+ - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+ 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
+ will run on a 386 class machine.
+ - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+ SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+ - "586" for generic Pentium CPUs lacking the TSC
+ (time stamp counter) register.
+ - "Pentium-Classic" for the Intel Pentium.
+ - "Pentium-MMX" for the Intel Pentium MMX.
+ - "Pentium-Pro" for the Intel Pentium Pro.
+ - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+ - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+ - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+ - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+ - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+ - "Crusoe" for the Transmeta Crusoe series.
+ - "Efficeon" for the Transmeta Efficeon series.
+ - "Winchip-C6" for original IDT Winchip.
+ - "Winchip-2" for IDT Winchip 2.
+ - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+ - "MediaGX/Geode" for Cyrix MediaGX aka Geode.
+ - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+ - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+ If you don't know what to do, choose "386".
+
+config M486
+ bool "486"
+ help
+ Select this for a 486 series processor, either Intel or one of the
+ compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
+ DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+ U5S.
+
+config M586
+ bool "586/K5/5x86/6x86/6x86MX"
+ help
+ Select this for an 586 or 686 series processor such as the AMD K5,
+ the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
+ assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+ bool "Pentium-Classic"
+ help
+ Select this for a Pentium Classic processor with the RDTSC (Read
+ Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+ bool "Pentium-MMX"
+ help
+ Select this for a Pentium with the MMX graphics/multimedia
+ extended instructions.
+
+config M686
+ bool "Pentium-Pro"
+ help
+ Select this for Intel Pentium Pro chips. This enables the use of
+ Pentium Pro extended instructions, and disables the init-time guard
+ against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+ bool "Pentium-II/Celeron(pre-Coppermine)"
+ help
+ Select this for Intel chips based on the Pentium-II and
+ pre-Coppermine Celeron core. This option enables an unaligned
+ copy optimization, compiles the kernel with optimization flags
+ tailored for the chip, and applies any applicable Pentium Pro
+ optimizations.
+
+config MPENTIUMIII
+ bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ help
+ Select this for Intel chips based on the Pentium-III and
+ Celeron-Coppermine core. This option enables use of some
+ extended prefetch instructions in addition to the Pentium II
+ extensions.
+
+config MPENTIUMM
+ bool "Pentium M"
+ help
+ Select this for Intel Pentium M (not Pentium-4 M)
+ notebook chips.
+
+config MPENTIUM4
+ bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ help
+ Select this for Intel Pentium 4 chips. This includes the
+ Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+ (not Pentium M) chips. This option enables compile flags
+ optimized for the chip, uses the correct cache shift, and
+ applies any applicable Pentium III optimizations.
+
+config MK6
+ bool "K6/K6-II/K6-III"
+ help
+ Select this for an AMD K6-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK7
+ bool "Athlon/Duron/K7"
+ help
+ Select this for an AMD Athlon K7-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK8
+ bool "Opteron/Athlon64/Hammer/K8"
+ help
+ Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables
+ use of some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MCRUSOE
+ bool "Crusoe"
+ help
+ Select this for a Transmeta Crusoe processor. Treats the processor
+ like a 586 with TSC, and sets some GCC optimization flags (like a
+ Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+ bool "Efficeon"
+ help
+ Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+ bool "Winchip-C6"
+ help
+ Select this for an IDT Winchip C6 chip. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP2
+ bool "Winchip-2"
+ help
+ Select this for an IDT Winchip-2. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP3D
+ bool "Winchip-2A/Winchip-3"
+ help
+ Select this for an IDT Winchip-2A or 3. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment reqirements. Also enable out of order memory
+ stores for this CPU, which can increase performance of some
+ operations.
+
+config MGEODE
+ bool "MediaGX/Geode"
+ help
+ Select this for a Cyrix MediaGX aka Geode chip. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment reqirements.
+
+config MCYRIXIII
+ bool "CyrixIII/VIA-C3"
+ help
+ Select this for a Cyrix III or C3 chip. Presently Linux and GCC
+ treat this chip as a generic 586. Whilst the CPU is 686 class,
+ it lacks the cmov extension which gcc assumes is present when
+ generating 686 code.
+ Note that Nehemiah (Model 9) and above will not boot with this
+ kernel due to them lacking the 3DNow! instructions used in earlier
+ incarnations of the CPU.
+
+config MVIAC3_2
+ bool "VIA C3-2 (Nehemiah)"
+ help
+ Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+ of SSE and tells gcc to treat the CPU as a 686.
+ Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+ bool "Generic x86 support"
+ help
+ Instead of just including optimizations for the selected
+ x86 variant (e.g. PII, Crusoe or Athlon), include some more
+ generic optimizations as well. This will make the kernel
+ perform better on x86 CPUs other than that selected.
+
+ This is really intended for distributors who need more
+ generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+ bool
+ depends on !M386
+ default y
+
+config X86_XADD
+ bool
+ depends on !M386
+ default y
+
+config X86_L1_CACHE_SHIFT
+ int
+ default "7" if MPENTIUM4 || X86_GENERIC
+ default "4" if X86_ELAN || M486 || M386
+ default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE
+ default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ depends on M386
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ depends on !M386
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config X86_PPRO_FENCE
+ bool
+ depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODE
+ default y
+
+config X86_F00F_BUG
+ bool
+ depends on M586MMX || M586TSC || M586 || M486 || M386
+ default y
+
+config X86_WP_WORKS_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_INVLPG
+ bool
+ depends on !M386
+ default y
+
+config X86_BSWAP
+ bool
+ depends on !M386
+ default y
+
+config X86_POPAD_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_ALIGNMENT_16
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODE
+ default y
+
+config X86_GOOD_APIC
+ bool
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+ default y
+
+config X86_INTEL_USERCOPY
+ bool
+ depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+ default y
+
+config X86_USE_PPRO_CHECKSUM
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+ default y
+
+config X86_USE_3DNOW
+ bool
+ depends on MCYRIXIII || MK7
+ default y
+
+config X86_OOSTORE
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MGEODE) && MTRR
+ default y
+
+config HPET_TIMER
+ bool "HPET Timer Support"
+ help
+ This enables the use of the HPET for the kernel's internal timer.
+ HPET is the next generation timer replacing legacy 8254s.
+ You can safely choose Y here. However, HPET will only be
+ activated if the platform and the BIOS support this feature.
+ Otherwise the 8254 will be used for timing services.
+
+ Choose N to continue using the legacy 8254 timer.
+
+config HPET_EMULATE_RTC
+ bool "Provide RTC interrupt"
+ depends on HPET_TIMER && RTC=y
+
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ Note that if you say Y here and choose architecture "586" or
+ "Pentium" under "Processor family", the kernel will not work on 486
+ architectures. Similarly, multiprocessor kernels for the "PPro"
+ architecture may not work on all Pentium based boards.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-255)"
+ range 2 255
+ depends on SMP
+ default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
+ default "8"
+ help
+ This allows you to specify the maximum number of CPUs which this
+ kernel will support. The maximum supported value is 255 and the
+ minimum value which makes sense is 2.
+
+ This is purely to save memory - each supported CPU adds
+ approximately eight kilobytes to the kernel image.
+
+config SCHED_SMT
+ bool "SMT (Hyperthreading) scheduler support"
+ depends on SMP
+ default off
+ help
+ SMT scheduler support improves the CPU scheduler's decision making
+ when dealing with Intel Pentium 4 chips with HyperThreading at a
+ cost of slightly increased overhead in some places. If unsure say
+ N here.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
+config X86_UP_APIC
+ bool "Local APIC support on uniprocessors"
+ depends on !SMP && !(X86_VISWS || X86_VOYAGER)
+ help
+ A local APIC (Advanced Programmable Interrupt Controller) is an
+ integrated interrupt controller in the CPU. If you have a single-CPU
+ system which has a processor with a local APIC, you can say Y here to
+ enable and use it. If you say Y here even though your machine doesn't
+ have a local APIC, then the kernel will still run with no slowdown at
+ all. The local APIC supports CPU-generated self-interrupts (timer,
+ performance counters), and the NMI watchdog which detects hard
+ lockups.
+
+config X86_UP_IOAPIC
+ bool "IO-APIC support on uniprocessors"
+ depends on X86_UP_APIC
+ help
+ An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
+ SMP-capable replacement for PC-style interrupt controllers. Most
+ SMP systems and many recent uniprocessor systems have one.
+
+ If you have a single-CPU system with an IO-APIC, you can say Y here
+ to use it. If you say Y here even though your machine doesn't have
+ an IO-APIC, then the kernel will still run with no slowdown at all.
+
+config X86_LOCAL_APIC
+ bool
+ depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER)
+ default y
+
+config X86_IO_APIC
+ bool
+ depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER))
+ default y
+
+config X86_VISWS_APIC
+ bool
+ depends on X86_VISWS
+ default y
+
+config X86_TSC
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODE) && !X86_NUMAQ
+ default y
+
+config X86_MCE
+ bool "Machine Check Exception"
+ depends on !X86_VOYAGER
+ ---help---
+ Machine Check Exception support allows the processor to notify the
+ kernel if it detects a problem (e.g. overheating, component failure).
+ The action the kernel takes depends on the severity of the problem,
+ ranging from a warning message on the console, to halting the machine.
+ Your processor must be a Pentium or newer to support this - check the
+ flags in /proc/cpuinfo for mce. Note that some older Pentium systems
+ have a design flaw which leads to false MCE events - hence MCE is
+ disabled on all P5 processors, unless explicitly enabled with "mce"
+ as a boot argument. Similarly, if MCE is built in and creates a
+ problem on some new non-standard machine, you can boot with "nomce"
+ to disable it. MCE support simply ignores non-MCE processors like
+ the 386 and 486, so nearly everyone can say Y here.
+
+config X86_MCE_NONFATAL
+ tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
+ depends on X86_MCE
+ help
+ Enabling this feature starts a timer that triggers every 5 seconds which
+ will look at the machine check registers to see if anything happened.
+ Non-fatal problems automatically get corrected (but still logged).
+ Disable this if you don't want to see these messages.
+ Seeing the messages this option prints out may be indicative of dying hardware,
+ or out-of-spec (ie, overclocked) hardware.
+ This option only does something on certain CPUs.
+ (AMD Athlon/Duron and Intel Pentium 4)
+
+config X86_MCE_P4THERMAL
+ bool "check for P4 thermal throttling interrupt."
+ depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+ help
+ Enabling this feature will cause a message to be printed when the P4
+ enters thermal throttling.
+
+config TOSHIBA
+ tristate "Toshiba Laptop support"
+ ---help---
+ This adds a driver to safely access the System Management Mode of
+ the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
+ not work on models with a Phoenix BIOS. The System Management Mode
+ is used to set the BIOS and power saving options on Toshiba portables.
+
+ For information on utilities to make use of this driver see the
+ Toshiba Linux utilities web site at:
+ <http://www.buzzard.org.uk/toshiba/>.
+
+ Say Y if you intend to run this kernel on a Toshiba portable.
+ Say N otherwise.
+
+config I8K
+ tristate "Dell laptop support"
+ ---help---
+ This adds a driver to safely access the System Management Mode
+ of the CPU on the Dell Inspiron 8000. The System Management Mode
+ is used to read cpu temperature and cooling fan status and to
+ control the fans on the I8K portables.
+
+ This driver has been tested only on the Inspiron 8000 but it may
+ also work with other Dell laptops. You can force loading on other
+ models by passing the parameter `force=1' to the module. Use at
+ your own risk.
+
+ For information on utilities to make use of this driver see the
+ I8K Linux utilities web site at:
+ <http://people.debian.org/~dz/i8k/>
+
+ Say Y if you intend to run this kernel on a Dell Inspiron 8000.
+ Say N otherwise.
+
+config MICROCODE
+ tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ ---help---
+ If you say Y here and also to "/dev file system support" in the
+ 'File systems' section, you will be able to update the microcode on
+ Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
+ Pentium III, Pentium 4, Xeon etc. You will obviously need the
+ actual microcode binary data itself which is not shipped with the
+ Linux kernel.
+
+ For latest news and information on obtaining all the required
+ ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called microcode.
+
+config X86_MSR
+ tristate "/dev/cpu/*/msr - Model-specific register support"
+ help
+ This device gives privileged processes access to the x86
+ Model-Specific Registers (MSRs). It is a character device with
+ major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
+ MSR accesses are directed to a specific CPU on multi-processor
+ systems.
+
+config X86_CPUID
+ tristate "/dev/cpu/*/cpuid - CPU information support"
+ help
+ This device gives processes access to the x86 CPUID instruction to
+ be executed on a specific processor. It is a character device
+ with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
+ /dev/cpu/31/cpuid.
+
+source "drivers/firmware/Kconfig"
+
+choice
+ prompt "High Memory Support"
+ default NOHIGHMEM
+
+config NOHIGHMEM
+ bool "off"
+ ---help---
+ Linux can use up to 64 Gigabytes of physical memory on x86 systems.
+ However, the address space of 32-bit x86 processors is only 4
+ Gigabytes large. That means that, if you have a large amount of
+ physical memory, not all of it can be "permanently mapped" by the
+ kernel. The physical memory that's not permanently mapped is called
+ "high memory".
+
+ If you are compiling a kernel which will never run on a machine with
+ more than 1 Gigabyte total physical RAM, answer "off" here (default
+ choice and suitable for most users). This will result in a "3GB/1GB"
+ split: 3GB are mapped so that each process sees a 3GB virtual memory
+ space and the remaining part of the 4GB virtual memory space is used
+ by the kernel to permanently map as much physical memory as
+ possible.
+
+ If the machine has between 1 and 4 Gigabytes physical RAM, then
+ answer "4GB" here.
+
+ If more than 4 Gigabytes is used then answer "64GB" here. This
+ selection turns Intel PAE (Physical Address Extension) mode on.
+ PAE implements 3-level paging on IA32 processors. PAE is fully
+ supported by Linux, PAE mode is implemented on all recent Intel
+ processors (Pentium Pro and better). NOTE: If you say "64GB" here,
+ then the kernel will not boot on CPUs that don't support PAE!
+
+ The actual amount of total physical memory will either be
+ auto detected or can be forced by using a kernel command line option
+ such as "mem=256M". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ If unsure, say "off".
+
+config HIGHMEM4G
+ bool "4GB"
+ help
+ Select this if you have a 32-bit processor and between 1 and 4
+ gigabytes of physical RAM.
+
+config HIGHMEM64G
+ bool "64GB"
+ help
+ Select this if you have a 32-bit processor and more than 4
+ gigabytes of physical RAM.
+
+endchoice
+
+config HIGHMEM
+ bool
+ depends on HIGHMEM64G || HIGHMEM4G
+ default y
+
+config X86_PAE
+ bool
+ depends on HIGHMEM64G
+ default y
+
+# Common NUMA Features
+config NUMA
+ bool "Numa Memory Allocation and Scheduler Support"
+ depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
+ default n if X86_PC
+ default y if (X86_NUMAQ || X86_SUMMIT)
+
+# Need comments to help the hapless user trying to turn on NUMA support
+comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
+ depends on X86_NUMAQ && (!HIGHMEM64G || !SMP)
+
+comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
+ depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+
+config DISCONTIGMEM
+ bool
+ depends on NUMA
+ default y
+
+config HAVE_ARCH_BOOTMEM_NODE
+ bool
+ depends on NUMA
+ default y
+
+config HAVE_MEMORY_PRESENT
+ bool
+ depends on DISCONTIGMEM
+ default y
+
+config NEED_NODE_MEMMAP_SIZE
+ bool
+ depends on DISCONTIGMEM
+ default y
+
+config HIGHPTE
+ bool "Allocate 3rd-level pagetables from highmem"
+ depends on HIGHMEM4G || HIGHMEM64G
+ help
+ The VM uses one page table entry for each page of physical memory.
+ For systems with a lot of RAM, this can be wasteful of precious
+ low memory. Setting this option will put user-space page table
+ entries in high memory.
+
+config MATH_EMULATION
+ bool "Math emulation"
+ ---help---
+ Linux can emulate a math coprocessor (used for floating point
+ operations) if you don't have one. 486DX and Pentium processors have
+ a math coprocessor built in, 486SX and 386 do not, unless you added
+ a 487DX or 387, respectively. (The messages during boot time can
+ give you some hints here ["man dmesg"].) Everyone needs either a
+ coprocessor or this emulation.
+
+ If you don't have a math coprocessor, you need to say Y here; if you
+ say Y here even though you have a coprocessor, the coprocessor will
+ be used nevertheless. (This behavior can be changed with the kernel
+ command line option "no387", which comes handy if your coprocessor
+ is broken. Try "man bootparam" or see the documentation of your boot
+ loader (lilo or loadlin) about how to pass options to the kernel at
+ boot time.) This means that it is a good idea to say Y here if you
+ intend to use this kernel on different machines.
+
+ More information about the internals of the Linux math coprocessor
+ emulation can be found in <file:arch/i386/math-emu/README>.
+
+ If you are not sure, say Y; apart from resulting in a 66 KB bigger
+ kernel, it won't hurt.
+
+config MTRR
+ bool "MTRR (Memory Type Range Register) support"
+ ---help---
+ On Intel P6 family processors (Pentium Pro, Pentium II and later)
+ the Memory Type Range Registers (MTRRs) may be used to control
+ processor access to memory ranges. This is most useful if you have
+ a video (VGA) card on a PCI or AGP bus. Enabling write-combining
+ allows bus write transfers to be combined into a larger transfer
+ before bursting over the PCI/AGP bus. This can increase performance
+ of image write operations 2.5 times or more. Saying Y here creates a
+ /proc/mtrr file which may be used to manipulate your processor's
+ MTRRs. Typically the X server should use this.
+
+ This code has a reasonably generic interface so that similar
+ control registers on other processors can be easily supported
+ as well:
+
+ The Cyrix 6x86, 6x86MX and M II processors have Address Range
+ Registers (ARRs) which provide a similar functionality to MTRRs. For
+ these, the ARRs are used to emulate the MTRRs.
+ The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
+ MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
+ write-combining. All of these processors are supported by this code
+ and it makes sense to say Y here if you have one of them.
+
+ Saying Y here also fixes a problem with buggy SMP BIOSes which only
+ set the MTRRs for the boot CPU and not for the secondary CPUs. This
+ can lead to all sorts of problems, so it's good to say Y here.
+
+ You can safely say Y even if your machine doesn't have MTRRs, you'll
+ just add about 9 KB to your kernel.
+
+ See <file:Documentation/mtrr.txt> for more information.
+
+config EFI
+ bool "Boot from EFI support (EXPERIMENTAL)"
+ depends on ACPI
+ default n
+ ---help---
+ This enables the the kernel to boot on EFI platforms using
+ system configuration information passed to it from the firmware.
+ This also enables the kernel to use any EFI runtime services that are
+ available (such as the EFI variable services).
+
+ This option is only useful on systems that have EFI firmware
+ and will result in a kernel image that is ~8k larger. In addition,
+ you must use the latest ELILO loader available at
+ <http://elilo.sourceforge.net> in order to take advantage of
+ kernel initialization using EFI information (neither GRUB nor LILO know
+ anything about EFI). However, even with this option, the resultant
+ kernel should continue to boot on existing non-EFI platforms.
+
+config IRQBALANCE
+ bool "Enable kernel irq balancing"
+ depends on SMP && X86_IO_APIC
+ default y
+ help
+ The default yes will allow the kernel to do irq load balancing.
+ Saying no will keep the kernel from doing irq load balancing.
+
+config HAVE_DEC_LOCK
+ bool
+ depends on (SMP || PREEMPT) && X86_CMPXCHG
+ default y
+
+# turning this on wastes a bunch of space.
+# Summit needs it only when NUMA is on
+config BOOT_IOREMAP
+ bool
+ depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
+ default y
+
+config REGPARM
+ bool "Use register arguments (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default n
+ help
+ Compile the kernel with -mregparm=3. This uses a different ABI
+ and passes the first three arguments of a function call in registers.
+ This will probably break binary only modules.
+
+ This feature is only enabled for gcc-3.0 and later - earlier compilers
+ generate incorrect output with certain kernel constructs when
+ -mregparm=3 is used.
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
+endmenu
+
+
+menu "Power management options (ACPI, APM)"
+ depends on !X86_VOYAGER
+
+source kernel/power/Kconfig
+
+source "drivers/acpi/Kconfig"
+
+menu "APM (Advanced Power Management) BIOS Support"
+depends on PM && !X86_VISWS
+
+config APM
+ tristate "APM (Advanced Power Management) BIOS support"
+ depends on PM
+ ---help---
+ APM is a BIOS specification for saving power using several different
+ techniques. This is mostly useful for battery powered laptops with
+ APM compliant BIOSes. If you say Y here, the system time will be
+ reset after a RESUME operation, the /proc/apm device will provide
+ battery status information, and user-space programs will receive
+ notification of APM "events" (e.g. battery status change).
+
+ If you select "Y" here, you can disable actual use of the APM
+ BIOS by passing the "apm=off" option to the kernel at boot time.
+
+ Note that the APM support is almost completely disabled for
+ machines with more than one CPU.
+
+ In order to use APM, you will need supporting software. For location
+ and more information, read <file:Documentation/pm.txt> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver does not spin down disk drives (see the hdparm(8)
+ manpage ("man 8 hdparm") for that), and it doesn't turn off
+ VESA-compliant "green" monitors.
+
+ This driver does not support the TI 4000M TravelMate and the ACER
+ 486/DX4/75 because they don't have compliant BIOSes. Many "green"
+ desktop machines also don't have compliant BIOSes, and this driver
+ may cause those machines to panic during the boot phase.
+
+ Generally, if you don't have a battery in your machine, there isn't
+ much point in using this driver and you should say N. If you get
+ random kernel OOPSes or reboots that don't seem to be related to
+ anything, try disabling/enabling this option (or disabling/enabling
+ APM in your BIOS).
+
+ Some other things you should try when experiencing seemingly random,
+ "weird" problems:
+
+ 1) make sure that you have enough swap space and that it is
+ enabled.
+ 2) pass the "no-hlt" option to the kernel
+ 3) switch on floating point emulation in the kernel and pass
+ the "no387" option to the kernel
+ 4) pass the "floppy=nodma" option to the kernel
+ 5) pass the "mem=4M" option to the kernel (thereby disabling
+ all but the first 4 MB of RAM)
+ 6) make sure that the CPU is not over clocked.
+ 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+ 8) disable the cache from your BIOS settings
+ 9) install a fan for the video card or exchange video RAM
+ 10) install a better fan for the CPU
+ 11) exchange RAM chips
+ 12) exchange the motherboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called apm.
+
+config APM_IGNORE_USER_SUSPEND
+ bool "Ignore USER SUSPEND"
+ depends on APM
+ help
+ This option will ignore USER SUSPEND requests. On machines with a
+ compliant APM BIOS, you want to say N. However, on the NEC Versa M
+ series notebooks, it is necessary to say Y because of a BIOS bug.
+
+config APM_DO_ENABLE
+ bool "Enable PM at boot time"
+ depends on APM
+ ---help---
+ Enable APM features at boot time. From page 36 of the APM BIOS
+ specification: "When disabled, the APM BIOS does not automatically
+ power manage devices, enter the Standby State, enter the Suspend
+ State, or take power saving steps in response to CPU Idle calls."
+ This driver will make CPU Idle calls when Linux is idle (unless this
+ feature is turned off -- see "Do CPU IDLE calls", below). This
+ should always save battery power, but more complicated APM features
+ will be dependent on your BIOS implementation. You may need to turn
+ this option off if your computer hangs at boot time when using APM
+ support, or if it beeps continuously instead of suspending. Turn
+ this off if you have a NEC UltraLite Versa 33/C or a Toshiba
+ T400CDT. This is off by default since most machines do fine without
+ this feature.
+
+config APM_CPU_IDLE
+ bool "Make CPU Idle calls when idle"
+ depends on APM
+ help
+ Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
+ On some machines, this can activate improved power savings, such as
+ a slowed CPU clock rate, when the machine is idle. These idle calls
+ are made after the idle loop has run for some length of time (e.g.,
+ 333 mS). On some machines, this will cause a hang at boot time or
+ whenever the CPU becomes idle. (On machines with more than one CPU,
+ this option does nothing.)
+
+config APM_DISPLAY_BLANK
+ bool "Enable console blanking using APM"
+ depends on APM
+ help
+ Enable console blanking using the APM. Some laptops can use this to
+ turn off the LCD backlight when the screen blanker of the Linux
+ virtual console blanks the screen. Note that this is only used by
+ the virtual console screen blanker, and won't turn off the backlight
+ when using the X Window system. This also doesn't have anything to
+ do with your VESA-compliant power-saving monitor. Further, this
+ option doesn't work for all laptops -- it might not turn off your
+ backlight at all, or it might print a lot of errors to the console,
+ especially if you are using gpm.
+
+config APM_RTC_IS_GMT
+ bool "RTC stores time in GMT"
+ depends on APM
+ help
+ Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
+ stores the time in GMT (Greenwich Mean Time). Say N if your RTC
+ stores localtime.
+
+ It is in fact recommended to store GMT in your RTC, because then you
+ don't have to worry about daylight savings time changes. The only
+ reason not to use GMT in your RTC is if you also run a broken OS
+ that doesn't understand GMT.
+
+config APM_ALLOW_INTS
+ bool "Allow interrupts during APM BIOS calls"
+ depends on APM
+ help
+ Normally we disable external interrupts while we are making calls to
+ the APM BIOS as a measure to lessen the effects of a badly behaving
+ BIOS implementation. The BIOS should reenable interrupts if it
+ needs to. Unfortunately, some BIOSes do not -- especially those in
+ many of the newer IBM Thinkpads. If you experience hangs when you
+ suspend, try setting this to Y. Otherwise, say N.
+
+config APM_REAL_MODE_POWER_OFF
+ bool "Use real mode APM BIOS call to power off"
+ depends on APM
+ help
+ Use real mode APM BIOS calls to switch off the computer. This is
+ a work-around for a number of buggy BIOSes. Switch this option on if
+ your computer crashes instead of powering off properly.
+
+endmenu
+
+source "arch/i386/kernel/cpu/cpufreq/Kconfig"
+
+endmenu
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+ bool "PCI support" if !X86_VISWS
+ depends on !X86_VOYAGER
+ default y if X86_VISWS
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+choice
+ prompt "PCI access mode"
+ depends on PCI && !X86_VISWS
+ default PCI_GOANY
+ ---help---
+ On PCI systems, the BIOS can be used to detect the PCI devices and
+ determine their configuration. However, some old PCI motherboards
+ have BIOS bugs and may crash if this is done. Also, some embedded
+ PCI-based systems don't have any BIOS at all. Linux can also try to
+ detect the PCI hardware directly without using the BIOS.
+
+ With this option, you can specify how Linux should detect the
+ PCI devices. If you choose "BIOS", the BIOS will be used,
+ if you choose "Direct", the BIOS won't be used, and if you
+ choose "MMConfig", then PCI Express MMCONFIG will be used.
+ If you choose "Any", the kernel will try MMCONFIG, then the
+ direct access method and falls back to the BIOS if that doesn't
+ work. If unsure, go with the default, which is "Any".
+
+config PCI_GOBIOS
+ bool "BIOS"
+
+config PCI_GOMMCONFIG
+ bool "MMConfig"
+
+config PCI_GODIRECT
+ bool "Direct"
+
+config PCI_GOANY
+ bool "Any"
+
+endchoice
+
+config PCI_BIOS
+ bool
+ depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+ default y
+
+config PCI_DIRECT
+ bool
+ depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
+ default y
+
+config PCI_MMCONFIG
+ bool
+ depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI))
+ select ACPI_BOOT
+ default y
+
+source "drivers/pci/pcie/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+config ISA
+ bool "ISA support"
+ depends on !(X86_VOYAGER || X86_VISWS)
+ help
+ Find out whether you have ISA slots on your motherboard. ISA is the
+ name of a bus system, i.e. the way the CPU talks to the other stuff
+ inside your box. Other bus systems are PCI, EISA, MicroChannel
+ (MCA) or VESA. ISA is an older system, now being displaced by PCI;
+ newer boards don't support it. If you have ISA, say Y, otherwise N.
+
+config EISA
+ bool "EISA support"
+ depends on ISA
+ ---help---
+ The Extended Industry Standard Architecture (EISA) bus was
+ developed as an open alternative to the IBM MicroChannel bus.
+
+ The EISA bus provided some of the features of the IBM MicroChannel
+ bus while maintaining backward compatibility with cards made for
+ the older ISA bus. The EISA bus saw limited use between 1988 and
+ 1995 when it was made obsolete by the PCI bus.
+
+ Say Y here if you are building a kernel for an EISA-based machine.
+
+ Otherwise, say N.
+
+source "drivers/eisa/Kconfig"
+
+config MCA
+ bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
+ default y if X86_VOYAGER
+ help
+ MicroChannel Architecture is found in some IBM PS/2 machines and
+ laptops. It is a bus system similar to PCI or ISA. See
+ <file:Documentation/mca.txt> (and especially the web page given
+ there) before attempting to build an MCA bus kernel.
+
+source "drivers/mca/Kconfig"
+
+config SCx200
+ tristate "NatSemi SCx200 support"
+ depends on !X86_VOYAGER
+ help
+ This provides basic support for the National Semiconductor SCx200
+ processor. Right now this is just a driver for the GPIO pins.
+
+ If you don't know what to do here, say N.
+
+ This support is also available as a module. If compiled as a
+ module, it will be called scx200.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/i386/oprofile/Kconfig"
+
+source "arch/i386/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+config X86_SMP
+ bool
+ depends on SMP && !X86_VOYAGER
+ default y
+
+config X86_HT
+ bool
+ depends on SMP && !(X86_VISWS || X86_VOYAGER)
+ default y
+
+config X86_BIOS_REBOOT
+ bool
+ depends on !(X86_VISWS || X86_VOYAGER)
+ default y
+
+config X86_TRAMPOLINE
+ bool
+ depends on X86_SMP || (X86_VOYAGER && SMP)
+ default y
+
+config PC
+ bool
+ depends on X86 && !EMBEDDED
+ default y
diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug
new file mode 100644
index 0000000..bfb2064
--- /dev/null
+++ b/arch/i386/Kconfig.debug
@@ -0,0 +1,72 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ default y
+ help
+ Write kernel log output directly into the VGA buffer or to a serial
+ port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash.
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+
+config KPROBES
+ bool "Kprobes"
+ depends on DEBUG_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+comment "Page alloc debug is incompatible with Software Suspend on i386"
+ depends on DEBUG_KERNEL && SOFTWARE_SUSPEND
+
+config DEBUG_PAGEALLOC
+ bool "Page alloc debugging"
+ depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND
+ help
+ Unmap pages from the kernel linear mapping after free_pages().
+ This results in a large slowdown, but helps to find certain types
+ of memory corruptions.
+
+config 4KSTACKS
+ bool "Use 4Kb for kernel stacks instead of 8Kb"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use a 4Kb stacksize for the
+ kernel stack attached to each process/thread. This facilitates
+ running more threads on a system and also reduces the pressure
+ on the VM subsystem for higher order allocations. This option
+ will also use IRQ stacks to compensate for the reduced stackspace.
+
+config X86_FIND_SMP_CONFIG
+ bool
+ depends on X86_LOCAL_APIC || X86_VOYAGER
+ default y
+
+config X86_MPPARSE
+ bool
+ depends on X86_LOCAL_APIC && !X86_VISWS
+ default y
+
+endmenu
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
new file mode 100644
index 0000000..314c714
--- /dev/null
+++ b/arch/i386/Makefile
@@ -0,0 +1,173 @@
+#
+# i386/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" cleaning up for this architecture.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+#
+# 19990713 Artur Skawina <skawina@geocities.com>
+# Added '-march' and '-mpreferred-stack-boundary' support
+#
+# Kianusch Sayah Karadji <kianusch@sk-tech.net>
+# Added support for GEODE CPU
+
+LDFLAGS := -m elf_i386
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+LDFLAGS_vmlinux :=
+CHECKFLAGS += -D__i386__
+
+CFLAGS += -pipe -msoft-float
+
+# prevent gcc from keeping the stack 16 byte aligned
+CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
+
+align := $(cc-option-align)
+cflags-$(CONFIG_M386) += -march=i386
+cflags-$(CONFIG_M486) += -march=i486
+cflags-$(CONFIG_M586) += -march=i586
+cflags-$(CONFIG_M586TSC) += -march=i586
+cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686) += -march=i686
+cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2)
+cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3)
+cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3)
+cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4)
+cflags-$(CONFIG_MK6) += -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
+
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN) += -march=i486
+
+# MediaGX aka Geode support
+cflags-$(CONFIG_MGEODE) += $(call cc-option,-march=pentium-mmx,-march=i586)
+
+# -mregparm=3 works ok on gcc-3.0 and later
+#
+GCC_VERSION := $(call cc-version)
+cflags-$(CONFIG_REGPARM) += $(shell if [ $(GCC_VERSION) -ge 0300 ] ; then echo "-mregparm=3"; fi ;)
+
+# Disable unit-at-a-time mode, it makes gcc use a lot more stack
+# due to the lack of sharing of stacklots.
+CFLAGS += $(call cc-option,-fno-unit-at-a-time)
+
+CFLAGS += $(cflags-y)
+
+# Default subarch .c files
+mcore-y := mach-default
+
+# Voyager subarch support
+mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-i386/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER) := mach-voyager
+
+# VISWS subarch support
+mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-i386/mach-visws
+mcore-$(CONFIG_X86_VISWS) := mach-visws
+
+# NUMAQ subarch support
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := mach-default
+
+# BIGSMP subarch support
+mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP) := mach-default
+
+#Summit subarch support
+mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
+mcore-$(CONFIG_X86_SUMMIT) := mach-default
+
+# generic subarchitecture
+mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-i386/mach-generic
+mcore-$(CONFIG_X86_GENERICARCH) := mach-default
+core-$(CONFIG_X86_GENERICARCH) += arch/i386/mach-generic/
+
+# ES7000 subarch support
+mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-i386/mach-es7000
+mcore-$(CONFIG_X86_ES7000) := mach-default
+core-$(CONFIG_X86_ES7000) := arch/i386/mach-es7000/
+
+# default subarch .h files
+mflags-y += -Iinclude/asm-i386/mach-default
+
+head-y := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
+
+libs-y += arch/i386/lib/
+core-y += arch/i386/kernel/ \
+ arch/i386/mm/ \
+ arch/i386/$(mcore-y)/ \
+ arch/i386/crypto/
+drivers-$(CONFIG_MATH_EMULATION) += arch/i386/math-emu/
+drivers-$(CONFIG_PCI) += arch/i386/pci/
+# must be linked after kernel/
+drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/
+drivers-$(CONFIG_PM) += arch/i386/power/
+
+CFLAGS += $(mflags-y)
+AFLAGS += $(mflags-y)
+
+boot := arch/i386/boot
+
+.PHONY: zImage bzImage compressed zlilo bzlilo \
+ zdisk bzdisk fdimage fdimage144 fdimage288 install
+
+all: bzImage
+
+# KBUILD_IMAGE specify target image being built
+ KBUILD_IMAGE := $(boot)/bzImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/i386/boot/zImage
+
+zImage bzImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
+
+compressed: zImage
+
+zlilo bzlilo: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
+
+zdisk bzdisk: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
+
+fdimage fdimage144 fdimage288: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+
+install:
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+
+prepare: include/asm-$(ARCH)/asm_offsets.h
+CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
+
+arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
+ include/config/MARKER
+
+include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
+ $(call filechk,gen-asm-offsets)
+
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/i386/boot
+
+define archhelp
+ echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/installkernel or'
+ echo ' (distribution) /sbin/installkernel or'
+ echo ' install to $$(INSTALL_PATH) and run lilo'
+ echo ' bzdisk - Create a boot floppy in /dev/fd0'
+ echo ' fdimage - Create a boot floppy image'
+endef
+
+CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf
diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile
new file mode 100644
index 0000000..aa7064a
--- /dev/null
+++ b/arch/i386/boot/Makefile
@@ -0,0 +1,104 @@
+#
+# arch/i386/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+#
+
+# ROOT_DEV specifies the default root-device when making the image.
+# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
+# the default of FLOPPY is used by 'build'.
+
+ROOT_DEV := CURRENT
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+
+# If you want the RAM disk device, define this to be the size in blocks.
+
+#RAMDISK := -DRAMDISK=512
+
+targets := vmlinux.bin bootsect bootsect.o setup setup.o \
+ zImage bzImage
+subdir- := compressed
+
+hostprogs-y := tools/build
+
+HOSTCFLAGS_build.o := $(LINUXINCLUDE)
+
+# ---------------------------------------------------------------------------
+
+$(obj)/zImage: IMAGE_OFFSET := 0x1000
+$(obj)/zImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK)
+$(obj)/bzImage: IMAGE_OFFSET := 0x100000
+$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
+$(obj)/bzImage: BUILDFLAGS := -b
+
+quiet_cmd_image = BUILD $@
+cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
+ $(obj)/vmlinux.bin $(ROOT_DEV) > $@
+
+$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
+ $(obj)/vmlinux.bin $(obj)/tools/build FORCE
+ $(call if_changed,image)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
+LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
+
+$(obj)/setup $(obj)/bootsect: %: %.o FORCE
+ $(call if_changed,ld)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+
+# Set this if you want to pass append arguments to the zdisk/fdimage kernel
+FDARGS =
+
+$(obj)/mtools.conf: $(src)/mtools.conf.in
+ sed -e 's|@OBJ@|$(obj)|g' < $< > $@
+
+# This requires write access to /dev/fd0
+zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
+ MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
+ syslinux /dev/fd0 ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
+
+# These require being root or having syslinux 2.02 or higher installed
+fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
+ MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
+
+fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
+ MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
+
+zlilo: $(BOOTIMAGE)
+ if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
+ if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+ cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
+ cp System.map $(INSTALL_PATH)/
+ if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+install: $(BOOTIMAGE)
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
diff --git a/arch/i386/boot/bootsect.S b/arch/i386/boot/bootsect.S
new file mode 100644
index 0000000..ba9fe14d
--- /dev/null
+++ b/arch/i386/boot/bootsect.S
@@ -0,0 +1,98 @@
+/*
+ * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * modified by Drew Eckhardt
+ * modified by Bruce Evans (bde)
+ * modified by Chris Noe (May 1999) (as86 -> gas)
+ * gutted by H. Peter Anvin (Jan 2003)
+ *
+ * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
+ * addresses must be multiplied by 16 to obtain their respective linear
+ * addresses. To avoid confusion, linear addresses are written using leading
+ * hex while segment addresses are written as segment:offset.
+ *
+ */
+
+#include <asm/boot.h>
+
+SETUPSECTS = 4 /* default nr of setup-sectors */
+BOOTSEG = 0x07C0 /* original address of boot-sector */
+INITSEG = DEF_INITSEG /* we move boot here - out of the way */
+SETUPSEG = DEF_SETUPSEG /* setup starts here */
+SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
+SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
+ /* to be loaded */
+ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
+SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
+
+#ifndef SVGA_MODE
+#define SVGA_MODE ASK_VGA
+#endif
+
+#ifndef RAMDISK
+#define RAMDISK 0
+#endif
+
+#ifndef ROOT_RDONLY
+#define ROOT_RDONLY 1
+#endif
+
+.code16
+.text
+
+.global _start
+_start:
+
+ # Normalize the start address
+ jmpl $BOOTSEG, $start2
+
+start2:
+ movw %cs, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ movw $0x7c00, %sp
+ sti
+ cld
+
+ movw $bugger_off_msg, %si
+
+msg_loop:
+ lodsb
+ andb %al, %al
+ jz die
+ movb $0xe, %ah
+ movw $7, %bx
+ int $0x10
+ jmp msg_loop
+
+die:
+ # Allow the user to press a key, then reboot
+ xorw %ax, %ax
+ int $0x16
+ int $0x19
+
+ # int 0x19 should never return. In case it does anyway,
+ # invoke the BIOS reset code...
+ ljmp $0xf000,$0xfff0
+
+
+bugger_off_msg:
+ .ascii "Direct booting from floppy is no longer supported.\r\n"
+ .ascii "Please use a boot loader program instead.\r\n"
+ .ascii "\n"
+ .ascii "Remove disk and press any key to reboot . . .\r\n"
+ .byte 0
+
+
+ # Kernel attributes; used by setup
+
+ .org 497
+setup_sects: .byte SETUPSECTS
+root_flags: .word ROOT_RDONLY
+syssize: .word SYSSIZE
+swap_dev: .word SWAP_DEV
+ram_size: .word RAMDISK
+vid_mode: .word SVGA_MODE
+root_dev: .word ROOT_DEV
+boot_flag: .word 0xAA55
diff --git a/arch/i386/boot/compressed/Makefile b/arch/i386/boot/compressed/Makefile
new file mode 100644
index 0000000..258ea95
--- /dev/null
+++ b/arch/i386/boot/compressed/Makefile
@@ -0,0 +1,25 @@
+#
+# linux/arch/i386/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+EXTRA_AFLAGS := -traditional
+
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32
+
+$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S
new file mode 100644
index 0000000..c5e80b6
--- /dev/null
+++ b/arch/i386/boot/compressed/head.S
@@ -0,0 +1,128 @@
+/*
+ * linux/boot/head.S
+ *
+ * Copyright (C) 1991, 1992, 1993 Linus Torvalds
+ */
+
+/*
+ * head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there. This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+.text
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+
+ .globl startup_32
+
+startup_32:
+ cld
+ cli
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+
+ lss stack_start,%esp
+ xorl %eax,%eax
+1: incl %eax # check that A20 really IS enabled
+ movl %eax,0x000000 # loop forever if it isn't
+ cmpl %eax,0x100000
+ je 1b
+
+/*
+ * Initialize eflags. Some BIOS's leave bits like NT set. This would
+ * confuse the debugger if this code is traced.
+ * XXX - best to initialize before switching to protected mode.
+ */
+ pushl $0
+ popfl
+/*
+ * Clear BSS
+ */
+ xorl %eax,%eax
+ movl $_edata,%edi
+ movl $_end,%ecx
+ subl %edi,%ecx
+ cld
+ rep
+ stosb
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+ subl $16,%esp # place for structure on the stack
+ movl %esp,%eax
+ pushl %esi # real mode pointer as second arg
+ pushl %eax # address of structure as first arg
+ call decompress_kernel
+ orl %eax,%eax
+ jnz 3f
+ popl %esi # discard address
+ popl %esi # real mode pointer
+ xorl %ebx,%ebx
+ ljmp $(__BOOT_CS), $0x100000
+
+/*
+ * We come here, if we were loaded high.
+ * We need to move the move-in-place routine down to 0x1000
+ * and then start it with the buffer addresses in registers,
+ * which we got from the stack.
+ */
+3:
+ movl $move_routine_start,%esi
+ movl $0x1000,%edi
+ movl $move_routine_end,%ecx
+ subl %esi,%ecx
+ addl $3,%ecx
+ shrl $2,%ecx
+ cld
+ rep
+ movsl
+
+ popl %esi # discard the address
+ popl %ebx # real mode pointer
+ popl %esi # low_buffer_start
+ popl %ecx # lcount
+ popl %edx # high_buffer_start
+ popl %eax # hcount
+ movl $0x100000,%edi
+ cli # make sure we don't get interrupted
+ ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
+
+/*
+ * Routine (template) for moving the decompressed kernel in place,
+ * if we were high loaded. This _must_ PIC-code !
+ */
+move_routine_start:
+ movl %ecx,%ebp
+ shrl $2,%ecx
+ rep
+ movsl
+ movl %ebp,%ecx
+ andl $3,%ecx
+ rep
+ movsb
+ movl %edx,%esi
+ movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0
+ addl $3,%ecx
+ shrl $2,%ecx
+ rep
+ movsl
+ movl %ebx,%esi # Restore setup pointer
+ xorl %ebx,%ebx
+ ljmp $(__BOOT_CS), $0x100000
+move_routine_end:
diff --git a/arch/i386/boot/compressed/misc.c b/arch/i386/boot/compressed/misc.c
new file mode 100644
index 0000000..fa67045
--- /dev/null
+++ b/arch/i386/boot/compressed/misc.c
@@ -0,0 +1,382 @@
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+
+#include <linux/linkage.h>
+#include <linux/vmalloc.h>
+#include <linux/tty.h>
+#include <video/edid.h>
+#include <asm/io.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+
+/*
+ * Why do we do this? Don't ask me..
+ *
+ * Incomprehensible are the ways of bootloaders.
+ */
+static void* memset(void *, int, size_t);
+static void* memcpy(void *, __const void *, size_t);
+#define memzero(s, n) memset ((s), 0, (n))
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+static unsigned insize = 0; /* valid bytes in inbuf */
+static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+static unsigned char *real_mode; /* Pointer to real-mode data */
+
+#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2))
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0))
+#endif
+#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
+
+extern char input_data[];
+extern int input_len;
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+
+static void putstr(const char *);
+
+extern int end;
+static long free_mem_ptr = (long)&end;
+static long free_mem_end_ptr;
+
+#define INPLACE_MOVE_ROUTINE 0x1000
+#define LOW_BUFFER_START 0x2000
+#define LOW_BUFFER_MAX 0x90000
+#define HEAP_SIZE 0x3000
+static unsigned int low_buffer_end, low_buffer_size;
+static int high_loaded =0;
+static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+
+static char *vidmem = (char *)0xb8000;
+static int vidport;
+static int lines, cols;
+
+#ifdef CONFIG_X86_NUMAQ
+static void * xquad_portio = NULL;
+#endif
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+ if (free_mem_ptr <= 0) error("Memory error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("Out of memory");
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+static void scroll(void)
+{
+ int i;
+
+ memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
+ for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
+ vidmem[i] = ' ';
+}
+
+static void putstr(const char *s)
+{
+ int x,y,pos;
+ char c;
+
+ x = RM_SCREEN_INFO.orig_x;
+ y = RM_SCREEN_INFO.orig_y;
+
+ while ( ( c = *s++ ) != '\0' ) {
+ if ( c == '\n' ) {
+ x = 0;
+ if ( ++y >= lines ) {
+ scroll();
+ y--;
+ }
+ } else {
+ vidmem [ ( x + cols * y ) * 2 ] = c;
+ if ( ++x >= cols ) {
+ x = 0;
+ if ( ++y >= lines ) {
+ scroll();
+ y--;
+ }
+ }
+ }
+ }
+
+ RM_SCREEN_INFO.orig_x = x;
+ RM_SCREEN_INFO.orig_y = y;
+
+ pos = (x + cols * y) * 2; /* Update cursor position */
+ outb_p(14, vidport);
+ outb_p(0xff & (pos >> 9), vidport+1);
+ outb_p(15, vidport);
+ outb_p(0xff & (pos >> 1), vidport+1);
+}
+
+static void* memset(void* s, int c, size_t n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+ return s;
+}
+
+static void* memcpy(void* __dest, __const void* __src,
+ size_t __n)
+{
+ int i;
+ char *d = (char *)__dest, *s = (char *)__src;
+
+ for (i=0;i<__n;i++) d[i] = s[i];
+ return __dest;
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf(void)
+{
+ if (insize != 0) {
+ error("ran out of input data");
+ }
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window_low(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window_high(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *output_data++ = *in++;
+ if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window(void)
+{
+ if (high_loaded) flush_window_high();
+ else flush_window_low();
+}
+
+static void error(char *x)
+{
+ putstr("\n\n");
+ putstr(x);
+ putstr("\n\n -- System halted");
+
+ while(1); /* Halt */
+}
+
+#define STACK_SIZE (4096)
+
+long user_stack [STACK_SIZE];
+
+struct {
+ long * a;
+ short b;
+ } stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS };
+
+static void setup_normal_output_buffer(void)
+{
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory");
+#else
+ if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
+#endif
+ output_data = (char *)0x100000; /* Points to 1M */
+ free_mem_end_ptr = (long)real_mode;
+}
+
+struct moveparams {
+ uch *low_buffer_start; int lcount;
+ uch *high_buffer_start; int hcount;
+};
+
+static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE);
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
+#else
+ if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) <
+ (3*1024))
+ error("Less than 4MB of memory");
+#endif
+ mv->low_buffer_start = output_data = (char *)LOW_BUFFER_START;
+ low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX
+ ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff;
+ low_buffer_size = low_buffer_end - LOW_BUFFER_START;
+ high_loaded = 1;
+ free_mem_end_ptr = (long)high_buffer_start;
+ if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) {
+ high_buffer_start = (uch *)(0x100000 + low_buffer_size);
+ mv->hcount = 0; /* say: we need not to move high_buffer */
+ }
+ else mv->hcount = -1;
+ mv->high_buffer_start = high_buffer_start;
+}
+
+static void close_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ if (bytes_out > low_buffer_size) {
+ mv->lcount = low_buffer_size;
+ if (mv->hcount)
+ mv->hcount = bytes_out - low_buffer_size;
+ } else {
+ mv->lcount = bytes_out;
+ mv->hcount = 0;
+ }
+}
+
+
+asmlinkage int decompress_kernel(struct moveparams *mv, void *rmode)
+{
+ real_mode = rmode;
+
+ if (RM_SCREEN_INFO.orig_video_mode == 7) {
+ vidmem = (char *) 0xb0000;
+ vidport = 0x3b4;
+ } else {
+ vidmem = (char *) 0xb8000;
+ vidport = 0x3d4;
+ }
+
+ lines = RM_SCREEN_INFO.orig_video_lines;
+ cols = RM_SCREEN_INFO.orig_video_cols;
+
+ if (free_mem_ptr < 0x100000) setup_normal_output_buffer();
+ else setup_output_buffer_if_we_run_high(mv);
+
+ makecrc();
+ putstr("Uncompressing Linux... ");
+ gunzip();
+ putstr("Ok, booting the kernel.\n");
+ if (high_loaded) close_output_buffer_if_we_run_high(mv);
+ return high_loaded;
+}
diff --git a/arch/i386/boot/compressed/vmlinux.scr b/arch/i386/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..1ed9d79
--- /dev/null
+++ b/arch/i386/boot/compressed/vmlinux.scr
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S
new file mode 100644
index 0000000..027d6b3
--- /dev/null
+++ b/arch/i386/boot/edd.S
@@ -0,0 +1,176 @@
+/*
+ * BIOS Enhanced Disk Drive support
+ * Copyright (C) 2002, 2003, 2004 Dell, Inc.
+ * by Matt Domsch <Matt_Domsch@dell.com> October 2002
+ * conformant to T13 Committee www.t13.org
+ * projects 1572D, 1484D, 1386D, 1226DT
+ * disk signature read by Matt Domsch <Matt_Domsch@dell.com>
+ * and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004
+ * legacy CHS retreival by Patrick J. LoPresti <patl@users.sourceforge.net>
+ * March 2004
+ * Command line option parsing, Matt Domsch, November 2004
+ */
+
+#include <linux/edd.h>
+#include <asm/setup.h>
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+ movb $0, (EDD_MBR_SIG_NR_BUF)
+ movb $0, (EDDNR)
+
+# Check the command line for two options:
+# edd=of disables EDD completely (edd=off)
+# edd=sk skips the MBR test (edd=skipmbr)
+ pushl %esi
+ cmpl $0, %cs:cmd_line_ptr
+ jz done_cl
+ movl %cs:(cmd_line_ptr), %esi
+# ds:esi has the pointer to the command line now
+ movl $(COMMAND_LINE_SIZE-7), %ecx
+# loop through kernel command line one byte at a time
+cl_loop:
+ cmpl $EDD_CL_EQUALS, (%si)
+ jz found_edd_equals
+ incl %esi
+ loop cl_loop
+ jmp done_cl
+found_edd_equals:
+# only looking at first two characters after equals
+ addl $4, %esi
+ cmpw $EDD_CL_OFF, (%si) # edd=of
+ jz do_edd_off
+ cmpw $EDD_CL_SKIP, (%si) # edd=sk
+ jz do_edd_skipmbr
+ jmp done_cl
+do_edd_skipmbr:
+ popl %esi
+ jmp edd_start
+do_edd_off:
+ popl %esi
+ jmp edd_done
+done_cl:
+ popl %esi
+
+
+# Read the first sector of each BIOS disk device and store the 4-byte signature
+edd_mbr_sig_start:
+ movb $0x80, %dl # from device 80
+ movw $EDD_MBR_SIG_BUF, %bx # store buffer ptr in bx
+edd_mbr_sig_read:
+ movl $0xFFFFFFFF, %eax
+ movl %eax, (%bx) # assume failure
+ pushw %bx
+ movb $READ_SECTORS, %ah
+ movb $1, %al # read 1 sector
+ movb $0, %dh # at head 0
+ movw $1, %cx # cylinder 0, sector 0
+ pushw %es
+ pushw %ds
+ popw %es
+ movw $EDDBUF, %bx # disk's data goes into EDDBUF
+ pushw %dx # work around buggy BIOSes
+ stc # work around buggy BIOSes
+ int $0x13
+ sti # work around buggy BIOSes
+ popw %dx
+ popw %es
+ popw %bx
+ jc edd_mbr_sig_done # on failure, we're done.
+ movl (EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR
+ movl %eax, (%bx) # store success
+ incb (EDD_MBR_SIG_NR_BUF) # note that we stored something
+ incb %dl # increment to next device
+ addw $4, %bx # increment sig buffer ptr
+ cmpb $EDD_MBR_SIG_MAX, (EDD_MBR_SIG_NR_BUF) # Out of space?
+ jb edd_mbr_sig_read # keep looping
+edd_mbr_sig_done:
+
+# Do the BIOS Enhanced Disk Drive calls
+# This consists of two calls:
+# int 13h ah=41h "Check Extensions Present"
+# int 13h ah=48h "Get Device Parameters"
+# int 13h ah=08h "Legacy Get Device Parameters"
+#
+# A buffer of size EDDMAXNR*(EDDEXTSIZE+EDDPARMSIZE) is reserved for our use
+# in the boot_params at EDDBUF. The first four bytes of which are
+# used to store the device number, interface support map and version
+# results from fn41. The next four bytes are used to store the legacy
+# cylinders, heads, and sectors from fn08. The following 74 bytes are used to
+# store the results from fn48. Starting from device 80h, fn41, then fn48
+# are called and their results stored in EDDBUF+n*(EDDEXTSIZE+EDDPARMIZE).
+# Then the pointer is incremented to store the data for the next call.
+# This repeats until either a device doesn't exist, or until EDDMAXNR
+# devices have been stored.
+# The one tricky part is that ds:si always points EDDEXTSIZE bytes into
+# the structure, and the fn41 and fn08 results are stored at offsets
+# from there. This removes the need to increment the pointer for
+# every store, and leaves it ready for the fn48 call.
+# A second one-byte buffer, EDDNR, in the boot_params stores
+# the number of BIOS devices which exist, up to EDDMAXNR.
+# In setup.c, copy_edd() stores both boot_params buffers away
+# for later use, as they would get overwritten otherwise.
+# This code is sensitive to the size of the structs in edd.h
+edd_start:
+ # %ds points to the bootsector
+ # result buffer for fn48
+ movw $EDDBUF+EDDEXTSIZE, %si # in ds:si, fn41 results
+ # kept just before that
+ movb $0x80, %dl # BIOS device 0x80
+
+edd_check_ext:
+ movb $CHECKEXTENSIONSPRESENT, %ah # Function 41
+ movw $EDDMAGIC1, %bx # magic
+ int $0x13 # make the call
+ jc edd_done # no more BIOS devices
+
+ cmpw $EDDMAGIC2, %bx # is magic right?
+ jne edd_next # nope, next...
+
+ movb %dl, %ds:-8(%si) # store device number
+ movb %ah, %ds:-7(%si) # store version
+ movw %cx, %ds:-6(%si) # store extensions
+ incb (EDDNR) # note that we stored something
+
+edd_get_device_params:
+ movw $EDDPARMSIZE, %ds:(%si) # put size
+ movw $0x0, %ds:2(%si) # work around buggy BIOSes
+ movb $GETDEVICEPARAMETERS, %ah # Function 48
+ int $0x13 # make the call
+ # Don't check for fail return
+ # it doesn't matter.
+edd_get_legacy_chs:
+ xorw %ax, %ax
+ movw %ax, %ds:-4(%si)
+ movw %ax, %ds:-2(%si)
+ # Ralf Brown's Interrupt List says to set ES:DI to
+ # 0000h:0000h "to guard against BIOS bugs"
+ pushw %es
+ movw %ax, %es
+ movw %ax, %di
+ pushw %dx # legacy call clobbers %dl
+ movb $LEGACYGETDEVICEPARAMETERS, %ah # Function 08
+ int $0x13 # make the call
+ jc edd_legacy_done # failed
+ movb %cl, %al # Low 6 bits are max
+ andb $0x3F, %al # sector number
+ movb %al, %ds:-1(%si) # Record max sect
+ movb %dh, %ds:-2(%si) # Record max head number
+ movb %ch, %al # Low 8 bits of max cyl
+ shr $6, %cl
+ movb %cl, %ah # High 2 bits of max cyl
+ movw %ax, %ds:-4(%si)
+
+edd_legacy_done:
+ popw %dx
+ popw %es
+ movw %si, %ax # increment si
+ addw $EDDPARMSIZE+EDDEXTSIZE, %ax
+ movw %ax, %si
+
+edd_next:
+ incb %dl # increment to next device
+ cmpb $EDDMAXNR, (EDDNR) # Out of space?
+ jb edd_check_ext # keep looping
+
+edd_done:
+#endif
diff --git a/arch/i386/boot/install.sh b/arch/i386/boot/install.sh
new file mode 100644
index 0000000..90f2452
--- /dev/null
+++ b/arch/i386/boot/install.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# arch/i386/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install" script for i386 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+
+if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
+if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+
+# Default install - same as make zlilo
+
+if [ -f $4/vmlinuz ]; then
+ mv $4/vmlinuz $4/vmlinuz.old
+fi
+
+if [ -f $4/System.map ]; then
+ mv $4/System.map $4/System.old
+fi
+
+cat $2 > $4/vmlinuz
+cp $3 $4/System.map
+
+if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
diff --git a/arch/i386/boot/mtools.conf.in b/arch/i386/boot/mtools.conf.in
new file mode 100644
index 0000000..efd6d24
--- /dev/null
+++ b/arch/i386/boot/mtools.conf.in
@@ -0,0 +1,17 @@
+#
+# mtools configuration file for "make (b)zdisk"
+#
+
+# Actual floppy drive
+drive a:
+ file="/dev/fd0"
+
+# 1.44 MB floppy disk image
+drive v:
+ file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
+
+# 2.88 MB floppy disk image (mostly for virtual uses)
+drive w:
+ file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
+
+
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
new file mode 100644
index 0000000..a934ab3
--- /dev/null
+++ b/arch/i386/boot/setup.S
@@ -0,0 +1,1028 @@
+/*
+ * setup.S Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * setup.s is responsible for getting the system data from the BIOS,
+ * and putting them into the appropriate places in system memory.
+ * both setup.s and system has been loaded by the bootblock.
+ *
+ * This code asks the bios for memory/disk/other parameters, and
+ * puts them in a "safe" place: 0x90000-0x901FF, ie where the
+ * boot-block used to be. It is then up to the protected mode
+ * system to read them from there before the area is overwritten
+ * for buffer-blocks.
+ *
+ * Move PS/2 aux init code to psaux.c
+ * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
+ *
+ * some changes and additional features by Christoph Niemann,
+ * March 1993/June 1994 (Christoph.Niemann@linux.org)
+ *
+ * add APM BIOS checking by Stephen Rothwell, May 1994
+ * (sfr@canb.auug.org.au)
+ *
+ * High load stuff, initrd support and position independency
+ * by Hans Lermen & Werner Almesberger, February 1996
+ * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
+ *
+ * Video handling moved to video.S by Martin Mares, March 1996
+ * <mj@k332.feld.cvut.cz>
+ *
+ * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
+ * parsons) to avoid loadlin confusion, July 1997
+ *
+ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
+ * <stiker@northlink.com>
+ *
+ * Fix to work around buggy BIOSes which dont use carry bit correctly
+ * and/or report extended memory in CX/DX for e801h memory size detection
+ * call. As a result the kernel got wrong figures. The int15/e801h docs
+ * from Ralf Brown interrupt list seem to indicate AX/BX should be used
+ * anyway. So to avoid breaking many machines (presumably there was a reason
+ * to orginally use CX/DX instead of AX/BX), we do a kludge to see
+ * if CX/DX have been changed in the e801 call and if so use AX/BX .
+ * Michael Miller, April 2001 <michaelm@mjmm.org>
+ *
+ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
+ * by Robert Schwebel, December 2001 <robert@schwebel.de>
+ */
+
+#include <linux/config.h>
+#include <asm/segment.h>
+#include <linux/version.h>
+#include <linux/compile.h>
+#include <asm/boot.h>
+#include <asm/e820.h>
+#include <asm/page.h>
+
+/* Signature words to ensure LILO loaded us right */
+#define SIG1 0xAA55
+#define SIG2 0x5A5A
+
+INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
+SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
+SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
+ # ... and the former contents of CS
+
+DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
+
+.code16
+.globl begtext, begdata, begbss, endtext, enddata, endbss
+
+.text
+begtext:
+.data
+begdata:
+.bss
+begbss:
+.text
+
+start:
+ jmp trampoline
+
+# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
+
+ .ascii "HdrS" # header signature
+ .word 0x0203 # header version number (>= 0x0105)
+ # or else old loadlin-1.5 will fail)
+realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
+start_sys_seg: .word SYSSEG
+ .word kernel_version # pointing to kernel version string
+ # above section of header is compatible
+ # with loadlin-1.5 (header v1.5). Don't
+ # change it.
+
+type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
+ # Bootlin, SYSLX, bootsect...)
+ # See Documentation/i386/boot.txt for
+ # assigned ids
+
+# flags, unused bits must be zero (RFU) bit within loadflags
+loadflags:
+LOADED_HIGH = 1 # If set, the kernel is loaded high
+CAN_USE_HEAP = 0x80 # If set, the loader also has set
+ # heap_end_ptr to tell how much
+ # space behind setup.S can be used for
+ # heap purposes.
+ # Only the loader knows what is free
+#ifndef __BIG_KERNEL__
+ .byte 0
+#else
+ .byte LOADED_HIGH
+#endif
+
+setup_move_size: .word 0x8000 # size to move, when setup is not
+ # loaded at 0x90000. We will move setup
+ # to 0x90000 then just before jumping
+ # into the kernel. However, only the
+ # loader knows how much data behind
+ # us also needs to be loaded.
+
+code32_start: # here loaders can put a different
+ # start address for 32-bit code.
+#ifndef __BIG_KERNEL__
+ .long 0x1000 # 0x1000 = default for zImage
+#else
+ .long 0x100000 # 0x100000 = default for big kernel
+#endif
+
+ramdisk_image: .long 0 # address of loaded ramdisk image
+ # Here the loader puts the 32-bit
+ # address where it loaded the image.
+ # This only will be read by the kernel.
+
+ramdisk_size: .long 0 # its size in bytes
+
+bootsect_kludge:
+ .long 0 # obsolete
+
+heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
+ # space from here (exclusive) down to
+ # end of setup code can be used by setup
+ # for local heap purposes.
+
+pad1: .word 0
+cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
+ # If nonzero, a 32-bit pointer
+ # to the kernel command line.
+ # The command line should be
+ # located between the start of
+ # setup and the end of low
+ # memory (0xa0000), or it may
+ # get overwritten before it
+ # gets read. If this field is
+ # used, there is no longer
+ # anything magical about the
+ # 0x90000 segment; the setup
+ # can be located anywhere in
+ # low memory 0x10000 or higher.
+
+ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+ # (Header version 0x0203 or later)
+ # The highest safe address for
+ # the contents of an initrd
+
+trampoline: call start_of_setup
+ .align 16
+ # The offset at this point is 0x240
+ .space (0x7ff-0x240+1) # E820 & EDD space (ending at 0x7ff)
+# End of setup header #####################################################
+
+start_of_setup:
+# Bootlin depends on this being done early
+ movw $0x01500, %ax
+ movb $0x81, %dl
+ int $0x13
+
+#ifdef SAFE_RESET_DISK_CONTROLLER
+# Reset the disk controller.
+ movw $0x0000, %ax
+ movb $0x80, %dl
+ int $0x13
+#endif
+
+# Set %ds = %cs, we know that SETUPSEG = %cs at this point
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+# Check signature at end of setup
+ cmpw $SIG1, setup_sig1
+ jne bad_sig
+
+ cmpw $SIG2, setup_sig2
+ jne bad_sig
+
+ jmp good_sig1
+
+# Routine to print asciiz string at ds:si
+prtstr:
+ lodsb
+ andb %al, %al
+ jz fin
+
+ call prtchr
+ jmp prtstr
+
+fin: ret
+
+# Space printing
+prtsp2: call prtspc # Print double space
+prtspc: movb $0x20, %al # Print single space (note: fall-thru)
+
+# Part of above routine, this one just prints ascii al
+prtchr: pushw %ax
+ pushw %cx
+ movw $7,%bx
+ movw $0x01, %cx
+ movb $0x0e, %ah
+ int $0x10
+ popw %cx
+ popw %ax
+ ret
+
+beep: movb $0x07, %al
+ jmp prtchr
+
+no_sig_mess: .string "No setup signature found ..."
+
+good_sig1:
+ jmp good_sig
+
+# We now have to find the rest of the setup code/data
+bad_sig:
+ movw %cs, %ax # SETUPSEG
+ subw $DELTA_INITSEG, %ax # INITSEG
+ movw %ax, %ds
+ xorb %bh, %bh
+ movb (497), %bl # get setup sect from bootsect
+ subw $4, %bx # LILO loads 4 sectors of setup
+ shlw $8, %bx # convert to words (1sect=2^8 words)
+ movw %bx, %cx
+ shrw $3, %bx # convert to segment
+ addw $SYSSEG, %bx
+ movw %bx, %cs:start_sys_seg
+# Move rest of setup code/data to here
+ movw $2048, %di # four sectors loaded by LILO
+ subw %si, %si
+ pushw %cs
+ popw %es
+ movw $SYSSEG, %ax
+ movw %ax, %ds
+ rep
+ movsw
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+ cmpw $SIG1, setup_sig1
+ jne no_sig
+
+ cmpw $SIG2, setup_sig2
+ jne no_sig
+
+ jmp good_sig
+
+no_sig:
+ lea no_sig_mess, %si
+ call prtstr
+
+no_sig_loop:
+ hlt
+ jmp no_sig_loop
+
+good_sig:
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+# Check if an old loader tries to load a big-kernel
+ testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
+ jz loader_ok # No, no danger for old loaders.
+
+ cmpb $0, %cs:type_of_loader # Do we have a loader that
+ # can deal with us?
+ jnz loader_ok # Yes, continue.
+
+ pushw %cs # No, we have an old loader,
+ popw %ds # die.
+ lea loader_panic_mess, %si
+ call prtstr
+
+ jmp no_sig_loop
+
+loader_panic_mess: .string "Wrong loader, giving up..."
+
+loader_ok:
+# Get memory size (extended mem, kB)
+
+ xorl %eax, %eax
+ movl %eax, (0x1e0)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+ movb %al, (E820NR)
+# Try three different memory detection schemes. First, try
+# e820h, which lets us assemble a memory map, then try e801h,
+# which returns a 32-bit memory size, and finally 88h, which
+# returns 0-64m
+
+# method E820H:
+# the memory map from hell. e820h returns memory classified into
+# a whole bunch of different types, and allows memory holes and
+# everything. We scan through this memory map and build a list
+# of the first 32 memory areas, which we return at [E820MAP].
+# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
+
+#define SMAP 0x534d4150
+
+meme820:
+ xorl %ebx, %ebx # continuation counter
+ movw $E820MAP, %di # point into the whitelist
+ # so we can have the bios
+ # directly write into it.
+
+jmpe820:
+ movl $0x0000e820, %eax # e820, upper word zeroed
+ movl $SMAP, %edx # ascii 'SMAP'
+ movl $20, %ecx # size of the e820rec
+ pushw %ds # data record.
+ popw %es
+ int $0x15 # make the call
+ jc bail820 # fall to e801 if it fails
+
+ cmpl $SMAP, %eax # check the return is `SMAP'
+ jne bail820 # fall to e801 if it fails
+
+# cmpl $1, 16(%di) # is this usable memory?
+# jne again820
+
+ # If this is usable memory, we save it by simply advancing %di by
+ # sizeof(e820rec).
+ #
+good820:
+ movb (E820NR), %al # up to 32 entries
+ cmpb $E820MAX, %al
+ jnl bail820
+
+ incb (E820NR)
+ movw %di, %ax
+ addw $20, %ax
+ movw %ax, %di
+again820:
+ cmpl $0, %ebx # check to see if
+ jne jmpe820 # %ebx is set to EOF
+bail820:
+
+
+# method E801H:
+# memory size is in 1k chunksizes, to avoid confusing loadlin.
+# we store the 0xe801 memory size in a completely different place,
+# because it will most likely be longer than 16 bits.
+# (use 1e0 because that's what Larry Augustine uses in his
+# alternative new memory detection scheme, and it's sensible
+# to write everything into the same place.)
+
+meme801:
+ stc # fix to work around buggy
+ xorw %cx,%cx # BIOSes which dont clear/set
+ xorw %dx,%dx # carry on pass/error of
+ # e801h memory size call
+ # or merely pass cx,dx though
+ # without changing them.
+ movw $0xe801, %ax
+ int $0x15
+ jc mem88
+
+ cmpw $0x0, %cx # Kludge to handle BIOSes
+ jne e801usecxdx # which report their extended
+ cmpw $0x0, %dx # memory in AX/BX rather than
+ jne e801usecxdx # CX/DX. The spec I have read
+ movw %ax, %cx # seems to indicate AX/BX
+ movw %bx, %dx # are more reasonable anyway...
+
+e801usecxdx:
+ andl $0xffff, %edx # clear sign extend
+ shll $6, %edx # and go from 64k to 1k chunks
+ movl %edx, (0x1e0) # store extended memory size
+ andl $0xffff, %ecx # clear sign extend
+ addl %ecx, (0x1e0) # and add lower memory into
+ # total size.
+
+# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
+# 64mb, depending on the bios) in ax.
+mem88:
+
+#endif
+ movb $0x88, %ah
+ int $0x15
+ movw %ax, (2)
+
+# Set the keyboard repeat rate to the max
+ movw $0x0305, %ax
+ xorw %bx, %bx
+ int $0x16
+
+# Check for video adapter and its parameters and allow the
+# user to browse video modes.
+ call video # NOTE: we need %ds pointing
+ # to bootsector
+
+# Get hd0 data...
+ xorw %ax, %ax
+ movw %ax, %ds
+ ldsw (4 * 0x41), %si
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ pushw %ax
+ movw %ax, %es
+ movw $0x0080, %di
+ movw $0x10, %cx
+ pushw %cx
+ cld
+ rep
+ movsb
+# Get hd1 data...
+ xorw %ax, %ax
+ movw %ax, %ds
+ ldsw (4 * 0x46), %si
+ popw %cx
+ popw %es
+ movw $0x0090, %di
+ rep
+ movsb
+# Check that there IS a hd1 :-)
+ movw $0x01500, %ax
+ movb $0x81, %dl
+ int $0x13
+ jc no_disk1
+
+ cmpb $3, %ah
+ je is_disk1
+
+no_disk1:
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %es
+ movw $0x0090, %di
+ movw $0x10, %cx
+ xorw %ax, %ax
+ cld
+ rep
+ stosb
+is_disk1:
+# check for Micro Channel (MCA) bus
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+ xorw %ax, %ax
+ movw %ax, (0xa0) # set table length to 0
+ movb $0xc0, %ah
+ stc
+ int $0x15 # moves feature table to es:bx
+ jc no_mca
+
+ pushw %ds
+ movw %es, %ax
+ movw %ax, %ds
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %es
+ movw %bx, %si
+ movw $0xa0, %di
+ movw (%si), %cx
+ addw $2, %cx # table length is a short
+ cmpw $0x10, %cx
+ jc sysdesc_ok
+
+ movw $0x10, %cx # we keep only first 16 bytes
+sysdesc_ok:
+ rep
+ movsb
+ popw %ds
+no_mca:
+#ifdef CONFIG_X86_VOYAGER
+ movb $0xff, 0x40 # flag on config found
+ movb $0xc0, %al
+ mov $0xff, %ah
+ int $0x15 # put voyager config info at es:di
+ jc no_voyager
+ movw $0x40, %si # place voyager info in apm table
+ cld
+ movw $7, %cx
+voyager_rep:
+ movb %es:(%di), %al
+ movb %al,(%si)
+ incw %di
+ incw %si
+ decw %cx
+ jnz voyager_rep
+no_voyager:
+#endif
+# Check for PS/2 pointing device
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+ movw $0, (0x1ff) # default is no pointing device
+ int $0x11 # int 0x11: equipment list
+ testb $0x04, %al # check if mouse installed
+ jz no_psmouse
+
+ movw $0xAA, (0x1ff) # device present
+no_psmouse:
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+ movl $0x0000E980, %eax # IST Support
+ movl $0x47534943, %edx # Request value
+ int $0x15
+
+ movl %eax, (96)
+ movl %ebx, (100)
+ movl %ecx, (104)
+ movl %edx, (108)
+#endif
+
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+# Then check for an APM BIOS...
+ # %ds points to the bootsector
+ movw $0, 0x40 # version = 0 means no APM BIOS
+ movw $0x05300, %ax # APM BIOS installation check
+ xorw %bx, %bx
+ int $0x15
+ jc done_apm_bios # Nope, no APM BIOS
+
+ cmpw $0x0504d, %bx # Check for "PM" signature
+ jne done_apm_bios # No signature, no APM BIOS
+
+ andw $0x02, %cx # Is 32 bit supported?
+ je done_apm_bios # No 32-bit, no (good) APM BIOS
+
+ movw $0x05304, %ax # Disconnect first just in case
+ xorw %bx, %bx
+ int $0x15 # ignore return code
+ movw $0x05303, %ax # 32 bit connect
+ xorl %ebx, %ebx
+ xorw %cx, %cx # paranoia :-)
+ xorw %dx, %dx # ...
+ xorl %esi, %esi # ...
+ xorw %di, %di # ...
+ int $0x15
+ jc no_32_apm_bios # Ack, error.
+
+ movw %ax, (66) # BIOS code segment
+ movl %ebx, (68) # BIOS entry point offset
+ movw %cx, (72) # BIOS 16 bit code segment
+ movw %dx, (74) # BIOS data segment
+ movl %esi, (78) # BIOS code segment lengths
+ movw %di, (82) # BIOS data segment length
+# Redo the installation check as the 32 bit connect
+# modifies the flags returned on some BIOSs
+ movw $0x05300, %ax # APM BIOS installation check
+ xorw %bx, %bx
+ xorw %cx, %cx # paranoia
+ int $0x15
+ jc apm_disconnect # error -> shouldn't happen
+
+ cmpw $0x0504d, %bx # check for "PM" signature
+ jne apm_disconnect # no sig -> shouldn't happen
+
+ movw %ax, (64) # record the APM BIOS version
+ movw %cx, (76) # and flags
+ jmp done_apm_bios
+
+apm_disconnect: # Tidy up
+ movw $0x05304, %ax # Disconnect
+ xorw %bx, %bx
+ int $0x15 # ignore return code
+
+ jmp done_apm_bios
+
+no_32_apm_bios:
+ andw $0xfffd, (76) # remove 32 bit support bit
+done_apm_bios:
+#endif
+
+#include "edd.S"
+
+# Now we want to move to protected mode ...
+ cmpw $0, %cs:realmode_swtch
+ jz rmodeswtch_normal
+
+ lcall *%cs:realmode_swtch
+
+ jmp rmodeswtch_end
+
+rmodeswtch_normal:
+ pushw %cs
+ call default_switch
+
+rmodeswtch_end:
+# we get the code32 start address and modify the below 'jmpi'
+# (loader may have changed it)
+ movl %cs:code32_start, %eax
+ movl %eax, %cs:code32
+
+# Now we move the system to its rightful place ... but we check if we have a
+# big-kernel. In that case we *must* not move it ...
+ testb $LOADED_HIGH, %cs:loadflags
+ jz do_move0 # .. then we have a normal low
+ # loaded zImage
+ # .. or else we have a high
+ # loaded bzImage
+ jmp end_move # ... and we skip moving
+
+do_move0:
+ movw $0x100, %ax # start of destination segment
+ movw %cs, %bp # aka SETUPSEG
+ subw $DELTA_INITSEG, %bp # aka INITSEG
+ movw %cs:start_sys_seg, %bx # start of source segment
+ cld
+do_move:
+ movw %ax, %es # destination segment
+ incb %ah # instead of add ax,#0x100
+ movw %bx, %ds # source segment
+ addw $0x100, %bx
+ subw %di, %di
+ subw %si, %si
+ movw $0x800, %cx
+ rep
+ movsw
+ cmpw %bp, %bx # assume start_sys_seg > 0x200,
+ # so we will perhaps read one
+ # page more than needed, but
+ # never overwrite INITSEG
+ # because destination is a
+ # minimum one page below source
+ jb do_move
+
+end_move:
+# then we load the segment descriptors
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+
+# Check whether we need to be downward compatible with version <=201
+ cmpl $0, cmd_line_ptr
+ jne end_move_self # loader uses version >=202 features
+ cmpb $0x20, type_of_loader
+ je end_move_self # bootsect loader, we know of it
+
+# Boot loader doesnt support boot protocol version 2.02.
+# If we have our code not at 0x90000, we need to move it there now.
+# We also then need to move the params behind it (commandline)
+# Because we would overwrite the code on the current IP, we move
+# it in two steps, jumping high after the first one.
+ movw %cs, %ax
+ cmpw $SETUPSEG, %ax
+ je end_move_self
+
+ cli # make sure we really have
+ # interrupts disabled !
+ # because after this the stack
+ # should not be used
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ss, %dx
+ cmpw %ax, %dx
+ jb move_self_1
+
+ addw $INITSEG, %dx
+ subw %ax, %dx # this will go into %ss after
+ # the move
+move_self_1:
+ movw %ax, %ds
+ movw $INITSEG, %ax # real INITSEG
+ movw %ax, %es
+ movw %cs:setup_move_size, %cx
+ std # we have to move up, so we use
+ # direction down because the
+ # areas may overlap
+ movw %cx, %di
+ decw %di
+ movw %di, %si
+ subw $move_self_here+0x200, %cx
+ rep
+ movsb
+ ljmp $SETUPSEG, $move_self_here
+
+move_self_here:
+ movw $move_self_here+0x200, %cx
+ rep
+ movsb
+ movw $SETUPSEG, %ax
+ movw %ax, %ds
+ movw %dx, %ss
+end_move_self: # now we are at the right place
+
+#
+# Enable A20. This is at the very best an annoying procedure.
+# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
+# AMD Elan bug fix by Robert Schwebel.
+#
+
+#if defined(CONFIG_X86_ELAN)
+ movb $0x02, %al # alternate A20 gate
+ outb %al, $0x92 # this works on SC410/SC520
+a20_elan_wait:
+ call a20_test
+ jz a20_elan_wait
+ jmp a20_done
+#endif
+
+
+A20_TEST_LOOPS = 32 # Iterations per wait
+A20_ENABLE_LOOPS = 255 # Total loops to try
+
+
+#ifndef CONFIG_X86_VOYAGER
+a20_try_loop:
+
+ # First, see if we are on a system with no A20 gate.
+a20_none:
+ call a20_test
+ jnz a20_done
+
+ # Next, try the BIOS (INT 0x15, AX=0x2401)
+a20_bios:
+ movw $0x2401, %ax
+ pushfl # Be paranoid about flags
+ int $0x15
+ popfl
+
+ call a20_test
+ jnz a20_done
+
+ # Try enabling A20 through the keyboard controller
+#endif /* CONFIG_X86_VOYAGER */
+a20_kbc:
+ call empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+ call a20_test # Just in case the BIOS worked
+ jnz a20_done # but had a delayed reaction.
+#endif
+
+ movb $0xD1, %al # command write
+ outb %al, $0x64
+ call empty_8042
+
+ movb $0xDF, %al # A20 on
+ outb %al, $0x60
+ call empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+ # Wait until a20 really *is* enabled; it can take a fair amount of
+ # time on certain systems; Toshiba Tecras are known to have this
+ # problem.
+a20_kbc_wait:
+ xorw %cx, %cx
+a20_kbc_wait_loop:
+ call a20_test
+ jnz a20_done
+ loop a20_kbc_wait_loop
+
+ # Final attempt: use "configuration port A"
+a20_fast:
+ inb $0x92, %al # Configuration Port A
+ orb $0x02, %al # "fast A20" version
+ andb $0xFE, %al # don't accidentally reset
+ outb %al, $0x92
+
+ # Wait for configuration port A to take effect
+a20_fast_wait:
+ xorw %cx, %cx
+a20_fast_wait_loop:
+ call a20_test
+ jnz a20_done
+ loop a20_fast_wait_loop
+
+ # A20 is still not responding. Try frobbing it again.
+ #
+ decb (a20_tries)
+ jnz a20_try_loop
+
+ movw $a20_err_msg, %si
+ call prtstr
+
+a20_die:
+ hlt
+ jmp a20_die
+
+a20_tries:
+ .byte A20_ENABLE_LOOPS
+
+a20_err_msg:
+ .ascii "linux: fatal error: A20 gate not responding!"
+ .byte 13, 10, 0
+
+ # If we get here, all is good
+a20_done:
+
+#endif /* CONFIG_X86_VOYAGER */
+# set up gdt and idt
+ lidt idt_48 # load idt with 0,0
+ xorl %eax, %eax # Compute gdt_base
+ movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
+ shll $4, %eax
+ addl $gdt, %eax
+ movl %eax, (gdt_48+2)
+ lgdt gdt_48 # load gdt with whatever is
+ # appropriate
+
+# make sure any possible coprocessor is properly reset..
+ xorw %ax, %ax
+ outb %al, $0xf0
+ call delay
+
+ outb %al, $0xf1
+ call delay
+
+# well, that went ok, I hope. Now we mask all interrupts - the rest
+# is done in init_IRQ().
+ movb $0xFF, %al # mask all interrupts for now
+ outb %al, $0xA1
+ call delay
+
+ movb $0xFB, %al # mask all irq's but irq2 which
+ outb %al, $0x21 # is cascaded
+
+# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
+# need no steenking BIOS anyway (except for the initial loading :-).
+# The BIOS-routine wants lots of unnecessary data, and it's less
+# "interesting" anyway. This is how REAL programmers do it.
+#
+# Well, now's the time to actually move into protected mode. To make
+# things as simple as possible, we do no register set-up or anything,
+# we let the gnu-compiled 32-bit programs do that. We just jump to
+# absolute address 0x1000 (or the loader supplied one),
+# in 32-bit protected mode.
+#
+# Note that the short jump isn't strictly needed, although there are
+# reasons why it might be a good idea. It won't hurt in any case.
+ movw $1, %ax # protected mode (PE) bit
+ lmsw %ax # This is it!
+ jmp flush_instr
+
+flush_instr:
+ xorw %bx, %bx # Flag to indicate a boot
+ xorl %esi, %esi # Pointer to real-mode code
+ movw %cs, %si
+ subw $DELTA_INITSEG, %si
+ shll $4, %esi # Convert to 32-bit pointer
+
+# jump to startup_32 in arch/i386/boot/compressed/head.S
+#
+# NOTE: For high loaded big kernels we need a
+# jmpi 0x100000,__BOOT_CS
+#
+# but we yet haven't reloaded the CS register, so the default size
+# of the target offset still is 16 bit.
+# However, using an operand prefix (0x66), the CPU will properly
+# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
+# Manual, Mixing 16-bit and 32-bit code, page 16-6)
+
+ .byte 0x66, 0xea # prefix + jmpi-opcode
+code32: .long 0x1000 # will be set to 0x100000
+ # for big kernels
+ .word __BOOT_CS
+
+# Here's a bunch of information about your current kernel..
+kernel_version: .ascii UTS_RELEASE
+ .ascii " ("
+ .ascii LINUX_COMPILE_BY
+ .ascii "@"
+ .ascii LINUX_COMPILE_HOST
+ .ascii ") "
+ .ascii UTS_VERSION
+ .byte 0
+
+# This is the default real mode switch routine.
+# to be called just before protected mode transition
+default_switch:
+ cli # no interrupts allowed !
+ movb $0x80, %al # disable NMI for bootup
+ # sequence
+ outb %al, $0x70
+ lret
+
+
+#ifndef CONFIG_X86_VOYAGER
+# This routine tests whether or not A20 is enabled. If so, it
+# exits with zf = 0.
+#
+# The memory address used, 0x200, is the int $0x80 vector, which
+# should be safe.
+
+A20_TEST_ADDR = 4*0x80
+
+a20_test:
+ pushw %cx
+ pushw %ax
+ xorw %cx, %cx
+ movw %cx, %fs # Low memory
+ decw %cx
+ movw %cx, %gs # High memory area
+ movw $A20_TEST_LOOPS, %cx
+ movw %fs:(A20_TEST_ADDR), %ax
+ pushw %ax
+a20_test_wait:
+ incw %ax
+ movw %ax, %fs:(A20_TEST_ADDR)
+ call delay # Serialize and make delay constant
+ cmpw %gs:(A20_TEST_ADDR+0x10), %ax
+ loope a20_test_wait
+
+ popw %fs:(A20_TEST_ADDR)
+ popw %ax
+ popw %cx
+ ret
+
+#endif /* CONFIG_X86_VOYAGER */
+
+# This routine checks that the keyboard command queue is empty
+# (after emptying the output buffers)
+#
+# Some machines have delusions that the keyboard buffer is always full
+# with no keyboard attached...
+#
+# If there is no keyboard controller, we will usually get 0xff
+# to all the reads. With each IO taking a microsecond and
+# a timeout of 100,000 iterations, this can take about half a
+# second ("delay" == outb to port 0x80). That should be ok,
+# and should also be plenty of time for a real keyboard controller
+# to empty.
+#
+
+empty_8042:
+ pushl %ecx
+ movl $100000, %ecx
+
+empty_8042_loop:
+ decl %ecx
+ jz empty_8042_end_loop
+
+ call delay
+
+ inb $0x64, %al # 8042 status port
+ testb $1, %al # output buffer?
+ jz no_output
+
+ call delay
+ inb $0x60, %al # read it
+ jmp empty_8042_loop
+
+no_output:
+ testb $2, %al # is input buffer full?
+ jnz empty_8042_loop # yes - loop
+empty_8042_end_loop:
+ popl %ecx
+ ret
+
+# Read the cmos clock. Return the seconds in al
+gettime:
+ pushw %cx
+ movb $0x02, %ah
+ int $0x1a
+ movb %dh, %al # %dh contains the seconds
+ andb $0x0f, %al
+ movb %dh, %ah
+ movb $0x04, %cl
+ shrb %cl, %ah
+ aad
+ popw %cx
+ ret
+
+# Delay is needed after doing I/O
+delay:
+ outb %al,$0x80
+ ret
+
+# Descriptor tables
+#
+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
+# efficiency reasons. However, there are machines which are known not
+# to boot with misaligned GDTs, so alter this at your peril! If you alter
+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
+# empty GDT entries (one for NULL and one reserved).
+#
+# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
+# true for the Voyager Quad CPU card which will not boot without
+# This directive. 16 byte aligment is recommended by intel.
+#
+ .align 16
+gdt:
+ .fill GDT_ENTRY_BOOT_CS,8,0
+
+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
+ .word 0 # base address = 0
+ .word 0x9A00 # code read/exec
+ .word 0x00CF # granularity = 4096, 386
+ # (+5th nibble of limit)
+
+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
+ .word 0 # base address = 0
+ .word 0x9200 # data read/write
+ .word 0x00CF # granularity = 4096, 386
+ # (+5th nibble of limit)
+gdt_end:
+ .align 4
+
+ .word 0 # alignment byte
+idt_48:
+ .word 0 # idt limit = 0
+ .word 0, 0 # idt base = 0L
+
+ .word 0 # alignment byte
+gdt_48:
+ .word gdt_end - gdt - 1 # gdt limit
+ .word 0, 0 # gdt base (filled in later)
+
+# Include video setup & detection code
+
+#include "video.S"
+
+# Setup signature -- must be last
+setup_sig1: .word SIG1
+setup_sig2: .word SIG2
+
+# After this point, there is some free space which is used by the video mode
+# handling code to store the temporary mode table (not used by the kernel).
+
+modelist:
+
+.text
+endtext:
+.data
+enddata:
+.bss
+endbss:
diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c
new file mode 100644
index 0000000..26509b8
--- /dev/null
+++ b/arch/i386/boot/tools/build.c
@@ -0,0 +1,184 @@
+/*
+ * $Id: build.c,v 1.5 1997/05/19 12:29:58 mj Exp $
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ * Rewritten by Martin Mares, April 1997
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <asm/boot.h>
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long u32;
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* Minimal number of setup sectors (see also bootsect.S) */
+#define SETUP_SECTS 4
+
+byte buf[1024];
+int fd;
+int is_big_kernel;
+
+void die(const char * str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ if ((fd = open(name, O_RDONLY, 0)) < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+void usage(void)
+{
+ die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char ** argv)
+{
+ unsigned int i, c, sz, setup_sectors;
+ u32 sys_size;
+ byte major_root, minor_root;
+ struct stat sb;
+
+ if (argc > 2 && !strcmp(argv[1], "-b"))
+ {
+ is_big_kernel = 1;
+ argc--, argv++;
+ }
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+
+ file_open(argv[1]);
+ i = read(fd, buf, sizeof(buf));
+ fprintf(stderr,"Boot sector %d bytes.\n",i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if (buf[510] != 0x55 || buf[511] != 0xaa)
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = minor_root;
+ buf[509] = major_root;
+ if (write(1, buf, 512) != 512)
+ die("Write call failed");
+ close (fd);
+
+ file_open(argv[2]); /* Copy the setup code */
+ for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ if (c != 0)
+ die("read-error on `setup'");
+ close (fd);
+
+ setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
+ /* for compatibility with ancient versions of LILO. */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr, "Setup is %d bytes.\n", i);
+ memset(buf, 0, sizeof(buf));
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ file_open(argv[3]);
+ if (fstat (fd, &sb))
+ die("Unable to stat `%s': %m", argv[3]);
+ sz = sb.st_size;
+ fprintf (stderr, "System is %d kB\n", sz/1024);
+ sys_size = (sz + 15) / 16;
+ if (!is_big_kernel && sys_size > DEF_SYSSIZE)
+ die("System is too big. Try using bzImage or modules.");
+ while (sz > 0) {
+ int l, n;
+
+ l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
+ if ((n=read(fd, buf, l)) != l) {
+ if (n < 0)
+ die("Error reading %s: %m", argv[3]);
+ else
+ die("%s: Unexpected EOF", argv[3]);
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(fd);
+
+ if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
+ die("Output: seek failed");
+ buf[0] = setup_sectors;
+ if (write(1, buf, 1) != 1)
+ die("Write of setup sector count failed");
+ if (lseek(1, 500, SEEK_SET) != 500)
+ die("Output: seek failed");
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write of image length failed");
+
+ return 0; /* Everything is OK */
+}
diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S
new file mode 100644
index 0000000..925d3f5
--- /dev/null
+++ b/arch/i386/boot/video.S
@@ -0,0 +1,2007 @@
+/* video.S
+ *
+ * Display adapter & video mode setup, version 2.13 (14-May-99)
+ *
+ * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
+ * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
+ *
+ * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
+ *
+ * For further information, look at Documentation/svga.txt.
+ *
+ */
+
+#include <linux/config.h> /* for CONFIG_VIDEO_* */
+
+/* Enable autodetection of SVGA adapters and modes. */
+#undef CONFIG_VIDEO_SVGA
+
+/* Enable autodetection of VESA modes */
+#define CONFIG_VIDEO_VESA
+
+/* Enable compacting of mode table */
+#define CONFIG_VIDEO_COMPACT
+
+/* Retain screen contents when switching modes */
+#define CONFIG_VIDEO_RETAIN
+
+/* Enable local mode list */
+#undef CONFIG_VIDEO_LOCAL
+
+/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
+#undef CONFIG_VIDEO_400_HACK
+
+/* Hack that lets you force specific BIOS mode ID and specific dimensions */
+#undef CONFIG_VIDEO_GFX_HACK
+#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */
+#define VIDEO_GFX_BIOS_BX 0x0102
+#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+/* Special video modes */
+#define VIDEO_FIRST_SPECIAL 0x0f00
+#define VIDEO_80x25 0x0f00
+#define VIDEO_8POINT 0x0f01
+#define VIDEO_80x43 0x0f02
+#define VIDEO_80x28 0x0f03
+#define VIDEO_CURRENT_MODE 0x0f04
+#define VIDEO_80x30 0x0f05
+#define VIDEO_80x34 0x0f06
+#define VIDEO_80x60 0x0f07
+#define VIDEO_GFX_HACK 0x0f08
+#define VIDEO_LAST_SPECIAL 0x0f09
+
+/* Video modes given by resolution */
+#define VIDEO_FIRST_RESOLUTION 0x1000
+
+/* The "recalculate timings" flag */
+#define VIDEO_RECALC 0x8000
+
+/* Positions of various video parameters passed to the kernel */
+/* (see also include/linux/tty.h) */
+#define PARAM_CURSOR_POS 0x00
+#define PARAM_VIDEO_PAGE 0x04
+#define PARAM_VIDEO_MODE 0x06
+#define PARAM_VIDEO_COLS 0x07
+#define PARAM_VIDEO_EGA_BX 0x0a
+#define PARAM_VIDEO_LINES 0x0e
+#define PARAM_HAVE_VGA 0x0f
+#define PARAM_FONT_POINTS 0x10
+
+#define PARAM_LFB_WIDTH 0x12
+#define PARAM_LFB_HEIGHT 0x14
+#define PARAM_LFB_DEPTH 0x16
+#define PARAM_LFB_BASE 0x18
+#define PARAM_LFB_SIZE 0x1c
+#define PARAM_LFB_LINELENGTH 0x24
+#define PARAM_LFB_COLORS 0x26
+#define PARAM_VESAPM_SEG 0x2e
+#define PARAM_VESAPM_OFF 0x30
+#define PARAM_LFB_PAGES 0x32
+#define PARAM_VESA_ATTRIB 0x34
+
+/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
+#ifdef CONFIG_VIDEO_RETAIN
+#define DO_STORE call store_screen
+#else
+#define DO_STORE
+#endif /* CONFIG_VIDEO_RETAIN */
+
+# This is the main entry point called by setup.S
+# %ds *must* be pointing to the bootsector
+video: pushw %ds # We use different segments
+ pushw %ds # FS contains original DS
+ popw %fs
+ pushw %cs # DS is equal to CS
+ popw %ds
+ pushw %cs # ES is equal to CS
+ popw %es
+ xorw %ax, %ax
+ movw %ax, %gs # GS is zero
+ cld
+ call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA)
+#ifdef CONFIG_VIDEO_SELECT
+ movw %fs:(0x01fa), %ax # User selected video mode
+ cmpw $ASK_VGA, %ax # Bring up the menu
+ jz vid2
+
+ call mode_set # Set the mode
+ jc vid1
+
+ leaw badmdt, %si # Invalid mode ID
+ call prtstr
+vid2: call mode_menu
+vid1:
+#ifdef CONFIG_VIDEO_RETAIN
+ call restore_screen # Restore screen contents
+#endif /* CONFIG_VIDEO_RETAIN */
+ call store_edid
+#endif /* CONFIG_VIDEO_SELECT */
+ call mode_params # Store mode parameters
+ popw %ds # Restore original DS
+ ret
+
+# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
+basic_detect:
+ movb $0, %fs:(PARAM_HAVE_VGA)
+ movb $0x12, %ah # Check EGA/VGA
+ movb $0x10, %bl
+ int $0x10
+ movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel
+ cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card.
+ je basret
+
+ incb adapter
+ movw $0x1a00, %ax # Check EGA or VGA?
+ int $0x10
+ cmpb $0x1a, %al # 1a means VGA...
+ jne basret # anything else is EGA.
+
+ incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA
+ incb adapter
+basret: ret
+
+# Store the video mode parameters for later usage by the kernel.
+# This is done by asking the BIOS except for the rows/columns
+# parameters in the default 80x25 mode -- these are set directly,
+# because some very obscure BIOSes supply insane values.
+mode_params:
+#ifdef CONFIG_VIDEO_SELECT
+ cmpb $0, graphic_mode
+ jnz mopar_gr
+#endif
+ movb $0x03, %ah # Read cursor position
+ xorb %bh, %bh
+ int $0x10
+ movw %dx, %fs:(PARAM_CURSOR_POS)
+ movb $0x0f, %ah # Read page/mode/width
+ int $0x10
+ movw %bx, %fs:(PARAM_VIDEO_PAGE)
+ movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width
+ cmpb $0x7, %al # MDA/HGA => segment differs
+ jnz mopar0
+
+ movw $0xb000, video_segment
+mopar0: movw %gs:(0x485), %ax # Font size
+ movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA)
+ movw force_size, %ax # Forced size?
+ orw %ax, %ax
+ jz mopar1
+
+ movb %ah, %fs:(PARAM_VIDEO_COLS)
+ movb %al, %fs:(PARAM_VIDEO_LINES)
+ ret
+
+mopar1: movb $25, %al
+ cmpb $0, adapter # If we are on CGA/MDA/HGA, the
+ jz mopar2 # screen must have 25 lines.
+
+ movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS
+ incb %al # location of max lines.
+mopar2: movb %al, %fs:(PARAM_VIDEO_LINES)
+ ret
+
+#ifdef CONFIG_VIDEO_SELECT
+# Fetching of VESA frame buffer parameters
+mopar_gr:
+ leaw modelist+1024, %di
+ movb $0x23, %fs:(PARAM_HAVE_VGA)
+ movw 16(%di), %ax
+ movw %ax, %fs:(PARAM_LFB_LINELENGTH)
+ movw 18(%di), %ax
+ movw %ax, %fs:(PARAM_LFB_WIDTH)
+ movw 20(%di), %ax
+ movw %ax, %fs:(PARAM_LFB_HEIGHT)
+ movb 25(%di), %al
+ movb $0, %ah
+ movw %ax, %fs:(PARAM_LFB_DEPTH)
+ movb 29(%di), %al
+ movb $0, %ah
+ movw %ax, %fs:(PARAM_LFB_PAGES)
+ movl 40(%di), %eax
+ movl %eax, %fs:(PARAM_LFB_BASE)
+ movl 31(%di), %eax
+ movl %eax, %fs:(PARAM_LFB_COLORS)
+ movl 35(%di), %eax
+ movl %eax, %fs:(PARAM_LFB_COLORS+4)
+ movw 0(%di), %ax
+ movw %ax, %fs:(PARAM_VESA_ATTRIB)
+
+# get video mem size
+ leaw modelist+1024, %di
+ movw $0x4f00, %ax
+ int $0x10
+ xorl %eax, %eax
+ movw 18(%di), %ax
+ movl %eax, %fs:(PARAM_LFB_SIZE)
+
+# switching the DAC to 8-bit is for <= 8 bpp only
+ movw %fs:(PARAM_LFB_DEPTH), %ax
+ cmpw $8, %ax
+ jg dac_done
+
+# get DAC switching capability
+ xorl %eax, %eax
+ movb 10(%di), %al
+ testb $1, %al
+ jz dac_set
+
+# attempt to switch DAC to 8-bit
+ movw $0x4f08, %ax
+ movw $0x0800, %bx
+ int $0x10
+ cmpw $0x004f, %ax
+ jne dac_set
+ movb %bh, dac_size # store actual DAC size
+
+dac_set:
+# set color size to DAC size
+ movb dac_size, %al
+ movb %al, %fs:(PARAM_LFB_COLORS+0)
+ movb %al, %fs:(PARAM_LFB_COLORS+2)
+ movb %al, %fs:(PARAM_LFB_COLORS+4)
+ movb %al, %fs:(PARAM_LFB_COLORS+6)
+
+# set color offsets to 0
+ movb $0, %fs:(PARAM_LFB_COLORS+1)
+ movb $0, %fs:(PARAM_LFB_COLORS+3)
+ movb $0, %fs:(PARAM_LFB_COLORS+5)
+ movb $0, %fs:(PARAM_LFB_COLORS+7)
+
+dac_done:
+# get protected mode interface informations
+ movw $0x4f0a, %ax
+ xorw %bx, %bx
+ xorw %di, %di
+ int $0x10
+ cmp $0x004f, %ax
+ jnz no_pm
+
+ movw %es, %fs:(PARAM_VESAPM_SEG)
+ movw %di, %fs:(PARAM_VESAPM_OFF)
+no_pm: ret
+
+# The video mode menu
+mode_menu:
+ leaw keymsg, %si # "Return/Space/Timeout" message
+ call prtstr
+ call flush
+nokey: call getkt
+
+ cmpb $0x0d, %al # ENTER ?
+ je listm # yes - manual mode selection
+
+ cmpb $0x20, %al # SPACE ?
+ je defmd1 # no - repeat
+
+ call beep
+ jmp nokey
+
+defmd1: ret # No mode chosen? Default 80x25
+
+listm: call mode_table # List mode table
+listm0: leaw name_bann, %si # Print adapter name
+ call prtstr
+ movw card_name, %si
+ orw %si, %si
+ jnz an2
+
+ movb adapter, %al
+ leaw old_name, %si
+ orb %al, %al
+ jz an1
+
+ leaw ega_name, %si
+ decb %al
+ jz an1
+
+ leaw vga_name, %si
+ jmp an1
+
+an2: call prtstr
+ leaw svga_name, %si
+an1: call prtstr
+ leaw listhdr, %si # Table header
+ call prtstr
+ movb $0x30, %dl # DL holds mode number
+ leaw modelist, %si
+lm1: cmpw $ASK_VGA, (%si) # End?
+ jz lm2
+
+ movb %dl, %al # Menu selection number
+ call prtchr
+ call prtsp2
+ lodsw
+ call prthw # Mode ID
+ call prtsp2
+ movb 0x1(%si), %al
+ call prtdec # Rows
+ movb $0x78, %al # the letter 'x'
+ call prtchr
+ lodsw
+ call prtdec # Columns
+ movb $0x0d, %al # New line
+ call prtchr
+ movb $0x0a, %al
+ call prtchr
+ incb %dl # Next character
+ cmpb $0x3a, %dl
+ jnz lm1
+
+ movb $0x61, %dl
+ jmp lm1
+
+lm2: leaw prompt, %si # Mode prompt
+ call prtstr
+ leaw edit_buf, %di # Editor buffer
+lm3: call getkey
+ cmpb $0x0d, %al # Enter?
+ jz lment
+
+ cmpb $0x08, %al # Backspace?
+ jz lmbs
+
+ cmpb $0x20, %al # Printable?
+ jc lm3
+
+ cmpw $edit_buf+4, %di # Enough space?
+ jz lm3
+
+ stosb
+ call prtchr
+ jmp lm3
+
+lmbs: cmpw $edit_buf, %di # Backspace
+ jz lm3
+
+ decw %di
+ movb $0x08, %al
+ call prtchr
+ call prtspc
+ movb $0x08, %al
+ call prtchr
+ jmp lm3
+
+lment: movb $0, (%di)
+ leaw crlft, %si
+ call prtstr
+ leaw edit_buf, %si
+ cmpb $0, (%si) # Empty string = default mode
+ jz lmdef
+
+ cmpb $0, 1(%si) # One character = menu selection
+ jz mnusel
+
+ cmpw $0x6373, (%si) # "scan" => mode scanning
+ jnz lmhx
+
+ cmpw $0x6e61, 2(%si)
+ jz lmscan
+
+lmhx: xorw %bx, %bx # Else => mode ID in hex
+lmhex: lodsb
+ orb %al, %al
+ jz lmuse1
+
+ subb $0x30, %al
+ jc lmbad
+
+ cmpb $10, %al
+ jc lmhx1
+
+ subb $7, %al
+ andb $0xdf, %al
+ cmpb $10, %al
+ jc lmbad
+
+ cmpb $16, %al
+ jnc lmbad
+
+lmhx1: shlw $4, %bx
+ orb %al, %bl
+ jmp lmhex
+
+lmuse1: movw %bx, %ax
+ jmp lmuse
+
+mnusel: lodsb # Menu selection
+ xorb %ah, %ah
+ subb $0x30, %al
+ jc lmbad
+
+ cmpb $10, %al
+ jc lmuse
+
+ cmpb $0x61-0x30, %al
+ jc lmbad
+
+ subb $0x61-0x30-10, %al
+ cmpb $36, %al
+ jnc lmbad
+
+lmuse: call mode_set
+ jc lmdef
+
+lmbad: leaw unknt, %si
+ call prtstr
+ jmp lm2
+lmscan: cmpb $0, adapter # Scanning only on EGA/VGA
+ jz lmbad
+
+ movw $0, mt_end # Scanning of modes is
+ movb $1, scanning # done as new autodetection.
+ call mode_table
+ jmp listm0
+lmdef: ret
+
+# Additional parts of mode_set... (relative jumps, you know)
+setv7: # Video7 extended modes
+ DO_STORE
+ subb $VIDEO_FIRST_V7>>8, %bh
+ movw $0x6f05, %ax
+ int $0x10
+ stc
+ ret
+
+_setrec: jmp setrec # Ugly...
+_set_80x25: jmp set_80x25
+
+# Aliases for backward compatibility.
+setalias:
+ movw $VIDEO_80x25, %ax
+ incw %bx
+ jz mode_set
+
+ movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
+ incw %bx
+ jnz setbad # Fall-through!
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+ movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S
+ movw %ax, %bx
+ cmpb $0xff, %ah
+ jz setalias
+
+ testb $VIDEO_RECALC>>8, %ah
+ jnz _setrec
+
+ cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
+ jnc setres
+
+ cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
+ jz setspc
+
+ cmpb $VIDEO_FIRST_V7>>8, %ah
+ jz setv7
+
+ cmpb $VIDEO_FIRST_VESA>>8, %ah
+ jnc check_vesa
+
+ orb %ah, %ah
+ jz setmenu
+
+ decb %ah
+ jz setbios
+
+setbad: clc
+ movb $0, do_restore # The screen needn't be restored
+ ret
+
+setvesa:
+ DO_STORE
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz setbad # AH=0 if OK
+
+ stc
+ ret
+
+setbios:
+ DO_STORE
+ int $0x10 # Standard BIOS mode set call
+ pushw %bx
+ movb $0x0f, %ah # Check if really set
+ int $0x10
+ popw %bx
+ cmpb %bl, %al
+ jnz setbad
+
+ stc
+ ret
+
+setspc: xorb %bh, %bh # Set special mode
+ cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
+ jnc setbad
+
+ addw %bx, %bx
+ jmp *spec_inits(%bx)
+
+setmenu:
+ orb %al, %al # 80x25 is an exception
+ jz _set_80x25
+
+ pushw %bx # Set mode chosen from menu
+ call mode_table # Build the mode table
+ popw %ax
+ shlw $2, %ax
+ addw %ax, %si
+ cmpw %di, %si
+ jnc setbad
+
+ movw (%si), %ax # Fetch mode ID
+_m_s: jmp mode_set
+
+setres: pushw %bx # Set mode chosen by resolution
+ call mode_table
+ popw %bx
+ xchgb %bl, %bh
+setr1: lodsw
+ cmpw $ASK_VGA, %ax # End of the list?
+ jz setbad
+
+ lodsw
+ cmpw %bx, %ax
+ jnz setr1
+
+ movw -4(%si), %ax # Fetch mode ID
+ jmp _m_s
+
+check_vesa:
+ leaw modelist+1024, %di
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ movw %bx, %cx # Get mode information structure
+ movw $0x4f01, %ax
+ int $0x10
+ addb $VIDEO_FIRST_VESA>>8, %bh
+ cmpw $0x004f, %ax
+ jnz setbad
+
+ movb (%di), %al # Check capabilities.
+ andb $0x19, %al
+ cmpb $0x09, %al
+ jz setvesa # This is a text mode
+
+ movb (%di), %al # Check capabilities.
+ andb $0x99, %al
+ cmpb $0x99, %al
+ jnz _setbad # Doh! No linear frame buffer.
+
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz _setbad # AH=0 if OK
+
+ movb $1, graphic_mode # flag graphic mode
+ movb $0, do_restore # no screen restore
+ stc
+ ret
+
+_setbad: jmp setbad # Ugly...
+
+# Recalculate vertical display end registers -- this fixes various
+# inconsistencies of extended modes on many adapters. Called when
+# the VIDEO_RECALC flag is set in the mode ID.
+
+setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode
+ call mode_set
+ jnc rct3
+
+ movw %gs:(0x485), %ax # Font size in pixels
+ movb %gs:(0x484), %bl # Number of rows
+ incb %bl
+ mulb %bl # Number of visible
+ decw %ax # scan lines - 1
+ movw $0x3d4, %dx
+ movw %ax, %bx
+ movb $0x12, %al # Lower 8 bits
+ movb %bl, %ah
+ outw %ax, %dx
+ movb $0x07, %al # Bits 8 and 9 in the overflow register
+ call inidx
+ xchgb %al, %ah
+ andb $0xbd, %ah
+ shrb %bh
+ jnc rct1
+ orb $0x02, %ah
+rct1: shrb %bh
+ jnc rct2
+ orb $0x40, %ah
+rct2: movb $0x07, %al
+ outw %ax, %dx
+ stc
+rct3: ret
+
+# Table of routines for setting of the special modes.
+spec_inits:
+ .word set_80x25
+ .word set_8pixel
+ .word set_80x43
+ .word set_80x28
+ .word set_current
+ .word set_80x30
+ .word set_80x34
+ .word set_80x60
+ .word set_gfx
+
+# Set the 80x25 mode. If already set, do nothing.
+set_80x25:
+ movw $0x5019, force_size # Override possibly broken BIOS
+use_80x25:
+#ifdef CONFIG_VIDEO_400_HACK
+ movw $0x1202, %ax # Force 400 scan lines
+ movb $0x30, %bl
+ int $0x10
+#else
+ movb $0x0f, %ah # Get current mode ID
+ int $0x10
+ cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available
+ jz st80 # on CGA/MDA/HGA and is also available on EGAM
+
+ cmpw $0x5003, %ax # Unknown mode, force 80x25 color
+ jnz force3
+
+st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25
+ jz set80
+
+ movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc.
+ orb %al, %al # Some buggy BIOS'es set 0 rows
+ jz set80
+
+ cmpb $24, %al # It's hopefully correct
+ jz set80
+#endif /* CONFIG_VIDEO_400_HACK */
+force3: DO_STORE
+ movw $0x0003, %ax # Forced set
+ int $0x10
+set80: stc
+ ret
+
+# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
+set_8pixel:
+ DO_STORE
+ call use_80x25 # The base is 80x25
+set_8pt:
+ movw $0x1112, %ax # Use 8x8 font
+ xorb %bl, %bl
+ int $0x10
+ movw $0x1200, %ax # Use alternate print screen
+ movb $0x20, %bl
+ int $0x10
+ movw $0x1201, %ax # Turn off cursor emulation
+ movb $0x34, %bl
+ int $0x10
+ movb $0x01, %ah # Define cursor scan lines 6-7
+ movw $0x0607, %cx
+ int $0x10
+set_current:
+ stc
+ ret
+
+# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
+# 80x25 mode with 14-point fonts instead of 16-point.
+set_80x28:
+ DO_STORE
+ call use_80x25 # The base is 80x25
+set14: movw $0x1111, %ax # Use 9x14 font
+ xorb %bl, %bl
+ int $0x10
+ movb $0x01, %ah # Define cursor scan lines 11-12
+ movw $0x0b0c, %cx
+ int $0x10
+ stc
+ ret
+
+# Set the 80x43 mode. This mode is works on all VGA's.
+# It's a 350-scanline mode with 8-pixel font.
+set_80x43:
+ DO_STORE
+ movw $0x1201, %ax # Set 350 scans
+ movb $0x30, %bl
+ int $0x10
+ movw $0x0003, %ax # Reset video mode
+ int $0x10
+ jmp set_8pt # Use 8-pixel font
+
+# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
+set_80x30:
+ call use_80x25 # Start with real 80x25
+ DO_STORE
+ movw $0x3cc, %dx # Get CRTC port
+ inb %dx, %al
+ movb $0xd4, %dl
+ rorb %al # Mono or color?
+ jc set48a
+
+ movb $0xb4, %dl
+set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7)
+ call outidx
+ movw $0x0b06, %ax # Vertical total
+ call outidx
+ movw $0x3e07, %ax # (Vertical) overflow
+ call outidx
+ movw $0xea10, %ax # Vertical sync start
+ call outidx
+ movw $0xdf12, %ax # Vertical display end
+ call outidx
+ movw $0xe715, %ax # Vertical blank start
+ call outidx
+ movw $0x0416, %ax # Vertical blank end
+ call outidx
+ pushw %dx
+ movb $0xcc, %dl # Misc output register (read)
+ inb %dx, %al
+ movb $0xc2, %dl # (write)
+ andb $0x0d, %al # Preserve clock select bits and color bit
+ orb $0xe2, %al # Set correct sync polarity
+ outb %al, %dx
+ popw %dx
+ movw $0x501e, force_size
+ stc # That's all.
+ ret
+
+# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
+set_80x34:
+ call set_80x30 # Set 480 scans
+ call set14 # And 14-pt font
+ movw $0xdb12, %ax # VGA vertical display end
+ movw $0x5022, force_size
+setvde: call outidx
+ stc
+ ret
+
+# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
+set_80x60:
+ call set_80x30 # Set 480 scans
+ call set_8pt # And 8-pt font
+ movw $0xdf12, %ax # VGA vertical display end
+ movw $0x503c, force_size
+ jmp setvde
+
+# Special hack for ThinkPad graphics
+set_gfx:
+#ifdef CONFIG_VIDEO_GFX_HACK
+ movw $VIDEO_GFX_BIOS_AX, %ax
+ movw $VIDEO_GFX_BIOS_BX, %bx
+ int $0x10
+ movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size
+ stc
+#endif
+ ret
+
+#ifdef CONFIG_VIDEO_RETAIN
+
+# Store screen contents to temporary buffer.
+store_screen:
+ cmpb $0, do_restore # Already stored?
+ jnz stsr
+
+ testb $CAN_USE_HEAP, loadflags # Have we space for storing?
+ jz stsr
+
+ pushw %ax
+ pushw %bx
+ pushw force_size # Don't force specific size
+ movw $0, force_size
+ call mode_params # Obtain params of current mode
+ popw force_size
+ movb %fs:(PARAM_VIDEO_LINES), %ah
+ movb %fs:(PARAM_VIDEO_COLS), %al
+ movw %ax, %bx # BX=dimensions
+ mulb %ah
+ movw %ax, %cx # CX=number of characters
+ addw %ax, %ax # Calculate image size
+ addw $modelist+1024+4, %ax
+ cmpw heap_end_ptr, %ax
+ jnc sts1 # Unfortunately, out of memory
+
+ movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params
+ leaw modelist+1024, %di
+ stosw
+ movw %bx, %ax
+ stosw
+ pushw %ds # Store the screen
+ movw video_segment, %ds
+ xorw %si, %si
+ rep
+ movsw
+ popw %ds
+ incb do_restore # Screen will be restored later
+sts1: popw %bx
+ popw %ax
+stsr: ret
+
+# Restore screen contents from temporary buffer.
+restore_screen:
+ cmpb $0, do_restore # Has the screen been stored?
+ jz res1
+
+ call mode_params # Get parameters of current mode
+ movb %fs:(PARAM_VIDEO_LINES), %cl
+ movb %fs:(PARAM_VIDEO_COLS), %ch
+ leaw modelist+1024, %si # Screen buffer
+ lodsw # Set cursor position
+ movw %ax, %dx
+ cmpb %cl, %dh
+ jc res2
+
+ movb %cl, %dh
+ decb %dh
+res2: cmpb %ch, %dl
+ jc res3
+
+ movb %ch, %dl
+ decb %dl
+res3: movb $0x02, %ah
+ movb $0x00, %bh
+ int $0x10
+ lodsw # Display size
+ movb %ah, %dl # DL=number of lines
+ movb $0, %ah # BX=phys. length of orig. line
+ movw %ax, %bx
+ cmpb %cl, %dl # Too many?
+ jc res4
+
+ pushw %ax
+ movb %dl, %al
+ subb %cl, %al
+ mulb %bl
+ addw %ax, %si
+ addw %ax, %si
+ popw %ax
+ movb %cl, %dl
+res4: cmpb %ch, %al # Too wide?
+ jc res5
+
+ movb %ch, %al # AX=width of src. line
+res5: movb $0, %cl
+ xchgb %ch, %cl
+ movw %cx, %bp # BP=width of dest. line
+ pushw %es
+ movw video_segment, %es
+ xorw %di, %di # Move the data
+ addw %bx, %bx # Convert BX and BP to _bytes_
+ addw %bp, %bp
+res6: pushw %si
+ pushw %di
+ movw %ax, %cx
+ rep
+ movsw
+ popw %di
+ popw %si
+ addw %bp, %di
+ addw %bx, %si
+ decb %dl
+ jnz res6
+
+ popw %es # Done
+res1: ret
+#endif /* CONFIG_VIDEO_RETAIN */
+
+# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
+outidx: outb %al, %dx
+ pushw %ax
+ movb %ah, %al
+ incw %dx
+ outb %al, %dx
+ decw %dx
+ popw %ax
+ ret
+
+# Build the table of video modes (stored after the setup.S code at the
+# `modelist' label. Each video mode record looks like:
+# .word MODE-ID (our special mode ID (see above))
+# .byte rows (number of rows)
+# .byte columns (number of columns)
+# Returns address of the end of the table in DI, the end is marked
+# with a ASK_VGA ID.
+mode_table:
+ movw mt_end, %di # Already filled?
+ orw %di, %di
+ jnz mtab1x
+
+ leaw modelist, %di # Store standard modes:
+ movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL)
+ stosl
+ movb adapter, %al # CGA/MDA/HGA -- no more modes
+ orb %al, %al
+ jz mtabe
+
+ decb %al
+ jnz mtabv
+
+ movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode
+ stosl
+ jmp mtabe
+
+mtab1x: jmp mtab1
+
+mtabv: leaw vga_modes, %si # All modes for std VGA
+ movw $vga_modes_end-vga_modes, %cx
+ rep # I'm unable to use movsw as I don't know how to store a half
+ movsb # of the expression above to cx without using explicit shr.
+
+ cmpb $0, scanning # Mode scan requested?
+ jz mscan1
+
+ call mode_scan
+mscan1:
+
+#ifdef CONFIG_VIDEO_LOCAL
+ call local_modes
+#endif /* CONFIG_VIDEO_LOCAL */
+
+#ifdef CONFIG_VIDEO_VESA
+ call vesa_modes # Detect VESA VGA modes
+#endif /* CONFIG_VIDEO_VESA */
+
+#ifdef CONFIG_VIDEO_SVGA
+ cmpb $0, scanning # Bypass when scanning
+ jnz mscan2
+
+ call svga_modes # Detect SVGA cards & modes
+mscan2:
+#endif /* CONFIG_VIDEO_SVGA */
+
+mtabe:
+
+#ifdef CONFIG_VIDEO_COMPACT
+ leaw modelist, %si
+ movw %di, %dx
+ movw %si, %di
+cmt1: cmpw %dx, %si # Scan all modes
+ jz cmt2
+
+ leaw modelist, %bx # Find in previous entries
+ movw 2(%si), %cx
+cmt3: cmpw %bx, %si
+ jz cmt4
+
+ cmpw 2(%bx), %cx # Found => don't copy this entry
+ jz cmt5
+
+ addw $4, %bx
+ jmp cmt3
+
+cmt4: movsl # Copy entry
+ jmp cmt1
+
+cmt5: addw $4, %si # Skip entry
+ jmp cmt1
+
+cmt2:
+#endif /* CONFIG_VIDEO_COMPACT */
+
+ movw $ASK_VGA, (%di) # End marker
+ movw %di, mt_end
+mtab1: leaw modelist, %si # SI=mode list, DI=list end
+ret0: ret
+
+# Modes usable on all standard VGAs
+vga_modes:
+ .word VIDEO_8POINT
+ .word 0x5032 # 80x50
+ .word VIDEO_80x43
+ .word 0x502b # 80x43
+ .word VIDEO_80x28
+ .word 0x501c # 80x28
+ .word VIDEO_80x30
+ .word 0x501e # 80x30
+ .word VIDEO_80x34
+ .word 0x5022 # 80x34
+ .word VIDEO_80x60
+ .word 0x503c # 80x60
+#ifdef CONFIG_VIDEO_GFX_HACK
+ .word VIDEO_GFX_HACK
+ .word VIDEO_GFX_DUMMY_RESOLUTION
+#endif
+
+vga_modes_end:
+# Detect VESA modes.
+
+#ifdef CONFIG_VIDEO_VESA
+vesa_modes:
+ cmpb $2, adapter # VGA only
+ jnz ret0
+
+ movw %di, %bp # BP=original mode table end
+ addw $0x200, %di # Buffer space
+ movw $0x4f00, %ax # VESA Get card info call
+ int $0x10
+ movw %bp, %di
+ cmpw $0x004f, %ax # Successful?
+ jnz ret0
+
+ cmpw $0x4556, 0x200(%di)
+ jnz ret0
+
+ cmpw $0x4153, 0x202(%di)
+ jnz ret0
+
+ movw $vesa_name, card_name # Set name to "VESA VGA"
+ pushw %gs
+ lgsw 0x20e(%di), %si # GS:SI=mode list
+ movw $128, %cx # Iteration limit
+vesa1:
+# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
+# XXX: lodsw %gs:(%si), %ax # Get next mode in the list
+ gs; lodsw
+ cmpw $0xffff, %ax # End of the table?
+ jz vesar
+
+ cmpw $0x0080, %ax # Check validity of mode ID
+ jc vesa2
+
+ orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff
+ jz vesan # Certain BIOSes report 0x80-0xff!
+
+ cmpw $0x0800, %ax
+ jnc vesae
+
+vesa2: pushw %cx
+ movw %ax, %cx # Get mode information structure
+ movw $0x4f01, %ax
+ int $0x10
+ movw %cx, %bx # BX=mode number
+ addb $VIDEO_FIRST_VESA>>8, %bh
+ popw %cx
+ cmpw $0x004f, %ax
+ jnz vesan # Don't report errors (buggy BIOSES)
+
+ movb (%di), %al # Check capabilities. We require
+ andb $0x19, %al # a color text mode.
+ cmpb $0x09, %al
+ jnz vesan
+
+ cmpw $0xb800, 8(%di) # Standard video memory address required
+ jnz vesan
+
+ testb $2, (%di) # Mode characteristics supplied?
+ movw %bx, (%di) # Store mode number
+ jz vesa3
+
+ xorw %dx, %dx
+ movw 0x12(%di), %bx # Width
+ orb %bh, %bh
+ jnz vesan
+
+ movb %bl, 0x3(%di)
+ movw 0x14(%di), %ax # Height
+ orb %ah, %ah
+ jnz vesan
+
+ movb %al, 2(%di)
+ mulb %bl
+ cmpw $8193, %ax # Small enough for Linux console driver?
+ jnc vesan
+
+ jmp vesaok
+
+vesa3: subw $0x8108, %bx # This mode has no detailed info specified,
+ jc vesan # so it must be a standard VESA mode.
+
+ cmpw $5, %bx
+ jnc vesan
+
+ movw vesa_text_mode_table(%bx), %ax
+ movw %ax, 2(%di)
+vesaok: addw $4, %di # The mode is valid. Store it.
+vesan: loop vesa1 # Next mode. Limit exceeded => error
+vesae: leaw vesaer, %si
+ call prtstr
+ movw %bp, %di # Discard already found modes.
+vesar: popw %gs
+ ret
+
+# Dimensions of standard VESA text modes
+vesa_text_mode_table:
+ .byte 60, 80 # 0108
+ .byte 25, 132 # 0109
+ .byte 43, 132 # 010A
+ .byte 50, 132 # 010B
+ .byte 60, 132 # 010C
+#endif /* CONFIG_VIDEO_VESA */
+
+# Scan for video modes. A bit dirty, but should work.
+mode_scan:
+ movw $0x0100, %cx # Start with mode 0
+scm1: movb $0, %ah # Test the mode
+ movb %cl, %al
+ int $0x10
+ movb $0x0f, %ah
+ int $0x10
+ cmpb %cl, %al
+ jnz scm2 # Mode not set
+
+ movw $0x3c0, %dx # Test if it's a text mode
+ movb $0x10, %al # Mode bits
+ call inidx
+ andb $0x03, %al
+ jnz scm2
+
+ movb $0xce, %dl # Another set of mode bits
+ movb $0x06, %al
+ call inidx
+ shrb %al
+ jc scm2
+
+ movb $0xd4, %dl # Cursor location
+ movb $0x0f, %al
+ call inidx
+ orb %al, %al
+ jnz scm2
+
+ movw %cx, %ax # Ok, store the mode
+ stosw
+ movb %gs:(0x484), %al # Number of rows
+ incb %al
+ stosb
+ movw %gs:(0x44a), %ax # Number of columns
+ stosb
+scm2: incb %cl
+ jns scm1
+
+ movw $0x0003, %ax # Return back to mode 3
+ int $0x10
+ ret
+
+tstidx: outw %ax, %dx # OUT DX,AX and inidx
+inidx: outb %al, %dx # Read from indexed VGA register
+ incw %dx # AL=index, DX=index reg port -> AL=data
+ inb %dx, %al
+ decw %dx
+ ret
+
+# Try to detect type of SVGA card and supply (usually approximate) video
+# mode table for it.
+
+#ifdef CONFIG_VIDEO_SVGA
+svga_modes:
+ leaw svga_table, %si # Test all known SVGA adapters
+dosvga: lodsw
+ movw %ax, %bp # Default mode table
+ orw %ax, %ax
+ jz didsv1
+
+ lodsw # Pointer to test routine
+ pushw %si
+ pushw %di
+ pushw %es
+ movw $0xc000, %bx
+ movw %bx, %es
+ call *%ax # Call test routine
+ popw %es
+ popw %di
+ popw %si
+ orw %bp, %bp
+ jz dosvga
+
+ movw %bp, %si # Found, copy the modes
+ movb svga_prefix, %ah
+cpsvga: lodsb
+ orb %al, %al
+ jz didsv
+
+ stosw
+ movsw
+ jmp cpsvga
+
+didsv: movw %si, card_name # Store pointer to card name
+didsv1: ret
+
+# Table of all known SVGA cards. For each card, we store a pointer to
+# a table of video modes supported by the card and a pointer to a routine
+# used for testing of presence of the card. The video mode table is always
+# followed by the name of the card or the chipset.
+svga_table:
+ .word ati_md, ati_test
+ .word oak_md, oak_test
+ .word paradise_md, paradise_test
+ .word realtek_md, realtek_test
+ .word s3_md, s3_test
+ .word chips_md, chips_test
+ .word video7_md, video7_test
+ .word cirrus5_md, cirrus5_test
+ .word cirrus6_md, cirrus6_test
+ .word cirrus1_md, cirrus1_test
+ .word ahead_md, ahead_test
+ .word everex_md, everex_test
+ .word genoa_md, genoa_test
+ .word trident_md, trident_test
+ .word tseng_md, tseng_test
+ .word 0
+
+# Test routines and mode tables:
+
+# S3 - The test algorithm was taken from the SuperProbe package
+# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
+s3_test:
+ movw $0x0f35, %cx # we store some constants in cl/ch
+ movw $0x03d4, %dx
+ movb $0x38, %al
+ call inidx
+ movb %al, %bh # store current CRT-register 0x38
+ movw $0x0038, %ax
+ call outidx # disable writing to special regs
+ movb %cl, %al # check whether we can write special reg 0x35
+ call inidx
+ movb %al, %bl # save the current value of CRT reg 0x35
+ andb $0xf0, %al # clear bits 0-3
+ movb %al, %ah
+ movb %cl, %al # and write it to CRT reg 0x35
+ call outidx
+ call inidx # now read it back
+ andb %ch, %al # clear the upper 4 bits
+ jz s3_2 # the first test failed. But we have a
+
+ movb %bl, %ah # second chance
+ movb %cl, %al
+ call outidx
+ jmp s3_1 # do the other tests
+
+s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35
+ orb %bl, %ah # set the upper 4 bits of ah with the orig value
+ call outidx # write ...
+ call inidx # ... and reread
+ andb %cl, %al # turn off the upper 4 bits
+ pushw %ax
+ movb %bl, %ah # restore old value in register 0x35
+ movb %cl, %al
+ call outidx
+ popw %ax
+ cmpb %ch, %al # setting lower 4 bits was successful => bad
+ je no_s3 # writing is allowed => this is not an S3
+
+s3_1: movw $0x4838, %ax # allow writing to special regs by putting
+ call outidx # magic number into CRT-register 0x38
+ movb %cl, %al # check whether we can write special reg 0x35
+ call inidx
+ movb %al, %bl
+ andb $0xf0, %al
+ movb %al, %ah
+ movb %cl, %al
+ call outidx
+ call inidx
+ andb %ch, %al
+ jnz no_s3 # no, we can't write => no S3
+
+ movw %cx, %ax
+ orb %bl, %ah
+ call outidx
+ call inidx
+ andb %ch, %al
+ pushw %ax
+ movb %bl, %ah # restore old value in register 0x35
+ movb %cl, %al
+ call outidx
+ popw %ax
+ cmpb %ch, %al
+ jne no_s31 # writing not possible => no S3
+ movb $0x30, %al
+ call inidx # now get the S3 id ...
+ leaw idS3, %di
+ movw $0x10, %cx
+ repne
+ scasb
+ je no_s31
+
+ movb %bh, %ah
+ movb $0x38, %al
+ jmp s3rest
+
+no_s3: movb $0x35, %al # restore CRT register 0x35
+ movb %bl, %ah
+ call outidx
+no_s31: xorw %bp, %bp # Detection failed
+s3rest: movb %bh, %ah
+ movb $0x38, %al # restore old value of CRT register 0x38
+ jmp outidx
+
+idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
+ .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
+
+s3_md: .byte 0x54, 0x2b, 0x84
+ .byte 0x55, 0x19, 0x84
+ .byte 0
+ .ascii "S3"
+ .byte 0
+
+# ATI cards.
+ati_test:
+ leaw idati, %si
+ movw $0x31, %di
+ movw $0x09, %cx
+ repe
+ cmpsb
+ je atiok
+
+ xorw %bp, %bp
+atiok: ret
+
+idati: .ascii "761295520"
+
+ati_md: .byte 0x23, 0x19, 0x84
+ .byte 0x33, 0x2c, 0x84
+ .byte 0x22, 0x1e, 0x64
+ .byte 0x21, 0x19, 0x64
+ .byte 0x58, 0x21, 0x50
+ .byte 0x5b, 0x1e, 0x50
+ .byte 0
+ .ascii "ATI"
+ .byte 0
+
+# AHEAD
+ahead_test:
+ movw $0x200f, %ax
+ movw $0x3ce, %dx
+ outw %ax, %dx
+ incw %dx
+ inb %dx, %al
+ cmpb $0x20, %al
+ je isahed
+
+ cmpb $0x21, %al
+ je isahed
+
+ xorw %bp, %bp
+isahed: ret
+
+ahead_md:
+ .byte 0x22, 0x2c, 0x84
+ .byte 0x23, 0x19, 0x84
+ .byte 0x24, 0x1c, 0x84
+ .byte 0x2f, 0x32, 0xa0
+ .byte 0x32, 0x22, 0x50
+ .byte 0x34, 0x42, 0x50
+ .byte 0
+ .ascii "Ahead"
+ .byte 0
+
+# Chips & Tech.
+chips_test:
+ movw $0x3c3, %dx
+ inb %dx, %al
+ orb $0x10, %al
+ outb %al, %dx
+ movw $0x104, %dx
+ inb %dx, %al
+ movb %al, %bl
+ movw $0x3c3, %dx
+ inb %dx, %al
+ andb $0xef, %al
+ outb %al, %dx
+ cmpb $0xa5, %bl
+ je cantok
+
+ xorw %bp, %bp
+cantok: ret
+
+chips_md:
+ .byte 0x60, 0x19, 0x84
+ .byte 0x61, 0x32, 0x84
+ .byte 0
+ .ascii "Chips & Technologies"
+ .byte 0
+
+# Cirrus Logic 5X0
+cirrus1_test:
+ movw $0x3d4, %dx
+ movb $0x0c, %al
+ outb %al, %dx
+ incw %dx
+ inb %dx, %al
+ movb %al, %bl
+ xorb %al, %al
+ outb %al, %dx
+ decw %dx
+ movb $0x1f, %al
+ outb %al, %dx
+ incw %dx
+ inb %dx, %al
+ movb %al, %bh
+ xorb %ah, %ah
+ shlb $4, %al
+ movw %ax, %cx
+ movb %bh, %al
+ shrb $4, %al
+ addw %ax, %cx
+ shlw $8, %cx
+ addw $6, %cx
+ movw %cx, %ax
+ movw $0x3c4, %dx
+ outw %ax, %dx
+ incw %dx
+ inb %dx, %al
+ andb %al, %al
+ jnz nocirr
+
+ movb %bh, %al
+ outb %al, %dx
+ inb %dx, %al
+ cmpb $0x01, %al
+ je iscirr
+
+nocirr: xorw %bp, %bp
+iscirr: movw $0x3d4, %dx
+ movb %bl, %al
+ xorb %ah, %ah
+ shlw $8, %ax
+ addw $0x0c, %ax
+ outw %ax, %dx
+ ret
+
+cirrus1_md:
+ .byte 0x1f, 0x19, 0x84
+ .byte 0x20, 0x2c, 0x84
+ .byte 0x22, 0x1e, 0x84
+ .byte 0x31, 0x25, 0x64
+ .byte 0
+ .ascii "Cirrus Logic 5X0"
+ .byte 0
+
+# Cirrus Logic 54XX
+cirrus5_test:
+ movw $0x3c4, %dx
+ movb $6, %al
+ call inidx
+ movb %al, %bl # BL=backup
+ movw $6, %ax
+ call tstidx
+ cmpb $0x0f, %al
+ jne c5fail
+
+ movw $0x1206, %ax
+ call tstidx
+ cmpb $0x12, %al
+ jne c5fail
+
+ movb $0x1e, %al
+ call inidx
+ movb %al, %bh
+ movb %bh, %ah
+ andb $0xc0, %ah
+ movb $0x1e, %al
+ call tstidx
+ andb $0x3f, %al
+ jne c5xx
+
+ movb $0x1e, %al
+ movb %bh, %ah
+ orb $0x3f, %ah
+ call tstidx
+ xorb $0x3f, %al
+ andb $0x3f, %al
+c5xx: pushf
+ movb $0x1e, %al
+ movb %bh, %ah
+ outw %ax, %dx
+ popf
+ je c5done
+
+c5fail: xorw %bp, %bp
+c5done: movb $6, %al
+ movb %bl, %ah
+ outw %ax, %dx
+ ret
+
+cirrus5_md:
+ .byte 0x14, 0x19, 0x84
+ .byte 0x54, 0x2b, 0x84
+ .byte 0
+ .ascii "Cirrus Logic 54XX"
+ .byte 0
+
+# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
+# it's misidentified by the Ahead test.
+cirrus6_test:
+ movw $0x3ce, %dx
+ movb $0x0a, %al
+ call inidx
+ movb %al, %bl # BL=backup
+ movw $0xce0a, %ax
+ call tstidx
+ orb %al, %al
+ jne c2fail
+
+ movw $0xec0a, %ax
+ call tstidx
+ cmpb $0x01, %al
+ jne c2fail
+
+ movb $0xaa, %al
+ call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's.
+ shrb $4, %al
+ subb $4, %al
+ jz c6done
+
+ decb %al
+ jz c6done
+
+ subb $2, %al
+ jz c6done
+
+ decb %al
+ jz c6done
+
+c2fail: xorw %bp, %bp
+c6done: movb $0x0a, %al
+ movb %bl, %ah
+ outw %ax, %dx
+ ret
+
+cirrus6_md:
+ .byte 0
+ .ascii "Cirrus Logic 64XX"
+ .byte 0
+
+# Everex / Trident
+everex_test:
+ movw $0x7000, %ax
+ xorw %bx, %bx
+ int $0x10
+ cmpb $0x70, %al
+ jne noevrx
+
+ shrw $4, %dx
+ cmpw $0x678, %dx
+ je evtrid
+
+ cmpw $0x236, %dx
+ jne evrxok
+
+evtrid: leaw trident_md, %bp
+evrxok: ret
+
+noevrx: xorw %bp, %bp
+ ret
+
+everex_md:
+ .byte 0x03, 0x22, 0x50
+ .byte 0x04, 0x3c, 0x50
+ .byte 0x07, 0x2b, 0x64
+ .byte 0x08, 0x4b, 0x64
+ .byte 0x0a, 0x19, 0x84
+ .byte 0x0b, 0x2c, 0x84
+ .byte 0x16, 0x1e, 0x50
+ .byte 0x18, 0x1b, 0x64
+ .byte 0x21, 0x40, 0xa0
+ .byte 0x40, 0x1e, 0x84
+ .byte 0
+ .ascii "Everex/Trident"
+ .byte 0
+
+# Genoa.
+genoa_test:
+ leaw idgenoa, %si # Check Genoa 'clues'
+ xorw %ax, %ax
+ movb %es:(0x37), %al
+ movw %ax, %di
+ movw $0x04, %cx
+ decw %si
+ decw %di
+l1: incw %si
+ incw %di
+ movb (%si), %al
+ testb %al, %al
+ jz l2
+
+ cmpb %es:(%di), %al
+l2: loope l1
+ orw %cx, %cx
+ je isgen
+
+ xorw %bp, %bp
+isgen: ret
+
+idgenoa: .byte 0x77, 0x00, 0x99, 0x66
+
+genoa_md:
+ .byte 0x58, 0x20, 0x50
+ .byte 0x5a, 0x2a, 0x64
+ .byte 0x60, 0x19, 0x84
+ .byte 0x61, 0x1d, 0x84
+ .byte 0x62, 0x20, 0x84
+ .byte 0x63, 0x2c, 0x84
+ .byte 0x64, 0x3c, 0x84
+ .byte 0x6b, 0x4f, 0x64
+ .byte 0x72, 0x3c, 0x50
+ .byte 0x74, 0x42, 0x50
+ .byte 0x78, 0x4b, 0x64
+ .byte 0
+ .ascii "Genoa"
+ .byte 0
+
+# OAK
+oak_test:
+ leaw idoakvga, %si
+ movw $0x08, %di
+ movw $0x08, %cx
+ repe
+ cmpsb
+ je isoak
+
+ xorw %bp, %bp
+isoak: ret
+
+idoakvga: .ascii "OAK VGA "
+
+oak_md: .byte 0x4e, 0x3c, 0x50
+ .byte 0x4f, 0x3c, 0x84
+ .byte 0x50, 0x19, 0x84
+ .byte 0x51, 0x2b, 0x84
+ .byte 0
+ .ascii "OAK"
+ .byte 0
+
+# WD Paradise.
+paradise_test:
+ leaw idparadise, %si
+ movw $0x7d, %di
+ movw $0x04, %cx
+ repe
+ cmpsb
+ je ispara
+
+ xorw %bp, %bp
+ispara: ret
+
+idparadise: .ascii "VGA="
+
+paradise_md:
+ .byte 0x41, 0x22, 0x50
+ .byte 0x47, 0x1c, 0x84
+ .byte 0x55, 0x19, 0x84
+ .byte 0x54, 0x2c, 0x84
+ .byte 0
+ .ascii "Paradise"
+ .byte 0
+
+# Trident.
+trident_test:
+ movw $0x3c4, %dx
+ movb $0x0e, %al
+ outb %al, %dx
+ incw %dx
+ inb %dx, %al
+ xchgb %al, %ah
+ xorb %al, %al
+ outb %al, %dx
+ inb %dx, %al
+ xchgb %ah, %al
+ movb %al, %bl # Strange thing ... in the book this wasn't
+ andb $0x02, %bl # necessary but it worked on my card which
+ jz setb2 # is a trident. Without it the screen goes
+ # blurred ...
+ andb $0xfd, %al
+ jmp clrb2
+
+setb2: orb $0x02, %al
+clrb2: outb %al, %dx
+ andb $0x0f, %ah
+ cmpb $0x02, %ah
+ je istrid
+
+ xorw %bp, %bp
+istrid: ret
+
+trident_md:
+ .byte 0x50, 0x1e, 0x50
+ .byte 0x51, 0x2b, 0x50
+ .byte 0x52, 0x3c, 0x50
+ .byte 0x57, 0x19, 0x84
+ .byte 0x58, 0x1e, 0x84
+ .byte 0x59, 0x2b, 0x84
+ .byte 0x5a, 0x3c, 0x84
+ .byte 0
+ .ascii "Trident"
+ .byte 0
+
+# Tseng.
+tseng_test:
+ movw $0x3cd, %dx
+ inb %dx, %al # Could things be this simple ! :-)
+ movb %al, %bl
+ movb $0x55, %al
+ outb %al, %dx
+ inb %dx, %al
+ movb %al, %ah
+ movb %bl, %al
+ outb %al, %dx
+ cmpb $0x55, %ah
+ je istsen
+
+isnot: xorw %bp, %bp
+istsen: ret
+
+tseng_md:
+ .byte 0x26, 0x3c, 0x50
+ .byte 0x2a, 0x28, 0x64
+ .byte 0x23, 0x19, 0x84
+ .byte 0x24, 0x1c, 0x84
+ .byte 0x22, 0x2c, 0x84
+ .byte 0x21, 0x3c, 0x84
+ .byte 0
+ .ascii "Tseng"
+ .byte 0
+
+# Video7.
+video7_test:
+ movw $0x3cc, %dx
+ inb %dx, %al
+ movw $0x3b4, %dx
+ andb $0x01, %al
+ jz even7
+
+ movw $0x3d4, %dx
+even7: movb $0x0c, %al
+ outb %al, %dx
+ incw %dx
+ inb %dx, %al
+ movb %al, %bl
+ movb $0x55, %al
+ outb %al, %dx
+ inb %dx, %al
+ decw %dx
+ movb $0x1f, %al
+ outb %al, %dx
+ incw %dx
+ inb %dx, %al
+ movb %al, %bh
+ decw %dx
+ movb $0x0c, %al
+ outb %al, %dx
+ incw %dx
+ movb %bl, %al
+ outb %al, %dx
+ movb $0x55, %al
+ xorb $0xea, %al
+ cmpb %bh, %al
+ jne isnot
+
+ movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
+ ret
+
+video7_md:
+ .byte 0x40, 0x2b, 0x50
+ .byte 0x43, 0x3c, 0x50
+ .byte 0x44, 0x3c, 0x64
+ .byte 0x41, 0x19, 0x84
+ .byte 0x42, 0x2c, 0x84
+ .byte 0x45, 0x1c, 0x84
+ .byte 0
+ .ascii "Video 7"
+ .byte 0
+
+# Realtek VGA
+realtek_test:
+ leaw idrtvga, %si
+ movw $0x45, %di
+ movw $0x0b, %cx
+ repe
+ cmpsb
+ je isrt
+
+ xorw %bp, %bp
+isrt: ret
+
+idrtvga: .ascii "REALTEK VGA"
+
+realtek_md:
+ .byte 0x1a, 0x3c, 0x50
+ .byte 0x1b, 0x19, 0x84
+ .byte 0x1c, 0x1e, 0x84
+ .byte 0x1d, 0x2b, 0x84
+ .byte 0x1e, 0x3c, 0x84
+ .byte 0
+ .ascii "REALTEK"
+ .byte 0
+
+#endif /* CONFIG_VIDEO_SVGA */
+
+# User-defined local mode table (VGA only)
+#ifdef CONFIG_VIDEO_LOCAL
+local_modes:
+ leaw local_mode_table, %si
+locm1: lodsw
+ orw %ax, %ax
+ jz locm2
+
+ stosw
+ movsw
+ jmp locm1
+
+locm2: ret
+
+# This is the table of local video modes which can be supplied manually
+# by the user. Each entry consists of mode ID (word) and dimensions
+# (byte for column count and another byte for row count). These modes
+# are placed before all SVGA and VESA modes and override them if table
+# compacting is enabled. The table must end with a zero word followed
+# by NUL-terminated video adapter name.
+local_mode_table:
+ .word 0x0100 # Example: 40x25
+ .byte 25,40
+ .word 0
+ .ascii "Local"
+ .byte 0
+#endif /* CONFIG_VIDEO_LOCAL */
+
+# Read a key and return the ASCII code in al, scan code in ah
+getkey: xorb %ah, %ah
+ int $0x16
+ ret
+
+# Read a key with a timeout of 30 seconds.
+# The hardware clock is used to get the time.
+getkt: call gettime
+ addb $30, %al # Wait 30 seconds
+ cmpb $60, %al
+ jl lminute
+
+ subb $60, %al
+lminute:
+ movb %al, %cl
+again: movb $0x01, %ah
+ int $0x16
+ jnz getkey # key pressed, so get it
+
+ call gettime
+ cmpb %cl, %al
+ jne again
+
+ movb $0x20, %al # timeout, return `space'
+ ret
+
+# Flush the keyboard buffer
+flush: movb $0x01, %ah
+ int $0x16
+ jz empty
+
+ xorb %ah, %ah
+ int $0x16
+ jmp flush
+
+empty: ret
+
+# Print hexadecimal number.
+prthw: pushw %ax
+ movb %ah, %al
+ call prthb
+ popw %ax
+prthb: pushw %ax
+ shrb $4, %al
+ call prthn
+ popw %ax
+ andb $0x0f, %al
+prthn: cmpb $0x0a, %al
+ jc prth1
+
+ addb $0x07, %al
+prth1: addb $0x30, %al
+ jmp prtchr
+
+# Print decimal number in al
+prtdec: pushw %ax
+ pushw %cx
+ xorb %ah, %ah
+ movb $0x0a, %cl
+ idivb %cl
+ cmpb $0x09, %al
+ jbe lt100
+
+ call prtdec
+ jmp skip10
+
+lt100: addb $0x30, %al
+ call prtchr
+skip10: movb %ah, %al
+ addb $0x30, %al
+ call prtchr
+ popw %cx
+ popw %ax
+ ret
+
+store_edid:
+ pushw %es # just save all registers
+ pushw %ax
+ pushw %bx
+ pushw %cx
+ pushw %dx
+ pushw %di
+
+ pushw %fs
+ popw %es
+
+ movl $0x13131313, %eax # memset block with 0x13
+ movw $32, %cx
+ movw $0x140, %di
+ cld
+ rep
+ stosl
+
+ movw $0x4f15, %ax # do VBE/DDC
+ movw $0x01, %bx
+ movw $0x00, %cx
+ movw $0x01, %dx
+ movw $0x140, %di
+ int $0x10
+
+ popw %di # restore all registers
+ popw %dx
+ popw %cx
+ popw %bx
+ popw %ax
+ popw %es
+ ret
+
+# VIDEO_SELECT-only variables
+mt_end: .word 0 # End of video mode table if built
+edit_buf: .space 6 # Line editor buffer
+card_name: .word 0 # Pointer to adapter name
+scanning: .byte 0 # Performing mode scan
+do_restore: .byte 0 # Screen contents altered during mode change
+svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
+graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
+dac_size: .byte 6 # DAC bit depth
+
+# Status messages
+keymsg: .ascii "Press <RETURN> to see video modes available, "
+ .ascii "<SPACE> to continue or wait 30 secs"
+ .byte 0x0d, 0x0a, 0
+
+listhdr: .byte 0x0d, 0x0a
+ .ascii "Mode: COLSxROWS:"
+
+crlft: .byte 0x0d, 0x0a, 0
+
+prompt: .byte 0x0d, 0x0a
+ .asciz "Enter mode number or `scan': "
+
+unknt: .asciz "Unknown mode ID. Try again."
+
+badmdt: .ascii "You passed an undefined mode number."
+ .byte 0x0d, 0x0a, 0
+
+vesaer: .ascii "Error: Scanning of VESA modes failed. Please "
+ .ascii "report to <mj@ucw.cz>."
+ .byte 0x0d, 0x0a, 0
+
+old_name: .asciz "CGA/MDA/HGA"
+
+ega_name: .asciz "EGA"
+
+svga_name: .ascii " "
+
+vga_name: .asciz "VGA"
+
+vesa_name: .asciz "VESA"
+
+name_bann: .asciz "Video adapter: "
+#endif /* CONFIG_VIDEO_SELECT */
+
+# Other variables:
+adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
+video_segment: .word 0xb800 # Video memory segment
+force_size: .word 0 # Use this size instead of the one in BIOS vars
diff --git a/arch/i386/crypto/Makefile b/arch/i386/crypto/Makefile
new file mode 100644
index 0000000..103c353
--- /dev/null
+++ b/arch/i386/crypto/Makefile
@@ -0,0 +1,9 @@
+#
+# i386/crypto/Makefile
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
+
+aes-i586-y := aes-i586-asm.o aes.o
diff --git a/arch/i386/crypto/aes-i586-asm.S b/arch/i386/crypto/aes-i586-asm.S
new file mode 100644
index 0000000..7b73c67
--- /dev/null
+++ b/arch/i386/crypto/aes-i586-asm.S
@@ -0,0 +1,376 @@
+// -------------------------------------------------------------------------
+// Copyright (c) 2001, Dr Brian Gladman < >, Worcester, UK.
+// All rights reserved.
+//
+// LICENSE TERMS
+//
+// The free distribution and use of this software in both source and binary
+// form is allowed (with or without changes) provided that:
+//
+// 1. distributions of this source code include the above copyright
+// notice, this list of conditions and the following disclaimer//
+//
+// 2. distributions in binary form include the above copyright
+// notice, this list of conditions and the following disclaimer
+// in the documentation and/or other associated materials//
+//
+// 3. the copyright holder's name is not used to endorse products
+// built using this software without specific written permission.
+//
+//
+// ALTERNATIVELY, provided that this notice is retained in full, this product
+// may be distributed under the terms of the GNU General Public License (GPL),
+// in which case the provisions of the GPL apply INSTEAD OF those given above.
+//
+// Copyright (c) 2004 Linus Torvalds <torvalds@osdl.org>
+// Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+
+// DISCLAIMER
+//
+// This software is provided 'as is' with no explicit or implied warranties
+// in respect of its properties including, but not limited to, correctness
+// and fitness for purpose.
+// -------------------------------------------------------------------------
+// Issue Date: 29/07/2002
+
+.file "aes-i586-asm.S"
+.text
+
+// aes_rval aes_enc_blk(const unsigned char in_blk[], unsigned char out_blk[], const aes_ctx cx[1])//
+// aes_rval aes_dec_blk(const unsigned char in_blk[], unsigned char out_blk[], const aes_ctx cx[1])//
+
+#define tlen 1024 // length of each of 4 'xor' arrays (256 32-bit words)
+
+// offsets to parameters with one register pushed onto stack
+
+#define in_blk 8 // input byte array address parameter
+#define out_blk 12 // output byte array address parameter
+#define ctx 16 // AES context structure
+
+// offsets in context structure
+
+#define ekey 0 // encryption key schedule base address
+#define nrnd 256 // number of rounds
+#define dkey 260 // decryption key schedule base address
+
+// register mapping for encrypt and decrypt subroutines
+
+#define r0 eax
+#define r1 ebx
+#define r2 ecx
+#define r3 edx
+#define r4 esi
+#define r5 edi
+
+#define eaxl al
+#define eaxh ah
+#define ebxl bl
+#define ebxh bh
+#define ecxl cl
+#define ecxh ch
+#define edxl dl
+#define edxh dh
+
+#define _h(reg) reg##h
+#define h(reg) _h(reg)
+
+#define _l(reg) reg##l
+#define l(reg) _l(reg)
+
+// This macro takes a 32-bit word representing a column and uses
+// each of its four bytes to index into four tables of 256 32-bit
+// words to obtain values that are then xored into the appropriate
+// output registers r0, r1, r4 or r5.
+
+// Parameters:
+// table table base address
+// %1 out_state[0]
+// %2 out_state[1]
+// %3 out_state[2]
+// %4 out_state[3]
+// idx input register for the round (destroyed)
+// tmp scratch register for the round
+// sched key schedule
+
+#define do_col(table, a1,a2,a3,a4, idx, tmp) \
+ movzx %l(idx),%tmp; \
+ xor table(,%tmp,4),%a1; \
+ movzx %h(idx),%tmp; \
+ shr $16,%idx; \
+ xor table+tlen(,%tmp,4),%a2; \
+ movzx %l(idx),%tmp; \
+ movzx %h(idx),%idx; \
+ xor table+2*tlen(,%tmp,4),%a3; \
+ xor table+3*tlen(,%idx,4),%a4;
+
+// initialise output registers from the key schedule
+// NB1: original value of a3 is in idx on exit
+// NB2: original values of a1,a2,a4 aren't used
+#define do_fcol(table, a1,a2,a3,a4, idx, tmp, sched) \
+ mov 0 sched,%a1; \
+ movzx %l(idx),%tmp; \
+ mov 12 sched,%a2; \
+ xor table(,%tmp,4),%a1; \
+ mov 4 sched,%a4; \
+ movzx %h(idx),%tmp; \
+ shr $16,%idx; \
+ xor table+tlen(,%tmp,4),%a2; \
+ movzx %l(idx),%tmp; \
+ movzx %h(idx),%idx; \
+ xor table+3*tlen(,%idx,4),%a4; \
+ mov %a3,%idx; \
+ mov 8 sched,%a3; \
+ xor table+2*tlen(,%tmp,4),%a3;
+
+// initialise output registers from the key schedule
+// NB1: original value of a3 is in idx on exit
+// NB2: original values of a1,a2,a4 aren't used
+#define do_icol(table, a1,a2,a3,a4, idx, tmp, sched) \
+ mov 0 sched,%a1; \
+ movzx %l(idx),%tmp; \
+ mov 4 sched,%a2; \
+ xor table(,%tmp,4),%a1; \
+ mov 12 sched,%a4; \
+ movzx %h(idx),%tmp; \
+ shr $16,%idx; \
+ xor table+tlen(,%tmp,4),%a2; \
+ movzx %l(idx),%tmp; \
+ movzx %h(idx),%idx; \
+ xor table+3*tlen(,%idx,4),%a4; \
+ mov %a3,%idx; \
+ mov 8 sched,%a3; \
+ xor table+2*tlen(,%tmp,4),%a3;
+
+
+// original Gladman had conditional saves to MMX regs.
+#define save(a1, a2) \
+ mov %a2,4*a1(%esp)
+
+#define restore(a1, a2) \
+ mov 4*a2(%esp),%a1
+
+// These macros perform a forward encryption cycle. They are entered with
+// the first previous round column values in r0,r1,r4,r5 and
+// exit with the final values in the same registers, using stack
+// for temporary storage.
+
+// round column values
+// on entry: r0,r1,r4,r5
+// on exit: r2,r1,r4,r5
+#define fwd_rnd1(arg, table) \
+ save (0,r1); \
+ save (1,r5); \
+ \
+ /* compute new column values */ \
+ do_fcol(table, r2,r5,r4,r1, r0,r3, arg); /* idx=r0 */ \
+ do_col (table, r4,r1,r2,r5, r0,r3); /* idx=r4 */ \
+ restore(r0,0); \
+ do_col (table, r1,r2,r5,r4, r0,r3); /* idx=r1 */ \
+ restore(r0,1); \
+ do_col (table, r5,r4,r1,r2, r0,r3); /* idx=r5 */
+
+// round column values
+// on entry: r2,r1,r4,r5
+// on exit: r0,r1,r4,r5
+#define fwd_rnd2(arg, table) \
+ save (0,r1); \
+ save (1,r5); \
+ \
+ /* compute new column values */ \
+ do_fcol(table, r0,r5,r4,r1, r2,r3, arg); /* idx=r2 */ \
+ do_col (table, r4,r1,r0,r5, r2,r3); /* idx=r4 */ \
+ restore(r2,0); \
+ do_col (table, r1,r0,r5,r4, r2,r3); /* idx=r1 */ \
+ restore(r2,1); \
+ do_col (table, r5,r4,r1,r0, r2,r3); /* idx=r5 */
+
+// These macros performs an inverse encryption cycle. They are entered with
+// the first previous round column values in r0,r1,r4,r5 and
+// exit with the final values in the same registers, using stack
+// for temporary storage
+
+// round column values
+// on entry: r0,r1,r4,r5
+// on exit: r2,r1,r4,r5
+#define inv_rnd1(arg, table) \
+ save (0,r1); \
+ save (1,r5); \
+ \
+ /* compute new column values */ \
+ do_icol(table, r2,r1,r4,r5, r0,r3, arg); /* idx=r0 */ \
+ do_col (table, r4,r5,r2,r1, r0,r3); /* idx=r4 */ \
+ restore(r0,0); \
+ do_col (table, r1,r4,r5,r2, r0,r3); /* idx=r1 */ \
+ restore(r0,1); \
+ do_col (table, r5,r2,r1,r4, r0,r3); /* idx=r5 */
+
+// round column values
+// on entry: r2,r1,r4,r5
+// on exit: r0,r1,r4,r5
+#define inv_rnd2(arg, table) \
+ save (0,r1); \
+ save (1,r5); \
+ \
+ /* compute new column values */ \
+ do_icol(table, r0,r1,r4,r5, r2,r3, arg); /* idx=r2 */ \
+ do_col (table, r4,r5,r0,r1, r2,r3); /* idx=r4 */ \
+ restore(r2,0); \
+ do_col (table, r1,r4,r5,r0, r2,r3); /* idx=r1 */ \
+ restore(r2,1); \
+ do_col (table, r5,r0,r1,r4, r2,r3); /* idx=r5 */
+
+// AES (Rijndael) Encryption Subroutine
+
+.global aes_enc_blk
+
+.extern ft_tab
+.extern fl_tab
+
+.align 4
+
+aes_enc_blk:
+ push %ebp
+ mov ctx(%esp),%ebp // pointer to context
+
+// CAUTION: the order and the values used in these assigns
+// rely on the register mappings
+
+1: push %ebx
+ mov in_blk+4(%esp),%r2
+ push %esi
+ mov nrnd(%ebp),%r3 // number of rounds
+ push %edi
+#if ekey != 0
+ lea ekey(%ebp),%ebp // key pointer
+#endif
+
+// input four columns and xor in first round key
+
+ mov (%r2),%r0
+ mov 4(%r2),%r1
+ mov 8(%r2),%r4
+ mov 12(%r2),%r5
+ xor (%ebp),%r0
+ xor 4(%ebp),%r1
+ xor 8(%ebp),%r4
+ xor 12(%ebp),%r5
+
+ sub $8,%esp // space for register saves on stack
+ add $16,%ebp // increment to next round key
+ sub $10,%r3
+ je 4f // 10 rounds for 128-bit key
+ add $32,%ebp
+ sub $2,%r3
+ je 3f // 12 rounds for 128-bit key
+ add $32,%ebp
+
+2: fwd_rnd1( -64(%ebp) ,ft_tab) // 14 rounds for 128-bit key
+ fwd_rnd2( -48(%ebp) ,ft_tab)
+3: fwd_rnd1( -32(%ebp) ,ft_tab) // 12 rounds for 128-bit key
+ fwd_rnd2( -16(%ebp) ,ft_tab)
+4: fwd_rnd1( (%ebp) ,ft_tab) // 10 rounds for 128-bit key
+ fwd_rnd2( +16(%ebp) ,ft_tab)
+ fwd_rnd1( +32(%ebp) ,ft_tab)
+ fwd_rnd2( +48(%ebp) ,ft_tab)
+ fwd_rnd1( +64(%ebp) ,ft_tab)
+ fwd_rnd2( +80(%ebp) ,ft_tab)
+ fwd_rnd1( +96(%ebp) ,ft_tab)
+ fwd_rnd2(+112(%ebp) ,ft_tab)
+ fwd_rnd1(+128(%ebp) ,ft_tab)
+ fwd_rnd2(+144(%ebp) ,fl_tab) // last round uses a different table
+
+// move final values to the output array. CAUTION: the
+// order of these assigns rely on the register mappings
+
+ add $8,%esp
+ mov out_blk+12(%esp),%ebp
+ mov %r5,12(%ebp)
+ pop %edi
+ mov %r4,8(%ebp)
+ pop %esi
+ mov %r1,4(%ebp)
+ pop %ebx
+ mov %r0,(%ebp)
+ pop %ebp
+ mov $1,%eax
+ ret
+
+// AES (Rijndael) Decryption Subroutine
+
+.global aes_dec_blk
+
+.extern it_tab
+.extern il_tab
+
+.align 4
+
+aes_dec_blk:
+ push %ebp
+ mov ctx(%esp),%ebp // pointer to context
+
+// CAUTION: the order and the values used in these assigns
+// rely on the register mappings
+
+1: push %ebx
+ mov in_blk+4(%esp),%r2
+ push %esi
+ mov nrnd(%ebp),%r3 // number of rounds
+ push %edi
+#if dkey != 0
+ lea dkey(%ebp),%ebp // key pointer
+#endif
+ mov %r3,%r0
+ shl $4,%r0
+ add %r0,%ebp
+
+// input four columns and xor in first round key
+
+ mov (%r2),%r0
+ mov 4(%r2),%r1
+ mov 8(%r2),%r4
+ mov 12(%r2),%r5
+ xor (%ebp),%r0
+ xor 4(%ebp),%r1
+ xor 8(%ebp),%r4
+ xor 12(%ebp),%r5
+
+ sub $8,%esp // space for register saves on stack
+ sub $16,%ebp // increment to next round key
+ sub $10,%r3
+ je 4f // 10 rounds for 128-bit key
+ sub $32,%ebp
+ sub $2,%r3
+ je 3f // 12 rounds for 128-bit key
+ sub $32,%ebp
+
+2: inv_rnd1( +64(%ebp), it_tab) // 14 rounds for 128-bit key
+ inv_rnd2( +48(%ebp), it_tab)
+3: inv_rnd1( +32(%ebp), it_tab) // 12 rounds for 128-bit key
+ inv_rnd2( +16(%ebp), it_tab)
+4: inv_rnd1( (%ebp), it_tab) // 10 rounds for 128-bit key
+ inv_rnd2( -16(%ebp), it_tab)
+ inv_rnd1( -32(%ebp), it_tab)
+ inv_rnd2( -48(%ebp), it_tab)
+ inv_rnd1( -64(%ebp), it_tab)
+ inv_rnd2( -80(%ebp), it_tab)
+ inv_rnd1( -96(%ebp), it_tab)
+ inv_rnd2(-112(%ebp), it_tab)
+ inv_rnd1(-128(%ebp), it_tab)
+ inv_rnd2(-144(%ebp), il_tab) // last round uses a different table
+
+// move final values to the output array. CAUTION: the
+// order of these assigns rely on the register mappings
+
+ add $8,%esp
+ mov out_blk+12(%esp),%ebp
+ mov %r5,12(%ebp)
+ pop %edi
+ mov %r4,8(%ebp)
+ pop %esi
+ mov %r1,4(%ebp)
+ pop %ebx
+ mov %r0,(%ebp)
+ pop %ebp
+ mov $1,%eax
+ ret
+
diff --git a/arch/i386/crypto/aes.c b/arch/i386/crypto/aes.c
new file mode 100644
index 0000000..1019430
--- /dev/null
+++ b/arch/i386/crypto/aes.c
@@ -0,0 +1,520 @@
+/*
+ *
+ * Glue Code for optimized 586 assembler version of AES
+ *
+ * Copyright (c) 2002, Dr Brian Gladman <>, Worcester, UK.
+ * All rights reserved.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ * 1. distributions of this source code include the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ *
+ * 2. distributions in binary form include the above copyright
+ * notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other associated materials;
+ *
+ * 3. the copyright holder's name is not used to endorse products
+ * built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ *
+ * Copyright (c) 2003, Adam J. Richter <adam@yggdrasil.com> (conversion to
+ * 2.5 API).
+ * Copyright (c) 2003, 2004 Fruhwirth Clemens <clemens@endorphin.org>
+ * Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/linkage.h>
+
+asmlinkage void aes_enc_blk(const u8 *src, u8 *dst, void *ctx);
+asmlinkage void aes_dec_blk(const u8 *src, u8 *dst, void *ctx);
+
+#define AES_MIN_KEY_SIZE 16
+#define AES_MAX_KEY_SIZE 32
+#define AES_BLOCK_SIZE 16
+#define AES_KS_LENGTH 4 * AES_BLOCK_SIZE
+#define RC_LENGTH 29
+
+struct aes_ctx {
+ u32 ekey[AES_KS_LENGTH];
+ u32 rounds;
+ u32 dkey[AES_KS_LENGTH];
+};
+
+#define WPOLY 0x011b
+#define u32_in(x) le32_to_cpu(*(const u32 *)(x))
+#define bytes2word(b0, b1, b2, b3) \
+ (((u32)(b3) << 24) | ((u32)(b2) << 16) | ((u32)(b1) << 8) | (b0))
+
+/* define the finite field multiplies required for Rijndael */
+#define f2(x) ((x) ? pow[log[x] + 0x19] : 0)
+#define f3(x) ((x) ? pow[log[x] + 0x01] : 0)
+#define f9(x) ((x) ? pow[log[x] + 0xc7] : 0)
+#define fb(x) ((x) ? pow[log[x] + 0x68] : 0)
+#define fd(x) ((x) ? pow[log[x] + 0xee] : 0)
+#define fe(x) ((x) ? pow[log[x] + 0xdf] : 0)
+#define fi(x) ((x) ? pow[255 - log[x]]: 0)
+
+static inline u32 upr(u32 x, int n)
+{
+ return (x << 8 * n) | (x >> (32 - 8 * n));
+}
+
+static inline u8 bval(u32 x, int n)
+{
+ return x >> 8 * n;
+}
+
+/* The forward and inverse affine transformations used in the S-box */
+#define fwd_affine(x) \
+ (w = (u32)x, w ^= (w<<1)^(w<<2)^(w<<3)^(w<<4), 0x63^(u8)(w^(w>>8)))
+
+#define inv_affine(x) \
+ (w = (u32)x, w = (w<<1)^(w<<3)^(w<<6), 0x05^(u8)(w^(w>>8)))
+
+static u32 rcon_tab[RC_LENGTH];
+
+u32 ft_tab[4][256];
+u32 fl_tab[4][256];
+static u32 ls_tab[4][256];
+static u32 im_tab[4][256];
+u32 il_tab[4][256];
+u32 it_tab[4][256];
+
+static void gen_tabs(void)
+{
+ u32 i, w;
+ u8 pow[512], log[256];
+
+ /*
+ * log and power tables for GF(2^8) finite field with
+ * WPOLY as modular polynomial - the simplest primitive
+ * root is 0x03, used here to generate the tables.
+ */
+ i = 0; w = 1;
+
+ do {
+ pow[i] = (u8)w;
+ pow[i + 255] = (u8)w;
+ log[w] = (u8)i++;
+ w ^= (w << 1) ^ (w & 0x80 ? WPOLY : 0);
+ } while (w != 1);
+
+ for(i = 0, w = 1; i < RC_LENGTH; ++i) {
+ rcon_tab[i] = bytes2word(w, 0, 0, 0);
+ w = f2(w);
+ }
+
+ for(i = 0; i < 256; ++i) {
+ u8 b;
+
+ b = fwd_affine(fi((u8)i));
+ w = bytes2word(f2(b), b, b, f3(b));
+
+ /* tables for a normal encryption round */
+ ft_tab[0][i] = w;
+ ft_tab[1][i] = upr(w, 1);
+ ft_tab[2][i] = upr(w, 2);
+ ft_tab[3][i] = upr(w, 3);
+ w = bytes2word(b, 0, 0, 0);
+
+ /*
+ * tables for last encryption round
+ * (may also be used in the key schedule)
+ */
+ fl_tab[0][i] = w;
+ fl_tab[1][i] = upr(w, 1);
+ fl_tab[2][i] = upr(w, 2);
+ fl_tab[3][i] = upr(w, 3);
+
+ /*
+ * table for key schedule if fl_tab above is
+ * not of the required form
+ */
+ ls_tab[0][i] = w;
+ ls_tab[1][i] = upr(w, 1);
+ ls_tab[2][i] = upr(w, 2);
+ ls_tab[3][i] = upr(w, 3);
+
+ b = fi(inv_affine((u8)i));
+ w = bytes2word(fe(b), f9(b), fd(b), fb(b));
+
+ /* tables for the inverse mix column operation */
+ im_tab[0][b] = w;
+ im_tab[1][b] = upr(w, 1);
+ im_tab[2][b] = upr(w, 2);
+ im_tab[3][b] = upr(w, 3);
+
+ /* tables for a normal decryption round */
+ it_tab[0][i] = w;
+ it_tab[1][i] = upr(w,1);
+ it_tab[2][i] = upr(w,2);
+ it_tab[3][i] = upr(w,3);
+
+ w = bytes2word(b, 0, 0, 0);
+
+ /* tables for last decryption round */
+ il_tab[0][i] = w;
+ il_tab[1][i] = upr(w,1);
+ il_tab[2][i] = upr(w,2);
+ il_tab[3][i] = upr(w,3);
+ }
+}
+
+#define four_tables(x,tab,vf,rf,c) \
+( tab[0][bval(vf(x,0,c),rf(0,c))] ^ \
+ tab[1][bval(vf(x,1,c),rf(1,c))] ^ \
+ tab[2][bval(vf(x,2,c),rf(2,c))] ^ \
+ tab[3][bval(vf(x,3,c),rf(3,c))] \
+)
+
+#define vf1(x,r,c) (x)
+#define rf1(r,c) (r)
+#define rf2(r,c) ((r-c)&3)
+
+#define inv_mcol(x) four_tables(x,im_tab,vf1,rf1,0)
+#define ls_box(x,c) four_tables(x,fl_tab,vf1,rf2,c)
+
+#define ff(x) inv_mcol(x)
+
+#define ke4(k,i) \
+{ \
+ k[4*(i)+4] = ss[0] ^= ls_box(ss[3],3) ^ rcon_tab[i]; \
+ k[4*(i)+5] = ss[1] ^= ss[0]; \
+ k[4*(i)+6] = ss[2] ^= ss[1]; \
+ k[4*(i)+7] = ss[3] ^= ss[2]; \
+}
+
+#define kel4(k,i) \
+{ \
+ k[4*(i)+4] = ss[0] ^= ls_box(ss[3],3) ^ rcon_tab[i]; \
+ k[4*(i)+5] = ss[1] ^= ss[0]; \
+ k[4*(i)+6] = ss[2] ^= ss[1]; k[4*(i)+7] = ss[3] ^= ss[2]; \
+}
+
+#define ke6(k,i) \
+{ \
+ k[6*(i)+ 6] = ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \
+ k[6*(i)+ 7] = ss[1] ^= ss[0]; \
+ k[6*(i)+ 8] = ss[2] ^= ss[1]; \
+ k[6*(i)+ 9] = ss[3] ^= ss[2]; \
+ k[6*(i)+10] = ss[4] ^= ss[3]; \
+ k[6*(i)+11] = ss[5] ^= ss[4]; \
+}
+
+#define kel6(k,i) \
+{ \
+ k[6*(i)+ 6] = ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \
+ k[6*(i)+ 7] = ss[1] ^= ss[0]; \
+ k[6*(i)+ 8] = ss[2] ^= ss[1]; \
+ k[6*(i)+ 9] = ss[3] ^= ss[2]; \
+}
+
+#define ke8(k,i) \
+{ \
+ k[8*(i)+ 8] = ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \
+ k[8*(i)+ 9] = ss[1] ^= ss[0]; \
+ k[8*(i)+10] = ss[2] ^= ss[1]; \
+ k[8*(i)+11] = ss[3] ^= ss[2]; \
+ k[8*(i)+12] = ss[4] ^= ls_box(ss[3],0); \
+ k[8*(i)+13] = ss[5] ^= ss[4]; \
+ k[8*(i)+14] = ss[6] ^= ss[5]; \
+ k[8*(i)+15] = ss[7] ^= ss[6]; \
+}
+
+#define kel8(k,i) \
+{ \
+ k[8*(i)+ 8] = ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \
+ k[8*(i)+ 9] = ss[1] ^= ss[0]; \
+ k[8*(i)+10] = ss[2] ^= ss[1]; \
+ k[8*(i)+11] = ss[3] ^= ss[2]; \
+}
+
+#define kdf4(k,i) \
+{ \
+ ss[0] = ss[0] ^ ss[2] ^ ss[1] ^ ss[3]; \
+ ss[1] = ss[1] ^ ss[3]; \
+ ss[2] = ss[2] ^ ss[3]; \
+ ss[3] = ss[3]; \
+ ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \
+ ss[i % 4] ^= ss[4]; \
+ ss[4] ^= k[4*(i)]; \
+ k[4*(i)+4] = ff(ss[4]); \
+ ss[4] ^= k[4*(i)+1]; \
+ k[4*(i)+5] = ff(ss[4]); \
+ ss[4] ^= k[4*(i)+2]; \
+ k[4*(i)+6] = ff(ss[4]); \
+ ss[4] ^= k[4*(i)+3]; \
+ k[4*(i)+7] = ff(ss[4]); \
+}
+
+#define kd4(k,i) \
+{ \
+ ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \
+ ss[i % 4] ^= ss[4]; \
+ ss[4] = ff(ss[4]); \
+ k[4*(i)+4] = ss[4] ^= k[4*(i)]; \
+ k[4*(i)+5] = ss[4] ^= k[4*(i)+1]; \
+ k[4*(i)+6] = ss[4] ^= k[4*(i)+2]; \
+ k[4*(i)+7] = ss[4] ^= k[4*(i)+3]; \
+}
+
+#define kdl4(k,i) \
+{ \
+ ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \
+ ss[i % 4] ^= ss[4]; \
+ k[4*(i)+4] = (ss[0] ^= ss[1]) ^ ss[2] ^ ss[3]; \
+ k[4*(i)+5] = ss[1] ^ ss[3]; \
+ k[4*(i)+6] = ss[0]; \
+ k[4*(i)+7] = ss[1]; \
+}
+
+#define kdf6(k,i) \
+{ \
+ ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \
+ k[6*(i)+ 6] = ff(ss[0]); \
+ ss[1] ^= ss[0]; \
+ k[6*(i)+ 7] = ff(ss[1]); \
+ ss[2] ^= ss[1]; \
+ k[6*(i)+ 8] = ff(ss[2]); \
+ ss[3] ^= ss[2]; \
+ k[6*(i)+ 9] = ff(ss[3]); \
+ ss[4] ^= ss[3]; \
+ k[6*(i)+10] = ff(ss[4]); \
+ ss[5] ^= ss[4]; \
+ k[6*(i)+11] = ff(ss[5]); \
+}
+
+#define kd6(k,i) \
+{ \
+ ss[6] = ls_box(ss[5],3) ^ rcon_tab[i]; \
+ ss[0] ^= ss[6]; ss[6] = ff(ss[6]); \
+ k[6*(i)+ 6] = ss[6] ^= k[6*(i)]; \
+ ss[1] ^= ss[0]; \
+ k[6*(i)+ 7] = ss[6] ^= k[6*(i)+ 1]; \
+ ss[2] ^= ss[1]; \
+ k[6*(i)+ 8] = ss[6] ^= k[6*(i)+ 2]; \
+ ss[3] ^= ss[2]; \
+ k[6*(i)+ 9] = ss[6] ^= k[6*(i)+ 3]; \
+ ss[4] ^= ss[3]; \
+ k[6*(i)+10] = ss[6] ^= k[6*(i)+ 4]; \
+ ss[5] ^= ss[4]; \
+ k[6*(i)+11] = ss[6] ^= k[6*(i)+ 5]; \
+}
+
+#define kdl6(k,i) \
+{ \
+ ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \
+ k[6*(i)+ 6] = ss[0]; \
+ ss[1] ^= ss[0]; \
+ k[6*(i)+ 7] = ss[1]; \
+ ss[2] ^= ss[1]; \
+ k[6*(i)+ 8] = ss[2]; \
+ ss[3] ^= ss[2]; \
+ k[6*(i)+ 9] = ss[3]; \
+}
+
+#define kdf8(k,i) \
+{ \
+ ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \
+ k[8*(i)+ 8] = ff(ss[0]); \
+ ss[1] ^= ss[0]; \
+ k[8*(i)+ 9] = ff(ss[1]); \
+ ss[2] ^= ss[1]; \
+ k[8*(i)+10] = ff(ss[2]); \
+ ss[3] ^= ss[2]; \
+ k[8*(i)+11] = ff(ss[3]); \
+ ss[4] ^= ls_box(ss[3],0); \
+ k[8*(i)+12] = ff(ss[4]); \
+ ss[5] ^= ss[4]; \
+ k[8*(i)+13] = ff(ss[5]); \
+ ss[6] ^= ss[5]; \
+ k[8*(i)+14] = ff(ss[6]); \
+ ss[7] ^= ss[6]; \
+ k[8*(i)+15] = ff(ss[7]); \
+}
+
+#define kd8(k,i) \
+{ \
+ u32 __g = ls_box(ss[7],3) ^ rcon_tab[i]; \
+ ss[0] ^= __g; \
+ __g = ff(__g); \
+ k[8*(i)+ 8] = __g ^= k[8*(i)]; \
+ ss[1] ^= ss[0]; \
+ k[8*(i)+ 9] = __g ^= k[8*(i)+ 1]; \
+ ss[2] ^= ss[1]; \
+ k[8*(i)+10] = __g ^= k[8*(i)+ 2]; \
+ ss[3] ^= ss[2]; \
+ k[8*(i)+11] = __g ^= k[8*(i)+ 3]; \
+ __g = ls_box(ss[3],0); \
+ ss[4] ^= __g; \
+ __g = ff(__g); \
+ k[8*(i)+12] = __g ^= k[8*(i)+ 4]; \
+ ss[5] ^= ss[4]; \
+ k[8*(i)+13] = __g ^= k[8*(i)+ 5]; \
+ ss[6] ^= ss[5]; \
+ k[8*(i)+14] = __g ^= k[8*(i)+ 6]; \
+ ss[7] ^= ss[6]; \
+ k[8*(i)+15] = __g ^= k[8*(i)+ 7]; \
+}
+
+#define kdl8(k,i) \
+{ \
+ ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \
+ k[8*(i)+ 8] = ss[0]; \
+ ss[1] ^= ss[0]; \
+ k[8*(i)+ 9] = ss[1]; \
+ ss[2] ^= ss[1]; \
+ k[8*(i)+10] = ss[2]; \
+ ss[3] ^= ss[2]; \
+ k[8*(i)+11] = ss[3]; \
+}
+
+static int
+aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags)
+{
+ int i;
+ u32 ss[8];
+ struct aes_ctx *ctx = ctx_arg;
+
+ /* encryption schedule */
+
+ ctx->ekey[0] = ss[0] = u32_in(in_key);
+ ctx->ekey[1] = ss[1] = u32_in(in_key + 4);
+ ctx->ekey[2] = ss[2] = u32_in(in_key + 8);
+ ctx->ekey[3] = ss[3] = u32_in(in_key + 12);
+
+ switch(key_len) {
+ case 16:
+ for (i = 0; i < 9; i++)
+ ke4(ctx->ekey, i);
+ kel4(ctx->ekey, 9);
+ ctx->rounds = 10;
+ break;
+
+ case 24:
+ ctx->ekey[4] = ss[4] = u32_in(in_key + 16);
+ ctx->ekey[5] = ss[5] = u32_in(in_key + 20);
+ for (i = 0; i < 7; i++)
+ ke6(ctx->ekey, i);
+ kel6(ctx->ekey, 7);
+ ctx->rounds = 12;
+ break;
+
+ case 32:
+ ctx->ekey[4] = ss[4] = u32_in(in_key + 16);
+ ctx->ekey[5] = ss[5] = u32_in(in_key + 20);
+ ctx->ekey[6] = ss[6] = u32_in(in_key + 24);
+ ctx->ekey[7] = ss[7] = u32_in(in_key + 28);
+ for (i = 0; i < 6; i++)
+ ke8(ctx->ekey, i);
+ kel8(ctx->ekey, 6);
+ ctx->rounds = 14;
+ break;
+
+ default:
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+ }
+
+ /* decryption schedule */
+
+ ctx->dkey[0] = ss[0] = u32_in(in_key);
+ ctx->dkey[1] = ss[1] = u32_in(in_key + 4);
+ ctx->dkey[2] = ss[2] = u32_in(in_key + 8);
+ ctx->dkey[3] = ss[3] = u32_in(in_key + 12);
+
+ switch (key_len) {
+ case 16:
+ kdf4(ctx->dkey, 0);
+ for (i = 1; i < 9; i++)
+ kd4(ctx->dkey, i);
+ kdl4(ctx->dkey, 9);
+ break;
+
+ case 24:
+ ctx->dkey[4] = ff(ss[4] = u32_in(in_key + 16));
+ ctx->dkey[5] = ff(ss[5] = u32_in(in_key + 20));
+ kdf6(ctx->dkey, 0);
+ for (i = 1; i < 7; i++)
+ kd6(ctx->dkey, i);
+ kdl6(ctx->dkey, 7);
+ break;
+
+ case 32:
+ ctx->dkey[4] = ff(ss[4] = u32_in(in_key + 16));
+ ctx->dkey[5] = ff(ss[5] = u32_in(in_key + 20));
+ ctx->dkey[6] = ff(ss[6] = u32_in(in_key + 24));
+ ctx->dkey[7] = ff(ss[7] = u32_in(in_key + 28));
+ kdf8(ctx->dkey, 0);
+ for (i = 1; i < 6; i++)
+ kd8(ctx->dkey, i);
+ kdl8(ctx->dkey, 6);
+ break;
+ }
+ return 0;
+}
+
+static inline void aes_encrypt(void *ctx, u8 *dst, const u8 *src)
+{
+ aes_enc_blk(src, dst, ctx);
+}
+static inline void aes_decrypt(void *ctx, u8 *dst, const u8 *src)
+{
+ aes_dec_blk(src, dst, ctx);
+}
+
+
+static struct crypto_alg aes_alg = {
+ .cra_name = "aes",
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cia_setkey = aes_set_key,
+ .cia_encrypt = aes_encrypt,
+ .cia_decrypt = aes_decrypt
+ }
+ }
+};
+
+static int __init aes_init(void)
+{
+ gen_tabs();
+ return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+ crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, i586 asm optimized");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Fruhwirth Clemens, James Morris, Brian Gladman, Adam Richter");
+MODULE_ALIAS("aes");
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
new file mode 100644
index 0000000..28e6203
--- /dev/null
+++ b/arch/i386/defconfig
@@ -0,0 +1,1247 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_GENERIC_ISA_DMA=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+CONFIG_MPENTIUM4=y
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+# CONFIG_HPET_TIMER is not set
+# CONFIG_HPET_EMULATE_RTC is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_TSC=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_NONFATAL=y
+CONFIG_X86_MCE_P4THERMAL=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+# CONFIG_EFI is not set
+CONFIG_IRQBALANCE=y
+CONFIG_HAVE_DEC_LOCK=y
+# CONFIG_REGPARM is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_SOFTWARE_SUSPEND=y
+# CONFIG_PM_DISK is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_SLEEP_PROC_FS=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_X86_PM_TIMER is not set
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+# CONFIG_PCI_USE_VECTOR is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+CONFIG_PCMCIA_PROBE=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_FW_LOADER=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_CML1=y
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+# CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_LBD=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASKFILE_IO=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_ADMA=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_DPT_I2O=m
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_MEGARAID is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_SCSI_ATA_PIIX=y
+# CONFIG_SCSI_SATA_PROMISE is not set
+CONFIG_SCSI_SATA_SX4=m
+# CONFIG_SCSI_SATA_SIL is not set
+CONFIG_SCSI_SATA_SIS=m
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394_CMP is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_LIMIT=y
+CONFIG_IP_NF_MATCH_IPRANGE=y
+CONFIG_IP_NF_MATCH_MAC=y
+CONFIG_IP_NF_MATCH_PKTTYPE=y
+CONFIG_IP_NF_MATCH_MARK=y
+CONFIG_IP_NF_MATCH_MULTIPORT=y
+CONFIG_IP_NF_MATCH_TOS=y
+CONFIG_IP_NF_MATCH_RECENT=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_DSCP=y
+CONFIG_IP_NF_MATCH_AH_ESP=y
+CONFIG_IP_NF_MATCH_LENGTH=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_MATCH_TCPMSS=y
+CONFIG_IP_NF_MATCH_HELPER=y
+CONFIG_IP_NF_MATCH_STATE=y
+CONFIG_IP_NF_MATCH_CONNTRACK=y
+CONFIG_IP_NF_MATCH_OWNER=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_SAME=y
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=y
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_DSCP=y
+CONFIG_IP_NF_TARGET_MARK=y
+CONFIG_IP_NF_TARGET_CLASSIFY=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_RAW=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_ACPI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=y
+# CONFIG_AGP_ALI is not set
+# CONFIG_AGP_ATI is not set
+# CONFIG_AGP_AMD is not set
+# CONFIG_AGP_AMD64 is not set
+CONFIG_AGP_INTEL=y
+# CONFIG_AGP_NVIDIA is not set
+# CONFIG_AGP_SIS is not set
+# CONFIG_AGP_SWORKS is not set
+# CONFIG_AGP_VIA is not set
+# CONFIG_AGP_EFFICEON is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_GAMMA is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_I810 is not set
+CONFIG_DRM_I830=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_MWAVE is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+# CONFIG_VIDEO_SELECT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ISA devices
+#
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+
+#
+# PCI devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VX222 is not set
+
+#
+# ALSA USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_TEST is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_4KSTACKS=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_STD_RESOURCES=y
+CONFIG_PC=y
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
new file mode 100644
index 0000000..933787a
--- /dev/null
+++ b/arch/i386/kernel/Makefile
@@ -0,0 +1,71 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
+ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
+ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
+ doublefault.o quirks.o
+
+obj-y += cpu/
+obj-y += timers/
+obj-$(CONFIG_ACPI_BOOT) += acpi/
+obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
+obj-$(CONFIG_MCA) += mca.o
+obj-$(CONFIG_X86_MSR) += msr.o
+obj-$(CONFIG_X86_CPUID) += cpuid.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+obj-$(CONFIG_APM) += apm.o
+obj-$(CONFIG_X86_SMP) += smp.o smpboot.o
+obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
+obj-$(CONFIG_X86_MPPARSE) += mpparse.o
+obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
+obj-$(CONFIG_X86_IO_APIC) += io_apic.o
+obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
+obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_MODULES) += module.o
+obj-y += sysenter.o vsyscall.o
+obj-$(CONFIG_ACPI_SRAT) += srat.o
+obj-$(CONFIG_HPET_TIMER) += time_hpet.o
+obj-$(CONFIG_EFI) += efi.o efi_stub.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+EXTRA_AFLAGS := -traditional
+
+obj-$(CONFIG_SCx200) += scx200.o
+
+# vsyscall.o contains the vsyscall DSO images as __initdata.
+# We must build both images before we can assemble it.
+# Note: kbuild does not track this dependency due to usage of .incbin
+$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
+targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall.lds
+
+# The DSO images are built using a special linker script.
+quiet_cmd_syscall = SYSCALL $@
+ cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
+ -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1
+SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
+SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
+
+$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+ $(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO. With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds $(obj)/vsyscall-sysenter.o FORCE
+ $(call if_changed,syscall)
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
new file mode 100644
index 0000000..ee75cb2
--- /dev/null
+++ b/arch/i386/kernel/acpi/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_ACPI_BOOT) := boot.o
+obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
+obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
new file mode 100644
index 0000000..9ba0b95
--- /dev/null
+++ b/arch/i386/kernel/acpi/boot.c
@@ -0,0 +1,908 @@
+/*
+ * boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpspec.h>
+
+#ifdef CONFIG_X86_64
+
+static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+extern void __init clustered_apic_check(void);
+static inline int ioapic_setup_disabled(void) { return 0; }
+#include <asm/proto.h>
+
+#else /* X86 */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* X86 */
+
+#define BAD_MADT_ENTRY(entry, end) ( \
+ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
+ ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX "ACPI: "
+
+#ifdef CONFIG_ACPI_PCI
+int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
+int acpi_ht __initdata = 1; /* enable HT */
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+EXPORT_SYMBOL(acpi_strict);
+
+acpi_interrupt_flags acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
+#define MAX_MADT_ENTRIES 256
+u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
+ { [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+EXPORT_SYMBOL(x86_acpiid_to_apicid);
+
+/* --------------------------------------------------------------------------
+ Boot-time Configuration
+ -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259). This gets
+ * overriden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+#ifdef CONFIG_X86_64
+
+/* rely on all ACPI tables being in the direct mapping */
+char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+ if (!phys_addr || !size)
+ return NULL;
+
+ if (phys_addr < (end_pfn_map << PAGE_SHIFT))
+ return __va(phys_addr);
+
+ return NULL;
+}
+
+#else
+
+/*
+ * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
+ * to map the target physical address. The problem is that set_fixmap()
+ * provides a single page, and it is possible that the page is not
+ * sufficient.
+ * By using this area, we can map up to MAX_IO_APICS pages temporarily,
+ * i.e. until the next __va_range() call.
+ *
+ * Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
+ * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
+ * count idx down while incrementing the phys address.
+ */
+char *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+ unsigned long base, offset, mapped_size;
+ int idx;
+
+ if (phys + size < 8*1024*1024)
+ return __va(phys);
+
+ offset = phys & (PAGE_SIZE - 1);
+ mapped_size = PAGE_SIZE - offset;
+ set_fixmap(FIX_ACPI_END, phys);
+ base = fix_to_virt(FIX_ACPI_END);
+
+ /*
+ * Most cases can be covered by the below.
+ */
+ idx = FIX_ACPI_END;
+ while (mapped_size < size) {
+ if (--idx < FIX_ACPI_BEGIN)
+ return NULL; /* cannot handle this */
+ phys += PAGE_SIZE;
+ set_fixmap(idx, phys);
+ mapped_size += PAGE_SIZE;
+ }
+
+ return ((unsigned char *) base + offset);
+}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_mcfg *mcfg;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+ if (!mcfg) {
+ printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
+ return -ENODEV;
+ }
+
+ if (mcfg->base_reserved) {
+ printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+ return -ENODEV;
+ }
+
+ pci_mmcfg_base_addr = mcfg->base_address;
+
+ return 0;
+}
+#else
+#define acpi_parse_mcfg NULL
+#endif /* !CONFIG_PCI_MMCONFIG */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init
+acpi_parse_madt (
+ unsigned long phys_addr,
+ unsigned long size)
+{
+ struct acpi_table_madt *madt = NULL;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+ if (!madt) {
+ printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+ return -ENODEV;
+ }
+
+ if (madt->lapic_address) {
+ acpi_lapic_addr = (u64) madt->lapic_address;
+
+ printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+ madt->lapic_address);
+ }
+
+ acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+
+ return 0;
+}
+
+
+static int __init
+acpi_parse_lapic (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic *processor = NULL;
+
+ processor = (struct acpi_table_lapic*) header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* no utility in registering a disabled processor */
+ if (processor->flags.enabled == 0)
+ return 0;
+
+ x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
+
+ mp_register_lapic (
+ processor->id, /* APIC ID */
+ processor->flags.enabled); /* Enabled? */
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+
+ lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+
+ if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+ return -EINVAL;
+
+ acpi_lapic_addr = lapic_addr_ovr->address;
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+
+ lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+
+ if (BAD_MADT_ENTRY(lapic_nmi, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (lapic_nmi->lint != 1)
+ printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+ return 0;
+}
+
+
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+
+static int __init
+acpi_parse_ioapic (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_ioapic *ioapic = NULL;
+
+ ioapic = (struct acpi_table_ioapic*) header;
+
+ if (BAD_MADT_ENTRY(ioapic, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ mp_register_ioapic (
+ ioapic->id,
+ ioapic->address,
+ ioapic->global_irq_base);
+
+ return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+{
+ if (trigger == 0) /* compatible SCI trigger is level */
+ trigger = 3;
+
+ if (polarity == 0) /* compatible SCI polarity is low */
+ polarity = 3;
+
+ /* Command-line over-ride via acpi_sci= */
+ if (acpi_sci_flags.trigger)
+ trigger = acpi_sci_flags.trigger;
+
+ if (acpi_sci_flags.polarity)
+ polarity = acpi_sci_flags.polarity;
+
+ /*
+ * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+ * If GSI is < 16, this will update its flags,
+ * else it will create a new mp_irqs[] entry.
+ */
+ mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+
+ /*
+ * stash over-ride to indicate we've been here
+ * and for later update of acpi_fadt
+ */
+ acpi_sci_override_gsi = gsi;
+ return;
+}
+
+static int __init
+acpi_parse_int_src_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_int_src_ovr *intsrc = NULL;
+
+ intsrc = (struct acpi_table_int_src_ovr*) header;
+
+ if (BAD_MADT_ENTRY(intsrc, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (intsrc->bus_irq == acpi_fadt.sci_int) {
+ acpi_sci_ioapic_setup(intsrc->global_irq,
+ intsrc->flags.polarity, intsrc->flags.trigger);
+ return 0;
+ }
+
+ if (acpi_skip_timer_override &&
+ intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ return 0;
+ }
+
+ mp_override_legacy_irq (
+ intsrc->bus_irq,
+ intsrc->flags.polarity,
+ intsrc->flags.trigger,
+ intsrc->global_irq);
+
+ return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_nmi_src *nmi_src = NULL;
+
+ nmi_src = (struct acpi_table_nmi_src*) header;
+
+ if (BAD_MADT_ENTRY(nmi_src, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* TBD: Support nimsrc entries? */
+
+ return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef CONFIG_ACPI_BUS
+
+/*
+ * acpi_pic_sci_set_trigger()
+ *
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init
+acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+ unsigned int mask = 1 << irq;
+ unsigned int old, new;
+
+ /* Real old ELCR mask */
+ old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+ /*
+ * If we use ACPI to set PCI irq's, then we should clear ELCR
+ * since we will set it correctly as we enable the PCI irq
+ * routing.
+ */
+ new = acpi_noirq ? old : 0;
+
+ /*
+ * Update SCI information in the ELCR, it isn't in the PCI
+ * routing tables..
+ */
+ switch (trigger) {
+ case 1: /* Edge - clear */
+ new &= ~mask;
+ break;
+ case 3: /* Level - set */
+ new |= mask;
+ break;
+ }
+
+ if (old == new)
+ return;
+
+ printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+ outb(new, 0x4d0);
+ outb(new >> 8, 0x4d1);
+}
+
+
+#endif /* CONFIG_ACPI_BUS */
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+ if (use_pci_vector() && !platform_legacy_irq(gsi))
+ *irq = IO_APIC_VECTOR(gsi);
+ else
+#endif
+ *irq = gsi;
+ return 0;
+}
+
+unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+{
+ unsigned int irq;
+ unsigned int plat_gsi = gsi;
+
+#ifdef CONFIG_PCI
+ /*
+ * Make sure all (legacy) PCI IRQs are set as level-triggered.
+ */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+ extern void eisa_set_level_irq(unsigned int irq);
+
+ if (edge_level == ACPI_LEVEL_SENSITIVE)
+ eisa_set_level_irq(gsi);
+ }
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
+ plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+ }
+#endif
+ acpi_gsi_to_irq(plat_gsi, &irq);
+ return irq;
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+/*
+ * ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+ /* TBD */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+ /* TBD */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static unsigned long __init
+acpi_scan_rsdp (
+ unsigned long start,
+ unsigned long length)
+{
+ unsigned long offset = 0;
+ unsigned long sig_len = sizeof("RSD PTR ") - 1;
+
+ /*
+ * Scan all 16-byte boundaries of the physical memory region for the
+ * RSDP signature.
+ */
+ for (offset = 0; offset < length; offset += 16) {
+ if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+ continue;
+ return (start + offset);
+ }
+
+ return 0;
+}
+
+static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_sbf *sb;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+ if (!sb) {
+ printk(KERN_WARNING PREFIX "Unable to map SBF\n");
+ return -ENODEV;
+ }
+
+ sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+ return 0;
+}
+
+
+#ifdef CONFIG_HPET_TIMER
+
+static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+{
+ struct acpi_table_hpet *hpet_tbl;
+
+ if (!phys || !size)
+ return -EINVAL;
+
+ hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+ if (!hpet_tbl) {
+ printk(KERN_WARNING PREFIX "Unable to map HPET\n");
+ return -ENODEV;
+ }
+
+ if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+ printk(KERN_WARNING PREFIX "HPET timers must be located in "
+ "memory.\n");
+ return -1;
+ }
+
+#ifdef CONFIG_X86_64
+ vxtime.hpet_address = hpet_tbl->addr.addrl |
+ ((long) hpet_tbl->addr.addrh << 32);
+
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, vxtime.hpet_address);
+#else /* X86 */
+ {
+ extern unsigned long hpet_address;
+
+ hpet_address = hpet_tbl->addr.addrl;
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, hpet_address);
+ }
+#endif /* X86 */
+
+ return 0;
+}
+#else
+#define acpi_parse_hpet NULL
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern u32 pmtmr_ioport;
+#endif
+
+static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+{
+ struct fadt_descriptor_rev2 *fadt = NULL;
+
+ fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
+ if(!fadt) {
+ printk(KERN_WARNING PREFIX "Unable to map FADT\n");
+ return 0;
+ }
+
+#ifdef CONFIG_ACPI_INTERPRETER
+ /* initialize sci_int early for INT_SRC_OVR MADT parsing */
+ acpi_fadt.sci_int = fadt->sci_int;
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+ /* detect the location of the ACPI PM Timer */
+ if (fadt->revision >= FADT2_REVISION_ID) {
+ /* FADT rev. 2 */
+ if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+ return 0;
+
+ pmtmr_ioport = fadt->xpm_tmr_blk.address;
+ } else {
+ /* FADT rev. 1 */
+ pmtmr_ioport = fadt->V1_pm_tmr_blk;
+ }
+ if (pmtmr_ioport)
+ printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+ return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+ unsigned long rsdp_phys = 0;
+
+ if (efi_enabled) {
+ if (efi.acpi20)
+ return __pa(efi.acpi20);
+ else if (efi.acpi)
+ return __pa(efi.acpi);
+ }
+ /*
+ * Scan memory looking for the RSDP signature. First search EBDA (low
+ * memory) paragraphs and then search upper memory (E0000-FFFFF).
+ */
+ rsdp_phys = acpi_scan_rsdp (0, 0x400);
+ if (!rsdp_phys)
+ rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+
+ return rsdp_phys;
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_lapic_entries(void)
+{
+ int count;
+
+ /*
+ * Note that the LAPIC address is obtained from the MADT (32-bit value)
+ * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ */
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+ return count;
+ }
+
+ mp_register_lapic_address(acpi_lapic_addr);
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+ MAX_APICS);
+ if (!count) {
+ printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return -ENODEV;
+ }
+ else if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+ return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_ioapic_entries(void)
+{
+ int count;
+
+ /*
+ * ACPI interpreter is required to complete interrupt setup,
+ * so if it is off, don't enumerate the io-apics with ACPI.
+ * If MPS is present, it will handle them,
+ * otherwise the system will stay in PIC mode
+ */
+ if (acpi_disabled || acpi_noirq) {
+ return -ENODEV;
+ }
+
+ /*
+ * if "noapic" boot option, don't look for IO-APICs
+ */
+ if (skip_ioapic_setup) {
+ printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+ "due to 'noapic' option.\n");
+ return -ENODEV;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+ if (!count) {
+ printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+ return -ENODEV;
+ }
+ else if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+ return count;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ /*
+ * If BIOS did not supply an INT_SRC_OVR for the SCI
+ * pretend we got one so we can set the SCI flags.
+ */
+ if (!acpi_sci_override_gsi)
+ acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+
+ /* Fill in identity legacy mapings where no override */
+ mp_config_acpi_legacy_irqs();
+
+ count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+ return -1;
+}
+#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+
+
+static void __init
+acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ int count, error;
+
+ count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+ if (count >= 1) {
+
+ /*
+ * Parse MADT LAPIC entries
+ */
+ error = acpi_parse_madt_lapic_entries();
+ if (!error) {
+ acpi_lapic = 1;
+
+ /*
+ * Parse MADT IO-APIC entries
+ */
+ error = acpi_parse_madt_ioapic_entries();
+ if (!error) {
+ acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+ acpi_irq_balance_set(NULL);
+ acpi_ioapic = 1;
+
+ smp_found_config = 1;
+ clustered_apic_check();
+ }
+ }
+ if (error == -EINVAL) {
+ /*
+ * Dell Precision Workstation 410, 610 come here.
+ */
+ printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+ disable_acpi();
+ }
+ }
+#endif
+ return;
+}
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ * called from setup_arch(), always.
+ * 1. checksums all tables
+ * 2. enumerates lapics
+ * 3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ * acpi_lapic = 1 if LAPIC found
+ * acpi_ioapic = 1 if IOAPIC found
+ * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ * if acpi_blacklisted() acpi_disabled = 1;
+ * acpi_irq_model=...
+ * ...
+ *
+ * return value: (currently ignored)
+ * 0: success
+ * !0: failure
+ */
+
+int __init
+acpi_boot_table_init(void)
+{
+ int error;
+
+ /*
+ * If acpi_disabled, bail out
+ * One exception: acpi=ht continues far enough to enumerate LAPICs
+ */
+ if (acpi_disabled && !acpi_ht)
+ return 1;
+
+ /*
+ * Initialize the ACPI boot-time table parser.
+ */
+ error = acpi_table_init();
+ if (error) {
+ disable_acpi();
+ return error;
+ }
+
+#ifdef __i386__
+ check_acpi_pci();
+#endif
+
+ acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+ /*
+ * blacklist may disable ACPI entirely
+ */
+ error = acpi_blacklisted();
+ if (error) {
+ extern int acpi_force;
+
+ if (acpi_force) {
+ printk(KERN_WARNING PREFIX "acpi=force override\n");
+ } else {
+ printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+ disable_acpi();
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+
+int __init acpi_boot_init(void)
+{
+ /*
+ * If acpi_disabled, bail out
+ * One exception: acpi=ht continues far enough to enumerate LAPICs
+ */
+ if (acpi_disabled && !acpi_ht)
+ return 1;
+
+ acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+ /*
+ * set sci_int and PM timer address
+ */
+ acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+
+ /*
+ * Process the Multiple APIC Description Table (MADT), if present
+ */
+ acpi_process_madt();
+
+ acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+ acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+
+ return 0;
+}
+
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
new file mode 100644
index 0000000..726a5ca
--- /dev/null
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -0,0 +1,51 @@
+/*
+ * Do early PCI probing for bug detection when the main PCI subsystem is
+ * not up yet.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <asm/acpi.h>
+
+static int __init check_bridge(int vendor, int device)
+{
+ /* According to Nvidia all timer overrides are bogus. Just ignore
+ them all. */
+ if (vendor == PCI_VENDOR_ID_NVIDIA) {
+ acpi_skip_timer_override = 1;
+ }
+ return 0;
+}
+
+void __init check_acpi_pci(void)
+{
+ int num,slot,func;
+
+ /* Assume the machine supports type 1. If not it will
+ always read ffffffff and should not have any side effect. */
+
+ /* Poor man's PCI discovery */
+ for (num = 0; num < 32; num++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 class;
+ u32 vendor;
+ class = read_pci_config(num,slot,func,
+ PCI_CLASS_REVISION);
+ if (class == 0xffffffff)
+ break;
+
+ if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ vendor = read_pci_config(num, slot, func,
+ PCI_VENDOR_ID);
+
+ if (check_bridge(vendor&0xffff, vendor >> 16))
+ return;
+ }
+
+ }
+ }
+}
diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c
new file mode 100644
index 0000000..28bb051
--- /dev/null
+++ b/arch/i386/kernel/acpi/sleep.c
@@ -0,0 +1,93 @@
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ * Copyright (C) 2001-2003 Patrick Mochel
+ * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+/* address in low memory of the wakeup routine. */
+unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_video_flags;
+extern char wakeup_start, wakeup_end;
+
+extern void zap_low_mappings(void);
+
+extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
+
+static void init_low_mapping(pgd_t *pgd, int pgd_limit)
+{
+ int pgd_ofs = 0;
+
+ while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
+ set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD));
+ pgd_ofs++, pgd++;
+ }
+ flush_tlb_all();
+}
+
+/**
+ * acpi_save_state_mem - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int acpi_save_state_mem (void)
+{
+ if (!acpi_wakeup_address)
+ return 1;
+ init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
+ memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+ acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+ return 0;
+}
+
+/*
+ * acpi_restore_state - undo effects of acpi_save_state_mem
+ */
+void acpi_restore_state_mem (void)
+{
+ zap_low_mappings();
+}
+
+/**
+ * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ *
+ * We allocate a page from the first 1MB of memory for the wakeup
+ * routine for when we come back from a sleep state. The
+ * runtime allocator allows specification of <16MB pages, but not
+ * <1MB pages.
+ */
+void __init acpi_reserve_bootmem(void)
+{
+ if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) {
+ printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n");
+ return;
+ }
+
+ acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
+ if (!acpi_wakeup_address)
+ printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+ while ((str != NULL) && (*str != '\0')) {
+ if (strncmp(str, "s3_bios", 7) == 0)
+ acpi_video_flags = 1;
+ if (strncmp(str, "s3_mode", 7) == 0)
+ acpi_video_flags |= 2;
+ str = strchr(str, ',');
+ if (str != NULL)
+ str += strspn(str, ", \t");
+ }
+ return 1;
+}
+
+
+__setup("acpi_sleep=", acpi_sleep_setup);
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
new file mode 100644
index 0000000..39d3248
--- /dev/null
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -0,0 +1,318 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls.
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+#
+
+ALIGN
+ .align 4096
+ENTRY(wakeup_start)
+wakeup_code:
+ wakeup_code_start = .
+ .code16
+
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'L', %fs:(0x10)
+
+ cli
+ cld
+
+ # setup data segment
+ movw %cs, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+ mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
+ movw $0x0e00 + 'S', %fs:(0x12)
+
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ testl $1, video_flags - wakeup_code
+ jz 1f
+ lcall $0xc000,$3
+ movw %cs, %ax
+ movw %ax, %ds # Bios might have played with that
+ movw %ax, %ss
+1:
+
+ testl $2, video_flags - wakeup_code
+ jz 1f
+ mov video_mode - wakeup_code, %ax
+ call mode_set
+1:
+
+ # set up page table
+ movl $swapper_pg_dir-__PAGE_OFFSET, %eax
+ movl %eax, %cr3
+
+ testl $1, real_efer_save_restore - wakeup_code
+ jz 4f
+ # restore efer setting
+ movl real_save_efer_edx - wakeup_code, %edx
+ movl real_save_efer_eax - wakeup_code, %eax
+ mov $0xc0000080, %ecx
+ wrmsr
+4:
+ # make sure %cr4 is set correctly (features, etc)
+ movl real_save_cr4 - wakeup_code, %eax
+ movl %eax, %cr4
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'i', %fs:(0x12)
+
+ # need a gdt
+ lgdt real_save_gdt - wakeup_code
+
+ movl real_save_cr0 - wakeup_code, %eax
+ movl %eax, %cr0
+ jmp 1f
+1:
+ movw $0x0e00 + 'n', %fs:(0x14)
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ ljmpl $__KERNEL_CS,$wakeup_pmode_return
+
+real_save_gdt: .word 0
+ .long 0
+real_save_cr0: .long 0
+real_save_cr3: .long 0
+real_save_cr4: .long 0
+real_magic: .long 0
+video_mode: .long 0
+video_flags: .long 0
+real_efer_save_restore: .long 0
+real_save_efer_edx: .long 0
+real_save_efer_eax: .long 0
+
+bogus_real_magic:
+ movw $0x0e00 + 'B', %fs:(0x12)
+ jmp bogus_real_magic
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+ movw %ax, %bx
+#if 0
+ cmpb $0xff, %ah
+ jz setalias
+
+ testb $VIDEO_RECALC>>8, %ah
+ jnz _setrec
+
+ cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
+ jnc setres
+
+ cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
+ jz setspc
+
+ cmpb $VIDEO_FIRST_V7>>8, %ah
+ jz setv7
+#endif
+
+ cmpb $VIDEO_FIRST_VESA>>8, %ah
+ jnc check_vesa
+#if 0
+ orb %ah, %ah
+ jz setmenu
+#endif
+
+ decb %ah
+# jz setbios Add bios modes later
+
+setbad: clc
+ ret
+
+check_vesa:
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz _setbad # AH=0 if OK
+
+ stc
+ ret
+
+_setbad: jmp setbad
+
+ .code32
+ ALIGN
+
+.org 0x800
+wakeup_stack_begin: # Stack grows down
+
+.org 0xff0 # Just below end of page
+wakeup_stack:
+ENTRY(wakeup_end)
+
+.org 0x1000
+
+wakeup_pmode_return:
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+ movw $0x0e00 + 'u', 0xb8016
+
+ # reload the gdt, as we need the full 32 bit address
+ lgdt saved_gdt
+ lidt saved_idt
+ lldt saved_ldt
+ ljmp $(__KERNEL_CS),$1f
+1:
+ movl %cr3, %eax
+ movl %eax, %cr3
+ wbinvd
+
+ # and restore the stack ... but you need gdt for this to work
+ movl saved_context_esp, %esp
+
+ movl %cs:saved_magic, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_magic
+
+ # jump to place where we left off
+ movl saved_eip,%eax
+ jmp *%eax
+
+bogus_magic:
+ movw $0x0e00 + 'B', 0xb8018
+ jmp bogus_magic
+
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %eax: place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ENTRY(acpi_copy_wakeup_routine)
+
+ sgdt saved_gdt
+ sidt saved_idt
+ sldt saved_ldt
+ str saved_tss
+
+ movl nx_enabled, %edx
+ movl %edx, real_efer_save_restore - wakeup_start (%eax)
+ testl $1, real_efer_save_restore - wakeup_start (%eax)
+ jz 2f
+ # save efer setting
+ pushl %eax
+ movl %eax, %ebx
+ mov $0xc0000080, %ecx
+ rdmsr
+ movl %edx, real_save_efer_edx - wakeup_start (%ebx)
+ movl %eax, real_save_efer_eax - wakeup_start (%ebx)
+ popl %eax
+2:
+
+ movl %cr3, %edx
+ movl %edx, real_save_cr3 - wakeup_start (%eax)
+ movl %cr4, %edx
+ movl %edx, real_save_cr4 - wakeup_start (%eax)
+ movl %cr0, %edx
+ movl %edx, real_save_cr0 - wakeup_start (%eax)
+ sgdt real_save_gdt - wakeup_start (%eax)
+
+ movl saved_videomode, %edx
+ movl %edx, video_mode - wakeup_start (%eax)
+ movl acpi_video_flags, %edx
+ movl %edx, video_flags - wakeup_start (%eax)
+ movl $0x12345678, real_magic - wakeup_start (%eax)
+ movl $0x12345678, saved_magic
+ ret
+
+.data
+ALIGN
+ENTRY(saved_magic) .long 0
+ENTRY(saved_eip) .long 0
+
+save_registers:
+ leal 4(%esp), %eax
+ movl %eax, saved_context_esp
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl ; popl saved_context_eflags
+
+ movl $ret_point, saved_eip
+ ret
+
+
+restore_registers:
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+ pushl saved_context_eflags ; popfl
+ ret
+
+ENTRY(do_suspend_lowlevel)
+ call save_processor_state
+ call save_registers
+ pushl $3
+ call acpi_enter_sleep_state
+ addl $4, %esp
+ ret
+ .p2align 4,,7
+ret_point:
+ call restore_registers
+ call restore_processor_state
+ ret
+
+ENTRY(do_suspend_lowlevel_s4bios)
+ call save_processor_state
+ call save_registers
+ call acpi_enter_sleep_state_s4bios
+ ret
+
+ALIGN
+# saved registers
+saved_gdt: .long 0,0
+saved_idt: .long 0,0
+saved_ldt: .long 0
+saved_tss: .long 0
+
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
new file mode 100644
index 0000000..35c1751
--- /dev/null
+++ b/arch/i386/kernel/apic.c
@@ -0,0 +1,1278 @@
+/*
+ * Local APIC handling, local APIC timers
+ *
+ * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
+ * thanks to Eric Gilmore
+ * and Rolf G. Tews
+ * for testing these extensively.
+ * Maciej W. Rozycki : Various updates and fixes.
+ * Mikael Pettersson : Power Management for UP-APIC.
+ * Pavel Machek and
+ * Mikael Pettersson : PM converted to driver model.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+#include <asm/hpet.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+/*
+ * Debug level
+ */
+int apic_verbosity;
+
+
+static void apic_pm_activate(void);
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at vector %02x\n", irq);
+ /*
+ * Currently unexpected vectors happen only on SMP and APIC.
+ * We _must_ ack these because every local APIC has only N
+ * irq slots per priority level, and a 'hanging, unacked' IRQ
+ * holds up an irq slot - in excessive cases (when multiple
+ * unexpected vectors occur) that might lock up the APIC
+ * completely.
+ */
+ ack_APIC_irq();
+}
+
+void __init apic_intr_init(void)
+{
+#ifdef CONFIG_SMP
+ smp_intr_init();
+#endif
+ /* self generated IPI for local APIC timer */
+ set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ /* thermal monitor LVT interrupt */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+}
+
+/* Using APIC to generate smp_local_timer_interrupt? */
+int using_apic_timer = 0;
+
+static DEFINE_PER_CPU(int, prof_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_counter) = 1;
+
+static int enabled_via_apicbase;
+
+void enable_NMI_through_LVT0 (void * dummy)
+{
+ unsigned int v, ver;
+
+ ver = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(ver);
+ v = APIC_DM_NMI; /* unmask and set to NMI */
+ if (!APIC_INTEGRATED(ver)) /* 82489DX */
+ v |= APIC_LVT_LEVEL_TRIGGER;
+ apic_write_around(APIC_LVT0, v);
+}
+
+int get_physical_broadcast(void)
+{
+ unsigned int lvr, version;
+ lvr = apic_read(APIC_LVR);
+ version = GET_APIC_VERSION(lvr);
+ if (!APIC_INTEGRATED(version) || version >= 0x14)
+ return 0xff;
+ else
+ return 0xf;
+}
+
+int get_maxlvt(void)
+{
+ unsigned int v, ver, maxlvt;
+
+ v = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(v);
+ /* 82489DXs do not report # of LVT entries. */
+ maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2;
+ return maxlvt;
+}
+
+void clear_local_APIC(void)
+{
+ int maxlvt;
+ unsigned long v;
+
+ maxlvt = get_maxlvt();
+
+ /*
+ * Masking an LVT entry on a P6 can trigger a local APIC error
+ * if the vector is zero. Mask LVTERR first to prevent this.
+ */
+ if (maxlvt >= 3) {
+ v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
+ apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+ }
+ /*
+ * Careful: we have to set masks only first to deassert
+ * any level-triggered sources.
+ */
+ v = apic_read(APIC_LVTT);
+ apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ v = apic_read(APIC_LVT1);
+ apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+ if (maxlvt >= 4) {
+ v = apic_read(APIC_LVTPC);
+ apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+ }
+
+/* lets not touch this if we didn't frob it */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5) {
+ v = apic_read(APIC_LVTTHMR);
+ apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+ }
+#endif
+ /*
+ * Clean APIC state for other OSs:
+ */
+ apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+ apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+ if (maxlvt >= 3)
+ apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+ if (maxlvt >= 4)
+ apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5)
+ apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+#endif
+ v = GET_APIC_VERSION(apic_read(APIC_LVR));
+ if (APIC_INTEGRATED(v)) { /* !82489DX */
+ if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
+}
+
+void __init connect_bsp_APIC(void)
+{
+ if (pic_mode) {
+ /*
+ * Do not trust the local APIC being empty at bootup.
+ */
+ clear_local_APIC();
+ /*
+ * PIC mode, enable APIC mode in the IMCR, i.e.
+ * connect BSP's local APIC to INT and NMI lines.
+ */
+ apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+ "enabling APIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x01, 0x23);
+ }
+ enable_apic_mode();
+}
+
+void disconnect_bsp_APIC(void)
+{
+ if (pic_mode) {
+ /*
+ * Put the board back into PIC mode (has an effect
+ * only on certain older boards). Note that APIC
+ * interrupts, including IPIs, won't work beyond
+ * this point! The only exception are INIT IPIs.
+ */
+ apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+ "entering PIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x00, 0x23);
+ }
+}
+
+void disable_local_APIC(void)
+{
+ unsigned long value;
+
+ clear_local_APIC();
+
+ /*
+ * Disable APIC (implies clearing of registers
+ * for 82489DX!).
+ */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_SPIV_APIC_ENABLED;
+ apic_write_around(APIC_SPIV, value);
+
+ if (enabled_via_apicbase) {
+ unsigned int l, h;
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_ENABLE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
+}
+
+/*
+ * This is to verify that we're looking at a real local APIC.
+ * Check these against your board if the CPUs aren't getting
+ * started for no apparent reason.
+ */
+int __init verify_local_APIC(void)
+{
+ unsigned int reg0, reg1;
+
+ /*
+ * The version register is read-only in a real APIC.
+ */
+ reg0 = apic_read(APIC_LVR);
+ apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
+ apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
+ reg1 = apic_read(APIC_LVR);
+ apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
+
+ /*
+ * The two version reads above should print the same
+ * numbers. If the second one is different, then we
+ * poke at a non-APIC.
+ */
+ if (reg1 != reg0)
+ return 0;
+
+ /*
+ * Check if the version looks reasonably.
+ */
+ reg1 = GET_APIC_VERSION(reg0);
+ if (reg1 == 0x00 || reg1 == 0xff)
+ return 0;
+ reg1 = get_maxlvt();
+ if (reg1 < 0x02 || reg1 == 0xff)
+ return 0;
+
+ /*
+ * The ID register is read/write in a real APIC.
+ */
+ reg0 = apic_read(APIC_ID);
+ apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+
+ /*
+ * The next two are just to see if we have sane values.
+ * They're only really relevant if we're in Virtual Wire
+ * compatibility mode, but most boxes are anymore.
+ */
+ reg0 = apic_read(APIC_LVT0);
+ apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
+ reg1 = apic_read(APIC_LVT1);
+ apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
+
+ return 1;
+}
+
+void __init sync_Arb_IDs(void)
+{
+ /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
+ unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ if (ver >= 0x14) /* P4 or higher */
+ return;
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
+ apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
+ | APIC_DM_INIT);
+}
+
+extern void __error_in_apic_c (void);
+
+/*
+ * An initial setup of the virtual wire mode.
+ */
+void __init init_bsp_APIC(void)
+{
+ unsigned long value, ver;
+
+ /*
+ * Don't do the setup now if we have a SMP BIOS as the
+ * through-I/O-APIC virtual wire mode might be active.
+ */
+ if (smp_found_config || !cpu_has_apic)
+ return;
+
+ value = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(value);
+
+ /*
+ * Do not trust the local APIC being empty at bootup.
+ */
+ clear_local_APIC();
+
+ /*
+ * Enable APIC.
+ */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+
+ /* This bit is reserved on P4/Xeon and should be cleared */
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15))
+ value &= ~APIC_SPIV_FOCUS_DISABLED;
+ else
+ value |= APIC_SPIV_FOCUS_DISABLED;
+ value |= SPURIOUS_APIC_VECTOR;
+ apic_write_around(APIC_SPIV, value);
+
+ /*
+ * Set up the virtual wire mode.
+ */
+ apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ value = APIC_DM_NMI;
+ if (!APIC_INTEGRATED(ver)) /* 82489DX */
+ value |= APIC_LVT_LEVEL_TRIGGER;
+ apic_write_around(APIC_LVT1, value);
+}
+
+void __init setup_local_APIC (void)
+{
+ unsigned long oldvalue, value, ver, maxlvt;
+
+ /* Pound the ESR really hard over the head with a big hammer - mbligh */
+ if (esr_disable) {
+ apic_write(APIC_ESR, 0);
+ apic_write(APIC_ESR, 0);
+ apic_write(APIC_ESR, 0);
+ apic_write(APIC_ESR, 0);
+ }
+
+ value = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(value);
+
+ if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
+ __error_in_apic_c();
+
+ /*
+ * Double-check whether this APIC is really registered.
+ */
+ if (!apic_id_registered())
+ BUG();
+
+ /*
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+ init_apic_ldr();
+
+ /*
+ * Set Task Priority to 'accept all'. We never change this
+ * later on.
+ */
+ value = apic_read(APIC_TASKPRI);
+ value &= ~APIC_TPRI_MASK;
+ apic_write_around(APIC_TASKPRI, value);
+
+ /*
+ * Now that we are all set up, enable the APIC
+ */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ /*
+ * Enable APIC
+ */
+ value |= APIC_SPIV_APIC_ENABLED;
+
+ /*
+ * Some unknown Intel IO/APIC (or APIC) errata is biting us with
+ * certain networking cards. If high frequency interrupts are
+ * happening on a particular IOAPIC pin, plus the IOAPIC routing
+ * entry is masked/unmasked at a high rate as well then sooner or
+ * later IOAPIC line gets 'stuck', no more interrupts are received
+ * from the device. If focus CPU is disabled then the hang goes
+ * away, oh well :-(
+ *
+ * [ This bug can be reproduced easily with a level-triggered
+ * PCI Ne2000 networking cards and PII/PIII processors, dual
+ * BX chipset. ]
+ */
+ /*
+ * Actually disabling the focus CPU check just makes the hang less
+ * frequent as it makes the interrupt distributon model be more
+ * like LRU than MRU (the short-term load is more even across CPUs).
+ * See also the comment in end_level_ioapic_irq(). --macro
+ */
+#if 1
+ /* Enable focus processor (bit==0) */
+ value &= ~APIC_SPIV_FOCUS_DISABLED;
+#else
+ /* Disable focus processor (bit==1) */
+ value |= APIC_SPIV_FOCUS_DISABLED;
+#endif
+ /*
+ * Set spurious IRQ vector
+ */
+ value |= SPURIOUS_APIC_VECTOR;
+ apic_write_around(APIC_SPIV, value);
+
+ /*
+ * Set up LVT0, LVT1:
+ *
+ * set up through-local-APIC on the BP's LINT0. This is not
+ * strictly necessery in pure symmetric-IO mode, but sometimes
+ * we delegate interrupts to the 8259A.
+ */
+ /*
+ * TODO: set up through-local-APIC from through-I/O-APIC? --macro
+ */
+ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
+ if (!smp_processor_id() && (pic_mode || !value)) {
+ value = APIC_DM_EXTINT;
+ apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
+ smp_processor_id());
+ } else {
+ value = APIC_DM_EXTINT | APIC_LVT_MASKED;
+ apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
+ smp_processor_id());
+ }
+ apic_write_around(APIC_LVT0, value);
+
+ /*
+ * only the BP should see the LINT1 NMI signal, obviously.
+ */
+ if (!smp_processor_id())
+ value = APIC_DM_NMI;
+ else
+ value = APIC_DM_NMI | APIC_LVT_MASKED;
+ if (!APIC_INTEGRATED(ver)) /* 82489DX */
+ value |= APIC_LVT_LEVEL_TRIGGER;
+ apic_write_around(APIC_LVT1, value);
+
+ if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */
+ maxlvt = get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ oldvalue = apic_read(APIC_ESR);
+
+ value = ERROR_APIC_VECTOR; // enables sending errors
+ apic_write_around(APIC_LVTERR, value);
+ /*
+ * spec says clear errors after enabling vector.
+ */
+ if (maxlvt > 3)
+ apic_write(APIC_ESR, 0);
+ value = apic_read(APIC_ESR);
+ if (value != oldvalue)
+ apic_printk(APIC_VERBOSE, "ESR value before enabling "
+ "vector: 0x%08lx after: 0x%08lx\n",
+ oldvalue, value);
+ } else {
+ if (esr_disable)
+ /*
+ * Something untraceble is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk("Leaving ESR disabled.\n");
+ else
+ printk("No ESR for 82489DX.\n");
+ }
+
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ setup_apic_nmi_watchdog();
+ apic_pm_activate();
+}
+
+/*
+ * If Linux enabled the LAPIC against the BIOS default
+ * disable it down before re-entering the BIOS on shutdown.
+ * Otherwise the BIOS may get confused and not power-off.
+ */
+void lapic_shutdown(void)
+{
+ if (!cpu_has_apic || !enabled_via_apicbase)
+ return;
+
+ local_irq_disable();
+ disable_local_APIC();
+ local_irq_enable();
+}
+
+#ifdef CONFIG_PM
+
+static struct {
+ int active;
+ /* r/w apic fields */
+ unsigned int apic_id;
+ unsigned int apic_taskpri;
+ unsigned int apic_ldr;
+ unsigned int apic_dfr;
+ unsigned int apic_spiv;
+ unsigned int apic_lvtt;
+ unsigned int apic_lvtpc;
+ unsigned int apic_lvt0;
+ unsigned int apic_lvt1;
+ unsigned int apic_lvterr;
+ unsigned int apic_tmict;
+ unsigned int apic_tdcr;
+ unsigned int apic_thmr;
+} apic_pm_state;
+
+static int lapic_suspend(struct sys_device *dev, u32 state)
+{
+ unsigned long flags;
+
+ if (!apic_pm_state.active)
+ return 0;
+
+ apic_pm_state.apic_id = apic_read(APIC_ID);
+ apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
+ apic_pm_state.apic_ldr = apic_read(APIC_LDR);
+ apic_pm_state.apic_dfr = apic_read(APIC_DFR);
+ apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
+ apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
+ apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+ apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
+ apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
+ apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
+ apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
+ apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
+ apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+
+ local_irq_save(flags);
+ disable_local_APIC();
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int lapic_resume(struct sys_device *dev)
+{
+ unsigned int l, h;
+ unsigned long flags;
+
+ if (!apic_pm_state.active)
+ return 0;
+
+ local_irq_save(flags);
+
+ /*
+ * Make sure the APICBASE points to the right address
+ *
+ * FIXME! This will be wrong if we ever support suspend on
+ * SMP! We'll need to do this as part of the CPU restore!
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+
+ apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
+ apic_write(APIC_ID, apic_pm_state.apic_id);
+ apic_write(APIC_DFR, apic_pm_state.apic_dfr);
+ apic_write(APIC_LDR, apic_pm_state.apic_ldr);
+ apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
+ apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
+ apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
+ apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+ apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+ apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+ apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
+ apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
+ apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
+static struct sysdev_class lapic_sysclass = {
+ set_kset_name("lapic"),
+ .resume = lapic_resume,
+ .suspend = lapic_suspend,
+};
+
+static struct sys_device device_lapic = {
+ .id = 0,
+ .cls = &lapic_sysclass,
+};
+
+static void __init apic_pm_activate(void)
+{
+ apic_pm_state.active = 1;
+}
+
+static int __init init_lapic_sysfs(void)
+{
+ int error;
+
+ if (!cpu_has_apic)
+ return 0;
+ /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
+
+ error = sysdev_class_register(&lapic_sysclass);
+ if (!error)
+ error = sysdev_register(&device_lapic);
+ return error;
+}
+device_initcall(init_lapic_sysfs);
+
+#else /* CONFIG_PM */
+
+static void apic_pm_activate(void) { }
+
+#endif /* CONFIG_PM */
+
+/*
+ * Detect and enable local APICs on non-SMP boards.
+ * Original code written by Keir Fraser.
+ */
+
+/*
+ * Knob to control our willingness to enable the local APIC.
+ */
+int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
+static int __init lapic_disable(char *str)
+{
+ enable_local_apic = -1;
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ return 0;
+}
+__setup("nolapic", lapic_disable);
+
+static int __init lapic_enable(char *str)
+{
+ enable_local_apic = 1;
+ return 0;
+}
+__setup("lapic", lapic_enable);
+
+static int __init apic_set_verbosity(char *str)
+{
+ if (strcmp("debug", str) == 0)
+ apic_verbosity = APIC_DEBUG;
+ else if (strcmp("verbose", str) == 0)
+ apic_verbosity = APIC_VERBOSE;
+ else
+ printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+ " use apic=verbose or apic=debug", str);
+
+ return 0;
+}
+
+__setup("apic=", apic_set_verbosity);
+
+static int __init detect_init_APIC (void)
+{
+ u32 h, l, features;
+ extern void get_cpu_vendor(struct cpuinfo_x86*);
+
+ /* Disabled by kernel option? */
+ if (enable_local_apic < 0)
+ return -1;
+
+ /* Workaround for us being called before identify_cpu(). */
+ get_cpu_vendor(&boot_cpu_data);
+
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
+ (boot_cpu_data.x86 == 15))
+ break;
+ goto no_apic;
+ case X86_VENDOR_INTEL:
+ if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
+ (boot_cpu_data.x86 == 5 && cpu_has_apic))
+ break;
+ goto no_apic;
+ default:
+ goto no_apic;
+ }
+
+ if (!cpu_has_apic) {
+ /*
+ * Over-ride BIOS and try to enable the local
+ * APIC only if "lapic" specified.
+ */
+ if (enable_local_apic <= 0) {
+ printk("Local APIC disabled by BIOS -- "
+ "you can enable it with \"lapic\"\n");
+ return -1;
+ }
+ /*
+ * Some BIOSes disable the local APIC in the
+ * APIC_BASE MSR. This can only be done in
+ * software for Intel P6 or later and AMD K7
+ * (Model > 1) or later.
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+ printk("Local APIC disabled by BIOS -- reenabling.\n");
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ enabled_via_apicbase = 1;
+ }
+ }
+ /*
+ * The APIC feature bit should now be enabled
+ * in `cpuid'
+ */
+ features = cpuid_edx(1);
+ if (!(features & (1 << X86_FEATURE_APIC))) {
+ printk("Could not enable APIC!\n");
+ return -1;
+ }
+ set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /* The BIOS may have set up the APIC at some other address */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (l & MSR_IA32_APICBASE_ENABLE)
+ mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+ if (nmi_watchdog != NMI_NONE)
+ nmi_watchdog = NMI_LOCAL_APIC;
+
+ printk("Found and enabled local APIC!\n");
+
+ apic_pm_activate();
+
+ return 0;
+
+no_apic:
+ printk("No local APIC present or hardware disabled\n");
+ return -1;
+}
+
+void __init init_apic_mappings(void)
+{
+ unsigned long apic_phys;
+
+ /*
+ * If no local APIC can be found then set up a fake all
+ * zeroes page to simulate the local APIC and another
+ * one for the IO-APIC.
+ */
+ if (!smp_found_config && detect_init_APIC()) {
+ apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+ apic_phys = __pa(apic_phys);
+ } else
+ apic_phys = mp_lapic_addr;
+
+ set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+ printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
+ apic_phys);
+
+ /*
+ * Fetch the APIC ID of the BSP in case we have a
+ * default configuration (or the MP table is broken).
+ */
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+
+#ifdef CONFIG_X86_IO_APIC
+ {
+ unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+ int i;
+
+ for (i = 0; i < nr_ioapics; i++) {
+ if (smp_found_config) {
+ ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+ if (!ioapic_phys) {
+ printk(KERN_ERR
+ "WARNING: bogus zero IO-APIC "
+ "address found in MPTABLE, "
+ "disabling IO/APIC support!\n");
+ smp_found_config = 0;
+ skip_ioapic_setup = 1;
+ goto fake_ioapic_page;
+ }
+ } else {
+fake_ioapic_page:
+ ioapic_phys = (unsigned long)
+ alloc_bootmem_pages(PAGE_SIZE);
+ ioapic_phys = __pa(ioapic_phys);
+ }
+ set_fixmap_nocache(idx, ioapic_phys);
+ printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
+ __fix_to_virt(idx), ioapic_phys);
+ idx++;
+ }
+ }
+#endif
+}
+
+/*
+ * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts
+ * per second. We assume that the caller has already set up the local
+ * APIC.
+ *
+ * The APIC timer is not exactly sync with the external timer chip, it
+ * closely follows bus clocks.
+ */
+
+/*
+ * The timer chip is already set up at HZ interrupts per second here,
+ * but we do not accept timer interrupts yet. We only allow the BP
+ * to calibrate.
+ */
+static unsigned int __init get_8254_timer_count(void)
+{
+ extern spinlock_t i8253_lock;
+ unsigned long flags;
+
+ unsigned int count;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+
+ outb_p(0x00, PIT_MODE);
+ count = inb_p(PIT_CH0);
+ count |= inb_p(PIT_CH0) << 8;
+
+ spin_unlock_irqrestore(&i8253_lock, flags);
+
+ return count;
+}
+
+/* next tick in 8254 can be caught by catching timer wraparound */
+static void __init wait_8254_wraparound(void)
+{
+ unsigned int curr_count, prev_count;
+
+ curr_count = get_8254_timer_count();
+ do {
+ prev_count = curr_count;
+ curr_count = get_8254_timer_count();
+
+ /* workaround for broken Mercury/Neptune */
+ if (prev_count >= curr_count + 0x100)
+ curr_count = get_8254_timer_count();
+
+ } while (prev_count >= curr_count);
+}
+
+/*
+ * Default initialization for 8254 timers. If we use other timers like HPET,
+ * we override this later
+ */
+void (*wait_timer_tick)(void) __initdata = wait_8254_wraparound;
+
+/*
+ * This function sets up the local APIC timer, with a timeout of
+ * 'clocks' APIC bus clock. During calibration we actually call
+ * this function twice on the boot CPU, once with a bogus timeout
+ * value, second time for real. The other (noncalibrating) CPUs
+ * call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
+ */
+
+#define APIC_DIVISOR 16
+
+static void __setup_APIC_LVTT(unsigned int clocks)
+{
+ unsigned int lvtt_value, tmp_value, ver;
+
+ ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
+ if (!APIC_INTEGRATED(ver))
+ lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+ apic_write_around(APIC_LVTT, lvtt_value);
+
+ /*
+ * Divide PICLK by 16
+ */
+ tmp_value = apic_read(APIC_TDCR);
+ apic_write_around(APIC_TDCR, (tmp_value
+ & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
+ | APIC_TDR_DIV_16);
+
+ apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+}
+
+static void __init setup_APIC_timer(unsigned int clocks)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /*
+ * Wait for IRQ0's slice:
+ */
+ wait_timer_tick();
+
+ __setup_APIC_LVTT(clocks);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * In this function we calibrate APIC bus clocks to the external
+ * timer. Unfortunately we cannot use jiffies and the timer irq
+ * to calibrate, since some later bootup code depends on getting
+ * the first irq? Ugh.
+ *
+ * We want to do the calibration only once since we
+ * want to have local timer irqs syncron. CPUs connected
+ * by the same APIC bus have the very same bus frequency.
+ * And we want to have irqs off anyways, no accidental
+ * APIC irq that way.
+ */
+
+static int __init calibrate_APIC_clock(void)
+{
+ unsigned long long t1 = 0, t2 = 0;
+ long tt1, tt2;
+ long result;
+ int i;
+ const int LOOPS = HZ/10;
+
+ apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
+
+ /*
+ * Put whatever arbitrary (but long enough) timeout
+ * value into the APIC clock, we just want to get the
+ * counter running for calibration.
+ */
+ __setup_APIC_LVTT(1000000000);
+
+ /*
+ * The timer chip counts down to zero. Let's wait
+ * for a wraparound to start exact measurement:
+ * (the current tick might have been already half done)
+ */
+
+ wait_timer_tick();
+
+ /*
+ * We wrapped around just now. Let's start:
+ */
+ if (cpu_has_tsc)
+ rdtscll(t1);
+ tt1 = apic_read(APIC_TMCCT);
+
+ /*
+ * Let's wait LOOPS wraprounds:
+ */
+ for (i = 0; i < LOOPS; i++)
+ wait_timer_tick();
+
+ tt2 = apic_read(APIC_TMCCT);
+ if (cpu_has_tsc)
+ rdtscll(t2);
+
+ /*
+ * The APIC bus clock counter is 32 bits only, it
+ * might have overflown, but note that we use signed
+ * longs, thus no extra care needed.
+ *
+ * underflown to be exact, as the timer counts down ;)
+ */
+
+ result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
+
+ if (cpu_has_tsc)
+ apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
+ "%ld.%04ld MHz.\n",
+ ((long)(t2-t1)/LOOPS)/(1000000/HZ),
+ ((long)(t2-t1)/LOOPS)%(1000000/HZ));
+
+ apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
+ "%ld.%04ld MHz.\n",
+ result/(1000000/HZ),
+ result%(1000000/HZ));
+
+ return result;
+}
+
+static unsigned int calibration_result;
+
+void __init setup_boot_APIC_clock(void)
+{
+ apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
+ using_apic_timer = 1;
+
+ local_irq_disable();
+
+ calibration_result = calibrate_APIC_clock();
+ /*
+ * Now set up the timer for real.
+ */
+ setup_APIC_timer(calibration_result);
+
+ local_irq_enable();
+}
+
+void __init setup_secondary_APIC_clock(void)
+{
+ setup_APIC_timer(calibration_result);
+}
+
+void __init disable_APIC_timer(void)
+{
+ if (using_apic_timer) {
+ unsigned long v;
+
+ v = apic_read(APIC_LVTT);
+ apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+ }
+}
+
+void enable_APIC_timer(void)
+{
+ if (using_apic_timer) {
+ unsigned long v;
+
+ v = apic_read(APIC_LVTT);
+ apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
+ }
+}
+
+/*
+ * the frequency of the profiling timer can be changed
+ * by writing a multiplier value into /proc/profile.
+ */
+int setup_profiling_timer(unsigned int multiplier)
+{
+ int i;
+
+ /*
+ * Sanity check. [at least 500 APIC cycles should be
+ * between APIC interrupts as a rule of thumb, to avoid
+ * irqs flooding us]
+ */
+ if ( (!multiplier) || (calibration_result/multiplier < 500))
+ return -EINVAL;
+
+ /*
+ * Set the new multiplier for each CPU. CPUs don't start using the
+ * new values until the next timer interrupt in which they do process
+ * accounting. At that time they also adjust their APIC timers
+ * accordingly.
+ */
+ for (i = 0; i < NR_CPUS; ++i)
+ per_cpu(prof_multiplier, i) = multiplier;
+
+ return 0;
+}
+
+#undef APIC_DIVISOR
+
+/*
+ * Local timer interrupt handler. It does both profiling and
+ * process statistics/rescheduling.
+ *
+ * We do profiling in every local tick, statistics/rescheduling
+ * happen only every 'profiling multiplier' ticks. The default
+ * multiplier is 1 and it can be changed by writing the new multiplier
+ * value into /proc/profile.
+ */
+
+inline void smp_local_timer_interrupt(struct pt_regs * regs)
+{
+ int cpu = smp_processor_id();
+
+ profile_tick(CPU_PROFILING, regs);
+ if (--per_cpu(prof_counter, cpu) <= 0) {
+ /*
+ * The multiplier may have changed since the last time we got
+ * to this point as a result of the user writing to
+ * /proc/profile. In this case we need to adjust the APIC
+ * timer accordingly.
+ *
+ * Interrupts are already masked off at this point.
+ */
+ per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu);
+ if (per_cpu(prof_counter, cpu) !=
+ per_cpu(prof_old_multiplier, cpu)) {
+ __setup_APIC_LVTT(
+ calibration_result/
+ per_cpu(prof_counter, cpu));
+ per_cpu(prof_old_multiplier, cpu) =
+ per_cpu(prof_counter, cpu);
+ }
+
+#ifdef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ }
+
+ /*
+ * We take the 'long' return path, and there every subsystem
+ * grabs the apropriate locks (kernel lock/ irq lock).
+ *
+ * we might want to decouple profiling from the 'long path',
+ * and do the profiling totally in assembly.
+ *
+ * Currently this isn't too much of an issue (performance wise),
+ * we can take more than 100K local irqs per second on a 100 MHz P5.
+ */
+}
+
+/*
+ * Local APIC timer interrupt. This is the most natural way for doing
+ * local interrupts, but local timer interrupts can be emulated by
+ * broadcast interrupts too. [in case the hw doesn't support APIC timers]
+ *
+ * [ if a single-CPU system runs an SMP kernel then we call the local
+ * interrupt as well. Thus we cannot inline the local irq ... ]
+ */
+
+fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * the NMI deadlock-detector uses this.
+ */
+ per_cpu(irq_stat, cpu).apic_timer_irqs++;
+
+ /*
+ * NOTE! We'd better ACK the irq immediately,
+ * because timer handling can be slow.
+ */
+ ack_APIC_irq();
+ /*
+ * update_process_times() expects us to have done irq_enter().
+ * Besides, if we don't timer interrupts ignore the global
+ * interrupt lock, which is the WrongThing (tm) to do.
+ */
+ irq_enter();
+ smp_local_timer_interrupt(regs);
+ irq_exit();
+}
+
+/*
+ * This interrupt should _never_ happen with our APIC/SMP architecture
+ */
+fastcall void smp_spurious_interrupt(struct pt_regs *regs)
+{
+ unsigned long v;
+
+ irq_enter();
+ /*
+ * Check if this really is a spurious interrupt and ACK it
+ * if it is a vectored one. Just in case...
+ * Spurious interrupts should not be ACKed.
+ */
+ v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
+ if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
+ ack_APIC_irq();
+
+ /* see sw-dev-man vol 3, chapter 7.4.13.5 */
+ printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n",
+ smp_processor_id());
+ irq_exit();
+}
+
+/*
+ * This interrupt should never happen with our APIC/SMP architecture
+ */
+
+fastcall void smp_error_interrupt(struct pt_regs *regs)
+{
+ unsigned long v, v1;
+
+ irq_enter();
+ /* First tickle the hardware, only then report what went on. -- REW */
+ v = apic_read(APIC_ESR);
+ apic_write(APIC_ESR, 0);
+ v1 = apic_read(APIC_ESR);
+ ack_APIC_irq();
+ atomic_inc(&irq_err_count);
+
+ /* Here is what the APIC error bits mean:
+ 0: Send CS error
+ 1: Receive CS error
+ 2: Send accept error
+ 3: Receive accept error
+ 4: Reserved
+ 5: Send illegal vector
+ 6: Received illegal vector
+ 7: Illegal register address
+ */
+ printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
+ smp_processor_id(), v , v1);
+ irq_exit();
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int __init APIC_init_uniprocessor (void)
+{
+ if (enable_local_apic < 0)
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+
+ if (!smp_found_config && !cpu_has_apic)
+ return -1;
+
+ /*
+ * Complain if the BIOS pretends there is one.
+ */
+ if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ return -1;
+ }
+
+ verify_local_APIC();
+
+ connect_bsp_APIC();
+
+ phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+
+ setup_local_APIC();
+
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ check_nmi_watchdog();
+#ifdef CONFIG_X86_IO_APIC
+ if (smp_found_config)
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+#endif
+ setup_boot_APIC_clock();
+
+ return 0;
+}
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
new file mode 100644
index 0000000..45641a8
--- /dev/null
+++ b/arch/i386/kernel/apm.c
@@ -0,0 +1,2428 @@
+/* -*- linux-c -*-
+ * APM BIOS driver for Linux
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * Initial development of this driver was funded by NEC Australia P/L
+ * and NEC Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * October 1995, Rik Faith (faith@cs.unc.edu):
+ * Minor enhancements and updates (to the patch set) for 1.3.x
+ * Documentation
+ * January 1996, Rik Faith (faith@cs.unc.edu):
+ * Make /proc/apm easy to format (bump driver version)
+ * March 1996, Rik Faith (faith@cs.unc.edu):
+ * Prohibit APM BIOS calls unless apm_enabled.
+ * (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>)
+ * April 1996, Stephen Rothwell (sfr@canb.auug.org.au)
+ * Version 1.0 and 1.1
+ * May 1996, Version 1.2
+ * Feb 1998, Version 1.3
+ * Feb 1998, Version 1.4
+ * Aug 1998, Version 1.5
+ * Sep 1998, Version 1.6
+ * Nov 1998, Version 1.7
+ * Jan 1999, Version 1.8
+ * Jan 1999, Version 1.9
+ * Oct 1999, Version 1.10
+ * Nov 1999, Version 1.11
+ * Jan 2000, Version 1.12
+ * Feb 2000, Version 1.13
+ * Nov 2000, Version 1.14
+ * Oct 2001, Version 1.15
+ * Jan 2002, Version 1.16
+ * Oct 2002, Version 1.16ac
+ *
+ * History:
+ * 0.6b: first version in official kernel, Linux 1.3.46
+ * 0.7: changed /proc/apm format, Linux 1.3.58
+ * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59
+ * 0.9: only call bios if bios is present, Linux 1.3.72
+ * 1.0: use fixed device number, consolidate /proc/apm into this file,
+ * Linux 1.3.85
+ * 1.1: support user-space standby and suspend, power off after system
+ * halted, Linux 1.3.98
+ * 1.2: When resetting RTC after resume, take care so that the time
+ * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth
+ * <jtoth@princeton.edu>); improve interaction between
+ * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4
+ * 1.2a:Simple change to stop mysterious bug reports with SMP also added
+ * levels to the printk calls. APM is not defined for SMP machines.
+ * The new replacment for it is, but Linux doesn't yet support this.
+ * Alan Cox Linux 2.1.55
+ * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's
+ * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by
+ * Dean Gaudet <dgaudet@arctic.org>.
+ * C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87
+ * 1.5: Fix segment register reloading (in case of bad segments saved
+ * across BIOS call).
+ * Stephen Rothwell
+ * 1.6: Cope with complier/assembler differences.
+ * Only try to turn off the first display device.
+ * Fix OOPS at power off with no APM BIOS by Jan Echternach
+ * <echter@informatik.uni-rostock.de>
+ * Stephen Rothwell
+ * 1.7: Modify driver's cached copy of the disabled/disengaged flags
+ * to reflect current state of APM BIOS.
+ * Chris Rankin <rankinc@bellsouth.net>
+ * Reset interrupt 0 timer to 100Hz after suspend
+ * Chad Miller <cmiller@surfsouth.com>
+ * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE
+ * Richard Gooch <rgooch@atnf.csiro.au>
+ * Allow boot time disabling of APM
+ * Make boot messages far less verbose by default
+ * Make asm safer
+ * Stephen Rothwell
+ * 1.8: Add CONFIG_APM_RTC_IS_GMT
+ * Richard Gooch <rgooch@atnf.csiro.au>
+ * change APM_NOINTS to CONFIG_APM_ALLOW_INTS
+ * remove dependency on CONFIG_PROC_FS
+ * Stephen Rothwell
+ * 1.9: Fix small typo. <laslo@wodip.opole.pl>
+ * Try to cope with BIOS's that need to have all display
+ * devices blanked and not just the first one.
+ * Ross Paterson <ross@soi.city.ac.uk>
+ * Fix segment limit setting it has always been wrong as
+ * the segments needed to have byte granularity.
+ * Mark a few things __init.
+ * Add hack to allow power off of SMP systems by popular request.
+ * Use CONFIG_SMP instead of __SMP__
+ * Ignore BOUNCES for three seconds.
+ * Stephen Rothwell
+ * 1.10: Fix for Thinkpad return code.
+ * Merge 2.2 and 2.3 drivers.
+ * Remove APM dependencies in arch/i386/kernel/process.c
+ * Remove APM dependencies in drivers/char/sysrq.c
+ * Reset time across standby.
+ * Allow more inititialisation on SMP.
+ * Remove CONFIG_APM_POWER_OFF and make it boot time
+ * configurable (default on).
+ * Make debug only a boot time parameter (remove APM_DEBUG).
+ * Try to blank all devices on any error.
+ * 1.11: Remove APM dependencies in drivers/char/console.c
+ * Check nr_running to detect if we are idle (from
+ * Borislav Deianov <borislav@lix.polytechnique.fr>)
+ * Fix for bioses that don't zero the top part of the
+ * entrypoint offset (Mario Sitta <sitta@al.unipmn.it>)
+ * (reported by Panos Katsaloulis <teras@writeme.com>).
+ * Real mode power off patch (Walter Hofmann
+ * <Walter.Hofmann@physik.stud.uni-erlangen.de>).
+ * 1.12: Remove CONFIG_SMP as the compiler will optimize
+ * the code away anyway (smp_num_cpus == 1 in UP)
+ * noted by Artur Skawina <skawina@geocities.com>.
+ * Make power off under SMP work again.
+ * Fix thinko with initial engaging of BIOS.
+ * Make sure power off only happens on CPU 0
+ * (Paul "Rusty" Russell <rusty@rustcorp.com.au>).
+ * Do error notification to user mode if BIOS calls fail.
+ * Move entrypoint offset fix to ...boot/setup.S
+ * where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>).
+ * Remove smp-power-off. SMP users must now specify
+ * "apm=power-off" on the kernel command line. Suggested
+ * by Jim Avera <jima@hal.com>, modified by Alan Cox
+ * <alan@lxorguk.ukuu.org.uk>.
+ * Register the /proc/apm entry even on SMP so that
+ * scripts that check for it before doing power off
+ * work (Jim Avera <jima@hal.com>).
+ * 1.13: Changes for new pm_ interfaces (Andy Henroid
+ * <andy_henroid@yahoo.com>).
+ * Modularize the code.
+ * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS
+ * is now the way life works).
+ * Fix thinko in suspend() (wrong return).
+ * Notify drivers on critical suspend.
+ * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz>
+ * modified by sfr).
+ * Disable interrupts while we are suspended (Andy Henroid
+ * <andy_henroid@yahoo.com> fixed by sfr).
+ * Make power off work on SMP again (Tony Hoyle
+ * <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr.
+ * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore
+ * interval is now configurable.
+ * 1.14: Make connection version persist across module unload/load.
+ * Enable and engage power management earlier.
+ * Disengage power management on module unload.
+ * Changed to use the sysrq-register hack for registering the
+ * power off function called by magic sysrq based upon discussions
+ * in irc://irc.openprojects.net/#kernelnewbies
+ * (Crutcher Dunnavant <crutcher+kernel@datastacks.com>).
+ * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable.
+ * (Arjan van de Ven <arjanv@redhat.com>) modified by sfr.
+ * Work around byte swap bug in one of the Vaio's BIOS's
+ * (Marc Boucher <marc@mbsi.ca>).
+ * Exposed the disable flag to dmi so that we can handle known
+ * broken APM (Alan Cox <alan@redhat.com>).
+ * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin
+ * calling it - instead idle. (Alan Cox <alan@redhat.com>)
+ * If an APM idle fails log it and idle sensibly
+ * 1.15: Don't queue events to clients who open the device O_WRONLY.
+ * Don't expect replies from clients who open the device O_RDONLY.
+ * (Idea from Thomas Hood)
+ * Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>)
+ * 1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.)
+ * Notify listeners of standby or suspend events before notifying
+ * drivers. Return EBUSY to ioctl() if suspend is rejected.
+ * (Russell King <rmk@arm.linux.org.uk> and Thomas Hood)
+ * Ignore first resume after we generate our own resume event
+ * after a suspend (Thomas Hood)
+ * Daemonize now gets rid of our controlling terminal (sfr).
+ * CONFIG_APM_CPU_IDLE now just affects the default value of
+ * idle_threshold (sfr).
+ * Change name of kernel apm daemon (as it no longer idles) (sfr).
+ * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we
+ * make _all_ APM calls on the CPU#0. Fix unsafe sign bug.
+ * TODO: determine if its "boot CPU" or "CPU0" we want to lock to.
+ *
+ * APM 1.1 Reference:
+ *
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.1, September 1993.
+ * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01.
+ *
+ * [This document is available free from Intel by calling 800.628.8686 (fax
+ * 916.356.6100) or 800.548.4725; or via anonymous ftp from
+ * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also
+ * available from Microsoft by calling 206.882.8080.]
+ *
+ * APM 1.2 Reference:
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/fcntl.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/dmi.h>
+#include <linux/suspend.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "io_ports.h"
+
+extern spinlock_t i8253_lock;
+extern unsigned long get_cmos_time(void);
+extern void machine_real_restart(unsigned char *, int);
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+extern int (*console_blank_hook)(int);
+#endif
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV 134
+
+/*
+ * See Documentation/Config.help for the configuration options.
+ *
+ * Various options can be changed at boot time as follows:
+ * (We allow underscores for compatibility with the modules code)
+ * apm=on/off enable/disable APM
+ * [no-]allow[-_]ints allow interrupts during BIOS calls
+ * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call
+ * [no-]realmode[-_]power[-_]off switch to real mode before
+ * powering off
+ * [no-]debug log some debugging messages
+ * [no-]power[-_]off power off on shutdown
+ * [no-]smp Use apm even on an SMP box
+ * bounce[-_]interval=<n> number of ticks to ignore suspend
+ * bounces
+ * idle[-_]threshold=<n> System idle percentage above which to
+ * make APM BIOS idle calls. Set it to
+ * 100 to disable.
+ * idle[-_]period=<n> Period (in 1/100s of a second) over
+ * which the idle percentage is
+ * calculated.
+ */
+
+/* KNOWN PROBLEM MACHINES:
+ *
+ * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant
+ * [Confirmed by TI representative]
+ * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification
+ * [Confirmed by BIOS disassembly]
+ * [This may work now ...]
+ * P: Toshiba 1950S: battery life information only gets updated after resume
+ * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking
+ * broken in BIOS [Reported by Garst R. Reese <reese@isn.net>]
+ * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP
+ * Neale Banks <neale@lowendale.com.au> December 2000
+ *
+ * Legend: U = unusable with APM patches
+ * P = partially usable with APM patches
+ */
+
+/*
+ * Define as 1 to make the driver always call the APM BIOS busy
+ * routine even if the clock was not reported as slowed by the
+ * idle routine. Otherwise, define as 0.
+ */
+#define ALWAYS_CALL_BUSY 1
+
+/*
+ * Define to make the APM BIOS calls zero all data segment registers (so
+ * that an incorrect BIOS implementation will cause a kernel panic if it
+ * tries to write to arbitrary memory).
+ */
+#define APM_ZERO_SEGS
+
+#include "apm.h"
+
+/*
+ * Define to make all _set_limit calls use 64k limits. The APM 1.1 BIOS is
+ * supposed to provide limit information that it recognizes. Many machines
+ * do this correctly, but many others do not restrict themselves to their
+ * claimed limit. When this happens, they will cause a segmentation
+ * violation in the kernel at boot time. Most BIOS's, however, will
+ * respect a 64k limit, so we use that. If you want to be pedantic and
+ * hold your BIOS to its claims, then undefine this.
+ */
+#define APM_RELAX_SEGMENTS
+
+/*
+ * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend.
+ * This patched by Chad Miller <cmiller@surfsouth.com>, original code by
+ * David Chen <chen@ctpa04.mit.edu>
+ */
+#undef INIT_TIMER_AFTER_SUSPEND
+
+#ifdef INIT_TIMER_AFTER_SUSPEND
+#include <linux/timex.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#endif
+
+/*
+ * Need to poll the APM BIOS every second
+ */
+#define APM_CHECK_TIMEOUT (HZ)
+
+/*
+ * Ignore suspend events for this amount of time after a resume
+ */
+#define DEFAULT_BOUNCE_INTERVAL (3 * HZ)
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS 20
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+ int magic;
+ struct apm_user * next;
+ int suser: 1;
+ int writer: 1;
+ int reader: 1;
+ int suspend_wait: 1;
+ int suspend_result;
+ int suspends_pending;
+ int standbys_pending;
+ int suspends_read;
+ int standbys_read;
+ int event_head;
+ int event_tail;
+ apm_event_t events[APM_MAX_EVENTS];
+};
+
+/*
+ * The magic number in apm_user
+ */
+#define APM_BIOS_MAGIC 0x4101
+
+/*
+ * idle percentage above which bios idle calls are done
+ */
+#ifdef CONFIG_APM_CPU_IDLE
+#define DEFAULT_IDLE_THRESHOLD 95
+#else
+#define DEFAULT_IDLE_THRESHOLD 100
+#endif
+#define DEFAULT_IDLE_PERIOD (100 / 3)
+
+/*
+ * Local variables
+ */
+static struct {
+ unsigned long offset;
+ unsigned short segment;
+} apm_bios_entry;
+static int clock_slowed;
+static int idle_threshold = DEFAULT_IDLE_THRESHOLD;
+static int idle_period = DEFAULT_IDLE_PERIOD;
+static int set_pm_idle;
+static int suspends_pending;
+static int standbys_pending;
+static int ignore_sys_suspend;
+static int ignore_normal_resume;
+static int bounce_interval = DEFAULT_BOUNCE_INTERVAL;
+
+#ifdef CONFIG_APM_RTC_IS_GMT
+# define clock_cmos_diff 0
+# define got_clock_diff 1
+#else
+static long clock_cmos_diff;
+static int got_clock_diff;
+#endif
+static int debug;
+static int smp;
+static int apm_disabled = -1;
+#ifdef CONFIG_SMP
+static int power_off;
+#else
+static int power_off = 1;
+#endif
+#ifdef CONFIG_APM_REAL_MODE_POWER_OFF
+static int realmode_power_off = 1;
+#else
+static int realmode_power_off;
+#endif
+static int exit_kapmd;
+static int kapmd_running;
+#ifdef CONFIG_APM_ALLOW_INTS
+static int allow_ints = 1;
+#else
+static int allow_ints;
+#endif
+static int broken_psr;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+static struct apm_user * user_list;
+static DEFINE_SPINLOCK(user_list_lock);
+static struct desc_struct bad_bios_desc = { 0, 0x00409200 };
+
+static char driver_version[] = "1.16ac"; /* no spaces */
+
+/*
+ * APM event names taken from the APM 1.2 specification. These are
+ * the message codes that the BIOS uses to tell us about events
+ */
+static char * apm_event_name[] = {
+ "system standby",
+ "system suspend",
+ "normal resume",
+ "critical resume",
+ "low battery",
+ "power status change",
+ "update time",
+ "critical suspend",
+ "user standby",
+ "user suspend",
+ "system standby resume",
+ "capabilities change"
+};
+#define NR_APM_EVENT_NAME \
+ (sizeof(apm_event_name) / sizeof(apm_event_name[0]))
+
+typedef struct lookup_t {
+ int key;
+ char * msg;
+} lookup_t;
+
+/*
+ * The BIOS returns a set of standard error codes in AX when the
+ * carry flag is set.
+ */
+
+static const lookup_t error_table[] = {
+/* N/A { APM_SUCCESS, "Operation succeeded" }, */
+ { APM_DISABLED, "Power management disabled" },
+ { APM_CONNECTED, "Real mode interface already connected" },
+ { APM_NOT_CONNECTED, "Interface not connected" },
+ { APM_16_CONNECTED, "16 bit interface already connected" },
+/* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */
+ { APM_32_CONNECTED, "32 bit interface already connected" },
+ { APM_32_UNSUPPORTED, "32 bit interface not supported" },
+ { APM_BAD_DEVICE, "Unrecognized device ID" },
+ { APM_BAD_PARAM, "Parameter out of range" },
+ { APM_NOT_ENGAGED, "Interface not engaged" },
+ { APM_BAD_FUNCTION, "Function not supported" },
+ { APM_RESUME_DISABLED, "Resume timer disabled" },
+ { APM_BAD_STATE, "Unable to enter requested state" },
+/* N/A { APM_NO_EVENTS, "No events pending" }, */
+ { APM_NO_ERROR, "BIOS did not set a return code" },
+ { APM_NOT_PRESENT, "No APM present" }
+};
+#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t))
+
+/**
+ * apm_error - display an APM error
+ * @str: information string
+ * @err: APM BIOS return code
+ *
+ * Write a meaningful log entry to the kernel log in the event of
+ * an APM error.
+ */
+
+static void apm_error(char *str, int err)
+{
+ int i;
+
+ for (i = 0; i < ERROR_COUNT; i++)
+ if (error_table[i].key == err) break;
+ if (i < ERROR_COUNT)
+ printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
+ else
+ printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
+ str, err);
+}
+
+/*
+ * Lock APM functionality to physical CPU 0
+ */
+
+#ifdef CONFIG_SMP
+
+static cpumask_t apm_save_cpus(void)
+{
+ cpumask_t x = current->cpus_allowed;
+ /* Some bioses don't like being called from CPU != 0 */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+ return x;
+}
+
+static inline void apm_restore_cpus(cpumask_t mask)
+{
+ set_cpus_allowed(current, mask);
+}
+
+#else
+
+/*
+ * No CPU lockdown needed on a uniprocessor
+ */
+
+#define apm_save_cpus() (current->cpus_allowed)
+#define apm_restore_cpus(x) (void)(x)
+
+#endif
+
+/*
+ * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and
+ * apm_info.allow_ints, we are being really paranoid here! Not only
+ * are interrupts disabled, but all the segment registers (except SS)
+ * are saved and zeroed this means that if the BIOS tries to reference
+ * any data without explicitly loading the segment registers, the kernel
+ * will fault immediately rather than have some unforeseen circumstances
+ * for the rest of the kernel. And it will be very obvious! :-) Doing
+ * this depends on CS referring to the same physical memory as DS so that
+ * DS can be zeroed before the call. Unfortunately, we can't do anything
+ * about the stack segment/pointer. Also, we tell the compiler that
+ * everything could change.
+ *
+ * Also, we KNOW that for the non error case of apm_bios_call, there
+ * is no useful data returned in the low order 8 bits of eax.
+ */
+#define APM_DO_CLI \
+ if (apm_info.allow_ints) \
+ local_irq_enable(); \
+ else \
+ local_irq_disable();
+
+#ifdef APM_ZERO_SEGS
+# define APM_DECL_SEGS \
+ unsigned int saved_fs; unsigned int saved_gs;
+# define APM_DO_SAVE_SEGS \
+ savesegment(fs, saved_fs); savesegment(gs, saved_gs)
+# define APM_DO_RESTORE_SEGS \
+ loadsegment(fs, saved_fs); loadsegment(gs, saved_gs)
+#else
+# define APM_DECL_SEGS
+# define APM_DO_SAVE_SEGS
+# define APM_DO_RESTORE_SEGS
+#endif
+
+/**
+ * apm_bios_call - Make an APM BIOS 32bit call
+ * @func: APM function to execute
+ * @ebx_in: EBX register for call entry
+ * @ecx_in: ECX register for call entry
+ * @eax: EAX register return
+ * @ebx: EBX register return
+ * @ecx: ECX register return
+ * @edx: EDX register return
+ * @esi: ESI register return
+ *
+ * Make an APM call using the 32bit protected mode interface. The
+ * caller is responsible for knowing if APM BIOS is configured and
+ * enabled. This call can disable interrupts for a long period of
+ * time on some laptops. The return value is in AH and the carry
+ * flag is loaded into AL. If there is an error, then the error
+ * code is returned in AH (bits 8-15 of eax) and this function
+ * returns non-zero.
+ */
+
+static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi)
+{
+ APM_DECL_SEGS
+ unsigned long flags;
+ cpumask_t cpus;
+ int cpu;
+ struct desc_struct save_desc_40;
+
+ cpus = apm_save_cpus();
+
+ cpu = get_cpu();
+ save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+ local_save_flags(flags);
+ APM_DO_CLI;
+ APM_DO_SAVE_SEGS;
+ apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
+ APM_DO_RESTORE_SEGS;
+ local_irq_restore(flags);
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+ put_cpu();
+ apm_restore_cpus(cpus);
+
+ return *eax & 0xff;
+}
+
+/**
+ * apm_bios_call_simple - make a simple APM BIOS 32bit call
+ * @func: APM function to invoke
+ * @ebx_in: EBX register value for BIOS call
+ * @ecx_in: ECX register value for BIOS call
+ * @eax: EAX register on return from the BIOS call
+ *
+ * Make a BIOS call that does only returns one value, or just status.
+ * If there is an error, then the error code is returned in AH
+ * (bits 8-15 of eax) and this function returns non-zero. This is
+ * used for simpler BIOS operations. This call may hold interrupts
+ * off for a long time on some laptops.
+ */
+
+static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
+{
+ u8 error;
+ APM_DECL_SEGS
+ unsigned long flags;
+ cpumask_t cpus;
+ int cpu;
+ struct desc_struct save_desc_40;
+
+
+ cpus = apm_save_cpus();
+
+ cpu = get_cpu();
+ save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+ local_save_flags(flags);
+ APM_DO_CLI;
+ APM_DO_SAVE_SEGS;
+ error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
+ APM_DO_RESTORE_SEGS;
+ local_irq_restore(flags);
+ __get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+ put_cpu();
+ apm_restore_cpus(cpus);
+ return error;
+}
+
+/**
+ * apm_driver_version - APM driver version
+ * @val: loaded with the APM version on return
+ *
+ * Retrieve the APM version supported by the BIOS. This is only
+ * supported for APM 1.1 or higher. An error indicates APM 1.0 is
+ * probably present.
+ *
+ * On entry val should point to a value indicating the APM driver
+ * version with the high byte being the major and the low byte the
+ * minor number both in BCD
+ *
+ * On return it will hold the BIOS revision supported in the
+ * same format.
+ */
+
+static int apm_driver_version(u_short *val)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax))
+ return (eax >> 8) & 0xff;
+ *val = eax;
+ return APM_SUCCESS;
+}
+
+/**
+ * apm_get_event - get an APM event from the BIOS
+ * @event: pointer to the event
+ * @info: point to the event information
+ *
+ * The APM BIOS provides a polled information for event
+ * reporting. The BIOS expects to be polled at least every second
+ * when events are pending. When a message is found the caller should
+ * poll until no more messages are present. However, this causes
+ * problems on some laptops where a suspend event notification is
+ * not cleared until it is acknowledged.
+ *
+ * Additional information is returned in the info pointer, providing
+ * that APM 1.2 is in use. If no messges are pending the value 0x80
+ * is returned (No power management events pending).
+ */
+
+static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 dummy;
+
+ if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx,
+ &dummy, &dummy))
+ return (eax >> 8) & 0xff;
+ *event = ebx;
+ if (apm_info.connection_version < 0x0102)
+ *info = ~0; /* indicate info not valid */
+ else
+ *info = ecx;
+ return APM_SUCCESS;
+}
+
+/**
+ * set_power_state - set the power management state
+ * @what: which items to transition
+ * @state: state to transition to
+ *
+ * Request an APM change of state for one or more system devices. The
+ * processor state must be transitioned last of all. what holds the
+ * class of device in the upper byte and the device number (0xFF for
+ * all) for the object to be transitioned.
+ *
+ * The state holds the state to transition to, which may in fact
+ * be an acceptance of a BIOS requested state change.
+ */
+
+static int set_power_state(u_short what, u_short state)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax))
+ return (eax >> 8) & 0xff;
+ return APM_SUCCESS;
+}
+
+/**
+ * set_system_power_state - set system wide power state
+ * @state: which state to enter
+ *
+ * Transition the entire system into a new APM power state.
+ */
+
+static int set_system_power_state(u_short state)
+{
+ return set_power_state(APM_DEVICE_ALL, state);
+}
+
+/**
+ * apm_do_idle - perform power saving
+ *
+ * This function notifies the BIOS that the processor is (in the view
+ * of the OS) idle. It returns -1 in the event that the BIOS refuses
+ * to handle the idle request. On a success the function returns 1
+ * if the BIOS did clock slowing or 0 otherwise.
+ */
+
+static int apm_do_idle(void)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) {
+ static unsigned long t;
+
+ /* This always fails on some SMP boards running UP kernels.
+ * Only report the failure the first 5 times.
+ */
+ if (++t < 5)
+ {
+ printk(KERN_DEBUG "apm_do_idle failed (%d)\n",
+ (eax >> 8) & 0xff);
+ t = jiffies;
+ }
+ return -1;
+ }
+ clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0;
+ return clock_slowed;
+}
+
+/**
+ * apm_do_busy - inform the BIOS the CPU is busy
+ *
+ * Request that the BIOS brings the CPU back to full performance.
+ */
+
+static void apm_do_busy(void)
+{
+ u32 dummy;
+
+ if (clock_slowed || ALWAYS_CALL_BUSY) {
+ (void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy);
+ clock_slowed = 0;
+ }
+}
+
+/*
+ * If no process has really been interested in
+ * the CPU for some time, we want to call BIOS
+ * power management - we probably want
+ * to conserve power.
+ */
+#define IDLE_CALC_LIMIT (HZ * 100)
+#define IDLE_LEAKY_MAX 16
+
+static void (*original_pm_idle)(void);
+
+extern void default_idle(void);
+
+/**
+ * apm_cpu_idle - cpu idling for APM capable Linux
+ *
+ * This is the idling function the kernel executes when APM is available. It
+ * tries to do BIOS powermanagement based on the average system idle time.
+ * Furthermore it calls the system default idle routine.
+ */
+
+static void apm_cpu_idle(void)
+{
+ static int use_apm_idle; /* = 0 */
+ static unsigned int last_jiffies; /* = 0 */
+ static unsigned int last_stime; /* = 0 */
+
+ int apm_idle_done = 0;
+ unsigned int jiffies_since_last_check = jiffies - last_jiffies;
+ unsigned int bucket;
+
+recalc:
+ if (jiffies_since_last_check > IDLE_CALC_LIMIT) {
+ use_apm_idle = 0;
+ last_jiffies = jiffies;
+ last_stime = current->stime;
+ } else if (jiffies_since_last_check > idle_period) {
+ unsigned int idle_percentage;
+
+ idle_percentage = current->stime - last_stime;
+ idle_percentage *= 100;
+ idle_percentage /= jiffies_since_last_check;
+ use_apm_idle = (idle_percentage > idle_threshold);
+ if (apm_info.forbid_idle)
+ use_apm_idle = 0;
+ last_jiffies = jiffies;
+ last_stime = current->stime;
+ }
+
+ bucket = IDLE_LEAKY_MAX;
+
+ while (!need_resched()) {
+ if (use_apm_idle) {
+ unsigned int t;
+
+ t = jiffies;
+ switch (apm_do_idle()) {
+ case 0: apm_idle_done = 1;
+ if (t != jiffies) {
+ if (bucket) {
+ bucket = IDLE_LEAKY_MAX;
+ continue;
+ }
+ } else if (bucket) {
+ bucket--;
+ continue;
+ }
+ break;
+ case 1: apm_idle_done = 1;
+ break;
+ default: /* BIOS refused */
+ break;
+ }
+ }
+ if (original_pm_idle)
+ original_pm_idle();
+ else
+ default_idle();
+ jiffies_since_last_check = jiffies - last_jiffies;
+ if (jiffies_since_last_check > idle_period)
+ goto recalc;
+ }
+
+ if (apm_idle_done)
+ apm_do_busy();
+}
+
+/**
+ * apm_power_off - ask the BIOS to power off
+ *
+ * Handle the power off sequence. This is the one piece of code we
+ * will execute even on SMP machines. In order to deal with BIOS
+ * bugs we support real mode APM BIOS power off calls. We also make
+ * the SMP call on CPU0 as some systems will only honour this call
+ * on their first cpu.
+ */
+
+static void apm_power_off(void)
+{
+ unsigned char po_bios_call[] = {
+ 0xb8, 0x00, 0x10, /* movw $0x1000,ax */
+ 0x8e, 0xd0, /* movw ax,ss */
+ 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */
+ 0xb8, 0x07, 0x53, /* movw $0x5307,ax */
+ 0xbb, 0x01, 0x00, /* movw $0x0001,bx */
+ 0xb9, 0x03, 0x00, /* movw $0x0003,cx */
+ 0xcd, 0x15 /* int $0x15 */
+ };
+
+ /*
+ * This may be called on an SMP machine.
+ */
+#ifdef CONFIG_SMP
+ /* Some bioses don't like being called from CPU != 0 */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+#endif
+ if (apm_info.realmode_power_off)
+ {
+ (void)apm_save_cpus();
+ machine_real_restart(po_bios_call, sizeof(po_bios_call));
+ }
+ else
+ (void) set_system_power_state(APM_STATE_OFF);
+}
+
+#ifdef CONFIG_APM_DO_ENABLE
+
+/**
+ * apm_enable_power_management - enable BIOS APM power management
+ * @enable: enable yes/no
+ *
+ * Enable or disable the APM BIOS power services.
+ */
+
+static int apm_enable_power_management(int enable)
+{
+ u32 eax;
+
+ if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED))
+ return APM_NOT_ENGAGED;
+ if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL,
+ enable, &eax))
+ return (eax >> 8) & 0xff;
+ if (enable)
+ apm_info.bios.flags &= ~APM_BIOS_DISABLED;
+ else
+ apm_info.bios.flags |= APM_BIOS_DISABLED;
+ return APM_SUCCESS;
+}
+#endif
+
+/**
+ * apm_get_power_status - get current power state
+ * @status: returned status
+ * @bat: battery info
+ * @life: estimated life
+ *
+ * Obtain the current power status from the APM BIOS. We return a
+ * status which gives the rough battery status, and current power
+ * source. The bat value returned give an estimate as a percentage
+ * of life and a status value for the battery. The estimated life
+ * if reported is a lifetime in secodnds/minutes at current powwer
+ * consumption.
+ */
+
+static int apm_get_power_status(u_short *status, u_short *bat, u_short *life)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 dummy;
+
+ if (apm_info.get_power_status_broken)
+ return APM_32_UNSUPPORTED;
+ if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0,
+ &eax, &ebx, &ecx, &edx, &dummy))
+ return (eax >> 8) & 0xff;
+ *status = ebx;
+ *bat = ecx;
+ if (apm_info.get_power_status_swabinminutes) {
+ *life = swab16((u16)edx);
+ *life |= 0x8000;
+ } else
+ *life = edx;
+ return APM_SUCCESS;
+}
+
+#if 0
+static int apm_get_battery_status(u_short which, u_short *status,
+ u_short *bat, u_short *life, u_short *nbat)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 esi;
+
+ if (apm_info.connection_version < 0x0102) {
+ /* pretend we only have one battery. */
+ if (which != 1)
+ return APM_BAD_DEVICE;
+ *nbat = 1;
+ return apm_get_power_status(status, bat, life);
+ }
+
+ if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax,
+ &ebx, &ecx, &edx, &esi))
+ return (eax >> 8) & 0xff;
+ *status = ebx;
+ *bat = ecx;
+ *life = edx;
+ *nbat = esi;
+ return APM_SUCCESS;
+}
+#endif
+
+/**
+ * apm_engage_power_management - enable PM on a device
+ * @device: identity of device
+ * @enable: on/off
+ *
+ * Activate or deactive power management on either a specific device
+ * or the entire system (%APM_DEVICE_ALL).
+ */
+
+static int apm_engage_power_management(u_short device, int enable)
+{
+ u32 eax;
+
+ if ((enable == 0) && (device == APM_DEVICE_ALL)
+ && (apm_info.bios.flags & APM_BIOS_DISABLED))
+ return APM_DISABLED;
+ if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax))
+ return (eax >> 8) & 0xff;
+ if (device == APM_DEVICE_ALL) {
+ if (enable)
+ apm_info.bios.flags &= ~APM_BIOS_DISENGAGED;
+ else
+ apm_info.bios.flags |= APM_BIOS_DISENGAGED;
+ }
+ return APM_SUCCESS;
+}
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+
+/**
+ * apm_console_blank - blank the display
+ * @blank: on/off
+ *
+ * Attempt to blank the console, firstly by blanking just video device
+ * zero, and if that fails (some BIOSes don't support it) then it blanks
+ * all video devices. Typically the BIOS will do laptop backlight and
+ * monitor powerdown for us.
+ */
+
+static int apm_console_blank(int blank)
+{
+ int error;
+ u_short state;
+
+ state = blank ? APM_STATE_STANDBY : APM_STATE_READY;
+ /* Blank the first display device */
+ error = set_power_state(0x100, state);
+ if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) {
+ /* try to blank them all instead */
+ error = set_power_state(0x1ff, state);
+ if ((error != APM_SUCCESS) && (error != APM_NO_ERROR))
+ /* try to blank device one instead */
+ error = set_power_state(0x101, state);
+ }
+ if ((error == APM_SUCCESS) || (error == APM_NO_ERROR))
+ return 1;
+ if (error == APM_NOT_ENGAGED) {
+ static int tried;
+ int eng_error;
+ if (tried++ == 0) {
+ eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+ if (eng_error) {
+ apm_error("set display", error);
+ apm_error("engage interface", eng_error);
+ return 0;
+ } else
+ return apm_console_blank(blank);
+ }
+ }
+ apm_error("set display", error);
+ return 0;
+}
+#endif
+
+static int queue_empty(struct apm_user *as)
+{
+ return as->event_head == as->event_tail;
+}
+
+static apm_event_t get_queued_event(struct apm_user *as)
+{
+ as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+ return as->events[as->event_tail];
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+ struct apm_user * as;
+
+ spin_lock(&user_list_lock);
+ if (user_list == NULL)
+ goto out;
+ for (as = user_list; as != NULL; as = as->next) {
+ if ((as == sender) || (!as->reader))
+ continue;
+ as->event_head = (as->event_head + 1) % APM_MAX_EVENTS;
+ if (as->event_head == as->event_tail) {
+ static int notified;
+
+ if (notified++ == 0)
+ printk(KERN_ERR "apm: an event queue overflowed\n");
+ as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+ }
+ as->events[as->event_head] = event;
+ if ((!as->suser) || (!as->writer))
+ continue;
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ as->suspends_pending++;
+ suspends_pending++;
+ break;
+
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ as->standbys_pending++;
+ standbys_pending++;
+ break;
+ }
+ }
+ wake_up_interruptible(&apm_waitqueue);
+out:
+ spin_unlock(&user_list_lock);
+}
+
+static void set_time(void)
+{
+ if (got_clock_diff) { /* Must know time zone in order to set clock */
+ xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
+ xtime.tv_nsec = 0;
+ }
+}
+
+static void get_time_diff(void)
+{
+#ifndef CONFIG_APM_RTC_IS_GMT
+ /*
+ * Estimate time zone so that set_time can update the clock
+ */
+ clock_cmos_diff = -get_cmos_time();
+ clock_cmos_diff += get_seconds();
+ got_clock_diff = 1;
+#endif
+}
+
+static void reinit_timer(void)
+{
+#ifdef INIT_TIMER_AFTER_SUSPEND
+ unsigned long flags;
+ extern spinlock_t i8253_lock;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ /* set the clock to 100 Hz */
+ outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
+ udelay(10);
+ outb_p(LATCH & 0xff, PIT_CH0); /* LSB */
+ udelay(10);
+ outb(LATCH >> 8, PIT_CH0); /* MSB */
+ udelay(10);
+ spin_unlock_irqrestore(&i8253_lock, flags);
+#endif
+}
+
+static int suspend(int vetoable)
+{
+ int err;
+ struct apm_user *as;
+
+ if (pm_send_all(PM_SUSPEND, (void *)3)) {
+ /* Vetoed */
+ if (vetoable) {
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ err = -EBUSY;
+ ignore_sys_suspend = 0;
+ printk(KERN_WARNING "apm: suspend was vetoed.\n");
+ goto out;
+ }
+ printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
+ }
+
+ device_suspend(PMSG_SUSPEND);
+ local_irq_disable();
+ device_power_down(PMSG_SUSPEND);
+
+ /* serialize with the timer interrupt */
+ write_seqlock(&xtime_lock);
+
+ /* protect against access to timer chip registers */
+ spin_lock(&i8253_lock);
+
+ get_time_diff();
+ /*
+ * Irq spinlock must be dropped around set_system_power_state.
+ * We'll undo any timer changes due to interrupts below.
+ */
+ spin_unlock(&i8253_lock);
+ write_sequnlock(&xtime_lock);
+ local_irq_enable();
+
+ save_processor_state();
+ err = set_system_power_state(APM_STATE_SUSPEND);
+ restore_processor_state();
+
+ local_irq_disable();
+ write_seqlock(&xtime_lock);
+ spin_lock(&i8253_lock);
+ reinit_timer();
+ set_time();
+ ignore_normal_resume = 1;
+
+ spin_unlock(&i8253_lock);
+ write_sequnlock(&xtime_lock);
+
+ if (err == APM_NO_ERROR)
+ err = APM_SUCCESS;
+ if (err != APM_SUCCESS)
+ apm_error("suspend", err);
+ err = (err == APM_SUCCESS) ? 0 : -EIO;
+ device_power_up();
+ local_irq_enable();
+ device_resume();
+ pm_send_all(PM_RESUME, (void *)0);
+ queue_event(APM_NORMAL_RESUME, NULL);
+ out:
+ spin_lock(&user_list_lock);
+ for (as = user_list; as != NULL; as = as->next) {
+ as->suspend_wait = 0;
+ as->suspend_result = err;
+ }
+ spin_unlock(&user_list_lock);
+ wake_up_interruptible(&apm_suspend_waitqueue);
+ return err;
+}
+
+static void standby(void)
+{
+ int err;
+
+ local_irq_disable();
+ device_power_down(PMSG_SUSPEND);
+ /* serialize with the timer interrupt */
+ write_seqlock(&xtime_lock);
+ /* If needed, notify drivers here */
+ get_time_diff();
+ write_sequnlock(&xtime_lock);
+ local_irq_enable();
+
+ err = set_system_power_state(APM_STATE_STANDBY);
+ if ((err != APM_SUCCESS) && (err != APM_NO_ERROR))
+ apm_error("standby", err);
+
+ local_irq_disable();
+ device_power_up();
+ local_irq_enable();
+}
+
+static apm_event_t get_event(void)
+{
+ int error;
+ apm_event_t event;
+ apm_eventinfo_t info;
+
+ static int notified;
+
+ /* we don't use the eventinfo */
+ error = apm_get_event(&event, &info);
+ if (error == APM_SUCCESS)
+ return event;
+
+ if ((error != APM_NO_EVENTS) && (notified++ == 0))
+ apm_error("get_event", error);
+
+ return 0;
+}
+
+static void check_events(void)
+{
+ apm_event_t event;
+ static unsigned long last_resume;
+ static int ignore_bounce;
+
+ while ((event = get_event()) != 0) {
+ if (debug) {
+ if (event <= NR_APM_EVENT_NAME)
+ printk(KERN_DEBUG "apm: received %s notify\n",
+ apm_event_name[event - 1]);
+ else
+ printk(KERN_DEBUG "apm: received unknown "
+ "event 0x%02x\n", event);
+ }
+ if (ignore_bounce
+ && ((jiffies - last_resume) > bounce_interval))
+ ignore_bounce = 0;
+
+ switch (event) {
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ queue_event(event, NULL);
+ if (standbys_pending <= 0)
+ standby();
+ break;
+
+ case APM_USER_SUSPEND:
+#ifdef CONFIG_APM_IGNORE_USER_SUSPEND
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ break;
+#endif
+ case APM_SYS_SUSPEND:
+ if (ignore_bounce) {
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ break;
+ }
+ /*
+ * If we are already processing a SUSPEND,
+ * then further SUSPEND events from the BIOS
+ * will be ignored. We also return here to
+ * cope with the fact that the Thinkpads keep
+ * sending a SUSPEND event until something else
+ * happens!
+ */
+ if (ignore_sys_suspend)
+ return;
+ ignore_sys_suspend = 1;
+ queue_event(event, NULL);
+ if (suspends_pending <= 0)
+ (void) suspend(1);
+ break;
+
+ case APM_NORMAL_RESUME:
+ case APM_CRITICAL_RESUME:
+ case APM_STANDBY_RESUME:
+ ignore_sys_suspend = 0;
+ last_resume = jiffies;
+ ignore_bounce = 1;
+ if ((event != APM_NORMAL_RESUME)
+ || (ignore_normal_resume == 0)) {
+ write_seqlock_irq(&xtime_lock);
+ set_time();
+ write_sequnlock_irq(&xtime_lock);
+ device_resume();
+ pm_send_all(PM_RESUME, (void *)0);
+ queue_event(event, NULL);
+ }
+ ignore_normal_resume = 0;
+ break;
+
+ case APM_CAPABILITY_CHANGE:
+ case APM_LOW_BATTERY:
+ case APM_POWER_STATUS_CHANGE:
+ queue_event(event, NULL);
+ /* If needed, notify drivers here */
+ break;
+
+ case APM_UPDATE_TIME:
+ write_seqlock_irq(&xtime_lock);
+ set_time();
+ write_sequnlock_irq(&xtime_lock);
+ break;
+
+ case APM_CRITICAL_SUSPEND:
+ /*
+ * We are not allowed to reject a critical suspend.
+ */
+ (void) suspend(0);
+ break;
+ }
+ }
+}
+
+static void apm_event_handler(void)
+{
+ static int pending_count = 4;
+ int err;
+
+ if ((standbys_pending > 0) || (suspends_pending > 0)) {
+ if ((apm_info.connection_version > 0x100) &&
+ (pending_count-- <= 0)) {
+ pending_count = 4;
+ if (debug)
+ printk(KERN_DEBUG "apm: setting state busy\n");
+ err = set_system_power_state(APM_STATE_BUSY);
+ if (err)
+ apm_error("busy", err);
+ }
+ } else
+ pending_count = 4;
+ check_events();
+}
+
+/*
+ * This is the APM thread main loop.
+ */
+
+static void apm_mainloop(void)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&apm_waitqueue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ for (;;) {
+ schedule_timeout(APM_CHECK_TIMEOUT);
+ if (exit_kapmd)
+ break;
+ /*
+ * Ok, check all events, check for idle (and mark us sleeping
+ * so as not to count towards the load average)..
+ */
+ set_current_state(TASK_INTERRUPTIBLE);
+ apm_event_handler();
+ }
+ remove_wait_queue(&apm_waitqueue, &wait);
+}
+
+static int check_apm_user(struct apm_user *as, const char *func)
+{
+ if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
+ printk(KERN_ERR "apm: %s passed bad filp\n", func);
+ return 1;
+ }
+ return 0;
+}
+
+static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
+{
+ struct apm_user * as;
+ int i;
+ apm_event_t event;
+
+ as = fp->private_data;
+ if (check_apm_user(as, "read"))
+ return -EIO;
+ if ((int)count < sizeof(apm_event_t))
+ return -EINVAL;
+ if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+ wait_event_interruptible(apm_waitqueue, !queue_empty(as));
+ i = count;
+ while ((i >= sizeof(event)) && !queue_empty(as)) {
+ event = get_queued_event(as);
+ if (copy_to_user(buf, &event, sizeof(event))) {
+ if (i < count)
+ break;
+ return -EFAULT;
+ }
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ as->suspends_read++;
+ break;
+
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ as->standbys_read++;
+ break;
+ }
+ buf += sizeof(event);
+ i -= sizeof(event);
+ }
+ if (i < count)
+ return count - i;
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ return 0;
+}
+
+static unsigned int do_poll(struct file *fp, poll_table * wait)
+{
+ struct apm_user * as;
+
+ as = fp->private_data;
+ if (check_apm_user(as, "poll"))
+ return 0;
+ poll_wait(fp, &apm_waitqueue, wait);
+ if (!queue_empty(as))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int do_ioctl(struct inode * inode, struct file *filp,
+ u_int cmd, u_long arg)
+{
+ struct apm_user * as;
+
+ as = filp->private_data;
+ if (check_apm_user(as, "ioctl"))
+ return -EIO;
+ if ((!as->suser) || (!as->writer))
+ return -EPERM;
+ switch (cmd) {
+ case APM_IOC_STANDBY:
+ if (as->standbys_read > 0) {
+ as->standbys_read--;
+ as->standbys_pending--;
+ standbys_pending--;
+ } else
+ queue_event(APM_USER_STANDBY, as);
+ if (standbys_pending <= 0)
+ standby();
+ break;
+ case APM_IOC_SUSPEND:
+ if (as->suspends_read > 0) {
+ as->suspends_read--;
+ as->suspends_pending--;
+ suspends_pending--;
+ } else
+ queue_event(APM_USER_SUSPEND, as);
+ if (suspends_pending <= 0) {
+ return suspend(1);
+ } else {
+ as->suspend_wait = 1;
+ wait_event_interruptible(apm_suspend_waitqueue,
+ as->suspend_wait == 0);
+ return as->suspend_result;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int do_release(struct inode * inode, struct file * filp)
+{
+ struct apm_user * as;
+
+ as = filp->private_data;
+ if (check_apm_user(as, "release"))
+ return 0;
+ filp->private_data = NULL;
+ if (as->standbys_pending > 0) {
+ standbys_pending -= as->standbys_pending;
+ if (standbys_pending <= 0)
+ standby();
+ }
+ if (as->suspends_pending > 0) {
+ suspends_pending -= as->suspends_pending;
+ if (suspends_pending <= 0)
+ (void) suspend(1);
+ }
+ spin_lock(&user_list_lock);
+ if (user_list == as)
+ user_list = as->next;
+ else {
+ struct apm_user * as1;
+
+ for (as1 = user_list;
+ (as1 != NULL) && (as1->next != as);
+ as1 = as1->next)
+ ;
+ if (as1 == NULL)
+ printk(KERN_ERR "apm: filp not in user list\n");
+ else
+ as1->next = as->next;
+ }
+ spin_unlock(&user_list_lock);
+ kfree(as);
+ return 0;
+}
+
+static int do_open(struct inode * inode, struct file * filp)
+{
+ struct apm_user * as;
+
+ as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+ if (as == NULL) {
+ printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
+ sizeof(*as));
+ return -ENOMEM;
+ }
+ as->magic = APM_BIOS_MAGIC;
+ as->event_tail = as->event_head = 0;
+ as->suspends_pending = as->standbys_pending = 0;
+ as->suspends_read = as->standbys_read = 0;
+ /*
+ * XXX - this is a tiny bit broken, when we consider BSD
+ * process accounting. If the device is opened by root, we
+ * instantly flag that we used superuser privs. Who knows,
+ * we might close the device immediately without doing a
+ * privileged operation -- cevans
+ */
+ as->suser = capable(CAP_SYS_ADMIN);
+ as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+ as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+ spin_lock(&user_list_lock);
+ as->next = user_list;
+ user_list = as;
+ spin_unlock(&user_list_lock);
+ filp->private_data = as;
+ return 0;
+}
+
+static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+ char * p;
+ unsigned short bx;
+ unsigned short cx;
+ unsigned short dx;
+ int error;
+ unsigned short ac_line_status = 0xff;
+ unsigned short battery_status = 0xff;
+ unsigned short battery_flag = 0xff;
+ int percentage = -1;
+ int time_units = -1;
+ char *units = "?";
+
+ p = buf;
+
+ if ((num_online_cpus() == 1) &&
+ !(error = apm_get_power_status(&bx, &cx, &dx))) {
+ ac_line_status = (bx >> 8) & 0xff;
+ battery_status = bx & 0xff;
+ if ((cx & 0xff) != 0xff)
+ percentage = cx & 0xff;
+
+ if (apm_info.connection_version > 0x100) {
+ battery_flag = (cx >> 8) & 0xff;
+ if (dx != 0xffff) {
+ units = (dx & 0x8000) ? "min" : "sec";
+ time_units = dx & 0x7fff;
+ }
+ }
+ }
+ /* Arguments, with symbols from linux/apm_bios.h. Information is
+ from the Get Power Status (0x0a) call unless otherwise noted.
+
+ 0) Linux driver version (this will change if format changes)
+ 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
+ 2) APM flags from APM Installation Check (0x00):
+ bit 0: APM_16_BIT_SUPPORT
+ bit 1: APM_32_BIT_SUPPORT
+ bit 2: APM_IDLE_SLOWS_CLOCK
+ bit 3: APM_BIOS_DISABLED
+ bit 4: APM_BIOS_DISENGAGED
+ 3) AC line status
+ 0x00: Off-line
+ 0x01: On-line
+ 0x02: On backup power (BIOS >= 1.1 only)
+ 0xff: Unknown
+ 4) Battery status
+ 0x00: High
+ 0x01: Low
+ 0x02: Critical
+ 0x03: Charging
+ 0x04: Selected battery not present (BIOS >= 1.2 only)
+ 0xff: Unknown
+ 5) Battery flag
+ bit 0: High
+ bit 1: Low
+ bit 2: Critical
+ bit 3: Charging
+ bit 7: No system battery
+ 0xff: Unknown
+ 6) Remaining battery life (percentage of charge):
+ 0-100: valid
+ -1: Unknown
+ 7) Remaining battery life (time units):
+ Number of remaining minutes or seconds
+ -1: Unknown
+ 8) min = minutes; sec = seconds */
+
+ p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ driver_version,
+ (apm_info.bios.version >> 8) & 0xff,
+ apm_info.bios.version & 0xff,
+ apm_info.bios.flags,
+ ac_line_status,
+ battery_status,
+ battery_flag,
+ percentage,
+ time_units,
+ units);
+
+ return p - buf;
+}
+
+static int apm(void *unused)
+{
+ unsigned short bx;
+ unsigned short cx;
+ unsigned short dx;
+ int error;
+ char * power_stat;
+ char * bat_stat;
+
+ kapmd_running = 1;
+
+ daemonize("kapmd");
+
+ current->flags |= PF_NOFREEZE;
+
+#ifdef CONFIG_SMP
+ /* 2002/08/01 - WT
+ * This is to avoid random crashes at boot time during initialization
+ * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D.
+ * Some bioses don't like being called from CPU != 0.
+ * Method suggested by Ingo Molnar.
+ */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+#endif
+
+ if (apm_info.connection_version == 0) {
+ apm_info.connection_version = apm_info.bios.version;
+ if (apm_info.connection_version > 0x100) {
+ /*
+ * We only support BIOSs up to version 1.2
+ */
+ if (apm_info.connection_version > 0x0102)
+ apm_info.connection_version = 0x0102;
+ error = apm_driver_version(&apm_info.connection_version);
+ if (error != APM_SUCCESS) {
+ apm_error("driver version", error);
+ /* Fall back to an APM 1.0 connection. */
+ apm_info.connection_version = 0x100;
+ }
+ }
+ }
+
+ if (debug)
+ printk(KERN_INFO "apm: Connection version %d.%d\n",
+ (apm_info.connection_version >> 8) & 0xff,
+ apm_info.connection_version & 0xff);
+
+#ifdef CONFIG_APM_DO_ENABLE
+ if (apm_info.bios.flags & APM_BIOS_DISABLED) {
+ /*
+ * This call causes my NEC UltraLite Versa 33/C to hang if it
+ * is booted with PM disabled but not in the docking station.
+ * Unfortunate ...
+ */
+ error = apm_enable_power_management(1);
+ if (error) {
+ apm_error("enable power management", error);
+ return -1;
+ }
+ }
+#endif
+
+ if ((apm_info.bios.flags & APM_BIOS_DISENGAGED)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+ if (error) {
+ apm_error("engage power management", error);
+ return -1;
+ }
+ }
+
+ if (debug && (num_online_cpus() == 1 || smp )) {
+ error = apm_get_power_status(&bx, &cx, &dx);
+ if (error)
+ printk(KERN_INFO "apm: power status not available\n");
+ else {
+ switch ((bx >> 8) & 0xff) {
+ case 0: power_stat = "off line"; break;
+ case 1: power_stat = "on line"; break;
+ case 2: power_stat = "on backup power"; break;
+ default: power_stat = "unknown"; break;
+ }
+ switch (bx & 0xff) {
+ case 0: bat_stat = "high"; break;
+ case 1: bat_stat = "low"; break;
+ case 2: bat_stat = "critical"; break;
+ case 3: bat_stat = "charging"; break;
+ default: bat_stat = "unknown"; break;
+ }
+ printk(KERN_INFO
+ "apm: AC %s, battery status %s, battery life ",
+ power_stat, bat_stat);
+ if ((cx & 0xff) == 0xff)
+ printk("unknown\n");
+ else
+ printk("%d%%\n", cx & 0xff);
+ if (apm_info.connection_version > 0x100) {
+ printk(KERN_INFO
+ "apm: battery flag 0x%02x, battery life ",
+ (cx >> 8) & 0xff);
+ if (dx == 0xffff)
+ printk("unknown\n");
+ else
+ printk("%d %s\n", dx & 0x7fff,
+ (dx & 0x8000) ?
+ "minutes" : "seconds");
+ }
+ }
+ }
+
+ /* Install our power off handler.. */
+ if (power_off)
+ pm_power_off = apm_power_off;
+
+ if (num_online_cpus() == 1 || smp) {
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+ console_blank_hook = apm_console_blank;
+#endif
+ apm_mainloop();
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+ console_blank_hook = NULL;
+#endif
+ }
+ kapmd_running = 0;
+
+ return 0;
+}
+
+#ifndef MODULE
+static int __init apm_setup(char *str)
+{
+ int invert;
+
+ while ((str != NULL) && (*str != '\0')) {
+ if (strncmp(str, "off", 3) == 0)
+ apm_disabled = 1;
+ if (strncmp(str, "on", 2) == 0)
+ apm_disabled = 0;
+ if ((strncmp(str, "bounce-interval=", 16) == 0) ||
+ (strncmp(str, "bounce_interval=", 16) == 0))
+ bounce_interval = simple_strtol(str + 16, NULL, 0);
+ if ((strncmp(str, "idle-threshold=", 15) == 0) ||
+ (strncmp(str, "idle_threshold=", 15) == 0))
+ idle_threshold = simple_strtol(str + 15, NULL, 0);
+ if ((strncmp(str, "idle-period=", 12) == 0) ||
+ (strncmp(str, "idle_period=", 12) == 0))
+ idle_period = simple_strtol(str + 12, NULL, 0);
+ invert = (strncmp(str, "no-", 3) == 0) ||
+ (strncmp(str, "no_", 3) == 0);
+ if (invert)
+ str += 3;
+ if (strncmp(str, "debug", 5) == 0)
+ debug = !invert;
+ if ((strncmp(str, "power-off", 9) == 0) ||
+ (strncmp(str, "power_off", 9) == 0))
+ power_off = !invert;
+ if (strncmp(str, "smp", 3) == 0)
+ {
+ smp = !invert;
+ idle_threshold = 100;
+ }
+ if ((strncmp(str, "allow-ints", 10) == 0) ||
+ (strncmp(str, "allow_ints", 10) == 0))
+ apm_info.allow_ints = !invert;
+ if ((strncmp(str, "broken-psr", 10) == 0) ||
+ (strncmp(str, "broken_psr", 10) == 0))
+ apm_info.get_power_status_broken = !invert;
+ if ((strncmp(str, "realmode-power-off", 18) == 0) ||
+ (strncmp(str, "realmode_power_off", 18) == 0))
+ apm_info.realmode_power_off = !invert;
+ str = strchr(str, ',');
+ if (str != NULL)
+ str += strspn(str, ", \t");
+ }
+ return 1;
+}
+
+__setup("apm=", apm_setup);
+#endif
+
+static struct file_operations apm_bios_fops = {
+ .owner = THIS_MODULE,
+ .read = do_read,
+ .poll = do_poll,
+ .ioctl = do_ioctl,
+ .open = do_open,
+ .release = do_release,
+};
+
+static struct miscdevice apm_device = {
+ APM_MINOR_DEV,
+ "apm_bios",
+ &apm_bios_fops
+};
+
+
+/* Simple "print if true" callback */
+static int __init print_if_true(struct dmi_system_id *d)
+{
+ printk("%s\n", d->ident);
+ return 0;
+}
+
+/*
+ * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was
+ * disabled before the suspend. Linux used to get terribly confused by that.
+ */
+static int __init broken_ps2_resume(struct dmi_system_id *d)
+{
+ printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident);
+ return 0;
+}
+
+/* Some bioses have a broken protected mode poweroff and need to use realmode */
+static int __init set_realmode_power_off(struct dmi_system_id *d)
+{
+ if (apm_info.realmode_power_off == 0) {
+ apm_info.realmode_power_off = 1;
+ printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident);
+ }
+ return 0;
+}
+
+/* Some laptops require interrupts to be enabled during APM calls */
+static int __init set_apm_ints(struct dmi_system_id *d)
+{
+ if (apm_info.allow_ints == 0) {
+ apm_info.allow_ints = 1;
+ printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident);
+ }
+ return 0;
+}
+
+/* Some APM bioses corrupt memory or just plain do not work */
+static int __init apm_is_horked(struct dmi_system_id *d)
+{
+ if (apm_info.disabled == 0) {
+ apm_info.disabled = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+ }
+ return 0;
+}
+
+static int __init apm_is_horked_d850md(struct dmi_system_id *d)
+{
+ if (apm_info.disabled == 0) {
+ apm_info.disabled = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+ printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n");
+ printk(KERN_INFO "download from support.intel.com \n");
+ }
+ return 0;
+}
+
+/* Some APM bioses hang on APM idle calls */
+static int __init apm_likes_to_melt(struct dmi_system_id *d)
+{
+ if (apm_info.forbid_idle == 0) {
+ apm_info.forbid_idle = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident);
+ }
+ return 0;
+}
+
+/*
+ * Check for clue free BIOS implementations who use
+ * the following QA technique
+ *
+ * [ Write BIOS Code ]<------
+ * | ^
+ * < Does it Compile >----N--
+ * |Y ^
+ * < Does it Boot Win98 >-N--
+ * |Y
+ * [Ship It]
+ *
+ * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e)
+ * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000)
+ */
+static int __init broken_apm_power(struct dmi_system_id *d)
+{
+ apm_info.get_power_status_broken = 1;
+ printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n");
+ return 0;
+}
+
+/*
+ * This bios swaps the APM minute reporting bytes over (Many sony laptops
+ * have this problem).
+ */
+static int __init swab_apm_power_in_minutes(struct dmi_system_id *d)
+{
+ apm_info.get_power_status_swabinminutes = 1;
+ printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n");
+ return 0;
+}
+
+static struct dmi_system_id __initdata apm_dmi_table[] = {
+ {
+ print_if_true,
+ KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.",
+ { DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), },
+ },
+ { /* Handle problems with APM on the C600 */
+ broken_ps2_resume, "Dell Latitude C600",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), },
+ },
+ { /* Allow interrupts during suspend on Dell Latitude laptops*/
+ set_apm_ints, "Dell Latitude",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), }
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* Allow interrupts during suspend on Dell Inspiron laptops*/
+ set_apm_ints, "Dell Inspiron", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), },
+ },
+ { /* Handle problems with APM on Inspiron 5000e */
+ broken_apm_power, "Dell Inspiron 5000e",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A04"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), },
+ },
+ { /* Handle problems with APM on Inspiron 2500 */
+ broken_apm_power, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A12"),
+ DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Dimension 4100",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* Allow interrupts during suspend on Compaq Laptops*/
+ set_apm_ints, "Compaq 12XL125",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"4.06"), },
+ },
+ { /* Allow interrupts during APM or the clock goes slow */
+ set_apm_ints, "ASUSTeK",
+ { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), },
+ },
+ { /* APM blows on shutdown */
+ apm_is_horked, "ABIT KX7-333[R]",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"),
+ DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Trigem Delhi3",
+ { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Fujitsu-Siemens",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), },
+ },
+ { /* APM crashes */
+ apm_is_horked_d850md, "Intel D850MD",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Intel D810EMO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell XPS-Z",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "A11"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Sharp PC-PJ/AX",
+ { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"),
+ DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* APM idle hangs */
+ apm_likes_to_melt, "Jabil AMD",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), },
+ },
+ { /* APM idle hangs */
+ apm_likes_to_melt, "AMI Bios",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0206H"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-N505VX */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"),
+ DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-XG29 */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"),
+ DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600NE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600NE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-F104K */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), },
+ },
+
+ { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"),
+ DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"),
+ DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), },
+ },
+ { /* broken PM poweroff bios */
+ set_realmode_power_off, "Award Software v4.60 PGMA",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"),
+ DMI_MATCH(DMI_BIOS_DATE, "134526184"), },
+ },
+
+ /* Generic per vendor APM settings */
+
+ { /* Allow interrupts during suspend on IBM laptops */
+ set_apm_ints, "IBM",
+ { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+ },
+
+ { }
+};
+
+/*
+ * Just start the APM thread. We do NOT want to do APM BIOS
+ * calls from anything but the APM thread, if for no other reason
+ * than the fact that we don't trust the APM BIOS. This way,
+ * most common APM BIOS problems that lead to protection errors
+ * etc will have at least some level of being contained...
+ *
+ * In short, if something bad happens, at least we have a choice
+ * of just killing the apm thread..
+ */
+static int __init apm_init(void)
+{
+ struct proc_dir_entry *apm_proc;
+ int ret;
+ int i;
+
+ dmi_check_system(apm_dmi_table);
+
+ if (apm_info.bios.version == 0) {
+ printk(KERN_INFO "apm: BIOS not found.\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO
+ "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
+ ((apm_info.bios.version >> 8) & 0xff),
+ (apm_info.bios.version & 0xff),
+ apm_info.bios.flags,
+ driver_version);
+ if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) {
+ printk(KERN_INFO "apm: no 32 bit BIOS support\n");
+ return -ENODEV;
+ }
+
+ if (allow_ints)
+ apm_info.allow_ints = 1;
+ if (broken_psr)
+ apm_info.get_power_status_broken = 1;
+ if (realmode_power_off)
+ apm_info.realmode_power_off = 1;
+ /* User can override, but default is to trust DMI */
+ if (apm_disabled != -1)
+ apm_info.disabled = apm_disabled;
+
+ /*
+ * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1
+ * but is reportedly a 1.0 BIOS.
+ */
+ if (apm_info.bios.version == 0x001)
+ apm_info.bios.version = 0x100;
+
+ /* BIOS < 1.2 doesn't set cseg_16_len */
+ if (apm_info.bios.version < 0x102)
+ apm_info.bios.cseg_16_len = 0; /* 64k */
+
+ if (debug) {
+ printk(KERN_INFO "apm: entry %x:%lx cseg16 %x dseg %x",
+ apm_info.bios.cseg, apm_info.bios.offset,
+ apm_info.bios.cseg_16, apm_info.bios.dseg);
+ if (apm_info.bios.version > 0x100)
+ printk(" cseg len %x, dseg len %x",
+ apm_info.bios.cseg_len,
+ apm_info.bios.dseg_len);
+ if (apm_info.bios.version > 0x101)
+ printk(" cseg16 len %x", apm_info.bios.cseg_16_len);
+ printk("\n");
+ }
+
+ if (apm_info.disabled) {
+ printk(KERN_NOTICE "apm: disabled on user request.\n");
+ return -ENODEV;
+ }
+ if ((num_online_cpus() > 1) && !power_off && !smp) {
+ printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
+ apm_info.disabled = 1;
+ return -ENODEV;
+ }
+ if (PM_IS_ACTIVE()) {
+ printk(KERN_NOTICE "apm: overridden by ACPI.\n");
+ apm_info.disabled = 1;
+ return -ENODEV;
+ }
+ pm_active = 1;
+
+ /*
+ * Set up a segment that references the real mode segment 0x40
+ * that extends up to the end of page zero (that we have reserved).
+ * This is for buggy BIOS's that refer to (real mode) segment 0x40
+ * even though they are called in protected mode.
+ */
+ set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
+ _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
+
+ apm_bios_entry.offset = apm_info.bios.offset;
+ apm_bios_entry.segment = APM_CS;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ __va((unsigned long)apm_info.bios.cseg << 4));
+ set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ __va((unsigned long)apm_info.bios.cseg_16 << 4));
+ set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ __va((unsigned long)apm_info.bios.dseg << 4));
+#ifndef APM_RELAX_SEGMENTS
+ if (apm_info.bios.version == 0x100) {
+#endif
+ /* For ASUS motherboard, Award BIOS rev 110 (and others?) */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+ /* For some unknown machine. */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+ /* For the DEC Hinote Ultra CT475 (and others?) */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+#ifndef APM_RELAX_SEGMENTS
+ } else {
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ (apm_info.bios.cseg_len - 1) & 0xffff);
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ (apm_info.bios.cseg_16_len - 1) & 0xffff);
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ (apm_info.bios.dseg_len - 1) & 0xffff);
+ /* workaround for broken BIOSes */
+ if (apm_info.bios.cseg_len <= apm_info.bios.offset)
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+ if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
+ /* for the BIOS that assumes granularity = 1 */
+ per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+ printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
+ }
+ }
+#endif
+ }
+
+ apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info);
+ if (apm_proc)
+ apm_proc->owner = THIS_MODULE;
+
+ ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD);
+ if (ret < 0) {
+ printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n");
+ return -ENOMEM;
+ }
+
+ if (num_online_cpus() > 1 && !smp ) {
+ printk(KERN_NOTICE
+ "apm: disabled - APM is not SMP safe (power off active).\n");
+ return 0;
+ }
+
+ misc_register(&apm_device);
+
+ if (HZ != 100)
+ idle_period = (idle_period * HZ) / 100;
+ if (idle_threshold < 100) {
+ original_pm_idle = pm_idle;
+ pm_idle = apm_cpu_idle;
+ set_pm_idle = 1;
+ }
+
+ return 0;
+}
+
+static void __exit apm_exit(void)
+{
+ int error;
+
+ if (set_pm_idle) {
+ pm_idle = original_pm_idle;
+ /*
+ * We are about to unload the current idle thread pm callback
+ * (pm_idle), Wait for all processors to update cached/local
+ * copies of pm_idle before proceeding.
+ */
+ cpu_idle_wait();
+ }
+ if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 0);
+ if (error)
+ apm_error("disengage power management", error);
+ }
+ misc_deregister(&apm_device);
+ remove_proc_entry("apm", NULL);
+ if (power_off)
+ pm_power_off = NULL;
+ exit_kapmd = 1;
+ while (kapmd_running)
+ schedule();
+ pm_active = 0;
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Enable debug mode");
+module_param(power_off, bool, 0444);
+MODULE_PARM_DESC(power_off, "Enable power off");
+module_param(bounce_interval, int, 0444);
+MODULE_PARM_DESC(bounce_interval,
+ "Set the number of ticks to ignore suspend bounces");
+module_param(allow_ints, bool, 0444);
+MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls");
+module_param(broken_psr, bool, 0444);
+MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call");
+module_param(realmode_power_off, bool, 0444);
+MODULE_PARM_DESC(realmode_power_off,
+ "Switch to real mode before powering off");
+module_param(idle_threshold, int, 0444);
+MODULE_PARM_DESC(idle_threshold,
+ "System idle percentage above which to make APM BIOS idle calls");
+module_param(idle_period, int, 0444);
+MODULE_PARM_DESC(idle_period,
+ "Period (in sec/100) over which to caculate the idle percentage");
+module_param(smp, bool, 0444);
+MODULE_PARM_DESC(smp,
+ "Set this to enable APM use on an SMP platform. Use with caution on older systems");
+MODULE_ALIAS_MISCDEV(APM_MINOR_DEV);
diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c
new file mode 100644
index 0000000..36d66e2
--- /dev/null
+++ b/arch/i386/kernel/asm-offsets.c
@@ -0,0 +1,72 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/ucontext.h>
+#include "sigframe.h"
+#include <asm/fixmap.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+ OFFSET(SIGCONTEXT_eax, sigcontext, eax);
+ OFFSET(SIGCONTEXT_ebx, sigcontext, ebx);
+ OFFSET(SIGCONTEXT_ecx, sigcontext, ecx);
+ OFFSET(SIGCONTEXT_edx, sigcontext, edx);
+ OFFSET(SIGCONTEXT_esi, sigcontext, esi);
+ OFFSET(SIGCONTEXT_edi, sigcontext, edi);
+ OFFSET(SIGCONTEXT_ebp, sigcontext, ebp);
+ OFFSET(SIGCONTEXT_esp, sigcontext, esp);
+ OFFSET(SIGCONTEXT_eip, sigcontext, eip);
+ BLANK();
+
+ OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
+ OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
+ OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
+ OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+ OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math);
+ OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
+ OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
+ OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
+ BLANK();
+
+ OFFSET(TI_task, thread_info, task);
+ OFFSET(TI_exec_domain, thread_info, exec_domain);
+ OFFSET(TI_flags, thread_info, flags);
+ OFFSET(TI_status, thread_info, status);
+ OFFSET(TI_cpu, thread_info, cpu);
+ OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_addr_limit, thread_info, addr_limit);
+ OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+
+ OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+ OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+ BLANK();
+
+ OFFSET(pbe_address, pbe, address);
+ OFFSET(pbe_orig_address, pbe, orig_address);
+ OFFSET(pbe_next, pbe, next);
+
+ /* Offset from the sysenter stack to tss.esp0 */
+ DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, esp0) -
+ sizeof(struct tss_struct));
+
+ DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+ DEFINE(VSYSCALL_BASE, __fix_to_virt(FIX_VSYSCALL));
+}
diff --git a/arch/i386/kernel/bootflag.c b/arch/i386/kernel/bootflag.c
new file mode 100644
index 0000000..4c30ed0
--- /dev/null
+++ b/arch/i386/kernel/bootflag.c
@@ -0,0 +1,99 @@
+/*
+ * Implement 'Simple Boot Flag Specification 2.0'
+ */
+
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+
+#include <linux/mc146818rtc.h>
+
+
+#define SBF_RESERVED (0x78)
+#define SBF_PNPOS (1<<0)
+#define SBF_BOOTING (1<<1)
+#define SBF_DIAG (1<<2)
+#define SBF_PARITY (1<<7)
+
+
+int sbf_port __initdata = -1; /* set via acpi_boot_init() */
+
+
+static int __init parity(u8 v)
+{
+ int x = 0;
+ int i;
+
+ for(i=0;i<8;i++)
+ {
+ x^=(v&1);
+ v>>=1;
+ }
+ return x;
+}
+
+static void __init sbf_write(u8 v)
+{
+ unsigned long flags;
+ if(sbf_port != -1)
+ {
+ v &= ~SBF_PARITY;
+ if(!parity(v))
+ v|=SBF_PARITY;
+
+ printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", sbf_port, v);
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ CMOS_WRITE(v, sbf_port);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ }
+}
+
+static u8 __init sbf_read(void)
+{
+ u8 v;
+ unsigned long flags;
+ if(sbf_port == -1)
+ return 0;
+ spin_lock_irqsave(&rtc_lock, flags);
+ v = CMOS_READ(sbf_port);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return v;
+}
+
+static int __init sbf_value_valid(u8 v)
+{
+ if(v&SBF_RESERVED) /* Reserved bits */
+ return 0;
+ if(!parity(v))
+ return 0;
+ return 1;
+}
+
+static int __init sbf_init(void)
+{
+ u8 v;
+ if(sbf_port == -1)
+ return 0;
+ v = sbf_read();
+ if(!sbf_value_valid(v))
+ printk(KERN_WARNING "Simple Boot Flag value 0x%x read from CMOS RAM was invalid\n",v);
+
+ v &= ~SBF_RESERVED;
+ v &= ~SBF_BOOTING;
+ v &= ~SBF_DIAG;
+#if defined(CONFIG_ISAPNP)
+ v |= SBF_PNPOS;
+#endif
+ sbf_write(v);
+ return 0;
+}
+
+module_init(sbf_init);
diff --git a/arch/i386/kernel/cpu/Makefile b/arch/i386/kernel/cpu/Makefile
new file mode 100644
index 0000000..010aecf
--- /dev/null
+++ b/arch/i386/kernel/cpu/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for x86-compatible CPU details and quirks
+#
+
+obj-y := common.o proc.o
+
+obj-y += amd.o
+obj-y += cyrix.o
+obj-y += centaur.o
+obj-y += transmeta.o
+obj-y += intel.o intel_cacheinfo.o
+obj-y += rise.o
+obj-y += nexgen.o
+obj-y += umc.o
+
+obj-$(CONFIG_X86_MCE) += mcheck/
+
+obj-$(CONFIG_MTRR) += mtrr/
+obj-$(CONFIG_CPU_FREQ) += cpufreq/
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
new file mode 100644
index 0000000..ae94585
--- /dev/null
+++ b/arch/i386/kernel/cpu/amd.c
@@ -0,0 +1,249 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
+ * misexecution of code under Linux. Owners of such processors should
+ * contact AMD for precise details and a CPU swap.
+ *
+ * See http://www.multimania.com/poulot/k6bug.html
+ * http://www.amd.com/K6/k6docs/revgd.html
+ *
+ * The following test is erm.. interesting. AMD neglected to up
+ * the chip setting when fixing the bug but they also tweaked some
+ * performance at the same time..
+ */
+
+extern void vide(void);
+__asm__(".align 4\nvide: ret");
+
+static void __init init_amd(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ int mbytes = num_physpages >> (20-PAGE_SHIFT);
+ int r;
+
+ /*
+ * FIXME: We should handle the K5 here. Set up the write
+ * range and also turn on MSR 83 bits 4 and 31 (write alloc,
+ * no bus pipeline)
+ */
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ r = get_model_name(c);
+
+ switch(c->x86)
+ {
+ case 4:
+ /*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
+#define CBAR_ENB (0x80000000)
+#define CBAR_KEY (0X000000CB)
+ if (c->x86_model==9 || c->x86_model == 10) {
+ if (inl (CBAR) & CBAR_ENB)
+ outl (0 | CBAR_KEY, CBAR);
+ }
+ break;
+ case 5:
+ if( c->x86_model < 6 )
+ {
+ /* Based on AMD doc 20734R - June 2000 */
+ if ( c->x86_model == 0 ) {
+ clear_bit(X86_FEATURE_APIC, c->x86_capability);
+ set_bit(X86_FEATURE_PGE, c->x86_capability);
+ }
+ break;
+ }
+
+ if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+ const int K6_BUG_LOOP = 1000000;
+ int n;
+ void (*f_vide)(void);
+ unsigned long d, d2;
+
+ printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+ /*
+ * It looks like AMD fixed the 2.6.2 bug and improved indirect
+ * calls at the same time.
+ */
+
+ n = K6_BUG_LOOP;
+ f_vide = vide;
+ rdtscl(d);
+ while (n--)
+ f_vide();
+ rdtscl(d2);
+ d = d2-d;
+
+ /* Knock these two lines out if it debugs out ok */
+ printk(KERN_INFO "AMD K6 stepping B detected - ");
+ /* -- cut here -- */
+ if (d > 20*K6_BUG_LOOP)
+ printk("system stability may be impaired when more than 32 MB are used.\n");
+ else
+ printk("probably OK (after B9730xxxx).\n");
+ printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+ }
+
+ /* K6 with old style WHCR */
+ if (c->x86_model < 8 ||
+ (c->x86_model== 8 && c->x86_mask < 8)) {
+ /* We can only write allocate on the low 508Mb */
+ if(mbytes>508)
+ mbytes=508;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0x0000FFFF)==0) {
+ unsigned long flags;
+ l=(1<<0)|((mbytes/4)<<1);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+ break;
+ }
+
+ if ((c->x86_model == 8 && c->x86_mask >7) ||
+ c->x86_model == 9 || c->x86_model == 13) {
+ /* The more serious chips .. */
+
+ if(mbytes>4092)
+ mbytes=4092;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0xFFFF0000)==0) {
+ unsigned long flags;
+ l=((mbytes>>2)<<22)|(1<<16);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+ break;
+ }
+ break;
+
+ case 6: /* An Athlon/Duron */
+
+ /* Bit 15 of Athlon specific MSR 15, needs to be 0
+ * to enable SSE on Palomino/Morgan/Barton CPU's.
+ * If the BIOS didn't enable it already, enable it here.
+ */
+ if (c->x86_model >= 6 && c->x86_model <= 10) {
+ if (!cpu_has(c, X86_FEATURE_XMM)) {
+ printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+ rdmsr(MSR_K7_HWCR, l, h);
+ l &= ~0x00008000;
+ wrmsr(MSR_K7_HWCR, l, h);
+ set_bit(X86_FEATURE_XMM, c->x86_capability);
+ }
+ }
+
+ /* It's been determined by AMD that Athlons since model 8 stepping 1
+ * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+ * As per AMD technical note 27212 0.2
+ */
+ if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+ rdmsr(MSR_K7_CLK_CTL, l, h);
+ if ((l & 0xfff00000) != 0x20000000) {
+ printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+ ((l & 0x000fffff)|0x20000000));
+ wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+ }
+ }
+ break;
+ }
+
+ switch (c->x86) {
+ case 15:
+ set_bit(X86_FEATURE_K8, c->x86_capability);
+ break;
+ case 6:
+ set_bit(X86_FEATURE_K7, c->x86_capability);
+ break;
+ }
+
+ display_cacheinfo(c);
+ detect_ht(c);
+
+#ifdef CONFIG_X86_HT
+ /* AMD dual core looks like HT but isn't really. Hide it from the
+ scheduler. This works around problems with the domain scheduler.
+ Also probably gives slightly better scheduling and disables
+ SMT nice which is harmful on dual core.
+ TBD tune the domain scheduler for dual core. */
+ if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+ smp_num_siblings = 1;
+#endif
+
+ if (cpuid_eax(0x80000000) >= 0x80000008) {
+ c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+ if (c->x86_num_cores & (c->x86_num_cores - 1))
+ c->x86_num_cores = 1;
+ }
+}
+
+static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* AMD errata T13 (order #21922) */
+ if ((c->x86 == 6)) {
+ if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
+ size = 64;
+ if (c->x86_model == 4 &&
+ (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
+ size = 256;
+ }
+ return size;
+}
+
+static struct cpu_dev amd_cpu_dev __initdata = {
+ .c_vendor = "AMD",
+ .c_ident = { "AuthenticAMD" },
+ .c_models = {
+ { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
+ {
+ [3] = "486 DX/2",
+ [7] = "486 DX/2-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB",
+ [14] = "Am5x86-WT",
+ [15] = "Am5x86-WB"
+ }
+ },
+ },
+ .c_init = init_amd,
+ .c_identify = generic_identify,
+ .c_size_cache = amd_size_cache,
+};
+
+int __init amd_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(amd_init_cpu);
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
new file mode 100644
index 0000000..394814e
--- /dev/null
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -0,0 +1,476 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/e820.h>
+#include "cpu.h"
+
+#ifdef CONFIG_X86_OOSTORE
+
+static u32 __init power2(u32 x)
+{
+ u32 s=1;
+ while(s<=x)
+ s<<=1;
+ return s>>=1;
+}
+
+
+/*
+ * Set up an actual MCR
+ */
+
+static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+{
+ u32 lo, hi;
+
+ hi = base & ~0xFFF;
+ lo = ~(size-1); /* Size is a power of 2 so this makes a mask */
+ lo &= ~0xFFF; /* Remove the ctrl value bits */
+ lo |= key; /* Attribute we wish to set */
+ wrmsr(reg+MSR_IDT_MCR0, lo, hi);
+ mtrr_centaur_report_mcr(reg, lo, hi); /* Tell the mtrr driver */
+}
+
+/*
+ * Figure what we can cover with MCR's
+ *
+ * Shortcut: We know you can't put 4Gig of RAM on a winchip
+ */
+
+static u32 __init ramtop(void) /* 16388 */
+{
+ int i;
+ u32 top = 0;
+ u32 clip = 0xFFFFFFFFUL;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long start, end;
+
+ if (e820.map[i].addr > 0xFFFFFFFFUL)
+ continue;
+ /*
+ * Don't MCR over reserved space. Ignore the ISA hole
+ * we frob around that catastrophy already
+ */
+
+ if (e820.map[i].type == E820_RESERVED)
+ {
+ if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+ clip = e820.map[i].addr;
+ continue;
+ }
+ start = e820.map[i].addr;
+ end = e820.map[i].addr + e820.map[i].size;
+ if (start >= end)
+ continue;
+ if (end > top)
+ top = end;
+ }
+ /* Everything below 'top' should be RAM except for the ISA hole.
+ Because of the limited MCR's we want to map NV/ACPI into our
+ MCR range for gunk in RAM
+
+ Clip might cause us to MCR insufficient RAM but that is an
+ acceptable failure mode and should only bite obscure boxes with
+ a VESA hole at 15Mb
+
+ The second case Clip sometimes kicks in is when the EBDA is marked
+ as reserved. Again we fail safe with reasonable results
+ */
+
+ if(top>clip)
+ top=clip;
+
+ return top;
+}
+
+/*
+ * Compute a set of MCR's to give maximum coverage
+ */
+
+static int __init centaur_mcr_compute(int nr, int key)
+{
+ u32 mem = ramtop();
+ u32 root = power2(mem);
+ u32 base = root;
+ u32 top = root;
+ u32 floor = 0;
+ int ct = 0;
+
+ while(ct<nr)
+ {
+ u32 fspace = 0;
+
+ /*
+ * Find the largest block we will fill going upwards
+ */
+
+ u32 high = power2(mem-top);
+
+ /*
+ * Find the largest block we will fill going downwards
+ */
+
+ u32 low = base/2;
+
+ /*
+ * Don't fill below 1Mb going downwards as there
+ * is an ISA hole in the way.
+ */
+
+ if(base <= 1024*1024)
+ low = 0;
+
+ /*
+ * See how much space we could cover by filling below
+ * the ISA hole
+ */
+
+ if(floor == 0)
+ fspace = 512*1024;
+ else if(floor ==512*1024)
+ fspace = 128*1024;
+
+ /* And forget ROM space */
+
+ /*
+ * Now install the largest coverage we get
+ */
+
+ if(fspace > high && fspace > low)
+ {
+ centaur_mcr_insert(ct, floor, fspace, key);
+ floor += fspace;
+ }
+ else if(high > low)
+ {
+ centaur_mcr_insert(ct, top, high, key);
+ top += high;
+ }
+ else if(low > 0)
+ {
+ base -= low;
+ centaur_mcr_insert(ct, base, low, key);
+ }
+ else break;
+ ct++;
+ }
+ /*
+ * We loaded ct values. We now need to set the mask. The caller
+ * must do this bit.
+ */
+
+ return ct;
+}
+
+static void __init centaur_create_optimal_mcr(void)
+{
+ int i;
+ /*
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining and weak write ordered.
+ *
+ * To experiment with: Linux never uses stack operations for
+ * mmio spaces so we could globally enable stack operation wc
+ *
+ * Load the registers with type 31 - full write combining, all
+ * writes weakly ordered.
+ */
+ int used = centaur_mcr_compute(6, 31);
+
+ /*
+ * Wipe unused MCRs
+ */
+
+ for(i=used;i<8;i++)
+ wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+static void __init winchip2_create_optimal_mcr(void)
+{
+ u32 lo, hi;
+ int i;
+
+ /*
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining, weak store ordered.
+ *
+ * Load the registers with type 25
+ * 8 - weak write ordering
+ * 16 - weak read ordering
+ * 1 - write combining
+ */
+
+ int used = centaur_mcr_compute(6, 25);
+
+ /*
+ * Mark the registers we are using.
+ */
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ for(i=0;i<used;i++)
+ lo|=1<<(9+i);
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+
+ /*
+ * Wipe unused MCRs
+ */
+
+ for(i=used;i<8;i++)
+ wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+/*
+ * Handle the MCR key on the Winchip 2.
+ */
+
+static void __init winchip2_unprotect_mcr(void)
+{
+ u32 lo, hi;
+ u32 key;
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ lo&=~0x1C0; /* blank bits 8-6 */
+ key = (lo>>17) & 7;
+ lo |= key<<6; /* replace with unlock key */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+static void __init winchip2_protect_mcr(void)
+{
+ u32 lo, hi;
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ lo&=~0x1C0; /* blank bits 8-6 */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+#endif /* CONFIG_X86_OOSTORE */
+
+#define ACE_PRESENT (1 << 6)
+#define ACE_ENABLED (1 << 7)
+#define ACE_FCR (1 << 28) /* MSR_VIA_FCR */
+
+#define RNG_PRESENT (1 << 2)
+#define RNG_ENABLED (1 << 3)
+#define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */
+
+static void __init init_c3(struct cpuinfo_x86 *c)
+{
+ u32 lo, hi;
+
+ /* Test for Centaur Extended Feature Flags presence */
+ if (cpuid_eax(0xC0000000) >= 0xC0000001) {
+ u32 tmp = cpuid_edx(0xC0000001);
+
+ /* enable ACE unit, if present and disabled */
+ if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
+ rdmsr (MSR_VIA_FCR, lo, hi);
+ lo |= ACE_FCR; /* enable ACE unit */
+ wrmsr (MSR_VIA_FCR, lo, hi);
+ printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
+ }
+
+ /* enable RNG unit, if present and disabled */
+ if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
+ rdmsr (MSR_VIA_RNG, lo, hi);
+ lo |= RNG_ENABLE; /* enable RNG unit */
+ wrmsr (MSR_VIA_RNG, lo, hi);
+ printk(KERN_INFO "CPU: Enabled h/w RNG\n");
+ }
+
+ /* store Centaur Extended Feature Flags as
+ * word 5 of the CPU capability bit array
+ */
+ c->x86_capability[5] = cpuid_edx(0xC0000001);
+ }
+
+ /* Cyrix III family needs CX8 & PGE explicity enabled. */
+ if (c->x86_model >=6 && c->x86_model <= 9) {
+ rdmsr (MSR_VIA_FCR, lo, hi);
+ lo |= (1<<1 | 1<<7);
+ wrmsr (MSR_VIA_FCR, lo, hi);
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+ }
+
+ /* Before Nehemiah, the C3's had 3dNOW! */
+ if (c->x86_model >=6 && c->x86_model <9)
+ set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+
+ get_model_name(c);
+ display_cacheinfo(c);
+}
+
+static void __init init_centaur(struct cpuinfo_x86 *c)
+{
+ enum {
+ ECX8=1<<1,
+ EIERRINT=1<<2,
+ DPM=1<<3,
+ DMCE=1<<4,
+ DSTPCLK=1<<5,
+ ELINEAR=1<<6,
+ DSMC=1<<7,
+ DTLOCK=1<<8,
+ EDCTLB=1<<8,
+ EMMX=1<<9,
+ DPDC=1<<11,
+ EBRPRED=1<<12,
+ DIC=1<<13,
+ DDC=1<<14,
+ DNA=1<<15,
+ ERETSTK=1<<16,
+ E2MMX=1<<19,
+ EAMD3D=1<<20,
+ };
+
+ char *name;
+ u32 fcr_set=0;
+ u32 fcr_clr=0;
+ u32 lo,hi,newlo;
+ u32 aa,bb,cc,dd;
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ switch (c->x86) {
+
+ case 5:
+ switch(c->x86_model) {
+ case 4:
+ name="C6";
+ fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+ fcr_clr=DPDC;
+ printk(KERN_NOTICE "Disabling bugged TSC.\n");
+ clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#ifdef CONFIG_X86_OOSTORE
+ centaur_create_optimal_mcr();
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+
+ The C6 original lacks weak read order
+
+ Note 0x120 is write only on Winchip 1 */
+
+ wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif
+ break;
+ case 8:
+ switch(c->x86_mask) {
+ default:
+ name="2";
+ break;
+ case 7 ... 9:
+ name="2A";
+ break;
+ case 10 ... 15:
+ name="2B";
+ break;
+ }
+ fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+ fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+ */
+ lo|=31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
+ break;
+ case 9:
+ name="3";
+ fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+ fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+ */
+ lo|=31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
+ break;
+ case 10:
+ name="4";
+ /* no info on the WC4 yet */
+ break;
+ default:
+ name="??";
+ }
+
+ rdmsr(MSR_IDT_FCR1, lo, hi);
+ newlo=(lo|fcr_set) & (~fcr_clr);
+
+ if (newlo!=lo) {
+ printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
+ wrmsr(MSR_IDT_FCR1, newlo, hi );
+ } else {
+ printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+ }
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+ /* Report CX8 */
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+ /* Set 3DNow! on Winchip 2 and above. */
+ if (c->x86_model >=8)
+ set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+ /* See if we can find out some more. */
+ if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+ /* Yes, we can. */
+ cpuid(0x80000005,&aa,&bb,&cc,&dd);
+ /* Add L1 data and code cache sizes. */
+ c->x86_cache_size = (cc>>24)+(dd>>24);
+ }
+ sprintf( c->x86_model_id, "WinChip %s", name );
+ break;
+
+ case 6:
+ init_c3(c);
+ break;
+ }
+}
+
+static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* VIA C3 CPUs (670-68F) need further shifting. */
+ if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
+ size >>= 8;
+
+ /* VIA also screwed up Nehemiah stepping 1, and made
+ it return '65KB' instead of '64KB'
+ - Note, it seems this may only be in engineering samples. */
+ if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
+ size -=1;
+
+ return size;
+}
+
+static struct cpu_dev centaur_cpu_dev __initdata = {
+ .c_vendor = "Centaur",
+ .c_ident = { "CentaurHauls" },
+ .c_init = init_centaur,
+ .c_size_cache = centaur_size_cache,
+};
+
+int __init centaur_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CENTAUR] = ¢aur_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(centaur_init_cpu);
diff --git a/arch/i386/kernel/cpu/changelog b/arch/i386/kernel/cpu/changelog
new file mode 100644
index 0000000..cef76b8
--- /dev/null
+++ b/arch/i386/kernel/cpu/changelog
@@ -0,0 +1,63 @@
+/*
+ * Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
+ * and Martin Mares, November 1997.
+ *
+ * Force Cyrix 6x86(MX) and M II processors to report MTRR capability
+ * and Cyrix "coma bug" recognition by
+ * Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999.
+ *
+ * Force Centaur C6 processors to report MTRR capability.
+ * Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
+ *
+ * Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
+ *
+ * IDT Winchip tweaks, misc clean ups.
+ * Dave Jones <davej@suse.de>, August 1999
+ *
+ * Better detection of Centaur/IDT WinChip models.
+ * Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
+ *
+ * Cleaned up cache-detection code
+ * Dave Jones <davej@suse.de>, October 1999
+ *
+ * Added proper L2 cache detection for Coppermine
+ * Dragan Stancevic <visitor@valinux.com>, October 1999
+ *
+ * Added the original array for capability flags but forgot to credit
+ * myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
+ * Jauder Ho <jauderho@carumba.com>, January 2000
+ *
+ * Detection for Celeron coppermine, identify_cpu() overhauled,
+ * and a few other clean ups.
+ * Dave Jones <davej@suse.de>, April 2000
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Added proper Cascades CPU and L2 cache detection for Cascades
+ * and 8-way type cache happy bunch from Intel:^)
+ * Dragan Stancevic <visitor@valinux.com>, May 2000
+ *
+ * Forward port AMD Duron errata T13 from 2.2.17pre
+ * Dave Jones <davej@suse.de>, August 2000
+ *
+ * Forward port lots of fixes/improvements from 2.2.18pre
+ * Cyrix III, Pentium IV support.
+ * Dave Jones <davej@suse.de>, October 2000
+ *
+ * Massive cleanup of CPU detection and bug handling;
+ * Transmeta CPU detection,
+ * H. Peter Anvin <hpa@zytor.com>, November 2000
+ *
+ * VIA C3 Support.
+ * Dave Jones <davej@suse.de>, March 2001
+ *
+ * AMD Athlon/Duron/Thunderbird bluesmoke support.
+ * Dave Jones <davej@suse.de>, April 2001.
+ *
+ * CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
+ * Dave Jones <davej@suse.de>, September, October 2001.
+ *
+ */
+
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
new file mode 100644
index 0000000..ebd5d82
--- /dev/null
+++ b/arch/i386/kernel/cpu/common.c
@@ -0,0 +1,634 @@
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+#include "cpu.h"
+
+DEFINE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_table);
+
+DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
+EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
+
+static int cachesize_override __initdata = -1;
+static int disable_x86_fxsr __initdata = 0;
+static int disable_x86_serial_nr __initdata = 1;
+
+struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+
+extern int disable_pse;
+
+static void default_init(struct cpuinfo_x86 * c)
+{
+ /* Not much we can do here... */
+ /* Check if at least it has cpuid */
+ if (c->cpuid_level == -1) {
+ /* No cpuid. It must be an ancient CPU */
+ if (c->x86 == 4)
+ strcpy(c->x86_model_id, "486");
+ else if (c->x86 == 3)
+ strcpy(c->x86_model_id, "386");
+ }
+}
+
+static struct cpu_dev default_cpu = {
+ .c_init = default_init,
+};
+static struct cpu_dev * this_cpu = &default_cpu;
+
+static int __init cachesize_setup(char *str)
+{
+ get_option (&str, &cachesize_override);
+ return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+int __init get_model_name(struct cpuinfo_x86 *c)
+{
+ unsigned int *v;
+ char *p, *q;
+
+ if (cpuid_eax(0x80000000) < 0x80000004)
+ return 0;
+
+ v = (unsigned int *) c->x86_model_id;
+ cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+ cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+ cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+ c->x86_model_id[48] = 0;
+
+ /* Intel chips right-justify this string for some dumb reason;
+ undo that brain damage */
+ p = q = &c->x86_model_id[0];
+ while ( *p == ' ' )
+ p++;
+ if ( p != q ) {
+ while ( *p )
+ *q++ = *p++;
+ while ( q <= &c->x86_model_id[48] )
+ *q++ = '\0'; /* Zero-pad the rest */
+ }
+
+ return 1;
+}
+
+
+void __init display_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int n, dummy, ecx, edx, l2size;
+
+ n = cpuid_eax(0x80000000);
+
+ if (n >= 0x80000005) {
+ cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+ printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
+ edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+ c->x86_cache_size=(ecx>>24)+(edx>>24);
+ }
+
+ if (n < 0x80000006) /* Some chips just has a large L1. */
+ return;
+
+ ecx = cpuid_ecx(0x80000006);
+ l2size = ecx >> 16;
+
+ /* do processor-specific cache resizing */
+ if (this_cpu->c_size_cache)
+ l2size = this_cpu->c_size_cache(c,l2size);
+
+ /* Allow user to override all this if necessary. */
+ if (cachesize_override != -1)
+ l2size = cachesize_override;
+
+ if ( l2size == 0 )
+ return; /* Again, no L2 cache is possible */
+
+ c->x86_cache_size = l2size;
+
+ printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+ l2size, ecx & 0xFF);
+}
+
+/* Naming convention should be: <Name> [(<Codename>)] */
+/* This table only is used unless init_<vendor>() below doesn't set it; */
+/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+
+/* Look up CPU names by table lookup. */
+static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+{
+ struct cpu_model_info *info;
+
+ if ( c->x86_model >= 16 )
+ return NULL; /* Range check */
+
+ if (!this_cpu)
+ return NULL;
+
+ info = this_cpu->c_models;
+
+ while (info && info->family) {
+ if (info->family == c->x86)
+ return info->model_names[c->x86_model];
+ info++;
+ }
+ return NULL; /* Not found */
+}
+
+
+void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+{
+ char *v = c->x86_vendor_id;
+ int i;
+
+ for (i = 0; i < X86_VENDOR_NUM; i++) {
+ if (cpu_devs[i]) {
+ if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
+ (cpu_devs[i]->c_ident[1] &&
+ !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+ c->x86_vendor = i;
+ if (!early)
+ this_cpu = cpu_devs[i];
+ break;
+ }
+ }
+ }
+}
+
+
+static int __init x86_fxsr_setup(char * s)
+{
+ disable_x86_fxsr = 1;
+ return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+ u32 f1, f2;
+
+ asm("pushfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "movl %0,%1\n\t"
+ "xorl %2,%0\n\t"
+ "pushl %0\n\t"
+ "popfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "popfl\n\t"
+ : "=&r" (f1), "=&r" (f2)
+ : "ir" (flag));
+
+ return ((f1^f2) & flag) != 0;
+}
+
+
+/* Probe for the CPUID instruction */
+static int __init have_cpuid_p(void)
+{
+ return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+/* Do minimum CPU detection early.
+ Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
+ The others are not touched to avoid unwanted side effects. */
+static void __init early_cpu_detect(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ c->x86_cache_alignment = 32;
+
+ if (!have_cpuid_p())
+ return;
+
+ /* Get vendor name */
+ cpuid(0x00000000, &c->cpuid_level,
+ (int *)&c->x86_vendor_id[0],
+ (int *)&c->x86_vendor_id[8],
+ (int *)&c->x86_vendor_id[4]);
+
+ get_cpu_vendor(c, 1);
+
+ c->x86 = 4;
+ if (c->cpuid_level >= 0x00000001) {
+ u32 junk, tfms, cap0, misc;
+ cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
+ c->x86 = (tfms >> 8) & 15;
+ c->x86_model = (tfms >> 4) & 15;
+ if (c->x86 == 0xf) {
+ c->x86 += (tfms >> 20) & 0xff;
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+ }
+ c->x86_mask = tfms & 15;
+ if (cap0 & (1<<19))
+ c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
+ }
+
+ early_intel_workaround(c);
+}
+
+void __init generic_identify(struct cpuinfo_x86 * c)
+{
+ u32 tfms, xlvl;
+ int junk;
+
+ if (have_cpuid_p()) {
+ /* Get vendor name */
+ cpuid(0x00000000, &c->cpuid_level,
+ (int *)&c->x86_vendor_id[0],
+ (int *)&c->x86_vendor_id[8],
+ (int *)&c->x86_vendor_id[4]);
+
+ get_cpu_vendor(c, 0);
+ /* Initialize the standard set of capabilities */
+ /* Note that the vendor-specific code below might override */
+
+ /* Intel-defined flags: level 0x00000001 */
+ if ( c->cpuid_level >= 0x00000001 ) {
+ u32 capability, excap;
+ cpuid(0x00000001, &tfms, &junk, &excap, &capability);
+ c->x86_capability[0] = capability;
+ c->x86_capability[4] = excap;
+ c->x86 = (tfms >> 8) & 15;
+ c->x86_model = (tfms >> 4) & 15;
+ if (c->x86 == 0xf) {
+ c->x86 += (tfms >> 20) & 0xff;
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+ }
+ c->x86_mask = tfms & 15;
+ } else {
+ /* Have CPUID level 0 only - unheard of */
+ c->x86 = 4;
+ }
+
+ /* AMD-defined flags: level 0x80000001 */
+ xlvl = cpuid_eax(0x80000000);
+ if ( (xlvl & 0xffff0000) == 0x80000000 ) {
+ if ( xlvl >= 0x80000001 ) {
+ c->x86_capability[1] = cpuid_edx(0x80000001);
+ c->x86_capability[6] = cpuid_ecx(0x80000001);
+ }
+ if ( xlvl >= 0x80000004 )
+ get_model_name(c); /* Default name */
+ }
+ }
+}
+
+static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+ /* Disable processor serial number */
+ unsigned long lo,hi;
+ rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ lo |= 0x200000;
+ wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ printk(KERN_NOTICE "CPU serial number disabled.\n");
+ clear_bit(X86_FEATURE_PN, c->x86_capability);
+
+ /* Disabling the serial number may affect the cpuid level */
+ c->cpuid_level = cpuid_eax(0);
+ }
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+ disable_x86_serial_nr = 0;
+ return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+
+
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
+{
+ int i;
+
+ c->loops_per_jiffy = loops_per_jiffy;
+ c->x86_cache_size = -1;
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+ c->cpuid_level = -1; /* CPUID not detected */
+ c->x86_model = c->x86_mask = 0; /* So far unknown... */
+ c->x86_vendor_id[0] = '\0'; /* Unset */
+ c->x86_model_id[0] = '\0'; /* Unset */
+ c->x86_num_cores = 1;
+ memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+ if (!have_cpuid_p()) {
+ /* First of all, decide if this is a 486 or higher */
+ /* It's a 486 if we can modify the AC flag */
+ if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+ c->x86 = 4;
+ else
+ c->x86 = 3;
+ }
+
+ generic_identify(c);
+
+ printk(KERN_DEBUG "CPU: After generic identify, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+
+ if (this_cpu->c_identify) {
+ this_cpu->c_identify(c);
+
+ printk(KERN_DEBUG "CPU: After vendor identify, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+ }
+
+ /*
+ * Vendor-specific initialization. In this section we
+ * canonicalize the feature flags, meaning if there are
+ * features a certain CPU supports which CPUID doesn't
+ * tell us, CPUID claiming incorrect flags, or other bugs,
+ * we handle them here.
+ *
+ * At the end of this section, c->x86_capability better
+ * indicate the features this CPU genuinely supports!
+ */
+ if (this_cpu->c_init)
+ this_cpu->c_init(c);
+
+ /* Disable the PN if appropriate */
+ squash_the_stupid_serial_number(c);
+
+ /*
+ * The vendor-specific functions might have changed features. Now
+ * we do "generic changes."
+ */
+
+ /* TSC disabled? */
+ if ( tsc_disable )
+ clear_bit(X86_FEATURE_TSC, c->x86_capability);
+
+ /* FXSR disabled? */
+ if (disable_x86_fxsr) {
+ clear_bit(X86_FEATURE_FXSR, c->x86_capability);
+ clear_bit(X86_FEATURE_XMM, c->x86_capability);
+ }
+
+ if (disable_pse)
+ clear_bit(X86_FEATURE_PSE, c->x86_capability);
+
+ /* If the model name is still unset, do table lookup. */
+ if ( !c->x86_model_id[0] ) {
+ char *p;
+ p = table_lookup_model(c);
+ if ( p )
+ strcpy(c->x86_model_id, p);
+ else
+ /* Last resort... */
+ sprintf(c->x86_model_id, "%02x/%02x",
+ c->x86_vendor, c->x86_model);
+ }
+
+ /* Now the feature flags better reflect actual CPU features! */
+
+ printk(KERN_DEBUG "CPU: After all inits, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+
+ /*
+ * On SMP, boot_cpu_data holds the common feature set between
+ * all CPUs; so make sure that we indicate which features are
+ * common between the CPUs. The first time this routine gets
+ * executed, c == &boot_cpu_data.
+ */
+ if ( c != &boot_cpu_data ) {
+ /* AND the already accumulated flags with these */
+ for ( i = 0 ; i < NCAPINTS ; i++ )
+ boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+ }
+
+ /* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
+ mcheck_init(c);
+#endif
+}
+
+#ifdef CONFIG_X86_HT
+void __init detect_ht(struct cpuinfo_x86 *c)
+{
+ u32 eax, ebx, ecx, edx;
+ int index_lsb, index_msb, tmp;
+ int cpu = smp_processor_id();
+
+ if (!cpu_has(c, X86_FEATURE_HT))
+ return;
+
+ cpuid(1, &eax, &ebx, &ecx, &edx);
+ smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+ if (smp_num_siblings == 1) {
+ printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ } else if (smp_num_siblings > 1 ) {
+ index_lsb = 0;
+ index_msb = 31;
+
+ if (smp_num_siblings > NR_CPUS) {
+ printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+ smp_num_siblings = 1;
+ return;
+ }
+ tmp = smp_num_siblings;
+ while ((tmp & 1) == 0) {
+ tmp >>=1 ;
+ index_lsb++;
+ }
+ tmp = smp_num_siblings;
+ while ((tmp & 0x80000000 ) == 0) {
+ tmp <<=1 ;
+ index_msb--;
+ }
+ if (index_lsb != index_msb )
+ index_msb++;
+ phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ phys_proc_id[cpu]);
+ }
+}
+#endif
+
+void __init print_cpu_info(struct cpuinfo_x86 *c)
+{
+ char *vendor = NULL;
+
+ if (c->x86_vendor < X86_VENDOR_NUM)
+ vendor = this_cpu->c_vendor;
+ else if (c->cpuid_level >= 0)
+ vendor = c->x86_vendor_id;
+
+ if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
+ printk("%s ", vendor);
+
+ if (!c->x86_model_id[0])
+ printk("%d86", c->x86);
+ else
+ printk("%s", c->x86_model_id);
+
+ if (c->x86_mask || c->cpuid_level >= 0)
+ printk(" stepping %02x\n", c->x86_mask);
+ else
+ printk("\n");
+}
+
+cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+
+/* This is hacky. :)
+ * We're emulating future behavior.
+ * In the future, the cpu-specific init functions will be called implicitly
+ * via the magic of initcalls.
+ * They will insert themselves into the cpu_devs structure.
+ * Then, when cpu_init() is called, we can just iterate over that array.
+ */
+
+extern int intel_cpu_init(void);
+extern int cyrix_init_cpu(void);
+extern int nsc_init_cpu(void);
+extern int amd_init_cpu(void);
+extern int centaur_init_cpu(void);
+extern int transmeta_init_cpu(void);
+extern int rise_init_cpu(void);
+extern int nexgen_init_cpu(void);
+extern int umc_init_cpu(void);
+
+void __init early_cpu_init(void)
+{
+ intel_cpu_init();
+ cyrix_init_cpu();
+ nsc_init_cpu();
+ amd_init_cpu();
+ centaur_init_cpu();
+ transmeta_init_cpu();
+ rise_init_cpu();
+ nexgen_init_cpu();
+ umc_init_cpu();
+ early_cpu_detect();
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ /* pse is not compatible with on-the-fly unmapping,
+ * disable it even if the cpus claim to support it.
+ */
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+#endif
+}
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+void __init cpu_init (void)
+{
+ int cpu = smp_processor_id();
+ struct tss_struct * t = &per_cpu(init_tss, cpu);
+ struct thread_struct *thread = ¤t->thread;
+ __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+
+ if (cpu_test_and_set(cpu, cpu_initialized)) {
+ printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
+ for (;;) local_irq_enable();
+ }
+ printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+ if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
+ clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+ if (tsc_disable && cpu_has_tsc) {
+ printk(KERN_NOTICE "Disabling TSC...\n");
+ /**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
+ clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
+ set_in_cr4(X86_CR4_TSD);
+ }
+
+ /*
+ * Initialize the per-CPU GDT with the boot GDT,
+ * and set up the GDT descriptor:
+ */
+ memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
+ GDT_SIZE);
+
+ /* Set up GDT entry for 16bit stack */
+ *(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+ ((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
+ ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
+ (CPU_16BIT_STACK_SIZE - 1);
+
+ cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
+ cpu_gdt_descr[cpu].address =
+ (unsigned long)&per_cpu(cpu_gdt_table, cpu);
+
+ /*
+ * Set up the per-thread TLS descriptor cache:
+ */
+ memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
+ GDT_ENTRY_TLS_ENTRIES * 8);
+
+ __asm__ __volatile__("lgdt %0" : : "m" (cpu_gdt_descr[cpu]));
+ __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+
+ /*
+ * Delete NT
+ */
+ __asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");
+
+ /*
+ * Set up and load the per-CPU TSS and LDT
+ */
+ atomic_inc(&init_mm.mm_count);
+ current->active_mm = &init_mm;
+ if (current->mm)
+ BUG();
+ enter_lazy_tlb(&init_mm, current);
+
+ load_esp0(t, thread);
+ set_tss_desc(cpu,t);
+ load_TR_desc();
+ load_LDT(&init_mm.context);
+
+ /* Set up doublefault TSS pointer in the GDT */
+ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
+
+ /* Clear %fs and %gs. */
+ asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
+
+ /* Clear all 6 debug registers: */
+
+#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );
+
+ CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
+
+#undef CD
+
+ /*
+ * Force FPU initialization:
+ */
+ current_thread_info()->status = 0;
+ clear_used_math();
+ mxcsr_feature_mask_init();
+}
diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/i386/kernel/cpu/cpu.h
new file mode 100644
index 0000000..5a1d4f1
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpu.h
@@ -0,0 +1,30 @@
+
+struct cpu_model_info {
+ int vendor;
+ int family;
+ char *model_names[16];
+};
+
+/* attempt to consolidate cpu attributes */
+struct cpu_dev {
+ char * c_vendor;
+
+ /* some have two possibilities for cpuid string */
+ char * c_ident[2];
+
+ struct cpu_model_info c_models[4];
+
+ void (*c_init)(struct cpuinfo_x86 * c);
+ void (*c_identify)(struct cpuinfo_x86 * c);
+ unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+};
+
+extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+
+extern int get_model_name(struct cpuinfo_x86 *c);
+extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+extern void generic_identify(struct cpuinfo_x86 * c);
+
+extern void early_intel_workaround(struct cpuinfo_x86 *c);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
new file mode 100644
index 0000000..f25ffd7
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -0,0 +1,231 @@
+#
+# CPU Frequency scaling
+#
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config X86_ACPI_CPUFREQ
+ tristate "ACPI Processor P-States driver"
+ select CPU_FREQ_TABLE
+ depends on ACPI_PROCESSOR
+ help
+ This driver adds a CPUFreq driver which utilizes the ACPI
+ Processor Performance States.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config ELAN_CPUFREQ
+ tristate "AMD Elan"
+ select CPU_FREQ_TABLE
+ depends on X86_ELAN
+ ---help---
+ This adds the CPUFreq driver for AMD Elan SC400 and SC410
+ processors.
+
+ You need to specify the processor maximum speed as boot
+ parameter: elanfreq=maxspeed (in kHz) or as module
+ parameter "max_freq".
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_POWERNOW_K6
+ tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+ AMD K6-3+ processors.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_POWERNOW_K7
+ tristate "AMD Mobile Athlon/Duron PowerNow!"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+ bool
+ depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+ depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+ default y
+
+config X86_POWERNOW_K8
+ tristate "AMD Opteron/Athlon64 PowerNow!"
+ select CPU_FREQ_TABLE
+ depends on EXPERIMENTAL
+ help
+ This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_POWERNOW_K8_ACPI
+ bool
+ depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+ depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+ default y
+
+config X86_GX_SUSPMOD
+ tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+ help
+ This add the CPUFreq driver for NatSemi Geode processors which
+ support suspend modulation.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+ tristate "Intel Enhanced SpeedStep"
+ select CPU_FREQ_TABLE
+ select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+ help
+ This adds the CPUFreq driver for Enhanced SpeedStep enabled
+ mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However,
+ you also need to say Y to "Use ACPI tables to decode..." below
+ [which might imply enabling ACPI] if you want to use this driver
+ on non-Banias CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_ACPI
+ bool "Use ACPI tables to decode valid frequency/voltage pairs"
+ depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
+ depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
+ default y
+ help
+ Use primarily the information provided in the BIOS ACPI tables
+ to determine valid CPU frequency and voltage pairings. It is
+ required for the driver to work on non-Banias CPUs.
+
+ If in doubt, say Y.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+ bool "Built-in tables for Banias CPUs"
+ depends on X86_SPEEDSTEP_CENTRINO
+ default y
+ help
+ Use built-in tables for Banias CPUs if ACPI encoding
+ is not available.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+ tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for certain mobile Intel Pentium III
+ (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+ mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2,
+ ICH3 or ICH4 southbridge.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+ tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+ select CPU_FREQ_TABLE
+ depends on EXPERIMENTAL
+ help
+ This adds the CPUFreq driver for certain mobile Intel Pentium III
+ (Coppermine), all mobile Intel Pentium III-M (Tualatin)
+ on systems which have an Intel 440BX/ZX/MX southbridge.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+ tristate "Intel Pentium 4 clock modulation"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for Intel Pentium 4 / XEON
+ processors.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_CPUFREQ_NFORCE2
+ tristate "nVidia nForce2 FSB changing"
+ depends on EXPERIMENTAL
+ help
+ This adds the CPUFreq driver for FSB changing on nVidia nForce2
+ platforms.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_LONGRUN
+ tristate "Transmeta LongRun"
+ help
+ This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+ which support LongRun.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config X86_LONGHAUL
+ tristate "VIA Cyrix III Longhaul"
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for VIA Samuel/CyrixIII,
+ VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
+ processors.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+comment "shared options"
+
+config X86_ACPI_CPUFREQ_PROC_INTF
+ bool "/proc/acpi/processor/../performance interface (deprecated)"
+ depends on PROC_FS
+ depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+ help
+ This enables the deprecated /proc/acpi/processor/../performance
+ interface. While it is helpful for debugging, the generic,
+ cross-architecture cpufreq interfaces should be used.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP_LIB
+ tristate
+ default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+ bool "Relaxed speedstep capability checks"
+ depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+ help
+ Don't perform all checks for a speedstep capable system which would
+ normally be done. Some ancient or strange systems, though speedstep
+ capable, don't always indicate that they are speedstep capable. This
+ option lets the probing code bypass some of those checks if the
+ parameter "relaxed_check=1" is passed to the module.
+
+endif # CPU_FREQ
+
+endmenu
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
new file mode 100644
index 0000000..a922e97
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
+obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
+obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
+obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
+obj-$(CONFIG_X86_LONGRUN) += longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
new file mode 100644
index 0000000..963e17a
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -0,0 +1,537 @@
+/*
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ *
+ * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+#include "speedstep-est-common.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+
+MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+
+struct cpufreq_acpi_io {
+ struct acpi_processor_performance acpi_data;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int resume;
+};
+
+static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS];
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+static int
+acpi_processor_write_port(
+ u16 port,
+ u8 bit_width,
+ u32 value)
+{
+ if (bit_width <= 8) {
+ outb(value, port);
+ } else if (bit_width <= 16) {
+ outw(value, port);
+ } else if (bit_width <= 32) {
+ outl(value, port);
+ } else {
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int
+acpi_processor_read_port(
+ u16 port,
+ u8 bit_width,
+ u32 *ret)
+{
+ *ret = 0;
+ if (bit_width <= 8) {
+ *ret = inb(port);
+ } else if (bit_width <= 16) {
+ *ret = inw(port);
+ } else if (bit_width <= 32) {
+ *ret = inl(port);
+ } else {
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int
+acpi_processor_set_performance (
+ struct cpufreq_acpi_io *data,
+ unsigned int cpu,
+ int state)
+{
+ u16 port = 0;
+ u8 bit_width = 0;
+ int ret = 0;
+ u32 value = 0;
+ int i = 0;
+ struct cpufreq_freqs cpufreq_freqs;
+ cpumask_t saved_mask;
+ int retval;
+
+ dprintk("acpi_processor_set_performance\n");
+
+ /*
+ * TBD: Use something other than set_cpus_allowed.
+ * As set_cpus_allowed is a bit racy,
+ * with any other set_cpus_allowed for this process.
+ */
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (smp_processor_id() != cpu) {
+ return (-EAGAIN);
+ }
+
+ if (state == data->acpi_data.state) {
+ if (unlikely(data->resume)) {
+ dprintk("Called after resume, resetting to P%d\n", state);
+ data->resume = 0;
+ } else {
+ dprintk("Already at target state (P%d)\n", state);
+ retval = 0;
+ goto migrate_end;
+ }
+ }
+
+ dprintk("Transitioning from P%d to P%d\n",
+ data->acpi_data.state, state);
+
+ /* cpufreq frequency struct */
+ cpufreq_freqs.cpu = cpu;
+ cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
+ cpufreq_freqs.new = data->freq_table[state].frequency;
+
+ /* notify cpufreq */
+ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+
+ /*
+ * First we write the target state's 'control' value to the
+ * control_register.
+ */
+
+ port = data->acpi_data.control_register.address;
+ bit_width = data->acpi_data.control_register.bit_width;
+ value = (u32) data->acpi_data.states[state].control;
+
+ dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
+
+ ret = acpi_processor_write_port(port, bit_width, value);
+ if (ret) {
+ dprintk("Invalid port width 0x%04x\n", bit_width);
+ retval = ret;
+ goto migrate_end;
+ }
+
+ /*
+ * Then we read the 'status_register' and compare the value with the
+ * target state's 'status' to make sure the transition was successful.
+ * Note that we'll poll for up to 1ms (100 cycles of 10us) before
+ * giving up.
+ */
+
+ port = data->acpi_data.status_register.address;
+ bit_width = data->acpi_data.status_register.bit_width;
+
+ dprintk("Looking for 0x%08x from port 0x%04x\n",
+ (u32) data->acpi_data.states[state].status, port);
+
+ for (i=0; i<100; i++) {
+ ret = acpi_processor_read_port(port, bit_width, &value);
+ if (ret) {
+ dprintk("Invalid port width 0x%04x\n", bit_width);
+ retval = ret;
+ goto migrate_end;
+ }
+ if (value == (u32) data->acpi_data.states[state].status)
+ break;
+ udelay(10);
+ }
+
+ /* notify cpufreq */
+ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+
+ if (value != (u32) data->acpi_data.states[state].status) {
+ unsigned int tmp = cpufreq_freqs.new;
+ cpufreq_freqs.new = cpufreq_freqs.old;
+ cpufreq_freqs.old = tmp;
+ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+ printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
+ retval = -ENODEV;
+ goto migrate_end;
+ }
+
+ dprintk("Transition successful after %d microseconds\n", i * 10);
+
+ data->acpi_data.state = state;
+
+ retval = 0;
+migrate_end:
+ set_cpus_allowed(current, saved_mask);
+ return (retval);
+}
+
+
+static int
+acpi_cpufreq_target (
+ struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ unsigned int next_state = 0;
+ unsigned int result = 0;
+
+ dprintk("acpi_cpufreq_setpolicy\n");
+
+ result = cpufreq_frequency_table_target(policy,
+ data->freq_table,
+ target_freq,
+ relation,
+ &next_state);
+ if (result)
+ return (result);
+
+ result = acpi_processor_set_performance (data, policy->cpu, next_state);
+
+ return (result);
+}
+
+
+static int
+acpi_cpufreq_verify (
+ struct cpufreq_policy *policy)
+{
+ unsigned int result = 0;
+ struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+ dprintk("acpi_cpufreq_verify\n");
+
+ result = cpufreq_frequency_table_verify(policy,
+ data->freq_table);
+
+ return (result);
+}
+
+
+static unsigned long
+acpi_cpufreq_guess_freq (
+ struct cpufreq_acpi_io *data,
+ unsigned int cpu)
+{
+ if (cpu_khz) {
+ /* search the closest match to cpu_khz */
+ unsigned int i;
+ unsigned long freq;
+ unsigned long freqn = data->acpi_data.states[0].core_frequency * 1000;
+
+ for (i=0; i < (data->acpi_data.state_count - 1); i++) {
+ freq = freqn;
+ freqn = data->acpi_data.states[i+1].core_frequency * 1000;
+ if ((2 * cpu_khz) > (freqn + freq)) {
+ data->acpi_data.state = i;
+ return (freq);
+ }
+ }
+ data->acpi_data.state = data->acpi_data.state_count - 1;
+ return (freqn);
+ } else
+ /* assume CPU is at P0... */
+ data->acpi_data.state = 0;
+ return data->acpi_data.states[0].core_frequency * 1000;
+
+}
+
+
+/*
+ * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
+ * of this driver
+ * @perf: processor-specific acpi_io_data struct
+ * @cpu: CPU being initialized
+ *
+ * To avoid issues with legacy OSes, some BIOSes require to be informed of
+ * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
+ * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
+ * driver/acpi/processor.c
+ */
+static void
+acpi_processor_cpu_init_pdc_est(
+ struct acpi_processor_performance *perf,
+ unsigned int cpu,
+ struct acpi_object_list *obj_list
+ )
+{
+ union acpi_object *obj;
+ u32 *buf;
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+ dprintk("acpi_processor_cpu_init_pdc_est\n");
+
+ if (!cpu_has(c, X86_FEATURE_EST))
+ return;
+
+ /* Initialize pdc. It will be used later. */
+ if (!obj_list)
+ return;
+
+ if (!(obj_list->count && obj_list->pointer))
+ return;
+
+ obj = obj_list->pointer;
+ if ((obj->buffer.length == 12) && obj->buffer.pointer) {
+ buf = (u32 *)obj->buffer.pointer;
+ buf[0] = ACPI_PDC_REVISION_ID;
+ buf[1] = 1;
+ buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+ perf->pdc = obj_list;
+ }
+ return;
+}
+
+
+/* CPU specific PDC initialization */
+static void
+acpi_processor_cpu_init_pdc(
+ struct acpi_processor_performance *perf,
+ unsigned int cpu,
+ struct acpi_object_list *obj_list
+ )
+{
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+ dprintk("acpi_processor_cpu_init_pdc\n");
+ perf->pdc = NULL;
+ if (cpu_has(c, X86_FEATURE_EST))
+ acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
+ return;
+}
+
+
+static int
+acpi_cpufreq_cpu_init (
+ struct cpufreq_policy *policy)
+{
+ unsigned int i;
+ unsigned int cpu = policy->cpu;
+ struct cpufreq_acpi_io *data;
+ unsigned int result = 0;
+
+ union acpi_object arg0 = {ACPI_TYPE_BUFFER};
+ u32 arg0_buf[3];
+ struct acpi_object_list arg_list = {1, &arg0};
+
+ dprintk("acpi_cpufreq_cpu_init\n");
+ /* setup arg_list for _PDC settings */
+ arg0.buffer.length = 12;
+ arg0.buffer.pointer = (u8 *) arg0_buf;
+
+ data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+ if (!data)
+ return (-ENOMEM);
+ memset(data, 0, sizeof(struct cpufreq_acpi_io));
+
+ acpi_io_data[cpu] = data;
+
+ acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
+ result = acpi_processor_register_performance(&data->acpi_data, cpu);
+ data->acpi_data.pdc = NULL;
+
+ if (result)
+ goto err_free;
+
+ if (is_const_loops_cpu(cpu)) {
+ acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+ }
+
+ /* capability check */
+ if (data->acpi_data.state_count <= 1) {
+ dprintk("No P-States\n");
+ result = -ENODEV;
+ goto err_unreg;
+ }
+ if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
+ (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+ dprintk("Unsupported address space [%d, %d]\n",
+ (u32) (data->acpi_data.control_register.space_id),
+ (u32) (data->acpi_data.status_register.space_id));
+ result = -ENODEV;
+ goto err_unreg;
+ }
+
+ /* alloc freq_table */
+ data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (data->acpi_data.state_count + 1), GFP_KERNEL);
+ if (!data->freq_table) {
+ result = -ENOMEM;
+ goto err_unreg;
+ }
+
+ /* detect transition latency */
+ policy->cpuinfo.transition_latency = 0;
+ for (i=0; i<data->acpi_data.state_count; i++) {
+ if ((data->acpi_data.states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
+ policy->cpuinfo.transition_latency = data->acpi_data.states[i].transition_latency * 1000;
+ }
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* The current speed is unknown and not detectable by ACPI... */
+ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+
+ /* table init */
+ for (i=0; i<=data->acpi_data.state_count; i++)
+ {
+ data->freq_table[i].index = i;
+ if (i<data->acpi_data.state_count)
+ data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+ else
+ data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+ }
+
+ result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+ if (result) {
+ goto err_freqfree;
+ }
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
+ cpu);
+ for (i = 0; i < data->acpi_data.state_count; i++)
+ dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
+ (i == data->acpi_data.state?'*':' '), i,
+ (u32) data->acpi_data.states[i].core_frequency,
+ (u32) data->acpi_data.states[i].power,
+ (u32) data->acpi_data.states[i].transition_latency);
+
+ cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+ return (result);
+
+ err_freqfree:
+ kfree(data->freq_table);
+ err_unreg:
+ acpi_processor_unregister_performance(&data->acpi_data, cpu);
+ err_free:
+ kfree(data);
+ acpi_io_data[cpu] = NULL;
+
+ return (result);
+}
+
+
+static int
+acpi_cpufreq_cpu_exit (
+ struct cpufreq_policy *policy)
+{
+ struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+ dprintk("acpi_cpufreq_cpu_exit\n");
+
+ if (data) {
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ acpi_io_data[policy->cpu] = NULL;
+ acpi_processor_unregister_performance(&data->acpi_data, policy->cpu);
+ kfree(data);
+ }
+
+ return (0);
+}
+
+static int
+acpi_cpufreq_resume (
+ struct cpufreq_policy *policy)
+{
+ struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+ dprintk("acpi_cpufreq_resume\n");
+
+ data->resume = 1;
+
+ return (0);
+}
+
+
+static struct freq_attr* acpi_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+ .verify = acpi_cpufreq_verify,
+ .target = acpi_cpufreq_target,
+ .init = acpi_cpufreq_cpu_init,
+ .exit = acpi_cpufreq_cpu_exit,
+ .resume = acpi_cpufreq_resume,
+ .name = "acpi-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = acpi_cpufreq_attr,
+};
+
+
+static int __init
+acpi_cpufreq_init (void)
+{
+ int result = 0;
+
+ dprintk("acpi_cpufreq_init\n");
+
+ result = cpufreq_register_driver(&acpi_cpufreq_driver);
+
+ return (result);
+}
+
+
+static void __exit
+acpi_cpufreq_exit (void)
+{
+ dprintk("acpi_cpufreq_exit\n");
+
+ cpufreq_unregister_driver(&acpi_cpufreq_driver);
+
+ return;
+}
+
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
+MODULE_ALIAS("acpi");
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
new file mode 100644
index 0000000..04a4053
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -0,0 +1,457 @@
+/*
+ * (C) 2004 Sebastian Witt <se.witt@gmx.net>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon reverse engineered information
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#define NFORCE2_XTAL 25
+#define NFORCE2_BOOTFSB 0x48
+#define NFORCE2_PLLENABLE 0xa8
+#define NFORCE2_PLLREG 0xa4
+#define NFORCE2_PLLADR 0xa0
+#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
+
+#define NFORCE2_MIN_FSB 50
+#define NFORCE2_SAFE_DISTANCE 50
+
+/* Delay in ms between FSB changes */
+//#define NFORCE2_DELAY 10
+
+/* nforce2_chipset:
+ * FSB is changed using the chipset
+ */
+static struct pci_dev *nforce2_chipset_dev;
+
+/* fid:
+ * multiplier * 10
+ */
+static int fid = 0;
+
+/* min_fsb, max_fsb:
+ * minimum and maximum FSB (= FSB at boot time)
+ */
+static int min_fsb = 0;
+static int max_fsb = 0;
+
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
+MODULE_LICENSE("GPL");
+
+module_param(fid, int, 0444);
+module_param(min_fsb, int, 0444);
+
+MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
+MODULE_PARM_DESC(min_fsb,
+ "Minimum FSB to use, if not defined: current FSB - 50");
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
+
+/*
+ * nforce2_calc_fsb - calculate FSB
+ * @pll: PLL value
+ *
+ * Calculates FSB from PLL value
+ */
+static int nforce2_calc_fsb(int pll)
+{
+ unsigned char mul, div;
+
+ mul = (pll >> 8) & 0xff;
+ div = pll & 0xff;
+
+ if (div > 0)
+ return NFORCE2_XTAL * mul / div;
+
+ return 0;
+}
+
+/*
+ * nforce2_calc_pll - calculate PLL value
+ * @fsb: FSB
+ *
+ * Calculate PLL value for given FSB
+ */
+static int nforce2_calc_pll(unsigned int fsb)
+{
+ unsigned char xmul, xdiv;
+ unsigned char mul = 0, div = 0;
+ int tried = 0;
+
+ /* Try to calculate multiplier and divider up to 4 times */
+ while (((mul == 0) || (div == 0)) && (tried <= 3)) {
+ for (xdiv = 1; xdiv <= 0x80; xdiv++)
+ for (xmul = 1; xmul <= 0xfe; xmul++)
+ if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
+ fsb + tried) {
+ mul = xmul;
+ div = xdiv;
+ }
+ tried++;
+ }
+
+ if ((mul == 0) || (div == 0))
+ return -1;
+
+ return NFORCE2_PLL(mul, div);
+}
+
+/*
+ * nforce2_write_pll - write PLL value to chipset
+ * @pll: PLL value
+ *
+ * Writes new FSB PLL value to chipset
+ */
+static void nforce2_write_pll(int pll)
+{
+ int temp;
+
+ /* Set the pll addr. to 0x00 */
+ temp = 0x00;
+ pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
+
+ /* Now write the value in all 64 registers */
+ for (temp = 0; temp <= 0x3f; temp++) {
+ pci_write_config_dword(nforce2_chipset_dev,
+ NFORCE2_PLLREG, pll);
+ }
+
+ return;
+}
+
+/*
+ * nforce2_fsb_read - Read FSB
+ *
+ * Read FSB from chipset
+ * If bootfsb != 0, return FSB at boot-time
+ */
+static unsigned int nforce2_fsb_read(int bootfsb)
+{
+ struct pci_dev *nforce2_sub5;
+ u32 fsb, temp = 0;
+
+
+ /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
+ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+ 0x01EF,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+
+ if (!nforce2_sub5)
+ return 0;
+
+ pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
+ fsb /= 1000000;
+
+ /* Check if PLL register is already set */
+ pci_read_config_byte(nforce2_chipset_dev,
+ NFORCE2_PLLENABLE, (u8 *)&temp);
+
+ if(bootfsb || !temp)
+ return fsb;
+
+ /* Use PLL register FSB value */
+ pci_read_config_dword(nforce2_chipset_dev,
+ NFORCE2_PLLREG, &temp);
+ fsb = nforce2_calc_fsb(temp);
+
+ return fsb;
+}
+
+/*
+ * nforce2_set_fsb - set new FSB
+ * @fsb: New FSB
+ *
+ * Sets new FSB
+ */
+static int nforce2_set_fsb(unsigned int fsb)
+{
+ u32 pll, temp = 0;
+ unsigned int tfsb;
+ int diff;
+
+ if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
+ printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+ return -EINVAL;
+ }
+
+ tfsb = nforce2_fsb_read(0);
+ if (!tfsb) {
+ printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+ return -EINVAL;
+ }
+
+ /* First write? Then set actual value */
+ pci_read_config_byte(nforce2_chipset_dev,
+ NFORCE2_PLLENABLE, (u8 *)&temp);
+ if (!temp) {
+ pll = nforce2_calc_pll(tfsb);
+
+ if (pll < 0)
+ return -EINVAL;
+
+ nforce2_write_pll(pll);
+ }
+
+ /* Enable write access */
+ temp = 0x01;
+ pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp);
+
+ diff = tfsb - fsb;
+
+ if (!diff)
+ return 0;
+
+ while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
+ if (diff < 0)
+ tfsb++;
+ else
+ tfsb--;
+
+ /* Calculate the PLL reg. value */
+ if ((pll = nforce2_calc_pll(tfsb)) == -1)
+ return -EINVAL;
+
+ nforce2_write_pll(pll);
+#ifdef NFORCE2_DELAY
+ mdelay(NFORCE2_DELAY);
+#endif
+ }
+
+ temp = 0x40;
+ pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp);
+
+ return 0;
+}
+
+/**
+ * nforce2_get - get the CPU frequency
+ * @cpu: CPU number
+ *
+ * Returns the CPU frequency
+ */
+static unsigned int nforce2_get(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+ return nforce2_fsb_read(0) * fid * 100;
+}
+
+/**
+ * nforce2_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int nforce2_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+// unsigned long flags;
+ struct cpufreq_freqs freqs;
+ unsigned int target_fsb;
+
+ if ((target_freq > policy->max) || (target_freq < policy->min))
+ return -EINVAL;
+
+ target_fsb = target_freq / (fid * 100);
+
+ freqs.old = nforce2_get(policy->cpu);
+ freqs.new = target_fsb * fid * 100;
+ freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ dprintk(KERN_INFO "cpufreq: Old CPU frequency %d kHz, new %d kHz\n",
+ freqs.old, freqs.new);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* Disable IRQs */
+ //local_irq_save(flags);
+
+ if (nforce2_set_fsb(target_fsb) < 0)
+ printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+ target_fsb);
+ else
+ dprintk(KERN_INFO "cpufreq: Changed FSB successfully to %d\n",
+ target_fsb);
+
+ /* Enable IRQs */
+ //local_irq_restore(flags);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+/**
+ * nforce2_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ */
+static int nforce2_verify(struct cpufreq_policy *policy)
+{
+ unsigned int fsb_pol_max;
+
+ fsb_pol_max = policy->max / (fid * 100);
+
+ if (policy->min < (fsb_pol_max * fid * 100))
+ policy->max = (fsb_pol_max + 1) * fid * 100;
+
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+ return 0;
+}
+
+static int nforce2_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int fsb;
+ unsigned int rfid;
+
+ /* capability check */
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ /* Get current FSB */
+ fsb = nforce2_fsb_read(0);
+
+ if (!fsb)
+ return -EIO;
+
+ /* FIX: Get FID from CPU */
+ if (!fid) {
+ if (!cpu_khz) {
+ printk(KERN_WARNING
+ "cpufreq: cpu_khz not set, can't calculate multiplier!\n");
+ return -ENODEV;
+ }
+
+ fid = cpu_khz / (fsb * 100);
+ rfid = fid % 5;
+
+ if (rfid) {
+ if (rfid > 2)
+ fid += 5 - rfid;
+ else
+ fid -= rfid;
+ }
+ }
+
+ printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+ fid / 10, fid % 10);
+
+ /* Set maximum FSB to FSB at boot time */
+ max_fsb = nforce2_fsb_read(1);
+
+ if(!max_fsb)
+ return -EIO;
+
+ if (!min_fsb)
+ min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
+
+ if (min_fsb < NFORCE2_MIN_FSB)
+ min_fsb = NFORCE2_MIN_FSB;
+
+ /* cpuinfo and default policy values */
+ policy->cpuinfo.min_freq = min_fsb * fid * 100;
+ policy->cpuinfo.max_freq = max_fsb * fid * 100;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = nforce2_get(policy->cpu);
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ return 0;
+}
+
+static int nforce2_cpu_exit(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+
+static struct cpufreq_driver nforce2_driver = {
+ .name = "nforce2",
+ .verify = nforce2_verify,
+ .target = nforce2_target,
+ .get = nforce2_get,
+ .init = nforce2_cpu_init,
+ .exit = nforce2_cpu_exit,
+ .owner = THIS_MODULE,
+};
+
+/**
+ * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
+ *
+ * Detects nForce2 A2 and C1 stepping
+ *
+ */
+static unsigned int nforce2_detect_chipset(void)
+{
+ u8 revision;
+
+ nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_NFORCE2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+
+ if (nforce2_chipset_dev == NULL)
+ return -ENODEV;
+
+ pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
+
+ printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
+ revision);
+ printk(KERN_INFO
+ "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
+
+ return 0;
+}
+
+/**
+ * nforce2_init - initializes the nForce2 CPUFreq driver
+ *
+ * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init nforce2_init(void)
+{
+ /* TODO: do we need to detect the processor? */
+
+ /* detect chipset */
+ if (nforce2_detect_chipset()) {
+ printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+ return -ENODEV;
+ }
+
+ return cpufreq_register_driver(&nforce2_driver);
+}
+
+/**
+ * nforce2_exit - unregisters cpufreq module
+ *
+ * Unregisters nForce2 FSB change support.
+ */
+static void __exit nforce2_exit(void)
+{
+ cpufreq_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
new file mode 100644
index 0000000..3f7caa4
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
@@ -0,0 +1,312 @@
+/*
+ * elanfreq: cpufreq driver for the AMD ELAN family
+ *
+ * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * Parts of this code are (c) Sven Geggus <sven@geggus.net>
+ *
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
+#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+ int clock; /* frequency in kHz */
+ int val40h; /* PMU Force Mode register */
+ int val80h; /* CPU Clock Speed Register */
+};
+
+/*
+ * It is important that the frequencies
+ * are listed in ascending order here!
+ */
+struct s_elan_multiplier elan_multiplier[] = {
+ {1000, 0x02, 0x18},
+ {2000, 0x02, 0x10},
+ {4000, 0x02, 0x08},
+ {8000, 0x00, 0x00},
+ {16000, 0x00, 0x02},
+ {33000, 0x00, 0x04},
+ {66000, 0x01, 0x04},
+ {99000, 0x01, 0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+ {0, 1000},
+ {1, 2000},
+ {2, 4000},
+ {3, 8000},
+ {4, 16000},
+ {5, 33000},
+ {6, 66000},
+ {7, 99000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+
+/**
+ * elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ * Finds out at which frequency the CPU of the Elan SOC runs
+ * at the moment. Frequencies from 1 to 33 MHz are generated
+ * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ * and have the rest of the chip running with 33 MHz.
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+ u8 clockspeed_reg; /* Clock Speed Register */
+
+ local_irq_disable();
+ outb_p(0x80,REG_CSCIR);
+ clockspeed_reg = inb_p(REG_CSCDR);
+ local_irq_enable();
+
+ if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
+
+ /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+ if ((clockspeed_reg & 0xE0) == 0xC0) {
+ if ((clockspeed_reg & 0x01) == 0) {
+ return 66000;
+ } else {
+ return 99000;
+ }
+ }
+
+ /* 33 MHz is not 32 MHz... */
+ if ((clockspeed_reg & 0xE0)==0xA0)
+ return 33000;
+
+ return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+}
+
+
+/**
+ * elanfreq_set_cpu_frequency: Change the CPU core frequency
+ * @cpu: cpu number
+ * @freq: frequency in kHz
+ *
+ * This function takes a frequency value and changes the CPU frequency
+ * according to this. Note that the frequency has to be checked by
+ * elanfreq_validatespeed() for correctness!
+ *
+ * There is no return value.
+ */
+
+static void elanfreq_set_cpu_state (unsigned int state) {
+
+ struct cpufreq_freqs freqs;
+
+ freqs.old = elanfreq_get_cpu_frequency(0);
+ freqs.new = elan_multiplier[state].clock;
+ freqs.cpu = 0; /* elanfreq.c is UP only driver */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
+
+
+ /*
+ * Access to the Elan's internal registers is indexed via
+ * 0x22: Chip Setup & Control Register Index Register (CSCI)
+ * 0x23: Chip Setup & Control Register Data Register (CSCD)
+ *
+ */
+
+ /*
+ * 0x40 is the Power Management Unit's Force Mode Register.
+ * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+ */
+
+ local_irq_disable();
+ outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
+ outb_p(0x00,REG_CSCDR);
+ local_irq_enable(); /* wait till internal pipelines and */
+ udelay(1000); /* buffers have cleaned up */
+
+ local_irq_disable();
+
+ /* now, set the CPU clock speed register (0x80) */
+ outb_p(0x80,REG_CSCIR);
+ outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+
+ /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+ outb_p(0x40,REG_CSCIR);
+ outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+ udelay(10000);
+ local_irq_enable();
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ * elanfreq_validatespeed: test if frequency range is valid
+ * @policy: the policy to validate
+ *
+ * This function checks if a given frequency range in kHz is valid
+ * for the hardware supported by the driver.
+ */
+
+static int elanfreq_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
+}
+
+static int elanfreq_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+ return -EINVAL;
+
+ elanfreq_set_cpu_state(newstate);
+
+ return 0;
+}
+
+
+/*
+ * Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ unsigned int i;
+ int result;
+
+ /* capability check */
+ if ((c->x86_vendor != X86_VENDOR_AMD) ||
+ (c->x86 != 4) || (c->x86_model!=10))
+ return -ENODEV;
+
+ /* max freq */
+ if (!max_freq)
+ max_freq = elanfreq_get_cpu_frequency(0);
+
+ /* table init */
+ for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (elanfreq_table[i].frequency > max_freq)
+ elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = elanfreq_get_cpu_frequency(0);
+
+ result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
+
+ return 0;
+}
+
+
+static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter. Use:
+ * elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+ max_freq = simple_strtoul(str, &str, 0);
+ printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+ return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct freq_attr* elanfreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+
+static struct cpufreq_driver elanfreq_driver = {
+ .get = elanfreq_get_cpu_frequency,
+ .verify = elanfreq_verify,
+ .target = elanfreq_target,
+ .init = elanfreq_cpu_init,
+ .exit = elanfreq_cpu_exit,
+ .name = "elanfreq",
+ .owner = THIS_MODULE,
+ .attr = elanfreq_attr,
+};
+
+
+static int __init elanfreq_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ /* Test if we have the right hardware */
+ if ((c->x86_vendor != X86_VENDOR_AMD) ||
+ (c->x86 != 4) || (c->x86_model!=10))
+ {
+ printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+ return -ENODEV;
+ }
+
+ return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void)
+{
+ cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param (max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
new file mode 100644
index 0000000..1a49adb
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -0,0 +1,502 @@
+/*
+ * Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ * (C) 2002 Hiroshi Miura <miura@da-cha.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation
+ *
+ * The author(s) of this software shall not be held liable for damages
+ * of any nature resulting due to the use of this software. This
+ * software is provided AS-IS with no warranties.
+ *
+ * Theoritical note:
+ *
+ * (see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ * are based on Suspend Moduration.
+ *
+ * Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ * the CPU enters an idle state. GX1 stops its core clock when SUSP# is
+ * asserted then power consumption is reduced.
+ *
+ * Suspend Modulation's OFF/ON duration are configurable
+ * with 'Suspend Modulation OFF Count Register'
+ * and 'Suspend Modulation ON Count Register'.
+ * These registers are 8bit counters that represent the number of
+ * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ * to the processor.
+ *
+ * These counters define a ratio which is the effective frequency
+ * of operation of the system.
+ *
+ * OFF Count
+ * F_eff = Fgx * ----------------------
+ * OFF Count + ON Count
+ *
+ * 0 <= On Count, Off Count <= 255
+ *
+ * From these limits, we can get register values
+ *
+ * off_duration + on_duration <= MAX_DURATION
+ * on_duration = off_duration * (stock_freq - freq) / freq
+ *
+ * off_duration = (freq * DURATION) / stock_freq
+ * on_duration = DURATION - off_duration
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
+ * - fix on/off register mistake
+ * - fix cpu_khz calc when it stops cpu modulation.
+ *
+ * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
+ * - rewrite for Cyrix MediaGX Cx5510/5520 and
+ * NatSemi Geode Cs5530(A).
+ *
+ * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ * - cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ * Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ * Suspend Modulation - Definitions *
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1 0x80 /* power management enable register 1 */
+#define PCI_PMER2 0x81 /* power management enable register 2 */
+#define PCI_PMER3 0x82 /* power management enable register 3 */
+#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON 0x95 /* suspend modulation ON counter register */
+#define PCI_SUSCFG 0x96 /* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM (1<<0) /* global power management */
+#define GIT (1<<1) /* globally enable PM device idle timers */
+#define GTR (1<<2) /* globally enable IO traps */
+#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
+#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD (1<<0) /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
+ /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */
+#define PWRSVE_ISA (1<<3) /* stop ISA clock */
+#define PWRSVE (1<<4) /* active idle */
+
+struct gxfreq_params {
+ u8 on_duration;
+ u8 off_duration;
+ u8 pci_suscfg;
+ u8 pci_pmer1;
+ u8 pci_pmer2;
+ u8 pci_rev;
+ struct pci_dev *cs55x0;
+};
+
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+
+/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
+static int pci_busclk = 0;
+module_param (pci_busclk, int, 0444);
+
+/* maximum duration for which the cpu may be suspended
+ * (32us * MAX_DURATION). If no parameter is given, this defaults
+ * to 255.
+ * Note that this leads to a maximum of 8 ms(!) where the CPU clock
+ * is suspended -- processing power is just 0.39% of what it used to be,
+ * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
+static int max_duration = 255;
+module_param (max_duration, int, 0444);
+
+/* For the default policy, we want at least some processing power
+ * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
+ */
+#define POLICY_MIN_DIV 20
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+
+/**
+ * we can detect a core multipiler from dir0_lsb
+ * from GX1 datasheet p.56,
+ * MULT[3:0]:
+ * 0000 = SYSCLK multiplied by 4 (test only)
+ * 0001 = SYSCLK multiplied by 10
+ * 0010 = SYSCLK multiplied by 4
+ * 0011 = SYSCLK multiplied by 6
+ * 0100 = SYSCLK multiplied by 9
+ * 0101 = SYSCLK multiplied by 5
+ * 0110 = SYSCLK multiplied by 7
+ * 0111 = SYSCLK multiplied by 8
+ * of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+ 4, 10, 4, 6, 9, 5, 7, 8,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+
+/****************************************************************
+ * Low Level chipset interface *
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, },
+};
+
+/**
+ * gx_detect_chipset:
+ *
+ **/
+static __init struct pci_dev *gx_detect_chipset(void)
+{
+ struct pci_dev *gx_pci = NULL;
+
+ /* check if CPU is a MediaGX or a Geode. */
+ if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
+ (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
+ dprintk("error: no MediaGX/Geode processor found!\n");
+ return NULL;
+ }
+
+ /* detect which companion chip is used */
+ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
+ if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) {
+ return gx_pci;
+ }
+ }
+
+ dprintk("error: no supported chipset found!\n");
+ return NULL;
+}
+
+/**
+ * gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ */
+static unsigned int gx_get_cpuspeed(unsigned int cpu)
+{
+ if ((gx_params->pci_suscfg & SUSMOD) == 0)
+ return stock_freq;
+
+ return (stock_freq * gx_params->off_duration)
+ / (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ * gx_validate_speed:
+ * determine current cpu speed
+ *
+**/
+
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+{
+ unsigned int i;
+ u8 tmp_on, tmp_off;
+ int old_tmp_freq = stock_freq;
+ int tmp_freq;
+
+ *off_duration=1;
+ *on_duration=0;
+
+ for (i=max_duration; i>0; i--) {
+ tmp_off = ((khz * i) / stock_freq) & 0xff;
+ tmp_on = i - tmp_off;
+ tmp_freq = (stock_freq * tmp_off) / i;
+ /* if this relation is closer to khz, use this. If it's equal,
+ * prefer it, too - lower latency */
+ if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
+ *on_duration = tmp_on;
+ *off_duration = tmp_off;
+ old_tmp_freq = tmp_freq;
+ }
+ }
+
+ return old_tmp_freq;
+}
+
+
+/**
+ * gx_set_cpuspeed:
+ * set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(unsigned int khz)
+{
+ u8 suscfg, pmer1;
+ unsigned int new_khz;
+ unsigned long flags;
+ struct cpufreq_freqs freqs;
+
+
+ freqs.cpu = 0;
+ freqs.old = gx_get_cpuspeed(0);
+
+ new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+
+ freqs.new = new_khz;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+
+ if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */
+ switch (gx_params->cs55x0->device) {
+ case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+ pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+ /* FIXME: need to test other values -- Zwane,Miura */
+ pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
+ pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
+ pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
+
+ if (gx_params->pci_rev < 0x10) { /* CS5530(rev 1.2, 1.3) */
+ suscfg = gx_params->pci_suscfg | SUSMOD;
+ } else { /* CS5530A,B.. */
+ suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+ }
+ break;
+ case PCI_DEVICE_ID_CYRIX_5520:
+ case PCI_DEVICE_ID_CYRIX_5510:
+ suscfg = gx_params->pci_suscfg | SUSMOD;
+ break;
+ default:
+ local_irq_restore(flags);
+ dprintk("fatal: try to set unknown chipset.\n");
+ return;
+ }
+ } else {
+ suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+ gx_params->off_duration = 0;
+ gx_params->on_duration = 0;
+ dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+ }
+
+ pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
+ pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+
+ pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+ pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+ local_irq_restore(flags);
+
+ gx_params->pci_suscfg = suscfg;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+ gx_params->on_duration * 32, gx_params->off_duration * 32);
+ dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+}
+
+/****************************************************************
+ * High level functions *
+ ****************************************************************/
+
+/*
+ * cpufreq_gx_verify: test if frequency range is valid
+ *
+ * This function checks if a given frequency range in kHz is valid
+ * for the hardware supported by the driver.
+ */
+
+static int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+ unsigned int tmp_freq = 0;
+ u8 tmp1, tmp2;
+
+ if (!stock_freq || !policy)
+ return -EINVAL;
+
+ policy->cpu = 0;
+ cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+
+ /* it needs to be assured that at least one supported frequency is
+ * within policy->min and policy->max. If it is not, policy->max
+ * needs to be increased until one freuqency is supported.
+ * policy->min may not be decreased, though. This way we guarantee a
+ * specific processing capacity.
+ */
+ tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
+ if (tmp_freq < policy->min)
+ tmp_freq += stock_freq / max_duration;
+ policy->min = tmp_freq;
+ if (policy->min > policy->max)
+ policy->max = tmp_freq;
+ tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
+ if (tmp_freq > policy->max)
+ tmp_freq -= stock_freq / max_duration;
+ policy->max = tmp_freq;
+ if (policy->max < policy->min)
+ policy->max = policy->min;
+ cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+
+ return 0;
+}
+
+/*
+ * cpufreq_gx_target:
+ *
+ */
+static int cpufreq_gx_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ u8 tmp1, tmp2;
+ unsigned int tmp_freq;
+
+ if (!stock_freq || !policy)
+ return -EINVAL;
+
+ policy->cpu = 0;
+
+ tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
+ while (tmp_freq < policy->min) {
+ tmp_freq += stock_freq / max_duration;
+ tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+ }
+ while (tmp_freq > policy->max) {
+ tmp_freq -= stock_freq / max_duration;
+ tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+ }
+
+ gx_set_cpuspeed(tmp_freq);
+
+ return 0;
+}
+
+static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int maxfreq, curfreq;
+
+ if (!policy || policy->cpu != 0)
+ return -ENODEV;
+
+ /* determine maximum frequency */
+ if (pci_busclk) {
+ maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+ } else if (cpu_khz) {
+ maxfreq = cpu_khz;
+ } else {
+ maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+ }
+ stock_freq = maxfreq;
+ curfreq = gx_get_cpuspeed(0);
+
+ dprintk("cpu max frequency is %d.\n", maxfreq);
+ dprintk("cpu current frequency is %dkHz.\n",curfreq);
+
+ /* setup basic struct for cpufreq API */
+ policy->cpu = 0;
+
+ if (max_duration < POLICY_MIN_DIV)
+ policy->min = maxfreq / max_duration;
+ else
+ policy->min = maxfreq / POLICY_MIN_DIV;
+ policy->max = maxfreq;
+ policy->cur = curfreq;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.min_freq = maxfreq / max_duration;
+ policy->cpuinfo.max_freq = maxfreq;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+ return 0;
+}
+
+/*
+ * cpufreq_gx_init:
+ * MediaGX/Geode GX initialize cpufreq driver
+ */
+static struct cpufreq_driver gx_suspmod_driver = {
+ .get = gx_get_cpuspeed,
+ .verify = cpufreq_gx_verify,
+ .target = cpufreq_gx_target,
+ .init = cpufreq_gx_cpu_init,
+ .name = "gx-suspmod",
+ .owner = THIS_MODULE,
+};
+
+static int __init cpufreq_gx_init(void)
+{
+ int ret;
+ struct gxfreq_params *params;
+ struct pci_dev *gx_pci;
+ u32 class_rev;
+
+ /* Test if we have the right hardware */
+ if ((gx_pci = gx_detect_chipset()) == NULL)
+ return -ENODEV;
+
+ /* check whether module parameters are sane */
+ if (max_duration > 0xff)
+ max_duration = 0xff;
+
+ dprintk("geode suspend modulation available.\n");
+
+ params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+ if (params == NULL)
+ return -ENOMEM;
+ memset(params, 0, sizeof(struct gxfreq_params));
+
+ params->cs55x0 = gx_pci;
+ gx_params = params;
+
+ /* keep cs55x0 configurations */
+ pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+ pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+ pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+ pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+ pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+ pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
+ params->pci_rev = class_rev && 0xff;
+
+ if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
+ kfree(params);
+ return ret; /* register error! */
+ }
+
+ return 0;
+}
+
+static void __exit cpufreq_gx_exit(void)
+{
+ cpufreq_unregister_driver(&gx_suspmod_driver);
+ pci_dev_put(gx_params->cs55x0);
+ kfree(gx_params);
+}
+
+MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
new file mode 100644
index 0000000..ab0f9f5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -0,0 +1,658 @@
+/*
+ * (C) 2001-2004 Dave Jones. <davej@codemonkey.org.uk>
+ * (C) 2002 Padraig Brady. <padraig@antefacto.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ * VIA have currently 3 different versions of Longhaul.
+ * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
+ * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
+ * Version 2 of longhaul is the same as v1, but adds voltage scaling.
+ * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
+ * voltage scaling support has currently been disabled in this driver
+ * until we have code that gets it right.
+ * Version 3 of longhaul got renamed to Powersaver and redesigned
+ * to use the POWERSAVER MSR at 0x110a.
+ * It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
+ * It's pretty much the same feature wise to longhaul v2, though
+ * there is provision for scaling FSB too, but this doesn't work
+ * too well in practice so we don't even try to use this.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#include "longhaul.h"
+
+#define PFX "longhaul: "
+
+#define TYPE_LONGHAUL_V1 1
+#define TYPE_LONGHAUL_V2 2
+#define TYPE_POWERSAVER 3
+
+#define CPU_SAMUEL 1
+#define CPU_SAMUEL2 2
+#define CPU_EZRA 3
+#define CPU_EZRA_T 4
+#define CPU_NEHEMIAH 5
+
+static int cpu_model;
+static unsigned int numscales=16, numvscales;
+static unsigned int fsb;
+static int minvid, maxvid;
+static unsigned int minmult, maxmult;
+static int can_scale_voltage;
+static int vrmrev;
+
+/* Module parameters */
+static int dont_scale_voltage;
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
+
+
+#define __hlt() __asm__ __volatile__("hlt": : :"memory")
+
+/* Clock ratios multiplied by 10 */
+static int clock_ratio[32];
+static int eblcr_table[32];
+static int voltage_table[32];
+static unsigned int highest_speed, lowest_speed; /* kHz */
+static int longhaul_version;
+static struct cpufreq_frequency_table *longhaul_table;
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+static char speedbuffer[8];
+
+static char *print_speed(int speed)
+{
+ if (speed > 1000) {
+ if (speed%1000 == 0)
+ sprintf (speedbuffer, "%dGHz", speed/1000);
+ else
+ sprintf (speedbuffer, "%d.%dGHz", speed/1000, (speed%1000)/100);
+ } else
+ sprintf (speedbuffer, "%dMHz", speed);
+
+ return speedbuffer;
+}
+#endif
+
+
+static unsigned int calc_speed(int mult)
+{
+ int khz;
+ khz = (mult/10)*fsb;
+ if (mult%10)
+ khz += fsb/2;
+ khz *= 1000;
+ return khz;
+}
+
+
+static int longhaul_get_cpu_mult(void)
+{
+ unsigned long invalue=0,lo, hi;
+
+ rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+ invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
+ if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
+ if (lo & (1<<27))
+ invalue+=16;
+ }
+ return eblcr_table[invalue];
+}
+
+
+static void do_powersaver(union msr_longhaul *longhaul,
+ unsigned int clock_ratio_index)
+{
+ int version;
+
+ switch (cpu_model) {
+ case CPU_EZRA_T:
+ version = 3;
+ break;
+ case CPU_NEHEMIAH:
+ version = 0xf;
+ break;
+ default:
+ return;
+ }
+
+ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+ longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf;
+ longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+ longhaul->bits.EnableSoftBusRatio = 1;
+ longhaul->bits.RevisionKey = 0;
+ local_irq_disable();
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+ local_irq_enable();
+ __hlt();
+
+ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+ longhaul->bits.EnableSoftBusRatio = 0;
+ longhaul->bits.RevisionKey = version;
+ local_irq_disable();
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+ local_irq_enable();
+}
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @clock_ratio_index : bitpattern of the new multiplier.
+ *
+ * Sets a new clock ratio.
+ */
+
+static void longhaul_setstate(unsigned int clock_ratio_index)
+{
+ int speed, mult;
+ struct cpufreq_freqs freqs;
+ union msr_longhaul longhaul;
+ union msr_bcr2 bcr2;
+ static unsigned int old_ratio=-1;
+
+ if (old_ratio == clock_ratio_index)
+ return;
+ old_ratio = clock_ratio_index;
+
+ mult = clock_ratio[clock_ratio_index];
+ if (mult == -1)
+ return;
+
+ speed = calc_speed(mult);
+ if ((speed > highest_speed) || (speed < lowest_speed))
+ return;
+
+ freqs.old = calc_speed(longhaul_get_cpu_mult());
+ freqs.new = speed;
+ freqs.cpu = 0; /* longhaul.c is UP only driver */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+ fsb, mult/10, mult%10, print_speed(speed/1000));
+
+ switch (longhaul_version) {
+
+ /*
+ * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
+ * Software controlled multipliers only.
+ *
+ * *NB* Until we get voltage scaling working v1 & v2 are the same code.
+ * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
+ */
+ case TYPE_LONGHAUL_V1:
+ case TYPE_LONGHAUL_V2:
+ rdmsrl (MSR_VIA_BCR2, bcr2.val);
+ /* Enable software clock multiplier */
+ bcr2.bits.ESOFTBF = 1;
+ bcr2.bits.CLOCKMUL = clock_ratio_index;
+ local_irq_disable();
+ wrmsrl (MSR_VIA_BCR2, bcr2.val);
+ local_irq_enable();
+
+ __hlt();
+
+ /* Disable software clock multiplier */
+ rdmsrl (MSR_VIA_BCR2, bcr2.val);
+ bcr2.bits.ESOFTBF = 0;
+ local_irq_disable();
+ wrmsrl (MSR_VIA_BCR2, bcr2.val);
+ local_irq_enable();
+ break;
+
+ /*
+ * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
+ * We can scale voltage with this too, but that's currently
+ * disabled until we come up with a decent 'match freq to voltage'
+ * algorithm.
+ * When we add voltage scaling, we will also need to do the
+ * voltage/freq setting in order depending on the direction
+ * of scaling (like we do in powernow-k7.c)
+ * Nehemiah can do FSB scaling too, but this has never been proven
+ * to work in practice.
+ */
+ case TYPE_POWERSAVER:
+ do_powersaver(&longhaul, clock_ratio_index);
+ break;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+/*
+ * Centaur decided to make life a little more tricky.
+ * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
+ * Samuel2 and above have to try and guess what the FSB is.
+ * We do this by assuming we booted at maximum multiplier, and interpolate
+ * between that value multiplied by possible FSBs and cpu_mhz which
+ * was calculated at boot time. Really ugly, but no other way to do this.
+ */
+
+#define ROUNDING 0xf
+
+static int _guess(int guess)
+{
+ int target;
+
+ target = ((maxmult/10)*guess);
+ if (maxmult%10 != 0)
+ target += (guess/2);
+ target += ROUNDING/2;
+ target &= ~ROUNDING;
+ return target;
+}
+
+
+static int guess_fsb(void)
+{
+ int speed = (cpu_khz/1000);
+ int i;
+ int speeds[3] = { 66, 100, 133 };
+
+ speed += ROUNDING/2;
+ speed &= ~ROUNDING;
+
+ for (i=0; i<3; i++) {
+ if (_guess(speeds[i]) == speed)
+ return speeds[i];
+ }
+ return 0;
+}
+
+
+static int __init longhaul_get_ranges(void)
+{
+ unsigned long invalue;
+ unsigned int multipliers[32]= {
+ 50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
+ -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+ unsigned int j, k = 0;
+ union msr_longhaul longhaul;
+ unsigned long lo, hi;
+ unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 };
+ unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 };
+
+ switch (longhaul_version) {
+ case TYPE_LONGHAUL_V1:
+ case TYPE_LONGHAUL_V2:
+ /* Ugh, Longhaul v1 didn't have the min/max MSRs.
+ Assume min=3.0x & max = whatever we booted at. */
+ minmult = 30;
+ maxmult = longhaul_get_cpu_mult();
+ rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+ invalue = (lo & (1<<18|1<<19)) >>18;
+ if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2)
+ fsb = eblcr_fsb_table_v1[invalue];
+ else
+ fsb = guess_fsb();
+ break;
+
+ case TYPE_POWERSAVER:
+ /* Ezra-T */
+ if (cpu_model==CPU_EZRA_T) {
+ rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+ invalue = longhaul.bits.MaxMHzBR;
+ if (longhaul.bits.MaxMHzBR4)
+ invalue += 16;
+ maxmult=multipliers[invalue];
+
+ invalue = longhaul.bits.MinMHzBR;
+ if (longhaul.bits.MinMHzBR4 == 1)
+ minmult = 30;
+ else
+ minmult = multipliers[invalue];
+ fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+ break;
+ }
+
+ /* Nehemiah */
+ if (cpu_model==CPU_NEHEMIAH) {
+ rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+ /*
+ * TODO: This code works, but raises a lot of questions.
+ * - Some Nehemiah's seem to have broken Min/MaxMHzBR's.
+ * We get around this by using a hardcoded multiplier of 4.0x
+ * for the minimimum speed, and the speed we booted up at for the max.
+ * This is done in longhaul_get_cpu_mult() by reading the EBLCR register.
+ * - According to some VIA documentation EBLCR is only
+ * in pre-Nehemiah C3s. How this still works is a mystery.
+ * We're possibly using something undocumented and unsupported,
+ * But it works, so we don't grumble.
+ */
+ minmult=40;
+ maxmult=longhaul_get_cpu_mult();
+
+ /* Starting with the 1.2GHz parts, theres a 200MHz bus. */
+ if ((cpu_khz/1000) > 1200)
+ fsb = 200;
+ else
+ fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+ break;
+ }
+ }
+
+ dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
+ minmult/10, minmult%10, maxmult/10, maxmult%10);
+
+ if (fsb == -1) {
+ printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
+ return -EINVAL;
+ }
+
+ highest_speed = calc_speed(maxmult);
+ lowest_speed = calc_speed(minmult);
+ dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
+ print_speed(lowest_speed/1000),
+ print_speed(highest_speed/1000));
+
+ if (lowest_speed == highest_speed) {
+ printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+ return -EINVAL;
+ }
+ if (lowest_speed > highest_speed) {
+ printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+ lowest_speed, highest_speed);
+ return -EINVAL;
+ }
+
+ longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
+ if(!longhaul_table)
+ return -ENOMEM;
+
+ for (j=0; j < numscales; j++) {
+ unsigned int ratio;
+ ratio = clock_ratio[j];
+ if (ratio == -1)
+ continue;
+ if (ratio > maxmult || ratio < minmult)
+ continue;
+ longhaul_table[k].frequency = calc_speed(ratio);
+ longhaul_table[k].index = j;
+ k++;
+ }
+
+ longhaul_table[k].frequency = CPUFREQ_TABLE_END;
+ if (!k) {
+ kfree (longhaul_table);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static void __init longhaul_setup_voltagescaling(void)
+{
+ union msr_longhaul longhaul;
+
+ rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+ if (!(longhaul.bits.RevisionID & 1))
+ return;
+
+ minvid = longhaul.bits.MinimumVID;
+ maxvid = longhaul.bits.MaximumVID;
+ vrmrev = longhaul.bits.VRMRev;
+
+ if (minvid == 0 || maxvid == 0) {
+ printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+ "Voltage scaling disabled.\n",
+ minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
+ return;
+ }
+
+ if (minvid == maxvid) {
+ printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
+ "both %d.%03d. Voltage scaling disabled\n",
+ maxvid/1000, maxvid%1000);
+ return;
+ }
+
+ if (vrmrev==0) {
+ dprintk ("VRM 8.5 \n");
+ memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
+ numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
+ } else {
+ dprintk ("Mobile VRM \n");
+ memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
+ numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
+ }
+
+ /* Current voltage isn't readable at first, so we need to
+ set it to a known value. The spec says to use maxvid */
+ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */
+ longhaul.bits.EnableSoftVID = 1;
+ longhaul.bits.SoftVID = maxvid;
+ wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+ minvid = voltage_table[minvid];
+ maxvid = voltage_table[maxvid];
+
+ dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
+ maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
+
+ can_scale_voltage = 1;
+}
+
+
+static int longhaul_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, longhaul_table);
+}
+
+
+static int longhaul_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned int table_index = 0;
+ unsigned int new_clock_ratio = 0;
+
+ if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
+ return -EINVAL;
+
+ new_clock_ratio = longhaul_table[table_index].index & 0xFF;
+
+ longhaul_setstate(new_clock_ratio);
+
+ return 0;
+}
+
+
+static unsigned int longhaul_get(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+ return calc_speed(longhaul_get_cpu_mult());
+}
+
+
+static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ char *cpuname=NULL;
+ int ret;
+
+ switch (c->x86_model) {
+ case 6:
+ cpu_model = CPU_SAMUEL;
+ cpuname = "C3 'Samuel' [C5A]";
+ longhaul_version = TYPE_LONGHAUL_V1;
+ memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+ memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+ break;
+
+ case 7:
+ longhaul_version = TYPE_LONGHAUL_V1;
+ switch (c->x86_mask) {
+ case 0:
+ cpu_model = CPU_SAMUEL2;
+ cpuname = "C3 'Samuel 2' [C5B]";
+ /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
+ memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+ memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
+ break;
+ case 1 ... 15:
+ if (c->x86_mask < 8) {
+ cpu_model = CPU_SAMUEL2;
+ cpuname = "C3 'Samuel 2' [C5B]";
+ } else {
+ cpu_model = CPU_EZRA;
+ cpuname = "C3 'Ezra' [C5C]";
+ }
+ memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
+ memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
+ break;
+ }
+ break;
+
+ case 8:
+ cpu_model = CPU_EZRA_T;
+ cpuname = "C3 'Ezra-T' [C5M]";
+ longhaul_version = TYPE_POWERSAVER;
+ numscales=32;
+ memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
+ memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
+ break;
+
+ case 9:
+ cpu_model = CPU_NEHEMIAH;
+ longhaul_version = TYPE_POWERSAVER;
+ numscales=32;
+ switch (c->x86_mask) {
+ case 0 ... 1:
+ cpuname = "C3 'Nehemiah A' [C5N]";
+ memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio));
+ memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr));
+ break;
+ case 2 ... 4:
+ cpuname = "C3 'Nehemiah B' [C5N]";
+ memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio));
+ memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr));
+ break;
+ case 5 ... 15:
+ cpuname = "C3 'Nehemiah C' [C5N]";
+ memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio));
+ memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr));
+ break;
+ }
+ break;
+
+ default:
+ cpuname = "Unknown";
+ break;
+ }
+
+ printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
+ switch (longhaul_version) {
+ case TYPE_LONGHAUL_V1:
+ case TYPE_LONGHAUL_V2:
+ printk ("Longhaul v%d supported.\n", longhaul_version);
+ break;
+ case TYPE_POWERSAVER:
+ printk ("Powersaver supported.\n");
+ break;
+ };
+
+ ret = longhaul_get_ranges();
+ if (ret != 0)
+ return ret;
+
+ if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
+ (dont_scale_voltage==0))
+ longhaul_setup_voltagescaling();
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = calc_speed(longhaul_get_cpu_mult());
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
+ if (ret)
+ return ret;
+
+ cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
+
+ return 0;
+}
+
+static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr* longhaul_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver longhaul_driver = {
+ .verify = longhaul_verify,
+ .target = longhaul_target,
+ .get = longhaul_get,
+ .init = longhaul_cpu_init,
+ .exit = __devexit_p(longhaul_cpu_exit),
+ .name = "longhaul",
+ .owner = THIS_MODULE,
+ .attr = longhaul_attr,
+};
+
+
+static int __init longhaul_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+ return -ENODEV;
+
+ switch (c->x86_model) {
+ case 6 ... 9:
+ return cpufreq_register_driver(&longhaul_driver);
+ default:
+ printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+ }
+
+ return -ENODEV;
+}
+
+
+static void __exit longhaul_exit(void)
+{
+ int i=0;
+
+ for (i=0; i < numscales; i++) {
+ if (clock_ratio[i] == maxmult) {
+ longhaul_setstate(i);
+ break;
+ }
+ }
+
+ cpufreq_unregister_driver(&longhaul_driver);
+ kfree(longhaul_table);
+}
+
+module_param (dont_scale_voltage, int, 0644);
+MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longhaul_init);
+module_exit(longhaul_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
new file mode 100644
index 0000000..2a495c1
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -0,0 +1,466 @@
+/*
+ * longhaul.h
+ * (C) 2003 Dave Jones.
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * VIA-specific information
+ */
+
+union msr_bcr2 {
+ struct {
+ unsigned Reseved:19, // 18:0
+ ESOFTBF:1, // 19
+ Reserved2:3, // 22:20
+ CLOCKMUL:4, // 26:23
+ Reserved3:5; // 31:27
+ } bits;
+ unsigned long val;
+};
+
+union msr_longhaul {
+ struct {
+ unsigned RevisionID:4, // 3:0
+ RevisionKey:4, // 7:4
+ EnableSoftBusRatio:1, // 8
+ EnableSoftVID:1, // 9
+ EnableSoftBSEL:1, // 10
+ Reserved:3, // 11:13
+ SoftBusRatio4:1, // 14
+ VRMRev:1, // 15
+ SoftBusRatio:4, // 19:16
+ SoftVID:5, // 24:20
+ Reserved2:3, // 27:25
+ SoftBSEL:2, // 29:28
+ Reserved3:2, // 31:30
+ MaxMHzBR:4, // 35:32
+ MaximumVID:5, // 40:36
+ MaxMHzFSB:2, // 42:41
+ MaxMHzBR4:1, // 43
+ Reserved4:4, // 47:44
+ MinMHzBR:4, // 51:48
+ MinimumVID:5, // 56:52
+ MinMHzFSB:2, // 58:57
+ MinMHzBR4:1, // 59
+ Reserved5:4; // 63:60
+ } bits;
+ unsigned long long val;
+};
+
+/*
+ * Clock ratio tables. Div/Mod by 10 to get ratio.
+ * The eblcr ones specify the ratio read from the CPU.
+ * The clock_ratio ones specify what to write to the CPU.
+ */
+
+/*
+ * VIA C3 Samuel 1 & Samuel 2 (stepping 0)
+ */
+static int __initdata samuel1_clock_ratio[16] = {
+ -1, /* 0000 -> RESERVED */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ -1, /* 0011 -> RESERVED */
+ -1, /* 0100 -> RESERVED */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ -1, /* 1110 -> RESERVED */
+ -1, /* 1111 -> RESERVED */
+};
+
+static int __initdata samuel1_eblcr[16] = {
+ 50, /* 0000 -> RESERVED */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ -1, /* 0011 -> RESERVED */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ -1, /* 0111 -> RESERVED */
+ -1, /* 1000 -> RESERVED */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ -1, /* 1100 -> RESERVED */
+ 75, /* 1101 -> 7.5x */
+ -1, /* 1110 -> RESERVED */
+ 65, /* 1111 -> 6.5x */
+};
+
+/*
+ * VIA C3 Samuel2 Stepping 1->15
+ */
+static int __initdata samuel2_eblcr[16] = {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 110, /* 0111 -> 11.0x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 130, /* 1110 -> 13.0x */
+ 65, /* 1111 -> 6.5x */
+};
+
+/*
+ * VIA C3 Ezra
+ */
+static int __initdata ezra_clock_ratio[16] = {
+ 100, /* 0000 -> 10.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+};
+
+static int __initdata ezra_eblcr[16] = {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+};
+
+/*
+ * VIA C3 (Ezra-T) [C5M].
+ */
+static int __initdata ezrat_clock_ratio[32] = {
+ 100, /* 0000 -> 10.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+
+ -1, /* 0000 -> RESERVED (10.0x) */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ -1, /* 0011 -> RESERVED (9.0x)*/
+ 105, /* 0100 -> 10.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 135, /* 0111 -> 13.5x */
+ 140, /* 1000 -> 14.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 130, /* 1011 -> 13.0x */
+ 145, /* 1100 -> 14.5x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ -1, /* 1111 -> RESERVED (12.0x) */
+};
+
+static int __initdata ezrat_eblcr[32] = {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+
+ -1, /* 0000 -> RESERVED (9.0x) */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ -1, /* 0011 -> RESERVED (10.0x)*/
+ 135, /* 0100 -> 13.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 105, /* 0111 -> 10.5x */
+ 130, /* 1000 -> 13.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 140, /* 1011 -> 14.0x */
+ -1, /* 1100 -> RESERVED (12.0x) */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 145, /* 1111 -> 14.5x */
+};
+
+/*
+ * VIA C3 Nehemiah */
+
+static int __initdata nehemiah_a_clock_ratio[32] = {
+ 100, /* 0000 -> 10.0x */
+ 160, /* 0001 -> 16.0x */
+ -1, /* 0010 -> RESERVED */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ -1, /* 0101 -> RESERVED */
+ -1, /* 0110 -> RESERVED */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+ 100, /* 0000 -> 10.0x */
+ -1, /* 0001 -> RESERVED */
+ 120, /* 0010 -> 12.0x */
+ 90, /* 0011 -> 9.0x */
+ 105, /* 0100 -> 10.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 135, /* 0111 -> 13.5x */
+ 140, /* 1000 -> 14.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 130, /* 1011 -> 13.0x */
+ 145, /* 1100 -> 14.5x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 120, /* 1111 -> 12.0x */
+};
+
+static int __initdata nehemiah_b_clock_ratio[32] = {
+ 100, /* 0000 -> 10.0x */
+ 160, /* 0001 -> 16.0x */
+ -1, /* 0010 -> RESERVED */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ -1, /* 0101 -> RESERVED */
+ -1, /* 0110 -> RESERVED */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+ 100, /* 0000 -> 10.0x */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ 90, /* 0011 -> 9.0x */
+ 105, /* 0100 -> 10.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 135, /* 0111 -> 13.5x */
+ 140, /* 1000 -> 14.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 130, /* 1011 -> 13.0x */
+ 145, /* 1100 -> 14.5x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 120, /* 1111 -> 12.0x */
+};
+
+static int __initdata nehemiah_c_clock_ratio[32] = {
+ 100, /* 0000 -> 10.0x */
+ 160, /* 0001 -> 16.0x */
+ 40, /* 0010 -> RESERVED */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ -1, /* 0101 -> RESERVED */
+ 45, /* 0110 -> RESERVED */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+ 100, /* 0000 -> 10.0x */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ 90, /* 0011 -> 9.0x */
+ 105, /* 0100 -> 10.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 135, /* 0111 -> 13.5x */
+ 140, /* 1000 -> 14.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 130, /* 1011 -> 13.0x */
+ 145, /* 1100 -> 14.5x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 120, /* 1111 -> 12.0x */
+};
+
+static int __initdata nehemiah_a_eblcr[32] = {
+ 50, /* 0000 -> 5.0x */
+ 160, /* 0001 -> 16.0x */
+ -1, /* 0010 -> RESERVED */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ -1, /* 0101 -> RESERVED */
+ -1, /* 0110 -> RESERVED */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+ 90, /* 0000 -> 9.0x */
+ -1, /* 0001 -> RESERVED */
+ 120, /* 0010 -> 12.0x */
+ 100, /* 0011 -> 10.0x */
+ 135, /* 0100 -> 13.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 105, /* 0111 -> 10.5x */
+ 130, /* 1000 -> 13.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 140, /* 1011 -> 14.0x */
+ 120, /* 1100 -> 12.0x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 145 /* 1111 -> 14.5x */
+ /* end of table */
+};
+static int __initdata nehemiah_b_eblcr[32] = {
+ 50, /* 0000 -> 5.0x */
+ 160, /* 0001 -> 16.0x */
+ -1, /* 0010 -> RESERVED */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ -1, /* 0101 -> RESERVED */
+ -1, /* 0110 -> RESERVED */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+ 90, /* 0000 -> 9.0x */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ 100, /* 0011 -> 10.0x */
+ 135, /* 0100 -> 13.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 105, /* 0111 -> 10.5x */
+ 130, /* 1000 -> 13.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 140, /* 1011 -> 14.0x */
+ 120, /* 1100 -> 12.0x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 145 /* 1111 -> 14.5x */
+ /* end of table */
+};
+static int __initdata nehemiah_c_eblcr[32] = {
+ 50, /* 0000 -> 5.0x */
+ 160, /* 0001 -> 16.0x */
+ 40, /* 0010 -> RESERVED */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ -1, /* 0101 -> RESERVED */
+ 45, /* 0110 -> RESERVED */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+ 90, /* 0000 -> 9.0x */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ 100, /* 0011 -> 10.0x */
+ 135, /* 0100 -> 13.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 105, /* 0111 -> 10.5x */
+ 130, /* 1000 -> 13.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 140, /* 1011 -> 14.0x */
+ 120, /* 1100 -> 12.0x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 145 /* 1111 -> 14.5x */
+ /* end of table */
+};
+
+/*
+ * Voltage scales. Div/Mod by 1000 to get actual voltage.
+ * Which scale to use depends on the VRM type in use.
+ */
+static int __initdata vrm85scales[32] = {
+ 1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
+ 1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
+ 1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
+ 1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
+};
+
+static int __initdata mobilevrmscales[32] = {
+ 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+ 1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
+ 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+ 1075, 1050, 1025, 1000, 975, 950, 925, -1,
+};
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/i386/kernel/cpu/cpufreq/longrun.c
new file mode 100644
index 0000000..e3868de
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longrun.c
@@ -0,0 +1,326 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
+
+static struct cpufreq_driver longrun_driver;
+
+/**
+ * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
+ * values into per cent values. In TMTA microcode, the following is valid:
+ * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int longrun_low_freq, longrun_high_freq;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void __init longrun_get_policy(struct cpufreq_policy *policy)
+{
+ u32 msr_lo, msr_hi;
+
+ rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+ dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
+ if (msr_lo & 0x01)
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ else
+ policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+ rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+ dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+ msr_lo &= 0x0000007F;
+ msr_hi &= 0x0000007F;
+
+ if ( longrun_high_freq <= longrun_low_freq ) {
+ /* Assume degenerate Longrun table */
+ policy->min = policy->max = longrun_high_freq;
+ } else {
+ policy->min = longrun_low_freq + msr_lo *
+ ((longrun_high_freq - longrun_low_freq) / 100);
+ policy->max = longrun_low_freq + msr_hi *
+ ((longrun_high_freq - longrun_low_freq) / 100);
+ }
+ policy->cpu = 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static int longrun_set_policy(struct cpufreq_policy *policy)
+{
+ u32 msr_lo, msr_hi;
+ u32 pctg_lo, pctg_hi;
+
+ if (!policy)
+ return -EINVAL;
+
+ if ( longrun_high_freq <= longrun_low_freq ) {
+ /* Assume degenerate Longrun table */
+ pctg_lo = pctg_hi = 100;
+ } else {
+ pctg_lo = (policy->min - longrun_low_freq) /
+ ((longrun_high_freq - longrun_low_freq) / 100);
+ pctg_hi = (policy->max - longrun_low_freq) /
+ ((longrun_high_freq - longrun_low_freq) / 100);
+ }
+
+ if (pctg_hi > 100)
+ pctg_hi = 100;
+ if (pctg_lo > pctg_hi)
+ pctg_lo = pctg_hi;
+
+ /* performance or economy mode */
+ rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+ msr_lo &= 0xFFFFFFFE;
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_PERFORMANCE:
+ msr_lo |= 0x00000001;
+ break;
+ case CPUFREQ_POLICY_POWERSAVE:
+ break;
+ }
+ wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+ /* lower and upper boundary */
+ rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+ msr_lo &= 0xFFFFFF80;
+ msr_hi &= 0xFFFFFF80;
+ msr_lo |= pctg_lo;
+ msr_hi |= pctg_hi;
+ wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+ return 0;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ * @policy: the policy to verify
+ *
+ * Validates a new CPUFreq policy. This function has to be called with
+ * cpufreq_driver locked.
+ */
+static int longrun_verify_policy(struct cpufreq_policy *policy)
+{
+ if (!policy)
+ return -EINVAL;
+
+ policy->cpu = 0;
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+ (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+ return -EINVAL;
+
+ return 0;
+}
+
+static unsigned int longrun_get(unsigned int cpu)
+{
+ u32 eax, ebx, ecx, edx;
+
+ if (cpu)
+ return 0;
+
+ cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+ dprintk("cpuid eax is %u\n", eax);
+
+ return (eax * 1000);
+}
+
+/**
+ * longrun_determine_freqs - determines the lowest and highest possible core frequency
+ * @low_freq: an int to put the lowest frequency into
+ * @high_freq: an int to put the highest frequency into
+ *
+ * Determines the lowest and highest possible core frequencies on this CPU.
+ * This is necessary to calculate the performance percentage according to
+ * TMTA rules:
+ * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
+ unsigned int *high_freq)
+{
+ u32 msr_lo, msr_hi;
+ u32 save_lo, save_hi;
+ u32 eax, ebx, ecx, edx;
+ u32 try_hi;
+ struct cpuinfo_x86 *c = cpu_data;
+
+ if (!low_freq || !high_freq)
+ return -EINVAL;
+
+ if (cpu_has(c, X86_FEATURE_LRTI)) {
+ /* if the LongRun Table Interface is present, the
+ * detection is a bit easier:
+ * For minimum frequency, read out the maximum
+ * level (msr_hi), write that into "currently
+ * selected level", and read out the frequency.
+ * For maximum frequency, read out level zero.
+ */
+ /* minimum */
+ rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
+ wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
+ rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+ *low_freq = msr_lo * 1000; /* to kHz */
+
+ /* maximum */
+ wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
+ rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+ *high_freq = msr_lo * 1000; /* to kHz */
+
+ dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
+
+ if (*low_freq > *high_freq)
+ *low_freq = *high_freq;
+ return 0;
+ }
+
+ /* set the upper border to the value determined during TSC init */
+ *high_freq = (cpu_khz / 1000);
+ *high_freq = *high_freq * 1000;
+ dprintk("high frequency is %u kHz\n", *high_freq);
+
+ /* get current borders */
+ rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+ save_lo = msr_lo & 0x0000007F;
+ save_hi = msr_hi & 0x0000007F;
+
+ /* if current perf_pctg is larger than 90%, we need to decrease the
+ * upper limit to make the calculation more accurate.
+ */
+ cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+ /* try decreasing in 10% steps, some processors react only
+ * on some barrier values */
+ for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) {
+ /* set to 0 to try_hi perf_pctg */
+ msr_lo &= 0xFFFFFF80;
+ msr_hi &= 0xFFFFFF80;
+ msr_lo |= 0;
+ msr_hi |= try_hi;
+ wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+ /* read out current core MHz and current perf_pctg */
+ cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+
+ /* restore values */
+ wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
+ }
+ dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+
+ /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ * eqals
+ * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+ *
+ * high_freq * perf_pctg is stored tempoarily into "ebx".
+ */
+ ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
+
+ if ((ecx > 95) || (ecx == 0) || (eax < ebx))
+ return -EIO;
+
+ edx = (eax - ebx) / (100 - ecx);
+ *low_freq = edx * 1000; /* back to kHz */
+
+ dprintk("low frequency is %u kHz\n", *low_freq);
+
+ if (*low_freq > *high_freq)
+ *low_freq = *high_freq;
+
+ return 0;
+}
+
+
+static int __init longrun_cpu_init(struct cpufreq_policy *policy)
+{
+ int result = 0;
+
+ /* capability check */
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ /* detect low and high frequency */
+ result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
+ if (result)
+ return result;
+
+ /* cpuinfo and default policy values */
+ policy->cpuinfo.min_freq = longrun_low_freq;
+ policy->cpuinfo.max_freq = longrun_high_freq;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ longrun_get_policy(policy);
+
+ return 0;
+}
+
+
+static struct cpufreq_driver longrun_driver = {
+ .flags = CPUFREQ_CONST_LOOPS,
+ .verify = longrun_verify_policy,
+ .setpolicy = longrun_set_policy,
+ .get = longrun_get,
+ .init = longrun_cpu_init,
+ .name = "longrun",
+ .owner = THIS_MODULE,
+};
+
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
+ !cpu_has(c, X86_FEATURE_LONGRUN))
+ return -ENODEV;
+
+ return cpufreq_register_driver(&longrun_driver);
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+ cpufreq_unregister_driver(&longrun_driver);
+}
+
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longrun_init);
+module_exit(longrun_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
new file mode 100644
index 0000000..aa622d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -0,0 +1,337 @@
+/*
+ * Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ * (C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ * (C) 2002 Tora T. Engstad
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * The author(s) of this software shall not be held liable for damages
+ * of any nature resulting due to the use of this software. This
+ * software is provided AS-IS with no warranties.
+ *
+ * Date Errata Description
+ * 20020525 N44, O17 12.5% or 25% DC causes lockup
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/timex.h>
+
+#include "speedstep-lib.h"
+
+#define PFX "p4-clockmod: "
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+ DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+ DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES 8
+
+
+static int has_N44_O17_errata[NR_CPUS];
+static unsigned int stock_freq;
+static struct cpufreq_driver p4clockmod_driver;
+static unsigned int cpufreq_p4_get(unsigned int cpu);
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+ u32 l, h;
+
+ if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+ return -EINVAL;
+
+ rdmsr(MSR_IA32_THERM_STATUS, l, h);
+
+ if (l & 0x01)
+ dprintk("CPU#%d currently thermal throttled\n", cpu);
+
+ if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+ newstate = DC_38PT;
+
+ rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+ if (newstate == DC_DISABLE) {
+ dprintk("CPU#%d disabling modulation\n", cpu);
+ wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+ } else {
+ dprintk("CPU#%d setting duty cycle to %d%%\n",
+ cpu, ((125 * newstate) / 10));
+ /* bits 63 - 5 : reserved
+ * bit 4 : enable/disable
+ * bits 3-1 : duty cycle
+ * bit 0 : reserved
+ */
+ l = (l & ~14);
+ l = l | (1<<4) | ((newstate & 0x7)<<1);
+ wrmsr(MSR_IA32_THERM_CONTROL, l, h);
+ }
+
+ return 0;
+}
+
+
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+ {DC_RESV, CPUFREQ_ENTRY_INVALID},
+ {DC_DFLT, 0},
+ {DC_25PT, 0},
+ {DC_38PT, 0},
+ {DC_50PT, 0},
+ {DC_64PT, 0},
+ {DC_75PT, 0},
+ {DC_88PT, 0},
+ {DC_DISABLE, 0},
+ {DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
+static int cpufreq_p4_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = DC_RESV;
+ struct cpufreq_freqs freqs;
+ cpumask_t cpus_allowed;
+ int i;
+
+ if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+ return -EINVAL;
+
+ freqs.old = cpufreq_p4_get(policy->cpu);
+ freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
+
+ if (freqs.new == freqs.old)
+ return 0;
+
+ /* notifiers */
+ for_each_cpu_mask(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+ * Developer's Manual, Volume 3
+ */
+ cpus_allowed = current->cpus_allowed;
+
+ for_each_cpu_mask(i, policy->cpus) {
+ cpumask_t this_cpu = cpumask_of_cpu(i);
+
+ set_cpus_allowed(current, this_cpu);
+ BUG_ON(smp_processor_id() != i);
+
+ cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
+ }
+ set_cpus_allowed(current, cpus_allowed);
+
+ /* notifiers */
+ for_each_cpu_mask(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return 0;
+}
+
+
+static int cpufreq_p4_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
+}
+
+
+static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
+{
+ if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
+ /* Pentium M (Banias) */
+ printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+ "The speedstep_centrino module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
+
+ if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
+ /* Pentium M (Dothan) */
+ printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+ "The speedstep_centrino module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ /* on P-4s, the TSC runs with constant frequency independent whether
+ * throttling is active or not. */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
+
+ if (c->x86 != 0xF) {
+ printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+ return 0;
+ }
+
+ /* on P-4s, the TSC runs with constant frequency independent whether
+ * throttling is active or not. */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+ if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+ printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
+ "The speedstep-ich or acpi cpufreq modules offer "
+ "voltage scaling in addition of frequency scaling. "
+ "You should use either one instead of p4-clockmod, "
+ "if possible.\n");
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+ }
+
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+}
+
+
+
+static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
+ int cpuid = 0;
+ unsigned int i;
+
+#ifdef CONFIG_SMP
+ policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+ /* Errata workaround */
+ cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+ switch (cpuid) {
+ case 0x0f07:
+ case 0x0f0a:
+ case 0x0f11:
+ case 0x0f12:
+ has_N44_O17_errata[policy->cpu] = 1;
+ dprintk("has errata -- disabling low frequencies\n");
+ }
+
+ /* get max frequency */
+ stock_freq = cpufreq_p4_get_frequency(c);
+ if (!stock_freq)
+ return -EINVAL;
+
+ /* table init */
+ for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+ p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else
+ p4clockmod_table[i].frequency = (stock_freq * i)/8;
+ }
+ cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = 1000000; /* assumed */
+ policy->cur = stock_freq;
+
+ return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
+}
+
+
+static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static unsigned int cpufreq_p4_get(unsigned int cpu)
+{
+ cpumask_t cpus_allowed;
+ u32 l, h;
+
+ cpus_allowed = current->cpus_allowed;
+
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ BUG_ON(smp_processor_id() != cpu);
+
+ rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+
+ set_cpus_allowed(current, cpus_allowed);
+
+ if (l & 0x10) {
+ l = l >> 1;
+ l &= 0x7;
+ } else
+ l = DC_DISABLE;
+
+ if (l != DC_DISABLE)
+ return (stock_freq * l / 8);
+
+ return stock_freq;
+}
+
+static struct freq_attr* p4clockmod_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver p4clockmod_driver = {
+ .verify = cpufreq_p4_verify,
+ .target = cpufreq_p4_target,
+ .init = cpufreq_p4_cpu_init,
+ .exit = cpufreq_p4_cpu_exit,
+ .get = cpufreq_p4_get,
+ .name = "p4-clockmod",
+ .owner = THIS_MODULE,
+ .attr = p4clockmod_attr,
+};
+
+
+static int __init cpufreq_p4_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ int ret;
+
+ /*
+ * THERM_CONTROL is architectural for IA32 now, so
+ * we can rely on the capability checks
+ */
+ if (c->x86_vendor != X86_VENDOR_INTEL)
+ return -ENODEV;
+
+ if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) ||
+ !test_bit(X86_FEATURE_ACC, c->x86_capability))
+ return -ENODEV;
+
+ ret = cpufreq_register_driver(&p4clockmod_driver);
+ if (!ret)
+ printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+
+ return (ret);
+}
+
+
+static void __exit cpufreq_p4_exit(void)
+{
+ cpufreq_unregister_driver(&p4clockmod_driver);
+}
+
+
+MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE ("GPL");
+
+late_initcall(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
new file mode 100644
index 0000000..222f8cf
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
@@ -0,0 +1,256 @@
+/*
+ * This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
+ * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski.
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+
+#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
+ as it is unused */
+
+static unsigned int busfreq; /* FSB, in 10 kHz */
+static unsigned int max_multiplier;
+
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static struct cpufreq_frequency_table clock_ratio[] = {
+ {45, /* 000 -> 4.5x */ 0},
+ {50, /* 001 -> 5.0x */ 0},
+ {40, /* 010 -> 4.0x */ 0},
+ {55, /* 011 -> 5.5x */ 0},
+ {20, /* 100 -> 2.0x */ 0},
+ {30, /* 101 -> 3.0x */ 0},
+ {60, /* 110 -> 6.0x */ 0},
+ {35, /* 111 -> 3.5x */ 0},
+ {0, CPUFREQ_TABLE_END}
+};
+
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ * Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+ u64 invalue = 0;
+ u32 msrval;
+
+ msrval = POWERNOW_IOPORT + 0x1;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+ invalue=inl(POWERNOW_IOPORT + 0x8);
+ msrval = POWERNOW_IOPORT + 0x0;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+ return clock_ratio[(invalue >> 5)&7].index;
+}
+
+
+/**
+ * powernow_k6_set_state - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ * Tries to change the PowerNow! multiplier
+ */
+static void powernow_k6_set_state (unsigned int best_i)
+{
+ unsigned long outvalue=0, invalue=0;
+ unsigned long msrval;
+ struct cpufreq_freqs freqs;
+
+ if (clock_ratio[best_i].index > max_multiplier) {
+ printk(KERN_ERR "cpufreq: invalid target frequency\n");
+ return;
+ }
+
+ freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
+ freqs.new = busfreq * clock_ratio[best_i].index;
+ freqs.cpu = 0; /* powernow-k6.c is UP only driver */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+ outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+ msrval = POWERNOW_IOPORT + 0x1;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+ invalue=inl(POWERNOW_IOPORT + 0x8);
+ invalue = invalue & 0xf;
+ outvalue = outvalue | invalue;
+ outl(outvalue ,(POWERNOW_IOPORT + 0x8));
+ msrval = POWERNOW_IOPORT + 0x0;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return;
+}
+
+
+/**
+ * powernow_k6_verify - verifies a new CPUfreq policy
+ * @policy: new policy
+ *
+ * Policy must be within lowest and highest possible CPU Frequency,
+ * and at least one possible state must be within min and max.
+ */
+static int powernow_k6_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
+}
+
+
+/**
+ * powernow_k6_setpolicy - sets a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * sets a new CPUFreq policy
+ */
+static int powernow_k6_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
+ return -EINVAL;
+
+ powernow_k6_set_state(newstate);
+
+ return 0;
+}
+
+
+static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int i;
+ int result;
+
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ /* get frequencies */
+ max_multiplier = powernow_k6_get_cpu_multiplier();
+ busfreq = cpu_khz / max_multiplier;
+
+ /* table init */
+ for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].index > max_multiplier)
+ clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else
+ clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+ }
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = busfreq * max_multiplier;
+
+ result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
+
+ return 0;
+}
+
+
+static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
+{
+ unsigned int i;
+ for (i=0; i<8; i++) {
+ if (i==max_multiplier)
+ powernow_k6_set_state(i);
+ }
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static unsigned int powernow_k6_get(unsigned int cpu)
+{
+ return busfreq * powernow_k6_get_cpu_multiplier();
+}
+
+static struct freq_attr* powernow_k6_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver powernow_k6_driver = {
+ .verify = powernow_k6_verify,
+ .target = powernow_k6_target,
+ .init = powernow_k6_cpu_init,
+ .exit = powernow_k6_cpu_exit,
+ .get = powernow_k6_get,
+ .name = "powernow-k6",
+ .owner = THIS_MODULE,
+ .attr = powernow_k6_attr,
+};
+
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
+ ((c->x86_model != 12) && (c->x86_model != 13)))
+ return -ENODEV;
+
+ if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+ printk("cpufreq: PowerNow IOPORT region already used.\n");
+ return -EIO;
+ }
+
+ if (cpufreq_register_driver(&powernow_k6_driver)) {
+ release_region (POWERNOW_IOPORT, 16);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ * Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+ cpufreq_unregister_driver(&powernow_k6_driver);
+ release_region (POWERNOW_IOPORT, 16);
+}
+
+
+MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
new file mode 100644
index 0000000..913f652
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -0,0 +1,690 @@
+/*
+ * AMD K7 Powernow driver.
+ * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs.
+ * (C) 2003-2004 Dave Jones <davej@redhat.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
+ * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
+ * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include "powernow-k7.h"
+
+#define PFX "powernow: "
+
+
+struct psb_s {
+ u8 signature[10];
+ u8 tableversion;
+ u8 flags;
+ u16 settlingtime;
+ u8 reserved1;
+ u8 numpst;
+};
+
+struct pst_s {
+ u32 cpuid;
+ u8 fsbspeed;
+ u8 maxfid;
+ u8 startvid;
+ u8 numpstates;
+};
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+union powernow_acpi_control_t {
+ struct {
+ unsigned long fid:5,
+ vid:5,
+ sgtc:20,
+ res1:2;
+ } bits;
+ unsigned long val;
+};
+#endif
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+/* divide by 1000 to get VCore voltage in V. */
+static int mobile_vid_table[32] = {
+ 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+ 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+ 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+ 1075, 1050, 1025, 1000, 975, 950, 925, 0,
+};
+#endif
+
+/* divide by 10 to get FID. */
+static int fid_codes[32] = {
+ 110, 115, 120, 125, 50, 55, 60, 65,
+ 70, 75, 80, 85, 90, 95, 100, 105,
+ 30, 190, 40, 200, 130, 135, 140, 210,
+ 150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+/* This parameter is used in order to force ACPI instead of legacy method for
+ * configuration purpose.
+ */
+
+static int acpi_force;
+
+static struct cpufreq_frequency_table *powernow_table;
+
+static unsigned int can_scale_bus;
+static unsigned int can_scale_vid;
+static unsigned int minimum_speed=-1;
+static unsigned int maximum_speed;
+static unsigned int number_scales;
+static unsigned int fsb;
+static unsigned int latency;
+static char have_a0;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
+
+static int check_fsb(unsigned int fsbspeed)
+{
+ int delta;
+ unsigned int f = fsb / 1000;
+
+ delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
+ return (delta < 5);
+}
+
+static int check_powernow(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ unsigned int maxei, eax, ebx, ecx, edx;
+
+ if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+#ifdef MODULE
+ printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+#endif
+ return 0;
+ }
+
+ /* Get maximum capabilities */
+ maxei = cpuid_eax (0x80000000);
+ if (maxei < 0x80000007) { /* Any powernow info ? */
+#ifdef MODULE
+ printk (KERN_INFO PFX "No powernow capabilities detected\n");
+#endif
+ return 0;
+ }
+
+ if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+ printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
+ have_a0 = 1;
+ }
+
+ cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+ /* Check we can actually do something before we say anything.*/
+ if (!(edx & (1 << 1 | 1 << 2)))
+ return 0;
+
+ printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+
+ if (edx & 1 << 1) {
+ printk ("frequency");
+ can_scale_bus=1;
+ }
+
+ if ((edx & (1 << 1 | 1 << 2)) == 0x6)
+ printk (" and ");
+
+ if (edx & 1 << 2) {
+ printk ("voltage");
+ can_scale_vid=1;
+ }
+
+ printk (".\n");
+ return 1;
+}
+
+
+static int get_ranges (unsigned char *pst)
+{
+ unsigned int j;
+ unsigned int speed;
+ u8 fid, vid;
+
+ powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+ if (!powernow_table)
+ return -ENOMEM;
+ memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1)));
+
+ for (j=0 ; j < number_scales; j++) {
+ fid = *pst++;
+
+ powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
+ powernow_table[j].index = fid; /* lower 8 bits */
+
+ speed = powernow_table[j].frequency;
+
+ if ((fid_codes[fid] % 10)==5) {
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+ if (have_a0 == 1)
+ powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
+#endif
+ }
+
+ if (speed < minimum_speed)
+ minimum_speed = speed;
+ if (speed > maximum_speed)
+ maximum_speed = speed;
+
+ vid = *pst++;
+ powernow_table[j].index |= (vid << 8); /* upper 8 bits */
+
+ dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
+ "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+ fid_codes[fid] % 10, speed/1000, vid,
+ mobile_vid_table[vid]/1000,
+ mobile_vid_table[vid]%1000);
+ }
+ powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
+ powernow_table[number_scales].index = 0;
+
+ return 0;
+}
+
+
+static void change_FID(int fid)
+{
+ union msr_fidvidctl fidvidctl;
+
+ rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+ if (fidvidctl.bits.FID != fid) {
+ fidvidctl.bits.SGTC = latency;
+ fidvidctl.bits.FID = fid;
+ fidvidctl.bits.VIDC = 0;
+ fidvidctl.bits.FIDC = 1;
+ wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+ }
+}
+
+
+static void change_VID(int vid)
+{
+ union msr_fidvidctl fidvidctl;
+
+ rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+ if (fidvidctl.bits.VID != vid) {
+ fidvidctl.bits.SGTC = latency;
+ fidvidctl.bits.VID = vid;
+ fidvidctl.bits.FIDC = 0;
+ fidvidctl.bits.VIDC = 1;
+ wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+ }
+}
+
+
+static void change_speed (unsigned int index)
+{
+ u8 fid, vid;
+ struct cpufreq_freqs freqs;
+ union msr_fidvidstatus fidvidstatus;
+ int cfid;
+
+ /* fid are the lower 8 bits of the index we stored into
+ * the cpufreq frequency table in powernow_decode_bios,
+ * vid are the upper 8 bits.
+ */
+
+ fid = powernow_table[index].index & 0xFF;
+ vid = (powernow_table[index].index & 0xFF00) >> 8;
+
+ freqs.cpu = 0;
+
+ rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+ cfid = fidvidstatus.bits.CFID;
+ freqs.old = fsb * fid_codes[cfid] / 10;
+
+ freqs.new = powernow_table[index].frequency;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* Now do the magic poking into the MSRs. */
+
+ if (have_a0 == 1) /* A0 errata 5 */
+ local_irq_disable();
+
+ if (freqs.old > freqs.new) {
+ /* Going down, so change FID first */
+ change_FID(fid);
+ change_VID(vid);
+ } else {
+ /* Going up, so change VID first */
+ change_VID(vid);
+ change_FID(fid);
+ }
+
+
+ if (have_a0 == 1)
+ local_irq_enable();
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+
+static struct acpi_processor_performance *acpi_processor_perf;
+
+static int powernow_acpi_init(void)
+{
+ int i;
+ int retval = 0;
+ union powernow_acpi_control_t pc;
+
+ if (acpi_processor_perf != NULL && powernow_table != NULL) {
+ retval = -EINVAL;
+ goto err0;
+ }
+
+ acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
+
+ if (!acpi_processor_perf) {
+ retval = -ENOMEM;
+ goto err0;
+ }
+
+ memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance));
+
+ if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
+ retval = -EIO;
+ goto err1;
+ }
+
+ if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+ retval = -ENODEV;
+ goto err2;
+ }
+
+ if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+ retval = -ENODEV;
+ goto err2;
+ }
+
+ number_scales = acpi_processor_perf->state_count;
+
+ if (number_scales < 2) {
+ retval = -ENODEV;
+ goto err2;
+ }
+
+ powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+ if (!powernow_table) {
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table)));
+
+ pc.val = (unsigned long) acpi_processor_perf->states[0].control;
+ for (i = 0; i < number_scales; i++) {
+ u8 fid, vid;
+ unsigned int speed;
+
+ pc.val = (unsigned long) acpi_processor_perf->states[i].control;
+ dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+ i,
+ (u32) acpi_processor_perf->states[i].core_frequency,
+ (u32) acpi_processor_perf->states[i].power,
+ (u32) acpi_processor_perf->states[i].transition_latency,
+ (u32) acpi_processor_perf->states[i].control,
+ pc.bits.sgtc);
+
+ vid = pc.bits.vid;
+ fid = pc.bits.fid;
+
+ powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
+ powernow_table[i].index = fid; /* lower 8 bits */
+ powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+
+ speed = powernow_table[i].frequency;
+
+ if ((fid_codes[fid] % 10)==5) {
+ if (have_a0 == 1)
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
+ "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+ fid_codes[fid] % 10, speed/1000, vid,
+ mobile_vid_table[vid]/1000,
+ mobile_vid_table[vid]%1000);
+
+ if (latency < pc.bits.sgtc)
+ latency = pc.bits.sgtc;
+
+ if (speed < minimum_speed)
+ minimum_speed = speed;
+ if (speed > maximum_speed)
+ maximum_speed = speed;
+ }
+
+ powernow_table[i].frequency = CPUFREQ_TABLE_END;
+ powernow_table[i].index = 0;
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ return 0;
+
+err2:
+ acpi_processor_unregister_performance(acpi_processor_perf, 0);
+err1:
+ kfree(acpi_processor_perf);
+err0:
+ printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
+ acpi_processor_perf = NULL;
+ return retval;
+}
+#else
+static int powernow_acpi_init(void)
+{
+ printk(KERN_INFO PFX "no support for ACPI processor found."
+ " Please recompile your kernel with ACPI processor\n");
+ return -EINVAL;
+}
+#endif
+
+static int powernow_decode_bios (int maxfid, int startvid)
+{
+ struct psb_s *psb;
+ struct pst_s *pst;
+ unsigned int i, j;
+ unsigned char *p;
+ unsigned int etuple;
+ unsigned int ret;
+
+ etuple = cpuid_eax(0x80000001);
+
+ for (i=0xC0000; i < 0xffff0 ; i+=16) {
+
+ p = phys_to_virt(i);
+
+ if (memcmp(p, "AMDK7PNOW!", 10) == 0){
+ dprintk ("Found PSB header at %p\n", p);
+ psb = (struct psb_s *) p;
+ dprintk ("Table version: 0x%x\n", psb->tableversion);
+ if (psb->tableversion != 0x12) {
+ printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
+ return -ENODEV;
+ }
+
+ dprintk ("Flags: 0x%x\n", psb->flags);
+ if ((psb->flags & 1)==0) {
+ dprintk ("Mobile voltage regulator\n");
+ } else {
+ dprintk ("Desktop voltage regulator\n");
+ }
+
+ latency = psb->settlingtime;
+ if (latency < 100) {
+ printk (KERN_INFO PFX "BIOS set settling time to %d microseconds."
+ "Should be at least 100. Correcting.\n", latency);
+ latency = 100;
+ }
+ dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
+ dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
+
+ p += sizeof (struct psb_s);
+
+ pst = (struct pst_s *) p;
+
+ for (i = 0 ; i <psb->numpst; i++) {
+ pst = (struct pst_s *) p;
+ number_scales = pst->numpstates;
+
+ if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
+ (maxfid==pst->maxfid) && (startvid==pst->startvid))
+ {
+ dprintk ("PST:%d (@%p)\n", i, pst);
+ dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
+ pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+
+ ret = get_ranges ((char *) pst + sizeof (struct pst_s));
+ return ret;
+
+ } else {
+ p = (char *) pst + sizeof (struct pst_s);
+ for (j=0 ; j < number_scales; j++)
+ p+=2;
+ }
+ }
+ printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
+ printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
+
+ return -EINVAL;
+ }
+ p++;
+ }
+
+ return -ENODEV;
+}
+
+
+static int powernow_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate;
+
+ if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
+ return -EINVAL;
+
+ change_speed(newstate);
+
+ return 0;
+}
+
+
+static int powernow_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, powernow_table);
+}
+
+/*
+ * We use the fact that the bus frequency is somehow
+ * a multiple of 100000/3 khz, then we compute sgtc according
+ * to this multiple.
+ * That way, we match more how AMD thinks all of that work.
+ * We will then get the same kind of behaviour already tested under
+ * the "well-known" other OS.
+ */
+static int __init fixup_sgtc(void)
+{
+ unsigned int sgtc;
+ unsigned int m;
+
+ m = fsb / 3333;
+ if ((m % 10) >= 5)
+ m += 5;
+
+ m /= 10;
+
+ sgtc = 100 * m * latency;
+ sgtc = sgtc / 3;
+ if (sgtc > 0xfffff) {
+ printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+ sgtc = 0xfffff;
+ }
+ return sgtc;
+}
+
+static unsigned int powernow_get(unsigned int cpu)
+{
+ union msr_fidvidstatus fidvidstatus;
+ unsigned int cfid;
+
+ if (cpu)
+ return 0;
+ rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+ cfid = fidvidstatus.bits.CFID;
+
+ return (fsb * fid_codes[cfid] / 10);
+}
+
+
+static int __init acer_cpufreq_pst(struct dmi_system_id *d)
+{
+ printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
+ printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+ printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
+ return 0;
+}
+
+/*
+ * Some Athlon laptops have really fucked PST tables.
+ * A BIOS update is all that can save them.
+ * Mention this, and disable cpufreq.
+ */
+static struct dmi_system_id __initdata powernow_dmi_table[] = {
+ {
+ .callback = acer_cpufreq_pst,
+ .ident = "Acer Aspire",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
+ DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
+ },
+ },
+ { }
+};
+
+static int __init powernow_cpu_init (struct cpufreq_policy *policy)
+{
+ union msr_fidvidstatus fidvidstatus;
+ int result;
+
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+
+ /* A K7 with powernow technology is set to max frequency by BIOS */
+ fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+ if (!fsb) {
+ printk(KERN_WARNING PFX "can not determine bus frequency\n");
+ return -EINVAL;
+ }
+ dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+
+ if (dmi_check_system(powernow_dmi_table) || acpi_force) {
+ printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n");
+ result = powernow_acpi_init();
+ } else {
+ result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
+ if (result) {
+ printk (KERN_INFO PFX "Trying ACPI perflib\n");
+ maximum_speed = 0;
+ minimum_speed = -1;
+ latency = 0;
+ result = powernow_acpi_init();
+ if (result) {
+ printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
+ printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml\n");
+ }
+ } else {
+ /* SGTC use the bus clock as timer */
+ latency = fixup_sgtc();
+ printk(KERN_INFO PFX "SGTC: %d\n", latency);
+ }
+ }
+
+ if (result)
+ return result;
+
+ printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+ minimum_speed/1000, maximum_speed/1000);
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
+
+ policy->cur = powernow_get(0);
+
+ cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
+
+ return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
+}
+
+static int powernow_cpu_exit (struct cpufreq_policy *policy) {
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+ if (acpi_processor_perf) {
+ acpi_processor_unregister_performance(acpi_processor_perf, 0);
+ kfree(acpi_processor_perf);
+ }
+#endif
+
+ if (powernow_table)
+ kfree(powernow_table);
+
+ return 0;
+}
+
+static struct freq_attr* powernow_table_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver powernow_driver = {
+ .verify = powernow_verify,
+ .target = powernow_target,
+ .get = powernow_get,
+ .init = powernow_cpu_init,
+ .exit = powernow_cpu_exit,
+ .name = "powernow-k7",
+ .owner = THIS_MODULE,
+ .attr = powernow_table_attr,
+};
+
+static int __init powernow_init (void)
+{
+ if (check_powernow()==0)
+ return -ENODEV;
+ return cpufreq_register_driver(&powernow_driver);
+}
+
+
+static void __exit powernow_exit (void)
+{
+ cpufreq_unregister_driver(&powernow_driver);
+}
+
+module_param(acpi_force, int, 0444);
+MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(powernow_init);
+module_exit(powernow_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
new file mode 100644
index 0000000..f8a63b3
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
@@ -0,0 +1,44 @@
+/*
+ * $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
+ * (C) 2003 Dave Jones.
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * AMD-specific information
+ *
+ */
+
+union msr_fidvidctl {
+ struct {
+ unsigned FID:5, // 4:0
+ reserved1:3, // 7:5
+ VID:5, // 12:8
+ reserved2:3, // 15:13
+ FIDC:1, // 16
+ VIDC:1, // 17
+ reserved3:2, // 19:18
+ FIDCHGRATIO:1, // 20
+ reserved4:11, // 31-21
+ SGTC:20, // 32:51
+ reserved5:12; // 63:52
+ } bits;
+ unsigned long long val;
+};
+
+union msr_fidvidstatus {
+ struct {
+ unsigned CFID:5, // 4:0
+ reserved1:3, // 7:5
+ SFID:5, // 12:8
+ reserved2:3, // 15:13
+ MFID:5, // 20:16
+ reserved3:11, // 31:21
+ CVID:5, // 36:32
+ reserved4:3, // 39:37
+ SVID:5, // 44:40
+ reserved5:3, // 47:45
+ MVID:5, // 52:48
+ reserved6:11; // 63:53
+ } bits;
+ unsigned long long val;
+};
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
new file mode 100644
index 0000000..a65ff7e
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -0,0 +1,1135 @@
+/*
+ * (c) 2003, 2004 Advanced Micro Devices, Inc.
+ * Your use of this code is subject to the terms and conditions of the
+ * GNU general public license version 2. See "COPYING" or
+ * http://www.gnu.org/licenses/gpl.html
+ *
+ * Support : paul.devriendt@amd.com
+ *
+ * Based on the powernow-k7.c module written by Dave Jones.
+ * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
+ * (C) 2004 Dominik Brodowski <linux@brodo.de>
+ * (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Valuable input gratefully received from Dave Jones, Pavel Machek,
+ * Dominik Brodowski, and others.
+ * Processor information obtained from Chapter 9 (Power and Thermal Management)
+ * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
+ * Opteron Processors" available for download from www.amd.com
+ *
+ * Tables for specific CPUs can be infrerred from
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#define PFX "powernow-k8: "
+#define BFX PFX "BIOS error: "
+#define VERSION "version 1.00.09e"
+#include "powernow-k8.h"
+
+/* serialize freq changes */
+static DECLARE_MUTEX(fidvid_sem);
+
+static struct powernow_k8_data *powernow_data[NR_CPUS];
+
+/* Return a frequency in MHz, given an input fid */
+static u32 find_freq_from_fid(u32 fid)
+{
+ return 800 + (fid * 100);
+}
+
+/* Return a frequency in KHz, given an input fid */
+static u32 find_khz_freq_from_fid(u32 fid)
+{
+ return 1000 * find_freq_from_fid(fid);
+}
+
+/* Return a voltage in miliVolts, given an input vid */
+static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
+{
+ return 1550-vid*25;
+}
+
+/* Return the vco fid for an input fid
+ *
+ * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
+ * only from corresponding high fids. This returns "high" fid corresponding to
+ * "low" one.
+ */
+static u32 convert_fid_to_vco_fid(u32 fid)
+{
+ if (fid < HI_FID_TABLE_BOTTOM) {
+ return 8 + (2 * fid);
+ } else {
+ return fid;
+ }
+}
+
+/*
+ * Return 1 if the pending bit is set. Unless we just instructed the processor
+ * to transition to a new state, seeing this bit set is really bad news.
+ */
+static int pending_bit_stuck(void)
+{
+ u32 lo, hi;
+
+ rdmsr(MSR_FIDVID_STATUS, lo, hi);
+ return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
+}
+
+/*
+ * Update the global current fid / vid values from the status msr.
+ * Returns 1 on error.
+ */
+static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
+{
+ u32 lo, hi;
+ u32 i = 0;
+
+ lo = MSR_S_LO_CHANGE_PENDING;
+ while (lo & MSR_S_LO_CHANGE_PENDING) {
+ if (i++ > 0x1000000) {
+ printk(KERN_ERR PFX "detected change pending stuck\n");
+ return 1;
+ }
+ rdmsr(MSR_FIDVID_STATUS, lo, hi);
+ }
+
+ data->currvid = hi & MSR_S_HI_CURRENT_VID;
+ data->currfid = lo & MSR_S_LO_CURRENT_FID;
+
+ return 0;
+}
+
+/* the isochronous relief time */
+static void count_off_irt(struct powernow_k8_data *data)
+{
+ udelay((1 << data->irt) * 10);
+ return;
+}
+
+/* the voltage stabalization time */
+static void count_off_vst(struct powernow_k8_data *data)
+{
+ udelay(data->vstable * VST_UNITS_20US);
+ return;
+}
+
+/* need to init the control msr to a safe value (for each cpu) */
+static void fidvid_msr_init(void)
+{
+ u32 lo, hi;
+ u8 fid, vid;
+
+ rdmsr(MSR_FIDVID_STATUS, lo, hi);
+ vid = hi & MSR_S_HI_CURRENT_VID;
+ fid = lo & MSR_S_LO_CURRENT_FID;
+ lo = fid | (vid << MSR_C_LO_VID_SHIFT);
+ hi = MSR_C_HI_STP_GNT_BENIGN;
+ dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+ wrmsr(MSR_FIDVID_CTL, lo, hi);
+}
+
+
+/* write the new fid value along with the other control fields to the msr */
+static int write_new_fid(struct powernow_k8_data *data, u32 fid)
+{
+ u32 lo;
+ u32 savevid = data->currvid;
+
+ if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
+ printk(KERN_ERR PFX "internal error - overflow on fid write\n");
+ return 1;
+ }
+
+ lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+ dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+ fid, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+ wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ count_off_irt(data);
+
+ if (savevid != data->currvid) {
+ printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
+ savevid, data->currvid);
+ return 1;
+ }
+
+ if (fid != data->currfid) {
+ printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+ data->currfid);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Write a new vid to the hardware */
+static int write_new_vid(struct powernow_k8_data *data, u32 vid)
+{
+ u32 lo;
+ u32 savefid = data->currfid;
+
+ if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
+ printk(KERN_ERR PFX "internal error - overflow on vid write\n");
+ return 1;
+ }
+
+ lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+ dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+ vid, lo, STOP_GRANT_5NS);
+
+ wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if (savefid != data->currfid) {
+ printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+ savefid, data->currfid);
+ return 1;
+ }
+
+ if (vid != data->currvid) {
+ printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
+ data->currvid);
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Reduce the vid by the max of step or reqvid.
+ * Decreasing vid codes represent increasing voltages:
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ */
+static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+{
+ if ((data->currvid - reqvid) > step)
+ reqvid = data->currvid - step;
+
+ if (write_new_vid(data, reqvid))
+ return 1;
+
+ count_off_vst(data);
+
+ return 0;
+}
+
+/* Change the fid and vid, by the 3 phases. */
+static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+{
+ if (core_voltage_pre_transition(data, reqvid))
+ return 1;
+
+ if (core_frequency_transition(data, reqfid))
+ return 1;
+
+ if (core_voltage_post_transition(data, reqvid))
+ return 1;
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
+ printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+ smp_processor_id(),
+ reqfid, reqvid, data->currfid, data->currvid);
+ return 1;
+ }
+
+ dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+ smp_processor_id(), data->currfid, data->currvid);
+
+ return 0;
+}
+
+/* Phase 1 - core voltage transition ... setup voltage */
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+ u32 rvosteps = data->rvo;
+ u32 savefid = data->currfid;
+
+ dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+ smp_processor_id(),
+ data->currfid, data->currvid, reqvid, data->rvo);
+
+ while (data->currvid > reqvid) {
+ dprintk("ph1: curr 0x%x, req vid 0x%x\n",
+ data->currvid, reqvid);
+ if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
+ return 1;
+ }
+
+ while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ if (data->currvid == 0) {
+ rvosteps = 0;
+ } else {
+ dprintk("ph1: changing vid for rvo, req 0x%x\n",
+ data->currvid - 1);
+ if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+ return 1;
+ rvosteps--;
+ }
+ }
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if (savefid != data->currfid) {
+ printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+ return 1;
+ }
+
+ dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+ data->currfid, data->currvid);
+
+ return 0;
+}
+
+/* Phase 2 - core frequency transition */
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
+{
+ u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+
+ if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+ printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
+ reqfid, data->currfid);
+ return 1;
+ }
+
+ if (data->currfid == reqfid) {
+ printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+ return 0;
+ }
+
+ dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+ smp_processor_id(),
+ data->currfid, data->currvid, reqfid);
+
+ vcoreqfid = convert_fid_to_vco_fid(reqfid);
+ vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+ vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+ : vcoreqfid - vcocurrfid;
+
+ while (vcofiddiff > 2) {
+ if (reqfid > data->currfid) {
+ if (data->currfid > LO_FID_TABLE_TOP) {
+ if (write_new_fid(data, data->currfid + 2)) {
+ return 1;
+ }
+ } else {
+ if (write_new_fid
+ (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+ return 1;
+ }
+ }
+ } else {
+ if (write_new_fid(data, data->currfid - 2))
+ return 1;
+ }
+
+ vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+ vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+ : vcoreqfid - vcocurrfid;
+ }
+
+ if (write_new_fid(data, reqfid))
+ return 1;
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if (data->currfid != reqfid) {
+ printk(KERN_ERR PFX
+ "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+ data->currfid, reqfid);
+ return 1;
+ }
+
+ if (savevid != data->currvid) {
+ printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
+ savevid, data->currvid);
+ return 1;
+ }
+
+ dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+ data->currfid, data->currvid);
+
+ return 0;
+}
+
+/* Phase 3 - core voltage transition flow ... jump to the final vid. */
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+ u32 savefid = data->currfid;
+ u32 savereqvid = reqvid;
+
+ dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+ smp_processor_id(),
+ data->currfid, data->currvid);
+
+ if (reqvid != data->currvid) {
+ if (write_new_vid(data, reqvid))
+ return 1;
+
+ if (savefid != data->currfid) {
+ printk(KERN_ERR PFX
+ "ph3: bad fid change, save 0x%x, curr 0x%x\n",
+ savefid, data->currfid);
+ return 1;
+ }
+
+ if (data->currvid != reqvid) {
+ printk(KERN_ERR PFX
+ "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+ reqvid, data->currvid);
+ return 1;
+ }
+ }
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if (savereqvid != data->currvid) {
+ dprintk("ph3 failed, currvid 0x%x\n", data->currvid);
+ return 1;
+ }
+
+ if (savefid != data->currfid) {
+ dprintk("ph3 failed, currfid changed 0x%x\n",
+ data->currfid);
+ return 1;
+ }
+
+ dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+ data->currfid, data->currvid);
+
+ return 0;
+}
+
+static int check_supported_cpu(unsigned int cpu)
+{
+ cpumask_t oldmask = CPU_MASK_ALL;
+ u32 eax, ebx, ecx, edx;
+ unsigned int rc = 0;
+
+ oldmask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ schedule();
+
+ if (smp_processor_id() != cpu) {
+ printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+ goto out;
+ }
+
+ if (current_cpu_data.x86_vendor != X86_VENDOR_AMD)
+ goto out;
+
+ eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+ if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+ ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+ printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+ goto out;
+ }
+
+ eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+ if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+ printk(KERN_INFO PFX
+ "No frequency change capabilities detected\n");
+ goto out;
+ }
+
+ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+ if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
+ printk(KERN_INFO PFX "Power state transitions not supported\n");
+ goto out;
+ }
+
+ rc = 1;
+
+out:
+ set_cpus_allowed(current, oldmask);
+ schedule();
+ return rc;
+
+}
+
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+ unsigned int j;
+ u8 lastfid = 0xff;
+
+ for (j = 0; j < data->numps; j++) {
+ if (pst[j].vid > LEAST_VID) {
+ printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+ return -EINVAL;
+ }
+ if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */
+ printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+ return -ENODEV;
+ }
+ if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */
+ printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+ return -ENODEV;
+ }
+ if ((pst[j].fid > MAX_FID)
+ || (pst[j].fid & 1)
+ || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+ /* Only first fid is allowed to be in "low" range */
+ printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+ return -EINVAL;
+ }
+ if (pst[j].fid < lastfid)
+ lastfid = pst[j].fid;
+ }
+ if (lastfid & 1) {
+ printk(KERN_ERR PFX "lastfid invalid\n");
+ return -EINVAL;
+ }
+ if (lastfid > LO_FID_TABLE_TOP)
+ printk(KERN_INFO PFX "first fid not from lo freq table\n");
+
+ return 0;
+}
+
+static void print_basics(struct powernow_k8_data *data)
+{
+ int j;
+ for (j = 0; j < data->numps; j++) {
+ if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID)
+ printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x (%d mV)\n", j,
+ data->powernow_table[j].index & 0xff,
+ data->powernow_table[j].frequency/1000,
+ data->powernow_table[j].index >> 8,
+ find_millivolts_from_vid(data, data->powernow_table[j].index >> 8));
+ }
+ if (data->batps)
+ printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+}
+
+static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+ struct cpufreq_frequency_table *powernow_table;
+ unsigned int j;
+
+ if (data->batps) { /* use ACPI support to get full speed on mains power */
+ printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+ data->numps = data->batps;
+ }
+
+ for ( j=1; j<data->numps; j++ ) {
+ if (pst[j-1].fid >= pst[j].fid) {
+ printk(KERN_ERR PFX "PST out of sequence\n");
+ return -EINVAL;
+ }
+ }
+
+ if (data->numps < 2) {
+ printk(KERN_ERR PFX "no p states to transition\n");
+ return -ENODEV;
+ }
+
+ if (check_pst_table(data, pst, maxvid))
+ return -EINVAL;
+
+ powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+ * (data->numps + 1)), GFP_KERNEL);
+ if (!powernow_table) {
+ printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
+ return -ENOMEM;
+ }
+
+ for (j = 0; j < data->numps; j++) {
+ powernow_table[j].index = pst[j].fid; /* lower 8 bits */
+ powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
+ powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+ }
+ powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->numps].index = 0;
+
+ if (query_current_values_with_pending_wait(data)) {
+ kfree(powernow_table);
+ return -EIO;
+ }
+
+ dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+ data->powernow_table = powernow_table;
+ print_basics(data);
+
+ for (j = 0; j < data->numps; j++)
+ if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+ return 0;
+
+ dprintk("currfid/vid do not match PST, ignoring\n");
+ return 0;
+}
+
+/* Find and validate the PSB/PST table in BIOS. */
+static int find_psb_table(struct powernow_k8_data *data)
+{
+ struct psb_s *psb;
+ unsigned int i;
+ u32 mvs;
+ u8 maxvid;
+ u32 cpst = 0;
+ u32 thiscpuid;
+
+ for (i = 0xc0000; i < 0xffff0; i += 0x10) {
+ /* Scan BIOS looking for the signature. */
+ /* It can not be at ffff0 - it is too big. */
+
+ psb = phys_to_virt(i);
+ if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
+ continue;
+
+ dprintk("found PSB header at 0x%p\n", psb);
+
+ dprintk("table vers: 0x%x\n", psb->tableversion);
+ if (psb->tableversion != PSB_VERSION_1_4) {
+ printk(KERN_INFO BFX "PSB table is not v1.4\n");
+ return -ENODEV;
+ }
+
+ dprintk("flags: 0x%x\n", psb->flags1);
+ if (psb->flags1) {
+ printk(KERN_ERR BFX "unknown flags\n");
+ return -ENODEV;
+ }
+
+ data->vstable = psb->vstable;
+ dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+
+ dprintk("flags2: 0x%x\n", psb->flags2);
+ data->rvo = psb->flags2 & 3;
+ data->irt = ((psb->flags2) >> 2) & 3;
+ mvs = ((psb->flags2) >> 4) & 3;
+ data->vidmvs = 1 << mvs;
+ data->batps = ((psb->flags2) >> 6) & 3;
+
+ dprintk("ramp voltage offset: %d\n", data->rvo);
+ dprintk("isochronous relief time: %d\n", data->irt);
+ dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+
+ dprintk("numpst: 0x%x\n", psb->num_tables);
+ cpst = psb->num_tables;
+ if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+ thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+ if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+ cpst = 1;
+ }
+ }
+ if (cpst != 1) {
+ printk(KERN_ERR BFX "numpst must be 1\n");
+ return -ENODEV;
+ }
+
+ data->plllock = psb->plllocktime;
+ dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+ dprintk("maxfid: 0x%x\n", psb->maxfid);
+ dprintk("maxvid: 0x%x\n", psb->maxvid);
+ maxvid = psb->maxvid;
+
+ data->numps = psb->numps;
+ dprintk("numpstates: 0x%x\n", data->numps);
+ return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+ }
+ /*
+ * If you see this message, complain to BIOS manufacturer. If
+ * he tells you "we do not support Linux" or some similar
+ * nonsense, remember that Windows 2000 uses the same legacy
+ * mechanism that the old Linux PSB driver uses. Tell them it
+ * is broken with Windows 2000.
+ *
+ * The reference to the AMD documentation is chapter 9 in the
+ * BIOS and Kernel Developer's Guide, which is available on
+ * www.amd.com
+ */
+ printk(KERN_ERR PFX "BIOS error - no PSB\n");
+ return -ENODEV;
+}
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+{
+ if (!data->acpi_data.state_count)
+ return;
+
+ data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+ data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+ data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+ data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+ data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
+}
+
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+ int i;
+ int cntlofreq = 0;
+ struct cpufreq_frequency_table *powernow_table;
+
+ if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+ dprintk("register performance failed\n");
+ return -EIO;
+ }
+
+ /* verify the data contained in the ACPI structures */
+ if (data->acpi_data.state_count <= 1) {
+ dprintk("No ACPI P-States\n");
+ goto err_out;
+ }
+
+ if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ dprintk("Invalid control/status registers (%x - %x)\n",
+ data->acpi_data.control_register.space_id,
+ data->acpi_data.status_register.space_id);
+ goto err_out;
+ }
+
+ /* fill in data->powernow_table */
+ powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+ * (data->acpi_data.state_count + 1)), GFP_KERNEL);
+ if (!powernow_table) {
+ dprintk("powernow_table memory alloc failure\n");
+ goto err_out;
+ }
+
+ for (i = 0; i < data->acpi_data.state_count; i++) {
+ u32 fid = data->acpi_data.states[i].control & FID_MASK;
+ u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+
+ dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+
+ powernow_table[i].index = fid; /* lower 8 bits */
+ powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+ powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+
+ /* verify frequency is OK */
+ if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
+ (powernow_table[i].frequency < (MIN_FREQ * 1000))) {
+ dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
+ /* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+ if (vid == 0x1f) {
+ dprintk("invalid vid %u, ignoring\n", vid);
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
+ if (fid < HI_FID_TABLE_BOTTOM) {
+ if (cntlofreq) {
+ /* if both entries are the same, ignore this
+ * one...
+ */
+ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+ (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+ printk(KERN_ERR PFX "Too many lo freq table entries\n");
+ goto err_out_mem;
+ }
+
+ dprintk("double low frequency table entry, ignoring it.\n");
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ } else
+ cntlofreq = i;
+ }
+
+ if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+ printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
+ powernow_table[i].frequency,
+ (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+ }
+
+ powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].index = 0;
+ data->powernow_table = powernow_table;
+
+ /* fill in data */
+ data->numps = data->acpi_data.state_count;
+ print_basics(data);
+ powernow_k8_acpi_pst_values(data, 0);
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ return 0;
+
+err_out_mem:
+ kfree(powernow_table);
+
+err_out:
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+ /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+ data->acpi_data.state_count = 0;
+
+ return -ENODEV;
+}
+
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+ if (data->acpi_data.state_count)
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+}
+
+#else
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
+
+/* Take a frequency, and issue the fid/vid transition command */
+static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
+{
+ u32 fid;
+ u32 vid;
+ int res;
+ struct cpufreq_freqs freqs;
+
+ dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+ /* fid are the lower 8 bits of the index we stored into
+ * the cpufreq frequency table in find_psb_table, vid are
+ * the upper 8 bits.
+ */
+
+ fid = data->powernow_table[index].index & 0xFF;
+ vid = (data->powernow_table[index].index & 0xFF00) >> 8;
+
+ dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+
+ if (query_current_values_with_pending_wait(data))
+ return 1;
+
+ if ((data->currvid == vid) && (data->currfid == fid)) {
+ dprintk("target matches current values (fid 0x%x, vid 0x%x)\n",
+ fid, vid);
+ return 0;
+ }
+
+ if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+ printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+ data->currfid, fid);
+ return 1;
+ }
+
+ dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+ smp_processor_id(), fid, vid);
+
+ freqs.cpu = data->cpu;
+
+ freqs.old = find_khz_freq_from_fid(data->currfid);
+ freqs.new = find_khz_freq_from_fid(fid);
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ down(&fidvid_sem);
+ res = transition_fid_vid(data, fid, vid);
+ up(&fidvid_sem);
+
+ freqs.new = find_khz_freq_from_fid(data->currfid);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return res;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+{
+ cpumask_t oldmask = CPU_MASK_ALL;
+ struct powernow_k8_data *data = powernow_data[pol->cpu];
+ u32 checkfid = data->currfid;
+ u32 checkvid = data->currvid;
+ unsigned int newstate;
+ int ret = -EIO;
+
+ /* only run on specific CPU from here on */
+ oldmask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+ schedule();
+
+ if (smp_processor_id() != pol->cpu) {
+ printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ goto err_out;
+ }
+
+ if (pending_bit_stuck()) {
+ printk(KERN_ERR PFX "failing targ, change pending bit set\n");
+ goto err_out;
+ }
+
+ dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+ pol->cpu, targfreq, pol->min, pol->max, relation);
+
+ if (query_current_values_with_pending_wait(data)) {
+ ret = -EIO;
+ goto err_out;
+ }
+
+ dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+ data->currfid, data->currvid);
+
+ if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+ printk(KERN_ERR PFX
+ "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
+ checkfid, data->currfid, checkvid, data->currvid);
+ }
+
+ if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+ goto err_out;
+
+ powernow_k8_acpi_pst_values(data, newstate);
+
+ if (transition_frequency(data, newstate)) {
+ printk(KERN_ERR PFX "transition frequency failed\n");
+ ret = 1;
+ goto err_out;
+ }
+
+ pol->cur = find_khz_freq_from_fid(data->currfid);
+ ret = 0;
+
+err_out:
+ set_cpus_allowed(current, oldmask);
+ schedule();
+
+ return ret;
+}
+
+/* Driver entry point to verify the policy and range of frequencies */
+static int powernowk8_verify(struct cpufreq_policy *pol)
+{
+ struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+ return cpufreq_frequency_table_verify(pol, data->powernow_table);
+}
+
+/* per CPU init entry point to the driver */
+static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
+{
+ struct powernow_k8_data *data;
+ cpumask_t oldmask = CPU_MASK_ALL;
+ int rc;
+
+ if (!check_supported_cpu(pol->cpu))
+ return -ENODEV;
+
+ data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
+ return -ENOMEM;
+ }
+ memset(data,0,sizeof(struct powernow_k8_data));
+
+ data->cpu = pol->cpu;
+
+ if (powernow_k8_cpu_init_acpi(data)) {
+ /*
+ * Use the PSB BIOS structure. This is only availabe on
+ * an UP version, and is deprecated by AMD.
+ */
+
+ if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
+ printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+ kfree(data);
+ return -ENODEV;
+ }
+ if (pol->cpu != 0) {
+ printk(KERN_ERR PFX "init not cpu 0\n");
+ kfree(data);
+ return -ENODEV;
+ }
+ rc = find_psb_table(data);
+ if (rc) {
+ kfree(data);
+ return -ENODEV;
+ }
+ }
+
+ /* only run on specific CPU from here on */
+ oldmask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+ schedule();
+
+ if (smp_processor_id() != pol->cpu) {
+ printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ goto err_out;
+ }
+
+ if (pending_bit_stuck()) {
+ printk(KERN_ERR PFX "failing init, change pending bit set\n");
+ goto err_out;
+ }
+
+ if (query_current_values_with_pending_wait(data))
+ goto err_out;
+
+ fidvid_msr_init();
+
+ /* run on any CPU again */
+ set_cpus_allowed(current, oldmask);
+ schedule();
+
+ pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* Take a crude guess here.
+ * That guess was in microseconds, so multiply with 1000 */
+ pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+ + (3 * (1 << data->irt) * 10)) * 1000;
+
+ pol->cur = find_khz_freq_from_fid(data->currfid);
+ dprintk("policy current frequency %d kHz\n", pol->cur);
+
+ /* min/max the cpu is capable of */
+ if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
+ printk(KERN_ERR PFX "invalid powernow_table\n");
+ powernow_k8_cpu_exit_acpi(data);
+ kfree(data->powernow_table);
+ kfree(data);
+ return -EINVAL;
+ }
+
+ cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
+
+ printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+ data->currfid, data->currvid);
+
+ powernow_data[pol->cpu] = data;
+
+ return 0;
+
+err_out:
+ set_cpus_allowed(current, oldmask);
+ schedule();
+ powernow_k8_cpu_exit_acpi(data);
+
+ kfree(data);
+ return -ENODEV;
+}
+
+static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+{
+ struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+ if (!data)
+ return -EINVAL;
+
+ powernow_k8_cpu_exit_acpi(data);
+
+ cpufreq_frequency_table_put_attr(pol->cpu);
+
+ kfree(data->powernow_table);
+ kfree(data);
+
+ return 0;
+}
+
+static unsigned int powernowk8_get (unsigned int cpu)
+{
+ struct powernow_k8_data *data = powernow_data[cpu];
+ cpumask_t oldmask = current->cpus_allowed;
+ unsigned int khz = 0;
+
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (smp_processor_id() != cpu) {
+ printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu);
+ set_cpus_allowed(current, oldmask);
+ return 0;
+ }
+ preempt_disable();
+
+ if (query_current_values_with_pending_wait(data))
+ goto out;
+
+ khz = find_khz_freq_from_fid(data->currfid);
+
+ out:
+ preempt_enable_no_resched();
+ set_cpus_allowed(current, oldmask);
+
+ return khz;
+}
+
+static struct freq_attr* powernow_k8_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver cpufreq_amd64_driver = {
+ .verify = powernowk8_verify,
+ .target = powernowk8_target,
+ .init = powernowk8_cpu_init,
+ .exit = __devexit_p(powernowk8_cpu_exit),
+ .get = powernowk8_get,
+ .name = "powernow-k8",
+ .owner = THIS_MODULE,
+ .attr = powernow_k8_attr,
+};
+
+/* driver entry point for init */
+static int __init powernowk8_init(void)
+{
+ unsigned int i, supported_cpus = 0;
+
+ for (i=0; i<NR_CPUS; i++) {
+ if (!cpu_online(i))
+ continue;
+ if (check_supported_cpu(i))
+ supported_cpus++;
+ }
+
+ if (supported_cpus == num_online_cpus()) {
+ printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron processors (" VERSION ")\n",
+ supported_cpus);
+ return cpufreq_register_driver(&cpufreq_amd64_driver);
+ }
+
+ return -ENODEV;
+}
+
+/* driver entry point for term */
+static void __exit powernowk8_exit(void)
+{
+ dprintk("exit\n");
+
+ cpufreq_unregister_driver(&cpufreq_amd64_driver);
+}
+
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernowk8_init);
+module_exit(powernowk8_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
new file mode 100644
index 0000000..63ebc84
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -0,0 +1,176 @@
+/*
+ * (c) 2003, 2004 Advanced Micro Devices, Inc.
+ * Your use of this code is subject to the terms and conditions of the
+ * GNU general public license version 2. See "COPYING" or
+ * http://www.gnu.org/licenses/gpl.html
+ */
+
+struct powernow_k8_data {
+ unsigned int cpu;
+
+ u32 numps; /* number of p-states */
+ u32 batps; /* number of p-states supported on battery */
+
+ /* these values are constant when the PSB is used to determine
+ * vid/fid pairings, but are modified during the ->target() call
+ * when ACPI is used */
+ u32 rvo; /* ramp voltage offset */
+ u32 irt; /* isochronous relief time */
+ u32 vidmvs; /* usable value calculated from mvs */
+ u32 vstable; /* voltage stabilization time, units 20 us */
+ u32 plllock; /* pll lock time, units 1 us */
+
+ /* keep track of the current fid / vid */
+ u32 currvid, currfid;
+
+ /* the powernow_table includes all frequency and vid/fid pairings:
+ * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+ * frequency is in kHz */
+ struct cpufreq_frequency_table *powernow_table;
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+ /* the acpi table needs to be kept. it's only available if ACPI was
+ * used to determine valid frequency/vid/fid states */
+ struct acpi_processor_performance acpi_data;
+#endif
+};
+
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */
+#define CPUID_XFAM 0x0ff00000 /* extended family */
+#define CPUID_XFAM_K8 0
+#define CPUID_XMOD 0x000f0000 /* extended model */
+#define CPUID_XMOD_REV_E 0x00020000
+#define CPUID_USE_XFAM_XMOD 0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES 0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
+#define P_STATE_TRANSITION_CAPABLE 6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL 0xc0010041
+#define MSR_FIDVID_STATUS 0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID 0x00010000
+#define MSR_C_LO_NEW_VID 0x00001f00
+#define MSR_C_LO_NEW_FID 0x0000002f
+#define MSR_C_LO_VID_SHIFT 8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO 0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID 0x1f000000
+#define MSR_S_LO_MAX_FID 0x003f0000
+#define MSR_S_LO_START_FID 0x00003f00
+#define MSR_S_LO_CURRENT_FID 0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MAX_WORKING_VID 0x001f0000
+#define MSR_S_HI_START_VID 0x00001f00
+#define MSR_S_HI_CURRENT_VID 0x0000001f
+#define MSR_C_HI_STP_GNT_BENIGN 0x00000001
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ * low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ * in the low fid table
+ * - the parts can only step at 200 MHz intervals, so 1.9 GHz is never valid
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ * (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP 6 /* fid values marking the boundary */
+#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */
+
+#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x1e /* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800 /* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc1 /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffe0 /* not a valid vid if these bits are set */
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */
+
+/*
+ * Most values of interest are enocoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+
+#define IRT_SHIFT 30
+#define RVO_SHIFT 28
+#define PLL_L_SHIFT 20
+#define MVS_SHIFT 18
+#define VST_SHIFT 11
+#define VID_SHIFT 6
+#define IRT_MASK 3
+#define RVO_MASK 3
+#define PLL_L_MASK 0x7f
+#define MVS_MASK 3
+#define VST_MASK 0x7f
+#define VID_MASK 0x1f
+#define FID_MASK 0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN 10
+
+#define PSB_VERSION_1_4 0x14
+
+struct psb_s {
+ u8 signature[10];
+ u8 tableversion;
+ u8 flags1;
+ u16 vstable;
+ u8 flags2;
+ u8 num_tables;
+ u32 cpuid;
+ u8 plllocktime;
+ u8 maxfid;
+ u8 maxvid;
+ u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+ u8 fid;
+ u8 vid;
+};
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
new file mode 100644
index 0000000..07d5612
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -0,0 +1,715 @@
+/*
+ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
+ * M (part of the Centrino chipset).
+ *
+ * Despite the "SpeedStep" in the name, this is almost entirely unlike
+ * traditional SpeedStep.
+ *
+ * Modelled on speedstep.c
+ *
+ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * WARNING WARNING WARNING
+ *
+ * This driver manipulates the PERF_CTL MSR, which is only somewhat
+ * documented. While it seems to work on my laptop, it has not been
+ * tested anywhere else, and it may not work for you, do strange
+ * things or simply crash.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+#include "speedstep-est-common.h"
+
+#define PFX "speedstep-centrino: "
+#define MAINTAINER "Jeremy Fitzhardinge <jeremy@goop.org>"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+
+
+struct cpu_id
+{
+ __u8 x86; /* CPU family */
+ __u8 x86_model; /* model */
+ __u8 x86_mask; /* stepping */
+};
+
+enum {
+ CPU_BANIAS,
+ CPU_DOTHAN_A1,
+ CPU_DOTHAN_A2,
+ CPU_DOTHAN_B0,
+};
+
+static const struct cpu_id cpu_ids[] = {
+ [CPU_BANIAS] = { 6, 9, 5 },
+ [CPU_DOTHAN_A1] = { 6, 13, 1 },
+ [CPU_DOTHAN_A2] = { 6, 13, 2 },
+ [CPU_DOTHAN_B0] = { 6, 13, 6 },
+};
+#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0]))
+
+struct cpu_model
+{
+ const struct cpu_id *cpu_id;
+ const char *model_name;
+ unsigned max_freq; /* max clock in kHz */
+
+ struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
+};
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+
+/* Operating points for current CPU */
+static struct cpu_model *centrino_model[NR_CPUS];
+static const struct cpu_id *centrino_cpu[NR_CPUS];
+
+static struct cpufreq_driver centrino_driver;
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
+
+/* Computes the correct form for IA32_PERF_CTL MSR for a particular
+ frequency/voltage operating point; frequency in MHz, volts in mV.
+ This is stored as "index" in the structure. */
+#define OP(mhz, mv) \
+ { \
+ .frequency = (mhz) * 1000, \
+ .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \
+ }
+
+/*
+ * These voltage tables were derived from the Intel Pentium M
+ * datasheet, document 25261202.pdf, Table 5. I have verified they
+ * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
+ * M.
+ */
+
+/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
+static struct cpufreq_frequency_table banias_900[] =
+{
+ OP(600, 844),
+ OP(800, 988),
+ OP(900, 1004),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
+static struct cpufreq_frequency_table banias_1000[] =
+{
+ OP(600, 844),
+ OP(800, 972),
+ OP(900, 988),
+ OP(1000, 1004),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
+static struct cpufreq_frequency_table banias_1100[] =
+{
+ OP( 600, 956),
+ OP( 800, 1020),
+ OP( 900, 1100),
+ OP(1000, 1164),
+ OP(1100, 1180),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+
+/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
+static struct cpufreq_frequency_table banias_1200[] =
+{
+ OP( 600, 956),
+ OP( 800, 1004),
+ OP( 900, 1020),
+ OP(1000, 1100),
+ OP(1100, 1164),
+ OP(1200, 1180),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.30GHz (Banias) */
+static struct cpufreq_frequency_table banias_1300[] =
+{
+ OP( 600, 956),
+ OP( 800, 1260),
+ OP(1000, 1292),
+ OP(1200, 1356),
+ OP(1300, 1388),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.40GHz (Banias) */
+static struct cpufreq_frequency_table banias_1400[] =
+{
+ OP( 600, 956),
+ OP( 800, 1180),
+ OP(1000, 1308),
+ OP(1200, 1436),
+ OP(1400, 1484),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.50GHz (Banias) */
+static struct cpufreq_frequency_table banias_1500[] =
+{
+ OP( 600, 956),
+ OP( 800, 1116),
+ OP(1000, 1228),
+ OP(1200, 1356),
+ OP(1400, 1452),
+ OP(1500, 1484),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.60GHz (Banias) */
+static struct cpufreq_frequency_table banias_1600[] =
+{
+ OP( 600, 956),
+ OP( 800, 1036),
+ OP(1000, 1164),
+ OP(1200, 1276),
+ OP(1400, 1420),
+ OP(1600, 1484),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.70GHz (Banias) */
+static struct cpufreq_frequency_table banias_1700[] =
+{
+ OP( 600, 956),
+ OP( 800, 1004),
+ OP(1000, 1116),
+ OP(1200, 1228),
+ OP(1400, 1308),
+ OP(1700, 1484),
+ { .frequency = CPUFREQ_TABLE_END }
+};
+#undef OP
+
+#define _BANIAS(cpuid, max, name) \
+{ .cpu_id = cpuid, \
+ .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \
+ .max_freq = (max)*1000, \
+ .op_points = banias_##max, \
+}
+#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
+
+/* CPU models, their operating frequency range, and freq/voltage
+ operating points */
+static struct cpu_model models[] =
+{
+ _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
+ BANIAS(1000),
+ BANIAS(1100),
+ BANIAS(1200),
+ BANIAS(1300),
+ BANIAS(1400),
+ BANIAS(1500),
+ BANIAS(1600),
+ BANIAS(1700),
+
+ /* NULL model_name is a wildcard */
+ { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
+ { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
+ { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+
+ { NULL, }
+};
+#undef _BANIAS
+#undef BANIAS
+
+static int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+ struct cpu_model *model;
+
+ for(model = models; model->cpu_id != NULL; model++)
+ if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
+ (model->model_name == NULL ||
+ strcmp(cpu->x86_model_id, model->model_name) == 0))
+ break;
+
+ if (model->cpu_id == NULL) {
+ /* No match at all */
+ dprintk(KERN_INFO PFX "no support for CPU model \"%s\": "
+ "send /proc/cpuinfo to " MAINTAINER "\n",
+ cpu->x86_model_id);
+ return -ENOENT;
+ }
+
+ if (model->op_points == NULL) {
+ /* Matched a non-match */
+ dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n",
+ cpu->x86_model_id);
+#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+ dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
+#endif
+ return -ENOENT;
+ }
+
+ centrino_model[policy->cpu] = model;
+
+ dprintk("found \"%s\": max frequency: %dkHz\n",
+ model->model_name, model->max_freq);
+
+ return 0;
+}
+
+#else
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
+
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+{
+ if ((c->x86 == x->x86) &&
+ (c->x86_model == x->x86_model) &&
+ (c->x86_mask == x->x86_mask))
+ return 1;
+ return 0;
+}
+
+/* To be called only after centrino_model is initialized */
+static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
+{
+ int i;
+
+ /*
+ * Extract clock in kHz from PERF_CTL value
+ * for centrino, as some DSDTs are buggy.
+ * Ideally, this can be done using the acpi_data structure.
+ */
+ if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
+ (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
+ (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+ msr = (msr >> 8) & 0xff;
+ return msr * 100000;
+ }
+
+ if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+ return 0;
+
+ msr &= 0xffff;
+ for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
+ if (msr == centrino_model[cpu]->op_points[i].index)
+ return centrino_model[cpu]->op_points[i].frequency;
+ }
+ if (failsafe)
+ return centrino_model[cpu]->op_points[i-1].frequency;
+ else
+ return 0;
+}
+
+/* Return the current CPU frequency in kHz */
+static unsigned int get_cur_freq(unsigned int cpu)
+{
+ unsigned l, h;
+ unsigned clock_freq;
+ cpumask_t saved_mask;
+
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (smp_processor_id() != cpu)
+ return 0;
+
+ rdmsr(MSR_IA32_PERF_STATUS, l, h);
+ clock_freq = extract_clock(l, cpu, 0);
+
+ if (unlikely(clock_freq == 0)) {
+ /*
+ * On some CPUs, we can see transient MSR values (which are
+ * not present in _PSS), while CPU is doing some automatic
+ * P-state transition (like TM2). Get the last freq set
+ * in PERF_CTL.
+ */
+ rdmsr(MSR_IA32_PERF_CTL, l, h);
+ clock_freq = extract_clock(l, cpu, 1);
+ }
+
+ set_cpus_allowed(current, saved_mask);
+ return clock_freq;
+}
+
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+
+static struct acpi_processor_performance p;
+
+/*
+ * centrino_cpu_init_acpi - register with ACPI P-States library
+ *
+ * Register with the ACPI P-States library (part of drivers/acpi/processor.c)
+ * in order to determine correct frequency and voltage pairings by reading
+ * the _PSS of the ACPI DSDT or SSDT tables.
+ */
+static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
+{
+ union acpi_object arg0 = {ACPI_TYPE_BUFFER};
+ u32 arg0_buf[3];
+ struct acpi_object_list arg_list = {1, &arg0};
+ unsigned long cur_freq;
+ int result = 0, i;
+ unsigned int cpu = policy->cpu;
+
+ /* _PDC settings */
+ arg0.buffer.length = 12;
+ arg0.buffer.pointer = (u8 *) arg0_buf;
+ arg0_buf[0] = ACPI_PDC_REVISION_ID;
+ arg0_buf[1] = 1;
+ arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR;
+
+ p.pdc = &arg_list;
+
+ /* register with ACPI core */
+ if (acpi_processor_register_performance(&p, cpu)) {
+ dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
+ return -EIO;
+ }
+
+ /* verify the acpi_data */
+ if (p.state_count <= 1) {
+ dprintk("No P-States\n");
+ result = -ENODEV;
+ goto err_unreg;
+ }
+
+ if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ dprintk("Invalid control/status registers (%x - %x)\n",
+ p.control_register.space_id, p.status_register.space_id);
+ result = -EIO;
+ goto err_unreg;
+ }
+
+ for (i=0; i<p.state_count; i++) {
+ if (p.states[i].control != p.states[i].status) {
+ dprintk("Different control (%x) and status values (%x)\n",
+ p.states[i].control, p.states[i].status);
+ result = -EINVAL;
+ goto err_unreg;
+ }
+
+ if (!p.states[i].core_frequency) {
+ dprintk("Zero core frequency for state %u\n", i);
+ result = -EINVAL;
+ goto err_unreg;
+ }
+
+ if (p.states[i].core_frequency > p.states[0].core_frequency) {
+ dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i,
+ p.states[i].core_frequency, p.states[0].core_frequency);
+ p.states[i].core_frequency = 0;
+ continue;
+ }
+ }
+
+ centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL);
+ if (!centrino_model[cpu]) {
+ result = -ENOMEM;
+ goto err_unreg;
+ }
+ memset(centrino_model[cpu], 0, sizeof(struct cpu_model));
+
+ centrino_model[cpu]->model_name=NULL;
+ centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000;
+ centrino_model[cpu]->op_points = kmalloc(sizeof(struct cpufreq_frequency_table) *
+ (p.state_count + 1), GFP_KERNEL);
+ if (!centrino_model[cpu]->op_points) {
+ result = -ENOMEM;
+ goto err_kfree;
+ }
+
+ for (i=0; i<p.state_count; i++) {
+ centrino_model[cpu]->op_points[i].index = p.states[i].control;
+ centrino_model[cpu]->op_points[i].frequency = p.states[i].core_frequency * 1000;
+ dprintk("adding state %i with frequency %u and control value %04x\n",
+ i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
+ }
+ centrino_model[cpu]->op_points[p.state_count].frequency = CPUFREQ_TABLE_END;
+
+ cur_freq = get_cur_freq(cpu);
+
+ for (i=0; i<p.state_count; i++) {
+ if (!p.states[i].core_frequency) {
+ dprintk("skipping state %u\n", i);
+ centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
+ if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) !=
+ (centrino_model[cpu]->op_points[i].frequency)) {
+ dprintk("Invalid encoded frequency (%u vs. %u)\n",
+ extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0),
+ centrino_model[cpu]->op_points[i].frequency);
+ result = -EINVAL;
+ goto err_kfree_all;
+ }
+
+ if (cur_freq == centrino_model[cpu]->op_points[i].frequency)
+ p.state = i;
+ }
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ return 0;
+
+ err_kfree_all:
+ kfree(centrino_model[cpu]->op_points);
+ err_kfree:
+ kfree(centrino_model[cpu]);
+ err_unreg:
+ acpi_processor_unregister_performance(&p, cpu);
+ dprintk(KERN_INFO PFX "invalid ACPI data\n");
+ return (result);
+}
+#else
+static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif
+
+static int centrino_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+ unsigned freq;
+ unsigned l, h;
+ int ret;
+ int i;
+
+ /* Only Intel makes Enhanced Speedstep-capable CPUs */
+ if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+ return -ENODEV;
+
+ for (i = 0; i < N_IDS; i++)
+ if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+ break;
+
+ if (i != N_IDS)
+ centrino_cpu[policy->cpu] = &cpu_ids[i];
+
+ if (is_const_loops_cpu(policy->cpu)) {
+ centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
+ }
+
+ if (centrino_cpu_init_acpi(policy)) {
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ if (!centrino_cpu[policy->cpu]) {
+ dprintk(KERN_INFO PFX "found unsupported CPU with "
+ "Enhanced SpeedStep: send /proc/cpuinfo to "
+ MAINTAINER "\n");
+ return -ENODEV;
+ }
+
+ if (centrino_cpu_init_table(policy)) {
+ return -ENODEV;
+ }
+ }
+
+ /* Check to see if Enhanced SpeedStep is enabled, and try to
+ enable it if not. */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+ if (!(l & (1<<16))) {
+ l |= (1<<16);
+ dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
+ wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+ /* check to see if it stuck */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ if (!(l & (1<<16))) {
+ printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+ return -ENODEV;
+ }
+ }
+
+ freq = get_cur_freq(policy->cpu);
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+ policy->cur = freq;
+
+ dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+ if (ret)
+ return (ret);
+
+ cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+
+ return 0;
+}
+
+static int centrino_cpu_exit(struct cpufreq_policy *policy)
+{
+ unsigned int cpu = policy->cpu;
+
+ if (!centrino_model[cpu])
+ return -ENODEV;
+
+ cpufreq_frequency_table_put_attr(cpu);
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+ if (!centrino_model[cpu]->model_name) {
+ dprintk("unregistering and freeing ACPI data\n");
+ acpi_processor_unregister_performance(&p, cpu);
+ kfree(centrino_model[cpu]->op_points);
+ kfree(centrino_model[cpu]);
+ }
+#endif
+
+ centrino_model[cpu] = NULL;
+
+ return 0;
+}
+
+/**
+ * centrino_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within this model's frequency range at least one
+ * border included.
+ */
+static int centrino_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+}
+
+/**
+ * centrino_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int centrino_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+ unsigned int msr, oldmsr, h, cpu = policy->cpu;
+ struct cpufreq_freqs freqs;
+ cpumask_t saved_mask;
+ int retval;
+
+ if (centrino_model[cpu] == NULL)
+ return -ENODEV;
+
+ /*
+ * Support for SMP systems.
+ * Make sure we are running on the CPU that wants to change frequency
+ */
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, policy->cpus);
+ if (!cpu_isset(smp_processor_id(), policy->cpus)) {
+ dprintk("couldn't limit to CPUs in this domain\n");
+ return(-EAGAIN);
+ }
+
+ if (cpufreq_frequency_table_target(policy, centrino_model[cpu]->op_points, target_freq,
+ relation, &newstate)) {
+ retval = -EINVAL;
+ goto migrate_end;
+ }
+
+ msr = centrino_model[cpu]->op_points[newstate].index;
+ rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+ if (msr == (oldmsr & 0xffff)) {
+ retval = 0;
+ dprintk("no change needed - msr was and needs to be %x\n", oldmsr);
+ goto migrate_end;
+ }
+
+ freqs.cpu = cpu;
+ freqs.old = extract_clock(oldmsr, cpu, 0);
+ freqs.new = extract_clock(msr, cpu, 0);
+
+ dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
+ target_freq, freqs.old, freqs.new, msr);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* all but 16 LSB are "reserved", so treat them with
+ care */
+ oldmsr &= ~0xffff;
+ msr &= 0xffff;
+ oldmsr |= msr;
+
+ wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ retval = 0;
+migrate_end:
+ set_cpus_allowed(current, saved_mask);
+ return (retval);
+}
+
+static struct freq_attr* centrino_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver centrino_driver = {
+ .name = "centrino", /* should be speedstep-centrino,
+ but there's a 16 char limit */
+ .init = centrino_cpu_init,
+ .exit = centrino_cpu_exit,
+ .verify = centrino_verify,
+ .target = centrino_target,
+ .get = get_cur_freq,
+ .attr = centrino_attr,
+ .owner = THIS_MODULE,
+};
+
+
+/**
+ * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
+ *
+ * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
+ * unsupported devices, -ENOENT if there's no voltage table for this
+ * particular CPU model, -EINVAL on problems during initiatization,
+ * and zero on success.
+ *
+ * This is quite picky. Not only does the CPU have to advertise the
+ * "est" flag in the cpuid capability flags, we look for a specific
+ * CPU model and stepping, and we need to have the exact model name in
+ * our voltage tables. That is, be paranoid about not releasing
+ * someone's valuable magic smoke.
+ */
+static int __init centrino_init(void)
+{
+ struct cpuinfo_x86 *cpu = cpu_data;
+
+ if (!cpu_has(cpu, X86_FEATURE_EST))
+ return -ENODEV;
+
+ return cpufreq_register_driver(¢rino_driver);
+}
+
+static void __exit centrino_exit(void)
+{
+ cpufreq_unregister_driver(¢rino_driver);
+}
+
+MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(centrino_init);
+module_exit(centrino_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
new file mode 100644
index 0000000..5ce995c
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
@@ -0,0 +1,25 @@
+/*
+ * Routines common for drivers handling Enhanced Speedstep Technology
+ * Copyright (C) 2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2 -- see
+ * COPYING for details.
+ */
+
+static inline int is_const_loops_cpu(unsigned int cpu)
+{
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+
+ if (c->x86_vendor != X86_VENDOR_INTEL || !cpu_has(c, X86_FEATURE_EST))
+ return 0;
+
+ /*
+ * on P-4s, the TSC runs with constant frequency independent of cpu freq
+ * when we use EST
+ */
+ if (c->x86 == 0xf)
+ return 1;
+
+ return 0;
+}
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
new file mode 100644
index 0000000..5b7d18a
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -0,0 +1,424 @@
+/*
+ * (C) 2001 Dave Jones, Arjan van de ven.
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon reverse engineered information, and on Intel documentation
+ * for chipsets ICH2-M and ICH3-M.
+ *
+ * Many thanks to Ducrot Bruno for finding and fixing the last
+ * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
+ * for extensive testing.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ * SPEEDSTEP - DEFINITIONS *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "speedstep-lib.h"
+
+
+/* speedstep_chipset:
+ * It is necessary to know which chipset is used. As accesses to
+ * this device occur at various places in this module, we need a
+ * static struct pci_dev * pointing to that device.
+ */
+static struct pci_dev *speedstep_chipset_dev;
+
+
+/* speedstep_processor
+ */
+static unsigned int speedstep_processor = 0;
+
+
+/*
+ * There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+ {SPEEDSTEP_HIGH, 0},
+ {SPEEDSTEP_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ * Tries to change the SpeedStep state.
+ */
+static void speedstep_set_state (unsigned int state)
+{
+ u32 pmbase;
+ u8 pm2_blk;
+ u8 value;
+ unsigned long flags;
+
+ if (!speedstep_chipset_dev || (state > 0x1))
+ return;
+
+ /* get PMBASE */
+ pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+ if (!(pmbase & 0x01)) {
+ printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ return;
+ }
+
+ pmbase &= 0xFFFFFFFE;
+ if (!pmbase) {
+ printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ return;
+ }
+
+ /* Disable IRQs */
+ local_irq_save(flags);
+
+ /* read state */
+ value = inb(pmbase + 0x50);
+
+ dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+ /* write new state */
+ value &= 0xFE;
+ value |= state;
+
+ dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+
+ /* Disable bus master arbitration */
+ pm2_blk = inb(pmbase + 0x20);
+ pm2_blk |= 0x01;
+ outb(pm2_blk, (pmbase + 0x20));
+
+ /* Actual transition */
+ outb(value, (pmbase + 0x50));
+
+ /* Restore bus master arbitration */
+ pm2_blk &= 0xfe;
+ outb(pm2_blk, (pmbase + 0x20));
+
+ /* check if transition was successful */
+ value = inb(pmbase + 0x50);
+
+ /* Enable IRQs */
+ local_irq_restore(flags);
+
+ dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+ if (state == (value & 0x1)) {
+ dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
+ } else {
+ printk (KERN_ERR "cpufreq: change failed - I/O error\n");
+ }
+
+ return;
+}
+
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ * Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate (void)
+{
+ u16 value = 0;
+
+ if (!speedstep_chipset_dev)
+ return -EINVAL;
+
+ pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
+ if (!(value & 0x08)) {
+ value |= 0x08;
+ dprintk("activating SpeedStep (TM) registers\n");
+ pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
+ }
+
+ return 0;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
+ *
+ * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
+ * the LPC bridge / PM module which contains all power-management
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset (void)
+{
+ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82801DB_12,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+ if (speedstep_chipset_dev)
+ return 4; /* 4-M */
+
+ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82801CA_12,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+ if (speedstep_chipset_dev)
+ return 3; /* 3-M */
+
+
+ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82801BA_10,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+ if (speedstep_chipset_dev) {
+ /* speedstep.c causes lockups on Dell Inspirons 8000 and
+ * 8100 which use a pretty old revision of the 82815
+ * host brige. Abort on these systems.
+ */
+ static struct pci_dev *hostbridge;
+ u8 rev = 0;
+
+ hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82815_MC,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+
+ if (!hostbridge)
+ return 2; /* 2-M */
+
+ pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
+ if (rev < 5) {
+ dprintk("hostbridge does not support speedstep\n");
+ speedstep_chipset_dev = NULL;
+ pci_dev_put(hostbridge);
+ return 0;
+ }
+
+ pci_dev_put(hostbridge);
+ return 2; /* 2-M */
+ }
+
+ return 0;
+}
+
+static unsigned int _speedstep_get(cpumask_t cpus)
+{
+ unsigned int speed;
+ cpumask_t cpus_allowed;
+
+ cpus_allowed = current->cpus_allowed;
+ set_cpus_allowed(current, cpus);
+ speed = speedstep_get_processor_frequency(speedstep_processor);
+ set_cpus_allowed(current, cpus_allowed);
+ dprintk("detected %u kHz as current frequency\n", speed);
+ return speed;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+ return _speedstep_get(cpumask_of_cpu(cpu));
+}
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+ struct cpufreq_freqs freqs;
+ cpumask_t cpus_allowed;
+ int i;
+
+ if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+ return -EINVAL;
+
+ freqs.old = _speedstep_get(policy->cpus);
+ freqs.new = speedstep_freqs[newstate].frequency;
+ freqs.cpu = policy->cpu;
+
+ dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+
+ /* no transition necessary */
+ if (freqs.old == freqs.new)
+ return 0;
+
+ cpus_allowed = current->cpus_allowed;
+
+ for_each_cpu_mask(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ /* switch to physical CPU where state is to be changed */
+ set_cpus_allowed(current, policy->cpus);
+
+ speedstep_set_state(newstate);
+
+ /* allow to be run on all CPUs */
+ set_cpus_allowed(current, cpus_allowed);
+
+ for_each_cpu_mask(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+ int result = 0;
+ unsigned int speed;
+ cpumask_t cpus_allowed;
+
+ /* only run on CPU to be set, or on its sibling */
+#ifdef CONFIG_SMP
+ policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+ cpus_allowed = current->cpus_allowed;
+ set_cpus_allowed(current, policy->cpus);
+
+ /* detect low and high frequency */
+ result = speedstep_get_freqs(speedstep_processor,
+ &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+ &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+ &speedstep_set_state);
+ set_cpus_allowed(current, cpus_allowed);
+ if (result)
+ return result;
+
+ /* get current speed setting */
+ speed = _speedstep_get(policy->cpus);
+ if (!speed)
+ return -EIO;
+
+ dprintk("currently at %s speed setting - %i MHz\n",
+ (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+ (speed / 1000));
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = speed;
+
+ result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+ return 0;
+}
+
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+
+static struct cpufreq_driver speedstep_driver = {
+ .name = "speedstep-ich",
+ .verify = speedstep_verify,
+ .target = speedstep_target,
+ .init = speedstep_cpu_init,
+ .exit = speedstep_cpu_exit,
+ .get = speedstep_get,
+ .owner = THIS_MODULE,
+ .attr = speedstep_attr,
+};
+
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ * Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+ /* detect processor */
+ speedstep_processor = speedstep_detect_processor();
+ if (!speedstep_processor) {
+ dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+ return -ENODEV;
+ }
+
+ /* detect chipset */
+ if (!speedstep_detect_chipset()) {
+ dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+ return -ENODEV;
+ }
+
+ /* activate speedstep support */
+ if (speedstep_activate()) {
+ pci_dev_put(speedstep_chipset_dev);
+ return -EINVAL;
+ }
+
+ return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ * Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+ pci_dev_put(speedstep_chipset_dev);
+ cpufreq_unregister_driver(&speedstep_driver);
+}
+
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
new file mode 100644
index 0000000..8ba430a
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -0,0 +1,385 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include "speedstep-lib.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+static int relaxed_check = 0;
+#else
+#define relaxed_check 0
+#endif
+
+/*********************************************************************
+ * GET PROCESSOR CORE SPEED IN KHZ *
+ *********************************************************************/
+
+static unsigned int pentium3_get_frequency (unsigned int processor)
+{
+ /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+ struct {
+ unsigned int ratio; /* Frequency Multiplier (x10) */
+ u8 bitmap; /* power on configuration bits
+ [27, 25:22] (in MSR 0x2a) */
+ } msr_decode_mult [] = {
+ { 30, 0x01 },
+ { 35, 0x05 },
+ { 40, 0x02 },
+ { 45, 0x06 },
+ { 50, 0x00 },
+ { 55, 0x04 },
+ { 60, 0x0b },
+ { 65, 0x0f },
+ { 70, 0x09 },
+ { 75, 0x0d },
+ { 80, 0x0a },
+ { 85, 0x26 },
+ { 90, 0x20 },
+ { 100, 0x2b },
+ { 0, 0xff } /* error or unknown value */
+ };
+
+ /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+ struct {
+ unsigned int value; /* Front Side Bus speed in MHz */
+ u8 bitmap; /* power on configuration bits [18: 19]
+ (in MSR 0x2a) */
+ } msr_decode_fsb [] = {
+ { 66, 0x0 },
+ { 100, 0x2 },
+ { 133, 0x1 },
+ { 0, 0xff}
+ };
+
+ u32 msr_lo, msr_tmp;
+ int i = 0, j = 0;
+
+ /* read MSR 0x2a - we only need the low 32 bits */
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ msr_tmp = msr_lo;
+
+ /* decode the FSB */
+ msr_tmp &= 0x00c0000;
+ msr_tmp >>= 18;
+ while (msr_tmp != msr_decode_fsb[i].bitmap) {
+ if (msr_decode_fsb[i].bitmap == 0xff)
+ return 0;
+ i++;
+ }
+
+ /* decode the multiplier */
+ if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+ dprintk("workaround for early PIIIs\n");
+ msr_lo &= 0x03c00000;
+ } else
+ msr_lo &= 0x0bc00000;
+ msr_lo >>= 22;
+ while (msr_lo != msr_decode_mult[j].bitmap) {
+ if (msr_decode_mult[j].bitmap == 0xff)
+ return 0;
+ j++;
+ }
+
+ dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+
+ return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+}
+
+
+static unsigned int pentiumM_get_frequency(void)
+{
+ u32 msr_lo, msr_tmp;
+
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+ /* see table B-2 of 24547212.pdf */
+ if (msr_lo & 0x00040000) {
+ printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ return 0;
+ }
+
+ msr_tmp = (msr_lo >> 22) & 0x1f;
+ dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+
+ return (msr_tmp * 100 * 1000);
+}
+
+
+static unsigned int pentium4_get_frequency(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+ u32 msr_lo, msr_hi, mult;
+ unsigned int fsb = 0;
+
+ rdmsr(0x2c, msr_lo, msr_hi);
+
+ dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+
+ /* decode the FSB: see IA-32 Intel (C) Architecture Software
+ * Developer's Manual, Volume 3: System Prgramming Guide,
+ * revision #12 in Table B-1: MSRs in the Pentium 4 and
+ * Intel Xeon Processors, on page B-4 and B-5.
+ */
+ if (c->x86_model < 2)
+ fsb = 100 * 1000;
+ else {
+ u8 fsb_code = (msr_lo >> 16) & 0x7;
+ switch (fsb_code) {
+ case 0:
+ fsb = 100 * 1000;
+ break;
+ case 1:
+ fsb = 13333 * 10;
+ break;
+ case 2:
+ fsb = 200 * 1000;
+ break;
+ }
+ }
+
+ if (!fsb)
+ printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+
+ /* Multiplier. */
+ if (c->x86_model < 2)
+ mult = msr_lo >> 27;
+ else
+ mult = msr_lo >> 24;
+
+ dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+
+ return (fsb * mult);
+}
+
+
+unsigned int speedstep_get_processor_frequency(unsigned int processor)
+{
+ switch (processor) {
+ case SPEEDSTEP_PROCESSOR_PM:
+ return pentiumM_get_frequency();
+ case SPEEDSTEP_PROCESSOR_P4D:
+ case SPEEDSTEP_PROCESSOR_P4M:
+ return pentium4_get_frequency();
+ case SPEEDSTEP_PROCESSOR_PIII_T:
+ case SPEEDSTEP_PROCESSOR_PIII_C:
+ case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+ return pentium3_get_frequency(processor);
+ default:
+ return 0;
+ };
+ return 0;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+
+
+/*********************************************************************
+ * DETECT SPEEDSTEP-CAPABLE PROCESSOR *
+ *********************************************************************/
+
+unsigned int speedstep_detect_processor (void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ u32 ebx, msr_lo, msr_hi;
+
+ dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
+
+ if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+ ((c->x86 != 6) && (c->x86 != 0xF)))
+ return 0;
+
+ if (c->x86 == 0xF) {
+ /* Intel Mobile Pentium 4-M
+ * or Intel Mobile Pentium 4 with 533 MHz FSB */
+ if (c->x86_model != 2)
+ return 0;
+
+ ebx = cpuid_ebx(0x00000001);
+ ebx &= 0x000000FF;
+
+ dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+
+ switch (c->x86_mask) {
+ case 4:
+ /*
+ * B-stepping [M-P4-M]
+ * sample has ebx = 0x0f, production has 0x0e.
+ */
+ if ((ebx == 0x0e) || (ebx == 0x0f))
+ return SPEEDSTEP_PROCESSOR_P4M;
+ break;
+ case 7:
+ /*
+ * C-stepping [M-P4-M]
+ * needs to have ebx=0x0e, else it's a celeron:
+ * cf. 25130917.pdf / page 7, footnote 5 even
+ * though 25072120.pdf / page 7 doesn't say
+ * samples are only of B-stepping...
+ */
+ if (ebx == 0x0e)
+ return SPEEDSTEP_PROCESSOR_P4M;
+ break;
+ case 9:
+ /*
+ * D-stepping [M-P4-M or M-P4/533]
+ *
+ * this is totally strange: CPUID 0x0F29 is
+ * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+ * The latter need to be sorted out as they don't
+ * support speedstep.
+ * Celerons with CPUID 0x0F29 may have either
+ * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+ * specific.
+ * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+ * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+ * also, M-P4M HTs have ebx=0x8, too
+ * For now, they are distinguished by the model_id string
+ */
+ if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
+ return SPEEDSTEP_PROCESSOR_P4M;
+ break;
+ default:
+ break;
+ }
+ return 0;
+ }
+
+ switch (c->x86_model) {
+ case 0x0B: /* Intel PIII [Tualatin] */
+ /* cpuid_ebx(1) is 0x04 for desktop PIII,
+ 0x06 for mobile PIII-M */
+ ebx = cpuid_ebx(0x00000001);
+ dprintk("ebx is %x\n", ebx);
+
+ ebx &= 0x000000FF;
+
+ if (ebx != 0x06)
+ return 0;
+
+ /* So far all PIII-M processors support SpeedStep. See
+ * Intel's 24540640.pdf of June 2003
+ */
+
+ return SPEEDSTEP_PROCESSOR_PIII_T;
+
+ case 0x08: /* Intel PIII [Coppermine] */
+
+ /* all mobile PIII Coppermines have FSB 100 MHz
+ * ==> sort out a few desktop PIIIs. */
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+ dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+ msr_lo &= 0x00c0000;
+ if (msr_lo != 0x0080000)
+ return 0;
+
+ /*
+ * If the processor is a mobile version,
+ * platform ID has bit 50 set
+ * it has SpeedStep technology if either
+ * bit 56 or 57 is set
+ */
+ rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+ dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
+ if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+ if (c->x86_mask == 0x01) {
+ dprintk("early PIII version\n");
+ return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+ } else
+ return SPEEDSTEP_PROCESSOR_PIII_C;
+ }
+
+ default:
+ return 0;
+ }
+}
+EXPORT_SYMBOL_GPL(speedstep_detect_processor);
+
+
+/*********************************************************************
+ * DETECT SPEEDSTEP SPEEDS *
+ *********************************************************************/
+
+unsigned int speedstep_get_freqs(unsigned int processor,
+ unsigned int *low_speed,
+ unsigned int *high_speed,
+ void (*set_state) (unsigned int state))
+{
+ unsigned int prev_speed;
+ unsigned int ret = 0;
+ unsigned long flags;
+
+ if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
+ return -EINVAL;
+
+ dprintk("trying to determine both speeds\n");
+
+ /* get current speed */
+ prev_speed = speedstep_get_processor_frequency(processor);
+ if (!prev_speed)
+ return -EIO;
+
+ dprintk("previous seped is %u\n", prev_speed);
+
+ local_irq_save(flags);
+
+ /* switch to low state */
+ set_state(SPEEDSTEP_LOW);
+ *low_speed = speedstep_get_processor_frequency(processor);
+ if (!*low_speed) {
+ ret = -EIO;
+ goto out;
+ }
+
+ dprintk("low seped is %u\n", *low_speed);
+
+ /* switch to high state */
+ set_state(SPEEDSTEP_HIGH);
+ *high_speed = speedstep_get_processor_frequency(processor);
+ if (!*high_speed) {
+ ret = -EIO;
+ goto out;
+ }
+
+ dprintk("high seped is %u\n", *high_speed);
+
+ if (*low_speed == *high_speed) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* switch to previous state, if necessary */
+ if (*high_speed != prev_speed)
+ set_state(SPEEDSTEP_LOW);
+
+ out:
+ local_irq_restore(flags);
+ return (ret);
+}
+EXPORT_SYMBOL_GPL(speedstep_get_freqs);
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+module_param(relaxed_check, int, 0444);
+MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+#endif
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE ("GPL");
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
new file mode 100644
index 0000000..261a2c9
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -0,0 +1,47 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+
+/* processors */
+
+#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */
+#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */
+
+/* the following processors are not speedstep-capable and are not auto-detected
+ * in speedstep_detect_processor(). However, their speed can be detected using
+ * the speedstep_get_processor_frequency() call. */
+#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
+#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
+
+/* speedstep states -- only two of them */
+
+#define SPEEDSTEP_HIGH 0x00000000
+#define SPEEDSTEP_LOW 0x00000001
+
+
+/* detect a speedstep-capable processor */
+extern unsigned int speedstep_detect_processor (void);
+
+/* detect the current speed (in khz) of the processor */
+extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+
+
+/* detect the low and high speeds of the processor. The callback
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or
+ * SPEEDSTEP_LOW; the second argument is zero so that no
+ * cpufreq_notify_transition calls are initiated.
+ */
+extern unsigned int speedstep_get_freqs(unsigned int processor,
+ unsigned int *low_speed,
+ unsigned int *high_speed,
+ void (*set_state) (unsigned int state));
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
new file mode 100644
index 0000000..79440b3
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -0,0 +1,424 @@
+/*
+ * Intel SpeedStep SMI driver.
+ *
+ * (C) 2003 Hiroshi Miura <miura@da-cha.org>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+
+/*********************************************************************
+ * SPEEDSTEP - DEFINITIONS *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/ist.h>
+
+#include "speedstep-lib.h"
+
+/* speedstep system management interface port/command.
+ *
+ * These parameters are got from IST-SMI BIOS call.
+ * If user gives it, these are used.
+ *
+ */
+static int smi_port = 0;
+static int smi_cmd = 0;
+static unsigned int smi_sig = 0;
+
+/* info about the processor */
+static unsigned int speedstep_processor = 0;
+
+/*
+ * There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+ {SPEEDSTEP_HIGH, 0},
+ {SPEEDSTEP_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+#define GET_SPEEDSTEP_OWNER 0
+#define GET_SPEEDSTEP_STATE 1
+#define SET_SPEEDSTEP_STATE 2
+#define GET_SPEEDSTEP_FREQS 4
+
+/* how often shall the SMI call be tried if it failed, e.g. because
+ * of DMA activity going on? */
+#define SMI_TRIES 5
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+
+/**
+ * speedstep_smi_ownership
+ */
+static int speedstep_smi_ownership (void)
+{
+ u32 command, result, magic;
+ u32 function = GET_SPEEDSTEP_OWNER;
+ unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
+
+ command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+ magic = virt_to_phys(magic_data);
+
+ dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+
+ __asm__ __volatile__(
+ "out %%al, (%%dx)\n"
+ : "=D" (result)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+ );
+
+ dprintk("result is %x\n", result);
+
+ return result;
+}
+
+/**
+ * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
+ * @low: the low frequency value is placed here
+ * @high: the high frequency value is placed here
+ *
+ * Only available on later SpeedStep-enabled systems, returns false results or
+ * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
+ * shows that the latter occurs if !(ist_info.event & 0xFFFF).
+ */
+static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+{
+ u32 command, result = 0, edi, high_mhz, low_mhz;
+ u32 state=0;
+ u32 function = GET_SPEEDSTEP_FREQS;
+
+ if (!(ist_info.event & 0xFFFF)) {
+ dprintk("bug #1422 -- can't read freqs from BIOS\n", result);
+ return -ENODEV;
+ }
+
+ command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+ dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+
+ __asm__ __volatile__("movl $0, %%edi\n"
+ "out %%al, (%%dx)\n"
+ : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ );
+
+ dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+
+ /* abort if results are obviously incorrect... */
+ if ((high_mhz + low_mhz) < 600)
+ return -EINVAL;
+
+ *high = high_mhz * 1000;
+ *low = low_mhz * 1000;
+
+ return result;
+}
+
+/**
+ * speedstep_get_state - set the SpeedStep state
+ * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static int speedstep_get_state (void)
+{
+ u32 function=GET_SPEEDSTEP_STATE;
+ u32 result, state, edi, command;
+
+ command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+ dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+
+ __asm__ __volatile__("movl $0, %%edi\n"
+ "out %%al, (%%dx)\n"
+ : "=a" (result), "=b" (state), "=D" (edi)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+ );
+
+ dprintk("state is %x, result is %x\n", state, result);
+
+ return (state & 1);
+}
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static void speedstep_set_state (unsigned int state)
+{
+ unsigned int result = 0, command, new_state;
+ unsigned long flags;
+ unsigned int function=SET_SPEEDSTEP_STATE;
+ unsigned int retry = 0;
+
+ if (state > 0x1)
+ return;
+
+ /* Disable IRQs */
+ local_irq_save(flags);
+
+ command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+ dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+
+ do {
+ if (retry) {
+ dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+ mdelay(retry * 50);
+ }
+ retry++;
+ __asm__ __volatile__(
+ "movl $0, %%edi\n"
+ "out %%al, (%%dx)\n"
+ : "=b" (new_state), "=D" (result)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ );
+ } while ((new_state != state) && (retry <= SMI_TRIES));
+
+ /* enable IRQs */
+ local_irq_restore(flags);
+
+ if (new_state == state) {
+ dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
+ } else {
+ printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+ }
+
+ return;
+}
+
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: new freq
+ * @relation:
+ *
+ * Sets a new CPUFreq policy/freq.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned int newstate = 0;
+ struct cpufreq_freqs freqs;
+
+ if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+ return -EINVAL;
+
+ freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
+ freqs.new = speedstep_freqs[newstate].frequency;
+ freqs.cpu = 0; /* speedstep.c is UP only driver */
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ speedstep_set_state(newstate);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+ unsigned int speed,state;
+
+ /* capability check */
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ result = speedstep_smi_ownership();
+ if (result) {
+ dprintk("fails in aquiring ownership of a SMI interface.\n");
+ return -EINVAL;
+ }
+
+ /* detect low and high frequency */
+ result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
+ &speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+ if (result) {
+ /* fall back to speedstep_lib.c dection mechanism: try both states out */
+ dprintk("could not detect low and high frequencies by SMI call.\n");
+ result = speedstep_get_freqs(speedstep_processor,
+ &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+ &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+ &speedstep_set_state);
+
+ if (result) {
+ dprintk("could not detect two different speeds -- aborting.\n");
+ return result;
+ } else
+ dprintk("workaround worked.\n");
+ }
+
+ /* get current speed setting */
+ state = speedstep_get_state();
+ speed = speedstep_freqs[state].frequency;
+
+ dprintk("currently at %s speed setting - %i MHz\n",
+ (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+ (speed / 1000));
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = speed;
+
+ result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+ return 0;
+}
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+ if (cpu)
+ return -ENODEV;
+ return speedstep_get_processor_frequency(speedstep_processor);
+}
+
+
+static int speedstep_resume(struct cpufreq_policy *policy)
+{
+ int result = speedstep_smi_ownership();
+
+ if (result)
+ dprintk("fails in re-aquiring ownership of a SMI interface.\n");
+
+ return result;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver speedstep_driver = {
+ .name = "speedstep-smi",
+ .verify = speedstep_verify,
+ .target = speedstep_target,
+ .init = speedstep_cpu_init,
+ .exit = speedstep_cpu_exit,
+ .get = speedstep_get,
+ .resume = speedstep_resume,
+ .owner = THIS_MODULE,
+ .attr = speedstep_attr,
+};
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ * Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * BIOS, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+ speedstep_processor = speedstep_detect_processor();
+
+ switch (speedstep_processor) {
+ case SPEEDSTEP_PROCESSOR_PIII_T:
+ case SPEEDSTEP_PROCESSOR_PIII_C:
+ case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+ break;
+ default:
+ speedstep_processor = 0;
+ }
+
+ if (!speedstep_processor) {
+ dprintk ("No supported Intel CPU detected.\n");
+ return -ENODEV;
+ }
+
+ dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
+ ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+
+
+ /* Error if no IST-SMI BIOS or no PARM
+ sig= 'ISGE' aka 'Intel Speedstep Gate E' */
+ if ((ist_info.signature != 0x47534943) && (
+ (smi_port == 0) || (smi_cmd == 0)))
+ return -ENODEV;
+
+ if (smi_sig == 1)
+ smi_sig = 0x47534943;
+ else
+ smi_sig = ist_info.signature;
+
+ /* setup smi_port from MODLULE_PARM or BIOS */
+ if ((smi_port > 0xff) || (smi_port < 0)) {
+ return -EINVAL;
+ } else if (smi_port == 0) {
+ smi_port = ist_info.command & 0xff;
+ }
+
+ if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
+ return -EINVAL;
+ } else if (smi_cmd == 0) {
+ smi_cmd = (ist_info.command >> 16) & 0xff;
+ }
+
+ return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ * Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+ cpufreq_unregister_driver(&speedstep_driver);
+}
+
+module_param(smi_port, int, 0444);
+module_param(smi_cmd, int, 0444);
+module_param(smi_sig, uint, 0444);
+
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+
+MODULE_AUTHOR ("Hiroshi Miura");
+MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
new file mode 100644
index 0000000..ba4b011
--- /dev/null
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -0,0 +1,439 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/timer.h>
+
+#include "cpu.h"
+
+/*
+ * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
+ */
+static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned char ccr2, ccr3;
+ unsigned long flags;
+
+ /* we test for DEVID by checking whether CCR3 is writable */
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, ccr3 ^ 0x80);
+ getCx86(0xc0); /* dummy to change bus */
+
+ if (getCx86(CX86_CCR3) == ccr3) { /* no DEVID regs. */
+ ccr2 = getCx86(CX86_CCR2);
+ setCx86(CX86_CCR2, ccr2 ^ 0x04);
+ getCx86(0xc0); /* dummy */
+
+ if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
+ *dir0 = 0xfd;
+ else { /* Cx486S A step */
+ setCx86(CX86_CCR2, ccr2);
+ *dir0 = 0xfe;
+ }
+ }
+ else {
+ setCx86(CX86_CCR3, ccr3); /* restore CCR3 */
+
+ /* read DIR0 and DIR1 CPU registers */
+ *dir0 = getCx86(CX86_DIR0);
+ *dir1 = getCx86(CX86_DIR1);
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
+ * order to identify the Cyrix CPU model after we're out of setup.c
+ *
+ * Actually since bugs.h doesn't even reference this perhaps someone should
+ * fix the documentation ???
+ */
+static unsigned char Cx86_dir0_msb __initdata = 0;
+
+static char Cx86_model[][9] __initdata = {
+ "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
+ "M II ", "Unknown"
+};
+static char Cx486_name[][5] __initdata = {
+ "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
+ "SRx2", "DRx2"
+};
+static char Cx486S_name[][4] __initdata = {
+ "S", "S2", "Se", "S2e"
+};
+static char Cx486D_name[][4] __initdata = {
+ "DX", "DX2", "?", "?", "?", "DX4"
+};
+static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __initdata = "12??43";
+static char cyrix_model_mult2[] __initdata = "12233445";
+
+/*
+ * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
+ * BIOSes for compatibility with DOS games. This makes the udelay loop
+ * work correctly, and improves performance.
+ *
+ * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
+ */
+
+extern void calibrate_delay(void) __init;
+
+static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+{
+ unsigned long flags;
+
+ if (Cx86_dir0_msb == 3) {
+ unsigned char ccr3, ccr5;
+
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ ccr5 = getCx86(CX86_CCR5);
+ if (ccr5 & 2)
+ setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ local_irq_restore(flags);
+
+ if (ccr5 & 2) { /* possible wrong calibration done */
+ printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
+ calibrate_delay();
+ c->loops_per_jiffy = loops_per_jiffy;
+ }
+ }
+}
+
+
+static void __init set_cx86_reorder(void)
+{
+ u8 ccr3;
+
+ printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n");
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+
+ /* Load/Store Serialize to mem access disable (=reorder it) */
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ /* set load/store serialize from 1GB to 4GB */
+ ccr3 |= 0xe0;
+ setCx86(CX86_CCR3, ccr3);
+}
+
+static void __init set_cx86_memwb(void)
+{
+ u32 cr0;
+
+ printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
+
+ /* CCR2 bit 2: unlock NW bit */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ /* set 'Not Write-through' */
+ cr0 = 0x20000000;
+ __asm__("movl %%cr0,%%eax\n\t"
+ "orl %0,%%eax\n\t"
+ "movl %%eax,%%cr0\n"
+ : : "r" (cr0)
+ :"ax");
+ /* CCR2 bit 2: lock NW bit and set WT1 */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+}
+
+static void __init set_cx86_inc(void)
+{
+ unsigned char ccr3;
+
+ printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
+
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ /* PCR1 -- Performance Control */
+ /* Incrementor on, whatever that is */
+ setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
+ /* PCR0 -- Performance Control */
+ /* Incrementor Margin 10 */
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+}
+
+/*
+ * Configure later MediaGX and/or Geode processor.
+ */
+
+static void __init geode_configure(void)
+{
+ unsigned long flags;
+ u8 ccr3, ccr4;
+ local_irq_save(flags);
+
+ /* Suspend on halt power saving and enable #SUSP pin */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */
+
+ ccr4 = getCx86(CX86_CCR4);
+ ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
+
+ setCx86(CX86_CCR3, ccr3);
+
+ set_cx86_memwb();
+ set_cx86_reorder();
+ set_cx86_inc();
+
+ local_irq_restore(flags);
+}
+
+
+#ifdef CONFIG_PCI
+static struct pci_device_id cyrix_55x0[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
+ { },
+};
+#endif
+
+static void __init init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
+ char *buf = c->x86_model_id;
+ const char *p = NULL;
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
+ if ( test_bit(1*32+24, c->x86_capability) ) {
+ clear_bit(1*32+24, c->x86_capability);
+ set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+ }
+
+ do_cyrix_devid(&dir0, &dir1);
+
+ check_cx686_slop(c);
+
+ Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+ dir0_lsn = dir0 & 0xf; /* model or clock multiplier */
+
+ /* common case step number/rev -- exceptions handled below */
+ c->x86_model = (dir1 >> 4) + 1;
+ c->x86_mask = dir1 & 0xf;
+
+ /* Now cook; the original recipe is by Channing Corn, from Cyrix.
+ * We do the same thing for each generation: we work out
+ * the model, multiplier and stepping. Black magic included,
+ * to make the silicon step/rev numbers match the printed ones.
+ */
+
+ switch (dir0_msn) {
+ unsigned char tmp;
+
+ case 0: /* Cx486SLC/DLC/SRx/DRx */
+ p = Cx486_name[dir0_lsn & 7];
+ break;
+
+ case 1: /* Cx486S/DX/DX2/DX4 */
+ p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
+ : Cx486S_name[dir0_lsn & 3];
+ break;
+
+ case 2: /* 5x86 */
+ Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+ p = Cx86_cb+2;
+ break;
+
+ case 3: /* 6x86/6x86L */
+ Cx86_cb[1] = ' ';
+ Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+ if (dir1 > 0x21) { /* 686L */
+ Cx86_cb[0] = 'L';
+ p = Cx86_cb;
+ (c->x86_model)++;
+ } else /* 686 */
+ p = Cx86_cb+1;
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ /* 6x86's contain this bug */
+ c->coma_bug = 1;
+ break;
+
+ case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
+#ifdef CONFIG_PCI
+ /* It isn't really a PCI quirk directly, but the cure is the
+ same. The MediaGX has deep magic SMM stuff that handles the
+ SB emulation. It thows away the fifo on disable_dma() which
+ is wrong and ruins the audio.
+
+ Bug2: VSA1 has a wrap bug so that using maximum sized DMA
+ causes bad things. According to NatSemi VSA2 has another
+ bug to do with 'hlt'. I've not seen any boards using VSA2
+ and X doesn't seem to support it either so who cares 8).
+ VSA1 we work around however.
+ */
+
+ printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
+ isa_dma_bridge_buggy = 2;
+#endif
+ c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
+
+ /*
+ * The 5510/5520 companion chips have a funky PIT.
+ */
+ if (pci_dev_present(cyrix_55x0))
+ pit_latch_buggy = 1;
+
+ /* GXm supports extended cpuid levels 'ala' AMD */
+ if (c->cpuid_level == 2) {
+ /* Enable cxMMX extensions (GX1 Datasheet 54) */
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+
+ /* GXlv/GXm/GX1 */
+ if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63)
+ geode_configure();
+ get_model_name(c); /* get CPU marketing name */
+ return;
+ }
+ else { /* MediaGX */
+ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
+ p = Cx86_cb+2;
+ c->x86_model = (dir1 & 0x20) ? 1 : 2;
+ }
+ break;
+
+ case 5: /* 6x86MX/M II */
+ if (dir1 > 7)
+ {
+ dir0_msn++; /* M II */
+ /* Enable MMX extensions (App note 108) */
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ }
+ else
+ {
+ c->coma_bug = 1; /* 6x86MX, it has the bug. */
+ }
+ tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
+ Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
+ p = Cx86_cb+tmp;
+ if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+ (c->x86_model)++;
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ break;
+
+ case 0xf: /* Cyrix 486 without DEVID registers */
+ switch (dir0_lsn) {
+ case 0xd: /* either a 486SLC or DLC w/o DEVID */
+ dir0_msn = 0;
+ p = Cx486_name[(c->hard_math) ? 1 : 0];
+ break;
+
+ case 0xe: /* a 486S A step */
+ dir0_msn = 0;
+ p = Cx486S_name[0];
+ break;
+ }
+ break;
+
+ default: /* unknown (shouldn't happen, we know everyone ;-) */
+ dir0_msn = 7;
+ break;
+ }
+ strcpy(buf, Cx86_model[dir0_msn & 7]);
+ if (p) strcat(buf, p);
+ return;
+}
+
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+ unsigned int test;
+
+ __asm__ __volatile__(
+ "sahf\n\t" /* clear flags (%eax = 0x0005) */
+ "div %b2\n\t" /* divide 5 by 2 */
+ "lahf" /* store flags into %ah */
+ : "=a" (test)
+ : "0" (5), "q" (2)
+ : "cc");
+
+ /* AH is 0x02 on Cyrix after the divide.. */
+ return (unsigned char) (test >> 8) == 0x02;
+}
+
+static void cyrix_identify(struct cpuinfo_x86 * c)
+{
+ /* Detect Cyrix with disabled CPUID */
+ if ( c->x86 == 4 && test_cyrix_52div() ) {
+ unsigned char dir0, dir1;
+
+ strcpy(c->x86_vendor_id, "CyrixInstead");
+ c->x86_vendor = X86_VENDOR_CYRIX;
+
+ /* Actually enable cpuid on the older cyrix */
+
+ /* Retrieve CPU revisions */
+
+ do_cyrix_devid(&dir0, &dir1);
+
+ dir0>>=4;
+
+ /* Check it is an affected model */
+
+ if (dir0 == 5 || dir0 == 3)
+ {
+ unsigned char ccr3, ccr4;
+ unsigned long flags;
+ printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ ccr4 = getCx86(CX86_CCR4);
+ setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ local_irq_restore(flags);
+ }
+ }
+ generic_identify(c);
+}
+
+static struct cpu_dev cyrix_cpu_dev __initdata = {
+ .c_vendor = "Cyrix",
+ .c_ident = { "CyrixInstead" },
+ .c_init = init_cyrix,
+ .c_identify = cyrix_identify,
+};
+
+int __init cyrix_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(cyrix_init_cpu);
+
+static struct cpu_dev nsc_cpu_dev __initdata = {
+ .c_vendor = "NSC",
+ .c_ident = { "Geode by NSC" },
+ .c_init = init_cyrix,
+ .c_identify = generic_identify,
+};
+
+int __init nsc_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(nsc_init_cpu);
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c
new file mode 100644
index 0000000..b8d847b
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel.c
@@ -0,0 +1,248 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+
+#include "cpu.h"
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+extern int trap_init_f00f_bug(void);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask;
+#endif
+
+void __init early_intel_workaround(struct cpuinfo_x86 *c)
+{
+ if (c->x86_vendor != X86_VENDOR_INTEL)
+ return;
+ /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+ if (c->x86 == 15 && c->x86_cache_alignment == 64)
+ c->x86_cache_alignment = 128;
+}
+
+/*
+ * Early probe support logic for ppro memory erratum #50
+ *
+ * This is called before we do cpu ident work
+ */
+
+int __init ppro_with_ram_bug(void)
+{
+ /* Uses data from early_cpu_detect now */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model == 1 &&
+ boot_cpu_data.x86_mask < 8) {
+ printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+ return 1;
+ }
+ return 0;
+}
+
+
+/*
+ * P4 Xeon errata 037 workaround.
+ * Hardware prefetcher may cause stale data to be loaded into the cache.
+ */
+static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+{
+ unsigned long lo, hi;
+
+ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+ rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ if ((lo & (1<<9)) == 0) {
+ printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
+ printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
+ lo |= (1<<9); /* Disable hw prefetching */
+ wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ }
+ }
+}
+
+
+static void __init init_intel(struct cpuinfo_x86 *c)
+{
+ unsigned int l2 = 0;
+ char *p = NULL;
+
+#ifdef CONFIG_X86_F00F_BUG
+ /*
+ * All current models of Pentium and Pentium with MMX technology CPUs
+ * have the F0 0F bug, which lets nonprivileged users lock up the system.
+ * Note that the workaround only should be initialized once...
+ */
+ c->f00f_bug = 0;
+ if ( c->x86 == 5 ) {
+ static int f00f_workaround_enabled = 0;
+
+ c->f00f_bug = 1;
+ if ( !f00f_workaround_enabled ) {
+ trap_init_f00f_bug();
+ printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+ f00f_workaround_enabled = 1;
+ }
+ }
+#endif
+
+ select_idle_routine(c);
+ l2 = init_intel_cacheinfo(c);
+
+ /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
+ if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+ clear_bit(X86_FEATURE_SEP, c->x86_capability);
+
+ /* Names for the Pentium II/Celeron processors
+ detectable only by also checking the cache size.
+ Dixon is NOT a Celeron. */
+ if (c->x86 == 6) {
+ switch (c->x86_model) {
+ case 5:
+ if (c->x86_mask == 0) {
+ if (l2 == 0)
+ p = "Celeron (Covington)";
+ else if (l2 == 256)
+ p = "Mobile Pentium II (Dixon)";
+ }
+ break;
+
+ case 6:
+ if (l2 == 128)
+ p = "Celeron (Mendocino)";
+ else if (c->x86_mask == 0 || c->x86_mask == 5)
+ p = "Celeron-A";
+ break;
+
+ case 8:
+ if (l2 == 128)
+ p = "Celeron (Coppermine)";
+ break;
+ }
+ }
+
+ if ( p )
+ strcpy(c->x86_model_id, p);
+
+ detect_ht(c);
+
+ /* Work around errata */
+ Intel_errata_workarounds(c);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+ /*
+ * Set up the preferred alignment for movsl bulk memory moves
+ */
+ switch (c->x86) {
+ case 4: /* 486: untested */
+ break;
+ case 5: /* Old Pentia: untested */
+ break;
+ case 6: /* PII/PIII only like movsl with 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ case 15: /* P4 is OK down to 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ }
+#endif
+
+ if (c->x86 == 15)
+ set_bit(X86_FEATURE_P4, c->x86_capability);
+ if (c->x86 == 6)
+ set_bit(X86_FEATURE_P3, c->x86_capability);
+}
+
+
+static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* Intel PIII Tualatin. This comes in two flavours.
+ * One has 256kb of cache, the other 512. We have no way
+ * to determine which, so we use a boottime override
+ * for the 512kb model, and assume 256 otherwise.
+ */
+ if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
+ size = 256;
+ return size;
+}
+
+static struct cpu_dev intel_cpu_dev __initdata = {
+ .c_vendor = "Intel",
+ .c_ident = { "GenuineIntel" },
+ .c_models = {
+ { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
+ {
+ [0] = "486 DX-25/33",
+ [1] = "486 DX-50",
+ [2] = "486 SX",
+ [3] = "486 DX/2",
+ [4] = "486 SL",
+ [5] = "486 SX/2",
+ [7] = "486 DX/2-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB"
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
+ {
+ [0] = "Pentium 60/66 A-step",
+ [1] = "Pentium 60/66",
+ [2] = "Pentium 75 - 200",
+ [3] = "OverDrive PODP5V83",
+ [4] = "Pentium MMX",
+ [7] = "Mobile Pentium 75 - 200",
+ [8] = "Mobile Pentium MMX"
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
+ {
+ [0] = "Pentium Pro A-step",
+ [1] = "Pentium Pro",
+ [3] = "Pentium II (Klamath)",
+ [4] = "Pentium II (Deschutes)",
+ [5] = "Pentium II (Deschutes)",
+ [6] = "Mobile Pentium II",
+ [7] = "Pentium III (Katmai)",
+ [8] = "Pentium III (Coppermine)",
+ [10] = "Pentium III (Cascades)",
+ [11] = "Pentium III (Tualatin)",
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
+ {
+ [0] = "Pentium 4 (Unknown)",
+ [1] = "Pentium 4 (Willamette)",
+ [2] = "Pentium 4 (Northwood)",
+ [4] = "Pentium 4 (Foster)",
+ [5] = "Pentium 4 (Foster)",
+ }
+ },
+ },
+ .c_init = init_intel,
+ .c_identify = generic_identify,
+ .c_size_cache = intel_size_cache,
+};
+
+__init int intel_cpu_init(void)
+{
+ cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
+ return 0;
+}
+
+// arch_initcall(intel_cpu_init);
+
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
new file mode 100644
index 0000000..aeb5b4e
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -0,0 +1,598 @@
+/*
+ * Routines to indentify caches on Intel CPU.
+ *
+ * Changes:
+ * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/compiler.h>
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+#include <asm/smp.h>
+
+#define LVL_1_INST 1
+#define LVL_1_DATA 2
+#define LVL_2 3
+#define LVL_3 4
+#define LVL_TRACE 5
+
+struct _cache_table
+{
+ unsigned char descriptor;
+ char cache_type;
+ short size;
+};
+
+/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+static struct _cache_table cache_table[] __initdata =
+{
+ { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
+ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */
+ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x29, LVL_3, 4096 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64 byte line size */
+ { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
+ { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
+ { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
+ { 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */
+ { 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */
+ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x68, LVL_1_DATA, 32 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */
+ { 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */
+ { 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */
+ { 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */
+ { 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7b, LVL_2, 512 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7c, LVL_2, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7d, LVL_2, 2048 }, /* 8-way set assoc, 64 byte line size */
+ { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */
+ { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */
+ { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */
+ { 0x84, LVL_2, 1024 }, /* 8-way set assoc, 32 byte line size */
+ { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */
+ { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */
+ { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */
+ { 0x00, 0, 0}
+};
+
+
+enum _cache_type
+{
+ CACHE_TYPE_NULL = 0,
+ CACHE_TYPE_DATA = 1,
+ CACHE_TYPE_INST = 2,
+ CACHE_TYPE_UNIFIED = 3
+};
+
+union _cpuid4_leaf_eax {
+ struct {
+ enum _cache_type type:5;
+ unsigned int level:3;
+ unsigned int is_self_initializing:1;
+ unsigned int is_fully_associative:1;
+ unsigned int reserved:4;
+ unsigned int num_threads_sharing:12;
+ unsigned int num_cores_on_die:6;
+ } split;
+ u32 full;
+};
+
+union _cpuid4_leaf_ebx {
+ struct {
+ unsigned int coherency_line_size:12;
+ unsigned int physical_line_partition:10;
+ unsigned int ways_of_associativity:10;
+ } split;
+ u32 full;
+};
+
+union _cpuid4_leaf_ecx {
+ struct {
+ unsigned int number_of_sets:32;
+ } split;
+ u32 full;
+};
+
+struct _cpuid4_info {
+ union _cpuid4_leaf_eax eax;
+ union _cpuid4_leaf_ebx ebx;
+ union _cpuid4_leaf_ecx ecx;
+ unsigned long size;
+ cpumask_t shared_cpu_map;
+};
+
+#define MAX_CACHE_LEAVES 4
+static unsigned short __devinitdata num_cache_leaves;
+
+static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+{
+ unsigned int eax, ebx, ecx, edx;
+ union _cpuid4_leaf_eax cache_eax;
+
+ cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
+ cache_eax.full = eax;
+ if (cache_eax.split.type == CACHE_TYPE_NULL)
+ return -1;
+
+ this_leaf->eax.full = eax;
+ this_leaf->ebx.full = ebx;
+ this_leaf->ecx.full = ecx;
+ this_leaf->size = (this_leaf->ecx.split.number_of_sets + 1) *
+ (this_leaf->ebx.split.coherency_line_size + 1) *
+ (this_leaf->ebx.split.physical_line_partition + 1) *
+ (this_leaf->ebx.split.ways_of_associativity + 1);
+ return 0;
+}
+
+static int __init find_num_cache_leaves(void)
+{
+ unsigned int eax, ebx, ecx, edx;
+ union _cpuid4_leaf_eax cache_eax;
+ int i;
+ int retval;
+
+ retval = MAX_CACHE_LEAVES;
+ /* Do cpuid(4) loop to find out num_cache_leaves */
+ for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+ cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
+ cache_eax.full = eax;
+ if (cache_eax.split.type == CACHE_TYPE_NULL) {
+ retval = i;
+ break;
+ }
+ }
+ return retval;
+}
+
+unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
+ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
+
+ if (c->cpuid_level > 4) {
+ static int is_initialized;
+
+ if (is_initialized == 0) {
+ /* Init num_cache_leaves from boot CPU */
+ num_cache_leaves = find_num_cache_leaves();
+ is_initialized++;
+ }
+
+ /*
+ * Whenever possible use cpuid(4), deterministic cache
+ * parameters cpuid leaf to find the cache details
+ */
+ for (i = 0; i < num_cache_leaves; i++) {
+ struct _cpuid4_info this_leaf;
+
+ int retval;
+
+ retval = cpuid4_cache_lookup(i, &this_leaf);
+ if (retval >= 0) {
+ switch(this_leaf.eax.split.level) {
+ case 1:
+ if (this_leaf.eax.split.type ==
+ CACHE_TYPE_DATA)
+ new_l1d = this_leaf.size/1024;
+ else if (this_leaf.eax.split.type ==
+ CACHE_TYPE_INST)
+ new_l1i = this_leaf.size/1024;
+ break;
+ case 2:
+ new_l2 = this_leaf.size/1024;
+ break;
+ case 3:
+ new_l3 = this_leaf.size/1024;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ if (c->cpuid_level > 1) {
+ /* supports eax=2 call */
+ int i, j, n;
+ int regs[4];
+ unsigned char *dp = (unsigned char *)regs;
+
+ /* Number of times to iterate */
+ n = cpuid_eax(2) & 0xFF;
+
+ for ( i = 0 ; i < n ; i++ ) {
+ cpuid(2, ®s[0], ®s[1], ®s[2], ®s[3]);
+
+ /* If bit 31 is set, this is an unknown format */
+ for ( j = 0 ; j < 3 ; j++ ) {
+ if ( regs[j] < 0 ) regs[j] = 0;
+ }
+
+ /* Byte 0 is level count, not a descriptor */
+ for ( j = 1 ; j < 16 ; j++ ) {
+ unsigned char des = dp[j];
+ unsigned char k = 0;
+
+ /* look up this descriptor in the table */
+ while (cache_table[k].descriptor != 0)
+ {
+ if (cache_table[k].descriptor == des) {
+ switch (cache_table[k].cache_type) {
+ case LVL_1_INST:
+ l1i += cache_table[k].size;
+ break;
+ case LVL_1_DATA:
+ l1d += cache_table[k].size;
+ break;
+ case LVL_2:
+ l2 += cache_table[k].size;
+ break;
+ case LVL_3:
+ l3 += cache_table[k].size;
+ break;
+ case LVL_TRACE:
+ trace += cache_table[k].size;
+ break;
+ }
+
+ break;
+ }
+
+ k++;
+ }
+ }
+ }
+
+ if (new_l1d)
+ l1d = new_l1d;
+
+ if (new_l1i)
+ l1i = new_l1i;
+
+ if (new_l2)
+ l2 = new_l2;
+
+ if (new_l3)
+ l3 = new_l3;
+
+ if ( trace )
+ printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
+ else if ( l1i )
+ printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+ if ( l1d )
+ printk(", L1 D cache: %dK\n", l1d);
+ else
+ printk("\n");
+ if ( l2 )
+ printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+ if ( l3 )
+ printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+ /*
+ * This assumes the L3 cache is shared; it typically lives in
+ * the northbridge. The L1 caches are included by the L2
+ * cache, and so should not be included for the purpose of
+ * SMP switching weights.
+ */
+ c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+ }
+
+ return l2;
+}
+
+/* pointer to _cpuid4_info array (for each cache leaf) */
+static struct _cpuid4_info *cpuid4_info[NR_CPUS];
+#define CPUID4_INFO_IDX(x,y) (&((cpuid4_info[x])[y]))
+
+#ifdef CONFIG_SMP
+static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+ struct _cpuid4_info *this_leaf;
+ unsigned long num_threads_sharing;
+
+ this_leaf = CPUID4_INFO_IDX(cpu, index);
+ num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
+
+ if (num_threads_sharing == 1)
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+#ifdef CONFIG_X86_HT
+ else if (num_threads_sharing == smp_num_siblings)
+ this_leaf->shared_cpu_map = cpu_sibling_map[cpu];
+#endif
+ else
+ printk(KERN_INFO "Number of CPUs sharing cache didn't match "
+ "any known set of CPUs\n");
+}
+#else
+static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
+#endif
+
+static void free_cache_attributes(unsigned int cpu)
+{
+ kfree(cpuid4_info[cpu]);
+ cpuid4_info[cpu] = NULL;
+}
+
+static int __devinit detect_cache_attributes(unsigned int cpu)
+{
+ struct _cpuid4_info *this_leaf;
+ unsigned long j;
+ int retval;
+
+ if (num_cache_leaves == 0)
+ return -ENOENT;
+
+ cpuid4_info[cpu] = kmalloc(
+ sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL);
+ if (unlikely(cpuid4_info[cpu] == NULL))
+ return -ENOMEM;
+ memset(cpuid4_info[cpu], 0,
+ sizeof(struct _cpuid4_info) * num_cache_leaves);
+
+ /* Do cpuid and store the results */
+ for (j = 0; j < num_cache_leaves; j++) {
+ this_leaf = CPUID4_INFO_IDX(cpu, j);
+ retval = cpuid4_cache_lookup(j, this_leaf);
+ if (unlikely(retval < 0))
+ goto err_out;
+ cache_shared_cpu_map_setup(cpu, j);
+ }
+ return 0;
+
+err_out:
+ free_cache_attributes(cpu);
+ return -ENOMEM;
+}
+
+#ifdef CONFIG_SYSFS
+
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+
+/* pointer to kobject for cpuX/cache */
+static struct kobject * cache_kobject[NR_CPUS];
+
+struct _index_kobject {
+ struct kobject kobj;
+ unsigned int cpu;
+ unsigned short index;
+};
+
+/* pointer to array of kobjects for cpuX/cache/indexY */
+static struct _index_kobject *index_kobject[NR_CPUS];
+#define INDEX_KOBJECT_PTR(x,y) (&((index_kobject[x])[y]))
+
+#define show_one_plus(file_name, object, val) \
+static ssize_t show_##file_name \
+ (struct _cpuid4_info *this_leaf, char *buf) \
+{ \
+ return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+}
+
+show_one_plus(level, eax.split.level, 0);
+show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1);
+show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1);
+show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1);
+show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
+
+static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
+{
+ return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+}
+
+static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf)
+{
+ char mask_str[NR_CPUS];
+ cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map);
+ return sprintf(buf, "%s\n", mask_str);
+}
+
+static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
+ switch(this_leaf->eax.split.type) {
+ case CACHE_TYPE_DATA:
+ return sprintf(buf, "Data\n");
+ break;
+ case CACHE_TYPE_INST:
+ return sprintf(buf, "Instruction\n");
+ break;
+ case CACHE_TYPE_UNIFIED:
+ return sprintf(buf, "Unified\n");
+ break;
+ default:
+ return sprintf(buf, "Unknown\n");
+ break;
+ }
+}
+
+struct _cache_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct _cpuid4_info *, char *);
+ ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#define define_one_ro(_name) \
+static struct _cache_attr _name = \
+ __ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(physical_line_partition);
+define_one_ro(ways_of_associativity);
+define_one_ro(number_of_sets);
+define_one_ro(size);
+define_one_ro(shared_cpu_map);
+
+static struct attribute * default_attrs[] = {
+ &type.attr,
+ &level.attr,
+ &coherency_line_size.attr,
+ &physical_line_partition.attr,
+ &ways_of_associativity.attr,
+ &number_of_sets.attr,
+ &size.attr,
+ &shared_cpu_map.attr,
+ NULL
+};
+
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+ struct _cache_attr *fattr = to_attr(attr);
+ struct _index_kobject *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->show ?
+ fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+ buf) :
+ 0;
+ return ret;
+}
+
+static ssize_t store(struct kobject * kobj, struct attribute * attr,
+ const char * buf, size_t count)
+{
+ return 0;
+}
+
+static struct sysfs_ops sysfs_ops = {
+ .show = show,
+ .store = store,
+};
+
+static struct kobj_type ktype_cache = {
+ .sysfs_ops = &sysfs_ops,
+ .default_attrs = default_attrs,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+ .sysfs_ops = &sysfs_ops,
+};
+
+static void cpuid4_cache_sysfs_exit(unsigned int cpu)
+{
+ kfree(cache_kobject[cpu]);
+ kfree(index_kobject[cpu]);
+ cache_kobject[cpu] = NULL;
+ index_kobject[cpu] = NULL;
+ free_cache_attributes(cpu);
+}
+
+static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+{
+
+ if (num_cache_leaves == 0)
+ return -ENOENT;
+
+ detect_cache_attributes(cpu);
+ if (cpuid4_info[cpu] == NULL)
+ return -ENOENT;
+
+ /* Allocate all required memory */
+ cache_kobject[cpu] = kmalloc(sizeof(struct kobject), GFP_KERNEL);
+ if (unlikely(cache_kobject[cpu] == NULL))
+ goto err_out;
+ memset(cache_kobject[cpu], 0, sizeof(struct kobject));
+
+ index_kobject[cpu] = kmalloc(
+ sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+ if (unlikely(index_kobject[cpu] == NULL))
+ goto err_out;
+ memset(index_kobject[cpu], 0,
+ sizeof(struct _index_kobject) * num_cache_leaves);
+
+ return 0;
+
+err_out:
+ cpuid4_cache_sysfs_exit(cpu);
+ return -ENOMEM;
+}
+
+/* Add/Remove cache interface for CPU device */
+static int __devinit cache_add_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i, j;
+ struct _index_kobject *this_object;
+ int retval = 0;
+
+ retval = cpuid4_cache_sysfs_init(cpu);
+ if (unlikely(retval < 0))
+ return retval;
+
+ cache_kobject[cpu]->parent = &sys_dev->kobj;
+ kobject_set_name(cache_kobject[cpu], "%s", "cache");
+ cache_kobject[cpu]->ktype = &ktype_percpu_entry;
+ retval = kobject_register(cache_kobject[cpu]);
+
+ for (i = 0; i < num_cache_leaves; i++) {
+ this_object = INDEX_KOBJECT_PTR(cpu,i);
+ this_object->cpu = cpu;
+ this_object->index = i;
+ this_object->kobj.parent = cache_kobject[cpu];
+ kobject_set_name(&(this_object->kobj), "index%1lu", i);
+ this_object->kobj.ktype = &ktype_cache;
+ retval = kobject_register(&(this_object->kobj));
+ if (unlikely(retval)) {
+ for (j = 0; j < i; j++) {
+ kobject_unregister(
+ &(INDEX_KOBJECT_PTR(cpu,j)->kobj));
+ }
+ kobject_unregister(cache_kobject[cpu]);
+ cpuid4_cache_sysfs_exit(cpu);
+ break;
+ }
+ }
+ return retval;
+}
+
+static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i;
+
+ for (i = 0; i < num_cache_leaves; i++)
+ kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+ kobject_unregister(cache_kobject[cpu]);
+ cpuid4_cache_sysfs_exit(cpu);
+ return 0;
+}
+
+static struct sysdev_driver cache_sysdev_driver = {
+ .add = cache_add_dev,
+ .remove = __devexit_p(cache_remove_dev),
+};
+
+/* Register/Unregister the cpu_cache driver */
+static int __devinit cache_register_driver(void)
+{
+ if (num_cache_leaves == 0)
+ return 0;
+
+ return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+}
+
+device_initcall(cache_register_driver);
+
+#endif
+
diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile
new file mode 100644
index 0000000..30808f3
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/Makefile
@@ -0,0 +1,2 @@
+obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c
new file mode 100644
index 0000000..8df52e8
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/k7.c
@@ -0,0 +1,97 @@
+/*
+ * Athlon/Hammer specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For AMD Athlon/Duron */
+static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
+{
+ int recover=1;
+ u32 alow, ahigh, high, low;
+ u32 mcgstl, mcgsth;
+ int i;
+
+ rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ if (mcgstl & (1<<0)) /* Recoverable ? */
+ recover=0;
+
+ printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+ smp_processor_id(), mcgsth, mcgstl);
+
+ for (i=1; i<nr_mce_banks; i++) {
+ rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+ if (high&(1<<31)) {
+ if (high & (1<<29))
+ recover |= 1;
+ if (high & (1<<25))
+ recover |= 2;
+ printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+ high &= ~(1<<31);
+ if (high & (1<<27)) {
+ rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+ printk ("[%08x%08x]", ahigh, alow);
+ }
+ if (high & (1<<26)) {
+ rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+ printk (" at %08x%08x", ahigh, alow);
+ }
+ printk ("\n");
+ /* Clear it */
+ wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+ /* Serialize */
+ wmb();
+ add_taint(TAINT_MACHINE_CHECK);
+ }
+ }
+
+ if (recover&2)
+ panic ("CPU context corrupt");
+ if (recover&1)
+ panic ("Unable to continue");
+ printk (KERN_EMERG "Attempting to continue.\n");
+ mcgstl &= ~(1<<2);
+ wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+/* AMD K7 machine check is Intel like */
+void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ int i;
+
+ machine_check_vector = k7_machine_check;
+ wmb();
+
+ printk (KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr (MSR_IA32_MCG_CAP, l, h);
+ if (l & (1<<8)) /* Control register present ? */
+ wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+ nr_mce_banks = l & 0xff;
+
+ /* Clear status for MC index 0 separately, we don't touch CTL,
+ * as some Athlons cause spurious MCEs when its enabled. */
+ wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+ for (i=1; i<nr_mce_banks; i++) {
+ wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ }
+
+ set_in_cr4 (X86_CR4_MCE);
+ printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
new file mode 100644
index 0000000..bf6d1ae
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,77 @@
+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
+
+/* Handle unconfigured int18 (should never happen) */
+static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{
+ printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+ if (mce_disabled==1)
+ return;
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (c->x86==6 || c->x86==15)
+ amd_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_INTEL:
+ if (c->x86==5)
+ intel_p5_mcheck_init(c);
+ if (c->x86==6)
+ intel_p6_mcheck_init(c);
+ if (c->x86==15)
+ intel_p4_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_CENTAUR:
+ if (c->x86==5)
+ winchip_mcheck_init(c);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int __init mcheck_disable(char *str)
+{
+ mce_disabled = 1;
+ return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+ mce_disabled = -1;
+ return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);
diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h
new file mode 100644
index 0000000..dc2416d
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.h
@@ -0,0 +1,14 @@
+#include <linux/init.h>
+
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+
+/* Call the installed machine check handler for this CPU setup. */
+extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
+
+extern int mce_disabled __initdata;
+extern int nr_mce_banks;
+
diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/i386/kernel/cpu/mcheck/non-fatal.c
new file mode 100644
index 0000000..7864ddf
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/non-fatal.c
@@ -0,0 +1,93 @@
+/*
+ * Non Fatal Machine Check Exception Reporting
+ *
+ * (C) Copyright 2002 Dave Jones. <davej@codemonkey.org.uk>
+ *
+ * This file contains routines to check for non-fatal MCEs every 15s
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+static int firstbank;
+
+#define MCE_RATE 15*HZ /* timer rate is 15s */
+
+static void mce_checkregs (void *info)
+{
+ u32 low, high;
+ int i;
+
+ for (i=firstbank; i<nr_mce_banks; i++) {
+ rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+
+ if (high & (1<<31)) {
+ printk(KERN_INFO "MCE: The hardware reports a non "
+ "fatal, correctable incident occurred on "
+ "CPU %d.\n",
+ smp_processor_id());
+ printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+ /* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
+ wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+ /* Serialize */
+ wmb();
+ add_taint(TAINT_MACHINE_CHECK);
+ }
+ }
+}
+
+static void mce_work_fn(void *data);
+static DECLARE_WORK(mce_work, mce_work_fn, NULL);
+
+static void mce_work_fn(void *data)
+{
+ on_each_cpu(mce_checkregs, NULL, 1, 1);
+ schedule_delayed_work(&mce_work, MCE_RATE);
+}
+
+static int __init init_nonfatal_mce_checker(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ /* Check for MCE support */
+ if (!cpu_has(c, X86_FEATURE_MCE))
+ return -ENODEV;
+
+ /* Check for PPro style MCA */
+ if (!cpu_has(c, X86_FEATURE_MCA))
+ return -ENODEV;
+
+ /* Some Athlons misbehave when we frob bank 0 */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 6)
+ firstbank = 1;
+ else
+ firstbank = 0;
+
+ /*
+ * Check for non-fatal errors every MCE_RATE s
+ */
+ schedule_delayed_work(&mce_work, MCE_RATE);
+ printk(KERN_INFO "Machine check exception polling timer started.\n");
+ return 0;
+}
+module_init(init_nonfatal_mce_checker);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
new file mode 100644
index 0000000..8b16ceb
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -0,0 +1,271 @@
+/*
+ * P4 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "mce.h"
+
+/* as supported by the P4/Xeon family */
+struct intel_mce_extended_msrs {
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 esi;
+ u32 edi;
+ u32 ebp;
+ u32 esp;
+ u32 eflags;
+ u32 eip;
+ /* u32 *reserved[]; */
+};
+
+static int mce_num_extended_msrs = 0;
+
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+static void unexpected_thermal_interrupt(struct pt_regs *regs)
+{
+ printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
+ smp_processor_id());
+ add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* P4/Xeon Thermal transition interrupt handler */
+static void intel_thermal_interrupt(struct pt_regs *regs)
+{
+ u32 l, h;
+ unsigned int cpu = smp_processor_id();
+ static unsigned long next[NR_CPUS];
+
+ ack_APIC_irq();
+
+ if (time_after(next[cpu], jiffies))
+ return;
+
+ next[cpu] = jiffies + HZ*5;
+ rdmsr(MSR_IA32_THERM_STATUS, l, h);
+ if (l & 0x1) {
+ printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
+ printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
+ cpu);
+ add_taint(TAINT_MACHINE_CHECK);
+ } else {
+ printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+ }
+}
+
+/* Thermal interrupt handler for this CPU setup */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+
+fastcall void smp_thermal_interrupt(struct pt_regs *regs)
+{
+ irq_enter();
+ vendor_thermal_interrupt(regs);
+ irq_exit();
+}
+
+/* P4/Xeon Thermal regulation detect and init */
+static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ unsigned int cpu = smp_processor_id();
+
+ /* Thermal monitoring */
+ if (!cpu_has(c, X86_FEATURE_ACPI))
+ return; /* -ENODEV */
+
+ /* Clock modulation */
+ if (!cpu_has(c, X86_FEATURE_ACC))
+ return; /* -ENODEV */
+
+ /* first check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already -zwanem.
+ */
+ rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+ h = apic_read(APIC_LVTTHMR);
+ if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
+ printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
+ cpu);
+ return; /* -EBUSY */
+ }
+
+ /* check whether a vector already exists, temporarily masked? */
+ if (h & APIC_VECTOR_MASK) {
+ printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
+ "installed\n",
+ cpu, (h & APIC_VECTOR_MASK));
+ return; /* -EBUSY */
+ }
+
+ /* The temperature transition interrupt handler setup */
+ h = THERMAL_APIC_VECTOR; /* our delivery vector */
+ h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
+ apic_write_around(APIC_LVTTHMR, h);
+
+ rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+
+ /* ok we're good to go... */
+ vendor_thermal_interrupt = intel_thermal_interrupt;
+
+ rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+
+ l = apic_read (APIC_LVTTHMR);
+ apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+ printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+ return;
+}
+#endif /* CONFIG_X86_MCE_P4THERMAL */
+
+
+/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
+static inline int intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+{
+ u32 h;
+
+ if (mce_num_extended_msrs == 0)
+ goto done;
+
+ rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
+ rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
+ rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
+ rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
+ rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
+ rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
+ rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
+ rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
+ rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
+ rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+
+ /* can we rely on kmalloc to do a dynamic
+ * allocation for the reserved registers?
+ */
+done:
+ return mce_num_extended_msrs;
+}
+
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+ int recover=1;
+ u32 alow, ahigh, high, low;
+ u32 mcgstl, mcgsth;
+ int i;
+ struct intel_mce_extended_msrs dbg;
+
+ rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ if (mcgstl & (1<<0)) /* Recoverable ? */
+ recover=0;
+
+ printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+ smp_processor_id(), mcgsth, mcgstl);
+
+ if (intel_get_extended_msrs(&dbg)) {
+ printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
+ smp_processor_id(), dbg.eip, dbg.eflags);
+ printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
+ dbg.eax, dbg.ebx, dbg.ecx, dbg.edx);
+ printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
+ dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
+ }
+
+ for (i=0; i<nr_mce_banks; i++) {
+ rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+ if (high & (1<<31)) {
+ if (high & (1<<29))
+ recover |= 1;
+ if (high & (1<<25))
+ recover |= 2;
+ printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+ high &= ~(1<<31);
+ if (high & (1<<27)) {
+ rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+ printk ("[%08x%08x]", ahigh, alow);
+ }
+ if (high & (1<<26)) {
+ rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+ printk (" at %08x%08x", ahigh, alow);
+ }
+ printk ("\n");
+ }
+ }
+
+ if (recover & 2)
+ panic ("CPU context corrupt");
+ if (recover & 1)
+ panic ("Unable to continue");
+
+ printk(KERN_EMERG "Attempting to continue.\n");
+ /*
+ * Do not clear the MSR_IA32_MCi_STATUS if the error is not
+ * recoverable/continuable.This will allow BIOS to look at the MSRs
+ * for errors if the OS could not log the error.
+ */
+ for (i=0; i<nr_mce_banks; i++) {
+ u32 msr;
+ msr = MSR_IA32_MC0_STATUS+i*4;
+ rdmsr (msr, low, high);
+ if (high&(1<<31)) {
+ /* Clear it */
+ wrmsr(msr, 0UL, 0UL);
+ /* Serialize */
+ wmb();
+ add_taint(TAINT_MACHINE_CHECK);
+ }
+ }
+ mcgstl &= ~(1<<2);
+ wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ int i;
+
+ machine_check_vector = intel_machine_check;
+ wmb();
+
+ printk (KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr (MSR_IA32_MCG_CAP, l, h);
+ if (l & (1<<8)) /* Control register present ? */
+ wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+ nr_mce_banks = l & 0xff;
+
+ for (i=0; i<nr_mce_banks; i++) {
+ wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ }
+
+ set_in_cr4 (X86_CR4_MCE);
+ printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ smp_processor_id());
+
+ /* Check for P4/Xeon extended MCE MSRs */
+ rdmsr (MSR_IA32_MCG_CAP, l, h);
+ if (l & (1<<9)) {/* MCG_EXT_P */
+ mce_num_extended_msrs = (l >> 16) & 0xff;
+ printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+ " available\n",
+ smp_processor_id(), mce_num_extended_msrs);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ /* Check for P4/Xeon Thermal monitor */
+ intel_init_thermal(c);
+#endif
+ }
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c
new file mode 100644
index 0000000..c45a1b4
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p5.c
@@ -0,0 +1,54 @@
+/*
+ * P5 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for Pentium class Intel */
+static fastcall void pentium_machine_check(struct pt_regs * regs, long error_code)
+{
+ u32 loaddr, hi, lotype;
+ rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
+ rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
+ printk(KERN_EMERG "CPU#%d: Machine Check Exception: 0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
+ if(lotype&(1<<5))
+ printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+ add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+
+ /*Check for MCE support */
+ if( !cpu_has(c, X86_FEATURE_MCE) )
+ return;
+
+ /* Default P5 to off as its often misconnected */
+ if(mce_disabled != -1)
+ return;
+ machine_check_vector = pentium_machine_check;
+ wmb();
+
+ /* Read registers before enabling */
+ rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
+ rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
+ printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+
+ /* Enable MCE */
+ set_in_cr4(X86_CR4_MCE);
+ printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
new file mode 100644
index 0000000..46640f8
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -0,0 +1,115 @@
+/*
+ * P6 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For PII/PIII */
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+ int recover=1;
+ u32 alow, ahigh, high, low;
+ u32 mcgstl, mcgsth;
+ int i;
+
+ rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ if (mcgstl & (1<<0)) /* Recoverable ? */
+ recover=0;
+
+ printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+ smp_processor_id(), mcgsth, mcgstl);
+
+ for (i=0; i<nr_mce_banks; i++) {
+ rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+ if (high & (1<<31)) {
+ if (high & (1<<29))
+ recover |= 1;
+ if (high & (1<<25))
+ recover |= 2;
+ printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+ high &= ~(1<<31);
+ if (high & (1<<27)) {
+ rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+ printk ("[%08x%08x]", ahigh, alow);
+ }
+ if (high & (1<<26)) {
+ rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+ printk (" at %08x%08x", ahigh, alow);
+ }
+ printk ("\n");
+ }
+ }
+
+ if (recover & 2)
+ panic ("CPU context corrupt");
+ if (recover & 1)
+ panic ("Unable to continue");
+
+ printk (KERN_EMERG "Attempting to continue.\n");
+ /*
+ * Do not clear the MSR_IA32_MCi_STATUS if the error is not
+ * recoverable/continuable.This will allow BIOS to look at the MSRs
+ * for errors if the OS could not log the error.
+ */
+ for (i=0; i<nr_mce_banks; i++) {
+ unsigned int msr;
+ msr = MSR_IA32_MC0_STATUS+i*4;
+ rdmsr (msr,low, high);
+ if (high & (1<<31)) {
+ /* Clear it */
+ wrmsr (msr, 0UL, 0UL);
+ /* Serialize */
+ wmb();
+ add_taint(TAINT_MACHINE_CHECK);
+ }
+ }
+ mcgstl &= ~(1<<2);
+ wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ int i;
+
+ /* Check for MCE support */
+ if (!cpu_has(c, X86_FEATURE_MCE))
+ return;
+
+ /* Check for PPro style MCA */
+ if (!cpu_has(c, X86_FEATURE_MCA))
+ return;
+
+ /* Ok machine check is available */
+ machine_check_vector = intel_machine_check;
+ wmb();
+
+ printk (KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr (MSR_IA32_MCG_CAP, l, h);
+ if (l & (1<<8)) /* Control register present ? */
+ wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+ nr_mce_banks = l & 0xff;
+
+ /* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
+ for (i=1; i<nr_mce_banks; i++) {
+ wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ }
+
+ set_in_cr4 (X86_CR4_MCE);
+ printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c
new file mode 100644
index 0000000..753fa7a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/winchip.c
@@ -0,0 +1,37 @@
+/*
+ * IDT Winchip specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for WinChip C6 */
+static fastcall void winchip_machine_check(struct pt_regs * regs, long error_code)
+{
+ printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+ add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting on the Winchip C6 series */
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+{
+ u32 lo, hi;
+ machine_check_vector = winchip_machine_check;
+ wmb();
+ rdmsr(MSR_IDT_FCR1, lo, hi);
+ lo|= (1<<2); /* Enable EIERRINT (int 18 MCE) */
+ lo&= ~(1<<4); /* Enable MCE */
+ wrmsr(MSR_IDT_FCR1, lo, hi);
+ set_in_cr4(X86_CR4_MCE);
+ printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+}
diff --git a/arch/i386/kernel/cpu/mtrr/Makefile b/arch/i386/kernel/cpu/mtrr/Makefile
new file mode 100644
index 0000000..a25b701
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/Makefile
@@ -0,0 +1,5 @@
+obj-y := main.o if.o generic.o state.o
+obj-y += amd.o
+obj-y += cyrix.o
+obj-y += centaur.o
+
diff --git a/arch/i386/kernel/cpu/mtrr/amd.c b/arch/i386/kernel/cpu/mtrr/amd.c
new file mode 100644
index 0000000..1a1e04b
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/amd.c
@@ -0,0 +1,121 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
+#include "mtrr.h"
+
+static void
+amd_get_mtrr(unsigned int reg, unsigned long *base,
+ unsigned int *size, mtrr_type * type)
+{
+ unsigned long low, high;
+
+ rdmsr(MSR_K6_UWCCR, low, high);
+ /* Upper dword is region 1, lower is region 0 */
+ if (reg == 1)
+ low = high;
+ /* The base masks off on the right alignment */
+ *base = (low & 0xFFFE0000) >> PAGE_SHIFT;
+ *type = 0;
+ if (low & 1)
+ *type = MTRR_TYPE_UNCACHABLE;
+ if (low & 2)
+ *type = MTRR_TYPE_WRCOMB;
+ if (!(low & 3)) {
+ *size = 0;
+ return;
+ }
+ /*
+ * This needs a little explaining. The size is stored as an
+ * inverted mask of bits of 128K granularity 15 bits long offset
+ * 2 bits
+ *
+ * So to get a size we do invert the mask and add 1 to the lowest
+ * mask bit (4 as its 2 bits in). This gives us a size we then shift
+ * to turn into 128K blocks
+ *
+ * eg 111 1111 1111 1100 is 512K
+ *
+ * invert 000 0000 0000 0011
+ * +1 000 0000 0000 0100
+ * *128K ...
+ */
+ low = (~low) & 0x1FFFC;
+ *size = (low + 4) << (15 - PAGE_SHIFT);
+ return;
+}
+
+static void amd_set_mtrr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
+/* [SUMMARY] Set variable MTRR register on the local CPU.
+ <reg> The register to set.
+ <base> The base address of the region.
+ <size> The size of the region. If this is 0 the region is disabled.
+ <type> The type of the region.
+ <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+ be done externally.
+ [RETURNS] Nothing.
+*/
+{
+ u32 regs[2];
+
+ /*
+ * Low is MTRR0 , High MTRR 1
+ */
+ rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+ /*
+ * Blank to disable
+ */
+ if (size == 0)
+ regs[reg] = 0;
+ else
+ /* Set the register to the base, the type (off by one) and an
+ inverted bitmask of the size The size is the only odd
+ bit. We are fed say 512K We invert this and we get 111 1111
+ 1111 1011 but if you subtract one and invert you get the
+ desired 111 1111 1111 1100 mask
+
+ But ~(x - 1) == ~x + 1 == -x. Two's complement rocks! */
+ regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
+ | (base << PAGE_SHIFT) | (type + 1);
+
+ /*
+ * The writeback rule is quite specific. See the manual. Its
+ * disable local interrupts, write back the cache, set the mtrr
+ */
+ wbinvd();
+ wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+}
+
+static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+ /* Apply the K6 block alignment and size rules
+ In order
+ o Uncached or gathering only
+ o 128K or bigger block
+ o Power of 2 block
+ o base suitably aligned to the power
+ */
+ if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
+ || (size & ~(size - 1)) - size || (base & (size - 1)))
+ return -EINVAL;
+ return 0;
+}
+
+static struct mtrr_ops amd_mtrr_ops = {
+ .vendor = X86_VENDOR_AMD,
+ .set = amd_set_mtrr,
+ .get = amd_get_mtrr,
+ .get_free_region = generic_get_free_region,
+ .validate_add_page = amd_validate_add_page,
+ .have_wrcomb = positive_have_wrcomb,
+};
+
+int __init amd_init_mtrr(void)
+{
+ set_mtrr_ops(&amd_mtrr_ops);
+ return 0;
+}
+
+//arch_initcall(amd_mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/centaur.c b/arch/i386/kernel/cpu/mtrr/centaur.c
new file mode 100644
index 0000000..33f00ac
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/centaur.c
@@ -0,0 +1,223 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+static struct {
+ unsigned long high;
+ unsigned long low;
+} centaur_mcr[8];
+
+static u8 centaur_mcr_reserved;
+static u8 centaur_mcr_type; /* 0 for winchip, 1 for winchip2 */
+
+/*
+ * Report boot time MCR setups
+ */
+
+static int
+centaur_get_free_region(unsigned long base, unsigned long size)
+/* [SUMMARY] Get a free MTRR.
+ <base> The starting (base) address of the region.
+ <size> The size (in bytes) of the region.
+ [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+ int i, max;
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned int lsize;
+
+ max = num_var_ranges;
+ for (i = 0; i < max; ++i) {
+ if (centaur_mcr_reserved & (1 << i))
+ continue;
+ mtrr_if->get(i, &lbase, &lsize, <ype);
+ if (lsize == 0)
+ return i;
+ }
+ return -ENOSPC;
+}
+
+void
+mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+ centaur_mcr[mcr].low = lo;
+ centaur_mcr[mcr].high = hi;
+}
+
+static void
+centaur_get_mcr(unsigned int reg, unsigned long *base,
+ unsigned int *size, mtrr_type * type)
+{
+ *base = centaur_mcr[reg].high >> PAGE_SHIFT;
+ *size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
+ *type = MTRR_TYPE_WRCOMB; /* If it is there, it is write-combining */
+ if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
+ *type = MTRR_TYPE_UNCACHABLE;
+ if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
+ *type = MTRR_TYPE_WRBACK;
+ if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
+ *type = MTRR_TYPE_WRBACK;
+
+}
+
+static void centaur_set_mcr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
+{
+ unsigned long low, high;
+
+ if (size == 0) {
+ /* Disable */
+ high = low = 0;
+ } else {
+ high = base << PAGE_SHIFT;
+ if (centaur_mcr_type == 0)
+ low = -size << PAGE_SHIFT | 0x1f; /* only support write-combining... */
+ else {
+ if (type == MTRR_TYPE_UNCACHABLE)
+ low = -size << PAGE_SHIFT | 0x02; /* NC */
+ else
+ low = -size << PAGE_SHIFT | 0x09; /* WWO,WC */
+ }
+ }
+ centaur_mcr[reg].high = high;
+ centaur_mcr[reg].low = low;
+ wrmsr(MSR_IDT_MCR0 + reg, low, high);
+}
+
+#if 0
+/*
+ * Initialise the later (saner) Winchip MCR variant. In this version
+ * the BIOS can pass us the registers it has used (but not their values)
+ * and the control register is read/write
+ */
+
+static void __init
+centaur_mcr1_init(void)
+{
+ unsigned i;
+ u32 lo, hi;
+
+ /* Unfortunately, MCR's are read-only, so there is no way to
+ * find out what the bios might have done.
+ */
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ if (((lo >> 17) & 7) == 1) { /* Type 1 Winchip2 MCR */
+ lo &= ~0x1C0; /* clear key */
+ lo |= 0x040; /* set key to 1 */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi); /* unlock MCR */
+ }
+
+ centaur_mcr_type = 1;
+
+ /*
+ * Clear any unconfigured MCR's.
+ */
+
+ for (i = 0; i < 8; ++i) {
+ if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
+ if (!(lo & (1 << (9 + i))))
+ wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+ else
+ /*
+ * If the BIOS set up an MCR we cannot see it
+ * but we don't wish to obliterate it
+ */
+ centaur_mcr_reserved |= (1 << i);
+ }
+ }
+ /*
+ * Throw the main write-combining switch...
+ * However if OOSTORE is enabled then people have already done far
+ * cleverer things and we should behave.
+ */
+
+ lo |= 15; /* Write combine enables */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+/*
+ * Initialise the original winchip with read only MCR registers
+ * no used bitmask for the BIOS to pass on and write only control
+ */
+
+static void __init
+centaur_mcr0_init(void)
+{
+ unsigned i;
+
+ /* Unfortunately, MCR's are read-only, so there is no way to
+ * find out what the bios might have done.
+ */
+
+ /* Clear any unconfigured MCR's.
+ * This way we are sure that the centaur_mcr array contains the actual
+ * values. The disadvantage is that any BIOS tweaks are thus undone.
+ *
+ */
+ for (i = 0; i < 8; ++i) {
+ if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
+ wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+ }
+
+ wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); /* Write only */
+}
+
+/*
+ * Initialise Winchip series MCR registers
+ */
+
+static void __init
+centaur_mcr_init(void)
+{
+ struct set_mtrr_context ctxt;
+
+ set_mtrr_prepare_save(&ctxt);
+ set_mtrr_cache_disable(&ctxt);
+
+ if (boot_cpu_data.x86_model == 4)
+ centaur_mcr0_init();
+ else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
+ centaur_mcr1_init();
+
+ set_mtrr_done(&ctxt);
+}
+#endif
+
+static int centaur_validate_add_page(unsigned long base,
+ unsigned long size, unsigned int type)
+{
+ /*
+ * FIXME: Winchip2 supports uncached
+ */
+ if (type != MTRR_TYPE_WRCOMB &&
+ (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
+ printk(KERN_WARNING
+ "mtrr: only write-combining%s supported\n",
+ centaur_mcr_type ? " and uncacheable are"
+ : " is");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct mtrr_ops centaur_mtrr_ops = {
+ .vendor = X86_VENDOR_CENTAUR,
+// .init = centaur_mcr_init,
+ .set = centaur_set_mcr,
+ .get = centaur_get_mcr,
+ .get_free_region = centaur_get_free_region,
+ .validate_add_page = centaur_validate_add_page,
+ .have_wrcomb = positive_have_wrcomb,
+};
+
+int __init centaur_init_mtrr(void)
+{
+ set_mtrr_ops(¢aur_mtrr_ops);
+ return 0;
+}
+
+//arch_initcall(centaur_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/changelog b/arch/i386/kernel/cpu/mtrr/changelog
new file mode 100644
index 0000000..af13685
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/changelog
@@ -0,0 +1,229 @@
+ ChangeLog
+
+ Prehistory Martin Tischhäuser <martin@ikcbarka.fzk.de>
+ Initial register-setting code (from proform-1.0).
+ 19971216 Richard Gooch <rgooch@atnf.csiro.au>
+ Original version for /proc/mtrr interface, SMP-safe.
+ v1.0
+ 19971217 Richard Gooch <rgooch@atnf.csiro.au>
+ Bug fix for ioctls()'s.
+ Added sample code in Documentation/mtrr.txt
+ v1.1
+ 19971218 Richard Gooch <rgooch@atnf.csiro.au>
+ Disallow overlapping regions.
+ 19971219 Jens Maurer <jmaurer@menuett.rhein-main.de>
+ Register-setting fixups.
+ v1.2
+ 19971222 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixups for kernel 2.1.75.
+ v1.3
+ 19971229 David Wragg <dpw@doc.ic.ac.uk>
+ Register-setting fixups and conformity with Intel conventions.
+ 19971229 Richard Gooch <rgooch@atnf.csiro.au>
+ Cosmetic changes and wrote this ChangeLog ;-)
+ 19980106 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixups for kernel 2.1.78.
+ v1.4
+ 19980119 David Wragg <dpw@doc.ic.ac.uk>
+ Included passive-release enable code (elsewhere in PCI setup).
+ v1.5
+ 19980131 Richard Gooch <rgooch@atnf.csiro.au>
+ Replaced global kernel lock with private spinlock.
+ v1.6
+ 19980201 Richard Gooch <rgooch@atnf.csiro.au>
+ Added wait for other CPUs to complete changes.
+ v1.7
+ 19980202 Richard Gooch <rgooch@atnf.csiro.au>
+ Bug fix in definition of <set_mtrr> for UP.
+ v1.8
+ 19980319 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixups for kernel 2.1.90.
+ 19980323 Richard Gooch <rgooch@atnf.csiro.au>
+ Move SMP BIOS fixup before secondary CPUs call <calibrate_delay>
+ v1.9
+ 19980325 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixed test for overlapping regions: confused by adjacent regions
+ 19980326 Richard Gooch <rgooch@atnf.csiro.au>
+ Added wbinvd in <set_mtrr_prepare>.
+ 19980401 Richard Gooch <rgooch@atnf.csiro.au>
+ Bug fix for non-SMP compilation.
+ 19980418 David Wragg <dpw@doc.ic.ac.uk>
+ Fixed-MTRR synchronisation for SMP and use atomic operations
+ instead of spinlocks.
+ 19980418 Richard Gooch <rgooch@atnf.csiro.au>
+ Differentiate different MTRR register classes for BIOS fixup.
+ v1.10
+ 19980419 David Wragg <dpw@doc.ic.ac.uk>
+ Bug fix in variable MTRR synchronisation.
+ v1.11
+ 19980419 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixups for kernel 2.1.97.
+ v1.12
+ 19980421 Richard Gooch <rgooch@atnf.csiro.au>
+ Safer synchronisation across CPUs when changing MTRRs.
+ v1.13
+ 19980423 Richard Gooch <rgooch@atnf.csiro.au>
+ Bugfix for SMP systems without MTRR support.
+ v1.14
+ 19980427 Richard Gooch <rgooch@atnf.csiro.au>
+ Trap calls to <mtrr_add> and <mtrr_del> on non-MTRR machines.
+ v1.15
+ 19980427 Richard Gooch <rgooch@atnf.csiro.au>
+ Use atomic bitops for setting SMP change mask.
+ v1.16
+ 19980428 Richard Gooch <rgooch@atnf.csiro.au>
+ Removed spurious diagnostic message.
+ v1.17
+ 19980429 Richard Gooch <rgooch@atnf.csiro.au>
+ Moved register-setting macros into this file.
+ Moved setup code from init/main.c to i386-specific areas.
+ v1.18
+ 19980502 Richard Gooch <rgooch@atnf.csiro.au>
+ Moved MTRR detection outside conditionals in <mtrr_init>.
+ v1.19
+ 19980502 Richard Gooch <rgooch@atnf.csiro.au>
+ Documentation improvement: mention Pentium II and AGP.
+ v1.20
+ 19980521 Richard Gooch <rgooch@atnf.csiro.au>
+ Only manipulate interrupt enable flag on local CPU.
+ Allow enclosed uncachable regions.
+ v1.21
+ 19980611 Richard Gooch <rgooch@atnf.csiro.au>
+ Always define <main_lock>.
+ v1.22
+ 19980901 Richard Gooch <rgooch@atnf.csiro.au>
+ Removed module support in order to tidy up code.
+ Added sanity check for <mtrr_add>/<mtrr_del> before <mtrr_init>.
+ Created addition queue for prior to SMP commence.
+ v1.23
+ 19980902 Richard Gooch <rgooch@atnf.csiro.au>
+ Ported patch to kernel 2.1.120-pre3.
+ v1.24
+ 19980910 Richard Gooch <rgooch@atnf.csiro.au>
+ Removed sanity checks and addition queue: Linus prefers an OOPS.
+ v1.25
+ 19981001 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixed harmless compiler warning in include/asm-i386/mtrr.h
+ Fixed version numbering and history for v1.23 -> v1.24.
+ v1.26
+ 19990118 Richard Gooch <rgooch@atnf.csiro.au>
+ Added devfs support.
+ v1.27
+ 19990123 Richard Gooch <rgooch@atnf.csiro.au>
+ Changed locking to spin with reschedule.
+ Made use of new <smp_call_function>.
+ v1.28
+ 19990201 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Extended the driver to be able to use Cyrix style ARRs.
+ 19990204 Richard Gooch <rgooch@atnf.csiro.au>
+ Restructured Cyrix support.
+ v1.29
+ 19990204 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Refined ARR support: enable MAPEN in set_mtrr_prepare()
+ and disable MAPEN in set_mtrr_done().
+ 19990205 Richard Gooch <rgooch@atnf.csiro.au>
+ Minor cleanups.
+ v1.30
+ 19990208 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Protect plain 6x86s (and other processors without the
+ Page Global Enable feature) against accessing CR4 in
+ set_mtrr_prepare() and set_mtrr_done().
+ 19990210 Richard Gooch <rgooch@atnf.csiro.au>
+ Turned <set_mtrr_up> and <get_mtrr> into function pointers.
+ v1.31
+ 19990212 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Major rewrite of cyrix_arr_init(): do not touch ARRs,
+ leave them as the BIOS have set them up.
+ Enable usage of all 8 ARRs.
+ Avoid multiplications by 3 everywhere and other
+ code clean ups/speed ups.
+ 19990213 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Set up other Cyrix processors identical to the boot cpu.
+ Since Cyrix don't support Intel APIC, this is l'art pour l'art.
+ Weigh ARRs by size:
+ If size <= 32M is given, set up ARR# we were given.
+ If size > 32M is given, set up ARR7 only if it is free,
+ fail otherwise.
+ 19990214 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Also check for size >= 256K if we are to set up ARR7,
+ mtrr_add() returns the value it gets from set_mtrr()
+ 19990218 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Remove Cyrix "coma bug" workaround from here.
+ Moved to linux/arch/i386/kernel/setup.c and
+ linux/include/asm-i386/bugs.h
+ 19990228 Richard Gooch <rgooch@atnf.csiro.au>
+ Added MTRRIOC_KILL_ENTRY ioctl(2)
+ Trap for counter underflow in <mtrr_file_del>.
+ Trap for 4 MiB aligned regions for PPro, stepping <= 7.
+ 19990301 Richard Gooch <rgooch@atnf.csiro.au>
+ Created <get_free_region> hook.
+ 19990305 Richard Gooch <rgooch@atnf.csiro.au>
+ Temporarily disable AMD support now MTRR capability flag is set.
+ v1.32
+ 19990308 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Adjust my changes (19990212-19990218) to Richard Gooch's
+ latest changes. (19990228-19990305)
+ v1.33
+ 19990309 Richard Gooch <rgooch@atnf.csiro.au>
+ Fixed typo in <printk> message.
+ 19990310 Richard Gooch <rgooch@atnf.csiro.au>
+ Support K6-II/III based on Alan Cox's <alan@redhat.com> patches.
+ v1.34
+ 19990511 Bart Hartgers <bart@etpmod.phys.tue.nl>
+ Support Centaur C6 MCR's.
+ 19990512 Richard Gooch <rgooch@atnf.csiro.au>
+ Minor cleanups.
+ v1.35
+ 19990707 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Check whether ARR3 is protected in cyrix_get_free_region()
+ and mtrr_del(). The code won't attempt to delete or change it
+ from now on if the BIOS protected ARR3. It silently skips ARR3
+ in cyrix_get_free_region() or returns with an error code from
+ mtrr_del().
+ 19990711 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Reset some bits in the CCRs in cyrix_arr_init() to disable SMM
+ if ARR3 isn't protected. This is needed because if SMM is active
+ and ARR3 isn't protected then deleting and setting ARR3 again
+ may lock up the processor. With SMM entirely disabled, it does
+ not happen.
+ 19990812 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Rearrange switch() statements so the driver accomodates to
+ the fact that the AMD Athlon handles its MTRRs the same way
+ as Intel does.
+ 19990814 Zoltán Böszörményi <zboszor@mail.externet.hu>
+ Double check for Intel in mtrr_add()'s big switch() because
+ that revision check is only valid for Intel CPUs.
+ 19990819 Alan Cox <alan@redhat.com>
+ Tested Zoltan's changes on a pre production Athlon - 100%
+ success.
+ 19991008 Manfred Spraul <manfreds@colorfullife.com>
+ replaced spin_lock_reschedule() with a normal semaphore.
+ v1.36
+ 20000221 Richard Gooch <rgooch@atnf.csiro.au>
+ Compile fix if procfs and devfs not enabled.
+ Formatting changes.
+ v1.37
+ 20001109 H. Peter Anvin <hpa@zytor.com>
+ Use the new centralized CPU feature detects.
+
+ v1.38
+ 20010309 Dave Jones <davej@suse.de>
+ Add support for Cyrix III.
+
+ v1.39
+ 20010312 Dave Jones <davej@suse.de>
+ Ugh, I broke AMD support.
+ Reworked fix by Troels Walsted Hansen <troels@thule.no>
+
+ v1.40
+ 20010327 Dave Jones <davej@suse.de>
+ Adapted Cyrix III support to include VIA C3.
+
+ v2.0
+ 20020306 Patrick Mochel <mochel@osdl.org>
+ Split mtrr.c -> mtrr/*.c
+ Converted to Linux Kernel Coding Style
+ Fixed several minor nits in form
+ Moved some SMP-only functions out, so they can be used
+ for power management in the future.
+ TODO: Fix user interface cruft.
diff --git a/arch/i386/kernel/cpu/mtrr/cyrix.c b/arch/i386/kernel/cpu/mtrr/cyrix.c
new file mode 100644
index 0000000..933b0dd
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/cyrix.c
@@ -0,0 +1,364 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include "mtrr.h"
+
+int arr3_protected;
+
+static void
+cyrix_get_arr(unsigned int reg, unsigned long *base,
+ unsigned int *size, mtrr_type * type)
+{
+ unsigned long flags;
+ unsigned char arr, ccr3, rcr, shift;
+
+ arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */
+
+ /* Save flags and disable interrupts */
+ local_irq_save(flags);
+
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ ((unsigned char *) base)[3] = getCx86(arr);
+ ((unsigned char *) base)[2] = getCx86(arr + 1);
+ ((unsigned char *) base)[1] = getCx86(arr + 2);
+ rcr = getCx86(CX86_RCR_BASE + reg);
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+
+ /* Enable interrupts if it was enabled previously */
+ local_irq_restore(flags);
+ shift = ((unsigned char *) base)[1] & 0x0f;
+ *base >>= PAGE_SHIFT;
+
+ /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+ * Note: shift==0xf means 4G, this is unsupported.
+ */
+ if (shift)
+ *size = (reg < 7 ? 0x1UL : 0x40UL) << (shift - 1);
+ else
+ *size = 0;
+
+ /* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */
+ if (reg < 7) {
+ switch (rcr) {
+ case 1:
+ *type = MTRR_TYPE_UNCACHABLE;
+ break;
+ case 8:
+ *type = MTRR_TYPE_WRBACK;
+ break;
+ case 9:
+ *type = MTRR_TYPE_WRCOMB;
+ break;
+ case 24:
+ default:
+ *type = MTRR_TYPE_WRTHROUGH;
+ break;
+ }
+ } else {
+ switch (rcr) {
+ case 0:
+ *type = MTRR_TYPE_UNCACHABLE;
+ break;
+ case 8:
+ *type = MTRR_TYPE_WRCOMB;
+ break;
+ case 9:
+ *type = MTRR_TYPE_WRBACK;
+ break;
+ case 25:
+ default:
+ *type = MTRR_TYPE_WRTHROUGH;
+ break;
+ }
+ }
+}
+
+static int
+cyrix_get_free_region(unsigned long base, unsigned long size)
+/* [SUMMARY] Get a free ARR.
+ <base> The starting (base) address of the region.
+ <size> The size (in bytes) of the region.
+ [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+ int i;
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned int lsize;
+
+ /* If we are to set up a region >32M then look at ARR7 immediately */
+ if (size > 0x2000) {
+ cyrix_get_arr(7, &lbase, &lsize, <ype);
+ if (lsize == 0)
+ return 7;
+ /* Else try ARR0-ARR6 first */
+ } else {
+ for (i = 0; i < 7; i++) {
+ cyrix_get_arr(i, &lbase, &lsize, <ype);
+ if ((i == 3) && arr3_protected)
+ continue;
+ if (lsize == 0)
+ return i;
+ }
+ /* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+ cyrix_get_arr(i, &lbase, &lsize, <ype);
+ if ((lsize == 0) && (size >= 0x40))
+ return i;
+ }
+ return -ENOSPC;
+}
+
+static u32 cr4 = 0;
+static u32 ccr3;
+
+static void prepare_set(void)
+{
+ u32 cr0;
+
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if ( cpu_has_pge ) {
+ cr4 = read_cr4();
+ write_cr4(cr4 & (unsigned char) ~(1 << 7));
+ }
+
+ /* Disable and flush caches. Note that wbinvd flushes the TLBs as
+ a side-effect */
+ cr0 = read_cr0() | 0x40000000;
+ wbinvd();
+ write_cr0(cr0);
+ wbinvd();
+
+ /* Cyrix ARRs - everything else were excluded at the top */
+ ccr3 = getCx86(CX86_CCR3);
+
+ /* Cyrix ARRs - everything else were excluded at the top */
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+
+}
+
+static void post_set(void)
+{
+ /* Flush caches and TLBs */
+ wbinvd();
+
+ /* Cyrix ARRs - everything else was excluded at the top */
+ setCx86(CX86_CCR3, ccr3);
+
+ /* Enable caches */
+ write_cr0(read_cr0() & 0xbfffffff);
+
+ /* Restore value of CR4 */
+ if ( cpu_has_pge )
+ write_cr4(cr4);
+}
+
+static void cyrix_set_arr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
+{
+ unsigned char arr, arr_type, arr_size;
+
+ arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */
+
+ /* count down from 32M (ARR0-ARR6) or from 2G (ARR7) */
+ if (reg >= 7)
+ size >>= 6;
+
+ size &= 0x7fff; /* make sure arr_size <= 14 */
+ for (arr_size = 0; size; arr_size++, size >>= 1) ;
+
+ if (reg < 7) {
+ switch (type) {
+ case MTRR_TYPE_UNCACHABLE:
+ arr_type = 1;
+ break;
+ case MTRR_TYPE_WRCOMB:
+ arr_type = 9;
+ break;
+ case MTRR_TYPE_WRTHROUGH:
+ arr_type = 24;
+ break;
+ default:
+ arr_type = 8;
+ break;
+ }
+ } else {
+ switch (type) {
+ case MTRR_TYPE_UNCACHABLE:
+ arr_type = 0;
+ break;
+ case MTRR_TYPE_WRCOMB:
+ arr_type = 8;
+ break;
+ case MTRR_TYPE_WRTHROUGH:
+ arr_type = 25;
+ break;
+ default:
+ arr_type = 9;
+ break;
+ }
+ }
+
+ prepare_set();
+
+ base <<= PAGE_SHIFT;
+ setCx86(arr, ((unsigned char *) &base)[3]);
+ setCx86(arr + 1, ((unsigned char *) &base)[2]);
+ setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+ setCx86(CX86_RCR_BASE + reg, arr_type);
+
+ post_set();
+}
+
+typedef struct {
+ unsigned long base;
+ unsigned int size;
+ mtrr_type type;
+} arr_state_t;
+
+static arr_state_t arr_state[8] __initdata = {
+ {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL},
+ {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}
+};
+
+static unsigned char ccr_state[7] __initdata = { 0, 0, 0, 0, 0, 0, 0 };
+
+static void cyrix_set_all(void)
+{
+ int i;
+
+ prepare_set();
+
+ /* the CCRs are not contiguous */
+ for (i = 0; i < 4; i++)
+ setCx86(CX86_CCR0 + i, ccr_state[i]);
+ for (; i < 7; i++)
+ setCx86(CX86_CCR4 + i, ccr_state[i]);
+ for (i = 0; i < 8; i++)
+ cyrix_set_arr(i, arr_state[i].base,
+ arr_state[i].size, arr_state[i].type);
+
+ post_set();
+}
+
+#if 0
+/*
+ * On Cyrix 6x86(MX) and M II the ARR3 is special: it has connection
+ * with the SMM (System Management Mode) mode. So we need the following:
+ * Check whether SMI_LOCK (CCR3 bit 0) is set
+ * if it is set, write a warning message: ARR3 cannot be changed!
+ * (it cannot be changed until the next processor reset)
+ * if it is reset, then we can change it, set all the needed bits:
+ * - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
+ * - disable access to SMM memory (CCR1 bit 2 reset)
+ * - disable SMM mode (CCR1 bit 1 reset)
+ * - disable write protection of ARR3 (CCR6 bit 1 reset)
+ * - (maybe) disable ARR3
+ * Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
+ */
+static void __init
+cyrix_arr_init(void)
+{
+ struct set_mtrr_context ctxt;
+ unsigned char ccr[7];
+ int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
+#ifdef CONFIG_SMP
+ int i;
+#endif
+
+ /* flush cache and enable MAPEN */
+ set_mtrr_prepare_save(&ctxt);
+ set_mtrr_cache_disable(&ctxt);
+
+ /* Save all CCRs locally */
+ ccr[0] = getCx86(CX86_CCR0);
+ ccr[1] = getCx86(CX86_CCR1);
+ ccr[2] = getCx86(CX86_CCR2);
+ ccr[3] = ctxt.ccr3;
+ ccr[4] = getCx86(CX86_CCR4);
+ ccr[5] = getCx86(CX86_CCR5);
+ ccr[6] = getCx86(CX86_CCR6);
+
+ if (ccr[3] & 1) {
+ ccrc[3] = 1;
+ arr3_protected = 1;
+ } else {
+ /* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
+ * access to SMM memory through ARR3 (bit 7).
+ */
+ if (ccr[1] & 0x80) {
+ ccr[1] &= 0x7f;
+ ccrc[1] |= 0x80;
+ }
+ if (ccr[1] & 0x04) {
+ ccr[1] &= 0xfb;
+ ccrc[1] |= 0x04;
+ }
+ if (ccr[1] & 0x02) {
+ ccr[1] &= 0xfd;
+ ccrc[1] |= 0x02;
+ }
+ arr3_protected = 0;
+ if (ccr[6] & 0x02) {
+ ccr[6] &= 0xfd;
+ ccrc[6] = 1; /* Disable write protection of ARR3 */
+ setCx86(CX86_CCR6, ccr[6]);
+ }
+ /* Disable ARR3. This is safe now that we disabled SMM. */
+ /* cyrix_set_arr_up (3, 0, 0, 0, FALSE); */
+ }
+ /* If we changed CCR1 in memory, change it in the processor, too. */
+ if (ccrc[1])
+ setCx86(CX86_CCR1, ccr[1]);
+
+ /* Enable ARR usage by the processor */
+ if (!(ccr[5] & 0x20)) {
+ ccr[5] |= 0x20;
+ ccrc[5] = 1;
+ setCx86(CX86_CCR5, ccr[5]);
+ }
+#ifdef CONFIG_SMP
+ for (i = 0; i < 7; i++)
+ ccr_state[i] = ccr[i];
+ for (i = 0; i < 8; i++)
+ cyrix_get_arr(i,
+ &arr_state[i].base, &arr_state[i].size,
+ &arr_state[i].type);
+#endif
+
+ set_mtrr_done(&ctxt); /* flush cache and disable MAPEN */
+
+ if (ccrc[5])
+ printk(KERN_INFO "mtrr: ARR usage was not enabled, enabled manually\n");
+ if (ccrc[3])
+ printk(KERN_INFO "mtrr: ARR3 cannot be changed\n");
+/*
+ if ( ccrc[1] & 0x80) printk ("mtrr: SMM memory access through ARR3 disabled\n");
+ if ( ccrc[1] & 0x04) printk ("mtrr: SMM memory access disabled\n");
+ if ( ccrc[1] & 0x02) printk ("mtrr: SMM mode disabled\n");
+*/
+ if (ccrc[6])
+ printk(KERN_INFO "mtrr: ARR3 was write protected, unprotected\n");
+}
+#endif
+
+static struct mtrr_ops cyrix_mtrr_ops = {
+ .vendor = X86_VENDOR_CYRIX,
+// .init = cyrix_arr_init,
+ .set_all = cyrix_set_all,
+ .set = cyrix_set_arr,
+ .get = cyrix_get_arr,
+ .get_free_region = cyrix_get_free_region,
+ .validate_add_page = generic_validate_add_page,
+ .have_wrcomb = positive_have_wrcomb,
+};
+
+int __init cyrix_init_mtrr(void)
+{
+ set_mtrr_ops(&cyrix_mtrr_ops);
+ return 0;
+}
+
+//arch_initcall(cyrix_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c
new file mode 100644
index 0000000..a4cce45
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/generic.c
@@ -0,0 +1,417 @@
+/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+ because MTRRs can span upto 40 bits (36bits on most modern x86) */
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/tlbflush.h>
+#include "mtrr.h"
+
+struct mtrr_state {
+ struct mtrr_var_range *var_ranges;
+ mtrr_type fixed_ranges[NUM_FIXED_RANGES];
+ unsigned char enabled;
+ mtrr_type def_type;
+};
+
+static unsigned long smp_changes_mask;
+static struct mtrr_state mtrr_state = {};
+
+/* Get the MSR pair relating to a var range */
+static void __init
+get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
+{
+ rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+ rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+}
+
+static void __init
+get_fixed_ranges(mtrr_type * frs)
+{
+ unsigned int *p = (unsigned int *) frs;
+ int i;
+
+ rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+
+ for (i = 0; i < 2; i++)
+ rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+ for (i = 0; i < 8; i++)
+ rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+}
+
+/* Grab all of the MTRR state for this CPU into *state */
+void __init get_mtrr_state(void)
+{
+ unsigned int i;
+ struct mtrr_var_range *vrs;
+ unsigned lo, dummy;
+
+ if (!mtrr_state.var_ranges) {
+ mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range),
+ GFP_KERNEL);
+ if (!mtrr_state.var_ranges)
+ return;
+ }
+ vrs = mtrr_state.var_ranges;
+
+ for (i = 0; i < num_var_ranges; i++)
+ get_mtrr_var_range(i, &vrs[i]);
+ get_fixed_ranges(mtrr_state.fixed_ranges);
+
+ rdmsr(MTRRdefType_MSR, lo, dummy);
+ mtrr_state.def_type = (lo & 0xff);
+ mtrr_state.enabled = (lo & 0xc00) >> 10;
+}
+
+/* Free resources associated with a struct mtrr_state */
+void __init finalize_mtrr_state(void)
+{
+ if (mtrr_state.var_ranges)
+ kfree(mtrr_state.var_ranges);
+ mtrr_state.var_ranges = NULL;
+}
+
+/* Some BIOS's are fucked and don't set all MTRRs the same! */
+void __init mtrr_state_warn(void)
+{
+ unsigned long mask = smp_changes_mask;
+
+ if (!mask)
+ return;
+ if (mask & MTRR_CHANGE_MASK_FIXED)
+ printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+ if (mask & MTRR_CHANGE_MASK_VARIABLE)
+ printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+ if (mask & MTRR_CHANGE_MASK_DEFTYPE)
+ printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+ printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
+ printk(KERN_INFO "mtrr: corrected configuration.\n");
+}
+
+/* Doesn't attempt to pass an error out to MTRR users
+ because it's quite complicated in some cases and probably not
+ worth it because the best error handling is to ignore it. */
+void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
+{
+ if (wrmsr_safe(msr, a, b) < 0)
+ printk(KERN_ERR
+ "MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
+ smp_processor_id(), msr, a, b);
+}
+
+int generic_get_free_region(unsigned long base, unsigned long size)
+/* [SUMMARY] Get a free MTRR.
+ <base> The starting (base) address of the region.
+ <size> The size (in bytes) of the region.
+ [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+ int i, max;
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned lsize;
+
+ max = num_var_ranges;
+ for (i = 0; i < max; ++i) {
+ mtrr_if->get(i, &lbase, &lsize, <ype);
+ if (lsize == 0)
+ return i;
+ }
+ return -ENOSPC;
+}
+
+void generic_get_mtrr(unsigned int reg, unsigned long *base,
+ unsigned int *size, mtrr_type * type)
+{
+ unsigned int mask_lo, mask_hi, base_lo, base_hi;
+
+ rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
+ if ((mask_lo & 0x800) == 0) {
+ /* Invalid (i.e. free) range */
+ *base = 0;
+ *size = 0;
+ *type = 0;
+ return;
+ }
+
+ rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
+
+ /* Work out the shifted address mask. */
+ mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
+ | mask_lo >> PAGE_SHIFT;
+
+ /* This works correctly if size is a power of two, i.e. a
+ contiguous range. */
+ *size = -mask_lo;
+ *base = base_hi << (32 - PAGE_SHIFT) | base_lo >> PAGE_SHIFT;
+ *type = base_lo & 0xff;
+}
+
+static int set_fixed_ranges(mtrr_type * frs)
+{
+ unsigned int *p = (unsigned int *) frs;
+ int changed = FALSE;
+ int i;
+ unsigned int lo, hi;
+
+ rdmsr(MTRRfix64K_00000_MSR, lo, hi);
+ if (p[0] != lo || p[1] != hi) {
+ mtrr_wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+ changed = TRUE;
+ }
+
+ for (i = 0; i < 2; i++) {
+ rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
+ if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
+ mtrr_wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
+ p[3 + i * 2]);
+ changed = TRUE;
+ }
+ }
+
+ for (i = 0; i < 8; i++) {
+ rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
+ if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
+ mtrr_wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
+ p[7 + i * 2]);
+ changed = TRUE;
+ }
+ }
+ return changed;
+}
+
+/* Set the MSR pair relating to a var range. Returns TRUE if
+ changes are made */
+static int set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
+{
+ unsigned int lo, hi;
+ int changed = FALSE;
+
+ rdmsr(MTRRphysBase_MSR(index), lo, hi);
+ if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
+ || (vr->base_hi & 0xfUL) != (hi & 0xfUL)) {
+ mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+ changed = TRUE;
+ }
+
+ rdmsr(MTRRphysMask_MSR(index), lo, hi);
+
+ if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL)
+ || (vr->mask_hi & 0xfUL) != (hi & 0xfUL)) {
+ mtrr_wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+ changed = TRUE;
+ }
+ return changed;
+}
+
+static unsigned long set_mtrr_state(u32 deftype_lo, u32 deftype_hi)
+/* [SUMMARY] Set the MTRR state for this CPU.
+ <state> The MTRR state information to read.
+ <ctxt> Some relevant CPU context.
+ [NOTE] The CPU must already be in a safe state for MTRR changes.
+ [RETURNS] 0 if no changes made, else a mask indication what was changed.
+*/
+{
+ unsigned int i;
+ unsigned long change_mask = 0;
+
+ for (i = 0; i < num_var_ranges; i++)
+ if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
+ change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+
+ if (set_fixed_ranges(mtrr_state.fixed_ranges))
+ change_mask |= MTRR_CHANGE_MASK_FIXED;
+
+ /* Set_mtrr_restore restores the old value of MTRRdefType,
+ so to set it we fiddle with the saved value */
+ if ((deftype_lo & 0xff) != mtrr_state.def_type
+ || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
+ deftype_lo |= (mtrr_state.def_type | mtrr_state.enabled << 10);
+ change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
+ }
+
+ return change_mask;
+}
+
+
+static unsigned long cr4 = 0;
+static u32 deftype_lo, deftype_hi;
+static DEFINE_SPINLOCK(set_atomicity_lock);
+
+/*
+ * Since we are disabling the cache don't allow any interrupts - they
+ * would run extremely slow and would only increase the pain. The caller must
+ * ensure that local interrupts are disabled and are reenabled after post_set()
+ * has been called.
+ */
+
+static void prepare_set(void)
+{
+ unsigned long cr0;
+
+ /* Note that this is not ideal, since the cache is only flushed/disabled
+ for this CPU while the MTRRs are changed, but changing this requires
+ more invasive changes to the way the kernel boots */
+
+ spin_lock(&set_atomicity_lock);
+
+ /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+ cr0 = read_cr0() | 0x40000000; /* set CD flag */
+ write_cr0(cr0);
+ wbinvd();
+
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if ( cpu_has_pge ) {
+ cr4 = read_cr4();
+ write_cr4(cr4 & ~X86_CR4_PGE);
+ }
+
+ /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+ __flush_tlb();
+
+ /* Save MTRR state */
+ rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+
+ /* Disable MTRRs, and set the default type to uncached */
+ mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi);
+}
+
+static void post_set(void)
+{
+ /* Flush TLBs (no need to flush caches - they are disabled) */
+ __flush_tlb();
+
+ /* Intel (P6) standard MTRRs */
+ mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+
+ /* Enable caches */
+ write_cr0(read_cr0() & 0xbfffffff);
+
+ /* Restore value of CR4 */
+ if ( cpu_has_pge )
+ write_cr4(cr4);
+ spin_unlock(&set_atomicity_lock);
+}
+
+static void generic_set_all(void)
+{
+ unsigned long mask, count;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ prepare_set();
+
+ /* Actually set the state */
+ mask = set_mtrr_state(deftype_lo,deftype_hi);
+
+ post_set();
+ local_irq_restore(flags);
+
+ /* Use the atomic bitops to update the global mask */
+ for (count = 0; count < sizeof mask * 8; ++count) {
+ if (mask & 0x01)
+ set_bit(count, &smp_changes_mask);
+ mask >>= 1;
+ }
+
+}
+
+static void generic_set_mtrr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
+/* [SUMMARY] Set variable MTRR register on the local CPU.
+ <reg> The register to set.
+ <base> The base address of the region.
+ <size> The size of the region. If this is 0 the region is disabled.
+ <type> The type of the region.
+ <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+ be done externally.
+ [RETURNS] Nothing.
+*/
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ prepare_set();
+
+ if (size == 0) {
+ /* The invalid bit is kept in the mask, so we simply clear the
+ relevant mask register to disable a range. */
+ mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
+ } else {
+ mtrr_wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
+ (base & size_and_mask) >> (32 - PAGE_SHIFT));
+ mtrr_wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
+ (-size & size_and_mask) >> (32 - PAGE_SHIFT));
+ }
+
+ post_set();
+ local_irq_restore(flags);
+}
+
+int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+ unsigned long lbase, last;
+
+ /* For Intel PPro stepping <= 7, must be 4 MiB aligned
+ and not touch 0x70000000->0x7003FFFF */
+ if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model == 1 &&
+ boot_cpu_data.x86_mask <= 7) {
+ if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
+ printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+ return -EINVAL;
+ }
+ if (!(base + size < 0x70000000 || base > 0x7003FFFF) &&
+ (type == MTRR_TYPE_WRCOMB
+ || type == MTRR_TYPE_WRBACK)) {
+ printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (base + size < 0x100) {
+ printk(KERN_WARNING "mtrr: cannot set region below 1 MiB (0x%lx000,0x%lx000)\n",
+ base, size);
+ return -EINVAL;
+ }
+ /* Check upper bits of base and last are equal and lower bits are 0
+ for base and 1 for last */
+ last = base + size - 1;
+ for (lbase = base; !(lbase & 1) && (last & 1);
+ lbase = lbase >> 1, last = last >> 1) ;
+ if (lbase != last) {
+ printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
+ base, size);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int generic_have_wrcomb(void)
+{
+ unsigned long config, dummy;
+ rdmsr(MTRRcap_MSR, config, dummy);
+ return (config & (1 << 10));
+}
+
+int positive_have_wrcomb(void)
+{
+ return 1;
+}
+
+/* generic structure...
+ */
+struct mtrr_ops generic_mtrr_ops = {
+ .use_intel_if = 1,
+ .set_all = generic_set_all,
+ .get = generic_get_mtrr,
+ .get_free_region = generic_get_free_region,
+ .set = generic_set_mtrr,
+ .validate_add_page = generic_validate_add_page,
+ .have_wrcomb = generic_have_wrcomb,
+};
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
new file mode 100644
index 0000000..1923e0a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -0,0 +1,374 @@
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+
+#define LINE_SIZE 80
+
+#include <asm/mtrr.h>
+#include "mtrr.h"
+
+/* RED-PEN: this is accessed without any locking */
+extern unsigned int *usage_table;
+
+
+#define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
+
+static char *mtrr_strings[MTRR_NUM_TYPES] =
+{
+ "uncachable", /* 0 */
+ "write-combining", /* 1 */
+ "?", /* 2 */
+ "?", /* 3 */
+ "write-through", /* 4 */
+ "write-protect", /* 5 */
+ "write-back", /* 6 */
+};
+
+char *mtrr_attrib_to_str(int x)
+{
+ return (x <= 6) ? mtrr_strings[x] : "?";
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int
+mtrr_file_add(unsigned long base, unsigned long size,
+ unsigned int type, char increment, struct file *file, int page)
+{
+ int reg, max;
+ unsigned int *fcount = FILE_FCOUNT(file);
+
+ max = num_var_ranges;
+ if (fcount == NULL) {
+ fcount = kmalloc(max * sizeof *fcount, GFP_KERNEL);
+ if (!fcount)
+ return -ENOMEM;
+ memset(fcount, 0, max * sizeof *fcount);
+ FILE_FCOUNT(file) = fcount;
+ }
+ if (!page) {
+ if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+ return -EINVAL;
+ base >>= PAGE_SHIFT;
+ size >>= PAGE_SHIFT;
+ }
+ reg = mtrr_add_page(base, size, type, 1);
+ if (reg >= 0)
+ ++fcount[reg];
+ return reg;
+}
+
+static int
+mtrr_file_del(unsigned long base, unsigned long size,
+ struct file *file, int page)
+{
+ int reg;
+ unsigned int *fcount = FILE_FCOUNT(file);
+
+ if (!page) {
+ if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+ return -EINVAL;
+ base >>= PAGE_SHIFT;
+ size >>= PAGE_SHIFT;
+ }
+ reg = mtrr_del_page(-1, base, size);
+ if (reg < 0)
+ return reg;
+ if (fcount == NULL)
+ return reg;
+ if (fcount[reg] < 1)
+ return -EINVAL;
+ --fcount[reg];
+ return reg;
+}
+
+/* RED-PEN: seq_file can seek now. this is ignored. */
+static ssize_t
+mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
+/* Format of control line:
+ "base=%Lx size=%Lx type=%s" OR:
+ "disable=%d"
+*/
+{
+ int i, err;
+ unsigned long reg;
+ unsigned long long base, size;
+ char *ptr;
+ char line[LINE_SIZE];
+ size_t linelen;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (!len)
+ return -EINVAL;
+ memset(line, 0, LINE_SIZE);
+ if (len > LINE_SIZE)
+ len = LINE_SIZE;
+ if (copy_from_user(line, buf, len - 1))
+ return -EFAULT;
+ linelen = strlen(line);
+ ptr = line + linelen - 1;
+ if (linelen && *ptr == '\n')
+ *ptr = '\0';
+ if (!strncmp(line, "disable=", 8)) {
+ reg = simple_strtoul(line + 8, &ptr, 0);
+ err = mtrr_del_page(reg, 0, 0);
+ if (err < 0)
+ return err;
+ return len;
+ }
+ if (strncmp(line, "base=", 5))
+ return -EINVAL;
+ base = simple_strtoull(line + 5, &ptr, 0);
+ for (; isspace(*ptr); ++ptr) ;
+ if (strncmp(ptr, "size=", 5))
+ return -EINVAL;
+ size = simple_strtoull(ptr + 5, &ptr, 0);
+ if ((base & 0xfff) || (size & 0xfff))
+ return -EINVAL;
+ for (; isspace(*ptr); ++ptr) ;
+ if (strncmp(ptr, "type=", 5))
+ return -EINVAL;
+ ptr += 5;
+ for (; isspace(*ptr); ++ptr) ;
+ for (i = 0; i < MTRR_NUM_TYPES; ++i) {
+ if (strcmp(ptr, mtrr_strings[i]))
+ continue;
+ base >>= PAGE_SHIFT;
+ size >>= PAGE_SHIFT;
+ err =
+ mtrr_add_page((unsigned long) base, (unsigned long) size, i,
+ 1);
+ if (err < 0)
+ return err;
+ return len;
+ }
+ return -EINVAL;
+}
+
+static int
+mtrr_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long __arg)
+{
+ int err;
+ mtrr_type type;
+ struct mtrr_sentry sentry;
+ struct mtrr_gentry gentry;
+ void __user *arg = (void __user *) __arg;
+
+ switch (cmd) {
+ default:
+ return -ENOTTY;
+ case MTRRIOC_ADD_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err =
+ mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+ file, 0);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_SET_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_DEL_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_file_del(sentry.base, sentry.size, file, 0);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_KILL_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_del(-1, sentry.base, sentry.size);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_GET_ENTRY:
+ if (copy_from_user(&gentry, arg, sizeof gentry))
+ return -EFAULT;
+ if (gentry.regnum >= num_var_ranges)
+ return -EINVAL;
+ mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+
+ /* Hide entries that go above 4GB */
+ if (gentry.base + gentry.size > 0x100000
+ || gentry.size == 0x100000)
+ gentry.base = gentry.size = gentry.type = 0;
+ else {
+ gentry.base <<= PAGE_SHIFT;
+ gentry.size <<= PAGE_SHIFT;
+ gentry.type = type;
+ }
+
+ if (copy_to_user(arg, &gentry, sizeof gentry))
+ return -EFAULT;
+ break;
+ case MTRRIOC_ADD_PAGE_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err =
+ mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+ file, 1);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_SET_PAGE_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_DEL_PAGE_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_file_del(sentry.base, sentry.size, file, 1);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_KILL_PAGE_ENTRY:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ err = mtrr_del_page(-1, sentry.base, sentry.size);
+ if (err < 0)
+ return err;
+ break;
+ case MTRRIOC_GET_PAGE_ENTRY:
+ if (copy_from_user(&gentry, arg, sizeof gentry))
+ return -EFAULT;
+ if (gentry.regnum >= num_var_ranges)
+ return -EINVAL;
+ mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+ gentry.type = type;
+
+ if (copy_to_user(arg, &gentry, sizeof gentry))
+ return -EFAULT;
+ break;
+ }
+ return 0;
+}
+
+static int
+mtrr_close(struct inode *ino, struct file *file)
+{
+ int i, max;
+ unsigned int *fcount = FILE_FCOUNT(file);
+
+ if (fcount != NULL) {
+ max = num_var_ranges;
+ for (i = 0; i < max; ++i) {
+ while (fcount[i] > 0) {
+ mtrr_del(i, 0, 0);
+ --fcount[i];
+ }
+ }
+ kfree(fcount);
+ FILE_FCOUNT(file) = NULL;
+ }
+ return single_release(ino, file);
+}
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset);
+
+static int mtrr_open(struct inode *inode, struct file *file)
+{
+ if (!mtrr_if)
+ return -EIO;
+ if (!mtrr_if->get)
+ return -ENXIO;
+ return single_open(file, mtrr_seq_show, NULL);
+}
+
+static struct file_operations mtrr_fops = {
+ .owner = THIS_MODULE,
+ .open = mtrr_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = mtrr_write,
+ .ioctl = mtrr_ioctl,
+ .release = mtrr_close,
+};
+
+
+static struct proc_dir_entry *proc_root_mtrr;
+
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset)
+{
+ char factor;
+ int i, max, len;
+ mtrr_type type;
+ unsigned long base;
+ unsigned int size;
+
+ len = 0;
+ max = num_var_ranges;
+ for (i = 0; i < max; i++) {
+ mtrr_if->get(i, &base, &size, &type);
+ if (size == 0)
+ usage_table[i] = 0;
+ else {
+ if (size < (0x100000 >> PAGE_SHIFT)) {
+ /* less than 1MB */
+ factor = 'K';
+ size <<= PAGE_SHIFT - 10;
+ } else {
+ factor = 'M';
+ size >>= 20 - PAGE_SHIFT;
+ }
+ /* RED-PEN: base can be > 32bit */
+ len += seq_printf(seq,
+ "reg%02i: base=0x%05lx000 (%4liMB), size=%4i%cB: %s, count=%d\n",
+ i, base, base >> (20 - PAGE_SHIFT), size, factor,
+ mtrr_attrib_to_str(type), usage_table[i]);
+ }
+ }
+ return 0;
+}
+
+static int __init mtrr_if_init(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ if ((!cpu_has(c, X86_FEATURE_MTRR)) &&
+ (!cpu_has(c, X86_FEATURE_K6_MTRR)) &&
+ (!cpu_has(c, X86_FEATURE_CYRIX_ARR)) &&
+ (!cpu_has(c, X86_FEATURE_CENTAUR_MCR)))
+ return -ENODEV;
+
+ proc_root_mtrr =
+ create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root);
+ if (proc_root_mtrr) {
+ proc_root_mtrr->owner = THIS_MODULE;
+ proc_root_mtrr->proc_fops = &mtrr_fops;
+ }
+ return 0;
+}
+
+arch_initcall(mtrr_if_init);
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
new file mode 100644
index 0000000..8f67b49
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -0,0 +1,693 @@
+/* Generic MTRR (Memory Type Range Register) driver.
+
+ Copyright (C) 1997-2000 Richard Gooch
+ Copyright (c) 2002 Patrick Mochel
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this library; if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Richard Gooch may be reached by email at rgooch@atnf.csiro.au
+ The postal address is:
+ Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+
+ Source: "Pentium Pro Family Developer's Manual, Volume 3:
+ Operating System Writer's Guide" (Intel document number 242692),
+ section 11.11.7
+
+ This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
+ on 6-7 March 2002.
+ Source: Intel Architecture Software Developers Manual, Volume 3:
+ System Programming Guide; Section 9.11. (1997 edition - PPro).
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/mtrr.h>
+
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+#define MTRR_VERSION "2.0 (20020519)"
+
+u32 num_var_ranges = 0;
+
+unsigned int *usage_table;
+static DECLARE_MUTEX(main_lock);
+
+u32 size_or_mask, size_and_mask;
+
+static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+
+struct mtrr_ops * mtrr_if = NULL;
+
+static void set_mtrr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type);
+
+extern int arr3_protected;
+
+void set_mtrr_ops(struct mtrr_ops * ops)
+{
+ if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
+ mtrr_ops[ops->vendor] = ops;
+}
+
+/* Returns non-zero if we have the write-combining memory type */
+static int have_wrcomb(void)
+{
+ struct pci_dev *dev;
+
+ if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
+ /* ServerWorks LE chipsets have problems with write-combining
+ Don't allow it and leave room for other chipsets to be tagged */
+ if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
+ dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
+ printk(KERN_INFO "mtrr: Serverworks LE detected. Write-combining disabled.\n");
+ pci_dev_put(dev);
+ return 0;
+ }
+ /* Intel 450NX errata # 23. Non ascending cachline evictions to
+ write combining memory may resulting in data corruption */
+ if (dev->vendor == PCI_VENDOR_ID_INTEL &&
+ dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
+ printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+ pci_dev_put(dev);
+ return 0;
+ }
+ pci_dev_put(dev);
+ }
+ return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+}
+
+/* This function returns the number of variable MTRRs */
+static void __init set_num_var_ranges(void)
+{
+ unsigned long config = 0, dummy;
+
+ if (use_intel()) {
+ rdmsr(MTRRcap_MSR, config, dummy);
+ } else if (is_cpu(AMD))
+ config = 2;
+ else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
+ config = 8;
+ num_var_ranges = config & 0xff;
+}
+
+static void __init init_table(void)
+{
+ int i, max;
+
+ max = num_var_ranges;
+ if ((usage_table = kmalloc(max * sizeof *usage_table, GFP_KERNEL))
+ == NULL) {
+ printk(KERN_ERR "mtrr: could not allocate\n");
+ return;
+ }
+ for (i = 0; i < max; i++)
+ usage_table[i] = 1;
+}
+
+struct set_mtrr_data {
+ atomic_t count;
+ atomic_t gate;
+ unsigned long smp_base;
+ unsigned long smp_size;
+ unsigned int smp_reg;
+ mtrr_type smp_type;
+};
+
+#ifdef CONFIG_SMP
+
+static void ipi_handler(void *info)
+/* [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
+ [RETURNS] Nothing.
+*/
+{
+ struct set_mtrr_data *data = info;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ atomic_dec(&data->count);
+ while(!atomic_read(&data->gate))
+ cpu_relax();
+
+ /* The master has cleared me to execute */
+ if (data->smp_reg != ~0U)
+ mtrr_if->set(data->smp_reg, data->smp_base,
+ data->smp_size, data->smp_type);
+ else
+ mtrr_if->set_all();
+
+ atomic_dec(&data->count);
+ while(atomic_read(&data->gate))
+ cpu_relax();
+
+ atomic_dec(&data->count);
+ local_irq_restore(flags);
+}
+
+#endif
+
+/**
+ * set_mtrr - update mtrrs on all processors
+ * @reg: mtrr in question
+ * @base: mtrr base
+ * @size: mtrr size
+ * @type: mtrr type
+ *
+ * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
+ *
+ * 1. Send IPI to do the following:
+ * 2. Disable Interrupts
+ * 3. Wait for all procs to do so
+ * 4. Enter no-fill cache mode
+ * 5. Flush caches
+ * 6. Clear PGE bit
+ * 7. Flush all TLBs
+ * 8. Disable all range registers
+ * 9. Update the MTRRs
+ * 10. Enable all range registers
+ * 11. Flush all TLBs and caches again
+ * 12. Enter normal cache mode and reenable caching
+ * 13. Set PGE
+ * 14. Wait for buddies to catch up
+ * 15. Enable interrupts.
+ *
+ * What does that mean for us? Well, first we set data.count to the number
+ * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
+ * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it
+ * differently, so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate to
+ * be reset.
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Everyone then enables interrupts and we all continue on.
+ *
+ * Note that the mechanism is the same for UP systems, too; all the SMP stuff
+ * becomes nops.
+ */
+static void set_mtrr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
+{
+ struct set_mtrr_data data;
+ unsigned long flags;
+
+ data.smp_reg = reg;
+ data.smp_base = base;
+ data.smp_size = size;
+ data.smp_type = type;
+ atomic_set(&data.count, num_booting_cpus() - 1);
+ atomic_set(&data.gate,0);
+
+ /* Start the ball rolling on other CPUs */
+ if (smp_call_function(ipi_handler, &data, 1, 0) != 0)
+ panic("mtrr: timed out waiting for other CPUs\n");
+
+ local_irq_save(flags);
+
+ while(atomic_read(&data.count))
+ cpu_relax();
+
+ /* ok, reset count and toggle gate */
+ atomic_set(&data.count, num_booting_cpus() - 1);
+ atomic_set(&data.gate,1);
+
+ /* do our MTRR business */
+
+ /* HACK!
+ * We use this same function to initialize the mtrrs on boot.
+ * The state of the boot cpu's mtrrs has been saved, and we want
+ * to replicate across all the APs.
+ * If we're doing that @reg is set to something special...
+ */
+ if (reg != ~0U)
+ mtrr_if->set(reg,base,size,type);
+
+ /* wait for the others */
+ while(atomic_read(&data.count))
+ cpu_relax();
+
+ atomic_set(&data.count, num_booting_cpus() - 1);
+ atomic_set(&data.gate,0);
+
+ /*
+ * Wait here for everyone to have seen the gate change
+ * So we're the last ones to touch 'data'
+ */
+ while(atomic_read(&data.count))
+ cpu_relax();
+
+ local_irq_restore(flags);
+}
+
+/**
+ * mtrr_add_page - Add a memory type region
+ * @base: Physical base address of region in pages (4 KB)
+ * @size: Physical size of region in pages (4 KB)
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
+ *
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
+ *
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
+ *
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
+ *
+ * The available types are
+ *
+ * %MTRR_TYPE_UNCACHABLE - No caching
+ *
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ *
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ *
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ *
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
+ */
+
+int mtrr_add_page(unsigned long base, unsigned long size,
+ unsigned int type, char increment)
+{
+ int i;
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned int lsize;
+ int error;
+
+ if (!mtrr_if)
+ return -ENXIO;
+
+ if ((error = mtrr_if->validate_add_page(base,size,type)))
+ return error;
+
+ if (type >= MTRR_NUM_TYPES) {
+ printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+ return -EINVAL;
+ }
+
+ /* If the type is WC, check that this processor supports it */
+ if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
+ printk(KERN_WARNING
+ "mtrr: your processor doesn't support write-combining\n");
+ return -ENOSYS;
+ }
+
+ if (base & size_or_mask || size & size_or_mask) {
+ printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+ return -EINVAL;
+ }
+
+ error = -EINVAL;
+
+ /* Search for existing MTRR */
+ down(&main_lock);
+ for (i = 0; i < num_var_ranges; ++i) {
+ mtrr_if->get(i, &lbase, &lsize, <ype);
+ if (base >= lbase + lsize)
+ continue;
+ if ((base < lbase) && (base + size <= lbase))
+ continue;
+ /* At this point we know there is some kind of overlap/enclosure */
+ if ((base < lbase) || (base + size > lbase + lsize)) {
+ printk(KERN_WARNING
+ "mtrr: 0x%lx000,0x%lx000 overlaps existing"
+ " 0x%lx000,0x%x000\n", base, size, lbase,
+ lsize);
+ goto out;
+ }
+ /* New region is enclosed by an existing region */
+ if (ltype != type) {
+ if (type == MTRR_TYPE_UNCACHABLE)
+ continue;
+ printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+ base, size, mtrr_attrib_to_str(ltype),
+ mtrr_attrib_to_str(type));
+ goto out;
+ }
+ if (increment)
+ ++usage_table[i];
+ error = i;
+ goto out;
+ }
+ /* Search for an empty MTRR */
+ i = mtrr_if->get_free_region(base, size);
+ if (i >= 0) {
+ set_mtrr(i, base, size, type);
+ usage_table[i] = 1;
+ } else
+ printk(KERN_INFO "mtrr: no more MTRRs available\n");
+ error = i;
+ out:
+ up(&main_lock);
+ return error;
+}
+
+/**
+ * mtrr_add - Add a memory type region
+ * @base: Physical base address of region
+ * @size: Physical size of region
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
+ *
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
+ *
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
+ *
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
+ *
+ * The available types are
+ *
+ * %MTRR_TYPE_UNCACHABLE - No caching
+ *
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ *
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ *
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ *
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
+ */
+
+int
+mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+ char increment)
+{
+ if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+ printk(KERN_WARNING "mtrr: size and base must be multiples of 4 kiB\n");
+ printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ return -EINVAL;
+ }
+ return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
+ increment);
+}
+
+/**
+ * mtrr_del_page - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
+ *
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
+ *
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
+ */
+
+int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+ int i, max;
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned int lsize;
+ int error = -EINVAL;
+
+ if (!mtrr_if)
+ return -ENXIO;
+
+ max = num_var_ranges;
+ down(&main_lock);
+ if (reg < 0) {
+ /* Search for existing MTRR */
+ for (i = 0; i < max; ++i) {
+ mtrr_if->get(i, &lbase, &lsize, <ype);
+ if (lbase == base && lsize == size) {
+ reg = i;
+ break;
+ }
+ }
+ if (reg < 0) {
+ printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
+ size);
+ goto out;
+ }
+ }
+ if (reg >= max) {
+ printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+ goto out;
+ }
+ if (is_cpu(CYRIX) && !use_intel()) {
+ if ((reg == 3) && arr3_protected) {
+ printk(KERN_WARNING "mtrr: ARR3 cannot be changed\n");
+ goto out;
+ }
+ }
+ mtrr_if->get(reg, &lbase, &lsize, <ype);
+ if (lsize < 1) {
+ printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+ goto out;
+ }
+ if (usage_table[reg] < 1) {
+ printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+ goto out;
+ }
+ if (--usage_table[reg] < 1)
+ set_mtrr(reg, 0, 0, 0);
+ error = reg;
+ out:
+ up(&main_lock);
+ return error;
+}
+/**
+ * mtrr_del - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
+ *
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
+ *
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
+ */
+
+int
+mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+ if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+ printk(KERN_INFO "mtrr: size and base must be multiples of 4 kiB\n");
+ printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ return -EINVAL;
+ }
+ return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
+}
+
+EXPORT_SYMBOL(mtrr_add);
+EXPORT_SYMBOL(mtrr_del);
+
+/* HACK ALERT!
+ * These should be called implicitly, but we can't yet until all the initcall
+ * stuff is done...
+ */
+extern void amd_init_mtrr(void);
+extern void cyrix_init_mtrr(void);
+extern void centaur_init_mtrr(void);
+
+static void __init init_ifs(void)
+{
+ amd_init_mtrr();
+ cyrix_init_mtrr();
+ centaur_init_mtrr();
+}
+
+static void __init init_other_cpus(void)
+{
+ if (use_intel())
+ get_mtrr_state();
+
+ /* bring up the other processors */
+ set_mtrr(~0U,0,0,0);
+
+ if (use_intel()) {
+ finalize_mtrr_state();
+ mtrr_state_warn();
+ }
+}
+
+
+struct mtrr_value {
+ mtrr_type ltype;
+ unsigned long lbase;
+ unsigned int lsize;
+};
+
+static struct mtrr_value * mtrr_state;
+
+static int mtrr_save(struct sys_device * sysdev, u32 state)
+{
+ int i;
+ int size = num_var_ranges * sizeof(struct mtrr_value);
+
+ mtrr_state = kmalloc(size,GFP_ATOMIC);
+ if (mtrr_state)
+ memset(mtrr_state,0,size);
+ else
+ return -ENOMEM;
+
+ for (i = 0; i < num_var_ranges; i++) {
+ mtrr_if->get(i,
+ &mtrr_state[i].lbase,
+ &mtrr_state[i].lsize,
+ &mtrr_state[i].ltype);
+ }
+ return 0;
+}
+
+static int mtrr_restore(struct sys_device * sysdev)
+{
+ int i;
+
+ for (i = 0; i < num_var_ranges; i++) {
+ if (mtrr_state[i].lsize)
+ set_mtrr(i,
+ mtrr_state[i].lbase,
+ mtrr_state[i].lsize,
+ mtrr_state[i].ltype);
+ }
+ kfree(mtrr_state);
+ return 0;
+}
+
+
+
+static struct sysdev_driver mtrr_sysdev_driver = {
+ .suspend = mtrr_save,
+ .resume = mtrr_restore,
+};
+
+
+/**
+ * mtrr_init - initialize mtrrs on the boot CPU
+ *
+ * This needs to be called early; before any of the other CPUs are
+ * initialized (i.e. before smp_init()).
+ *
+ */
+static int __init mtrr_init(void)
+{
+ init_ifs();
+
+ if (cpu_has_mtrr) {
+ mtrr_if = &generic_mtrr_ops;
+ size_or_mask = 0xff000000; /* 36 bits */
+ size_and_mask = 0x00f00000;
+
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ /* The original Athlon docs said that
+ total addressable memory is 44 bits wide.
+ It was not really clear whether its MTRRs
+ follow this or not. (Read: 44 or 36 bits).
+ However, "x86-64_overview.pdf" explicitly
+ states that "previous implementations support
+ 36 bit MTRRs" and also provides a way to
+ query the width (in bits) of the physical
+ addressable memory on the Hammer family.
+ */
+ if (boot_cpu_data.x86 == 15
+ && (cpuid_eax(0x80000000) >= 0x80000008)) {
+ u32 phys_addr;
+ phys_addr = cpuid_eax(0x80000008) & 0xff;
+ size_or_mask =
+ ~((1 << (phys_addr - PAGE_SHIFT)) - 1);
+ size_and_mask = ~size_or_mask & 0xfff00000;
+ }
+ /* Athlon MTRRs use an Intel-compatible interface for
+ * getting and setting */
+ break;
+ case X86_VENDOR_CENTAUR:
+ if (boot_cpu_data.x86 == 6) {
+ /* VIA Cyrix family have Intel style MTRRs, but don't support PAE */
+ size_or_mask = 0xfff00000; /* 32 bits */
+ size_and_mask = 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+ } else {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (cpu_has_k6_mtrr) {
+ /* Pre-Athlon (K6) AMD CPU MTRRs */
+ mtrr_if = mtrr_ops[X86_VENDOR_AMD];
+ size_or_mask = 0xfff00000; /* 32 bits */
+ size_and_mask = 0;
+ }
+ break;
+ case X86_VENDOR_CENTAUR:
+ if (cpu_has_centaur_mcr) {
+ mtrr_if = mtrr_ops[X86_VENDOR_CENTAUR];
+ size_or_mask = 0xfff00000; /* 32 bits */
+ size_and_mask = 0;
+ }
+ break;
+ case X86_VENDOR_CYRIX:
+ if (cpu_has_cyrix_arr) {
+ mtrr_if = mtrr_ops[X86_VENDOR_CYRIX];
+ size_or_mask = 0xfff00000; /* 32 bits */
+ size_and_mask = 0;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ printk(KERN_INFO "mtrr: v%s\n",MTRR_VERSION);
+
+ if (mtrr_if) {
+ set_num_var_ranges();
+ init_table();
+ init_other_cpus();
+
+ return sysdev_driver_register(&cpu_sysdev_class,
+ &mtrr_sysdev_driver);
+ }
+ return -ENXIO;
+}
+
+subsys_initcall(mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h
new file mode 100644
index 0000000..de13512
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/mtrr.h
@@ -0,0 +1,98 @@
+/*
+ * local mtrr defines.
+ */
+
+#ifndef TRUE
+#define TRUE 1
+#define FALSE 0
+#endif
+
+#define MTRRcap_MSR 0x0fe
+#define MTRRdefType_MSR 0x2ff
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define NUM_FIXED_RANGES 88
+#define MTRRfix64K_00000_MSR 0x250
+#define MTRRfix16K_80000_MSR 0x258
+#define MTRRfix16K_A0000_MSR 0x259
+#define MTRRfix4K_C0000_MSR 0x268
+#define MTRRfix4K_C8000_MSR 0x269
+#define MTRRfix4K_D0000_MSR 0x26a
+#define MTRRfix4K_D8000_MSR 0x26b
+#define MTRRfix4K_E0000_MSR 0x26c
+#define MTRRfix4K_E8000_MSR 0x26d
+#define MTRRfix4K_F0000_MSR 0x26e
+#define MTRRfix4K_F8000_MSR 0x26f
+
+#define MTRR_CHANGE_MASK_FIXED 0x01
+#define MTRR_CHANGE_MASK_VARIABLE 0x02
+#define MTRR_CHANGE_MASK_DEFTYPE 0x04
+
+/* In the Intel processor's MTRR interface, the MTRR type is always held in
+ an 8 bit field: */
+typedef u8 mtrr_type;
+
+struct mtrr_ops {
+ u32 vendor;
+ u32 use_intel_if;
+// void (*init)(void);
+ void (*set)(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type);
+ void (*set_all)(void);
+
+ void (*get)(unsigned int reg, unsigned long *base,
+ unsigned int *size, mtrr_type * type);
+ int (*get_free_region) (unsigned long base, unsigned long size);
+
+ int (*validate_add_page)(unsigned long base, unsigned long size,
+ unsigned int type);
+ int (*have_wrcomb)(void);
+};
+
+extern int generic_get_free_region(unsigned long base, unsigned long size);
+extern int generic_validate_add_page(unsigned long base, unsigned long size,
+ unsigned int type);
+
+extern struct mtrr_ops generic_mtrr_ops;
+
+extern int positive_have_wrcomb(void);
+
+/* library functions for processor-specific routines */
+struct set_mtrr_context {
+ unsigned long flags;
+ unsigned long deftype_lo;
+ unsigned long deftype_hi;
+ unsigned long cr4val;
+ unsigned long ccr3;
+};
+
+struct mtrr_var_range {
+ unsigned long base_lo;
+ unsigned long base_hi;
+ unsigned long mask_lo;
+ unsigned long mask_hi;
+};
+
+void set_mtrr_done(struct set_mtrr_context *ctxt);
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
+
+void get_mtrr_state(void);
+
+extern void set_mtrr_ops(struct mtrr_ops * ops);
+
+extern u32 size_or_mask, size_and_mask;
+extern struct mtrr_ops * mtrr_if;
+
+#define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
+#define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1)
+
+extern unsigned int num_var_ranges;
+
+void finalize_mtrr_state(void);
+void mtrr_state_warn(void);
+char *mtrr_attrib_to_str(int x);
+void mtrr_wrmsr(unsigned, unsigned, unsigned);
+
diff --git a/arch/i386/kernel/cpu/mtrr/state.c b/arch/i386/kernel/cpu/mtrr/state.c
new file mode 100644
index 0000000..f62ecd1
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/state.c
@@ -0,0 +1,78 @@
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+
+/* Put the processor into a state where MTRRs can be safely set */
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
+{
+ unsigned int cr0;
+
+ /* Disable interrupts locally */
+ local_irq_save(ctxt->flags);
+
+ if (use_intel() || is_cpu(CYRIX)) {
+
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if ( cpu_has_pge ) {
+ ctxt->cr4val = read_cr4();
+ write_cr4(ctxt->cr4val & (unsigned char) ~(1 << 7));
+ }
+
+ /* Disable and flush caches. Note that wbinvd flushes the TLBs as
+ a side-effect */
+ cr0 = read_cr0() | 0x40000000;
+ wbinvd();
+ write_cr0(cr0);
+ wbinvd();
+
+ if (use_intel())
+ /* Save MTRR state */
+ rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ else
+ /* Cyrix ARRs - everything else were excluded at the top */
+ ctxt->ccr3 = getCx86(CX86_CCR3);
+ }
+}
+
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
+{
+ if (use_intel())
+ /* Disable MTRRs, and set the default type to uncached */
+ mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+ ctxt->deftype_hi);
+ else if (is_cpu(CYRIX))
+ /* Cyrix ARRs - everything else were excluded at the top */
+ setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+}
+
+/* Restore the processor after a set_mtrr_prepare */
+void set_mtrr_done(struct set_mtrr_context *ctxt)
+{
+ if (use_intel() || is_cpu(CYRIX)) {
+
+ /* Flush caches and TLBs */
+ wbinvd();
+
+ /* Restore MTRRdefType */
+ if (use_intel())
+ /* Intel (P6) standard MTRRs */
+ mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ else
+ /* Cyrix ARRs - everything else was excluded at the top */
+ setCx86(CX86_CCR3, ctxt->ccr3);
+
+ /* Enable caches */
+ write_cr0(read_cr0() & 0xbfffffff);
+
+ /* Restore value of CR4 */
+ if ( cpu_has_pge )
+ write_cr4(ctxt->cr4val);
+ }
+ /* Re-enable interrupts locally (if enabled previously) */
+ local_irq_restore(ctxt->flags);
+}
+
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c
new file mode 100644
index 0000000..30898a2
--- /dev/null
+++ b/arch/i386/kernel/cpu/nexgen.c
@@ -0,0 +1,63 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ * Detect a NexGen CPU running without BIOS hypercode new enough
+ * to have CPUID. (Thanks to Herbert Oppmann)
+ */
+
+static int __init deep_magic_nexgen_probe(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ " movw $0x5555, %%ax\n"
+ " xorw %%dx,%%dx\n"
+ " movw $2, %%cx\n"
+ " divw %%cx\n"
+ " movl $0, %%eax\n"
+ " jnz 1f\n"
+ " movl $1, %%eax\n"
+ "1:\n"
+ : "=a" (ret) : : "cx", "dx" );
+ return ret;
+}
+
+static void __init init_nexgen(struct cpuinfo_x86 * c)
+{
+ c->x86_cache_size = 256; /* A few had 1 MB... */
+}
+
+static void __init nexgen_identify(struct cpuinfo_x86 * c)
+{
+ /* Detect NexGen with old hypercode */
+ if ( deep_magic_nexgen_probe() ) {
+ strcpy(c->x86_vendor_id, "NexGenDriven");
+ }
+ generic_identify(c);
+}
+
+static struct cpu_dev nexgen_cpu_dev __initdata = {
+ .c_vendor = "Nexgen",
+ .c_ident = { "NexGenDriven" },
+ .c_models = {
+ { .vendor = X86_VENDOR_NEXGEN,
+ .family = 5,
+ .model_names = { [1] = "Nx586" }
+ },
+ },
+ .c_init = init_nexgen,
+ .c_identify = nexgen_identify,
+};
+
+int __init nexgen_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(nexgen_init_cpu);
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
new file mode 100644
index 0000000..c8d83fd
--- /dev/null
+++ b/arch/i386/kernel/cpu/proc.c
@@ -0,0 +1,149 @@
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/string.h>
+#include <asm/semaphore.h>
+#include <linux/seq_file.h>
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ /*
+ * These flag bits must match the definitions in <asm/cpufeature.h>.
+ * NULL means this bit is undefined or reserved; either way it doesn't
+ * have meaning as far as Linux is concerned. Note that it's important
+ * to realize there is a difference between this table and CPUID -- if
+ * applications want to get the raw CPUID data, they should access
+ * /dev/cpu/<cpu_nr>/cpuid instead.
+ */
+ static char *x86_cap_flags[] = {
+ /* Intel-defined */
+ "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+ "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+ "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+ "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
+
+ /* AMD-defined */
+ "pni", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
+ NULL, "fxsr_opt", NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
+
+ /* Transmeta-defined */
+ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* Other (Linux-defined) */
+ "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* Intel-defined (#2) */
+ "pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+ "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* VIA/Cyrix/Centaur-defined */
+ NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* AMD-defined (#2) */
+ "lahf_lm", "cmp_legacy", NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ };
+ struct cpuinfo_x86 *c = v;
+ int i, n = c - cpu_data;
+ int fpu_exception;
+
+#ifdef CONFIG_SMP
+ if (!cpu_online(n))
+ return 0;
+#endif
+ seq_printf(m, "processor\t: %d\n"
+ "vendor_id\t: %s\n"
+ "cpu family\t: %d\n"
+ "model\t\t: %d\n"
+ "model name\t: %s\n",
+ n,
+ c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+ c->x86,
+ c->x86_model,
+ c->x86_model_id[0] ? c->x86_model_id : "unknown");
+
+ if (c->x86_mask || c->cpuid_level >= 0)
+ seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+ else
+ seq_printf(m, "stepping\t: unknown\n");
+
+ if ( cpu_has(c, X86_FEATURE_TSC) ) {
+ seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n",
+ cpu_khz / 1000, (cpu_khz % 1000));
+ }
+
+ /* Cache size */
+ if (c->x86_cache_size >= 0)
+ seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+#ifdef CONFIG_X86_HT
+ seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]);
+ seq_printf(m, "siblings\t: %d\n", c->x86_num_cores * smp_num_siblings);
+#endif
+
+ /* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
+ fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+ seq_printf(m, "fdiv_bug\t: %s\n"
+ "hlt_bug\t\t: %s\n"
+ "f00f_bug\t: %s\n"
+ "coma_bug\t: %s\n"
+ "fpu\t\t: %s\n"
+ "fpu_exception\t: %s\n"
+ "cpuid level\t: %d\n"
+ "wp\t\t: %s\n"
+ "flags\t\t:",
+ c->fdiv_bug ? "yes" : "no",
+ c->hlt_works_ok ? "no" : "yes",
+ c->f00f_bug ? "yes" : "no",
+ c->coma_bug ? "yes" : "no",
+ c->hard_math ? "yes" : "no",
+ fpu_exception ? "yes" : "no",
+ c->cpuid_level,
+ c->wp_works_ok ? "yes" : "no");
+
+ for ( i = 0 ; i < 32*NCAPINTS ; i++ )
+ if ( test_bit(i, c->x86_capability) &&
+ x86_cap_flags[i] != NULL )
+ seq_printf(m, " %s", x86_cap_flags[i]);
+
+ seq_printf(m, "\nbogomips\t: %lu.%02lu\n\n",
+ c->loops_per_jiffy/(500000/HZ),
+ (c->loops_per_jiffy/(5000/HZ)) % 100);
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c
new file mode 100644
index 0000000..8602425
--- /dev/null
+++ b/arch/i386/kernel/cpu/rise.c
@@ -0,0 +1,53 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __init init_rise(struct cpuinfo_x86 *c)
+{
+ printk("CPU: Rise iDragon");
+ if (c->x86_model > 2)
+ printk(" II");
+ printk("\n");
+
+ /* Unhide possibly hidden capability flags
+ The mp6 iDragon family don't have MSRs.
+ We switch on extra features with this cpuid weirdness: */
+ __asm__ (
+ "movl $0x6363452a, %%eax\n\t"
+ "movl $0x3231206c, %%ecx\n\t"
+ "movl $0x2a32313a, %%edx\n\t"
+ "cpuid\n\t"
+ "movl $0x63634523, %%eax\n\t"
+ "movl $0x32315f6c, %%ecx\n\t"
+ "movl $0x2333313a, %%edx\n\t"
+ "cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
+ );
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+}
+
+static struct cpu_dev rise_cpu_dev __initdata = {
+ .c_vendor = "Rise",
+ .c_ident = { "RiseRiseRise" },
+ .c_models = {
+ { .vendor = X86_VENDOR_RISE, .family = 5, .model_names =
+ {
+ [0] = "iDragon",
+ [2] = "iDragon",
+ [8] = "iDragon II",
+ [9] = "iDragon II"
+ }
+ },
+ },
+ .c_init = init_rise,
+};
+
+int __init rise_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_RISE] = &rise_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(rise_init_cpu);
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
new file mode 100644
index 0000000..f57e5ee
--- /dev/null
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -0,0 +1,107 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+static void __init init_transmeta(struct cpuinfo_x86 *c)
+{
+ unsigned int cap_mask, uk, max, dummy;
+ unsigned int cms_rev1, cms_rev2;
+ unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev;
+ char cpu_info[65];
+
+ get_model_name(c); /* Same as AMD/Cyrix */
+ display_cacheinfo(c);
+
+ /* Print CMS and CPU revision */
+ max = cpuid_eax(0x80860000);
+ cpu_rev = 0;
+ if ( max >= 0x80860001 ) {
+ cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
+ if (cpu_rev != 0x02000000) {
+ printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+ (cpu_rev >> 24) & 0xff,
+ (cpu_rev >> 16) & 0xff,
+ (cpu_rev >> 8) & 0xff,
+ cpu_rev & 0xff,
+ cpu_freq);
+ }
+ }
+ if ( max >= 0x80860002 ) {
+ cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
+ if (cpu_rev == 0x02000000) {
+ printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
+ new_cpu_rev, cpu_freq);
+ }
+ printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+ (cms_rev1 >> 24) & 0xff,
+ (cms_rev1 >> 16) & 0xff,
+ (cms_rev1 >> 8) & 0xff,
+ cms_rev1 & 0xff,
+ cms_rev2);
+ }
+ if ( max >= 0x80860006 ) {
+ cpuid(0x80860003,
+ (void *)&cpu_info[0],
+ (void *)&cpu_info[4],
+ (void *)&cpu_info[8],
+ (void *)&cpu_info[12]);
+ cpuid(0x80860004,
+ (void *)&cpu_info[16],
+ (void *)&cpu_info[20],
+ (void *)&cpu_info[24],
+ (void *)&cpu_info[28]);
+ cpuid(0x80860005,
+ (void *)&cpu_info[32],
+ (void *)&cpu_info[36],
+ (void *)&cpu_info[40],
+ (void *)&cpu_info[44]);
+ cpuid(0x80860006,
+ (void *)&cpu_info[48],
+ (void *)&cpu_info[52],
+ (void *)&cpu_info[56],
+ (void *)&cpu_info[60]);
+ cpu_info[64] = '\0';
+ printk(KERN_INFO "CPU: %s\n", cpu_info);
+ }
+
+ /* Unhide possibly hidden capability flags */
+ rdmsr(0x80860004, cap_mask, uk);
+ wrmsr(0x80860004, ~0, uk);
+ c->x86_capability[0] = cpuid_edx(0x00000001);
+ wrmsr(0x80860004, cap_mask, uk);
+
+ /* If we can run i686 user-space code, call us an i686 */
+#define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
+ if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
+ c->x86 = 6;
+}
+
+static void transmeta_identify(struct cpuinfo_x86 * c)
+{
+ u32 xlvl;
+ generic_identify(c);
+
+ /* Transmeta-defined flags: level 0x80860001 */
+ xlvl = cpuid_eax(0x80860000);
+ if ( (xlvl & 0xffff0000) == 0x80860000 ) {
+ if ( xlvl >= 0x80860001 )
+ c->x86_capability[2] = cpuid_edx(0x80860001);
+ }
+}
+
+static struct cpu_dev transmeta_cpu_dev __initdata = {
+ .c_vendor = "Transmeta",
+ .c_ident = { "GenuineTMx86", "TransmetaCPU" },
+ .c_init = init_transmeta,
+ .c_identify = transmeta_identify,
+};
+
+int __init transmeta_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(transmeta_init_cpu);
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c
new file mode 100644
index 0000000..264fcad
--- /dev/null
+++ b/arch/i386/kernel/cpu/umc.c
@@ -0,0 +1,33 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include "cpu.h"
+
+/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+ */
+static void __init init_umc(struct cpuinfo_x86 * c)
+{
+
+}
+
+static struct cpu_dev umc_cpu_dev __initdata = {
+ .c_vendor = "UMC",
+ .c_ident = { "UMC UMC UMC" },
+ .c_models = {
+ { .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
+ {
+ [1] = "U5D",
+ [2] = "U5S",
+ }
+ },
+ },
+ .c_init = init_umc,
+};
+
+int __init umc_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(umc_init_cpu);
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
new file mode 100644
index 0000000..2e27563
--- /dev/null
+++ b/arch/i386/kernel/cpuid.c
@@ -0,0 +1,246 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2000 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * cpuid.c
+ *
+ * x86 CPUID access device
+ *
+ * This device is accessed by lseek() to the appropriate CPUID level
+ * and then read in chunks of 16 bytes. A larger size means multiple
+ * reads of consecutive levels.
+ *
+ * This driver uses /dev/cpu/%d/cpuid where %d is the minor number, and on
+ * an SMP box will direct the access to CPU %d.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/smp.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/smp_lock.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static struct class_simple *cpuid_class;
+
+#ifdef CONFIG_SMP
+
+struct cpuid_command {
+ int cpu;
+ u32 reg;
+ u32 *data;
+};
+
+static void cpuid_smp_cpuid(void *cmd_block)
+{
+ struct cpuid_command *cmd = (struct cpuid_command *)cmd_block;
+
+ if (cmd->cpu == smp_processor_id())
+ cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2],
+ &cmd->data[3]);
+}
+
+static inline void do_cpuid(int cpu, u32 reg, u32 * data)
+{
+ struct cpuid_command cmd;
+
+ preempt_disable();
+ if (cpu == smp_processor_id()) {
+ cpuid(reg, &data[0], &data[1], &data[2], &data[3]);
+ } else {
+ cmd.cpu = cpu;
+ cmd.reg = reg;
+ cmd.data = data;
+
+ smp_call_function(cpuid_smp_cpuid, &cmd, 1, 1);
+ }
+ preempt_enable();
+}
+#else /* ! CONFIG_SMP */
+
+static inline void do_cpuid(int cpu, u32 reg, u32 * data)
+{
+ cpuid(reg, &data[0], &data[1], &data[2], &data[3]);
+}
+
+#endif /* ! CONFIG_SMP */
+
+static loff_t cpuid_seek(struct file *file, loff_t offset, int orig)
+{
+ loff_t ret;
+
+ lock_kernel();
+
+ switch (orig) {
+ case 0:
+ file->f_pos = offset;
+ ret = file->f_pos;
+ break;
+ case 1:
+ file->f_pos += offset;
+ ret = file->f_pos;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ unlock_kernel();
+ return ret;
+}
+
+static ssize_t cpuid_read(struct file *file, char __user *buf,
+ size_t count, loff_t * ppos)
+{
+ char __user *tmp = buf;
+ u32 data[4];
+ size_t rv;
+ u32 reg = *ppos;
+ int cpu = iminor(file->f_dentry->d_inode);
+
+ if (count % 16)
+ return -EINVAL; /* Invalid chunk size */
+
+ for (rv = 0; count; count -= 16) {
+ do_cpuid(cpu, reg, data);
+ if (copy_to_user(tmp, &data, 16))
+ return -EFAULT;
+ tmp += 16;
+ *ppos = reg++;
+ }
+
+ return tmp - buf;
+}
+
+static int cpuid_open(struct inode *inode, struct file *file)
+{
+ unsigned int cpu = iminor(file->f_dentry->d_inode);
+ struct cpuinfo_x86 *c = &(cpu_data)[cpu];
+
+ if (cpu >= NR_CPUS || !cpu_online(cpu))
+ return -ENXIO; /* No such CPU */
+ if (c->cpuid_level < 0)
+ return -EIO; /* CPUID not supported */
+
+ return 0;
+}
+
+/*
+ * File operations we support
+ */
+static struct file_operations cpuid_fops = {
+ .owner = THIS_MODULE,
+ .llseek = cpuid_seek,
+ .read = cpuid_read,
+ .open = cpuid_open,
+};
+
+static int cpuid_class_simple_device_add(int i)
+{
+ int err = 0;
+ struct class_device *class_err;
+
+ class_err = class_simple_device_add(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+ if (IS_ERR(class_err))
+ err = PTR_ERR(class_err);
+ return err;
+}
+
+static int __devinit cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ cpuid_class_simple_device_add(cpu);
+ break;
+ case CPU_DEAD:
+ class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu));
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpuid_class_cpu_notifier =
+{
+ .notifier_call = cpuid_class_cpu_callback,
+};
+
+static int __init cpuid_init(void)
+{
+ int i, err = 0;
+ i = 0;
+
+ if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) {
+ printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n",
+ CPUID_MAJOR);
+ err = -EBUSY;
+ goto out;
+ }
+ cpuid_class = class_simple_create(THIS_MODULE, "cpuid");
+ if (IS_ERR(cpuid_class)) {
+ err = PTR_ERR(cpuid_class);
+ goto out_chrdev;
+ }
+ for_each_online_cpu(i) {
+ err = cpuid_class_simple_device_add(i);
+ if (err != 0)
+ goto out_class;
+ }
+ register_cpu_notifier(&cpuid_class_cpu_notifier);
+
+ err = 0;
+ goto out;
+
+out_class:
+ i = 0;
+ for_each_online_cpu(i) {
+ class_simple_device_remove(MKDEV(CPUID_MAJOR, i));
+ }
+ class_simple_destroy(cpuid_class);
+out_chrdev:
+ unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+out:
+ return err;
+}
+
+static void __exit cpuid_exit(void)
+{
+ int cpu = 0;
+
+ for_each_online_cpu(cpu)
+ class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu));
+ class_simple_destroy(cpuid_class);
+ unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+ unregister_cpu_notifier(&cpuid_class_cpu_notifier);
+}
+
+module_init(cpuid_init);
+module_exit(cpuid_exit);
+
+MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>");
+MODULE_DESCRIPTION("x86 generic CPUID driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c
new file mode 100644
index 0000000..6ed7e28
--- /dev/null
+++ b/arch/i386/kernel/dmi_scan.c
@@ -0,0 +1,487 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <linux/pm.h>
+#include <asm/system.h>
+#include <linux/dmi.h>
+#include <linux/bootmem.h>
+
+
+struct dmi_header
+{
+ u8 type;
+ u8 length;
+ u16 handle;
+};
+
+#undef DMI_DEBUG
+
+#ifdef DMI_DEBUG
+#define dmi_printk(x) printk x
+#else
+#define dmi_printk(x)
+#endif
+
+static char * __init dmi_string(struct dmi_header *dm, u8 s)
+{
+ u8 *bp=(u8 *)dm;
+ bp+=dm->length;
+ if(!s)
+ return "";
+ s--;
+ while(s>0 && *bp)
+ {
+ bp+=strlen(bp);
+ bp++;
+ s--;
+ }
+ return bp;
+}
+
+/*
+ * We have to be cautious here. We have seen BIOSes with DMI pointers
+ * pointing to completely the wrong place for example
+ */
+
+static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dmi_header *))
+{
+ u8 *buf;
+ struct dmi_header *dm;
+ u8 *data;
+ int i=0;
+
+ buf = bt_ioremap(base, len);
+ if(buf==NULL)
+ return -1;
+
+ data = buf;
+
+ /*
+ * Stop when we see all the items the table claimed to have
+ * OR we run off the end of the table (also happens)
+ */
+
+ while(i<num && data-buf+sizeof(struct dmi_header)<=len)
+ {
+ dm=(struct dmi_header *)data;
+ /*
+ * We want to know the total length (formated area and strings)
+ * before decoding to make sure we won't run off the table in
+ * dmi_decode or dmi_string
+ */
+ data+=dm->length;
+ while(data-buf<len-1 && (data[0] || data[1]))
+ data++;
+ if(data-buf<len-1)
+ decode(dm);
+ data+=2;
+ i++;
+ }
+ bt_iounmap(buf, len);
+ return 0;
+}
+
+
+inline static int __init dmi_checksum(u8 *buf)
+{
+ u8 sum=0;
+ int a;
+
+ for(a=0; a<15; a++)
+ sum+=buf[a];
+ return (sum==0);
+}
+
+static int __init dmi_iterate(void (*decode)(struct dmi_header *))
+{
+ u8 buf[15];
+ char __iomem *p, *q;
+
+ /*
+ * no iounmap() for that ioremap(); it would be a no-op, but it's
+ * so early in setup that sucker gets confused into doing what
+ * it shouldn't if we actually call it.
+ */
+ p = ioremap(0xF0000, 0x10000);
+ if (p == NULL)
+ return -1;
+ for (q = p; q < p + 0x10000; q += 16) {
+ memcpy_fromio(buf, q, 15);
+ if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf))
+ {
+ u16 num=buf[13]<<8|buf[12];
+ u16 len=buf[7]<<8|buf[6];
+ u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8];
+
+ /*
+ * DMI version 0.0 means that the real version is taken from
+ * the SMBIOS version, which we don't know at this point.
+ */
+ if(buf[14]!=0)
+ printk(KERN_INFO "DMI %d.%d present.\n",
+ buf[14]>>4, buf[14]&0x0F);
+ else
+ printk(KERN_INFO "DMI present.\n");
+ dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n",
+ num, len));
+ dmi_printk((KERN_INFO "DMI table at 0x%08X.\n",
+ base));
+ if(dmi_table(base,len, num, decode)==0)
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static char *dmi_ident[DMI_STRING_MAX];
+
+/*
+ * Save a DMI string
+ */
+
+static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
+{
+ char *d = (char*)dm;
+ char *p = dmi_string(dm, d[string]);
+ if(p==NULL || *p == 0)
+ return;
+ if (dmi_ident[slot])
+ return;
+ dmi_ident[slot] = alloc_bootmem(strlen(p)+1);
+ if(dmi_ident[slot])
+ strcpy(dmi_ident[slot], p);
+ else
+ printk(KERN_ERR "dmi_save_ident: out of memory.\n");
+}
+
+/*
+ * Ugly compatibility crap.
+ */
+#define dmi_blacklist dmi_system_id
+#define NO_MATCH { DMI_NONE, NULL}
+#define MATCH DMI_MATCH
+
+/*
+ * Toshiba keyboard likes to repeat keys when they are not repeated.
+ */
+
+static __init int broken_toshiba_keyboard(struct dmi_blacklist *d)
+{
+ printk(KERN_WARNING "Toshiba with broken keyboard detected. If your keyboard sometimes generates 3 keypresses instead of one, see http://davyd.ucc.asn.au/projects/toshiba/README\n");
+ return 0;
+}
+
+
+#ifdef CONFIG_ACPI_SLEEP
+static __init int reset_videomode_after_s3(struct dmi_blacklist *d)
+{
+ /* See acpi_wakeup.S */
+ extern long acpi_video_flags;
+ acpi_video_flags |= 2;
+ return 0;
+}
+#endif
+
+
+#ifdef CONFIG_ACPI_BOOT
+extern int acpi_force;
+
+static __init __attribute__((unused)) int dmi_disable_acpi(struct dmi_blacklist *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: acpi off\n",d->ident);
+ disable_acpi();
+ } else {
+ printk(KERN_NOTICE
+ "Warning: DMI blacklist says broken, but acpi forced\n");
+ }
+ return 0;
+}
+
+/*
+ * Limit ACPI to CPU enumeration for HT
+ */
+static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident);
+ disable_acpi();
+ acpi_ht = 1;
+ } else {
+ printk(KERN_NOTICE
+ "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
+ }
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ACPI_PCI
+static __init int disable_acpi_irq(struct dmi_blacklist *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
+ d->ident);
+ acpi_noirq_set();
+ }
+ return 0;
+}
+static __init int disable_acpi_pci(struct dmi_blacklist *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
+ d->ident);
+ acpi_disable_pci();
+ }
+ return 0;
+}
+#endif
+
+/*
+ * Process the DMI blacklists
+ */
+
+
+/*
+ * This will be expanded over time to force things like the APM
+ * interrupt mask settings according to the laptop
+ */
+
+static __initdata struct dmi_blacklist dmi_blacklist[]={
+
+ { broken_toshiba_keyboard, "Toshiba Satellite 4030cdt", { /* Keyboard generates spurious repeats */
+ MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+ NO_MATCH, NO_MATCH, NO_MATCH
+ } },
+#ifdef CONFIG_ACPI_SLEEP
+ { reset_videomode_after_s3, "Toshiba Satellite 4030cdt", { /* Reset video mode after returning from ACPI S3 sleep */
+ MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+ NO_MATCH, NO_MATCH, NO_MATCH
+ } },
+#endif
+
+#ifdef CONFIG_ACPI_BOOT
+ /*
+ * If your system is blacklisted here, but you find that acpi=force
+ * works for you, please contact acpi-devel@sourceforge.net
+ */
+
+ /*
+ * Boxes that need ACPI disabled
+ */
+
+ { dmi_disable_acpi, "IBM Thinkpad", {
+ MATCH(DMI_BOARD_VENDOR, "IBM"),
+ MATCH(DMI_BOARD_NAME, "2629H1G"),
+ NO_MATCH, NO_MATCH }},
+
+ /*
+ * Boxes that need acpi=ht
+ */
+
+ { force_acpi_ht, "FSC Primergy T850", {
+ MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "DELL GX240", {
+ MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
+ MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "HP VISUALIZE NT Workstation", {
+ MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "Compaq Workstation W8000", {
+ MATCH(DMI_SYS_VENDOR, "Compaq"),
+ MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "ASUS P4B266", {
+ MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ MATCH(DMI_BOARD_NAME, "P4B266"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "ASUS P2B-DS", {
+ MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ MATCH(DMI_BOARD_NAME, "P2B-DS"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "ASUS CUR-DLS", {
+ MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ MATCH(DMI_BOARD_NAME, "CUR-DLS"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "ABIT i440BX-W83977", {
+ MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
+ MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "IBM Bladecenter", {
+ MATCH(DMI_BOARD_VENDOR, "IBM"),
+ MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "IBM eServer xSeries 360", {
+ MATCH(DMI_BOARD_VENDOR, "IBM"),
+ MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "IBM eserver xSeries 330", {
+ MATCH(DMI_BOARD_VENDOR, "IBM"),
+ MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
+ NO_MATCH, NO_MATCH }},
+
+ { force_acpi_ht, "IBM eserver xSeries 440", {
+ MATCH(DMI_BOARD_VENDOR, "IBM"),
+ MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
+ NO_MATCH, NO_MATCH }},
+
+#endif // CONFIG_ACPI_BOOT
+
+#ifdef CONFIG_ACPI_PCI
+ /*
+ * Boxes that need ACPI PCI IRQ routing disabled
+ */
+
+ { disable_acpi_irq, "ASUS A7V", {
+ MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+ MATCH(DMI_BOARD_NAME, "<A7V>"),
+ /* newer BIOS, Revision 1011, does work */
+ MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
+ NO_MATCH }},
+
+ /*
+ * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+ */
+ { disable_acpi_pci, "ASUS PR-DLS", { /* _BBN 0 bug */
+ MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ MATCH(DMI_BOARD_NAME, "PR-DLS"),
+ MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
+ MATCH(DMI_BIOS_DATE, "03/21/2003") }},
+
+ { disable_acpi_pci, "Acer TravelMate 36x Laptop", {
+ MATCH(DMI_SYS_VENDOR, "Acer"),
+ MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+ NO_MATCH, NO_MATCH
+ } },
+
+#endif
+
+ { NULL, }
+};
+
+/*
+ * Process a DMI table entry. Right now all we care about are the BIOS
+ * and machine entries. For 2.5 we should pull the smbus controller info
+ * out of here.
+ */
+
+static void __init dmi_decode(struct dmi_header *dm)
+{
+#ifdef DMI_DEBUG
+ u8 *data = (u8 *)dm;
+#endif
+
+ switch(dm->type)
+ {
+ case 0:
+ dmi_printk(("BIOS Vendor: %s\n",
+ dmi_string(dm, data[4])));
+ dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+ dmi_printk(("BIOS Version: %s\n",
+ dmi_string(dm, data[5])));
+ dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+ dmi_printk(("BIOS Release: %s\n",
+ dmi_string(dm, data[8])));
+ dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+ break;
+ case 1:
+ dmi_printk(("System Vendor: %s\n",
+ dmi_string(dm, data[4])));
+ dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+ dmi_printk(("Product Name: %s\n",
+ dmi_string(dm, data[5])));
+ dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+ dmi_printk(("Version: %s\n",
+ dmi_string(dm, data[6])));
+ dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+ dmi_printk(("Serial Number: %s\n",
+ dmi_string(dm, data[7])));
+ break;
+ case 2:
+ dmi_printk(("Board Vendor: %s\n",
+ dmi_string(dm, data[4])));
+ dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+ dmi_printk(("Board Name: %s\n",
+ dmi_string(dm, data[5])));
+ dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+ dmi_printk(("Board Version: %s\n",
+ dmi_string(dm, data[6])));
+ dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+ break;
+ }
+}
+
+void __init dmi_scan_machine(void)
+{
+ int err = dmi_iterate(dmi_decode);
+ if(err == 0)
+ dmi_check_system(dmi_blacklist);
+ else
+ printk(KERN_INFO "DMI not present.\n");
+}
+
+
+/**
+ * dmi_check_system - check system DMI data
+ * @list: array of dmi_system_id structures to match against
+ *
+ * Walk the blacklist table running matching functions until someone
+ * returns non zero or we hit the end. Callback function is called for
+ * each successfull match. Returns the number of matches.
+ */
+int dmi_check_system(struct dmi_system_id *list)
+{
+ int i, count = 0;
+ struct dmi_system_id *d = list;
+
+ while (d->ident) {
+ for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
+ int s = d->matches[i].slot;
+ if (s == DMI_NONE)
+ continue;
+ if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
+ continue;
+ /* No match */
+ goto fail;
+ }
+ if (d->callback && d->callback(d))
+ break;
+ count++;
+fail: d++;
+ }
+
+ return count;
+}
+
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ * dmi_get_system_info - return DMI data value
+ * @field: data index (see enum dmi_filed)
+ *
+ * Returns one DMI data value, can be used to perform
+ * complex DMI data checks.
+ */
+char * dmi_get_system_info(int field)
+{
+ return dmi_ident[field];
+}
+
diff --git a/arch/i386/kernel/doublefault.c b/arch/i386/kernel/doublefault.c
new file mode 100644
index 0000000..789af3e
--- /dev/null
+++ b/arch/i386/kernel/doublefault.c
@@ -0,0 +1,65 @@
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+
+#define DOUBLEFAULT_STACKSIZE (1024)
+static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE];
+#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE)
+
+#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + 0x1000000)
+
+static void doublefault_fn(void)
+{
+ struct Xgt_desc_struct gdt_desc = {0, 0};
+ unsigned long gdt, tss;
+
+ __asm__ __volatile__("sgdt %0": "=m" (gdt_desc): :"memory");
+ gdt = gdt_desc.address;
+
+ printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size);
+
+ if (ptr_ok(gdt)) {
+ gdt += GDT_ENTRY_TSS << 3;
+ tss = *(u16 *)(gdt+2);
+ tss += *(u8 *)(gdt+4) << 16;
+ tss += *(u8 *)(gdt+7) << 24;
+ printk("double fault, tss at %08lx\n", tss);
+
+ if (ptr_ok(tss)) {
+ struct tss_struct *t = (struct tss_struct *)tss;
+
+ printk("eip = %08lx, esp = %08lx\n", t->eip, t->esp);
+
+ printk("eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n",
+ t->eax, t->ebx, t->ecx, t->edx);
+ printk("esi = %08lx, edi = %08lx\n",
+ t->esi, t->edi);
+ }
+ }
+
+ for (;;) /* nothing */;
+}
+
+struct tss_struct doublefault_tss __cacheline_aligned = {
+ .esp0 = STACK_START,
+ .ss0 = __KERNEL_DS,
+ .ldt = 0,
+ .io_bitmap_base = INVALID_IO_BITMAP_OFFSET,
+
+ .eip = (unsigned long) doublefault_fn,
+ .eflags = X86_EFLAGS_SF | 0x2, /* 0x2 bit is always set */
+ .esp = STACK_START,
+ .es = __USER_DS,
+ .cs = __KERNEL_CS,
+ .ss = __KERNEL_DS,
+ .ds = __USER_DS,
+
+ .__cr3 = __pa(swapper_pg_dir)
+};
diff --git a/arch/i386/kernel/early_printk.c b/arch/i386/kernel/early_printk.c
new file mode 100644
index 0000000..92f812b
--- /dev/null
+++ b/arch/i386/kernel/early_printk.c
@@ -0,0 +1,2 @@
+
+#include "../../x86_64/kernel/early_printk.c"
diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c
new file mode 100644
index 0000000..9e5e0d8
--- /dev/null
+++ b/arch/i386/kernel/efi.c
@@ -0,0 +1,635 @@
+/*
+ * Extensible Firmware Interface
+ *
+ * Based on Extensible Firmware Interface Specification version 1.0
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999-2002 Hewlett-Packard Co.
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * All EFI Runtime Services are not implemented yet as EFI only
+ * supports physical mode addressing on SoftSDV. This is to be fixed
+ * in a future version. --drummond 1999-07-20
+ *
+ * Implemented EFI runtime services and virtual mode calls. --davidm
+ *
+ * Goutham Rao: <goutham.rao@intel.com>
+ * Skip non-WB memory and ignore empty memory ranges.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/spinlock.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/tlbflush.h>
+
+#define EFI_DEBUG 0
+#define PFX "EFI: "
+
+extern efi_status_t asmlinkage efi_call_phys(void *, ...);
+
+struct efi efi;
+EXPORT_SYMBOL(efi);
+static struct efi efi_phys __initdata;
+struct efi_memory_map memmap __initdata;
+
+/*
+ * We require an early boot_ioremap mapping mechanism initially
+ */
+extern void * boot_ioremap(unsigned long, unsigned long);
+
+/*
+ * To make EFI call EFI runtime service in physical addressing mode we need
+ * prelog/epilog before/after the invocation to disable interrupt, to
+ * claim EFI runtime service handler exclusively and to duplicate a memory in
+ * low memory space say 0 - 3G.
+ */
+
+static unsigned long efi_rt_eflags;
+static DEFINE_SPINLOCK(efi_rt_lock);
+static pgd_t efi_bak_pg_dir_pointer[2];
+
+static void efi_call_phys_prelog(void)
+{
+ unsigned long cr4;
+ unsigned long temp;
+
+ spin_lock(&efi_rt_lock);
+ local_irq_save(efi_rt_eflags);
+
+ /*
+ * If I don't have PSE, I should just duplicate two entries in page
+ * directory. If I have PSE, I just need to duplicate one entry in
+ * page directory.
+ */
+ __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+
+ if (cr4 & X86_CR4_PSE) {
+ efi_bak_pg_dir_pointer[0].pgd =
+ swapper_pg_dir[pgd_index(0)].pgd;
+ swapper_pg_dir[0].pgd =
+ swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
+ } else {
+ efi_bak_pg_dir_pointer[0].pgd =
+ swapper_pg_dir[pgd_index(0)].pgd;
+ efi_bak_pg_dir_pointer[1].pgd =
+ swapper_pg_dir[pgd_index(0x400000)].pgd;
+ swapper_pg_dir[pgd_index(0)].pgd =
+ swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
+ temp = PAGE_OFFSET + 0x400000;
+ swapper_pg_dir[pgd_index(0x400000)].pgd =
+ swapper_pg_dir[pgd_index(temp)].pgd;
+ }
+
+ /*
+ * After the lock is released, the original page table is restored.
+ */
+ local_flush_tlb();
+
+ cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
+ __asm__ __volatile__("lgdt %0":"=m"
+ (*(struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])));
+}
+
+static void efi_call_phys_epilog(void)
+{
+ unsigned long cr4;
+
+ cpu_gdt_descr[0].address =
+ (unsigned long) __va(cpu_gdt_descr[0].address);
+ __asm__ __volatile__("lgdt %0":"=m"(cpu_gdt_descr));
+ __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+
+ if (cr4 & X86_CR4_PSE) {
+ swapper_pg_dir[pgd_index(0)].pgd =
+ efi_bak_pg_dir_pointer[0].pgd;
+ } else {
+ swapper_pg_dir[pgd_index(0)].pgd =
+ efi_bak_pg_dir_pointer[0].pgd;
+ swapper_pg_dir[pgd_index(0x400000)].pgd =
+ efi_bak_pg_dir_pointer[1].pgd;
+ }
+
+ /*
+ * After the lock is released, the original page table is restored.
+ */
+ local_flush_tlb();
+
+ local_irq_restore(efi_rt_eflags);
+ spin_unlock(&efi_rt_lock);
+}
+
+static efi_status_t
+phys_efi_set_virtual_address_map(unsigned long memory_map_size,
+ unsigned long descriptor_size,
+ u32 descriptor_version,
+ efi_memory_desc_t *virtual_map)
+{
+ efi_status_t status;
+
+ efi_call_phys_prelog();
+ status = efi_call_phys(efi_phys.set_virtual_address_map,
+ memory_map_size, descriptor_size,
+ descriptor_version, virtual_map);
+ efi_call_phys_epilog();
+ return status;
+}
+
+static efi_status_t
+phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
+{
+ efi_status_t status;
+
+ efi_call_phys_prelog();
+ status = efi_call_phys(efi_phys.get_time, tm, tc);
+ efi_call_phys_epilog();
+ return status;
+}
+
+inline int efi_set_rtc_mmss(unsigned long nowtime)
+{
+ int real_seconds, real_minutes;
+ efi_status_t status;
+ efi_time_t eft;
+ efi_time_cap_t cap;
+
+ spin_lock(&efi_rt_lock);
+ status = efi.get_time(&eft, &cap);
+ spin_unlock(&efi_rt_lock);
+ if (status != EFI_SUCCESS)
+ panic("Ooops, efitime: can't read time!\n");
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+
+ if (((abs(real_minutes - eft.minute) + 15)/30) & 1)
+ real_minutes += 30;
+ real_minutes %= 60;
+
+ eft.minute = real_minutes;
+ eft.second = real_seconds;
+
+ if (status != EFI_SUCCESS) {
+ printk("Ooops: efitime: can't read time!\n");
+ return -1;
+ }
+ return 0;
+}
+/*
+ * This should only be used during kernel init and before runtime
+ * services have been remapped, therefore, we'll need to call in physical
+ * mode. Note, this call isn't used later, so mark it __init.
+ */
+inline unsigned long __init efi_get_time(void)
+{
+ efi_status_t status;
+ efi_time_t eft;
+ efi_time_cap_t cap;
+
+ status = phys_efi_get_time(&eft, &cap);
+ if (status != EFI_SUCCESS)
+ printk("Oops: efitime: can't read time status: 0x%lx\n",status);
+
+ return mktime(eft.year, eft.month, eft.day, eft.hour,
+ eft.minute, eft.second);
+}
+
+int is_available_memory(efi_memory_desc_t * md)
+{
+ if (!(md->attribute & EFI_MEMORY_WB))
+ return 0;
+
+ switch (md->type) {
+ case EFI_LOADER_CODE:
+ case EFI_LOADER_DATA:
+ case EFI_BOOT_SERVICES_CODE:
+ case EFI_BOOT_SERVICES_DATA:
+ case EFI_CONVENTIONAL_MEMORY:
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * We need to map the EFI memory map again after paging_init().
+ */
+void __init efi_map_memmap(void)
+{
+ memmap.map = NULL;
+
+ memmap.map = (efi_memory_desc_t *)
+ bt_ioremap((unsigned long) memmap.phys_map,
+ (memmap.nr_map * sizeof(efi_memory_desc_t)));
+
+ if (memmap.map == NULL)
+ printk(KERN_ERR PFX "Could not remap the EFI memmap!\n");
+}
+
+#if EFI_DEBUG
+static void __init print_efi_memmap(void)
+{
+ efi_memory_desc_t *md;
+ int i;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+ printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, "
+ "range=[0x%016llx-0x%016llx) (%lluMB)\n",
+ i, md->type, md->attribute, md->phys_addr,
+ md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
+ (md->num_pages >> (20 - EFI_PAGE_SHIFT)));
+ }
+}
+#endif /* EFI_DEBUG */
+
+/*
+ * Walks the EFI memory map and calls CALLBACK once for each EFI
+ * memory descriptor that has memory that is available for kernel use.
+ */
+void efi_memmap_walk(efi_freemem_callback_t callback, void *arg)
+{
+ int prev_valid = 0;
+ struct range {
+ unsigned long start;
+ unsigned long end;
+ } prev, curr;
+ efi_memory_desc_t *md;
+ unsigned long start, end;
+ int i;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+
+ if ((md->num_pages == 0) || (!is_available_memory(md)))
+ continue;
+
+ curr.start = md->phys_addr;
+ curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
+
+ if (!prev_valid) {
+ prev = curr;
+ prev_valid = 1;
+ } else {
+ if (curr.start < prev.start)
+ printk(KERN_INFO PFX "Unordered memory map\n");
+ if (prev.end == curr.start)
+ prev.end = curr.end;
+ else {
+ start =
+ (unsigned long) (PAGE_ALIGN(prev.start));
+ end = (unsigned long) (prev.end & PAGE_MASK);
+ if ((end > start)
+ && (*callback) (start, end, arg) < 0)
+ return;
+ prev = curr;
+ }
+ }
+ }
+ if (prev_valid) {
+ start = (unsigned long) PAGE_ALIGN(prev.start);
+ end = (unsigned long) (prev.end & PAGE_MASK);
+ if (end > start)
+ (*callback) (start, end, arg);
+ }
+}
+
+void __init efi_init(void)
+{
+ efi_config_table_t *config_tables;
+ efi_runtime_services_t *runtime;
+ efi_char16_t *c16;
+ char vendor[100] = "unknown";
+ unsigned long num_config_tables;
+ int i = 0;
+
+ memset(&efi, 0, sizeof(efi) );
+ memset(&efi_phys, 0, sizeof(efi_phys));
+
+ efi_phys.systab = EFI_SYSTAB;
+ memmap.phys_map = EFI_MEMMAP;
+ memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE;
+ memmap.desc_version = EFI_MEMDESC_VERSION;
+
+ efi.systab = (efi_system_table_t *)
+ boot_ioremap((unsigned long) efi_phys.systab,
+ sizeof(efi_system_table_t));
+ /*
+ * Verify the EFI Table
+ */
+ if (efi.systab == NULL)
+ printk(KERN_ERR PFX "Woah! Couldn't map the EFI system table.\n");
+ if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+ printk(KERN_ERR PFX "Woah! EFI system table signature incorrect\n");
+ if ((efi.systab->hdr.revision ^ EFI_SYSTEM_TABLE_REVISION) >> 16 != 0)
+ printk(KERN_ERR PFX
+ "Warning: EFI system table major version mismatch: "
+ "got %d.%02d, expected %d.%02d\n",
+ efi.systab->hdr.revision >> 16,
+ efi.systab->hdr.revision & 0xffff,
+ EFI_SYSTEM_TABLE_REVISION >> 16,
+ EFI_SYSTEM_TABLE_REVISION & 0xffff);
+ /*
+ * Grab some details from the system table
+ */
+ num_config_tables = efi.systab->nr_tables;
+ config_tables = (efi_config_table_t *)efi.systab->tables;
+ runtime = efi.systab->runtime;
+
+ /*
+ * Show what we know for posterity
+ */
+ c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2);
+ if (c16) {
+ for (i = 0; i < sizeof(vendor) && *c16; ++i)
+ vendor[i] = *c16++;
+ vendor[i] = '\0';
+ } else
+ printk(KERN_ERR PFX "Could not map the firmware vendor!\n");
+
+ printk(KERN_INFO PFX "EFI v%u.%.02u by %s \n",
+ efi.systab->hdr.revision >> 16,
+ efi.systab->hdr.revision & 0xffff, vendor);
+
+ /*
+ * Let's see what config tables the firmware passed to us.
+ */
+ config_tables = (efi_config_table_t *)
+ boot_ioremap((unsigned long) config_tables,
+ num_config_tables * sizeof(efi_config_table_t));
+
+ if (config_tables == NULL)
+ printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n");
+
+ for (i = 0; i < num_config_tables; i++) {
+ if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
+ efi.mps = (void *)config_tables[i].table;
+ printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table);
+ } else
+ if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) {
+ efi.acpi20 = __va(config_tables[i].table);
+ printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table);
+ } else
+ if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) {
+ efi.acpi = __va(config_tables[i].table);
+ printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table);
+ } else
+ if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
+ efi.smbios = (void *) config_tables[i].table;
+ printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table);
+ } else
+ if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
+ efi.hcdp = (void *)config_tables[i].table;
+ printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table);
+ } else
+ if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) {
+ efi.uga = (void *)config_tables[i].table;
+ printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table);
+ }
+ }
+ printk("\n");
+
+ /*
+ * Check out the runtime services table. We need to map
+ * the runtime services table so that we can grab the physical
+ * address of several of the EFI runtime functions, needed to
+ * set the firmware into virtual mode.
+ */
+
+ runtime = (efi_runtime_services_t *) boot_ioremap((unsigned long)
+ runtime,
+ sizeof(efi_runtime_services_t));
+ if (runtime != NULL) {
+ /*
+ * We will only need *early* access to the following
+ * two EFI runtime services before set_virtual_address_map
+ * is invoked.
+ */
+ efi_phys.get_time = (efi_get_time_t *) runtime->get_time;
+ efi_phys.set_virtual_address_map =
+ (efi_set_virtual_address_map_t *)
+ runtime->set_virtual_address_map;
+ } else
+ printk(KERN_ERR PFX "Could not map the runtime service table!\n");
+
+ /* Map the EFI memory map for use until paging_init() */
+
+ memmap.map = (efi_memory_desc_t *)
+ boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE);
+
+ if (memmap.map == NULL)
+ printk(KERN_ERR PFX "Could not map the EFI memory map!\n");
+
+ if (EFI_MEMDESC_SIZE != sizeof(efi_memory_desc_t)) {
+ printk(KERN_WARNING PFX "Warning! Kernel-defined memdesc doesn't "
+ "match the one from EFI!\n");
+ }
+#if EFI_DEBUG
+ print_efi_memmap();
+#endif
+}
+
+/*
+ * This function will switch the EFI runtime services to virtual mode.
+ * Essentially, look through the EFI memmap and map every region that
+ * has the runtime attribute bit set in its memory descriptor and update
+ * that memory descriptor with the virtual address obtained from ioremap().
+ * This enables the runtime services to be called without having to
+ * thunk back into physical mode for every invocation.
+ */
+
+void __init efi_enter_virtual_mode(void)
+{
+ efi_memory_desc_t *md;
+ efi_status_t status;
+ int i;
+
+ efi.systab = NULL;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+
+ if (md->attribute & EFI_MEMORY_RUNTIME) {
+ md->virt_addr =
+ (unsigned long)ioremap(md->phys_addr,
+ md->num_pages << EFI_PAGE_SHIFT);
+ if (!(unsigned long)md->virt_addr) {
+ printk(KERN_ERR PFX "ioremap of 0x%lX failed\n",
+ (unsigned long)md->phys_addr);
+ }
+
+ if (((unsigned long)md->phys_addr <=
+ (unsigned long)efi_phys.systab) &&
+ ((unsigned long)efi_phys.systab <
+ md->phys_addr +
+ ((unsigned long)md->num_pages <<
+ EFI_PAGE_SHIFT))) {
+ unsigned long addr;
+
+ addr = md->virt_addr - md->phys_addr +
+ (unsigned long)efi_phys.systab;
+ efi.systab = (efi_system_table_t *)addr;
+ }
+ }
+ }
+
+ if (!efi.systab)
+ BUG();
+
+ status = phys_efi_set_virtual_address_map(
+ sizeof(efi_memory_desc_t) * memmap.nr_map,
+ sizeof(efi_memory_desc_t),
+ memmap.desc_version,
+ memmap.phys_map);
+
+ if (status != EFI_SUCCESS) {
+ printk (KERN_ALERT "You are screwed! "
+ "Unable to switch EFI into virtual mode "
+ "(status=%lx)\n", status);
+ panic("EFI call to SetVirtualAddressMap() failed!");
+ }
+
+ /*
+ * Now that EFI is in virtual mode, update the function
+ * pointers in the runtime service table to the new virtual addresses.
+ */
+
+ efi.get_time = (efi_get_time_t *) efi.systab->runtime->get_time;
+ efi.set_time = (efi_set_time_t *) efi.systab->runtime->set_time;
+ efi.get_wakeup_time = (efi_get_wakeup_time_t *)
+ efi.systab->runtime->get_wakeup_time;
+ efi.set_wakeup_time = (efi_set_wakeup_time_t *)
+ efi.systab->runtime->set_wakeup_time;
+ efi.get_variable = (efi_get_variable_t *)
+ efi.systab->runtime->get_variable;
+ efi.get_next_variable = (efi_get_next_variable_t *)
+ efi.systab->runtime->get_next_variable;
+ efi.set_variable = (efi_set_variable_t *)
+ efi.systab->runtime->set_variable;
+ efi.get_next_high_mono_count = (efi_get_next_high_mono_count_t *)
+ efi.systab->runtime->get_next_high_mono_count;
+ efi.reset_system = (efi_reset_system_t *)
+ efi.systab->runtime->reset_system;
+}
+
+void __init
+efi_initialize_iomem_resources(struct resource *code_resource,
+ struct resource *data_resource)
+{
+ struct resource *res;
+ efi_memory_desc_t *md;
+ int i;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+
+ if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) >
+ 0x100000000ULL)
+ continue;
+ res = alloc_bootmem_low(sizeof(struct resource));
+ switch (md->type) {
+ case EFI_RESERVED_TYPE:
+ res->name = "Reserved Memory";
+ break;
+ case EFI_LOADER_CODE:
+ res->name = "Loader Code";
+ break;
+ case EFI_LOADER_DATA:
+ res->name = "Loader Data";
+ break;
+ case EFI_BOOT_SERVICES_DATA:
+ res->name = "BootServices Data";
+ break;
+ case EFI_BOOT_SERVICES_CODE:
+ res->name = "BootServices Code";
+ break;
+ case EFI_RUNTIME_SERVICES_CODE:
+ res->name = "Runtime Service Code";
+ break;
+ case EFI_RUNTIME_SERVICES_DATA:
+ res->name = "Runtime Service Data";
+ break;
+ case EFI_CONVENTIONAL_MEMORY:
+ res->name = "Conventional Memory";
+ break;
+ case EFI_UNUSABLE_MEMORY:
+ res->name = "Unusable Memory";
+ break;
+ case EFI_ACPI_RECLAIM_MEMORY:
+ res->name = "ACPI Reclaim";
+ break;
+ case EFI_ACPI_MEMORY_NVS:
+ res->name = "ACPI NVS";
+ break;
+ case EFI_MEMORY_MAPPED_IO:
+ res->name = "Memory Mapped IO";
+ break;
+ case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+ res->name = "Memory Mapped IO Port Space";
+ break;
+ default:
+ res->name = "Reserved";
+ break;
+ }
+ res->start = md->phys_addr;
+ res->end = res->start + ((md->num_pages << EFI_PAGE_SHIFT) - 1);
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, res) < 0)
+ printk(KERN_ERR PFX "Failed to allocate res %s : 0x%lx-0x%lx\n",
+ res->name, res->start, res->end);
+ /*
+ * We don't know which region contains kernel data so we try
+ * it repeatedly and let the resource manager test it.
+ */
+ if (md->type == EFI_CONVENTIONAL_MEMORY) {
+ request_resource(res, code_resource);
+ request_resource(res, data_resource);
+ }
+ }
+}
+
+/*
+ * Convenience functions to obtain memory types and attributes
+ */
+
+u32 efi_mem_type(unsigned long phys_addr)
+{
+ efi_memory_desc_t *md;
+ int i;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+ if ((md->phys_addr <= phys_addr) && (phys_addr <
+ (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
+ return md->type;
+ }
+ return 0;
+}
+
+u64 efi_mem_attributes(unsigned long phys_addr)
+{
+ efi_memory_desc_t *md;
+ int i;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+ if ((md->phys_addr <= phys_addr) && (phys_addr <
+ (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
+ return md->attribute;
+ }
+ return 0;
+}
diff --git a/arch/i386/kernel/efi_stub.S b/arch/i386/kernel/efi_stub.S
new file mode 100644
index 0000000..08c0312
--- /dev/null
+++ b/arch/i386/kernel/efi_stub.S
@@ -0,0 +1,124 @@
+/*
+ * EFI call stub for IA32.
+ *
+ * This stub allows us to make EFI calls in physical mode with interrupts
+ * turned off.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * efi_call_phys(void *, ...) is a function with variable parameters.
+ * All the callers of this function assure that all the parameters are 4-bytes.
+ */
+
+/*
+ * In gcc calling convention, EBX, ESP, EBP, ESI and EDI are all callee save.
+ * So we'd better save all of them at the beginning of this function and restore
+ * at the end no matter how many we use, because we can not assure EFI runtime
+ * service functions will comply with gcc calling convention, too.
+ */
+
+.text
+ENTRY(efi_call_phys)
+ /*
+ * 0. The function can only be called in Linux kernel. So CS has been
+ * set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found
+ * the values of these registers are the same. And, the corresponding
+ * GDT entries are identical. So I will do nothing about segment reg
+ * and GDT, but change GDT base register in prelog and epilog.
+ */
+
+ /*
+ * 1. Now I am running with EIP = <physical address> + PAGE_OFFSET.
+ * But to make it smoothly switch from virtual mode to flat mode.
+ * The mapping of lower virtual memory has been created in prelog and
+ * epilog.
+ */
+ movl $1f, %edx
+ subl $__PAGE_OFFSET, %edx
+ jmp *%edx
+1:
+
+ /*
+ * 2. Now on the top of stack is the return
+ * address in the caller of efi_call_phys(), then parameter 1,
+ * parameter 2, ..., param n. To make things easy, we save the return
+ * address of efi_call_phys in a global variable.
+ */
+ popl %edx
+ movl %edx, saved_return_addr
+ /* get the function pointer into ECX*/
+ popl %ecx
+ movl %ecx, efi_rt_function_ptr
+ movl $2f, %edx
+ subl $__PAGE_OFFSET, %edx
+ pushl %edx
+
+ /*
+ * 3. Clear PG bit in %CR0.
+ */
+ movl %cr0, %edx
+ andl $0x7fffffff, %edx
+ movl %edx, %cr0
+ jmp 1f
+1:
+
+ /*
+ * 4. Adjust stack pointer.
+ */
+ subl $__PAGE_OFFSET, %esp
+
+ /*
+ * 5. Call the physical function.
+ */
+ jmp *%ecx
+
+2:
+ /*
+ * 6. After EFI runtime service returns, control will return to
+ * following instruction. We'd better readjust stack pointer first.
+ */
+ addl $__PAGE_OFFSET, %esp
+
+ /*
+ * 7. Restore PG bit
+ */
+ movl %cr0, %edx
+ orl $0x80000000, %edx
+ movl %edx, %cr0
+ jmp 1f
+1:
+ /*
+ * 8. Now restore the virtual mode from flat mode by
+ * adding EIP with PAGE_OFFSET.
+ */
+ movl $1f, %edx
+ jmp *%edx
+1:
+
+ /*
+ * 9. Balance the stack. And because EAX contain the return value,
+ * we'd better not clobber it.
+ */
+ leal efi_rt_function_ptr, %edx
+ movl (%edx), %ecx
+ pushl %ecx
+
+ /*
+ * 10. Push the saved return address onto the stack and return.
+ */
+ leal saved_return_addr, %edx
+ movl (%edx), %ecx
+ pushl %ecx
+ ret
+.previous
+
+.data
+saved_return_addr:
+ .long 0
+efi_rt_function_ptr:
+ .long 0
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
new file mode 100644
index 0000000..1e45ff2
--- /dev/null
+++ b/arch/i386/kernel/entry.S
@@ -0,0 +1,950 @@
+/*
+ * linux/arch/i386/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * I changed all the .align's to 4 (16 byte alignment), as that's faster
+ * on a 486.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * ptrace needs to have all regs on the stack.
+ * if the order here is changed, it needs to be
+ * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace.c and ptrace.h
+ *
+ * 0(%esp) - %ebx
+ * 4(%esp) - %ecx
+ * 8(%esp) - %edx
+ * C(%esp) - %esi
+ * 10(%esp) - %edi
+ * 14(%esp) - %ebp
+ * 18(%esp) - %eax
+ * 1C(%esp) - %ds
+ * 20(%esp) - %es
+ * 24(%esp) - orig_eax
+ * 28(%esp) - %eip
+ * 2C(%esp) - %cs
+ * 30(%esp) - %eflags
+ * 34(%esp) - %oldesp
+ * 38(%esp) - %oldss
+ *
+ * "current" is in register %ebx during any slow entries.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#include "irq_vectors.h"
+
+#define nr_syscalls ((syscall_table_size)/4)
+
+EBX = 0x00
+ECX = 0x04
+EDX = 0x08
+ESI = 0x0C
+EDI = 0x10
+EBP = 0x14
+EAX = 0x18
+DS = 0x1C
+ES = 0x20
+ORIG_EAX = 0x24
+EIP = 0x28
+CS = 0x2C
+EFLAGS = 0x30
+OLDESP = 0x34
+OLDSS = 0x38
+
+CF_MASK = 0x00000001
+TF_MASK = 0x00000100
+IF_MASK = 0x00000200
+DF_MASK = 0x00000400
+NT_MASK = 0x00004000
+VM_MASK = 0x00020000
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop cli
+#else
+#define preempt_stop
+#define resume_kernel restore_nocheck
+#endif
+
+#define SAVE_ALL \
+ cld; \
+ pushl %es; \
+ pushl %ds; \
+ pushl %eax; \
+ pushl %ebp; \
+ pushl %edi; \
+ pushl %esi; \
+ pushl %edx; \
+ pushl %ecx; \
+ pushl %ebx; \
+ movl $(__USER_DS), %edx; \
+ movl %edx, %ds; \
+ movl %edx, %es;
+
+#define RESTORE_INT_REGS \
+ popl %ebx; \
+ popl %ecx; \
+ popl %edx; \
+ popl %esi; \
+ popl %edi; \
+ popl %ebp; \
+ popl %eax
+
+#define RESTORE_REGS \
+ RESTORE_INT_REGS; \
+1: popl %ds; \
+2: popl %es; \
+.section .fixup,"ax"; \
+3: movl $0,(%esp); \
+ jmp 1b; \
+4: movl $0,(%esp); \
+ jmp 2b; \
+.previous; \
+.section __ex_table,"a";\
+ .align 4; \
+ .long 1b,3b; \
+ .long 2b,4b; \
+.previous
+
+
+ENTRY(ret_from_fork)
+ pushl %eax
+ call schedule_tail
+ GET_THREAD_INFO(%ebp)
+ popl %eax
+ jmp syscall_exit
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+ # userspace resumption stub bypassing syscall exit tracing
+ ALIGN
+ret_from_exception:
+ preempt_stop
+ret_from_intr:
+ GET_THREAD_INFO(%ebp)
+ movl EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb CS(%esp), %al
+ testl $(VM_MASK | 3), %eax
+ jz resume_kernel
+ENTRY(resume_userspace)
+ cli # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
+ # int/exception return?
+ jne work_pending
+ jmp restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ cli
+ cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
+ jnz restore_nocheck
+need_resched:
+ movl TI_flags(%ebp), %ecx # need_resched set ?
+ testb $_TIF_NEED_RESCHED, %cl
+ jz restore_all
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
+ jz restore_all
+ call preempt_schedule_irq
+ jmp need_resched
+#endif
+
+/* SYSENTER_RETURN points to after the "sysenter" instruction in
+ the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
+
+ # sysenter call handler stub
+ENTRY(sysenter_entry)
+ movl TSS_sysenter_esp0(%esp),%esp
+sysenter_past_esp:
+ sti
+ pushl $(__USER_DS)
+ pushl %ebp
+ pushfl
+ pushl $(__USER_CS)
+ pushl $SYSENTER_RETURN
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+ cmpl $__PAGE_OFFSET-3,%ebp
+ jae syscall_fault
+1: movl (%ebp),%ebp
+.section __ex_table,"a"
+ .align 4
+ .long 1b,syscall_fault
+.previous
+
+ pushl %eax
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+
+ /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(nr_syscalls), %eax
+ jae syscall_badsys
+ call *sys_call_table(,%eax,4)
+ movl %eax,EAX(%esp)
+ cli
+ movl TI_flags(%ebp), %ecx
+ testw $_TIF_ALLWORK_MASK, %cx
+ jne syscall_exit_work
+/* if something modifies registers it must also disable sysexit */
+ movl EIP(%esp), %edx
+ movl OLDESP(%esp), %ecx
+ xorl %ebp,%ebp
+ sti
+ sysexit
+
+
+ # system call handler stub
+ENTRY(system_call)
+ pushl %eax # save orig_eax
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+ # system call tracing in operation
+ /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(nr_syscalls), %eax
+ jae syscall_badsys
+syscall_call:
+ call *sys_call_table(,%eax,4)
+ movl %eax,EAX(%esp) # store the return value
+syscall_exit:
+ cli # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ movl TI_flags(%ebp), %ecx
+ testw $_TIF_ALLWORK_MASK, %cx # current->work
+ jne syscall_exit_work
+
+restore_all:
+ movl EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ movb OLDSS(%esp), %ah
+ movb CS(%esp), %al
+ andl $(VM_MASK | (4 << 8) | 3), %eax
+ cmpl $((4 << 8) | 3), %eax
+ je ldt_ss # returning to user-space with LDT SS
+restore_nocheck:
+ RESTORE_REGS
+ addl $4, %esp
+1: iret
+.section .fixup,"ax"
+iret_exc:
+ sti
+ movl $__USER_DS, %edx
+ movl %edx, %ds
+ movl %edx, %es
+ movl $11,%eax
+ call do_exit
+.previous
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+ldt_ss:
+ larl OLDSS(%esp), %eax
+ jnz restore_nocheck
+ testl $0x00400000, %eax # returning to 32bit stack?
+ jnz restore_nocheck # allright, normal return
+ /* If returning to userspace with 16bit stack,
+ * try to fix the higher word of ESP, as the CPU
+ * won't restore it.
+ * This is an "official" bug of all the x86-compatible
+ * CPUs, which we can try to work around to make
+ * dosemu and wine happy. */
+ subl $8, %esp # reserve space for switch16 pointer
+ cli
+ movl %esp, %eax
+ /* Set up the 16bit stack frame with switch32 pointer on top,
+ * and a switch16 pointer on top of the current frame. */
+ call setup_x86_bogus_stack
+ RESTORE_REGS
+ lss 20+4(%esp), %esp # switch to 16bit stack
+1: iret
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+ # perform work that needs to be done immediately before resumption
+ ALIGN
+work_pending:
+ testb $_TIF_NEED_RESCHED, %cl
+ jz work_notifysig
+work_resched:
+ call schedule
+ cli # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
+ # than syscall tracing?
+ jz restore_all
+ testb $_TIF_NEED_RESCHED, %cl
+ jnz work_resched
+
+work_notifysig: # deal with pending signals and
+ # notify-resume requests
+ testl $VM_MASK, EFLAGS(%esp)
+ movl %esp, %eax
+ jne work_notifysig_v86 # returning to kernel-space or
+ # vm86-space
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp restore_all
+
+ ALIGN
+work_notifysig_v86:
+ pushl %ecx # save ti_flags for do_notify_resume
+ call save_v86_state # %eax contains pt_regs pointer
+ popl %ecx
+ movl %eax, %esp
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp restore_all
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_trace_entry:
+ movl $-ENOSYS,EAX(%esp)
+ movl %esp, %eax
+ xorl %edx,%edx
+ call do_syscall_trace
+ movl ORIG_EAX(%esp), %eax
+ cmpl $(nr_syscalls), %eax
+ jnae syscall_call
+ jmp syscall_exit
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_exit_work:
+ testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+ jz work_pending
+ sti # could let do_syscall_trace() call
+ # schedule() instead
+ movl %esp, %eax
+ movl $1, %edx
+ call do_syscall_trace
+ jmp resume_userspace
+
+ ALIGN
+syscall_fault:
+ pushl %eax # save orig_eax
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+ movl $-EFAULT,EAX(%esp)
+ jmp resume_userspace
+
+ ALIGN
+syscall_badsys:
+ movl $-ENOSYS,EAX(%esp)
+ jmp resume_userspace
+
+#define FIXUP_ESPFIX_STACK \
+ movl %esp, %eax; \
+ /* switch to 32bit stack using the pointer on top of 16bit stack */ \
+ lss %ss:CPU_16BIT_STACK_SIZE-8, %esp; \
+ /* copy data from 16bit stack to 32bit stack */ \
+ call fixup_x86_bogus_stack; \
+ /* put ESP to the proper location */ \
+ movl %eax, %esp;
+#define UNWIND_ESPFIX_STACK \
+ pushl %eax; \
+ movl %ss, %eax; \
+ /* see if on 16bit stack */ \
+ cmpw $__ESPFIX_SS, %ax; \
+ jne 28f; \
+ movl $__KERNEL_DS, %edx; \
+ movl %edx, %ds; \
+ movl %edx, %es; \
+ /* switch to 32bit stack */ \
+ FIXUP_ESPFIX_STACK \
+28: popl %eax;
+
+/*
+ * Build the entry stubs and pointer table with
+ * some assembler magic.
+ */
+.data
+ENTRY(interrupt)
+.text
+
+vector=0
+ENTRY(irq_entries_start)
+.rept NR_IRQS
+ ALIGN
+1: pushl $vector-256
+ jmp common_interrupt
+.data
+ .long 1b
+.text
+vector=vector+1
+.endr
+
+ ALIGN
+common_interrupt:
+ SAVE_ALL
+ movl %esp,%eax
+ call do_IRQ
+ jmp ret_from_intr
+
+#define BUILD_INTERRUPT(name, nr) \
+ENTRY(name) \
+ pushl $nr-256; \
+ SAVE_ALL \
+ movl %esp,%eax; \
+ call smp_/**/name; \
+ jmp ret_from_intr;
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include "entry_arch.h"
+
+ENTRY(divide_error)
+ pushl $0 # no error code
+ pushl $do_divide_error
+ ALIGN
+error_code:
+ pushl %ds
+ pushl %eax
+ xorl %eax, %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ decl %eax # eax = -1
+ pushl %ecx
+ pushl %ebx
+ cld
+ pushl %es
+ UNWIND_ESPFIX_STACK
+ popl %ecx
+ movl ES(%esp), %edi # get the function address
+ movl ORIG_EAX(%esp), %edx # get the error code
+ movl %eax, ORIG_EAX(%esp)
+ movl %ecx, ES(%esp)
+ movl $(__USER_DS), %ecx
+ movl %ecx, %ds
+ movl %ecx, %es
+ movl %esp,%eax # pt_regs pointer
+ call *%edi
+ jmp ret_from_exception
+
+ENTRY(coprocessor_error)
+ pushl $0
+ pushl $do_coprocessor_error
+ jmp error_code
+
+ENTRY(simd_coprocessor_error)
+ pushl $0
+ pushl $do_simd_coprocessor_error
+ jmp error_code
+
+ENTRY(device_not_available)
+ pushl $-1 # mark this as an int
+ SAVE_ALL
+ movl %cr0, %eax
+ testl $0x4, %eax # EM (math emulation bit)
+ jne device_not_available_emulate
+ preempt_stop
+ call math_state_restore
+ jmp ret_from_exception
+device_not_available_emulate:
+ pushl $0 # temporary storage for ORIG_EIP
+ call math_emulate
+ addl $4, %esp
+ jmp ret_from_exception
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label) \
+ cmpw $__KERNEL_CS,4(%esp); \
+ jne ok; \
+label: \
+ movl TSS_sysenter_esp0+offset(%esp),%esp; \
+ pushfl; \
+ pushl $__KERNEL_CS; \
+ pushl $sysenter_past_esp
+
+ENTRY(debug)
+ cmpl $sysenter_entry,(%esp)
+ jne debug_stack_correct
+ FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+ pushl $-1 # mark this as an int
+ SAVE_ALL
+ xorl %edx,%edx # error code 0
+ movl %esp,%eax # pt_regs pointer
+ call do_debug
+ testl %eax,%eax
+ jnz restore_all
+ jmp ret_from_exception
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+ pushl %eax
+ movl %ss, %eax
+ cmpw $__ESPFIX_SS, %ax
+ popl %eax
+ je nmi_16bit_stack
+ cmpl $sysenter_entry,(%esp)
+ je nmi_stack_fixup
+ pushl %eax
+ movl %esp,%eax
+ /* Do not access memory above the end of our stack page,
+ * it might not exist.
+ */
+ andl $(THREAD_SIZE-1),%eax
+ cmpl $(THREAD_SIZE-20),%eax
+ popl %eax
+ jae nmi_stack_correct
+ cmpl $sysenter_entry,12(%esp)
+ je nmi_debug_stack_check
+nmi_stack_correct:
+ pushl %eax
+ SAVE_ALL
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_nmi
+ jmp restore_all
+
+nmi_stack_fixup:
+ FIX_STACK(12,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+nmi_debug_stack_check:
+ cmpw $__KERNEL_CS,16(%esp)
+ jne nmi_stack_correct
+ cmpl $debug - 1,(%esp)
+ jle nmi_stack_correct
+ cmpl $debug_esp_fix_insn,(%esp)
+ jle nmi_debug_stack_fixup
+nmi_debug_stack_fixup:
+ FIX_STACK(24,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+
+nmi_16bit_stack:
+ /* create the pointer to lss back */
+ pushl %ss
+ pushl %esp
+ movzwl %sp, %esp
+ addw $4, (%esp)
+ /* copy the iret frame of 12 bytes */
+ .rept 3
+ pushl 16(%esp)
+ .endr
+ pushl %eax
+ SAVE_ALL
+ FIXUP_ESPFIX_STACK # %eax == %esp
+ xorl %edx,%edx # zero error code
+ call do_nmi
+ RESTORE_REGS
+ lss 12+4(%esp), %esp # back to 16bit stack
+1: iret
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+ENTRY(int3)
+ pushl $-1 # mark this as an int
+ SAVE_ALL
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_int3
+ testl %eax,%eax
+ jnz restore_all
+ jmp ret_from_exception
+
+ENTRY(overflow)
+ pushl $0
+ pushl $do_overflow
+ jmp error_code
+
+ENTRY(bounds)
+ pushl $0
+ pushl $do_bounds
+ jmp error_code
+
+ENTRY(invalid_op)
+ pushl $0
+ pushl $do_invalid_op
+ jmp error_code
+
+ENTRY(coprocessor_segment_overrun)
+ pushl $0
+ pushl $do_coprocessor_segment_overrun
+ jmp error_code
+
+ENTRY(invalid_TSS)
+ pushl $do_invalid_TSS
+ jmp error_code
+
+ENTRY(segment_not_present)
+ pushl $do_segment_not_present
+ jmp error_code
+
+ENTRY(stack_segment)
+ pushl $do_stack_segment
+ jmp error_code
+
+ENTRY(general_protection)
+ pushl $do_general_protection
+ jmp error_code
+
+ENTRY(alignment_check)
+ pushl $do_alignment_check
+ jmp error_code
+
+ENTRY(page_fault)
+ pushl $do_page_fault
+ jmp error_code
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+ pushl $0
+ pushl machine_check_vector
+ jmp error_code
+#endif
+
+ENTRY(spurious_interrupt_bug)
+ pushl $0
+ pushl $do_spurious_interrupt_bug
+ jmp error_code
+
+.data
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_olduname
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ioperm
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_uname
+ .long sys_iopl /* 110 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_vm86old
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_modify_ldt
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* reserved for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_vm86
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* reserved for streams1 */
+ .long sys_ni_syscall /* reserved for streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_set_thread_area
+ .long sys_get_thread_area
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_mbind
+ .long sys_get_mempolicy
+ .long sys_set_mempolicy
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_ni_syscall /* reserved for kexec */
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+
+syscall_table_size=(.-sys_call_table)
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
new file mode 100644
index 0000000..d273fd7
--- /dev/null
+++ b/arch/i386/kernel/head.S
@@ -0,0 +1,521 @@
+/*
+ * linux/arch/i386/kernel/head.S -- the 32-bit startup code.
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Enhanced CPU detection and feature setting code by Mike Jagdis
+ * and Martin Mares, November 1997.
+ */
+
+.text
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm_offsets.h>
+#include <asm/setup.h>
+
+/*
+ * References to members of the new_cpu_data structure.
+ */
+
+#define X86 new_cpu_data+CPUINFO_x86
+#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
+#define X86_MODEL new_cpu_data+CPUINFO_x86_model
+#define X86_MASK new_cpu_data+CPUINFO_x86_mask
+#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
+#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
+#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
+#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
+
+/*
+ * This is how much memory *in addition to the memory covered up to
+ * and including _end* we need mapped initially. We need one bit for
+ * each possible page, but only in low memory, which means
+ * 2^32/4096/8 = 128K worst case (4G/4G split.)
+ *
+ * Modulo rounding, each megabyte assigned here requires a kilobyte of
+ * memory, which is currently unreclaimed.
+ *
+ * This should be a multiple of a page.
+ */
+#define INIT_MAP_BEYOND_END (128*1024)
+
+
+/*
+ * 32-bit kernel entrypoint; only used by the boot CPU. On entry,
+ * %esi points to the real-mode code as a 32-bit pointer.
+ * CS and DS must be 4 GB flat segments, but we don't depend on
+ * any particular GDT layout, because we load our own as soon as we
+ * can.
+ */
+ENTRY(startup_32)
+
+/*
+ * Set segments to known values.
+ */
+ cld
+ lgdt boot_gdt_descr - __PAGE_OFFSET
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+
+/*
+ * Clear BSS first so that there are no surprises...
+ * No need to cld as DF is already clear from cld above...
+ */
+ xorl %eax,%eax
+ movl $__bss_start - __PAGE_OFFSET,%edi
+ movl $__bss_stop - __PAGE_OFFSET,%ecx
+ subl %edi,%ecx
+ shrl $2,%ecx
+ rep ; stosl
+
+/*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond _end. The variable
+ * init_pg_tables_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
+ *
+ * Warning: don't use %esi or the stack in this code. However, %esp
+ * can be used as a GPR if you really need it...
+ */
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $(pg0 - __PAGE_OFFSET), %edi
+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
+ movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
+10:
+ leal 0x007(%edi),%ecx /* Create PDE entry */
+ movl %ecx,(%edx) /* Store identity PDE entry */
+ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
+ addl $4,%edx
+ movl $1024, %ecx
+11:
+ stosl
+ addl $0x1000,%eax
+ loop 11b
+ /* End condition: we must map up to and including INIT_MAP_BEYOND_END */
+ /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
+ leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
+ cmpl %ebp,%eax
+ jb 10b
+ movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
+
+#ifdef CONFIG_SMP
+ xorl %ebx,%ebx /* This is the boot CPU (BSP) */
+ jmp 3f
+
+/*
+ * Non-boot CPU entry point; entered from trampoline.S
+ * We can't lgdt here, because lgdt itself uses a data segment, but
+ * we know the trampoline has already loaded the boot_gdt_table GDT
+ * for us.
+ */
+ENTRY(startup_32_smp)
+ cld
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+
+/*
+ * New page tables may be in 4Mbyte page mode and may
+ * be using the global pages.
+ *
+ * NOTE! If we are on a 486 we may have no cr4 at all!
+ * So we do not try to touch it unless we really have
+ * some bits in it to set. This won't work if the BSP
+ * implements cr4 but this AP does not -- very unlikely
+ * but be warned! The same applies to the pse feature
+ * if not equally supported. --macro
+ *
+ * NOTE! We have to correct for the fact that we're
+ * not yet offset PAGE_OFFSET..
+ */
+#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
+ movl cr4_bits,%edx
+ andl %edx,%edx
+ jz 6f
+ movl %cr4,%eax # Turn on paging options (PSE,PAE,..)
+ orl %edx,%eax
+ movl %eax,%cr4
+
+ btl $5, %eax # check if PAE is enabled
+ jnc 6f
+
+ /* Check if extended functions are implemented */
+ movl $0x80000000, %eax
+ cpuid
+ cmpl $0x80000000, %eax
+ jbe 6f
+ mov $0x80000001, %eax
+ cpuid
+ /* Execute Disable bit supported? */
+ btl $20, %edx
+ jnc 6f
+
+ /* Setup EFER (Extended Feature Enable Register) */
+ movl $0xc0000080, %ecx
+ rdmsr
+
+ btsl $11, %eax
+ /* Make changes effective */
+ wrmsr
+
+6:
+ /* This is a secondary processor (AP) */
+ xorl %ebx,%ebx
+ incl %ebx
+
+3:
+#endif /* CONFIG_SMP */
+
+/*
+ * Enable paging
+ */
+ movl $swapper_pg_dir-__PAGE_OFFSET,%eax
+ movl %eax,%cr3 /* set the page table pointer.. */
+ movl %cr0,%eax
+ orl $0x80000000,%eax
+ movl %eax,%cr0 /* ..and set paging (PG) bit */
+ ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
+1:
+ /* Set up the stack pointer */
+ lss stack_start,%esp
+
+/*
+ * Initialize eflags. Some BIOS's leave bits like NT set. This would
+ * confuse the debugger if this code is traced.
+ * XXX - best to initialize before switching to protected mode.
+ */
+ pushl $0
+ popfl
+
+#ifdef CONFIG_SMP
+ andl %ebx,%ebx
+ jz 1f /* Initial CPU cleans BSS */
+ jmp checkCPUtype
+1:
+#endif /* CONFIG_SMP */
+
+/*
+ * start system 32-bit setup. We need to re-do some of the things done
+ * in 16-bit mode for the "real" operations.
+ */
+ call setup_idt
+
+/*
+ * Copy bootup parameters out of the way.
+ * Note: %esi still has the pointer to the real-mode data.
+ */
+ movl $boot_params,%edi
+ movl $(PARAM_SIZE/4),%ecx
+ cld
+ rep
+ movsl
+ movl boot_params+NEW_CL_POINTER,%esi
+ andl %esi,%esi
+ jnz 2f # New command line protocol
+ cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
+ jne 1f
+ movzwl OLD_CL_OFFSET,%esi
+ addl $(OLD_CL_BASE_ADDR),%esi
+2:
+ movl $saved_command_line,%edi
+ movl $(COMMAND_LINE_SIZE/4),%ecx
+ rep
+ movsl
+1:
+checkCPUtype:
+
+ movl $-1,X86_CPUID # -1 for no CPUID initially
+
+/* check if it is 486 or 386. */
+/*
+ * XXX - this does a lot of unnecessary setup. Alignment checks don't
+ * apply at our cpl of 0 and the stack ought to be aligned already, and
+ * we don't need to preserve eflags.
+ */
+
+ movb $3,X86 # at least 386
+ pushfl # push EFLAGS
+ popl %eax # get EFLAGS
+ movl %eax,%ecx # save original EFLAGS
+ xorl $0x240000,%eax # flip AC and ID bits in EFLAGS
+ pushl %eax # copy to EFLAGS
+ popfl # set EFLAGS
+ pushfl # get new EFLAGS
+ popl %eax # put it in eax
+ xorl %ecx,%eax # change in flags
+ pushl %ecx # restore original EFLAGS
+ popfl
+ testl $0x40000,%eax # check if AC bit changed
+ je is386
+
+ movb $4,X86 # at least 486
+ testl $0x200000,%eax # check if ID bit changed
+ je is486
+
+ /* get vendor info */
+ xorl %eax,%eax # call CPUID with 0 -> return vendor ID
+ cpuid
+ movl %eax,X86_CPUID # save CPUID level
+ movl %ebx,X86_VENDOR_ID # lo 4 chars
+ movl %edx,X86_VENDOR_ID+4 # next 4 chars
+ movl %ecx,X86_VENDOR_ID+8 # last 4 chars
+
+ orl %eax,%eax # do we have processor info as well?
+ je is486
+
+ movl $1,%eax # Use the CPUID instruction to get CPU type
+ cpuid
+ movb %al,%cl # save reg for future use
+ andb $0x0f,%ah # mask processor family
+ movb %ah,X86
+ andb $0xf0,%al # mask model
+ shrb $4,%al
+ movb %al,X86_MODEL
+ andb $0x0f,%cl # mask mask revision
+ movb %cl,X86_MASK
+ movl %edx,X86_CAPABILITY
+
+is486: movl $0x50022,%ecx # set AM, WP, NE and MP
+ jmp 2f
+
+is386: movl $2,%ecx # set MP
+2: movl %cr0,%eax
+ andl $0x80000011,%eax # Save PG,PE,ET
+ orl %ecx,%eax
+ movl %eax,%cr0
+
+ call check_x87
+ incb ready
+ lgdt cpu_gdt_descr
+ lidt idt_descr
+ ljmp $(__KERNEL_CS),$1f
+1: movl $(__KERNEL_DS),%eax # reload all the segment registers
+ movl %eax,%ss # after changing gdt.
+
+ movl $(__USER_DS),%eax # DS/ES contains default USER segment
+ movl %eax,%ds
+ movl %eax,%es
+
+ xorl %eax,%eax # Clear FS/GS and LDT
+ movl %eax,%fs
+ movl %eax,%gs
+ lldt %ax
+ cld # gcc2 wants the direction flag cleared at all times
+#ifdef CONFIG_SMP
+ movb ready, %cl
+ cmpb $1,%cl
+ je 1f # the first CPU calls start_kernel
+ # all other CPUs call initialize_secondary
+ call initialize_secondary
+ jmp L6
+1:
+#endif /* CONFIG_SMP */
+ call start_kernel
+L6:
+ jmp L6 # main should never return here, but
+ # just in case, we know what happens.
+
+/*
+ * We depend on ET to be correct. This checks for 287/387.
+ */
+check_x87:
+ movb $0,X86_HARD_MATH
+ clts
+ fninit
+ fstsw %ax
+ cmpb $0,%al
+ je 1f
+ movl %cr0,%eax /* no coprocessor: have to set bits */
+ xorl $4,%eax /* set EM */
+ movl %eax,%cr0
+ ret
+ ALIGN
+1: movb $1,X86_HARD_MATH
+ .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
+ ret
+
+/*
+ * setup_idt
+ *
+ * sets up a idt with 256 entries pointing to
+ * ignore_int, interrupt gates. It doesn't actually load
+ * idt - that can be done only after paging has been enabled
+ * and the kernel moved to PAGE_OFFSET. Interrupts
+ * are enabled elsewhere, when we can be relatively
+ * sure everything is ok.
+ *
+ * Warning: %esi is live across this function.
+ */
+setup_idt:
+ lea ignore_int,%edx
+ movl $(__KERNEL_CS << 16),%eax
+ movw %dx,%ax /* selector = 0x0010 = cs */
+ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
+
+ lea idt_table,%edi
+ mov $256,%ecx
+rp_sidt:
+ movl %eax,(%edi)
+ movl %edx,4(%edi)
+ addl $8,%edi
+ dec %ecx
+ jne rp_sidt
+ ret
+
+/* This is the default interrupt "handler" :-) */
+ ALIGN
+ignore_int:
+ cld
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ pushl %es
+ pushl %ds
+ movl $(__KERNEL_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ pushl 16(%esp)
+ pushl 24(%esp)
+ pushl 32(%esp)
+ pushl 40(%esp)
+ pushl $int_msg
+ call printk
+ addl $(5*4),%esp
+ popl %ds
+ popl %es
+ popl %edx
+ popl %ecx
+ popl %eax
+ iret
+
+/*
+ * Real beginning of normal "text" segment
+ */
+ENTRY(stext)
+ENTRY(_stext)
+
+/*
+ * BSS section
+ */
+.section ".bss.page_aligned","w"
+ENTRY(swapper_pg_dir)
+ .fill 1024,4,0
+ENTRY(empty_zero_page)
+ .fill 4096,1,0
+
+/*
+ * This starts the data section.
+ */
+.data
+
+ENTRY(stack_start)
+ .long init_thread_union+THREAD_SIZE
+ .long __BOOT_DS
+
+ready: .byte 0
+
+int_msg:
+ .asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+
+/*
+ * The IDT and GDT 'descriptors' are a strange 48-bit object
+ * only used by the lidt and lgdt instructions. They are not
+ * like usual segment descriptors - they consist of a 16-bit
+ * segment size, and 32-bit linear address value:
+ */
+
+.globl boot_gdt_descr
+.globl idt_descr
+.globl cpu_gdt_descr
+
+ ALIGN
+# early boot GDT descriptor (must use 1:1 address mapping)
+ .word 0 # 32 bit align gdt_desc.address
+boot_gdt_descr:
+ .word __BOOT_DS+7
+ .long boot_gdt_table - __PAGE_OFFSET
+
+ .word 0 # 32-bit align idt_desc.address
+idt_descr:
+ .word IDT_ENTRIES*8-1 # idt contains 256 entries
+ .long idt_table
+
+# boot GDT descriptor (later on used by CPU#0):
+ .word 0 # 32 bit align gdt_desc.address
+cpu_gdt_descr:
+ .word GDT_ENTRIES*8-1
+ .long cpu_gdt_table
+
+ .fill NR_CPUS-1,8,0 # space for the other GDT descriptors
+
+/*
+ * The boot_gdt_table must mirror the equivalent in setup.S and is
+ * used only for booting.
+ */
+ .align L1_CACHE_BYTES
+ENTRY(boot_gdt_table)
+ .fill GDT_ENTRY_BOOT_CS,8,0
+ .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
+ .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
+
+/*
+ * The Global Descriptor Table contains 28 quadwords, per-CPU.
+ */
+ .align PAGE_SIZE_asm
+ENTRY(cpu_gdt_table)
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x0000000000000000 /* 0x0b reserved */
+ .quad 0x0000000000000000 /* 0x13 reserved */
+ .quad 0x0000000000000000 /* 0x1b reserved */
+ .quad 0x0000000000000000 /* 0x20 unused */
+ .quad 0x0000000000000000 /* 0x28 unused */
+ .quad 0x0000000000000000 /* 0x33 TLS entry 1 */
+ .quad 0x0000000000000000 /* 0x3b TLS entry 2 */
+ .quad 0x0000000000000000 /* 0x43 TLS entry 3 */
+ .quad 0x0000000000000000 /* 0x4b reserved */
+ .quad 0x0000000000000000 /* 0x53 reserved */
+ .quad 0x0000000000000000 /* 0x5b reserved */
+
+ .quad 0x00cf9a000000ffff /* 0x60 kernel 4GB code at 0x00000000 */
+ .quad 0x00cf92000000ffff /* 0x68 kernel 4GB data at 0x00000000 */
+ .quad 0x00cffa000000ffff /* 0x73 user 4GB code at 0x00000000 */
+ .quad 0x00cff2000000ffff /* 0x7b user 4GB data at 0x00000000 */
+
+ .quad 0x0000000000000000 /* 0x80 TSS descriptor */
+ .quad 0x0000000000000000 /* 0x88 LDT descriptor */
+
+ /* Segments used for calling PnP BIOS */
+ .quad 0x00c09a0000000000 /* 0x90 32-bit code */
+ .quad 0x00809a0000000000 /* 0x98 16-bit code */
+ .quad 0x0080920000000000 /* 0xa0 16-bit data */
+ .quad 0x0080920000000000 /* 0xa8 16-bit data */
+ .quad 0x0080920000000000 /* 0xb0 16-bit data */
+ /*
+ * The APM segments have byte granularity and their bases
+ * and limits are set at run time.
+ */
+ .quad 0x00409a0000000000 /* 0xb8 APM CS code */
+ .quad 0x00009a0000000000 /* 0xc0 APM CS 16 code (16 bit) */
+ .quad 0x0040920000000000 /* 0xc8 APM DS data */
+
+ .quad 0x0000920000000000 /* 0xd0 - ESPFIX 16-bit SS */
+ .quad 0x0000000000000000 /* 0xd8 - unused */
+ .quad 0x0000000000000000 /* 0xe0 - unused */
+ .quad 0x0000000000000000 /* 0xe8 - unused */
+ .quad 0x0000000000000000 /* 0xf0 - unused */
+ .quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
+
diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c
new file mode 100644
index 0000000..14ec354
--- /dev/null
+++ b/arch/i386/kernel/i386_ksyms.c
@@ -0,0 +1,195 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/mca.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/pm.h>
+#include <linux/pci.h>
+#include <linux/apm_bios.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/highmem.h>
+#include <linux/time.h>
+
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/mmx.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/nmi.h>
+#include <asm/ist.h>
+#include <asm/kdebug.h>
+
+extern void dump_thread(struct pt_regs *, struct user *);
+extern spinlock_t rtc_lock;
+
+/* This is definitely a GPL-only symbol */
+EXPORT_SYMBOL_GPL(cpu_gdt_table);
+
+#if defined(CONFIG_APM_MODULE)
+extern void machine_real_restart(unsigned char *, int);
+EXPORT_SYMBOL(machine_real_restart);
+extern void default_idle(void);
+EXPORT_SYMBOL(default_idle);
+#endif
+
+#ifdef CONFIG_SMP
+extern void FASTCALL( __write_lock_failed(rwlock_t *rw));
+extern void FASTCALL( __read_lock_failed(rwlock_t *rw));
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+extern struct drive_info_struct drive_info;
+EXPORT_SYMBOL(drive_info);
+#endif
+
+extern unsigned long cpu_khz;
+extern unsigned long get_cmos_time(void);
+
+/* platform dependent support */
+EXPORT_SYMBOL(boot_cpu_data);
+#ifdef CONFIG_DISCONTIGMEM
+EXPORT_SYMBOL(node_data);
+EXPORT_SYMBOL(physnode_map);
+#endif
+#ifdef CONFIG_X86_NUMAQ
+EXPORT_SYMBOL(xquad_portio);
+#endif
+EXPORT_SYMBOL(dump_thread);
+EXPORT_SYMBOL(dump_fpu);
+EXPORT_SYMBOL_GPL(kernel_fpu_begin);
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(ioremap_nocache);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(kernel_thread);
+EXPORT_SYMBOL(pm_idle);
+EXPORT_SYMBOL(pm_power_off);
+EXPORT_SYMBOL(get_cmos_time);
+EXPORT_SYMBOL(cpu_khz);
+EXPORT_SYMBOL(apm_info);
+
+EXPORT_SYMBOL(__down_failed);
+EXPORT_SYMBOL(__down_failed_interruptible);
+EXPORT_SYMBOL(__down_failed_trylock);
+EXPORT_SYMBOL(__up_wakeup);
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy_generic);
+/* Delay loops */
+EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__copy_from_user_ll);
+EXPORT_SYMBOL(__copy_to_user_ll);
+EXPORT_SYMBOL(strnlen_user);
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+EXPORT_SYMBOL(dma_free_coherent);
+
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+#ifdef CONFIG_PCI_BIOS
+EXPORT_SYMBOL(pcibios_set_irq_routing);
+EXPORT_SYMBOL(pcibios_get_irq_routing_table);
+#endif
+
+#ifdef CONFIG_X86_USE_3DNOW
+EXPORT_SYMBOL(_mmx_memcpy);
+EXPORT_SYMBOL(mmx_clear_page);
+EXPORT_SYMBOL(mmx_copy_page);
+#endif
+
+#ifdef CONFIG_X86_HT
+EXPORT_SYMBOL(smp_num_siblings);
+EXPORT_SYMBOL(cpu_sibling_map);
+#endif
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(cpu_data);
+EXPORT_SYMBOL(cpu_online_map);
+EXPORT_SYMBOL(cpu_callout_map);
+EXPORT_SYMBOL(__write_lock_failed);
+EXPORT_SYMBOL(__read_lock_failed);
+
+/* Global SMP stuff */
+EXPORT_SYMBOL(smp_call_function);
+
+/* TLB flushing */
+EXPORT_SYMBOL(flush_tlb_page);
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+#endif
+
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
+
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(screen_info);
+#endif
+
+EXPORT_SYMBOL(get_wchan);
+
+EXPORT_SYMBOL(rtc_lock);
+
+EXPORT_SYMBOL_GPL(set_nmi_callback);
+EXPORT_SYMBOL_GPL(unset_nmi_callback);
+
+#undef memcmp
+extern int memcmp(const void *,const void *,__kernel_size_t);
+EXPORT_SYMBOL(memcmp);
+
+EXPORT_SYMBOL(register_die_notifier);
+#ifdef CONFIG_HAVE_DEC_LOCK
+EXPORT_SYMBOL(_atomic_dec_and_lock);
+#endif
+
+EXPORT_SYMBOL(__PAGE_KERNEL);
+
+#ifdef CONFIG_HIGHMEM
+EXPORT_SYMBOL(kmap);
+EXPORT_SYMBOL(kunmap);
+EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_to_page);
+#endif
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
+
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/i386/kernel/i387.c b/arch/i386/kernel/i387.c
new file mode 100644
index 0000000..c55e037
--- /dev/null
+++ b/arch/i386/kernel/i387.c
@@ -0,0 +1,555 @@
+/*
+ * linux/arch/i386/kernel/i387.c
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/math_emu.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_MATH_EMULATION
+#define HAVE_HWFP (boot_cpu_data.hard_math)
+#else
+#define HAVE_HWFP 1
+#endif
+
+static unsigned long mxcsr_feature_mask = 0xffffffff;
+
+void mxcsr_feature_mask_init(void)
+{
+ unsigned long mask = 0;
+ clts();
+ if (cpu_has_fxsr) {
+ memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
+ asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave));
+ mask = current->thread.i387.fxsave.mxcsr_mask;
+ if (mask == 0) mask = 0x0000ffbf;
+ }
+ mxcsr_feature_mask &= mask;
+ stts();
+}
+
+/*
+ * The _current_ task is using the FPU for the first time
+ * so initialize it and set the mxcsr to its default
+ * value at reset if we support XMM instructions and then
+ * remeber the current task has used the FPU.
+ */
+void init_fpu(struct task_struct *tsk)
+{
+ if (cpu_has_fxsr) {
+ memset(&tsk->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
+ tsk->thread.i387.fxsave.cwd = 0x37f;
+ if (cpu_has_xmm)
+ tsk->thread.i387.fxsave.mxcsr = 0x1f80;
+ } else {
+ memset(&tsk->thread.i387.fsave, 0, sizeof(struct i387_fsave_struct));
+ tsk->thread.i387.fsave.cwd = 0xffff037fu;
+ tsk->thread.i387.fsave.swd = 0xffff0000u;
+ tsk->thread.i387.fsave.twd = 0xffffffffu;
+ tsk->thread.i387.fsave.fos = 0xffff0000u;
+ }
+ /* only the device not available exception or ptrace can call init_fpu */
+ set_stopped_child_used_math(tsk);
+}
+
+/*
+ * FPU lazy state save handling.
+ */
+
+void kernel_fpu_begin(void)
+{
+ struct thread_info *thread = current_thread_info();
+
+ preempt_disable();
+ if (thread->status & TS_USEDFPU) {
+ __save_init_fpu(thread->task);
+ return;
+ }
+ clts();
+}
+
+void restore_fpu( struct task_struct *tsk )
+{
+ if ( cpu_has_fxsr ) {
+ asm volatile( "fxrstor %0"
+ : : "m" (tsk->thread.i387.fxsave) );
+ } else {
+ asm volatile( "frstor %0"
+ : : "m" (tsk->thread.i387.fsave) );
+ }
+}
+
+/*
+ * FPU tag word conversions.
+ */
+
+static inline unsigned short twd_i387_to_fxsr( unsigned short twd )
+{
+ unsigned int tmp; /* to avoid 16 bit prefixes in the code */
+
+ /* Transform each pair of bits into 01 (valid) or 00 (empty) */
+ tmp = ~twd;
+ tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
+ /* and move the valid bits to the lower byte. */
+ tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
+ tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
+ tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+ return tmp;
+}
+
+static inline unsigned long twd_fxsr_to_i387( struct i387_fxsave_struct *fxsave )
+{
+ struct _fpxreg *st = NULL;
+ unsigned long tos = (fxsave->swd >> 11) & 7;
+ unsigned long twd = (unsigned long) fxsave->twd;
+ unsigned long tag;
+ unsigned long ret = 0xffff0000u;
+ int i;
+
+#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16);
+
+ for ( i = 0 ; i < 8 ; i++ ) {
+ if ( twd & 0x1 ) {
+ st = FPREG_ADDR( fxsave, (i - tos) & 7 );
+
+ switch ( st->exponent & 0x7fff ) {
+ case 0x7fff:
+ tag = 2; /* Special */
+ break;
+ case 0x0000:
+ if ( !st->significand[0] &&
+ !st->significand[1] &&
+ !st->significand[2] &&
+ !st->significand[3] ) {
+ tag = 1; /* Zero */
+ } else {
+ tag = 2; /* Special */
+ }
+ break;
+ default:
+ if ( st->significand[3] & 0x8000 ) {
+ tag = 0; /* Valid */
+ } else {
+ tag = 2; /* Special */
+ }
+ break;
+ }
+ } else {
+ tag = 3; /* Empty */
+ }
+ ret |= (tag << (2 * i));
+ twd = twd >> 1;
+ }
+ return ret;
+}
+
+/*
+ * FPU state interaction.
+ */
+
+unsigned short get_fpu_cwd( struct task_struct *tsk )
+{
+ if ( cpu_has_fxsr ) {
+ return tsk->thread.i387.fxsave.cwd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.cwd;
+ }
+}
+
+unsigned short get_fpu_swd( struct task_struct *tsk )
+{
+ if ( cpu_has_fxsr ) {
+ return tsk->thread.i387.fxsave.swd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.swd;
+ }
+}
+
+#if 0
+unsigned short get_fpu_twd( struct task_struct *tsk )
+{
+ if ( cpu_has_fxsr ) {
+ return tsk->thread.i387.fxsave.twd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.twd;
+ }
+}
+#endif /* 0 */
+
+unsigned short get_fpu_mxcsr( struct task_struct *tsk )
+{
+ if ( cpu_has_xmm ) {
+ return tsk->thread.i387.fxsave.mxcsr;
+ } else {
+ return 0x1f80;
+ }
+}
+
+#if 0
+
+void set_fpu_cwd( struct task_struct *tsk, unsigned short cwd )
+{
+ if ( cpu_has_fxsr ) {
+ tsk->thread.i387.fxsave.cwd = cwd;
+ } else {
+ tsk->thread.i387.fsave.cwd = ((long)cwd | 0xffff0000u);
+ }
+}
+
+void set_fpu_swd( struct task_struct *tsk, unsigned short swd )
+{
+ if ( cpu_has_fxsr ) {
+ tsk->thread.i387.fxsave.swd = swd;
+ } else {
+ tsk->thread.i387.fsave.swd = ((long)swd | 0xffff0000u);
+ }
+}
+
+void set_fpu_twd( struct task_struct *tsk, unsigned short twd )
+{
+ if ( cpu_has_fxsr ) {
+ tsk->thread.i387.fxsave.twd = twd_i387_to_fxsr(twd);
+ } else {
+ tsk->thread.i387.fsave.twd = ((long)twd | 0xffff0000u);
+ }
+}
+
+#endif /* 0 */
+
+/*
+ * FXSR floating point environment conversions.
+ */
+
+static int convert_fxsr_to_user( struct _fpstate __user *buf,
+ struct i387_fxsave_struct *fxsave )
+{
+ unsigned long env[7];
+ struct _fpreg __user *to;
+ struct _fpxreg *from;
+ int i;
+
+ env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul;
+ env[1] = (unsigned long)fxsave->swd | 0xffff0000ul;
+ env[2] = twd_fxsr_to_i387(fxsave);
+ env[3] = fxsave->fip;
+ env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16);
+ env[5] = fxsave->foo;
+ env[6] = fxsave->fos;
+
+ if ( __copy_to_user( buf, env, 7 * sizeof(unsigned long) ) )
+ return 1;
+
+ to = &buf->_st[0];
+ from = (struct _fpxreg *) &fxsave->st_space[0];
+ for ( i = 0 ; i < 8 ; i++, to++, from++ ) {
+ unsigned long __user *t = (unsigned long __user *)to;
+ unsigned long *f = (unsigned long *)from;
+
+ if (__put_user(*f, t) ||
+ __put_user(*(f + 1), t + 1) ||
+ __put_user(from->exponent, &to->exponent))
+ return 1;
+ }
+ return 0;
+}
+
+static int convert_fxsr_from_user( struct i387_fxsave_struct *fxsave,
+ struct _fpstate __user *buf )
+{
+ unsigned long env[7];
+ struct _fpxreg *to;
+ struct _fpreg __user *from;
+ int i;
+
+ if ( __copy_from_user( env, buf, 7 * sizeof(long) ) )
+ return 1;
+
+ fxsave->cwd = (unsigned short)(env[0] & 0xffff);
+ fxsave->swd = (unsigned short)(env[1] & 0xffff);
+ fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff));
+ fxsave->fip = env[3];
+ fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16);
+ fxsave->fcs = (env[4] & 0xffff);
+ fxsave->foo = env[5];
+ fxsave->fos = env[6];
+
+ to = (struct _fpxreg *) &fxsave->st_space[0];
+ from = &buf->_st[0];
+ for ( i = 0 ; i < 8 ; i++, to++, from++ ) {
+ unsigned long *t = (unsigned long *)to;
+ unsigned long __user *f = (unsigned long __user *)from;
+
+ if (__get_user(*t, f) ||
+ __get_user(*(t + 1), f + 1) ||
+ __get_user(to->exponent, &from->exponent))
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387_fsave( struct _fpstate __user *buf )
+{
+ struct task_struct *tsk = current;
+
+ unlazy_fpu( tsk );
+ tsk->thread.i387.fsave.status = tsk->thread.i387.fsave.swd;
+ if ( __copy_to_user( buf, &tsk->thread.i387.fsave,
+ sizeof(struct i387_fsave_struct) ) )
+ return -1;
+ return 1;
+}
+
+static int save_i387_fxsave( struct _fpstate __user *buf )
+{
+ struct task_struct *tsk = current;
+ int err = 0;
+
+ unlazy_fpu( tsk );
+
+ if ( convert_fxsr_to_user( buf, &tsk->thread.i387.fxsave ) )
+ return -1;
+
+ err |= __put_user( tsk->thread.i387.fxsave.swd, &buf->status );
+ err |= __put_user( X86_FXSR_MAGIC, &buf->magic );
+ if ( err )
+ return -1;
+
+ if ( __copy_to_user( &buf->_fxsr_env[0], &tsk->thread.i387.fxsave,
+ sizeof(struct i387_fxsave_struct) ) )
+ return -1;
+ return 1;
+}
+
+int save_i387( struct _fpstate __user *buf )
+{
+ if ( !used_math() )
+ return 0;
+
+ /* This will cause a "finit" to be triggered by the next
+ * attempted FPU operation by the 'current' process.
+ */
+ clear_used_math();
+
+ if ( HAVE_HWFP ) {
+ if ( cpu_has_fxsr ) {
+ return save_i387_fxsave( buf );
+ } else {
+ return save_i387_fsave( buf );
+ }
+ } else {
+ return save_i387_soft( ¤t->thread.i387.soft, buf );
+ }
+}
+
+static inline int restore_i387_fsave( struct _fpstate __user *buf )
+{
+ struct task_struct *tsk = current;
+ clear_fpu( tsk );
+ return __copy_from_user( &tsk->thread.i387.fsave, buf,
+ sizeof(struct i387_fsave_struct) );
+}
+
+static int restore_i387_fxsave( struct _fpstate __user *buf )
+{
+ int err;
+ struct task_struct *tsk = current;
+ clear_fpu( tsk );
+ err = __copy_from_user( &tsk->thread.i387.fxsave, &buf->_fxsr_env[0],
+ sizeof(struct i387_fxsave_struct) );
+ /* mxcsr reserved bits must be masked to zero for security reasons */
+ tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+ return err ? 1 : convert_fxsr_from_user( &tsk->thread.i387.fxsave, buf );
+}
+
+int restore_i387( struct _fpstate __user *buf )
+{
+ int err;
+
+ if ( HAVE_HWFP ) {
+ if ( cpu_has_fxsr ) {
+ err = restore_i387_fxsave( buf );
+ } else {
+ err = restore_i387_fsave( buf );
+ }
+ } else {
+ err = restore_i387_soft( ¤t->thread.i387.soft, buf );
+ }
+ set_used_math();
+ return err;
+}
+
+/*
+ * ptrace request handlers.
+ */
+
+static inline int get_fpregs_fsave( struct user_i387_struct __user *buf,
+ struct task_struct *tsk )
+{
+ return __copy_to_user( buf, &tsk->thread.i387.fsave,
+ sizeof(struct user_i387_struct) );
+}
+
+static inline int get_fpregs_fxsave( struct user_i387_struct __user *buf,
+ struct task_struct *tsk )
+{
+ return convert_fxsr_to_user( (struct _fpstate __user *)buf,
+ &tsk->thread.i387.fxsave );
+}
+
+int get_fpregs( struct user_i387_struct __user *buf, struct task_struct *tsk )
+{
+ if ( HAVE_HWFP ) {
+ if ( cpu_has_fxsr ) {
+ return get_fpregs_fxsave( buf, tsk );
+ } else {
+ return get_fpregs_fsave( buf, tsk );
+ }
+ } else {
+ return save_i387_soft( &tsk->thread.i387.soft,
+ (struct _fpstate __user *)buf );
+ }
+}
+
+static inline int set_fpregs_fsave( struct task_struct *tsk,
+ struct user_i387_struct __user *buf )
+{
+ return __copy_from_user( &tsk->thread.i387.fsave, buf,
+ sizeof(struct user_i387_struct) );
+}
+
+static inline int set_fpregs_fxsave( struct task_struct *tsk,
+ struct user_i387_struct __user *buf )
+{
+ return convert_fxsr_from_user( &tsk->thread.i387.fxsave,
+ (struct _fpstate __user *)buf );
+}
+
+int set_fpregs( struct task_struct *tsk, struct user_i387_struct __user *buf )
+{
+ if ( HAVE_HWFP ) {
+ if ( cpu_has_fxsr ) {
+ return set_fpregs_fxsave( tsk, buf );
+ } else {
+ return set_fpregs_fsave( tsk, buf );
+ }
+ } else {
+ return restore_i387_soft( &tsk->thread.i387.soft,
+ (struct _fpstate __user *)buf );
+ }
+}
+
+int get_fpxregs( struct user_fxsr_struct __user *buf, struct task_struct *tsk )
+{
+ if ( cpu_has_fxsr ) {
+ if (__copy_to_user( buf, &tsk->thread.i387.fxsave,
+ sizeof(struct user_fxsr_struct) ))
+ return -EFAULT;
+ return 0;
+ } else {
+ return -EIO;
+ }
+}
+
+int set_fpxregs( struct task_struct *tsk, struct user_fxsr_struct __user *buf )
+{
+ int ret = 0;
+
+ if ( cpu_has_fxsr ) {
+ if (__copy_from_user( &tsk->thread.i387.fxsave, buf,
+ sizeof(struct user_fxsr_struct) ))
+ ret = -EFAULT;
+ /* mxcsr reserved bits must be masked to zero for security reasons */
+ tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+ } else {
+ ret = -EIO;
+ }
+ return ret;
+}
+
+/*
+ * FPU state for core dumps.
+ */
+
+static inline void copy_fpu_fsave( struct task_struct *tsk,
+ struct user_i387_struct *fpu )
+{
+ memcpy( fpu, &tsk->thread.i387.fsave,
+ sizeof(struct user_i387_struct) );
+}
+
+static inline void copy_fpu_fxsave( struct task_struct *tsk,
+ struct user_i387_struct *fpu )
+{
+ unsigned short *to;
+ unsigned short *from;
+ int i;
+
+ memcpy( fpu, &tsk->thread.i387.fxsave, 7 * sizeof(long) );
+
+ to = (unsigned short *)&fpu->st_space[0];
+ from = (unsigned short *)&tsk->thread.i387.fxsave.st_space[0];
+ for ( i = 0 ; i < 8 ; i++, to += 5, from += 8 ) {
+ memcpy( to, from, 5 * sizeof(unsigned short) );
+ }
+}
+
+int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu )
+{
+ int fpvalid;
+ struct task_struct *tsk = current;
+
+ fpvalid = !!used_math();
+ if ( fpvalid ) {
+ unlazy_fpu( tsk );
+ if ( cpu_has_fxsr ) {
+ copy_fpu_fxsave( tsk, fpu );
+ } else {
+ copy_fpu_fsave( tsk, fpu );
+ }
+ }
+
+ return fpvalid;
+}
+
+int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu)
+{
+ int fpvalid = !!tsk_used_math(tsk);
+
+ if (fpvalid) {
+ if (tsk == current)
+ unlazy_fpu(tsk);
+ if (cpu_has_fxsr)
+ copy_fpu_fxsave(tsk, fpu);
+ else
+ copy_fpu_fsave(tsk, fpu);
+ }
+ return fpvalid;
+}
+
+int dump_task_extended_fpu(struct task_struct *tsk, struct user_fxsr_struct *fpu)
+{
+ int fpvalid = tsk_used_math(tsk) && cpu_has_fxsr;
+
+ if (fpvalid) {
+ if (tsk == current)
+ unlazy_fpu(tsk);
+ memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(*fpu));
+ }
+ return fpvalid;
+}
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
new file mode 100644
index 0000000..560bef1
--- /dev/null
+++ b/arch/i386/kernel/i8259.c
@@ -0,0 +1,429 @@
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/8253pit.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+#include <linux/irq.h>
+
+#include <io_ports.h>
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ * this file should become arch/i386/kernel/irq.c when the old irq.c
+ * moves to arch independent land
+ */
+
+DEFINE_SPINLOCK(i8259A_lock);
+
+static void end_8259A_irq (unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
+ irq_desc[irq].action)
+ enable_8259A_irq(irq);
+}
+
+#define shutdown_8259A_irq disable_8259A_irq
+
+static void mask_and_ack_8259A(unsigned int);
+
+unsigned int startup_8259A_irq(unsigned int irq)
+{
+ enable_8259A_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type i8259A_irq_type = {
+ .typename = "XT-PIC",
+ .startup = startup_8259A_irq,
+ .shutdown = shutdown_8259A_irq,
+ .enable = enable_8259A_irq,
+ .disable = disable_8259A_irq,
+ .ack = mask_and_ack_8259A,
+ .end = end_8259A_irq,
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+unsigned int cached_irq_mask = 0xffff;
+
+/*
+ * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
+ * boards the timer interrupt is not really connected to any IO-APIC pin,
+ * it's fed to the master 8259A's IR0 line only.
+ *
+ * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
+ * this 'mixed mode' IRQ handling costs nothing because it's only used
+ * at IRQ setup time.
+ */
+unsigned long io_apic_irqs;
+
+void disable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = 1 << irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ cached_irq_mask |= mask;
+ if (irq & 8)
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ else
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = ~(1 << irq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ cached_irq_mask &= mask;
+ if (irq & 8)
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ else
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+ unsigned int mask = 1<<irq;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ if (irq < 8)
+ ret = inb(PIC_MASTER_CMD) & mask;
+ else
+ ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ io_apic_irqs &= ~(1<<irq);
+ irq_desc[irq].handler = &i8259A_irq_type;
+ enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+ int value;
+ int irqmask = 1<<irq;
+
+ if (irq < 8) {
+ outb(0x0B,PIC_MASTER_CMD); /* ISR register */
+ value = inb(PIC_MASTER_CMD) & irqmask;
+ outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
+ return value;
+ }
+ outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
+ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+ outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
+ return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+static void mask_and_ack_8259A(unsigned int irq)
+{
+ unsigned int irqmask = 1 << irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ /*
+ * Lightweight spurious IRQ detection. We do not want
+ * to overdo spurious IRQ handling - it's usually a sign
+ * of hardware problems, so we only do the checks we can
+ * do without slowing down good hardware unnecesserily.
+ *
+ * Note that IRQ7 and IRQ15 (the two spurious IRQs
+ * usually resulting from the 8259A-1|2 PICs) occur
+ * even if the IRQ is masked in the 8259A. Thus we
+ * can check spurious 8259A IRQs without doing the
+ * quite slow i8259A_irq_real() call for every IRQ.
+ * This does not cover 100% of spurious interrupts,
+ * but should be enough to warn the user that there
+ * is something bad going on ...
+ */
+ if (cached_irq_mask & irqmask)
+ goto spurious_8259A_irq;
+ cached_irq_mask |= irqmask;
+
+handle_real_irq:
+ if (irq & 8) {
+ inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+ outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+ } else {
+ inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
+ }
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+ return;
+
+spurious_8259A_irq:
+ /*
+ * this is the slow path - should happen rarely.
+ */
+ if (i8259A_irq_real(irq))
+ /*
+ * oops, the IRQ _is_ in service according to the
+ * 8259A - not spurious, go handle it.
+ */
+ goto handle_real_irq;
+
+ {
+ static int spurious_irq_mask;
+ /*
+ * At this point we can be sure the IRQ is spurious,
+ * lets ACK and report it. [once per IRQ]
+ */
+ if (!(spurious_irq_mask & irqmask)) {
+ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+ spurious_irq_mask |= irqmask;
+ }
+ atomic_inc(&irq_err_count);
+ /*
+ * Theoretically we do not have to handle this IRQ,
+ * but in Linux this does not cause problems and is
+ * simpler for us.
+ */
+ goto handle_real_irq;
+ }
+}
+
+static char irq_trigger[2];
+/**
+ * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
+ */
+static void restore_ELCR(char *trigger)
+{
+ outb(trigger[0], 0x4d0);
+ outb(trigger[1], 0x4d1);
+}
+
+static void save_ELCR(char *trigger)
+{
+ /* IRQ 0,1,2,8,13 are marked as reserved */
+ trigger[0] = inb(0x4d0) & 0xF8;
+ trigger[1] = inb(0x4d1) & 0xDE;
+}
+
+static int i8259A_resume(struct sys_device *dev)
+{
+ init_8259A(0);
+ restore_ELCR(irq_trigger);
+ return 0;
+}
+
+static int i8259A_suspend(struct sys_device *dev, u32 state)
+{
+ save_ELCR(irq_trigger);
+ return 0;
+}
+
+static struct sysdev_class i8259_sysdev_class = {
+ set_kset_name("i8259"),
+ .suspend = i8259A_suspend,
+ .resume = i8259A_resume,
+};
+
+static struct sys_device device_i8259A = {
+ .id = 0,
+ .cls = &i8259_sysdev_class,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+ int error = sysdev_class_register(&i8259_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_i8259A);
+ return error;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+void init_8259A(int auto_eoi)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
+
+ /*
+ * outb_p - this has to work on a wide range of PC hardware.
+ */
+ outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
+ outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+ outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */
+ if (auto_eoi) /* master does Auto EOI */
+ outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+ else /* master expects normal EOI */
+ outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+ outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
+ outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+ outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */
+ outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+ if (auto_eoi)
+ /*
+ * in AEOI mode we just have to mask the interrupt
+ * when acking.
+ */
+ i8259A_irq_type.ack = disable_8259A_irq;
+ else
+ i8259A_irq_type.ack = mask_and_ack_8259A;
+
+ udelay(100); /* wait for 8259A to initialize */
+
+ outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ extern void math_error(void __user *);
+ outb(0,0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)regs->eip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL };
+
+void __init init_ISA_irqs (void)
+{
+ int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+
+ if (i < 16) {
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ irq_desc[i].handler = &i8259A_irq_type;
+ } else {
+ /*
+ * 'high' PCI IRQs filled in on demand
+ */
+ irq_desc[i].handler = &no_irq_type;
+ }
+ }
+}
+
+void __init init_IRQ(void)
+{
+ int i;
+
+ /* all the set up before the call gates are initialised */
+ pre_intr_init_hook();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (i >= NR_IRQS)
+ break;
+ if (vector != SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+ /* setup after call gates are initialised (usually add in
+ * the architecture specific gates)
+ */
+ intr_init_hook();
+
+ /*
+ * Set the clock to HZ Hz, we already have a valid
+ * vector now:
+ */
+ setup_pit_timer();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/i386/kernel/init_task.c b/arch/i386/kernel/init_task.c
new file mode 100644
index 0000000..9caa8e8
--- /dev/null
+++ b/arch/i386/kernel/init_task.c
@@ -0,0 +1,46 @@
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
+
+/*
+ * per-CPU TSS segments. Threads are completely 'soft' on Linux,
+ * no more per-task TSS's.
+ */
+DEFINE_PER_CPU(struct tss_struct, init_tss) ____cacheline_maxaligned_in_smp = INIT_TSS;
+
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
new file mode 100644
index 0000000..9c1350e
--- /dev/null
+++ b/arch/i386/kernel/io_apic.c
@@ -0,0 +1,2545 @@
+/*
+ * Intel IO-APIC support for multi-Pentium hosts.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *
+ * Many thanks to Stig Venaas for trying out countless experimental
+ * patches and reporting/debugging problems patiently!
+ *
+ * (c) 1999, Multiple IO-APIC support, developed by
+ * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ * further tested and cleaned up by Zach Brown <zab@redhat.com>
+ * and Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
+ * thanks to Eric Gilmore
+ * and Rolf G. Tews
+ * for testing these extensively
+ * Paul Diefenbaugh : Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+
+#include <linux/sysdev.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/timer.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+int (*ioapic_renumber_irq)(int ioapic, int irq);
+atomic_t irq_mis_count;
+
+static DEFINE_SPINLOCK(ioapic_lock);
+
+/*
+ * Is the SiS APIC rmw bug present ?
+ * -1 = don't know, 0 = no, 1 = yes
+ */
+int sis_apic_bug = -1;
+
+/*
+ * # of IRQ routing registers
+ */
+int nr_ioapic_registers[MAX_IO_APICS];
+
+/*
+ * Rough estimation of how many shared IRQs there are, can
+ * be changed anytime.
+ */
+#define MAX_PLUS_SHARED_IRQS NR_IRQS
+#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
+
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * the indexing order of this array favors 1:1 mappings
+ * between pins and IRQs.
+ */
+
+static struct irq_pin_list {
+ int apic, pin, next;
+} irq_2_pin[PIN_MAP_SIZE];
+
+int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+#ifdef CONFIG_PCI_MSI
+#define vector_to_irq(vector) \
+ (platform_legacy_irq(vector) ? vector : vector_irq[vector])
+#else
+#define vector_to_irq(vector) (vector)
+#endif
+
+/*
+ * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
+ * shared ISA-space IRQs, so we have to support them. We are super
+ * fast in the common case, and fast for shared ISA-space IRQs.
+ */
+static void add_pin_to_irq(unsigned int irq, int apic, int pin)
+{
+ static int first_free_entry = NR_IRQS;
+ struct irq_pin_list *entry = irq_2_pin + irq;
+
+ while (entry->next)
+ entry = irq_2_pin + entry->next;
+
+ if (entry->pin != -1) {
+ entry->next = first_free_entry;
+ entry = irq_2_pin + entry->next;
+ if (++first_free_entry >= PIN_MAP_SIZE)
+ panic("io_apic.c: whoops");
+ }
+ entry->apic = apic;
+ entry->pin = pin;
+}
+
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+ int oldapic, int oldpin,
+ int newapic, int newpin)
+{
+ struct irq_pin_list *entry = irq_2_pin + irq;
+
+ while (1) {
+ if (entry->apic == oldapic && entry->pin == oldpin) {
+ entry->apic = newapic;
+ entry->pin = newpin;
+ }
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+}
+
+static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
+{
+ struct irq_pin_list *entry = irq_2_pin + irq;
+ unsigned int pin, reg;
+
+ for (;;) {
+ pin = entry->pin;
+ if (pin == -1)
+ break;
+ reg = io_apic_read(entry->apic, 0x10 + pin*2);
+ reg &= ~disable;
+ reg |= enable;
+ io_apic_modify(entry->apic, 0x10 + pin*2, reg);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+}
+
+/* mask = 1 */
+static void __mask_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00010000, 0);
+}
+
+/* mask = 0 */
+static void __unmask_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0, 0x00010000);
+}
+
+/* mask = 1, trigger = 0 */
+static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
+}
+
+/* mask = 0, trigger = 1 */
+static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
+{
+ __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
+}
+
+static void mask_IO_APIC_irq (unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __mask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void unmask_IO_APIC_irq (unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __unmask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
+{
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ /* Check delivery_mode to be sure we're not clearing an SMI pin */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+ *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ if (entry.delivery_mode == dest_SMI)
+ return;
+
+ /*
+ * Disable it in the IO-APIC irq-routing table:
+ */
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 1;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC (void)
+{
+ int apic, pin;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+ clear_IO_APIC_pin(apic, pin);
+}
+
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
+{
+ unsigned long flags;
+ int pin;
+ struct irq_pin_list *entry = irq_2_pin + irq;
+ unsigned int apicid_value;
+
+ apicid_value = cpu_mask_to_apicid(cpumask);
+ /* Prepare to do the io_apic_write */
+ apicid_value = apicid_value << 24;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ for (;;) {
+ pin = entry->pin;
+ if (pin == -1)
+ break;
+ io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+#if defined(CONFIG_IRQBALANCE)
+# include <asm/processor.h> /* kernel_thread() */
+# include <linux/kernel_stat.h> /* kstat */
+# include <linux/slab.h> /* kmalloc() */
+# include <linux/timer.h> /* time_after() */
+
+# ifdef CONFIG_BALANCED_IRQ_DEBUG
+# define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0)
+# define Dprintk(x...) do { TDprintk(x); } while (0)
+# else
+# define TDprintk(x...)
+# define Dprintk(x...)
+# endif
+
+cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS];
+
+#define IRQBALANCE_CHECK_ARCH -999
+static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
+static int physical_balance = 0;
+
+static struct irq_cpu_info {
+ unsigned long * last_irq;
+ unsigned long * irq_delta;
+ unsigned long irq;
+} irq_cpu_data[NR_CPUS];
+
+#define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq)
+#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq])
+#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq])
+
+#define IDLE_ENOUGH(cpu,now) \
+ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
+
+#define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask)
+
+#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i]))
+
+#define MAX_BALANCED_IRQ_INTERVAL (5*HZ)
+#define MIN_BALANCED_IRQ_INTERVAL (HZ/2)
+#define BALANCED_IRQ_MORE_DELTA (HZ/10)
+#define BALANCED_IRQ_LESS_DELTA (HZ)
+
+static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL;
+
+static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
+ unsigned long now, int direction)
+{
+ int search_idle = 1;
+ int cpu = curr_cpu;
+
+ goto inside;
+
+ do {
+ if (unlikely(cpu == curr_cpu))
+ search_idle = 0;
+inside:
+ if (direction == 1) {
+ cpu++;
+ if (cpu >= NR_CPUS)
+ cpu = 0;
+ } else {
+ cpu--;
+ if (cpu == -1)
+ cpu = NR_CPUS-1;
+ }
+ } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
+ (search_idle && !IDLE_ENOUGH(cpu,now)));
+
+ return cpu;
+}
+
+static inline void balance_irq(int cpu, int irq)
+{
+ unsigned long now = jiffies;
+ cpumask_t allowed_mask;
+ unsigned int new_cpu;
+
+ if (irqbalance_disabled)
+ return;
+
+ cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
+ new_cpu = move(cpu, allowed_mask, now, 1);
+ if (cpu != new_cpu) {
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ }
+}
+
+static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
+{
+ int i, j;
+ Dprintk("Rotating IRQs among CPUs.\n");
+ for (i = 0; i < NR_CPUS; i++) {
+ for (j = 0; cpu_online(i) && (j < NR_IRQS); j++) {
+ if (!irq_desc[j].action)
+ continue;
+ /* Is it a significant load ? */
+ if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
+ useful_load_threshold)
+ continue;
+ balance_irq(i, j);
+ }
+ }
+ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
+ balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
+ return;
+}
+
+static void do_irq_balance(void)
+{
+ int i, j;
+ unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
+ unsigned long move_this_load = 0;
+ int max_loaded = 0, min_loaded = 0;
+ int load;
+ unsigned long useful_load_threshold = balanced_irq_interval + 10;
+ int selected_irq;
+ int tmp_loaded, first_attempt = 1;
+ unsigned long tmp_cpu_irq;
+ unsigned long imbalance = 0;
+ cpumask_t allowed_mask, target_cpu_mask, tmp;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ int package_index;
+ CPU_IRQ(i) = 0;
+ if (!cpu_online(i))
+ continue;
+ package_index = CPU_TO_PACKAGEINDEX(i);
+ for (j = 0; j < NR_IRQS; j++) {
+ unsigned long value_now, delta;
+ /* Is this an active IRQ? */
+ if (!irq_desc[j].action)
+ continue;
+ if ( package_index == i )
+ IRQ_DELTA(package_index,j) = 0;
+ /* Determine the total count per processor per IRQ */
+ value_now = (unsigned long) kstat_cpu(i).irqs[j];
+
+ /* Determine the activity per processor per IRQ */
+ delta = value_now - LAST_CPU_IRQ(i,j);
+
+ /* Update last_cpu_irq[][] for the next time */
+ LAST_CPU_IRQ(i,j) = value_now;
+
+ /* Ignore IRQs whose rate is less than the clock */
+ if (delta < useful_load_threshold)
+ continue;
+ /* update the load for the processor or package total */
+ IRQ_DELTA(package_index,j) += delta;
+
+ /* Keep track of the higher numbered sibling as well */
+ if (i != package_index)
+ CPU_IRQ(i) += delta;
+ /*
+ * We have sibling A and sibling B in the package
+ *
+ * cpu_irq[A] = load for cpu A + load for cpu B
+ * cpu_irq[B] = load for cpu B
+ */
+ CPU_IRQ(package_index) += delta;
+ }
+ }
+ /* Find the least loaded processor package */
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_online(i))
+ continue;
+ if (i != CPU_TO_PACKAGEINDEX(i))
+ continue;
+ if (min_cpu_irq > CPU_IRQ(i)) {
+ min_cpu_irq = CPU_IRQ(i);
+ min_loaded = i;
+ }
+ }
+ max_cpu_irq = ULONG_MAX;
+
+tryanothercpu:
+ /* Look for heaviest loaded processor.
+ * We may come back to get the next heaviest loaded processor.
+ * Skip processors with trivial loads.
+ */
+ tmp_cpu_irq = 0;
+ tmp_loaded = -1;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_online(i))
+ continue;
+ if (i != CPU_TO_PACKAGEINDEX(i))
+ continue;
+ if (max_cpu_irq <= CPU_IRQ(i))
+ continue;
+ if (tmp_cpu_irq < CPU_IRQ(i)) {
+ tmp_cpu_irq = CPU_IRQ(i);
+ tmp_loaded = i;
+ }
+ }
+
+ if (tmp_loaded == -1) {
+ /* In the case of small number of heavy interrupt sources,
+ * loading some of the cpus too much. We use Ingo's original
+ * approach to rotate them around.
+ */
+ if (!first_attempt && imbalance >= useful_load_threshold) {
+ rotate_irqs_among_cpus(useful_load_threshold);
+ return;
+ }
+ goto not_worth_the_effort;
+ }
+
+ first_attempt = 0; /* heaviest search */
+ max_cpu_irq = tmp_cpu_irq; /* load */
+ max_loaded = tmp_loaded; /* processor */
+ imbalance = (max_cpu_irq - min_cpu_irq) / 2;
+
+ Dprintk("max_loaded cpu = %d\n", max_loaded);
+ Dprintk("min_loaded cpu = %d\n", min_loaded);
+ Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq);
+ Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq);
+ Dprintk("load imbalance = %lu\n", imbalance);
+
+ /* if imbalance is less than approx 10% of max load, then
+ * observe diminishing returns action. - quit
+ */
+ if (imbalance < (max_cpu_irq >> 3)) {
+ Dprintk("Imbalance too trivial\n");
+ goto not_worth_the_effort;
+ }
+
+tryanotherirq:
+ /* if we select an IRQ to move that can't go where we want, then
+ * see if there is another one to try.
+ */
+ move_this_load = 0;
+ selected_irq = -1;
+ for (j = 0; j < NR_IRQS; j++) {
+ /* Is this an active IRQ? */
+ if (!irq_desc[j].action)
+ continue;
+ if (imbalance <= IRQ_DELTA(max_loaded,j))
+ continue;
+ /* Try to find the IRQ that is closest to the imbalance
+ * without going over.
+ */
+ if (move_this_load < IRQ_DELTA(max_loaded,j)) {
+ move_this_load = IRQ_DELTA(max_loaded,j);
+ selected_irq = j;
+ }
+ }
+ if (selected_irq == -1) {
+ goto tryanothercpu;
+ }
+
+ imbalance = move_this_load;
+
+ /* For physical_balance case, we accumlated both load
+ * values in the one of the siblings cpu_irq[],
+ * to use the same code for physical and logical processors
+ * as much as possible.
+ *
+ * NOTE: the cpu_irq[] array holds the sum of the load for
+ * sibling A and sibling B in the slot for the lowest numbered
+ * sibling (A), _AND_ the load for sibling B in the slot for
+ * the higher numbered sibling.
+ *
+ * We seek the least loaded sibling by making the comparison
+ * (A+B)/2 vs B
+ */
+ load = CPU_IRQ(min_loaded) >> 1;
+ for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) {
+ if (load > CPU_IRQ(j)) {
+ /* This won't change cpu_sibling_map[min_loaded] */
+ load = CPU_IRQ(j);
+ min_loaded = j;
+ }
+ }
+
+ cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]);
+ target_cpu_mask = cpumask_of_cpu(min_loaded);
+ cpus_and(tmp, target_cpu_mask, allowed_mask);
+
+ if (!cpus_empty(tmp)) {
+ irq_desc_t *desc = irq_desc + selected_irq;
+ unsigned long flags;
+
+ Dprintk("irq = %d moved to cpu = %d\n",
+ selected_irq, min_loaded);
+ /* mark for change destination */
+ spin_lock_irqsave(&desc->lock, flags);
+ pending_irq_balance_cpumask[selected_irq] =
+ cpumask_of_cpu(min_loaded);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ /* Since we made a change, come back sooner to
+ * check for more variation.
+ */
+ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
+ balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
+ return;
+ }
+ goto tryanotherirq;
+
+not_worth_the_effort:
+ /*
+ * if we did not find an IRQ to move, then adjust the time interval
+ * upward
+ */
+ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
+ balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
+ Dprintk("IRQ worth rotating not found\n");
+ return;
+}
+
+static int balanced_irq(void *unused)
+{
+ int i;
+ unsigned long prev_balance_time = jiffies;
+ long time_remaining = balanced_irq_interval;
+
+ daemonize("kirqd");
+
+ /* push everything to CPU 0 to give us a starting point. */
+ for (i = 0 ; i < NR_IRQS ; i++) {
+ pending_irq_balance_cpumask[i] = cpumask_of_cpu(0);
+ }
+
+ for ( ; ; ) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ time_remaining = schedule_timeout(time_remaining);
+ try_to_freeze(PF_FREEZE);
+ if (time_after(jiffies,
+ prev_balance_time+balanced_irq_interval)) {
+ do_irq_balance();
+ prev_balance_time = jiffies;
+ time_remaining = balanced_irq_interval;
+ }
+ }
+ return 0;
+}
+
+static int __init balanced_irq_init(void)
+{
+ int i;
+ struct cpuinfo_x86 *c;
+ cpumask_t tmp;
+
+ cpus_shift_right(tmp, cpu_online_map, 2);
+ c = &boot_cpu_data;
+ /* When not overwritten by the command line ask subarchitecture. */
+ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
+ irqbalance_disabled = NO_BALANCE_IRQ;
+ if (irqbalance_disabled)
+ return 0;
+
+ /* disable irqbalance completely if there is only one processor online */
+ if (num_online_cpus() < 2) {
+ irqbalance_disabled = 1;
+ return 0;
+ }
+ /*
+ * Enable physical balance only if more than 1 physical processor
+ * is present
+ */
+ if (smp_num_siblings > 1 && !cpus_empty(tmp))
+ physical_balance = 1;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_online(i))
+ continue;
+ irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+ irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+ if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
+ printk(KERN_ERR "balanced_irq_init: out of memory");
+ goto failed;
+ }
+ memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
+ memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
+ }
+
+ printk(KERN_INFO "Starting balanced_irq\n");
+ if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0)
+ return 0;
+ else
+ printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
+failed:
+ for (i = 0; i < NR_CPUS; i++) {
+ if(irq_cpu_data[i].irq_delta)
+ kfree(irq_cpu_data[i].irq_delta);
+ if(irq_cpu_data[i].last_irq)
+ kfree(irq_cpu_data[i].last_irq);
+ }
+ return 0;
+}
+
+int __init irqbalance_disable(char *str)
+{
+ irqbalance_disabled = 1;
+ return 0;
+}
+
+__setup("noirqbalance", irqbalance_disable);
+
+static inline void move_irq(int irq)
+{
+ /* note - we hold the desc->lock */
+ if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) {
+ set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]);
+ cpus_clear(pending_irq_balance_cpumask[irq]);
+ }
+}
+
+late_initcall(balanced_irq_init);
+
+#else /* !CONFIG_IRQBALANCE */
+static inline void move_irq(int irq) { }
+#endif /* CONFIG_IRQBALANCE */
+
+#ifndef CONFIG_SMP
+void fastcall send_IPI_self(int vector)
+{
+ unsigned int cfg;
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+ cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+}
+#endif /* !CONFIG_SMP */
+
+
+/*
+ * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
+ * specific CPU-side IRQs.
+ */
+
+#define MAX_PIRQS 8
+static int pirq_entries [MAX_PIRQS];
+static int pirqs_enabled;
+int skip_ioapic_setup;
+
+static int __init ioapic_setup(char *str)
+{
+ skip_ioapic_setup = 1;
+ return 1;
+}
+
+__setup("noapic", ioapic_setup);
+
+static int __init ioapic_pirq_setup(char *str)
+{
+ int i, max;
+ int ints[MAX_PIRQS+1];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
+
+ for (i = 0; i < MAX_PIRQS; i++)
+ pirq_entries[i] = -1;
+
+ pirqs_enabled = 1;
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "PIRQ redirection, working around broken MP-BIOS.\n");
+ max = MAX_PIRQS;
+ if (ints[0] < MAX_PIRQS)
+ max = ints[0];
+
+ for (i = 0; i < max; i++) {
+ apic_printk(APIC_VERBOSE, KERN_DEBUG
+ "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
+ /*
+ * PIRQs are mapped upside down, usually.
+ */
+ pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
+ }
+ return 1;
+}
+
+__setup("pirq=", ioapic_pirq_setup);
+
+/*
+ * Find the IRQ entry number of a certain pin.
+ */
+static int find_irq_entry(int apic, int pin, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++)
+ if (mp_irqs[i].mpc_irqtype == type &&
+ (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
+ mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
+ mp_irqs[i].mpc_dstirq == pin)
+ return i;
+
+ return -1;
+}
+
+/*
+ * Find the pin to which IRQ[irq] (ISA) is connected
+ */
+static int find_isa_irq_pin(int irq, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+ ) &&
+ (mp_irqs[i].mpc_irqtype == type) &&
+ (mp_irqs[i].mpc_srcbusirq == irq))
+
+ return mp_irqs[i].mpc_dstirq;
+ }
+ return -1;
+}
+
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+static int pin_2_irq(int idx, int apic, int pin);
+
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
+ "slot:%d, pin:%d.\n", bus, slot, pin);
+ if (mp_bus_id_to_pci_bus[bus] == -1) {
+ printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
+ mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+ break;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+ !mp_irqs[i].mpc_irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+ return irq;
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0)
+ best_guess = irq;
+ }
+ }
+ return best_guess;
+}
+
+/*
+ * This function currently is only a helper for the i386 smp boot process where
+ * we need to reprogram the ioredtbls to cater for the cpus which have come online
+ * so mask in all cases should simply be TARGET_CPUS
+ */
+void __init setup_ioapic_dest(void)
+{
+ int pin, ioapic, irq, irq_entry;
+
+ if (skip_ioapic_setup == 1)
+ return;
+
+ for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
+ set_ioapic_affinity_irq(irq, TARGET_CPUS);
+ }
+
+ }
+}
+
+/*
+ * EISA Edge/Level control register, ELCR
+ */
+static int EISA_ELCR(unsigned int irq)
+{
+ if (irq < 16) {
+ unsigned int port = 0x4d0 + (irq >> 3);
+ return (inb(port) >> (irq & 7)) & 1;
+ }
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "Broken MPtable reports ISA irq %d\n", irq);
+ return 0;
+}
+
+/* EISA interrupts are always polarity zero and can be edge or level
+ * trigger depending on the ELCR value. If an interrupt is listed as
+ * EISA conforming in the MP table, that means its trigger type must
+ * be read in from the ELCR */
+
+#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
+#define default_EISA_polarity(idx) (0)
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx) (0)
+#define default_ISA_polarity(idx) (0)
+
+/* PCI interrupts are always polarity one level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_PCI_trigger(idx) (1)
+#define default_PCI_polarity(idx) (1)
+
+/* MCA interrupts are always polarity zero level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_MCA_trigger(idx) (1)
+#define default_MCA_polarity(idx) (0)
+
+/* NEC98 interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_NEC98_trigger(idx) (0)
+#define default_NEC98_polarity(idx) (0)
+
+static int __init MPBIOS_polarity(int idx)
+{
+ int bus = mp_irqs[idx].mpc_srcbus;
+ int polarity;
+
+ /*
+ * Determine IRQ line polarity (high active or low active):
+ */
+ switch (mp_irqs[idx].mpc_irqflag & 3)
+ {
+ case 0: /* conforms, ie. bus-type dependent polarity */
+ {
+ switch (mp_bus_id_to_type[bus])
+ {
+ case MP_BUS_ISA: /* ISA pin */
+ {
+ polarity = default_ISA_polarity(idx);
+ break;
+ }
+ case MP_BUS_EISA: /* EISA pin */
+ {
+ polarity = default_EISA_polarity(idx);
+ break;
+ }
+ case MP_BUS_PCI: /* PCI pin */
+ {
+ polarity = default_PCI_polarity(idx);
+ break;
+ }
+ case MP_BUS_MCA: /* MCA pin */
+ {
+ polarity = default_MCA_polarity(idx);
+ break;
+ }
+ case MP_BUS_NEC98: /* NEC 98 pin */
+ {
+ polarity = default_NEC98_polarity(idx);
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ polarity = 1;
+ break;
+ }
+ }
+ break;
+ }
+ case 1: /* high active */
+ {
+ polarity = 0;
+ break;
+ }
+ case 2: /* reserved */
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ polarity = 1;
+ break;
+ }
+ case 3: /* low active */
+ {
+ polarity = 1;
+ break;
+ }
+ default: /* invalid */
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ polarity = 1;
+ break;
+ }
+ }
+ return polarity;
+}
+
+static int MPBIOS_trigger(int idx)
+{
+ int bus = mp_irqs[idx].mpc_srcbus;
+ int trigger;
+
+ /*
+ * Determine IRQ trigger mode (edge or level sensitive):
+ */
+ switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+ {
+ case 0: /* conforms, ie. bus-type dependent */
+ {
+ switch (mp_bus_id_to_type[bus])
+ {
+ case MP_BUS_ISA: /* ISA pin */
+ {
+ trigger = default_ISA_trigger(idx);
+ break;
+ }
+ case MP_BUS_EISA: /* EISA pin */
+ {
+ trigger = default_EISA_trigger(idx);
+ break;
+ }
+ case MP_BUS_PCI: /* PCI pin */
+ {
+ trigger = default_PCI_trigger(idx);
+ break;
+ }
+ case MP_BUS_MCA: /* MCA pin */
+ {
+ trigger = default_MCA_trigger(idx);
+ break;
+ }
+ case MP_BUS_NEC98: /* NEC 98 pin */
+ {
+ trigger = default_NEC98_trigger(idx);
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ trigger = 1;
+ break;
+ }
+ }
+ break;
+ }
+ case 1: /* edge */
+ {
+ trigger = 0;
+ break;
+ }
+ case 2: /* reserved */
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ trigger = 1;
+ break;
+ }
+ case 3: /* level */
+ {
+ trigger = 1;
+ break;
+ }
+ default: /* invalid */
+ {
+ printk(KERN_WARNING "broken BIOS!!\n");
+ trigger = 0;
+ break;
+ }
+ }
+ return trigger;
+}
+
+static inline int irq_polarity(int idx)
+{
+ return MPBIOS_polarity(idx);
+}
+
+static inline int irq_trigger(int idx)
+{
+ return MPBIOS_trigger(idx);
+}
+
+static int pin_2_irq(int idx, int apic, int pin)
+{
+ int irq, i;
+ int bus = mp_irqs[idx].mpc_srcbus;
+
+ /*
+ * Debugging check, we are in big trouble if this message pops up!
+ */
+ if (mp_irqs[idx].mpc_dstirq != pin)
+ printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+
+ switch (mp_bus_id_to_type[bus])
+ {
+ case MP_BUS_ISA: /* ISA pin */
+ case MP_BUS_EISA:
+ case MP_BUS_MCA:
+ case MP_BUS_NEC98:
+ {
+ irq = mp_irqs[idx].mpc_srcbusirq;
+ break;
+ }
+ case MP_BUS_PCI: /* PCI pin */
+ {
+ /*
+ * PCI IRQs are mapped in order
+ */
+ i = irq = 0;
+ while (i < apic)
+ irq += nr_ioapic_registers[i++];
+ irq += pin;
+
+ /*
+ * For MPS mode, so far only needed by ES7000 platform
+ */
+ if (ioapic_renumber_irq)
+ irq = ioapic_renumber_irq(apic, irq);
+
+ break;
+ }
+ default:
+ {
+ printk(KERN_ERR "unknown bus type %d.\n",bus);
+ irq = 0;
+ break;
+ }
+ }
+
+ /*
+ * PCI IRQ command line redirection. Yes, limits are hardcoded.
+ */
+ if ((pin >= 16) && (pin <= 23)) {
+ if (pirq_entries[pin-16] != -1) {
+ if (!pirq_entries[pin-16]) {
+ apic_printk(APIC_VERBOSE, KERN_DEBUG
+ "disabling PIRQ%d\n", pin-16);
+ } else {
+ irq = pirq_entries[pin-16];
+ apic_printk(APIC_VERBOSE, KERN_DEBUG
+ "using PIRQ%d -> IRQ %d\n",
+ pin-16, irq);
+ }
+ }
+ }
+ return irq;
+}
+
+static inline int IO_APIC_irq_trigger(int irq)
+{
+ int apic, idx, pin;
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ idx = find_irq_entry(apic,pin,mp_INT);
+ if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
+ return irq_trigger(idx);
+ }
+ }
+ /*
+ * nonexistent IRQs are edge default
+ */
+ return 0;
+}
+
+/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
+u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 };
+
+int assign_irq_vector(int irq)
+{
+ static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
+
+ BUG_ON(irq >= NR_IRQ_VECTORS);
+ if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
+ return IO_APIC_VECTOR(irq);
+next:
+ current_vector += 8;
+ if (current_vector == SYSCALL_VECTOR)
+ goto next;
+
+ if (current_vector >= FIRST_SYSTEM_VECTOR) {
+ offset++;
+ if (!(offset%8))
+ return -ENOSPC;
+ current_vector = FIRST_DEVICE_VECTOR + offset;
+ }
+
+ vector_irq[current_vector] = irq;
+ if (irq != AUTO_ASSIGN)
+ IO_APIC_VECTOR(irq) = current_vector;
+
+ return current_vector;
+}
+
+static struct hw_interrupt_type ioapic_level_type;
+static struct hw_interrupt_type ioapic_edge_type;
+
+#define IOAPIC_AUTO -1
+#define IOAPIC_EDGE 0
+#define IOAPIC_LEVEL 1
+
+static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger)
+{
+ if (use_pci_vector() && !platform_legacy_irq(irq)) {
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ irq_desc[vector].handler = &ioapic_level_type;
+ else
+ irq_desc[vector].handler = &ioapic_edge_type;
+ set_intr_gate(vector, interrupt[vector]);
+ } else {
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ irq_desc[irq].handler = &ioapic_level_type;
+ else
+ irq_desc[irq].handler = &ioapic_edge_type;
+ set_intr_gate(vector, interrupt[irq]);
+ }
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+ struct IO_APIC_route_entry entry;
+ int apic, pin, idx, irq, first_notcon = 1, vector;
+ unsigned long flags;
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+
+ /*
+ * add it to the IO-APIC irq-routing table:
+ */
+ memset(&entry,0,sizeof(entry));
+
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.dest_mode = INT_DEST_MODE;
+ entry.mask = 0; /* enable IRQ */
+ entry.dest.logical.logical_dest =
+ cpu_mask_to_apicid(TARGET_CPUS);
+
+ idx = find_irq_entry(apic,pin,mp_INT);
+ if (idx == -1) {
+ if (first_notcon) {
+ apic_printk(APIC_VERBOSE, KERN_DEBUG
+ " IO-APIC (apicid-pin) %d-%d",
+ mp_ioapics[apic].mpc_apicid,
+ pin);
+ first_notcon = 0;
+ } else
+ apic_printk(APIC_VERBOSE, ", %d-%d",
+ mp_ioapics[apic].mpc_apicid, pin);
+ continue;
+ }
+
+ entry.trigger = irq_trigger(idx);
+ entry.polarity = irq_polarity(idx);
+
+ if (irq_trigger(idx)) {
+ entry.trigger = 1;
+ entry.mask = 1;
+ }
+
+ irq = pin_2_irq(idx, apic, pin);
+ /*
+ * skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum
+ */
+ if (multi_timer_check(apic, irq))
+ continue;
+ else
+ add_pin_to_irq(irq, apic, pin);
+
+ if (!apic && !IO_APIC_IRQ(irq))
+ continue;
+
+ if (IO_APIC_IRQ(irq)) {
+ vector = assign_irq_vector(irq);
+ entry.vector = vector;
+ ioapic_register_intr(irq, vector, IOAPIC_AUTO);
+
+ if (!apic && (irq < 16))
+ disable_8259A_irq(irq);
+ }
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+ }
+
+ if (!first_notcon)
+ apic_printk(APIC_VERBOSE, " not connected.\n");
+}
+
+/*
+ * Set up the 8259A-master output pin:
+ */
+static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+{
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry,0,sizeof(entry));
+
+ disable_8259A_irq(0);
+
+ /* mask LVT0 */
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+
+ /*
+ * We use logical delivery to get the timer IRQ
+ * to the first CPU.
+ */
+ entry.dest_mode = INT_DEST_MODE;
+ entry.mask = 0; /* unmask IRQ now */
+ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.polarity = 0;
+ entry.trigger = 0;
+ entry.vector = vector;
+
+ /*
+ * The timer IRQ doesn't have to know that behind the
+ * scene we have a 8259A-master in AEOI mode ...
+ */
+ irq_desc[0].handler = &ioapic_edge_type;
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ enable_8259A_irq(0);
+}
+
+static inline void UNEXPECTED_IO_APIC(void)
+{
+}
+
+void __init print_IO_APIC(void)
+{
+ int apic, i;
+ union IO_APIC_reg_00 reg_00;
+ union IO_APIC_reg_01 reg_01;
+ union IO_APIC_reg_02 reg_02;
+ union IO_APIC_reg_03 reg_03;
+ unsigned long flags;
+
+ if (apic_verbosity == APIC_QUIET)
+ return;
+
+ printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+ for (i = 0; i < nr_ioapics; i++)
+ printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+ mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+
+ /*
+ * We are a bit conservative about what we expect. We have to
+ * know about every hardware change ASAP.
+ */
+ printk(KERN_INFO "testing the IO APIC.......................\n");
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ reg_01.raw = io_apic_read(apic, 1);
+ if (reg_01.bits.version >= 0x10)
+ reg_02.raw = io_apic_read(apic, 2);
+ if (reg_01.bits.version >= 0x20)
+ reg_03.raw = io_apic_read(apic, 3);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+ printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
+ printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
+ printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
+ printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS);
+ if (reg_00.bits.ID >= get_physical_broadcast())
+ UNEXPECTED_IO_APIC();
+ if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+
+ printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
+ printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
+ if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
+ (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
+ (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
+ (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
+ (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
+ (reg_01.bits.entries != 0x2E) &&
+ (reg_01.bits.entries != 0x3F)
+ )
+ UNEXPECTED_IO_APIC();
+
+ printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
+ printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
+ if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
+ (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
+ (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
+ (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
+ (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */
+ )
+ UNEXPECTED_IO_APIC();
+ if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+
+ /*
+ * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
+ * but the value of reg_02 is read as the previous read register
+ * value, so ignore it if reg_02 == reg_01.
+ */
+ if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
+ printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
+ printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
+ if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
+ UNEXPECTED_IO_APIC();
+ }
+
+ /*
+ * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
+ * or reg_03, but the value of reg_0[23] is read as the previous read
+ * register value, so ignore it if reg_03 == reg_0[12].
+ */
+ if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
+ reg_03.raw != reg_01.raw) {
+ printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
+ printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT);
+ if (reg_03.bits.__reserved_1)
+ UNEXPECTED_IO_APIC();
+ }
+
+ printk(KERN_DEBUG ".... IRQ redirection table:\n");
+
+ printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
+ " Stat Dest Deli Vect: \n");
+
+ for (i = 0; i <= reg_01.bits.entries; i++) {
+ struct IO_APIC_route_entry entry;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
+ *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ printk(KERN_DEBUG " %02x %03X %02X ",
+ i,
+ entry.dest.logical.logical_dest,
+ entry.dest.physical.physical_dest
+ );
+
+ printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
+ entry.mask,
+ entry.trigger,
+ entry.irr,
+ entry.polarity,
+ entry.delivery_status,
+ entry.dest_mode,
+ entry.delivery_mode,
+ entry.vector
+ );
+ }
+ }
+ if (use_pci_vector())
+ printk(KERN_INFO "Using vector-based indexing\n");
+ printk(KERN_DEBUG "IRQ to pin mappings:\n");
+ for (i = 0; i < NR_IRQS; i++) {
+ struct irq_pin_list *entry = irq_2_pin + i;
+ if (entry->pin < 0)
+ continue;
+ if (use_pci_vector() && !platform_legacy_irq(i))
+ printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
+ else
+ printk(KERN_DEBUG "IRQ%d ", i);
+ for (;;) {
+ printk("-> %d:%d", entry->apic, entry->pin);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+ printk("\n");
+ }
+
+ printk(KERN_INFO ".................................... done.\n");
+
+ return;
+}
+
+#if 0
+
+static void print_APIC_bitfield (int base)
+{
+ unsigned int v;
+ int i, j;
+
+ if (apic_verbosity == APIC_QUIET)
+ return;
+
+ printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
+ for (i = 0; i < 8; i++) {
+ v = apic_read(base + i*0x10);
+ for (j = 0; j < 32; j++) {
+ if (v & (1<<j))
+ printk("1");
+ else
+ printk("0");
+ }
+ printk("\n");
+ }
+}
+
+void /*__init*/ print_local_APIC(void * dummy)
+{
+ unsigned int v, ver, maxlvt;
+
+ if (apic_verbosity == APIC_QUIET)
+ return;
+
+ printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+ smp_processor_id(), hard_smp_processor_id());
+ v = apic_read(APIC_ID);
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
+ v = apic_read(APIC_LVR);
+ printk(KERN_INFO "... APIC VERSION: %08x\n", v);
+ ver = GET_APIC_VERSION(v);
+ maxlvt = get_maxlvt();
+
+ v = apic_read(APIC_TASKPRI);
+ printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
+
+ if (APIC_INTEGRATED(ver)) { /* !82489DX */
+ v = apic_read(APIC_ARBPRI);
+ printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+ v & APIC_ARBPRI_MASK);
+ v = apic_read(APIC_PROCPRI);
+ printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
+ }
+
+ v = apic_read(APIC_EOI);
+ printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
+ v = apic_read(APIC_RRR);
+ printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
+ v = apic_read(APIC_LDR);
+ printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
+ v = apic_read(APIC_DFR);
+ printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
+ v = apic_read(APIC_SPIV);
+ printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
+
+ printk(KERN_DEBUG "... APIC ISR field:\n");
+ print_APIC_bitfield(APIC_ISR);
+ printk(KERN_DEBUG "... APIC TMR field:\n");
+ print_APIC_bitfield(APIC_TMR);
+ printk(KERN_DEBUG "... APIC IRR field:\n");
+ print_APIC_bitfield(APIC_IRR);
+
+ if (APIC_INTEGRATED(ver)) { /* !82489DX */
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ v = apic_read(APIC_ESR);
+ printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
+ }
+
+ v = apic_read(APIC_ICR);
+ printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
+ v = apic_read(APIC_ICR2);
+ printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+
+ v = apic_read(APIC_LVTT);
+ printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
+
+ if (maxlvt > 3) { /* PC is LVT#4. */
+ v = apic_read(APIC_LVTPC);
+ printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
+ }
+ v = apic_read(APIC_LVT0);
+ printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
+ v = apic_read(APIC_LVT1);
+ printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
+
+ if (maxlvt > 2) { /* ERR is LVT#3. */
+ v = apic_read(APIC_LVTERR);
+ printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
+ }
+
+ v = apic_read(APIC_TMICT);
+ printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
+ v = apic_read(APIC_TMCCT);
+ printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
+ v = apic_read(APIC_TDCR);
+ printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+ printk("\n");
+}
+
+void print_all_local_APICs (void)
+{
+ on_each_cpu(print_local_APIC, NULL, 1, 1);
+}
+
+void /*__init*/ print_PIC(void)
+{
+ extern spinlock_t i8259A_lock;
+ unsigned int v;
+ unsigned long flags;
+
+ if (apic_verbosity == APIC_QUIET)
+ return;
+
+ printk(KERN_DEBUG "\nprinting PIC contents\n");
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ v = inb(0xa1) << 8 | inb(0x21);
+ printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
+
+ v = inb(0xa0) << 8 | inb(0x20);
+ printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
+
+ outb(0x0b,0xa0);
+ outb(0x0b,0x20);
+ v = inb(0xa0) << 8 | inb(0x20);
+ outb(0x0a,0xa0);
+ outb(0x0a,0x20);
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
+
+ v = inb(0x4d1) << 8 | inb(0x4d0);
+ printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
+}
+
+#endif /* 0 */
+
+static void __init enable_IO_APIC(void)
+{
+ union IO_APIC_reg_01 reg_01;
+ int i;
+ unsigned long flags;
+
+ for (i = 0; i < PIN_MAP_SIZE; i++) {
+ irq_2_pin[i].pin = -1;
+ irq_2_pin[i].next = 0;
+ }
+ if (!pirqs_enabled)
+ for (i = 0; i < MAX_PIRQS; i++)
+ pirq_entries[i] = -1;
+
+ /*
+ * The number of IO-APIC IRQ registers (== #pins):
+ */
+ for (i = 0; i < nr_ioapics; i++) {
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_01.raw = io_apic_read(i, 1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ nr_ioapic_registers[i] = reg_01.bits.entries+1;
+ }
+
+ /*
+ * Do not trust the IO-APIC being empty at bootup
+ */
+ clear_IO_APIC();
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
+ /*
+ * Clear the IO-APIC before rebooting:
+ */
+ clear_IO_APIC();
+
+ disconnect_bsp_APIC();
+}
+
+/*
+ * function to set the IO-APIC physical IDs based on the
+ * values stored in the MPC table.
+ *
+ * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
+ */
+
+#ifndef CONFIG_X86_NUMAQ
+static void __init setup_ioapic_ids_from_mpc(void)
+{
+ union IO_APIC_reg_00 reg_00;
+ physid_mask_t phys_id_present_map;
+ int apic;
+ int i;
+ unsigned char old_id;
+ unsigned long flags;
+
+ /*
+ * This is broken; anything with a real cpu count has to
+ * circumvent this idiocy regardless.
+ */
+ phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+ /*
+ * Set the IOAPIC ID to the value stored in the MPC table.
+ */
+ for (apic = 0; apic < nr_ioapics; apic++) {
+
+ /* Read the register 0 value */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ old_id = mp_ioapics[apic].mpc_apicid;
+
+ if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+ printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
+ apic, mp_ioapics[apic].mpc_apicid);
+ printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+ reg_00.bits.ID);
+ mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+ }
+
+ /* Don't check I/O APIC IDs for some xAPIC systems. They have
+ * no meaning without the serial APIC bus. */
+ if (NO_IOAPIC_CHECK)
+ continue;
+ /*
+ * Sanity check, is the ID really free? Every APIC in a
+ * system must have a unique ID or we get lots of nice
+ * 'stuck on smp_invalidate_needed IPI wait' messages.
+ */
+ if (check_apicid_used(phys_id_present_map,
+ mp_ioapics[apic].mpc_apicid)) {
+ printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
+ apic, mp_ioapics[apic].mpc_apicid);
+ for (i = 0; i < get_physical_broadcast(); i++)
+ if (!physid_isset(i, phys_id_present_map))
+ break;
+ if (i >= get_physical_broadcast())
+ panic("Max APIC ID exceeded!\n");
+ printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+ i);
+ physid_set(i, phys_id_present_map);
+ mp_ioapics[apic].mpc_apicid = i;
+ } else {
+ physid_mask_t tmp;
+ tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+ apic_printk(APIC_VERBOSE, "Setting %d in the "
+ "phys_id_present_map\n",
+ mp_ioapics[apic].mpc_apicid);
+ physids_or(phys_id_present_map, phys_id_present_map, tmp);
+ }
+
+
+ /*
+ * We need to adjust the IRQ routing table
+ * if the ID changed.
+ */
+ if (old_id != mp_ioapics[apic].mpc_apicid)
+ for (i = 0; i < mp_irq_entries; i++)
+ if (mp_irqs[i].mpc_dstapic == old_id)
+ mp_irqs[i].mpc_dstapic
+ = mp_ioapics[apic].mpc_apicid;
+
+ /*
+ * Read the right value from the MPC table and
+ * write it into the ID register.
+ */
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "...changing IO-APIC physical APIC ID to %d ...",
+ mp_ioapics[apic].mpc_apicid);
+
+ reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0, reg_00.raw);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ /*
+ * Sanity check
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(apic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+ printk("could not set ID!\n");
+ else
+ apic_printk(APIC_VERBOSE, " ok.\n");
+ }
+}
+#else
+static void __init setup_ioapic_ids_from_mpc(void) { }
+#endif
+
+/*
+ * There is a nasty bug in some older SMP boards, their mptable lies
+ * about the timer IRQ. We do the following to work around the situation:
+ *
+ * - timer IRQ defaults to IO-APIC IRQ
+ * - if this function detects that timer IRQs are defunct, then we fall
+ * back to ISA timer IRQs
+ */
+static int __init timer_irq_works(void)
+{
+ unsigned long t1 = jiffies;
+
+ local_irq_enable();
+ /* Let ten ticks pass... */
+ mdelay((10 * 1000) / HZ);
+
+ /*
+ * Expect a few ticks at least, to be sure some possible
+ * glue logic does not lock up after one or two first
+ * ticks in a non-ExtINT mode. Also the local APIC
+ * might have cached one ExtINT interrupt. Finally, at
+ * least one tick may be lost due to delays.
+ */
+ if (jiffies - t1 > 4)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * In the SMP+IOAPIC case it might happen that there are an unspecified
+ * number of pending IRQ events unhandled. These cases are very rare,
+ * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
+ * better to do it this way as thus we do not have to be aware of
+ * 'pending' interrupts in the IRQ path, except at this point.
+ */
+/*
+ * Edge triggered needs to resend any interrupt
+ * that was delayed but this is now handled in the device
+ * independent code.
+ */
+
+/*
+ * Starting up a edge-triggered IO-APIC interrupt is
+ * nasty - we need to make sure that we get the edge.
+ * If it is already asserted for some reason, we need
+ * return 1 to indicate that is was pending.
+ *
+ * This is not complete - we should be able to fake
+ * an edge even if it isn't on the 8259A...
+ */
+static unsigned int startup_edge_ioapic_irq(unsigned int irq)
+{
+ int was_pending = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ if (irq < 16) {
+ disable_8259A_irq(irq);
+ if (i8259A_irq_pending(irq))
+ was_pending = 1;
+ }
+ __unmask_IO_APIC_irq(irq);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return was_pending;
+}
+
+/*
+ * Once we have recorded IRQ_PENDING already, we can mask the
+ * interrupt for real. This prevents IRQ storms from unhandled
+ * devices.
+ */
+static void ack_edge_ioapic_irq(unsigned int irq)
+{
+ move_irq(irq);
+ if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
+ == (IRQ_PENDING | IRQ_DISABLED))
+ mask_IO_APIC_irq(irq);
+ ack_APIC_irq();
+}
+
+/*
+ * Level triggered interrupts can just be masked,
+ * and shutting down and starting up the interrupt
+ * is the same as enabling and disabling them -- except
+ * with a startup need to return a "was pending" value.
+ *
+ * Level triggered interrupts are special because we
+ * do not touch any IO-APIC register while handling
+ * them. We ack the APIC in the end-IRQ handler, not
+ * in the start-IRQ-handler. Protection against reentrance
+ * from the same interrupt is still provided, both by the
+ * generic IRQ layer and by the fact that an unacked local
+ * APIC does not accept IRQs.
+ */
+static unsigned int startup_level_ioapic_irq (unsigned int irq)
+{
+ unmask_IO_APIC_irq(irq);
+
+ return 0; /* don't check for pending */
+}
+
+static void end_level_ioapic_irq (unsigned int irq)
+{
+ unsigned long v;
+ int i;
+
+ move_irq(irq);
+/*
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets). Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless. As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source. The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually. We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt. We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul. --macro
+ */
+ i = IO_APIC_VECTOR(irq);
+
+ v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+
+ ack_APIC_irq();
+
+ if (!(v & (1 << (i & 0x1f)))) {
+ atomic_inc(&irq_mis_count);
+ spin_lock(&ioapic_lock);
+ __mask_and_edge_IO_APIC_irq(irq);
+ __unmask_and_level_IO_APIC_irq(irq);
+ spin_unlock(&ioapic_lock);
+ }
+}
+
+#ifdef CONFIG_PCI_MSI
+static unsigned int startup_edge_ioapic_vector(unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ return startup_edge_ioapic_irq(irq);
+}
+
+static void ack_edge_ioapic_vector(unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ ack_edge_ioapic_irq(irq);
+}
+
+static unsigned int startup_level_ioapic_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ return startup_level_ioapic_irq (irq);
+}
+
+static void end_level_ioapic_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ end_level_ioapic_irq(irq);
+}
+
+static void mask_IO_APIC_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ mask_IO_APIC_irq(irq);
+}
+
+static void unmask_IO_APIC_vector (unsigned int vector)
+{
+ int irq = vector_to_irq(vector);
+
+ unmask_IO_APIC_irq(irq);
+}
+
+static void set_ioapic_affinity_vector (unsigned int vector,
+ cpumask_t cpu_mask)
+{
+ int irq = vector_to_irq(vector);
+
+ set_ioapic_affinity_irq(irq, cpu_mask);
+}
+#endif
+
+/*
+ * Level and edge triggered IO-APIC interrupts need different handling,
+ * so we use two separate IRQ descriptors. Edge triggered IRQs can be
+ * handled with the level-triggered descriptor, but that one has slightly
+ * more overhead. Level-triggered interrupts cannot be handled with the
+ * edge-triggered handler, without risking IRQ storms and other ugly
+ * races.
+ */
+static struct hw_interrupt_type ioapic_edge_type = {
+ .typename = "IO-APIC-edge",
+ .startup = startup_edge_ioapic,
+ .shutdown = shutdown_edge_ioapic,
+ .enable = enable_edge_ioapic,
+ .disable = disable_edge_ioapic,
+ .ack = ack_edge_ioapic,
+ .end = end_edge_ioapic,
+ .set_affinity = set_ioapic_affinity,
+};
+
+static struct hw_interrupt_type ioapic_level_type = {
+ .typename = "IO-APIC-level",
+ .startup = startup_level_ioapic,
+ .shutdown = shutdown_level_ioapic,
+ .enable = enable_level_ioapic,
+ .disable = disable_level_ioapic,
+ .ack = mask_and_ack_level_ioapic,
+ .end = end_level_ioapic,
+ .set_affinity = set_ioapic_affinity,
+};
+
+static inline void init_IO_APIC_traps(void)
+{
+ int irq;
+
+ /*
+ * NOTE! The local APIC isn't very good at handling
+ * multiple interrupts at the same interrupt level.
+ * As the interrupt level is determined by taking the
+ * vector number and shifting that right by 4, we
+ * want to spread these out a bit so that they don't
+ * all fall in the same interrupt level.
+ *
+ * Also, we've got to be careful not to trash gate
+ * 0x80, because int 0x80 is hm, kind of importantish. ;)
+ */
+ for (irq = 0; irq < NR_IRQS ; irq++) {
+ int tmp = irq;
+ if (use_pci_vector()) {
+ if (!platform_legacy_irq(tmp))
+ if ((tmp = vector_to_irq(tmp)) == -1)
+ continue;
+ }
+ if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
+ /*
+ * Hmm.. We don't have an entry for this,
+ * so default to an old-fashioned 8259
+ * interrupt if we can..
+ */
+ if (irq < 16)
+ make_8259A_irq(irq);
+ else
+ /* Strange. Oh, well.. */
+ irq_desc[irq].handler = &no_irq_type;
+ }
+ }
+}
+
+static void enable_lapic_irq (unsigned int irq)
+{
+ unsigned long v;
+
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
+
+static void disable_lapic_irq (unsigned int irq)
+{
+ unsigned long v;
+
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+}
+
+static void ack_lapic_irq (unsigned int irq)
+{
+ ack_APIC_irq();
+}
+
+static void end_lapic_irq (unsigned int i) { /* nothing */ }
+
+static struct hw_interrupt_type lapic_irq_type = {
+ .typename = "local-APIC-edge",
+ .startup = NULL, /* startup_irq() not used for IRQ0 */
+ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
+ .enable = enable_lapic_irq,
+ .disable = disable_lapic_irq,
+ .ack = ack_lapic_irq,
+ .end = end_lapic_irq
+};
+
+static void setup_nmi (void)
+{
+ /*
+ * Dirty trick to enable the NMI watchdog ...
+ * We put the 8259A master into AEOI mode and
+ * unmask on all local APICs LVT0 as NMI.
+ *
+ * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
+ * is from Maciej W. Rozycki - so we do not have to EOI from
+ * the NMI handler or the timer interrupt.
+ */
+ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
+
+ on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1);
+
+ apic_printk(APIC_VERBOSE, " done.\n");
+}
+
+/*
+ * This looks a bit hackish but it's about the only one way of sending
+ * a few INTA cycles to 8259As and any associated glue logic. ICR does
+ * not support the ExtINT mode, unfortunately. We need to send these
+ * cycles as some i82489DX-based boards have glue logic that keeps the
+ * 8259A interrupt line asserted until INTA. --macro
+ */
+static inline void unlock_ExtINT_logic(void)
+{
+ int pin, i;
+ struct IO_APIC_route_entry entry0, entry1;
+ unsigned char save_control, save_freq_select;
+ unsigned long flags;
+
+ pin = find_isa_irq_pin(8, mp_INT);
+ if (pin == -1)
+ return;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
+ *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ clear_IO_APIC_pin(0, pin);
+
+ memset(&entry1, 0, sizeof(entry1));
+
+ entry1.dest_mode = 0; /* physical delivery */
+ entry1.mask = 0; /* unmask IRQ now */
+ entry1.dest.physical.physical_dest = hard_smp_processor_id();
+ entry1.delivery_mode = dest_ExtINT;
+ entry1.polarity = entry0.polarity;
+ entry1.trigger = 0;
+ entry1.vector = 0;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+ io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ save_control = CMOS_READ(RTC_CONTROL);
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+ CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
+ RTC_FREQ_SELECT);
+ CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
+
+ i = 100;
+ while (i-- > 0) {
+ mdelay(10);
+ if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
+ i -= 10;
+ }
+
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ clear_IO_APIC_pin(0, pin);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+ io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * This code may look a bit paranoid, but it's supposed to cooperate with
+ * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
+ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
+ * fanatically on his truly buggy board.
+ */
+static inline void check_timer(void)
+{
+ int pin1, pin2;
+ int vector;
+
+ /*
+ * get/set the timer IRQ vector:
+ */
+ disable_8259A_irq(0);
+ vector = assign_irq_vector(0);
+ set_intr_gate(vector, interrupt[0]);
+
+ /*
+ * Subtle, code in do_timer_interrupt() expects an AEOI
+ * mode for the 8259A whenever interrupts are routed
+ * through I/O APICs. Also IRQ0 has to be enabled in
+ * the 8259A which implies the virtual wire has to be
+ * disabled in the local APIC.
+ */
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ init_8259A(1);
+ timer_ack = 1;
+ enable_8259A_irq(0);
+
+ pin1 = find_isa_irq_pin(0, mp_INT);
+ pin2 = find_isa_irq_pin(0, mp_ExtINT);
+
+ printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+
+ if (pin1 != -1) {
+ /*
+ * Ok, does IRQ0 through the IOAPIC work?
+ */
+ unmask_IO_APIC_irq(0);
+ if (timer_irq_works()) {
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ setup_nmi();
+ enable_8259A_irq(0);
+ check_nmi_watchdog();
+ }
+ return;
+ }
+ clear_IO_APIC_pin(0, pin1);
+ printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+ }
+
+ printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
+ if (pin2 != -1) {
+ printk("\n..... (found pin %d) ...", pin2);
+ /*
+ * legacy devices should be connected to IO APIC #0
+ */
+ setup_ExtINT_IRQ0_pin(pin2, vector);
+ if (timer_irq_works()) {
+ printk("works.\n");
+ if (pin1 != -1)
+ replace_pin_at_irq(0, 0, pin1, 0, pin2);
+ else
+ add_pin_to_irq(0, 0, pin2);
+ if (nmi_watchdog == NMI_IO_APIC) {
+ setup_nmi();
+ check_nmi_watchdog();
+ }
+ return;
+ }
+ /*
+ * Cleanup, just in case ...
+ */
+ clear_IO_APIC_pin(0, pin2);
+ }
+ printk(" failed.\n");
+
+ if (nmi_watchdog == NMI_IO_APIC) {
+ printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+ nmi_watchdog = 0;
+ }
+
+ printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+
+ disable_8259A_irq(0);
+ irq_desc[0].handler = &lapic_irq_type;
+ apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ enable_8259A_irq(0);
+
+ if (timer_irq_works()) {
+ printk(" works.\n");
+ return;
+ }
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ printk(" failed.\n");
+
+ printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+
+ timer_ack = 0;
+ init_8259A(0);
+ make_8259A_irq(0);
+ apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+
+ unlock_ExtINT_logic();
+
+ if (timer_irq_works()) {
+ printk(" works.\n");
+ return;
+ }
+ printk(" failed :(.\n");
+ panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
+ "report. Then try booting with the 'noapic' option");
+}
+
+/*
+ *
+ * IRQ's that are handled by the PIC in the MPS IOAPIC case.
+ * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
+ * Linux doesn't really care, as it's not actually used
+ * for any interrupt handling anyway.
+ */
+#define PIC_IRQS (1 << PIC_CASCADE_IR)
+
+void __init setup_IO_APIC(void)
+{
+ enable_IO_APIC();
+
+ if (acpi_ioapic)
+ io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
+ else
+ io_apic_irqs = ~PIC_IRQS;
+
+ printk("ENABLING IO-APIC IRQs\n");
+
+ /*
+ * Set up IO-APIC IRQ routing.
+ */
+ if (!acpi_ioapic)
+ setup_ioapic_ids_from_mpc();
+ sync_Arb_IDs();
+ setup_IO_APIC_irqs();
+ init_IO_APIC_traps();
+ check_timer();
+ if (!acpi_ioapic)
+ print_IO_APIC();
+}
+
+/*
+ * Called after all the initialization is done. If we didnt find any
+ * APIC bugs then we can allow the modify fast path
+ */
+
+static int __init io_apic_bug_finalize(void)
+{
+ if(sis_apic_bug == -1)
+ sis_apic_bug = 0;
+ return 0;
+}
+
+late_initcall(io_apic_bug_finalize);
+
+struct sysfs_ioapic_data {
+ struct sys_device dev;
+ struct IO_APIC_route_entry entry[0];
+};
+static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+
+static int ioapic_suspend(struct sys_device *dev, u32 state)
+{
+ struct IO_APIC_route_entry *entry;
+ struct sysfs_ioapic_data *data;
+ unsigned long flags;
+ int i;
+
+ data = container_of(dev, struct sysfs_ioapic_data, dev);
+ entry = data->entry;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
+ *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
+ *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return 0;
+}
+
+static int ioapic_resume(struct sys_device *dev)
+{
+ struct IO_APIC_route_entry *entry;
+ struct sysfs_ioapic_data *data;
+ unsigned long flags;
+ union IO_APIC_reg_00 reg_00;
+ int i;
+
+ data = container_of(dev, struct sysfs_ioapic_data, dev);
+ entry = data->entry;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(dev->id, 0);
+ if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
+ reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+ io_apic_write(dev->id, 0, reg_00.raw);
+ }
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
+ io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
+ io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return 0;
+}
+
+static struct sysdev_class ioapic_sysdev_class = {
+ set_kset_name("ioapic"),
+ .suspend = ioapic_suspend,
+ .resume = ioapic_resume,
+};
+
+static int __init ioapic_init_sysfs(void)
+{
+ struct sys_device * dev;
+ int i, size, error = 0;
+
+ error = sysdev_class_register(&ioapic_sysdev_class);
+ if (error)
+ return error;
+
+ for (i = 0; i < nr_ioapics; i++ ) {
+ size = sizeof(struct sys_device) + nr_ioapic_registers[i]
+ * sizeof(struct IO_APIC_route_entry);
+ mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
+ if (!mp_ioapic_data[i]) {
+ printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+ continue;
+ }
+ memset(mp_ioapic_data[i], 0, size);
+ dev = &mp_ioapic_data[i]->dev;
+ dev->id = i;
+ dev->cls = &ioapic_sysdev_class;
+ error = sysdev_register(dev);
+ if (error) {
+ kfree(mp_ioapic_data[i]);
+ mp_ioapic_data[i] = NULL;
+ printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+device_initcall(ioapic_init_sysfs);
+
+/* --------------------------------------------------------------------------
+ ACPI-based IOAPIC Configuration
+ -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_BOOT
+
+int __init io_apic_get_unique_id (int ioapic, int apic_id)
+{
+ union IO_APIC_reg_00 reg_00;
+ static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+ physid_mask_t tmp;
+ unsigned long flags;
+ int i = 0;
+
+ /*
+ * The P4 platform supports up to 256 APIC IDs on two separate APIC
+ * buses (one for LAPICs, one for IOAPICs), where predecessors only
+ * supports up to 16 on one shared APIC bus.
+ *
+ * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
+ * advantage of new APIC bus architecture.
+ */
+
+ if (physids_empty(apic_id_map))
+ apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_00.raw = io_apic_read(ioapic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ if (apic_id >= get_physical_broadcast()) {
+ printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
+ "%d\n", ioapic, apic_id, reg_00.bits.ID);
+ apic_id = reg_00.bits.ID;
+ }
+
+ /*
+ * Every APIC in a system must have a unique ID or we get lots of nice
+ * 'stuck on smp_invalidate_needed IPI wait' messages.
+ */
+ if (check_apicid_used(apic_id_map, apic_id)) {
+
+ for (i = 0; i < get_physical_broadcast(); i++) {
+ if (!check_apicid_used(apic_id_map, i))
+ break;
+ }
+
+ if (i == get_physical_broadcast())
+ panic("Max apic_id exceeded!\n");
+
+ printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
+ "trying %d\n", ioapic, apic_id, i);
+
+ apic_id = i;
+ }
+
+ tmp = apicid_to_cpu_present(apic_id);
+ physids_or(apic_id_map, apic_id_map, tmp);
+
+ if (reg_00.bits.ID != apic_id) {
+ reg_00.bits.ID = apic_id;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(ioapic, 0, reg_00.raw);
+ reg_00.raw = io_apic_read(ioapic, 0);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ /* Sanity check */
+ if (reg_00.bits.ID != apic_id)
+ panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+ }
+
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+
+ return apic_id;
+}
+
+
+int __init io_apic_get_version (int ioapic)
+{
+ union IO_APIC_reg_01 reg_01;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_01.raw = io_apic_read(ioapic, 1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return reg_01.bits.version;
+}
+
+
+int __init io_apic_get_redir_entries (int ioapic)
+{
+ union IO_APIC_reg_01 reg_01;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_01.raw = io_apic_read(ioapic, 1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return reg_01.bits.entries;
+}
+
+
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+{
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ if (!IO_APIC_IRQ(irq)) {
+ printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ /*
+ * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
+ * Note that we mask (disable) IRQs now -- these get enabled when the
+ * corresponding device driver registers for this IRQ.
+ */
+
+ memset(&entry,0,sizeof(entry));
+
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.dest_mode = INT_DEST_MODE;
+ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ entry.trigger = edge_level;
+ entry.polarity = active_high_low;
+ entry.mask = 1;
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= 16)
+ add_pin_to_irq(irq, ioapic, pin);
+
+ entry.vector = assign_irq_vector(irq);
+
+ apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
+ "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
+ mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
+ edge_level, active_high_low);
+
+ ioapic_register_intr(irq, entry.vector, edge_level);
+
+ if (!ioapic && (irq < 16))
+ disable_8259A_irq(irq);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return 0;
+}
+
+#endif /*CONFIG_ACPI_BOOT*/
diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c
new file mode 100644
index 0000000..8b25160
--- /dev/null
+++ b/arch/i386/kernel/ioport.c
@@ -0,0 +1,147 @@
+/*
+ * linux/arch/i386/kernel/ioport.c
+ *
+ * This contains the io-permission bitmap code - written by obz, with changes
+ * by Linus.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+
+/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
+static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
+{
+ unsigned long mask;
+ unsigned long *bitmap_base = bitmap + (base / BITS_PER_LONG);
+ unsigned int low_index = base & (BITS_PER_LONG-1);
+ int length = low_index + extent;
+
+ if (low_index != 0) {
+ mask = (~0UL << low_index);
+ if (length < BITS_PER_LONG)
+ mask &= ~(~0UL << length);
+ if (new_value)
+ *bitmap_base++ |= mask;
+ else
+ *bitmap_base++ &= ~mask;
+ length -= BITS_PER_LONG;
+ }
+
+ mask = (new_value ? ~0UL : 0UL);
+ while (length >= BITS_PER_LONG) {
+ *bitmap_base++ = mask;
+ length -= BITS_PER_LONG;
+ }
+
+ if (length > 0) {
+ mask = ~(~0UL << length);
+ if (new_value)
+ *bitmap_base++ |= mask;
+ else
+ *bitmap_base++ &= ~mask;
+ }
+}
+
+
+/*
+ * this changes the io permissions bitmap in the current task.
+ */
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
+{
+ unsigned long i, max_long, bytes, bytes_updated;
+ struct thread_struct * t = ¤t->thread;
+ struct tss_struct * tss;
+ unsigned long *bitmap;
+
+ if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
+ return -EINVAL;
+ if (turn_on && !capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ /*
+ * If it's the first ioperm() call in this thread's lifetime, set the
+ * IO bitmap up. ioperm() is much less timing critical than clone(),
+ * this is why we delay this operation until now:
+ */
+ if (!t->io_bitmap_ptr) {
+ bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+ if (!bitmap)
+ return -ENOMEM;
+
+ memset(bitmap, 0xff, IO_BITMAP_BYTES);
+ t->io_bitmap_ptr = bitmap;
+ }
+
+ /*
+ * do it in the per-thread copy and in the TSS ...
+ *
+ * Disable preemption via get_cpu() - we must not switch away
+ * because the ->io_bitmap_max value must match the bitmap
+ * contents:
+ */
+ tss = &per_cpu(init_tss, get_cpu());
+
+ set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
+
+ /*
+ * Search for a (possibly new) maximum. This is simple and stupid,
+ * to keep it obviously correct:
+ */
+ max_long = 0;
+ for (i = 0; i < IO_BITMAP_LONGS; i++)
+ if (t->io_bitmap_ptr[i] != ~0UL)
+ max_long = i;
+
+ bytes = (max_long + 1) * sizeof(long);
+ bytes_updated = max(bytes, t->io_bitmap_max);
+
+ t->io_bitmap_max = bytes;
+
+ /*
+ * Sets the lazy trigger so that the next I/O operation will
+ * reload the correct bitmap.
+ */
+ tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+
+ put_cpu();
+
+ return 0;
+}
+
+/*
+ * sys_iopl has to be used when you want to access the IO ports
+ * beyond the 0x3ff range: to get the full 65536 ports bitmapped
+ * you'd need 8kB of bitmaps/process, which is a bit excessive.
+ *
+ * Here we just change the eflags value on the stack: we allow
+ * only the super-user to do it. This depends on the stack-layout
+ * on system-call entry - see also fork() and the signal handling
+ * code.
+ */
+
+asmlinkage long sys_iopl(unsigned long unused)
+{
+ volatile struct pt_regs * regs = (struct pt_regs *) &unused;
+ unsigned int level = regs->ebx;
+ unsigned int old = (regs->eflags >> 12) & 3;
+
+ if (level > 3)
+ return -EINVAL;
+ /* Trying to gain more privileges? */
+ if (level > old) {
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ }
+ regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12);
+ /* Make sure we return the long way (not sysenter) */
+ set_thread_flag(TIF_IRET);
+ return 0;
+}
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
new file mode 100644
index 0000000..73945a3
--- /dev/null
+++ b/arch/i386/kernel/irq.c
@@ -0,0 +1,261 @@
+/*
+ * linux/arch/i386/kernel/irq.c
+ *
+ * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the lowest level x86-specific interrupt
+ * entry, irq-stacks and irq statistics code. All the remaining
+ * irq logic is done by the generic kernel/irq/ code and
+ * by the x86-specific irq controller code. (e.g. i8259.c and
+ * io_apic.c.)
+ */
+
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+
+DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp;
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+#ifndef CONFIG_X86_LOCAL_APIC
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+ struct thread_info tinfo;
+ u32 stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS];
+static union irq_ctx *softirq_ctx[NR_CPUS];
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+fastcall unsigned int do_IRQ(struct pt_regs *regs)
+{
+ /* high bits used in ret_from_ code */
+ int irq = regs->orig_eax & 0xff;
+#ifdef CONFIG_4KSTACKS
+ union irq_ctx *curctx, *irqctx;
+ u32 *isp;
+#endif
+
+ irq_enter();
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ /* Debugging check for stack overflow: is there less than 1KB free? */
+ {
+ long esp;
+
+ __asm__ __volatile__("andl %%esp,%0" :
+ "=r" (esp) : "0" (THREAD_SIZE - 1));
+ if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
+ printk("do_IRQ: stack overflow: %ld\n",
+ esp - sizeof(struct thread_info));
+ dump_stack();
+ }
+ }
+#endif
+
+#ifdef CONFIG_4KSTACKS
+
+ curctx = (union irq_ctx *) current_thread_info();
+ irqctx = hardirq_ctx[smp_processor_id()];
+
+ /*
+ * this is where we switch to the IRQ stack. However, if we are
+ * already using the IRQ stack (because we interrupted a hardirq
+ * handler) we can't do that and just have to keep using the
+ * current stack (which is the irq stack already after all)
+ */
+ if (curctx != irqctx) {
+ int arg1, arg2, ebx;
+
+ /* build the stack frame on the IRQ stack */
+ isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+ irqctx->tinfo.task = curctx->tinfo.task;
+ irqctx->tinfo.previous_esp = current_stack_pointer;
+
+ asm volatile(
+ " xchgl %%ebx,%%esp \n"
+ " call __do_IRQ \n"
+ " movl %%ebx,%%esp \n"
+ : "=a" (arg1), "=d" (arg2), "=b" (ebx)
+ : "0" (irq), "1" (regs), "2" (isp)
+ : "memory", "cc", "ecx"
+ );
+ } else
+#endif
+ __do_IRQ(irq, regs);
+
+ irq_exit();
+
+ return 1;
+}
+
+#ifdef CONFIG_4KSTACKS
+
+/*
+ * These should really be __section__(".bss.page_aligned") as well, but
+ * gcc's 3.0 and earlier don't handle that correctly.
+ */
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+ union irq_ctx *irqctx;
+
+ if (hardirq_ctx[cpu])
+ return;
+
+ irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ hardirq_ctx[cpu] = irqctx;
+
+ irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ softirq_ctx[cpu] = irqctx;
+
+ printk("CPU %u irqstacks, hard=%p soft=%p\n",
+ cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ unsigned long flags;
+ struct thread_info *curctx;
+ union irq_ctx *irqctx;
+ u32 *isp;
+
+ if (in_interrupt())
+ return;
+
+ local_irq_save(flags);
+
+ if (local_softirq_pending()) {
+ curctx = current_thread_info();
+ irqctx = softirq_ctx[smp_processor_id()];
+ irqctx->tinfo.task = curctx->task;
+ irqctx->tinfo.previous_esp = current_stack_pointer;
+
+ /* build the stack frame on the softirq stack */
+ isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+
+ asm volatile(
+ " xchgl %%ebx,%%esp \n"
+ " call __do_softirq \n"
+ " movl %%ebx,%%esp \n"
+ : "=b"(isp)
+ : "0"(isp)
+ : "memory", "cc", "edx", "ecx", "eax"
+ );
+ }
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(do_softirq);
+#endif
+
+/*
+ * Interrupt statistics:
+ */
+
+atomic_t irq_err_count;
+
+/*
+ * /proc/interrupts printing:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction * action;
+ unsigned long flags;
+
+ if (i == 0) {
+ seq_printf(p, " ");
+ for (j=0; j<NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%d ",j);
+ seq_putc(p, '\n');
+ }
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto skip;
+ seq_printf(p, "%3d: ",i);
+#ifndef CONFIG_SMP
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+ seq_printf(p, " %14s", irq_desc[i].handler->typename);
+ seq_printf(p, " %s", action->name);
+
+ for (action=action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+skip:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "NMI: ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ", nmi_count(j));
+ seq_putc(p, '\n');
+#ifdef CONFIG_X86_LOCAL_APIC
+ seq_printf(p, "LOC: ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ",
+ per_cpu(irq_stat,j).apic_timer_irqs);
+ seq_putc(p, '\n');
+#endif
+ seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+#if defined(CONFIG_X86_IO_APIC)
+ seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+#endif
+ }
+ return 0;
+}
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
new file mode 100644
index 0000000..6716816
--- /dev/null
+++ b/arch/i386/kernel/kprobes.c
@@ -0,0 +1,385 @@
+/*
+ * Kernel Probes (KProbes)
+ * arch/i386/kernel/kprobes.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ * Probes initial implementation ( includes contributions from
+ * Rusty Russell).
+ * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
+ * interface to access function arguments.
+ */
+
+#include <linux/config.h>
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <asm/kdebug.h>
+#include <asm/desc.h>
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE 0x00000001
+#define KPROBE_HIT_SS 0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags;
+static struct pt_regs jprobe_saved_regs;
+static long *jprobe_saved_esp;
+/* copy of the kernel stack at the probe fire time */
+static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+void jprobe_return_end(void);
+
+/*
+ * returns non-zero if opcode modifies the interrupt flag.
+ */
+static inline int is_IF_modifier(kprobe_opcode_t opcode)
+{
+ switch (opcode) {
+ case 0xfa: /* cli */
+ case 0xfb: /* sti */
+ case 0xcf: /* iret/iretd */
+ case 0x9d: /* popf/popfd */
+ return 1;
+ }
+ return 0;
+}
+
+int arch_prepare_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+
+void arch_copy_kprobe(struct kprobe *p)
+{
+ memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+ *p->addr = p->opcode;
+ regs->eip = (unsigned long)p->addr;
+}
+
+static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->eflags |= TF_MASK;
+ regs->eflags &= ~IF_MASK;
+ /*single step inline if the instruction is an int3*/
+ if (p->opcode == BREAKPOINT_INSTRUCTION)
+ regs->eip = (unsigned long)p->addr;
+ else
+ regs->eip = (unsigned long)&p->ainsn.insn;
+}
+
+/*
+ * Interrupts are disabled on entry as trap3 is an interrupt gate and they
+ * remain disabled thorough out this function.
+ */
+static int kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p;
+ int ret = 0;
+ kprobe_opcode_t *addr = NULL;
+ unsigned long *lp;
+
+ /* We're in an interrupt, but this is clear and BUG()-safe. */
+ preempt_disable();
+ /* Check if the application is using LDT entry for its code segment and
+ * calculate the address by reading the base address from the LDT entry.
+ */
+ if ((regs->xcs & 4) && (current->mm)) {
+ lp = (unsigned long *) ((unsigned long)((regs->xcs >> 3) * 8)
+ + (char *) current->mm->context.ldt);
+ addr = (kprobe_opcode_t *) (get_desc_base(lp) + regs->eip -
+ sizeof(kprobe_opcode_t));
+ } else {
+ addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t));
+ }
+ /* Check we're not actually recursing */
+ if (kprobe_running()) {
+ /* We *are* holding lock here, so this is safe.
+ Disarm the probe we just hit, and ignore it. */
+ p = get_kprobe(addr);
+ if (p) {
+ if (kprobe_status == KPROBE_HIT_SS) {
+ regs->eflags &= ~TF_MASK;
+ regs->eflags |= kprobe_saved_eflags;
+ unlock_kprobes();
+ goto no_kprobe;
+ }
+ disarm_kprobe(p, regs);
+ ret = 1;
+ } else {
+ p = current_kprobe;
+ if (p->break_handler && p->break_handler(p, regs)) {
+ goto ss_probe;
+ }
+ }
+ /* If it's not ours, can't be delete race, (we hold lock). */
+ goto no_kprobe;
+ }
+
+ lock_kprobes();
+ p = get_kprobe(addr);
+ if (!p) {
+ unlock_kprobes();
+ if (regs->eflags & VM_MASK) {
+ /* We are in virtual-8086 mode. Return 0 */
+ goto no_kprobe;
+ }
+
+ if (*addr != BREAKPOINT_INSTRUCTION) {
+ /*
+ * The breakpoint instruction was removed right
+ * after we hit it. Another cpu has removed
+ * either a probepoint or a debugger breakpoint
+ * at this address. In either case, no further
+ * handling of this interrupt is appropriate.
+ */
+ ret = 1;
+ }
+ /* Not one of ours: let kernel handle it */
+ goto no_kprobe;
+ }
+
+ kprobe_status = KPROBE_HIT_ACTIVE;
+ current_kprobe = p;
+ kprobe_saved_eflags = kprobe_old_eflags
+ = (regs->eflags & (TF_MASK | IF_MASK));
+ if (is_IF_modifier(p->opcode))
+ kprobe_saved_eflags &= ~IF_MASK;
+
+ if (p->pre_handler && p->pre_handler(p, regs))
+ /* handler has already set things up, so skip ss setup */
+ return 1;
+
+ss_probe:
+ prepare_singlestep(p, regs);
+ kprobe_status = KPROBE_HIT_SS;
+ return 1;
+
+no_kprobe:
+ preempt_enable_no_resched();
+ return ret;
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "int 3"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * interrupt. We have to fix up the stack as follows:
+ *
+ * 0) Except in the case of absolute or indirect jump or call instructions,
+ * the new eip is relative to the copied instruction. We need to make
+ * it relative to the original instruction.
+ *
+ * 1) If the single-stepped instruction was pushfl, then the TF and IF
+ * flags are set in the just-pushed eflags, and may need to be cleared.
+ *
+ * 2) If the single-stepped instruction was a call, the return address
+ * that is atop the stack is the address following the copied instruction.
+ * We need to make it the address following the original instruction.
+ */
+static void resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long *tos = (unsigned long *)®s->esp;
+ unsigned long next_eip = 0;
+ unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+ unsigned long orig_eip = (unsigned long)p->addr;
+
+ switch (p->ainsn.insn[0]) {
+ case 0x9c: /* pushfl */
+ *tos &= ~(TF_MASK | IF_MASK);
+ *tos |= kprobe_old_eflags;
+ break;
+ case 0xe8: /* call relative - Fix return addr */
+ *tos = orig_eip + (*tos - copy_eip);
+ break;
+ case 0xff:
+ if ((p->ainsn.insn[1] & 0x30) == 0x10) {
+ /* call absolute, indirect */
+ /* Fix return addr; eip is correct. */
+ next_eip = regs->eip;
+ *tos = orig_eip + (*tos - copy_eip);
+ } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */
+ ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */
+ /* eip is correct. */
+ next_eip = regs->eip;
+ }
+ break;
+ case 0xea: /* jmp absolute -- eip is correct */
+ next_eip = regs->eip;
+ break;
+ default:
+ break;
+ }
+
+ regs->eflags &= ~TF_MASK;
+ if (next_eip) {
+ regs->eip = next_eip;
+ } else {
+ regs->eip = orig_eip + (regs->eip - copy_eip);
+ }
+}
+
+/*
+ * Interrupts are disabled on entry as trap1 is an interrupt gate and they
+ * remain disabled thoroughout this function. And we hold kprobe lock.
+ */
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+ if (!kprobe_running())
+ return 0;
+
+ if (current_kprobe->post_handler)
+ current_kprobe->post_handler(current_kprobe, regs, 0);
+
+ resume_execution(current_kprobe, regs);
+ regs->eflags |= kprobe_saved_eflags;
+
+ unlock_kprobes();
+ preempt_enable_no_resched();
+
+ /*
+ * if somebody else is singlestepping across a probe point, eflags
+ * will have TF set, in which case, continue the remaining processing
+ * of do_debug, as if this is not a probe hit.
+ */
+ if (regs->eflags & TF_MASK)
+ return 0;
+
+ return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ if (current_kprobe->fault_handler
+ && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ return 1;
+
+ if (kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(current_kprobe, regs);
+ regs->eflags |= kprobe_old_eflags;
+
+ unlock_kprobes();
+ preempt_enable_no_resched();
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
+ void *data)
+{
+ struct die_args *args = (struct die_args *)data;
+ switch (val) {
+ case DIE_INT3:
+ if (kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ break;
+ case DIE_DEBUG:
+ if (post_kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ break;
+ case DIE_GPF:
+ if (kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ return NOTIFY_STOP;
+ break;
+ case DIE_PAGE_FAULT:
+ if (kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ return NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ unsigned long addr;
+
+ jprobe_saved_regs = *regs;
+ jprobe_saved_esp = ®s->esp;
+ addr = (unsigned long)jprobe_saved_esp;
+
+ /*
+ * TBD: As Linus pointed out, gcc assumes that the callee
+ * owns the argument space and could overwrite it, e.g.
+ * tailcall optimization. So, to be absolutely safe
+ * we also save and restore enough stack bytes to cover
+ * the argument area.
+ */
+ memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
+ regs->eflags &= ~IF_MASK;
+ regs->eip = (unsigned long)(jp->entry);
+ return 1;
+}
+
+void jprobe_return(void)
+{
+ preempt_enable_no_resched();
+ asm volatile (" xchgl %%ebx,%%esp \n"
+ " int3 \n"
+ " .globl jprobe_return_end \n"
+ " jprobe_return_end: \n"
+ " nop \n"::"b"
+ (jprobe_saved_esp):"memory");
+}
+
+int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ u8 *addr = (u8 *) (regs->eip - 1);
+ unsigned long stack_addr = (unsigned long)jprobe_saved_esp;
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
+ if (®s->esp != jprobe_saved_esp) {
+ struct pt_regs *saved_regs =
+ container_of(jprobe_saved_esp, struct pt_regs, esp);
+ printk("current esp %p does not match saved esp %p\n",
+ ®s->esp, jprobe_saved_esp);
+ printk("Saved registers for jprobe %p\n", jp);
+ show_registers(saved_regs);
+ printk("Current registers\n");
+ show_registers(regs);
+ BUG();
+ }
+ *regs = jprobe_saved_regs;
+ memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
+ MIN_STACK_SIZE(stack_addr));
+ return 1;
+ }
+ return 0;
+}
diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c
new file mode 100644
index 0000000..bb50afb
--- /dev/null
+++ b/arch/i386/kernel/ldt.c
@@ -0,0 +1,255 @@
+/*
+ * linux/kernel/ldt.c
+ *
+ * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/ldt.h>
+#include <asm/desc.h>
+
+#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
+static void flush_ldt(void *null)
+{
+ if (current->active_mm)
+ load_LDT(¤t->active_mm->context);
+}
+#endif
+
+static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
+{
+ void *oldldt;
+ void *newldt;
+ int oldsize;
+
+ if (mincount <= pc->size)
+ return 0;
+ oldsize = pc->size;
+ mincount = (mincount+511)&(~511);
+ if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE)
+ newldt = vmalloc(mincount*LDT_ENTRY_SIZE);
+ else
+ newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL);
+
+ if (!newldt)
+ return -ENOMEM;
+
+ if (oldsize)
+ memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE);
+ oldldt = pc->ldt;
+ memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE);
+ pc->ldt = newldt;
+ wmb();
+ pc->size = mincount;
+ wmb();
+
+ if (reload) {
+#ifdef CONFIG_SMP
+ cpumask_t mask;
+ preempt_disable();
+ load_LDT(pc);
+ mask = cpumask_of_cpu(smp_processor_id());
+ if (!cpus_equal(current->mm->cpu_vm_mask, mask))
+ smp_call_function(flush_ldt, NULL, 1, 1);
+ preempt_enable();
+#else
+ load_LDT(pc);
+#endif
+ }
+ if (oldsize) {
+ if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE)
+ vfree(oldldt);
+ else
+ kfree(oldldt);
+ }
+ return 0;
+}
+
+static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
+{
+ int err = alloc_ldt(new, old->size, 0);
+ if (err < 0)
+ return err;
+ memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE);
+ return 0;
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ struct mm_struct * old_mm;
+ int retval = 0;
+
+ init_MUTEX(&mm->context.sem);
+ mm->context.size = 0;
+ old_mm = current->mm;
+ if (old_mm && old_mm->context.size > 0) {
+ down(&old_mm->context.sem);
+ retval = copy_ldt(&mm->context, &old_mm->context);
+ up(&old_mm->context.sem);
+ }
+ return retval;
+}
+
+/*
+ * No need to lock the MM as we are the last user
+ */
+void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context.size) {
+ if (mm == current->active_mm)
+ clear_LDT();
+ if (mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE)
+ vfree(mm->context.ldt);
+ else
+ kfree(mm->context.ldt);
+ mm->context.size = 0;
+ }
+}
+
+static int read_ldt(void __user * ptr, unsigned long bytecount)
+{
+ int err;
+ unsigned long size;
+ struct mm_struct * mm = current->mm;
+
+ if (!mm->context.size)
+ return 0;
+ if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+ bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
+
+ down(&mm->context.sem);
+ size = mm->context.size*LDT_ENTRY_SIZE;
+ if (size > bytecount)
+ size = bytecount;
+
+ err = 0;
+ if (copy_to_user(ptr, mm->context.ldt, size))
+ err = -EFAULT;
+ up(&mm->context.sem);
+ if (err < 0)
+ goto error_return;
+ if (size != bytecount) {
+ /* zero-fill the rest */
+ if (clear_user(ptr+size, bytecount-size) != 0) {
+ err = -EFAULT;
+ goto error_return;
+ }
+ }
+ return bytecount;
+error_return:
+ return err;
+}
+
+static int read_default_ldt(void __user * ptr, unsigned long bytecount)
+{
+ int err;
+ unsigned long size;
+ void *address;
+
+ err = 0;
+ address = &default_ldt[0];
+ size = 5*sizeof(struct desc_struct);
+ if (size > bytecount)
+ size = bytecount;
+
+ err = size;
+ if (copy_to_user(ptr, address, size))
+ err = -EFAULT;
+
+ return err;
+}
+
+static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode)
+{
+ struct mm_struct * mm = current->mm;
+ __u32 entry_1, entry_2, *lp;
+ int error;
+ struct user_desc ldt_info;
+
+ error = -EINVAL;
+ if (bytecount != sizeof(ldt_info))
+ goto out;
+ error = -EFAULT;
+ if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+ goto out;
+
+ error = -EINVAL;
+ if (ldt_info.entry_number >= LDT_ENTRIES)
+ goto out;
+ if (ldt_info.contents == 3) {
+ if (oldmode)
+ goto out;
+ if (ldt_info.seg_not_present == 0)
+ goto out;
+ }
+
+ down(&mm->context.sem);
+ if (ldt_info.entry_number >= mm->context.size) {
+ error = alloc_ldt(¤t->mm->context, ldt_info.entry_number+1, 1);
+ if (error < 0)
+ goto out_unlock;
+ }
+
+ lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt);
+
+ /* Allow LDTs to be cleared by the user. */
+ if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
+ if (oldmode || LDT_empty(&ldt_info)) {
+ entry_1 = 0;
+ entry_2 = 0;
+ goto install;
+ }
+ }
+
+ entry_1 = LDT_entry_a(&ldt_info);
+ entry_2 = LDT_entry_b(&ldt_info);
+ if (oldmode)
+ entry_2 &= ~(1 << 20);
+
+ /* Install the new entry ... */
+install:
+ *lp = entry_1;
+ *(lp+1) = entry_2;
+ error = 0;
+
+out_unlock:
+ up(&mm->context.sem);
+out:
+ return error;
+}
+
+asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+{
+ int ret = -ENOSYS;
+
+ switch (func) {
+ case 0:
+ ret = read_ldt(ptr, bytecount);
+ break;
+ case 1:
+ ret = write_ldt(ptr, bytecount, 1);
+ break;
+ case 2:
+ ret = read_default_ldt(ptr, bytecount);
+ break;
+ case 0x11:
+ ret = write_ldt(ptr, bytecount, 0);
+ break;
+ }
+ return ret;
+}
diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c
new file mode 100644
index 0000000..8600fae
--- /dev/null
+++ b/arch/i386/kernel/mca.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/i386/kernel/mca.c
+ * Written by Martin Kolinek, February 1996
+ *
+ * Changes:
+ *
+ * Chris Beauregard July 28th, 1996
+ * - Fixed up integrated SCSI detection
+ *
+ * Chris Beauregard August 3rd, 1996
+ * - Made mca_info local
+ * - Made integrated registers accessible through standard function calls
+ * - Added name field
+ * - More sanity checking
+ *
+ * Chris Beauregard August 9th, 1996
+ * - Rewrote /proc/mca
+ *
+ * Chris Beauregard January 7th, 1997
+ * - Added basic NMI-processing
+ * - Added more information to mca_info structure
+ *
+ * David Weinehall October 12th, 1998
+ * - Made a lot of cleaning up in the source
+ * - Added use of save_flags / restore_flags
+ * - Added the 'driver_loaded' flag in MCA_adapter
+ * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter
+ *
+ * David Weinehall March 24th, 1999
+ * - Fixed the output of 'Driver Installed' in /proc/mca/pos
+ * - Made the Integrated Video & SCSI show up even if they have id 0000
+ *
+ * Alexander Viro November 9th, 1999
+ * - Switched to regular procfs methods
+ *
+ * Alfred Arnold & David Weinehall August 23rd, 2000
+ * - Added support for Planar POS-registers
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mca.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/proc_fs.h>
+#include <linux/mman.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <asm/arch_hooks.h>
+
+static unsigned char which_scsi = 0;
+
+int MCA_bus = 0;
+EXPORT_SYMBOL(MCA_bus);
+
+/*
+ * Motherboard register spinlock. Untested on SMP at the moment, but
+ * are there any MCA SMP boxes?
+ *
+ * Yes - Alan
+ */
+static DEFINE_SPINLOCK(mca_lock);
+
+/* Build the status info for the adapter */
+
+static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+ mca_dev->status = MCA_ADAPTER_NONE;
+
+ mca_dev->pos_id = mca_dev->pos[0]
+ + (mca_dev->pos[1] << 8);
+
+ if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+
+ /* id = 0x0000 usually indicates hardware failure,
+ * however, ZP Gu (zpg@castle.net> reports that his 9556
+ * has 0x0000 as id and everything still works. There
+ * also seem to be an adapter with id = 0x0000; the
+ * NCR Parallel Bus Memory Card. Until this is confirmed,
+ * however, this code will stay.
+ */
+
+ mca_dev->status = MCA_ADAPTER_ERROR;
+
+ return;
+ } else if(mca_dev->pos_id != 0xffff) {
+
+ /* 0xffff usually indicates that there's no adapter,
+ * however, some integrated adapters may have 0xffff as
+ * their id and still be valid. Examples are on-board
+ * VGA of the 55sx, the integrated SCSI of the 56 & 57,
+ * and possibly also the 95 ULTIMEDIA.
+ */
+
+ mca_dev->status = MCA_ADAPTER_NORMAL;
+ }
+
+ if((mca_dev->pos_id == 0xffff ||
+ mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
+ int j;
+
+ for(j = 2; j < 8; j++) {
+ if(mca_dev->pos[j] != 0xff) {
+ mca_dev->status = MCA_ADAPTER_NORMAL;
+ break;
+ }
+ }
+ }
+
+ if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+
+ /* enabled bit is in POS 2 */
+
+ mca_dev->status = MCA_ADAPTER_DISABLED;
+ }
+} /* mca_configure_adapter_status */
+
+/*--------------------------------------------------------------------*/
+
+static struct resource mca_standard_resources[] = {
+ { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
+ { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
+ { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
+ { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
+ { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
+ { .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
+ { .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
+};
+
+#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource))
+
+/**
+ * mca_read_and_store_pos - read the POS registers into a memory buffer
+ * @pos: a char pointer to 8 bytes, contains the POS register value on
+ * successful return
+ *
+ * Returns 1 if a card actually exists (i.e. the pos isn't
+ * all 0xff) or 0 otherwise
+ */
+static int mca_read_and_store_pos(unsigned char *pos) {
+ int j;
+ int found = 0;
+
+ for(j=0; j<8; j++) {
+ if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+ /* 0xff all across means no device. 0x00 means
+ * something's broken, but a device is
+ * probably there. However, if you get 0x00
+ * from a motherboard register it won't matter
+ * what we find. For the record, on the
+ * 57SLC, the integrated SCSI adapter has
+ * 0xffff for the adapter ID, but nonzero for
+ * other registers. */
+
+ found = 1;
+ }
+ }
+ return found;
+}
+
+static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
+{
+ unsigned char byte;
+ unsigned long flags;
+
+ if(reg < 0 || reg >= 8)
+ return 0;
+
+ spin_lock_irqsave(&mca_lock, flags);
+ if(mca_dev->pos_register) {
+ /* Disable adapter setup, enable motherboard setup */
+
+ outb_p(0, MCA_ADAPTER_SETUP_REG);
+ outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+
+ byte = inb_p(MCA_POS_REG(reg));
+ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+ } else {
+
+ /* Make sure motherboard setup is off */
+
+ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+ /* Read the appropriate register */
+
+ outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
+ byte = inb_p(MCA_POS_REG(reg));
+ outb_p(0, MCA_ADAPTER_SETUP_REG);
+ }
+ spin_unlock_irqrestore(&mca_lock, flags);
+
+ mca_dev->pos[reg] = byte;
+
+ return byte;
+}
+
+static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
+ unsigned char byte)
+{
+ unsigned long flags;
+
+ if(reg < 0 || reg >= 8)
+ return;
+
+ spin_lock_irqsave(&mca_lock, flags);
+
+ /* Make sure motherboard setup is off */
+
+ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+ /* Read in the appropriate register */
+
+ outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
+ outb_p(byte, MCA_POS_REG(reg));
+ outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+ spin_unlock_irqrestore(&mca_lock, flags);
+
+ /* Update the global register list, while we have the byte */
+
+ mca_dev->pos[reg] = byte;
+
+}
+
+/* for the primary MCA bus, we have identity transforms */
+static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+{
+ return irq;
+}
+
+static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+{
+ return port;
+}
+
+static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+{
+ return mem;
+}
+
+
+static int __init mca_init(void)
+{
+ unsigned int i, j;
+ struct mca_device *mca_dev;
+ unsigned char pos[8];
+ short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
+ struct mca_bus *bus;
+
+ /* WARNING: Be careful when making changes here. Putting an adapter
+ * and the motherboard simultaneously into setup mode may result in
+ * damage to chips (according to The Indispensible PC Hardware Book
+ * by Hans-Peter Messmer). Also, we disable system interrupts (so
+ * that we are not disturbed in the middle of this).
+ */
+
+ /* Make sure the MCA bus is present */
+
+ if (mca_system_init()) {
+ printk(KERN_ERR "MCA bus system initialisation failed\n");
+ return -ENODEV;
+ }
+
+ if (!MCA_bus)
+ return -ENODEV;
+
+ printk(KERN_INFO "Micro Channel bus detected.\n");
+
+ /* All MCA systems have at least a primary bus */
+ bus = mca_attach_bus(MCA_PRIMARY_BUS);
+ if (!bus)
+ goto out_nomem;
+ bus->default_dma_mask = 0xffffffffLL;
+ bus->f.mca_write_pos = mca_pc_write_pos;
+ bus->f.mca_read_pos = mca_pc_read_pos;
+ bus->f.mca_transform_irq = mca_dummy_transform_irq;
+ bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
+ bus->f.mca_transform_memory = mca_dummy_transform_memory;
+
+ /* get the motherboard device */
+ mca_dev = kmalloc(sizeof(struct mca_device), GFP_KERNEL);
+ if(unlikely(!mca_dev))
+ goto out_nomem;
+ memset(mca_dev, 0, sizeof(struct mca_device));
+
+ /*
+ * We do not expect many MCA interrupts during initialization,
+ * but let us be safe:
+ */
+ spin_lock_irq(&mca_lock);
+
+ /* Make sure adapter setup is off */
+
+ outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+ /* Read motherboard POS registers */
+
+ mca_dev->pos_register = 0x7f;
+ outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+ mca_dev->name[0] = 0;
+ mca_read_and_store_pos(mca_dev->pos);
+ mca_configure_adapter_status(mca_dev);
+ /* fake POS and slot for a motherboard */
+ mca_dev->pos_id = MCA_MOTHERBOARD_POS;
+ mca_dev->slot = MCA_MOTHERBOARD;
+ mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+ mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+ if(unlikely(!mca_dev))
+ goto out_unlock_nomem;
+ memset(mca_dev, 0, sizeof(struct mca_device));
+
+
+ /* Put motherboard into video setup mode, read integrated video
+ * POS registers, and turn motherboard setup off.
+ */
+
+ mca_dev->pos_register = 0xdf;
+ outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+ mca_dev->name[0] = 0;
+ mca_read_and_store_pos(mca_dev->pos);
+ mca_configure_adapter_status(mca_dev);
+ /* fake POS and slot for the integrated video */
+ mca_dev->pos_id = MCA_INTEGVIDEO_POS;
+ mca_dev->slot = MCA_INTEGVIDEO;
+ mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+ /* Put motherboard into scsi setup mode, read integrated scsi
+ * POS registers, and turn motherboard setup off.
+ *
+ * It seems there are two possible SCSI registers. Martin says that
+ * for the 56,57, 0xf7 is the one, but fails on the 76.
+ * Alfredo (apena@vnet.ibm.com) says
+ * 0xfd works on his machine. We'll try both of them. I figure it's
+ * a good bet that only one could be valid at a time. This could
+ * screw up though if one is used for something else on the other
+ * machine.
+ */
+
+ for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+ outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
+ if(mca_read_and_store_pos(pos))
+ break;
+ }
+ if(which_scsi) {
+ /* found a scsi card */
+ mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+ if(unlikely(!mca_dev))
+ goto out_unlock_nomem;
+ memset(mca_dev, 0, sizeof(struct mca_device));
+
+ for(j = 0; j < 8; j++)
+ mca_dev->pos[j] = pos[j];
+
+ mca_configure_adapter_status(mca_dev);
+ /* fake POS and slot for integrated SCSI controller */
+ mca_dev->pos_id = MCA_INTEGSCSI_POS;
+ mca_dev->slot = MCA_INTEGSCSI;
+ mca_dev->pos_register = which_scsi;
+ mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+ }
+
+ /* Turn off motherboard setup */
+
+ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+ /* Now loop over MCA slots: put each adapter into setup mode, and
+ * read its POS registers. Then put adapter setup off.
+ */
+
+ for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+ outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
+ if(!mca_read_and_store_pos(pos))
+ continue;
+
+ mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+ if(unlikely(!mca_dev))
+ goto out_unlock_nomem;
+ memset(mca_dev, 0, sizeof(struct mca_device));
+
+ for(j=0; j<8; j++)
+ mca_dev->pos[j]=pos[j];
+
+ mca_dev->driver_loaded = 0;
+ mca_dev->slot = i;
+ mca_dev->pos_register = 0;
+ mca_configure_adapter_status(mca_dev);
+ mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+ }
+ outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+ /* Enable interrupts and return memory start */
+ spin_unlock_irq(&mca_lock);
+
+ for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
+ request_resource(&ioport_resource, mca_standard_resources + i);
+
+ mca_do_proc_init();
+
+ return 0;
+
+ out_unlock_nomem:
+ spin_unlock_irq(&mca_lock);
+ out_nomem:
+ printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
+ return -ENOMEM;
+}
+
+subsys_initcall(mca_init);
+
+/*--------------------------------------------------------------------*/
+
+static void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
+{
+ int slot = mca_dev->slot;
+
+ if(slot == MCA_INTEGSCSI) {
+ printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
+ mca_dev->name);
+ } else if(slot == MCA_INTEGVIDEO) {
+ printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
+ mca_dev->name);
+ } else if(slot == MCA_MOTHERBOARD) {
+ printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
+ mca_dev->name);
+ }
+
+ /* More info available in POS 6 and 7? */
+
+ if(check_flag) {
+ unsigned char pos6, pos7;
+
+ pos6 = mca_device_read_pos(mca_dev, 6);
+ pos7 = mca_device_read_pos(mca_dev, 7);
+
+ printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
+ }
+
+} /* mca_handle_nmi_slot */
+
+/*--------------------------------------------------------------------*/
+
+static int mca_handle_nmi_callback(struct device *dev, void *data)
+{
+ struct mca_device *mca_dev = to_mca_device(dev);
+ unsigned char pos5;
+
+ pos5 = mca_device_read_pos(mca_dev, 5);
+
+ if(!(pos5 & 0x80)) {
+ /* Bit 7 of POS 5 is reset when this adapter has a hardware
+ * error. Bit 7 it reset if there's error information
+ * available in POS 6 and 7.
+ */
+ mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
+ return 1;
+ }
+ return 0;
+}
+
+void mca_handle_nmi(void)
+{
+ /* First try - scan the various adapters and see if a specific
+ * adapter was responsible for the error.
+ */
+ bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
+
+ mca_nmi_hook();
+} /* mca_handle_nmi */
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
new file mode 100644
index 0000000..a77c612
--- /dev/null
+++ b/arch/i386/kernel/microcode.c
@@ -0,0 +1,512 @@
+/*
+ * Intel CPU Microcode Update Driver for Linux
+ *
+ * Copyright (C) 2000-2004 Tigran Aivazian
+ *
+ * This driver allows to upgrade microcode on Intel processors
+ * belonging to IA-32 family - PentiumPro, Pentium II,
+ * Pentium III, Xeon, Pentium 4, etc.
+ *
+ * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual,
+ * Order Number 245472 or free download from:
+ *
+ * http://developer.intel.com/design/pentium4/manuals/245472.htm
+ *
+ * For more information, go to http://www.urbanmyth.org/microcode
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Initial release.
+ * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added read() support + cleanups.
+ * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added 'device trimming' support. open(O_WRONLY) zeroes
+ * and frees the saved copy of applied microcode.
+ * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Made to use devfs (/dev/cpu/microcode) + cleanups.
+ * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Added misc device support (now uses both devfs and misc).
+ * Added MICROCODE_IOCFREE ioctl to clear memory.
+ * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Messages for error cases (non Intel & no suitable microcode).
+ * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ * Removed ->release(). Removed exclusive open and status bitmap.
+ * Added microcode_rwsem to serialize read()/write()/ioctl().
+ * Removed global kernel lock usage.
+ * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ * Write 0 to 0x8B msr and then cpuid before reading revision,
+ * so that it works even if there were no update done by the
+ * BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ * to be 0 on my machine which is why it worked even when I
+ * disabled update by the BIOS)
+ * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>
+ * Intel Pentium 4 processor support and bugfixes.
+ * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ * Bugfix for HT (Hyper-Threading) enabled processors
+ * whereby processor resources are shared by all logical processors
+ * in a single CPU package.
+ * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>,
+ * Serialize updates as required on HT processors due to speculative
+ * nature of implementation.
+ * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ * Fix the panic when writing zero-length microcode chunk.
+ * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * Support for the microcode updates in the new format.
+ * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ * because we no longer hold a copy of applied microcode
+ * in kernel memory.
+ * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ * Fix sigmatch() macro to handle old CPUs with pf == 0.
+ * Thanks to Stuart Swales for pointing out this bug.
+ */
+
+//#define DEBUG /* pr_debug */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@veritas.com>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION "1.14"
+
+#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */
+#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
+#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */
+#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */
+#define DWSIZE (sizeof (u32))
+#define get_totalsize(mc) \
+ (((microcode_t *)mc)->hdr.totalsize ? \
+ ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
+#define get_datasize(mc) \
+ (((microcode_t *)mc)->hdr.datasize ? \
+ ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+ (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DECLARE_MUTEX(microcode_sem);
+
+static void __user *user_buffer; /* user area microcode data buffer */
+static unsigned int user_buffer_size; /* it's size */
+
+typedef enum mc_error_code {
+ MC_SUCCESS = 0,
+ MC_NOTFOUND = 1,
+ MC_MARKED = 2,
+ MC_ALLOCATED = 3,
+} mc_error_code_t;
+
+static struct ucode_cpu_info {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int rev;
+ unsigned int cksum;
+ mc_error_code_t err;
+ microcode_t *mc;
+} ucode_cpu_info[NR_CPUS];
+
+static int microcode_open (struct inode *unused1, struct file *unused2)
+{
+ return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static void collect_cpu_info (void *unused)
+{
+ int cpu_num = smp_processor_id();
+ struct cpuinfo_x86 *c = cpu_data + cpu_num;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ unsigned int val[2];
+
+ uci->sig = uci->pf = uci->rev = uci->cksum = 0;
+ uci->err = MC_NOTFOUND;
+ uci->mc = NULL;
+
+ if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+ cpu_has(c, X86_FEATURE_IA64)) {
+ printk(KERN_ERR "microcode: CPU%d not a capable Intel processor\n", cpu_num);
+ return;
+ } else {
+ uci->sig = cpuid_eax(0x00000001);
+
+ if ((c->x86_model >= 5) || (c->x86 > 6)) {
+ /* get processor flags from MSR 0x17 */
+ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+ uci->pf = 1 << ((val[1] >> 18) & 7);
+ }
+ }
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
+ pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+ uci->sig, uci->pf, uci->rev);
+}
+
+static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_header, int sig, int pf, int cksum)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+
+ pr_debug("Microcode Found.\n");
+ pr_debug(" Header Revision 0x%x\n", mc_header->hdrver);
+ pr_debug(" Loader Revision 0x%x\n", mc_header->ldrver);
+ pr_debug(" Revision 0x%x \n", mc_header->rev);
+ pr_debug(" Date %x/%x/%x\n",
+ ((mc_header->date >> 24 ) & 0xff),
+ ((mc_header->date >> 16 ) & 0xff),
+ (mc_header->date & 0xFFFF));
+ pr_debug(" Signature 0x%x\n", sig);
+ pr_debug(" Type 0x%x Family 0x%x Model 0x%x Stepping 0x%x\n",
+ ((sig >> 12) & 0x3),
+ ((sig >> 8) & 0xf),
+ ((sig >> 4) & 0xf),
+ ((sig & 0xf)));
+ pr_debug(" Processor Flags 0x%x\n", pf);
+ pr_debug(" Checksum 0x%x\n", cksum);
+
+ if (mc_header->rev < uci->rev) {
+ printk(KERN_ERR "microcode: CPU%d not 'upgrading' to earlier revision"
+ " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+ goto out;
+ } else if (mc_header->rev == uci->rev) {
+ /* notify the caller of success on this cpu */
+ uci->err = MC_SUCCESS;
+ printk(KERN_ERR "microcode: CPU%d already at revision"
+ " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+ goto out;
+ }
+
+ pr_debug("microcode: CPU%d found a matching microcode update with "
+ " revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+ uci->cksum = cksum;
+ uci->pf = pf; /* keep the original mc pf for cksum calculation */
+ uci->err = MC_MARKED; /* found the match */
+out:
+ return;
+}
+
+static int find_matching_ucodes (void)
+{
+ int cursor = 0;
+ int error = 0;
+
+ while (cursor + MC_HEADER_SIZE < user_buffer_size) {
+ microcode_header_t mc_header;
+ void *newmc = NULL;
+ int i, sum, cpu_num, allocated_flag, total_size, data_size, ext_table_size;
+
+ if (copy_from_user(&mc_header, user_buffer + cursor, MC_HEADER_SIZE)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ error = -EFAULT;
+ goto out;
+ }
+
+ total_size = get_totalsize(&mc_header);
+ if ((cursor + total_size > user_buffer_size) || (total_size < DEFAULT_UCODE_TOTALSIZE)) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ error = -EINVAL;
+ goto out;
+ }
+
+ data_size = get_datasize(&mc_header);
+ if ((data_size + MC_HEADER_SIZE > total_size) || (data_size < DEFAULT_UCODE_DATASIZE)) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ error = -EINVAL;
+ goto out;
+ }
+
+ if (mc_header.ldrver != 1 || mc_header.hdrver != 1) {
+ printk(KERN_ERR "microcode: error! Unknown microcode update format\n");
+ error = -EINVAL;
+ goto out;
+ }
+
+ for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
+ continue;
+
+ if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->pf))
+ mark_microcode_update(cpu_num, &mc_header, mc_header.sig, mc_header.pf, mc_header.cksum);
+ }
+
+ ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+ if (ext_table_size) {
+ struct extended_sigtable ext_header;
+ struct extended_signature ext_sig;
+ int ext_sigcount;
+
+ if ((ext_table_size < EXT_HEADER_SIZE)
+ || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ error = -EINVAL;
+ goto out;
+ }
+ if (copy_from_user(&ext_header, user_buffer + cursor
+ + MC_HEADER_SIZE + data_size, EXT_HEADER_SIZE)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ error = -EFAULT;
+ goto out;
+ }
+ if (ext_table_size != exttable_size(&ext_header)) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ error = -EFAULT;
+ goto out;
+ }
+
+ ext_sigcount = ext_header.count;
+
+ for (i = 0; i < ext_sigcount; i++) {
+ if (copy_from_user(&ext_sig, user_buffer + cursor + MC_HEADER_SIZE + data_size + EXT_HEADER_SIZE
+ + EXT_SIGNATURE_SIZE * i, EXT_SIGNATURE_SIZE)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ error = -EFAULT;
+ goto out;
+ }
+ for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
+ continue;
+ if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->pf)) {
+ mark_microcode_update(cpu_num, &mc_header, ext_sig.sig, ext_sig.pf, ext_sig.cksum);
+ }
+ }
+ }
+ }
+ /* now check if any cpu has matched */
+ for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ if (!allocated_flag) {
+ allocated_flag = 1;
+ newmc = vmalloc(total_size);
+ if (!newmc) {
+ printk(KERN_ERR "microcode: error! Can not allocate memory\n");
+ error = -ENOMEM;
+ goto out;
+ }
+ if (copy_from_user(newmc + MC_HEADER_SIZE,
+ user_buffer + cursor + MC_HEADER_SIZE,
+ total_size - MC_HEADER_SIZE)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ vfree(newmc);
+ error = -EFAULT;
+ goto out;
+ }
+ memcpy(newmc, &mc_header, MC_HEADER_SIZE);
+ /* check extended table checksum */
+ if (ext_table_size) {
+ int ext_table_sum = 0;
+ int * ext_tablep = (((void *) newmc) + MC_HEADER_SIZE + data_size);
+ i = ext_table_size / DWSIZE;
+ while (i--) ext_table_sum += ext_tablep[i];
+ if (ext_table_sum) {
+ printk(KERN_WARNING "microcode: aborting, bad extended signature table checksum\n");
+ vfree(newmc);
+ error = -EINVAL;
+ goto out;
+ }
+ }
+
+ /* calculate the checksum */
+ i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+ while (i--) sum += ((int *)newmc)[i];
+ sum -= (mc_header.sig + mc_header.pf + mc_header.cksum);
+ }
+ ucode_cpu_info[cpu_num].mc = newmc;
+ ucode_cpu_info[cpu_num].err = MC_ALLOCATED; /* mc updated */
+ if (sum + uci->sig + uci->pf + uci->cksum != 0) {
+ printk(KERN_ERR "microcode: CPU%d aborting, bad checksum\n", cpu_num);
+ error = -EINVAL;
+ goto out;
+ }
+ }
+ }
+ cursor += total_size; /* goto the next update patch */
+ } /* end of while */
+out:
+ return error;
+}
+
+static void do_update_one (void * unused)
+{
+ unsigned long flags;
+ unsigned int val[2];
+ int cpu_num = smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+
+ if (uci->mc == NULL) {
+ printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num);
+ return;
+ }
+
+ /* serialize access to the physical write to MSR 0x79 */
+ spin_lock_irqsave(µcode_update_lock, flags);
+
+ /* write microcode via MSR 0x79 */
+ wrmsr(MSR_IA32_UCODE_WRITE,
+ (unsigned long) uci->mc->bits,
+ (unsigned long) uci->mc->bits >> 16 >> 16);
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+ __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+ /* notify the caller of success on this cpu */
+ uci->err = MC_SUCCESS;
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x, date = %08x \n",
+ cpu_num, uci->rev, val[1], uci->mc->hdr.date);
+ return;
+}
+
+static int do_microcode_update (void)
+{
+ int i, error;
+
+ if (on_each_cpu(collect_cpu_info, NULL, 1, 1) != 0) {
+ printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
+ error = -EIO;
+ goto out;
+ }
+
+ if ((error = find_matching_ucodes())) {
+ printk(KERN_ERR "microcode: Error in the microcode data\n");
+ goto out_free;
+ }
+
+ if (on_each_cpu(do_update_one, NULL, 1, 1) != 0) {
+ printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
+ error = -EIO;
+ }
+
+out_free:
+ for (i = 0; i < num_online_cpus(); i++) {
+ if (ucode_cpu_info[i].mc) {
+ int j;
+ void *tmp = ucode_cpu_info[i].mc;
+ vfree(tmp);
+ for (j = i; j < num_online_cpus(); j++) {
+ if (ucode_cpu_info[j].mc == tmp)
+ ucode_cpu_info[j].mc = NULL;
+ }
+ }
+ }
+out:
+ return error;
+}
+
+static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
+{
+ ssize_t ret;
+
+ if (len < DEFAULT_UCODE_TOTALSIZE) {
+ printk(KERN_ERR "microcode: not enough data\n");
+ return -EINVAL;
+ }
+
+ if ((len >> PAGE_SHIFT) > num_physpages) {
+ printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
+ return -EINVAL;
+ }
+
+ down(µcode_sem);
+
+ user_buffer = (void __user *) buf;
+ user_buffer_size = (int) len;
+
+ ret = do_microcode_update();
+ if (!ret)
+ ret = (ssize_t)len;
+
+ up(µcode_sem);
+
+ return ret;
+}
+
+static int microcode_ioctl (struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ /*
+ * XXX: will be removed after microcode_ctl
+ * is updated to ignore failure of this ioctl()
+ */
+ case MICROCODE_IOCFREE:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static struct file_operations microcode_fops = {
+ .owner = THIS_MODULE,
+ .write = microcode_write,
+ .ioctl = microcode_ioctl,
+ .open = microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+ .minor = MICROCODE_MINOR,
+ .name = "microcode",
+ .devfs_name = "cpu/microcode",
+ .fops = µcode_fops,
+};
+
+static int __init microcode_init (void)
+{
+ int error;
+
+ error = misc_register(µcode_dev);
+ if (error) {
+ printk(KERN_ERR
+ "microcode: can't misc_register on minor=%d\n",
+ MICROCODE_MINOR);
+ return error;
+ }
+
+ printk(KERN_INFO
+ "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@veritas.com>\n");
+ return 0;
+}
+
+static void __exit microcode_exit (void)
+{
+ misc_deregister(µcode_dev);
+ printk(KERN_INFO "IA-32 Microcode Update Driver v" MICROCODE_VERSION " unregistered\n");
+}
+
+module_init(microcode_init)
+module_exit(microcode_exit)
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
diff --git a/arch/i386/kernel/module.c b/arch/i386/kernel/module.c
new file mode 100644
index 0000000..5149c8a
--- /dev/null
+++ b/arch/i386/kernel/module.c
@@ -0,0 +1,129 @@
+/* Kernel module help for i386.
+ Copyright (C) 2001 Rusty Russell.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc_exec(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+
+ DEBUGP("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ case R_386_32:
+ /* We add the value into the location given */
+ *location += sym->st_value;
+ break;
+ case R_386_PC32:
+ /* Add the value, subtract its postition */
+ *location += sym->st_value - (uint32_t)location;
+ break;
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+ me->name);
+ return -ENOEXEC;
+}
+
+extern void apply_alternatives(void *start, void *end);
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ const Elf_Shdr *s;
+ char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ /* look for .altinstructions to patch */
+ for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+ void *seg;
+ if (strcmp(".altinstructions", secstrings + s->sh_name))
+ continue;
+ seg = (void *)s->sh_addr;
+ apply_alternatives(seg, seg + s->sh_size);
+ }
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
new file mode 100644
index 0000000..1347ab4
--- /dev/null
+++ b/arch/i386/kernel/mpparse.c
@@ -0,0 +1,1109 @@
+/*
+ * Intel Multiprocessor Specification 1.1 and 1.4
+ * compliant MP-table parsing routines.
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Erich Boleyn : MP v1.4 and additional changes.
+ * Alan Cox : Added EBDA scanning
+ * Ingo Molnar : various cleanups and rewrites
+ * Maciej W. Rozycki: Bits for default MP configurations
+ * Paul Diefenbaugh: Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
+
+#include <asm/smp.h>
+#include <asm/acpi.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/io_apic.h>
+
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#include <bios_ebda.h>
+
+/* Have we found an MP table */
+int smp_found_config;
+unsigned int __initdata maxcpus = NR_CPUS;
+
+/*
+ * Various Linux-internal data structures created from the
+ * MP-table.
+ */
+int apic_version [MAX_APICS];
+int mp_bus_id_to_type [MAX_MP_BUSSES];
+int mp_bus_id_to_node [MAX_MP_BUSSES];
+int mp_bus_id_to_local [MAX_MP_BUSSES];
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+static int mp_current_pci_id;
+
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* MP IRQ source entries */
+int mp_irq_entries;
+
+int nr_ioapics;
+
+int pic_mode;
+unsigned long mp_lapic_addr;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int boot_cpu_logical_apicid = -1U;
+/* Internal processor count */
+static unsigned int __initdata num_processors;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+
+/*
+ * Intel MP BIOS table parsing routines:
+ */
+
+
+/*
+ * Checksum an MP configuration block.
+ */
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+ int sum = 0;
+
+ while (len--)
+ sum += *mp++;
+
+ return sum & 0xFF;
+}
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
+
+#ifdef CONFIG_X86_NUMAQ
+static int MP_valid_apicid(int apicid, int version)
+{
+ return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
+}
+#else
+static int MP_valid_apicid(int apicid, int version)
+{
+ if (version >= 0x14)
+ return apicid < 0xff;
+ else
+ return apicid < 0xf;
+}
+#endif
+
+static void __init MP_processor_info (struct mpc_config_processor *m)
+{
+ int ver, apicid;
+ physid_mask_t tmp;
+
+ if (!(m->mpc_cpuflag & CPU_ENABLED))
+ return;
+
+ apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+ if (m->mpc_featureflag&(1<<0))
+ Dprintk(" Floating point unit present.\n");
+ if (m->mpc_featureflag&(1<<7))
+ Dprintk(" Machine Exception supported.\n");
+ if (m->mpc_featureflag&(1<<8))
+ Dprintk(" 64 bit compare & exchange supported.\n");
+ if (m->mpc_featureflag&(1<<9))
+ Dprintk(" Internal APIC present.\n");
+ if (m->mpc_featureflag&(1<<11))
+ Dprintk(" SEP present.\n");
+ if (m->mpc_featureflag&(1<<12))
+ Dprintk(" MTRR present.\n");
+ if (m->mpc_featureflag&(1<<13))
+ Dprintk(" PGE present.\n");
+ if (m->mpc_featureflag&(1<<14))
+ Dprintk(" MCA present.\n");
+ if (m->mpc_featureflag&(1<<15))
+ Dprintk(" CMOV present.\n");
+ if (m->mpc_featureflag&(1<<16))
+ Dprintk(" PAT present.\n");
+ if (m->mpc_featureflag&(1<<17))
+ Dprintk(" PSE present.\n");
+ if (m->mpc_featureflag&(1<<18))
+ Dprintk(" PSN present.\n");
+ if (m->mpc_featureflag&(1<<19))
+ Dprintk(" Cache Line Flush Instruction present.\n");
+ /* 20 Reserved */
+ if (m->mpc_featureflag&(1<<21))
+ Dprintk(" Debug Trace and EMON Store present.\n");
+ if (m->mpc_featureflag&(1<<22))
+ Dprintk(" ACPI Thermal Throttle Registers present.\n");
+ if (m->mpc_featureflag&(1<<23))
+ Dprintk(" MMX present.\n");
+ if (m->mpc_featureflag&(1<<24))
+ Dprintk(" FXSR present.\n");
+ if (m->mpc_featureflag&(1<<25))
+ Dprintk(" XMM present.\n");
+ if (m->mpc_featureflag&(1<<26))
+ Dprintk(" Willamette New Instructions present.\n");
+ if (m->mpc_featureflag&(1<<27))
+ Dprintk(" Self Snoop present.\n");
+ if (m->mpc_featureflag&(1<<28))
+ Dprintk(" HT present.\n");
+ if (m->mpc_featureflag&(1<<29))
+ Dprintk(" Thermal Monitor present.\n");
+ /* 30, 31 Reserved */
+
+
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ Dprintk(" Bootup CPU\n");
+ boot_cpu_physical_apicid = m->mpc_apicid;
+ boot_cpu_logical_apicid = apicid;
+ }
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+ num_processors++;
+ ver = m->mpc_apicver;
+
+ if (!MP_valid_apicid(apicid, ver)) {
+ printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
+ m->mpc_apicid, MAX_APICS);
+ --num_processors;
+ return;
+ }
+
+ tmp = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp);
+
+ /*
+ * Validate version
+ */
+ if (ver == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid);
+ ver = 0x10;
+ }
+ apic_version[m->mpc_apicid] = ver;
+ bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+}
+
+static void __init MP_bus_info (struct mpc_config_bus *m)
+{
+ char str[7];
+
+ memcpy(str, m->mpc_bustype, 6);
+ str[6] = 0;
+
+ mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+
+ if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
+ } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+ } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
+ mpc_oem_pci_bus(m, translation_table[mpc_record]);
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+ mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
+ mp_current_pci_id++;
+ } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+ } else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98;
+ } else {
+ printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
+ }
+}
+
+static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+{
+ if (!(m->mpc_flags & MPC_APIC_USABLE))
+ return;
+
+ printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n",
+ m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
+ MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
+ }
+ if (!m->mpc_apicaddr) {
+ printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
+ " found in MP table, skipping!\n");
+ return;
+ }
+ mp_ioapics[nr_ioapics] = *m;
+ nr_ioapics++;
+}
+
+static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+{
+ mp_irqs [mp_irq_entries] = *m;
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+ m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+}
+
+static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+{
+ Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
+ m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+ /*
+ * Well it seems all SMP boards in existence
+ * use ExtINT/LVT1 == LINT0 and
+ * NMI/LVT2 == LINT1 - the following check
+ * will show us if this assumptions is false.
+ * Until then we do not have to add baggage.
+ */
+ if ((m->mpc_irqtype == mp_ExtINT) &&
+ (m->mpc_destapiclint != 0))
+ BUG();
+ if ((m->mpc_irqtype == mp_NMI) &&
+ (m->mpc_destapiclint != 1))
+ BUG();
+}
+
+#ifdef CONFIG_X86_NUMAQ
+static void __init MP_translation_info (struct mpc_config_translation *m)
+{
+ printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+
+ if (mpc_record >= MAX_MPC_ENTRY)
+ printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+ else
+ translation_table[mpc_record] = m; /* stash this for later */
+ if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+ node_set_online(m->trans_quad);
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
+ unsigned short oemsize)
+{
+ int count = sizeof (*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable)+count;
+
+ mpc_record = 0;
+ printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+ if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
+ {
+ printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->oem_signature[0],
+ oemtable->oem_signature[1],
+ oemtable->oem_signature[2],
+ oemtable->oem_signature[3]);
+ return;
+ }
+ if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
+ {
+ printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+ return;
+ }
+ while (count < oemtable->oem_length) {
+ switch (*oemptr) {
+ case MP_TRANSLATION:
+ {
+ struct mpc_config_translation *m=
+ (struct mpc_config_translation *)oemptr;
+ MP_translation_info(m);
+ oemptr += sizeof(*m);
+ count += sizeof(*m);
+ ++mpc_record;
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
+ return;
+ }
+ }
+ }
+}
+
+static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (strncmp(oem, "IBM NUMA", 8))
+ printk("Warning! May not be a NUMA-Q system!\n");
+ if (mpc->mpc_oemptr)
+ smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
+ mpc->mpc_oemsize);
+}
+#endif /* CONFIG_X86_NUMAQ */
+
+/*
+ * Read/parse the MPC
+ */
+
+static int __init smp_read_mpc(struct mp_config_table *mpc)
+{
+ char str[16];
+ char oem[10];
+ int count=sizeof(*mpc);
+ unsigned char *mpt=((unsigned char *)mpc)+count;
+
+ if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
+ printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
+ *(u32 *)mpc->mpc_signature);
+ return 0;
+ }
+ if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
+ printk(KERN_ERR "SMP mptable: checksum error!\n");
+ return 0;
+ }
+ if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
+ printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
+ mpc->mpc_spec);
+ return 0;
+ }
+ if (!mpc->mpc_lapic) {
+ printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+ return 0;
+ }
+ memcpy(oem,mpc->mpc_oem,8);
+ oem[8]=0;
+ printk(KERN_INFO "OEM ID: %s ",oem);
+
+ memcpy(str,mpc->mpc_productid,12);
+ str[12]=0;
+ printk("Product ID: %s ",str);
+
+ mps_oem_check(mpc, oem, str);
+
+ printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
+
+ /*
+ * Save the local APIC address (it might be non-default) -- but only
+ * if we're not using ACPI.
+ */
+ if (!acpi_lapic)
+ mp_lapic_addr = mpc->mpc_lapic;
+
+ /*
+ * Now process the configuration blocks.
+ */
+ mpc_record = 0;
+ while (count < mpc->mpc_length) {
+ switch(*mpt) {
+ case MP_PROCESSOR:
+ {
+ struct mpc_config_processor *m=
+ (struct mpc_config_processor *)mpt;
+ /* ACPI may have already provided this data */
+ if (!acpi_lapic)
+ MP_processor_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_BUS:
+ {
+ struct mpc_config_bus *m=
+ (struct mpc_config_bus *)mpt;
+ MP_bus_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_IOAPIC:
+ {
+ struct mpc_config_ioapic *m=
+ (struct mpc_config_ioapic *)mpt;
+ MP_ioapic_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ case MP_INTSRC:
+ {
+ struct mpc_config_intsrc *m=
+ (struct mpc_config_intsrc *)mpt;
+
+ MP_intsrc_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ case MP_LINTSRC:
+ {
+ struct mpc_config_lintsrc *m=
+ (struct mpc_config_lintsrc *)mpt;
+ MP_lintsrc_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ default:
+ {
+ count = mpc->mpc_length;
+ break;
+ }
+ }
+ ++mpc_record;
+ }
+ clustered_apic_check();
+ if (!num_processors)
+ printk(KERN_ERR "SMP mptable: no processors registered!\n");
+ return num_processors;
+}
+
+static int __init ELCR_trigger(unsigned int irq)
+{
+ unsigned int port;
+
+ port = 0x4d0 + (irq >> 3);
+ return (inb(port) >> (irq & 7)) & 1;
+}
+
+static void __init construct_default_ioirq_mptable(int mpc_default_type)
+{
+ struct mpc_config_intsrc intsrc;
+ int i;
+ int ELCR_fallback = 0;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* conforming */
+ intsrc.mpc_srcbus = 0;
+ intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+
+ intsrc.mpc_irqtype = mp_INT;
+
+ /*
+ * If true, we have an ISA/PCI system with no IRQ entries
+ * in the MP table. To prevent the PCI interrupts from being set up
+ * incorrectly, we try to use the ELCR. The sanity check to see if
+ * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
+ * never be level sensitive, so we simply see if the ELCR agrees.
+ * If it does, we assume it's valid.
+ */
+ if (mpc_default_type == 5) {
+ printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+
+ if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
+ printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
+ else {
+ printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+ ELCR_fallback = 1;
+ }
+ }
+
+ for (i = 0; i < 16; i++) {
+ switch (mpc_default_type) {
+ case 2:
+ if (i == 0 || i == 13)
+ continue; /* IRQ0 & IRQ13 not connected */
+ /* fall through */
+ default:
+ if (i == 2)
+ continue; /* IRQ2 is never connected */
+ }
+
+ if (ELCR_fallback) {
+ /*
+ * If the ELCR indicates a level-sensitive interrupt, we
+ * copy that information over to the MP table in the
+ * irqflag field (level sensitive, active high polarity).
+ */
+ if (ELCR_trigger(i))
+ intsrc.mpc_irqflag = 13;
+ else
+ intsrc.mpc_irqflag = 0;
+ }
+
+ intsrc.mpc_srcbusirq = i;
+ intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+ MP_intsrc_info(&intsrc);
+ }
+
+ intsrc.mpc_irqtype = mp_ExtINT;
+ intsrc.mpc_srcbusirq = 0;
+ intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+ MP_intsrc_info(&intsrc);
+}
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+ struct mpc_config_processor processor;
+ struct mpc_config_bus bus;
+ struct mpc_config_ioapic ioapic;
+ struct mpc_config_lintsrc lintsrc;
+ int linttypes[2] = { mp_ExtINT, mp_NMI };
+ int i;
+
+ /*
+ * local APIC has default address
+ */
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /*
+ * 2 CPUs, numbered 0 & 1.
+ */
+ processor.mpc_type = MP_PROCESSOR;
+ /* Either an integrated APIC or a discrete 82489DX. */
+ processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_cpuflag = CPU_ENABLED;
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) |
+ boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+ for (i = 0; i < 2; i++) {
+ processor.mpc_apicid = i;
+ MP_processor_info(&processor);
+ }
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ switch (mpc_default_type) {
+ default:
+ printk("???\n");
+ printk(KERN_ERR "Unknown standard configuration %d\n",
+ mpc_default_type);
+ /* fall through */
+ case 1:
+ case 5:
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ break;
+ case 2:
+ case 6:
+ case 3:
+ memcpy(bus.mpc_bustype, "EISA ", 6);
+ break;
+ case 4:
+ case 7:
+ memcpy(bus.mpc_bustype, "MCA ", 6);
+ }
+ MP_bus_info(&bus);
+ if (mpc_default_type > 4) {
+ bus.mpc_busid = 1;
+ memcpy(bus.mpc_bustype, "PCI ", 6);
+ MP_bus_info(&bus);
+ }
+
+ ioapic.mpc_type = MP_IOAPIC;
+ ioapic.mpc_apicid = 2;
+ ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.mpc_flags = MPC_APIC_USABLE;
+ ioapic.mpc_apicaddr = 0xFEC00000;
+ MP_ioapic_info(&ioapic);
+
+ /*
+ * We set up most of the low 16 IO-APIC pins according to MPS rules.
+ */
+ construct_default_ioirq_mptable(mpc_default_type);
+
+ lintsrc.mpc_type = MP_LINTSRC;
+ lintsrc.mpc_irqflag = 0; /* conforming */
+ lintsrc.mpc_srcbusid = 0;
+ lintsrc.mpc_srcbusirq = 0;
+ lintsrc.mpc_destapic = MP_APIC_ALL;
+ for (i = 0; i < 2; i++) {
+ lintsrc.mpc_irqtype = linttypes[i];
+ lintsrc.mpc_destapiclint = i;
+ MP_lintsrc_info(&lintsrc);
+ }
+}
+
+static struct intel_mp_floating *mpf_found;
+
+/*
+ * Scan the memory blocks for an SMP configuration block.
+ */
+void __init get_smp_config (void)
+{
+ struct intel_mp_floating *mpf = mpf_found;
+
+ /*
+ * ACPI may be used to obtain the entire SMP configuration or just to
+ * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic) {
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+ return;
+ }
+ else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
+
+ printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
+ if (mpf->mpf_feature2 & (1<<7)) {
+ printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
+ pic_mode = 1;
+ } else {
+ printk(KERN_INFO " Virtual Wire compatibility mode.\n");
+ pic_mode = 0;
+ }
+
+ /*
+ * Now see if we need to read further.
+ */
+ if (mpf->mpf_feature1 != 0) {
+
+ printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+ construct_default_ISA_mptable(mpf->mpf_feature1);
+
+ } else if (mpf->mpf_physptr) {
+
+ /*
+ * Read the physical hardware table. Anything here will
+ * override the defaults.
+ */
+ if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+ smp_found_config = 0;
+ printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
+ printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+ return;
+ }
+ /*
+ * If there are no explicit MP IRQ entries, then we are
+ * broken. We set up most of the low 16 IO-APIC pins to
+ * ISA defaults and hope it will work.
+ */
+ if (!mp_irq_entries) {
+ struct mpc_config_bus bus;
+
+ printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ MP_bus_info(&bus);
+
+ construct_default_ioirq_mptable(0);
+ }
+
+ } else
+ BUG();
+
+ printk(KERN_INFO "Processors: %d\n", num_processors);
+ /*
+ * Only use the first configuration found.
+ */
+}
+
+static int __init smp_scan_config (unsigned long base, unsigned long length)
+{
+ unsigned long *bp = phys_to_virt(base);
+ struct intel_mp_floating *mpf;
+
+ Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
+ if (sizeof(*mpf) != 16)
+ printk("Error: MPF size\n");
+
+ while (length > 0) {
+ mpf = (struct intel_mp_floating *)bp;
+ if ((*bp == SMP_MAGIC_IDENT) &&
+ (mpf->mpf_length == 1) &&
+ !mpf_checksum((unsigned char *)bp, 16) &&
+ ((mpf->mpf_specification == 1)
+ || (mpf->mpf_specification == 4)) ) {
+
+ smp_found_config = 1;
+ printk(KERN_INFO "found SMP MP-table at %08lx\n",
+ virt_to_phys(mpf));
+ reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
+ if (mpf->mpf_physptr) {
+ /*
+ * We cannot access to MPC table to compute
+ * table size yet, as only few megabytes from
+ * the bottom is mapped now.
+ * PC-9800's MPC table places on the very last
+ * of physical memory; so that simply reserving
+ * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+ * in reserve_bootmem.
+ */
+ unsigned long size = PAGE_SIZE;
+ unsigned long end = max_low_pfn * PAGE_SIZE;
+ if (mpf->mpf_physptr + size > end)
+ size = end - mpf->mpf_physptr;
+ reserve_bootmem(mpf->mpf_physptr, size);
+ }
+
+ mpf_found = mpf;
+ return 1;
+ }
+ bp += 4;
+ length -= 16;
+ }
+ return 0;
+}
+
+void __init find_smp_config (void)
+{
+ unsigned int address;
+
+ /*
+ * FIXME: Linux assumes you have 640K of base ram..
+ * this continues the error...
+ *
+ * 1) Scan the bottom 1K for a signature
+ * 2) Scan the top 1K of base RAM
+ * 3) Scan the 64K of bios
+ */
+ if (smp_scan_config(0x0,0x400) ||
+ smp_scan_config(639*0x400,0x400) ||
+ smp_scan_config(0xF0000,0x10000))
+ return;
+ /*
+ * If it is an SMP machine we should know now, unless the
+ * configuration is in an EISA/MCA bus machine with an
+ * extended bios data area.
+ *
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E, calculate and scan it here.
+ *
+ * NOTE! There are Linux loaders that will corrupt the EBDA
+ * area, and as such this kind of SMP config may be less
+ * trustworthy, simply because the SMP table may have been
+ * stomped on during early boot. These loaders are buggy and
+ * should be fixed.
+ *
+ * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
+ */
+
+ address = get_bios_ebda();
+ if (address)
+ smp_scan_config(address, 0x400);
+}
+
+/* --------------------------------------------------------------------------
+ ACPI-based MP Configuration
+ -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_BOOT
+
+void __init mp_register_lapic_address (
+ u64 address)
+{
+ mp_lapic_addr = (unsigned long) address;
+
+ set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
+
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+
+ Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+}
+
+
+void __init mp_register_lapic (
+ u8 id,
+ u8 enabled)
+{
+ struct mpc_config_processor processor;
+ int boot_cpu = 0;
+
+ if (MAX_APICS - id <= 0) {
+ printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
+ id, MAX_APICS);
+ return;
+ }
+
+ if (id == boot_cpu_physical_apicid)
+ boot_cpu = 1;
+
+ processor.mpc_type = MP_PROCESSOR;
+ processor.mpc_apicid = id;
+ processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
+ processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+
+ MP_processor_info(&processor);
+}
+
+#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
+
+#define MP_ISA_BUS 0
+#define MP_MAX_IOAPIC_PIN 127
+
+static struct mp_ioapic_routing {
+ int apic_id;
+ int gsi_base;
+ int gsi_end;
+ u32 pin_programmed[4];
+} mp_ioapic_routing[MAX_IO_APICS];
+
+
+static int mp_find_ioapic (
+ int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_ioapic_routing[i].gsi_base)
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+
+ return -1;
+}
+
+
+void __init mp_register_ioapic (
+ u8 id,
+ u32 address,
+ u32 gsi_base)
+{
+ int idx = 0;
+
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+ }
+ if (!address) {
+ printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+ " found in MADT table, skipping!\n");
+ return;
+ }
+
+ idx = nr_ioapics++;
+
+ mp_ioapics[idx].mpc_type = MP_IOAPIC;
+ mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].mpc_apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
+ mp_ioapic_routing[idx].gsi_base = gsi_base;
+ mp_ioapic_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
+ mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapic_routing[idx].gsi_base,
+ mp_ioapic_routing[idx].gsi_end);
+
+ return;
+}
+
+
+void __init mp_override_legacy_irq (
+ u8 bus_irq,
+ u8 polarity,
+ u8 trigger,
+ u32 gsi)
+{
+ struct mpc_config_intsrc intsrc;
+ int ioapic = -1;
+ int pin = -1;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_irqflag = (trigger << 2) | polarity;
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+ intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
+ intsrc.mpc_dstirq = pin; /* INTIN# */
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+ intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+
+ return;
+}
+
+int es7000_plat;
+
+void __init mp_config_acpi_legacy_irqs (void)
+{
+ struct mpc_config_intsrc intsrc;
+ int i = 0;
+ int ioapic = -1;
+
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+ Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+ /*
+ * Older generations of ES7000 have no legacy identity mappings
+ */
+ if (es7000_plat == 1)
+ return;
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ */
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ return;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* Conforming */
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overriden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < 16; i++) {
+ int idx;
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mpc_config_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
+ (irq->mpc_dstirq == i))
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_srcbusirq = i; /* Identity mapped */
+ intsrc.mpc_dstirq = i;
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
+ "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
+ intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+ }
+}
+
+int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+{
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+
+#ifdef CONFIG_ACPI_BUS
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_fadt.sci_int == gsi)
+ return gsi;
+#endif
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ if (ioapic_renumber_irq)
+ gsi = ioapic_renumber_irq(ioapic, gsi);
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ bit = ioapic_pin % 32;
+ idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
+ if (idx > 3) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
+ return gsi;
+ }
+ if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+ Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+ mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+ return gsi;
+ }
+
+ mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+
+ io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+ edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+ return gsi;
+}
+
+#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
+#endif /*CONFIG_ACPI_BOOT*/
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
new file mode 100644
index 0000000..05d9f8f
--- /dev/null
+++ b/arch/i386/kernel/msr.c
@@ -0,0 +1,346 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2000 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * msr.c
+ *
+ * x86 MSR access device
+ *
+ * This device is accessed by lseek() to the appropriate register number
+ * and then read/write in chunks of 8 bytes. A larger size means multiple
+ * reads or writes of the same register.
+ *
+ * This driver uses /dev/cpu/%d/msr where %d is the minor number, and on
+ * an SMP box will direct the access to CPU %d.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static struct class_simple *msr_class;
+
+/* Note: "err" is handled in a funny way below. Otherwise one version
+ of gcc or another breaks. */
+
+static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx)
+{
+ int err;
+
+ asm volatile ("1: wrmsr\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %4,%0\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n" " .long 1b,3b\n" ".previous":"=&bDS" (err)
+ :"a"(eax), "d"(edx), "c"(reg), "i"(-EIO), "0"(0));
+
+ return err;
+}
+
+static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx)
+{
+ int err;
+
+ asm volatile ("1: rdmsr\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %4,%0\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,3b\n"
+ ".previous":"=&bDS" (err), "=a"(*eax), "=d"(*edx)
+ :"c"(reg), "i"(-EIO), "0"(0));
+
+ return err;
+}
+
+#ifdef CONFIG_SMP
+
+struct msr_command {
+ int cpu;
+ int err;
+ u32 reg;
+ u32 data[2];
+};
+
+static void msr_smp_wrmsr(void *cmd_block)
+{
+ struct msr_command *cmd = (struct msr_command *)cmd_block;
+
+ if (cmd->cpu == smp_processor_id())
+ cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]);
+}
+
+static void msr_smp_rdmsr(void *cmd_block)
+{
+ struct msr_command *cmd = (struct msr_command *)cmd_block;
+
+ if (cmd->cpu == smp_processor_id())
+ cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]);
+}
+
+static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+{
+ struct msr_command cmd;
+ int ret;
+
+ preempt_disable();
+ if (cpu == smp_processor_id()) {
+ ret = wrmsr_eio(reg, eax, edx);
+ } else {
+ cmd.cpu = cpu;
+ cmd.reg = reg;
+ cmd.data[0] = eax;
+ cmd.data[1] = edx;
+
+ smp_call_function(msr_smp_wrmsr, &cmd, 1, 1);
+ ret = cmd.err;
+ }
+ preempt_enable();
+ return ret;
+}
+
+static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx)
+{
+ struct msr_command cmd;
+ int ret;
+
+ preempt_disable();
+ if (cpu == smp_processor_id()) {
+ ret = rdmsr_eio(reg, eax, edx);
+ } else {
+ cmd.cpu = cpu;
+ cmd.reg = reg;
+
+ smp_call_function(msr_smp_rdmsr, &cmd, 1, 1);
+
+ *eax = cmd.data[0];
+ *edx = cmd.data[1];
+
+ ret = cmd.err;
+ }
+ preempt_enable();
+ return ret;
+}
+
+#else /* ! CONFIG_SMP */
+
+static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+{
+ return wrmsr_eio(reg, eax, edx);
+}
+
+static inline int do_rdmsr(int cpu, u32 reg, u32 *eax, u32 *edx)
+{
+ return rdmsr_eio(reg, eax, edx);
+}
+
+#endif /* ! CONFIG_SMP */
+
+static loff_t msr_seek(struct file *file, loff_t offset, int orig)
+{
+ loff_t ret = -EINVAL;
+
+ lock_kernel();
+ switch (orig) {
+ case 0:
+ file->f_pos = offset;
+ ret = file->f_pos;
+ break;
+ case 1:
+ file->f_pos += offset;
+ ret = file->f_pos;
+ }
+ unlock_kernel();
+ return ret;
+}
+
+static ssize_t msr_read(struct file *file, char __user * buf,
+ size_t count, loff_t * ppos)
+{
+ u32 __user *tmp = (u32 __user *) buf;
+ u32 data[2];
+ size_t rv;
+ u32 reg = *ppos;
+ int cpu = iminor(file->f_dentry->d_inode);
+ int err;
+
+ if (count % 8)
+ return -EINVAL; /* Invalid chunk size */
+
+ for (rv = 0; count; count -= 8) {
+ err = do_rdmsr(cpu, reg, &data[0], &data[1]);
+ if (err)
+ return err;
+ if (copy_to_user(tmp, &data, 8))
+ return -EFAULT;
+ tmp += 2;
+ }
+
+ return ((char __user *)tmp) - buf;
+}
+
+static ssize_t msr_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ const u32 __user *tmp = (const u32 __user *)buf;
+ u32 data[2];
+ size_t rv;
+ u32 reg = *ppos;
+ int cpu = iminor(file->f_dentry->d_inode);
+ int err;
+
+ if (count % 8)
+ return -EINVAL; /* Invalid chunk size */
+
+ for (rv = 0; count; count -= 8) {
+ if (copy_from_user(&data, tmp, 8))
+ return -EFAULT;
+ err = do_wrmsr(cpu, reg, data[0], data[1]);
+ if (err)
+ return err;
+ tmp += 2;
+ }
+
+ return ((char __user *)tmp) - buf;
+}
+
+static int msr_open(struct inode *inode, struct file *file)
+{
+ unsigned int cpu = iminor(file->f_dentry->d_inode);
+ struct cpuinfo_x86 *c = &(cpu_data)[cpu];
+
+ if (cpu >= NR_CPUS || !cpu_online(cpu))
+ return -ENXIO; /* No such CPU */
+ if (!cpu_has(c, X86_FEATURE_MSR))
+ return -EIO; /* MSR not supported */
+
+ return 0;
+}
+
+/*
+ * File operations we support
+ */
+static struct file_operations msr_fops = {
+ .owner = THIS_MODULE,
+ .llseek = msr_seek,
+ .read = msr_read,
+ .write = msr_write,
+ .open = msr_open,
+};
+
+static int msr_class_simple_device_add(int i)
+{
+ int err = 0;
+ struct class_device *class_err;
+
+ class_err = class_simple_device_add(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+ if (IS_ERR(class_err))
+ err = PTR_ERR(class_err);
+ return err;
+}
+
+static int __devinit msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ msr_class_simple_device_add(cpu);
+ break;
+ case CPU_DEAD:
+ class_simple_device_remove(MKDEV(MSR_MAJOR, cpu));
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block msr_class_cpu_notifier =
+{
+ .notifier_call = msr_class_cpu_callback,
+};
+
+static int __init msr_init(void)
+{
+ int i, err = 0;
+ i = 0;
+
+ if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) {
+ printk(KERN_ERR "msr: unable to get major %d for msr\n",
+ MSR_MAJOR);
+ err = -EBUSY;
+ goto out;
+ }
+ msr_class = class_simple_create(THIS_MODULE, "msr");
+ if (IS_ERR(msr_class)) {
+ err = PTR_ERR(msr_class);
+ goto out_chrdev;
+ }
+ for_each_online_cpu(i) {
+ err = msr_class_simple_device_add(i);
+ if (err != 0)
+ goto out_class;
+ }
+ register_cpu_notifier(&msr_class_cpu_notifier);
+
+ err = 0;
+ goto out;
+
+out_class:
+ i = 0;
+ for_each_online_cpu(i)
+ class_simple_device_remove(MKDEV(MSR_MAJOR, i));
+ class_simple_destroy(msr_class);
+out_chrdev:
+ unregister_chrdev(MSR_MAJOR, "cpu/msr");
+out:
+ return err;
+}
+
+static void __exit msr_exit(void)
+{
+ int cpu = 0;
+ for_each_online_cpu(cpu)
+ class_simple_device_remove(MKDEV(MSR_MAJOR, cpu));
+ class_simple_destroy(msr_class);
+ unregister_chrdev(MSR_MAJOR, "cpu/msr");
+ unregister_cpu_notifier(&msr_class_cpu_notifier);
+}
+
+module_init(msr_init);
+module_exit(msr_exit)
+
+MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>");
+MODULE_DESCRIPTION("x86 generic MSR driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
new file mode 100644
index 0000000..f5b0c50
--- /dev/null
+++ b/arch/i386/kernel/nmi.c
@@ -0,0 +1,570 @@
+/*
+ * linux/arch/i386/nmi.c
+ *
+ * NMI watchdog support on APIC systems
+ *
+ * Started by Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes:
+ * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
+ * Mikael Pettersson : Power Management for local APIC NMI watchdog.
+ * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
+ * Pavel Machek and
+ * Mikael Pettersson : PM converted to driver model. Disable/enable API.
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/nmi.h>
+#include <linux/sysdev.h>
+#include <linux/sysctl.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/nmi.h>
+
+#include "mach_traps.h"
+
+unsigned int nmi_watchdog = NMI_NONE;
+extern int unknown_nmi_panic;
+static unsigned int nmi_hz = HZ;
+static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
+ * - it may be reserved by some other driver, or not
+ * - when not reserved by some other driver, it may be used for
+ * the NMI watchdog, or not
+ *
+ * This is maintained separately from nmi_active because the NMI
+ * watchdog may also be driven from the I/O APIC timer.
+ */
+static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
+static unsigned int lapic_nmi_owner;
+#define LAPIC_NMI_WATCHDOG (1<<0)
+#define LAPIC_NMI_RESERVED (1<<1)
+
+/* nmi_active:
+ * +1: the lapic NMI watchdog is active, but can be disabled
+ * 0: the lapic NMI watchdog has not been set up, and cannot
+ * be enabled
+ * -1: the lapic NMI watchdog is disabled, but can be enabled
+ */
+int nmi_active;
+
+#define K7_EVNTSEL_ENABLE (1 << 22)
+#define K7_EVNTSEL_INT (1 << 20)
+#define K7_EVNTSEL_OS (1 << 17)
+#define K7_EVNTSEL_USR (1 << 16)
+#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
+#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
+
+#define P6_EVNTSEL0_ENABLE (1 << 22)
+#define P6_EVNTSEL_INT (1 << 20)
+#define P6_EVNTSEL_OS (1 << 17)
+#define P6_EVNTSEL_USR (1 << 16)
+#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
+#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
+
+#define MSR_P4_MISC_ENABLE 0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
+#define MSR_P4_PERFCTR0 0x300
+#define MSR_P4_CCCR0 0x360
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS (1<<3)
+#define P4_ESCR_USR (1<<2)
+#define P4_CCCR_OVF_PMI0 (1<<26)
+#define P4_CCCR_OVF_PMI1 (1<<27)
+#define P4_CCCR_THRESHOLD(N) ((N)<<20)
+#define P4_CCCR_COMPLEMENT (1<<19)
+#define P4_CCCR_COMPARE (1<<18)
+#define P4_CCCR_REQUIRED (3<<16)
+#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
+#define P4_CCCR_ENABLE (1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ CRU_ESCR0 (with any non-null event selector) through a complemented
+ max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0 0x30C
+#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0 \
+ (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
+ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+int __init check_nmi_watchdog (void)
+{
+ unsigned int prev_nmi_count[NR_CPUS];
+ int cpu;
+
+ printk(KERN_INFO "testing NMI watchdog ... ");
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
+ local_irq_enable();
+ mdelay((10*1000)/nmi_hz); // wait 10 ticks
+
+ /* FIXME: Only boot CPU is online at this stage. Check CPUs
+ as they come up. */
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+#ifdef CONFIG_SMP
+ /* Check cpu_callin_map here because that is set
+ after the timer is started. */
+ if (!cpu_isset(cpu, cpu_callin_map))
+ continue;
+#endif
+ if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
+ printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+ nmi_active = 0;
+ lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+ return -1;
+ }
+ }
+ printk("OK.\n");
+
+ /* now that we know it works we can reduce NMI frequency to
+ something more reasonable; makes a difference in some configs */
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ nmi_hz = 1;
+
+ return 0;
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+ int nmi;
+
+ get_option(&str, &nmi);
+
+ if (nmi >= NMI_INVALID)
+ return 0;
+ if (nmi == NMI_NONE)
+ nmi_watchdog = nmi;
+ /*
+ * If any other x86 CPU has a local APIC, then
+ * please test the NMI stuff there and send me the
+ * missing bits. Right now Intel P6/P4 and AMD K7 only.
+ */
+ if ((nmi == NMI_LOCAL_APIC) &&
+ (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
+ nmi_watchdog = nmi;
+ if ((nmi == NMI_LOCAL_APIC) &&
+ (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+ (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
+ nmi_watchdog = nmi;
+ /*
+ * We can enable the IO-APIC watchdog
+ * unconditionally.
+ */
+ if (nmi == NMI_IO_APIC) {
+ nmi_active = 1;
+ nmi_watchdog = nmi;
+ }
+ return 1;
+}
+
+__setup("nmi_watchdog=", setup_nmi_watchdog);
+
+static void disable_lapic_nmi_watchdog(void)
+{
+ if (nmi_active <= 0)
+ return;
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ wrmsr(MSR_K7_EVNTSEL0, 0, 0);
+ break;
+ case X86_VENDOR_INTEL:
+ switch (boot_cpu_data.x86) {
+ case 6:
+ if (boot_cpu_data.x86_model > 0xd)
+ break;
+
+ wrmsr(MSR_P6_EVNTSEL0, 0, 0);
+ break;
+ case 15:
+ if (boot_cpu_data.x86_model > 0x3)
+ break;
+
+ wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+ wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+ break;
+ }
+ break;
+ }
+ nmi_active = -1;
+ /* tell do_nmi() and others that we're not active any more */
+ nmi_watchdog = 0;
+}
+
+static void enable_lapic_nmi_watchdog(void)
+{
+ if (nmi_active < 0) {
+ nmi_watchdog = NMI_LOCAL_APIC;
+ setup_apic_nmi_watchdog();
+ }
+}
+
+int reserve_lapic_nmi(void)
+{
+ unsigned int old_owner;
+
+ spin_lock(&lapic_nmi_owner_lock);
+ old_owner = lapic_nmi_owner;
+ lapic_nmi_owner |= LAPIC_NMI_RESERVED;
+ spin_unlock(&lapic_nmi_owner_lock);
+ if (old_owner & LAPIC_NMI_RESERVED)
+ return -EBUSY;
+ if (old_owner & LAPIC_NMI_WATCHDOG)
+ disable_lapic_nmi_watchdog();
+ return 0;
+}
+
+void release_lapic_nmi(void)
+{
+ unsigned int new_owner;
+
+ spin_lock(&lapic_nmi_owner_lock);
+ new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
+ lapic_nmi_owner = new_owner;
+ spin_unlock(&lapic_nmi_owner_lock);
+ if (new_owner & LAPIC_NMI_WATCHDOG)
+ enable_lapic_nmi_watchdog();
+}
+
+void disable_timer_nmi_watchdog(void)
+{
+ if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
+ return;
+
+ unset_nmi_callback();
+ nmi_active = -1;
+ nmi_watchdog = NMI_NONE;
+}
+
+void enable_timer_nmi_watchdog(void)
+{
+ if (nmi_active < 0) {
+ nmi_watchdog = NMI_IO_APIC;
+ touch_nmi_watchdog();
+ nmi_active = 1;
+ }
+}
+
+#ifdef CONFIG_PM
+
+static int nmi_pm_active; /* nmi_active before suspend */
+
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
+{
+ nmi_pm_active = nmi_active;
+ disable_lapic_nmi_watchdog();
+ return 0;
+}
+
+static int lapic_nmi_resume(struct sys_device *dev)
+{
+ if (nmi_pm_active > 0)
+ enable_lapic_nmi_watchdog();
+ return 0;
+}
+
+
+static struct sysdev_class nmi_sysclass = {
+ set_kset_name("lapic_nmi"),
+ .resume = lapic_nmi_resume,
+ .suspend = lapic_nmi_suspend,
+};
+
+static struct sys_device device_lapic_nmi = {
+ .id = 0,
+ .cls = &nmi_sysclass,
+};
+
+static int __init init_lapic_nmi_sysfs(void)
+{
+ int error;
+
+ if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
+ return 0;
+
+ error = sysdev_class_register(&nmi_sysclass);
+ if (!error)
+ error = sysdev_register(&device_lapic_nmi);
+ return error;
+}
+/* must come after the local APIC's device_initcall() */
+late_initcall(init_lapic_nmi_sysfs);
+
+#endif /* CONFIG_PM */
+
+/*
+ * Activate the NMI watchdog via the local APIC.
+ * Original code written by Keith Owens.
+ */
+
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+ unsigned int i;
+
+ for(i = 0; i < n; ++i)
+ wrmsr(base+i, 0, 0);
+}
+
+static void setup_k7_watchdog(void)
+{
+ unsigned int evntsel;
+
+ nmi_perfctr_msr = MSR_K7_PERFCTR0;
+
+ clear_msr_range(MSR_K7_EVNTSEL0, 4);
+ clear_msr_range(MSR_K7_PERFCTR0, 4);
+
+ evntsel = K7_EVNTSEL_INT
+ | K7_EVNTSEL_OS
+ | K7_EVNTSEL_USR
+ | K7_NMI_EVENT;
+
+ wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+ Dprintk("setting K7_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
+ wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ evntsel |= K7_EVNTSEL_ENABLE;
+ wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+}
+
+static void setup_p6_watchdog(void)
+{
+ unsigned int evntsel;
+
+ nmi_perfctr_msr = MSR_P6_PERFCTR0;
+
+ clear_msr_range(MSR_P6_EVNTSEL0, 2);
+ clear_msr_range(MSR_P6_PERFCTR0, 2);
+
+ evntsel = P6_EVNTSEL_INT
+ | P6_EVNTSEL_OS
+ | P6_EVNTSEL_USR
+ | P6_NMI_EVENT;
+
+ wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
+ Dprintk("setting P6_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
+ wrmsr(MSR_P6_PERFCTR0, -(cpu_khz/nmi_hz*1000), 0);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ evntsel |= P6_EVNTSEL0_ENABLE;
+ wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
+}
+
+static int setup_p4_watchdog(void)
+{
+ unsigned int misc_enable, dummy;
+
+ rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+ return 0;
+
+ nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+ nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+ if (smp_num_siblings == 2)
+ nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+ clear_msr_range(0x3F1, 2);
+ /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+ docs doesn't fully define it, so leave it alone for now. */
+ if (boot_cpu_data.x86_model >= 0x3) {
+ /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+ clear_msr_range(0x3A0, 26);
+ clear_msr_range(0x3BC, 3);
+ } else {
+ clear_msr_range(0x3A0, 31);
+ }
+ clear_msr_range(0x3C0, 6);
+ clear_msr_range(0x3C8, 6);
+ clear_msr_range(0x3E0, 2);
+ clear_msr_range(MSR_P4_CCCR0, 18);
+ clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+ wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+ wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+ Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
+ wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ return 1;
+}
+
+void setup_apic_nmi_watchdog (void)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
+ return;
+ setup_k7_watchdog();
+ break;
+ case X86_VENDOR_INTEL:
+ switch (boot_cpu_data.x86) {
+ case 6:
+ if (boot_cpu_data.x86_model > 0xd)
+ return;
+
+ setup_p6_watchdog();
+ break;
+ case 15:
+ if (boot_cpu_data.x86_model > 0x3)
+ return;
+
+ if (!setup_p4_watchdog())
+ return;
+ break;
+ default:
+ return;
+ }
+ break;
+ default:
+ return;
+ }
+ lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
+ nmi_active = 1;
+}
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check it's local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ * here too!]
+ */
+
+static unsigned int
+ last_irq_sums [NR_CPUS],
+ alert_counter [NR_CPUS];
+
+void touch_nmi_watchdog (void)
+{
+ int i;
+
+ /*
+ * Just reset the alert counters, (other CPUs might be
+ * spinning on locks we hold):
+ */
+ for (i = 0; i < NR_CPUS; i++)
+ alert_counter[i] = 0;
+}
+
+extern void die_nmi(struct pt_regs *, const char *msg);
+
+void nmi_watchdog_tick (struct pt_regs * regs)
+{
+
+ /*
+ * Since current_thread_info()-> is always on the stack, and we
+ * always switch the stack NMI-atomically, it's safe to use
+ * smp_processor_id().
+ */
+ int sum, cpu = smp_processor_id();
+
+ sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
+
+ if (last_irq_sums[cpu] == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ alert_counter[cpu]++;
+ if (alert_counter[cpu] == 5*nmi_hz)
+ die_nmi(regs, "NMI Watchdog detected LOCKUP");
+ } else {
+ last_irq_sums[cpu] = sum;
+ alert_counter[cpu] = 0;
+ }
+ if (nmi_perfctr_msr) {
+ if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+ /*
+ * P4 quirks:
+ * - An overflown perfctr will assert its interrupt
+ * until the OVF flag in its CCCR is cleared.
+ * - LVTPC is masked on interrupt and must be
+ * unmasked by the LVTPC handler.
+ */
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ else if (nmi_perfctr_msr == MSR_P6_PERFCTR0) {
+ /* Only P6 based Pentium M need to re-unmask
+ * the apic vector but it doesn't hurt
+ * other P6 variant */
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
+ }
+}
+
+#ifdef CONFIG_SYSCTL
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+ unsigned char reason = get_nmi_reason();
+ char buf[64];
+
+ if (!(reason & 0xc0)) {
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(regs, buf);
+ }
+ return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ */
+int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
+ void __user *buffer, size_t *length, loff_t *ppos)
+{
+ int old_state;
+
+ old_state = unknown_nmi_panic;
+ proc_dointvec(table, write, file, buffer, length, ppos);
+ if (!!old_state == !!unknown_nmi_panic)
+ return 0;
+
+ if (unknown_nmi_panic) {
+ if (reserve_lapic_nmi() < 0) {
+ unknown_nmi_panic = 0;
+ return -EBUSY;
+ } else {
+ set_nmi_callback(unknown_nmi_panic_callback);
+ }
+ } else {
+ release_lapic_nmi();
+ unset_nmi_callback();
+ }
+ return 0;
+}
+
+#endif
+
+EXPORT_SYMBOL(nmi_active);
+EXPORT_SYMBOL(nmi_watchdog);
+EXPORT_SYMBOL(reserve_lapic_nmi);
+EXPORT_SYMBOL(release_lapic_nmi);
+EXPORT_SYMBOL(disable_timer_nmi_watchdog);
+EXPORT_SYMBOL(enable_timer_nmi_watchdog);
diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c
new file mode 100644
index 0000000..e51edf0
--- /dev/null
+++ b/arch/i386/kernel/numaq.c
@@ -0,0 +1,79 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <asm/numaq.h>
+#include <asm/topology.h>
+
+#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table. This
+ * function also updates node_online_map with the nodes (quads) present.
+ */
+static void __init smp_dump_qct(void)
+{
+ int node;
+ struct eachquadmem *eq;
+ struct sys_cfg_data *scd =
+ (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+ nodes_clear(node_online_map);
+ for_each_node(node) {
+ if (scd->quads_present31_0 & (1 << node)) {
+ node_set_online(node);
+ eq = &scd->eq[node];
+ /* Convert to pages */
+ node_start_pfn[node] = MB_TO_PAGES(
+ eq->hi_shrd_mem_start - eq->priv_mem_size);
+ node_end_pfn[node] = MB_TO_PAGES(
+ eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+
+ memory_present(node,
+ node_start_pfn[node], node_end_pfn[node]);
+ node_remap_size[node] = node_memmap_size_bytes(node,
+ node_start_pfn[node],
+ node_end_pfn[node]);
+ }
+ }
+}
+
+/*
+ * Unlike Summit, we don't really care to let the NUMA-Q
+ * fall back to flat mode. Don't compile for NUMA-Q
+ * unless you really need it!
+ */
+int __init get_memcfg_numaq(void)
+{
+ smp_dump_qct();
+ return 1;
+}
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c
new file mode 100644
index 0000000..4de2e03
--- /dev/null
+++ b/arch/i386/kernel/pci-dma.c
@@ -0,0 +1,147 @@
+/*
+ * Dynamic DMA mapping support.
+ *
+ * On i386 there is no hardware dynamic DMA address translation,
+ * so consistent alloc/free are merely page allocation/freeing.
+ * The rest of the dynamic DMA mapping interface is implemented
+ * in asm/pci.h.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+struct dma_coherent_mem {
+ void *virt_base;
+ u32 device_base;
+ int size;
+ int flags;
+ unsigned long *bitmap;
+};
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, unsigned int __nocast gfp)
+{
+ void *ret;
+ struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+ int order = get_order(size);
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (mem) {
+ int page = bitmap_find_free_region(mem->bitmap, mem->size,
+ order);
+ if (page >= 0) {
+ *dma_handle = mem->device_base + (page << PAGE_SHIFT);
+ ret = mem->virt_base + (page << PAGE_SHIFT);
+ memset(ret, 0, size);
+ return ret;
+ }
+ if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+ return NULL;
+ }
+
+ if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+ gfp |= GFP_DMA;
+
+ ret = (void *)__get_free_pages(gfp, order);
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+ return ret;
+}
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+ int order = get_order(size);
+
+ if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+ int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+ bitmap_release_region(mem->bitmap, page, order);
+ } else
+ free_pages((unsigned long)vaddr, order);
+}
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+ dma_addr_t device_addr, size_t size, int flags)
+{
+ void __iomem *mem_base;
+ int pages = size >> PAGE_SHIFT;
+ int bitmap_size = (pages + 31)/32;
+
+ if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+ goto out;
+ if (!size)
+ goto out;
+ if (dev->dma_mem)
+ goto out;
+
+ /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+ mem_base = ioremap(bus_addr, size);
+ if (!mem_base)
+ goto out;
+
+ dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+ if (!dev->dma_mem)
+ goto out;
+ memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem));
+ dev->dma_mem->bitmap = kmalloc(bitmap_size, GFP_KERNEL);
+ if (!dev->dma_mem->bitmap)
+ goto free1_out;
+ memset(dev->dma_mem->bitmap, 0, bitmap_size);
+
+ dev->dma_mem->virt_base = mem_base;
+ dev->dma_mem->device_base = device_addr;
+ dev->dma_mem->size = pages;
+ dev->dma_mem->flags = flags;
+
+ if (flags & DMA_MEMORY_MAP)
+ return DMA_MEMORY_MAP;
+
+ return DMA_MEMORY_IO;
+
+ free1_out:
+ kfree(dev->dma_mem->bitmap);
+ out:
+ return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+ struct dma_coherent_mem *mem = dev->dma_mem;
+
+ if(!mem)
+ return;
+ dev->dma_mem = NULL;
+ iounmap(mem->virt_base);
+ kfree(mem->bitmap);
+ kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+ dma_addr_t device_addr, size_t size)
+{
+ struct dma_coherent_mem *mem = dev->dma_mem;
+ int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ int pos, err;
+
+ if (!mem)
+ return ERR_PTR(-EINVAL);
+
+ pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+ err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+ if (err != 0)
+ return ERR_PTR(err);
+ return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
new file mode 100644
index 0000000..c36fedf
--- /dev/null
+++ b/arch/i386/kernel/process.c
@@ -0,0 +1,848 @@
+/*
+ * linux/arch/i386/kernel/process.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <stdarg.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/elfcore.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/utsname.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/ptrace.h>
+#include <linux/random.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/ldt.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/irq.h>
+#include <asm/desc.h>
+#ifdef CONFIG_MATH_EMULATION
+#include <asm/math_emu.h>
+#endif
+
+#include <linux/irq.h>
+#include <linux/err.h>
+
+asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+
+static int hlt_counter;
+
+unsigned long boot_option_idle_override = 0;
+EXPORT_SYMBOL(boot_option_idle_override);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((unsigned long *)tsk->thread.esp)[3];
+}
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void);
+static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
+
+void disable_hlt(void)
+{
+ hlt_counter++;
+}
+
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+ hlt_counter--;
+}
+
+EXPORT_SYMBOL(enable_hlt);
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+ if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
+ local_irq_disable();
+ if (!need_resched())
+ safe_halt();
+ else
+ local_irq_enable();
+ } else {
+ cpu_relax();
+ }
+}
+
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle (void)
+{
+ int oldval;
+
+ local_irq_enable();
+
+ /*
+ * Deal with another CPU just having chosen a thread to
+ * run here:
+ */
+ oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
+
+ if (!oldval) {
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ asm volatile(
+ "2:"
+ "testl %0, %1;"
+ "rep; nop;"
+ "je 2b;"
+ : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
+
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ } else {
+ set_need_resched();
+ }
+}
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle (void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ while (!need_resched()) {
+ void (*idle)(void);
+
+ if (__get_cpu_var(cpu_idle_state))
+ __get_cpu_var(cpu_idle_state) = 0;
+
+ rmb();
+ idle = pm_idle;
+
+ if (!idle)
+ idle = default_idle;
+
+ __get_cpu_var(irq_stat).idle_timestamp = jiffies;
+ idle();
+ }
+ schedule();
+ }
+}
+
+void cpu_idle_wait(void)
+{
+ unsigned int cpu, this_cpu = get_cpu();
+ cpumask_t map;
+
+ set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
+ put_cpu();
+
+ cpus_clear(map);
+ for_each_online_cpu(cpu) {
+ per_cpu(cpu_idle_state, cpu) = 1;
+ cpu_set(cpu, map);
+ }
+
+ __get_cpu_var(cpu_idle_state) = 0;
+
+ wmb();
+ do {
+ ssleep(1);
+ for_each_online_cpu(cpu) {
+ if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
+ cpu_clear(cpu, map);
+ }
+ cpus_and(map, map, cpu_online_map);
+ } while (!cpus_empty(map));
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
+/*
+ * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
+ * which can obviate IPI to trigger checking of need_resched.
+ * We execute MONITOR against need_resched and enter optimized wait state
+ * through MWAIT. Whenever someone changes need_resched, we would be woken
+ * up from MWAIT (without an IPI).
+ */
+static void mwait_idle(void)
+{
+ local_irq_enable();
+
+ if (!need_resched()) {
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ do {
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ if (need_resched())
+ break;
+ __mwait(0, 0);
+ } while (!need_resched());
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ }
+}
+
+void __init select_idle_routine(const struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_MWAIT)) {
+ printk("monitor/mwait feature present.\n");
+ /*
+ * Skip, if setup has overridden idle.
+ * One CPU supports mwait => All CPUs supports mwait
+ */
+ if (!pm_idle) {
+ printk("using mwait in idle threads.\n");
+ pm_idle = mwait_idle;
+ }
+ }
+}
+
+static int __init idle_setup (char *str)
+{
+ if (!strncmp(str, "poll", 4)) {
+ printk("using polling idle threads.\n");
+ pm_idle = poll_idle;
+#ifdef CONFIG_X86_SMP
+ if (smp_num_siblings > 1)
+ printk("WARNING: polling idle and HT enabled, performance may degrade.\n");
+#endif
+ } else if (!strncmp(str, "halt", 4)) {
+ printk("using halt in idle threads.\n");
+ pm_idle = default_idle;
+ }
+
+ boot_option_idle_override = 1;
+ return 1;
+}
+
+__setup("idle=", idle_setup);
+
+void show_regs(struct pt_regs * regs)
+{
+ unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+
+ printk("\n");
+ printk("Pid: %d, comm: %20s\n", current->pid, current->comm);
+ printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id());
+ print_symbol("EIP is at %s\n", regs->eip);
+
+ if (regs->xcs & 3)
+ printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp);
+ printk(" EFLAGS: %08lx %s (%s)\n",
+ regs->eflags, print_tainted(), system_utsname.release);
+ printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+ regs->eax,regs->ebx,regs->ecx,regs->edx);
+ printk("ESI: %08lx EDI: %08lx EBP: %08lx",
+ regs->esi, regs->edi, regs->ebp);
+ printk(" DS: %04x ES: %04x\n",
+ 0xffff & regs->xds,0xffff & regs->xes);
+
+ __asm__("movl %%cr0, %0": "=r" (cr0));
+ __asm__("movl %%cr2, %0": "=r" (cr2));
+ __asm__("movl %%cr3, %0": "=r" (cr3));
+ /* This could fault if %cr4 does not exist */
+ __asm__("1: movl %%cr4, %0 \n"
+ "2: \n"
+ ".section __ex_table,\"a\" \n"
+ ".long 1b,2b \n"
+ ".previous \n"
+ : "=r" (cr4): "0" (0));
+ printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4);
+ show_trace(NULL, ®s->esp);
+}
+
+/*
+ * This gets run with %ebx containing the
+ * function to call, and %edx containing
+ * the "args".
+ */
+extern void kernel_thread_helper(void);
+__asm__(".section .text\n"
+ ".align 4\n"
+ "kernel_thread_helper:\n\t"
+ "movl %edx,%eax\n\t"
+ "pushl %edx\n\t"
+ "call *%ebx\n\t"
+ "pushl %eax\n\t"
+ "call do_exit\n"
+ ".previous");
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+
+ regs.ebx = (unsigned long) fn;
+ regs.edx = (unsigned long) arg;
+
+ regs.xds = __USER_DS;
+ regs.xes = __USER_DS;
+ regs.orig_eax = -1;
+ regs.eip = (unsigned long) kernel_thread_helper;
+ regs.xcs = __KERNEL_CS;
+ regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2;
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ struct task_struct *tsk = current;
+ struct thread_struct *t = &tsk->thread;
+
+ /* The process may have allocated an io port bitmap... nuke it. */
+ if (unlikely(NULL != t->io_bitmap_ptr)) {
+ int cpu = get_cpu();
+ struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+ kfree(t->io_bitmap_ptr);
+ t->io_bitmap_ptr = NULL;
+ /*
+ * Careful, clear this in the TSS too:
+ */
+ memset(tss->io_bitmap, 0xff, tss->io_bitmap_max);
+ t->io_bitmap_max = 0;
+ tss->io_bitmap_owner = NULL;
+ tss->io_bitmap_max = 0;
+ tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
+ put_cpu();
+ }
+}
+
+void flush_thread(void)
+{
+ struct task_struct *tsk = current;
+
+ memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
+ memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+ /*
+ * Forget coprocessor state..
+ */
+ clear_fpu(tsk);
+ clear_used_math();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+ if (dead_task->mm) {
+ // temporary debugging check
+ if (dead_task->mm->context.size) {
+ printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
+ dead_task->comm,
+ dead_task->mm->context.ldt,
+ dead_task->mm->context.size);
+ BUG();
+ }
+ }
+
+ release_vm86_irqs(dead_task);
+}
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ unlazy_fpu(tsk);
+}
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
+ unsigned long unused,
+ struct task_struct * p, struct pt_regs * regs)
+{
+ struct pt_regs * childregs;
+ struct task_struct *tsk;
+ int err;
+
+ childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1;
+ *childregs = *regs;
+ childregs->eax = 0;
+ childregs->esp = esp;
+
+ p->thread.esp = (unsigned long) childregs;
+ p->thread.esp0 = (unsigned long) (childregs+1);
+
+ p->thread.eip = (unsigned long) ret_from_fork;
+
+ savesegment(fs,p->thread.fs);
+ savesegment(gs,p->thread.gs);
+
+ tsk = current;
+ if (unlikely(NULL != tsk->thread.io_bitmap_ptr)) {
+ p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+ if (!p->thread.io_bitmap_ptr) {
+ p->thread.io_bitmap_max = 0;
+ return -ENOMEM;
+ }
+ memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr,
+ IO_BITMAP_BYTES);
+ }
+
+ /*
+ * Set a new TLS for the child thread?
+ */
+ if (clone_flags & CLONE_SETTLS) {
+ struct desc_struct *desc;
+ struct user_desc info;
+ int idx;
+
+ err = -EFAULT;
+ if (copy_from_user(&info, (void __user *)childregs->esi, sizeof(info)))
+ goto out;
+ err = -EINVAL;
+ if (LDT_empty(&info))
+ goto out;
+
+ idx = info.entry_number;
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ goto out;
+
+ desc = p->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+ desc->a = LDT_entry_a(&info);
+ desc->b = LDT_entry_b(&info);
+ }
+
+ err = 0;
+ out:
+ if (err && p->thread.io_bitmap_ptr) {
+ kfree(p->thread.io_bitmap_ptr);
+ p->thread.io_bitmap_max = 0;
+ }
+ return err;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs * regs, struct user * dump)
+{
+ int i;
+
+/* changed the size calculations - should hopefully work better. lbt */
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = regs->esp & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+ for (i = 0; i < 8; i++)
+ dump->u_debugreg[i] = current->thread.debugreg[i];
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->regs.ebx = regs->ebx;
+ dump->regs.ecx = regs->ecx;
+ dump->regs.edx = regs->edx;
+ dump->regs.esi = regs->esi;
+ dump->regs.edi = regs->edi;
+ dump->regs.ebp = regs->ebp;
+ dump->regs.eax = regs->eax;
+ dump->regs.ds = regs->xds;
+ dump->regs.es = regs->xes;
+ savesegment(fs,dump->regs.fs);
+ savesegment(gs,dump->regs.gs);
+ dump->regs.orig_eax = regs->orig_eax;
+ dump->regs.eip = regs->eip;
+ dump->regs.cs = regs->xcs;
+ dump->regs.eflags = regs->eflags;
+ dump->regs.esp = regs->esp;
+ dump->regs.ss = regs->xss;
+
+ dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+}
+
+/*
+ * Capture the user space registers if the task is not running (in user space)
+ */
+int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+ struct pt_regs ptregs;
+
+ ptregs = *(struct pt_regs *)
+ ((unsigned long)tsk->thread_info+THREAD_SIZE - sizeof(ptregs));
+ ptregs.xcs &= 0xffff;
+ ptregs.xds &= 0xffff;
+ ptregs.xes &= 0xffff;
+ ptregs.xss &= 0xffff;
+
+ elf_core_copy_regs(regs, &ptregs);
+
+ return 1;
+}
+
+static inline void
+handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
+{
+ if (!next->io_bitmap_ptr) {
+ /*
+ * Disable the bitmap via an invalid offset. We still cache
+ * the previous bitmap owner and the IO bitmap contents:
+ */
+ tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
+ return;
+ }
+ if (likely(next == tss->io_bitmap_owner)) {
+ /*
+ * Previous owner of the bitmap (hence the bitmap content)
+ * matches the next task, we dont have to do anything but
+ * to set a valid offset in the TSS:
+ */
+ tss->io_bitmap_base = IO_BITMAP_OFFSET;
+ return;
+ }
+ /*
+ * Lazy TSS's I/O bitmap copy. We set an invalid offset here
+ * and we let the task to get a GPF in case an I/O instruction
+ * is performed. The handler of the GPF will verify that the
+ * faulting task has a valid I/O bitmap and, it true, does the
+ * real copy and restart the instruction. This will save us
+ * redundant copies when the currently switched task does not
+ * perform any I/O during its timeslice.
+ */
+ tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+}
+/*
+ * This special macro can be used to load a debugging register
+ */
+#define loaddebug(thread,register) \
+ __asm__("movl %0,%%db" #register \
+ : /* no output */ \
+ :"r" (thread->debugreg[register]))
+
+/*
+ * switch_to(x,yn) should switch tasks from x to y.
+ *
+ * We fsave/fwait so that an exception goes off at the right time
+ * (as a call from the fsave or fwait in effect) rather than to
+ * the wrong process. Lazy FP saving no longer makes any sense
+ * with modern CPU's, and this simplifies a lot of things (SMP
+ * and UP become the same).
+ *
+ * NOTE! We used to use the x86 hardware context switching. The
+ * reason for not using it any more becomes apparent when you
+ * try to recover gracefully from saved state that is no longer
+ * valid (stale segment register values in particular). With the
+ * hardware task-switch, there is no way to fix up bad state in
+ * a reasonable manner.
+ *
+ * The fact that Intel documents the hardware task-switching to
+ * be slow is a fairly red herring - this code is not noticeably
+ * faster. However, there _is_ some room for improvement here,
+ * so the performance issues may eventually be a valid point.
+ * More important, however, is the fact that this allows us much
+ * more flexibility.
+ *
+ * The return value (in %eax) will be the "prev" task after
+ * the task-switch, and shows up in ret_from_fork in entry.S,
+ * for example.
+ */
+struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
+{
+ struct thread_struct *prev = &prev_p->thread,
+ *next = &next_p->thread;
+ int cpu = smp_processor_id();
+ struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+ /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
+
+ __unlazy_fpu(prev_p);
+
+ /*
+ * Reload esp0, LDT and the page table pointer:
+ */
+ load_esp0(tss, next);
+
+ /*
+ * Load the per-thread Thread-Local Storage descriptor.
+ */
+ load_TLS(next, cpu);
+
+ /*
+ * Save away %fs and %gs. No need to save %es and %ds, as
+ * those are always kernel segments while inside the kernel.
+ */
+ asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs));
+ asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs));
+
+ /*
+ * Restore %fs and %gs if needed.
+ */
+ if (unlikely(prev->fs | prev->gs | next->fs | next->gs)) {
+ loadsegment(fs, next->fs);
+ loadsegment(gs, next->gs);
+ }
+
+ /*
+ * Now maybe reload the debug registers
+ */
+ if (unlikely(next->debugreg[7])) {
+ loaddebug(next, 0);
+ loaddebug(next, 1);
+ loaddebug(next, 2);
+ loaddebug(next, 3);
+ /* no 4 and 5 */
+ loaddebug(next, 6);
+ loaddebug(next, 7);
+ }
+
+ if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr))
+ handle_io_bitmap(next, tss);
+
+ return prev_p;
+}
+
+asmlinkage int sys_fork(struct pt_regs regs)
+{
+ return do_fork(SIGCHLD, regs.esp, ®s, 0, NULL, NULL);
+}
+
+asmlinkage int sys_clone(struct pt_regs regs)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+ int __user *parent_tidptr, *child_tidptr;
+
+ clone_flags = regs.ebx;
+ newsp = regs.ecx;
+ parent_tidptr = (int __user *)regs.edx;
+ child_tidptr = (int __user *)regs.edi;
+ if (!newsp)
+ newsp = regs.esp;
+ return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+asmlinkage int sys_vfork(struct pt_regs regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.esp, ®s, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(struct pt_regs regs)
+{
+ int error;
+ char * filename;
+
+ filename = getname((char __user *) regs.ebx);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename,
+ (char __user * __user *) regs.ecx,
+ (char __user * __user *) regs.edx,
+ ®s);
+ if (error == 0) {
+ task_lock(current);
+ current->ptrace &= ~PT_DTRACE;
+ task_unlock(current);
+ /* Make sure we don't return using sysenter.. */
+ set_thread_flag(TIF_IRET);
+ }
+ putname(filename);
+out:
+ return error;
+}
+
+#define top_esp (THREAD_SIZE - sizeof(unsigned long))
+#define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long))
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long ebp, esp, eip;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+ stack_page = (unsigned long)p->thread_info;
+ esp = p->thread.esp;
+ if (!stack_page || esp < stack_page || esp > top_esp+stack_page)
+ return 0;
+ /* include/asm-i386/system.h:switch_to() pushes ebp last. */
+ ebp = *(unsigned long *) esp;
+ do {
+ if (ebp < stack_page || ebp > top_ebp+stack_page)
+ return 0;
+ eip = *(unsigned long *) (ebp+4);
+ if (!in_sched_functions(eip))
+ return eip;
+ ebp = *(unsigned long *) ebp;
+ } while (count++ < 16);
+ return 0;
+}
+
+/*
+ * sys_alloc_thread_area: get a yet unused TLS descriptor index.
+ */
+static int get_free_idx(void)
+{
+ struct thread_struct *t = ¤t->thread;
+ int idx;
+
+ for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
+ if (desc_empty(t->tls_array + idx))
+ return idx + GDT_ENTRY_TLS_MIN;
+ return -ESRCH;
+}
+
+/*
+ * Set a given TLS descriptor:
+ */
+asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
+{
+ struct thread_struct *t = ¤t->thread;
+ struct user_desc info;
+ struct desc_struct *desc;
+ int cpu, idx;
+
+ if (copy_from_user(&info, u_info, sizeof(info)))
+ return -EFAULT;
+ idx = info.entry_number;
+
+ /*
+ * index -1 means the kernel should try to find and
+ * allocate an empty descriptor:
+ */
+ if (idx == -1) {
+ idx = get_free_idx();
+ if (idx < 0)
+ return idx;
+ if (put_user(idx, &u_info->entry_number))
+ return -EFAULT;
+ }
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+ /*
+ * We must not get preempted while modifying the TLS.
+ */
+ cpu = get_cpu();
+
+ if (LDT_empty(&info)) {
+ desc->a = 0;
+ desc->b = 0;
+ } else {
+ desc->a = LDT_entry_a(&info);
+ desc->b = LDT_entry_b(&info);
+ }
+ load_TLS(t, cpu);
+
+ put_cpu();
+
+ return 0;
+}
+
+/*
+ * Get the current Thread-Local Storage area:
+ */
+
+#define GET_BASE(desc) ( \
+ (((desc)->a >> 16) & 0x0000ffff) | \
+ (((desc)->b << 16) & 0x00ff0000) | \
+ ( (desc)->b & 0xff000000) )
+
+#define GET_LIMIT(desc) ( \
+ ((desc)->a & 0x0ffff) | \
+ ((desc)->b & 0xf0000) )
+
+#define GET_32BIT(desc) (((desc)->b >> 22) & 1)
+#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3)
+#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1)
+#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1)
+#define GET_PRESENT(desc) (((desc)->b >> 15) & 1)
+#define GET_USEABLE(desc) (((desc)->b >> 20) & 1)
+
+asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
+{
+ struct user_desc info;
+ struct desc_struct *desc;
+ int idx;
+
+ if (get_user(idx, &u_info->entry_number))
+ return -EFAULT;
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+ info.entry_number = idx;
+ info.base_addr = GET_BASE(desc);
+ info.limit = GET_LIMIT(desc);
+ info.seg_32bit = GET_32BIT(desc);
+ info.contents = GET_CONTENTS(desc);
+ info.read_exec_only = !GET_WRITABLE(desc);
+ info.limit_in_pages = GET_LIMIT_PAGES(desc);
+ info.seg_not_present = !GET_PRESENT(desc);
+ info.useable = GET_USEABLE(desc);
+
+ if (copy_to_user(u_info, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+ if (randomize_va_space)
+ sp -= get_random_int() % 8192;
+ return sp & ~0xf;
+}
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
new file mode 100644
index 0000000..b2f1764
--- /dev/null
+++ b/arch/i386/kernel/ptrace.c
@@ -0,0 +1,717 @@
+/* ptrace.c */
+/* By Ross Biro 1/23/92 */
+/*
+ * Pentium III FXSR, SSE support
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/debugreg.h>
+#include <asm/ldt.h>
+#include <asm/desc.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* determines which flags the user has access to. */
+/* 1 = access 0 = no access */
+#define FLAG_MASK 0x00044dd5
+
+/* set's the trap flag. */
+#define TRAP_FLAG 0x100
+
+/*
+ * Offset of eflags on child stack..
+ */
+#define EFL_OFFSET ((EFL-2)*4-sizeof(struct pt_regs))
+
+static inline struct pt_regs *get_child_regs(struct task_struct *task)
+{
+ void *stack_top = (void *)task->thread.esp0;
+ return stack_top - sizeof(struct pt_regs);
+}
+
+/*
+ * this routine will get a word off of the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+ unsigned char *stack;
+
+ stack = (unsigned char *)task->thread.esp0;
+ stack += offset;
+ return (*((int *)stack));
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline int put_stack_long(struct task_struct *task, int offset,
+ unsigned long data)
+{
+ unsigned char * stack;
+
+ stack = (unsigned char *) task->thread.esp0;
+ stack += offset;
+ *(unsigned long *) stack = data;
+ return 0;
+}
+
+static int putreg(struct task_struct *child,
+ unsigned long regno, unsigned long value)
+{
+ switch (regno >> 2) {
+ case FS:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ child->thread.fs = value;
+ return 0;
+ case GS:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ child->thread.gs = value;
+ return 0;
+ case DS:
+ case ES:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ value &= 0xffff;
+ break;
+ case SS:
+ case CS:
+ if ((value & 3) != 3)
+ return -EIO;
+ value &= 0xffff;
+ break;
+ case EFL:
+ value &= FLAG_MASK;
+ value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK;
+ break;
+ }
+ if (regno > GS*4)
+ regno -= 2*4;
+ put_stack_long(child, regno - sizeof(struct pt_regs), value);
+ return 0;
+}
+
+static unsigned long getreg(struct task_struct *child,
+ unsigned long regno)
+{
+ unsigned long retval = ~0UL;
+
+ switch (regno >> 2) {
+ case FS:
+ retval = child->thread.fs;
+ break;
+ case GS:
+ retval = child->thread.gs;
+ break;
+ case DS:
+ case ES:
+ case SS:
+ case CS:
+ retval = 0xffff;
+ /* fall through */
+ default:
+ if (regno > GS*4)
+ regno -= 2*4;
+ regno = regno - sizeof(struct pt_regs);
+ retval &= get_stack_long(child, regno);
+ }
+ return retval;
+}
+
+#define LDT_SEGMENT 4
+
+static unsigned long convert_eip_to_linear(struct task_struct *child, struct pt_regs *regs)
+{
+ unsigned long addr, seg;
+
+ addr = regs->eip;
+ seg = regs->xcs & 0xffff;
+ if (regs->eflags & VM_MASK) {
+ addr = (addr & 0xffff) + (seg << 4);
+ return addr;
+ }
+
+ /*
+ * We'll assume that the code segments in the GDT
+ * are all zero-based. That is largely true: the
+ * TLS segments are used for data, and the PNPBIOS
+ * and APM bios ones we just ignore here.
+ */
+ if (seg & LDT_SEGMENT) {
+ u32 *desc;
+ unsigned long base;
+
+ down(&child->mm->context.sem);
+ desc = child->mm->context.ldt + (seg & ~7);
+ base = (desc[0] >> 16) | ((desc[1] & 0xff) << 16) | (desc[1] & 0xff000000);
+
+ /* 16-bit code segment? */
+ if (!((desc[1] >> 22) & 1))
+ addr &= 0xffff;
+ addr += base;
+ up(&child->mm->context.sem);
+ }
+ return addr;
+}
+
+static inline int is_at_popf(struct task_struct *child, struct pt_regs *regs)
+{
+ int i, copied;
+ unsigned char opcode[16];
+ unsigned long addr = convert_eip_to_linear(child, regs);
+
+ copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
+ for (i = 0; i < copied; i++) {
+ switch (opcode[i]) {
+ /* popf */
+ case 0x9d:
+ return 1;
+ /* opcode and address size prefixes */
+ case 0x66: case 0x67:
+ continue;
+ /* irrelevant prefixes (segment overrides and repeats) */
+ case 0x26: case 0x2e:
+ case 0x36: case 0x3e:
+ case 0x64: case 0x65:
+ case 0xf0: case 0xf2: case 0xf3:
+ continue;
+
+ /*
+ * pushf: NOTE! We should probably not let
+ * the user see the TF bit being set. But
+ * it's more pain than it's worth to avoid
+ * it, and a debugger could emulate this
+ * all in user space if it _really_ cares.
+ */
+ case 0x9c:
+ default:
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static void set_singlestep(struct task_struct *child)
+{
+ struct pt_regs *regs = get_child_regs(child);
+
+ /*
+ * Always set TIF_SINGLESTEP - this guarantees that
+ * we single-step system calls etc.. This will also
+ * cause us to set TF when returning to user mode.
+ */
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+ /*
+ * If TF was already set, don't do anything else
+ */
+ if (regs->eflags & TRAP_FLAG)
+ return;
+
+ /* Set TF on the kernel stack.. */
+ regs->eflags |= TRAP_FLAG;
+
+ /*
+ * ..but if TF is changed by the instruction we will trace,
+ * don't mark it as being "us" that set it, so that we
+ * won't clear it by hand later.
+ */
+ if (is_at_popf(child, regs))
+ return;
+
+ child->ptrace |= PT_DTRACE;
+}
+
+static void clear_singlestep(struct task_struct *child)
+{
+ /* Always clear TIF_SINGLESTEP... */
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+ /* But touch TF only if it was set by us.. */
+ if (child->ptrace & PT_DTRACE) {
+ struct pt_regs *regs = get_child_regs(child);
+ regs->eflags &= ~TRAP_FLAG;
+ child->ptrace &= ~PT_DTRACE;
+ }
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ clear_singlestep(child);
+}
+
+/*
+ * Perform get_thread_area on behalf of the traced child.
+ */
+static int
+ptrace_get_thread_area(struct task_struct *child,
+ int idx, struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ struct desc_struct *desc;
+
+/*
+ * Get the current Thread-Local Storage area:
+ */
+
+#define GET_BASE(desc) ( \
+ (((desc)->a >> 16) & 0x0000ffff) | \
+ (((desc)->b << 16) & 0x00ff0000) | \
+ ( (desc)->b & 0xff000000) )
+
+#define GET_LIMIT(desc) ( \
+ ((desc)->a & 0x0ffff) | \
+ ((desc)->b & 0xf0000) )
+
+#define GET_32BIT(desc) (((desc)->b >> 22) & 1)
+#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3)
+#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1)
+#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1)
+#define GET_PRESENT(desc) (((desc)->b >> 15) & 1)
+#define GET_USEABLE(desc) (((desc)->b >> 20) & 1)
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+ info.entry_number = idx;
+ info.base_addr = GET_BASE(desc);
+ info.limit = GET_LIMIT(desc);
+ info.seg_32bit = GET_32BIT(desc);
+ info.contents = GET_CONTENTS(desc);
+ info.read_exec_only = !GET_WRITABLE(desc);
+ info.limit_in_pages = GET_LIMIT_PAGES(desc);
+ info.seg_not_present = !GET_PRESENT(desc);
+ info.useable = GET_USEABLE(desc);
+
+ if (copy_to_user(user_desc, &info, sizeof(info)))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Perform set_thread_area on behalf of the traced child.
+ */
+static int
+ptrace_set_thread_area(struct task_struct *child,
+ int idx, struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ struct desc_struct *desc;
+
+ if (copy_from_user(&info, user_desc, sizeof(info)))
+ return -EFAULT;
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+ if (LDT_empty(&info)) {
+ desc->a = 0;
+ desc->b = 0;
+ } else {
+ desc->a = LDT_entry_a(&info);
+ desc->b = LDT_entry_b(&info);
+ }
+
+ return 0;
+}
+
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+{
+ struct task_struct *child;
+ struct user * dummy = NULL;
+ int i, ret;
+ unsigned long __user *datap = (unsigned long __user *)data;
+
+ lock_kernel();
+ ret = -EPERM;
+ if (request == PTRACE_TRACEME) {
+ /* are we already being traced? */
+ if (current->ptrace & PT_PTRACED)
+ goto out;
+ ret = security_ptrace(current->parent, current);
+ if (ret)
+ goto out;
+ /* set the ptrace bit in the process flags. */
+ current->ptrace |= PT_PTRACED;
+ ret = 0;
+ goto out;
+ }
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+ if (child)
+ get_task_struct(child);
+ read_unlock(&tasklist_lock);
+ if (!child)
+ goto out;
+
+ ret = -EPERM;
+ if (pid == 1) /* you may not mess with init */
+ goto out_tsk;
+
+ if (request == PTRACE_ATTACH) {
+ ret = ptrace_attach(child);
+ goto out_tsk;
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ if (ret < 0)
+ goto out_tsk;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, datap);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ tmp = 0; /* Default return condition */
+ if(addr < FRAME_SIZE*sizeof(long))
+ tmp = getreg(child, addr);
+ if(addr >= (long) &dummy->u_debugreg[0] &&
+ addr <= (long) &dummy->u_debugreg[7]){
+ addr -= (long) &dummy->u_debugreg[0];
+ addr = addr >> 2;
+ tmp = child->thread.debugreg[addr];
+ }
+ ret = put_user(tmp, datap);
+ break;
+ }
+
+ /* when I and D space are separate, this will have to be fixed. */
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ case PTRACE_POKEDATA:
+ ret = 0;
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+ break;
+ ret = -EIO;
+ break;
+
+ case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ if (addr < FRAME_SIZE*sizeof(long)) {
+ ret = putreg(child, addr, data);
+ break;
+ }
+ /* We need to be very careful here. We implicitly
+ want to modify a portion of the task_struct, and we
+ have to be selective about what portions we allow someone
+ to modify. */
+
+ ret = -EIO;
+ if(addr >= (long) &dummy->u_debugreg[0] &&
+ addr <= (long) &dummy->u_debugreg[7]){
+
+ if(addr == (long) &dummy->u_debugreg[4]) break;
+ if(addr == (long) &dummy->u_debugreg[5]) break;
+ if(addr < (long) &dummy->u_debugreg[4] &&
+ ((unsigned long) data) >= TASK_SIZE-3) break;
+
+ /* Sanity-check data. Take one half-byte at once with
+ * check = (val >> (16 + 4*i)) & 0xf. It contains the
+ * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
+ * 2 and 3 are LENi. Given a list of invalid values,
+ * we do mask |= 1 << invalid_value, so that
+ * (mask >> check) & 1 is a correct test for invalid
+ * values.
+ *
+ * R/Wi contains the type of the breakpoint /
+ * watchpoint, LENi contains the length of the watched
+ * data in the watchpoint case.
+ *
+ * The invalid values are:
+ * - LENi == 0x10 (undefined), so mask |= 0x0f00.
+ * - R/Wi == 0x10 (break on I/O reads or writes), so
+ * mask |= 0x4444.
+ * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
+ * 0x1110.
+ *
+ * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
+ *
+ * See the Intel Manual "System Programming Guide",
+ * 15.2.4
+ *
+ * Note that LENi == 0x10 is defined on x86_64 in long
+ * mode (i.e. even for 32-bit userspace software, but
+ * 64-bit kernel), so the x86_64 mask value is 0x5454.
+ * See the AMD manual no. 24593 (AMD64 System
+ * Programming)*/
+
+ if(addr == (long) &dummy->u_debugreg[7]) {
+ data &= ~DR_CONTROL_RESERVED;
+ for(i=0; i<4; i++)
+ if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
+ goto out_tsk;
+ }
+
+ addr -= (long) &dummy->u_debugreg;
+ addr = addr >> 2;
+ child->thread.debugreg[addr] = data;
+ ret = 0;
+ }
+ break;
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+ case PTRACE_CONT: /* restart after signal. */
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ if (request == PTRACE_SYSCALL) {
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+ else {
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+ child->exit_code = data;
+ /* make sure the single step bit is not set. */
+ clear_singlestep(child);
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+/*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL:
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ /* make sure the single step bit is not set. */
+ clear_singlestep(child);
+ wake_up_process(child);
+ break;
+
+ case PTRACE_SINGLESTEP: /* set the trap flag. */
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ set_singlestep(child);
+ child->exit_code = data;
+ /* give it a chance to run. */
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ case PTRACE_DETACH:
+ /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ case PTRACE_GETREGS: { /* Get all gp regs from the child. */
+ if (!access_ok(VERIFY_WRITE, datap, FRAME_SIZE*sizeof(long))) {
+ ret = -EIO;
+ break;
+ }
+ for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
+ __put_user(getreg(child, i), datap);
+ datap++;
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+ unsigned long tmp;
+ if (!access_ok(VERIFY_READ, datap, FRAME_SIZE*sizeof(long))) {
+ ret = -EIO;
+ break;
+ }
+ for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
+ __get_user(tmp, datap);
+ putreg(child, i, tmp);
+ datap++;
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+ if (!access_ok(VERIFY_WRITE, datap,
+ sizeof(struct user_i387_struct))) {
+ ret = -EIO;
+ break;
+ }
+ ret = 0;
+ if (!tsk_used_math(child))
+ init_fpu(child);
+ get_fpregs((struct user_i387_struct __user *)data, child);
+ break;
+ }
+
+ case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+ if (!access_ok(VERIFY_READ, datap,
+ sizeof(struct user_i387_struct))) {
+ ret = -EIO;
+ break;
+ }
+ set_stopped_child_used_math(child);
+ set_fpregs(child, (struct user_i387_struct __user *)data);
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_GETFPXREGS: { /* Get the child extended FPU state. */
+ if (!access_ok(VERIFY_WRITE, datap,
+ sizeof(struct user_fxsr_struct))) {
+ ret = -EIO;
+ break;
+ }
+ if (!tsk_used_math(child))
+ init_fpu(child);
+ ret = get_fpxregs((struct user_fxsr_struct __user *)data, child);
+ break;
+ }
+
+ case PTRACE_SETFPXREGS: { /* Set the child extended FPU state. */
+ if (!access_ok(VERIFY_READ, datap,
+ sizeof(struct user_fxsr_struct))) {
+ ret = -EIO;
+ break;
+ }
+ set_stopped_child_used_math(child);
+ ret = set_fpxregs(child, (struct user_fxsr_struct __user *)data);
+ break;
+ }
+
+ case PTRACE_GET_THREAD_AREA:
+ ret = ptrace_get_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
+ case PTRACE_SET_THREAD_AREA:
+ ret = ptrace_set_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+out_tsk:
+ put_task_struct(child);
+out:
+ unlock_kernel();
+ return ret;
+}
+
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+{
+ struct siginfo info;
+
+ tsk->thread.trap_no = 1;
+ tsk->thread.error_code = error_code;
+
+ memset(&info, 0, sizeof(info));
+ info.si_signo = SIGTRAP;
+ info.si_code = TRAP_BRKPT;
+
+ /* User-mode eip? */
+ info.si_addr = user_mode(regs) ? (void __user *) regs->eip : NULL;
+
+ /* Send us the fakey SIGTRAP */
+ force_sig_info(SIGTRAP, &info, tsk);
+}
+
+/* notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+__attribute__((regparm(3)))
+void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+ /* do the secure computing check first */
+ secure_computing(regs->orig_eax);
+
+ if (unlikely(current->audit_context)) {
+ if (!entryexit)
+ audit_syscall_entry(current, regs->orig_eax,
+ regs->ebx, regs->ecx,
+ regs->edx, regs->esi);
+ else
+ audit_syscall_exit(current, regs->eax);
+ }
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* Fake a debug trap */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ send_sigtrap(current, regs, 0);
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c
new file mode 100644
index 0000000..aaf89cb
--- /dev/null
+++ b/arch/i386/kernel/quirks.c
@@ -0,0 +1,52 @@
+/*
+ * This file contains work-arounds for x86 and x86_64 platform bugs.
+ */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
+
+static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
+{
+ u8 config, rev;
+ u32 word;
+
+ /* BIOS may enable hardware IRQ balancing for
+ * E7520/E7320/E7525(revision ID 0x9 and below)
+ * based platforms.
+ * Disable SW irqbalance/affinity on those platforms.
+ */
+ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
+ if (rev > 0x9)
+ return;
+
+ printk(KERN_INFO "Intel E7520/7320/7525 detected.");
+
+ /* enable access to config space*/
+ pci_read_config_byte(dev, 0xf4, &config);
+ config |= 0x2;
+ pci_write_config_byte(dev, 0xf4, config);
+
+ /* read xTPR register */
+ raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
+
+ if (!(word & (1 << 13))) {
+ printk(KERN_INFO "Disabling irq balancing and affinity\n");
+#ifdef CONFIG_IRQBALANCE
+ irqbalance_disable("");
+#endif
+ noirqdebug_setup("");
+#ifdef CONFIG_PROC_FS
+ no_irq_affinity = 1;
+#endif
+ }
+
+ config &= ~0x2;
+ /* disable access to config space*/
+ pci_write_config_byte(dev, 0xf4, config);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
+#endif
diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c
new file mode 100644
index 0000000..3d7e994
--- /dev/null
+++ b/arch/i386/kernel/reboot.c
@@ -0,0 +1,382 @@
+/*
+ * linux/arch/i386/kernel/reboot.c
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/efi.h>
+#include <linux/dmi.h>
+#include <asm/uaccess.h>
+#include <asm/apic.h>
+#include "mach_reboot.h"
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void);
+
+static int reboot_mode;
+static int reboot_thru_bios;
+
+#ifdef CONFIG_SMP
+int reboot_smp = 0;
+static int reboot_cpu = -1;
+/* shamelessly grabbed from lib/vsprintf.c for readability */
+#define is_digit(c) ((c) >= '0' && (c) <= '9')
+#endif
+static int __init reboot_setup(char *str)
+{
+ while(1) {
+ switch (*str) {
+ case 'w': /* "warm" reboot (no memory testing etc) */
+ reboot_mode = 0x1234;
+ break;
+ case 'c': /* "cold" reboot (with memory testing etc) */
+ reboot_mode = 0x0;
+ break;
+ case 'b': /* "bios" reboot by jumping through the BIOS */
+ reboot_thru_bios = 1;
+ break;
+ case 'h': /* "hard" reboot by toggling RESET and/or crashing the CPU */
+ reboot_thru_bios = 0;
+ break;
+#ifdef CONFIG_SMP
+ case 's': /* "smp" reboot by executing reset on BSP or other CPU*/
+ reboot_smp = 1;
+ if (is_digit(*(str+1))) {
+ reboot_cpu = (int) (*(str+1) - '0');
+ if (is_digit(*(str+2)))
+ reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
+ }
+ /* we will leave sorting out the final value
+ when we are ready to reboot, since we might not
+ have set up boot_cpu_id or smp_num_cpu */
+ break;
+#endif
+ }
+ if((str = strchr(str,',')) != NULL)
+ str++;
+ else
+ break;
+ }
+ return 1;
+}
+
+__setup("reboot=", reboot_setup);
+
+/*
+ * Reboot options and system auto-detection code provided by
+ * Dell Inc. so their systems "just work". :-)
+ */
+
+/*
+ * Some machines require the "reboot=b" commandline option, this quirk makes that automatic.
+ */
+static int __init set_bios_reboot(struct dmi_system_id *d)
+{
+ if (!reboot_thru_bios) {
+ reboot_thru_bios = 1;
+ printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident);
+ }
+ return 0;
+}
+
+/*
+ * Some machines require the "reboot=s" commandline option, this quirk makes that automatic.
+ */
+static int __init set_smp_reboot(struct dmi_system_id *d)
+{
+#ifdef CONFIG_SMP
+ if (!reboot_smp) {
+ reboot_smp = 1;
+ printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident);
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Some machines require the "reboot=b,s" commandline option, this quirk makes that automatic.
+ */
+static int __init set_smp_bios_reboot(struct dmi_system_id *d)
+{
+ set_smp_reboot(d);
+ set_bios_reboot(d);
+ return 0;
+}
+
+static struct dmi_system_id __initdata reboot_dmi_table[] = {
+ { /* Handle problems with rebooting on Dell 1300's */
+ .callback = set_smp_bios_reboot,
+ .ident = "Dell PowerEdge 1300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"),
+ },
+ },
+ { /* Handle problems with rebooting on Dell 300's */
+ .callback = set_bios_reboot,
+ .ident = "Dell PowerEdge 300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
+ },
+ },
+ { /* Handle problems with rebooting on Dell 2400's */
+ .callback = set_bios_reboot,
+ .ident = "Dell PowerEdge 2400",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
+ },
+ },
+ { }
+};
+
+static int __init reboot_init(void)
+{
+ dmi_check_system(reboot_dmi_table);
+ return 0;
+}
+
+core_initcall(reboot_init);
+
+/* The following code and data reboots the machine by switching to real
+ mode and jumping to the BIOS reset entry point, as if the CPU has
+ really been reset. The previous version asked the keyboard
+ controller to pulse the CPU reset line, which is more thorough, but
+ doesn't work with at least one type of 486 motherboard. It is easy
+ to stop this code working; hence the copious comments. */
+
+static unsigned long long
+real_mode_gdt_entries [3] =
+{
+ 0x0000000000000000ULL, /* Null descriptor */
+ 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */
+ 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */
+};
+
+static struct
+{
+ unsigned short size __attribute__ ((packed));
+ unsigned long long * base __attribute__ ((packed));
+}
+real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, real_mode_gdt_entries },
+real_mode_idt = { 0x3ff, NULL },
+no_idt = { 0, NULL };
+
+
+/* This is 16-bit protected mode code to disable paging and the cache,
+ switch to real mode and jump to the BIOS reset code.
+
+ The instruction that switches to real mode by writing to CR0 must be
+ followed immediately by a far jump instruction, which set CS to a
+ valid value for real mode, and flushes the prefetch queue to avoid
+ running instructions that have already been decoded in protected
+ mode.
+
+ Clears all the flags except ET, especially PG (paging), PE
+ (protected-mode enable) and TS (task switch for coprocessor state
+ save). Flushes the TLB after paging has been disabled. Sets CD and
+ NW, to disable the cache on a 486, and invalidates the cache. This
+ is more like the state of a 486 after reset. I don't know if
+ something else should be done for other chips.
+
+ More could be done here to set up the registers as if a CPU reset had
+ occurred; hopefully real BIOSs don't assume much. */
+
+static unsigned char real_mode_switch [] =
+{
+ 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */
+ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */
+ 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000,%eax */
+ 0x66, 0x0f, 0x22, 0xc0, /* movl %eax,%cr0 */
+ 0x66, 0x0f, 0x22, 0xd8, /* movl %eax,%cr3 */
+ 0x66, 0x0f, 0x20, 0xc3, /* movl %cr0,%ebx */
+ 0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60, /* andl $0x60000000,%ebx */
+ 0x74, 0x02, /* jz f */
+ 0x0f, 0x09, /* wbinvd */
+ 0x24, 0x10, /* f: andb $0x10,al */
+ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */
+};
+static unsigned char jump_to_bios [] =
+{
+ 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */
+};
+
+/*
+ * Switch to real mode and then execute the code
+ * specified by the code and length parameters.
+ * We assume that length will aways be less that 100!
+ */
+void machine_real_restart(unsigned char *code, int length)
+{
+ unsigned long flags;
+
+ local_irq_disable();
+
+ /* Write zero to CMOS register number 0x0f, which the BIOS POST
+ routine will recognize as telling it to do a proper reboot. (Well
+ that's what this book in front of me says -- it may only apply to
+ the Phoenix BIOS though, it's not clear). At the same time,
+ disable NMIs by setting the top bit in the CMOS address register,
+ as we're about to do peculiar things to the CPU. I'm not sure if
+ `outb_p' is needed instead of just `outb'. Use it to be on the
+ safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.)
+ */
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ CMOS_WRITE(0x00, 0x8f);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ /* Remap the kernel at virtual address zero, as well as offset zero
+ from the kernel segment. This assumes the kernel segment starts at
+ virtual address PAGE_OFFSET. */
+
+ memcpy (swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+ sizeof (swapper_pg_dir [0]) * KERNEL_PGD_PTRS);
+
+ /*
+ * Use `swapper_pg_dir' as our page directory.
+ */
+ load_cr3(swapper_pg_dir);
+
+ /* Write 0x1234 to absolute memory location 0x472. The BIOS reads
+ this on booting to tell it to "Bypass memory test (also warm
+ boot)". This seems like a fairly standard thing that gets set by
+ REBOOT.COM programs, and the previous reset routine did this
+ too. */
+
+ *((unsigned short *)0x472) = reboot_mode;
+
+ /* For the switch to real mode, copy some code to low memory. It has
+ to be in the first 64k because it is running in 16-bit mode, and it
+ has to have the same physical and virtual address, because it turns
+ off paging. Copy it near the end of the first page, out of the way
+ of BIOS variables. */
+
+ memcpy ((void *) (0x1000 - sizeof (real_mode_switch) - 100),
+ real_mode_switch, sizeof (real_mode_switch));
+ memcpy ((void *) (0x1000 - 100), code, length);
+
+ /* Set up the IDT for real mode. */
+
+ __asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt));
+
+ /* Set up a GDT from which we can load segment descriptors for real
+ mode. The GDT is not used in real mode; it is just needed here to
+ prepare the descriptors. */
+
+ __asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt));
+
+ /* Load the data segment registers, and thus the descriptors ready for
+ real mode. The base address of each segment is 0x100, 16 times the
+ selector value being loaded here. This is so that the segment
+ registers don't have to be reloaded after switching to real mode:
+ the values are consistent for real mode operation already. */
+
+ __asm__ __volatile__ ("movl $0x0010,%%eax\n"
+ "\tmovl %%eax,%%ds\n"
+ "\tmovl %%eax,%%es\n"
+ "\tmovl %%eax,%%fs\n"
+ "\tmovl %%eax,%%gs\n"
+ "\tmovl %%eax,%%ss" : : : "eax");
+
+ /* Jump to the 16-bit code that we copied earlier. It disables paging
+ and the cache, switches to real mode, and jumps to the BIOS reset
+ entry point. */
+
+ __asm__ __volatile__ ("ljmp $0x0008,%0"
+ :
+ : "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
+}
+
+void machine_restart(char * __unused)
+{
+#ifdef CONFIG_SMP
+ int cpuid;
+
+ cpuid = GET_APIC_ID(apic_read(APIC_ID));
+
+ if (reboot_smp) {
+
+ /* check to see if reboot_cpu is valid
+ if its not, default to the BSP */
+ if ((reboot_cpu == -1) ||
+ (reboot_cpu > (NR_CPUS -1)) ||
+ !physid_isset(cpuid, phys_cpu_present_map))
+ reboot_cpu = boot_cpu_physical_apicid;
+
+ reboot_smp = 0; /* use this as a flag to only go through this once*/
+ /* re-run this function on the other CPUs
+ it will fall though this section since we have
+ cleared reboot_smp, and do the reboot if it is the
+ correct CPU, otherwise it halts. */
+ if (reboot_cpu != cpuid)
+ smp_call_function((void *)machine_restart , NULL, 1, 0);
+ }
+
+ /* if reboot_cpu is still -1, then we want a tradional reboot,
+ and if we are not running on the reboot_cpu,, halt */
+ if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) {
+ for (;;)
+ __asm__ __volatile__ ("hlt");
+ }
+ /*
+ * Stop all CPUs and turn off local APICs and the IO-APIC, so
+ * other OSs see a clean IRQ state.
+ */
+ smp_send_stop();
+#endif /* CONFIG_SMP */
+
+ lapic_shutdown();
+
+#ifdef CONFIG_X86_IO_APIC
+ disable_IO_APIC();
+#endif
+
+ if (!reboot_thru_bios) {
+ if (efi_enabled) {
+ efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL);
+ __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ __asm__ __volatile__("int3");
+ }
+ /* rebooting needs to touch the page at absolute addr 0 */
+ *((unsigned short *)__va(0x472)) = reboot_mode;
+ for (;;) {
+ mach_reboot();
+ /* That didn't work - force a triple fault.. */
+ __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ __asm__ __volatile__("int3");
+ }
+ }
+ if (efi_enabled)
+ efi.reset_system(EFI_RESET_WARM, EFI_SUCCESS, 0, NULL);
+
+ machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_halt(void)
+{
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off(void)
+{
+ lapic_shutdown();
+
+ if (efi_enabled)
+ efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
+ if (pm_power_off)
+ pm_power_off();
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c
new file mode 100644
index 0000000..69e203a
--- /dev/null
+++ b/arch/i386/kernel/scx200.c
@@ -0,0 +1,167 @@
+/* linux/arch/i386/kernel/scx200.c
+
+ Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+ National Semiconductor SCx200 support. */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/scx200.h>
+
+/* Verify that the configuration block really is there */
+#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
+
+#define NAME "scx200"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 Driver");
+MODULE_LICENSE("GPL");
+
+unsigned scx200_gpio_base = 0;
+long scx200_gpio_shadow[2];
+
+unsigned scx200_cb_base = 0;
+
+static struct pci_device_id scx200_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) },
+ { },
+};
+MODULE_DEVICE_TABLE(pci,scx200_tbl);
+
+static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *);
+
+static struct pci_driver scx200_pci_driver = {
+ .name = "scx200",
+ .id_table = scx200_tbl,
+ .probe = scx200_probe,
+};
+
+static DEFINE_SPINLOCK(scx200_gpio_config_lock);
+
+static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int bank;
+ unsigned base;
+
+ if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE ||
+ pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) {
+ base = pci_resource_start(pdev, 0);
+ printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
+
+ if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) {
+ printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
+ return -EBUSY;
+ }
+
+ scx200_gpio_base = base;
+
+ /* read the current values driven on the GPIO signals */
+ for (bank = 0; bank < 2; ++bank)
+ scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
+
+ } else {
+ /* find the base of the Configuration Block */
+ if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) {
+ scx200_cb_base = SCx200_CB_BASE_FIXED;
+ } else {
+ pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base);
+ if (scx200_cb_probe(base)) {
+ scx200_cb_base = base;
+ } else {
+ printk(KERN_WARNING NAME ": Configuration Block not found\n");
+ return -ENODEV;
+ }
+ }
+ printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base);
+ }
+
+ return 0;
+}
+
+u32 scx200_gpio_configure(int index, u32 mask, u32 bits)
+{
+ u32 config, new_config;
+ unsigned long flags;
+
+ spin_lock_irqsave(&scx200_gpio_config_lock, flags);
+
+ outl(index, scx200_gpio_base + 0x20);
+ config = inl(scx200_gpio_base + 0x24);
+
+ new_config = (config & mask) | bits;
+ outl(new_config, scx200_gpio_base + 0x24);
+
+ spin_unlock_irqrestore(&scx200_gpio_config_lock, flags);
+
+ return config;
+}
+
+#if 0
+void scx200_gpio_dump(unsigned index)
+{
+ u32 config = scx200_gpio_configure(index, ~0, 0);
+ printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
+
+ if (config & 1)
+ printk(" OE"); /* output enabled */
+ else
+ printk(" TS"); /* tristate */
+ if (config & 2)
+ printk(" PP"); /* push pull */
+ else
+ printk(" OD"); /* open drain */
+ if (config & 4)
+ printk(" PUE"); /* pull up enabled */
+ else
+ printk(" PUD"); /* pull up disabled */
+ if (config & 8)
+ printk(" LOCKED"); /* locked */
+ if (config & 16)
+ printk(" LEVEL"); /* level input */
+ else
+ printk(" EDGE"); /* edge input */
+ if (config & 32)
+ printk(" HI"); /* trigger on rising edge */
+ else
+ printk(" LO"); /* trigger on falling edge */
+ if (config & 64)
+ printk(" DEBOUNCE"); /* debounce */
+ printk("\n");
+}
+#endif /* 0 */
+
+static int __init scx200_init(void)
+{
+ printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
+
+ return pci_module_init(&scx200_pci_driver);
+}
+
+static void __exit scx200_cleanup(void)
+{
+ pci_unregister_driver(&scx200_pci_driver);
+ release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
+}
+
+module_init(scx200_init);
+module_exit(scx200_cleanup);
+
+EXPORT_SYMBOL(scx200_gpio_base);
+EXPORT_SYMBOL(scx200_gpio_shadow);
+EXPORT_SYMBOL(scx200_gpio_configure);
+EXPORT_SYMBOL(scx200_cb_base);
+
+/*
+ Local variables:
+ compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules"
+ c-basic-offset: 8
+ End:
+*/
diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c
new file mode 100644
index 0000000..469f496
--- /dev/null
+++ b/arch/i386/kernel/semaphore.c
@@ -0,0 +1,297 @@
+/*
+ * i386 semaphore implementation.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ *
+ * Portions Copyright 1999 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <asm/semaphore.h>
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to acquire the semaphore, while the "sleeping"
+ * variable is a count of such acquires.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * "sleeping" and the contention routine ordering is protected
+ * by the spinlock in the semaphore's waitqueue head.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+
+/*
+ * Logic:
+ * - only on a boundary condition do we need to care. When we go
+ * from a negative count to a non-negative, we wake people up.
+ * - when we go from a non-negative count to a negative do we
+ * (a) synchronize with the "sleeper" count and (b) make sure
+ * that we're on the wakeup list before we synchronize so that
+ * we cannot lose wakeup events.
+ */
+
+static fastcall void __attribute_used__ __up(struct semaphore *sem)
+{
+ wake_up(&sem->wait);
+}
+
+static fastcall void __attribute_used__ __sched __down(struct semaphore * sem)
+{
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+ unsigned long flags;
+
+ tsk->state = TASK_UNINTERRUPTIBLE;
+ spin_lock_irqsave(&sem->wait.lock, flags);
+ add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+ sem->sleepers++;
+ for (;;) {
+ int sleepers = sem->sleepers;
+
+ /*
+ * Add "everybody else" into it. They aren't
+ * playing, because we own the spinlock in
+ * the wait_queue_head.
+ */
+ if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+ sem->sleepers = 0;
+ break;
+ }
+ sem->sleepers = 1; /* us - see -1 above */
+ spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+ schedule();
+
+ spin_lock_irqsave(&sem->wait.lock, flags);
+ tsk->state = TASK_UNINTERRUPTIBLE;
+ }
+ remove_wait_queue_locked(&sem->wait, &wait);
+ wake_up_locked(&sem->wait);
+ spin_unlock_irqrestore(&sem->wait.lock, flags);
+ tsk->state = TASK_RUNNING;
+}
+
+static fastcall int __attribute_used__ __sched __down_interruptible(struct semaphore * sem)
+{
+ int retval = 0;
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+ unsigned long flags;
+
+ tsk->state = TASK_INTERRUPTIBLE;
+ spin_lock_irqsave(&sem->wait.lock, flags);
+ add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+ sem->sleepers++;
+ for (;;) {
+ int sleepers = sem->sleepers;
+
+ /*
+ * With signals pending, this turns into
+ * the trylock failure case - we won't be
+ * sleeping, and we* can't get the lock as
+ * it has contention. Just correct the count
+ * and exit.
+ */
+ if (signal_pending(current)) {
+ retval = -EINTR;
+ sem->sleepers = 0;
+ atomic_add(sleepers, &sem->count);
+ break;
+ }
+
+ /*
+ * Add "everybody else" into it. They aren't
+ * playing, because we own the spinlock in
+ * wait_queue_head. The "-1" is because we're
+ * still hoping to get the semaphore.
+ */
+ if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+ sem->sleepers = 0;
+ break;
+ }
+ sem->sleepers = 1; /* us - see -1 above */
+ spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+ schedule();
+
+ spin_lock_irqsave(&sem->wait.lock, flags);
+ tsk->state = TASK_INTERRUPTIBLE;
+ }
+ remove_wait_queue_locked(&sem->wait, &wait);
+ wake_up_locked(&sem->wait);
+ spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+ tsk->state = TASK_RUNNING;
+ return retval;
+}
+
+/*
+ * Trylock failed - make sure we correct for
+ * having decremented the count.
+ *
+ * We could have done the trylock with a
+ * single "cmpxchg" without failure cases,
+ * but then it wouldn't work on a 386.
+ */
+static fastcall int __attribute_used__ __down_trylock(struct semaphore * sem)
+{
+ int sleepers;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sem->wait.lock, flags);
+ sleepers = sem->sleepers + 1;
+ sem->sleepers = 0;
+
+ /*
+ * Add "everybody else" and us into it. They aren't
+ * playing, because we own the spinlock in the
+ * wait_queue_head.
+ */
+ if (!atomic_add_negative(sleepers, &sem->count)) {
+ wake_up_locked(&sem->wait);
+ }
+
+ spin_unlock_irqrestore(&sem->wait.lock, flags);
+ return 1;
+}
+
+
+/*
+ * The semaphore operations have a special calling sequence that
+ * allow us to do a simpler in-line version of them. These routines
+ * need to convert that sequence back into the C sequence when
+ * there is contention on the semaphore.
+ *
+ * %eax contains the semaphore pointer on entry. Save the C-clobbered
+ * registers (%eax, %edx and %ecx) except %eax whish is either a return
+ * value or just clobbered..
+ */
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed\n"
+"__down_failed:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "pushl %ebp\n\t"
+ "movl %esp,%ebp\n\t"
+#endif
+ "pushl %edx\n\t"
+ "pushl %ecx\n\t"
+ "call __down\n\t"
+ "popl %ecx\n\t"
+ "popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "movl %ebp,%esp\n\t"
+ "popl %ebp\n\t"
+#endif
+ "ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed_interruptible\n"
+"__down_failed_interruptible:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "pushl %ebp\n\t"
+ "movl %esp,%ebp\n\t"
+#endif
+ "pushl %edx\n\t"
+ "pushl %ecx\n\t"
+ "call __down_interruptible\n\t"
+ "popl %ecx\n\t"
+ "popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "movl %ebp,%esp\n\t"
+ "popl %ebp\n\t"
+#endif
+ "ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed_trylock\n"
+"__down_failed_trylock:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "pushl %ebp\n\t"
+ "movl %esp,%ebp\n\t"
+#endif
+ "pushl %edx\n\t"
+ "pushl %ecx\n\t"
+ "call __down_trylock\n\t"
+ "popl %ecx\n\t"
+ "popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+ "movl %ebp,%esp\n\t"
+ "popl %ebp\n\t"
+#endif
+ "ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __up_wakeup\n"
+"__up_wakeup:\n\t"
+ "pushl %edx\n\t"
+ "pushl %ecx\n\t"
+ "call __up\n\t"
+ "popl %ecx\n\t"
+ "popl %edx\n\t"
+ "ret"
+);
+
+/*
+ * rw spinlock fallbacks
+ */
+#if defined(CONFIG_SMP)
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __write_lock_failed\n"
+"__write_lock_failed:\n\t"
+ LOCK "addl $" RW_LOCK_BIAS_STR ",(%eax)\n"
+"1: rep; nop\n\t"
+ "cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
+ "jne 1b\n\t"
+ LOCK "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
+ "jnz __write_lock_failed\n\t"
+ "ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __read_lock_failed\n"
+"__read_lock_failed:\n\t"
+ LOCK "incl (%eax)\n"
+"1: rep; nop\n\t"
+ "cmpl $1,(%eax)\n\t"
+ "js 1b\n\t"
+ LOCK "decl (%eax)\n\t"
+ "js __read_lock_failed\n\t"
+ "ret"
+);
+#endif
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
new file mode 100644
index 0000000..945ec73
--- /dev/null
+++ b/arch/i386/kernel/setup.c
@@ -0,0 +1,1535 @@
+/*
+ * linux/arch/i386/kernel/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ * Memory region support
+ * David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ * Added E820 sanitization routine (removes overlapping memory regions);
+ * Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ * Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ * Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/nodemask.h>
+#include <video/edid.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/io.h>
+#include "setup_arch_pre.h"
+#include <bios_ebda.h>
+
+/* This value is set up by the early boot code to point to the value
+ immediately after the boot time page tables. It contains a *physical*
+ address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+int disable_pse __initdata = 0;
+
+/*
+ * Machine setup..
+ */
+
+#ifdef CONFIG_EFI
+int efi_enabled = 0;
+EXPORT_SYMBOL(efi_enabled);
+#endif
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+
+unsigned long mmu_cr4_features;
+
+#ifdef CONFIG_ACPI_INTERPRETER
+ int acpi_disabled = 0;
+#else
+ int acpi_disabled = 1;
+#endif
+EXPORT_SYMBOL(acpi_disabled);
+
+#ifdef CONFIG_ACPI_BOOT
+int __initdata acpi_force = 0;
+extern acpi_interrupt_flags acpi_sci_flags;
+#endif
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+unsigned int mca_pentium_flag;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x10000000;
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
+/*
+ * Setup options
+ */
+struct drive_info_struct { char dummy[32]; } drive_info;
+struct screen_info screen_info;
+struct apm_info apm_info;
+struct sys_desc_table_struct {
+ unsigned short length;
+ unsigned char table[0];
+};
+struct edid_info edid_info;
+struct ist_info ist_info;
+struct e820map e820;
+
+extern void early_cpu_init(void);
+extern void dmi_scan_machine(void);
+extern void generic_apic_probe(char *);
+extern int root_mountflags;
+
+unsigned long saved_videomode;
+
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+
+static char command_line[COMMAND_LINE_SIZE];
+
+unsigned char __initdata boot_params[PARAM_SIZE];
+
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource system_rom_resource = {
+ .name = "System ROM",
+ .start = 0xf0000,
+ .end = 0xfffff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource extension_rom_resource = {
+ .name = "Extension ROM",
+ .start = 0xe0000,
+ .end = 0xeffff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource adapter_rom_resources[] = { {
+ .name = "Adapter ROM",
+ .start = 0xc8000,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+ .name = "Adapter ROM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+ .name = "Adapter ROM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+ .name = "Adapter ROM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+ .name = "Adapter ROM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+ .name = "Adapter ROM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+} };
+
+#define ADAPTER_ROM_RESOURCES \
+ (sizeof adapter_rom_resources / sizeof adapter_rom_resources[0])
+
+static struct resource video_rom_resource = {
+ .name = "Video ROM",
+ .start = 0xc0000,
+ .end = 0xc7fff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource video_ram_resource = {
+ .name = "Video RAM area",
+ .start = 0xa0000,
+ .end = 0xbffff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource standard_io_resources[] = { {
+ .name = "dma1",
+ .start = 0x0000,
+ .end = 0x001f,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "pic1",
+ .start = 0x0020,
+ .end = 0x0021,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "timer0",
+ .start = 0x0040,
+ .end = 0x0043,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "timer1",
+ .start = 0x0050,
+ .end = 0x0053,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "keyboard",
+ .start = 0x0060,
+ .end = 0x006f,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "dma page reg",
+ .start = 0x0080,
+ .end = 0x008f,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "pic2",
+ .start = 0x00a0,
+ .end = 0x00a1,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "dma2",
+ .start = 0x00c0,
+ .end = 0x00df,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "fpu",
+ .start = 0x00f0,
+ .end = 0x00ff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+} };
+
+#define STANDARD_IO_RESOURCES \
+ (sizeof standard_io_resources / sizeof standard_io_resources[0])
+
+#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
+
+static int __init romchecksum(unsigned char *rom, unsigned long length)
+{
+ unsigned char *p, sum = 0;
+
+ for (p = rom; p < rom + length; p++)
+ sum += *p;
+ return sum == 0;
+}
+
+static void __init probe_roms(void)
+{
+ unsigned long start, length, upper;
+ unsigned char *rom;
+ int i;
+
+ /* video rom */
+ upper = adapter_rom_resources[0].start;
+ for (start = video_rom_resource.start; start < upper; start += 2048) {
+ rom = isa_bus_to_virt(start);
+ if (!romsignature(rom))
+ continue;
+
+ video_rom_resource.start = start;
+
+ /* 0 < length <= 0x7f * 512, historically */
+ length = rom[2] * 512;
+
+ /* if checksum okay, trust length byte */
+ if (length && romchecksum(rom, length))
+ video_rom_resource.end = start + length - 1;
+
+ request_resource(&iomem_resource, &video_rom_resource);
+ break;
+ }
+
+ start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
+ if (start < upper)
+ start = upper;
+
+ /* system rom */
+ request_resource(&iomem_resource, &system_rom_resource);
+ upper = system_rom_resource.start;
+
+ /* check for extension rom (ignore length byte!) */
+ rom = isa_bus_to_virt(extension_rom_resource.start);
+ if (romsignature(rom)) {
+ length = extension_rom_resource.end - extension_rom_resource.start + 1;
+ if (romchecksum(rom, length)) {
+ request_resource(&iomem_resource, &extension_rom_resource);
+ upper = extension_rom_resource.start;
+ }
+ }
+
+ /* check for adapter roms on 2k boundaries */
+ for (i = 0; i < ADAPTER_ROM_RESOURCES && start < upper; start += 2048) {
+ rom = isa_bus_to_virt(start);
+ if (!romsignature(rom))
+ continue;
+
+ /* 0 < length <= 0x7f * 512, historically */
+ length = rom[2] * 512;
+
+ /* but accept any length that fits if checksum okay */
+ if (!length || start + length > upper || !romchecksum(rom, length))
+ continue;
+
+ adapter_rom_resources[i].start = start;
+ adapter_rom_resources[i].end = start + length - 1;
+ request_resource(&iomem_resource, &adapter_rom_resources[i]);
+
+ start = adapter_rom_resources[i++].end & ~2047UL;
+ }
+}
+
+static void __init limit_regions(unsigned long long size)
+{
+ unsigned long long current_addr = 0;
+ int i;
+
+ if (efi_enabled) {
+ for (i = 0; i < memmap.nr_map; i++) {
+ current_addr = memmap.map[i].phys_addr +
+ (memmap.map[i].num_pages << 12);
+ if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) {
+ if (current_addr >= size) {
+ memmap.map[i].num_pages -=
+ (((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
+ memmap.nr_map = i + 1;
+ return;
+ }
+ }
+ }
+ }
+ for (i = 0; i < e820.nr_map; i++) {
+ if (e820.map[i].type == E820_RAM) {
+ current_addr = e820.map[i].addr + e820.map[i].size;
+ if (current_addr >= size) {
+ e820.map[i].size -= current_addr-size;
+ e820.nr_map = i + 1;
+ return;
+ }
+ }
+ }
+}
+
+static void __init add_memory_region(unsigned long long start,
+ unsigned long long size, int type)
+{
+ int x;
+
+ if (!efi_enabled) {
+ x = e820.nr_map;
+
+ if (x == E820MAX) {
+ printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+ return;
+ }
+
+ e820.map[x].addr = start;
+ e820.map[x].size = size;
+ e820.map[x].type = type;
+ e820.nr_map++;
+ }
+} /* add_memory_region */
+
+#define E820_DEBUG 1
+
+static void __init print_memory_map(char *who)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ printk(" %s: %016Lx - %016Lx ", who,
+ e820.map[i].addr,
+ e820.map[i].addr + e820.map[i].size);
+ switch (e820.map[i].type) {
+ case E820_RAM: printk("(usable)\n");
+ break;
+ case E820_RESERVED:
+ printk("(reserved)\n");
+ break;
+ case E820_ACPI:
+ printk("(ACPI data)\n");
+ break;
+ case E820_NVS:
+ printk("(ACPI NVS)\n");
+ break;
+ default: printk("type %lu\n", e820.map[i].type);
+ break;
+ }
+ }
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries. The following
+ * replaces the original e820 map with a new one, removing overlaps.
+ *
+ */
+struct change_member {
+ struct e820entry *pbios; /* pointer to original bios entry */
+ unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*E820MAX] __initdata;
+static struct change_member *change_point[2*E820MAX] __initdata;
+static struct e820entry *overlap_list[E820MAX] __initdata;
+static struct e820entry new_bios[E820MAX] __initdata;
+
+static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
+{
+ struct change_member *change_tmp;
+ unsigned long current_type, last_type;
+ unsigned long long last_addr;
+ int chgidx, still_changing;
+ int overlap_entries;
+ int new_bios_entry;
+ int old_nr, new_nr, chg_nr;
+ int i;
+
+ /*
+ Visually we're performing the following (1,2,3,4 = memory types)...
+
+ Sample memory map (w/overlaps):
+ ____22__________________
+ ______________________4_
+ ____1111________________
+ _44_____________________
+ 11111111________________
+ ____________________33__
+ ___________44___________
+ __________33333_________
+ ______________22________
+ ___________________2222_
+ _________111111111______
+ _____________________11_
+ _________________4______
+
+ Sanitized equivalent (no overlap):
+ 1_______________________
+ _44_____________________
+ ___1____________________
+ ____22__________________
+ ______11________________
+ _________1______________
+ __________3_____________
+ ___________44___________
+ _____________33_________
+ _______________2________
+ ________________1_______
+ _________________4______
+ ___________________2____
+ ____________________33__
+ ______________________4_
+ */
+
+ /* if there's only one memory region, don't bother */
+ if (*pnr_map < 2)
+ return -1;
+
+ old_nr = *pnr_map;
+
+ /* bail out if we find any unreasonable addresses in bios map */
+ for (i=0; i<old_nr; i++)
+ if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+ return -1;
+
+ /* create pointers for initial change-point information (for sorting) */
+ for (i=0; i < 2*old_nr; i++)
+ change_point[i] = &change_point_list[i];
+
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
+ chgidx = 0;
+ for (i=0; i < old_nr; i++) {
+ if (biosmap[i].size != 0) {
+ change_point[chgidx]->addr = biosmap[i].addr;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ }
+ }
+ chg_nr = chgidx; /* true number of change-points */
+
+ /* sort change-point list by memory addresses (low -> high) */
+ still_changing = 1;
+ while (still_changing) {
+ still_changing = 0;
+ for (i=1; i < chg_nr; i++) {
+ /* if <current_addr> > <last_addr>, swap */
+ /* or, if current=<start_addr> & last=<end_addr>, swap */
+ if ((change_point[i]->addr < change_point[i-1]->addr) ||
+ ((change_point[i]->addr == change_point[i-1]->addr) &&
+ (change_point[i]->addr == change_point[i]->pbios->addr) &&
+ (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
+ )
+ {
+ change_tmp = change_point[i];
+ change_point[i] = change_point[i-1];
+ change_point[i-1] = change_tmp;
+ still_changing=1;
+ }
+ }
+ }
+
+ /* create a new bios memory map, removing overlaps */
+ overlap_entries=0; /* number of entries in the overlap table */
+ new_bios_entry=0; /* index for creating new bios map entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
+ /* loop through change-points, determining affect on the new bios map */
+ for (chgidx=0; chgidx < chg_nr; chgidx++)
+ {
+ /* keep track of all overlapping bios entries */
+ if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
+ {
+ /* add map entry to overlap list (> 1 entry implies an overlap) */
+ overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
+ }
+ else
+ {
+ /* remove entry from list (order independent, so swap with last) */
+ for (i=0; i<overlap_entries; i++)
+ {
+ if (overlap_list[i] == change_point[chgidx]->pbios)
+ overlap_list[i] = overlap_list[overlap_entries-1];
+ }
+ overlap_entries--;
+ }
+ /* if there are overlapping entries, decide which "type" to use */
+ /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+ current_type = 0;
+ for (i=0; i<overlap_entries; i++)
+ if (overlap_list[i]->type > current_type)
+ current_type = overlap_list[i]->type;
+ /* continue building up new bios map based on this information */
+ if (current_type != last_type) {
+ if (last_type != 0) {
+ new_bios[new_bios_entry].size =
+ change_point[chgidx]->addr - last_addr;
+ /* move forward only if the new size was non-zero */
+ if (new_bios[new_bios_entry].size != 0)
+ if (++new_bios_entry >= E820MAX)
+ break; /* no more space left for new bios entries */
+ }
+ if (current_type != 0) {
+ new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
+ new_bios[new_bios_entry].type = current_type;
+ last_addr=change_point[chgidx]->addr;
+ }
+ last_type = current_type;
+ }
+ }
+ new_nr = new_bios_entry; /* retain count for new bios entries */
+
+ /* copy new bios mapping into original location */
+ memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
+ *pnr_map = new_nr;
+
+ return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory. If we aren't, we'll fake a memory map.
+ *
+ * We check to see that the memory map contains at least 2 elements
+ * before we'll use it, because the detection code in setup.S may
+ * not be perfect and most every PC known to man has two memory
+ * regions: one from 0 to 640k, and one from 1mb up. (The IBM
+ * thinkpad 560x, for example, does not cooperate with the memory
+ * detection code.)
+ */
+static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+{
+ /* Only one memory region (or negative)? Ignore it */
+ if (nr_map < 2)
+ return -1;
+
+ do {
+ unsigned long long start = biosmap->addr;
+ unsigned long long size = biosmap->size;
+ unsigned long long end = start + size;
+ unsigned long type = biosmap->type;
+
+ /* Overflow in 64 bits? Ignore the memory map. */
+ if (start > end)
+ return -1;
+
+ /*
+ * Some BIOSes claim RAM in the 640k - 1M region.
+ * Not right. Fix it up.
+ */
+ if (type == E820_RAM) {
+ if (start < 0x100000ULL && end > 0xA0000ULL) {
+ if (start < 0xA0000ULL)
+ add_memory_region(start, 0xA0000ULL-start, type);
+ if (end <= 0x100000ULL)
+ continue;
+ start = 0x100000ULL;
+ size = end - start;
+ }
+ }
+ add_memory_region(start, size, type);
+ } while (biosmap++,--nr_map);
+ return 0;
+}
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ * from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+ memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
+ memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
+ edd.mbr_signature_nr = EDD_MBR_SIG_NR;
+ edd.edd_info_nr = EDD_NR;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+/*
+ * Do NOT EVER look at the BIOS memory size location.
+ * It does not work on many machines.
+ */
+#define LOWMEMSIZE() (0x9f000)
+
+static void __init parse_cmdline_early (char ** cmdline_p)
+{
+ char c = ' ', *to = command_line, *from = saved_command_line;
+ int len = 0;
+ int userdef = 0;
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+ for (;;) {
+ if (c != ' ')
+ goto next_char;
+ /*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+ if (!memcmp(from, "mem=", 4)) {
+ if (to != command_line)
+ to--;
+ if (!memcmp(from+4, "nopentium", 9)) {
+ from += 9+4;
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long mem_size;
+
+ mem_size = memparse(from+4, &from);
+ limit_regions(mem_size);
+ userdef=1;
+ }
+ }
+
+ else if (!memcmp(from, "memmap=", 7)) {
+ if (to != command_line)
+ to--;
+ if (!memcmp(from+7, "exactmap", 8)) {
+ from += 8+7;
+ e820.nr_map = 0;
+ userdef = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long start_at, mem_size;
+
+ mem_size = memparse(from+7, &from);
+ if (*from == '@') {
+ start_at = memparse(from+1, &from);
+ add_memory_region(start_at, mem_size, E820_RAM);
+ } else if (*from == '#') {
+ start_at = memparse(from+1, &from);
+ add_memory_region(start_at, mem_size, E820_ACPI);
+ } else if (*from == '$') {
+ start_at = memparse(from+1, &from);
+ add_memory_region(start_at, mem_size, E820_RESERVED);
+ } else {
+ limit_regions(mem_size);
+ userdef=1;
+ }
+ }
+ }
+
+ else if (!memcmp(from, "noexec=", 7))
+ noexec_setup(from + 7);
+
+
+#ifdef CONFIG_X86_SMP
+ /*
+ * If the BIOS enumerates physical processors before logical,
+ * maxcpus=N at enumeration-time can be used to disable HT.
+ */
+ else if (!memcmp(from, "maxcpus=", 8)) {
+ extern unsigned int maxcpus;
+
+ maxcpus = simple_strtoul(from + 8, NULL, 0);
+ }
+#endif
+
+#ifdef CONFIG_ACPI_BOOT
+ /* "acpi=off" disables both ACPI table parsing and interpreter */
+ else if (!memcmp(from, "acpi=off", 8)) {
+ disable_acpi();
+ }
+
+ /* acpi=force to over-ride black-list */
+ else if (!memcmp(from, "acpi=force", 10)) {
+ acpi_force = 1;
+ acpi_ht = 1;
+ acpi_disabled = 0;
+ }
+
+ /* acpi=strict disables out-of-spec workarounds */
+ else if (!memcmp(from, "acpi=strict", 11)) {
+ acpi_strict = 1;
+ }
+
+ /* Limit ACPI just to boot-time to enable HT */
+ else if (!memcmp(from, "acpi=ht", 7)) {
+ if (!acpi_force)
+ disable_acpi();
+ acpi_ht = 1;
+ }
+
+ /* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
+ else if (!memcmp(from, "pci=noacpi", 10)) {
+ acpi_disable_pci();
+ }
+ /* "acpi=noirq" disables ACPI interrupt routing */
+ else if (!memcmp(from, "acpi=noirq", 10)) {
+ acpi_noirq_set();
+ }
+
+ else if (!memcmp(from, "acpi_sci=edge", 13))
+ acpi_sci_flags.trigger = 1;
+
+ else if (!memcmp(from, "acpi_sci=level", 14))
+ acpi_sci_flags.trigger = 3;
+
+ else if (!memcmp(from, "acpi_sci=high", 13))
+ acpi_sci_flags.polarity = 1;
+
+ else if (!memcmp(from, "acpi_sci=low", 12))
+ acpi_sci_flags.polarity = 3;
+
+#ifdef CONFIG_X86_IO_APIC
+ else if (!memcmp(from, "acpi_skip_timer_override", 24))
+ acpi_skip_timer_override = 1;
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* disable IO-APIC */
+ else if (!memcmp(from, "noapic", 6))
+ disable_ioapic_setup();
+#endif /* CONFIG_X86_LOCAL_APIC */
+#endif /* CONFIG_ACPI_BOOT */
+
+ /*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+ else if (!memcmp(from, "highmem=", 8))
+ highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
+
+ /*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+ else if (!memcmp(from, "vmalloc=", 8))
+ __VMALLOC_RESERVE = memparse(from+8, &from);
+
+ next_char:
+ c = *(from++);
+ if (!c)
+ break;
+ if (COMMAND_LINE_SIZE <= ++len)
+ break;
+ *(to++) = c;
+ }
+ *to = '\0';
+ *cmdline_p = command_line;
+ if (userdef) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
+ }
+}
+
+/*
+ * Callback for efi_memory_walk.
+ */
+static int __init
+efi_find_max_pfn(unsigned long start, unsigned long end, void *arg)
+{
+ unsigned long *max_pfn = arg, pfn;
+
+ if (start < end) {
+ pfn = PFN_UP(end -1);
+ if (pfn > *max_pfn)
+ *max_pfn = pfn;
+ }
+ return 0;
+}
+
+
+/*
+ * Find the highest page frame number we have available
+ */
+void __init find_max_pfn(void)
+{
+ int i;
+
+ max_pfn = 0;
+ if (efi_enabled) {
+ efi_memmap_walk(efi_find_max_pfn, &max_pfn);
+ return;
+ }
+
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long start, end;
+ /* RAM? */
+ if (e820.map[i].type != E820_RAM)
+ continue;
+ start = PFN_UP(e820.map[i].addr);
+ end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+ if (start >= end)
+ continue;
+ if (end > max_pfn)
+ max_pfn = end;
+ }
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+ unsigned long max_low_pfn;
+
+ max_low_pfn = max_pfn;
+ if (max_low_pfn > MAXMEM_PFN) {
+ if (highmem_pages == -1)
+ highmem_pages = max_pfn - MAXMEM_PFN;
+ if (highmem_pages + MAXMEM_PFN < max_pfn)
+ max_pfn = MAXMEM_PFN + highmem_pages;
+ if (highmem_pages + MAXMEM_PFN > max_pfn) {
+ printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
+ highmem_pages = 0;
+ }
+ max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+ /* Maximum memory usable is what is directly addressable */
+ printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+ MAXMEM>>20);
+ if (max_pfn > MAX_NONPAE_PFN)
+ printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+ else
+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+ max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_X86_PAE
+ if (max_pfn > MAX_NONPAE_PFN) {
+ max_pfn = MAX_NONPAE_PFN;
+ printk(KERN_WARNING "Warning only 4GB will be used.\n");
+ printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+ }
+#endif /* !CONFIG_X86_PAE */
+#endif /* !CONFIG_HIGHMEM */
+ } else {
+ if (highmem_pages == -1)
+ highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+ if (highmem_pages >= max_pfn) {
+ printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+ highmem_pages = 0;
+ }
+ if (highmem_pages) {
+ if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
+ printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
+ highmem_pages = 0;
+ }
+ max_low_pfn -= highmem_pages;
+ }
+#else
+ if (highmem_pages)
+ printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+ }
+ return max_low_pfn;
+}
+
+/*
+ * Free all available memory for boot time allocation. Used
+ * as a callback function by efi_memory_walk()
+ */
+
+static int __init
+free_available_memory(unsigned long start, unsigned long end, void *arg)
+{
+ /* check max_low_pfn */
+ if (start >= ((max_low_pfn + 1) << PAGE_SHIFT))
+ return 0;
+ if (end >= ((max_low_pfn + 1) << PAGE_SHIFT))
+ end = (max_low_pfn + 1) << PAGE_SHIFT;
+ if (start < end)
+ free_bootmem(start, end - start);
+
+ return 0;
+}
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
+{
+ int i;
+
+ if (efi_enabled) {
+ efi_memmap_walk(free_available_memory, NULL);
+ return;
+ }
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long curr_pfn, last_pfn, size;
+ /*
+ * Reserve usable low memory
+ */
+ if (e820.map[i].type != E820_RAM)
+ continue;
+ /*
+ * We are rounding up the start address of usable memory:
+ */
+ curr_pfn = PFN_UP(e820.map[i].addr);
+ if (curr_pfn >= max_low_pfn)
+ continue;
+ /*
+ * ... and at the end of the usable range downwards:
+ */
+ last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+
+ if (last_pfn > max_low_pfn)
+ last_pfn = max_low_pfn;
+
+ /*
+ * .. finally, did all the rounding and playing
+ * around just make the area go away?
+ */
+ if (last_pfn <= curr_pfn)
+ continue;
+
+ size = last_pfn - curr_pfn;
+ free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+ }
+}
+
+/*
+ * workaround for Dell systems that neglect to reserve EBDA
+ */
+static void __init reserve_ebda_region(void)
+{
+ unsigned int addr;
+ addr = get_bios_ebda();
+ if (addr)
+ reserve_bootmem(addr, PAGE_SIZE);
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+void __init setup_bootmem_allocator(void);
+static unsigned long __init setup_memory(void)
+{
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ min_low_pfn = PFN_UP(init_pg_tables_end);
+
+ find_max_pfn();
+
+ max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = max_pfn;
+ if (max_pfn > max_low_pfn) {
+ highstart_pfn = max_low_pfn;
+ }
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(max_low_pfn));
+
+ setup_bootmem_allocator();
+
+ return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+ unsigned int max_dma, low;
+
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ low = max_low_pfn;
+
+ if (low < max_dma)
+ zones_size[ZONE_DMA] = low;
+ else {
+ zones_size[ZONE_DMA] = max_dma;
+ zones_size[ZONE_NORMAL] = low - max_dma;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = highend_pfn - low;
+#endif
+ }
+ free_area_init(zones_size);
+}
+#else
+extern unsigned long setup_memory(void);
+extern void zone_sizes_init(void);
+#endif /* !CONFIG_DISCONTIGMEM */
+
+void __init setup_bootmem_allocator(void)
+{
+ unsigned long bootmap_size;
+ /*
+ * Initialize the boot-time allocator (with low memory only):
+ */
+ bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
+
+ register_bootmem_low_pages(max_low_pfn);
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ */
+ reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+
+ /*
+ * reserve physical page 0 - it's a special BIOS page on many boxes,
+ * enabling clean reboots, SMP operation, laptop functions.
+ */
+ reserve_bootmem(0, PAGE_SIZE);
+
+ /* reserve EBDA region, it's a 4K region */
+ reserve_ebda_region();
+
+ /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
+ PCI prefetch into it (errata #56). Usually the page is reserved anyways,
+ unless you have no PS/2 mouse plugged in. */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 6)
+ reserve_bootmem(0xa0000 - 4096, 4096);
+
+#ifdef CONFIG_SMP
+ /*
+ * But first pinch a few for the stack/trampoline stuff
+ * FIXME: Don't need the extra page at 4K, but need to fix
+ * trampoline before removing it. (see the GDT stuff)
+ */
+ reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+ /*
+ * Reserve low memory region for sleep support.
+ */
+ acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (LOADER_TYPE && INITRD_START) {
+ if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+ reserve_bootmem(INITRD_START, INITRD_SIZE);
+ initrd_start =
+ INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+ initrd_end = initrd_start+INITRD_SIZE;
+ }
+ else {
+ printk(KERN_ERR "initrd extends beyond end of memory "
+ "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+ INITRD_START + INITRD_SIZE,
+ max_low_pfn << PAGE_SHIFT);
+ initrd_start = 0;
+ }
+ }
+#endif
+}
+
+/*
+ * The node 0 pgdat is initialized before all of these because
+ * it's needed for bootmem. node>0 pgdats have their virtual
+ * space allocated before the pagetables are in place to access
+ * them, so they can't be cleared then.
+ *
+ * This should all compile down to nothing when NUMA is off.
+ */
+void __init remapped_pgdat_init(void)
+{
+ int nid;
+
+ for_each_online_node(nid) {
+ if (nid != 0)
+ memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+ }
+}
+
+/*
+ * Request address space for all standard RAM and ROM resources
+ * and also for regions reported as reserved by the e820.
+ */
+static void __init
+legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource)
+{
+ int i;
+
+ probe_roms();
+ for (i = 0; i < e820.nr_map; i++) {
+ struct resource *res;
+ if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
+ continue;
+ res = alloc_bootmem_low(sizeof(struct resource));
+ switch (e820.map[i].type) {
+ case E820_RAM: res->name = "System RAM"; break;
+ case E820_ACPI: res->name = "ACPI Tables"; break;
+ case E820_NVS: res->name = "ACPI Non-volatile Storage"; break;
+ default: res->name = "reserved";
+ }
+ res->start = e820.map[i].addr;
+ res->end = res->start + e820.map[i].size - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ request_resource(&iomem_resource, res);
+ if (e820.map[i].type == E820_RAM) {
+ /*
+ * We don't know which RAM region contains kernel data,
+ * so we try it repeatedly and let the resource manager
+ * test it.
+ */
+ request_resource(res, code_resource);
+ request_resource(res, data_resource);
+ }
+ }
+}
+
+/*
+ * Request address space for all standard resources
+ */
+static void __init register_memory(void)
+{
+ unsigned long gapstart, gapsize;
+ unsigned long long last;
+ int i;
+
+ if (efi_enabled)
+ efi_initialize_iomem_resources(&code_resource, &data_resource);
+ else
+ legacy_init_iomem_resources(&code_resource, &data_resource);
+
+ /* EFI systems may still have VGA */
+ request_resource(&iomem_resource, &video_ram_resource);
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, &standard_io_resources[i]);
+
+ /*
+ * Search for the bigest gap in the low 32 bits of the e820
+ * memory space.
+ */
+ last = 0x100000000ull;
+ gapstart = 0x10000000;
+ gapsize = 0x400000;
+ i = e820.nr_map;
+ while (--i >= 0) {
+ unsigned long long start = e820.map[i].addr;
+ unsigned long long end = start + e820.map[i].size;
+
+ /*
+ * Since "last" is at most 4GB, we know we'll
+ * fit in 32 bits if this condition is true
+ */
+ if (last > end) {
+ unsigned long gap = last - end;
+
+ if (gap > gapsize) {
+ gapsize = gap;
+ gapstart = end;
+ }
+ }
+ if (start < last)
+ last = start;
+ }
+
+ /*
+ * Start allocating dynamic PCI memory a bit into the gap,
+ * aligned up to the nearest megabyte.
+ *
+ * Question: should we try to pad it up a bit (do something
+ * like " + (gapsize >> 3)" in there too?). We now have the
+ * technology.
+ */
+ pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
+
+ printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
+ pci_mem_start, gapstart, gapsize);
+}
+
+/* Use inline assembly to define this because the nops are defined
+ as inline assembly strings in the include files and we cannot
+ get them easily into strings. */
+asm("\t.data\nintelnops: "
+ GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
+ GENERIC_NOP7 GENERIC_NOP8);
+asm("\t.data\nk8nops: "
+ K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
+ K8_NOP7 K8_NOP8);
+asm("\t.data\nk7nops: "
+ K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
+ K7_NOP7 K7_NOP8);
+
+extern unsigned char intelnops[], k8nops[], k7nops[];
+static unsigned char *intel_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ intelnops,
+ intelnops + 1,
+ intelnops + 1 + 2,
+ intelnops + 1 + 2 + 3,
+ intelnops + 1 + 2 + 3 + 4,
+ intelnops + 1 + 2 + 3 + 4 + 5,
+ intelnops + 1 + 2 + 3 + 4 + 5 + 6,
+ intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+static unsigned char *k8_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ k8nops,
+ k8nops + 1,
+ k8nops + 1 + 2,
+ k8nops + 1 + 2 + 3,
+ k8nops + 1 + 2 + 3 + 4,
+ k8nops + 1 + 2 + 3 + 4 + 5,
+ k8nops + 1 + 2 + 3 + 4 + 5 + 6,
+ k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+static unsigned char *k7_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ k7nops,
+ k7nops + 1,
+ k7nops + 1 + 2,
+ k7nops + 1 + 2 + 3,
+ k7nops + 1 + 2 + 3 + 4,
+ k7nops + 1 + 2 + 3 + 4 + 5,
+ k7nops + 1 + 2 + 3 + 4 + 5 + 6,
+ k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+static struct nop {
+ int cpuid;
+ unsigned char **noptable;
+} noptypes[] = {
+ { X86_FEATURE_K8, k8_nops },
+ { X86_FEATURE_K7, k7_nops },
+ { -1, NULL }
+};
+
+/* Replace instructions with better alternatives for this CPU type.
+
+ This runs before SMP is initialized to avoid SMP problems with
+ self modifying code. This implies that assymetric systems where
+ APs have less capabilities than the boot processor are not handled.
+ In this case boot with "noreplacement". */
+void apply_alternatives(void *start, void *end)
+{
+ struct alt_instr *a;
+ int diff, i, k;
+ unsigned char **noptable = intel_nops;
+ for (i = 0; noptypes[i].cpuid >= 0; i++) {
+ if (boot_cpu_has(noptypes[i].cpuid)) {
+ noptable = noptypes[i].noptable;
+ break;
+ }
+ }
+ for (a = start; (void *)a < end; a++) {
+ if (!boot_cpu_has(a->cpuid))
+ continue;
+ BUG_ON(a->replacementlen > a->instrlen);
+ memcpy(a->instr, a->replacement, a->replacementlen);
+ diff = a->instrlen - a->replacementlen;
+ /* Pad the rest with nops */
+ for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
+ k = diff;
+ if (k > ASM_NOP_MAX)
+ k = ASM_NOP_MAX;
+ memcpy(a->instr + i, noptable[k], k);
+ }
+ }
+}
+
+static int no_replacement __initdata = 0;
+
+void __init alternative_instructions(void)
+{
+ extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+ if (no_replacement)
+ return;
+ apply_alternatives(__alt_instructions, __alt_instructions_end);
+}
+
+static int __init noreplacement_setup(char *s)
+{
+ no_replacement = 1;
+ return 0;
+}
+
+__setup("noreplacement", noreplacement_setup);
+
+static char * __init machine_specific_memory_setup(void);
+
+#ifdef CONFIG_MCA
+static void set_mca_bus(int x)
+{
+ MCA_bus = x;
+}
+#else
+static void set_mca_bus(int x) { }
+#endif
+
+/*
+ * Determine if we were loaded by an EFI loader. If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization. Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long max_low_pfn;
+
+ memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+ pre_setup_arch_hook();
+ early_cpu_init();
+
+ /*
+ * FIXME: This isn't an official loader_type right
+ * now but does currently work with elilo.
+ * If we were configured as an EFI kernel, check to make
+ * sure that we were loaded correctly from elilo and that
+ * the system table is valid. If not, then initialize normally.
+ */
+#ifdef CONFIG_EFI
+ if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
+ efi_enabled = 1;
+#endif
+
+ ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ drive_info = DRIVE_INFO;
+ screen_info = SCREEN_INFO;
+ edid_info = EDID_INFO;
+ apm_info.bios = APM_BIOS_INFO;
+ ist_info = IST_INFO;
+ saved_videomode = VIDEO_MODE;
+ if( SYS_DESC_TABLE.length != 0 ) {
+ set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
+ machine_id = SYS_DESC_TABLE.table[0];
+ machine_submodel_id = SYS_DESC_TABLE.table[1];
+ BIOS_revision = SYS_DESC_TABLE.table[2];
+ }
+ bootloader_type = LOADER_TYPE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+ ARCH_SETUP
+ if (efi_enabled)
+ efi_init();
+ else {
+ printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+ print_memory_map(machine_specific_memory_setup());
+ }
+
+ copy_edd();
+
+ if (!MOUNT_ROOT_RDONLY)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+
+ code_resource.start = virt_to_phys(_text);
+ code_resource.end = virt_to_phys(_etext)-1;
+ data_resource.start = virt_to_phys(_etext);
+ data_resource.end = virt_to_phys(_edata)-1;
+
+ parse_cmdline_early(cmdline_p);
+
+ max_low_pfn = setup_memory();
+
+ /*
+ * NOTE: before this point _nobody_ is allowed to allocate
+ * any memory using the bootmem allocator. Although the
+ * alloctor is now initialised only the first 8Mb of the kernel
+ * virtual address space has been mapped. All allocations before
+ * paging_init() has completed must use the alloc_bootmem_low_pages()
+ * variant (which allocates DMA'able memory) and care must be taken
+ * not to exceed the 8Mb limit.
+ */
+
+#ifdef CONFIG_SMP
+ smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+ paging_init();
+ remapped_pgdat_init();
+ zone_sizes_init();
+
+ /*
+ * NOTE: at this point the bootmem allocator is fully available.
+ */
+
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ char *s = strstr(*cmdline_p, "earlyprintk=");
+ if (s) {
+ extern void setup_early_printk(char *);
+
+ setup_early_printk(s);
+ printk("early console enabled\n");
+ }
+ }
+#endif
+
+
+ dmi_scan_machine();
+
+#ifdef CONFIG_X86_GENERICARCH
+ generic_apic_probe(*cmdline_p);
+#endif
+ if (efi_enabled)
+ efi_map_memmap();
+
+ /*
+ * Parse the ACPI tables for possible boot-time SMP configuration.
+ */
+ acpi_boot_table_init();
+ acpi_boot_init();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (smp_found_config)
+ get_smp_config();
+#endif
+
+ register_memory();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+#include "setup_arch_post.h"
+/*
+ * Local Variables:
+ * mode:c
+ * c-file-style:"k&r"
+ * c-basic-offset:8
+ * End:
+ */
diff --git a/arch/i386/kernel/sigframe.h b/arch/i386/kernel/sigframe.h
new file mode 100644
index 0000000..d21b14f
--- /dev/null
+++ b/arch/i386/kernel/sigframe.h
@@ -0,0 +1,21 @@
+struct sigframe
+{
+ char *pretcode;
+ int sig;
+ struct sigcontext sc;
+ struct _fpstate fpstate;
+ unsigned long extramask[_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe
+{
+ char *pretcode;
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ struct _fpstate fpstate;
+ char retcode[8];
+};
diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c
new file mode 100644
index 0000000..ef3602e
--- /dev/null
+++ b/arch/i386/kernel/signal.c
@@ -0,0 +1,665 @@
+/*
+ * linux/arch/i386/kernel/signal.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ struct pt_regs * regs = (struct pt_regs *) &history0;
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+ spin_lock_irq(¤t->sighand->siglock);
+ saveset = current->blocked;
+ siginitset(¤t->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs->eax = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(regs, &saveset))
+ return -EINTR;
+ }
+}
+
+asmlinkage int
+sys_rt_sigsuspend(struct pt_regs regs)
+{
+ sigset_t saveset, newset;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (regs.ecx != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, (sigset_t __user *)regs.ebx, sizeof(newset)))
+ return -EFAULT;
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+
+ spin_lock_irq(¤t->sighand->siglock);
+ saveset = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs.eax = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(®s, &saveset))
+ return -EINTR;
+ }
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(unsigned long ebx)
+{
+ /* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
+ struct pt_regs *regs = (struct pt_regs *)&ebx;
+ const stack_t __user *uss = (const stack_t __user *)ebx;
+ stack_t __user *uoss = (stack_t __user *)regs->ecx;
+
+ return do_sigaltstack(uss, uoss, regs->esp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
+{
+ unsigned int err = 0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+
+#define COPY_SEG(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->x##seg = tmp; }
+
+#define COPY_SEG_STRICT(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->x##seg = tmp|3; }
+
+#define GET_SEG(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ loadsegment(seg,tmp); }
+
+#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | X86_EFLAGS_DF | \
+ X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
+ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
+
+ GET_SEG(gs);
+ GET_SEG(fs);
+ COPY_SEG(es);
+ COPY_SEG(ds);
+ COPY(edi);
+ COPY(esi);
+ COPY(ebp);
+ COPY(esp);
+ COPY(ebx);
+ COPY(edx);
+ COPY(ecx);
+ COPY(eip);
+ COPY_SEG_STRICT(cs);
+ COPY_SEG_STRICT(ss);
+
+ {
+ unsigned int tmpflags;
+ err |= __get_user(tmpflags, &sc->eflags);
+ regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+ regs->orig_eax = -1; /* disable syscall checks */
+ }
+
+ {
+ struct _fpstate __user * buf;
+ err |= __get_user(buf, &sc->fpstate);
+ if (buf) {
+ if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= restore_i387(buf);
+ } else {
+ struct task_struct *me = current;
+ if (used_math()) {
+ clear_fpu(me);
+ clear_used_math();
+ }
+ }
+ }
+
+ err |= __get_user(*peax, &sc->eax);
+ return err;
+
+badframe:
+ return 1;
+}
+
+asmlinkage int sys_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *) &__unused;
+ struct sigframe __user *frame = (struct sigframe __user *)(regs->esp - 8);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_NSIG_WORDS > 1
+ && __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc, &eax))
+ goto badframe;
+ return eax;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *) &__unused;
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->esp - 4);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT)
+ goto badframe;
+
+ return eax;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+ struct pt_regs *regs, unsigned long mask)
+{
+ int tmp, err = 0;
+
+ tmp = 0;
+ __asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
+ err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
+ __asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp));
+ err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
+
+ err |= __put_user(regs->xes, (unsigned int __user *)&sc->es);
+ err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds);
+ err |= __put_user(regs->edi, &sc->edi);
+ err |= __put_user(regs->esi, &sc->esi);
+ err |= __put_user(regs->ebp, &sc->ebp);
+ err |= __put_user(regs->esp, &sc->esp);
+ err |= __put_user(regs->ebx, &sc->ebx);
+ err |= __put_user(regs->edx, &sc->edx);
+ err |= __put_user(regs->ecx, &sc->ecx);
+ err |= __put_user(regs->eax, &sc->eax);
+ err |= __put_user(current->thread.trap_no, &sc->trapno);
+ err |= __put_user(current->thread.error_code, &sc->err);
+ err |= __put_user(regs->eip, &sc->eip);
+ err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs);
+ err |= __put_user(regs->eflags, &sc->eflags);
+ err |= __put_user(regs->esp, &sc->esp_at_signal);
+ err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss);
+
+ tmp = save_i387(fpstate);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+
+ /* non-iBCS2 extensions.. */
+ err |= __put_user(mask, &sc->oldmask);
+ err |= __put_user(current->thread.cr2, &sc->cr2);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+ unsigned long esp;
+
+ /* Default to using normal stack */
+ esp = regs->esp;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (sas_ss_flags(esp) == 0)
+ esp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ /* This is the legacy signal stack switching. */
+ else if ((regs->xss & 0xffff) != __USER_DS &&
+ !(ka->sa.sa_flags & SA_RESTORER) &&
+ ka->sa.sa_restorer) {
+ esp = (unsigned long) ka->sa.sa_restorer;
+ }
+
+ return (void __user *)((esp - frame_size) & -8ul);
+}
+
+/* These symbols are defined with the addresses in the vsyscall page.
+ See vsyscall-sigreturn.S. */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs * regs)
+{
+ void __user *restorer;
+ struct sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err = __put_user(usig, &frame->sig);
+ if (err)
+ goto give_sigsegv;
+
+ err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+ if (err)
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ err = __copy_to_user(&frame->extramask, &set->sig[1],
+ sizeof(frame->extramask));
+ if (err)
+ goto give_sigsegv;
+ }
+
+ restorer = &__kernel_sigreturn;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+
+ /* Set up to return from userspace. */
+ err |= __put_user(restorer, &frame->pretcode);
+
+ /*
+ * This is popl %eax ; movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
+ err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->esp = (unsigned long) frame;
+ regs->eip = (unsigned long) ka->sa.sa_handler;
+ regs->eax = (unsigned long) sig;
+ regs->edx = (unsigned long) 0;
+ regs->ecx = (unsigned long) 0;
+
+ set_fs(USER_DS);
+ regs->xds = __USER_DS;
+ regs->xes = __USER_DS;
+ regs->xss = __USER_DS;
+ regs->xcs = __USER_CS;
+
+ /*
+ * Clear TF when entering the signal handler, but
+ * notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+ current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs * regs)
+{
+ void __user *restorer;
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= __put_user(usig, &frame->sig);
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+ if (err)
+ goto give_sigsegv;
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->esp),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+ regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. */
+ restorer = &__kernel_rt_sigreturn;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+ err |= __put_user(restorer, &frame->pretcode);
+
+ /*
+ * This is movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
+ err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->esp = (unsigned long) frame;
+ regs->eip = (unsigned long) ka->sa.sa_handler;
+ regs->eax = (unsigned long) usig;
+ regs->edx = (unsigned long) &frame->info;
+ regs->ecx = (unsigned long) &frame->uc;
+
+ set_fs(USER_DS);
+ regs->xds = __USER_DS;
+ regs->xes = __USER_DS;
+ regs->xss = __USER_DS;
+ regs->xcs = __USER_CS;
+
+ /*
+ * Clear TF when entering the signal handler, but
+ * notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+ current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs * regs)
+{
+ /* Are we from a system call? */
+ if (regs->orig_eax >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->eax) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->eax = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->eax = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->eax = regs->orig_eax;
+ regs->eip -= 2;
+ }
+ }
+
+ /*
+ * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so
+ * that register information in the sigcontext is correct.
+ */
+ if (unlikely(regs->eflags & TF_MASK)
+ && likely(current->ptrace & PT_DTRACE)) {
+ current->ptrace &= ~PT_DTRACE;
+ regs->eflags &= ~TF_MASK;
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ setup_frame(sig, ka, oldset, regs);
+
+ if (!(ka->sa.sa_flags & SA_NODEFER)) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigaddset(¤t->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if ((regs->xcs & 3) != 3)
+ return 1;
+
+ if (current->flags & PF_FREEZE) {
+ refrigerator(0);
+ goto no_signal;
+ }
+
+ if (!oldset)
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Reenable any watchpoints before delivering the
+ * signal to user space. The processor register will
+ * have been cleared if the watchpoint triggered
+ * inside the kernel.
+ */
+ if (unlikely(current->thread.debugreg[7])) {
+ __asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
+ }
+
+ /* Whee! Actually deliver the signal. */
+ handle_signal(signr, &info, &ka, oldset, regs);
+ return 1;
+ }
+
+ no_signal:
+ /* Did we come from a system call? */
+ if (regs->orig_eax >= 0) {
+ /* Restart the system call - no handlers present */
+ if (regs->eax == -ERESTARTNOHAND ||
+ regs->eax == -ERESTARTSYS ||
+ regs->eax == -ERESTARTNOINTR) {
+ regs->eax = regs->orig_eax;
+ regs->eip -= 2;
+ }
+ if (regs->eax == -ERESTART_RESTARTBLOCK){
+ regs->eax = __NR_restart_syscall;
+ regs->eip -= 2;
+ }
+ }
+ return 0;
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+__attribute__((regparm(3)))
+void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
+ __u32 thread_info_flags)
+{
+ /* Pending single-step? */
+ if (thread_info_flags & _TIF_SINGLESTEP) {
+ regs->eflags |= TF_MASK;
+ clear_thread_flag(TIF_SINGLESTEP);
+ }
+ /* deal with pending signal delivery */
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs,oldset);
+
+ clear_thread_flag(TIF_IRET);
+}
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
new file mode 100644
index 0000000..6223c33
--- /dev/null
+++ b/arch/i386/kernel/smp.c
@@ -0,0 +1,612 @@
+/*
+ * Intel SMP support routines.
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ * This code is released under the GNU General Public License version 2 or
+ * later.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <mach_apic.h>
+
+/*
+ * Some notes on x86 processor bugs affecting SMP operation:
+ *
+ * Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
+ * The Linux implications for SMP are handled as follows:
+ *
+ * Pentium III / [Xeon]
+ * None of the E1AP-E3AP errata are visible to the user.
+ *
+ * E1AP. see PII A1AP
+ * E2AP. see PII A2AP
+ * E3AP. see PII A3AP
+ *
+ * Pentium II / [Xeon]
+ * None of the A1AP-A3AP errata are visible to the user.
+ *
+ * A1AP. see PPro 1AP
+ * A2AP. see PPro 2AP
+ * A3AP. see PPro 7AP
+ *
+ * Pentium Pro
+ * None of 1AP-9AP errata are visible to the normal user,
+ * except occasional delivery of 'spurious interrupt' as trap #15.
+ * This is very rare and a non-problem.
+ *
+ * 1AP. Linux maps APIC as non-cacheable
+ * 2AP. worked around in hardware
+ * 3AP. fixed in C0 and above steppings microcode update.
+ * Linux does not use excessive STARTUP_IPIs.
+ * 4AP. worked around in hardware
+ * 5AP. symmetric IO mode (normal Linux operation) not affected.
+ * 'noapic' mode has vector 0xf filled out properly.
+ * 6AP. 'noapic' mode might be affected - fixed in later steppings
+ * 7AP. We do not assume writes to the LVT deassering IRQs
+ * 8AP. We do not enable low power mode (deep sleep) during MP bootup
+ * 9AP. We do not use mixed mode
+ *
+ * Pentium
+ * There is a marginal case where REP MOVS on 100MHz SMP
+ * machines with B stepping processors can fail. XXX should provide
+ * an L1cache=Writethrough or L1cache=off option.
+ *
+ * B stepping CPUs may hang. There are hardware work arounds
+ * for this. We warn about it in case your board doesn't have the work
+ * arounds. Basically thats so I can tell anyone with a B stepping
+ * CPU and SMP problems "tough".
+ *
+ * Specific items [From Pentium Processor Specification Update]
+ *
+ * 1AP. Linux doesn't use remote read
+ * 2AP. Linux doesn't trust APIC errors
+ * 3AP. We work around this
+ * 4AP. Linux never generated 3 interrupts of the same priority
+ * to cause a lost local interrupt.
+ * 5AP. Remote read is never used
+ * 6AP. not affected - worked around in hardware
+ * 7AP. not affected - worked around in hardware
+ * 8AP. worked around in hardware - we get explicit CS errors if not
+ * 9AP. only 'noapic' mode affected. Might generate spurious
+ * interrupts, we log only the first one and count the
+ * rest silently.
+ * 10AP. not affected - worked around in hardware
+ * 11AP. Linux reads the APIC between writes to avoid this, as per
+ * the documentation. Make sure you preserve this as it affects
+ * the C stepping chips too.
+ * 12AP. not affected - worked around in hardware
+ * 13AP. not affected - worked around in hardware
+ * 14AP. we always deassert INIT during bootup
+ * 15AP. not affected - worked around in hardware
+ * 16AP. not affected - worked around in hardware
+ * 17AP. not affected - worked around in hardware
+ * 18AP. not affected - worked around in hardware
+ * 19AP. not affected - worked around in BIOS
+ *
+ * If this sounds worrying believe me these bugs are either ___RARE___,
+ * or are signal timing bugs worked around in hardware and there's
+ * about nothing of note with C stepping upwards.
+ */
+
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, };
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline int __prepare_ICR (unsigned int shortcut, int vector)
+{
+ return APIC_DM_FIXED | shortcut | vector | APIC_DEST_LOGICAL;
+}
+
+static inline int __prepare_ICR2 (unsigned int mask)
+{
+ return SET_APIC_DEST_FIELD(mask);
+}
+
+void __send_IPI_shortcut(unsigned int shortcut, int vector)
+{
+ /*
+ * Subtle. In the case of the 'never do double writes' workaround
+ * we have to lock out interrupts to be safe. As we don't care
+ * of the value read we use an atomic rmw access to avoid costly
+ * cli/sti. Otherwise we use an even cheaper single atomic write
+ * to the APIC.
+ */
+ unsigned int cfg;
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ /*
+ * No need to touch the target chip field
+ */
+ cfg = __prepare_ICR(shortcut, vector);
+
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+}
+
+void fastcall send_IPI_self(int vector)
+{
+ __send_IPI_shortcut(APIC_DEST_SELF, vector);
+}
+
+/*
+ * This is only used on smaller machines.
+ */
+void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
+{
+ unsigned long mask = cpus_addr(cpumask)[0];
+ unsigned long cfg;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ /*
+ * prepare target chip field
+ */
+ cfg = __prepare_ICR2(mask);
+ apic_write_around(APIC_ICR2, cfg);
+
+ /*
+ * program the ICR
+ */
+ cfg = __prepare_ICR(0, vector);
+
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+
+ local_irq_restore(flags);
+}
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+ unsigned long cfg, flags;
+ unsigned int query_cpu;
+
+ /*
+ * Hack. The clustered APIC addressing mode doesn't allow us to send
+ * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+ * should be modified to do 1 message per cluster ID - mbligh
+ */
+
+ local_irq_save(flags);
+
+ for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
+ if (cpu_isset(query_cpu, mask)) {
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ /*
+ * prepare target chip field
+ */
+ cfg = __prepare_ICR2(cpu_to_logical_apicid(query_cpu));
+ apic_write_around(APIC_ICR2, cfg);
+
+ /*
+ * program the ICR
+ */
+ cfg = __prepare_ICR(0, vector);
+
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+ }
+ }
+ local_irq_restore(flags);
+}
+
+#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */
+
+/*
+ * Smarter SMP flushing macros.
+ * c/o Linus Torvalds.
+ *
+ * These mean you can really definitely utterly forget about
+ * writing to user space from interrupts. (Its not allowed anyway).
+ *
+ * Optimizations Manfred Spraul <manfred@colorfullife.com>
+ */
+
+static cpumask_t flush_cpumask;
+static struct mm_struct * flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+#define FLUSH_ALL 0xffffffff
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+static inline void leave_mm (unsigned long cpu)
+{
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+ BUG();
+ cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+ load_cr3(swapper_pg_dir);
+}
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * Stop ipi delivery for the old mm. This is not synchronized with
+ * the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * for the wrong mm, and in the worst case we perform a superflous
+ * tlb flush.
+ * 1a2) set cpu_tlbstate to TLBSTATE_OK
+ * Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ * was in lazy tlb mode.
+ * 1a3) update cpu_tlbstate[].active_mm
+ * Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ * cpu_tlbstate[].active_mm is correct, cpu0 already handles
+ * flush ipis.
+ * 1b1) set cpu_tlbstate to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * Atomically set the bit [other cpus will start sending flush ipis],
+ * and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ * runs in kernel space, the cpu could load tlb entries for user space
+ * pages.
+ *
+ * The good news is that cpu_tlbstate is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ */
+
+fastcall void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+ unsigned long cpu;
+
+ cpu = get_cpu();
+
+ if (!cpu_isset(cpu, flush_cpumask))
+ goto out;
+ /*
+ * This was a BUG() but until someone can quote me the
+ * line from the intel manual that guarantees an IPI to
+ * multiple CPUs is retried _only_ on the erroring CPUs
+ * its staying as a return
+ *
+ * BUG();
+ */
+
+ if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+ if (flush_va == FLUSH_ALL)
+ local_flush_tlb();
+ else
+ __flush_tlb_one(flush_va);
+ } else
+ leave_mm(cpu);
+ }
+ ack_APIC_irq();
+ smp_mb__before_clear_bit();
+ cpu_clear(cpu, flush_cpumask);
+ smp_mb__after_clear_bit();
+out:
+ put_cpu_no_resched();
+}
+
+static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+ unsigned long va)
+{
+ cpumask_t tmp;
+ /*
+ * A couple of (to be removed) sanity checks:
+ *
+ * - we do not send IPIs to not-yet booted CPUs.
+ * - current CPU must not be in mask
+ * - mask must exist :)
+ */
+ BUG_ON(cpus_empty(cpumask));
+
+ cpus_and(tmp, cpumask, cpu_online_map);
+ BUG_ON(!cpus_equal(cpumask, tmp));
+ BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+ BUG_ON(!mm);
+
+ /*
+ * i'm not happy about this global shared spinlock in the
+ * MM hot path, but we'll see how contended it is.
+ * Temporarily this turns IRQs off, so that lockups are
+ * detected by the NMI watchdog.
+ */
+ spin_lock(&tlbstate_lock);
+
+ flush_mm = mm;
+ flush_va = va;
+#if NR_CPUS <= BITS_PER_LONG
+ atomic_set_mask(cpumask, &flush_cpumask);
+#else
+ {
+ int k;
+ unsigned long *flush_mask = (unsigned long *)&flush_cpumask;
+ unsigned long *cpu_mask = (unsigned long *)&cpumask;
+ for (k = 0; k < BITS_TO_LONGS(NR_CPUS); ++k)
+ atomic_set_mask(cpu_mask[k], &flush_mask[k]);
+ }
+#endif
+ /*
+ * We have to send the IPI only to
+ * CPUs affected.
+ */
+ send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
+
+ while (!cpus_empty(flush_cpumask))
+ /* nothing. lockup detection does not belong here */
+ mb();
+
+ flush_mm = NULL;
+ flush_va = 0;
+ spin_unlock(&tlbstate_lock);
+}
+
+void flush_tlb_current_task(void)
+{
+ struct mm_struct *mm = current->mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ local_flush_tlb();
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+ preempt_enable();
+}
+
+void flush_tlb_mm (struct mm_struct * mm)
+{
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ local_flush_tlb();
+ else
+ leave_mm(smp_processor_id());
+ }
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+
+ preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if(current->mm)
+ __flush_tlb_one(va);
+ else
+ leave_mm(smp_processor_id());
+ }
+
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, va);
+
+ preempt_enable();
+}
+
+static void do_flush_tlb_all(void* info)
+{
+ unsigned long cpu = smp_processor_id();
+
+ __flush_tlb_all();
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+ leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+ on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+void smp_send_reschedule(int cpu)
+{
+ send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+ void (*func) (void *info);
+ void *info;
+ atomic_t started;
+ atomic_t finished;
+ int wait;
+};
+
+static struct call_data_struct * call_data;
+
+/*
+ * this function sends a 'generic call function' IPI to all other CPUs
+ * in the system.
+ */
+
+int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+/*
+ * [SUMMARY] Run a function on all other CPUs.
+ * <func> The function to run. This must be fast and non-blocking.
+ * <info> An arbitrary pointer to pass to the function.
+ * <nonatomic> currently unused.
+ * <wait> If true, wait (atomically) until function has completed on other CPUs.
+ * [RETURNS] 0 on success, else a negative status code. Does not return until
+ * remote CPUs are nearly ready to execute <<func>> or are or have executed.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+{
+ struct call_data_struct data;
+ int cpus = num_online_cpus()-1;
+
+ if (!cpus)
+ return 0;
+
+ /* Can deadlock when called with interrupts disabled */
+ WARN_ON(irqs_disabled());
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ spin_lock(&call_lock);
+ call_data = &data;
+ mb();
+
+ /* Send a message to all other CPUs and wait for them to respond */
+ send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (wait)
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+ spin_unlock(&call_lock);
+
+ return 0;
+}
+
+static void stop_this_cpu (void * dummy)
+{
+ /*
+ * Remove this CPU:
+ */
+ cpu_clear(smp_processor_id(), cpu_online_map);
+ local_irq_disable();
+ disable_local_APIC();
+ if (cpu_data[smp_processor_id()].hlt_works_ok)
+ for(;;) __asm__("hlt");
+ for (;;);
+}
+
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+void smp_send_stop(void)
+{
+ smp_call_function(stop_this_cpu, NULL, 1, 0);
+
+ local_irq_disable();
+ disable_local_APIC();
+ local_irq_enable();
+}
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+fastcall void smp_reschedule_interrupt(struct pt_regs *regs)
+{
+ ack_APIC_irq();
+}
+
+fastcall void smp_call_function_interrupt(struct pt_regs *regs)
+{
+ void (*func) (void *info) = call_data->func;
+ void *info = call_data->info;
+ int wait = call_data->wait;
+
+ ack_APIC_irq();
+ /*
+ * Notify initiating CPU that I've grabbed the data and am
+ * about to execute the function
+ */
+ mb();
+ atomic_inc(&call_data->started);
+ /*
+ * At this point the info structure may be out of scope unless wait==1
+ */
+ irq_enter();
+ (*func)(info);
+ irq_exit();
+
+ if (wait) {
+ mb();
+ atomic_inc(&call_data->finished);
+ }
+}
+
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
new file mode 100644
index 0000000..332ee7a
--- /dev/null
+++ b/arch/i386/kernel/smpboot.c
@@ -0,0 +1,1145 @@
+/*
+ * x86 SMP booting functions
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ * Much of the core SMP work is based on previous work by Thomas Radke, to
+ * whom a great many thanks are extended.
+ *
+ * Thanks to Intel for making available several different Pentium,
+ * Pentium Pro and Pentium-II/Xeon MP machines.
+ * Original development of Linux SMP code supported by Caldera.
+ *
+ * This code is released under the GNU General Public License version 2 or
+ * later.
+ *
+ * Fixes
+ * Felix Koop : NR_CPUS used properly
+ * Jose Renau : Handle single CPU case.
+ * Alan Cox : By repeated request 8) - Total BogoMIPS report.
+ * Greg Wright : Fix for kernel stacks panic.
+ * Erich Boleyn : MP v1.4 and additional changes.
+ * Matthias Sattler : Changes for 2.1 kernel map.
+ * Michel Lespinasse : Changes for 2.1 kernel map.
+ * Michael Chastain : Change trampoline.S to gnu as.
+ * Alan Cox : Dumb bug: 'B' step PPro's are fine
+ * Ingo Molnar : Added APIC timers, based on code
+ * from Jose Renau
+ * Ingo Molnar : various cleanups and rewrites
+ * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug.
+ * Maciej W. Rozycki : Bits for genuine 82489DX APICs
+ * Martin J. Bligh : Added support for multi-quad systems
+ * Dave Jones : Report invalid combinations of Athlon CPUs.
+* Rusty Russell : Hacked into shape for new "hotplug" boot process. */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/smp_lock.h>
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <asm/tlbflush.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+
+#include <mach_apic.h>
+#include <mach_wakecpu.h>
+#include <smpboot_hooks.h>
+
+/* Set if we find a B stepping CPU */
+static int __initdata smp_b_stepping;
+
+/* Number of siblings per CPU package */
+int smp_num_siblings = 1;
+int phys_proc_id[NR_CPUS]; /* Package ID of each logical CPU */
+EXPORT_SYMBOL(phys_proc_id);
+
+/* bitmap of online cpus */
+cpumask_t cpu_online_map;
+
+cpumask_t cpu_callin_map;
+cpumask_t cpu_callout_map;
+static cpumask_t smp_commenced_mask;
+
+/* Per CPU bogomips and other parameters */
+struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
+
+u8 x86_cpu_to_apicid[NR_CPUS] =
+ { [0 ... NR_CPUS-1] = 0xff };
+EXPORT_SYMBOL(x86_cpu_to_apicid);
+
+/*
+ * Trampoline 80x86 program as an array.
+ */
+
+extern unsigned char trampoline_data [];
+extern unsigned char trampoline_end [];
+static unsigned char *trampoline_base;
+static int trampoline_exec;
+
+static void map_cpu_to_logical_apicid(void);
+
+/*
+ * Currently trivial. Write the real->protected mode
+ * bootstrap into the page concerned. The caller
+ * has made sure it's suitably aligned.
+ */
+
+static unsigned long __init setup_trampoline(void)
+{
+ memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
+ return virt_to_phys(trampoline_base);
+}
+
+/*
+ * We are called very early to get the low memory for the
+ * SMP bootup trampoline page.
+ */
+void __init smp_alloc_memory(void)
+{
+ trampoline_base = (void *) alloc_bootmem_low_pages(PAGE_SIZE);
+ /*
+ * Has to be in very low memory so we can execute
+ * real-mode AP code.
+ */
+ if (__pa(trampoline_base) >= 0x9F000)
+ BUG();
+ /*
+ * Make the SMP trampoline executable:
+ */
+ trampoline_exec = set_kernel_exec((unsigned long)trampoline_base, 1);
+}
+
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
+
+static void __init smp_store_cpu_info(int id)
+{
+ struct cpuinfo_x86 *c = cpu_data + id;
+
+ *c = boot_cpu_data;
+ if (id!=0)
+ identify_cpu(c);
+ /*
+ * Mask B, Pentium, but not Pentium MMX
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ c->x86 == 5 &&
+ c->x86_mask >= 1 && c->x86_mask <= 4 &&
+ c->x86_model <= 3)
+ /*
+ * Remember we have B step Pentia with bugs
+ */
+ smp_b_stepping = 1;
+
+ /*
+ * Certain Athlons might work (for various values of 'work') in SMP
+ * but they are not certified as MP capable.
+ */
+ if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
+
+ /* Athlon 660/661 is valid. */
+ if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
+ goto valid_k7;
+
+ /* Duron 670 is valid */
+ if ((c->x86_model==7) && (c->x86_mask==0))
+ goto valid_k7;
+
+ /*
+ * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
+ * It's worth noting that the A5 stepping (662) of some Athlon XP's
+ * have the MP bit set.
+ * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
+ */
+ if (((c->x86_model==6) && (c->x86_mask>=2)) ||
+ ((c->x86_model==7) && (c->x86_mask>=1)) ||
+ (c->x86_model> 7))
+ if (cpu_has_mp)
+ goto valid_k7;
+
+ /* If we get here, it's not a certified SMP capable AMD system. */
+ tainted |= TAINT_UNSAFE_SMP;
+ }
+
+valid_k7:
+ ;
+}
+
+/*
+ * TSC synchronization.
+ *
+ * We first check whether all CPUs have their TSC's synchronized,
+ * then we print a warning if not, and always resync.
+ */
+
+static atomic_t tsc_start_flag = ATOMIC_INIT(0);
+static atomic_t tsc_count_start = ATOMIC_INIT(0);
+static atomic_t tsc_count_stop = ATOMIC_INIT(0);
+static unsigned long long tsc_values[NR_CPUS];
+
+#define NR_LOOPS 5
+
+static void __init synchronize_tsc_bp (void)
+{
+ int i;
+ unsigned long long t0;
+ unsigned long long sum, avg;
+ long long delta;
+ unsigned long one_usec;
+ int buggy = 0;
+
+ printk(KERN_INFO "checking TSC synchronization across %u CPUs: ", num_booting_cpus());
+
+ /* convert from kcyc/sec to cyc/usec */
+ one_usec = cpu_khz / 1000;
+
+ atomic_set(&tsc_start_flag, 1);
+ wmb();
+
+ /*
+ * We loop a few times to get a primed instruction cache,
+ * then the last pass is more or less synchronized and
+ * the BP and APs set their cycle counters to zero all at
+ * once. This reduces the chance of having random offsets
+ * between the processors, and guarantees that the maximum
+ * delay between the cycle counters is never bigger than
+ * the latency of information-passing (cachelines) between
+ * two CPUs.
+ */
+ for (i = 0; i < NR_LOOPS; i++) {
+ /*
+ * all APs synchronize but they loop on '== num_cpus'
+ */
+ while (atomic_read(&tsc_count_start) != num_booting_cpus()-1)
+ mb();
+ atomic_set(&tsc_count_stop, 0);
+ wmb();
+ /*
+ * this lets the APs save their current TSC:
+ */
+ atomic_inc(&tsc_count_start);
+
+ rdtscll(tsc_values[smp_processor_id()]);
+ /*
+ * We clear the TSC in the last loop:
+ */
+ if (i == NR_LOOPS-1)
+ write_tsc(0, 0);
+
+ /*
+ * Wait for all APs to leave the synchronization point:
+ */
+ while (atomic_read(&tsc_count_stop) != num_booting_cpus()-1)
+ mb();
+ atomic_set(&tsc_count_start, 0);
+ wmb();
+ atomic_inc(&tsc_count_stop);
+ }
+
+ sum = 0;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (cpu_isset(i, cpu_callout_map)) {
+ t0 = tsc_values[i];
+ sum += t0;
+ }
+ }
+ avg = sum;
+ do_div(avg, num_booting_cpus());
+
+ sum = 0;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_isset(i, cpu_callout_map))
+ continue;
+ delta = tsc_values[i] - avg;
+ if (delta < 0)
+ delta = -delta;
+ /*
+ * We report bigger than 2 microseconds clock differences.
+ */
+ if (delta > 2*one_usec) {
+ long realdelta;
+ if (!buggy) {
+ buggy = 1;
+ printk("\n");
+ }
+ realdelta = delta;
+ do_div(realdelta, one_usec);
+ if (tsc_values[i] < avg)
+ realdelta = -realdelta;
+
+ printk(KERN_INFO "CPU#%d had %ld usecs TSC skew, fixed it up.\n", i, realdelta);
+ }
+
+ sum += delta;
+ }
+ if (!buggy)
+ printk("passed.\n");
+}
+
+static void __init synchronize_tsc_ap (void)
+{
+ int i;
+
+ /*
+ * Not every cpu is online at the time
+ * this gets called, so we first wait for the BP to
+ * finish SMP initialization:
+ */
+ while (!atomic_read(&tsc_start_flag)) mb();
+
+ for (i = 0; i < NR_LOOPS; i++) {
+ atomic_inc(&tsc_count_start);
+ while (atomic_read(&tsc_count_start) != num_booting_cpus())
+ mb();
+
+ rdtscll(tsc_values[smp_processor_id()]);
+ if (i == NR_LOOPS-1)
+ write_tsc(0, 0);
+
+ atomic_inc(&tsc_count_stop);
+ while (atomic_read(&tsc_count_stop) != num_booting_cpus()) mb();
+ }
+}
+#undef NR_LOOPS
+
+extern void calibrate_delay(void);
+
+static atomic_t init_deasserted;
+
+static void __init smp_callin(void)
+{
+ int cpuid, phys_id;
+ unsigned long timeout;
+
+ /*
+ * If waken up by an INIT in an 82489DX configuration
+ * we may get here before an INIT-deassert IPI reaches
+ * our local APIC. We have to wait for the IPI or we'll
+ * lock up on an APIC access.
+ */
+ wait_for_init_deassert(&init_deasserted);
+
+ /*
+ * (This works even if the APIC is not enabled.)
+ */
+ phys_id = GET_APIC_ID(apic_read(APIC_ID));
+ cpuid = smp_processor_id();
+ if (cpu_isset(cpuid, cpu_callin_map)) {
+ printk("huh, phys CPU#%d, CPU#%d already present??\n",
+ phys_id, cpuid);
+ BUG();
+ }
+ Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+
+ /*
+ * STARTUP IPIs are fragile beasts as they might sometimes
+ * trigger some glue motherboard logic. Complete APIC bus
+ * silence for 1 second, this overestimates the time the
+ * boot CPU is spending to send the up to 2 STARTUP IPIs
+ * by a factor of two. This should be enough.
+ */
+
+ /*
+ * Waiting 2s total for startup (udelay is not yet working)
+ */
+ timeout = jiffies + 2*HZ;
+ while (time_before(jiffies, timeout)) {
+ /*
+ * Has the boot CPU finished it's STARTUP sequence?
+ */
+ if (cpu_isset(cpuid, cpu_callout_map))
+ break;
+ rep_nop();
+ }
+
+ if (!time_before(jiffies, timeout)) {
+ printk("BUG: CPU%d started up but did not get a callout!\n",
+ cpuid);
+ BUG();
+ }
+
+ /*
+ * the boot CPU has finished the init stage and is spinning
+ * on callin_map until we finish. We are free to set up this
+ * CPU, first the APIC. (this is probably redundant on most
+ * boards)
+ */
+
+ Dprintk("CALLIN, before setup_local_APIC().\n");
+ smp_callin_clear_local_apic();
+ setup_local_APIC();
+ map_cpu_to_logical_apicid();
+
+ /*
+ * Get our bogomips.
+ */
+ calibrate_delay();
+ Dprintk("Stack at about %p\n",&cpuid);
+
+ /*
+ * Save our processor parameters
+ */
+ smp_store_cpu_info(cpuid);
+
+ disable_APIC_timer();
+
+ /*
+ * Allow the master to continue.
+ */
+ cpu_set(cpuid, cpu_callin_map);
+
+ /*
+ * Synchronize the TSC with the BP
+ */
+ if (cpu_has_tsc && cpu_khz)
+ synchronize_tsc_ap();
+}
+
+static int cpucount;
+
+/*
+ * Activate a secondary processor.
+ */
+static void __init start_secondary(void *unused)
+{
+ /*
+ * Dont put anything before smp_callin(), SMP
+ * booting is too fragile that we want to limit the
+ * things done here to the most necessary things.
+ */
+ cpu_init();
+ smp_callin();
+ while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
+ rep_nop();
+ setup_secondary_APIC_clock();
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ enable_NMI_through_LVT0(NULL);
+ enable_8259A_irq(0);
+ }
+ enable_APIC_timer();
+ /*
+ * low-memory mappings have been cleared, flush them from
+ * the local TLBs too.
+ */
+ local_flush_tlb();
+ cpu_set(smp_processor_id(), cpu_online_map);
+
+ /* We can take interrupts now: we're officially "up". */
+ local_irq_enable();
+
+ wmb();
+ cpu_idle();
+}
+
+/*
+ * Everything has been set up for the secondary
+ * CPUs - they just need to reload everything
+ * from the task structure
+ * This function must not return.
+ */
+void __init initialize_secondary(void)
+{
+ /*
+ * We don't actually need to load the full TSS,
+ * basically just the stack pointer and the eip.
+ */
+
+ asm volatile(
+ "movl %0,%%esp\n\t"
+ "jmp *%1"
+ :
+ :"r" (current->thread.esp),"r" (current->thread.eip));
+}
+
+extern struct {
+ void * esp;
+ unsigned short ss;
+} stack_start;
+
+#ifdef CONFIG_NUMA
+
+/* which logical CPUs are on which nodes */
+cpumask_t node_2_cpu_mask[MAX_NUMNODES] =
+ { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
+/* which node each logical CPU is on */
+int cpu_2_node[NR_CPUS] = { [0 ... NR_CPUS-1] = 0 };
+EXPORT_SYMBOL(cpu_2_node);
+
+/* set up a mapping between cpu and node. */
+static inline void map_cpu_to_node(int cpu, int node)
+{
+ printk("Mapping cpu %d to node %d\n", cpu, node);
+ cpu_set(cpu, node_2_cpu_mask[node]);
+ cpu_2_node[cpu] = node;
+}
+
+/* undo a mapping between cpu and node. */
+static inline void unmap_cpu_to_node(int cpu)
+{
+ int node;
+
+ printk("Unmapping cpu %d from all nodes\n", cpu);
+ for (node = 0; node < MAX_NUMNODES; node ++)
+ cpu_clear(cpu, node_2_cpu_mask[node]);
+ cpu_2_node[cpu] = 0;
+}
+#else /* !CONFIG_NUMA */
+
+#define map_cpu_to_node(cpu, node) ({})
+#define unmap_cpu_to_node(cpu) ({})
+
+#endif /* CONFIG_NUMA */
+
+u8 cpu_2_logical_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+
+static void map_cpu_to_logical_apicid(void)
+{
+ int cpu = smp_processor_id();
+ int apicid = logical_smp_processor_id();
+
+ cpu_2_logical_apicid[cpu] = apicid;
+ map_cpu_to_node(cpu, apicid_to_node(apicid));
+}
+
+static void unmap_cpu_to_logical_apicid(int cpu)
+{
+ cpu_2_logical_apicid[cpu] = BAD_APICID;
+ unmap_cpu_to_node(cpu);
+}
+
+#if APIC_DEBUG
+static inline void __inquire_remote_apic(int apicid)
+{
+ int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+ char *names[] = { "ID", "VERSION", "SPIV" };
+ int timeout, status;
+
+ printk("Inquiring remote APIC #%d...\n", apicid);
+
+ for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) {
+ printk("... APIC #%d %s: ", apicid, names[i]);
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+ apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+
+ timeout = 0;
+ do {
+ udelay(100);
+ status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
+ } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
+
+ switch (status) {
+ case APIC_ICR_RR_VALID:
+ status = apic_read(APIC_RRR);
+ printk("%08x\n", status);
+ break;
+ default:
+ printk("failed\n");
+ }
+ }
+}
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_NMI
+/*
+ * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
+ * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
+ * won't ... remember to clear down the APIC, etc later.
+ */
+static int __init
+wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
+{
+ unsigned long send_status = 0, accept_status = 0;
+ int timeout, maxlvt;
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+
+ /* Boot on the stack */
+ /* Kick the second */
+ apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+
+ Dprintk("Waiting for send to finish...\n");
+ timeout = 0;
+ do {
+ Dprintk("+");
+ udelay(100);
+ send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+ } while (send_status && (timeout++ < 1000));
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(200);
+ /*
+ * Due to the Pentium erratum 3AP.
+ */
+ maxlvt = get_maxlvt();
+ if (maxlvt > 3) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ }
+ accept_status = (apic_read(APIC_ESR) & 0xEF);
+ Dprintk("NMI sent.\n");
+
+ if (send_status)
+ printk("APIC never delivered???\n");
+ if (accept_status)
+ printk("APIC delivery error (%lx).\n", accept_status);
+
+ return (send_status | accept_status);
+}
+#endif /* WAKE_SECONDARY_VIA_NMI */
+
+#ifdef WAKE_SECONDARY_VIA_INIT
+static int __init
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+ unsigned long send_status = 0, accept_status = 0;
+ int maxlvt, timeout, num_starts, j;
+
+ /*
+ * Be paranoid about clearing APIC errors.
+ */
+ if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
+
+ Dprintk("Asserting INIT.\n");
+
+ /*
+ * Turn INIT on target chip
+ */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /*
+ * Send IPI
+ */
+ apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
+ | APIC_DM_INIT);
+
+ Dprintk("Waiting for send to finish...\n");
+ timeout = 0;
+ do {
+ Dprintk("+");
+ udelay(100);
+ send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+ } while (send_status && (timeout++ < 1000));
+
+ mdelay(10);
+
+ Dprintk("Deasserting INIT.\n");
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /* Send IPI */
+ apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+
+ Dprintk("Waiting for send to finish...\n");
+ timeout = 0;
+ do {
+ Dprintk("+");
+ udelay(100);
+ send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+ } while (send_status && (timeout++ < 1000));
+
+ atomic_set(&init_deasserted, 1);
+
+ /*
+ * Should we send STARTUP IPIs ?
+ *
+ * Determine this based on the APIC version.
+ * If we don't have an integrated APIC, don't send the STARTUP IPIs.
+ */
+ if (APIC_INTEGRATED(apic_version[phys_apicid]))
+ num_starts = 2;
+ else
+ num_starts = 0;
+
+ /*
+ * Run STARTUP IPI loop.
+ */
+ Dprintk("#startup loops: %d.\n", num_starts);
+
+ maxlvt = get_maxlvt();
+
+ for (j = 1; j <= num_starts; j++) {
+ Dprintk("Sending STARTUP #%d.\n",j);
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ Dprintk("After apic_write.\n");
+
+ /*
+ * STARTUP IPI
+ */
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /* Boot on the stack */
+ /* Kick the second */
+ apic_write_around(APIC_ICR, APIC_DM_STARTUP
+ | (start_eip >> 12));
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(300);
+
+ Dprintk("Startup point 1.\n");
+
+ Dprintk("Waiting for send to finish...\n");
+ timeout = 0;
+ do {
+ Dprintk("+");
+ udelay(100);
+ send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+ } while (send_status && (timeout++ < 1000));
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(200);
+ /*
+ * Due to the Pentium erratum 3AP.
+ */
+ if (maxlvt > 3) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ }
+ accept_status = (apic_read(APIC_ESR) & 0xEF);
+ if (send_status || accept_status)
+ break;
+ }
+ Dprintk("After Startup.\n");
+
+ if (send_status)
+ printk("APIC never delivered???\n");
+ if (accept_status)
+ printk("APIC delivery error (%lx).\n", accept_status);
+
+ return (send_status | accept_status);
+}
+#endif /* WAKE_SECONDARY_VIA_INIT */
+
+extern cpumask_t cpu_initialized;
+
+static int __init do_boot_cpu(int apicid)
+/*
+ * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
+ * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
+ * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
+ */
+{
+ struct task_struct *idle;
+ unsigned long boot_error;
+ int timeout, cpu;
+ unsigned long start_eip;
+ unsigned short nmi_high = 0, nmi_low = 0;
+
+ cpu = ++cpucount;
+ /*
+ * We can't use kernel_thread since we must avoid to
+ * reschedule the child.
+ */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle))
+ panic("failed fork for CPU %d", cpu);
+ idle->thread.eip = (unsigned long) start_secondary;
+ /* start_eip had better be page-aligned! */
+ start_eip = setup_trampoline();
+
+ /* So we see what's up */
+ printk("Booting processor %d/%d eip %lx\n", cpu, apicid, start_eip);
+ /* Stack for startup_32 can be just as for start_secondary onwards */
+ stack_start.esp = (void *) idle->thread.esp;
+
+ irq_ctx_init(cpu);
+
+ /*
+ * This grunge runs the startup process for
+ * the targeted processor.
+ */
+
+ atomic_set(&init_deasserted, 0);
+
+ Dprintk("Setting warm reset code and vector.\n");
+
+ store_NMI_vector(&nmi_high, &nmi_low);
+
+ smpboot_setup_warm_reset_vector(start_eip);
+
+ /*
+ * Starting actual IPI sequence...
+ */
+ boot_error = wakeup_secondary_cpu(apicid, start_eip);
+
+ if (!boot_error) {
+ /*
+ * allow APs to start initializing.
+ */
+ Dprintk("Before Callout %d.\n", cpu);
+ cpu_set(cpu, cpu_callout_map);
+ Dprintk("After Callout %d.\n", cpu);
+
+ /*
+ * Wait 5s total for a response
+ */
+ for (timeout = 0; timeout < 50000; timeout++) {
+ if (cpu_isset(cpu, cpu_callin_map))
+ break; /* It has booted */
+ udelay(100);
+ }
+
+ if (cpu_isset(cpu, cpu_callin_map)) {
+ /* number CPUs logically, starting from 1 (BSP is 0) */
+ Dprintk("OK.\n");
+ printk("CPU%d: ", cpu);
+ print_cpu_info(&cpu_data[cpu]);
+ Dprintk("CPU has booted.\n");
+ } else {
+ boot_error= 1;
+ if (*((volatile unsigned char *)trampoline_base)
+ == 0xA5)
+ /* trampoline started but...? */
+ printk("Stuck ??\n");
+ else
+ /* trampoline code not run */
+ printk("Not responding.\n");
+ inquire_remote_apic(apicid);
+ }
+ }
+ x86_cpu_to_apicid[cpu] = apicid;
+ if (boot_error) {
+ /* Try to put things back the way they were before ... */
+ unmap_cpu_to_logical_apicid(cpu);
+ cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
+ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
+ cpucount--;
+ }
+
+ /* mark "stuck" area as not stuck */
+ *((volatile unsigned long *)trampoline_base) = 0;
+
+ return boot_error;
+}
+
+static void smp_tune_scheduling (void)
+{
+ unsigned long cachesize; /* kB */
+ unsigned long bandwidth = 350; /* MB/s */
+ /*
+ * Rough estimation for SMP scheduling, this is the number of
+ * cycles it takes for a fully memory-limited process to flush
+ * the SMP-local cache.
+ *
+ * (For a P5 this pretty much means we will choose another idle
+ * CPU almost always at wakeup time (this is due to the small
+ * L1 cache), on PIIs it's around 50-100 usecs, depending on
+ * the cache size)
+ */
+
+ if (!cpu_khz) {
+ /*
+ * this basically disables processor-affinity
+ * scheduling on SMP without a TSC.
+ */
+ return;
+ } else {
+ cachesize = boot_cpu_data.x86_cache_size;
+ if (cachesize == -1) {
+ cachesize = 16; /* Pentiums, 2x8kB cache */
+ bandwidth = 100;
+ }
+ }
+}
+
+/*
+ * Cycle through the processors sending APIC IPIs to boot each.
+ */
+
+static int boot_cpu_logical_apicid;
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+
+cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
+
+static void __init smp_boot_cpus(unsigned int max_cpus)
+{
+ int apicid, cpu, bit, kicked;
+ unsigned long bogosum = 0;
+
+ /*
+ * Setup boot CPU information
+ */
+ smp_store_cpu_info(0); /* Final full version of the data */
+ printk("CPU%d: ", 0);
+ print_cpu_info(&cpu_data[0]);
+
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_logical_apicid = logical_smp_processor_id();
+ x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
+
+ current_thread_info()->cpu = 0;
+ smp_tune_scheduling();
+ cpus_clear(cpu_sibling_map[0]);
+ cpu_set(0, cpu_sibling_map[0]);
+
+ /*
+ * If we couldn't find an SMP configuration at boot time,
+ * get out of here now!
+ */
+ if (!smp_found_config && !acpi_lapic) {
+ printk(KERN_NOTICE "SMP motherboard not detected.\n");
+ smpboot_clear_io_apic_irqs();
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ if (APIC_init_uniprocessor())
+ printk(KERN_NOTICE "Local APIC not detected."
+ " Using dummy APIC emulation.\n");
+ map_cpu_to_logical_apicid();
+ return;
+ }
+
+ /*
+ * Should not be necessary because the MP table should list the boot
+ * CPU too, but we do it for the sake of robustness anyway.
+ * Makes no sense to do this check in clustered apic mode, so skip it
+ */
+ if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+ printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+ boot_cpu_physical_apicid);
+ physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+ }
+
+ /*
+ * If we couldn't find a local APIC, then get out of here now!
+ */
+ if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
+ printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+ smpboot_clear_io_apic_irqs();
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ return;
+ }
+
+ verify_local_APIC();
+
+ /*
+ * If SMP should be disabled, then really disable it!
+ */
+ if (!max_cpus) {
+ smp_found_config = 0;
+ printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
+ smpboot_clear_io_apic_irqs();
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ return;
+ }
+
+ connect_bsp_APIC();
+ setup_local_APIC();
+ map_cpu_to_logical_apicid();
+
+
+ setup_portio_remap();
+
+ /*
+ * Scan the CPU present map and fire up the other CPUs via do_boot_cpu
+ *
+ * In clustered apic mode, phys_cpu_present_map is a constructed thus:
+ * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the
+ * clustered apic ID.
+ */
+ Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
+
+ kicked = 1;
+ for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
+ apicid = cpu_present_to_apicid(bit);
+ /*
+ * Don't even attempt to start the boot CPU!
+ */
+ if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID))
+ continue;
+
+ if (!check_apicid_present(bit))
+ continue;
+ if (max_cpus <= cpucount+1)
+ continue;
+
+ if (do_boot_cpu(apicid))
+ printk("CPU #%d not responding - cannot use it.\n",
+ apicid);
+ else
+ ++kicked;
+ }
+
+ /*
+ * Cleanup possible dangling ends...
+ */
+ smpboot_restore_warm_reset_vector();
+
+ /*
+ * Allow the user to impress friends.
+ */
+ Dprintk("Before bogomips.\n");
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ if (cpu_isset(cpu, cpu_callout_map))
+ bogosum += cpu_data[cpu].loops_per_jiffy;
+ printk(KERN_INFO
+ "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ cpucount+1,
+ bogosum/(500000/HZ),
+ (bogosum/(5000/HZ))%100);
+
+ Dprintk("Before bogocount - setting activated=1.\n");
+
+ if (smp_b_stepping)
+ printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
+
+ /*
+ * Don't taint if we are running SMP kernel on a single non-MP
+ * approved Athlon
+ */
+ if (tainted & TAINT_UNSAFE_SMP) {
+ if (cpucount)
+ printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
+ else
+ tainted &= ~TAINT_UNSAFE_SMP;
+ }
+
+ Dprintk("Boot done.\n");
+
+ /*
+ * construct cpu_sibling_map[], so that we can tell sibling CPUs
+ * efficiently.
+ */
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ cpus_clear(cpu_sibling_map[cpu]);
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ int siblings = 0;
+ int i;
+ if (!cpu_isset(cpu, cpu_callout_map))
+ continue;
+
+ if (smp_num_siblings > 1) {
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_isset(i, cpu_callout_map))
+ continue;
+ if (phys_proc_id[cpu] == phys_proc_id[i]) {
+ siblings++;
+ cpu_set(i, cpu_sibling_map[cpu]);
+ }
+ }
+ } else {
+ siblings++;
+ cpu_set(cpu, cpu_sibling_map[cpu]);
+ }
+
+ if (siblings != smp_num_siblings)
+ printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
+ }
+
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ check_nmi_watchdog();
+
+ smpboot_setup_io_apic();
+
+ setup_boot_APIC_clock();
+
+ /*
+ * Synchronize the TSC with the AP
+ */
+ if (cpu_has_tsc && cpucount && cpu_khz)
+ synchronize_tsc_bp();
+}
+
+/* These are wrappers to interface to the new boot process. Someone
+ who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ smp_boot_cpus(max_cpus);
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+ cpu_set(smp_processor_id(), cpu_online_map);
+ cpu_set(smp_processor_id(), cpu_callout_map);
+}
+
+int __devinit __cpu_up(unsigned int cpu)
+{
+ /* This only works at boot for x86. See "rewrite" above. */
+ if (cpu_isset(cpu, smp_commenced_mask)) {
+ local_irq_enable();
+ return -ENOSYS;
+ }
+
+ /* In case one didn't come up */
+ if (!cpu_isset(cpu, cpu_callin_map)) {
+ local_irq_enable();
+ return -EIO;
+ }
+
+ local_irq_enable();
+ /* Unleash the CPU! */
+ cpu_set(cpu, smp_commenced_mask);
+ while (!cpu_isset(cpu, cpu_online_map))
+ mb();
+ return 0;
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+#ifdef CONFIG_X86_IO_APIC
+ setup_ioapic_dest();
+#endif
+ zap_low_mappings();
+ /*
+ * Disable executability of the SMP trampoline:
+ */
+ set_kernel_exec((unsigned long)trampoline_base, trampoline_exec);
+}
+
+void __init smp_intr_init(void)
+{
+ /*
+ * IRQ0 must be given a fixed assignment and initialized,
+ * because it's used before the IO-APIC is set up.
+ */
+ set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPI for invalidation */
+ set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+ /* IPI for generic function call */
+ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+}
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
new file mode 100644
index 0000000..7b3b27d
--- /dev/null
+++ b/arch/i386/kernel/srat.c
@@ -0,0 +1,456 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/acpi.h>
+#include <linux/nodemask.h>
+#include <asm/srat.h>
+#include <asm/topology.h>
+
+/*
+ * proximity macros and definitions
+ */
+#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
+#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
+#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
+#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
+#define MAX_PXM_DOMAINS 256 /* 1 byte and no promises about values */
+/* bitmap length; _PXM is at most 255 */
+#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8)
+static u8 pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */
+
+#define MAX_CHUNKS_PER_NODE 4
+#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
+struct node_memory_chunk_s {
+ unsigned long start_pfn;
+ unsigned long end_pfn;
+ u8 pxm; // proximity domain of node
+ u8 nid; // which cnode contains this chunk?
+ u8 bank; // which mem bank on this node
+};
+static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
+
+static int num_memory_chunks; /* total number of memory chunks */
+static int zholes_size_init;
+static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES];
+
+extern void * boot_ioremap(unsigned long, unsigned long);
+
+/* Identify CPU proximity domains */
+static void __init parse_cpu_affinity_structure(char *p)
+{
+ struct acpi_table_processor_affinity *cpu_affinity =
+ (struct acpi_table_processor_affinity *) p;
+
+ if (!cpu_affinity->flags.enabled)
+ return; /* empty entry */
+
+ /* mark this node as "seen" in node bitmap */
+ BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain);
+
+ printk("CPU 0x%02X in proximity domain 0x%02X\n",
+ cpu_affinity->apic_id, cpu_affinity->proximity_domain);
+}
+
+/*
+ * Identify memory proximity domains and hot-remove capabilities.
+ * Fill node memory chunk list structure.
+ */
+static void __init parse_memory_affinity_structure (char *sratp)
+{
+ unsigned long long paddr, size;
+ unsigned long start_pfn, end_pfn;
+ u8 pxm;
+ struct node_memory_chunk_s *p, *q, *pend;
+ struct acpi_table_memory_affinity *memory_affinity =
+ (struct acpi_table_memory_affinity *) sratp;
+
+ if (!memory_affinity->flags.enabled)
+ return; /* empty entry */
+
+ /* mark this node as "seen" in node bitmap */
+ BMAP_SET(pxm_bitmap, memory_affinity->proximity_domain);
+
+ /* calculate info for memory chunk structure */
+ paddr = memory_affinity->base_addr_hi;
+ paddr = (paddr << 32) | memory_affinity->base_addr_lo;
+ size = memory_affinity->length_hi;
+ size = (size << 32) | memory_affinity->length_lo;
+
+ start_pfn = paddr >> PAGE_SHIFT;
+ end_pfn = (paddr + size) >> PAGE_SHIFT;
+
+ pxm = memory_affinity->proximity_domain;
+
+ if (num_memory_chunks >= MAXCHUNKS) {
+ printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
+ size/(1024*1024), paddr);
+ return;
+ }
+
+ /* Insertion sort based on base address */
+ pend = &node_memory_chunk[num_memory_chunks];
+ for (p = &node_memory_chunk[0]; p < pend; p++) {
+ if (start_pfn < p->start_pfn)
+ break;
+ }
+ if (p < pend) {
+ for (q = pend; q >= p; q--)
+ *(q + 1) = *q;
+ }
+ p->start_pfn = start_pfn;
+ p->end_pfn = end_pfn;
+ p->pxm = pxm;
+
+ num_memory_chunks++;
+
+ printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
+ start_pfn, end_pfn,
+ memory_affinity->memory_type,
+ memory_affinity->proximity_domain,
+ (memory_affinity->flags.hot_pluggable ?
+ "enabled and removable" : "enabled" ) );
+}
+
+#if MAX_NR_ZONES != 3
+#error "MAX_NR_ZONES != 3, chunk_to_zone requires review"
+#endif
+/* Take a chunk of pages from page frame cstart to cend and count the number
+ * of pages in each zone, returned via zones[].
+ */
+static __init void chunk_to_zones(unsigned long cstart, unsigned long cend,
+ unsigned long *zones)
+{
+ unsigned long max_dma;
+ extern unsigned long max_low_pfn;
+
+ int z;
+ unsigned long rend;
+
+ /* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide
+ * similarly scoped information and should be handled in a consistant
+ * manner.
+ */
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+
+ /* Split the hole into the zones in which it falls. Repeatedly
+ * take the segment in which the remaining hole starts, round it
+ * to the end of that zone.
+ */
+ memset(zones, 0, MAX_NR_ZONES * sizeof(long));
+ while (cstart < cend) {
+ if (cstart < max_dma) {
+ z = ZONE_DMA;
+ rend = (cend < max_dma)? cend : max_dma;
+
+ } else if (cstart < max_low_pfn) {
+ z = ZONE_NORMAL;
+ rend = (cend < max_low_pfn)? cend : max_low_pfn;
+
+ } else {
+ z = ZONE_HIGHMEM;
+ rend = cend;
+ }
+ zones[z] += rend - cstart;
+ cstart = rend;
+ }
+}
+
+/*
+ * The SRAT table always lists ascending addresses, so can always
+ * assume that the first "start" address that you see is the real
+ * start of the node, and that the current "end" address is after
+ * the previous one.
+ */
+static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+{
+ /*
+ * Only add present memory as told by the e820.
+ * There is no guarantee from the SRAT that the memory it
+ * enumerates is present at boot time because it represents
+ * *possible* memory hotplug areas the same as normal RAM.
+ */
+ if (memory_chunk->start_pfn >= max_pfn) {
+ printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n",
+ memory_chunk->start_pfn, memory_chunk->end_pfn);
+ return;
+ }
+ if (memory_chunk->nid != nid)
+ return;
+
+ if (!node_has_online_mem(nid))
+ node_start_pfn[nid] = memory_chunk->start_pfn;
+
+ if (node_start_pfn[nid] > memory_chunk->start_pfn)
+ node_start_pfn[nid] = memory_chunk->start_pfn;
+
+ if (node_end_pfn[nid] < memory_chunk->end_pfn)
+ node_end_pfn[nid] = memory_chunk->end_pfn;
+}
+
+/* Parse the ACPI Static Resource Affinity Table */
+static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
+{
+ u8 *start, *end, *p;
+ int i, j, nid;
+ u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */
+ u8 nid_to_pxm_map[MAX_NUMNODES];/* logical node ID to _PXM map */
+
+ start = (u8 *)(&(sratp->reserved) + 1); /* skip header */
+ p = start;
+ end = (u8 *)sratp + sratp->header.length;
+
+ memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */
+ memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
+ memset(zholes_size, 0, sizeof(zholes_size));
+
+ /* -1 in these maps means not available */
+ memset(pxm_to_nid_map, -1, sizeof(pxm_to_nid_map));
+ memset(nid_to_pxm_map, -1, sizeof(nid_to_pxm_map));
+
+ num_memory_chunks = 0;
+ while (p < end) {
+ switch (*p) {
+ case ACPI_SRAT_PROCESSOR_AFFINITY:
+ parse_cpu_affinity_structure(p);
+ break;
+ case ACPI_SRAT_MEMORY_AFFINITY:
+ parse_memory_affinity_structure(p);
+ break;
+ default:
+ printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]);
+ break;
+ }
+ p += p[1];
+ if (p[1] == 0) {
+ printk("acpi20_parse_srat: Entry length value is zero;"
+ " can't parse any further!\n");
+ break;
+ }
+ }
+
+ if (num_memory_chunks == 0) {
+ printk("could not finy any ACPI SRAT memory areas.\n");
+ goto out_fail;
+ }
+
+ /* Calculate total number of nodes in system from PXM bitmap and create
+ * a set of sequential node IDs starting at zero. (ACPI doesn't seem
+ * to specify the range of _PXM values.)
+ */
+ /*
+ * MCD - we no longer HAVE to number nodes sequentially. PXM domain
+ * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
+ * 32, so we will continue numbering them in this manner until MAX_NUMNODES
+ * approaches MAX_PXM_DOMAINS for i386.
+ */
+ nodes_clear(node_online_map);
+ for (i = 0; i < MAX_PXM_DOMAINS; i++) {
+ if (BMAP_TEST(pxm_bitmap, i)) {
+ nid = num_online_nodes();
+ pxm_to_nid_map[i] = nid;
+ nid_to_pxm_map[nid] = i;
+ node_set_online(nid);
+ }
+ }
+ BUG_ON(num_online_nodes() == 0);
+
+ /* set cnode id in memory chunk structure */
+ for (i = 0; i < num_memory_chunks; i++)
+ node_memory_chunk[i].nid = pxm_to_nid_map[node_memory_chunk[i].pxm];
+
+ printk("pxm bitmap: ");
+ for (i = 0; i < sizeof(pxm_bitmap); i++) {
+ printk("%02X ", pxm_bitmap[i]);
+ }
+ printk("\n");
+ printk("Number of logical nodes in system = %d\n", num_online_nodes());
+ printk("Number of memory chunks in system = %d\n", num_memory_chunks);
+
+ for (j = 0; j < num_memory_chunks; j++){
+ struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
+ printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
+ j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
+ node_read_chunk(chunk->nid, chunk);
+ }
+
+ for_each_online_node(nid) {
+ unsigned long start = node_start_pfn[nid];
+ unsigned long end = node_end_pfn[nid];
+
+ memory_present(nid, start, end);
+ node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
+ }
+ return 1;
+out_fail:
+ return 0;
+}
+
+int __init get_memcfg_from_srat(void)
+{
+ struct acpi_table_header *header = NULL;
+ struct acpi_table_rsdp *rsdp = NULL;
+ struct acpi_table_rsdt *rsdt = NULL;
+ struct acpi_pointer *rsdp_address = NULL;
+ struct acpi_table_rsdt saved_rsdt;
+ int tables = 0;
+ int i = 0;
+
+ acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+
+ if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
+ printk("%s: assigning address to rsdp\n", __FUNCTION__);
+ rsdp = (struct acpi_table_rsdp *)
+ (u32)rsdp_address->pointer.physical;
+ } else {
+ printk("%s: rsdp_address is not a physical pointer\n", __FUNCTION__);
+ goto out_err;
+ }
+ if (!rsdp) {
+ printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
+ goto out_err;
+ }
+
+ printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
+ rsdp->oem_id);
+
+ if (strncmp(rsdp->signature, RSDP_SIG,strlen(RSDP_SIG))) {
+ printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
+ goto out_err;
+ }
+
+ rsdt = (struct acpi_table_rsdt *)
+ boot_ioremap(rsdp->rsdt_address, sizeof(struct acpi_table_rsdt));
+
+ if (!rsdt) {
+ printk(KERN_WARNING
+ "%s: ACPI: Invalid root system description tables (RSDT)\n",
+ __FUNCTION__);
+ goto out_err;
+ }
+
+ header = & rsdt->header;
+
+ if (strncmp(header->signature, RSDT_SIG, strlen(RSDT_SIG))) {
+ printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
+ goto out_err;
+ }
+
+ /*
+ * The number of tables is computed by taking the
+ * size of all entries (header size minus total
+ * size of RSDT) divided by the size of each entry
+ * (4-byte table pointers).
+ */
+ tables = (header->length - sizeof(struct acpi_table_header)) / 4;
+
+ if (!tables)
+ goto out_err;
+
+ memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
+
+ if (saved_rsdt.header.length > sizeof(saved_rsdt)) {
+ printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
+ saved_rsdt.header.length);
+ goto out_err;
+ }
+
+ printk("Begin SRAT table scan....\n");
+
+ for (i = 0; i < tables; i++) {
+ /* Map in header, then map in full table length. */
+ header = (struct acpi_table_header *)
+ boot_ioremap(saved_rsdt.entry[i], sizeof(struct acpi_table_header));
+ if (!header)
+ break;
+ header = (struct acpi_table_header *)
+ boot_ioremap(saved_rsdt.entry[i], header->length);
+ if (!header)
+ break;
+
+ if (strncmp((char *) &header->signature, "SRAT", 4))
+ continue;
+
+ /* we've found the srat table. don't need to look at any more tables */
+ return acpi20_parse_srat((struct acpi_table_srat *)header);
+ }
+out_err:
+ printk("failed to get NUMA memory information from SRAT table\n");
+ return 0;
+}
+
+/* For each node run the memory list to determine whether there are
+ * any memory holes. For each hole determine which ZONE they fall
+ * into.
+ *
+ * NOTE#1: this requires knowledge of the zone boundries and so
+ * _cannot_ be performed before those are calculated in setup_memory.
+ *
+ * NOTE#2: we rely on the fact that the memory chunks are ordered by
+ * start pfn number during setup.
+ */
+static void __init get_zholes_init(void)
+{
+ int nid;
+ int c;
+ int first;
+ unsigned long end = 0;
+
+ for_each_online_node(nid) {
+ first = 1;
+ for (c = 0; c < num_memory_chunks; c++){
+ if (node_memory_chunk[c].nid == nid) {
+ if (first) {
+ end = node_memory_chunk[c].end_pfn;
+ first = 0;
+
+ } else {
+ /* Record any gap between this chunk
+ * and the previous chunk on this node
+ * against the zones it spans.
+ */
+ chunk_to_zones(end,
+ node_memory_chunk[c].start_pfn,
+ &zholes_size[nid * MAX_NR_ZONES]);
+ }
+ }
+ }
+ }
+}
+
+unsigned long * __init get_zholes_size(int nid)
+{
+ if (!zholes_size_init) {
+ zholes_size_init++;
+ get_zholes_init();
+ }
+ if (nid >= MAX_NUMNODES || !node_online(nid))
+ printk("%s: nid = %d is invalid/offline. num_online_nodes = %d",
+ __FUNCTION__, nid, num_online_nodes());
+ return &zholes_size[nid * MAX_NR_ZONES];
+}
diff --git a/arch/i386/kernel/summit.c b/arch/i386/kernel/summit.c
new file mode 100644
index 0000000..d0e01a3
--- /dev/null
+++ b/arch/i386/kernel/summit.c
@@ -0,0 +1,180 @@
+/*
+ * arch/i386/kernel/summit.c - IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mach-summit/mach_mpparse.h>
+
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+
+static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+{
+ int twister = 0, node = 0;
+ int i, bus, num_buses;
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+ if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+ twister = rio_devs[i]->owner_id;
+ break;
+ }
+ }
+ if (i == rio_table_hdr->num_rio_dev){
+ printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
+ if (scal_devs[i]->node_id == twister){
+ node = scal_devs[i]->node_id;
+ break;
+ }
+ }
+ if (i == rio_table_hdr->num_scal_dev){
+ printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ switch (rio_devs[wpeg_num]->type){
+ case CompatWPEG:
+ /* The Compatability Winnipeg controls the 2 legacy buses,
+ * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
+ * a PCI-PCI bridge card is used in either slot: total 5 buses.
+ */
+ num_buses = 5;
+ break;
+ case AltWPEG:
+ /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+ * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
+ * the "extra" buses for each of those slots: total 7 buses.
+ */
+ num_buses = 7;
+ break;
+ case LookOutAWPEG:
+ case LookOutBWPEG:
+ /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+ * & the "extra" buses for each of those slots: total 9 buses.
+ */
+ num_buses = 9;
+ break;
+ default:
+ printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ for(bus = last_bus; bus < last_bus + num_buses; bus++)
+ mp_bus_id_to_node[bus] = node;
+ return bus;
+}
+
+static int __init build_detail_arrays(void)
+{
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ return 0;
+ }
+
+ switch (rio_table_hdr->version){
+ default:
+ printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
+ return 0;
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ }
+
+ ptr = (unsigned long)rio_table_hdr + 3;
+ for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+ scal_devs[i] = (struct scal_detail *)ptr;
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+ rio_devs[i] = (struct rio_detail *)ptr;
+
+ return 1;
+}
+
+void __init setup_summit(void)
+{
+ unsigned long ptr;
+ unsigned short offset;
+ int i, next_wpeg, next_bus = 0;
+
+ /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+ ptr = *(unsigned short *)phys_to_virt(0x40Eul);
+ ptr = (unsigned long)phys_to_virt(ptr << 4);
+
+ rio_table_hdr = NULL;
+ offset = 0x180;
+ while (offset){
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+ break;
+ }
+ /* The next offset is stored in the 1st word. 0 means no more */
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr){
+ printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+ return;
+ }
+
+ if (!build_detail_arrays())
+ return;
+
+ /* The first Winnipeg we're looking for has an index of 0 */
+ next_wpeg = 0;
+ do {
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+ if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+ /* It's the Winnipeg we're looking for! */
+ next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
+ next_wpeg++;
+ break;
+ }
+ }
+ /*
+ * If we go through all Rio devices and don't find one with
+ * the next index, it means we've found all the Winnipegs,
+ * and thus all the PCI buses.
+ */
+ if (i == rio_table_hdr->num_rio_dev)
+ next_wpeg = 0;
+ } while (next_wpeg != 0);
+}
diff --git a/arch/i386/kernel/sys_i386.c b/arch/i386/kernel/sys_i386.c
new file mode 100644
index 0000000..a4a6197
--- /dev/null
+++ b/arch/i386/kernel/sys_i386.c
@@ -0,0 +1,252 @@
+/*
+ * linux/arch/i386/kernel/sys_i386.c
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/i386
+ * platform.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage int sys_pipe(unsigned long __user * fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2*sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/* common code for old and new mmaps */
+static inline long do_mmap2(
+ unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file * file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+/*
+ * Perform the select(nd, in, out, ex, tv) and mmap() system
+ * calls. Linux/i386 didn't use to be able to handle more than
+ * 4 system call parameters, so these system calls used a memory
+ * block for parameter passing..
+ */
+
+struct mmap_arg_struct {
+ unsigned long addr;
+ unsigned long len;
+ unsigned long prot;
+ unsigned long flags;
+ unsigned long fd;
+ unsigned long offset;
+};
+
+asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
+{
+ struct mmap_arg_struct a;
+ int err = -EFAULT;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ goto out;
+
+ err = -EINVAL;
+ if (a.offset & ~PAGE_MASK)
+ goto out;
+
+ err = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+out:
+ return err;
+}
+
+
+struct sel_arg_struct {
+ unsigned long n;
+ fd_set __user *inp, *outp, *exp;
+ struct timeval __user *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ /* sys_select() does the appropriate kernel locking */
+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int sys_ipc (uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
+ (const struct timespec __user *)fifth);
+
+ case SEMGET:
+ return sys_semget (first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl (first, second, third, fourth);
+ }
+
+ case MSGSND:
+ return sys_msgsnd (first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof (tmp)))
+ return -EFAULT;
+ return sys_msgrcv (first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv (first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget ((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+ if (ret)
+ return ret;
+ return put_user (raddr, (ulong __user *) third);
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ return -EINVAL;
+ /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
+ return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
+ }
+ case SHMDT:
+ return sys_shmdt ((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget (first, second, third);
+ case SHMCTL:
+ return sys_shmctl (first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -ENOSYS;
+ }
+}
+
+/*
+ * Old cruft
+ */
+asmlinkage int sys_uname(struct old_utsname __user * name)
+{
+ int err;
+ if (!name)
+ return -EFAULT;
+ down_read(&uts_sem);
+ err=copy_to_user(name, &system_utsname, sizeof (*name));
+ up_read(&uts_sem);
+ return err?-EFAULT:0;
+}
+
+asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+{
+ int error;
+
+ if (!name)
+ return -EFAULT;
+ if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+ return -EFAULT;
+
+ down_read(&uts_sem);
+
+ error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
+ error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
+ error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
+ error |= __put_user(0,name->release+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
+ error |= __put_user(0,name->version+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
+ error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+
+ up_read(&uts_sem);
+
+ error = error ? -EFAULT : 0;
+
+ return error;
+}
diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c
new file mode 100644
index 0000000..960d8bd
--- /dev/null
+++ b/arch/i386/kernel/sysenter.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/i386/kernel/sysenter.c
+ *
+ * (C) Copyright 2002 Linus Torvalds
+ *
+ * This file contains the needed initializations to support sysenter.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <linux/gfp.h>
+#include <linux/string.h>
+#include <linux/elf.h>
+
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
+#include <asm/pgtable.h>
+#include <asm/unistd.h>
+
+extern asmlinkage void sysenter_entry(void);
+
+void enable_sep_cpu(void *info)
+{
+ int cpu = get_cpu();
+ struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+ tss->ss1 = __KERNEL_CS;
+ tss->esp1 = sizeof(struct tss_struct) + (unsigned long) tss;
+ wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+ wrmsr(MSR_IA32_SYSENTER_ESP, tss->esp1, 0);
+ wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long) sysenter_entry, 0);
+ put_cpu();
+}
+
+/*
+ * These symbols are defined by vsyscall.o to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vsyscall_int80_start, vsyscall_int80_end;
+extern const char vsyscall_sysenter_start, vsyscall_sysenter_end;
+
+static int __init sysenter_setup(void)
+{
+ void *page = (void *)get_zeroed_page(GFP_ATOMIC);
+
+ __set_fixmap(FIX_VSYSCALL, __pa(page), PAGE_READONLY_EXEC);
+
+ if (!boot_cpu_has(X86_FEATURE_SEP)) {
+ memcpy(page,
+ &vsyscall_int80_start,
+ &vsyscall_int80_end - &vsyscall_int80_start);
+ return 0;
+ }
+
+ memcpy(page,
+ &vsyscall_sysenter_start,
+ &vsyscall_sysenter_end - &vsyscall_sysenter_start);
+
+ on_each_cpu(enable_sep_cpu, NULL, 1, 1);
+ return 0;
+}
+
+__initcall(sysenter_setup);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
new file mode 100644
index 0000000..9b55e30
--- /dev/null
+++ b/arch/i386/kernel/time.c
@@ -0,0 +1,476 @@
+/*
+ * linux/arch/i386/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ *
+ * This file contains the PC-specific time handling details:
+ * reading the RTC at bootup, etc..
+ * 1994-07-02 Alan Modra
+ * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
+ * 1995-03-26 Markus Kuhn
+ * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
+ * precision CMOS clock update
+ * 1996-05-03 Ingo Molnar
+ * fixed time warps in do_[slow|fast]_gettimeoffset()
+ * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
+ * "A Kernel Model for Precision Timekeeping" by Dave Mills
+ * 1998-09-05 (Various)
+ * More robust do_fast_gettimeoffset() algorithm implemented
+ * (works with APM, Cyrix 6x86MX and Centaur C6),
+ * monotonic gettimeofday() with fast_get_timeoffset(),
+ * drift-proof precision TSC calibration on boot
+ * (C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D.
+ * Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>;
+ * ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>).
+ * 1998-12-16 Andrea Arcangeli
+ * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy
+ * because was not accounting lost_ticks.
+ * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli
+ * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to
+ * serialize accesses to xtime/lost_ticks).
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/bcd.h>
+#include <linux/efi.h>
+#include <linux/mca.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/timer.h>
+
+#include "mach_time.h"
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/hpet.h>
+
+#include <asm/arch_hooks.h>
+
+#include "io_ports.h"
+
+extern spinlock_t i8259A_lock;
+int pit_latch_buggy; /* extern */
+
+#include "do_timer.h"
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+unsigned long cpu_khz; /* Detected as we calibrate the TSC */
+
+extern unsigned long wall_jiffies;
+
+DEFINE_SPINLOCK(rtc_lock);
+
+DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
+
+struct timer_opts *cur_timer = &timer_none;
+
+/*
+ * This is a special lock that is owned by the CPU and holds the index
+ * register we are working with. It is required for NMI access to the
+ * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details.
+ */
+volatile unsigned long cmos_lock = 0;
+EXPORT_SYMBOL(cmos_lock);
+
+/* Routines for accessing the CMOS RAM/RTC. */
+unsigned char rtc_cmos_read(unsigned char addr)
+{
+ unsigned char val;
+ lock_cmos_prefix(addr);
+ outb_p(addr, RTC_PORT(0));
+ val = inb_p(RTC_PORT(1));
+ lock_cmos_suffix(addr);
+ return val;
+}
+EXPORT_SYMBOL(rtc_cmos_read);
+
+void rtc_cmos_write(unsigned char val, unsigned char addr)
+{
+ lock_cmos_prefix(addr);
+ outb_p(addr, RTC_PORT(0));
+ outb_p(val, RTC_PORT(1));
+ lock_cmos_suffix(addr);
+}
+EXPORT_SYMBOL(rtc_cmos_write);
+
+/*
+ * This version of gettimeofday has microsecond resolution
+ * and better than microsecond precision on fast x86 machines with TSC.
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long seq;
+ unsigned long usec, sec;
+ unsigned long max_ntp_tick;
+
+ do {
+ unsigned long lost;
+
+ seq = read_seqbegin(&xtime_lock);
+
+ usec = cur_timer->get_offset();
+ lost = jiffies - wall_jiffies;
+
+ /*
+ * If time_adjust is negative then NTP is slowing the clock
+ * so make sure not to go into next possible interval.
+ * Better to lose some accuracy than have time go backwards..
+ */
+ if (unlikely(time_adjust < 0)) {
+ max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
+ usec = min(usec, max_ntp_tick);
+
+ if (lost)
+ usec += lost * max_ntp_tick;
+ }
+ else if (unlikely(lost))
+ usec += lost * (USEC_PER_SEC / HZ);
+
+ sec = xtime.tv_sec;
+ usec += (xtime.tv_nsec / 1000);
+ } while (read_seqretry(&xtime_lock, seq));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= cur_timer->get_offset() * NSEC_PER_USEC;
+ nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+ return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+static int set_rtc_mmss(unsigned long nowtime)
+{
+ int retval;
+
+ WARN_ON(irqs_disabled());
+
+ /* gets recalled with irq locally disabled */
+ spin_lock_irq(&rtc_lock);
+ if (efi_enabled)
+ retval = efi_set_rtc_mmss(nowtime);
+ else
+ retval = mach_set_rtc_mmss(nowtime);
+ spin_unlock_irq(&rtc_lock);
+
+ return retval;
+}
+
+
+int timer_ack;
+
+/* monotonic_clock(): returns # of nanoseconds passed since time_init()
+ * Note: This function is required to return accurate
+ * time even in the absence of multiple timer ticks.
+ */
+unsigned long long monotonic_clock(void)
+{
+ return cur_timer->monotonic_clock();
+}
+EXPORT_SYMBOL(monotonic_clock);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
+unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (in_lock_functions(pc))
+ return *(unsigned long *)(regs->ebp + 4);
+
+ return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_IO_APIC
+ if (timer_ack) {
+ /*
+ * Subtle, when I/O APICs are used we have to ack timer IRQ
+ * manually to reset the IRR bit for do_slow_gettimeoffset().
+ * This will also deassert NMI lines for the watchdog if run
+ * on an 82489DX-based system.
+ */
+ spin_lock(&i8259A_lock);
+ outb(0x0c, PIC_MASTER_OCW3);
+ /* Ack the IRQ; AEOI will end it automatically. */
+ inb(PIC_MASTER_POLL);
+ spin_unlock(&i8259A_lock);
+ }
+#endif
+
+ do_timer_interrupt_hook(regs);
+
+
+ if (MCA_bus) {
+ /* The PS/2 uses level-triggered interrupts. You can't
+ turn them off, nor would you want to (any attempt to
+ enable edge-triggered interrupts usually gets intercepted by a
+ special hardware circuit). Hence we have to acknowledge
+ the timer interrupt. Through some incredibly stupid
+ design idea, the reset for IRQ 0 is done by setting the
+ high bit of the PPI port B (0x61). Note that some PS/2s,
+ notably the 55SX, work fine if this is removed. */
+
+ irq = inb_p( 0x61 ); /* read the current state */
+ outb_p( irq|0x80, 0x61 ); /* reset the IRQ */
+ }
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_seqlock(&xtime_lock);
+
+ cur_timer->mark_offset();
+
+ do_timer_interrupt(irq, NULL, regs);
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+/* not static: needed by APM */
+unsigned long get_cmos_time(void)
+{
+ unsigned long retval;
+
+ spin_lock(&rtc_lock);
+
+ if (efi_enabled)
+ retval = efi_get_time();
+ else
+ retval = mach_get_cmos_time();
+
+ spin_unlock(&rtc_lock);
+
+ return retval;
+}
+static void sync_cmos_clock(unsigned long dummy);
+
+static struct timer_list sync_cmos_timer =
+ TIMER_INITIALIZER(sync_cmos_clock, 0, 0);
+
+static void sync_cmos_clock(unsigned long dummy)
+{
+ struct timeval now, next;
+ int fail = 1;
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ * This code is run on a timer. If the clock is set, that timer
+ * may not expire at the correct time. Thus, we adjust...
+ */
+ if ((time_status & STA_UNSYNC) != 0)
+ /*
+ * Not synced, exit, do not restart a timer (if one is
+ * running, let it run out).
+ */
+ return;
+
+ do_gettimeofday(&now);
+ if (now.tv_usec >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
+ now.tv_usec <= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2)
+ fail = set_rtc_mmss(now.tv_sec);
+
+ next.tv_usec = USEC_AFTER - now.tv_usec;
+ if (next.tv_usec <= 0)
+ next.tv_usec += USEC_PER_SEC;
+
+ if (!fail)
+ next.tv_sec = 659;
+ else
+ next.tv_sec = 0;
+
+ if (next.tv_usec >= USEC_PER_SEC) {
+ next.tv_sec++;
+ next.tv_usec -= USEC_PER_SEC;
+ }
+ mod_timer(&sync_cmos_timer, jiffies + timeval_to_jiffies(&next));
+}
+
+void notify_arch_cmos_timer(void)
+{
+ mod_timer(&sync_cmos_timer, jiffies + 1);
+}
+
+static long clock_cmos_diff, sleep_start;
+
+static int timer_suspend(struct sys_device *dev, u32 state)
+{
+ /*
+ * Estimate time zone so that set_time can update the clock
+ */
+ clock_cmos_diff = -get_cmos_time();
+ clock_cmos_diff += get_seconds();
+ sleep_start = get_cmos_time();
+ return 0;
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+ unsigned long flags;
+ unsigned long sec;
+ unsigned long sleep_length;
+
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled())
+ hpet_reenable();
+#endif
+ sec = get_cmos_time() + clock_cmos_diff;
+ sleep_length = (get_cmos_time() - sleep_start) * HZ;
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = sec;
+ xtime.tv_nsec = 0;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ jiffies += sleep_length;
+ wall_jiffies += sleep_length;
+ return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+ .resume = timer_resume,
+ .suspend = timer_suspend,
+ set_kset_name("timer"),
+};
+
+
+/* XXX this driverfs stuff should probably go elsewhere later -john */
+static struct sys_device device_timer = {
+ .id = 0,
+ .cls = &timer_sysclass,
+};
+
+static int time_init_device(void)
+{
+ int error = sysdev_class_register(&timer_sysclass);
+ if (!error)
+ error = sysdev_register(&device_timer);
+ return error;
+}
+
+device_initcall(time_init_device);
+
+#ifdef CONFIG_HPET_TIMER
+extern void (*late_time_init)(void);
+/* Duplicate of time_init() below, with hpet_enable part added */
+static void __init hpet_time_init(void)
+{
+ xtime.tv_sec = get_cmos_time();
+ xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ if (hpet_enable() >= 0) {
+ printk("Using HPET for base-timer\n");
+ }
+
+ cur_timer = select_timer();
+ printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
+
+ time_init_hook();
+}
+#endif
+
+void __init time_init(void)
+{
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_capable()) {
+ /*
+ * HPET initialization needs to do memory-mapped io. So, let
+ * us do a late initialization after mem_init().
+ */
+ late_time_init = hpet_time_init;
+ return;
+ }
+#endif
+ xtime.tv_sec = get_cmos_time();
+ xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ cur_timer = select_timer();
+ printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
+
+ time_init_hook();
+}
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
new file mode 100644
index 0000000..244a31b
--- /dev/null
+++ b/arch/i386/kernel/time_hpet.c
@@ -0,0 +1,458 @@
+/*
+ * linux/arch/i386/kernel/time_hpet.c
+ * This code largely copied from arch/x86_64/kernel/time.c
+ * See that file for credits.
+ *
+ * 2003-06-30 Venkatesh Pallipadi - Additional changes for HPET support
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/timer.h>
+#include <asm/fixmap.h>
+#include <asm/apic.h>
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/hpet.h>
+#include <linux/hpet.h>
+
+static unsigned long hpet_period; /* fsecs / HPET clock */
+unsigned long hpet_tick; /* hpet clks count per tick */
+unsigned long hpet_address; /* hpet memory map physical address */
+
+static int use_hpet; /* can be used for runtime check of hpet */
+static int boot_hpet_disable; /* boottime override for HPET timer */
+static void __iomem * hpet_virt_address; /* hpet kernel virtual address */
+
+#define FSEC_TO_USEC (1000000000UL)
+
+int hpet_readl(unsigned long a)
+{
+ return readl(hpet_virt_address + a);
+}
+
+static void hpet_writel(unsigned long d, unsigned long a)
+{
+ writel(d, hpet_virt_address + a);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * HPET counters dont wrap around on every tick. They just change the
+ * comparator value and continue. Next tick can be caught by checking
+ * for a change in the comparator value. Used in apic.c.
+ */
+static void __init wait_hpet_tick(void)
+{
+ unsigned int start_cmp_val, end_cmp_val;
+
+ start_cmp_val = hpet_readl(HPET_T0_CMP);
+ do {
+ end_cmp_val = hpet_readl(HPET_T0_CMP);
+ } while (start_cmp_val == end_cmp_val);
+}
+#endif
+
+static int hpet_timer_stop_set_go(unsigned long tick)
+{
+ unsigned int cfg;
+
+ /*
+ * Stop the timers and reset the main counter.
+ */
+ cfg = hpet_readl(HPET_CFG);
+ cfg &= ~HPET_CFG_ENABLE;
+ hpet_writel(cfg, HPET_CFG);
+ hpet_writel(0, HPET_COUNTER);
+ hpet_writel(0, HPET_COUNTER + 4);
+
+ /*
+ * Set up timer 0, as periodic with first interrupt to happen at
+ * hpet_tick, and period also hpet_tick.
+ */
+ cfg = hpet_readl(HPET_T0_CFG);
+ cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+ HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_writel(cfg, HPET_T0_CFG);
+
+ /*
+ * The first write after writing TN_SETVAL to the config register sets
+ * the counter value, the second write sets the threshold.
+ */
+ hpet_writel(tick, HPET_T0_CMP);
+ hpet_writel(tick, HPET_T0_CMP);
+
+ /*
+ * Go!
+ */
+ cfg = hpet_readl(HPET_CFG);
+ cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+ hpet_writel(cfg, HPET_CFG);
+
+ return 0;
+}
+
+/*
+ * Check whether HPET was found by ACPI boot parse. If yes setup HPET
+ * counter 0 for kernel base timer.
+ */
+int __init hpet_enable(void)
+{
+ unsigned int id;
+ unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */
+ unsigned long hpet_tick_rem;
+
+ if (boot_hpet_disable)
+ return -1;
+
+ if (!hpet_address) {
+ return -1;
+ }
+ hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
+ /*
+ * Read the period, compute tick and quotient.
+ */
+ id = hpet_readl(HPET_ID);
+
+ /*
+ * We are checking for value '1' or more in number field if
+ * CONFIG_HPET_EMULATE_RTC is set because we will need an
+ * additional timer for RTC emulation.
+ * However, we can do with one timer otherwise using the
+ * the single HPET timer for system time.
+ */
+ if (
+#ifdef CONFIG_HPET_EMULATE_RTC
+ !(id & HPET_ID_NUMBER) ||
+#endif
+ !(id & HPET_ID_LEGSUP))
+ return -1;
+
+ hpet_period = hpet_readl(HPET_PERIOD);
+ if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD))
+ return -1;
+
+ /*
+ * 64 bit math
+ * First changing tick into fsec
+ * Then 64 bit div to find number of hpet clk per tick
+ */
+ ASM_MUL64_REG(tick_fsec_low, tick_fsec_high,
+ KERNEL_TICK_USEC, FSEC_TO_USEC);
+ ASM_DIV64_REG(hpet_tick, hpet_tick_rem,
+ hpet_period, tick_fsec_low, tick_fsec_high);
+
+ if (hpet_tick_rem > (hpet_period >> 1))
+ hpet_tick++; /* rounding the result */
+
+ if (hpet_timer_stop_set_go(hpet_tick))
+ return -1;
+
+ use_hpet = 1;
+
+#ifdef CONFIG_HPET
+ {
+ struct hpet_data hd;
+ unsigned int ntimer;
+
+ memset(&hd, 0, sizeof (hd));
+
+ ntimer = hpet_readl(HPET_ID);
+ ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
+ ntimer++;
+
+ /*
+ * Register with driver.
+ * Timer0 and Timer1 is used by platform.
+ */
+ hd.hd_phys_address = hpet_address;
+ hd.hd_address = hpet_virt_address;
+ hd.hd_nirqs = ntimer;
+ hd.hd_flags = HPET_DATA_PLATFORM;
+ hpet_reserve_timer(&hd, 0);
+#ifdef CONFIG_HPET_EMULATE_RTC
+ hpet_reserve_timer(&hd, 1);
+#endif
+ hd.hd_irq[0] = HPET_LEGACY_8254;
+ hd.hd_irq[1] = HPET_LEGACY_RTC;
+ if (ntimer > 2) {
+ struct hpet __iomem *hpet;
+ struct hpet_timer __iomem *timer;
+ int i;
+
+ hpet = hpet_virt_address;
+
+ for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
+ timer++, i++)
+ hd.hd_irq[i] = (timer->hpet_config &
+ Tn_INT_ROUTE_CNF_MASK) >>
+ Tn_INT_ROUTE_CNF_SHIFT;
+
+ }
+
+ hpet_alloc(&hd);
+ }
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ wait_timer_tick = wait_hpet_tick;
+#endif
+ return 0;
+}
+
+int hpet_reenable(void)
+{
+ return hpet_timer_stop_set_go(hpet_tick);
+}
+
+int is_hpet_enabled(void)
+{
+ return use_hpet;
+}
+
+int is_hpet_capable(void)
+{
+ if (!boot_hpet_disable && hpet_address)
+ return 1;
+ return 0;
+}
+
+static int __init hpet_setup(char* str)
+{
+ if (str) {
+ if (!strncmp("disable", str, 7))
+ boot_hpet_disable = 1;
+ }
+ return 1;
+}
+
+__setup("hpet=", hpet_setup);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
+ * is enabled, we support RTC interrupt functionality in software.
+ * RTC has 3 kinds of interrupts:
+ * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
+ * is updated
+ * 2) Alarm Interrupt - generate an interrupt at a specific time of day
+ * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
+ * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
+ * (1) and (2) above are implemented using polling at a frequency of
+ * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
+ * overhead. (DEFAULT_RTC_INT_FREQ)
+ * For (3), we use interrupts at 64Hz or user specified periodic
+ * frequency, whichever is higher.
+ */
+#include <linux/mc146818rtc.h>
+#include <linux/rtc.h>
+
+extern irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+#define DEFAULT_RTC_INT_FREQ 64
+#define RTC_NUM_INTS 1
+
+static unsigned long UIE_on;
+static unsigned long prev_update_sec;
+
+static unsigned long AIE_on;
+static struct rtc_time alarm_time;
+
+static unsigned long PIE_on;
+static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
+static unsigned long PIE_count;
+
+static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+
+/*
+ * Timer 1 for RTC, we do not use periodic interrupt feature,
+ * even if HPET supports periodic interrupts on Timer 1.
+ * The reason being, to set up a periodic interrupt in HPET, we need to
+ * stop the main counter. And if we do that everytime someone diables/enables
+ * RTC, we will have adverse effect on main kernel timer running on Timer 0.
+ * So, for the time being, simulate the periodic interrupt in software.
+ *
+ * hpet_rtc_timer_init() is called for the first time and during subsequent
+ * interuppts reinit happens through hpet_rtc_timer_reinit().
+ */
+int hpet_rtc_timer_init(void)
+{
+ unsigned int cfg, cnt;
+ unsigned long flags;
+
+ if (!is_hpet_enabled())
+ return 0;
+ /*
+ * Set the counter 1 and enable the interrupts.
+ */
+ if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+ hpet_rtc_int_freq = PIE_freq;
+ else
+ hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+ local_irq_save(flags);
+ cnt = hpet_readl(HPET_COUNTER);
+ cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
+ hpet_writel(cnt, HPET_T1_CMP);
+ local_irq_restore(flags);
+
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_writel(cfg, HPET_T1_CFG);
+
+ return 1;
+}
+
+static void hpet_rtc_timer_reinit(void)
+{
+ unsigned int cfg, cnt;
+
+ if (!(PIE_on | AIE_on | UIE_on))
+ return;
+
+ if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+ hpet_rtc_int_freq = PIE_freq;
+ else
+ hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+ /* It is more accurate to use the comparator value than current count.*/
+ cnt = hpet_readl(HPET_T1_CMP);
+ cnt += hpet_tick*HZ/hpet_rtc_int_freq;
+ hpet_writel(cnt, HPET_T1_CMP);
+
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_writel(cfg, HPET_T1_CFG);
+
+ return;
+}
+
+/*
+ * The functions below are called from rtc driver.
+ * Return 0 if HPET is not being used.
+ * Otherwise do the necessary changes and return 1.
+ */
+int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
+{
+ if (!is_hpet_enabled())
+ return 0;
+
+ if (bit_mask & RTC_UIE)
+ UIE_on = 0;
+ if (bit_mask & RTC_PIE)
+ PIE_on = 0;
+ if (bit_mask & RTC_AIE)
+ AIE_on = 0;
+
+ return 1;
+}
+
+int hpet_set_rtc_irq_bit(unsigned long bit_mask)
+{
+ int timer_init_reqd = 0;
+
+ if (!is_hpet_enabled())
+ return 0;
+
+ if (!(PIE_on | AIE_on | UIE_on))
+ timer_init_reqd = 1;
+
+ if (bit_mask & RTC_UIE) {
+ UIE_on = 1;
+ }
+ if (bit_mask & RTC_PIE) {
+ PIE_on = 1;
+ PIE_count = 0;
+ }
+ if (bit_mask & RTC_AIE) {
+ AIE_on = 1;
+ }
+
+ if (timer_init_reqd)
+ hpet_rtc_timer_init();
+
+ return 1;
+}
+
+int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+ if (!is_hpet_enabled())
+ return 0;
+
+ alarm_time.tm_hour = hrs;
+ alarm_time.tm_min = min;
+ alarm_time.tm_sec = sec;
+
+ return 1;
+}
+
+int hpet_set_periodic_freq(unsigned long freq)
+{
+ if (!is_hpet_enabled())
+ return 0;
+
+ PIE_freq = freq;
+ PIE_count = 0;
+
+ return 1;
+}
+
+int hpet_rtc_dropped_irq(void)
+{
+ if (!is_hpet_enabled())
+ return 0;
+
+ return 1;
+}
+
+irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct rtc_time curr_time;
+ unsigned long rtc_int_flag = 0;
+ int call_rtc_interrupt = 0;
+
+ hpet_rtc_timer_reinit();
+
+ if (UIE_on | AIE_on) {
+ rtc_get_rtc_time(&curr_time);
+ }
+ if (UIE_on) {
+ if (curr_time.tm_sec != prev_update_sec) {
+ /* Set update int info, call real rtc int routine */
+ call_rtc_interrupt = 1;
+ rtc_int_flag = RTC_UF;
+ prev_update_sec = curr_time.tm_sec;
+ }
+ }
+ if (PIE_on) {
+ PIE_count++;
+ if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
+ /* Set periodic int info, call real rtc int routine */
+ call_rtc_interrupt = 1;
+ rtc_int_flag |= RTC_PF;
+ PIE_count = 0;
+ }
+ }
+ if (AIE_on) {
+ if ((curr_time.tm_sec == alarm_time.tm_sec) &&
+ (curr_time.tm_min == alarm_time.tm_min) &&
+ (curr_time.tm_hour == alarm_time.tm_hour)) {
+ /* Set alarm int info, call real rtc int routine */
+ call_rtc_interrupt = 1;
+ rtc_int_flag |= RTC_AF;
+ }
+ }
+ if (call_rtc_interrupt) {
+ rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
+ rtc_interrupt(rtc_int_flag, dev_id, regs);
+ }
+ return IRQ_HANDLED;
+}
+#endif
+
diff --git a/arch/i386/kernel/timers/Makefile b/arch/i386/kernel/timers/Makefile
new file mode 100644
index 0000000..8fa12be
--- /dev/null
+++ b/arch/i386/kernel/timers/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for x86 timers
+#
+
+obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o
+
+obj-$(CONFIG_X86_CYCLONE_TIMER) += timer_cyclone.o
+obj-$(CONFIG_HPET_TIMER) += timer_hpet.o
+obj-$(CONFIG_X86_PM_TIMER) += timer_pm.o
diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c
new file mode 100644
index 0000000..f7f9000
--- /dev/null
+++ b/arch/i386/kernel/timers/common.c
@@ -0,0 +1,160 @@
+/*
+ * Common functions used across the timers go here
+ */
+
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/hpet.h>
+
+#include "mach_timer.h"
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+unsigned long __init calibrate_tsc(void)
+{
+ mach_prepare_counter();
+
+ {
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned long count;
+
+ rdtsc(startlow,starthigh);
+ mach_countup(&count);
+ rdtsc(endlow,endhigh);
+
+
+ /* Error: ECTCNEVERSET */
+ if (count <= 1)
+ goto bad_ctc;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+ }
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#ifdef CONFIG_HPET_TIMER
+/* ------ Calibrate the TSC using HPET -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq.
+ * Second output is parameter 1 (when non NULL)
+ * Set 2^32 * (1 / (tsc per HPET clk)) for delay_hpet().
+ * calibrate_tsc() calibrates the processor TSC by comparing
+ * it to the HPET timer of known frequency.
+ * Too much 64-bit arithmetic here to do this cleanly in C
+ */
+#define CALIBRATE_CNT_HPET (5 * hpet_tick)
+#define CALIBRATE_TIME_HPET (5 * KERNEL_TICK_USEC)
+
+unsigned long __init calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr)
+{
+ unsigned long tsc_startlow, tsc_starthigh;
+ unsigned long tsc_endlow, tsc_endhigh;
+ unsigned long hpet_start, hpet_end;
+ unsigned long result, remain;
+
+ hpet_start = hpet_readl(HPET_COUNTER);
+ rdtsc(tsc_startlow, tsc_starthigh);
+ do {
+ hpet_end = hpet_readl(HPET_COUNTER);
+ } while ((hpet_end - hpet_start) < CALIBRATE_CNT_HPET);
+ rdtsc(tsc_endlow, tsc_endhigh);
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (tsc_endlow), "=d" (tsc_endhigh)
+ :"g" (tsc_startlow), "g" (tsc_starthigh),
+ "0" (tsc_endlow), "1" (tsc_endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (tsc_endhigh)
+ goto bad_calibration;
+
+ /* Error: ECPUTOOSLOW */
+ if (tsc_endlow <= CALIBRATE_TIME_HPET)
+ goto bad_calibration;
+
+ ASM_DIV64_REG(result, remain, tsc_endlow, 0, CALIBRATE_TIME_HPET);
+ if (remain > (tsc_endlow >> 1))
+ result++; /* rounding the result */
+
+ if (tsc_hpet_quotient_ptr) {
+ unsigned long tsc_hpet_quotient;
+
+ ASM_DIV64_REG(tsc_hpet_quotient, remain, tsc_endlow, 0,
+ CALIBRATE_CNT_HPET);
+ if (remain > (tsc_endlow >> 1))
+ tsc_hpet_quotient++; /* rounding the result */
+ *tsc_hpet_quotient_ptr = tsc_hpet_quotient;
+ }
+
+ return result;
+bad_calibration:
+ /*
+ * the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+ return 0;
+}
+#endif
+
+/* calculate cpu_khz */
+void __init init_cpu_khz(void)
+{
+ if (cpu_has_tsc) {
+ unsigned long tsc_quotient = calibrate_tsc();
+ if (tsc_quotient) {
+ /* report CPU clock rate in Hz.
+ * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+ * clock/second. Our precision is about 100 ppm.
+ */
+ { unsigned long eax=0, edx=1000;
+ __asm__("divl %2"
+ :"=a" (cpu_khz), "=d" (edx)
+ :"r" (tsc_quotient),
+ "0" (eax), "1" (edx));
+ printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+ }
+ }
+ }
+}
diff --git a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c
new file mode 100644
index 0000000..a3d6a28
--- /dev/null
+++ b/arch/i386/kernel/timers/timer.c
@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/timer.h>
+
+#ifdef CONFIG_HPET_TIMER
+/*
+ * HPET memory read is slower than tsc reads, but is more dependable as it
+ * always runs at constant frequency and reduces complexity due to
+ * cpufreq. So, we prefer HPET timer to tsc based one. Also, we cannot use
+ * timer_pit when HPET is active. So, we default to timer_tsc.
+ */
+#endif
+/* list of timers, ordered by preference, NULL terminated */
+static struct init_timer_opts* __initdata timers[] = {
+#ifdef CONFIG_X86_CYCLONE_TIMER
+ &timer_cyclone_init,
+#endif
+#ifdef CONFIG_HPET_TIMER
+ &timer_hpet_init,
+#endif
+#ifdef CONFIG_X86_PM_TIMER
+ &timer_pmtmr_init,
+#endif
+ &timer_tsc_init,
+ &timer_pit_init,
+ NULL,
+};
+
+static char clock_override[10] __initdata;
+
+static int __init clock_setup(char* str)
+{
+ if (str)
+ strlcpy(clock_override, str, sizeof(clock_override));
+ return 1;
+}
+__setup("clock=", clock_setup);
+
+
+/* The chosen timesource has been found to be bad.
+ * Fall back to a known good timesource (the PIT)
+ */
+void clock_fallback(void)
+{
+ cur_timer = &timer_pit;
+}
+
+/* iterates through the list of timers, returning the first
+ * one that initializes successfully.
+ */
+struct timer_opts* __init select_timer(void)
+{
+ int i = 0;
+
+ /* find most preferred working timer */
+ while (timers[i]) {
+ if (timers[i]->init)
+ if (timers[i]->init(clock_override) == 0)
+ return timers[i]->opts;
+ ++i;
+ }
+
+ panic("select_timer: Cannot find a suitable timer\n");
+ return NULL;
+}
diff --git a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c
new file mode 100644
index 0000000..f6f1206
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_cyclone.c
@@ -0,0 +1,259 @@
+/* Cyclone-timer:
+ * This code implements timer_ops for the cyclone counter found
+ * on IBM x440, x360, and other Summit based systems.
+ *
+ * Copyright (C) 2002 IBM, John Stultz (johnstul@us.ibm.com)
+ */
+
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include "io_ports.h"
+
+extern spinlock_t i8253_lock;
+
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+#define CYCLONE_CBAR_ADDR 0xFEB00CD0
+#define CYCLONE_PMCC_OFFSET 0x51A0
+#define CYCLONE_MPMC_OFFSET 0x51D0
+#define CYCLONE_MPCS_OFFSET 0x51A8
+#define CYCLONE_TIMER_FREQ 100000000
+#define CYCLONE_TIMER_MASK (((u64)1<<40)-1) /* 40 bit mask */
+int use_cyclone = 0;
+
+static u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
+static u32 last_cyclone_low;
+static u32 last_cyclone_high;
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* helper macro to atomically read both cyclone counter registers */
+#define read_cyclone_counter(low,high) \
+ do{ \
+ high = cyclone_timer[1]; low = cyclone_timer[0]; \
+ } while (high != cyclone_timer[1]);
+
+
+static void mark_offset_cyclone(void)
+{
+ unsigned long lost, delay;
+ unsigned long delta = last_cyclone_low;
+ int count;
+ unsigned long long this_offset, last_offset;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+
+ spin_lock(&i8253_lock);
+ read_cyclone_counter(last_cyclone_low,last_cyclone_high);
+
+ /* read values for delay_at_last_interrupt */
+ outb_p(0x00, 0x43); /* latch the count ASAP */
+
+ count = inb_p(0x40); /* read the latched count */
+ count |= inb(0x40) << 8;
+
+ /*
+ * VIA686a test code... reset the latch if count > max + 1
+ * from timer_pit.c - cjb
+ */
+ if (count > LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
+ count = LATCH - 1;
+ }
+ spin_unlock(&i8253_lock);
+
+ /* lost tick compensation */
+ delta = last_cyclone_low - delta;
+ delta /= (CYCLONE_TIMER_FREQ/1000000);
+ delta += delay_at_last_interrupt;
+ lost = delta/(1000000/HZ);
+ delay = delta%(1000000/HZ);
+ if (lost >= 2)
+ jiffies_64 += lost-1;
+
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+ monotonic_base += (this_offset - last_offset) & CYCLONE_TIMER_MASK;
+ write_sequnlock(&monotonic_lock);
+
+ /* calculate delay_at_last_interrupt */
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+
+ /* catch corner case where tick rollover occured
+ * between cyclone and pit reads (as noted when
+ * usec delta is > 90% # of usecs/tick)
+ */
+ if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+ jiffies_64++;
+}
+
+static unsigned long get_offset_cyclone(void)
+{
+ u32 offset;
+
+ if(!cyclone_timer)
+ return delay_at_last_interrupt;
+
+ /* Read the cyclone timer */
+ offset = cyclone_timer[0];
+
+ /* .. relative to previous jiffy */
+ offset = offset - last_cyclone_low;
+
+ /* convert cyclone ticks to microseconds */
+ /* XXX slow, can we speed this up? */
+ offset = offset/(CYCLONE_TIMER_FREQ/1000000);
+
+ /* our adjusted time offset in microseconds */
+ return delay_at_last_interrupt + offset;
+}
+
+static unsigned long long monotonic_clock_cyclone(void)
+{
+ u32 now_low, now_high;
+ unsigned long long last_offset, this_offset, base;
+ unsigned long long ret;
+ unsigned seq;
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+
+ /* Read the cyclone counter */
+ read_cyclone_counter(now_low,now_high);
+ this_offset = ((unsigned long long)now_high<<32)|now_low;
+
+ /* convert to nanoseconds */
+ ret = base + ((this_offset - last_offset)&CYCLONE_TIMER_MASK);
+ return ret * (1000000000 / CYCLONE_TIMER_FREQ);
+}
+
+static int __init init_cyclone(char* override)
+{
+ u32* reg;
+ u32 base; /* saved cyclone base address */
+ u32 pageaddr; /* page that contains cyclone_timer register */
+ u32 offset; /* offset from pageaddr to cyclone_timer register */
+ int i;
+
+ /* check clock override */
+ if (override[0] && strncmp(override,"cyclone",7))
+ return -ENODEV;
+
+ /*make sure we're on a summit box*/
+ if(!use_cyclone) return -ENODEV;
+
+ printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
+
+ /* find base address */
+ pageaddr = (CYCLONE_CBAR_ADDR)&PAGE_MASK;
+ offset = (CYCLONE_CBAR_ADDR)&(~PAGE_MASK);
+ set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+ reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+ if(!reg){
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
+ return -ENODEV;
+ }
+ base = *reg;
+ if(!base){
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
+ return -ENODEV;
+ }
+
+ /* setup PMCC */
+ pageaddr = (base + CYCLONE_PMCC_OFFSET)&PAGE_MASK;
+ offset = (base + CYCLONE_PMCC_OFFSET)&(~PAGE_MASK);
+ set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+ reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+ if(!reg){
+ printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
+ return -ENODEV;
+ }
+ reg[0] = 0x00000001;
+
+ /* setup MPCS */
+ pageaddr = (base + CYCLONE_MPCS_OFFSET)&PAGE_MASK;
+ offset = (base + CYCLONE_MPCS_OFFSET)&(~PAGE_MASK);
+ set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+ reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+ if(!reg){
+ printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
+ return -ENODEV;
+ }
+ reg[0] = 0x00000001;
+
+ /* map in cyclone_timer */
+ pageaddr = (base + CYCLONE_MPMC_OFFSET)&PAGE_MASK;
+ offset = (base + CYCLONE_MPMC_OFFSET)&(~PAGE_MASK);
+ set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+ cyclone_timer = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+ if(!cyclone_timer){
+ printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
+ return -ENODEV;
+ }
+
+ /*quick test to make sure its ticking*/
+ for(i=0; i<3; i++){
+ u32 old = cyclone_timer[0];
+ int stall = 100;
+ while(stall--) barrier();
+ if(cyclone_timer[0] == old){
+ printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
+ cyclone_timer = 0;
+ return -ENODEV;
+ }
+ }
+
+ init_cpu_khz();
+
+ /* Everything looks good! */
+ return 0;
+}
+
+
+static void delay_cyclone(unsigned long loops)
+{
+ unsigned long bclock, now;
+ if(!cyclone_timer)
+ return;
+ bclock = cyclone_timer[0];
+ do {
+ rep_nop();
+ now = cyclone_timer[0];
+ } while ((now-bclock) < loops);
+}
+/************************************************************/
+
+/* cyclone timer_opts struct */
+static struct timer_opts timer_cyclone = {
+ .name = "cyclone",
+ .mark_offset = mark_offset_cyclone,
+ .get_offset = get_offset_cyclone,
+ .monotonic_clock = monotonic_clock_cyclone,
+ .delay = delay_cyclone,
+};
+
+struct init_timer_opts __initdata timer_cyclone_init = {
+ .init = init_cyclone,
+ .opts = &timer_cyclone,
+};
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
new file mode 100644
index 0000000..713134e
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -0,0 +1,191 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+#include <asm/hpet.h>
+
+static unsigned long hpet_usec_quotient; /* convert hpet clks to usec */
+static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */
+static unsigned long hpet_last; /* hpet counter value at last tick*/
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ * basic equation:
+ * ns = cycles / (freq / ns_per_sec)
+ * ns = cycles * (ns_per_sec / freq)
+ * ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ * ns = cycles * (10^3 / cpu_mhz)
+ *
+ * Then we use scaling math (suggested by george@mvista.com) to get:
+ * ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * And since SC is a constant power of two, we can convert the div
+ * into a shift.
+ * -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+ cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+ return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static unsigned long long monotonic_clock_hpet(void)
+{
+ unsigned long long last_offset, this_offset, base;
+ unsigned seq;
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+ /* Read the Time Stamp Counter */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return base + cycles_2_ns(this_offset - last_offset);
+}
+
+static unsigned long get_offset_hpet(void)
+{
+ register unsigned long eax, edx;
+
+ eax = hpet_readl(HPET_COUNTER);
+ eax -= hpet_last; /* hpet delta */
+
+ /*
+ * Time offset = (hpet delta) * ( usecs per HPET clock )
+ * = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+ * = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+ *
+ * Where,
+ * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+ *
+ * Using a mull instead of a divl saves some cycles in critical path.
+ */
+ ASM_MUL64_REG(eax, edx, hpet_usec_quotient, eax);
+
+ /* our adjusted time offset in microseconds */
+ return edx;
+}
+
+static void mark_offset_hpet(void)
+{
+ unsigned long long this_offset, last_offset;
+ unsigned long offset;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ rdtsc(last_tsc_low, last_tsc_high);
+
+ offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+ int lost_ticks = (offset - hpet_last) / hpet_tick;
+ jiffies_64 += lost_ticks;
+ }
+ hpet_last = offset;
+
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ monotonic_base += cycles_2_ns(this_offset - last_offset);
+ write_sequnlock(&monotonic_lock);
+}
+
+static void delay_hpet(unsigned long loops)
+{
+ unsigned long hpet_start, hpet_end;
+ unsigned long eax;
+
+ /* loops is the number of cpu cycles. Convert it to hpet clocks */
+ ASM_MUL64_REG(eax, loops, tsc_hpet_quotient, loops);
+
+ hpet_start = hpet_readl(HPET_COUNTER);
+ do {
+ rep_nop();
+ hpet_end = hpet_readl(HPET_COUNTER);
+ } while ((hpet_end - hpet_start) < (loops));
+}
+
+static int __init init_hpet(char* override)
+{
+ unsigned long result, remain;
+
+ /* check clock override */
+ if (override[0] && strncmp(override,"hpet",4))
+ return -ENODEV;
+
+ if (!is_hpet_enabled())
+ return -ENODEV;
+
+ printk("Using HPET for gettimeofday\n");
+ if (cpu_has_tsc) {
+ unsigned long tsc_quotient = calibrate_tsc_hpet(&tsc_hpet_quotient);
+ if (tsc_quotient) {
+ /* report CPU clock rate in Hz.
+ * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+ * clock/second. Our precision is about 100 ppm.
+ */
+ { unsigned long eax=0, edx=1000;
+ ASM_DIV64_REG(cpu_khz, edx, tsc_quotient,
+ eax, edx);
+ printk("Detected %lu.%03lu MHz processor.\n",
+ cpu_khz / 1000, cpu_khz % 1000);
+ }
+ set_cyc2ns_scale(cpu_khz/1000);
+ }
+ }
+
+ /*
+ * Math to calculate hpet to usec multiplier
+ * Look for the comments at get_offset_hpet()
+ */
+ ASM_DIV64_REG(result, remain, hpet_tick, 0, KERNEL_TICK_USEC);
+ if (remain > (hpet_tick >> 1))
+ result++; /* rounding the result */
+ hpet_usec_quotient = result;
+
+ return 0;
+}
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_hpet = {
+ .name = "hpet",
+ .mark_offset = mark_offset_hpet,
+ .get_offset = get_offset_hpet,
+ .monotonic_clock = monotonic_clock_hpet,
+ .delay = delay_hpet,
+};
+
+struct init_timer_opts __initdata timer_hpet_init = {
+ .init = init_hpet,
+ .opts = &timer_hpet,
+};
diff --git a/arch/i386/kernel/timers/timer_none.c b/arch/i386/kernel/timers/timer_none.c
new file mode 100644
index 0000000..4ea2f41
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_none.c
@@ -0,0 +1,39 @@
+#include <linux/init.h>
+#include <asm/timer.h>
+
+static void mark_offset_none(void)
+{
+ /* nothing needed */
+}
+
+static unsigned long get_offset_none(void)
+{
+ return 0;
+}
+
+static unsigned long long monotonic_clock_none(void)
+{
+ return 0;
+}
+
+static void delay_none(unsigned long loops)
+{
+ int d0;
+ __asm__ __volatile__(
+ "\tjmp 1f\n"
+ ".align 16\n"
+ "1:\tjmp 2f\n"
+ ".align 16\n"
+ "2:\tdecl %0\n\tjns 2b"
+ :"=&a" (d0)
+ :"0" (loops));
+}
+
+/* none timer_opts struct */
+struct timer_opts timer_none = {
+ .name = "none",
+ .mark_offset = mark_offset_none,
+ .get_offset = get_offset_none,
+ .monotonic_clock = monotonic_clock_none,
+ .delay = delay_none,
+};
diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c
new file mode 100644
index 0000000..967d545
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_pit.c
@@ -0,0 +1,206 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <linux/timex.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/timer.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+
+extern spinlock_t i8259A_lock;
+extern spinlock_t i8253_lock;
+#include "do_timer.h"
+#include "io_ports.h"
+
+static int count_p; /* counter in get_offset_pit() */
+
+static int __init init_pit(char* override)
+{
+ /* check clock override */
+ if (override[0] && strncmp(override,"pit",3))
+ printk(KERN_ERR "Warning: clock= override failed. Defaulting to PIT\n");
+
+ count_p = LATCH;
+ return 0;
+}
+
+static void mark_offset_pit(void)
+{
+ /* nothing needed */
+}
+
+static unsigned long long monotonic_clock_pit(void)
+{
+ return 0;
+}
+
+static void delay_pit(unsigned long loops)
+{
+ int d0;
+ __asm__ __volatile__(
+ "\tjmp 1f\n"
+ ".align 16\n"
+ "1:\tjmp 2f\n"
+ ".align 16\n"
+ "2:\tdecl %0\n\tjns 2b"
+ :"=&a" (d0)
+ :"0" (loops));
+}
+
+
+/* This function must be called with xtime_lock held.
+ * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs
+ *
+ * However, the pc-audio speaker driver changes the divisor so that
+ * it gets interrupted rather more often - it loads 64 into the
+ * counter rather than 11932! This has an adverse impact on
+ * do_gettimeoffset() -- it stops working! What is also not
+ * good is that the interval that our timer function gets called
+ * is no longer 10.0002 ms, but 9.9767 ms. To get around this
+ * would require using a different timing source. Maybe someone
+ * could use the RTC - I know that this can interrupt at frequencies
+ * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix
+ * it so that at startup, the timer code in sched.c would select
+ * using either the RTC or the 8253 timer. The decision would be
+ * based on whether there was any other device around that needed
+ * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz,
+ * and then do some jiggery to have a version of do_timer that
+ * advanced the clock by 1/1024 s. Every time that reached over 1/100
+ * of a second, then do all the old code. If the time was kept correct
+ * then do_gettimeoffset could just return 0 - there is no low order
+ * divider that can be accessed.
+ *
+ * Ideally, you would be able to use the RTC for the speaker driver,
+ * but it appears that the speaker driver really needs interrupt more
+ * often than every 120 us or so.
+ *
+ * Anyway, this needs more thought.... pjsg (1993-08-28)
+ *
+ * If you are really that interested, you should be reading
+ * comp.protocols.time.ntp!
+ */
+
+static unsigned long get_offset_pit(void)
+{
+ int count;
+ unsigned long flags;
+ static unsigned long jiffies_p = 0;
+
+ /*
+ * cache volatile jiffies temporarily; we have xtime_lock.
+ */
+ unsigned long jiffies_t;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ /* timer count may underflow right here */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+
+ count = inb_p(PIT_CH0); /* read the latched count */
+
+ /*
+ * We do this guaranteed double memory access instead of a _p
+ * postfix in the previous port access. Wheee, hackady hack
+ */
+ jiffies_t = jiffies;
+
+ count |= inb_p(PIT_CH0) << 8;
+
+ /* VIA686a test code... reset the latch if count > max + 1 */
+ if (count > LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
+ count = LATCH - 1;
+ }
+
+ /*
+ * avoiding timer inconsistencies (they are rare, but they happen)...
+ * there are two kinds of problems that must be avoided here:
+ * 1. the timer counter underflows
+ * 2. hardware problem with the timer, not giving us continuous time,
+ * the counter does small "jumps" upwards on some Pentium systems,
+ * (see c't 95/10 page 335 for Neptun bug.)
+ */
+
+ if( jiffies_t == jiffies_p ) {
+ if( count > count_p ) {
+ /* the nutcase */
+ count = do_timer_overflow(count);
+ }
+ } else
+ jiffies_p = jiffies_t;
+
+ count_p = count;
+
+ spin_unlock_irqrestore(&i8253_lock, flags);
+
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ count = (count + LATCH/2) / LATCH;
+
+ return count;
+}
+
+
+/* tsc timer_opts struct */
+struct timer_opts timer_pit = {
+ .name = "pit",
+ .mark_offset = mark_offset_pit,
+ .get_offset = get_offset_pit,
+ .monotonic_clock = monotonic_clock_pit,
+ .delay = delay_pit,
+};
+
+struct init_timer_opts __initdata timer_pit_init = {
+ .init = init_pit,
+ .opts = &timer_pit,
+};
+
+void setup_pit_timer(void)
+{
+ extern spinlock_t i8253_lock;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
+ udelay(10);
+ outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
+ udelay(10);
+ outb(LATCH >> 8 , PIT_CH0); /* MSB */
+ spin_unlock_irqrestore(&i8253_lock, flags);
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+ setup_pit_timer();
+ return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+ set_kset_name("timer_pit"),
+ .resume = timer_resume,
+};
+
+static struct sys_device device_timer = {
+ .id = 0,
+ .cls = &timer_sysclass,
+};
+
+static int __init init_timer_sysfs(void)
+{
+ int error = sysdev_class_register(&timer_sysclass);
+ if (!error)
+ error = sysdev_register(&device_timer);
+ return error;
+}
+
+device_initcall(init_timer_sysfs);
+
diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c
new file mode 100644
index 0000000..d77f220
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_pm.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Dominik Brodowski <linux@brodo.de> 2003
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <asm/types.h>
+#include <asm/timer.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+
+#include <linux/timex.h>
+#include "mach_timer.h"
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+#define PMTMR_EXPECTED_RATE \
+ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+
+
+/* The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c */
+u32 pmtmr_ioport = 0;
+
+
+/* value of the Power timer at last timer interrupt */
+static u32 offset_tick;
+static u32 offset_delay;
+
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+/*helper function to safely read acpi pm timesource*/
+static inline u32 read_pmtmr(void)
+{
+ u32 v1=0,v2=0,v3=0;
+ /* It has been reported that because of various broken
+ * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time
+ * source is not latched, so you must read it multiple
+ * times to insure a safe value is read.
+ */
+ do {
+ v1 = inl(pmtmr_ioport);
+ v2 = inl(pmtmr_ioport);
+ v3 = inl(pmtmr_ioport);
+ } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+ || (v3 > v1 && v3 < v2));
+
+ /* mask the output to 24 bits */
+ return v2 & ACPI_PM_MASK;
+}
+
+
+/*
+ * Some boards have the PMTMR running way too fast. We check
+ * the PMTMR rate against PIT channel 2 to catch these cases.
+ */
+static int verify_pmtmr_rate(void)
+{
+ u32 value1, value2;
+ unsigned long count, delta;
+
+ mach_prepare_counter();
+ value1 = read_pmtmr();
+ mach_countup(&count);
+ value2 = read_pmtmr();
+ delta = (value2 - value1) & ACPI_PM_MASK;
+
+ /* Check that the PMTMR delta is within 5% of what we expect */
+ if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
+ delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
+ printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% of normal - aborting.\n", 100UL * delta / PMTMR_EXPECTED_RATE);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static int init_pmtmr(char* override)
+{
+ u32 value1, value2;
+ unsigned int i;
+
+ if (override[0] && strncmp(override,"pmtmr",5))
+ return -ENODEV;
+
+ if (!pmtmr_ioport)
+ return -ENODEV;
+
+ /* we use the TSC for delay_pmtmr, so make sure it exists */
+ if (!cpu_has_tsc)
+ return -ENODEV;
+
+ /* "verify" this timing source */
+ value1 = read_pmtmr();
+ for (i = 0; i < 10000; i++) {
+ value2 = read_pmtmr();
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ goto pm_good;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ goto pm_good;
+ printk(KERN_INFO "PM-Timer had inconsistent results: 0x%#x, 0x%#x - aborting.\n", value1, value2);
+ return -EINVAL;
+ }
+ printk(KERN_INFO "PM-Timer had no reasonable result: 0x%#x - aborting.\n", value1);
+ return -ENODEV;
+
+pm_good:
+ if (verify_pmtmr_rate() != 0)
+ return -ENODEV;
+
+ init_cpu_khz();
+ return 0;
+}
+
+static inline u32 cyc2us(u32 cycles)
+{
+ /* The Power Management Timer ticks at 3.579545 ticks per microsecond.
+ * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
+ *
+ * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
+ * easily be multiplied with 286 (=0x11E) without having to fear
+ * u32 overflows.
+ */
+ cycles *= 286;
+ return (cycles >> 10);
+}
+
+/*
+ * this gets called during each timer interrupt
+ * - Called while holding the writer xtime_lock
+ */
+static void mark_offset_pmtmr(void)
+{
+ u32 lost, delta, last_offset;
+ static int first_run = 1;
+ last_offset = offset_tick;
+
+ write_seqlock(&monotonic_lock);
+
+ offset_tick = read_pmtmr();
+
+ /* calculate tick interval */
+ delta = (offset_tick - last_offset) & ACPI_PM_MASK;
+
+ /* convert to usecs */
+ delta = cyc2us(delta);
+
+ /* update the monotonic base value */
+ monotonic_base += delta * NSEC_PER_USEC;
+ write_sequnlock(&monotonic_lock);
+
+ /* convert to ticks */
+ delta += offset_delay;
+ lost = delta / (USEC_PER_SEC / HZ);
+ offset_delay = delta % (USEC_PER_SEC / HZ);
+
+
+ /* compensate for lost ticks */
+ if (lost >= 2)
+ jiffies_64 += lost - 1;
+
+ /* don't calculate delay for first run,
+ or if we've got less then a tick */
+ if (first_run || (lost < 1)) {
+ first_run = 0;
+ offset_delay = 0;
+ }
+}
+
+
+static unsigned long long monotonic_clock_pmtmr(void)
+{
+ u32 last_offset, this_offset;
+ unsigned long long base, ret;
+ unsigned seq;
+
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = offset_tick;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+ /* Read the pmtmr */
+ this_offset = read_pmtmr();
+
+ /* convert to nanoseconds */
+ ret = (this_offset - last_offset) & ACPI_PM_MASK;
+ ret = base + (cyc2us(ret) * NSEC_PER_USEC);
+ return ret;
+}
+
+static void delay_pmtmr(unsigned long loops)
+{
+ unsigned long bclock, now;
+
+ rdtscl(bclock);
+ do
+ {
+ rep_nop();
+ rdtscl(now);
+ } while ((now-bclock) < loops);
+}
+
+
+/*
+ * get the offset (in microseconds) from the last call to mark_offset()
+ * - Called holding a reader xtime_lock
+ */
+static unsigned long get_offset_pmtmr(void)
+{
+ u32 now, offset, delta = 0;
+
+ offset = offset_tick;
+ now = read_pmtmr();
+ delta = (now - offset)&ACPI_PM_MASK;
+
+ return (unsigned long) offset_delay + cyc2us(delta);
+}
+
+
+/* acpi timer_opts struct */
+static struct timer_opts timer_pmtmr = {
+ .name = "pmtmr",
+ .mark_offset = mark_offset_pmtmr,
+ .get_offset = get_offset_pmtmr,
+ .monotonic_clock = monotonic_clock_pmtmr,
+ .delay = delay_pmtmr,
+};
+
+struct init_timer_opts __initdata timer_pmtmr_init = {
+ .init = init_pmtmr,
+ .opts = &timer_pmtmr,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86");
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
new file mode 100644
index 0000000..a685994
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -0,0 +1,560 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ *
+ * 2004-06-25 Jesper Juhl
+ * moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4
+ * failing to inline.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+/* processor.h for distable_tsc flag */
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+
+#include <asm/hpet.h>
+
+#ifdef CONFIG_HPET_TIMER
+static unsigned long hpet_usec_quotient;
+static unsigned long hpet_last;
+static struct timer_opts timer_tsc;
+#endif
+
+static inline void cpufreq_delayed_get(void);
+
+int tsc_disable __initdata = 0;
+
+extern spinlock_t i8253_lock;
+
+static int use_tsc;
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ * basic equation:
+ * ns = cycles / (freq / ns_per_sec)
+ * ns = cycles * (ns_per_sec / freq)
+ * ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ * ns = cycles * (10^3 / cpu_mhz)
+ *
+ * Then we use scaling math (suggested by george@mvista.com) to get:
+ * ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * And since SC is a constant power of two, we can convert the div
+ * into a shift.
+ * -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+ cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+ return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static int count2; /* counter for mark_offset_tsc() */
+
+/* Cached *multiplier* to convert TSC counts to microseconds.
+ * (see the equation below).
+ * Equal to 2^32 * (1 / (clocks per usec) ).
+ * Initialized in time_init.
+ */
+static unsigned long fast_gettimeoffset_quotient;
+
+static unsigned long get_offset_tsc(void)
+{
+ register unsigned long eax, edx;
+
+ /* Read the Time Stamp Counter */
+
+ rdtsc(eax,edx);
+
+ /* .. relative to previous jiffy (32 bits is enough) */
+ eax -= last_tsc_low; /* tsc_low delta */
+
+ /*
+ * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
+ * = (tsc_low delta) * (usecs_per_clock)
+ * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
+ *
+ * Using a mull instead of a divl saves up to 31 clock cycles
+ * in the critical path.
+ */
+
+ __asm__("mull %2"
+ :"=a" (eax), "=d" (edx)
+ :"rm" (fast_gettimeoffset_quotient),
+ "0" (eax));
+
+ /* our adjusted time offset in microseconds */
+ return delay_at_last_interrupt + edx;
+}
+
+static unsigned long long monotonic_clock_tsc(void)
+{
+ unsigned long long last_offset, this_offset, base;
+ unsigned seq;
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+ /* Read the Time Stamp Counter */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return base + cycles_2_ns(this_offset - last_offset);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long long this_offset;
+
+ /*
+ * In the NUMA case we dont use the TSC as they are not
+ * synchronized across all CPUs.
+ */
+#ifndef CONFIG_NUMA
+ if (!use_tsc)
+#endif
+ /* no locking but a rare wrong value is not a big deal */
+ return jiffies_64 * (1000000000 / HZ);
+
+ /* Read the Time Stamp Counter */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return cycles_2_ns(this_offset);
+}
+
+static void delay_tsc(unsigned long loops)
+{
+ unsigned long bclock, now;
+
+ rdtscl(bclock);
+ do
+ {
+ rep_nop();
+ rdtscl(now);
+ } while ((now-bclock) < loops);
+}
+
+#ifdef CONFIG_HPET_TIMER
+static void mark_offset_tsc_hpet(void)
+{
+ unsigned long long this_offset, last_offset;
+ unsigned long offset, temp, hpet_current;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ /*
+ * It is important that these two operations happen almost at
+ * the same time. We do the RDTSC stuff first, since it's
+ * faster. To avoid any inconsistencies, we need interrupts
+ * disabled locally.
+ */
+ /*
+ * Interrupts are just disabled locally since the timer irq
+ * has the SA_INTERRUPT flag set. -arca
+ */
+ /* read Pentium cycle counter */
+
+ hpet_current = hpet_readl(HPET_COUNTER);
+ rdtsc(last_tsc_low, last_tsc_high);
+
+ /* lost tick compensation */
+ offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+ int lost_ticks = (offset - hpet_last) / hpet_tick;
+ jiffies_64 += lost_ticks;
+ }
+ hpet_last = hpet_current;
+
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ monotonic_base += cycles_2_ns(this_offset - last_offset);
+ write_sequnlock(&monotonic_lock);
+
+ /* calculate delay_at_last_interrupt */
+ /*
+ * Time offset = (hpet delta) * ( usecs per HPET clock )
+ * = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+ * = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+ * Where,
+ * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+ */
+ delay_at_last_interrupt = hpet_current - offset;
+ ASM_MUL64_REG(temp, delay_at_last_interrupt,
+ hpet_usec_quotient, delay_at_last_interrupt);
+}
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/workqueue.h>
+
+static unsigned int cpufreq_delayed_issched = 0;
+static unsigned int cpufreq_init = 0;
+static struct work_struct cpufreq_delayed_get_work;
+
+static void handle_cpufreq_delayed_get(void *v)
+{
+ unsigned int cpu;
+ for_each_online_cpu(cpu) {
+ cpufreq_get(cpu);
+ }
+ cpufreq_delayed_issched = 0;
+}
+
+/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
+ * to verify the CPU frequency the timing core thinks the CPU is running
+ * at is still correct.
+ */
+static inline void cpufreq_delayed_get(void)
+{
+ if (cpufreq_init && !cpufreq_delayed_issched) {
+ cpufreq_delayed_issched = 1;
+ printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+ schedule_work(&cpufreq_delayed_get_work);
+ }
+}
+
+/* If the CPU frequency is scaled, TSC-based delays will need a different
+ * loops_per_jiffy value to function properly.
+ */
+
+static unsigned int ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+
+#ifndef CONFIG_SMP
+static unsigned long fast_gettimeoffset_ref = 0;
+static unsigned long cpu_khz_ref = 0;
+#endif
+
+static int
+time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ if (val != CPUFREQ_RESUMECHANGE)
+ write_seqlock_irq(&xtime_lock);
+ if (!ref_freq) {
+ ref_freq = freq->old;
+ loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
+#ifndef CONFIG_SMP
+ fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
+ cpu_khz_ref = cpu_khz;
+#endif
+ }
+
+ if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
+ (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+ (val == CPUFREQ_RESUMECHANGE)) {
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+ cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+#ifndef CONFIG_SMP
+ if (cpu_khz)
+ cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+ if (use_tsc) {
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
+ fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
+ set_cyc2ns_scale(cpu_khz/1000);
+ }
+ }
+#endif
+ }
+
+ if (val != CPUFREQ_RESUMECHANGE)
+ write_sequnlock_irq(&xtime_lock);
+
+ return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+ .notifier_call = time_cpufreq_notifier
+};
+
+
+static int __init cpufreq_tsc(void)
+{
+ int ret;
+ INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+ ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (!ret)
+ cpufreq_init = 1;
+ return ret;
+}
+core_initcall(cpufreq_tsc);
+
+#else /* CONFIG_CPU_FREQ */
+static inline void cpufreq_delayed_get(void) { return; }
+#endif
+
+static void mark_offset_tsc(void)
+{
+ unsigned long lost,delay;
+ unsigned long delta = last_tsc_low;
+ int count;
+ int countmp;
+ static int count1 = 0;
+ unsigned long long this_offset, last_offset;
+ static int lost_count = 0;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ /*
+ * It is important that these two operations happen almost at
+ * the same time. We do the RDTSC stuff first, since it's
+ * faster. To avoid any inconsistencies, we need interrupts
+ * disabled locally.
+ */
+
+ /*
+ * Interrupts are just disabled locally since the timer irq
+ * has the SA_INTERRUPT flag set. -arca
+ */
+
+ /* read Pentium cycle counter */
+
+ rdtsc(last_tsc_low, last_tsc_high);
+
+ spin_lock(&i8253_lock);
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb(PIT_CH0) << 8;
+
+ /*
+ * VIA686a test code... reset the latch if count > max + 1
+ * from timer_pit.c - cjb
+ */
+ if (count > LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
+ count = LATCH - 1;
+ }
+
+ spin_unlock(&i8253_lock);
+
+ if (pit_latch_buggy) {
+ /* get center value of last 3 time lutch */
+ if ((count2 >= count && count >= count1)
+ || (count1 >= count && count >= count2)) {
+ count2 = count1; count1 = count;
+ } else if ((count1 >= count2 && count2 >= count)
+ || (count >= count2 && count2 >= count1)) {
+ countmp = count;count = count2;
+ count2 = count1;count1 = countmp;
+ } else {
+ count2 = count1; count1 = count; count = count1;
+ }
+ }
+
+ /* lost tick compensation */
+ delta = last_tsc_low - delta;
+ {
+ register unsigned long eax, edx;
+ eax = delta;
+ __asm__("mull %2"
+ :"=a" (eax), "=d" (edx)
+ :"rm" (fast_gettimeoffset_quotient),
+ "0" (eax));
+ delta = edx;
+ }
+ delta += delay_at_last_interrupt;
+ lost = delta/(1000000/HZ);
+ delay = delta%(1000000/HZ);
+ if (lost >= 2) {
+ jiffies_64 += lost-1;
+
+ /* sanity check to ensure we're not always losing ticks */
+ if (lost_count++ > 100) {
+ printk(KERN_WARNING "Losing too many ticks!\n");
+ printk(KERN_WARNING "TSC cannot be used as a timesource. \n");
+ printk(KERN_WARNING "Possible reasons for this are:\n");
+ printk(KERN_WARNING " You're running with Speedstep,\n");
+ printk(KERN_WARNING " You don't have DMA enabled for your hard disk (see hdparm),\n");
+ printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (see dmesg).\n");
+ printk(KERN_WARNING "Falling back to a sane timesource now.\n");
+
+ clock_fallback();
+ }
+ /* ... but give the TSC a fair chance */
+ if (lost_count > 25)
+ cpufreq_delayed_get();
+ } else
+ lost_count = 0;
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ monotonic_base += cycles_2_ns(this_offset - last_offset);
+ write_sequnlock(&monotonic_lock);
+
+ /* calculate delay_at_last_interrupt */
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+ /* catch corner case where tick rollover occured
+ * between tsc and pit reads (as noted when
+ * usec delta is > 90% # of usecs/tick)
+ */
+ if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+ jiffies_64++;
+}
+
+static int __init init_tsc(char* override)
+{
+
+ /* check clock override */
+ if (override[0] && strncmp(override,"tsc",3)) {
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled()) {
+ printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n");
+ } else
+#endif
+ {
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * If we have APM enabled or the CPU clock speed is variable
+ * (CPU stops clock on HLT or slows clock to save power)
+ * then the TSC timestamps may diverge by up to 1 jiffy from
+ * 'real time' but nothing will break.
+ * The most frequent case is that the CPU is "woken" from a halt
+ * state by the timer interrupt itself, so we get 0 error. In the
+ * rare cases where a driver would "wake" the CPU and request a
+ * timestamp, the maximum error is < 1 jiffy. But timestamps are
+ * still perfectly ordered.
+ * Note that the TSC counter will be reset if APM suspends
+ * to disk; this won't break the kernel, though, 'cuz we're
+ * smart. See arch/i386/kernel/apm.c.
+ */
+ /*
+ * Firstly we have to do a CPU check for chips with
+ * a potentially buggy TSC. At this point we haven't run
+ * the ident/bugs checks so we must run this hook as it
+ * may turn off the TSC flag.
+ *
+ * NOTE: this doesn't yet handle SMP 486 machines where only
+ * some CPU's have a TSC. Thats never worked and nobody has
+ * moaned if you have the only one in the world - you fix it!
+ */
+
+ count2 = LATCH; /* initialize counter for mark_offset_tsc() */
+
+ if (cpu_has_tsc) {
+ unsigned long tsc_quotient;
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled()){
+ unsigned long result, remain;
+ printk("Using TSC for gettimeofday\n");
+ tsc_quotient = calibrate_tsc_hpet(NULL);
+ timer_tsc.mark_offset = &mark_offset_tsc_hpet;
+ /*
+ * Math to calculate hpet to usec multiplier
+ * Look for the comments at get_offset_tsc_hpet()
+ */
+ ASM_DIV64_REG(result, remain, hpet_tick,
+ 0, KERNEL_TICK_USEC);
+ if (remain > (hpet_tick >> 1))
+ result++; /* rounding the result */
+
+ hpet_usec_quotient = result;
+ } else
+#endif
+ {
+ tsc_quotient = calibrate_tsc();
+ }
+
+ if (tsc_quotient) {
+ fast_gettimeoffset_quotient = tsc_quotient;
+ use_tsc = 1;
+ /*
+ * We could be more selective here I suspect
+ * and just enable this for the next intel chips ?
+ */
+ /* report CPU clock rate in Hz.
+ * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+ * clock/second. Our precision is about 100 ppm.
+ */
+ { unsigned long eax=0, edx=1000;
+ __asm__("divl %2"
+ :"=a" (cpu_khz), "=d" (edx)
+ :"r" (tsc_quotient),
+ "0" (eax), "1" (edx));
+ printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+ }
+ set_cyc2ns_scale(cpu_khz/1000);
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+#ifndef CONFIG_X86_TSC
+/* disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c */
+static int __init tsc_setup(char *str)
+{
+ tsc_disable = 1;
+ return 1;
+}
+#else
+static int __init tsc_setup(char *str)
+{
+ printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+ "cannot disable TSC.\n");
+ return 1;
+}
+#endif
+__setup("notsc", tsc_setup);
+
+
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_tsc = {
+ .name = "tsc",
+ .mark_offset = mark_offset_tsc,
+ .get_offset = get_offset_tsc,
+ .monotonic_clock = monotonic_clock_tsc,
+ .delay = delay_tsc,
+};
+
+struct init_timer_opts __initdata timer_tsc_init = {
+ .init = init_tsc,
+ .opts = &timer_tsc,
+};
diff --git a/arch/i386/kernel/trampoline.S b/arch/i386/kernel/trampoline.S
new file mode 100644
index 0000000..fcce0e6
--- /dev/null
+++ b/arch/i386/kernel/trampoline.S
@@ -0,0 +1,80 @@
+/*
+ *
+ * Trampoline.S Derived from Setup.S by Linus Torvalds
+ *
+ * 4 Jan 1997 Michael Chastain: changed to gnu as.
+ *
+ * This is only used for booting secondary CPUs in SMP machine
+ *
+ * Entry: CS:IP point to the start of our code, we are
+ * in real mode with no stack, but the rest of the
+ * trampoline page to make our stack and everything else
+ * is a mystery.
+ *
+ * In fact we don't actually need a stack so we don't
+ * set one up.
+ *
+ * We jump into the boot/compressed/head.S code. So you'd
+ * better be running a compressed kernel image or you
+ * won't get very far.
+ *
+ * On entry to trampoline_data, the processor is in real mode
+ * with 16-bit addressing and 16-bit data. CS has some value
+ * and IP is zero. Thus, data addresses need to be absolute
+ * (no relocation) and are taken with regard to r_base.
+ *
+ * If you work on this file, check the object module with
+ * objdump --reloc to make sure there are no relocation
+ * entries except for:
+ *
+ * TYPE VALUE
+ * R_386_32 startup_32_smp
+ * R_386_32 boot_gdt_table
+ */
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+.data
+
+.code16
+
+ENTRY(trampoline_data)
+r_base = .
+ wbinvd # Needed for NUMA-Q should be harmless for others
+ mov %cs, %ax # Code and data in the same place
+ mov %ax, %ds
+
+ cli # We should be safe anyway
+
+ movl $0xA5A5A5A5, trampoline_data - r_base
+ # write marker for master knows we're running
+
+ /* GDT tables in non default location kernel can be beyond 16MB and
+ * lgdt will not be able to load the address as in real mode default
+ * operand size is 16bit. Use lgdtl instead to force operand size
+ * to 32 bit.
+ */
+
+ lidtl boot_idt - r_base # load idt with 0, 0
+ lgdtl boot_gdt - r_base # load gdt with whatever is appropriate
+
+ xor %ax, %ax
+ inc %ax # protected mode (PE) bit
+ lmsw %ax # into protected mode
+ # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S
+ ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET)
+
+ # These need to be in the same 64K segment as the above;
+ # hence we don't use the boot_gdt_descr defined in head.S
+boot_gdt:
+ .word __BOOT_DS + 7 # gdt limit
+ .long boot_gdt_table-__PAGE_OFFSET # gdt base
+
+boot_idt:
+ .word 0 # idt limit = 0
+ .long 0 # idt base = 0L
+
+.globl trampoline_end
+trampoline_end:
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
new file mode 100644
index 0000000..6c0e383
--- /dev/null
+++ b/arch/i386/kernel/traps.c
@@ -0,0 +1,1084 @@
+/*
+ * linux/arch/i386/traps.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * 'Traps.c' handles hardware traps and faults after we have saved some
+ * state in 'asm.s'.
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/kallsyms.h>
+#include <linux/ptrace.h>
+#include <linux/utsname.h>
+#include <linux/kprobes.h>
+
+#ifdef CONFIG_EISA
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+#endif
+
+#ifdef CONFIG_MCA
+#include <linux/mca.h>
+#endif
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/debugreg.h>
+#include <asm/desc.h>
+#include <asm/i387.h>
+#include <asm/nmi.h>
+
+#include <asm/smp.h>
+#include <asm/arch_hooks.h>
+#include <asm/kdebug.h>
+
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include "mach_traps.h"
+
+asmlinkage int system_call(void);
+
+struct desc_struct default_ldt[] = { { 0, 0 }, { 0, 0 }, { 0, 0 },
+ { 0, 0 }, { 0, 0 } };
+
+/* Do we ignore FPU interrupts ? */
+char ignore_fpu_irq = 0;
+
+/*
+ * The IDT has to be page-aligned to simplify the Pentium
+ * F0 0F bug workaround.. We have a special link segment
+ * for this.
+ */
+struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, };
+
+asmlinkage void divide_error(void);
+asmlinkage void debug(void);
+asmlinkage void nmi(void);
+asmlinkage void int3(void);
+asmlinkage void overflow(void);
+asmlinkage void bounds(void);
+asmlinkage void invalid_op(void);
+asmlinkage void device_not_available(void);
+asmlinkage void coprocessor_segment_overrun(void);
+asmlinkage void invalid_TSS(void);
+asmlinkage void segment_not_present(void);
+asmlinkage void stack_segment(void);
+asmlinkage void general_protection(void);
+asmlinkage void page_fault(void);
+asmlinkage void coprocessor_error(void);
+asmlinkage void simd_coprocessor_error(void);
+asmlinkage void alignment_check(void);
+asmlinkage void spurious_interrupt_bug(void);
+asmlinkage void machine_check(void);
+
+static int kstack_depth_to_print = 24;
+struct notifier_block *i386die_chain;
+static DEFINE_SPINLOCK(die_notifier_lock);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+ int err = 0;
+ unsigned long flags;
+ spin_lock_irqsave(&die_notifier_lock, flags);
+ err = notifier_chain_register(&i386die_chain, nb);
+ spin_unlock_irqrestore(&die_notifier_lock, flags);
+ return err;
+}
+
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+ return p > (void *)tinfo &&
+ p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+static inline unsigned long print_context_stack(struct thread_info *tinfo,
+ unsigned long *stack, unsigned long ebp)
+{
+ unsigned long addr;
+
+#ifdef CONFIG_FRAME_POINTER
+ while (valid_stack_ptr(tinfo, (void *)ebp)) {
+ addr = *(unsigned long *)(ebp + 4);
+ printk(" [<%08lx>] ", addr);
+ print_symbol("%s", addr);
+ printk("\n");
+ ebp = *(unsigned long *)ebp;
+ }
+#else
+ while (valid_stack_ptr(tinfo, stack)) {
+ addr = *stack++;
+ if (__kernel_text_address(addr)) {
+ printk(" [<%08lx>]", addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ }
+ }
+#endif
+ return ebp;
+}
+
+void show_trace(struct task_struct *task, unsigned long * stack)
+{
+ unsigned long ebp;
+
+ if (!task)
+ task = current;
+
+ if (task == current) {
+ /* Grab ebp right from our regs */
+ asm ("movl %%ebp, %0" : "=r" (ebp) : );
+ } else {
+ /* ebp is the last reg pushed by switch_to */
+ ebp = *(unsigned long *) task->thread.esp;
+ }
+
+ while (1) {
+ struct thread_info *context;
+ context = (struct thread_info *)
+ ((unsigned long)stack & (~(THREAD_SIZE - 1)));
+ ebp = print_context_stack(context, stack, ebp);
+ stack = (unsigned long*)context->previous_esp;
+ if (!stack)
+ break;
+ printk(" =======================\n");
+ }
+}
+
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+ unsigned long *stack;
+ int i;
+
+ if (esp == NULL) {
+ if (task)
+ esp = (unsigned long*)task->thread.esp;
+ else
+ esp = (unsigned long *)&esp;
+ }
+
+ stack = esp;
+ for(i = 0; i < kstack_depth_to_print; i++) {
+ if (kstack_end(stack))
+ break;
+ if (i && ((i % 8) == 0))
+ printk("\n ");
+ printk("%08lx ", *stack++);
+ }
+ printk("\nCall Trace:\n");
+ show_trace(task, esp);
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+ unsigned long stack;
+
+ show_trace(current, &stack);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_registers(struct pt_regs *regs)
+{
+ int i;
+ int in_kernel = 1;
+ unsigned long esp;
+ unsigned short ss;
+
+ esp = (unsigned long) (®s->esp);
+ ss = __KERNEL_DS;
+ if (regs->xcs & 3) {
+ in_kernel = 0;
+ esp = regs->esp;
+ ss = regs->xss & 0xffff;
+ }
+ print_modules();
+ printk("CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\nEFLAGS: %08lx"
+ " (%s) \n",
+ smp_processor_id(), 0xffff & regs->xcs, regs->eip,
+ print_tainted(), regs->eflags, system_utsname.release);
+ print_symbol("EIP is at %s\n", regs->eip);
+ printk("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n",
+ regs->eax, regs->ebx, regs->ecx, regs->edx);
+ printk("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n",
+ regs->esi, regs->edi, regs->ebp, esp);
+ printk("ds: %04x es: %04x ss: %04x\n",
+ regs->xds & 0xffff, regs->xes & 0xffff, ss);
+ printk("Process %s (pid: %d, threadinfo=%p task=%p)",
+ current->comm, current->pid, current_thread_info(), current);
+ /*
+ * When in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (in_kernel) {
+ u8 *eip;
+
+ printk("\nStack: ");
+ show_stack(NULL, (unsigned long*)esp);
+
+ printk("Code: ");
+
+ eip = (u8 *)regs->eip - 43;
+ for (i = 0; i < 64; i++, eip++) {
+ unsigned char c;
+
+ if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) {
+ printk(" Bad EIP value.");
+ break;
+ }
+ if (eip == (u8 *)regs->eip)
+ printk("<%02x> ", c);
+ else
+ printk("%02x ", c);
+ }
+ }
+ printk("\n");
+}
+
+static void handle_BUG(struct pt_regs *regs)
+{
+ unsigned short ud2;
+ unsigned short line;
+ char *file;
+ char c;
+ unsigned long eip;
+
+ if (regs->xcs & 3)
+ goto no_bug; /* Not in kernel */
+
+ eip = regs->eip;
+
+ if (eip < PAGE_OFFSET)
+ goto no_bug;
+ if (__get_user(ud2, (unsigned short *)eip))
+ goto no_bug;
+ if (ud2 != 0x0b0f)
+ goto no_bug;
+ if (__get_user(line, (unsigned short *)(eip + 2)))
+ goto bug;
+ if (__get_user(file, (char **)(eip + 4)) ||
+ (unsigned long)file < PAGE_OFFSET || __get_user(c, file))
+ file = "<bad filename>";
+
+ printk("------------[ cut here ]------------\n");
+ printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
+
+no_bug:
+ return;
+
+ /* Here we know it was a BUG but file-n-line is unavailable */
+bug:
+ printk("Kernel BUG\n");
+}
+
+void die(const char * str, struct pt_regs * regs, long err)
+{
+ static struct {
+ spinlock_t lock;
+ u32 lock_owner;
+ int lock_owner_depth;
+ } die = {
+ .lock = SPIN_LOCK_UNLOCKED,
+ .lock_owner = -1,
+ .lock_owner_depth = 0
+ };
+ static int die_counter;
+
+ if (die.lock_owner != _smp_processor_id()) {
+ console_verbose();
+ spin_lock_irq(&die.lock);
+ die.lock_owner = smp_processor_id();
+ die.lock_owner_depth = 0;
+ bust_spinlocks(1);
+ }
+
+ if (++die.lock_owner_depth < 3) {
+ int nl = 0;
+ handle_BUG(regs);
+ printk(KERN_ALERT "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
+#ifdef CONFIG_PREEMPT
+ printk("PREEMPT ");
+ nl = 1;
+#endif
+#ifdef CONFIG_SMP
+ printk("SMP ");
+ nl = 1;
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ printk("DEBUG_PAGEALLOC");
+ nl = 1;
+#endif
+ if (nl)
+ printk("\n");
+ notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV);
+ show_registers(regs);
+ } else
+ printk(KERN_ERR "Recursive die() failure, output suppressed\n");
+
+ bust_spinlocks(0);
+ die.lock_owner = -1;
+ spin_unlock_irq(&die.lock);
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+
+ if (panic_on_oops) {
+ printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+ ssleep(5);
+ panic("Fatal exception");
+ }
+ do_exit(SIGSEGV);
+}
+
+static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
+{
+ if (!(regs->eflags & VM_MASK) && !(3 & regs->xcs))
+ die(str, regs, err);
+}
+
+static void do_trap(int trapnr, int signr, char *str, int vm86,
+ struct pt_regs * regs, long error_code, siginfo_t *info)
+{
+ if (regs->eflags & VM_MASK) {
+ if (vm86)
+ goto vm86_trap;
+ goto trap_signal;
+ }
+
+ if (!(regs->xcs & 3))
+ goto kernel_trap;
+
+ trap_signal: {
+ struct task_struct *tsk = current;
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = trapnr;
+ if (info)
+ force_sig_info(signr, info, tsk);
+ else
+ force_sig(signr, tsk);
+ return;
+ }
+
+ kernel_trap: {
+ if (!fixup_exception(regs))
+ die(str, regs, error_code);
+ return;
+ }
+
+ vm86_trap: {
+ int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr);
+ if (ret) goto trap_signal;
+ return;
+ }
+}
+
+#define DO_ERROR(trapnr, signr, str, name) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
+}
+
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+ siginfo_t info; \
+ info.si_signo = signr; \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void __user *)siaddr; \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
+}
+
+#define DO_VM86_ERROR(trapnr, signr, str, name) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+}
+
+#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+ siginfo_t info; \
+ info.si_signo = signr; \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void __user *)siaddr; \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
+}
+
+DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->eip)
+#ifndef CONFIG_KPROBES
+DO_VM86_ERROR( 3, SIGTRAP, "int3", int3)
+#endif
+DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow)
+DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO( 6, SIGILL, "invalid operand", invalid_op, ILL_ILLOPN, regs->eip)
+DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
+DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
+DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
+
+fastcall void do_general_protection(struct pt_regs * regs, long error_code)
+{
+ int cpu = get_cpu();
+ struct tss_struct *tss = &per_cpu(init_tss, cpu);
+ struct thread_struct *thread = ¤t->thread;
+
+ /*
+ * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
+ * invalid offset set (the LAZY one) and the faulting thread has
+ * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS
+ * and we set the offset field correctly. Then we let the CPU to
+ * restart the faulting instruction.
+ */
+ if (tss->io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
+ thread->io_bitmap_ptr) {
+ memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
+ thread->io_bitmap_max);
+ /*
+ * If the previously set map was extending to higher ports
+ * than the current one, pad extra space with 0xff (no access).
+ */
+ if (thread->io_bitmap_max < tss->io_bitmap_max)
+ memset((char *) tss->io_bitmap +
+ thread->io_bitmap_max, 0xff,
+ tss->io_bitmap_max - thread->io_bitmap_max);
+ tss->io_bitmap_max = thread->io_bitmap_max;
+ tss->io_bitmap_base = IO_BITMAP_OFFSET;
+ put_cpu();
+ return;
+ }
+ put_cpu();
+
+ if (regs->eflags & VM_MASK)
+ goto gp_in_vm86;
+
+ if (!(regs->xcs & 3))
+ goto gp_in_kernel;
+
+ current->thread.error_code = error_code;
+ current->thread.trap_no = 13;
+ force_sig(SIGSEGV, current);
+ return;
+
+gp_in_vm86:
+ local_irq_enable();
+ handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
+ return;
+
+gp_in_kernel:
+ if (!fixup_exception(regs)) {
+ if (notify_die(DIE_GPF, "general protection fault", regs,
+ error_code, 13, SIGSEGV) == NOTIFY_STOP)
+ return;
+ die("general protection fault", regs, error_code);
+ }
+}
+
+static void mem_parity_error(unsigned char reason, struct pt_regs * regs)
+{
+ printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
+ printk("You probably have a hardware problem with your RAM chips\n");
+
+ /* Clear and disable the memory parity error line. */
+ clear_mem_error(reason);
+}
+
+static void io_check_error(unsigned char reason, struct pt_regs * regs)
+{
+ unsigned long i;
+
+ printk("NMI: IOCK error (debug interrupt?)\n");
+ show_registers(regs);
+
+ /* Re-enable the IOCK line, wait for a few seconds */
+ reason = (reason & 0xf) | 8;
+ outb(reason, 0x61);
+ i = 2000;
+ while (--i) udelay(1000);
+ reason &= ~8;
+ outb(reason, 0x61);
+}
+
+static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+{
+#ifdef CONFIG_MCA
+ /* Might actually be able to figure out what the guilty party
+ * is. */
+ if( MCA_bus ) {
+ mca_handle_nmi();
+ return;
+ }
+#endif
+ printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+ reason, smp_processor_id());
+ printk("Dazed and confused, but trying to continue\n");
+ printk("Do you have a strange power saving mode enabled?\n");
+}
+
+static DEFINE_SPINLOCK(nmi_print_lock);
+
+void die_nmi (struct pt_regs *regs, const char *msg)
+{
+ spin_lock(&nmi_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out.
+ */
+ bust_spinlocks(1);
+ printk(msg);
+ printk(" on CPU%d, eip %08lx, registers:\n",
+ smp_processor_id(), regs->eip);
+ show_registers(regs);
+ printk("console shuts up ...\n");
+ console_silent();
+ spin_unlock(&nmi_print_lock);
+ bust_spinlocks(0);
+ do_exit(SIGSEGV);
+}
+
+static void default_do_nmi(struct pt_regs * regs)
+{
+ unsigned char reason = 0;
+
+ /* Only the BSP gets external NMIs from the system. */
+ if (!smp_processor_id())
+ reason = get_nmi_reason();
+
+ if (!(reason & 0xc0)) {
+ if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT)
+ == NOTIFY_STOP)
+ return;
+#ifdef CONFIG_X86_LOCAL_APIC
+ /*
+ * Ok, so this is none of the documented NMI sources,
+ * so it must be the NMI watchdog.
+ */
+ if (nmi_watchdog) {
+ nmi_watchdog_tick(regs);
+ return;
+ }
+#endif
+ unknown_nmi_error(reason, regs);
+ return;
+ }
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 0, SIGINT) == NOTIFY_STOP)
+ return;
+ if (reason & 0x80)
+ mem_parity_error(reason, regs);
+ if (reason & 0x40)
+ io_check_error(reason, regs);
+ /*
+ * Reassert NMI in case it became active meanwhile
+ * as it's edge-triggered.
+ */
+ reassert_nmi();
+}
+
+static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
+{
+ return 0;
+}
+
+static nmi_callback_t nmi_callback = dummy_nmi_callback;
+
+fastcall void do_nmi(struct pt_regs * regs, long error_code)
+{
+ int cpu;
+
+ nmi_enter();
+
+ cpu = smp_processor_id();
+ ++nmi_count(cpu);
+
+ if (!nmi_callback(regs, cpu))
+ default_do_nmi(regs);
+
+ nmi_exit();
+}
+
+void set_nmi_callback(nmi_callback_t callback)
+{
+ nmi_callback = callback;
+}
+
+void unset_nmi_callback(void)
+{
+ nmi_callback = dummy_nmi_callback;
+}
+
+#ifdef CONFIG_KPROBES
+fastcall int do_int3(struct pt_regs *regs, long error_code)
+{
+ if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+ == NOTIFY_STOP)
+ return 1;
+ /* This is an interrupt gate, because kprobes wants interrupts
+ disabled. Normal trap handlers don't. */
+ restore_interrupts(regs);
+ do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
+ return 0;
+}
+#endif
+
+/*
+ * Our handling of the processor debug registers is non-trivial.
+ * We do not clear them on entry and exit from the kernel. Therefore
+ * it is possible to get a watchpoint trap here from inside the kernel.
+ * However, the code in ./ptrace.c has ensured that the user can
+ * only set watchpoints on userspace addresses. Therefore the in-kernel
+ * watchpoint trap can only occur in code which is reading/writing
+ * from user space. Such code must not hold kernel locks (since it
+ * can equally take a page fault), therefore it is safe to call
+ * force_sig_info even though that claims and releases locks.
+ *
+ * Code in ./signal.c ensures that the debug control register
+ * is restored before we deliver any signal, and therefore that
+ * user code runs with the correct debug control register even though
+ * we clear it here.
+ *
+ * Being careful here means that we don't have to be as careful in a
+ * lot of more complicated places (task switching can be a bit lazy
+ * about restoring all the debug state, and ptrace doesn't have to
+ * find every occurrence of the TF bit that could be saved away even
+ * by user code)
+ */
+fastcall void do_debug(struct pt_regs * regs, long error_code)
+{
+ unsigned int condition;
+ struct task_struct *tsk = current;
+
+ __asm__ __volatile__("movl %%db6,%0" : "=r" (condition));
+
+ if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
+ SIGTRAP) == NOTIFY_STOP)
+ return;
+ /* It's safe to allow irq's after DR6 has been saved */
+ if (regs->eflags & X86_EFLAGS_IF)
+ local_irq_enable();
+
+ /* Mask out spurious debug traps due to lazy DR7 setting */
+ if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
+ if (!tsk->thread.debugreg[7])
+ goto clear_dr7;
+ }
+
+ if (regs->eflags & VM_MASK)
+ goto debug_vm86;
+
+ /* Save debug status register where ptrace can see it */
+ tsk->thread.debugreg[6] = condition;
+
+ /*
+ * Single-stepping through TF: make sure we ignore any events in
+ * kernel space (but re-enable TF when returning to user mode).
+ */
+ if (condition & DR_STEP) {
+ /*
+ * We already checked v86 mode above, so we can
+ * check for kernel mode by just checking the CPL
+ * of CS.
+ */
+ if ((regs->xcs & 3) == 0)
+ goto clear_TF_reenable;
+ }
+
+ /* Ok, finally something we can handle */
+ send_sigtrap(tsk, regs, error_code);
+
+ /* Disable additional traps. They'll be re-enabled when
+ * the signal is delivered.
+ */
+clear_dr7:
+ __asm__("movl %0,%%db7"
+ : /* no output */
+ : "r" (0));
+ return;
+
+debug_vm86:
+ handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
+ return;
+
+clear_TF_reenable:
+ set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+ regs->eflags &= ~TF_MASK;
+ return;
+}
+
+/*
+ * Note that we play around with the 'TS' bit in an attempt to get
+ * the correct behaviour even in the presence of the asynchronous
+ * IRQ13 behaviour
+ */
+void math_error(void __user *eip)
+{
+ struct task_struct * task;
+ siginfo_t info;
+ unsigned short cwd, swd;
+
+ /*
+ * Save the info for the exception handler and clear the error.
+ */
+ task = current;
+ save_init_fpu(task);
+ task->thread.trap_no = 16;
+ task->thread.error_code = 0;
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = __SI_FAULT;
+ info.si_addr = eip;
+ /*
+ * (~cwd & swd) will mask out exceptions that are not set to unmasked
+ * status. 0x3f is the exception bits in these regs, 0x200 is the
+ * C1 reg you need in case of a stack fault, 0x040 is the stack
+ * fault bit. We should only be taking one exception at a time,
+ * so if this combination doesn't produce any single exception,
+ * then we have a bad program that isn't syncronizing its FPU usage
+ * and it will suffer the consequences since we won't be able to
+ * fully reproduce the context of the exception
+ */
+ cwd = get_fpu_cwd(task);
+ swd = get_fpu_swd(task);
+ switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+ case 0x000:
+ default:
+ break;
+ case 0x001: /* Invalid Op */
+ case 0x041: /* Stack Fault */
+ case 0x241: /* Stack Fault | Direction */
+ info.si_code = FPE_FLTINV;
+ /* Should we clear the SF or let user space do it ???? */
+ break;
+ case 0x002: /* Denormalize */
+ case 0x010: /* Underflow */
+ info.si_code = FPE_FLTUND;
+ break;
+ case 0x004: /* Zero Divide */
+ info.si_code = FPE_FLTDIV;
+ break;
+ case 0x008: /* Overflow */
+ info.si_code = FPE_FLTOVF;
+ break;
+ case 0x020: /* Precision */
+ info.si_code = FPE_FLTRES;
+ break;
+ }
+ force_sig_info(SIGFPE, &info, task);
+}
+
+fastcall void do_coprocessor_error(struct pt_regs * regs, long error_code)
+{
+ ignore_fpu_irq = 1;
+ math_error((void __user *)regs->eip);
+}
+
+static void simd_math_error(void __user *eip)
+{
+ struct task_struct * task;
+ siginfo_t info;
+ unsigned short mxcsr;
+
+ /*
+ * Save the info for the exception handler and clear the error.
+ */
+ task = current;
+ save_init_fpu(task);
+ task->thread.trap_no = 19;
+ task->thread.error_code = 0;
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = __SI_FAULT;
+ info.si_addr = eip;
+ /*
+ * The SIMD FPU exceptions are handled a little differently, as there
+ * is only a single status/control register. Thus, to determine which
+ * unmasked exception was caught we must mask the exception mask bits
+ * at 0x1f80, and then use these to mask the exception bits at 0x3f.
+ */
+ mxcsr = get_fpu_mxcsr(task);
+ switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
+ case 0x000:
+ default:
+ break;
+ case 0x001: /* Invalid Op */
+ info.si_code = FPE_FLTINV;
+ break;
+ case 0x002: /* Denormalize */
+ case 0x010: /* Underflow */
+ info.si_code = FPE_FLTUND;
+ break;
+ case 0x004: /* Zero Divide */
+ info.si_code = FPE_FLTDIV;
+ break;
+ case 0x008: /* Overflow */
+ info.si_code = FPE_FLTOVF;
+ break;
+ case 0x020: /* Precision */
+ info.si_code = FPE_FLTRES;
+ break;
+ }
+ force_sig_info(SIGFPE, &info, task);
+}
+
+fastcall void do_simd_coprocessor_error(struct pt_regs * regs,
+ long error_code)
+{
+ if (cpu_has_xmm) {
+ /* Handle SIMD FPU exceptions on PIII+ processors. */
+ ignore_fpu_irq = 1;
+ simd_math_error((void __user *)regs->eip);
+ } else {
+ /*
+ * Handle strange cache flush from user space exception
+ * in all other cases. This is undocumented behaviour.
+ */
+ if (regs->eflags & VM_MASK) {
+ handle_vm86_fault((struct kernel_vm86_regs *)regs,
+ error_code);
+ return;
+ }
+ die_if_kernel("cache flush denied", regs, error_code);
+ current->thread.trap_no = 19;
+ current->thread.error_code = error_code;
+ force_sig(SIGSEGV, current);
+ }
+}
+
+fastcall void do_spurious_interrupt_bug(struct pt_regs * regs,
+ long error_code)
+{
+#if 0
+ /* No need to warn about this any longer. */
+ printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+#endif
+}
+
+fastcall void setup_x86_bogus_stack(unsigned char * stk)
+{
+ unsigned long *switch16_ptr, *switch32_ptr;
+ struct pt_regs *regs;
+ unsigned long stack_top, stack_bot;
+ unsigned short iret_frame16_off;
+ int cpu = smp_processor_id();
+ /* reserve the space on 32bit stack for the magic switch16 pointer */
+ memmove(stk, stk + 8, sizeof(struct pt_regs));
+ switch16_ptr = (unsigned long *)(stk + sizeof(struct pt_regs));
+ regs = (struct pt_regs *)stk;
+ /* now the switch32 on 16bit stack */
+ stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
+ stack_top = stack_bot + CPU_16BIT_STACK_SIZE;
+ switch32_ptr = (unsigned long *)(stack_top - 8);
+ iret_frame16_off = CPU_16BIT_STACK_SIZE - 8 - 20;
+ /* copy iret frame on 16bit stack */
+ memcpy((void *)(stack_bot + iret_frame16_off), ®s->eip, 20);
+ /* fill in the switch pointers */
+ switch16_ptr[0] = (regs->esp & 0xffff0000) | iret_frame16_off;
+ switch16_ptr[1] = __ESPFIX_SS;
+ switch32_ptr[0] = (unsigned long)stk + sizeof(struct pt_regs) +
+ 8 - CPU_16BIT_STACK_SIZE;
+ switch32_ptr[1] = __KERNEL_DS;
+}
+
+fastcall unsigned char * fixup_x86_bogus_stack(unsigned short sp)
+{
+ unsigned long *switch32_ptr;
+ unsigned char *stack16, *stack32;
+ unsigned long stack_top, stack_bot;
+ int len;
+ int cpu = smp_processor_id();
+ stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
+ stack_top = stack_bot + CPU_16BIT_STACK_SIZE;
+ switch32_ptr = (unsigned long *)(stack_top - 8);
+ /* copy the data from 16bit stack to 32bit stack */
+ len = CPU_16BIT_STACK_SIZE - 8 - sp;
+ stack16 = (unsigned char *)(stack_bot + sp);
+ stack32 = (unsigned char *)
+ (switch32_ptr[0] + CPU_16BIT_STACK_SIZE - 8 - len);
+ memcpy(stack32, stack16, len);
+ return stack32;
+}
+
+/*
+ * 'math_state_restore()' saves the current math information in the
+ * old math state array, and gets the new ones from the current task
+ *
+ * Careful.. There are problems with IBM-designed IRQ13 behaviour.
+ * Don't touch unless you *really* know how it works.
+ *
+ * Must be called with kernel preemption disabled (in this case,
+ * local interrupts are disabled at the call-site in entry.S).
+ */
+asmlinkage void math_state_restore(struct pt_regs regs)
+{
+ struct thread_info *thread = current_thread_info();
+ struct task_struct *tsk = thread->task;
+
+ clts(); /* Allow maths ops (or we recurse) */
+ if (!tsk_used_math(tsk))
+ init_fpu(tsk);
+ restore_fpu(tsk);
+ thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
+}
+
+#ifndef CONFIG_MATH_EMULATION
+
+asmlinkage void math_emulate(long arg)
+{
+ printk("math-emulation not enabled and no coprocessor found.\n");
+ printk("killing %s.\n",current->comm);
+ force_sig(SIGFPE,current);
+ schedule();
+}
+
+#endif /* CONFIG_MATH_EMULATION */
+
+#ifdef CONFIG_X86_F00F_BUG
+void __init trap_init_f00f_bug(void)
+{
+ __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
+
+ /*
+ * Update the IDT descriptor and reload the IDT so that
+ * it uses the read-only mapped virtual address.
+ */
+ idt_descr.address = fix_to_virt(FIX_F00F_IDT);
+ __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+}
+#endif
+
+#define _set_gate(gate_addr,type,dpl,addr,seg) \
+do { \
+ int __d0, __d1; \
+ __asm__ __volatile__ ("movw %%dx,%%ax\n\t" \
+ "movw %4,%%dx\n\t" \
+ "movl %%eax,%0\n\t" \
+ "movl %%edx,%1" \
+ :"=m" (*((long *) (gate_addr))), \
+ "=m" (*(1+(long *) (gate_addr))), "=&a" (__d0), "=&d" (__d1) \
+ :"i" ((short) (0x8000+(dpl<<13)+(type<<8))), \
+ "3" ((char *) (addr)),"2" ((seg) << 16)); \
+} while (0)
+
+
+/*
+ * This needs to use 'idt_table' rather than 'idt', and
+ * thus use the _nonmapped_ version of the IDT, as the
+ * Pentium F0 0F bugfix can have resulted in the mapped
+ * IDT being write-protected.
+ */
+void set_intr_gate(unsigned int n, void *addr)
+{
+ _set_gate(idt_table+n,14,0,addr,__KERNEL_CS);
+}
+
+/*
+ * This routine sets up an interrupt gate at directory privilege level 3.
+ */
+static inline void set_system_intr_gate(unsigned int n, void *addr)
+{
+ _set_gate(idt_table+n, 14, 3, addr, __KERNEL_CS);
+}
+
+static void __init set_trap_gate(unsigned int n, void *addr)
+{
+ _set_gate(idt_table+n,15,0,addr,__KERNEL_CS);
+}
+
+static void __init set_system_gate(unsigned int n, void *addr)
+{
+ _set_gate(idt_table+n,15,3,addr,__KERNEL_CS);
+}
+
+static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
+{
+ _set_gate(idt_table+n,5,0,0,(gdt_entry<<3));
+}
+
+
+void __init trap_init(void)
+{
+#ifdef CONFIG_EISA
+ void __iomem *p = ioremap(0x0FFFD9, 4);
+ if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
+ EISA_bus = 1;
+ }
+ iounmap(p);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ init_apic_mappings();
+#endif
+
+ set_trap_gate(0,÷_error);
+ set_intr_gate(1,&debug);
+ set_intr_gate(2,&nmi);
+ set_system_intr_gate(3, &int3); /* int3-5 can be called from all */
+ set_system_gate(4,&overflow);
+ set_system_gate(5,&bounds);
+ set_trap_gate(6,&invalid_op);
+ set_trap_gate(7,&device_not_available);
+ set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS);
+ set_trap_gate(9,&coprocessor_segment_overrun);
+ set_trap_gate(10,&invalid_TSS);
+ set_trap_gate(11,&segment_not_present);
+ set_trap_gate(12,&stack_segment);
+ set_trap_gate(13,&general_protection);
+ set_intr_gate(14,&page_fault);
+ set_trap_gate(15,&spurious_interrupt_bug);
+ set_trap_gate(16,&coprocessor_error);
+ set_trap_gate(17,&alignment_check);
+#ifdef CONFIG_X86_MCE
+ set_trap_gate(18,&machine_check);
+#endif
+ set_trap_gate(19,&simd_coprocessor_error);
+
+ set_system_gate(SYSCALL_VECTOR,&system_call);
+
+ /*
+ * Should be a barrier for any external CPU state.
+ */
+ cpu_init();
+
+ trap_init_hook();
+}
+
+static int __init kstack_setup(char *s)
+{
+ kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+ return 0;
+}
+__setup("kstack=", kstack_setup);
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
new file mode 100644
index 0000000..2f3d52d
--- /dev/null
+++ b/arch/i386/kernel/vm86.c
@@ -0,0 +1,804 @@
+/*
+ * linux/kernel/vm86.c
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * 29 dec 2001 - Fixed oopses caused by unchecked access to the vm86
+ * stack - Manfred Spraul <manfreds@colorfullife.com>
+ *
+ * 22 mar 2002 - Manfred detected the stackfaults, but didn't handle
+ * them correctly. Now the emulation will be in a
+ * consistent state after stackfaults - Kasper Dupont
+ * <kasperd@daimi.au.dk>
+ *
+ * 22 mar 2002 - Added missing clear_IF in set_vflags_* Kasper Dupont
+ * <kasperd@daimi.au.dk>
+ *
+ * ?? ??? 2002 - Fixed premature returns from handle_vm86_fault
+ * caused by Kasper Dupont's changes - Stas Sergeev
+ *
+ * 4 apr 2002 - Fixed CHECK_IF_IN_TRAP broken by Stas' changes.
+ * Kasper Dupont <kasperd@daimi.au.dk>
+ *
+ * 9 apr 2002 - Changed syntax of macros in handle_vm86_fault.
+ * Kasper Dupont <kasperd@daimi.au.dk>
+ *
+ * 9 apr 2002 - Changed stack access macros to jump to a label
+ * instead of returning to userspace. This simplifies
+ * do_int, and is needed by handle_vm6_fault. Kasper
+ * Dupont <kasperd@daimi.au.dk>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+#include <asm/irq.h>
+
+/*
+ * Known problems:
+ *
+ * Interrupt handling is not guaranteed:
+ * - a real x86 will disable all interrupts for one instruction
+ * after a "mov ss,xx" to make stack handling atomic even without
+ * the 'lss' instruction. We can't guarantee this in v86 mode,
+ * as the next instruction might result in a page fault or similar.
+ * - a real x86 will have interrupts disabled for one instruction
+ * past the 'sti' that enables them. We don't bother with all the
+ * details yet.
+ *
+ * Let's hope these problems do not actually matter for anything.
+ */
+
+
+#define KVM86 ((struct kernel_vm86_struct *)regs)
+#define VMPI KVM86->vm86plus
+
+
+/*
+ * 8- and 16-bit register defines..
+ */
+#define AL(regs) (((unsigned char *)&((regs)->eax))[0])
+#define AH(regs) (((unsigned char *)&((regs)->eax))[1])
+#define IP(regs) (*(unsigned short *)&((regs)->eip))
+#define SP(regs) (*(unsigned short *)&((regs)->esp))
+
+/*
+ * virtual flags (16 and 32-bit versions)
+ */
+#define VFLAGS (*(unsigned short *)&(current->thread.v86flags))
+#define VEFLAGS (current->thread.v86flags)
+
+#define set_flags(X,new,mask) \
+((X) = ((X) & ~(mask)) | ((new) & (mask)))
+
+#define SAFE_MASK (0xDD5)
+#define RETURN_MASK (0xDFF)
+
+#define VM86_REGS_PART2 orig_eax
+#define VM86_REGS_SIZE1 \
+ ( (unsigned)( & (((struct kernel_vm86_regs *)0)->VM86_REGS_PART2) ) )
+#define VM86_REGS_SIZE2 (sizeof(struct kernel_vm86_regs) - VM86_REGS_SIZE1)
+
+struct pt_regs * FASTCALL(save_v86_state(struct kernel_vm86_regs * regs));
+struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs)
+{
+ struct tss_struct *tss;
+ struct pt_regs *ret;
+ unsigned long tmp;
+
+ /*
+ * This gets called from entry.S with interrupts disabled, but
+ * from process context. Enable interrupts here, before trying
+ * to access user space.
+ */
+ local_irq_enable();
+
+ if (!current->thread.vm86_info) {
+ printk("no vm86_info: BAD\n");
+ do_exit(SIGSEGV);
+ }
+ set_flags(regs->eflags, VEFLAGS, VIF_MASK | current->thread.v86mask);
+ tmp = copy_to_user(¤t->thread.vm86_info->regs,regs, VM86_REGS_SIZE1);
+ tmp += copy_to_user(¤t->thread.vm86_info->regs.VM86_REGS_PART2,
+ ®s->VM86_REGS_PART2, VM86_REGS_SIZE2);
+ tmp += put_user(current->thread.screen_bitmap,¤t->thread.vm86_info->screen_bitmap);
+ if (tmp) {
+ printk("vm86: could not access userspace vm86_info\n");
+ do_exit(SIGSEGV);
+ }
+
+ tss = &per_cpu(init_tss, get_cpu());
+ current->thread.esp0 = current->thread.saved_esp0;
+ current->thread.sysenter_cs = __KERNEL_CS;
+ load_esp0(tss, ¤t->thread);
+ current->thread.saved_esp0 = 0;
+ put_cpu();
+
+ loadsegment(fs, current->thread.saved_fs);
+ loadsegment(gs, current->thread.saved_gs);
+ ret = KVM86->regs32;
+ return ret;
+}
+
+static void mark_screen_rdonly(struct task_struct * tsk)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte, *mapped;
+ int i;
+
+ preempt_disable();
+ spin_lock(&tsk->mm->page_table_lock);
+ pgd = pgd_offset(tsk->mm, 0xA0000);
+ if (pgd_none_or_clear_bad(pgd))
+ goto out;
+ pud = pud_offset(pgd, 0xA0000);
+ if (pud_none_or_clear_bad(pud))
+ goto out;
+ pmd = pmd_offset(pud, 0xA0000);
+ if (pmd_none_or_clear_bad(pmd))
+ goto out;
+ pte = mapped = pte_offset_map(pmd, 0xA0000);
+ for (i = 0; i < 32; i++) {
+ if (pte_present(*pte))
+ set_pte(pte, pte_wrprotect(*pte));
+ pte++;
+ }
+ pte_unmap(mapped);
+out:
+ spin_unlock(&tsk->mm->page_table_lock);
+ preempt_enable();
+ flush_tlb();
+}
+
+
+
+static int do_vm86_irq_handling(int subfunction, int irqnumber);
+static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
+
+asmlinkage int sys_vm86old(struct pt_regs regs)
+{
+ struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs.ebx;
+ struct kernel_vm86_struct info; /* declare this _on top_,
+ * this avoids wasting of stack space.
+ * This remains on the stack until we
+ * return to 32 bit user space.
+ */
+ struct task_struct *tsk;
+ int tmp, ret = -EPERM;
+
+ tsk = current;
+ if (tsk->thread.saved_esp0)
+ goto out;
+ tmp = copy_from_user(&info, v86, VM86_REGS_SIZE1);
+ tmp += copy_from_user(&info.regs.VM86_REGS_PART2, &v86->regs.VM86_REGS_PART2,
+ (long)&info.vm86plus - (long)&info.regs.VM86_REGS_PART2);
+ ret = -EFAULT;
+ if (tmp)
+ goto out;
+ memset(&info.vm86plus, 0, (int)&info.regs32 - (int)&info.vm86plus);
+ info.regs32 = ®s;
+ tsk->thread.vm86_info = v86;
+ do_sys_vm86(&info, tsk);
+ ret = 0; /* we never return here */
+out:
+ return ret;
+}
+
+
+asmlinkage int sys_vm86(struct pt_regs regs)
+{
+ struct kernel_vm86_struct info; /* declare this _on top_,
+ * this avoids wasting of stack space.
+ * This remains on the stack until we
+ * return to 32 bit user space.
+ */
+ struct task_struct *tsk;
+ int tmp, ret;
+ struct vm86plus_struct __user *v86;
+
+ tsk = current;
+ switch (regs.ebx) {
+ case VM86_REQUEST_IRQ:
+ case VM86_FREE_IRQ:
+ case VM86_GET_IRQ_BITS:
+ case VM86_GET_AND_RESET_IRQ:
+ ret = do_vm86_irq_handling(regs.ebx, (int)regs.ecx);
+ goto out;
+ case VM86_PLUS_INSTALL_CHECK:
+ /* NOTE: on old vm86 stuff this will return the error
+ from verify_area(), because the subfunction is
+ interpreted as (invalid) address to vm86_struct.
+ So the installation check works.
+ */
+ ret = 0;
+ goto out;
+ }
+
+ /* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */
+ ret = -EPERM;
+ if (tsk->thread.saved_esp0)
+ goto out;
+ v86 = (struct vm86plus_struct __user *)regs.ecx;
+ tmp = copy_from_user(&info, v86, VM86_REGS_SIZE1);
+ tmp += copy_from_user(&info.regs.VM86_REGS_PART2, &v86->regs.VM86_REGS_PART2,
+ (long)&info.regs32 - (long)&info.regs.VM86_REGS_PART2);
+ ret = -EFAULT;
+ if (tmp)
+ goto out;
+ info.regs32 = ®s;
+ info.vm86plus.is_vm86pus = 1;
+ tsk->thread.vm86_info = (struct vm86_struct __user *)v86;
+ do_sys_vm86(&info, tsk);
+ ret = 0; /* we never return here */
+out:
+ return ret;
+}
+
+
+static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk)
+{
+ struct tss_struct *tss;
+/*
+ * make sure the vm86() system call doesn't try to do anything silly
+ */
+ info->regs.__null_ds = 0;
+ info->regs.__null_es = 0;
+
+/* we are clearing fs,gs later just before "jmp resume_userspace",
+ * because starting with Linux 2.1.x they aren't no longer saved/restored
+ */
+
+/*
+ * The eflags register is also special: we cannot trust that the user
+ * has set it up safely, so this makes sure interrupt etc flags are
+ * inherited from protected mode.
+ */
+ VEFLAGS = info->regs.eflags;
+ info->regs.eflags &= SAFE_MASK;
+ info->regs.eflags |= info->regs32->eflags & ~SAFE_MASK;
+ info->regs.eflags |= VM_MASK;
+
+ switch (info->cpu_type) {
+ case CPU_286:
+ tsk->thread.v86mask = 0;
+ break;
+ case CPU_386:
+ tsk->thread.v86mask = NT_MASK | IOPL_MASK;
+ break;
+ case CPU_486:
+ tsk->thread.v86mask = AC_MASK | NT_MASK | IOPL_MASK;
+ break;
+ default:
+ tsk->thread.v86mask = ID_MASK | AC_MASK | NT_MASK | IOPL_MASK;
+ break;
+ }
+
+/*
+ * Save old state, set default return value (%eax) to 0
+ */
+ info->regs32->eax = 0;
+ tsk->thread.saved_esp0 = tsk->thread.esp0;
+ asm volatile("movl %%fs,%0":"=m" (tsk->thread.saved_fs));
+ asm volatile("movl %%gs,%0":"=m" (tsk->thread.saved_gs));
+
+ tss = &per_cpu(init_tss, get_cpu());
+ tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0;
+ if (cpu_has_sep)
+ tsk->thread.sysenter_cs = 0;
+ load_esp0(tss, &tsk->thread);
+ put_cpu();
+
+ tsk->thread.screen_bitmap = info->screen_bitmap;
+ if (info->flags & VM86_SCREEN_BITMAP)
+ mark_screen_rdonly(tsk);
+ __asm__ __volatile__(
+ "xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t"
+ "movl %0,%%esp\n\t"
+ "movl %1,%%ebp\n\t"
+ "jmp resume_userspace"
+ : /* no outputs */
+ :"r" (&info->regs), "r" (tsk->thread_info) : "ax");
+ /* we never return here */
+}
+
+static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval)
+{
+ struct pt_regs * regs32;
+
+ regs32 = save_v86_state(regs16);
+ regs32->eax = retval;
+ __asm__ __volatile__("movl %0,%%esp\n\t"
+ "movl %1,%%ebp\n\t"
+ "jmp resume_userspace"
+ : : "r" (regs32), "r" (current_thread_info()));
+}
+
+static inline void set_IF(struct kernel_vm86_regs * regs)
+{
+ VEFLAGS |= VIF_MASK;
+ if (VEFLAGS & VIP_MASK)
+ return_to_32bit(regs, VM86_STI);
+}
+
+static inline void clear_IF(struct kernel_vm86_regs * regs)
+{
+ VEFLAGS &= ~VIF_MASK;
+}
+
+static inline void clear_TF(struct kernel_vm86_regs * regs)
+{
+ regs->eflags &= ~TF_MASK;
+}
+
+static inline void clear_AC(struct kernel_vm86_regs * regs)
+{
+ regs->eflags &= ~AC_MASK;
+}
+
+/* It is correct to call set_IF(regs) from the set_vflags_*
+ * functions. However someone forgot to call clear_IF(regs)
+ * in the opposite case.
+ * After the command sequence CLI PUSHF STI POPF you should
+ * end up with interrups disabled, but you ended up with
+ * interrupts enabled.
+ * ( I was testing my own changes, but the only bug I
+ * could find was in a function I had not changed. )
+ * [KD]
+ */
+
+static inline void set_vflags_long(unsigned long eflags, struct kernel_vm86_regs * regs)
+{
+ set_flags(VEFLAGS, eflags, current->thread.v86mask);
+ set_flags(regs->eflags, eflags, SAFE_MASK);
+ if (eflags & IF_MASK)
+ set_IF(regs);
+ else
+ clear_IF(regs);
+}
+
+static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs * regs)
+{
+ set_flags(VFLAGS, flags, current->thread.v86mask);
+ set_flags(regs->eflags, flags, SAFE_MASK);
+ if (flags & IF_MASK)
+ set_IF(regs);
+ else
+ clear_IF(regs);
+}
+
+static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
+{
+ unsigned long flags = regs->eflags & RETURN_MASK;
+
+ if (VEFLAGS & VIF_MASK)
+ flags |= IF_MASK;
+ flags |= IOPL_MASK;
+ return flags | (VEFLAGS & current->thread.v86mask);
+}
+
+static inline int is_revectored(int nr, struct revectored_struct * bitmap)
+{
+ __asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0"
+ :"=r" (nr)
+ :"m" (*bitmap),"r" (nr));
+ return nr;
+}
+
+#define val_byte(val, n) (((__u8 *)&val)[n])
+
+#define pushb(base, ptr, val, err_label) \
+ do { \
+ __u8 __val = val; \
+ ptr--; \
+ if (put_user(__val, base + ptr) < 0) \
+ goto err_label; \
+ } while(0)
+
+#define pushw(base, ptr, val, err_label) \
+ do { \
+ __u16 __val = val; \
+ ptr--; \
+ if (put_user(val_byte(__val, 1), base + ptr) < 0) \
+ goto err_label; \
+ ptr--; \
+ if (put_user(val_byte(__val, 0), base + ptr) < 0) \
+ goto err_label; \
+ } while(0)
+
+#define pushl(base, ptr, val, err_label) \
+ do { \
+ __u32 __val = val; \
+ ptr--; \
+ if (put_user(val_byte(__val, 3), base + ptr) < 0) \
+ goto err_label; \
+ ptr--; \
+ if (put_user(val_byte(__val, 2), base + ptr) < 0) \
+ goto err_label; \
+ ptr--; \
+ if (put_user(val_byte(__val, 1), base + ptr) < 0) \
+ goto err_label; \
+ ptr--; \
+ if (put_user(val_byte(__val, 0), base + ptr) < 0) \
+ goto err_label; \
+ } while(0)
+
+#define popb(base, ptr, err_label) \
+ ({ \
+ __u8 __res; \
+ if (get_user(__res, base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ __res; \
+ })
+
+#define popw(base, ptr, err_label) \
+ ({ \
+ __u16 __res; \
+ if (get_user(val_byte(__res, 0), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ if (get_user(val_byte(__res, 1), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ __res; \
+ })
+
+#define popl(base, ptr, err_label) \
+ ({ \
+ __u32 __res; \
+ if (get_user(val_byte(__res, 0), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ if (get_user(val_byte(__res, 1), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ if (get_user(val_byte(__res, 2), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ if (get_user(val_byte(__res, 3), base + ptr) < 0) \
+ goto err_label; \
+ ptr++; \
+ __res; \
+ })
+
+/* There are so many possible reasons for this function to return
+ * VM86_INTx, so adding another doesn't bother me. We can expect
+ * userspace programs to be able to handle it. (Getting a problem
+ * in userspace is always better than an Oops anyway.) [KD]
+ */
+static void do_int(struct kernel_vm86_regs *regs, int i,
+ unsigned char __user * ssp, unsigned short sp)
+{
+ unsigned long __user *intr_ptr;
+ unsigned long segoffs;
+
+ if (regs->cs == BIOSSEG)
+ goto cannot_handle;
+ if (is_revectored(i, &KVM86->int_revectored))
+ goto cannot_handle;
+ if (i==0x21 && is_revectored(AH(regs),&KVM86->int21_revectored))
+ goto cannot_handle;
+ intr_ptr = (unsigned long __user *) (i << 2);
+ if (get_user(segoffs, intr_ptr))
+ goto cannot_handle;
+ if ((segoffs >> 16) == BIOSSEG)
+ goto cannot_handle;
+ pushw(ssp, sp, get_vflags(regs), cannot_handle);
+ pushw(ssp, sp, regs->cs, cannot_handle);
+ pushw(ssp, sp, IP(regs), cannot_handle);
+ regs->cs = segoffs >> 16;
+ SP(regs) -= 6;
+ IP(regs) = segoffs & 0xffff;
+ clear_TF(regs);
+ clear_IF(regs);
+ clear_AC(regs);
+ return;
+
+cannot_handle:
+ return_to_32bit(regs, VM86_INTx + (i << 8));
+}
+
+int handle_vm86_trap(struct kernel_vm86_regs * regs, long error_code, int trapno)
+{
+ if (VMPI.is_vm86pus) {
+ if ( (trapno==3) || (trapno==1) )
+ return_to_32bit(regs, VM86_TRAP + (trapno << 8));
+ do_int(regs, trapno, (unsigned char __user *) (regs->ss << 4), SP(regs));
+ return 0;
+ }
+ if (trapno !=1)
+ return 1; /* we let this handle by the calling routine */
+ if (current->ptrace & PT_PTRACED) {
+ unsigned long flags;
+ spin_lock_irqsave(¤t->sighand->siglock, flags);
+ sigdelset(¤t->blocked, SIGTRAP);
+ recalc_sigpending();
+ spin_unlock_irqrestore(¤t->sighand->siglock, flags);
+ }
+ send_sig(SIGTRAP, current, 1);
+ current->thread.trap_no = trapno;
+ current->thread.error_code = error_code;
+ return 0;
+}
+
+void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
+{
+ unsigned char opcode;
+ unsigned char __user *csp;
+ unsigned char __user *ssp;
+ unsigned short ip, sp;
+ int data32, pref_done;
+
+#define CHECK_IF_IN_TRAP \
+ if (VMPI.vm86dbg_active && VMPI.vm86dbg_TFpendig) \
+ newflags |= TF_MASK
+#define VM86_FAULT_RETURN do { \
+ if (VMPI.force_return_for_pic && (VEFLAGS & (IF_MASK | VIF_MASK))) \
+ return_to_32bit(regs, VM86_PICRETURN); \
+ return; } while (0)
+
+ csp = (unsigned char __user *) (regs->cs << 4);
+ ssp = (unsigned char __user *) (regs->ss << 4);
+ sp = SP(regs);
+ ip = IP(regs);
+
+ data32 = 0;
+ pref_done = 0;
+ do {
+ switch (opcode = popb(csp, ip, simulate_sigsegv)) {
+ case 0x66: /* 32-bit data */ data32=1; break;
+ case 0x67: /* 32-bit address */ break;
+ case 0x2e: /* CS */ break;
+ case 0x3e: /* DS */ break;
+ case 0x26: /* ES */ break;
+ case 0x36: /* SS */ break;
+ case 0x65: /* GS */ break;
+ case 0x64: /* FS */ break;
+ case 0xf2: /* repnz */ break;
+ case 0xf3: /* rep */ break;
+ default: pref_done = 1;
+ }
+ } while (!pref_done);
+
+ switch (opcode) {
+
+ /* pushf */
+ case 0x9c:
+ if (data32) {
+ pushl(ssp, sp, get_vflags(regs), simulate_sigsegv);
+ SP(regs) -= 4;
+ } else {
+ pushw(ssp, sp, get_vflags(regs), simulate_sigsegv);
+ SP(regs) -= 2;
+ }
+ IP(regs) = ip;
+ VM86_FAULT_RETURN;
+
+ /* popf */
+ case 0x9d:
+ {
+ unsigned long newflags;
+ if (data32) {
+ newflags=popl(ssp, sp, simulate_sigsegv);
+ SP(regs) += 4;
+ } else {
+ newflags = popw(ssp, sp, simulate_sigsegv);
+ SP(regs) += 2;
+ }
+ IP(regs) = ip;
+ CHECK_IF_IN_TRAP;
+ if (data32) {
+ set_vflags_long(newflags, regs);
+ } else {
+ set_vflags_short(newflags, regs);
+ }
+ VM86_FAULT_RETURN;
+ }
+
+ /* int xx */
+ case 0xcd: {
+ int intno=popb(csp, ip, simulate_sigsegv);
+ IP(regs) = ip;
+ if (VMPI.vm86dbg_active) {
+ if ( (1 << (intno &7)) & VMPI.vm86dbg_intxxtab[intno >> 3] )
+ return_to_32bit(regs, VM86_INTx + (intno << 8));
+ }
+ do_int(regs, intno, ssp, sp);
+ return;
+ }
+
+ /* iret */
+ case 0xcf:
+ {
+ unsigned long newip;
+ unsigned long newcs;
+ unsigned long newflags;
+ if (data32) {
+ newip=popl(ssp, sp, simulate_sigsegv);
+ newcs=popl(ssp, sp, simulate_sigsegv);
+ newflags=popl(ssp, sp, simulate_sigsegv);
+ SP(regs) += 12;
+ } else {
+ newip = popw(ssp, sp, simulate_sigsegv);
+ newcs = popw(ssp, sp, simulate_sigsegv);
+ newflags = popw(ssp, sp, simulate_sigsegv);
+ SP(regs) += 6;
+ }
+ IP(regs) = newip;
+ regs->cs = newcs;
+ CHECK_IF_IN_TRAP;
+ if (data32) {
+ set_vflags_long(newflags, regs);
+ } else {
+ set_vflags_short(newflags, regs);
+ }
+ VM86_FAULT_RETURN;
+ }
+
+ /* cli */
+ case 0xfa:
+ IP(regs) = ip;
+ clear_IF(regs);
+ VM86_FAULT_RETURN;
+
+ /* sti */
+ /*
+ * Damn. This is incorrect: the 'sti' instruction should actually
+ * enable interrupts after the /next/ instruction. Not good.
+ *
+ * Probably needs some horsing around with the TF flag. Aiee..
+ */
+ case 0xfb:
+ IP(regs) = ip;
+ set_IF(regs);
+ VM86_FAULT_RETURN;
+
+ default:
+ return_to_32bit(regs, VM86_UNKNOWN);
+ }
+
+ return;
+
+simulate_sigsegv:
+ /* FIXME: After a long discussion with Stas we finally
+ * agreed, that this is wrong. Here we should
+ * really send a SIGSEGV to the user program.
+ * But how do we create the correct context? We
+ * are inside a general protection fault handler
+ * and has just returned from a page fault handler.
+ * The correct context for the signal handler
+ * should be a mixture of the two, but how do we
+ * get the information? [KD]
+ */
+ return_to_32bit(regs, VM86_UNKNOWN);
+}
+
+/* ---------------- vm86 special IRQ passing stuff ----------------- */
+
+#define VM86_IRQNAME "vm86irq"
+
+static struct vm86_irqs {
+ struct task_struct *tsk;
+ int sig;
+} vm86_irqs[16];
+
+static DEFINE_SPINLOCK(irqbits_lock);
+static int irqbits;
+
+#define ALLOWED_SIGS ( 1 /* 0 = don't send a signal */ \
+ | (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO) | (1 << SIGURG) \
+ | (1 << SIGUNUSED) )
+
+static irqreturn_t irq_handler(int intno, void *dev_id, struct pt_regs * regs)
+{
+ int irq_bit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irqbits_lock, flags);
+ irq_bit = 1 << intno;
+ if ((irqbits & irq_bit) || ! vm86_irqs[intno].tsk)
+ goto out;
+ irqbits |= irq_bit;
+ if (vm86_irqs[intno].sig)
+ send_sig(vm86_irqs[intno].sig, vm86_irqs[intno].tsk, 1);
+ spin_unlock_irqrestore(&irqbits_lock, flags);
+ /*
+ * IRQ will be re-enabled when user asks for the irq (whether
+ * polling or as a result of the signal)
+ */
+ disable_irq(intno);
+ return IRQ_HANDLED;
+
+out:
+ spin_unlock_irqrestore(&irqbits_lock, flags);
+ return IRQ_NONE;
+}
+
+static inline void free_vm86_irq(int irqnumber)
+{
+ unsigned long flags;
+
+ free_irq(irqnumber, NULL);
+ vm86_irqs[irqnumber].tsk = NULL;
+
+ spin_lock_irqsave(&irqbits_lock, flags);
+ irqbits &= ~(1 << irqnumber);
+ spin_unlock_irqrestore(&irqbits_lock, flags);
+}
+
+void release_vm86_irqs(struct task_struct *task)
+{
+ int i;
+ for (i = FIRST_VM86_IRQ ; i <= LAST_VM86_IRQ; i++)
+ if (vm86_irqs[i].tsk == task)
+ free_vm86_irq(i);
+}
+
+static inline int get_and_reset_irq(int irqnumber)
+{
+ int bit;
+ unsigned long flags;
+
+ if (invalid_vm86_irq(irqnumber)) return 0;
+ if (vm86_irqs[irqnumber].tsk != current) return 0;
+ spin_lock_irqsave(&irqbits_lock, flags);
+ bit = irqbits & (1 << irqnumber);
+ irqbits &= ~bit;
+ spin_unlock_irqrestore(&irqbits_lock, flags);
+ if (!bit)
+ return 0;
+ enable_irq(irqnumber);
+ return 1;
+}
+
+
+static int do_vm86_irq_handling(int subfunction, int irqnumber)
+{
+ int ret;
+ switch (subfunction) {
+ case VM86_GET_AND_RESET_IRQ: {
+ return get_and_reset_irq(irqnumber);
+ }
+ case VM86_GET_IRQ_BITS: {
+ return irqbits;
+ }
+ case VM86_REQUEST_IRQ: {
+ int sig = irqnumber >> 8;
+ int irq = irqnumber & 255;
+ if (!capable(CAP_SYS_ADMIN)) return -EPERM;
+ if (!((1 << sig) & ALLOWED_SIGS)) return -EPERM;
+ if (invalid_vm86_irq(irq)) return -EPERM;
+ if (vm86_irqs[irq].tsk) return -EPERM;
+ ret = request_irq(irq, &irq_handler, 0, VM86_IRQNAME, NULL);
+ if (ret) return ret;
+ vm86_irqs[irq].sig = sig;
+ vm86_irqs[irq].tsk = current;
+ return irq;
+ }
+ case VM86_FREE_IRQ: {
+ if (invalid_vm86_irq(irqnumber)) return -EPERM;
+ if (!vm86_irqs[irqnumber].tsk) return 0;
+ if (vm86_irqs[irqnumber].tsk != current) return -EPERM;
+ free_vm86_irq(irqnumber);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..e0512cc
--- /dev/null
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -0,0 +1,134 @@
+/* ld script to make i386 Linux kernel
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+jiffies = jiffies_64;
+SECTIONS
+{
+ . = __PAGE_OFFSET + 0x100000;
+ /* read-only */
+ _text = .; /* Text and read-only data */
+ .text : {
+ *(.text)
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ } = 0x9090
+
+ _etext = .; /* End of text section */
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ RODATA
+
+ /* writeable */
+ .data : { /* Data */
+ *(.data)
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ _edata = .; /* End of data section */
+
+ . = ALIGN(THREAD_SIZE); /* init_task */
+ .data.init_task : { *(.data.init_task) }
+
+ /* will be freed after init */
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : { *(.init.data) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : {
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+ SECURITY_INIT
+ . = ALIGN(4);
+ __alt_instructions = .;
+ .altinstructions : { *(.altinstructions) }
+ __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+ /* .exit.text is discard at runtime, not link time, to deal with references
+ from .altinstructions and .eh_frame */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
+ /* freed after init ends here */
+
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(.bss.page_aligned)
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_stop = .;
+
+ _end = . ;
+
+ /* This is where the kernel creates the early boot page tables */
+ . = ALIGN(4096);
+ pg0 = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+}
diff --git a/arch/i386/kernel/vsyscall-int80.S b/arch/i386/kernel/vsyscall-int80.S
new file mode 100644
index 0000000..530d052
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-int80.S
@@ -0,0 +1,53 @@
+/*
+ * Code for the vsyscall page. This version uses the old int $0x80 method.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ * for details.
+ */
+
+ .text
+ .globl __kernel_vsyscall
+ .type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+ int $0x80
+ ret
+.LEND_vsyscall:
+ .size __kernel_vsyscall,.-.LSTART_vsyscall
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+ .long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zR" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIEDLSI:
+ .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+ .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+ .long .LSTART_vsyscall-. /* PC-relative start address */
+ .long .LEND_vsyscall-.LSTART_vsyscall
+ .uleb128 0
+ .align 4
+.LENDFDEDLSI:
+ .previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S
new file mode 100644
index 0000000..c8fcf75
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-sigreturn.S
@@ -0,0 +1,142 @@
+/*
+ * Common code for the sigreturn entry points on the vsyscall page.
+ * So far this code is the same for both int80 and sysenter versions.
+ * This file is #include'd by vsyscall-*.S to define them after the
+ * vsyscall entry point. The kernel assumes that the addresses of these
+ * routines are constant for all vsyscall implementations.
+ */
+
+#include <asm/unistd.h>
+#include <asm/asm_offsets.h>
+
+
+/* XXX
+ Should these be named "_sigtramp" or something?
+*/
+
+ .text
+ .org __kernel_vsyscall+32
+ .globl __kernel_sigreturn
+ .type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+ popl %eax /* XXX does this mean it needs unwind info? */
+ movl $__NR_sigreturn, %eax
+ int $0x80
+.LEND_sigreturn:
+ .size __kernel_sigreturn,.-.LSTART_sigreturn
+
+ .balign 32
+ .globl __kernel_rt_sigreturn
+ .type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+ movl $__NR_rt_sigreturn, %eax
+ int $0x80
+.LEND_rt_sigreturn:
+ .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI1:
+ .long .LENDCIEDLSI1-.LSTARTCIEDLSI1
+.LSTARTCIEDLSI1:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zR" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0 /* DW_CFA_nop */
+ .align 4
+.LENDCIEDLSI1:
+ .long .LENDFDEDLSI1-.LSTARTFDEDLSI1 /* Length FDE */
+.LSTARTFDEDLSI1:
+ .long .LSTARTFDEDLSI1-.LSTARTFRAMEDLSI1 /* CIE pointer */
+ /* HACK: The dwarf2 unwind routines will subtract 1 from the
+ return address to get an address in the middle of the
+ presumed call instruction. Since we didn't get here via
+ a call, we need to include the nop before the real start
+ to make up for it. */
+ .long .LSTART_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_sigreturn-.LSTART_sigreturn+1
+ .uleb128 0 /* Augmentation */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ complicated by the fact that the "CFA" is always assumed to
+ be the value of the stack pointer in the caller. This means
+ that we must define the CFA of this body of code to be the
+ saved value of the stack pointer in the sigcontext. Which
+ also means that there is no fixed relation to the other
+ saved registers, which means that we must use DW_CFA_expression
+ to compute their addresses. It also means that when we
+ adjust the stack with the popl, we have to do it all over again. */
+
+#define do_cfa_expr(offset) \
+ .byte 0x0f; /* DW_CFA_def_cfa_expression */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+ .byte 0x06; /* DW_OP_deref */ \
+1:
+
+#define do_expr(regno, offset) \
+ .byte 0x10; /* DW_CFA_expression */ \
+ .uleb128 regno; /* regno */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+1:
+
+ do_cfa_expr(SIGCONTEXT_esp+4)
+ do_expr(0, SIGCONTEXT_eax+4)
+ do_expr(1, SIGCONTEXT_ecx+4)
+ do_expr(2, SIGCONTEXT_edx+4)
+ do_expr(3, SIGCONTEXT_ebx+4)
+ do_expr(5, SIGCONTEXT_ebp+4)
+ do_expr(6, SIGCONTEXT_esi+4)
+ do_expr(7, SIGCONTEXT_edi+4)
+ do_expr(8, SIGCONTEXT_eip+4)
+
+ .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */
+
+ do_cfa_expr(SIGCONTEXT_esp)
+ do_expr(0, SIGCONTEXT_eax)
+ do_expr(1, SIGCONTEXT_ecx)
+ do_expr(2, SIGCONTEXT_edx)
+ do_expr(3, SIGCONTEXT_ebx)
+ do_expr(5, SIGCONTEXT_ebp)
+ do_expr(6, SIGCONTEXT_esi)
+ do_expr(7, SIGCONTEXT_edi)
+ do_expr(8, SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDEDLSI1:
+
+ .long .LENDFDEDLSI2-.LSTARTFDEDLSI2 /* Length FDE */
+.LSTARTFDEDLSI2:
+ .long .LSTARTFDEDLSI2-.LSTARTFRAMEDLSI1 /* CIE pointer */
+ /* HACK: See above wrt unwind library assumptions. */
+ .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
+ .uleb128 0 /* Augmentation */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ slightly less complicated than the above, since we don't
+ modify the stack pointer in the process. */
+
+ do_cfa_expr(RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esp)
+ do_expr(0, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eax)
+ do_expr(1, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ecx)
+ do_expr(2, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edx)
+ do_expr(3, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebx)
+ do_expr(5, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebp)
+ do_expr(6, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esi)
+ do_expr(7, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edi)
+ do_expr(8, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDEDLSI2:
+ .previous
diff --git a/arch/i386/kernel/vsyscall-sysenter.S b/arch/i386/kernel/vsyscall-sysenter.S
new file mode 100644
index 0000000..4daefb2
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-sysenter.S
@@ -0,0 +1,104 @@
+/*
+ * Code for the vsyscall page. This version uses the sysenter instruction.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ * for details.
+ */
+
+ .text
+ .globl __kernel_vsyscall
+ .type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+ push %ecx
+.Lpush_ecx:
+ push %edx
+.Lpush_edx:
+ push %ebp
+.Lenter_kernel:
+ movl %esp,%ebp
+ sysenter
+
+ /* 7: align return point with nop's to make disassembly easier */
+ .space 7,0x90
+
+ /* 14: System call restart point is here! (SYSENTER_RETURN - 2) */
+ jmp .Lenter_kernel
+ /* 16: System call normal return point is here! */
+ .globl SYSENTER_RETURN /* Symbol used by entry.S. */
+SYSENTER_RETURN:
+ pop %ebp
+.Lpop_ebp:
+ pop %edx
+.Lpop_edx:
+ pop %ecx
+.Lpop_ecx:
+ ret
+.LEND_vsyscall:
+ .size __kernel_vsyscall,.-.LSTART_vsyscall
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+ .long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zR" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIEDLSI:
+ .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+ .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+ .long .LSTART_vsyscall-. /* PC-relative start address */
+ .long .LEND_vsyscall-.LSTART_vsyscall
+ .uleb128 0
+ /* What follows are the instructions for the table generation.
+ We have to record all changes of the stack pointer. */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpush_ecx-.LSTART_vsyscall
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x08 /* RA at offset 8 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpush_edx-.Lpush_ecx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x0c /* RA at offset 12 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lenter_kernel-.Lpush_edx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x10 /* RA at offset 16 now */
+ .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */
+ /* Finally the epilogue. */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_ebp-.Lenter_kernel
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x0c /* RA at offset 12 now */
+ .byte 0xc5 /* DW_CFA_restore %ebp */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_edx-.Lpop_ebp
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x08 /* RA at offset 8 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_ecx-.Lpop_edx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x04 /* RA at offset 4 now */
+ .align 4
+.LENDFDEDLSI:
+ .previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall.S b/arch/i386/kernel/vsyscall.S
new file mode 100644
index 0000000..b403890
--- /dev/null
+++ b/arch/i386/kernel/vsyscall.S
@@ -0,0 +1,15 @@
+#include <linux/init.h>
+
+__INITDATA
+
+ .globl vsyscall_int80_start, vsyscall_int80_end
+vsyscall_int80_start:
+ .incbin "arch/i386/kernel/vsyscall-int80.so"
+vsyscall_int80_end:
+
+ .globl vsyscall_sysenter_start, vsyscall_sysenter_end
+vsyscall_sysenter_start:
+ .incbin "arch/i386/kernel/vsyscall-sysenter.so"
+vsyscall_sysenter_end:
+
+__FINIT
diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S
new file mode 100644
index 0000000..3a8329d
--- /dev/null
+++ b/arch/i386/kernel/vsyscall.lds.S
@@ -0,0 +1,65 @@
+/*
+ * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page). This script controls its layout.
+ */
+#include <asm/asm_offsets.h>
+
+SECTIONS
+{
+ . = VSYSCALL_BASE + SIZEOF_HEADERS;
+
+ .hash : { *(.hash) } :text
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .gnu.version : { *(.gnu.version) }
+ .gnu.version_d : { *(.gnu.version_d) }
+ .gnu.version_r : { *(.gnu.version_r) }
+
+ /* This linker script is used both with -r and with -shared.
+ For the layouts to match, we need to skip more than enough
+ space for the dynamic symbol table et al. If this amount
+ is insufficient, ld -shared will barf. Just increase it here. */
+ . = VSYSCALL_BASE + 0x400;
+
+ .text : { *(.text) } :text =0x90909090
+
+ .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
+ .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .dynamic : { *(.dynamic) } :text :dynamic
+ .useless : {
+ *(.got.plt) *(.got)
+ *(.data .data.* .gnu.linkonce.d.*)
+ *(.dynbss)
+ *(.bss .bss.* .gnu.linkonce.b.*)
+ } :text
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+ text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+ LINUX_2.5 {
+ global:
+ __kernel_vsyscall;
+ __kernel_sigreturn;
+ __kernel_rt_sigreturn;
+
+ local: *;
+ };
+}
+
+/* The ELF entry point can be used to set the AT_SYSINFO value. */
+ENTRY(__kernel_vsyscall);
diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile
new file mode 100644
index 0000000..7b1932d
--- /dev/null
+++ b/arch/i386/lib/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for i386-specific library files..
+#
+
+
+lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
+ bitops.o
+
+lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
+lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o
diff --git a/arch/i386/lib/bitops.c b/arch/i386/lib/bitops.c
new file mode 100644
index 0000000..97db385
--- /dev/null
+++ b/arch/i386/lib/bitops.c
@@ -0,0 +1,70 @@
+#include <linux/bitops.h>
+#include <linux/module.h>
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_bit(const unsigned long *addr, int size, int offset)
+{
+ const unsigned long *p = addr + (offset >> 5);
+ int set = 0, bit = offset & 31, res;
+
+ if (bit) {
+ /*
+ * Look for nonzero in the first 32 bits:
+ */
+ __asm__("bsfl %1,%0\n\t"
+ "jne 1f\n\t"
+ "movl $32, %0\n"
+ "1:"
+ : "=r" (set)
+ : "r" (*p >> bit));
+ if (set < (32 - bit))
+ return set + offset;
+ set = 32 - bit;
+ p++;
+ }
+ /*
+ * No set bit yet, search remaining full words for a bit
+ */
+ res = find_first_bit (p, size - 32 * (p - addr));
+ return (offset + set + res);
+}
+EXPORT_SYMBOL(find_next_bit);
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_zero_bit(const unsigned long *addr, int size, int offset)
+{
+ unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
+ int set = 0, bit = offset & 31, res;
+
+ if (bit) {
+ /*
+ * Look for zero in the first 32 bits.
+ */
+ __asm__("bsfl %1,%0\n\t"
+ "jne 1f\n\t"
+ "movl $32, %0\n"
+ "1:"
+ : "=r" (set)
+ : "r" (~(*p >> bit)));
+ if (set < (32 - bit))
+ return set + offset;
+ set = 32 - bit;
+ p++;
+ }
+ /*
+ * No zero yet, search remaining full bytes for a zero
+ */
+ res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
+ return (offset + set + res);
+}
+EXPORT_SYMBOL(find_next_zero_bit);
diff --git a/arch/i386/lib/checksum.S b/arch/i386/lib/checksum.S
new file mode 100644
index 0000000..94c7867
--- /dev/null
+++ b/arch/i386/lib/checksum.S
@@ -0,0 +1,496 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * IP/TCP/UDP checksumming routines
+ *
+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ * Tom May, <ftom@netcom.com>
+ * Pentium Pro/II routines:
+ * Alexander Kjeldaas <astor@guardian.no>
+ * Finn Arne Gangstad <finnag@guardian.no>
+ * Lots of code moved from tcp.c and ip.c; see those files
+ * for more names.
+ *
+ * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception
+ * handling.
+ * Andi Kleen, add zeroing on error
+ * converted to pure assembler
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/errno.h>
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+/*
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+.text
+.align 4
+.globl csum_partial
+
+#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
+
+ /*
+ * Experiments with Ethernet and SLIP connections show that buff
+ * is aligned on either a 2-byte or 4-byte boundary. We get at
+ * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
+ * Fortunately, it is easy to convert 2-byte alignment to 4-byte
+ * alignment for the unrolled loop.
+ */
+csum_partial:
+ pushl %esi
+ pushl %ebx
+ movl 20(%esp),%eax # Function arg: unsigned int sum
+ movl 16(%esp),%ecx # Function arg: int len
+ movl 12(%esp),%esi # Function arg: unsigned char *buff
+ testl $3, %esi # Check alignment.
+ jz 2f # Jump if alignment is ok.
+ testl $1, %esi # Check alignment.
+ jz 10f # Jump if alignment is boundary of 2bytes.
+
+ # buf is odd
+ dec %ecx
+ jl 8f
+ movzbl (%esi), %ebx
+ adcl %ebx, %eax
+ roll $8, %eax
+ inc %esi
+ testl $2, %esi
+ jz 2f
+10:
+ subl $2, %ecx # Alignment uses up two bytes.
+ jae 1f # Jump if we had at least two bytes.
+ addl $2, %ecx # ecx was < 2. Deal with it.
+ jmp 4f
+1: movw (%esi), %bx
+ addl $2, %esi
+ addw %bx, %ax
+ adcl $0, %eax
+2:
+ movl %ecx, %edx
+ shrl $5, %ecx
+ jz 2f
+ testl %esi, %esi
+1: movl (%esi), %ebx
+ adcl %ebx, %eax
+ movl 4(%esi), %ebx
+ adcl %ebx, %eax
+ movl 8(%esi), %ebx
+ adcl %ebx, %eax
+ movl 12(%esi), %ebx
+ adcl %ebx, %eax
+ movl 16(%esi), %ebx
+ adcl %ebx, %eax
+ movl 20(%esi), %ebx
+ adcl %ebx, %eax
+ movl 24(%esi), %ebx
+ adcl %ebx, %eax
+ movl 28(%esi), %ebx
+ adcl %ebx, %eax
+ lea 32(%esi), %esi
+ dec %ecx
+ jne 1b
+ adcl $0, %eax
+2: movl %edx, %ecx
+ andl $0x1c, %edx
+ je 4f
+ shrl $2, %edx # This clears CF
+3: adcl (%esi), %eax
+ lea 4(%esi), %esi
+ dec %edx
+ jne 3b
+ adcl $0, %eax
+4: andl $3, %ecx
+ jz 7f
+ cmpl $2, %ecx
+ jb 5f
+ movw (%esi),%cx
+ leal 2(%esi),%esi
+ je 6f
+ shll $16,%ecx
+5: movb (%esi),%cl
+6: addl %ecx,%eax
+ adcl $0, %eax
+7:
+ testl $1, 12(%esp)
+ jz 8f
+ roll $8, %eax
+8:
+ popl %ebx
+ popl %esi
+ ret
+
+#else
+
+/* Version for PentiumII/PPro */
+
+csum_partial:
+ pushl %esi
+ pushl %ebx
+ movl 20(%esp),%eax # Function arg: unsigned int sum
+ movl 16(%esp),%ecx # Function arg: int len
+ movl 12(%esp),%esi # Function arg: const unsigned char *buf
+
+ testl $3, %esi
+ jnz 25f
+10:
+ movl %ecx, %edx
+ movl %ecx, %ebx
+ andl $0x7c, %ebx
+ shrl $7, %ecx
+ addl %ebx,%esi
+ shrl $2, %ebx
+ negl %ebx
+ lea 45f(%ebx,%ebx,2), %ebx
+ testl %esi, %esi
+ jmp *%ebx
+
+ # Handle 2-byte-aligned regions
+20: addw (%esi), %ax
+ lea 2(%esi), %esi
+ adcl $0, %eax
+ jmp 10b
+25:
+ testl $1, %esi
+ jz 30f
+ # buf is odd
+ dec %ecx
+ jl 90f
+ movzbl (%esi), %ebx
+ addl %ebx, %eax
+ adcl $0, %eax
+ roll $8, %eax
+ inc %esi
+ testl $2, %esi
+ jz 10b
+
+30: subl $2, %ecx
+ ja 20b
+ je 32f
+ addl $2, %ecx
+ jz 80f
+ movzbl (%esi),%ebx # csumming 1 byte, 2-aligned
+ addl %ebx, %eax
+ adcl $0, %eax
+ jmp 80f
+32:
+ addw (%esi), %ax # csumming 2 bytes, 2-aligned
+ adcl $0, %eax
+ jmp 80f
+
+40:
+ addl -128(%esi), %eax
+ adcl -124(%esi), %eax
+ adcl -120(%esi), %eax
+ adcl -116(%esi), %eax
+ adcl -112(%esi), %eax
+ adcl -108(%esi), %eax
+ adcl -104(%esi), %eax
+ adcl -100(%esi), %eax
+ adcl -96(%esi), %eax
+ adcl -92(%esi), %eax
+ adcl -88(%esi), %eax
+ adcl -84(%esi), %eax
+ adcl -80(%esi), %eax
+ adcl -76(%esi), %eax
+ adcl -72(%esi), %eax
+ adcl -68(%esi), %eax
+ adcl -64(%esi), %eax
+ adcl -60(%esi), %eax
+ adcl -56(%esi), %eax
+ adcl -52(%esi), %eax
+ adcl -48(%esi), %eax
+ adcl -44(%esi), %eax
+ adcl -40(%esi), %eax
+ adcl -36(%esi), %eax
+ adcl -32(%esi), %eax
+ adcl -28(%esi), %eax
+ adcl -24(%esi), %eax
+ adcl -20(%esi), %eax
+ adcl -16(%esi), %eax
+ adcl -12(%esi), %eax
+ adcl -8(%esi), %eax
+ adcl -4(%esi), %eax
+45:
+ lea 128(%esi), %esi
+ adcl $0, %eax
+ dec %ecx
+ jge 40b
+ movl %edx, %ecx
+50: andl $3, %ecx
+ jz 80f
+
+ # Handle the last 1-3 bytes without jumping
+ notl %ecx # 1->2, 2->1, 3->0, higher bits are masked
+ movl $0xffffff,%ebx # by the shll and shrl instructions
+ shll $3,%ecx
+ shrl %cl,%ebx
+ andl -128(%esi),%ebx # esi is 4-aligned so should be ok
+ addl %ebx,%eax
+ adcl $0,%eax
+80:
+ testl $1, 12(%esp)
+ jz 90f
+ roll $8, %eax
+90:
+ popl %ebx
+ popl %esi
+ ret
+
+#endif
+
+/*
+unsigned int csum_partial_copy_generic (const char *src, char *dst,
+ int len, int sum, int *src_err_ptr, int *dst_err_ptr)
+ */
+
+/*
+ * Copy from ds while checksumming, otherwise like csum_partial
+ *
+ * The macros SRC and DST specify the type of access for the instruction.
+ * thus we can call a custom exception handler for all access types.
+ *
+ * FIXME: could someone double-check whether I haven't mixed up some SRC and
+ * DST definitions? It's damn hard to trigger all cases. I hope I got
+ * them all but there's no guarantee.
+ */
+
+#define SRC(y...) \
+ 9999: y; \
+ .section __ex_table, "a"; \
+ .long 9999b, 6001f ; \
+ .previous
+
+#define DST(y...) \
+ 9999: y; \
+ .section __ex_table, "a"; \
+ .long 9999b, 6002f ; \
+ .previous
+
+.align 4
+.globl csum_partial_copy_generic
+
+#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
+
+#define ARGBASE 16
+#define FP 12
+
+csum_partial_copy_generic:
+ subl $4,%esp
+ pushl %edi
+ pushl %esi
+ pushl %ebx
+ movl ARGBASE+16(%esp),%eax # sum
+ movl ARGBASE+12(%esp),%ecx # len
+ movl ARGBASE+4(%esp),%esi # src
+ movl ARGBASE+8(%esp),%edi # dst
+
+ testl $2, %edi # Check alignment.
+ jz 2f # Jump if alignment is ok.
+ subl $2, %ecx # Alignment uses up two bytes.
+ jae 1f # Jump if we had at least two bytes.
+ addl $2, %ecx # ecx was < 2. Deal with it.
+ jmp 4f
+SRC(1: movw (%esi), %bx )
+ addl $2, %esi
+DST( movw %bx, (%edi) )
+ addl $2, %edi
+ addw %bx, %ax
+ adcl $0, %eax
+2:
+ movl %ecx, FP(%esp)
+ shrl $5, %ecx
+ jz 2f
+ testl %esi, %esi
+SRC(1: movl (%esi), %ebx )
+SRC( movl 4(%esi), %edx )
+ adcl %ebx, %eax
+DST( movl %ebx, (%edi) )
+ adcl %edx, %eax
+DST( movl %edx, 4(%edi) )
+
+SRC( movl 8(%esi), %ebx )
+SRC( movl 12(%esi), %edx )
+ adcl %ebx, %eax
+DST( movl %ebx, 8(%edi) )
+ adcl %edx, %eax
+DST( movl %edx, 12(%edi) )
+
+SRC( movl 16(%esi), %ebx )
+SRC( movl 20(%esi), %edx )
+ adcl %ebx, %eax
+DST( movl %ebx, 16(%edi) )
+ adcl %edx, %eax
+DST( movl %edx, 20(%edi) )
+
+SRC( movl 24(%esi), %ebx )
+SRC( movl 28(%esi), %edx )
+ adcl %ebx, %eax
+DST( movl %ebx, 24(%edi) )
+ adcl %edx, %eax
+DST( movl %edx, 28(%edi) )
+
+ lea 32(%esi), %esi
+ lea 32(%edi), %edi
+ dec %ecx
+ jne 1b
+ adcl $0, %eax
+2: movl FP(%esp), %edx
+ movl %edx, %ecx
+ andl $0x1c, %edx
+ je 4f
+ shrl $2, %edx # This clears CF
+SRC(3: movl (%esi), %ebx )
+ adcl %ebx, %eax
+DST( movl %ebx, (%edi) )
+ lea 4(%esi), %esi
+ lea 4(%edi), %edi
+ dec %edx
+ jne 3b
+ adcl $0, %eax
+4: andl $3, %ecx
+ jz 7f
+ cmpl $2, %ecx
+ jb 5f
+SRC( movw (%esi), %cx )
+ leal 2(%esi), %esi
+DST( movw %cx, (%edi) )
+ leal 2(%edi), %edi
+ je 6f
+ shll $16,%ecx
+SRC(5: movb (%esi), %cl )
+DST( movb %cl, (%edi) )
+6: addl %ecx, %eax
+ adcl $0, %eax
+7:
+5000:
+
+# Exception handler:
+.section .fixup, "ax"
+
+6001:
+ movl ARGBASE+20(%esp), %ebx # src_err_ptr
+ movl $-EFAULT, (%ebx)
+
+ # zero the complete destination - computing the rest
+ # is too much work
+ movl ARGBASE+8(%esp), %edi # dst
+ movl ARGBASE+12(%esp), %ecx # len
+ xorl %eax,%eax
+ rep ; stosb
+
+ jmp 5000b
+
+6002:
+ movl ARGBASE+24(%esp), %ebx # dst_err_ptr
+ movl $-EFAULT,(%ebx)
+ jmp 5000b
+
+.previous
+
+ popl %ebx
+ popl %esi
+ popl %edi
+ popl %ecx # equivalent to addl $4,%esp
+ ret
+
+#else
+
+/* Version for PentiumII/PPro */
+
+#define ROUND1(x) \
+ SRC(movl x(%esi), %ebx ) ; \
+ addl %ebx, %eax ; \
+ DST(movl %ebx, x(%edi) ) ;
+
+#define ROUND(x) \
+ SRC(movl x(%esi), %ebx ) ; \
+ adcl %ebx, %eax ; \
+ DST(movl %ebx, x(%edi) ) ;
+
+#define ARGBASE 12
+
+csum_partial_copy_generic:
+ pushl %ebx
+ pushl %edi
+ pushl %esi
+ movl ARGBASE+4(%esp),%esi #src
+ movl ARGBASE+8(%esp),%edi #dst
+ movl ARGBASE+12(%esp),%ecx #len
+ movl ARGBASE+16(%esp),%eax #sum
+# movl %ecx, %edx
+ movl %ecx, %ebx
+ movl %esi, %edx
+ shrl $6, %ecx
+ andl $0x3c, %ebx
+ negl %ebx
+ subl %ebx, %esi
+ subl %ebx, %edi
+ lea -1(%esi),%edx
+ andl $-32,%edx
+ lea 3f(%ebx,%ebx), %ebx
+ testl %esi, %esi
+ jmp *%ebx
+1: addl $64,%esi
+ addl $64,%edi
+ SRC(movb -32(%edx),%bl) ; SRC(movb (%edx),%bl)
+ ROUND1(-64) ROUND(-60) ROUND(-56) ROUND(-52)
+ ROUND (-48) ROUND(-44) ROUND(-40) ROUND(-36)
+ ROUND (-32) ROUND(-28) ROUND(-24) ROUND(-20)
+ ROUND (-16) ROUND(-12) ROUND(-8) ROUND(-4)
+3: adcl $0,%eax
+ addl $64, %edx
+ dec %ecx
+ jge 1b
+4: movl ARGBASE+12(%esp),%edx #len
+ andl $3, %edx
+ jz 7f
+ cmpl $2, %edx
+ jb 5f
+SRC( movw (%esi), %dx )
+ leal 2(%esi), %esi
+DST( movw %dx, (%edi) )
+ leal 2(%edi), %edi
+ je 6f
+ shll $16,%edx
+5:
+SRC( movb (%esi), %dl )
+DST( movb %dl, (%edi) )
+6: addl %edx, %eax
+ adcl $0, %eax
+7:
+.section .fixup, "ax"
+6001: movl ARGBASE+20(%esp), %ebx # src_err_ptr
+ movl $-EFAULT, (%ebx)
+ # zero the complete destination (computing the rest is too much work)
+ movl ARGBASE+8(%esp),%edi # dst
+ movl ARGBASE+12(%esp),%ecx # len
+ xorl %eax,%eax
+ rep; stosb
+ jmp 7b
+6002: movl ARGBASE+24(%esp), %ebx # dst_err_ptr
+ movl $-EFAULT, (%ebx)
+ jmp 7b
+.previous
+
+ popl %esi
+ popl %edi
+ popl %ebx
+ ret
+
+#undef ROUND
+#undef ROUND1
+
+#endif
diff --git a/arch/i386/lib/dec_and_lock.c b/arch/i386/lib/dec_and_lock.c
new file mode 100644
index 0000000..ab43394
--- /dev/null
+++ b/arch/i386/lib/dec_and_lock.c
@@ -0,0 +1,40 @@
+/*
+ * x86 version of "atomic_dec_and_lock()" using
+ * the atomic "cmpxchg" instruction.
+ *
+ * (For CPU's lacking cmpxchg, we use the slow
+ * generic version, and this one never even gets
+ * compiled).
+ */
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
+{
+ int counter;
+ int newcount;
+
+repeat:
+ counter = atomic_read(atomic);
+ newcount = counter-1;
+
+ if (!newcount)
+ goto slow_path;
+
+ asm volatile("lock; cmpxchgl %1,%2"
+ :"=a" (newcount)
+ :"r" (newcount), "m" (atomic->counter), "0" (counter));
+
+ /* If the above failed, "eax" will have changed */
+ if (newcount != counter)
+ goto repeat;
+ return 0;
+
+slow_path:
+ spin_lock(lock);
+ if (atomic_dec_and_test(atomic))
+ return 1;
+ spin_unlock(lock);
+ return 0;
+}
diff --git a/arch/i386/lib/delay.c b/arch/i386/lib/delay.c
new file mode 100644
index 0000000..080639f
--- /dev/null
+++ b/arch/i386/lib/delay.c
@@ -0,0 +1,49 @@
+/*
+ * Precise Delay Loops for i386
+ *
+ * Copyright (C) 1993 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * The __delay function must _NOT_ be inlined as its execution time
+ * depends wildly on alignment on many x86 processors. The additional
+ * jump magic is needed to get the timing stable on all the CPU's
+ * we have to worry about.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/timer.h>
+
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+extern struct timer_opts* timer;
+
+void __delay(unsigned long loops)
+{
+ cur_timer->delay(loops);
+}
+
+inline void __const_udelay(unsigned long xloops)
+{
+ int d0;
+ xloops *= 4;
+ __asm__("mull %0"
+ :"=d" (xloops), "=&a" (d0)
+ :"1" (xloops),"0" (cpu_data[_smp_processor_id()].loops_per_jiffy * (HZ/4)));
+ __delay(++xloops);
+}
+
+void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
+}
+
+void __ndelay(unsigned long nsecs)
+{
+ __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
+}
diff --git a/arch/i386/lib/getuser.S b/arch/i386/lib/getuser.S
new file mode 100644
index 0000000..62d7f17
--- /dev/null
+++ b/arch/i386/lib/getuser.S
@@ -0,0 +1,70 @@
+/*
+ * __get_user functions.
+ *
+ * (C) Copyright 1998 Linus Torvalds
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+#include <asm/thread_info.h>
+
+
+/*
+ * __get_user_X
+ *
+ * Inputs: %eax contains the address
+ *
+ * Outputs: %eax is error code (0 or -EFAULT)
+ * %edx contains zero-extended value
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+.text
+.align 4
+.globl __get_user_1
+__get_user_1:
+ GET_THREAD_INFO(%edx)
+ cmpl TI_addr_limit(%edx),%eax
+ jae bad_get_user
+1: movzbl (%eax),%edx
+ xorl %eax,%eax
+ ret
+
+.align 4
+.globl __get_user_2
+__get_user_2:
+ addl $1,%eax
+ jc bad_get_user
+ GET_THREAD_INFO(%edx)
+ cmpl TI_addr_limit(%edx),%eax
+ jae bad_get_user
+2: movzwl -1(%eax),%edx
+ xorl %eax,%eax
+ ret
+
+.align 4
+.globl __get_user_4
+__get_user_4:
+ addl $3,%eax
+ jc bad_get_user
+ GET_THREAD_INFO(%edx)
+ cmpl TI_addr_limit(%edx),%eax
+ jae bad_get_user
+3: movl -3(%eax),%edx
+ xorl %eax,%eax
+ ret
+
+bad_get_user:
+ xorl %edx,%edx
+ movl $-14,%eax
+ ret
+
+.section __ex_table,"a"
+ .long 1b,bad_get_user
+ .long 2b,bad_get_user
+ .long 3b,bad_get_user
+.previous
diff --git a/arch/i386/lib/memcpy.c b/arch/i386/lib/memcpy.c
new file mode 100644
index 0000000..891b235
--- /dev/null
+++ b/arch/i386/lib/memcpy.c
@@ -0,0 +1,44 @@
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#undef memcpy
+#undef memset
+
+void *memcpy(void *to, const void *from, size_t n)
+{
+#ifdef CONFIG_X86_USE_3DNOW
+ return __memcpy3d(to, from, n);
+#else
+ return __memcpy(to, from, n);
+#endif
+}
+EXPORT_SYMBOL(memcpy);
+
+void *memset(void *s, int c, size_t count)
+{
+ return __memset(s, c, count);
+}
+EXPORT_SYMBOL(memset);
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+ int d0, d1, d2;
+
+ if (dest < src) {
+ memcpy(dest,src,n);
+ } else {
+ __asm__ __volatile__(
+ "std\n\t"
+ "rep\n\t"
+ "movsb\n\t"
+ "cld"
+ : "=&c" (d0), "=&S" (d1), "=&D" (d2)
+ :"0" (n),
+ "1" (n-1+(const char *)src),
+ "2" (n-1+(char *)dest)
+ :"memory");
+ }
+ return dest;
+}
+EXPORT_SYMBOL(memmove);
diff --git a/arch/i386/lib/mmx.c b/arch/i386/lib/mmx.c
new file mode 100644
index 0000000..01f8b1a
--- /dev/null
+++ b/arch/i386/lib/mmx.c
@@ -0,0 +1,399 @@
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+
+#include <asm/i387.h>
+
+
+/*
+ * MMX 3DNow! library helper functions
+ *
+ * To do:
+ * We can use MMX just for prefetch in IRQ's. This may be a win.
+ * (reported so on K6-III)
+ * We should use a better code neutral filler for the short jump
+ * leal ebx. [ebx] is apparently best for K6-2, but Cyrix ??
+ * We also want to clobber the filler register so we don't get any
+ * register forwarding stalls on the filler.
+ *
+ * Add *user handling. Checksums are not a win with MMX on any CPU
+ * tested so far for any MMX solution figured.
+ *
+ * 22/09/2000 - Arjan van de Ven
+ * Improved for non-egineering-sample Athlons
+ *
+ */
+
+void *_mmx_memcpy(void *to, const void *from, size_t len)
+{
+ void *p;
+ int i;
+
+ if (unlikely(in_interrupt()))
+ return __memcpy(to, from, len);
+
+ p = to;
+ i = len >> 6; /* len/64 */
+
+ kernel_fpu_begin();
+
+ __asm__ __volatile__ (
+ "1: prefetch (%0)\n" /* This set is 28 bytes */
+ " prefetch 64(%0)\n"
+ " prefetch 128(%0)\n"
+ " prefetch 192(%0)\n"
+ " prefetch 256(%0)\n"
+ "2: \n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from) );
+
+
+ for(; i>5; i--)
+ {
+ __asm__ __volatile__ (
+ "1: prefetch 320(%0)\n"
+ "2: movq (%0), %%mm0\n"
+ " movq 8(%0), %%mm1\n"
+ " movq 16(%0), %%mm2\n"
+ " movq 24(%0), %%mm3\n"
+ " movq %%mm0, (%1)\n"
+ " movq %%mm1, 8(%1)\n"
+ " movq %%mm2, 16(%1)\n"
+ " movq %%mm3, 24(%1)\n"
+ " movq 32(%0), %%mm0\n"
+ " movq 40(%0), %%mm1\n"
+ " movq 48(%0), %%mm2\n"
+ " movq 56(%0), %%mm3\n"
+ " movq %%mm0, 32(%1)\n"
+ " movq %%mm1, 40(%1)\n"
+ " movq %%mm2, 48(%1)\n"
+ " movq %%mm3, 56(%1)\n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from), "r" (to) : "memory");
+ from+=64;
+ to+=64;
+ }
+
+ for(; i>0; i--)
+ {
+ __asm__ __volatile__ (
+ " movq (%0), %%mm0\n"
+ " movq 8(%0), %%mm1\n"
+ " movq 16(%0), %%mm2\n"
+ " movq 24(%0), %%mm3\n"
+ " movq %%mm0, (%1)\n"
+ " movq %%mm1, 8(%1)\n"
+ " movq %%mm2, 16(%1)\n"
+ " movq %%mm3, 24(%1)\n"
+ " movq 32(%0), %%mm0\n"
+ " movq 40(%0), %%mm1\n"
+ " movq 48(%0), %%mm2\n"
+ " movq 56(%0), %%mm3\n"
+ " movq %%mm0, 32(%1)\n"
+ " movq %%mm1, 40(%1)\n"
+ " movq %%mm2, 48(%1)\n"
+ " movq %%mm3, 56(%1)\n"
+ : : "r" (from), "r" (to) : "memory");
+ from+=64;
+ to+=64;
+ }
+ /*
+ * Now do the tail of the block
+ */
+ __memcpy(to, from, len&63);
+ kernel_fpu_end();
+ return p;
+}
+
+#ifdef CONFIG_MK7
+
+/*
+ * The K7 has streaming cache bypass load/store. The Cyrix III, K6 and
+ * other MMX using processors do not.
+ */
+
+static void fast_clear_page(void *page)
+{
+ int i;
+
+ kernel_fpu_begin();
+
+ __asm__ __volatile__ (
+ " pxor %%mm0, %%mm0\n" : :
+ );
+
+ for(i=0;i<4096/64;i++)
+ {
+ __asm__ __volatile__ (
+ " movntq %%mm0, (%0)\n"
+ " movntq %%mm0, 8(%0)\n"
+ " movntq %%mm0, 16(%0)\n"
+ " movntq %%mm0, 24(%0)\n"
+ " movntq %%mm0, 32(%0)\n"
+ " movntq %%mm0, 40(%0)\n"
+ " movntq %%mm0, 48(%0)\n"
+ " movntq %%mm0, 56(%0)\n"
+ : : "r" (page) : "memory");
+ page+=64;
+ }
+ /* since movntq is weakly-ordered, a "sfence" is needed to become
+ * ordered again.
+ */
+ __asm__ __volatile__ (
+ " sfence \n" : :
+ );
+ kernel_fpu_end();
+}
+
+static void fast_copy_page(void *to, void *from)
+{
+ int i;
+
+ kernel_fpu_begin();
+
+ /* maybe the prefetch stuff can go before the expensive fnsave...
+ * but that is for later. -AV
+ */
+ __asm__ __volatile__ (
+ "1: prefetch (%0)\n"
+ " prefetch 64(%0)\n"
+ " prefetch 128(%0)\n"
+ " prefetch 192(%0)\n"
+ " prefetch 256(%0)\n"
+ "2: \n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from) );
+
+ for(i=0; i<(4096-320)/64; i++)
+ {
+ __asm__ __volatile__ (
+ "1: prefetch 320(%0)\n"
+ "2: movq (%0), %%mm0\n"
+ " movntq %%mm0, (%1)\n"
+ " movq 8(%0), %%mm1\n"
+ " movntq %%mm1, 8(%1)\n"
+ " movq 16(%0), %%mm2\n"
+ " movntq %%mm2, 16(%1)\n"
+ " movq 24(%0), %%mm3\n"
+ " movntq %%mm3, 24(%1)\n"
+ " movq 32(%0), %%mm4\n"
+ " movntq %%mm4, 32(%1)\n"
+ " movq 40(%0), %%mm5\n"
+ " movntq %%mm5, 40(%1)\n"
+ " movq 48(%0), %%mm6\n"
+ " movntq %%mm6, 48(%1)\n"
+ " movq 56(%0), %%mm7\n"
+ " movntq %%mm7, 56(%1)\n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from), "r" (to) : "memory");
+ from+=64;
+ to+=64;
+ }
+ for(i=(4096-320)/64; i<4096/64; i++)
+ {
+ __asm__ __volatile__ (
+ "2: movq (%0), %%mm0\n"
+ " movntq %%mm0, (%1)\n"
+ " movq 8(%0), %%mm1\n"
+ " movntq %%mm1, 8(%1)\n"
+ " movq 16(%0), %%mm2\n"
+ " movntq %%mm2, 16(%1)\n"
+ " movq 24(%0), %%mm3\n"
+ " movntq %%mm3, 24(%1)\n"
+ " movq 32(%0), %%mm4\n"
+ " movntq %%mm4, 32(%1)\n"
+ " movq 40(%0), %%mm5\n"
+ " movntq %%mm5, 40(%1)\n"
+ " movq 48(%0), %%mm6\n"
+ " movntq %%mm6, 48(%1)\n"
+ " movq 56(%0), %%mm7\n"
+ " movntq %%mm7, 56(%1)\n"
+ : : "r" (from), "r" (to) : "memory");
+ from+=64;
+ to+=64;
+ }
+ /* since movntq is weakly-ordered, a "sfence" is needed to become
+ * ordered again.
+ */
+ __asm__ __volatile__ (
+ " sfence \n" : :
+ );
+ kernel_fpu_end();
+}
+
+#else
+
+/*
+ * Generic MMX implementation without K7 specific streaming
+ */
+
+static void fast_clear_page(void *page)
+{
+ int i;
+
+ kernel_fpu_begin();
+
+ __asm__ __volatile__ (
+ " pxor %%mm0, %%mm0\n" : :
+ );
+
+ for(i=0;i<4096/128;i++)
+ {
+ __asm__ __volatile__ (
+ " movq %%mm0, (%0)\n"
+ " movq %%mm0, 8(%0)\n"
+ " movq %%mm0, 16(%0)\n"
+ " movq %%mm0, 24(%0)\n"
+ " movq %%mm0, 32(%0)\n"
+ " movq %%mm0, 40(%0)\n"
+ " movq %%mm0, 48(%0)\n"
+ " movq %%mm0, 56(%0)\n"
+ " movq %%mm0, 64(%0)\n"
+ " movq %%mm0, 72(%0)\n"
+ " movq %%mm0, 80(%0)\n"
+ " movq %%mm0, 88(%0)\n"
+ " movq %%mm0, 96(%0)\n"
+ " movq %%mm0, 104(%0)\n"
+ " movq %%mm0, 112(%0)\n"
+ " movq %%mm0, 120(%0)\n"
+ : : "r" (page) : "memory");
+ page+=128;
+ }
+
+ kernel_fpu_end();
+}
+
+static void fast_copy_page(void *to, void *from)
+{
+ int i;
+
+
+ kernel_fpu_begin();
+
+ __asm__ __volatile__ (
+ "1: prefetch (%0)\n"
+ " prefetch 64(%0)\n"
+ " prefetch 128(%0)\n"
+ " prefetch 192(%0)\n"
+ " prefetch 256(%0)\n"
+ "2: \n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from) );
+
+ for(i=0; i<4096/64; i++)
+ {
+ __asm__ __volatile__ (
+ "1: prefetch 320(%0)\n"
+ "2: movq (%0), %%mm0\n"
+ " movq 8(%0), %%mm1\n"
+ " movq 16(%0), %%mm2\n"
+ " movq 24(%0), %%mm3\n"
+ " movq %%mm0, (%1)\n"
+ " movq %%mm1, 8(%1)\n"
+ " movq %%mm2, 16(%1)\n"
+ " movq %%mm3, 24(%1)\n"
+ " movq 32(%0), %%mm0\n"
+ " movq 40(%0), %%mm1\n"
+ " movq 48(%0), %%mm2\n"
+ " movq 56(%0), %%mm3\n"
+ " movq %%mm0, 32(%1)\n"
+ " movq %%mm1, 40(%1)\n"
+ " movq %%mm2, 48(%1)\n"
+ " movq %%mm3, 56(%1)\n"
+ ".section .fixup, \"ax\"\n"
+ "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b, 3b\n"
+ ".previous"
+ : : "r" (from), "r" (to) : "memory");
+ from+=64;
+ to+=64;
+ }
+ kernel_fpu_end();
+}
+
+
+#endif
+
+/*
+ * Favour MMX for page clear and copy.
+ */
+
+static void slow_zero_page(void * page)
+{
+ int d0, d1;
+ __asm__ __volatile__( \
+ "cld\n\t" \
+ "rep ; stosl" \
+ : "=&c" (d0), "=&D" (d1)
+ :"a" (0),"1" (page),"0" (1024)
+ :"memory");
+}
+
+void mmx_clear_page(void * page)
+{
+ if(unlikely(in_interrupt()))
+ slow_zero_page(page);
+ else
+ fast_clear_page(page);
+}
+
+static void slow_copy_page(void *to, void *from)
+{
+ int d0, d1, d2;
+ __asm__ __volatile__( \
+ "cld\n\t" \
+ "rep ; movsl" \
+ : "=&c" (d0), "=&D" (d1), "=&S" (d2) \
+ : "0" (1024),"1" ((long) to),"2" ((long) from) \
+ : "memory");
+}
+
+
+void mmx_copy_page(void *to, void *from)
+{
+ if(unlikely(in_interrupt()))
+ slow_copy_page(to, from);
+ else
+ fast_copy_page(to, from);
+}
diff --git a/arch/i386/lib/putuser.S b/arch/i386/lib/putuser.S
new file mode 100644
index 0000000..a32d9f5
--- /dev/null
+++ b/arch/i386/lib/putuser.S
@@ -0,0 +1,87 @@
+/*
+ * __put_user functions.
+ *
+ * (C) Copyright 2005 Linus Torvalds
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+#include <asm/thread_info.h>
+
+
+/*
+ * __put_user_X
+ *
+ * Inputs: %eax[:%edx] contains the data
+ * %ecx contains the address
+ *
+ * Outputs: %eax is error code (0 or -EFAULT)
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#define ENTER pushl %ebx ; GET_THREAD_INFO(%ebx)
+#define EXIT popl %ebx ; ret
+
+.text
+.align 4
+.globl __put_user_1
+__put_user_1:
+ ENTER
+ cmpl TI_addr_limit(%ebx),%ecx
+ jae bad_put_user
+1: movb %al,(%ecx)
+ xorl %eax,%eax
+ EXIT
+
+.align 4
+.globl __put_user_2
+__put_user_2:
+ ENTER
+ movl TI_addr_limit(%ebx),%ebx
+ subl $1,%ebx
+ cmpl %ebx,%ecx
+ jae bad_put_user
+2: movw %ax,(%ecx)
+ xorl %eax,%eax
+ EXIT
+
+.align 4
+.globl __put_user_4
+__put_user_4:
+ ENTER
+ movl TI_addr_limit(%ebx),%ebx
+ subl $3,%ebx
+ cmpl %ebx,%ecx
+ jae bad_put_user
+3: movl %eax,(%ecx)
+ xorl %eax,%eax
+ EXIT
+
+.align 4
+.globl __put_user_8
+__put_user_8:
+ ENTER
+ movl TI_addr_limit(%ebx),%ebx
+ subl $7,%ebx
+ cmpl %ebx,%ecx
+ jae bad_put_user
+4: movl %eax,(%ecx)
+5: movl %edx,4(%ecx)
+ xorl %eax,%eax
+ EXIT
+
+bad_put_user:
+ movl $-14,%eax
+ EXIT
+
+.section __ex_table,"a"
+ .long 1b,bad_put_user
+ .long 2b,bad_put_user
+ .long 3b,bad_put_user
+ .long 4b,bad_put_user
+ .long 5b,bad_put_user
+.previous
diff --git a/arch/i386/lib/strstr.c b/arch/i386/lib/strstr.c
new file mode 100644
index 0000000..a3dafbf
--- /dev/null
+++ b/arch/i386/lib/strstr.c
@@ -0,0 +1,31 @@
+#include <linux/string.h>
+
+char * strstr(const char * cs,const char * ct)
+{
+int d0, d1;
+register char * __res;
+__asm__ __volatile__(
+ "movl %6,%%edi\n\t"
+ "repne\n\t"
+ "scasb\n\t"
+ "notl %%ecx\n\t"
+ "decl %%ecx\n\t" /* NOTE! This also sets Z if searchstring='' */
+ "movl %%ecx,%%edx\n"
+ "1:\tmovl %6,%%edi\n\t"
+ "movl %%esi,%%eax\n\t"
+ "movl %%edx,%%ecx\n\t"
+ "repe\n\t"
+ "cmpsb\n\t"
+ "je 2f\n\t" /* also works for empty string, see above */
+ "xchgl %%eax,%%esi\n\t"
+ "incl %%esi\n\t"
+ "cmpb $0,-1(%%eax)\n\t"
+ "jne 1b\n\t"
+ "xorl %%eax,%%eax\n\t"
+ "2:"
+ :"=a" (__res), "=&c" (d0), "=&S" (d1)
+ :"0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
+ :"dx", "di");
+return __res;
+}
+
diff --git a/arch/i386/lib/usercopy.c b/arch/i386/lib/usercopy.c
new file mode 100644
index 0000000..51aa2bb
--- /dev/null
+++ b/arch/i386/lib/usercopy.c
@@ -0,0 +1,636 @@
+/*
+ * User address space access functions.
+ * The non inlined parts of asm-i386/uaccess.h are here.
+ *
+ * Copyright 1997 Andi Kleen <ak@muc.de>
+ * Copyright 1997 Linus Torvalds
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/blkdev.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <asm/mmx.h>
+
+static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n)
+{
+#ifdef CONFIG_X86_INTEL_USERCOPY
+ if (n >= 64 && ((a1 ^ a2) & movsl_mask.mask))
+ return 0;
+#endif
+ return 1;
+}
+#define movsl_is_ok(a1,a2,n) \
+ __movsl_is_ok((unsigned long)(a1),(unsigned long)(a2),(n))
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+#define __do_strncpy_from_user(dst,src,count,res) \
+do { \
+ int __d0, __d1, __d2; \
+ might_sleep(); \
+ __asm__ __volatile__( \
+ " testl %1,%1\n" \
+ " jz 2f\n" \
+ "0: lodsb\n" \
+ " stosb\n" \
+ " testb %%al,%%al\n" \
+ " jz 1f\n" \
+ " decl %1\n" \
+ " jnz 0b\n" \
+ "1: subl %1,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: movl %5,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 0b,3b\n" \
+ ".previous" \
+ : "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
+ "=&D" (__d2) \
+ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
+ : "memory"); \
+} while (0)
+
+/**
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+
+/*
+ * Zero Userspace
+ */
+
+#define __do_clear_user(addr,size) \
+do { \
+ int __d0; \
+ might_sleep(); \
+ __asm__ __volatile__( \
+ "0: rep; stosl\n" \
+ " movl %2,%0\n" \
+ "1: rep; stosb\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: lea 0(%2,%0,4),%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,2b\n" \
+ ".previous" \
+ : "=&c"(size), "=&D" (__d0) \
+ : "r"(size & 3), "0"(size / 4), "1"(addr), "a"(0)); \
+} while (0)
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long
+clear_user(void __user *to, unsigned long n)
+{
+ might_sleep();
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_clear_user(to, n);
+ return n;
+}
+
+/**
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long
+__clear_user(void __user *to, unsigned long n)
+{
+ __do_clear_user(to, n);
+ return n;
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @s: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+long strnlen_user(const char __user *s, long n)
+{
+ unsigned long mask = -__addr_ok(s);
+ unsigned long res, tmp;
+
+ might_sleep();
+
+ __asm__ __volatile__(
+ " testl %0, %0\n"
+ " jz 3f\n"
+ " andl %0,%%ecx\n"
+ "0: repne; scasb\n"
+ " setne %%al\n"
+ " subl %%ecx,%0\n"
+ " addl %0,%%eax\n"
+ "1:\n"
+ ".section .fixup,\"ax\"\n"
+ "2: xorl %%eax,%%eax\n"
+ " jmp 1b\n"
+ "3: movb $1,%%al\n"
+ " jmp 1b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 0b,2b\n"
+ ".previous"
+ :"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
+ :"0" (n), "1" (s), "2" (0), "3" (mask)
+ :"cc");
+ return res & mask;
+}
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+static unsigned long
+__copy_user_intel(void __user *to, const void *from, unsigned long size)
+{
+ int d0, d1;
+ __asm__ __volatile__(
+ " .align 2,0x90\n"
+ "1: movl 32(%4), %%eax\n"
+ " cmpl $67, %0\n"
+ " jbe 3f\n"
+ "2: movl 64(%4), %%eax\n"
+ " .align 2,0x90\n"
+ "3: movl 0(%4), %%eax\n"
+ "4: movl 4(%4), %%edx\n"
+ "5: movl %%eax, 0(%3)\n"
+ "6: movl %%edx, 4(%3)\n"
+ "7: movl 8(%4), %%eax\n"
+ "8: movl 12(%4),%%edx\n"
+ "9: movl %%eax, 8(%3)\n"
+ "10: movl %%edx, 12(%3)\n"
+ "11: movl 16(%4), %%eax\n"
+ "12: movl 20(%4), %%edx\n"
+ "13: movl %%eax, 16(%3)\n"
+ "14: movl %%edx, 20(%3)\n"
+ "15: movl 24(%4), %%eax\n"
+ "16: movl 28(%4), %%edx\n"
+ "17: movl %%eax, 24(%3)\n"
+ "18: movl %%edx, 28(%3)\n"
+ "19: movl 32(%4), %%eax\n"
+ "20: movl 36(%4), %%edx\n"
+ "21: movl %%eax, 32(%3)\n"
+ "22: movl %%edx, 36(%3)\n"
+ "23: movl 40(%4), %%eax\n"
+ "24: movl 44(%4), %%edx\n"
+ "25: movl %%eax, 40(%3)\n"
+ "26: movl %%edx, 44(%3)\n"
+ "27: movl 48(%4), %%eax\n"
+ "28: movl 52(%4), %%edx\n"
+ "29: movl %%eax, 48(%3)\n"
+ "30: movl %%edx, 52(%3)\n"
+ "31: movl 56(%4), %%eax\n"
+ "32: movl 60(%4), %%edx\n"
+ "33: movl %%eax, 56(%3)\n"
+ "34: movl %%edx, 60(%3)\n"
+ " addl $-64, %0\n"
+ " addl $64, %4\n"
+ " addl $64, %3\n"
+ " cmpl $63, %0\n"
+ " ja 1b\n"
+ "35: movl %0, %%eax\n"
+ " shrl $2, %0\n"
+ " andl $3, %%eax\n"
+ " cld\n"
+ "99: rep; movsl\n"
+ "36: movl %%eax, %0\n"
+ "37: rep; movsb\n"
+ "100:\n"
+ ".section .fixup,\"ax\"\n"
+ "101: lea 0(%%eax,%0,4),%0\n"
+ " jmp 100b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,100b\n"
+ " .long 2b,100b\n"
+ " .long 3b,100b\n"
+ " .long 4b,100b\n"
+ " .long 5b,100b\n"
+ " .long 6b,100b\n"
+ " .long 7b,100b\n"
+ " .long 8b,100b\n"
+ " .long 9b,100b\n"
+ " .long 10b,100b\n"
+ " .long 11b,100b\n"
+ " .long 12b,100b\n"
+ " .long 13b,100b\n"
+ " .long 14b,100b\n"
+ " .long 15b,100b\n"
+ " .long 16b,100b\n"
+ " .long 17b,100b\n"
+ " .long 18b,100b\n"
+ " .long 19b,100b\n"
+ " .long 20b,100b\n"
+ " .long 21b,100b\n"
+ " .long 22b,100b\n"
+ " .long 23b,100b\n"
+ " .long 24b,100b\n"
+ " .long 25b,100b\n"
+ " .long 26b,100b\n"
+ " .long 27b,100b\n"
+ " .long 28b,100b\n"
+ " .long 29b,100b\n"
+ " .long 30b,100b\n"
+ " .long 31b,100b\n"
+ " .long 32b,100b\n"
+ " .long 33b,100b\n"
+ " .long 34b,100b\n"
+ " .long 35b,100b\n"
+ " .long 36b,100b\n"
+ " .long 37b,100b\n"
+ " .long 99b,101b\n"
+ ".previous"
+ : "=&c"(size), "=&D" (d0), "=&S" (d1)
+ : "1"(to), "2"(from), "0"(size)
+ : "eax", "edx", "memory");
+ return size;
+}
+
+static unsigned long
+__copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size)
+{
+ int d0, d1;
+ __asm__ __volatile__(
+ " .align 2,0x90\n"
+ "0: movl 32(%4), %%eax\n"
+ " cmpl $67, %0\n"
+ " jbe 2f\n"
+ "1: movl 64(%4), %%eax\n"
+ " .align 2,0x90\n"
+ "2: movl 0(%4), %%eax\n"
+ "21: movl 4(%4), %%edx\n"
+ " movl %%eax, 0(%3)\n"
+ " movl %%edx, 4(%3)\n"
+ "3: movl 8(%4), %%eax\n"
+ "31: movl 12(%4),%%edx\n"
+ " movl %%eax, 8(%3)\n"
+ " movl %%edx, 12(%3)\n"
+ "4: movl 16(%4), %%eax\n"
+ "41: movl 20(%4), %%edx\n"
+ " movl %%eax, 16(%3)\n"
+ " movl %%edx, 20(%3)\n"
+ "10: movl 24(%4), %%eax\n"
+ "51: movl 28(%4), %%edx\n"
+ " movl %%eax, 24(%3)\n"
+ " movl %%edx, 28(%3)\n"
+ "11: movl 32(%4), %%eax\n"
+ "61: movl 36(%4), %%edx\n"
+ " movl %%eax, 32(%3)\n"
+ " movl %%edx, 36(%3)\n"
+ "12: movl 40(%4), %%eax\n"
+ "71: movl 44(%4), %%edx\n"
+ " movl %%eax, 40(%3)\n"
+ " movl %%edx, 44(%3)\n"
+ "13: movl 48(%4), %%eax\n"
+ "81: movl 52(%4), %%edx\n"
+ " movl %%eax, 48(%3)\n"
+ " movl %%edx, 52(%3)\n"
+ "14: movl 56(%4), %%eax\n"
+ "91: movl 60(%4), %%edx\n"
+ " movl %%eax, 56(%3)\n"
+ " movl %%edx, 60(%3)\n"
+ " addl $-64, %0\n"
+ " addl $64, %4\n"
+ " addl $64, %3\n"
+ " cmpl $63, %0\n"
+ " ja 0b\n"
+ "5: movl %0, %%eax\n"
+ " shrl $2, %0\n"
+ " andl $3, %%eax\n"
+ " cld\n"
+ "6: rep; movsl\n"
+ " movl %%eax,%0\n"
+ "7: rep; movsb\n"
+ "8:\n"
+ ".section .fixup,\"ax\"\n"
+ "9: lea 0(%%eax,%0,4),%0\n"
+ "16: pushl %0\n"
+ " pushl %%eax\n"
+ " xorl %%eax,%%eax\n"
+ " rep; stosb\n"
+ " popl %%eax\n"
+ " popl %0\n"
+ " jmp 8b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 0b,16b\n"
+ " .long 1b,16b\n"
+ " .long 2b,16b\n"
+ " .long 21b,16b\n"
+ " .long 3b,16b\n"
+ " .long 31b,16b\n"
+ " .long 4b,16b\n"
+ " .long 41b,16b\n"
+ " .long 10b,16b\n"
+ " .long 51b,16b\n"
+ " .long 11b,16b\n"
+ " .long 61b,16b\n"
+ " .long 12b,16b\n"
+ " .long 71b,16b\n"
+ " .long 13b,16b\n"
+ " .long 81b,16b\n"
+ " .long 14b,16b\n"
+ " .long 91b,16b\n"
+ " .long 6b,9b\n"
+ " .long 7b,16b\n"
+ ".previous"
+ : "=&c"(size), "=&D" (d0), "=&S" (d1)
+ : "1"(to), "2"(from), "0"(size)
+ : "eax", "edx", "memory");
+ return size;
+}
+#else
+/*
+ * Leave these declared but undefined. They should not be any references to
+ * them
+ */
+unsigned long
+__copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size);
+unsigned long
+__copy_user_intel(void __user *to, const void *from, unsigned long size);
+#endif /* CONFIG_X86_INTEL_USERCOPY */
+
+/* Generic arbitrary sized copy. */
+#define __copy_user(to,from,size) \
+do { \
+ int __d0, __d1, __d2; \
+ __asm__ __volatile__( \
+ " cmp $7,%0\n" \
+ " jbe 1f\n" \
+ " movl %1,%0\n" \
+ " negl %0\n" \
+ " andl $7,%0\n" \
+ " subl %0,%3\n" \
+ "4: rep; movsb\n" \
+ " movl %3,%0\n" \
+ " shrl $2,%0\n" \
+ " andl $3,%3\n" \
+ " .align 2,0x90\n" \
+ "0: rep; movsl\n" \
+ " movl %3,%0\n" \
+ "1: rep; movsb\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "5: addl %3,%0\n" \
+ " jmp 2b\n" \
+ "3: lea 0(%3,%0,4),%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 4b,5b\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,2b\n" \
+ ".previous" \
+ : "=&c"(size), "=&D" (__d0), "=&S" (__d1), "=r"(__d2) \
+ : "3"(size), "0"(size), "1"(to), "2"(from) \
+ : "memory"); \
+} while (0)
+
+#define __copy_user_zeroing(to,from,size) \
+do { \
+ int __d0, __d1, __d2; \
+ __asm__ __volatile__( \
+ " cmp $7,%0\n" \
+ " jbe 1f\n" \
+ " movl %1,%0\n" \
+ " negl %0\n" \
+ " andl $7,%0\n" \
+ " subl %0,%3\n" \
+ "4: rep; movsb\n" \
+ " movl %3,%0\n" \
+ " shrl $2,%0\n" \
+ " andl $3,%3\n" \
+ " .align 2,0x90\n" \
+ "0: rep; movsl\n" \
+ " movl %3,%0\n" \
+ "1: rep; movsb\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "5: addl %3,%0\n" \
+ " jmp 6f\n" \
+ "3: lea 0(%3,%0,4),%0\n" \
+ "6: pushl %0\n" \
+ " pushl %%eax\n" \
+ " xorl %%eax,%%eax\n" \
+ " rep; stosb\n" \
+ " popl %%eax\n" \
+ " popl %0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 4b,5b\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,6b\n" \
+ ".previous" \
+ : "=&c"(size), "=&D" (__d0), "=&S" (__d1), "=r"(__d2) \
+ : "3"(size), "0"(size), "1"(to), "2"(from) \
+ : "memory"); \
+} while (0)
+
+
+unsigned long __copy_to_user_ll(void __user *to, const void *from, unsigned long n)
+{
+ BUG_ON((long) n < 0);
+#ifndef CONFIG_X86_WP_WORKS_OK
+ if (unlikely(boot_cpu_data.wp_works_ok == 0) &&
+ ((unsigned long )to) < TASK_SIZE) {
+ /*
+ * CPU does not honor the WP bit when writing
+ * from supervisory mode, and due to preemption or SMP,
+ * the page tables can change at any time.
+ * Do it manually. Manfred <manfred@colorfullife.com>
+ */
+ while (n) {
+ unsigned long offset = ((unsigned long)to)%PAGE_SIZE;
+ unsigned long len = PAGE_SIZE - offset;
+ int retval;
+ struct page *pg;
+ void *maddr;
+
+ if (len > n)
+ len = n;
+
+survive:
+ down_read(¤t->mm->mmap_sem);
+ retval = get_user_pages(current, current->mm,
+ (unsigned long )to, 1, 1, 0, &pg, NULL);
+
+ if (retval == -ENOMEM && current->pid == 1) {
+ up_read(¤t->mm->mmap_sem);
+ blk_congestion_wait(WRITE, HZ/50);
+ goto survive;
+ }
+
+ if (retval != 1) {
+ up_read(¤t->mm->mmap_sem);
+ break;
+ }
+
+ maddr = kmap_atomic(pg, KM_USER0);
+ memcpy(maddr + offset, from, len);
+ kunmap_atomic(maddr, KM_USER0);
+ set_page_dirty_lock(pg);
+ put_page(pg);
+ up_read(¤t->mm->mmap_sem);
+
+ from += len;
+ to += len;
+ n -= len;
+ }
+ return n;
+ }
+#endif
+ if (movsl_is_ok(to, from, n))
+ __copy_user(to, from, n);
+ else
+ n = __copy_user_intel(to, from, n);
+ return n;
+}
+
+unsigned long
+__copy_from_user_ll(void *to, const void __user *from, unsigned long n)
+{
+ BUG_ON((long)n < 0);
+ if (movsl_is_ok(to, from, n))
+ __copy_user_zeroing(to, from, n);
+ else
+ n = __copy_user_zeroing_intel(to, from, n);
+ return n;
+}
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ might_sleep();
+ BUG_ON((long) n < 0);
+ if (access_ok(VERIFY_WRITE, to, n))
+ n = __copy_to_user(to, from, n);
+ return n;
+}
+EXPORT_SYMBOL(copy_to_user);
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ might_sleep();
+ BUG_ON((long) n < 0);
+ if (access_ok(VERIFY_READ, from, n))
+ n = __copy_from_user(to, from, n);
+ else
+ memset(to, 0, n);
+ return n;
+}
+EXPORT_SYMBOL(copy_from_user);
diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile
new file mode 100644
index 0000000..e95bb02
--- /dev/null
+++ b/arch/i386/mach-default/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := setup.o topology.o
diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
new file mode 100644
index 0000000..0aa08ea
--- /dev/null
+++ b/arch/i386/mach-default/setup.c
@@ -0,0 +1,106 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ apic_intr_init();
+#endif
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On VISWS
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void __init mca_nmi_hook(void)
+{
+ /* If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+
+ printk("NMI generated from unknown source!\n");
+}
+#endif
diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c
new file mode 100644
index 0000000..5b3e881
--- /dev/null
+++ b/arch/i386/mach-default/topology.c
@@ -0,0 +1,98 @@
+/*
+ * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
+#include <asm/cpu.h>
+
+static struct i386_cpu cpu_devices[NR_CPUS];
+
+int arch_register_cpu(int num){
+ struct node *parent = NULL;
+
+#ifdef CONFIG_NUMA
+ int node = cpu_to_node(num);
+ if (node_online(node))
+ parent = &node_devices[node].node;
+#endif /* CONFIG_NUMA */
+
+ return register_cpu(&cpu_devices[num].cpu, num, parent);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+void arch_unregister_cpu(int num) {
+ struct node *parent = NULL;
+
+#ifdef CONFIG_NUMA
+ int node = cpu_to_node(num);
+ if (node_online(node))
+ parent = &node_devices[node].node;
+#endif /* CONFIG_NUMA */
+
+ return unregister_cpu(&cpu_devices[num].cpu, parent);
+}
+EXPORT_SYMBOL(arch_register_cpu);
+EXPORT_SYMBOL(arch_unregister_cpu);
+#endif /*CONFIG_HOTPLUG_CPU*/
+
+
+
+#ifdef CONFIG_NUMA
+#include <linux/mmzone.h>
+#include <asm/node.h>
+
+struct i386_node node_devices[MAX_NUMNODES];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ if (node_online(i))
+ arch_register_node(i);
+ }
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ return 0;
+}
+
+#else /* !CONFIG_NUMA */
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ return 0;
+}
+
+#endif /* CONFIG_NUMA */
+
+subsys_initcall(topology_init);
diff --git a/arch/i386/mach-es7000/Makefile b/arch/i386/mach-es7000/Makefile
new file mode 100644
index 0000000..69dd4da
--- /dev/null
+++ b/arch/i386/mach-es7000/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-$(CONFIG_X86_ES7000) := es7000plat.o
+obj-$(CONFIG_X86_GENERICARCH) := es7000plat.o
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h
new file mode 100644
index 0000000..70691f0
--- /dev/null
+++ b/arch/i386/mach-es7000/es7000.h
@@ -0,0 +1,110 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ * Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#define MIP_REG 1
+#define MIP_PSAI_REG 4
+
+#define MIP_BUSY 1
+#define MIP_SPIN 0xf0000
+#define MIP_VALID 0x0100000000000000ULL
+#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
+
+#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
+
+struct mip_reg_info {
+ unsigned long long mip_info;
+ unsigned long long delivery_info;
+ unsigned long long host_reg;
+ unsigned long long mip_reg;
+};
+
+struct part_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char part_id;
+ unsigned char apic_mode;
+ unsigned long snum;
+ char ptype[16];
+ char sname[64];
+ char pname[64];
+};
+
+struct psai {
+ unsigned long long entry_type;
+ unsigned long long addr;
+ unsigned long long bep_addr;
+};
+
+struct es7000_mem_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char resv[6];
+ unsigned long long start;
+ unsigned long long size;
+};
+
+struct es7000_oem_table {
+ unsigned long long hdr;
+ struct mip_reg_info mip;
+ struct part_info pif;
+ struct es7000_mem_info shm;
+ struct psai psai;
+};
+
+struct acpi_table_sdt {
+ unsigned long pa;
+ unsigned long count;
+ struct {
+ unsigned long pa;
+ enum acpi_table_id id;
+ unsigned long size;
+ } entry[50];
+};
+
+struct oem_table {
+ struct acpi_table_header Header;
+ u32 OEMTableAddr;
+ u32 OEMTableSize;
+};
+
+struct mip_reg {
+ unsigned long long off_0;
+ unsigned long long off_8;
+ unsigned long long off_10;
+ unsigned long long off_18;
+ unsigned long long off_20;
+ unsigned long long off_28;
+ unsigned long long off_30;
+ unsigned long long off_38;
+};
+
+#define MIP_SW_APIC 0x1020b
+#define MIP_FUNC(VALUE) (VALUE & 0xff)
+
+extern int parse_unisys_oem (char *oemptr, int oem_entries);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length);
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+extern void es7000_sw_apic(void);
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c
new file mode 100644
index 0000000..d5936d5
--- /dev/null
+++ b/arch/i386/mach-es7000/es7000plat.c
@@ -0,0 +1,316 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ * Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/apicdef.h>
+#include "es7000.h"
+
+/*
+ * ES7000 Globals
+ */
+
+volatile unsigned long *psai = NULL;
+struct mip_reg *mip_reg;
+struct mip_reg *host_reg;
+int mip_port;
+unsigned long mip_addr, host_addr;
+
+#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+ if (!base) {
+ int i;
+ for (i = 0; i < nr_ioapics; i++)
+ base += nr_ioapic_registers[i];
+ }
+
+ if (!ioapic && (gsi < 16))
+ gsi += base;
+ return gsi;
+}
+
+#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)
+
+/*
+ * Parse the OEM Table
+ */
+
+int __init
+parse_unisys_oem (char *oemptr, int oem_entries)
+{
+ int i;
+ int success = 0;
+ unsigned char type, size;
+ unsigned long val;
+ char *tp = NULL;
+ struct psai *psaip = NULL;
+ struct mip_reg_info *mi;
+ struct mip_reg *host, *mip;
+
+ tp = oemptr;
+
+ tp += 8;
+
+ for (i=0; i <= oem_entries; i++) {
+ type = *tp++;
+ size = *tp++;
+ tp -= 2;
+ switch (type) {
+ case MIP_REG:
+ mi = (struct mip_reg_info *)tp;
+ val = MIP_RD_LO(mi->host_reg);
+ host_addr = val;
+ host = (struct mip_reg *)val;
+ host_reg = __va(host);
+ val = MIP_RD_LO(mi->mip_reg);
+ mip_port = MIP_PORT(mi->mip_info);
+ mip_addr = val;
+ mip = (struct mip_reg *)val;
+ mip_reg = __va(mip);
+ Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
+ (unsigned long)host_reg);
+ Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
+ (unsigned long)mip_reg);
+ success++;
+ break;
+ case MIP_PSAI_REG:
+ psaip = (struct psai *)tp;
+ if (tp != NULL) {
+ if (psaip->addr)
+ psai = __va(psaip->addr);
+ else
+ psai = NULL;
+ success++;
+ }
+ break;
+ default:
+ break;
+ }
+ if (i == 6) break;
+ tp += size;
+ }
+
+ if (success < 2) {
+ es7000_plat = 0;
+ } else {
+ printk("\nEnabling ES7000 specific features...\n");
+ /*
+ * Determine the generation of the ES7000 currently running.
+ *
+ * es7000_plat = 0 if the machine is NOT a Unisys ES7000 box
+ * es7000_plat = 1 if the machine is a 5xx ES7000 box
+ * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+ *
+ */
+ if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+ es7000_plat = 2;
+ else
+ es7000_plat = 1;
+
+ ioapic_renumber_irq = es7000_rename_gsi;
+ }
+ return es7000_plat;
+}
+
+int __init
+find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length)
+{
+ struct acpi_table_rsdp *rsdp = NULL;
+ unsigned long rsdp_phys = 0;
+ struct acpi_table_header *header = NULL;
+ int i;
+ struct acpi_table_sdt sdt;
+
+ rsdp_phys = acpi_find_rsdp();
+ rsdp = __va(rsdp_phys);
+ if (rsdp->rsdt_address) {
+ struct acpi_table_rsdt *mapped_rsdt = NULL;
+ sdt.pa = rsdp->rsdt_address;
+
+ header = (struct acpi_table_header *)
+ __acpi_map_table(sdt.pa, sizeof(struct acpi_table_header));
+ if (!header)
+ return -ENODEV;
+
+ sdt.count = (header->length - sizeof(struct acpi_table_header)) >> 3;
+ mapped_rsdt = (struct acpi_table_rsdt *)
+ __acpi_map_table(sdt.pa, header->length);
+ if (!mapped_rsdt)
+ return -ENODEV;
+
+ header = &mapped_rsdt->header;
+
+ for (i = 0; i < sdt.count; i++)
+ sdt.entry[i].pa = (unsigned long) mapped_rsdt->entry[i];
+ };
+ for (i = 0; i < sdt.count; i++) {
+
+ header = (struct acpi_table_header *)
+ __acpi_map_table(sdt.entry[i].pa,
+ sizeof(struct acpi_table_header));
+ if (!header)
+ continue;
+ if (!strncmp((char *) &header->signature, "OEM1", 4)) {
+ if (!strncmp((char *) &header->oem_id, "UNISYS", 6)) {
+ void *addr;
+ struct oem_table *t;
+ acpi_table_print(header, sdt.entry[i].pa);
+ t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length);
+ addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize);
+ *length = header->length;
+ *oem_addr = (unsigned long) addr;
+ return 0;
+ }
+ }
+ }
+ Dprintk("ES7000: did not find Unisys ACPI OEM table!\n");
+ return -1;
+}
+
+static void
+es7000_spin(int n)
+{
+ int i = 0;
+
+ while (i++ < n)
+ rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+ int status = 0;
+ int spin;
+
+ spin = MIP_SPIN;
+ while (((unsigned long long)host_reg->off_38 &
+ (unsigned long long)MIP_VALID) != 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+ outb(1, mip_port);
+
+ spin = MIP_SPIN;
+
+ while (((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)MIP_VALID) == 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ status = ((unsigned long long)mip_reg->off_0 &
+ (unsigned long long)0xffff0000000000ULL) >> 48;
+ mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)~MIP_VALID);
+ return status;
+}
+
+int
+es7000_start_cpu(int cpu, unsigned long eip)
+{
+ unsigned long vect = 0, psaival = 0;
+
+ if (psai == NULL)
+ return -1;
+
+ vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+ psaival = (0x1000000 | vect | cpu);
+
+ while (*psai & 0x1000000)
+ ;
+
+ *psai = psaival;
+
+ return 0;
+
+}
+
+int
+es7000_stop_cpu(int cpu)
+{
+ int startup;
+
+ if (psai == NULL)
+ return -1;
+
+ startup= (0x1000000 | cpu);
+
+ while ((*psai & 0xff00ffff) != startup)
+ ;
+
+ startup = (*psai & 0xff0000) >> 16;
+ *psai &= 0xffffff;
+
+ return 0;
+
+}
+
+void __init
+es7000_sw_apic()
+{
+ if (es7000_plat) {
+ int mip_status;
+ struct mip_reg es7000_mip_reg;
+
+ printk("ES7000: Enabling APIC mode.\n");
+ memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+ es7000_mip_reg.off_0 = MIP_SW_APIC;
+ es7000_mip_reg.off_38 = (MIP_VALID);
+ while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+ printk("es7000_sw_apic: command failed, status = %x\n",
+ mip_status);
+ return;
+ }
+}
diff --git a/arch/i386/mach-generic/Makefile b/arch/i386/mach-generic/Makefile
new file mode 100644
index 0000000..77fbc9f
--- /dev/null
+++ b/arch/i386/mach-generic/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the generic architecture
+#
+
+EXTRA_CFLAGS += -I../kernel
+
+obj-y := probe.o summit.o bigsmp.o es7000.o default.o ../mach-es7000/
diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/i386/mach-generic/bigsmp.c
new file mode 100644
index 0000000..25883b4
--- /dev/null
+++ b/arch/i386/mach-generic/bigsmp.c
@@ -0,0 +1,54 @@
+/*
+ * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
+ * Drives the local APIC in "clustered mode".
+ */
+#define APIC_DEFINITION 1
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <asm/mach-bigsmp/mach_apic.h>
+#include <asm/mach-bigsmp/mach_apicdef.h>
+#include <asm/mach-bigsmp/mach_ipi.h>
+#include <asm/mach-default/mach_mpparse.h>
+
+static int dmi_bigsmp; /* can be set by dmi scanners */
+
+static __init int hp_ht_bigsmp(struct dmi_system_id *d)
+{
+#ifdef CONFIG_X86_GENERICARCH
+ printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+ dmi_bigsmp = 1;
+#endif
+ return 0;
+}
+
+
+static struct dmi_system_id __initdata bigsmp_dmi_table[] = {
+ { hp_ht_bigsmp, "HP ProLiant DL760 G2", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
+ }},
+
+ { hp_ht_bigsmp, "HP ProLiant DL740", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+ }},
+ { }
+};
+
+
+static __init int probe_bigsmp(void)
+{
+ dmi_check_system(bigsmp_dmi_table);
+ return dmi_bigsmp;
+}
+
+struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp);
diff --git a/arch/i386/mach-generic/default.c b/arch/i386/mach-generic/default.c
new file mode 100644
index 0000000..7da14e9
--- /dev/null
+++ b/arch/i386/mach-generic/default.c
@@ -0,0 +1,27 @@
+/*
+ * Default generic APIC driver. This handles upto 8 CPUs.
+ */
+#define APIC_DEFINITION 1
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/mach-default/mach_apicdef.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/mach-default/mach_apic.h>
+#include <asm/mach-default/mach_ipi.h>
+#include <asm/mach-default/mach_mpparse.h>
+
+/* should be called last. */
+static __init int probe_default(void)
+{
+ return 1;
+}
+
+struct genapic apic_default = APIC_INIT("default", probe_default);
diff --git a/arch/i386/mach-generic/es7000.c b/arch/i386/mach-generic/es7000.c
new file mode 100644
index 0000000..48d3ec3
--- /dev/null
+++ b/arch/i386/mach-generic/es7000.c
@@ -0,0 +1,28 @@
+/*
+ * APIC driver for the Unisys ES7000 chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/mach-es7000/mach_apicdef.h>
+#include <asm/mach-es7000/mach_apic.h>
+#include <asm/mach-es7000/mach_ipi.h>
+#include <asm/mach-es7000/mach_mpparse.h>
+#include <asm/mach-es7000/mach_wakecpu.h>
+
+static __init int probe_es7000(void)
+{
+ /* probed later in mptable/ACPI hooks */
+ return 0;
+}
+
+struct genapic apic_es7000 = APIC_INIT("es7000", probe_es7000);
diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c
new file mode 100644
index 0000000..5497c65
--- /dev/null
+++ b/arch/i386/mach-generic/probe.c
@@ -0,0 +1,102 @@
+/* Copyright 2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic x86 APIC driver probe layer.
+ */
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/genapic.h>
+
+extern struct genapic apic_summit;
+extern struct genapic apic_bigsmp;
+extern struct genapic apic_es7000;
+extern struct genapic apic_default;
+
+struct genapic *genapic = &apic_default;
+
+struct genapic *apic_probe[] __initdata = {
+ &apic_summit,
+ &apic_bigsmp,
+ &apic_es7000,
+ &apic_default, /* must be last */
+ NULL,
+};
+
+void __init generic_apic_probe(char *command_line)
+{
+ char *s;
+ int i;
+ int changed = 0;
+
+ s = strstr(command_line, "apic=");
+ if (s && (s == command_line || isspace(s[-1]))) {
+ char *p = strchr(s, ' '), old;
+ if (!p)
+ p = strchr(s, '\0');
+ old = *p;
+ *p = 0;
+ for (i = 0; !changed && apic_probe[i]; i++) {
+ if (!strcmp(apic_probe[i]->name, s+5)) {
+ changed = 1;
+ genapic = apic_probe[i];
+ }
+ }
+ if (!changed)
+ printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
+ *p = old;
+ }
+ for (i = 0; !changed && apic_probe[i]; i++) {
+ if (apic_probe[i]->probe()) {
+ changed = 1;
+ genapic = apic_probe[i];
+ }
+ }
+ /* Not visible without early console */
+ if (!changed)
+ panic("Didn't find an APIC driver");
+
+ printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
+}
+
+/* These functions can switch the APIC even after the initial ->probe() */
+
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+{
+ int i;
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ int i;
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int hard_smp_processor_id(void)
+{
+ return genapic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID));
+}
diff --git a/arch/i386/mach-generic/summit.c b/arch/i386/mach-generic/summit.c
new file mode 100644
index 0000000..65ddf74
--- /dev/null
+++ b/arch/i386/mach-generic/summit.c
@@ -0,0 +1,27 @@
+/*
+ * APIC driver for the IBM "Summit" chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/mach-summit/mach_apic.h>
+#include <asm/mach-summit/mach_apicdef.h>
+#include <asm/mach-summit/mach_ipi.h>
+#include <asm/mach-summit/mach_mpparse.h>
+
+static __init int probe_summit(void)
+{
+ /* probed later in mptable/ACPI hooks */
+ return 0;
+}
+
+struct genapic apic_summit = APIC_INIT("summit", probe_summit);
diff --git a/arch/i386/mach-visws/Makefile b/arch/i386/mach-visws/Makefile
new file mode 100644
index 0000000..835fd96
--- /dev/null
+++ b/arch/i386/mach-visws/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := setup.o traps.o reboot.o
+
+obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
+obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o
diff --git a/arch/i386/mach-visws/mpparse.c b/arch/i386/mach-visws/mpparse.c
new file mode 100644
index 0000000..5a22082
--- /dev/null
+++ b/arch/i386/mach-visws/mpparse.c
@@ -0,0 +1,105 @@
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/smp.h>
+#include <asm/io.h>
+
+#include "cobalt.h"
+#include "mach_apic.h"
+
+/* Have we found an MP table */
+int smp_found_config;
+
+/*
+ * Various Linux-internal data structures created from the
+ * MP-table.
+ */
+int apic_version [MAX_APICS];
+
+int pic_mode;
+unsigned long mp_lapic_addr;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int boot_cpu_logical_apicid = -1U;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+unsigned int __initdata maxcpus = NR_CPUS;
+
+/*
+ * The Visual Workstation is Intel MP compliant in the hardware
+ * sense, but it doesn't have a BIOS(-configuration table).
+ * No problem for Linux.
+ */
+
+static void __init MP_processor_info (struct mpc_config_processor *m)
+{
+ int ver, logical_apicid;
+ physid_mask_t apic_cpus;
+
+ if (!(m->mpc_cpuflag & CPU_ENABLED))
+ return;
+
+ logical_apicid = m->mpc_apicid;
+ printk(KERN_INFO "%sCPU #%d %ld:%ld APIC version %d\n",
+ m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver);
+
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ boot_cpu_physical_apicid = m->mpc_apicid;
+ boot_cpu_logical_apicid = logical_apicid;
+ }
+
+ ver = m->mpc_apicver;
+ if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
+ printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
+ m->mpc_apicid, MAX_APICS);
+ return;
+ }
+
+ apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
+ /*
+ * Validate version
+ */
+ if (ver == 0x0) {
+ printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ m->mpc_apicid);
+ ver = 0x10;
+ }
+ apic_version[m->mpc_apicid] = ver;
+}
+
+void __init find_smp_config(void)
+{
+ struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
+ unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
+
+ if (ncpus > CO_CPU_MAX) {
+ printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
+ ncpus, mp);
+
+ ncpus = CO_CPU_MAX;
+ }
+
+ if (ncpus > maxcpus)
+ ncpus = maxcpus;
+
+ smp_found_config = 1;
+ while (ncpus--)
+ MP_processor_info(mp++);
+
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+}
+
+void __init get_smp_config (void)
+{
+}
diff --git a/arch/i386/mach-visws/reboot.c b/arch/i386/mach-visws/reboot.c
new file mode 100644
index 0000000..3a81e90
--- /dev/null
+++ b/arch/i386/mach-visws/reboot.c
@@ -0,0 +1,51 @@
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/platform.h>
+
+#include <asm/io.h>
+#include "piix4.h"
+
+void (*pm_power_off)(void);
+
+void machine_restart(char * __unused)
+{
+#ifdef CONFIG_SMP
+ smp_send_stop();
+#endif
+
+ /*
+ * Visual Workstations restart after this
+ * register is poked on the PIIX4
+ */
+ outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_power_off(void)
+{
+ unsigned short pm_status;
+ extern unsigned int pci_bus0;
+
+ while ((pm_status = inw(PMSTS_PORT)) & 0x100)
+ outw(pm_status, PMSTS_PORT);
+
+ outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+ mdelay(10);
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+ (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+ outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8);
+ outl(PIIX_SPECIAL_STOP, 0xCFC);
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+void machine_halt(void)
+{
+}
+
+EXPORT_SYMBOL(machine_halt);
diff --git a/arch/i386/mach-visws/setup.c b/arch/i386/mach-visws/setup.c
new file mode 100644
index 0000000..9f6d2d9b
--- /dev/null
+++ b/arch/i386/mach-visws/setup.c
@@ -0,0 +1,134 @@
+/*
+ * Unmaintained SGI Visual Workstation support.
+ * Split out from setup.c by davej@suse.de
+ */
+
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/fixmap.h>
+#include <asm/arch_hooks.h>
+#include <asm/io.h>
+#include "cobalt.h"
+#include "piix4.h"
+
+char visws_board_type = -1;
+char visws_board_rev = -1;
+
+void __init visws_get_board_type_and_rev(void)
+{
+ int raw;
+
+ visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
+ >> PIIX_GPI_BD_SHIFT;
+ /*
+ * Get Board rev.
+ * First, we have to initialize the 307 part to allow us access
+ * to the GPIO registers. Let's map them at 0x0fc0 which is right
+ * after the PIIX4 PM section.
+ */
+ outb_p(SIO_DEV_SEL, SIO_INDEX);
+ outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
+
+ outb_p(SIO_DEV_MSB, SIO_INDEX);
+ outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
+
+ outb_p(SIO_DEV_LSB, SIO_INDEX);
+ outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
+
+ outb_p(SIO_DEV_ENB, SIO_INDEX);
+ outb_p(1, SIO_DATA); /* Enable GPIO registers. */
+
+ /*
+ * Now, we have to map the power management section to write
+ * a bit which enables access to the GPIO registers.
+ * What lunatic came up with this shit?
+ */
+ outb_p(SIO_DEV_SEL, SIO_INDEX);
+ outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
+
+ outb_p(SIO_DEV_MSB, SIO_INDEX);
+ outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
+
+ outb_p(SIO_DEV_LSB, SIO_INDEX);
+ outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
+
+ outb_p(SIO_DEV_ENB, SIO_INDEX);
+ outb_p(1, SIO_DATA); /* Enable PM registers. */
+
+ /*
+ * Now, write the PM register which enables the GPIO registers.
+ */
+ outb_p(SIO_PM_FER2, SIO_PM_INDEX);
+ outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
+
+ /*
+ * Now, initialize the GPIO registers.
+ * We want them all to be inputs which is the
+ * power on default, so let's leave them alone.
+ * So, let's just read the board rev!
+ */
+ raw = inb_p(SIO_GP_DATA1);
+ raw &= 0x7f; /* 7 bits of valid board revision ID. */
+
+ if (visws_board_type == VISWS_320) {
+ if (raw < 0x6) {
+ visws_board_rev = 4;
+ } else if (raw < 0xc) {
+ visws_board_rev = 5;
+ } else {
+ visws_board_rev = 6;
+ }
+ } else if (visws_board_type == VISWS_540) {
+ visws_board_rev = 2;
+ } else {
+ visws_board_rev = raw;
+ }
+
+ printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
+ (visws_board_type == VISWS_320 ? "320" :
+ (visws_board_type == VISWS_540 ? "540" :
+ "unknown")), visws_board_rev);
+}
+
+void __init pre_intr_init_hook(void)
+{
+ init_VISWS_APIC_irqs();
+}
+
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ apic_intr_init();
+#endif
+}
+
+void __init pre_setup_arch_hook()
+{
+ visws_get_board_type_and_rev();
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "timer",
+};
+
+void __init time_init_hook(void)
+{
+ printk(KERN_INFO "Starting Cobalt Timer system clock\n");
+
+ /* Set the countdown value */
+ co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
+
+ /* Start the timer */
+ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
+
+ /* Enable (unmask) the timer interrupt */
+ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
+
+ /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */
+ setup_irq(0, &irq0);
+}
diff --git a/arch/i386/mach-visws/traps.c b/arch/i386/mach-visws/traps.c
new file mode 100644
index 0000000..9643539
--- /dev/null
+++ b/arch/i386/mach-visws/traps.c
@@ -0,0 +1,69 @@
+/* VISWS traps */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+#include <asm/apic.h>
+#include "cobalt.h"
+#include "lithium.h"
+
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+ set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+ set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+ if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+ panic("This machine is not SGI Visual Workstation 320/540");
+ }
+
+ if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+ panic("This machine is not SGI Visual Workstation 320/540");
+ }
+
+ li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+ li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+ /*
+ * On normal SMP PC this is used only with SMP, but we have to
+ * use it and set it up here to start the Cobalt clock
+ */
+ set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+ setup_local_APIC();
+ printk(KERN_INFO "Local APIC Version %#lx, ID %#lx\n",
+ apic_read(APIC_LVR), apic_read(APIC_ID));
+
+ set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+ set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+ printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+ co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+ /* Enable Cobalt APIC being careful to NOT change the ID! */
+ co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+ printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+ co_apic_read(CO_APIC_ID));
+}
+
+void __init trap_init_hook(void)
+{
+ lithium_init();
+ cobalt_init();
+}
diff --git a/arch/i386/mach-visws/visws_apic.c b/arch/i386/mach-visws/visws_apic.c
new file mode 100644
index 0000000..04e6585
--- /dev/null
+++ b/arch/i386/mach-visws/visws_apic.c
@@ -0,0 +1,303 @@
+/*
+ * linux/arch/i386/mach_visws/visws_apic.c
+ *
+ * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ * SGI Visual Workstation interrupt controller
+ *
+ * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ * which serves as the main interrupt controller in the system. Non-legacy
+ * hardware in the system uses this controller directly. Legacy devices
+ * are connected to the PIIX4 which in turn has its 8259(s) connected to
+ * a of the Cobalt APIC entry.
+ *
+ * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+#include "cobalt.h"
+#include "irq_vectors.h"
+
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+ co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+ extern char visws_board_type;
+ extern char visws_board_rev;
+
+ if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+ return 5;
+ return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+ if (IS_CO_APIC(irq))
+ return CO_APIC(irq);
+
+ switch (irq) {
+ case 0: return CO_APIC_CPU;
+ case CO_IRQ_IDE0: return co_apic_ide0_hack();
+ case CO_IRQ_IDE1: return CO_APIC_IDE1;
+ default: return -1;
+ }
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+
+static void enable_cobalt_irq(unsigned int irq)
+{
+ co_apic_set(is_co_apic(irq), irq);
+}
+
+static void disable_cobalt_irq(unsigned int irq)
+{
+ int entry = is_co_apic(irq);
+
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+ co_apic_read(CO_APIC_LO(entry));
+}
+
+/*
+ * "irq" really just serves to identify the device. Here is where we
+ * map this to the Cobalt APIC entry where it's physically wired.
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
+ */
+static unsigned int startup_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+ irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+ return 0;
+}
+
+static void ack_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ disable_cobalt_irq(irq);
+ apic_write(APIC_EOI, APIC_EIO_ACK);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static void end_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct hw_interrupt_type cobalt_irq_type = {
+ .typename = "Cobalt-APIC",
+ .startup = startup_cobalt_irq,
+ .shutdown = disable_cobalt_irq,
+ .enable = enable_cobalt_irq,
+ .disable = disable_cobalt_irq,
+ .ack = ack_cobalt_irq,
+ .end = end_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(unsigned int irq)
+{
+ init_8259A(0);
+
+ return startup_cobalt_irq(irq);
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct hw_interrupt_type piix4_master_irq_type = {
+ .typename = "PIIX4-master",
+ .startup = startup_piix4_master_irq,
+ .ack = ack_cobalt_irq,
+ .end = end_piix4_master_irq,
+};
+
+
+static struct hw_interrupt_type piix4_virtual_irq_type = {
+ .typename = "PIIX4-virtual",
+ .startup = startup_8259A_irq,
+ .shutdown = disable_8259A_irq,
+ .enable = enable_8259A_irq,
+ .disable = disable_8259A_irq,
+};
+
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id, struct pt_regs * regs)
+{
+ int realirq;
+ irq_desc_t *desc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ /* Find out what's interrupting in the PIIX4 master 8259 */
+ outb(0x0c, 0x20); /* OCW3 Poll command */
+ realirq = inb(0x20);
+
+ /*
+ * Bit 7 == 0 means invalid/spurious
+ */
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq &= 7;
+
+ if (unlikely(realirq == 2)) {
+ outb(0x0c, 0xa0);
+ realirq = inb(0xa0);
+
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq = (realirq & 7) + 8;
+ }
+
+ /* mask and ack interrupt */
+ cached_irq_mask |= 1 << realirq;
+ if (unlikely(realirq > 7)) {
+ inb(0xa1);
+ outb(cached_slave_mask, 0xa1);
+ outb(0x60 + (realirq & 7), 0xa0);
+ outb(0x60 + 2, 0x20);
+ } else {
+ inb(0x21);
+ outb(cached_master_mask, 0x21);
+ outb(0x60 + realirq, 0x20);
+ }
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ desc = irq_desc + realirq;
+
+ /*
+ * handle this 'virtual interrupt' as a Cobalt one now.
+ */
+ kstat_cpu(smp_processor_id()).irqs[realirq]++;
+
+ if (likely(desc->action != NULL))
+ handle_IRQ_event(realirq, regs, desc->action);
+
+ if (!(desc->status & IRQ_DISABLED))
+ enable_8259A_irq(realirq);
+
+ return IRQ_HANDLED;
+
+out_unlock:
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+ return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+ .handler = piix4_master_intr,
+ .name = "PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+
+void init_VISWS_APIC_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+
+ if (i == 0) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_IDE0) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_IDE1) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_8259) {
+ irq_desc[i].handler = &piix4_master_irq_type;
+ }
+ else if (i < CO_IRQ_APIC0) {
+ irq_desc[i].handler = &piix4_virtual_irq_type;
+ }
+ else if (IS_CO_APIC(i)) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ }
+
+ setup_irq(CO_IRQ_8259, &master_action);
+ setup_irq(2, &cascade_action);
+}
diff --git a/arch/i386/mach-voyager/Makefile b/arch/i386/mach-voyager/Makefile
new file mode 100644
index 0000000..f24d296
--- /dev/null
+++ b/arch/i386/mach-voyager/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+EXTRA_CFLAGS += -I../kernel
+obj-y := setup.o voyager_basic.o voyager_thread.o
+
+obj-$(CONFIG_SMP) += voyager_smp.o voyager_cat.o
diff --git a/arch/i386/mach-voyager/setup.c b/arch/i386/mach-voyager/setup.c
new file mode 100644
index 0000000..df123fc
--- /dev/null
+++ b/arch/i386/mach-voyager/setup.c
@@ -0,0 +1,48 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+
+void __init pre_intr_init_hook(void)
+{
+ init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_SMP
+ smp_intr_init();
+#endif
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+}
+
+void __init pre_setup_arch_hook(void)
+{
+ /* Voyagers run their CPUs from independent clocks, so disable
+ * the TSC code because we can't sync them */
+ tsc_disable = 1;
+}
+
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+
+void __init time_init_hook(void)
+{
+ setup_irq(0, &irq0);
+}
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
new file mode 100644
index 0000000..602aea2
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -0,0 +1,325 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager.c
+ *
+ * This file contains all the voyager specific routines for getting
+ * initialisation of the architecture to function. For additional
+ * features see:
+ *
+ * voyager_cat.c - Voyager CAT bus interface
+ * voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/sysrq.h>
+#include <asm/io.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <linux/pm.h>
+#include <linux/irq.h>
+#include <asm/tlbflush.h>
+#include <asm/arch_hooks.h>
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void);
+
+int voyager_level = 0;
+
+struct voyager_SUS *voyager_SUS = NULL;
+
+#ifdef CONFIG_SMP
+static void
+voyager_dump(int dummy1, struct pt_regs *dummy2, struct tty_struct *dummy3)
+{
+ /* get here via a sysrq */
+ voyager_smp_dump();
+}
+
+static struct sysrq_key_op sysrq_voyager_dump_op = {
+ .handler = voyager_dump,
+ .help_msg = "Voyager",
+ .action_msg = "Dump Voyager Status",
+};
+#endif
+
+void
+voyager_detect(struct voyager_bios_info *bios)
+{
+ if(bios->len != 0xff) {
+ int class = (bios->class_1 << 8)
+ | (bios->class_2 & 0xff);
+
+ printk("Voyager System detected.\n"
+ " Class %x, Revision %d.%d\n",
+ class, bios->major, bios->minor);
+ if(class == VOYAGER_LEVEL4)
+ voyager_level = 4;
+ else if(class < VOYAGER_LEVEL5_AND_ABOVE)
+ voyager_level = 3;
+ else
+ voyager_level = 5;
+ printk(" Architecture Level %d\n", voyager_level);
+ if(voyager_level < 4)
+ printk("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
+ /* install the power off handler */
+ pm_power_off = voyager_power_off;
+#ifdef CONFIG_SMP
+ register_sysrq_key('v', &sysrq_voyager_dump_op);
+#endif
+ } else {
+ printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
+ }
+}
+
+void
+voyager_system_interrupt(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ printk("Voyager: detected system interrupt\n");
+}
+
+/* Routine to read information from the extended CMOS area */
+__u8
+voyager_extended_cmos_read(__u16 addr)
+{
+ outb(addr & 0xff, 0x74);
+ outb((addr >> 8) & 0xff, 0x75);
+ return inb(0x76);
+}
+
+/* internal definitions for the SUS Click Map of memory */
+
+#define CLICK_ENTRIES 16
+#define CLICK_SIZE 4096 /* click to byte conversion for Length */
+
+typedef struct ClickMap {
+ struct Entry {
+ __u32 Address;
+ __u32 Length;
+ } Entry[CLICK_ENTRIES];
+} ClickMap_t;
+
+
+/* This routine is pretty much an awful hack to read the bios clickmap by
+ * mapping it into page 0. There are usually three regions in the map:
+ * Base Memory
+ * Extended Memory
+ * zero length marker for end of map
+ *
+ * Returns are 0 for failure and 1 for success on extracting region.
+ */
+int __init
+voyager_memory_detect(int region, __u32 *start, __u32 *length)
+{
+ int i;
+ int retval = 0;
+ __u8 cmos[4];
+ ClickMap_t *map;
+ unsigned long map_addr;
+ unsigned long old;
+
+ if(region >= CLICK_ENTRIES) {
+ printk("Voyager: Illegal ClickMap region %d\n", region);
+ return 0;
+ }
+
+ for(i = 0; i < sizeof(cmos); i++)
+ cmos[i] = voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
+
+ map_addr = *(unsigned long *)cmos;
+
+ /* steal page 0 for this */
+ old = pg0[0];
+ pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
+ local_flush_tlb();
+ /* now clear everything out but page 0 */
+ map = (ClickMap_t *)(map_addr & (~PAGE_MASK));
+
+ /* zero length is the end of the clickmap */
+ if(map->Entry[region].Length != 0) {
+ *length = map->Entry[region].Length * CLICK_SIZE;
+ *start = map->Entry[region].Address;
+ retval = 1;
+ }
+
+ /* replace the mapping */
+ pg0[0] = old;
+ local_flush_tlb();
+ return retval;
+}
+
+/* voyager specific handling code for timer interrupts. Used to hand
+ * off the timer tick to the SMP code, since the VIC doesn't have an
+ * internal timer (The QIC does, but that's another story). */
+void
+voyager_timer_interrupt(struct pt_regs *regs)
+{
+ if((jiffies & 0x3ff) == 0) {
+
+ /* There seems to be something flaky in either
+ * hardware or software that is resetting the timer 0
+ * count to something much higher than it should be
+ * This seems to occur in the boot sequence, just
+ * before root is mounted. Therefore, every 10
+ * seconds or so, we sanity check the timer zero count
+ * and kick it back to where it should be.
+ *
+ * FIXME: This is the most awful hack yet seen. I
+ * should work out exactly what is interfering with
+ * the timer count settings early in the boot sequence
+ * and swiftly introduce it to something sharp and
+ * pointy. */
+ __u16 val;
+ extern spinlock_t i8253_lock;
+
+ spin_lock(&i8253_lock);
+
+ outb_p(0x00, 0x43);
+ val = inb_p(0x40);
+ val |= inb(0x40) << 8;
+ spin_unlock(&i8253_lock);
+
+ if(val > LATCH) {
+ printk("\nVOYAGER: countdown timer value too high (%d), resetting\n\n", val);
+ spin_lock(&i8253_lock);
+ outb(0x34,0x43);
+ outb_p(LATCH & 0xff , 0x40); /* LSB */
+ outb(LATCH >> 8 , 0x40); /* MSB */
+ spin_unlock(&i8253_lock);
+ }
+ }
+#ifdef CONFIG_SMP
+ smp_vic_timer_interrupt(regs);
+#endif
+}
+
+void
+voyager_power_off(void)
+{
+ printk("VOYAGER Power Off\n");
+
+ if(voyager_level == 5) {
+ voyager_cat_power_off();
+ } else if(voyager_level == 4) {
+ /* This doesn't apparently work on most L4 machines,
+ * but the specs say to do this to get automatic power
+ * off. Unfortunately, if it doesn't power off the
+ * machine, it ends up doing a cold restart, which
+ * isn't really intended, so comment out the code */
+#if 0
+ int port;
+
+
+ /* enable the voyager Configuration Space */
+ outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8,
+ VOYAGER_MC_SETUP);
+ /* the port for the power off flag is an offset from the
+ floating base */
+ port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
+ /* set the power off flag */
+ outb(inb(port) | 0x1, port);
+#endif
+ }
+ /* and wait for it to happen */
+ for(;;) {
+ __asm("cli");
+ __asm("hlt");
+ }
+}
+
+/* copied from process.c */
+static inline void
+kb_wait(void)
+{
+ int i;
+
+ for (i=0; i<0x10000; i++)
+ if ((inb_p(0x64) & 0x02) == 0)
+ break;
+}
+
+void
+machine_restart(char *cmd)
+{
+ printk("Voyager Warm Restart\n");
+ kb_wait();
+
+ if(voyager_level == 5) {
+ /* write magic values to the RTC to inform system that
+ * shutdown is beginning */
+ outb(0x8f, 0x70);
+ outb(0x5 , 0x71);
+
+ udelay(50);
+ outb(0xfe,0x64); /* pull reset low */
+ } else if(voyager_level == 4) {
+ __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
+ __u8 basebd = inb(VOYAGER_MC_SETUP);
+
+ outb(basebd | 0x08, VOYAGER_MC_SETUP);
+ outb(0x02, catbase + 0x21);
+ }
+ for(;;) {
+ asm("cli");
+ asm("hlt");
+ }
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void
+mca_nmi_hook(void)
+{
+ __u8 dumpval __attribute__((unused)) = inb(0xf823);
+ __u8 swnmi __attribute__((unused)) = inb(0xf813);
+
+ /* FIXME: assume dump switch pressed */
+ /* check to see if the dump switch was pressed */
+ VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
+ /* clear swnmi */
+ outb(0xff, 0xf813);
+ /* tell SUS to ignore dump */
+ if(voyager_level == 5 && voyager_SUS != NULL) {
+ if(voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
+ voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
+ voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
+ udelay(1000);
+ voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
+ voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
+ }
+ }
+ printk(KERN_ERR "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n", smp_processor_id());
+ show_stack(NULL, NULL);
+ show_state();
+}
+
+
+
+void
+machine_halt(void)
+{
+ /* treat a halt like a power off */
+ machine_power_off();
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+}
+
+EXPORT_SYMBOL(machine_power_off);
diff --git a/arch/i386/mach-voyager/voyager_cat.c b/arch/i386/mach-voyager/voyager_cat.c
new file mode 100644
index 0000000..23967fe
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_cat.c
@@ -0,0 +1,1178 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager_cat.c
+ *
+ * This file contains all the logic for manipulating the CAT bus
+ * in a level 5 machine.
+ *
+ * The CAT bus is a serial configuration and test bus. Its primary
+ * uses are to probe the initial configuration of the system and to
+ * diagnose error conditions when a system interrupt occurs. The low
+ * level interface is fairly primitive, so most of this file consists
+ * of bit shift manipulations to send and receive packets on the
+ * serial bus */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#ifdef VOYAGER_CAT_DEBUG
+#define CDEBUG(x) printk x
+#else
+#define CDEBUG(x)
+#endif
+
+/* the CAT command port */
+#define CAT_CMD (sspb + 0xe)
+/* the CAT data port */
+#define CAT_DATA (sspb + 0xd)
+
+/* the internal cat functions */
+static void cat_pack(__u8 *msg, __u16 start_bit, __u8 *data,
+ __u16 num_bits);
+static void cat_unpack(__u8 *msg, __u16 start_bit, __u8 *data,
+ __u16 num_bits);
+static void cat_build_header(__u8 *header, const __u16 len,
+ const __u16 smallest_reg_bits,
+ const __u16 longest_reg_bits);
+static int cat_sendinst(voyager_module_t *modp, voyager_asic_t *asicp,
+ __u8 reg, __u8 op);
+static int cat_getdata(voyager_module_t *modp, voyager_asic_t *asicp,
+ __u8 reg, __u8 *value);
+static int cat_shiftout(__u8 *data, __u16 data_bytes, __u16 header_bytes,
+ __u8 pad_bits);
+static int cat_write(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg,
+ __u8 value);
+static int cat_read(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg,
+ __u8 *value);
+static int cat_subread(voyager_module_t *modp, voyager_asic_t *asicp,
+ __u16 offset, __u16 len, void *buf);
+static int cat_senddata(voyager_module_t *modp, voyager_asic_t *asicp,
+ __u8 reg, __u8 value);
+static int cat_disconnect(voyager_module_t *modp, voyager_asic_t *asicp);
+static int cat_connect(voyager_module_t *modp, voyager_asic_t *asicp);
+
+static inline const char *
+cat_module_name(int module_id)
+{
+ switch(module_id) {
+ case 0x10:
+ return "Processor Slot 0";
+ case 0x11:
+ return "Processor Slot 1";
+ case 0x12:
+ return "Processor Slot 2";
+ case 0x13:
+ return "Processor Slot 4";
+ case 0x14:
+ return "Memory Slot 0";
+ case 0x15:
+ return "Memory Slot 1";
+ case 0x18:
+ return "Primary Microchannel";
+ case 0x19:
+ return "Secondary Microchannel";
+ case 0x1a:
+ return "Power Supply Interface";
+ case 0x1c:
+ return "Processor Slot 5";
+ case 0x1d:
+ return "Processor Slot 6";
+ case 0x1e:
+ return "Processor Slot 7";
+ case 0x1f:
+ return "Processor Slot 8";
+ default:
+ return "Unknown Module";
+ }
+}
+
+static int sspb = 0; /* stores the super port location */
+int voyager_8slot = 0; /* set to true if a 51xx monster */
+
+voyager_module_t *voyager_cat_list;
+
+/* the I/O port assignments for the VIC and QIC */
+static struct resource vic_res = {
+ "Voyager Interrupt Controller", 0xFC00, 0xFC6F };
+static struct resource qic_res = {
+ "Quad Interrupt Controller", 0xFC70, 0xFCFF };
+
+/* This function is used to pack a data bit stream inside a message.
+ * It writes num_bits of the data buffer in msg starting at start_bit.
+ * Note: This function assumes that any unused bit in the data stream
+ * is set to zero so that the ors will work correctly */
+#define BITS_PER_BYTE 8
+static void
+cat_pack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits)
+{
+ /* compute initial shift needed */
+ const __u16 offset = start_bit % BITS_PER_BYTE;
+ __u16 len = num_bits / BITS_PER_BYTE;
+ __u16 byte = start_bit / BITS_PER_BYTE;
+ __u16 residue = (num_bits % BITS_PER_BYTE) + offset;
+ int i;
+
+ /* adjust if we have more than a byte of residue */
+ if(residue >= BITS_PER_BYTE) {
+ residue -= BITS_PER_BYTE;
+ len++;
+ }
+
+ /* clear out the bits. We assume here that if len==0 then
+ * residue >= offset. This is always true for the catbus
+ * operations */
+ msg[byte] &= 0xff << (BITS_PER_BYTE - offset);
+ msg[byte++] |= data[0] >> offset;
+ if(len == 0)
+ return;
+ for(i = 1; i < len; i++)
+ msg[byte++] = (data[i-1] << (BITS_PER_BYTE - offset))
+ | (data[i] >> offset);
+ if(residue != 0) {
+ __u8 mask = 0xff >> residue;
+ __u8 last_byte = data[i-1] << (BITS_PER_BYTE - offset)
+ | (data[i] >> offset);
+
+ last_byte &= ~mask;
+ msg[byte] &= mask;
+ msg[byte] |= last_byte;
+ }
+ return;
+}
+/* unpack the data again (same arguments as cat_pack()). data buffer
+ * must be zero populated.
+ *
+ * Function: given a message string move to start_bit and copy num_bits into
+ * data (starting at bit 0 in data).
+ */
+static void
+cat_unpack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits)
+{
+ /* compute initial shift needed */
+ const __u16 offset = start_bit % BITS_PER_BYTE;
+ __u16 len = num_bits / BITS_PER_BYTE;
+ const __u8 last_bits = num_bits % BITS_PER_BYTE;
+ __u16 byte = start_bit / BITS_PER_BYTE;
+ int i;
+
+ if(last_bits != 0)
+ len++;
+
+ /* special case: want < 8 bits from msg and we can get it from
+ * a single byte of the msg */
+ if(len == 0 && BITS_PER_BYTE - offset >= num_bits) {
+ data[0] = msg[byte] << offset;
+ data[0] &= 0xff >> (BITS_PER_BYTE - num_bits);
+ return;
+ }
+ for(i = 0; i < len; i++) {
+ /* this annoying if has to be done just in case a read of
+ * msg one beyond the array causes a panic */
+ if(offset != 0) {
+ data[i] = msg[byte++] << offset;
+ data[i] |= msg[byte] >> (BITS_PER_BYTE - offset);
+ }
+ else {
+ data[i] = msg[byte++];
+ }
+ }
+ /* do we need to truncate the final byte */
+ if(last_bits != 0) {
+ data[i-1] &= 0xff << (BITS_PER_BYTE - last_bits);
+ }
+ return;
+}
+
+static void
+cat_build_header(__u8 *header, const __u16 len, const __u16 smallest_reg_bits,
+ const __u16 longest_reg_bits)
+{
+ int i;
+ __u16 start_bit = (smallest_reg_bits - 1) % BITS_PER_BYTE;
+ __u8 *last_byte = &header[len - 1];
+
+ if(start_bit == 0)
+ start_bit = 1; /* must have at least one bit in the hdr */
+
+ for(i=0; i < len; i++)
+ header[i] = 0;
+
+ for(i = start_bit; i > 0; i--)
+ *last_byte = ((*last_byte) << 1) + 1;
+
+}
+
+static int
+cat_sendinst(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg, __u8 op)
+{
+ __u8 parity, inst, inst_buf[4] = { 0 };
+ __u8 iseq[VOYAGER_MAX_SCAN_PATH], hseq[VOYAGER_MAX_REG_SIZE];
+ __u16 ibytes, hbytes, padbits;
+ int i;
+
+ /*
+ * Parity is the parity of the register number + 1 (READ_REGISTER
+ * and WRITE_REGISTER always add '1' to the number of bits == 1)
+ */
+ parity = (__u8)(1 + (reg & 0x01) +
+ ((__u8)(reg & 0x02) >> 1) +
+ ((__u8)(reg & 0x04) >> 2) +
+ ((__u8)(reg & 0x08) >> 3)) % 2;
+
+ inst = ((parity << 7) | (reg << 2) | op);
+
+ outb(VOYAGER_CAT_IRCYC, CAT_CMD);
+ if(!modp->scan_path_connected) {
+ if(asicp->asic_id != VOYAGER_CAT_ID) {
+ printk("**WARNING***: cat_sendinst has disconnected scan path not to CAT asic\n");
+ return 1;
+ }
+ outb(VOYAGER_CAT_HEADER, CAT_DATA);
+ outb(inst, CAT_DATA);
+ if(inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
+ CDEBUG(("VOYAGER CAT: cat_sendinst failed to get CAT_HEADER\n"));
+ return 1;
+ }
+ return 0;
+ }
+ ibytes = modp->inst_bits / BITS_PER_BYTE;
+ if((padbits = modp->inst_bits % BITS_PER_BYTE) != 0) {
+ padbits = BITS_PER_BYTE - padbits;
+ ibytes++;
+ }
+ hbytes = modp->largest_reg / BITS_PER_BYTE;
+ if(modp->largest_reg % BITS_PER_BYTE)
+ hbytes++;
+ CDEBUG(("cat_sendinst: ibytes=%d, hbytes=%d\n", ibytes, hbytes));
+ /* initialise the instruction sequence to 0xff */
+ for(i=0; i < ibytes + hbytes; i++)
+ iseq[i] = 0xff;
+ cat_build_header(hseq, hbytes, modp->smallest_reg, modp->largest_reg);
+ cat_pack(iseq, modp->inst_bits, hseq, hbytes * BITS_PER_BYTE);
+ inst_buf[0] = inst;
+ inst_buf[1] = 0xFF >> (modp->largest_reg % BITS_PER_BYTE);
+ cat_pack(iseq, asicp->bit_location, inst_buf, asicp->ireg_length);
+#ifdef VOYAGER_CAT_DEBUG
+ printk("ins = 0x%x, iseq: ", inst);
+ for(i=0; i< ibytes + hbytes; i++)
+ printk("0x%x ", iseq[i]);
+ printk("\n");
+#endif
+ if(cat_shiftout(iseq, ibytes, hbytes, padbits)) {
+ CDEBUG(("VOYAGER CAT: cat_sendinst: cat_shiftout failed\n"));
+ return 1;
+ }
+ CDEBUG(("CAT SHIFTOUT DONE\n"));
+ return 0;
+}
+
+static int
+cat_getdata(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg,
+ __u8 *value)
+{
+ if(!modp->scan_path_connected) {
+ if(asicp->asic_id != VOYAGER_CAT_ID) {
+ CDEBUG(("VOYAGER CAT: ERROR: cat_getdata to CAT asic with scan path connected\n"));
+ return 1;
+ }
+ if(reg > VOYAGER_SUBADDRHI)
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ outb(VOYAGER_CAT_DRCYC, CAT_CMD);
+ outb(VOYAGER_CAT_HEADER, CAT_DATA);
+ *value = inb(CAT_DATA);
+ outb(0xAA, CAT_DATA);
+ if(inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
+ CDEBUG(("cat_getdata: failed to get VOYAGER_CAT_HEADER\n"));
+ return 1;
+ }
+ return 0;
+ }
+ else {
+ __u16 sbits = modp->num_asics -1 + asicp->ireg_length;
+ __u16 sbytes = sbits / BITS_PER_BYTE;
+ __u16 tbytes;
+ __u8 string[VOYAGER_MAX_SCAN_PATH], trailer[VOYAGER_MAX_REG_SIZE];
+ __u8 padbits;
+ int i;
+
+ outb(VOYAGER_CAT_DRCYC, CAT_CMD);
+
+ if((padbits = sbits % BITS_PER_BYTE) != 0) {
+ padbits = BITS_PER_BYTE - padbits;
+ sbytes++;
+ }
+ tbytes = asicp->ireg_length / BITS_PER_BYTE;
+ if(asicp->ireg_length % BITS_PER_BYTE)
+ tbytes++;
+ CDEBUG(("cat_getdata: tbytes = %d, sbytes = %d, padbits = %d\n",
+ tbytes, sbytes, padbits));
+ cat_build_header(trailer, tbytes, 1, asicp->ireg_length);
+
+
+ for(i = tbytes - 1; i >= 0; i--) {
+ outb(trailer[i], CAT_DATA);
+ string[sbytes + i] = inb(CAT_DATA);
+ }
+
+ for(i = sbytes - 1; i >= 0; i--) {
+ outb(0xaa, CAT_DATA);
+ string[i] = inb(CAT_DATA);
+ }
+ *value = 0;
+ cat_unpack(string, padbits + (tbytes * BITS_PER_BYTE) + asicp->asic_location, value, asicp->ireg_length);
+#ifdef VOYAGER_CAT_DEBUG
+ printk("value=0x%x, string: ", *value);
+ for(i=0; i< tbytes+sbytes; i++)
+ printk("0x%x ", string[i]);
+ printk("\n");
+#endif
+
+ /* sanity check the rest of the return */
+ for(i=0; i < tbytes; i++) {
+ __u8 input = 0;
+
+ cat_unpack(string, padbits + (i * BITS_PER_BYTE), &input, BITS_PER_BYTE);
+ if(trailer[i] != input) {
+ CDEBUG(("cat_getdata: failed to sanity check rest of ret(%d) 0x%x != 0x%x\n", i, input, trailer[i]));
+ return 1;
+ }
+ }
+ CDEBUG(("cat_getdata DONE\n"));
+ return 0;
+ }
+}
+
+static int
+cat_shiftout(__u8 *data, __u16 data_bytes, __u16 header_bytes, __u8 pad_bits)
+{
+ int i;
+
+ for(i = data_bytes + header_bytes - 1; i >= header_bytes; i--)
+ outb(data[i], CAT_DATA);
+
+ for(i = header_bytes - 1; i >= 0; i--) {
+ __u8 header = 0;
+ __u8 input;
+
+ outb(data[i], CAT_DATA);
+ input = inb(CAT_DATA);
+ CDEBUG(("cat_shiftout: returned 0x%x\n", input));
+ cat_unpack(data, ((data_bytes + i) * BITS_PER_BYTE) - pad_bits,
+ &header, BITS_PER_BYTE);
+ if(input != header) {
+ CDEBUG(("VOYAGER CAT: cat_shiftout failed to return header 0x%x != 0x%x\n", input, header));
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int
+cat_senddata(voyager_module_t *modp, voyager_asic_t *asicp,
+ __u8 reg, __u8 value)
+{
+ outb(VOYAGER_CAT_DRCYC, CAT_CMD);
+ if(!modp->scan_path_connected) {
+ if(asicp->asic_id != VOYAGER_CAT_ID) {
+ CDEBUG(("VOYAGER CAT: ERROR: scan path disconnected when asic != CAT\n"));
+ return 1;
+ }
+ outb(VOYAGER_CAT_HEADER, CAT_DATA);
+ outb(value, CAT_DATA);
+ if(inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
+ CDEBUG(("cat_senddata: failed to get correct header response to sent data\n"));
+ return 1;
+ }
+ if(reg > VOYAGER_SUBADDRHI) {
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ }
+
+ return 0;
+ }
+ else {
+ __u16 hbytes = asicp->ireg_length / BITS_PER_BYTE;
+ __u16 dbytes = (modp->num_asics - 1 + asicp->ireg_length)/BITS_PER_BYTE;
+ __u8 padbits, dseq[VOYAGER_MAX_SCAN_PATH],
+ hseq[VOYAGER_MAX_REG_SIZE];
+ int i;
+
+ if((padbits = (modp->num_asics - 1
+ + asicp->ireg_length) % BITS_PER_BYTE) != 0) {
+ padbits = BITS_PER_BYTE - padbits;
+ dbytes++;
+ }
+ if(asicp->ireg_length % BITS_PER_BYTE)
+ hbytes++;
+
+ cat_build_header(hseq, hbytes, 1, asicp->ireg_length);
+
+ for(i = 0; i < dbytes + hbytes; i++)
+ dseq[i] = 0xff;
+ CDEBUG(("cat_senddata: dbytes=%d, hbytes=%d, padbits=%d\n",
+ dbytes, hbytes, padbits));
+ cat_pack(dseq, modp->num_asics - 1 + asicp->ireg_length,
+ hseq, hbytes * BITS_PER_BYTE);
+ cat_pack(dseq, asicp->asic_location, &value,
+ asicp->ireg_length);
+#ifdef VOYAGER_CAT_DEBUG
+ printk("dseq ");
+ for(i=0; i<hbytes+dbytes; i++) {
+ printk("0x%x ", dseq[i]);
+ }
+ printk("\n");
+#endif
+ return cat_shiftout(dseq, dbytes, hbytes, padbits);
+ }
+}
+
+static int
+cat_write(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg,
+ __u8 value)
+{
+ if(cat_sendinst(modp, asicp, reg, VOYAGER_WRITE_CONFIG))
+ return 1;
+ return cat_senddata(modp, asicp, reg, value);
+}
+
+static int
+cat_read(voyager_module_t *modp, voyager_asic_t *asicp, __u8 reg,
+ __u8 *value)
+{
+ if(cat_sendinst(modp, asicp, reg, VOYAGER_READ_CONFIG))
+ return 1;
+ return cat_getdata(modp, asicp, reg, value);
+}
+
+static int
+cat_subaddrsetup(voyager_module_t *modp, voyager_asic_t *asicp, __u16 offset,
+ __u16 len)
+{
+ __u8 val;
+
+ if(len > 1) {
+ /* set auto increment */
+ __u8 newval;
+
+ if(cat_read(modp, asicp, VOYAGER_AUTO_INC_REG, &val)) {
+ CDEBUG(("cat_subaddrsetup: read of VOYAGER_AUTO_INC_REG failed\n"));
+ return 1;
+ }
+ CDEBUG(("cat_subaddrsetup: VOYAGER_AUTO_INC_REG = 0x%x\n", val));
+ newval = val | VOYAGER_AUTO_INC;
+ if(newval != val) {
+ if(cat_write(modp, asicp, VOYAGER_AUTO_INC_REG, val)) {
+ CDEBUG(("cat_subaddrsetup: write to VOYAGER_AUTO_INC_REG failed\n"));
+ return 1;
+ }
+ }
+ }
+ if(cat_write(modp, asicp, VOYAGER_SUBADDRLO, (__u8)(offset &0xff))) {
+ CDEBUG(("cat_subaddrsetup: write to SUBADDRLO failed\n"));
+ return 1;
+ }
+ if(asicp->subaddr > VOYAGER_SUBADDR_LO) {
+ if(cat_write(modp, asicp, VOYAGER_SUBADDRHI, (__u8)(offset >> 8))) {
+ CDEBUG(("cat_subaddrsetup: write to SUBADDRHI failed\n"));
+ return 1;
+ }
+ cat_read(modp, asicp, VOYAGER_SUBADDRHI, &val);
+ CDEBUG(("cat_subaddrsetup: offset = %d, hi = %d\n", offset, val));
+ }
+ cat_read(modp, asicp, VOYAGER_SUBADDRLO, &val);
+ CDEBUG(("cat_subaddrsetup: offset = %d, lo = %d\n", offset, val));
+ return 0;
+}
+
+static int
+cat_subwrite(voyager_module_t *modp, voyager_asic_t *asicp, __u16 offset,
+ __u16 len, void *buf)
+{
+ int i, retval;
+
+ /* FIXME: need special actions for VOYAGER_CAT_ID here */
+ if(asicp->asic_id == VOYAGER_CAT_ID) {
+ CDEBUG(("cat_subwrite: ATTEMPT TO WRITE TO CAT ASIC\n"));
+ /* FIXME -- This is supposed to be handled better
+ * There is a problem writing to the cat asic in the
+ * PSI. The 30us delay seems to work, though */
+ udelay(30);
+ }
+
+ if((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
+ printk("cat_subwrite: cat_subaddrsetup FAILED\n");
+ return retval;
+ }
+
+ if(cat_sendinst(modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_WRITE_CONFIG)) {
+ printk("cat_subwrite: cat_sendinst FAILED\n");
+ return 1;
+ }
+ for(i = 0; i < len; i++) {
+ if(cat_senddata(modp, asicp, 0xFF, ((__u8 *)buf)[i])) {
+ printk("cat_subwrite: cat_sendata element at %d FAILED\n", i);
+ return 1;
+ }
+ }
+ return 0;
+}
+static int
+cat_subread(voyager_module_t *modp, voyager_asic_t *asicp, __u16 offset,
+ __u16 len, void *buf)
+{
+ int i, retval;
+
+ if((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
+ CDEBUG(("cat_subread: cat_subaddrsetup FAILED\n"));
+ return retval;
+ }
+
+ if(cat_sendinst(modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_READ_CONFIG)) {
+ CDEBUG(("cat_subread: cat_sendinst failed\n"));
+ return 1;
+ }
+ for(i = 0; i < len; i++) {
+ if(cat_getdata(modp, asicp, 0xFF,
+ &((__u8 *)buf)[i])) {
+ CDEBUG(("cat_subread: cat_getdata element %d failed\n", i));
+ return 1;
+ }
+ }
+ return 0;
+}
+
+
+/* buffer for storing EPROM data read in during initialisation */
+static __initdata __u8 eprom_buf[0xFFFF];
+static voyager_module_t *voyager_initial_module;
+
+/* Initialise the cat bus components. We assume this is called by the
+ * boot cpu *after* all memory initialisation has been done (so we can
+ * use kmalloc) but before smp initialisation, so we can probe the SMP
+ * configuration and pick up necessary information. */
+void
+voyager_cat_init(void)
+{
+ voyager_module_t **modpp = &voyager_initial_module;
+ voyager_asic_t **asicpp;
+ voyager_asic_t *qabc_asic = NULL;
+ int i, j;
+ unsigned long qic_addr = 0;
+ __u8 qabc_data[0x20];
+ __u8 num_submodules, val;
+ voyager_eprom_hdr_t *eprom_hdr = (voyager_eprom_hdr_t *)&eprom_buf[0];
+
+ __u8 cmos[4];
+ unsigned long addr;
+
+ /* initiallise the SUS mailbox */
+ for(i=0; i<sizeof(cmos); i++)
+ cmos[i] = voyager_extended_cmos_read(VOYAGER_DUMP_LOCATION + i);
+ addr = *(unsigned long *)cmos;
+ if((addr & 0xff000000) != 0xff000000) {
+ printk(KERN_ERR "Voyager failed to get SUS mailbox (addr = 0x%lx\n", addr);
+ } else {
+ static struct resource res;
+
+ res.name = "voyager SUS";
+ res.start = addr;
+ res.end = addr+0x3ff;
+
+ request_resource(&iomem_resource, &res);
+ voyager_SUS = (struct voyager_SUS *)
+ ioremap(addr, 0x400);
+ printk(KERN_NOTICE "Voyager SUS mailbox version 0x%x\n",
+ voyager_SUS->SUS_version);
+ voyager_SUS->kernel_version = VOYAGER_MAILBOX_VERSION;
+ voyager_SUS->kernel_flags = VOYAGER_OS_HAS_SYSINT;
+ }
+
+ /* clear the processor counts */
+ voyager_extended_vic_processors = 0;
+ voyager_quad_processors = 0;
+
+
+
+ printk("VOYAGER: beginning CAT bus probe\n");
+ /* set up the SuperSet Port Block which tells us where the
+ * CAT communication port is */
+ sspb = inb(VOYAGER_SSPB_RELOCATION_PORT) * 0x100;
+ VDEBUG(("VOYAGER DEBUG: sspb = 0x%x\n", sspb));
+
+ /* now find out if were 8 slot or normal */
+ if((inb(VIC_PROC_WHO_AM_I) & EIGHT_SLOT_IDENTIFIER)
+ == EIGHT_SLOT_IDENTIFIER) {
+ voyager_8slot = 1;
+ printk(KERN_NOTICE "Voyager: Eight slot 51xx configuration detected\n");
+ }
+
+ for(i = VOYAGER_MIN_MODULE;
+ i <= VOYAGER_MAX_MODULE; i++) {
+ __u8 input;
+ int asic;
+ __u16 eprom_size;
+ __u16 sp_offset;
+
+ outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
+ outb(i, VOYAGER_CAT_CONFIG_PORT);
+
+ /* check the presence of the module */
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ outb(VOYAGER_CAT_IRCYC, CAT_CMD);
+ outb(VOYAGER_CAT_HEADER, CAT_DATA);
+ /* stream series of alternating 1's and 0's to stimulate
+ * response */
+ outb(0xAA, CAT_DATA);
+ input = inb(CAT_DATA);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ if(input != VOYAGER_CAT_HEADER) {
+ continue;
+ }
+ CDEBUG(("VOYAGER DEBUG: found module id 0x%x, %s\n", i,
+ cat_module_name(i)));
+ *modpp = kmalloc(sizeof(voyager_module_t), GFP_KERNEL); /*&voyager_module_storage[cat_count++];*/
+ if(*modpp == NULL) {
+ printk("**WARNING** kmalloc failure in cat_init\n");
+ continue;
+ }
+ memset(*modpp, 0, sizeof(voyager_module_t));
+ /* need temporary asic for cat_subread. It will be
+ * filled in correctly later */
+ (*modpp)->asic = kmalloc(sizeof(voyager_asic_t), GFP_KERNEL); /*&voyager_asic_storage[asic_count];*/
+ if((*modpp)->asic == NULL) {
+ printk("**WARNING** kmalloc failure in cat_init\n");
+ continue;
+ }
+ memset((*modpp)->asic, 0, sizeof(voyager_asic_t));
+ (*modpp)->asic->asic_id = VOYAGER_CAT_ID;
+ (*modpp)->asic->subaddr = VOYAGER_SUBADDR_HI;
+ (*modpp)->module_addr = i;
+ (*modpp)->scan_path_connected = 0;
+ if(i == VOYAGER_PSI) {
+ /* Exception leg for modules with no EEPROM */
+ printk("Module \"%s\"\n", cat_module_name(i));
+ continue;
+ }
+
+ CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_disconnect(*modpp, (*modpp)->asic);
+ if(cat_subread(*modpp, (*modpp)->asic,
+ VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
+ &eprom_size)) {
+ printk("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n", i);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ if(eprom_size > sizeof(eprom_buf)) {
+ printk("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x. Need %d\n", i, eprom_size);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i, eprom_size));
+ if(cat_subread(*modpp, (*modpp)->asic, 0,
+ eprom_size, eprom_buf)) {
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ printk("Module \"%s\", version 0x%x, tracer 0x%x, asics %d\n",
+ cat_module_name(i), eprom_hdr->version_id,
+ *((__u32 *)eprom_hdr->tracer), eprom_hdr->num_asics);
+ (*modpp)->ee_size = eprom_hdr->ee_size;
+ (*modpp)->num_asics = eprom_hdr->num_asics;
+ asicpp = &((*modpp)->asic);
+ sp_offset = eprom_hdr->scan_path_offset;
+ /* All we really care about are the Quad cards. We
+ * identify them because they are in a processor slot
+ * and have only four asics */
+ if((i < 0x10 || (i>=0x14 && i < 0x1c) || i>0x1f)) {
+ modpp = &((*modpp)->next);
+ continue;
+ }
+ /* Now we know it's in a processor slot, does it have
+ * a quad baseboard submodule */
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODPRESENT,
+ &num_submodules);
+ /* lowest two bits, active low */
+ num_submodules = ~(0xfc | num_submodules);
+ CDEBUG(("VOYAGER CAT: %d submodules present\n", num_submodules));
+ if(num_submodules == 0) {
+ /* fill in the dyadic extended processors */
+ __u8 cpu = i & 0x07;
+
+ printk("Module \"%s\": Dyadic Processor Card\n",
+ cat_module_name(i));
+ voyager_extended_vic_processors |= (1<<cpu);
+ cpu += 4;
+ voyager_extended_vic_processors |= (1<<cpu);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+
+ /* now we want to read the asics on the first submodule,
+ * which should be the quad base board */
+
+ cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, &val);
+ CDEBUG(("cat_init: SUBMODSELECT value = 0x%x\n", val));
+ val = (val & 0x7c) | VOYAGER_QUAD_BASEBOARD;
+ cat_write(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, val);
+
+ outb(VOYAGER_CAT_END, CAT_CMD);
+
+
+ CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_disconnect(*modpp, (*modpp)->asic);
+ if(cat_subread(*modpp, (*modpp)->asic,
+ VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
+ &eprom_size)) {
+ printk("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n", i);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ if(eprom_size > sizeof(eprom_buf)) {
+ printk("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x. Need %d\n", i, eprom_size);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i, eprom_size));
+ if(cat_subread(*modpp, (*modpp)->asic, 0,
+ eprom_size, eprom_buf)) {
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ continue;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ /* Now do everything for the QBB submodule 1 */
+ (*modpp)->ee_size = eprom_hdr->ee_size;
+ (*modpp)->num_asics = eprom_hdr->num_asics;
+ asicpp = &((*modpp)->asic);
+ sp_offset = eprom_hdr->scan_path_offset;
+ /* get rid of the dummy CAT asic and read the real one */
+ kfree((*modpp)->asic);
+ for(asic=0; asic < (*modpp)->num_asics; asic++) {
+ int j;
+ voyager_asic_t *asicp = *asicpp
+ = kmalloc(sizeof(voyager_asic_t), GFP_KERNEL); /*&voyager_asic_storage[asic_count++];*/
+ voyager_sp_table_t *sp_table;
+ voyager_at_t *asic_table;
+ voyager_jtt_t *jtag_table;
+
+ if(asicp == NULL) {
+ printk("**WARNING** kmalloc failure in cat_init\n");
+ continue;
+ }
+ memset(asicp, 0, sizeof(voyager_asic_t));
+ asicpp = &(asicp->next);
+ asicp->asic_location = asic;
+ sp_table = (voyager_sp_table_t *)(eprom_buf + sp_offset);
+ asicp->asic_id = sp_table->asic_id;
+ asic_table = (voyager_at_t *)(eprom_buf + sp_table->asic_data_offset);
+ for(j=0; j<4; j++)
+ asicp->jtag_id[j] = asic_table->jtag_id[j];
+ jtag_table = (voyager_jtt_t *)(eprom_buf + asic_table->jtag_offset);
+ asicp->ireg_length = jtag_table->ireg_len;
+ asicp->bit_location = (*modpp)->inst_bits;
+ (*modpp)->inst_bits += asicp->ireg_length;
+ if(asicp->ireg_length > (*modpp)->largest_reg)
+ (*modpp)->largest_reg = asicp->ireg_length;
+ if (asicp->ireg_length < (*modpp)->smallest_reg ||
+ (*modpp)->smallest_reg == 0)
+ (*modpp)->smallest_reg = asicp->ireg_length;
+ CDEBUG(("asic 0x%x, ireg_length=%d, bit_location=%d\n",
+ asicp->asic_id, asicp->ireg_length,
+ asicp->bit_location));
+ if(asicp->asic_id == VOYAGER_QUAD_QABC) {
+ CDEBUG(("VOYAGER CAT: QABC ASIC found\n"));
+ qabc_asic = asicp;
+ }
+ sp_offset += sizeof(voyager_sp_table_t);
+ }
+ CDEBUG(("Module inst_bits = %d, largest_reg = %d, smallest_reg=%d\n",
+ (*modpp)->inst_bits, (*modpp)->largest_reg,
+ (*modpp)->smallest_reg));
+ /* OK, now we have the QUAD ASICs set up, use them.
+ * we need to:
+ *
+ * 1. Find the Memory area for the Quad CPIs.
+ * 2. Find the Extended VIC processor
+ * 3. Configure a second extended VIC processor (This
+ * cannot be done for the 51xx.
+ * */
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_connect(*modpp, (*modpp)->asic);
+ CDEBUG(("CAT CONNECTED!!\n"));
+ cat_subread(*modpp, qabc_asic, 0, sizeof(qabc_data), qabc_data);
+ qic_addr = qabc_data[5] << 8;
+ qic_addr = (qic_addr | qabc_data[6]) << 8;
+ qic_addr = (qic_addr | qabc_data[7]) << 8;
+ printk("Module \"%s\": Quad Processor Card; CPI 0x%lx, SET=0x%x\n",
+ cat_module_name(i), qic_addr, qabc_data[8]);
+#if 0 /* plumbing fails---FIXME */
+ if((qabc_data[8] & 0xf0) == 0) {
+ /* FIXME: 32 way 8 CPU slot monster cannot be
+ * plumbed this way---need to check for it */
+
+ printk("Plumbing second Extended Quad Processor\n");
+ /* second VIC line hardwired to Quad CPU 1 */
+ qabc_data[8] |= 0x20;
+ cat_subwrite(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
+#ifdef VOYAGER_CAT_DEBUG
+ /* verify plumbing */
+ cat_subread(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
+ if((qabc_data[8] & 0xf0) == 0) {
+ CDEBUG(("PLUMBING FAILED: 0x%x\n", qabc_data[8]));
+ }
+#endif
+ }
+#endif
+
+ {
+ struct resource *res = kmalloc(sizeof(struct resource),GFP_KERNEL);
+ memset(res, 0, sizeof(struct resource));
+ res->name = kmalloc(128, GFP_KERNEL);
+ sprintf((char *)res->name, "Voyager %s Quad CPI", cat_module_name(i));
+ res->start = qic_addr;
+ res->end = qic_addr + 0x3ff;
+ request_resource(&iomem_resource, res);
+ }
+
+ qic_addr = (unsigned long)ioremap(qic_addr, 0x400);
+
+ for(j = 0; j < 4; j++) {
+ __u8 cpu;
+
+ if(voyager_8slot) {
+ /* 8 slot has a different mapping,
+ * each slot has only one vic line, so
+ * 1 cpu in each slot must be < 8 */
+ cpu = (i & 0x07) + j*8;
+ } else {
+ cpu = (i & 0x03) + j*4;
+ }
+ if( (qabc_data[8] & (1<<j))) {
+ voyager_extended_vic_processors |= (1<<cpu);
+ }
+ if(qabc_data[8] & (1<<(j+4)) ) {
+ /* Second SET register plumbed: Quad
+ * card has two VIC connected CPUs.
+ * Secondary cannot be booted as a VIC
+ * CPU */
+ voyager_extended_vic_processors |= (1<<cpu);
+ voyager_allowed_boot_processors &= (~(1<<cpu));
+ }
+
+ voyager_quad_processors |= (1<<cpu);
+ voyager_quad_cpi_addr[cpu] = (struct voyager_qic_cpi *)
+ (qic_addr+(j<<8));
+ CDEBUG(("CPU%d: CPI address 0x%lx\n", cpu,
+ (unsigned long)voyager_quad_cpi_addr[cpu]));
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+
+
+
+ *asicpp = NULL;
+ modpp = &((*modpp)->next);
+ }
+ *modpp = NULL;
+ printk("CAT Bus Initialisation finished: extended procs 0x%x, quad procs 0x%x, allowed vic boot = 0x%x\n", voyager_extended_vic_processors, voyager_quad_processors, voyager_allowed_boot_processors);
+ request_resource(&ioport_resource, &vic_res);
+ if(voyager_quad_processors)
+ request_resource(&ioport_resource, &qic_res);
+ /* set up the front power switch */
+}
+
+int
+voyager_cat_readb(__u8 module, __u8 asic, int reg)
+{
+ return 0;
+}
+
+static int
+cat_disconnect(voyager_module_t *modp, voyager_asic_t *asicp)
+{
+ __u8 val;
+ int err = 0;
+
+ if(!modp->scan_path_connected)
+ return 0;
+ if(asicp->asic_id != VOYAGER_CAT_ID) {
+ CDEBUG(("cat_disconnect: ASIC is not CAT\n"));
+ return 1;
+ }
+ err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
+ if(err) {
+ CDEBUG(("cat_disconnect: failed to read SCANPATH\n"));
+ return err;
+ }
+ val &= VOYAGER_DISCONNECT_ASIC;
+ err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
+ if(err) {
+ CDEBUG(("cat_disconnect: failed to write SCANPATH\n"));
+ return err;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ modp->scan_path_connected = 0;
+
+ return 0;
+}
+
+static int
+cat_connect(voyager_module_t *modp, voyager_asic_t *asicp)
+{
+ __u8 val;
+ int err = 0;
+
+ if(modp->scan_path_connected)
+ return 0;
+ if(asicp->asic_id != VOYAGER_CAT_ID) {
+ CDEBUG(("cat_connect: ASIC is not CAT\n"));
+ return 1;
+ }
+
+ err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
+ if(err) {
+ CDEBUG(("cat_connect: failed to read SCANPATH\n"));
+ return err;
+ }
+ val |= VOYAGER_CONNECT_ASIC;
+ err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
+ if(err) {
+ CDEBUG(("cat_connect: failed to write SCANPATH\n"));
+ return err;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ modp->scan_path_connected = 1;
+
+ return 0;
+}
+
+void
+voyager_cat_power_off(void)
+{
+ /* Power the machine off by writing to the PSI over the CAT
+ * bus */
+ __u8 data;
+ voyager_module_t psi = { 0 };
+ voyager_asic_t psi_asic = { 0 };
+
+ psi.asic = &psi_asic;
+ psi.asic->asic_id = VOYAGER_CAT_ID;
+ psi.asic->subaddr = VOYAGER_SUBADDR_HI;
+ psi.module_addr = VOYAGER_PSI;
+ psi.scan_path_connected = 0;
+
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ /* Connect the PSI to the CAT Bus */
+ outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_disconnect(&psi, &psi_asic);
+ /* Read the status */
+ cat_subread(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ CDEBUG(("PSI STATUS 0x%x\n", data));
+ /* These two writes are power off prep and perform */
+ data = PSI_CLEAR;
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ data = PSI_POWER_DOWN;
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+}
+
+struct voyager_status voyager_status = { 0 };
+
+void
+voyager_cat_psi(__u8 cmd, __u16 reg, __u8 *data)
+{
+ voyager_module_t psi = { 0 };
+ voyager_asic_t psi_asic = { 0 };
+
+ psi.asic = &psi_asic;
+ psi.asic->asic_id = VOYAGER_CAT_ID;
+ psi.asic->subaddr = VOYAGER_SUBADDR_HI;
+ psi.module_addr = VOYAGER_PSI;
+ psi.scan_path_connected = 0;
+
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ /* Connect the PSI to the CAT Bus */
+ outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_disconnect(&psi, &psi_asic);
+ switch(cmd) {
+ case VOYAGER_PSI_READ:
+ cat_read(&psi, &psi_asic, reg, data);
+ break;
+ case VOYAGER_PSI_WRITE:
+ cat_write(&psi, &psi_asic, reg, *data);
+ break;
+ case VOYAGER_PSI_SUBREAD:
+ cat_subread(&psi, &psi_asic, reg, 1, data);
+ break;
+ case VOYAGER_PSI_SUBWRITE:
+ cat_subwrite(&psi, &psi_asic, reg, 1, data);
+ break;
+ default:
+ printk(KERN_ERR "Voyager PSI, unrecognised command %d\n", cmd);
+ break;
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+}
+
+void
+voyager_cat_do_common_interrupt(void)
+{
+ /* This is caused either by a memory parity error or something
+ * in the PSI */
+ __u8 data;
+ voyager_module_t psi = { 0 };
+ voyager_asic_t psi_asic = { 0 };
+ struct voyager_psi psi_reg;
+ int i;
+ re_read:
+ psi.asic = &psi_asic;
+ psi.asic->asic_id = VOYAGER_CAT_ID;
+ psi.asic->subaddr = VOYAGER_SUBADDR_HI;
+ psi.module_addr = VOYAGER_PSI;
+ psi.scan_path_connected = 0;
+
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ /* Connect the PSI to the CAT Bus */
+ outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_disconnect(&psi, &psi_asic);
+ /* Read the status. NOTE: Need to read *all* the PSI regs here
+ * otherwise the cmn int will be reasserted */
+ for(i = 0; i < sizeof(psi_reg.regs); i++) {
+ cat_read(&psi, &psi_asic, i, &((__u8 *)&psi_reg.regs)[i]);
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ if((psi_reg.regs.checkbit & 0x02) == 0) {
+ psi_reg.regs.checkbit |= 0x02;
+ cat_write(&psi, &psi_asic, 5, psi_reg.regs.checkbit);
+ printk("VOYAGER RE-READ PSI\n");
+ goto re_read;
+ }
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ for(i = 0; i < sizeof(psi_reg.subregs); i++) {
+ /* This looks strange, but the PSI doesn't do auto increment
+ * correctly */
+ cat_subread(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG + i,
+ 1, &((__u8 *)&psi_reg.subregs)[i]);
+ }
+ outb(VOYAGER_CAT_END, CAT_CMD);
+#ifdef VOYAGER_CAT_DEBUG
+ printk("VOYAGER PSI: ");
+ for(i=0; i<sizeof(psi_reg.regs); i++)
+ printk("%02x ", ((__u8 *)&psi_reg.regs)[i]);
+ printk("\n ");
+ for(i=0; i<sizeof(psi_reg.subregs); i++)
+ printk("%02x ", ((__u8 *)&psi_reg.subregs)[i]);
+ printk("\n");
+#endif
+ if(psi_reg.regs.intstatus & PSI_MON) {
+ /* switch off or power fail */
+
+ if(psi_reg.subregs.supply & PSI_SWITCH_OFF) {
+ if(voyager_status.switch_off) {
+ printk(KERN_ERR "Voyager front panel switch turned off again---Immediate power off!\n");
+ voyager_cat_power_off();
+ /* not reached */
+ } else {
+ printk(KERN_ERR "Voyager front panel switch turned off\n");
+ voyager_status.switch_off = 1;
+ voyager_status.request_from_kernel = 1;
+ up(&kvoyagerd_sem);
+ }
+ /* Tell the hardware we're taking care of the
+ * shutdown, otherwise it will power the box off
+ * within 3 seconds of the switch being pressed and,
+ * which is much more important to us, continue to
+ * assert the common interrupt */
+ data = PSI_CLR_SWITCH_OFF;
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG,
+ 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ } else {
+
+ VDEBUG(("Voyager ac fail reg 0x%x\n",
+ psi_reg.subregs.ACfail));
+ if((psi_reg.subregs.ACfail & AC_FAIL_STAT_CHANGE) == 0) {
+ /* No further update */
+ return;
+ }
+#if 0
+ /* Don't bother trying to find out who failed.
+ * FIXME: This probably makes the code incorrect on
+ * anything other than a 345x */
+ for(i=0; i< 5; i++) {
+ if( psi_reg.subregs.ACfail &(1<<i)) {
+ break;
+ }
+ }
+ printk(KERN_NOTICE "AC FAIL IN SUPPLY %d\n", i);
+#endif
+ /* DON'T do this: it shuts down the AC PSI
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ data = PSI_MASK_MASK | i;
+ cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_MASK,
+ 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ */
+ printk(KERN_ERR "Voyager AC power failure\n");
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ data = PSI_COLD_START;
+ cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG,
+ 1, &data);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ voyager_status.power_fail = 1;
+ voyager_status.request_from_kernel = 1;
+ up(&kvoyagerd_sem);
+ }
+
+
+ } else if(psi_reg.regs.intstatus & PSI_FAULT) {
+ /* Major fault! */
+ printk(KERN_ERR "Voyager PSI Detected major fault, immediate power off!\n");
+ voyager_cat_power_off();
+ /* not reached */
+ } else if(psi_reg.regs.intstatus & (PSI_DC_FAIL | PSI_ALARM
+ | PSI_CURRENT | PSI_DVM
+ | PSI_PSCFAULT | PSI_STAT_CHG)) {
+ /* other psi fault */
+
+ printk(KERN_WARNING "Voyager PSI status 0x%x\n", data);
+ /* clear the PSI fault */
+ outb(VOYAGER_CAT_RUN, CAT_CMD);
+ cat_write(&psi, &psi_asic, VOYAGER_PSI_STATUS_REG, 0);
+ outb(VOYAGER_CAT_END, CAT_CMD);
+ }
+}
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
new file mode 100644
index 0000000..903d739
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -0,0 +1,1931 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager_smp.c
+ *
+ * This file provides all the same external entries as smp.c but uses
+ * the voyager hal to provide the functionality
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+#include <linux/completion.h>
+#include <asm/desc.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <asm/mtrr.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/arch_hooks.h>
+
+#include <linux/irq.h>
+
+/* TLB state -- visible externally, indexed physically */
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
+
+/* CPU IRQ affinity -- set to all ones initially */
+static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned = { [0 ... NR_CPUS-1] = ~0UL };
+
+/* per CPU data structure (for /proc/cpuinfo et al), visible externally
+ * indexed physically */
+struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
+
+/* physical ID of the CPU used to boot the system */
+unsigned char boot_cpu_id;
+
+/* The memory line addresses for the Quad CPIs */
+struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS] __cacheline_aligned;
+
+/* The masks for the Extended VIC processors, filled in by cat_init */
+__u32 voyager_extended_vic_processors = 0;
+
+/* Masks for the extended Quad processors which cannot be VIC booted */
+__u32 voyager_allowed_boot_processors = 0;
+
+/* The mask for the Quad Processors (both extended and non-extended) */
+__u32 voyager_quad_processors = 0;
+
+/* Total count of live CPUs, used in process.c to display
+ * the CPU information and in irq.c for the per CPU irq
+ * activity count. Finally exported by i386_ksyms.c */
+static int voyager_extended_cpus = 1;
+
+/* Have we found an SMP box - used by time.c to do the profiling
+ interrupt for timeslicing; do not set to 1 until the per CPU timer
+ interrupt is active */
+int smp_found_config = 0;
+
+/* Used for the invalidate map that's also checked in the spinlock */
+static volatile unsigned long smp_invalidate_needed;
+
+/* Bitmask of currently online CPUs - used by setup.c for
+ /proc/cpuinfo, visible externally but still physical */
+cpumask_t cpu_online_map = CPU_MASK_NONE;
+
+/* Bitmask of CPUs present in the system - exported by i386_syms.c, used
+ * by scheduler but indexed physically */
+cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+
+
+/* The internal functions */
+static void send_CPI(__u32 cpuset, __u8 cpi);
+static void ack_CPI(__u8 cpi);
+static int ack_QIC_CPI(__u8 cpi);
+static void ack_special_QIC_CPI(__u8 cpi);
+static void ack_VIC_CPI(__u8 cpi);
+static void send_CPI_allbutself(__u8 cpi);
+static void enable_vic_irq(unsigned int irq);
+static void disable_vic_irq(unsigned int irq);
+static unsigned int startup_vic_irq(unsigned int irq);
+static void enable_local_vic_irq(unsigned int irq);
+static void disable_local_vic_irq(unsigned int irq);
+static void before_handle_vic_irq(unsigned int irq);
+static void after_handle_vic_irq(unsigned int irq);
+static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask);
+static void ack_vic_irq(unsigned int irq);
+static void vic_enable_cpi(void);
+static void do_boot_cpu(__u8 cpuid);
+static void do_quad_bootstrap(void);
+static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *);
+
+int hard_smp_processor_id(void);
+
+/* Inline functions */
+static inline void
+send_one_QIC_CPI(__u8 cpu, __u8 cpi)
+{
+ voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi =
+ (smp_processor_id() << 16) + cpi;
+}
+
+static inline void
+send_QIC_CPI(__u32 cpuset, __u8 cpi)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if(cpuset & (1<<cpu)) {
+#ifdef VOYAGER_DEBUG
+ if(!cpu_isset(cpu, cpu_online_map))
+ VDEBUG(("CPU%d sending cpi %d to CPU%d not in cpu_online_map\n", hard_smp_processor_id(), cpi, cpu));
+#endif
+ send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
+ }
+ }
+}
+
+static inline void
+send_one_CPI(__u8 cpu, __u8 cpi)
+{
+ if(voyager_quad_processors & (1<<cpu))
+ send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
+ else
+ send_CPI(1<<cpu, cpi);
+}
+
+static inline void
+send_CPI_allbutself(__u8 cpi)
+{
+ __u8 cpu = smp_processor_id();
+ __u32 mask = cpus_addr(cpu_online_map)[0] & ~(1 << cpu);
+ send_CPI(mask, cpi);
+}
+
+static inline int
+is_cpu_quad(void)
+{
+ __u8 cpumask = inb(VIC_PROC_WHO_AM_I);
+ return ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER);
+}
+
+static inline int
+is_cpu_extended(void)
+{
+ __u8 cpu = hard_smp_processor_id();
+
+ return(voyager_extended_vic_processors & (1<<cpu));
+}
+
+static inline int
+is_cpu_vic_boot(void)
+{
+ __u8 cpu = hard_smp_processor_id();
+
+ return(voyager_extended_vic_processors
+ & voyager_allowed_boot_processors & (1<<cpu));
+}
+
+
+static inline void
+ack_CPI(__u8 cpi)
+{
+ switch(cpi) {
+ case VIC_CPU_BOOT_CPI:
+ if(is_cpu_quad() && !is_cpu_vic_boot())
+ ack_QIC_CPI(cpi);
+ else
+ ack_VIC_CPI(cpi);
+ break;
+ case VIC_SYS_INT:
+ case VIC_CMN_INT:
+ /* These are slightly strange. Even on the Quad card,
+ * They are vectored as VIC CPIs */
+ if(is_cpu_quad())
+ ack_special_QIC_CPI(cpi);
+ else
+ ack_VIC_CPI(cpi);
+ break;
+ default:
+ printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi);
+ break;
+ }
+}
+
+/* local variables */
+
+/* The VIC IRQ descriptors -- these look almost identical to the
+ * 8259 IRQs except that masks and things must be kept per processor
+ */
+static struct hw_interrupt_type vic_irq_type = {
+ .typename = "VIC-level",
+ .startup = startup_vic_irq,
+ .shutdown = disable_vic_irq,
+ .enable = enable_vic_irq,
+ .disable = disable_vic_irq,
+ .ack = before_handle_vic_irq,
+ .end = after_handle_vic_irq,
+ .set_affinity = set_vic_irq_affinity,
+};
+
+/* used to count up as CPUs are brought on line (starts at 0) */
+static int cpucount = 0;
+
+/* steal a page from the bottom of memory for the trampoline and
+ * squirrel its address away here. This will be in kernel virtual
+ * space */
+static __u32 trampoline_base;
+
+/* The per cpu profile stuff - used in smp_local_timer_interrupt */
+static DEFINE_PER_CPU(int, prof_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_counter) = 1;
+
+/* the map used to check if a CPU has booted */
+static __u32 cpu_booted_map;
+
+/* the synchronize flag used to hold all secondary CPUs spinning in
+ * a tight loop until the boot sequence is ready for them */
+static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
+
+/* This is for the new dynamic CPU boot code */
+cpumask_t cpu_callin_map = CPU_MASK_NONE;
+cpumask_t cpu_callout_map = CPU_MASK_NONE;
+
+/* The per processor IRQ masks (these are usually kept in sync) */
+static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
+
+/* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */
+static __u16 vic_irq_enable_mask[NR_CPUS] __cacheline_aligned = { 0 };
+
+/* Lock for enable/disable of VIC interrupts */
+static __cacheline_aligned DEFINE_SPINLOCK(vic_irq_lock);
+
+/* The boot processor is correctly set up in PC mode when it
+ * comes up, but the secondaries need their master/slave 8259
+ * pairs initializing correctly */
+
+/* Interrupt counters (per cpu) and total - used to try to
+ * even up the interrupt handling routines */
+static long vic_intr_total = 0;
+static long vic_intr_count[NR_CPUS] __cacheline_aligned = { 0 };
+static unsigned long vic_tick[NR_CPUS] __cacheline_aligned = { 0 };
+
+/* Since we can only use CPI0, we fake all the other CPIs */
+static unsigned long vic_cpi_mailbox[NR_CPUS] __cacheline_aligned;
+
+/* debugging routine to read the isr of the cpu's pic */
+static inline __u16
+vic_read_isr(void)
+{
+ __u16 isr;
+
+ outb(0x0b, 0xa0);
+ isr = inb(0xa0) << 8;
+ outb(0x0b, 0x20);
+ isr |= inb(0x20);
+
+ return isr;
+}
+
+static __init void
+qic_setup(void)
+{
+ if(!is_cpu_quad()) {
+ /* not a quad, no setup */
+ return;
+ }
+ outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
+ outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
+
+ if(is_cpu_extended()) {
+ /* the QIC duplicate of the VIC base register */
+ outb(VIC_DEFAULT_CPI_BASE, QIC_VIC_CPI_BASE_REGISTER);
+ outb(QIC_DEFAULT_CPI_BASE, QIC_CPI_BASE_REGISTER);
+
+ /* FIXME: should set up the QIC timer and memory parity
+ * error vectors here */
+ }
+}
+
+static __init void
+vic_setup_pic(void)
+{
+ outb(1, VIC_REDIRECT_REGISTER_1);
+ /* clear the claim registers for dynamic routing */
+ outb(0, VIC_CLAIM_REGISTER_0);
+ outb(0, VIC_CLAIM_REGISTER_1);
+
+ outb(0, VIC_PRIORITY_REGISTER);
+ /* Set the Primary and Secondary Microchannel vector
+ * bases to be the same as the ordinary interrupts
+ *
+ * FIXME: This would be more efficient using separate
+ * vectors. */
+ outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
+ outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
+ /* Now initiallise the master PIC belonging to this CPU by
+ * sending the four ICWs */
+
+ /* ICW1: level triggered, ICW4 needed */
+ outb(0x19, 0x20);
+
+ /* ICW2: vector base */
+ outb(FIRST_EXTERNAL_VECTOR, 0x21);
+
+ /* ICW3: slave at line 2 */
+ outb(0x04, 0x21);
+
+ /* ICW4: 8086 mode */
+ outb(0x01, 0x21);
+
+ /* now the same for the slave PIC */
+
+ /* ICW1: level trigger, ICW4 needed */
+ outb(0x19, 0xA0);
+
+ /* ICW2: slave vector base */
+ outb(FIRST_EXTERNAL_VECTOR + 8, 0xA1);
+
+ /* ICW3: slave ID */
+ outb(0x02, 0xA1);
+
+ /* ICW4: 8086 mode */
+ outb(0x01, 0xA1);
+}
+
+static void
+do_quad_bootstrap(void)
+{
+ if(is_cpu_quad() && is_cpu_vic_boot()) {
+ int i;
+ unsigned long flags;
+ __u8 cpuid = hard_smp_processor_id();
+
+ local_irq_save(flags);
+
+ for(i = 0; i<4; i++) {
+ /* FIXME: this would be >>3 &0x7 on the 32 way */
+ if(((cpuid >> 2) & 0x03) == i)
+ /* don't lower our own mask! */
+ continue;
+
+ /* masquerade as local Quad CPU */
+ outb(QIC_CPUID_ENABLE | i, QIC_PROCESSOR_ID);
+ /* enable the startup CPI */
+ outb(QIC_BOOT_CPI_MASK, QIC_MASK_REGISTER1);
+ /* restore cpu id */
+ outb(0, QIC_PROCESSOR_ID);
+ }
+ local_irq_restore(flags);
+ }
+}
+
+
+/* Set up all the basic stuff: read the SMP config and make all the
+ * SMP information reflect only the boot cpu. All others will be
+ * brought on-line later. */
+void __init
+find_smp_config(void)
+{
+ int i;
+
+ boot_cpu_id = hard_smp_processor_id();
+
+ printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id);
+
+ /* initialize the CPU structures (moved from smp_boot_cpus) */
+ for(i=0; i<NR_CPUS; i++) {
+ cpu_irq_affinity[i] = ~0;
+ }
+ cpu_online_map = cpumask_of_cpu(boot_cpu_id);
+
+ /* The boot CPU must be extended */
+ voyager_extended_vic_processors = 1<<boot_cpu_id;
+ /* initially, all of the first 8 cpu's can boot */
+ voyager_allowed_boot_processors = 0xff;
+ /* set up everything for just this CPU, we can alter
+ * this as we start the other CPUs later */
+ /* now get the CPU disposition from the extended CMOS */
+ cpus_addr(phys_cpu_present_map)[0] = voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
+ cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
+ cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
+ cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+ printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
+ /* Here we set up the VIC to enable SMP */
+ /* enable the CPIs by writing the base vector to their register */
+ outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
+ outb(1, VIC_REDIRECT_REGISTER_1);
+ /* set the claim registers for static routing --- Boot CPU gets
+ * all interrupts untill all other CPUs started */
+ outb(0xff, VIC_CLAIM_REGISTER_0);
+ outb(0xff, VIC_CLAIM_REGISTER_1);
+ /* Set the Primary and Secondary Microchannel vector
+ * bases to be the same as the ordinary interrupts
+ *
+ * FIXME: This would be more efficient using separate
+ * vectors. */
+ outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
+ outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
+
+ /* Finally tell the firmware that we're driving */
+ outb(inb(VOYAGER_SUS_IN_CONTROL_PORT) | VOYAGER_IN_CONTROL_FLAG,
+ VOYAGER_SUS_IN_CONTROL_PORT);
+
+ current_thread_info()->cpu = boot_cpu_id;
+}
+
+/*
+ * The bootstrap kernel entry code has set these up. Save them
+ * for a given CPU, id is physical */
+void __init
+smp_store_cpu_info(int id)
+{
+ struct cpuinfo_x86 *c=&cpu_data[id];
+
+ *c = boot_cpu_data;
+
+ identify_cpu(c);
+}
+
+/* set up the trampoline and return the physical address of the code */
+static __u32 __init
+setup_trampoline(void)
+{
+ /* these two are global symbols in trampoline.S */
+ extern __u8 trampoline_end[];
+ extern __u8 trampoline_data[];
+
+ memcpy((__u8 *)trampoline_base, trampoline_data,
+ trampoline_end - trampoline_data);
+ return virt_to_phys((__u8 *)trampoline_base);
+}
+
+/* Routine initially called when a non-boot CPU is brought online */
+static void __init
+start_secondary(void *unused)
+{
+ __u8 cpuid = hard_smp_processor_id();
+ /* external functions not defined in the headers */
+ extern void calibrate_delay(void);
+
+ cpu_init();
+
+ /* OK, we're in the routine */
+ ack_CPI(VIC_CPU_BOOT_CPI);
+
+ /* setup the 8259 master slave pair belonging to this CPU ---
+ * we won't actually receive any until the boot CPU
+ * relinquishes it's static routing mask */
+ vic_setup_pic();
+
+ qic_setup();
+
+ if(is_cpu_quad() && !is_cpu_vic_boot()) {
+ /* clear the boot CPI */
+ __u8 dummy;
+
+ dummy = voyager_quad_cpi_addr[cpuid]->qic_cpi[VIC_CPU_BOOT_CPI].cpi;
+ printk("read dummy %d\n", dummy);
+ }
+
+ /* lower the mask to receive CPIs */
+ vic_enable_cpi();
+
+ VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid));
+
+ /* enable interrupts */
+ local_irq_enable();
+
+ /* get our bogomips */
+ calibrate_delay();
+
+ /* save our processor parameters */
+ smp_store_cpu_info(cpuid);
+
+ /* if we're a quad, we may need to bootstrap other CPUs */
+ do_quad_bootstrap();
+
+ /* FIXME: this is rather a poor hack to prevent the CPU
+ * activating softirqs while it's supposed to be waiting for
+ * permission to proceed. Without this, the new per CPU stuff
+ * in the softirqs will fail */
+ local_irq_disable();
+ cpu_set(cpuid, cpu_callin_map);
+
+ /* signal that we're done */
+ cpu_booted_map = 1;
+
+ while (!cpu_isset(cpuid, smp_commenced_mask))
+ rep_nop();
+ local_irq_enable();
+
+ local_flush_tlb();
+
+ cpu_set(cpuid, cpu_online_map);
+ wmb();
+ cpu_idle();
+}
+
+
+/* Routine to kick start the given CPU and wait for it to report ready
+ * (or timeout in startup). When this routine returns, the requested
+ * CPU is either fully running and configured or known to be dead.
+ *
+ * We call this routine sequentially 1 CPU at a time, so no need for
+ * locking */
+
+static void __init
+do_boot_cpu(__u8 cpu)
+{
+ struct task_struct *idle;
+ int timeout;
+ unsigned long flags;
+ int quad_boot = (1<<cpu) & voyager_quad_processors
+ & ~( voyager_extended_vic_processors
+ & voyager_allowed_boot_processors);
+
+ /* For the 486, we can't use the 4Mb page table trick, so
+ * must map a region of memory */
+#ifdef CONFIG_M486
+ int i;
+ unsigned long *page_table_copies = (unsigned long *)
+ __get_free_page(GFP_KERNEL);
+#endif
+ pgd_t orig_swapper_pg_dir0;
+
+ /* This is an area in head.S which was used to set up the
+ * initial kernel stack. We need to alter this to give the
+ * booting CPU a new stack (taken from its idle process) */
+ extern struct {
+ __u8 *esp;
+ unsigned short ss;
+ } stack_start;
+ /* This is the format of the CPI IDT gate (in real mode) which
+ * we're hijacking to boot the CPU */
+ union IDTFormat {
+ struct seg {
+ __u16 Offset;
+ __u16 Segment;
+ } idt;
+ __u32 val;
+ } hijack_source;
+
+ __u32 *hijack_vector;
+ __u32 start_phys_address = setup_trampoline();
+
+ /* There's a clever trick to this: The linux trampoline is
+ * compiled to begin at absolute location zero, so make the
+ * address zero but have the data segment selector compensate
+ * for the actual address */
+ hijack_source.idt.Offset = start_phys_address & 0x000F;
+ hijack_source.idt.Segment = (start_phys_address >> 4) & 0xFFFF;
+
+ cpucount++;
+ idle = fork_idle(cpu);
+ if(IS_ERR(idle))
+ panic("failed fork for CPU%d", cpu);
+ idle->thread.eip = (unsigned long) start_secondary;
+ /* init_tasks (in sched.c) is indexed logically */
+ stack_start.esp = (void *) idle->thread.esp;
+
+ irq_ctx_init(cpu);
+
+ /* Note: Don't modify initial ss override */
+ VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu,
+ (unsigned long)hijack_source.val, hijack_source.idt.Segment,
+ hijack_source.idt.Offset, stack_start.esp));
+ /* set the original swapper_pg_dir[0] to map 0 to 4Mb transparently
+ * (so that the booting CPU can find start_32 */
+ orig_swapper_pg_dir0 = swapper_pg_dir[0];
+#ifdef CONFIG_M486
+ if(page_table_copies == NULL)
+ panic("No free memory for 486 page tables\n");
+ for(i = 0; i < PAGE_SIZE/sizeof(unsigned long); i++)
+ page_table_copies[i] = (i * PAGE_SIZE)
+ | _PAGE_RW | _PAGE_USER | _PAGE_PRESENT;
+
+ ((unsigned long *)swapper_pg_dir)[0] =
+ ((virt_to_phys(page_table_copies)) & PAGE_MASK)
+ | _PAGE_RW | _PAGE_USER | _PAGE_PRESENT;
+#else
+ ((unsigned long *)swapper_pg_dir)[0] =
+ (virt_to_phys(pg0) & PAGE_MASK)
+ | _PAGE_RW | _PAGE_USER | _PAGE_PRESENT;
+#endif
+
+ if(quad_boot) {
+ printk("CPU %d: non extended Quad boot\n", cpu);
+ hijack_vector = (__u32 *)phys_to_virt((VIC_CPU_BOOT_CPI + QIC_DEFAULT_CPI_BASE)*4);
+ *hijack_vector = hijack_source.val;
+ } else {
+ printk("CPU%d: extended VIC boot\n", cpu);
+ hijack_vector = (__u32 *)phys_to_virt((VIC_CPU_BOOT_CPI + VIC_DEFAULT_CPI_BASE)*4);
+ *hijack_vector = hijack_source.val;
+ /* VIC errata, may also receive interrupt at this address */
+ hijack_vector = (__u32 *)phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI + VIC_DEFAULT_CPI_BASE)*4);
+ *hijack_vector = hijack_source.val;
+ }
+ /* All non-boot CPUs start with interrupts fully masked. Need
+ * to lower the mask of the CPI we're about to send. We do
+ * this in the VIC by masquerading as the processor we're
+ * about to boot and lowering its interrupt mask */
+ local_irq_save(flags);
+ if(quad_boot) {
+ send_one_QIC_CPI(cpu, VIC_CPU_BOOT_CPI);
+ } else {
+ outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
+ /* here we're altering registers belonging to `cpu' */
+
+ outb(VIC_BOOT_INTERRUPT_MASK, 0x21);
+ /* now go back to our original identity */
+ outb(boot_cpu_id, VIC_PROCESSOR_ID);
+
+ /* and boot the CPU */
+
+ send_CPI((1<<cpu), VIC_CPU_BOOT_CPI);
+ }
+ cpu_booted_map = 0;
+ local_irq_restore(flags);
+
+ /* now wait for it to become ready (or timeout) */
+ for(timeout = 0; timeout < 50000; timeout++) {
+ if(cpu_booted_map)
+ break;
+ udelay(100);
+ }
+ /* reset the page table */
+ swapper_pg_dir[0] = orig_swapper_pg_dir0;
+ local_flush_tlb();
+#ifdef CONFIG_M486
+ free_page((unsigned long)page_table_copies);
+#endif
+
+ if (cpu_booted_map) {
+ VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n",
+ cpu, smp_processor_id()));
+
+ printk("CPU%d: ", cpu);
+ print_cpu_info(&cpu_data[cpu]);
+ wmb();
+ cpu_set(cpu, cpu_callout_map);
+ }
+ else {
+ printk("CPU%d FAILED TO BOOT: ", cpu);
+ if (*((volatile unsigned char *)phys_to_virt(start_phys_address))==0xA5)
+ printk("Stuck.\n");
+ else
+ printk("Not responding.\n");
+
+ cpucount--;
+ }
+}
+
+void __init
+smp_boot_cpus(void)
+{
+ int i;
+
+ /* CAT BUS initialisation must be done after the memory */
+ /* FIXME: The L4 has a catbus too, it just needs to be
+ * accessed in a totally different way */
+ if(voyager_level == 5) {
+ voyager_cat_init();
+
+ /* now that the cat has probed the Voyager System Bus, sanity
+ * check the cpu map */
+ if( ((voyager_quad_processors | voyager_extended_vic_processors)
+ & cpus_addr(phys_cpu_present_map)[0]) != cpus_addr(phys_cpu_present_map)[0]) {
+ /* should panic */
+ printk("\n\n***WARNING*** Sanity check of CPU present map FAILED\n");
+ }
+ } else if(voyager_level == 4)
+ voyager_extended_vic_processors = cpus_addr(phys_cpu_present_map)[0];
+
+ /* this sets up the idle task to run on the current cpu */
+ voyager_extended_cpus = 1;
+ /* Remove the global_irq_holder setting, it triggers a BUG() on
+ * schedule at the moment */
+ //global_irq_holder = boot_cpu_id;
+
+ /* FIXME: Need to do something about this but currently only works
+ * on CPUs with a tsc which none of mine have.
+ smp_tune_scheduling();
+ */
+ smp_store_cpu_info(boot_cpu_id);
+ printk("CPU%d: ", boot_cpu_id);
+ print_cpu_info(&cpu_data[boot_cpu_id]);
+
+ if(is_cpu_quad()) {
+ /* booting on a Quad CPU */
+ printk("VOYAGER SMP: Boot CPU is Quad\n");
+ qic_setup();
+ do_quad_bootstrap();
+ }
+
+ /* enable our own CPIs */
+ vic_enable_cpi();
+
+ cpu_set(boot_cpu_id, cpu_online_map);
+ cpu_set(boot_cpu_id, cpu_callout_map);
+
+ /* loop over all the extended VIC CPUs and boot them. The
+ * Quad CPUs must be bootstrapped by their extended VIC cpu */
+ for(i = 0; i < NR_CPUS; i++) {
+ if(i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+ continue;
+ do_boot_cpu(i);
+ /* This udelay seems to be needed for the Quad boots
+ * don't remove unless you know what you're doing */
+ udelay(1000);
+ }
+ /* we could compute the total bogomips here, but why bother?,
+ * Code added from smpboot.c */
+ {
+ unsigned long bogosum = 0;
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_isset(i, cpu_online_map))
+ bogosum += cpu_data[i].loops_per_jiffy;
+ printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ cpucount+1,
+ bogosum/(500000/HZ),
+ (bogosum/(5000/HZ))%100);
+ }
+ voyager_extended_cpus = hweight32(voyager_extended_vic_processors);
+ printk("VOYAGER: Extended (interrupt handling CPUs): %d, non-extended: %d\n", voyager_extended_cpus, num_booting_cpus() - voyager_extended_cpus);
+ /* that's it, switch to symmetric mode */
+ outb(0, VIC_PRIORITY_REGISTER);
+ outb(0, VIC_CLAIM_REGISTER_0);
+ outb(0, VIC_CLAIM_REGISTER_1);
+
+ VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus()));
+}
+
+/* Reload the secondary CPUs task structure (this function does not
+ * return ) */
+void __init
+initialize_secondary(void)
+{
+#if 0
+ // AC kernels only
+ set_current(hard_get_current());
+#endif
+
+ /*
+ * We don't actually need to load the full TSS,
+ * basically just the stack pointer and the eip.
+ */
+
+ asm volatile(
+ "movl %0,%%esp\n\t"
+ "jmp *%1"
+ :
+ :"r" (current->thread.esp),"r" (current->thread.eip));
+}
+
+/* handle a Voyager SYS_INT -- If we don't, the base board will
+ * panic the system.
+ *
+ * System interrupts occur because some problem was detected on the
+ * various busses. To find out what you have to probe all the
+ * hardware via the CAT bus. FIXME: At the moment we do nothing. */
+fastcall void
+smp_vic_sys_interrupt(struct pt_regs *regs)
+{
+ ack_CPI(VIC_SYS_INT);
+ printk("Voyager SYSTEM INTERRUPT\n");
+}
+
+/* Handle a voyager CMN_INT; These interrupts occur either because of
+ * a system status change or because a single bit memory error
+ * occurred. FIXME: At the moment, ignore all this. */
+fastcall void
+smp_vic_cmn_interrupt(struct pt_regs *regs)
+{
+ static __u8 in_cmn_int = 0;
+ static DEFINE_SPINLOCK(cmn_int_lock);
+
+ /* common ints are broadcast, so make sure we only do this once */
+ _raw_spin_lock(&cmn_int_lock);
+ if(in_cmn_int)
+ goto unlock_end;
+
+ in_cmn_int++;
+ _raw_spin_unlock(&cmn_int_lock);
+
+ VDEBUG(("Voyager COMMON INTERRUPT\n"));
+
+ if(voyager_level == 5)
+ voyager_cat_do_common_interrupt();
+
+ _raw_spin_lock(&cmn_int_lock);
+ in_cmn_int = 0;
+ unlock_end:
+ _raw_spin_unlock(&cmn_int_lock);
+ ack_CPI(VIC_CMN_INT);
+}
+
+/*
+ * Reschedule call back. Nothing to do, all the work is done
+ * automatically when we return from the interrupt. */
+static void
+smp_reschedule_interrupt(void)
+{
+ /* do nothing */
+}
+
+static struct mm_struct * flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+#define FLUSH_ALL 0xffffffff
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+static inline void
+leave_mm (unsigned long cpu)
+{
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+ BUG();
+ cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+ load_cr3(swapper_pg_dir);
+}
+
+
+/*
+ * Invalidate call-back
+ */
+static void
+smp_invalidate_interrupt(void)
+{
+ __u8 cpu = smp_processor_id();
+
+ if (!test_bit(cpu, &smp_invalidate_needed))
+ return;
+ /* This will flood messages. Don't uncomment unless you see
+ * Problems with cross cpu invalidation
+ VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n",
+ smp_processor_id()));
+ */
+
+ if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+ if (flush_va == FLUSH_ALL)
+ local_flush_tlb();
+ else
+ __flush_tlb_one(flush_va);
+ } else
+ leave_mm(cpu);
+ }
+ smp_mb__before_clear_bit();
+ clear_bit(cpu, &smp_invalidate_needed);
+ smp_mb__after_clear_bit();
+}
+
+/* All the new flush operations for 2.4 */
+
+
+/* This routine is called with a physical cpu mask */
+static void
+flush_tlb_others (unsigned long cpumask, struct mm_struct *mm,
+ unsigned long va)
+{
+ int stuck = 50000;
+
+ if (!cpumask)
+ BUG();
+ if ((cpumask & cpus_addr(cpu_online_map)[0]) != cpumask)
+ BUG();
+ if (cpumask & (1 << smp_processor_id()))
+ BUG();
+ if (!mm)
+ BUG();
+
+ spin_lock(&tlbstate_lock);
+
+ flush_mm = mm;
+ flush_va = va;
+ atomic_set_mask(cpumask, &smp_invalidate_needed);
+ /*
+ * We have to send the CPI only to
+ * CPUs affected.
+ */
+ send_CPI(cpumask, VIC_INVALIDATE_CPI);
+
+ while (smp_invalidate_needed) {
+ mb();
+ if(--stuck == 0) {
+ printk("***WARNING*** Stuck doing invalidate CPI (CPU%d)\n", smp_processor_id());
+ break;
+ }
+ }
+
+ /* Uncomment only to debug invalidation problems
+ VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu));
+ */
+
+ flush_mm = NULL;
+ flush_va = 0;
+ spin_unlock(&tlbstate_lock);
+}
+
+void
+flush_tlb_current_task(void)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long cpu_mask;
+
+ preempt_disable();
+
+ cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
+ local_flush_tlb();
+ if (cpu_mask)
+ flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+
+ preempt_enable();
+}
+
+
+void
+flush_tlb_mm (struct mm_struct * mm)
+{
+ unsigned long cpu_mask;
+
+ preempt_disable();
+
+ cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ local_flush_tlb();
+ else
+ leave_mm(smp_processor_id());
+ }
+ if (cpu_mask)
+ flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+
+ preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ unsigned long cpu_mask;
+
+ preempt_disable();
+
+ cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
+ if (current->active_mm == mm) {
+ if(current->mm)
+ __flush_tlb_one(va);
+ else
+ leave_mm(smp_processor_id());
+ }
+
+ if (cpu_mask)
+ flush_tlb_others(cpu_mask, mm, va);
+
+ preempt_enable();
+}
+
+/* enable the requested IRQs */
+static void
+smp_enable_irq_interrupt(void)
+{
+ __u8 irq;
+ __u8 cpu = get_cpu();
+
+ VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu,
+ vic_irq_enable_mask[cpu]));
+
+ spin_lock(&vic_irq_lock);
+ for(irq = 0; irq < 16; irq++) {
+ if(vic_irq_enable_mask[cpu] & (1<<irq))
+ enable_local_vic_irq(irq);
+ }
+ vic_irq_enable_mask[cpu] = 0;
+ spin_unlock(&vic_irq_lock);
+
+ put_cpu_no_resched();
+}
+
+/*
+ * CPU halt call-back
+ */
+static void
+smp_stop_cpu_function(void *dummy)
+{
+ VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id()));
+ cpu_clear(smp_processor_id(), cpu_online_map);
+ local_irq_disable();
+ for(;;)
+ __asm__("hlt");
+}
+
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+ void (*func) (void *info);
+ void *info;
+ volatile unsigned long started;
+ volatile unsigned long finished;
+ int wait;
+};
+
+static struct call_data_struct * call_data;
+
+/* execute a thread on a new CPU. The function to be called must be
+ * previously set up. This is used to schedule a function for
+ * execution on all CPU's - set up the function then broadcast a
+ * function_interrupt CPI to come here on each CPU */
+static void
+smp_call_function_interrupt(void)
+{
+ void (*func) (void *info) = call_data->func;
+ void *info = call_data->info;
+ /* must take copy of wait because call_data may be replaced
+ * unless the function is waiting for us to finish */
+ int wait = call_data->wait;
+ __u8 cpu = smp_processor_id();
+
+ /*
+ * Notify initiating CPU that I've grabbed the data and am
+ * about to execute the function
+ */
+ mb();
+ if(!test_and_clear_bit(cpu, &call_data->started)) {
+ /* If the bit wasn't set, this could be a replay */
+ printk(KERN_WARNING "VOYAGER SMP: CPU %d received call funtion with no call pending\n", cpu);
+ return;
+ }
+ /*
+ * At this point the info structure may be out of scope unless wait==1
+ */
+ irq_enter();
+ (*func)(info);
+ irq_exit();
+ if (wait) {
+ mb();
+ clear_bit(cpu, &call_data->finished);
+ }
+}
+
+/* Call this function on all CPUs using the function_interrupt above
+ <func> The function to run. This must be fast and non-blocking.
+ <info> An arbitrary pointer to pass to the function.
+ <retry> If true, keep retrying until ready.
+ <wait> If true, wait until function has completed on other CPUs.
+ [RETURNS] 0 on success, else a negative status code. Does not return until
+ remote CPUs are nearly ready to execute <<func>> or are or have executed.
+*/
+int
+smp_call_function (void (*func) (void *info), void *info, int retry,
+ int wait)
+{
+ struct call_data_struct data;
+ __u32 mask = cpus_addr(cpu_online_map)[0];
+
+ mask &= ~(1<<smp_processor_id());
+
+ if (!mask)
+ return 0;
+
+ /* Can deadlock when called with interrupts disabled */
+ WARN_ON(irqs_disabled());
+
+ data.func = func;
+ data.info = info;
+ data.started = mask;
+ data.wait = wait;
+ if (wait)
+ data.finished = mask;
+
+ spin_lock(&call_lock);
+ call_data = &data;
+ wmb();
+ /* Send a message to all other CPUs and wait for them to respond */
+ send_CPI_allbutself(VIC_CALL_FUNCTION_CPI);
+
+ /* Wait for response */
+ while (data.started)
+ barrier();
+
+ if (wait)
+ while (data.finished)
+ barrier();
+
+ spin_unlock(&call_lock);
+
+ return 0;
+}
+
+/* Sorry about the name. In an APIC based system, the APICs
+ * themselves are programmed to send a timer interrupt. This is used
+ * by linux to reschedule the processor. Voyager doesn't have this,
+ * so we use the system clock to interrupt one processor, which in
+ * turn, broadcasts a timer CPI to all the others --- we receive that
+ * CPI here. We don't use this actually for counting so losing
+ * ticks doesn't matter
+ *
+ * FIXME: For those CPU's which actually have a local APIC, we could
+ * try to use it to trigger this interrupt instead of having to
+ * broadcast the timer tick. Unfortunately, all my pentium DYADs have
+ * no local APIC, so I can't do this
+ *
+ * This function is currently a placeholder and is unused in the code */
+fastcall void
+smp_apic_timer_interrupt(struct pt_regs *regs)
+{
+ wrapper_smp_local_timer_interrupt(regs);
+}
+
+/* All of the QUAD interrupt GATES */
+fastcall void
+smp_qic_timer_interrupt(struct pt_regs *regs)
+{
+ ack_QIC_CPI(QIC_TIMER_CPI);
+ wrapper_smp_local_timer_interrupt(regs);
+}
+
+fastcall void
+smp_qic_invalidate_interrupt(struct pt_regs *regs)
+{
+ ack_QIC_CPI(QIC_INVALIDATE_CPI);
+ smp_invalidate_interrupt();
+}
+
+fastcall void
+smp_qic_reschedule_interrupt(struct pt_regs *regs)
+{
+ ack_QIC_CPI(QIC_RESCHEDULE_CPI);
+ smp_reschedule_interrupt();
+}
+
+fastcall void
+smp_qic_enable_irq_interrupt(struct pt_regs *regs)
+{
+ ack_QIC_CPI(QIC_ENABLE_IRQ_CPI);
+ smp_enable_irq_interrupt();
+}
+
+fastcall void
+smp_qic_call_function_interrupt(struct pt_regs *regs)
+{
+ ack_QIC_CPI(QIC_CALL_FUNCTION_CPI);
+ smp_call_function_interrupt();
+}
+
+fastcall void
+smp_vic_cpi_interrupt(struct pt_regs *regs)
+{
+ __u8 cpu = smp_processor_id();
+
+ if(is_cpu_quad())
+ ack_QIC_CPI(VIC_CPI_LEVEL0);
+ else
+ ack_VIC_CPI(VIC_CPI_LEVEL0);
+
+ if(test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu]))
+ wrapper_smp_local_timer_interrupt(regs);
+ if(test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu]))
+ smp_invalidate_interrupt();
+ if(test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu]))
+ smp_reschedule_interrupt();
+ if(test_and_clear_bit(VIC_ENABLE_IRQ_CPI, &vic_cpi_mailbox[cpu]))
+ smp_enable_irq_interrupt();
+ if(test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
+ smp_call_function_interrupt();
+}
+
+static void
+do_flush_tlb_all(void* info)
+{
+ unsigned long cpu = smp_processor_id();
+
+ __flush_tlb_all();
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+ leave_mm(cpu);
+}
+
+
+/* flush the TLB of every active CPU in the system */
+void
+flush_tlb_all(void)
+{
+ on_each_cpu(do_flush_tlb_all, 0, 1, 1);
+}
+
+/* used to set up the trampoline for other CPUs when the memory manager
+ * is sorted out */
+void __init
+smp_alloc_memory(void)
+{
+ trampoline_base = (__u32)alloc_bootmem_low_pages(PAGE_SIZE);
+ if(__pa(trampoline_base) >= 0x93000)
+ BUG();
+}
+
+/* send a reschedule CPI to one CPU by physical CPU number*/
+void
+smp_send_reschedule(int cpu)
+{
+ send_one_CPI(cpu, VIC_RESCHEDULE_CPI);
+}
+
+
+int
+hard_smp_processor_id(void)
+{
+ __u8 i;
+ __u8 cpumask = inb(VIC_PROC_WHO_AM_I);
+ if((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER)
+ return cpumask & 0x1F;
+
+ for(i = 0; i < 8; i++) {
+ if(cpumask & (1<<i))
+ return i;
+ }
+ printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask);
+ return 0;
+}
+
+/* broadcast a halt to all other CPUs */
+void
+smp_send_stop(void)
+{
+ smp_call_function(smp_stop_cpu_function, NULL, 1, 1);
+}
+
+/* this function is triggered in time.c when a clock tick fires
+ * we need to re-broadcast the tick to all CPUs */
+void
+smp_vic_timer_interrupt(struct pt_regs *regs)
+{
+ send_CPI_allbutself(VIC_TIMER_CPI);
+ smp_local_timer_interrupt(regs);
+}
+
+static inline void
+wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
+{
+ irq_enter();
+ smp_local_timer_interrupt(regs);
+ irq_exit();
+}
+
+/* local (per CPU) timer interrupt. It does both profiling and
+ * process statistics/rescheduling.
+ *
+ * We do profiling in every local tick, statistics/rescheduling
+ * happen only every 'profiling multiplier' ticks. The default
+ * multiplier is 1 and it can be changed by writing the new multiplier
+ * value into /proc/profile.
+ */
+void
+smp_local_timer_interrupt(struct pt_regs * regs)
+{
+ int cpu = smp_processor_id();
+ long weight;
+
+ profile_tick(CPU_PROFILING, regs);
+ if (--per_cpu(prof_counter, cpu) <= 0) {
+ /*
+ * The multiplier may have changed since the last time we got
+ * to this point as a result of the user writing to
+ * /proc/profile. In this case we need to adjust the APIC
+ * timer accordingly.
+ *
+ * Interrupts are already masked off at this point.
+ */
+ per_cpu(prof_counter,cpu) = per_cpu(prof_multiplier, cpu);
+ if (per_cpu(prof_counter, cpu) !=
+ per_cpu(prof_old_multiplier, cpu)) {
+ /* FIXME: need to update the vic timer tick here */
+ per_cpu(prof_old_multiplier, cpu) =
+ per_cpu(prof_counter, cpu);
+ }
+
+ update_process_times(user_mode(regs));
+ }
+
+ if( ((1<<cpu) & voyager_extended_vic_processors) == 0)
+ /* only extended VIC processors participate in
+ * interrupt distribution */
+ return;
+
+ /*
+ * We take the 'long' return path, and there every subsystem
+ * grabs the apropriate locks (kernel lock/ irq lock).
+ *
+ * we might want to decouple profiling from the 'long path',
+ * and do the profiling totally in assembly.
+ *
+ * Currently this isn't too much of an issue (performance wise),
+ * we can take more than 100K local irqs per second on a 100 MHz P5.
+ */
+
+ if((++vic_tick[cpu] & 0x7) != 0)
+ return;
+ /* get here every 16 ticks (about every 1/6 of a second) */
+
+ /* Change our priority to give someone else a chance at getting
+ * the IRQ. The algorithm goes like this:
+ *
+ * In the VIC, the dynamically routed interrupt is always
+ * handled by the lowest priority eligible (i.e. receiving
+ * interrupts) CPU. If >1 eligible CPUs are equal lowest, the
+ * lowest processor number gets it.
+ *
+ * The priority of a CPU is controlled by a special per-CPU
+ * VIC priority register which is 3 bits wide 0 being lowest
+ * and 7 highest priority..
+ *
+ * Therefore we subtract the average number of interrupts from
+ * the number we've fielded. If this number is negative, we
+ * lower the activity count and if it is positive, we raise
+ * it.
+ *
+ * I'm afraid this still leads to odd looking interrupt counts:
+ * the totals are all roughly equal, but the individual ones
+ * look rather skewed.
+ *
+ * FIXME: This algorithm is total crap when mixed with SMP
+ * affinity code since we now try to even up the interrupt
+ * counts when an affinity binding is keeping them on a
+ * particular CPU*/
+ weight = (vic_intr_count[cpu]*voyager_extended_cpus
+ - vic_intr_total) >> 4;
+ weight += 4;
+ if(weight > 7)
+ weight = 7;
+ if(weight < 0)
+ weight = 0;
+
+ outb((__u8)weight, VIC_PRIORITY_REGISTER);
+
+#ifdef VOYAGER_DEBUG
+ if((vic_tick[cpu] & 0xFFF) == 0) {
+ /* print this message roughly every 25 secs */
+ printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n",
+ cpu, vic_tick[cpu], weight);
+ }
+#endif
+}
+
+/* setup the profiling timer */
+int
+setup_profiling_timer(unsigned int multiplier)
+{
+ int i;
+
+ if ( (!multiplier))
+ return -EINVAL;
+
+ /*
+ * Set the new multiplier for each CPU. CPUs don't start using the
+ * new values until the next timer interrupt in which they do process
+ * accounting.
+ */
+ for (i = 0; i < NR_CPUS; ++i)
+ per_cpu(prof_multiplier, i) = multiplier;
+
+ return 0;
+}
+
+
+/* The CPIs are handled in the per cpu 8259s, so they must be
+ * enabled to be received: FIX: enabling the CPIs in the early
+ * boot sequence interferes with bug checking; enable them later
+ * on in smp_init */
+#define VIC_SET_GATE(cpi, vector) \
+ set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector))
+#define QIC_SET_GATE(cpi, vector) \
+ set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
+
+void __init
+smp_intr_init(void)
+{
+ int i;
+
+ /* initialize the per cpu irq mask to all disabled */
+ for(i = 0; i < NR_CPUS; i++)
+ vic_irq_mask[i] = 0xFFFF;
+
+ VIC_SET_GATE(VIC_CPI_LEVEL0, vic_cpi_interrupt);
+
+ VIC_SET_GATE(VIC_SYS_INT, vic_sys_interrupt);
+ VIC_SET_GATE(VIC_CMN_INT, vic_cmn_interrupt);
+
+ QIC_SET_GATE(QIC_TIMER_CPI, qic_timer_interrupt);
+ QIC_SET_GATE(QIC_INVALIDATE_CPI, qic_invalidate_interrupt);
+ QIC_SET_GATE(QIC_RESCHEDULE_CPI, qic_reschedule_interrupt);
+ QIC_SET_GATE(QIC_ENABLE_IRQ_CPI, qic_enable_irq_interrupt);
+ QIC_SET_GATE(QIC_CALL_FUNCTION_CPI, qic_call_function_interrupt);
+
+
+ /* now put the VIC descriptor into the first 48 IRQs
+ *
+ * This is for later: first 16 correspond to PC IRQs; next 16
+ * are Primary MC IRQs and final 16 are Secondary MC IRQs */
+ for(i = 0; i < 48; i++)
+ irq_desc[i].handler = &vic_irq_type;
+}
+
+/* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per
+ * processor to receive CPI */
+static void
+send_CPI(__u32 cpuset, __u8 cpi)
+{
+ int cpu;
+ __u32 quad_cpuset = (cpuset & voyager_quad_processors);
+
+ if(cpi < VIC_START_FAKE_CPI) {
+ /* fake CPI are only used for booting, so send to the
+ * extended quads as well---Quads must be VIC booted */
+ outb((__u8)(cpuset), VIC_CPI_Registers[cpi]);
+ return;
+ }
+ if(quad_cpuset)
+ send_QIC_CPI(quad_cpuset, cpi);
+ cpuset &= ~quad_cpuset;
+ cpuset &= 0xff; /* only first 8 CPUs vaild for VIC CPI */
+ if(cpuset == 0)
+ return;
+ for_each_online_cpu(cpu) {
+ if(cpuset & (1<<cpu))
+ set_bit(cpi, &vic_cpi_mailbox[cpu]);
+ }
+ if(cpuset)
+ outb((__u8)cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]);
+}
+
+/* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and
+ * set the cache line to shared by reading it.
+ *
+ * DON'T make this inline otherwise the cache line read will be
+ * optimised away
+ * */
+static int
+ack_QIC_CPI(__u8 cpi) {
+ __u8 cpu = hard_smp_processor_id();
+
+ cpi &= 7;
+
+ outb(1<<cpi, QIC_INTERRUPT_CLEAR1);
+ return voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi;
+}
+
+static void
+ack_special_QIC_CPI(__u8 cpi)
+{
+ switch(cpi) {
+ case VIC_CMN_INT:
+ outb(QIC_CMN_INT, QIC_INTERRUPT_CLEAR0);
+ break;
+ case VIC_SYS_INT:
+ outb(QIC_SYS_INT, QIC_INTERRUPT_CLEAR0);
+ break;
+ }
+ /* also clear at the VIC, just in case (nop for non-extended proc) */
+ ack_VIC_CPI(cpi);
+}
+
+/* Acknowledge receipt of CPI in the VIC (essentially an EOI) */
+static void
+ack_VIC_CPI(__u8 cpi)
+{
+#ifdef VOYAGER_DEBUG
+ unsigned long flags;
+ __u16 isr;
+ __u8 cpu = smp_processor_id();
+
+ local_irq_save(flags);
+ isr = vic_read_isr();
+ if((isr & (1<<(cpi &7))) == 0) {
+ printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu, cpi);
+ }
+#endif
+ /* send specific EOI; the two system interrupts have
+ * bit 4 set for a separate vector but behave as the
+ * corresponding 3 bit intr */
+ outb_p(0x60|(cpi & 7),0x20);
+
+#ifdef VOYAGER_DEBUG
+ if((vic_read_isr() & (1<<(cpi &7))) != 0) {
+ printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu, cpi);
+ }
+ local_irq_restore(flags);
+#endif
+}
+
+/* cribbed with thanks from irq.c */
+#define __byte(x,y) (((unsigned char *)&(y))[x])
+#define cached_21(cpu) (__byte(0,vic_irq_mask[cpu]))
+#define cached_A1(cpu) (__byte(1,vic_irq_mask[cpu]))
+
+static unsigned int
+startup_vic_irq(unsigned int irq)
+{
+ enable_vic_irq(irq);
+
+ return 0;
+}
+
+/* The enable and disable routines. This is where we run into
+ * conflicting architectural philosophy. Fundamentally, the voyager
+ * architecture does not expect to have to disable interrupts globally
+ * (the IRQ controllers belong to each CPU). The processor masquerade
+ * which is used to start the system shouldn't be used in a running OS
+ * since it will cause great confusion if two separate CPUs drive to
+ * the same IRQ controller (I know, I've tried it).
+ *
+ * The solution is a variant on the NCR lazy SPL design:
+ *
+ * 1) To disable an interrupt, do nothing (other than set the
+ * IRQ_DISABLED flag). This dares the interrupt actually to arrive.
+ *
+ * 2) If the interrupt dares to come in, raise the local mask against
+ * it (this will result in all the CPU masks being raised
+ * eventually).
+ *
+ * 3) To enable the interrupt, lower the mask on the local CPU and
+ * broadcast an Interrupt enable CPI which causes all other CPUs to
+ * adjust their masks accordingly. */
+
+static void
+enable_vic_irq(unsigned int irq)
+{
+ /* linux doesn't to processor-irq affinity, so enable on
+ * all CPUs we know about */
+ int cpu = smp_processor_id(), real_cpu;
+ __u16 mask = (1<<irq);
+ __u32 processorList = 0;
+ unsigned long flags;
+
+ VDEBUG(("VOYAGER: enable_vic_irq(%d) CPU%d affinity 0x%lx\n",
+ irq, cpu, cpu_irq_affinity[cpu]));
+ spin_lock_irqsave(&vic_irq_lock, flags);
+ for_each_online_cpu(real_cpu) {
+ if(!(voyager_extended_vic_processors & (1<<real_cpu)))
+ continue;
+ if(!(cpu_irq_affinity[real_cpu] & mask)) {
+ /* irq has no affinity for this CPU, ignore */
+ continue;
+ }
+ if(real_cpu == cpu) {
+ enable_local_vic_irq(irq);
+ }
+ else if(vic_irq_mask[real_cpu] & mask) {
+ vic_irq_enable_mask[real_cpu] |= mask;
+ processorList |= (1<<real_cpu);
+ }
+ }
+ spin_unlock_irqrestore(&vic_irq_lock, flags);
+ if(processorList)
+ send_CPI(processorList, VIC_ENABLE_IRQ_CPI);
+}
+
+static void
+disable_vic_irq(unsigned int irq)
+{
+ /* lazy disable, do nothing */
+}
+
+static void
+enable_local_vic_irq(unsigned int irq)
+{
+ __u8 cpu = smp_processor_id();
+ __u16 mask = ~(1 << irq);
+ __u16 old_mask = vic_irq_mask[cpu];
+
+ vic_irq_mask[cpu] &= mask;
+ if(vic_irq_mask[cpu] == old_mask)
+ return;
+
+ VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n",
+ irq, cpu));
+
+ if (irq & 8) {
+ outb_p(cached_A1(cpu),0xA1);
+ (void)inb_p(0xA1);
+ }
+ else {
+ outb_p(cached_21(cpu),0x21);
+ (void)inb_p(0x21);
+ }
+}
+
+static void
+disable_local_vic_irq(unsigned int irq)
+{
+ __u8 cpu = smp_processor_id();
+ __u16 mask = (1 << irq);
+ __u16 old_mask = vic_irq_mask[cpu];
+
+ if(irq == 7)
+ return;
+
+ vic_irq_mask[cpu] |= mask;
+ if(old_mask == vic_irq_mask[cpu])
+ return;
+
+ VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n",
+ irq, cpu));
+
+ if (irq & 8) {
+ outb_p(cached_A1(cpu),0xA1);
+ (void)inb_p(0xA1);
+ }
+ else {
+ outb_p(cached_21(cpu),0x21);
+ (void)inb_p(0x21);
+ }
+}
+
+/* The VIC is level triggered, so the ack can only be issued after the
+ * interrupt completes. However, we do Voyager lazy interrupt
+ * handling here: It is an extremely expensive operation to mask an
+ * interrupt in the vic, so we merely set a flag (IRQ_DISABLED). If
+ * this interrupt actually comes in, then we mask and ack here to push
+ * the interrupt off to another CPU */
+static void
+before_handle_vic_irq(unsigned int irq)
+{
+ irq_desc_t *desc = irq_desc + irq;
+ __u8 cpu = smp_processor_id();
+
+ _raw_spin_lock(&vic_irq_lock);
+ vic_intr_total++;
+ vic_intr_count[cpu]++;
+
+ if(!(cpu_irq_affinity[cpu] & (1<<irq))) {
+ /* The irq is not in our affinity mask, push it off
+ * onto another CPU */
+ VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d on cpu %d\n",
+ irq, cpu));
+ disable_local_vic_irq(irq);
+ /* set IRQ_INPROGRESS to prevent the handler in irq.c from
+ * actually calling the interrupt routine */
+ desc->status |= IRQ_REPLAY | IRQ_INPROGRESS;
+ } else if(desc->status & IRQ_DISABLED) {
+ /* Damn, the interrupt actually arrived, do the lazy
+ * disable thing. The interrupt routine in irq.c will
+ * not handle a IRQ_DISABLED interrupt, so nothing more
+ * need be done here */
+ VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n",
+ irq, cpu));
+ disable_local_vic_irq(irq);
+ desc->status |= IRQ_REPLAY;
+ } else {
+ desc->status &= ~IRQ_REPLAY;
+ }
+
+ _raw_spin_unlock(&vic_irq_lock);
+}
+
+/* Finish the VIC interrupt: basically mask */
+static void
+after_handle_vic_irq(unsigned int irq)
+{
+ irq_desc_t *desc = irq_desc + irq;
+
+ _raw_spin_lock(&vic_irq_lock);
+ {
+ unsigned int status = desc->status & ~IRQ_INPROGRESS;
+#ifdef VOYAGER_DEBUG
+ __u16 isr;
+#endif
+
+ desc->status = status;
+ if ((status & IRQ_DISABLED))
+ disable_local_vic_irq(irq);
+#ifdef VOYAGER_DEBUG
+ /* DEBUG: before we ack, check what's in progress */
+ isr = vic_read_isr();
+ if((isr & (1<<irq) && !(status & IRQ_REPLAY)) == 0) {
+ int i;
+ __u8 cpu = smp_processor_id();
+ __u8 real_cpu;
+ int mask; /* Um... initialize me??? --RR */
+
+ printk("VOYAGER SMP: CPU%d lost interrupt %d\n",
+ cpu, irq);
+ for_each_cpu(real_cpu, mask) {
+
+ outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu,
+ VIC_PROCESSOR_ID);
+ isr = vic_read_isr();
+ if(isr & (1<<irq)) {
+ printk("VOYAGER SMP: CPU%d ack irq %d\n",
+ real_cpu, irq);
+ ack_vic_irq(irq);
+ }
+ outb(cpu, VIC_PROCESSOR_ID);
+ }
+ }
+#endif /* VOYAGER_DEBUG */
+ /* as soon as we ack, the interrupt is eligible for
+ * receipt by another CPU so everything must be in
+ * order here */
+ ack_vic_irq(irq);
+ if(status & IRQ_REPLAY) {
+ /* replay is set if we disable the interrupt
+ * in the before_handle_vic_irq() routine, so
+ * clear the in progress bit here to allow the
+ * next CPU to handle this correctly */
+ desc->status &= ~(IRQ_REPLAY | IRQ_INPROGRESS);
+ }
+#ifdef VOYAGER_DEBUG
+ isr = vic_read_isr();
+ if((isr & (1<<irq)) != 0)
+ printk("VOYAGER SMP: after_handle_vic_irq() after ack irq=%d, isr=0x%x\n",
+ irq, isr);
+#endif /* VOYAGER_DEBUG */
+ }
+ _raw_spin_unlock(&vic_irq_lock);
+
+ /* All code after this point is out of the main path - the IRQ
+ * may be intercepted by another CPU if reasserted */
+}
+
+
+/* Linux processor - interrupt affinity manipulations.
+ *
+ * For each processor, we maintain a 32 bit irq affinity mask.
+ * Initially it is set to all 1's so every processor accepts every
+ * interrupt. In this call, we change the processor's affinity mask:
+ *
+ * Change from enable to disable:
+ *
+ * If the interrupt ever comes in to the processor, we will disable it
+ * and ack it to push it off to another CPU, so just accept the mask here.
+ *
+ * Change from disable to enable:
+ *
+ * change the mask and then do an interrupt enable CPI to re-enable on
+ * the selected processors */
+
+void
+set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ /* Only extended processors handle interrupts */
+ unsigned long real_mask;
+ unsigned long irq_mask = 1 << irq;
+ int cpu;
+
+ real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors;
+
+ if(cpus_addr(mask)[0] == 0)
+ /* can't have no cpu's to accept the interrupt -- extremely
+ * bad things will happen */
+ return;
+
+ if(irq == 0)
+ /* can't change the affinity of the timer IRQ. This
+ * is due to the constraint in the voyager
+ * architecture that the CPI also comes in on and IRQ
+ * line and we have chosen IRQ0 for this. If you
+ * raise the mask on this interrupt, the processor
+ * will no-longer be able to accept VIC CPIs */
+ return;
+
+ if(irq >= 32)
+ /* You can only have 32 interrupts in a voyager system
+ * (and 32 only if you have a secondary microchannel
+ * bus) */
+ return;
+
+ for_each_online_cpu(cpu) {
+ unsigned long cpu_mask = 1 << cpu;
+
+ if(cpu_mask & real_mask) {
+ /* enable the interrupt for this cpu */
+ cpu_irq_affinity[cpu] |= irq_mask;
+ } else {
+ /* disable the interrupt for this cpu */
+ cpu_irq_affinity[cpu] &= ~irq_mask;
+ }
+ }
+ /* this is magic, we now have the correct affinity maps, so
+ * enable the interrupt. This will send an enable CPI to
+ * those cpu's who need to enable it in their local masks,
+ * causing them to correct for the new affinity . If the
+ * interrupt is currently globally disabled, it will simply be
+ * disabled again as it comes in (voyager lazy disable). If
+ * the affinity map is tightened to disable the interrupt on a
+ * cpu, it will be pushed off when it comes in */
+ enable_vic_irq(irq);
+}
+
+static void
+ack_vic_irq(unsigned int irq)
+{
+ if (irq & 8) {
+ outb(0x62,0x20); /* Specific EOI to cascade */
+ outb(0x60|(irq & 7),0xA0);
+ } else {
+ outb(0x60 | (irq & 7),0x20);
+ }
+}
+
+/* enable the CPIs. In the VIC, the CPIs are delivered by the 8259
+ * but are not vectored by it. This means that the 8259 mask must be
+ * lowered to receive them */
+static __init void
+vic_enable_cpi(void)
+{
+ __u8 cpu = smp_processor_id();
+
+ /* just take a copy of the current mask (nop for boot cpu) */
+ vic_irq_mask[cpu] = vic_irq_mask[boot_cpu_id];
+
+ enable_local_vic_irq(VIC_CPI_LEVEL0);
+ enable_local_vic_irq(VIC_CPI_LEVEL1);
+ /* for sys int and cmn int */
+ enable_local_vic_irq(7);
+
+ if(is_cpu_quad()) {
+ outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
+ outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
+ VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n",
+ cpu, QIC_CPI_ENABLE));
+ }
+
+ VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n",
+ cpu, vic_irq_mask[cpu]));
+}
+
+void
+voyager_smp_dump()
+{
+ int old_cpu = smp_processor_id(), cpu;
+
+ /* dump the interrupt masks of each processor */
+ for_each_online_cpu(cpu) {
+ __u16 imr, isr, irr;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
+ imr = (inb(0xa1) << 8) | inb(0x21);
+ outb(0x0a, 0xa0);
+ irr = inb(0xa0) << 8;
+ outb(0x0a, 0x20);
+ irr |= inb(0x20);
+ outb(0x0b, 0xa0);
+ isr = inb(0xa0) << 8;
+ outb(0x0b, 0x20);
+ isr |= inb(0x20);
+ outb(old_cpu, VIC_PROCESSOR_ID);
+ local_irq_restore(flags);
+ printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n",
+ cpu, vic_irq_mask[cpu], imr, irr, isr);
+#if 0
+ /* These lines are put in to try to unstick an un ack'd irq */
+ if(isr != 0) {
+ int irq;
+ for(irq=0; irq<16; irq++) {
+ if(isr & (1<<irq)) {
+ printk("\tCPU%d: ack irq %d\n",
+ cpu, irq);
+ local_irq_save(flags);
+ outb(VIC_CPU_MASQUERADE_ENABLE | cpu,
+ VIC_PROCESSOR_ID);
+ ack_vic_irq(irq);
+ outb(old_cpu, VIC_PROCESSOR_ID);
+ local_irq_restore(flags);
+ }
+ }
+ }
+#endif
+ }
+}
+
+void
+smp_voyager_power_off(void *dummy)
+{
+ if(smp_processor_id() == boot_cpu_id)
+ voyager_power_off();
+ else
+ smp_stop_cpu_function(NULL);
+}
+
+void __init
+smp_prepare_cpus(unsigned int max_cpus)
+{
+ /* FIXME: ignore max_cpus for now */
+ smp_boot_cpus();
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+ cpu_set(smp_processor_id(), cpu_online_map);
+ cpu_set(smp_processor_id(), cpu_callout_map);
+}
+
+int __devinit
+__cpu_up(unsigned int cpu)
+{
+ /* This only works at boot for x86. See "rewrite" above. */
+ if (cpu_isset(cpu, smp_commenced_mask))
+ return -ENOSYS;
+
+ /* In case one didn't come up */
+ if (!cpu_isset(cpu, cpu_callin_map))
+ return -EIO;
+ /* Unleash the CPU! */
+ cpu_set(cpu, smp_commenced_mask);
+ while (!cpu_isset(cpu, cpu_online_map))
+ mb();
+ return 0;
+}
+
+void __init
+smp_cpus_done(unsigned int max_cpus)
+{
+ zap_low_mappings();
+}
diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/i386/mach-voyager/voyager_thread.c
new file mode 100644
index 0000000..9980eef
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_thread.c
@@ -0,0 +1,167 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager_thread.c
+ *
+ * This module provides the machine status monitor thread for the
+ * voyager architecture. This allows us to monitor the machine
+ * environment (temp, voltage, fan function) and the front panel and
+ * internal UPS. If a fault is detected, this thread takes corrective
+ * action (usually just informing init)
+ * */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/kmod.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <asm/desc.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
+#include <linux/irq.h>
+
+#define THREAD_NAME "kvoyagerd"
+
+/* external variables */
+int kvoyagerd_running = 0;
+DECLARE_MUTEX_LOCKED(kvoyagerd_sem);
+
+static int thread(void *);
+
+static __u8 set_timeout = 0;
+
+/* Start the machine monitor thread. Return 1 if OK, 0 if fail */
+static int __init
+voyager_thread_start(void)
+{
+ if(kernel_thread(thread, NULL, CLONE_KERNEL) < 0) {
+ /* This is serious, but not fatal */
+ printk(KERN_ERR "Voyager: Failed to create system monitor thread!!!\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int
+execute(const char *string)
+{
+ int ret;
+
+ char *envp[] = {
+ "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL,
+ };
+ char *argv[] = {
+ "/bin/bash",
+ "-c",
+ (char *)string,
+ NULL,
+ };
+
+ if ((ret = call_usermodehelper(argv[0], argv, envp, 1)) != 0) {
+ printk(KERN_ERR "Voyager failed to run \"%s\": %i\n",
+ string, ret);
+ }
+ return ret;
+}
+
+static void
+check_from_kernel(void)
+{
+ if(voyager_status.switch_off) {
+
+ /* FIXME: This should be configureable via proc */
+ execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
+ } else if(voyager_status.power_fail) {
+ VDEBUG(("Voyager daemon detected AC power failure\n"));
+
+ /* FIXME: This should be configureable via proc */
+ execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
+ set_timeout = 1;
+ }
+}
+
+static void
+check_continuing_condition(void)
+{
+ if(voyager_status.power_fail) {
+ __u8 data;
+ voyager_cat_psi(VOYAGER_PSI_SUBREAD,
+ VOYAGER_PSI_AC_FAIL_REG, &data);
+ if((data & 0x1f) == 0) {
+ /* all power restored */
+ printk(KERN_NOTICE "VOYAGER AC power restored, cancelling shutdown\n");
+ /* FIXME: should be user configureable */
+ execute("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
+ set_timeout = 0;
+ }
+ }
+}
+
+static void
+wakeup(unsigned long unused)
+{
+ up(&kvoyagerd_sem);
+}
+
+static int
+thread(void *unused)
+{
+ struct timer_list wakeup_timer;
+
+ kvoyagerd_running = 1;
+
+ reparent_to_init();
+ daemonize(THREAD_NAME);
+
+ set_timeout = 0;
+
+ init_timer(&wakeup_timer);
+
+ sigfillset(¤t->blocked);
+ current->signal->tty = NULL;
+
+ printk(KERN_NOTICE "Voyager starting monitor thread\n");
+
+ for(;;) {
+ down_interruptible(&kvoyagerd_sem);
+ VDEBUG(("Voyager Daemon awoken\n"));
+ if(voyager_status.request_from_kernel == 0) {
+ /* probably awoken from timeout */
+ check_continuing_condition();
+ } else {
+ check_from_kernel();
+ voyager_status.request_from_kernel = 0;
+ }
+ if(set_timeout) {
+ del_timer(&wakeup_timer);
+ wakeup_timer.expires = HZ + jiffies;
+ wakeup_timer.function = wakeup;
+ add_timer(&wakeup_timer);
+ }
+ }
+}
+
+static void __exit
+voyager_thread_stop(void)
+{
+ /* FIXME: do nothing at the moment */
+}
+
+module_init(voyager_thread_start);
+//module_exit(voyager_thread_stop);
diff --git a/arch/i386/math-emu/Makefile b/arch/i386/math-emu/Makefile
new file mode 100644
index 0000000..9c943fa
--- /dev/null
+++ b/arch/i386/math-emu/Makefile
@@ -0,0 +1,30 @@
+#
+# Makefile for wm-FPU-emu
+#
+
+#DEBUG = -DDEBUGGING
+DEBUG =
+PARANOID = -DPARANOID
+CFLAGS := $(CFLAGS) $(PARANOID) $(DEBUG) -fno-builtin $(MATH_EMULATION)
+
+EXTRA_AFLAGS := $(PARANOID)
+
+# From 'C' language sources:
+C_OBJS =fpu_entry.o errors.o \
+ fpu_arith.o fpu_aux.o fpu_etc.o fpu_tags.o fpu_trig.o \
+ load_store.o get_address.o \
+ poly_atan.o poly_l2.o poly_2xm1.o poly_sin.o poly_tan.o \
+ reg_add_sub.o reg_compare.o reg_constant.o reg_convert.o \
+ reg_ld_str.o reg_divide.o reg_mul.o
+
+# From 80x86 assembler sources:
+A_OBJS =reg_u_add.o reg_u_div.o reg_u_mul.o reg_u_sub.o \
+ div_small.o reg_norm.o reg_round.o \
+ wm_shrx.o wm_sqrt.o \
+ div_Xsig.o polynom_Xsig.o round_Xsig.o \
+ shr_Xsig.o mul_Xsig.o
+
+obj-y =$(C_OBJS) $(A_OBJS)
+
+proto:
+ cproto -e -DMAKING_PROTO *.c >fpu_proto.h
diff --git a/arch/i386/math-emu/README b/arch/i386/math-emu/README
new file mode 100644
index 0000000..e623549
--- /dev/null
+++ b/arch/i386/math-emu/README
@@ -0,0 +1,427 @@
+ +---------------------------------------------------------------------------+
+ | wm-FPU-emu an FPU emulator for 80386 and 80486SX microprocessors. |
+ | |
+ | Copyright (C) 1992,1993,1994,1995,1996,1997,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@melbpc.org.au |
+ | |
+ | This program is free software; you can redistribute it and/or modify |
+ | it under the terms of the GNU General Public License version 2 as |
+ | published by the Free Software Foundation. |
+ | |
+ | This program is distributed in the hope that it will be useful, |
+ | but WITHOUT ANY WARRANTY; without even the implied warranty of |
+ | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
+ | GNU General Public License for more details. |
+ | |
+ | You should have received a copy of the GNU General Public License |
+ | along with this program; if not, write to the Free Software |
+ | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
+ | |
+ +---------------------------------------------------------------------------+
+
+
+
+wm-FPU-emu is an FPU emulator for Linux. It is derived from wm-emu387
+which was my 80387 emulator for early versions of djgpp (gcc under
+msdos); wm-emu387 was in turn based upon emu387 which was written by
+DJ Delorie for djgpp. The interface to the Linux kernel is based upon
+the original Linux math emulator by Linus Torvalds.
+
+My target FPU for wm-FPU-emu is that described in the Intel486
+Programmer's Reference Manual (1992 edition). Unfortunately, numerous
+facets of the functioning of the FPU are not well covered in the
+Reference Manual. The information in the manual has been supplemented
+with measurements on real 80486's. Unfortunately, it is simply not
+possible to be sure that all of the peculiarities of the 80486 have
+been discovered, so there is always likely to be obscure differences
+in the detailed behaviour of the emulator and a real 80486.
+
+wm-FPU-emu does not implement all of the behaviour of the 80486 FPU,
+but is very close. See "Limitations" later in this file for a list of
+some differences.
+
+Please report bugs, etc to me at:
+ billm@melbpc.org.au
+or b.metzenthen@medoto.unimelb.edu.au
+
+For more information on the emulator and on floating point topics, see
+my web pages, currently at http://www.suburbia.net/~billm/
+
+
+--Bill Metzenthen
+ December 1999
+
+
+----------------------- Internals of wm-FPU-emu -----------------------
+
+Numeric algorithms:
+(1) Add, subtract, and multiply. Nothing remarkable in these.
+(2) Divide has been tuned to get reasonable performance. The algorithm
+ is not the obvious one which most people seem to use, but is designed
+ to take advantage of the characteristics of the 80386. I expect that
+ it has been invented many times before I discovered it, but I have not
+ seen it. It is based upon one of those ideas which one carries around
+ for years without ever bothering to check it out.
+(3) The sqrt function has been tuned to get good performance. It is based
+ upon Newton's classic method. Performance was improved by capitalizing
+ upon the properties of Newton's method, and the code is once again
+ structured taking account of the 80386 characteristics.
+(4) The trig, log, and exp functions are based in each case upon quasi-
+ "optimal" polynomial approximations. My definition of "optimal" was
+ based upon getting good accuracy with reasonable speed.
+(5) The argument reducing code for the trig function effectively uses
+ a value of pi which is accurate to more than 128 bits. As a consequence,
+ the reduced argument is accurate to more than 64 bits for arguments up
+ to a few pi, and accurate to more than 64 bits for most arguments,
+ even for arguments approaching 2^63. This is far superior to an
+ 80486, which uses a value of pi which is accurate to 66 bits.
+
+The code of the emulator is complicated slightly by the need to
+account for a limited form of re-entrancy. Normally, the emulator will
+emulate each FPU instruction to completion without interruption.
+However, it may happen that when the emulator is accessing the user
+memory space, swapping may be needed. In this case the emulator may be
+temporarily suspended while disk i/o takes place. During this time
+another process may use the emulator, thereby perhaps changing static
+variables. The code which accesses user memory is confined to five
+files:
+ fpu_entry.c
+ reg_ld_str.c
+ load_store.c
+ get_address.c
+ errors.c
+As from version 1.12 of the emulator, no static variables are used
+(apart from those in the kernel's per-process tables). The emulator is
+therefore now fully re-entrant, rather than having just the restricted
+form of re-entrancy which is required by the Linux kernel.
+
+----------------------- Limitations of wm-FPU-emu -----------------------
+
+There are a number of differences between the current wm-FPU-emu
+(version 2.01) and the 80486 FPU (apart from bugs). The differences
+are fewer than those which applied to the 1.xx series of the emulator.
+Some of the more important differences are listed below:
+
+The Roundup flag does not have much meaning for the transcendental
+functions and its 80486 value with these functions is likely to differ
+from its emulator value.
+
+In a few rare cases the Underflow flag obtained with the emulator will
+be different from that obtained with an 80486. This occurs when the
+following conditions apply simultaneously:
+(a) the operands have a higher precision than the current setting of the
+ precision control (PC) flags.
+(b) the underflow exception is masked.
+(c) the magnitude of the exact result (before rounding) is less than 2^-16382.
+(d) the magnitude of the final result (after rounding) is exactly 2^-16382.
+(e) the magnitude of the exact result would be exactly 2^-16382 if the
+ operands were rounded to the current precision before the arithmetic
+ operation was performed.
+If all of these apply, the emulator will set the Underflow flag but a real
+80486 will not.
+
+NOTE: Certain formats of Extended Real are UNSUPPORTED. They are
+unsupported by the 80486. They are the Pseudo-NaNs, Pseudoinfinities,
+and Unnormals. None of these will be generated by an 80486 or by the
+emulator. Do not use them. The emulator treats them differently in
+detail from the way an 80486 does.
+
+Self modifying code can cause the emulator to fail. An example of such
+code is:
+ movl %esp,[%ebx]
+ fld1
+The FPU instruction may be (usually will be) loaded into the pre-fetch
+queue of the CPU before the mov instruction is executed. If the
+destination of the 'movl' overlaps the FPU instruction then the bytes
+in the prefetch queue and memory will be inconsistent when the FPU
+instruction is executed. The emulator will be invoked but will not be
+able to find the instruction which caused the device-not-present
+exception. For this case, the emulator cannot emulate the behaviour of
+an 80486DX.
+
+Handling of the address size override prefix byte (0x67) has not been
+extensively tested yet. A major problem exists because using it in
+vm86 mode can cause a general protection fault. Address offsets
+greater than 0xffff appear to be illegal in vm86 mode but are quite
+acceptable (and work) in real mode. A small test program developed to
+check the addressing, and which runs successfully in real mode,
+crashes dosemu under Linux and also brings Windows down with a general
+protection fault message when run under the MS-DOS prompt of Windows
+3.1. (The program simply reads data from a valid address).
+
+The emulator supports 16-bit protected mode, with one difference from
+an 80486DX. A 80486DX will allow some floating point instructions to
+write a few bytes below the lowest address of the stack. The emulator
+will not allow this in 16-bit protected mode: no instructions are
+allowed to write outside the bounds set by the protection.
+
+----------------------- Performance of wm-FPU-emu -----------------------
+
+Speed.
+-----
+
+The speed of floating point computation with the emulator will depend
+upon instruction mix. Relative performance is best for the instructions
+which require most computation. The simple instructions are adversely
+affected by the FPU instruction trap overhead.
+
+
+Timing: Some simple timing tests have been made on the emulator functions.
+The times include load/store instructions. All times are in microseconds
+measured on a 33MHz 386 with 64k cache. The Turbo C tests were under
+ms-dos, the next two columns are for emulators running with the djgpp
+ms-dos extender. The final column is for wm-FPU-emu in Linux 0.97,
+using libm4.0 (hard).
+
+function Turbo C djgpp 1.06 WM-emu387 wm-FPU-emu
+
+ + 60.5 154.8 76.5 139.4
+ - 61.1-65.5 157.3-160.8 76.2-79.5 142.9-144.7
+ * 71.0 190.8 79.6 146.6
+ / 61.2-75.0 261.4-266.9 75.3-91.6 142.2-158.1
+
+ sin() 310.8 4692.0 319.0 398.5
+ cos() 284.4 4855.2 308.0 388.7
+ tan() 495.0 8807.1 394.9 504.7
+ atan() 328.9 4866.4 601.1 419.5-491.9
+
+ sqrt() 128.7 crashed 145.2 227.0
+ log() 413.1-419.1 5103.4-5354.21 254.7-282.2 409.4-437.1
+ exp() 479.1 6619.2 469.1 850.8
+
+
+The performance under Linux is improved by the use of look-ahead code.
+The following results show the improvement which is obtained under
+Linux due to the look-ahead code. Also given are the times for the
+original Linux emulator with the 4.1 'soft' lib.
+
+ [ Linus' note: I changed look-ahead to be the default under linux, as
+ there was no reason not to use it after I had edited it to be
+ disabled during tracing ]
+
+ wm-FPU-emu w original w
+ look-ahead 'soft' lib
+ + 106.4 190.2
+ - 108.6-111.6 192.4-216.2
+ * 113.4 193.1
+ / 108.8-124.4 700.1-706.2
+
+ sin() 390.5 2642.0
+ cos() 381.5 2767.4
+ tan() 496.5 3153.3
+ atan() 367.2-435.5 2439.4-3396.8
+
+ sqrt() 195.1 4732.5
+ log() 358.0-387.5 3359.2-3390.3
+ exp() 619.3 4046.4
+
+
+These figures are now somewhat out-of-date. The emulator has become
+progressively slower for most functions as more of the 80486 features
+have been implemented.
+
+
+----------------------- Accuracy of wm-FPU-emu -----------------------
+
+
+The accuracy of the emulator is in almost all cases equal to or better
+than that of an Intel 80486 FPU.
+
+The results of the basic arithmetic functions (+,-,*,/), and fsqrt
+match those of an 80486 FPU. They are the best possible; the error for
+these never exceeds 1/2 an lsb. The fprem and fprem1 instructions
+return exact results; they have no error.
+
+
+The following table compares the emulator accuracy for the sqrt(),
+trig and log functions against the Turbo C "emulator". For this table,
+each function was tested at about 400 points. Ideal worst-case results
+would be 64 bits. The reduced Turbo C accuracy of cos() and tan() for
+arguments greater than pi/4 can be thought of as being related to the
+precision of the argument x; e.g. an argument of pi/2-(1e-10) which is
+accurate to 64 bits can result in a relative accuracy in cos() of
+about 64 + log2(cos(x)) = 31 bits.
+
+
+Function Tested x range Worst result Turbo C
+ (relative bits)
+
+sqrt(x) 1 .. 2 64.1 63.2
+atan(x) 1e-10 .. 200 64.2 62.8
+cos(x) 0 .. pi/2-(1e-10) 64.4 (x <= pi/4) 62.4
+ 64.1 (x = pi/2-(1e-10)) 31.9
+sin(x) 1e-10 .. pi/2 64.0 62.8
+tan(x) 1e-10 .. pi/2-(1e-10) 64.0 (x <= pi/4) 62.1
+ 64.1 (x = pi/2-(1e-10)) 31.9
+exp(x) 0 .. 1 63.1 ** 62.9
+log(x) 1+1e-6 .. 2 63.8 ** 62.1
+
+** The accuracy for exp() and log() is low because the FPU (emulator)
+does not compute them directly; two operations are required.
+
+
+The emulator passes the "paranoia" tests (compiled with gcc 2.3.3 or
+later) for 'float' variables (24 bit precision numbers) when precision
+control is set to 24, 53 or 64 bits, and for 'double' variables (53
+bit precision numbers) when precision control is set to 53 bits (a
+properly performing FPU cannot pass the 'paranoia' tests for 'double'
+variables when precision control is set to 64 bits).
+
+The code for reducing the argument for the trig functions (fsin, fcos,
+fptan and fsincos) has been improved and now effectively uses a value
+for pi which is accurate to more than 128 bits precision. As a
+consequence, the accuracy of these functions for large arguments has
+been dramatically improved (and is now very much better than an 80486
+FPU). There is also now no degradation of accuracy for fcos and fptan
+for operands close to pi/2. Measured results are (note that the
+definition of accuracy has changed slightly from that used for the
+above table):
+
+Function Tested x range Worst result
+ (absolute bits)
+
+cos(x) 0 .. 9.22e+18 62.0
+sin(x) 1e-16 .. 9.22e+18 62.1
+tan(x) 1e-16 .. 9.22e+18 61.8
+
+It is possible with some effort to find very large arguments which
+give much degraded precision. For example, the integer number
+ 8227740058411162616.0
+is within about 10e-7 of a multiple of pi. To find the tan (for
+example) of this number to 64 bits precision it would be necessary to
+have a value of pi which had about 150 bits precision. The FPU
+emulator computes the result to about 42.6 bits precision (the correct
+result is about -9.739715e-8). On the other hand, an 80486 FPU returns
+0.01059, which in relative terms is hopelessly inaccurate.
+
+For arguments close to critical angles (which occur at multiples of
+pi/2) the emulator is more accurate than an 80486 FPU. For very large
+arguments, the emulator is far more accurate.
+
+
+Prior to version 1.20 of the emulator, the accuracy of the results for
+the transcendental functions (in their principal range) was not as
+good as the results from an 80486 FPU. From version 1.20, the accuracy
+has been considerably improved and these functions now give measured
+worst-case results which are better than the worst-case results given
+by an 80486 FPU.
+
+The following table gives the measured results for the emulator. The
+number of randomly selected arguments in each case is about half a
+million. The group of three columns gives the frequency of the given
+accuracy in number of times per million, thus the second of these
+columns shows that an accuracy of between 63.80 and 63.89 bits was
+found at a rate of 133 times per one million measurements for fsin.
+The results show that the fsin, fcos and fptan instructions return
+results which are in error (i.e. less accurate than the best possible
+result (which is 64 bits)) for about one per cent of all arguments
+between -pi/2 and +pi/2. The other instructions have a lower
+frequency of results which are in error. The last two columns give
+the worst accuracy which was found (in bits) and the approximate value
+of the argument which produced it.
+
+ frequency (per M)
+ ------------------- ---------------
+instr arg range # tests 63.7 63.8 63.9 worst at arg
+ bits bits bits bits
+----- ------------ ------- ---- ---- ----- ----- --------
+fsin (0,pi/2) 547756 0 133 10673 63.89 0.451317
+fcos (0,pi/2) 547563 0 126 10532 63.85 0.700801
+fptan (0,pi/2) 536274 11 267 10059 63.74 0.784876
+fpatan 4 quadrants 517087 0 8 1855 63.88 0.435121 (4q)
+fyl2x (0,20) 541861 0 0 1323 63.94 1.40923 (x)
+fyl2xp1 (-.293,.414) 520256 0 0 5678 63.93 0.408542 (x)
+f2xm1 (-1,1) 538847 4 481 6488 63.79 0.167709
+
+
+Tests performed on an 80486 FPU showed results of lower accuracy. The
+following table gives the results which were obtained with an AMD
+486DX2/66 (other tests indicate that an Intel 486DX produces
+identical results). The tests were basically the same as those used
+to measure the emulator (the values, being random, were in general not
+the same). The total number of tests for each instruction are given
+at the end of the table, in case each about 100k tests were performed.
+Another line of figures at the end of the table shows that most of the
+instructions return results which are in error for more than 10
+percent of the arguments tested.
+
+The numbers in the body of the table give the approx number of times a
+result of the given accuracy in bits (given in the left-most column)
+was obtained per one million arguments. For three of the instructions,
+two columns of results are given: * The second column for f2xm1 gives
+the number cases where the results of the first column were for a
+positive argument, this shows that this instruction gives better
+results for positive arguments than it does for negative. * In the
+cases of fcos and fptan, the first column gives the results when all
+cases where arguments greater than 1.5 were removed from the results
+given in the second column. Unlike the emulator, an 80486 FPU returns
+results of relatively poor accuracy for these instructions when the
+argument approaches pi/2. The table does not show those cases when the
+accuracy of the results were less than 62 bits, which occurs quite
+often for fsin and fptan when the argument approaches pi/2. This poor
+accuracy is discussed above in relation to the Turbo C "emulator", and
+the accuracy of the value of pi.
+
+
+bits f2xm1 f2xm1 fpatan fcos fcos fyl2x fyl2xp1 fsin fptan fptan
+62.0 0 0 0 0 437 0 0 0 0 925
+62.1 0 0 10 0 894 0 0 0 0 1023
+62.2 14 0 0 0 1033 0 0 0 0 945
+62.3 57 0 0 0 1202 0 0 0 0 1023
+62.4 385 0 0 10 1292 0 23 0 0 1178
+62.5 1140 0 0 119 1649 0 39 0 0 1149
+62.6 2037 0 0 189 1620 0 16 0 0 1169
+62.7 5086 14 0 646 2315 10 101 35 39 1402
+62.8 8818 86 0 984 3050 59 287 131 224 2036
+62.9 11340 1355 0 2126 4153 79 605 357 321 1948
+63.0 15557 4750 0 3319 5376 246 1281 862 808 2688
+63.1 20016 8288 0 4620 6628 511 2569 1723 1510 3302
+63.2 24945 11127 10 6588 8098 1120 4470 2968 2990 4724
+63.3 25686 12382 69 8774 10682 1906 6775 4482 5474 7236
+63.4 29219 14722 79 11109 12311 3094 9414 7259 8912 10587
+63.5 30458 14936 393 13802 15014 5874 12666 9609 13762 15262
+63.6 32439 16448 1277 17945 19028 10226 15537 14657 19158 20346
+63.7 35031 16805 4067 23003 23947 18910 20116 21333 25001 26209
+63.8 33251 15820 7673 24781 25675 24617 25354 24440 29433 30329
+63.9 33293 16833 18529 28318 29233 31267 31470 27748 29676 30601
+
+Per cent with error:
+ 30.9 3.2 18.5 9.8 13.1 11.6 17.4
+Total arguments tested:
+ 70194 70099 101784 100641 100641 101799 128853 114893 102675 102675
+
+
+------------------------- Contributors -------------------------------
+
+A number of people have contributed to the development of the
+emulator, often by just reporting bugs, sometimes with suggested
+fixes, and a few kind people have provided me with access in one way
+or another to an 80486 machine. Contributors include (to those people
+who I may have forgotten, please forgive me):
+
+Linus Torvalds
+Tommy.Thorn@daimi.aau.dk
+Andrew.Tridgell@anu.edu.au
+Nick Holloway, alfie@dcs.warwick.ac.uk
+Hermano Moura, moura@dcs.gla.ac.uk
+Jon Jagger, J.Jagger@scp.ac.uk
+Lennart Benschop
+Brian Gallew, geek+@CMU.EDU
+Thomas Staniszewski, ts3v+@andrew.cmu.edu
+Martin Howell, mph@plasma.apana.org.au
+M Saggaf, alsaggaf@athena.mit.edu
+Peter Barker, PETER@socpsy.sci.fau.edu
+tom@vlsivie.tuwien.ac.at
+Dan Russel, russed@rpi.edu
+Daniel Carosone, danielce@ee.mu.oz.au
+cae@jpmorgan.com
+Hamish Coleman, t933093@minyos.xx.rmit.oz.au
+Bruce Evans, bde@kralizec.zeta.org.au
+Timo Korvola, Timo.Korvola@hut.fi
+Rick Lyons, rick@razorback.brisnet.org.au
+Rick, jrs@world.std.com
+
+...and numerous others who responded to my request for help with
+a real 80486.
+
diff --git a/arch/i386/math-emu/control_w.h b/arch/i386/math-emu/control_w.h
new file mode 100644
index 0000000..ae2274d
--- /dev/null
+++ b/arch/i386/math-emu/control_w.h
@@ -0,0 +1,45 @@
+/*---------------------------------------------------------------------------+
+ | control_w.h |
+ | |
+ | Copyright (C) 1992,1993 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@vaxc.cc.monash.edu.au |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _CONTROLW_H_
+#define _CONTROLW_H_
+
+#ifdef __ASSEMBLY__
+#define _Const_(x) $##x
+#else
+#define _Const_(x) x
+#endif
+
+#define CW_RC _Const_(0x0C00) /* rounding control */
+#define CW_PC _Const_(0x0300) /* precision control */
+
+#define CW_Precision Const_(0x0020) /* loss of precision mask */
+#define CW_Underflow Const_(0x0010) /* underflow mask */
+#define CW_Overflow Const_(0x0008) /* overflow mask */
+#define CW_ZeroDiv Const_(0x0004) /* divide by zero mask */
+#define CW_Denormal Const_(0x0002) /* denormalized operand mask */
+#define CW_Invalid Const_(0x0001) /* invalid operation mask */
+
+#define CW_Exceptions _Const_(0x003f) /* all masks */
+
+#define RC_RND _Const_(0x0000)
+#define RC_DOWN _Const_(0x0400)
+#define RC_UP _Const_(0x0800)
+#define RC_CHOP _Const_(0x0C00)
+
+/* p 15-5: Precision control bits affect only the following:
+ ADD, SUB(R), MUL, DIV(R), and SQRT */
+#define PR_24_BITS _Const_(0x000)
+#define PR_53_BITS _Const_(0x200)
+#define PR_64_BITS _Const_(0x300)
+#define PR_RESERVED_BITS _Const_(0x100)
+/* FULL_PRECISION simulates all exceptions masked */
+#define FULL_PRECISION (PR_64_BITS | RC_RND | 0x3f)
+
+#endif /* _CONTROLW_H_ */
diff --git a/arch/i386/math-emu/div_Xsig.S b/arch/i386/math-emu/div_Xsig.S
new file mode 100644
index 0000000..f77ba30
--- /dev/null
+++ b/arch/i386/math-emu/div_Xsig.S
@@ -0,0 +1,365 @@
+ .file "div_Xsig.S"
+/*---------------------------------------------------------------------------+
+ | div_Xsig.S |
+ | |
+ | Division subroutine for 96 bit quantities |
+ | |
+ | Copyright (C) 1994,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Divide the 96 bit quantity pointed to by a, by that pointed to by b, and |
+ | put the 96 bit result at the location d. |
+ | |
+ | The result may not be accurate to 96 bits. It is intended for use where |
+ | a result better than 64 bits is required. The result should usually be |
+ | good to at least 94 bits. |
+ | The returned result is actually divided by one half. This is done to |
+ | prevent overflow. |
+ | |
+ | .aaaaaaaaaaaaaa / .bbbbbbbbbbbbb -> .dddddddddddd |
+ | |
+ | void div_Xsig(Xsig *a, Xsig *b, Xsig *dest) |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "fpu_emu.h"
+
+
+#define XsigLL(x) (x)
+#define XsigL(x) 4(x)
+#define XsigH(x) 8(x)
+
+
+#ifndef NON_REENTRANT_FPU
+/*
+ Local storage on the stack:
+ Accumulator: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
+ */
+#define FPU_accum_3 -4(%ebp)
+#define FPU_accum_2 -8(%ebp)
+#define FPU_accum_1 -12(%ebp)
+#define FPU_accum_0 -16(%ebp)
+#define FPU_result_3 -20(%ebp)
+#define FPU_result_2 -24(%ebp)
+#define FPU_result_1 -28(%ebp)
+
+#else
+.data
+/*
+ Local storage in a static area:
+ Accumulator: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
+ */
+ .align 4,0
+FPU_accum_3:
+ .long 0
+FPU_accum_2:
+ .long 0
+FPU_accum_1:
+ .long 0
+FPU_accum_0:
+ .long 0
+FPU_result_3:
+ .long 0
+FPU_result_2:
+ .long 0
+FPU_result_1:
+ .long 0
+#endif /* NON_REENTRANT_FPU */
+
+
+.text
+ENTRY(div_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+#ifndef NON_REENTRANT_FPU
+ subl $28,%esp
+#endif /* NON_REENTRANT_FPU */
+
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%esi /* pointer to num */
+ movl PARAM2,%ebx /* pointer to denom */
+
+#ifdef PARANOID
+ testl $0x80000000, XsigH(%ebx) /* Divisor */
+ je L_bugged
+#endif /* PARANOID */
+
+
+/*---------------------------------------------------------------------------+
+ | Divide: Return arg1/arg2 to arg3. |
+ | |
+ | The maximum returned value is (ignoring exponents) |
+ | .ffffffff ffffffff |
+ | ------------------ = 1.ffffffff fffffffe |
+ | .80000000 00000000 |
+ | and the minimum is |
+ | .80000000 00000000 |
+ | ------------------ = .80000000 00000001 (rounded) |
+ | .ffffffff ffffffff |
+ | |
+ +---------------------------------------------------------------------------*/
+
+ /* Save extended dividend in local register */
+
+ /* Divide by 2 to prevent overflow */
+ clc
+ movl XsigH(%esi),%eax
+ rcrl %eax
+ movl %eax,FPU_accum_3
+ movl XsigL(%esi),%eax
+ rcrl %eax
+ movl %eax,FPU_accum_2
+ movl XsigLL(%esi),%eax
+ rcrl %eax
+ movl %eax,FPU_accum_1
+ movl $0,%eax
+ rcrl %eax
+ movl %eax,FPU_accum_0
+
+ movl FPU_accum_2,%eax /* Get the current num */
+ movl FPU_accum_3,%edx
+
+/*----------------------------------------------------------------------*/
+/* Initialization done.
+ Do the first 32 bits. */
+
+ /* We will divide by a number which is too large */
+ movl XsigH(%ebx),%ecx
+ addl $1,%ecx
+ jnc LFirst_div_not_1
+
+ /* here we need to divide by 100000000h,
+ i.e., no division at all.. */
+ mov %edx,%eax
+ jmp LFirst_div_done
+
+LFirst_div_not_1:
+ divl %ecx /* Divide the numerator by the augmented
+ denom ms dw */
+
+LFirst_div_done:
+ movl %eax,FPU_result_3 /* Put the result in the answer */
+
+ mull XsigH(%ebx) /* mul by the ms dw of the denom */
+
+ subl %eax,FPU_accum_2 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_3
+
+ movl FPU_result_3,%eax /* Get the result back */
+ mull XsigL(%ebx) /* now mul the ls dw of the denom */
+
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+ sbbl $0,FPU_accum_3
+ je LDo_2nd_32_bits /* Must check for non-zero result here */
+
+#ifdef PARANOID
+ jb L_bugged_1
+#endif /* PARANOID */
+
+ /* need to subtract another once of the denom */
+ incl FPU_result_3 /* Correct the answer */
+
+ movl XsigL(%ebx),%eax
+ movl XsigH(%ebx),%edx
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+
+#ifdef PARANOID
+ sbbl $0,FPU_accum_3
+ jne L_bugged_1 /* Must check for non-zero result here */
+#endif /* PARANOID */
+
+/*----------------------------------------------------------------------*/
+/* Half of the main problem is done, there is just a reduced numerator
+ to handle now.
+ Work with the second 32 bits, FPU_accum_0 not used from now on */
+LDo_2nd_32_bits:
+ movl FPU_accum_2,%edx /* get the reduced num */
+ movl FPU_accum_1,%eax
+
+ /* need to check for possible subsequent overflow */
+ cmpl XsigH(%ebx),%edx
+ jb LDo_2nd_div
+ ja LPrevent_2nd_overflow
+
+ cmpl XsigL(%ebx),%eax
+ jb LDo_2nd_div
+
+LPrevent_2nd_overflow:
+/* The numerator is greater or equal, would cause overflow */
+ /* prevent overflow */
+ subl XsigL(%ebx),%eax
+ sbbl XsigH(%ebx),%edx
+ movl %edx,FPU_accum_2
+ movl %eax,FPU_accum_1
+
+ incl FPU_result_3 /* Reflect the subtraction in the answer */
+
+#ifdef PARANOID
+ je L_bugged_2 /* Can't bump the result to 1.0 */
+#endif /* PARANOID */
+
+LDo_2nd_div:
+ cmpl $0,%ecx /* augmented denom msw */
+ jnz LSecond_div_not_1
+
+ /* %ecx == 0, we are dividing by 1.0 */
+ mov %edx,%eax
+ jmp LSecond_div_done
+
+LSecond_div_not_1:
+ divl %ecx /* Divide the numerator by the denom ms dw */
+
+LSecond_div_done:
+ movl %eax,FPU_result_2 /* Put the result in the answer */
+
+ mull XsigH(%ebx) /* mul by the ms dw of the denom */
+
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+#endif /* PARANOID */
+
+ movl FPU_result_2,%eax /* Get the result back */
+ mull XsigL(%ebx) /* now mul the ls dw of the denom */
+
+ subl %eax,FPU_accum_0 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl $0,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+#endif /* PARANOID */
+
+ jz LDo_3rd_32_bits
+
+#ifdef PARANOID
+ cmpl $1,FPU_accum_2
+ jne L_bugged_2
+#endif /* PARANOID */
+
+ /* need to subtract another once of the denom */
+ movl XsigL(%ebx),%eax
+ movl XsigH(%ebx),%edx
+ subl %eax,FPU_accum_0 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_1
+ sbbl $0,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+ jne L_bugged_2
+#endif /* PARANOID */
+
+ addl $1,FPU_result_2 /* Correct the answer */
+ adcl $0,FPU_result_3
+
+#ifdef PARANOID
+ jc L_bugged_2 /* Must check for non-zero result here */
+#endif /* PARANOID */
+
+/*----------------------------------------------------------------------*/
+/* The division is essentially finished here, we just need to perform
+ tidying operations.
+ Deal with the 3rd 32 bits */
+LDo_3rd_32_bits:
+ /* We use an approximation for the third 32 bits.
+ To take account of the 3rd 32 bits of the divisor
+ (call them del), we subtract del * (a/b) */
+
+ movl FPU_result_3,%eax /* a/b */
+ mull XsigLL(%ebx) /* del */
+
+ subl %edx,FPU_accum_1
+
+ /* A borrow indicates that the result is negative */
+ jnb LTest_over
+
+ movl XsigH(%ebx),%edx
+ addl %edx,FPU_accum_1
+
+ subl $1,FPU_result_2 /* Adjust the answer */
+ sbbl $0,FPU_result_3
+
+ /* The above addition might not have been enough, check again. */
+ movl FPU_accum_1,%edx /* get the reduced num */
+ cmpl XsigH(%ebx),%edx /* denom */
+ jb LDo_3rd_div
+
+ movl XsigH(%ebx),%edx
+ addl %edx,FPU_accum_1
+
+ subl $1,FPU_result_2 /* Adjust the answer */
+ sbbl $0,FPU_result_3
+ jmp LDo_3rd_div
+
+LTest_over:
+ movl FPU_accum_1,%edx /* get the reduced num */
+
+ /* need to check for possible subsequent overflow */
+ cmpl XsigH(%ebx),%edx /* denom */
+ jb LDo_3rd_div
+
+ /* prevent overflow */
+ subl XsigH(%ebx),%edx
+ movl %edx,FPU_accum_1
+
+ addl $1,FPU_result_2 /* Reflect the subtraction in the answer */
+ adcl $0,FPU_result_3
+
+LDo_3rd_div:
+ movl FPU_accum_0,%eax
+ movl FPU_accum_1,%edx
+ divl XsigH(%ebx)
+
+ movl %eax,FPU_result_1 /* Rough estimate of third word */
+
+ movl PARAM3,%esi /* pointer to answer */
+
+ movl FPU_result_1,%eax
+ movl %eax,XsigLL(%esi)
+ movl FPU_result_2,%eax
+ movl %eax,XsigL(%esi)
+ movl FPU_result_3,%eax
+ movl %eax,XsigH(%esi)
+
+L_exit:
+ popl %ebx
+ popl %edi
+ popl %esi
+
+ leave
+ ret
+
+
+#ifdef PARANOID
+/* The logic is wrong if we got here */
+L_bugged:
+ pushl EX_INTERNAL|0x240
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_bugged_1:
+ pushl EX_INTERNAL|0x241
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_bugged_2:
+ pushl EX_INTERNAL|0x242
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+#endif /* PARANOID */
diff --git a/arch/i386/math-emu/div_small.S b/arch/i386/math-emu/div_small.S
new file mode 100644
index 0000000..4709962
--- /dev/null
+++ b/arch/i386/math-emu/div_small.S
@@ -0,0 +1,47 @@
+ .file "div_small.S"
+/*---------------------------------------------------------------------------+
+ | div_small.S |
+ | |
+ | Divide a 64 bit integer by a 32 bit integer & return remainder. |
+ | |
+ | Copyright (C) 1992,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | unsigned long FPU_div_small(unsigned long long *x, unsigned long y) |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+
+.text
+ENTRY(FPU_div_small)
+ pushl %ebp
+ movl %esp,%ebp
+
+ pushl %esi
+
+ movl PARAM1,%esi /* pointer to num */
+ movl PARAM2,%ecx /* The denominator */
+
+ movl 4(%esi),%eax /* Get the current num msw */
+ xorl %edx,%edx
+ divl %ecx
+
+ movl %eax,4(%esi)
+
+ movl (%esi),%eax /* Get the num lsw */
+ divl %ecx
+
+ movl %eax,(%esi)
+
+ movl %edx,%eax /* Return the remainder in eax */
+
+ popl %esi
+
+ leave
+ ret
+
diff --git a/arch/i386/math-emu/errors.c b/arch/i386/math-emu/errors.c
new file mode 100644
index 0000000..a1b0d22
--- /dev/null
+++ b/arch/i386/math-emu/errors.c
@@ -0,0 +1,739 @@
+/*---------------------------------------------------------------------------+
+ | errors.c |
+ | |
+ | The error handling functions for wm-FPU-emu |
+ | |
+ | Copyright (C) 1992,1993,1994,1996 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+#include <linux/signal.h>
+
+#include <asm/uaccess.h>
+
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "exception.h"
+#include "status_w.h"
+#include "control_w.h"
+#include "reg_constant.h"
+#include "version.h"
+
+/* */
+#undef PRINT_MESSAGES
+/* */
+
+
+#if 0
+void Un_impl(void)
+{
+ u_char byte1, FPU_modrm;
+ unsigned long address = FPU_ORIG_EIP;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* No need to check access_ok(), we have previously fetched these bytes. */
+ printk("Unimplemented FPU Opcode at eip=%p : ", (void __user *) address);
+ if ( FPU_CS == __USER_CS )
+ {
+ while ( 1 )
+ {
+ FPU_get_user(byte1, (u_char __user *) address);
+ if ( (byte1 & 0xf8) == 0xd8 ) break;
+ printk("[%02x]", byte1);
+ address++;
+ }
+ printk("%02x ", byte1);
+ FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
+
+ if (FPU_modrm >= 0300)
+ printk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
+ else
+ printk("/%d\n", (FPU_modrm >> 3) & 7);
+ }
+ else
+ {
+ printk("cs selector = %04x\n", FPU_CS);
+ }
+
+ RE_ENTRANT_CHECK_ON;
+
+ EXCEPTION(EX_Invalid);
+
+}
+#endif /* 0 */
+
+
+/*
+ Called for opcodes which are illegal and which are known to result in a
+ SIGILL with a real 80486.
+ */
+void FPU_illegal(void)
+{
+ math_abort(FPU_info,SIGILL);
+}
+
+
+
+void FPU_printall(void)
+{
+ int i;
+ static const char *tag_desc[] = { "Valid", "Zero", "ERROR", "Empty",
+ "DeNorm", "Inf", "NaN" };
+ u_char byte1, FPU_modrm;
+ unsigned long address = FPU_ORIG_EIP;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* No need to check access_ok(), we have previously fetched these bytes. */
+ printk("At %p:", (void *) address);
+ if ( FPU_CS == __USER_CS )
+ {
+#define MAX_PRINTED_BYTES 20
+ for ( i = 0; i < MAX_PRINTED_BYTES; i++ )
+ {
+ FPU_get_user(byte1, (u_char __user *) address);
+ if ( (byte1 & 0xf8) == 0xd8 )
+ {
+ printk(" %02x", byte1);
+ break;
+ }
+ printk(" [%02x]", byte1);
+ address++;
+ }
+ if ( i == MAX_PRINTED_BYTES )
+ printk(" [more..]\n");
+ else
+ {
+ FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
+
+ if (FPU_modrm >= 0300)
+ printk(" %02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
+ else
+ printk(" /%d, mod=%d rm=%d\n",
+ (FPU_modrm >> 3) & 7, (FPU_modrm >> 6) & 3, FPU_modrm & 7);
+ }
+ }
+ else
+ {
+ printk("%04x\n", FPU_CS);
+ }
+
+ partial_status = status_word();
+
+#ifdef DEBUGGING
+if ( partial_status & SW_Backward ) printk("SW: backward compatibility\n");
+if ( partial_status & SW_C3 ) printk("SW: condition bit 3\n");
+if ( partial_status & SW_C2 ) printk("SW: condition bit 2\n");
+if ( partial_status & SW_C1 ) printk("SW: condition bit 1\n");
+if ( partial_status & SW_C0 ) printk("SW: condition bit 0\n");
+if ( partial_status & SW_Summary ) printk("SW: exception summary\n");
+if ( partial_status & SW_Stack_Fault ) printk("SW: stack fault\n");
+if ( partial_status & SW_Precision ) printk("SW: loss of precision\n");
+if ( partial_status & SW_Underflow ) printk("SW: underflow\n");
+if ( partial_status & SW_Overflow ) printk("SW: overflow\n");
+if ( partial_status & SW_Zero_Div ) printk("SW: divide by zero\n");
+if ( partial_status & SW_Denorm_Op ) printk("SW: denormalized operand\n");
+if ( partial_status & SW_Invalid ) printk("SW: invalid operation\n");
+#endif /* DEBUGGING */
+
+ printk(" SW: b=%d st=%ld es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n",
+ partial_status & 0x8000 ? 1 : 0, /* busy */
+ (partial_status & 0x3800) >> 11, /* stack top pointer */
+ partial_status & 0x80 ? 1 : 0, /* Error summary status */
+ partial_status & 0x40 ? 1 : 0, /* Stack flag */
+ partial_status & SW_C3?1:0, partial_status & SW_C2?1:0, /* cc */
+ partial_status & SW_C1?1:0, partial_status & SW_C0?1:0, /* cc */
+ partial_status & SW_Precision?1:0, partial_status & SW_Underflow?1:0,
+ partial_status & SW_Overflow?1:0, partial_status & SW_Zero_Div?1:0,
+ partial_status & SW_Denorm_Op?1:0, partial_status & SW_Invalid?1:0);
+
+printk(" CW: ic=%d rc=%ld%ld pc=%ld%ld iem=%d ef=%d%d%d%d%d%d\n",
+ control_word & 0x1000 ? 1 : 0,
+ (control_word & 0x800) >> 11, (control_word & 0x400) >> 10,
+ (control_word & 0x200) >> 9, (control_word & 0x100) >> 8,
+ control_word & 0x80 ? 1 : 0,
+ control_word & SW_Precision?1:0, control_word & SW_Underflow?1:0,
+ control_word & SW_Overflow?1:0, control_word & SW_Zero_Div?1:0,
+ control_word & SW_Denorm_Op?1:0, control_word & SW_Invalid?1:0);
+
+ for ( i = 0; i < 8; i++ )
+ {
+ FPU_REG *r = &st(i);
+ u_char tagi = FPU_gettagi(i);
+ switch (tagi)
+ {
+ case TAG_Empty:
+ continue;
+ break;
+ case TAG_Zero:
+ case TAG_Special:
+ tagi = FPU_Special(r);
+ case TAG_Valid:
+ printk("st(%d) %c .%04lx %04lx %04lx %04lx e%+-6d ", i,
+ getsign(r) ? '-' : '+',
+ (long)(r->sigh >> 16),
+ (long)(r->sigh & 0xFFFF),
+ (long)(r->sigl >> 16),
+ (long)(r->sigl & 0xFFFF),
+ exponent(r) - EXP_BIAS + 1);
+ break;
+ default:
+ printk("Whoops! Error in errors.c: tag%d is %d ", i, tagi);
+ continue;
+ break;
+ }
+ printk("%s\n", tag_desc[(int) (unsigned) tagi]);
+ }
+
+ RE_ENTRANT_CHECK_ON;
+
+}
+
+static struct {
+ int type;
+ const char *name;
+} exception_names[] = {
+ { EX_StackOver, "stack overflow" },
+ { EX_StackUnder, "stack underflow" },
+ { EX_Precision, "loss of precision" },
+ { EX_Underflow, "underflow" },
+ { EX_Overflow, "overflow" },
+ { EX_ZeroDiv, "divide by zero" },
+ { EX_Denormal, "denormalized operand" },
+ { EX_Invalid, "invalid operation" },
+ { EX_INTERNAL, "INTERNAL BUG in "FPU_VERSION },
+ { 0, NULL }
+};
+
+/*
+ EX_INTERNAL is always given with a code which indicates where the
+ error was detected.
+
+ Internal error types:
+ 0x14 in fpu_etc.c
+ 0x1nn in a *.c file:
+ 0x101 in reg_add_sub.c
+ 0x102 in reg_mul.c
+ 0x104 in poly_atan.c
+ 0x105 in reg_mul.c
+ 0x107 in fpu_trig.c
+ 0x108 in reg_compare.c
+ 0x109 in reg_compare.c
+ 0x110 in reg_add_sub.c
+ 0x111 in fpe_entry.c
+ 0x112 in fpu_trig.c
+ 0x113 in errors.c
+ 0x115 in fpu_trig.c
+ 0x116 in fpu_trig.c
+ 0x117 in fpu_trig.c
+ 0x118 in fpu_trig.c
+ 0x119 in fpu_trig.c
+ 0x120 in poly_atan.c
+ 0x121 in reg_compare.c
+ 0x122 in reg_compare.c
+ 0x123 in reg_compare.c
+ 0x125 in fpu_trig.c
+ 0x126 in fpu_entry.c
+ 0x127 in poly_2xm1.c
+ 0x128 in fpu_entry.c
+ 0x129 in fpu_entry.c
+ 0x130 in get_address.c
+ 0x131 in get_address.c
+ 0x132 in get_address.c
+ 0x133 in get_address.c
+ 0x140 in load_store.c
+ 0x141 in load_store.c
+ 0x150 in poly_sin.c
+ 0x151 in poly_sin.c
+ 0x160 in reg_ld_str.c
+ 0x161 in reg_ld_str.c
+ 0x162 in reg_ld_str.c
+ 0x163 in reg_ld_str.c
+ 0x164 in reg_ld_str.c
+ 0x170 in fpu_tags.c
+ 0x171 in fpu_tags.c
+ 0x172 in fpu_tags.c
+ 0x180 in reg_convert.c
+ 0x2nn in an *.S file:
+ 0x201 in reg_u_add.S
+ 0x202 in reg_u_div.S
+ 0x203 in reg_u_div.S
+ 0x204 in reg_u_div.S
+ 0x205 in reg_u_mul.S
+ 0x206 in reg_u_sub.S
+ 0x207 in wm_sqrt.S
+ 0x208 in reg_div.S
+ 0x209 in reg_u_sub.S
+ 0x210 in reg_u_sub.S
+ 0x211 in reg_u_sub.S
+ 0x212 in reg_u_sub.S
+ 0x213 in wm_sqrt.S
+ 0x214 in wm_sqrt.S
+ 0x215 in wm_sqrt.S
+ 0x220 in reg_norm.S
+ 0x221 in reg_norm.S
+ 0x230 in reg_round.S
+ 0x231 in reg_round.S
+ 0x232 in reg_round.S
+ 0x233 in reg_round.S
+ 0x234 in reg_round.S
+ 0x235 in reg_round.S
+ 0x236 in reg_round.S
+ 0x240 in div_Xsig.S
+ 0x241 in div_Xsig.S
+ 0x242 in div_Xsig.S
+ */
+
+asmlinkage void FPU_exception(int n)
+{
+ int i, int_type;
+
+ int_type = 0; /* Needed only to stop compiler warnings */
+ if ( n & EX_INTERNAL )
+ {
+ int_type = n - EX_INTERNAL;
+ n = EX_INTERNAL;
+ /* Set lots of exception bits! */
+ partial_status |= (SW_Exc_Mask | SW_Summary | SW_Backward);
+ }
+ else
+ {
+ /* Extract only the bits which we use to set the status word */
+ n &= (SW_Exc_Mask);
+ /* Set the corresponding exception bit */
+ partial_status |= n;
+ /* Set summary bits iff exception isn't masked */
+ if ( partial_status & ~control_word & CW_Exceptions )
+ partial_status |= (SW_Summary | SW_Backward);
+ if ( n & (SW_Stack_Fault | EX_Precision) )
+ {
+ if ( !(n & SW_C1) )
+ /* This bit distinguishes over- from underflow for a stack fault,
+ and roundup from round-down for precision loss. */
+ partial_status &= ~SW_C1;
+ }
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ if ( (~control_word & n & CW_Exceptions) || (n == EX_INTERNAL) )
+ {
+#ifdef PRINT_MESSAGES
+ /* My message from the sponsor */
+ printk(FPU_VERSION" "__DATE__" (C) W. Metzenthen.\n");
+#endif /* PRINT_MESSAGES */
+
+ /* Get a name string for error reporting */
+ for (i=0; exception_names[i].type; i++)
+ if ( (exception_names[i].type & n) == exception_names[i].type )
+ break;
+
+ if (exception_names[i].type)
+ {
+#ifdef PRINT_MESSAGES
+ printk("FP Exception: %s!\n", exception_names[i].name);
+#endif /* PRINT_MESSAGES */
+ }
+ else
+ printk("FPU emulator: Unknown Exception: 0x%04x!\n", n);
+
+ if ( n == EX_INTERNAL )
+ {
+ printk("FPU emulator: Internal error type 0x%04x\n", int_type);
+ FPU_printall();
+ }
+#ifdef PRINT_MESSAGES
+ else
+ FPU_printall();
+#endif /* PRINT_MESSAGES */
+
+ /*
+ * The 80486 generates an interrupt on the next non-control FPU
+ * instruction. So we need some means of flagging it.
+ * We use the ES (Error Summary) bit for this.
+ */
+ }
+ RE_ENTRANT_CHECK_ON;
+
+#ifdef __DEBUG__
+ math_abort(FPU_info,SIGFPE);
+#endif /* __DEBUG__ */
+
+}
+
+
+/* Real operation attempted on a NaN. */
+/* Returns < 0 if the exception is unmasked */
+int real_1op_NaN(FPU_REG *a)
+{
+ int signalling, isNaN;
+
+ isNaN = (exponent(a) == EXP_OVER) && (a->sigh & 0x80000000);
+
+ /* The default result for the case of two "equal" NaNs (signs may
+ differ) is chosen to reproduce 80486 behaviour */
+ signalling = isNaN && !(a->sigh & 0x40000000);
+
+ if ( !signalling )
+ {
+ if ( !isNaN ) /* pseudo-NaN, or other unsupported? */
+ {
+ if ( control_word & CW_Invalid )
+ {
+ /* Masked response */
+ reg_copy(&CONST_QNaN, a);
+ }
+ EXCEPTION(EX_Invalid);
+ return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
+ }
+ return TAG_Special;
+ }
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ if ( !(a->sigh & 0x80000000) ) /* pseudo-NaN ? */
+ {
+ reg_copy(&CONST_QNaN, a);
+ }
+ /* ensure a Quiet NaN */
+ a->sigh |= 0x40000000;
+ }
+
+ EXCEPTION(EX_Invalid);
+
+ return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
+}
+
+
+/* Real operation attempted on two operands, one a NaN. */
+/* Returns < 0 if the exception is unmasked */
+int real_2op_NaN(FPU_REG const *b, u_char tagb,
+ int deststnr,
+ FPU_REG const *defaultNaN)
+{
+ FPU_REG *dest = &st(deststnr);
+ FPU_REG const *a = dest;
+ u_char taga = FPU_gettagi(deststnr);
+ FPU_REG const *x;
+ int signalling, unsupported;
+
+ if ( taga == TAG_Special )
+ taga = FPU_Special(a);
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+
+ /* TW_NaN is also used for unsupported data types. */
+ unsupported = ((taga == TW_NaN)
+ && !((exponent(a) == EXP_OVER) && (a->sigh & 0x80000000)))
+ || ((tagb == TW_NaN)
+ && !((exponent(b) == EXP_OVER) && (b->sigh & 0x80000000)));
+ if ( unsupported )
+ {
+ if ( control_word & CW_Invalid )
+ {
+ /* Masked response */
+ FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
+ }
+ EXCEPTION(EX_Invalid);
+ return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
+ }
+
+ if (taga == TW_NaN)
+ {
+ x = a;
+ if (tagb == TW_NaN)
+ {
+ signalling = !(a->sigh & b->sigh & 0x40000000);
+ if ( significand(b) > significand(a) )
+ x = b;
+ else if ( significand(b) == significand(a) )
+ {
+ /* The default result for the case of two "equal" NaNs (signs may
+ differ) is chosen to reproduce 80486 behaviour */
+ x = defaultNaN;
+ }
+ }
+ else
+ {
+ /* return the quiet version of the NaN in a */
+ signalling = !(a->sigh & 0x40000000);
+ }
+ }
+ else
+#ifdef PARANOID
+ if (tagb == TW_NaN)
+#endif /* PARANOID */
+ {
+ signalling = !(b->sigh & 0x40000000);
+ x = b;
+ }
+#ifdef PARANOID
+ else
+ {
+ signalling = 0;
+ EXCEPTION(EX_INTERNAL|0x113);
+ x = &CONST_QNaN;
+ }
+#endif /* PARANOID */
+
+ if ( (!signalling) || (control_word & CW_Invalid) )
+ {
+ if ( ! x )
+ x = b;
+
+ if ( !(x->sigh & 0x80000000) ) /* pseudo-NaN ? */
+ x = &CONST_QNaN;
+
+ FPU_copy_to_regi(x, TAG_Special, deststnr);
+
+ if ( !signalling )
+ return TAG_Special;
+
+ /* ensure a Quiet NaN */
+ dest->sigh |= 0x40000000;
+ }
+
+ EXCEPTION(EX_Invalid);
+
+ return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
+}
+
+
+/* Invalid arith operation on Valid registers */
+/* Returns < 0 if the exception is unmasked */
+asmlinkage int arith_invalid(int deststnr)
+{
+
+ EXCEPTION(EX_Invalid);
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
+ }
+
+ return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Valid;
+
+}
+
+
+/* Divide a finite number by zero */
+asmlinkage int FPU_divide_by_zero(int deststnr, u_char sign)
+{
+ FPU_REG *dest = &st(deststnr);
+ int tag = TAG_Valid;
+
+ if ( control_word & CW_ZeroDiv )
+ {
+ /* The masked response */
+ FPU_copy_to_regi(&CONST_INF, TAG_Special, deststnr);
+ setsign(dest, sign);
+ tag = TAG_Special;
+ }
+
+ EXCEPTION(EX_ZeroDiv);
+
+ return (!(control_word & CW_ZeroDiv) ? FPU_Exception : 0) | tag;
+
+}
+
+
+/* This may be called often, so keep it lean */
+int set_precision_flag(int flags)
+{
+ if ( control_word & CW_Precision )
+ {
+ partial_status &= ~(SW_C1 & flags);
+ partial_status |= flags; /* The masked response */
+ return 0;
+ }
+ else
+ {
+ EXCEPTION(flags);
+ return 1;
+ }
+}
+
+
+/* This may be called often, so keep it lean */
+asmlinkage void set_precision_flag_up(void)
+{
+ if ( control_word & CW_Precision )
+ partial_status |= (SW_Precision | SW_C1); /* The masked response */
+ else
+ EXCEPTION(EX_Precision | SW_C1);
+}
+
+
+/* This may be called often, so keep it lean */
+asmlinkage void set_precision_flag_down(void)
+{
+ if ( control_word & CW_Precision )
+ { /* The masked response */
+ partial_status &= ~SW_C1;
+ partial_status |= SW_Precision;
+ }
+ else
+ EXCEPTION(EX_Precision);
+}
+
+
+asmlinkage int denormal_operand(void)
+{
+ if ( control_word & CW_Denormal )
+ { /* The masked response */
+ partial_status |= SW_Denorm_Op;
+ return TAG_Special;
+ }
+ else
+ {
+ EXCEPTION(EX_Denormal);
+ return TAG_Special | FPU_Exception;
+ }
+}
+
+
+asmlinkage int arith_overflow(FPU_REG *dest)
+{
+ int tag = TAG_Valid;
+
+ if ( control_word & CW_Overflow )
+ {
+ /* The masked response */
+/* ###### The response here depends upon the rounding mode */
+ reg_copy(&CONST_INF, dest);
+ tag = TAG_Special;
+ }
+ else
+ {
+ /* Subtract the magic number from the exponent */
+ addexponent(dest, (-3 * (1 << 13)));
+ }
+
+ EXCEPTION(EX_Overflow);
+ if ( control_word & CW_Overflow )
+ {
+ /* The overflow exception is masked. */
+ /* By definition, precision is lost.
+ The roundup bit (C1) is also set because we have
+ "rounded" upwards to Infinity. */
+ EXCEPTION(EX_Precision | SW_C1);
+ return tag;
+ }
+
+ return tag;
+
+}
+
+
+asmlinkage int arith_underflow(FPU_REG *dest)
+{
+ int tag = TAG_Valid;
+
+ if ( control_word & CW_Underflow )
+ {
+ /* The masked response */
+ if ( exponent16(dest) <= EXP_UNDER - 63 )
+ {
+ reg_copy(&CONST_Z, dest);
+ partial_status &= ~SW_C1; /* Round down. */
+ tag = TAG_Zero;
+ }
+ else
+ {
+ stdexp(dest);
+ }
+ }
+ else
+ {
+ /* Add the magic number to the exponent. */
+ addexponent(dest, (3 * (1 << 13)) + EXTENDED_Ebias);
+ }
+
+ EXCEPTION(EX_Underflow);
+ if ( control_word & CW_Underflow )
+ {
+ /* The underflow exception is masked. */
+ EXCEPTION(EX_Precision);
+ return tag;
+ }
+
+ return tag;
+
+}
+
+
+void FPU_stack_overflow(void)
+{
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ top--;
+ FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
+ }
+
+ EXCEPTION(EX_StackOver);
+
+ return;
+
+}
+
+
+void FPU_stack_underflow(void)
+{
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
+ }
+
+ EXCEPTION(EX_StackUnder);
+
+ return;
+
+}
+
+
+void FPU_stack_underflow_i(int i)
+{
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
+ }
+
+ EXCEPTION(EX_StackUnder);
+
+ return;
+
+}
+
+
+void FPU_stack_underflow_pop(int i)
+{
+
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
+ FPU_pop();
+ }
+
+ EXCEPTION(EX_StackUnder);
+
+ return;
+
+}
+
diff --git a/arch/i386/math-emu/exception.h b/arch/i386/math-emu/exception.h
new file mode 100644
index 0000000..b463f21
--- /dev/null
+++ b/arch/i386/math-emu/exception.h
@@ -0,0 +1,53 @@
+/*---------------------------------------------------------------------------+
+ | exception.h |
+ | |
+ | Copyright (C) 1992 W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@vaxc.cc.monash.edu.au |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _EXCEPTION_H_
+#define _EXCEPTION_H_
+
+
+#ifdef __ASSEMBLY__
+#define Const_(x) $##x
+#else
+#define Const_(x) x
+#endif
+
+#ifndef SW_C1
+#include "fpu_emu.h"
+#endif /* SW_C1 */
+
+#define FPU_BUSY Const_(0x8000) /* FPU busy bit (8087 compatibility) */
+#define EX_ErrorSummary Const_(0x0080) /* Error summary status */
+/* Special exceptions: */
+#define EX_INTERNAL Const_(0x8000) /* Internal error in wm-FPU-emu */
+#define EX_StackOver Const_(0x0041|SW_C1) /* stack overflow */
+#define EX_StackUnder Const_(0x0041) /* stack underflow */
+/* Exception flags: */
+#define EX_Precision Const_(0x0020) /* loss of precision */
+#define EX_Underflow Const_(0x0010) /* underflow */
+#define EX_Overflow Const_(0x0008) /* overflow */
+#define EX_ZeroDiv Const_(0x0004) /* divide by zero */
+#define EX_Denormal Const_(0x0002) /* denormalized operand */
+#define EX_Invalid Const_(0x0001) /* invalid operation */
+
+
+#define PRECISION_LOST_UP Const_((EX_Precision | SW_C1))
+#define PRECISION_LOST_DOWN Const_(EX_Precision)
+
+
+#ifndef __ASSEMBLY__
+
+#ifdef DEBUG
+#define EXCEPTION(x) { printk("exception in %s at line %d\n", \
+ __FILE__, __LINE__); FPU_exception(x); }
+#else
+#define EXCEPTION(x) FPU_exception(x)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _EXCEPTION_H_ */
diff --git a/arch/i386/math-emu/fpu_arith.c b/arch/i386/math-emu/fpu_arith.c
new file mode 100644
index 0000000..6972dec
--- /dev/null
+++ b/arch/i386/math-emu/fpu_arith.c
@@ -0,0 +1,174 @@
+/*---------------------------------------------------------------------------+
+ | fpu_arith.c |
+ | |
+ | Code to implement the FPU register/register arithmetic instructions |
+ | |
+ | Copyright (C) 1992,1993,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+#include "status_w.h"
+
+
+void fadd__(void)
+{
+ /* fadd st,st(i) */
+ int i = FPU_rm;
+ clear_C1();
+ FPU_add(&st(i), FPU_gettagi(i), 0, control_word);
+}
+
+
+void fmul__(void)
+{
+ /* fmul st,st(i) */
+ int i = FPU_rm;
+ clear_C1();
+ FPU_mul(&st(i), FPU_gettagi(i), 0, control_word);
+}
+
+
+
+void fsub__(void)
+{
+ /* fsub st,st(i) */
+ clear_C1();
+ FPU_sub(0, FPU_rm, control_word);
+}
+
+
+void fsubr_(void)
+{
+ /* fsubr st,st(i) */
+ clear_C1();
+ FPU_sub(REV, FPU_rm, control_word);
+}
+
+
+void fdiv__(void)
+{
+ /* fdiv st,st(i) */
+ clear_C1();
+ FPU_div(0, FPU_rm, control_word);
+}
+
+
+void fdivr_(void)
+{
+ /* fdivr st,st(i) */
+ clear_C1();
+ FPU_div(REV, FPU_rm, control_word);
+}
+
+
+
+void fadd_i(void)
+{
+ /* fadd st(i),st */
+ int i = FPU_rm;
+ clear_C1();
+ FPU_add(&st(i), FPU_gettagi(i), i, control_word);
+}
+
+
+void fmul_i(void)
+{
+ /* fmul st(i),st */
+ clear_C1();
+ FPU_mul(&st(0), FPU_gettag0(), FPU_rm, control_word);
+}
+
+
+void fsubri(void)
+{
+ /* fsubr st(i),st */
+ clear_C1();
+ FPU_sub(DEST_RM, FPU_rm, control_word);
+}
+
+
+void fsub_i(void)
+{
+ /* fsub st(i),st */
+ clear_C1();
+ FPU_sub(REV|DEST_RM, FPU_rm, control_word);
+}
+
+
+void fdivri(void)
+{
+ /* fdivr st(i),st */
+ clear_C1();
+ FPU_div(DEST_RM, FPU_rm, control_word);
+}
+
+
+void fdiv_i(void)
+{
+ /* fdiv st(i),st */
+ clear_C1();
+ FPU_div(REV|DEST_RM, FPU_rm, control_word);
+}
+
+
+
+void faddp_(void)
+{
+ /* faddp st(i),st */
+ int i = FPU_rm;
+ clear_C1();
+ if ( FPU_add(&st(i), FPU_gettagi(i), i, control_word) >= 0 )
+ FPU_pop();
+}
+
+
+void fmulp_(void)
+{
+ /* fmulp st(i),st */
+ clear_C1();
+ if ( FPU_mul(&st(0), FPU_gettag0(), FPU_rm, control_word) >= 0 )
+ FPU_pop();
+}
+
+
+
+void fsubrp(void)
+{
+ /* fsubrp st(i),st */
+ clear_C1();
+ if ( FPU_sub(DEST_RM, FPU_rm, control_word) >= 0 )
+ FPU_pop();
+}
+
+
+void fsubp_(void)
+{
+ /* fsubp st(i),st */
+ clear_C1();
+ if ( FPU_sub(REV|DEST_RM, FPU_rm, control_word) >= 0 )
+ FPU_pop();
+}
+
+
+void fdivrp(void)
+{
+ /* fdivrp st(i),st */
+ clear_C1();
+ if ( FPU_div(DEST_RM, FPU_rm, control_word) >= 0 )
+ FPU_pop();
+}
+
+
+void fdivp_(void)
+{
+ /* fdivp st(i),st */
+ clear_C1();
+ if ( FPU_div(REV|DEST_RM, FPU_rm, control_word) >= 0 )
+ FPU_pop();
+}
diff --git a/arch/i386/math-emu/fpu_asm.h b/arch/i386/math-emu/fpu_asm.h
new file mode 100644
index 0000000..9ba1241
--- /dev/null
+++ b/arch/i386/math-emu/fpu_asm.h
@@ -0,0 +1,32 @@
+/*---------------------------------------------------------------------------+
+ | fpu_asm.h |
+ | |
+ | Copyright (C) 1992,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _FPU_ASM_H_
+#define _FPU_ASM_H_
+
+#include <linux/linkage.h>
+
+#define EXCEPTION FPU_exception
+
+
+#define PARAM1 8(%ebp)
+#define PARAM2 12(%ebp)
+#define PARAM3 16(%ebp)
+#define PARAM4 20(%ebp)
+#define PARAM5 24(%ebp)
+#define PARAM6 28(%ebp)
+#define PARAM7 32(%ebp)
+
+#define SIGL_OFFSET 0
+#define EXP(x) 8(x)
+#define SIG(x) SIGL_OFFSET##(x)
+#define SIGL(x) SIGL_OFFSET##(x)
+#define SIGH(x) 4(x)
+
+#endif /* _FPU_ASM_H_ */
diff --git a/arch/i386/math-emu/fpu_aux.c b/arch/i386/math-emu/fpu_aux.c
new file mode 100644
index 0000000..20886cf
--- /dev/null
+++ b/arch/i386/math-emu/fpu_aux.c
@@ -0,0 +1,204 @@
+/*---------------------------------------------------------------------------+
+ | fpu_aux.c |
+ | |
+ | Code to implement some of the FPU auxiliary instructions. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+#include "status_w.h"
+#include "control_w.h"
+
+
+static void fnop(void)
+{
+}
+
+static void fclex(void)
+{
+ partial_status &= ~(SW_Backward|SW_Summary|SW_Stack_Fault|SW_Precision|
+ SW_Underflow|SW_Overflow|SW_Zero_Div|SW_Denorm_Op|
+ SW_Invalid);
+ no_ip_update = 1;
+}
+
+/* Needs to be externally visible */
+void finit(void)
+{
+ control_word = 0x037f;
+ partial_status = 0;
+ top = 0; /* We don't keep top in the status word internally. */
+ fpu_tag_word = 0xffff;
+ /* The behaviour is different from that detailed in
+ Section 15.1.6 of the Intel manual */
+ operand_address.offset = 0;
+ operand_address.selector = 0;
+ instruction_address.offset = 0;
+ instruction_address.selector = 0;
+ instruction_address.opcode = 0;
+ no_ip_update = 1;
+}
+
+/*
+ * These are nops on the i387..
+ */
+#define feni fnop
+#define fdisi fnop
+#define fsetpm fnop
+
+static FUNC const finit_table[] = {
+ feni, fdisi, fclex, finit,
+ fsetpm, FPU_illegal, FPU_illegal, FPU_illegal
+};
+
+void finit_(void)
+{
+ (finit_table[FPU_rm])();
+}
+
+
+static void fstsw_ax(void)
+{
+ *(short *) &FPU_EAX = status_word();
+ no_ip_update = 1;
+}
+
+static FUNC const fstsw_table[] = {
+ fstsw_ax, FPU_illegal, FPU_illegal, FPU_illegal,
+ FPU_illegal, FPU_illegal, FPU_illegal, FPU_illegal
+};
+
+void fstsw_(void)
+{
+ (fstsw_table[FPU_rm])();
+}
+
+
+static FUNC const fp_nop_table[] = {
+ fnop, FPU_illegal, FPU_illegal, FPU_illegal,
+ FPU_illegal, FPU_illegal, FPU_illegal, FPU_illegal
+};
+
+void fp_nop(void)
+{
+ (fp_nop_table[FPU_rm])();
+}
+
+
+void fld_i_(void)
+{
+ FPU_REG *st_new_ptr;
+ int i;
+ u_char tag;
+
+ if ( STACK_OVERFLOW )
+ { FPU_stack_overflow(); return; }
+
+ /* fld st(i) */
+ i = FPU_rm;
+ if ( NOT_EMPTY(i) )
+ {
+ reg_copy(&st(i), st_new_ptr);
+ tag = FPU_gettagi(i);
+ push();
+ FPU_settag0(tag);
+ }
+ else
+ {
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_stack_underflow();
+ }
+ else
+ EXCEPTION(EX_StackUnder);
+ }
+
+}
+
+
+void fxch_i(void)
+{
+ /* fxch st(i) */
+ FPU_REG t;
+ int i = FPU_rm;
+ FPU_REG *st0_ptr = &st(0), *sti_ptr = &st(i);
+ long tag_word = fpu_tag_word;
+ int regnr = top & 7, regnri = ((regnr + i) & 7);
+ u_char st0_tag = (tag_word >> (regnr*2)) & 3;
+ u_char sti_tag = (tag_word >> (regnri*2)) & 3;
+
+ if ( st0_tag == TAG_Empty )
+ {
+ if ( sti_tag == TAG_Empty )
+ {
+ FPU_stack_underflow();
+ FPU_stack_underflow_i(i);
+ return;
+ }
+ if ( control_word & CW_Invalid )
+ {
+ /* Masked response */
+ FPU_copy_to_reg0(sti_ptr, sti_tag);
+ }
+ FPU_stack_underflow_i(i);
+ return;
+ }
+ if ( sti_tag == TAG_Empty )
+ {
+ if ( control_word & CW_Invalid )
+ {
+ /* Masked response */
+ FPU_copy_to_regi(st0_ptr, st0_tag, i);
+ }
+ FPU_stack_underflow();
+ return;
+ }
+ clear_C1();
+
+ reg_copy(st0_ptr, &t);
+ reg_copy(sti_ptr, st0_ptr);
+ reg_copy(&t, sti_ptr);
+
+ tag_word &= ~(3 << (regnr*2)) & ~(3 << (regnri*2));
+ tag_word |= (sti_tag << (regnr*2)) | (st0_tag << (regnri*2));
+ fpu_tag_word = tag_word;
+}
+
+
+void ffree_(void)
+{
+ /* ffree st(i) */
+ FPU_settagi(FPU_rm, TAG_Empty);
+}
+
+
+void ffreep(void)
+{
+ /* ffree st(i) + pop - unofficial code */
+ FPU_settagi(FPU_rm, TAG_Empty);
+ FPU_pop();
+}
+
+
+void fst_i_(void)
+{
+ /* fst st(i) */
+ FPU_copy_to_regi(&st(0), FPU_gettag0(), FPU_rm);
+}
+
+
+void fstp_i(void)
+{
+ /* fstp st(i) */
+ FPU_copy_to_regi(&st(0), FPU_gettag0(), FPU_rm);
+ FPU_pop();
+}
+
diff --git a/arch/i386/math-emu/fpu_emu.h b/arch/i386/math-emu/fpu_emu.h
new file mode 100644
index 0000000..d62b20a
--- /dev/null
+++ b/arch/i386/math-emu/fpu_emu.h
@@ -0,0 +1,217 @@
+/*---------------------------------------------------------------------------+
+ | fpu_emu.h |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ +---------------------------------------------------------------------------*/
+
+
+#ifndef _FPU_EMU_H_
+#define _FPU_EMU_H_
+
+/*
+ * Define PECULIAR_486 to get a closer approximation to 80486 behaviour,
+ * rather than behaviour which appears to be cleaner.
+ * This is a matter of opinion: for all I know, the 80486 may simply
+ * be complying with the IEEE spec. Maybe one day I'll get to see the
+ * spec...
+ */
+#define PECULIAR_486
+
+#ifdef __ASSEMBLY__
+#include "fpu_asm.h"
+#define Const(x) $##x
+#else
+#define Const(x) x
+#endif
+
+#define EXP_BIAS Const(0)
+#define EXP_OVER Const(0x4000) /* smallest invalid large exponent */
+#define EXP_UNDER Const(-0x3fff) /* largest invalid small exponent */
+#define EXP_WAY_UNDER Const(-0x6000) /* Below the smallest denormal, but
+ still a 16 bit nr. */
+#define EXP_Infinity EXP_OVER
+#define EXP_NaN EXP_OVER
+
+#define EXTENDED_Ebias Const(0x3fff)
+#define EXTENDED_Emin (-0x3ffe) /* smallest valid exponent */
+
+#define SIGN_POS Const(0)
+#define SIGN_NEG Const(0x80)
+
+#define SIGN_Positive Const(0)
+#define SIGN_Negative Const(0x8000)
+
+
+/* Keep the order TAG_Valid, TAG_Zero, TW_Denormal */
+/* The following fold to 2 (Special) in the Tag Word */
+#define TW_Denormal Const(4) /* De-normal */
+#define TW_Infinity Const(5) /* + or - infinity */
+#define TW_NaN Const(6) /* Not a Number */
+#define TW_Unsupported Const(7) /* Not supported by an 80486 */
+
+#define TAG_Valid Const(0) /* valid */
+#define TAG_Zero Const(1) /* zero */
+#define TAG_Special Const(2) /* De-normal, + or - infinity,
+ or Not a Number */
+#define TAG_Empty Const(3) /* empty */
+
+#define LOADED_DATA Const(10101) /* Special st() number to identify
+ loaded data (not on stack). */
+
+/* A few flags (must be >= 0x10). */
+#define REV 0x10
+#define DEST_RM 0x20
+#define LOADED 0x40
+
+#define FPU_Exception Const(0x80000000) /* Added to tag returns. */
+
+
+#ifndef __ASSEMBLY__
+
+#include "fpu_system.h"
+
+#include <asm/sigcontext.h> /* for struct _fpstate */
+#include <asm/math_emu.h>
+#include <linux/linkage.h>
+
+/*
+#define RE_ENTRANT_CHECKING
+ */
+
+#ifdef RE_ENTRANT_CHECKING
+extern u_char emulating;
+# define RE_ENTRANT_CHECK_OFF emulating = 0
+# define RE_ENTRANT_CHECK_ON emulating = 1
+#else
+# define RE_ENTRANT_CHECK_OFF
+# define RE_ENTRANT_CHECK_ON
+#endif /* RE_ENTRANT_CHECKING */
+
+#define FWAIT_OPCODE 0x9b
+#define OP_SIZE_PREFIX 0x66
+#define ADDR_SIZE_PREFIX 0x67
+#define PREFIX_CS 0x2e
+#define PREFIX_DS 0x3e
+#define PREFIX_ES 0x26
+#define PREFIX_SS 0x36
+#define PREFIX_FS 0x64
+#define PREFIX_GS 0x65
+#define PREFIX_REPE 0xf3
+#define PREFIX_REPNE 0xf2
+#define PREFIX_LOCK 0xf0
+#define PREFIX_CS_ 1
+#define PREFIX_DS_ 2
+#define PREFIX_ES_ 3
+#define PREFIX_FS_ 4
+#define PREFIX_GS_ 5
+#define PREFIX_SS_ 6
+#define PREFIX_DEFAULT 7
+
+struct address {
+ unsigned int offset;
+ unsigned int selector:16;
+ unsigned int opcode:11;
+ unsigned int empty:5;
+};
+struct fpu__reg {
+ unsigned sigl;
+ unsigned sigh;
+ short exp;
+};
+
+typedef void (*FUNC)(void);
+typedef struct fpu__reg FPU_REG;
+typedef void (*FUNC_ST0)(FPU_REG *st0_ptr, u_char st0_tag);
+typedef struct { u_char address_size, operand_size, segment; }
+ overrides;
+/* This structure is 32 bits: */
+typedef struct { overrides override;
+ u_char default_mode; } fpu_addr_modes;
+/* PROTECTED has a restricted meaning in the emulator; it is used
+ to signal that the emulator needs to do special things to ensure
+ that protection is respected in a segmented model. */
+#define PROTECTED 4
+#define SIXTEEN 1 /* We rely upon this being 1 (true) */
+#define VM86 SIXTEEN
+#define PM16 (SIXTEEN | PROTECTED)
+#define SEG32 PROTECTED
+extern u_char const data_sizes_16[32];
+
+#define register_base ((u_char *) registers )
+#define fpu_register(x) ( * ((FPU_REG *)( register_base + 10 * (x & 7) )) )
+#define st(x) ( * ((FPU_REG *)( register_base + 10 * ((top+x) & 7) )) )
+
+#define STACK_OVERFLOW (FPU_stackoverflow(&st_new_ptr))
+#define NOT_EMPTY(i) (!FPU_empty_i(i))
+
+#define NOT_EMPTY_ST0 (st0_tag ^ TAG_Empty)
+
+#define poppop() { FPU_pop(); FPU_pop(); }
+
+/* push() does not affect the tags */
+#define push() { top--; }
+
+#define signbyte(a) (((u_char *)(a))[9])
+#define getsign(a) (signbyte(a) & 0x80)
+#define setsign(a,b) { if (b) signbyte(a) |= 0x80; else signbyte(a) &= 0x7f; }
+#define copysign(a,b) { if (getsign(a)) signbyte(b) |= 0x80; \
+ else signbyte(b) &= 0x7f; }
+#define changesign(a) { signbyte(a) ^= 0x80; }
+#define setpositive(a) { signbyte(a) &= 0x7f; }
+#define setnegative(a) { signbyte(a) |= 0x80; }
+#define signpositive(a) ( (signbyte(a) & 0x80) == 0 )
+#define signnegative(a) (signbyte(a) & 0x80)
+
+static inline void reg_copy(FPU_REG const *x, FPU_REG *y)
+{
+ *(short *)&(y->exp) = *(const short *)&(x->exp);
+ *(long long *)&(y->sigl) = *(const long long *)&(x->sigl);
+}
+
+#define exponent(x) (((*(short *)&((x)->exp)) & 0x7fff) - EXTENDED_Ebias)
+#define setexponentpos(x,y) { (*(short *)&((x)->exp)) = \
+ ((y) + EXTENDED_Ebias) & 0x7fff; }
+#define exponent16(x) (*(short *)&((x)->exp))
+#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); }
+#define addexponent(x,y) { (*(short *)&((x)->exp)) += (y); }
+#define stdexp(x) { (*(short *)&((x)->exp)) += EXTENDED_Ebias; }
+
+#define isdenormal(ptr) (exponent(ptr) == EXP_BIAS+EXP_UNDER)
+
+#define significand(x) ( ((unsigned long long *)&((x)->sigl))[0] )
+
+
+/*----- Prototypes for functions written in assembler -----*/
+/* extern void reg_move(FPU_REG *a, FPU_REG *b); */
+
+asmlinkage int FPU_normalize(FPU_REG *x);
+asmlinkage int FPU_normalize_nuo(FPU_REG *x);
+asmlinkage int FPU_u_sub(FPU_REG const *arg1, FPU_REG const *arg2,
+ FPU_REG *answ, unsigned int control_w, u_char sign,
+ int expa, int expb);
+asmlinkage int FPU_u_mul(FPU_REG const *arg1, FPU_REG const *arg2,
+ FPU_REG *answ, unsigned int control_w, u_char sign,
+ int expon);
+asmlinkage int FPU_u_div(FPU_REG const *arg1, FPU_REG const *arg2,
+ FPU_REG *answ, unsigned int control_w, u_char sign);
+asmlinkage int FPU_u_add(FPU_REG const *arg1, FPU_REG const *arg2,
+ FPU_REG *answ, unsigned int control_w, u_char sign,
+ int expa, int expb);
+asmlinkage int wm_sqrt(FPU_REG *n, int dummy1, int dummy2,
+ unsigned int control_w, u_char sign);
+asmlinkage unsigned FPU_shrx(void *l, unsigned x);
+asmlinkage unsigned FPU_shrxs(void *v, unsigned x);
+asmlinkage unsigned long FPU_div_small(unsigned long long *x, unsigned long y);
+asmlinkage int FPU_round(FPU_REG *arg, unsigned int extent, int dummy,
+ unsigned int control_w, u_char sign);
+
+#ifndef MAKING_PROTO
+#include "fpu_proto.h"
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _FPU_EMU_H_ */
diff --git a/arch/i386/math-emu/fpu_entry.c b/arch/i386/math-emu/fpu_entry.c
new file mode 100644
index 0000000..d93f16e
--- /dev/null
+++ b/arch/i386/math-emu/fpu_entry.c
@@ -0,0 +1,760 @@
+/*---------------------------------------------------------------------------+
+ | fpu_entry.c |
+ | |
+ | The entry functions for wm-FPU-emu |
+ | |
+ | Copyright (C) 1992,1993,1994,1996,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | See the files "README" and "COPYING" for further copyright and warranty |
+ | information. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | math_emulate(), restore_i387_soft() and save_i387_soft() are the only |
+ | entry points for wm-FPU-emu. |
+ +---------------------------------------------------------------------------*/
+
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "fpu_system.h"
+#include "fpu_emu.h"
+#include "exception.h"
+#include "control_w.h"
+#include "status_w.h"
+
+#define __BAD__ FPU_illegal /* Illegal on an 80486, causes SIGILL */
+
+#ifndef NO_UNDOC_CODE /* Un-documented FPU op-codes supported by default. */
+
+/* WARNING: These codes are not documented by Intel in their 80486 manual
+ and may not work on FPU clones or later Intel FPUs. */
+
+/* Changes to support the un-doc codes provided by Linus Torvalds. */
+
+#define _d9_d8_ fstp_i /* unofficial code (19) */
+#define _dc_d0_ fcom_st /* unofficial code (14) */
+#define _dc_d8_ fcompst /* unofficial code (1c) */
+#define _dd_c8_ fxch_i /* unofficial code (0d) */
+#define _de_d0_ fcompst /* unofficial code (16) */
+#define _df_c0_ ffreep /* unofficial code (07) ffree + pop */
+#define _df_c8_ fxch_i /* unofficial code (0f) */
+#define _df_d0_ fstp_i /* unofficial code (17) */
+#define _df_d8_ fstp_i /* unofficial code (1f) */
+
+static FUNC const st_instr_table[64] = {
+ fadd__, fld_i_, __BAD__, __BAD__, fadd_i, ffree_, faddp_, _df_c0_,
+ fmul__, fxch_i, __BAD__, __BAD__, fmul_i, _dd_c8_, fmulp_, _df_c8_,
+ fcom_st, fp_nop, __BAD__, __BAD__, _dc_d0_, fst_i_, _de_d0_, _df_d0_,
+ fcompst, _d9_d8_, __BAD__, __BAD__, _dc_d8_, fstp_i, fcompp, _df_d8_,
+ fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
+ fsubr_, fconst, fucompp, __BAD__, fsub_i, fucomp, fsubp_, __BAD__,
+ fdiv__, FPU_triga, __BAD__, __BAD__, fdivri, __BAD__, fdivrp, __BAD__,
+ fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
+};
+
+#else /* Support only documented FPU op-codes */
+
+static FUNC const st_instr_table[64] = {
+ fadd__, fld_i_, __BAD__, __BAD__, fadd_i, ffree_, faddp_, __BAD__,
+ fmul__, fxch_i, __BAD__, __BAD__, fmul_i, __BAD__, fmulp_, __BAD__,
+ fcom_st, fp_nop, __BAD__, __BAD__, __BAD__, fst_i_, __BAD__, __BAD__,
+ fcompst, __BAD__, __BAD__, __BAD__, __BAD__, fstp_i, fcompp, __BAD__,
+ fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
+ fsubr_, fconst, fucompp, __BAD__, fsub_i, fucomp, fsubp_, __BAD__,
+ fdiv__, FPU_triga, __BAD__, __BAD__, fdivri, __BAD__, fdivrp, __BAD__,
+ fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
+};
+
+#endif /* NO_UNDOC_CODE */
+
+
+#define _NONE_ 0 /* Take no special action */
+#define _REG0_ 1 /* Need to check for not empty st(0) */
+#define _REGI_ 2 /* Need to check for not empty st(0) and st(rm) */
+#define _REGi_ 0 /* Uses st(rm) */
+#define _PUSH_ 3 /* Need to check for space to push onto stack */
+#define _null_ 4 /* Function illegal or not implemented */
+#define _REGIi 5 /* Uses st(0) and st(rm), result to st(rm) */
+#define _REGIp 6 /* Uses st(0) and st(rm), result to st(rm) then pop */
+#define _REGIc 0 /* Compare st(0) and st(rm) */
+#define _REGIn 0 /* Uses st(0) and st(rm), but handle checks later */
+
+#ifndef NO_UNDOC_CODE
+
+/* Un-documented FPU op-codes supported by default. (see above) */
+
+static u_char const type_table[64] = {
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _REGi_,
+ _REGI_, _REGIn, _null_, _null_, _REGIi, _REGI_, _REGIp, _REGI_,
+ _REGIc, _NONE_, _null_, _null_, _REGIc, _REG0_, _REGIc, _REG0_,
+ _REGIc, _REG0_, _null_, _null_, _REGIc, _REG0_, _REGIc, _REG0_,
+ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
+ _REGI_, _NONE_, _REGIc, _null_, _REGIi, _REGIc, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
+};
+
+#else /* Support only documented FPU op-codes */
+
+static u_char const type_table[64] = {
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _null_,
+ _REGI_, _REGIn, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGIc, _NONE_, _null_, _null_, _null_, _REG0_, _null_, _null_,
+ _REGIc, _null_, _null_, _null_, _null_, _REG0_, _REGIc, _null_,
+ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
+ _REGI_, _NONE_, _REGIc, _null_, _REGIi, _REGIc, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
+};
+
+#endif /* NO_UNDOC_CODE */
+
+
+#ifdef RE_ENTRANT_CHECKING
+u_char emulating=0;
+#endif /* RE_ENTRANT_CHECKING */
+
+static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
+ overrides *override);
+
+asmlinkage void math_emulate(long arg)
+{
+ u_char FPU_modrm, byte1;
+ unsigned short code;
+ fpu_addr_modes addr_modes;
+ int unmasked;
+ FPU_REG loaded_data;
+ FPU_REG *st0_ptr;
+ u_char loaded_tag, st0_tag;
+ void __user *data_address;
+ struct address data_sel_off;
+ struct address entry_sel_off;
+ unsigned long code_base = 0;
+ unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
+ struct desc_struct code_descriptor;
+
+#ifdef RE_ENTRANT_CHECKING
+ if ( emulating )
+ {
+ printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
+ }
+ RE_ENTRANT_CHECK_ON;
+#endif /* RE_ENTRANT_CHECKING */
+
+ if (!used_math())
+ {
+ finit();
+ set_used_math();
+ }
+
+ SETUP_DATA_AREA(arg);
+
+ FPU_ORIG_EIP = FPU_EIP;
+
+ if ( (FPU_EFLAGS & 0x00020000) != 0 )
+ {
+ /* Virtual 8086 mode */
+ addr_modes.default_mode = VM86;
+ FPU_EIP += code_base = FPU_CS << 4;
+ code_limit = code_base + 0xffff; /* Assumes code_base <= 0xffff0000 */
+ }
+ else if ( FPU_CS == __USER_CS && FPU_DS == __USER_DS )
+ {
+ addr_modes.default_mode = 0;
+ }
+ else if ( FPU_CS == __KERNEL_CS )
+ {
+ printk("math_emulate: %04x:%08lx\n",FPU_CS,FPU_EIP);
+ panic("Math emulation needed in kernel");
+ }
+ else
+ {
+
+ if ( (FPU_CS & 4) != 4 ) /* Must be in the LDT */
+ {
+ /* Can only handle segmented addressing via the LDT
+ for now, and it must be 16 bit */
+ printk("FPU emulator: Unsupported addressing mode\n");
+ math_abort(FPU_info, SIGILL);
+ }
+
+ code_descriptor = LDT_DESCRIPTOR(FPU_CS);
+ if ( SEG_D_SIZE(code_descriptor) )
+ {
+ /* The above test may be wrong, the book is not clear */
+ /* Segmented 32 bit protected mode */
+ addr_modes.default_mode = SEG32;
+ }
+ else
+ {
+ /* 16 bit protected mode */
+ addr_modes.default_mode = PM16;
+ }
+ FPU_EIP += code_base = SEG_BASE_ADDR(code_descriptor);
+ code_limit = code_base
+ + (SEG_LIMIT(code_descriptor)+1) * SEG_GRANULARITY(code_descriptor)
+ - 1;
+ if ( code_limit < code_base ) code_limit = 0xffffffff;
+ }
+
+ FPU_lookahead = 1;
+ if (current->ptrace & PT_PTRACED)
+ FPU_lookahead = 0;
+
+ if ( !valid_prefix(&byte1, (u_char __user **)&FPU_EIP,
+ &addr_modes.override) )
+ {
+ RE_ENTRANT_CHECK_OFF;
+ printk("FPU emulator: Unknown prefix byte 0x%02x, probably due to\n"
+ "FPU emulator: self-modifying code! (emulation impossible)\n",
+ byte1);
+ RE_ENTRANT_CHECK_ON;
+ EXCEPTION(EX_INTERNAL|0x126);
+ math_abort(FPU_info,SIGILL);
+ }
+
+do_another_FPU_instruction:
+
+ no_ip_update = 0;
+
+ FPU_EIP++; /* We have fetched the prefix and first code bytes. */
+
+ if ( addr_modes.default_mode )
+ {
+ /* This checks for the minimum instruction bytes.
+ We also need to check any extra (address mode) code access. */
+ if ( FPU_EIP > code_limit )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ if ( (byte1 & 0xf8) != 0xd8 )
+ {
+ if ( byte1 == FWAIT_OPCODE )
+ {
+ if (partial_status & SW_Summary)
+ goto do_the_FPU_interrupt;
+ else
+ goto FPU_fwait_done;
+ }
+#ifdef PARANOID
+ EXCEPTION(EX_INTERNAL|0x128);
+ math_abort(FPU_info,SIGILL);
+#endif /* PARANOID */
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(FPU_modrm, (u_char __user *) FPU_EIP);
+ RE_ENTRANT_CHECK_ON;
+ FPU_EIP++;
+
+ if (partial_status & SW_Summary)
+ {
+ /* Ignore the error for now if the current instruction is a no-wait
+ control instruction */
+ /* The 80486 manual contradicts itself on this topic,
+ but a real 80486 uses the following instructions:
+ fninit, fnstenv, fnsave, fnstsw, fnstenv, fnclex.
+ */
+ code = (FPU_modrm << 8) | byte1;
+ if ( ! ( (((code & 0xf803) == 0xe003) || /* fnclex, fninit, fnstsw */
+ (((code & 0x3003) == 0x3001) && /* fnsave, fnstcw, fnstenv,
+ fnstsw */
+ ((code & 0xc000) != 0xc000))) ) )
+ {
+ /*
+ * We need to simulate the action of the kernel to FPU
+ * interrupts here.
+ */
+ do_the_FPU_interrupt:
+
+ FPU_EIP = FPU_ORIG_EIP; /* Point to current FPU instruction. */
+
+ RE_ENTRANT_CHECK_OFF;
+ current->thread.trap_no = 16;
+ current->thread.error_code = 0;
+ send_sig(SIGFPE, current, 1);
+ return;
+ }
+ }
+
+ entry_sel_off.offset = FPU_ORIG_EIP;
+ entry_sel_off.selector = FPU_CS;
+ entry_sel_off.opcode = (byte1 << 8) | FPU_modrm;
+
+ FPU_rm = FPU_modrm & 7;
+
+ if ( FPU_modrm < 0300 )
+ {
+ /* All of these instructions use the mod/rm byte to get a data address */
+
+ if ( (addr_modes.default_mode & SIXTEEN)
+ ^ (addr_modes.override.address_size == ADDR_SIZE_PREFIX) )
+ data_address = FPU_get_address_16(FPU_modrm, &FPU_EIP, &data_sel_off,
+ addr_modes);
+ else
+ data_address = FPU_get_address(FPU_modrm, &FPU_EIP, &data_sel_off,
+ addr_modes);
+
+ if ( addr_modes.default_mode )
+ {
+ if ( FPU_EIP-1 > code_limit )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ if ( !(byte1 & 1) )
+ {
+ unsigned short status1 = partial_status;
+
+ st0_ptr = &st(0);
+ st0_tag = FPU_gettag0();
+
+ /* Stack underflow has priority */
+ if ( NOT_EMPTY_ST0 )
+ {
+ if ( addr_modes.default_mode & PROTECTED )
+ {
+ /* This table works for 16 and 32 bit protected mode */
+ if ( access_limit < data_sizes_16[(byte1 >> 1) & 3] )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ unmasked = 0; /* Do this here to stop compiler warnings. */
+ switch ( (byte1 >> 1) & 3 )
+ {
+ case 0:
+ unmasked = FPU_load_single((float __user *)data_address,
+ &loaded_data);
+ loaded_tag = unmasked & 0xff;
+ unmasked &= ~0xff;
+ break;
+ case 1:
+ loaded_tag = FPU_load_int32((long __user *)data_address, &loaded_data);
+ break;
+ case 2:
+ unmasked = FPU_load_double((double __user *)data_address,
+ &loaded_data);
+ loaded_tag = unmasked & 0xff;
+ unmasked &= ~0xff;
+ break;
+ case 3:
+ default: /* Used here to suppress gcc warnings. */
+ loaded_tag = FPU_load_int16((short __user *)data_address, &loaded_data);
+ break;
+ }
+
+ /* No more access to user memory, it is safe
+ to use static data now */
+
+ /* NaN operands have the next priority. */
+ /* We have to delay looking at st(0) until after
+ loading the data, because that data might contain an SNaN */
+ if ( ((st0_tag == TAG_Special) && isNaN(st0_ptr)) ||
+ ((loaded_tag == TAG_Special) && isNaN(&loaded_data)) )
+ {
+ /* Restore the status word; we might have loaded a
+ denormal. */
+ partial_status = status1;
+ if ( (FPU_modrm & 0x30) == 0x10 )
+ {
+ /* fcom or fcomp */
+ EXCEPTION(EX_Invalid);
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ if ( (FPU_modrm & 0x08) && (control_word & CW_Invalid) )
+ FPU_pop(); /* fcomp, masked, so we pop. */
+ }
+ else
+ {
+ if ( loaded_tag == TAG_Special )
+ loaded_tag = FPU_Special(&loaded_data);
+#ifdef PECULIAR_486
+ /* This is not really needed, but gives behaviour
+ identical to an 80486 */
+ if ( (FPU_modrm & 0x28) == 0x20 )
+ /* fdiv or fsub */
+ real_2op_NaN(&loaded_data, loaded_tag, 0, &loaded_data);
+ else
+#endif /* PECULIAR_486 */
+ /* fadd, fdivr, fmul, or fsubr */
+ real_2op_NaN(&loaded_data, loaded_tag, 0, st0_ptr);
+ }
+ goto reg_mem_instr_done;
+ }
+
+ if ( unmasked && !((FPU_modrm & 0x30) == 0x10) )
+ {
+ /* Is not a comparison instruction. */
+ if ( (FPU_modrm & 0x38) == 0x38 )
+ {
+ /* fdivr */
+ if ( (st0_tag == TAG_Zero) &&
+ ((loaded_tag == TAG_Valid)
+ || (loaded_tag == TAG_Special
+ && isdenormal(&loaded_data))) )
+ {
+ if ( FPU_divide_by_zero(0, getsign(&loaded_data))
+ < 0 )
+ {
+ /* We use the fact here that the unmasked
+ exception in the loaded data was for a
+ denormal operand */
+ /* Restore the state of the denormal op bit */
+ partial_status &= ~SW_Denorm_Op;
+ partial_status |= status1 & SW_Denorm_Op;
+ }
+ else
+ setsign(st0_ptr, getsign(&loaded_data));
+ }
+ }
+ goto reg_mem_instr_done;
+ }
+
+ switch ( (FPU_modrm >> 3) & 7 )
+ {
+ case 0: /* fadd */
+ clear_C1();
+ FPU_add(&loaded_data, loaded_tag, 0, control_word);
+ break;
+ case 1: /* fmul */
+ clear_C1();
+ FPU_mul(&loaded_data, loaded_tag, 0, control_word);
+ break;
+ case 2: /* fcom */
+ FPU_compare_st_data(&loaded_data, loaded_tag);
+ break;
+ case 3: /* fcomp */
+ if ( !FPU_compare_st_data(&loaded_data, loaded_tag)
+ && !unmasked )
+ FPU_pop();
+ break;
+ case 4: /* fsub */
+ clear_C1();
+ FPU_sub(LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 5: /* fsubr */
+ clear_C1();
+ FPU_sub(REV|LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 6: /* fdiv */
+ clear_C1();
+ FPU_div(LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 7: /* fdivr */
+ clear_C1();
+ if ( st0_tag == TAG_Zero )
+ partial_status = status1; /* Undo any denorm tag,
+ zero-divide has priority. */
+ FPU_div(REV|LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ }
+ }
+ else
+ {
+ if ( (FPU_modrm & 0x30) == 0x10 )
+ {
+ /* The instruction is fcom or fcomp */
+ EXCEPTION(EX_StackUnder);
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ if ( (FPU_modrm & 0x08) && (control_word & CW_Invalid) )
+ FPU_pop(); /* fcomp */
+ }
+ else
+ FPU_stack_underflow();
+ }
+ reg_mem_instr_done:
+ operand_address = data_sel_off;
+ }
+ else
+ {
+ if ( !(no_ip_update =
+ FPU_load_store(((FPU_modrm & 0x38) | (byte1 & 6)) >> 1,
+ addr_modes, data_address)) )
+ {
+ operand_address = data_sel_off;
+ }
+ }
+
+ }
+ else
+ {
+ /* None of these instructions access user memory */
+ u_char instr_index = (FPU_modrm & 0x38) | (byte1 & 7);
+
+#ifdef PECULIAR_486
+ /* This is supposed to be undefined, but a real 80486 seems
+ to do this: */
+ operand_address.offset = 0;
+ operand_address.selector = FPU_DS;
+#endif /* PECULIAR_486 */
+
+ st0_ptr = &st(0);
+ st0_tag = FPU_gettag0();
+ switch ( type_table[(int) instr_index] )
+ {
+ case _NONE_: /* also _REGIc: _REGIn */
+ break;
+ case _REG0_:
+ if ( !NOT_EMPTY_ST0 )
+ {
+ FPU_stack_underflow();
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGIi:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow_i(FPU_rm);
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGIp:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow_pop(FPU_rm);
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGI_:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow();
+ goto FPU_instruction_done;
+ }
+ break;
+ case _PUSH_: /* Only used by the fld st(i) instruction */
+ break;
+ case _null_:
+ FPU_illegal();
+ goto FPU_instruction_done;
+ default:
+ EXCEPTION(EX_INTERNAL|0x111);
+ goto FPU_instruction_done;
+ }
+ (*st_instr_table[(int) instr_index])();
+
+FPU_instruction_done:
+ ;
+ }
+
+ if ( ! no_ip_update )
+ instruction_address = entry_sel_off;
+
+FPU_fwait_done:
+
+#ifdef DEBUG
+ RE_ENTRANT_CHECK_OFF;
+ FPU_printall();
+ RE_ENTRANT_CHECK_ON;
+#endif /* DEBUG */
+
+ if (FPU_lookahead && !need_resched())
+ {
+ FPU_ORIG_EIP = FPU_EIP - code_base;
+ if ( valid_prefix(&byte1, (u_char __user **)&FPU_EIP,
+ &addr_modes.override) )
+ goto do_another_FPU_instruction;
+ }
+
+ if ( addr_modes.default_mode )
+ FPU_EIP -= code_base;
+
+ RE_ENTRANT_CHECK_OFF;
+}
+
+
+/* Support for prefix bytes is not yet complete. To properly handle
+ all prefix bytes, further changes are needed in the emulator code
+ which accesses user address space. Access to separate segments is
+ important for msdos emulation. */
+static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
+ overrides *override)
+{
+ u_char byte;
+ u_char __user *ip = *fpu_eip;
+
+ *override = (overrides) { 0, 0, PREFIX_DEFAULT }; /* defaults */
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(byte, ip);
+ RE_ENTRANT_CHECK_ON;
+
+ while ( 1 )
+ {
+ switch ( byte )
+ {
+ case ADDR_SIZE_PREFIX:
+ override->address_size = ADDR_SIZE_PREFIX;
+ goto do_next_byte;
+
+ case OP_SIZE_PREFIX:
+ override->operand_size = OP_SIZE_PREFIX;
+ goto do_next_byte;
+
+ case PREFIX_CS:
+ override->segment = PREFIX_CS_;
+ goto do_next_byte;
+ case PREFIX_ES:
+ override->segment = PREFIX_ES_;
+ goto do_next_byte;
+ case PREFIX_SS:
+ override->segment = PREFIX_SS_;
+ goto do_next_byte;
+ case PREFIX_FS:
+ override->segment = PREFIX_FS_;
+ goto do_next_byte;
+ case PREFIX_GS:
+ override->segment = PREFIX_GS_;
+ goto do_next_byte;
+ case PREFIX_DS:
+ override->segment = PREFIX_DS_;
+ goto do_next_byte;
+
+/* lock is not a valid prefix for FPU instructions,
+ let the cpu handle it to generate a SIGILL. */
+/* case PREFIX_LOCK: */
+
+ /* rep.. prefixes have no meaning for FPU instructions */
+ case PREFIX_REPE:
+ case PREFIX_REPNE:
+
+ do_next_byte:
+ ip++;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(byte, ip);
+ RE_ENTRANT_CHECK_ON;
+ break;
+ case FWAIT_OPCODE:
+ *Byte = byte;
+ return 1;
+ default:
+ if ( (byte & 0xf8) == 0xd8 )
+ {
+ *Byte = byte;
+ *fpu_eip = ip;
+ return 1;
+ }
+ else
+ {
+ /* Not a valid sequence of prefix bytes followed by
+ an FPU instruction. */
+ *Byte = byte; /* Needed for error message. */
+ return 0;
+ }
+ }
+ }
+}
+
+
+void math_abort(struct info * info, unsigned int signal)
+{
+ FPU_EIP = FPU_ORIG_EIP;
+ current->thread.trap_no = 16;
+ current->thread.error_code = 0;
+ send_sig(signal,current,1);
+ RE_ENTRANT_CHECK_OFF;
+ __asm__("movl %0,%%esp ; ret": :"g" (((long) info)-4));
+#ifdef PARANOID
+ printk("ERROR: wm-FPU-emu math_abort failed!\n");
+#endif /* PARANOID */
+}
+
+
+
+#define S387 ((struct i387_soft_struct *)s387)
+#define sstatus_word() \
+ ((S387->swd & ~SW_Top & 0xffff) | ((S387->ftop << SW_Top_Shift) & SW_Top))
+
+int restore_i387_soft(void *s387, struct _fpstate __user *buf)
+{
+ u_char __user *d = (u_char __user *)buf;
+ int offset, other, i, tags, regnr, tag, newtop;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, d, 7*4 + 8*10);
+ if (__copy_from_user(&S387->cwd, d, 7*4))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ d += 7*4;
+
+ S387->ftop = (S387->swd >> SW_Top_Shift) & 7;
+ offset = (S387->ftop & 7) * 10;
+ other = 80 - offset;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* Copy all registers in stack order. */
+ if (__copy_from_user(((u_char *)&S387->st_space)+offset, d, other))
+ return -1;
+ if ( offset )
+ if (__copy_from_user((u_char *)&S387->st_space, d+other, offset))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ /* The tags may need to be corrected now. */
+ tags = S387->twd;
+ newtop = S387->ftop;
+ for ( i = 0; i < 8; i++ )
+ {
+ regnr = (i+newtop) & 7;
+ if ( ((tags >> ((regnr & 7)*2)) & 3) != TAG_Empty )
+ {
+ /* The loaded data over-rides all other cases. */
+ tag = FPU_tagof((FPU_REG *)((u_char *)S387->st_space + 10*regnr));
+ tags &= ~(3 << (regnr*2));
+ tags |= (tag & 3) << (regnr*2);
+ }
+ }
+ S387->twd = tags;
+
+ return 0;
+}
+
+
+int save_i387_soft(void *s387, struct _fpstate __user * buf)
+{
+ u_char __user *d = (u_char __user *)buf;
+ int offset = (S387->ftop & 7) * 10, other = 80 - offset;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE, d, 7*4 + 8*10);
+#ifdef PECULIAR_486
+ S387->cwd &= ~0xe080;
+ /* An 80486 sets nearly all of the reserved bits to 1. */
+ S387->cwd |= 0xffff0040;
+ S387->swd = sstatus_word() | 0xffff0000;
+ S387->twd |= 0xffff0000;
+ S387->fcs &= ~0xf8000000;
+ S387->fos |= 0xffff0000;
+#endif /* PECULIAR_486 */
+ __copy_to_user(d, &S387->cwd, 7*4);
+ RE_ENTRANT_CHECK_ON;
+
+ d += 7*4;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* Copy all registers in stack order. */
+ if (__copy_to_user(d, ((u_char *)&S387->st_space)+offset, other))
+ return -1;
+ if ( offset )
+ if (__copy_to_user(d+other, (u_char *)&S387->st_space, offset))
+ return -1
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
diff --git a/arch/i386/math-emu/fpu_etc.c b/arch/i386/math-emu/fpu_etc.c
new file mode 100644
index 0000000..e3b5d46
--- /dev/null
+++ b/arch/i386/math-emu/fpu_etc.c
@@ -0,0 +1,143 @@
+/*---------------------------------------------------------------------------+
+ | fpu_etc.c |
+ | |
+ | Implement a few FPU instructions. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+#include "status_w.h"
+#include "reg_constant.h"
+
+
+static void fchs(FPU_REG *st0_ptr, u_char st0tag)
+{
+ if ( st0tag ^ TAG_Empty )
+ {
+ signbyte(st0_ptr) ^= SIGN_NEG;
+ clear_C1();
+ }
+ else
+ FPU_stack_underflow();
+}
+
+
+static void fabs(FPU_REG *st0_ptr, u_char st0tag)
+{
+ if ( st0tag ^ TAG_Empty )
+ {
+ setpositive(st0_ptr);
+ clear_C1();
+ }
+ else
+ FPU_stack_underflow();
+}
+
+
+static void ftst_(FPU_REG *st0_ptr, u_char st0tag)
+{
+ switch (st0tag)
+ {
+ case TAG_Zero:
+ setcc(SW_C3);
+ break;
+ case TAG_Valid:
+ if (getsign(st0_ptr) == SIGN_POS)
+ setcc(0);
+ else
+ setcc(SW_C0);
+ break;
+ case TAG_Special:
+ switch ( FPU_Special(st0_ptr) )
+ {
+ case TW_Denormal:
+ if (getsign(st0_ptr) == SIGN_POS)
+ setcc(0);
+ else
+ setcc(SW_C0);
+ if ( denormal_operand() < 0 )
+ {
+#ifdef PECULIAR_486
+ /* This is weird! */
+ if (getsign(st0_ptr) == SIGN_POS)
+ setcc(SW_C3);
+#endif /* PECULIAR_486 */
+ return;
+ }
+ break;
+ case TW_NaN:
+ setcc(SW_C0|SW_C2|SW_C3); /* Operand is not comparable */
+ EXCEPTION(EX_Invalid);
+ break;
+ case TW_Infinity:
+ if (getsign(st0_ptr) == SIGN_POS)
+ setcc(0);
+ else
+ setcc(SW_C0);
+ break;
+ default:
+ setcc(SW_C0|SW_C2|SW_C3); /* Operand is not comparable */
+ EXCEPTION(EX_INTERNAL|0x14);
+ break;
+ }
+ break;
+ case TAG_Empty:
+ setcc(SW_C0|SW_C2|SW_C3);
+ EXCEPTION(EX_StackUnder);
+ break;
+ }
+}
+
+
+static void fxam(FPU_REG *st0_ptr, u_char st0tag)
+{
+ int c = 0;
+ switch (st0tag)
+ {
+ case TAG_Empty:
+ c = SW_C3|SW_C0;
+ break;
+ case TAG_Zero:
+ c = SW_C3;
+ break;
+ case TAG_Valid:
+ c = SW_C2;
+ break;
+ case TAG_Special:
+ switch ( FPU_Special(st0_ptr) )
+ {
+ case TW_Denormal:
+ c = SW_C2|SW_C3; /* Denormal */
+ break;
+ case TW_NaN:
+ /* We also use NaN for unsupported types. */
+ if ( (st0_ptr->sigh & 0x80000000) && (exponent(st0_ptr) == EXP_OVER) )
+ c = SW_C0;
+ break;
+ case TW_Infinity:
+ c = SW_C2|SW_C0;
+ break;
+ }
+ }
+ if ( getsign(st0_ptr) == SIGN_NEG )
+ c |= SW_C1;
+ setcc(c);
+}
+
+
+static FUNC_ST0 const fp_etc_table[] = {
+ fchs, fabs, (FUNC_ST0)FPU_illegal, (FUNC_ST0)FPU_illegal,
+ ftst_, fxam, (FUNC_ST0)FPU_illegal, (FUNC_ST0)FPU_illegal
+};
+
+void FPU_etc(void)
+{
+ (fp_etc_table[FPU_rm])(&st(0), FPU_gettag0());
+}
diff --git a/arch/i386/math-emu/fpu_proto.h b/arch/i386/math-emu/fpu_proto.h
new file mode 100644
index 0000000..37a8a7f
--- /dev/null
+++ b/arch/i386/math-emu/fpu_proto.h
@@ -0,0 +1,140 @@
+#ifndef _FPU_PROTO_H
+#define _FPU_PROTO_H
+
+/* errors.c */
+extern void FPU_illegal(void);
+extern void FPU_printall(void);
+asmlinkage void FPU_exception(int n);
+extern int real_1op_NaN(FPU_REG *a);
+extern int real_2op_NaN(FPU_REG const *b, u_char tagb, int deststnr,
+ FPU_REG const *defaultNaN);
+asmlinkage int arith_invalid(int deststnr);
+asmlinkage int FPU_divide_by_zero(int deststnr, u_char sign);
+extern int set_precision_flag(int flags);
+asmlinkage void set_precision_flag_up(void);
+asmlinkage void set_precision_flag_down(void);
+asmlinkage int denormal_operand(void);
+asmlinkage int arith_overflow(FPU_REG *dest);
+asmlinkage int arith_underflow(FPU_REG *dest);
+extern void FPU_stack_overflow(void);
+extern void FPU_stack_underflow(void);
+extern void FPU_stack_underflow_i(int i);
+extern void FPU_stack_underflow_pop(int i);
+/* fpu_arith.c */
+extern void fadd__(void);
+extern void fmul__(void);
+extern void fsub__(void);
+extern void fsubr_(void);
+extern void fdiv__(void);
+extern void fdivr_(void);
+extern void fadd_i(void);
+extern void fmul_i(void);
+extern void fsubri(void);
+extern void fsub_i(void);
+extern void fdivri(void);
+extern void fdiv_i(void);
+extern void faddp_(void);
+extern void fmulp_(void);
+extern void fsubrp(void);
+extern void fsubp_(void);
+extern void fdivrp(void);
+extern void fdivp_(void);
+/* fpu_aux.c */
+extern void finit(void);
+extern void finit_(void);
+extern void fstsw_(void);
+extern void fp_nop(void);
+extern void fld_i_(void);
+extern void fxch_i(void);
+extern void ffree_(void);
+extern void ffreep(void);
+extern void fst_i_(void);
+extern void fstp_i(void);
+/* fpu_entry.c */
+asmlinkage extern void math_emulate(long arg);
+extern void math_abort(struct info *info, unsigned int signal);
+/* fpu_etc.c */
+extern void FPU_etc(void);
+/* fpu_tags.c */
+extern int FPU_gettag0(void);
+extern int FPU_gettagi(int stnr);
+extern int FPU_gettag(int regnr);
+extern void FPU_settag0(int tag);
+extern void FPU_settagi(int stnr, int tag);
+extern void FPU_settag(int regnr, int tag);
+extern int FPU_Special(FPU_REG const *ptr);
+extern int isNaN(FPU_REG const *ptr);
+extern void FPU_pop(void);
+extern int FPU_empty_i(int stnr);
+extern int FPU_stackoverflow(FPU_REG **st_new_ptr);
+extern void FPU_copy_to_regi(FPU_REG const *r, u_char tag, int stnr);
+extern void FPU_copy_to_reg1(FPU_REG const *r, u_char tag);
+extern void FPU_copy_to_reg0(FPU_REG const *r, u_char tag);
+/* fpu_trig.c */
+extern void FPU_triga(void);
+extern void FPU_trigb(void);
+/* get_address.c */
+extern void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip,
+ struct address *addr, fpu_addr_modes addr_modes);
+extern void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip,
+ struct address *addr, fpu_addr_modes addr_modes);
+/* load_store.c */
+extern int FPU_load_store(u_char type, fpu_addr_modes addr_modes,
+ void __user *data_address);
+/* poly_2xm1.c */
+extern int poly_2xm1(u_char sign, FPU_REG *arg, FPU_REG *result);
+/* poly_atan.c */
+extern void poly_atan(FPU_REG *st0_ptr, u_char st0_tag, FPU_REG *st1_ptr,
+ u_char st1_tag);
+/* poly_l2.c */
+extern void poly_l2(FPU_REG *st0_ptr, FPU_REG *st1_ptr, u_char st1_sign);
+extern int poly_l2p1(u_char s0, u_char s1, FPU_REG *r0, FPU_REG *r1,
+ FPU_REG *d);
+/* poly_sin.c */
+extern void poly_sine(FPU_REG *st0_ptr);
+extern void poly_cos(FPU_REG *st0_ptr);
+/* poly_tan.c */
+extern void poly_tan(FPU_REG *st0_ptr);
+/* reg_add_sub.c */
+extern int FPU_add(FPU_REG const *b, u_char tagb, int destrnr, int control_w);
+extern int FPU_sub(int flags, int rm, int control_w);
+/* reg_compare.c */
+extern int FPU_compare_st_data(FPU_REG const *loaded_data, u_char loaded_tag);
+extern void fcom_st(void);
+extern void fcompst(void);
+extern void fcompp(void);
+extern void fucom_(void);
+extern void fucomp(void);
+extern void fucompp(void);
+/* reg_constant.c */
+extern void fconst(void);
+/* reg_ld_str.c */
+extern int FPU_load_extended(long double __user *s, int stnr);
+extern int FPU_load_double(double __user *dfloat, FPU_REG *loaded_data);
+extern int FPU_load_single(float __user *single, FPU_REG *loaded_data);
+extern int FPU_load_int64(long long __user *_s);
+extern int FPU_load_int32(long __user *_s, FPU_REG *loaded_data);
+extern int FPU_load_int16(short __user *_s, FPU_REG *loaded_data);
+extern int FPU_load_bcd(u_char __user *s);
+extern int FPU_store_extended(FPU_REG *st0_ptr, u_char st0_tag,
+ long double __user *d);
+extern int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat);
+extern int FPU_store_single(FPU_REG *st0_ptr, u_char st0_tag, float __user *single);
+extern int FPU_store_int64(FPU_REG *st0_ptr, u_char st0_tag, long long __user *d);
+extern int FPU_store_int32(FPU_REG *st0_ptr, u_char st0_tag, long __user *d);
+extern int FPU_store_int16(FPU_REG *st0_ptr, u_char st0_tag, short __user *d);
+extern int FPU_store_bcd(FPU_REG *st0_ptr, u_char st0_tag, u_char __user *d);
+extern int FPU_round_to_int(FPU_REG *r, u_char tag);
+extern u_char __user *fldenv(fpu_addr_modes addr_modes, u_char __user *s);
+extern void frstor(fpu_addr_modes addr_modes, u_char __user *data_address);
+extern u_char __user *fstenv(fpu_addr_modes addr_modes, u_char __user *d);
+extern void fsave(fpu_addr_modes addr_modes, u_char __user *data_address);
+extern int FPU_tagof(FPU_REG *ptr);
+/* reg_mul.c */
+extern int FPU_mul(FPU_REG const *b, u_char tagb, int deststnr, int control_w);
+
+extern int FPU_div(int flags, int regrm, int control_w);
+/* reg_convert.c */
+extern int FPU_to_exp16(FPU_REG const *a, FPU_REG *x);
+#endif /* _FPU_PROTO_H */
+
diff --git a/arch/i386/math-emu/fpu_system.h b/arch/i386/math-emu/fpu_system.h
new file mode 100644
index 0000000..bf26341
--- /dev/null
+++ b/arch/i386/math-emu/fpu_system.h
@@ -0,0 +1,89 @@
+/*---------------------------------------------------------------------------+
+ | fpu_system.h |
+ | |
+ | Copyright (C) 1992,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _FPU_SYSTEM_H
+#define _FPU_SYSTEM_H
+
+/* system dependent definitions */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+/* This sets the pointer FPU_info to point to the argument part
+ of the stack frame of math_emulate() */
+#define SETUP_DATA_AREA(arg) FPU_info = (struct info *) &arg
+
+/* s is always from a cpu register, and the cpu does bounds checking
+ * during register load --> no further bounds checks needed */
+#define LDT_DESCRIPTOR(s) (((struct desc_struct *)current->mm->context.ldt)[(s) >> 3])
+#define SEG_D_SIZE(x) ((x).b & (3 << 21))
+#define SEG_G_BIT(x) ((x).b & (1 << 23))
+#define SEG_GRANULARITY(x) (((x).b & (1 << 23)) ? 4096 : 1)
+#define SEG_286_MODE(x) ((x).b & ( 0xff000000 | 0xf0000 | (1 << 23)))
+#define SEG_BASE_ADDR(s) (((s).b & 0xff000000) \
+ | (((s).b & 0xff) << 16) | ((s).a >> 16))
+#define SEG_LIMIT(s) (((s).b & 0xff0000) | ((s).a & 0xffff))
+#define SEG_EXECUTE_ONLY(s) (((s).b & ((1 << 11) | (1 << 9))) == (1 << 11))
+#define SEG_WRITE_PERM(s) (((s).b & ((1 << 11) | (1 << 9))) == (1 << 9))
+#define SEG_EXPAND_DOWN(s) (((s).b & ((1 << 11) | (1 << 10))) \
+ == (1 << 10))
+
+#define I387 (current->thread.i387)
+#define FPU_info (I387.soft.info)
+
+#define FPU_CS (*(unsigned short *) &(FPU_info->___cs))
+#define FPU_SS (*(unsigned short *) &(FPU_info->___ss))
+#define FPU_DS (*(unsigned short *) &(FPU_info->___ds))
+#define FPU_EAX (FPU_info->___eax)
+#define FPU_EFLAGS (FPU_info->___eflags)
+#define FPU_EIP (FPU_info->___eip)
+#define FPU_ORIG_EIP (FPU_info->___orig_eip)
+
+#define FPU_lookahead (I387.soft.lookahead)
+
+/* nz if ip_offset and cs_selector are not to be set for the current
+ instruction. */
+#define no_ip_update (*(u_char *)&(I387.soft.no_update))
+#define FPU_rm (*(u_char *)&(I387.soft.rm))
+
+/* Number of bytes of data which can be legally accessed by the current
+ instruction. This only needs to hold a number <= 108, so a byte will do. */
+#define access_limit (*(u_char *)&(I387.soft.alimit))
+
+#define partial_status (I387.soft.swd)
+#define control_word (I387.soft.cwd)
+#define fpu_tag_word (I387.soft.twd)
+#define registers (I387.soft.st_space)
+#define top (I387.soft.ftop)
+
+#define instruction_address (*(struct address *)&I387.soft.fip)
+#define operand_address (*(struct address *)&I387.soft.foo)
+
+#define FPU_access_ok(x,y,z) if ( !access_ok(x,y,z) ) \
+ math_abort(FPU_info,SIGSEGV)
+
+#undef FPU_IGNORE_CODE_SEGV
+#ifdef FPU_IGNORE_CODE_SEGV
+/* access_ok() is very expensive, and causes the emulator to run
+ about 20% slower if applied to the code. Anyway, errors due to bad
+ code addresses should be much rarer than errors due to bad data
+ addresses. */
+#define FPU_code_access_ok(z)
+#else
+/* A simpler test than access_ok() can probably be done for
+ FPU_code_access_ok() because the only possible error is to step
+ past the upper boundary of a legal code area. */
+#define FPU_code_access_ok(z) FPU_access_ok(VERIFY_READ,(void __user *)FPU_EIP,z)
+#endif
+
+#define FPU_get_user(x,y) get_user((x),(y))
+#define FPU_put_user(x,y) put_user((x),(y))
+
+#endif
diff --git a/arch/i386/math-emu/fpu_tags.c b/arch/i386/math-emu/fpu_tags.c
new file mode 100644
index 0000000..cb436fe
--- /dev/null
+++ b/arch/i386/math-emu/fpu_tags.c
@@ -0,0 +1,127 @@
+/*---------------------------------------------------------------------------+
+ | fpu_tags.c |
+ | |
+ | Set FPU register tags. |
+ | |
+ | Copyright (C) 1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "exception.h"
+
+
+void FPU_pop(void)
+{
+ fpu_tag_word |= 3 << ((top & 7)*2);
+ top++;
+}
+
+
+int FPU_gettag0(void)
+{
+ return (fpu_tag_word >> ((top & 7)*2)) & 3;
+}
+
+
+int FPU_gettagi(int stnr)
+{
+ return (fpu_tag_word >> (((top+stnr) & 7)*2)) & 3;
+}
+
+
+int FPU_gettag(int regnr)
+{
+ return (fpu_tag_word >> ((regnr & 7)*2)) & 3;
+}
+
+
+void FPU_settag0(int tag)
+{
+ int regnr = top;
+ regnr &= 7;
+ fpu_tag_word &= ~(3 << (regnr*2));
+ fpu_tag_word |= (tag & 3) << (regnr*2);
+}
+
+
+void FPU_settagi(int stnr, int tag)
+{
+ int regnr = stnr+top;
+ regnr &= 7;
+ fpu_tag_word &= ~(3 << (regnr*2));
+ fpu_tag_word |= (tag & 3) << (regnr*2);
+}
+
+
+void FPU_settag(int regnr, int tag)
+{
+ regnr &= 7;
+ fpu_tag_word &= ~(3 << (regnr*2));
+ fpu_tag_word |= (tag & 3) << (regnr*2);
+}
+
+
+int FPU_Special(FPU_REG const *ptr)
+{
+ int exp = exponent(ptr);
+
+ if ( exp == EXP_BIAS+EXP_UNDER )
+ return TW_Denormal;
+ else if ( exp != EXP_BIAS+EXP_OVER )
+ return TW_NaN;
+ else if ( (ptr->sigh == 0x80000000) && (ptr->sigl == 0) )
+ return TW_Infinity;
+ return TW_NaN;
+}
+
+
+int isNaN(FPU_REG const *ptr)
+{
+ return ( (exponent(ptr) == EXP_BIAS+EXP_OVER)
+ && !((ptr->sigh == 0x80000000) && (ptr->sigl == 0)) );
+}
+
+
+int FPU_empty_i(int stnr)
+{
+ int regnr = (top+stnr) & 7;
+
+ return ((fpu_tag_word >> (regnr*2)) & 3) == TAG_Empty;
+}
+
+
+int FPU_stackoverflow(FPU_REG **st_new_ptr)
+{
+ *st_new_ptr = &st(-1);
+
+ return ((fpu_tag_word >> (((top - 1) & 7)*2)) & 3) != TAG_Empty;
+}
+
+
+void FPU_copy_to_regi(FPU_REG const *r, u_char tag, int stnr)
+{
+ reg_copy(r, &st(stnr));
+ FPU_settagi(stnr, tag);
+}
+
+void FPU_copy_to_reg1(FPU_REG const *r, u_char tag)
+{
+ reg_copy(r, &st(1));
+ FPU_settagi(1, tag);
+}
+
+void FPU_copy_to_reg0(FPU_REG const *r, u_char tag)
+{
+ int regnr = top;
+ regnr &= 7;
+
+ reg_copy(r, &st(0));
+
+ fpu_tag_word &= ~(3 << (regnr*2));
+ fpu_tag_word |= (tag & 3) << (regnr*2);
+}
diff --git a/arch/i386/math-emu/fpu_trig.c b/arch/i386/math-emu/fpu_trig.c
new file mode 100644
index 0000000..403cbde
--- /dev/null
+++ b/arch/i386/math-emu/fpu_trig.c
@@ -0,0 +1,1845 @@
+/*---------------------------------------------------------------------------+
+ | fpu_trig.c |
+ | |
+ | Implementation of the FPU "transcendental" functions. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@melbpc.org.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+#include "status_w.h"
+#include "control_w.h"
+#include "reg_constant.h"
+
+static void rem_kernel(unsigned long long st0, unsigned long long *y,
+ unsigned long long st1,
+ unsigned long long q, int n);
+
+#define BETTER_THAN_486
+
+#define FCOS 4
+
+/* Used only by fptan, fsin, fcos, and fsincos. */
+/* This routine produces very accurate results, similar to
+ using a value of pi with more than 128 bits precision. */
+/* Limited measurements show no results worse than 64 bit precision
+ except for the results for arguments close to 2^63, where the
+ precision of the result sometimes degrades to about 63.9 bits */
+static int trig_arg(FPU_REG *st0_ptr, int even)
+{
+ FPU_REG tmp;
+ u_char tmptag;
+ unsigned long long q;
+ int old_cw = control_word, saved_status = partial_status;
+ int tag, st0_tag = TAG_Valid;
+
+ if ( exponent(st0_ptr) >= 63 )
+ {
+ partial_status |= SW_C2; /* Reduction incomplete. */
+ return -1;
+ }
+
+ control_word &= ~CW_RC;
+ control_word |= RC_CHOP;
+
+ setpositive(st0_ptr);
+ tag = FPU_u_div(st0_ptr, &CONST_PI2, &tmp, PR_64_BITS | RC_CHOP | 0x3f,
+ SIGN_POS);
+
+ FPU_round_to_int(&tmp, tag); /* Fortunately, this can't overflow
+ to 2^64 */
+ q = significand(&tmp);
+ if ( q )
+ {
+ rem_kernel(significand(st0_ptr),
+ &significand(&tmp),
+ significand(&CONST_PI2),
+ q, exponent(st0_ptr) - exponent(&CONST_PI2));
+ setexponent16(&tmp, exponent(&CONST_PI2));
+ st0_tag = FPU_normalize(&tmp);
+ FPU_copy_to_reg0(&tmp, st0_tag);
+ }
+
+ if ( (even && !(q & 1)) || (!even && (q & 1)) )
+ {
+ st0_tag = FPU_sub(REV|LOADED|TAG_Valid, (int)&CONST_PI2, FULL_PRECISION);
+
+#ifdef BETTER_THAN_486
+ /* So far, the results are exact but based upon a 64 bit
+ precision approximation to pi/2. The technique used
+ now is equivalent to using an approximation to pi/2 which
+ is accurate to about 128 bits. */
+ if ( (exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64) || (q > 1) )
+ {
+ /* This code gives the effect of having pi/2 to better than
+ 128 bits precision. */
+
+ significand(&tmp) = q + 1;
+ setexponent16(&tmp, 63);
+ FPU_normalize(&tmp);
+ tmptag =
+ FPU_u_mul(&CONST_PI2extra, &tmp, &tmp, FULL_PRECISION, SIGN_POS,
+ exponent(&CONST_PI2extra) + exponent(&tmp));
+ setsign(&tmp, getsign(&CONST_PI2extra));
+ st0_tag = FPU_add(&tmp, tmptag, 0, FULL_PRECISION);
+ if ( signnegative(st0_ptr) )
+ {
+ /* CONST_PI2extra is negative, so the result of the addition
+ can be negative. This means that the argument is actually
+ in a different quadrant. The correction is always < pi/2,
+ so it can't overflow into yet another quadrant. */
+ setpositive(st0_ptr);
+ q++;
+ }
+ }
+#endif /* BETTER_THAN_486 */
+ }
+#ifdef BETTER_THAN_486
+ else
+ {
+ /* So far, the results are exact but based upon a 64 bit
+ precision approximation to pi/2. The technique used
+ now is equivalent to using an approximation to pi/2 which
+ is accurate to about 128 bits. */
+ if ( ((q > 0) && (exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64))
+ || (q > 1) )
+ {
+ /* This code gives the effect of having p/2 to better than
+ 128 bits precision. */
+
+ significand(&tmp) = q;
+ setexponent16(&tmp, 63);
+ FPU_normalize(&tmp); /* This must return TAG_Valid */
+ tmptag = FPU_u_mul(&CONST_PI2extra, &tmp, &tmp, FULL_PRECISION,
+ SIGN_POS,
+ exponent(&CONST_PI2extra) + exponent(&tmp));
+ setsign(&tmp, getsign(&CONST_PI2extra));
+ st0_tag = FPU_sub(LOADED|(tmptag & 0x0f), (int)&tmp,
+ FULL_PRECISION);
+ if ( (exponent(st0_ptr) == exponent(&CONST_PI2)) &&
+ ((st0_ptr->sigh > CONST_PI2.sigh)
+ || ((st0_ptr->sigh == CONST_PI2.sigh)
+ && (st0_ptr->sigl > CONST_PI2.sigl))) )
+ {
+ /* CONST_PI2extra is negative, so the result of the
+ subtraction can be larger than pi/2. This means
+ that the argument is actually in a different quadrant.
+ The correction is always < pi/2, so it can't overflow
+ into yet another quadrant. */
+ st0_tag = FPU_sub(REV|LOADED|TAG_Valid, (int)&CONST_PI2,
+ FULL_PRECISION);
+ q++;
+ }
+ }
+ }
+#endif /* BETTER_THAN_486 */
+
+ FPU_settag0(st0_tag);
+ control_word = old_cw;
+ partial_status = saved_status & ~SW_C2; /* Reduction complete. */
+
+ return (q & 3) | even;
+}
+
+
+/* Convert a long to register */
+static void convert_l2reg(long const *arg, int deststnr)
+{
+ int tag;
+ long num = *arg;
+ u_char sign;
+ FPU_REG *dest = &st(deststnr);
+
+ if (num == 0)
+ {
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+ return;
+ }
+
+ if (num > 0)
+ { sign = SIGN_POS; }
+ else
+ { num = -num; sign = SIGN_NEG; }
+
+ dest->sigh = num;
+ dest->sigl = 0;
+ setexponent16(dest, 31);
+ tag = FPU_normalize(dest);
+ FPU_settagi(deststnr, tag);
+ setsign(dest, sign);
+ return;
+}
+
+
+static void single_arg_error(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ if ( st0_tag == TAG_Empty )
+ FPU_stack_underflow(); /* Puts a QNaN in st(0) */
+ else if ( st0_tag == TW_NaN )
+ real_1op_NaN(st0_ptr); /* return with a NaN in st(0) */
+#ifdef PARANOID
+ else
+ EXCEPTION(EX_INTERNAL|0x0112);
+#endif /* PARANOID */
+}
+
+
+static void single_arg_2_error(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ int isNaN;
+
+ switch ( st0_tag )
+ {
+ case TW_NaN:
+ isNaN = (exponent(st0_ptr) == EXP_OVER) && (st0_ptr->sigh & 0x80000000);
+ if ( isNaN && !(st0_ptr->sigh & 0x40000000) ) /* Signaling ? */
+ {
+ EXCEPTION(EX_Invalid);
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ /* Convert to a QNaN */
+ st0_ptr->sigh |= 0x40000000;
+ push();
+ FPU_copy_to_reg0(st0_ptr, TAG_Special);
+ }
+ }
+ else if ( isNaN )
+ {
+ /* A QNaN */
+ push();
+ FPU_copy_to_reg0(st0_ptr, TAG_Special);
+ }
+ else
+ {
+ /* pseudoNaN or other unsupported */
+ EXCEPTION(EX_Invalid);
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
+ push();
+ FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
+ }
+ }
+ break; /* return with a NaN in st(0) */
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x0112);
+#endif /* PARANOID */
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+
+static void f2xm1(FPU_REG *st0_ptr, u_char tag)
+{
+ FPU_REG a;
+
+ clear_C1();
+
+ if ( tag == TAG_Valid )
+ {
+ /* For an 80486 FPU, the result is undefined if the arg is >= 1.0 */
+ if ( exponent(st0_ptr) < 0 )
+ {
+ denormal_arg:
+
+ FPU_to_exp16(st0_ptr, &a);
+
+ /* poly_2xm1(x) requires 0 < st(0) < 1. */
+ poly_2xm1(getsign(st0_ptr), &a, st0_ptr);
+ }
+ set_precision_flag_up(); /* 80486 appears to always do this */
+ return;
+ }
+
+ if ( tag == TAG_Zero )
+ return;
+
+ if ( tag == TAG_Special )
+ tag = FPU_Special(st0_ptr);
+
+ switch ( tag )
+ {
+ case TW_Denormal:
+ if ( denormal_operand() < 0 )
+ return;
+ goto denormal_arg;
+ case TW_Infinity:
+ if ( signnegative(st0_ptr) )
+ {
+ /* -infinity gives -1 (p16-10) */
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+ setnegative(st0_ptr);
+ }
+ return;
+ default:
+ single_arg_error(st0_ptr, tag);
+ }
+}
+
+
+static void fptan(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st_new_ptr;
+ int q;
+ u_char arg_sign = getsign(st0_ptr);
+
+ /* Stack underflow has higher priority */
+ if ( st0_tag == TAG_Empty )
+ {
+ FPU_stack_underflow(); /* Puts a QNaN in st(0) */
+ if ( control_word & CW_Invalid )
+ {
+ st_new_ptr = &st(-1);
+ push();
+ FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */
+ }
+ return;
+ }
+
+ if ( STACK_OVERFLOW )
+ { FPU_stack_overflow(); return; }
+
+ if ( st0_tag == TAG_Valid )
+ {
+ if ( exponent(st0_ptr) > -40 )
+ {
+ if ( (q = trig_arg(st0_ptr, 0)) == -1 )
+ {
+ /* Operand is out of range */
+ return;
+ }
+
+ poly_tan(st0_ptr);
+ setsign(st0_ptr, (q & 1) ^ (arg_sign != 0));
+ set_precision_flag_up(); /* We do not really know if up or down */
+ }
+ else
+ {
+ /* For a small arg, the result == the argument */
+ /* Underflow may happen */
+
+ denormal_arg:
+
+ FPU_to_exp16(st0_ptr, st0_ptr);
+
+ st0_tag = FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign);
+ FPU_settag0(st0_tag);
+ }
+ push();
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+ return;
+ }
+
+ if ( st0_tag == TAG_Zero )
+ {
+ push();
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+ setcc(0);
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+
+ if ( st0_tag == TW_Denormal )
+ {
+ if ( denormal_operand() < 0 )
+ return;
+
+ goto denormal_arg;
+ }
+
+ if ( st0_tag == TW_Infinity )
+ {
+ /* The 80486 treats infinity as an invalid operand */
+ if ( arith_invalid(0) >= 0 )
+ {
+ st_new_ptr = &st(-1);
+ push();
+ arith_invalid(0);
+ }
+ return;
+ }
+
+ single_arg_2_error(st0_ptr, st0_tag);
+}
+
+
+static void fxtract(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st_new_ptr;
+ u_char sign;
+ register FPU_REG *st1_ptr = st0_ptr; /* anticipate */
+
+ if ( STACK_OVERFLOW )
+ { FPU_stack_overflow(); return; }
+
+ clear_C1();
+
+ if ( st0_tag == TAG_Valid )
+ {
+ long e;
+
+ push();
+ sign = getsign(st1_ptr);
+ reg_copy(st1_ptr, st_new_ptr);
+ setexponent16(st_new_ptr, exponent(st_new_ptr));
+
+ denormal_arg:
+
+ e = exponent16(st_new_ptr);
+ convert_l2reg(&e, 1);
+ setexponentpos(st_new_ptr, 0);
+ setsign(st_new_ptr, sign);
+ FPU_settag0(TAG_Valid); /* Needed if arg was a denormal */
+ return;
+ }
+ else if ( st0_tag == TAG_Zero )
+ {
+ sign = getsign(st0_ptr);
+
+ if ( FPU_divide_by_zero(0, SIGN_NEG) < 0 )
+ return;
+
+ push();
+ FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
+ setsign(st_new_ptr, sign);
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+
+ if ( st0_tag == TW_Denormal )
+ {
+ if (denormal_operand() < 0 )
+ return;
+
+ push();
+ sign = getsign(st1_ptr);
+ FPU_to_exp16(st1_ptr, st_new_ptr);
+ goto denormal_arg;
+ }
+ else if ( st0_tag == TW_Infinity )
+ {
+ sign = getsign(st0_ptr);
+ setpositive(st0_ptr);
+ push();
+ FPU_copy_to_reg0(&CONST_INF, TAG_Special);
+ setsign(st_new_ptr, sign);
+ return;
+ }
+ else if ( st0_tag == TW_NaN )
+ {
+ if ( real_1op_NaN(st0_ptr) < 0 )
+ return;
+
+ push();
+ FPU_copy_to_reg0(st0_ptr, TAG_Special);
+ return;
+ }
+ else if ( st0_tag == TAG_Empty )
+ {
+ /* Is this the correct behaviour? */
+ if ( control_word & EX_Invalid )
+ {
+ FPU_stack_underflow();
+ push();
+ FPU_stack_underflow();
+ }
+ else
+ EXCEPTION(EX_StackUnder);
+ }
+#ifdef PARANOID
+ else
+ EXCEPTION(EX_INTERNAL | 0x119);
+#endif /* PARANOID */
+}
+
+
+static void fdecstp(void)
+{
+ clear_C1();
+ top--;
+}
+
+static void fincstp(void)
+{
+ clear_C1();
+ top++;
+}
+
+
+static void fsqrt_(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ int expon;
+
+ clear_C1();
+
+ if ( st0_tag == TAG_Valid )
+ {
+ u_char tag;
+
+ if (signnegative(st0_ptr))
+ {
+ arith_invalid(0); /* sqrt(negative) is invalid */
+ return;
+ }
+
+ /* make st(0) in [1.0 .. 4.0) */
+ expon = exponent(st0_ptr);
+
+ denormal_arg:
+
+ setexponent16(st0_ptr, (expon & 1));
+
+ /* Do the computation, the sign of the result will be positive. */
+ tag = wm_sqrt(st0_ptr, 0, 0, control_word, SIGN_POS);
+ addexponent(st0_ptr, expon >> 1);
+ FPU_settag0(tag);
+ return;
+ }
+
+ if ( st0_tag == TAG_Zero )
+ return;
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+
+ if ( st0_tag == TW_Infinity )
+ {
+ if ( signnegative(st0_ptr) )
+ arith_invalid(0); /* sqrt(-Infinity) is invalid */
+ return;
+ }
+ else if ( st0_tag == TW_Denormal )
+ {
+ if (signnegative(st0_ptr))
+ {
+ arith_invalid(0); /* sqrt(negative) is invalid */
+ return;
+ }
+
+ if ( denormal_operand() < 0 )
+ return;
+
+ FPU_to_exp16(st0_ptr, st0_ptr);
+
+ expon = exponent16(st0_ptr);
+
+ goto denormal_arg;
+ }
+
+ single_arg_error(st0_ptr, st0_tag);
+
+}
+
+
+static void frndint_(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ int flags, tag;
+
+ if ( st0_tag == TAG_Valid )
+ {
+ u_char sign;
+
+ denormal_arg:
+
+ sign = getsign(st0_ptr);
+
+ if (exponent(st0_ptr) > 63)
+ return;
+
+ if ( st0_tag == TW_Denormal )
+ {
+ if (denormal_operand() < 0 )
+ return;
+ }
+
+ /* Fortunately, this can't overflow to 2^64 */
+ if ( (flags = FPU_round_to_int(st0_ptr, st0_tag)) )
+ set_precision_flag(flags);
+
+ setexponent16(st0_ptr, 63);
+ tag = FPU_normalize(st0_ptr);
+ setsign(st0_ptr, sign);
+ FPU_settag0(tag);
+ return;
+ }
+
+ if ( st0_tag == TAG_Zero )
+ return;
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+
+ if ( st0_tag == TW_Denormal )
+ goto denormal_arg;
+ else if ( st0_tag == TW_Infinity )
+ return;
+ else
+ single_arg_error(st0_ptr, st0_tag);
+}
+
+
+static int fsin(FPU_REG *st0_ptr, u_char tag)
+{
+ u_char arg_sign = getsign(st0_ptr);
+
+ if ( tag == TAG_Valid )
+ {
+ int q;
+
+ if ( exponent(st0_ptr) > -40 )
+ {
+ if ( (q = trig_arg(st0_ptr, 0)) == -1 )
+ {
+ /* Operand is out of range */
+ return 1;
+ }
+
+ poly_sine(st0_ptr);
+
+ if (q & 2)
+ changesign(st0_ptr);
+
+ setsign(st0_ptr, getsign(st0_ptr) ^ arg_sign);
+
+ /* We do not really know if up or down */
+ set_precision_flag_up();
+ return 0;
+ }
+ else
+ {
+ /* For a small arg, the result == the argument */
+ set_precision_flag_up(); /* Must be up. */
+ return 0;
+ }
+ }
+
+ if ( tag == TAG_Zero )
+ {
+ setcc(0);
+ return 0;
+ }
+
+ if ( tag == TAG_Special )
+ tag = FPU_Special(st0_ptr);
+
+ if ( tag == TW_Denormal )
+ {
+ if ( denormal_operand() < 0 )
+ return 1;
+
+ /* For a small arg, the result == the argument */
+ /* Underflow may happen */
+ FPU_to_exp16(st0_ptr, st0_ptr);
+
+ tag = FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign);
+
+ FPU_settag0(tag);
+
+ return 0;
+ }
+ else if ( tag == TW_Infinity )
+ {
+ /* The 80486 treats infinity as an invalid operand */
+ arith_invalid(0);
+ return 1;
+ }
+ else
+ {
+ single_arg_error(st0_ptr, tag);
+ return 1;
+ }
+}
+
+
+static int f_cos(FPU_REG *st0_ptr, u_char tag)
+{
+ u_char st0_sign;
+
+ st0_sign = getsign(st0_ptr);
+
+ if ( tag == TAG_Valid )
+ {
+ int q;
+
+ if ( exponent(st0_ptr) > -40 )
+ {
+ if ( (exponent(st0_ptr) < 0)
+ || ((exponent(st0_ptr) == 0)
+ && (significand(st0_ptr) <= 0xc90fdaa22168c234LL)) )
+ {
+ poly_cos(st0_ptr);
+
+ /* We do not really know if up or down */
+ set_precision_flag_down();
+
+ return 0;
+ }
+ else if ( (q = trig_arg(st0_ptr, FCOS)) != -1 )
+ {
+ poly_sine(st0_ptr);
+
+ if ((q+1) & 2)
+ changesign(st0_ptr);
+
+ /* We do not really know if up or down */
+ set_precision_flag_down();
+
+ return 0;
+ }
+ else
+ {
+ /* Operand is out of range */
+ return 1;
+ }
+ }
+ else
+ {
+ denormal_arg:
+
+ setcc(0);
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+#ifdef PECULIAR_486
+ set_precision_flag_down(); /* 80486 appears to do this. */
+#else
+ set_precision_flag_up(); /* Must be up. */
+#endif /* PECULIAR_486 */
+ return 0;
+ }
+ }
+ else if ( tag == TAG_Zero )
+ {
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+ setcc(0);
+ return 0;
+ }
+
+ if ( tag == TAG_Special )
+ tag = FPU_Special(st0_ptr);
+
+ if ( tag == TW_Denormal )
+ {
+ if ( denormal_operand() < 0 )
+ return 1;
+
+ goto denormal_arg;
+ }
+ else if ( tag == TW_Infinity )
+ {
+ /* The 80486 treats infinity as an invalid operand */
+ arith_invalid(0);
+ return 1;
+ }
+ else
+ {
+ single_arg_error(st0_ptr, tag); /* requires st0_ptr == &st(0) */
+ return 1;
+ }
+}
+
+
+static void fcos(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ f_cos(st0_ptr, st0_tag);
+}
+
+
+static void fsincos(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st_new_ptr;
+ FPU_REG arg;
+ u_char tag;
+
+ /* Stack underflow has higher priority */
+ if ( st0_tag == TAG_Empty )
+ {
+ FPU_stack_underflow(); /* Puts a QNaN in st(0) */
+ if ( control_word & CW_Invalid )
+ {
+ st_new_ptr = &st(-1);
+ push();
+ FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */
+ }
+ return;
+ }
+
+ if ( STACK_OVERFLOW )
+ { FPU_stack_overflow(); return; }
+
+ if ( st0_tag == TAG_Special )
+ tag = FPU_Special(st0_ptr);
+ else
+ tag = st0_tag;
+
+ if ( tag == TW_NaN )
+ {
+ single_arg_2_error(st0_ptr, TW_NaN);
+ return;
+ }
+ else if ( tag == TW_Infinity )
+ {
+ /* The 80486 treats infinity as an invalid operand */
+ if ( arith_invalid(0) >= 0 )
+ {
+ /* Masked response */
+ push();
+ arith_invalid(0);
+ }
+ return;
+ }
+
+ reg_copy(st0_ptr, &arg);
+ if ( !fsin(st0_ptr, st0_tag) )
+ {
+ push();
+ FPU_copy_to_reg0(&arg, st0_tag);
+ f_cos(&st(0), st0_tag);
+ }
+ else
+ {
+ /* An error, so restore st(0) */
+ FPU_copy_to_reg0(&arg, st0_tag);
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+/* The following all require two arguments: st(0) and st(1) */
+
+/* A lean, mean kernel for the fprem instructions. This relies upon
+ the division and rounding to an integer in do_fprem giving an
+ exact result. Because of this, rem_kernel() needs to deal only with
+ the least significant 64 bits, the more significant bits of the
+ result must be zero.
+ */
+static void rem_kernel(unsigned long long st0, unsigned long long *y,
+ unsigned long long st1,
+ unsigned long long q, int n)
+{
+ int dummy;
+ unsigned long long x;
+
+ x = st0 << n;
+
+ /* Do the required multiplication and subtraction in the one operation */
+
+ /* lsw x -= lsw st1 * lsw q */
+ asm volatile ("mull %4; subl %%eax,%0; sbbl %%edx,%1"
+ :"=m" (((unsigned *)&x)[0]), "=m" (((unsigned *)&x)[1]),
+ "=a" (dummy)
+ :"2" (((unsigned *)&st1)[0]), "m" (((unsigned *)&q)[0])
+ :"%dx");
+ /* msw x -= msw st1 * lsw q */
+ asm volatile ("mull %3; subl %%eax,%0"
+ :"=m" (((unsigned *)&x)[1]), "=a" (dummy)
+ :"1" (((unsigned *)&st1)[1]), "m" (((unsigned *)&q)[0])
+ :"%dx");
+ /* msw x -= lsw st1 * msw q */
+ asm volatile ("mull %3; subl %%eax,%0"
+ :"=m" (((unsigned *)&x)[1]), "=a" (dummy)
+ :"1" (((unsigned *)&st1)[0]), "m" (((unsigned *)&q)[1])
+ :"%dx");
+
+ *y = x;
+}
+
+
+/* Remainder of st(0) / st(1) */
+/* This routine produces exact results, i.e. there is never any
+ rounding or truncation, etc of the result. */
+static void do_fprem(FPU_REG *st0_ptr, u_char st0_tag, int round)
+{
+ FPU_REG *st1_ptr = &st(1);
+ u_char st1_tag = FPU_gettagi(1);
+
+ if ( !((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid)) )
+ {
+ FPU_REG tmp, st0, st1;
+ u_char st0_sign, st1_sign;
+ u_char tmptag;
+ int tag;
+ int old_cw;
+ int expdif;
+ long long q;
+ unsigned short saved_status;
+ int cc;
+
+ fprem_valid:
+ /* Convert registers for internal use. */
+ st0_sign = FPU_to_exp16(st0_ptr, &st0);
+ st1_sign = FPU_to_exp16(st1_ptr, &st1);
+ expdif = exponent16(&st0) - exponent16(&st1);
+
+ old_cw = control_word;
+ cc = 0;
+
+ /* We want the status following the denorm tests, but don't want
+ the status changed by the arithmetic operations. */
+ saved_status = partial_status;
+ control_word &= ~CW_RC;
+ control_word |= RC_CHOP;
+
+ if ( expdif < 64 )
+ {
+ /* This should be the most common case */
+
+ if ( expdif > -2 )
+ {
+ u_char sign = st0_sign ^ st1_sign;
+ tag = FPU_u_div(&st0, &st1, &tmp,
+ PR_64_BITS | RC_CHOP | 0x3f,
+ sign);
+ setsign(&tmp, sign);
+
+ if ( exponent(&tmp) >= 0 )
+ {
+ FPU_round_to_int(&tmp, tag); /* Fortunately, this can't
+ overflow to 2^64 */
+ q = significand(&tmp);
+
+ rem_kernel(significand(&st0),
+ &significand(&tmp),
+ significand(&st1),
+ q, expdif);
+
+ setexponent16(&tmp, exponent16(&st1));
+ }
+ else
+ {
+ reg_copy(&st0, &tmp);
+ q = 0;
+ }
+
+ if ( (round == RC_RND) && (tmp.sigh & 0xc0000000) )
+ {
+ /* We may need to subtract st(1) once more,
+ to get a result <= 1/2 of st(1). */
+ unsigned long long x;
+ expdif = exponent16(&st1) - exponent16(&tmp);
+ if ( expdif <= 1 )
+ {
+ if ( expdif == 0 )
+ x = significand(&st1) - significand(&tmp);
+ else /* expdif is 1 */
+ x = (significand(&st1) << 1) - significand(&tmp);
+ if ( (x < significand(&tmp)) ||
+ /* or equi-distant (from 0 & st(1)) and q is odd */
+ ((x == significand(&tmp)) && (q & 1) ) )
+ {
+ st0_sign = ! st0_sign;
+ significand(&tmp) = x;
+ q++;
+ }
+ }
+ }
+
+ if (q & 4) cc |= SW_C0;
+ if (q & 2) cc |= SW_C3;
+ if (q & 1) cc |= SW_C1;
+ }
+ else
+ {
+ control_word = old_cw;
+ setcc(0);
+ return;
+ }
+ }
+ else
+ {
+ /* There is a large exponent difference ( >= 64 ) */
+ /* To make much sense, the code in this section should
+ be done at high precision. */
+ int exp_1, N;
+ u_char sign;
+
+ /* prevent overflow here */
+ /* N is 'a number between 32 and 63' (p26-113) */
+ reg_copy(&st0, &tmp);
+ tmptag = st0_tag;
+ N = (expdif & 0x0000001f) + 32; /* This choice gives results
+ identical to an AMD 486 */
+ setexponent16(&tmp, N);
+ exp_1 = exponent16(&st1);
+ setexponent16(&st1, 0);
+ expdif -= N;
+
+ sign = getsign(&tmp) ^ st1_sign;
+ tag = FPU_u_div(&tmp, &st1, &tmp, PR_64_BITS | RC_CHOP | 0x3f,
+ sign);
+ setsign(&tmp, sign);
+
+ FPU_round_to_int(&tmp, tag); /* Fortunately, this can't
+ overflow to 2^64 */
+
+ rem_kernel(significand(&st0),
+ &significand(&tmp),
+ significand(&st1),
+ significand(&tmp),
+ exponent(&tmp)
+ );
+ setexponent16(&tmp, exp_1 + expdif);
+
+ /* It is possible for the operation to be complete here.
+ What does the IEEE standard say? The Intel 80486 manual
+ implies that the operation will never be completed at this
+ point, and the behaviour of a real 80486 confirms this.
+ */
+ if ( !(tmp.sigh | tmp.sigl) )
+ {
+ /* The result is zero */
+ control_word = old_cw;
+ partial_status = saved_status;
+ FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
+ setsign(&st0, st0_sign);
+#ifdef PECULIAR_486
+ setcc(SW_C2);
+#else
+ setcc(0);
+#endif /* PECULIAR_486 */
+ return;
+ }
+ cc = SW_C2;
+ }
+
+ control_word = old_cw;
+ partial_status = saved_status;
+ tag = FPU_normalize_nuo(&tmp);
+ reg_copy(&tmp, st0_ptr);
+
+ /* The only condition to be looked for is underflow,
+ and it can occur here only if underflow is unmasked. */
+ if ( (exponent16(&tmp) <= EXP_UNDER) && (tag != TAG_Zero)
+ && !(control_word & CW_Underflow) )
+ {
+ setcc(cc);
+ tag = arith_underflow(st0_ptr);
+ setsign(st0_ptr, st0_sign);
+ FPU_settag0(tag);
+ return;
+ }
+ else if ( (exponent16(&tmp) > EXP_UNDER) || (tag == TAG_Zero) )
+ {
+ stdexp(st0_ptr);
+ setsign(st0_ptr, st0_sign);
+ }
+ else
+ {
+ tag = FPU_round(st0_ptr, 0, 0, FULL_PRECISION, st0_sign);
+ }
+ FPU_settag0(tag);
+ setcc(cc);
+
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st1_tag == TAG_Special )
+ st1_tag = FPU_Special(st1_ptr);
+
+ if ( ((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal)) )
+ {
+ if ( denormal_operand() < 0 )
+ return;
+ goto fprem_valid;
+ }
+ else if ( (st0_tag == TAG_Empty) || (st1_tag == TAG_Empty) )
+ {
+ FPU_stack_underflow();
+ return;
+ }
+ else if ( st0_tag == TAG_Zero )
+ {
+ if ( st1_tag == TAG_Valid )
+ {
+ setcc(0); return;
+ }
+ else if ( st1_tag == TW_Denormal )
+ {
+ if ( denormal_operand() < 0 )
+ return;
+ setcc(0); return;
+ }
+ else if ( st1_tag == TAG_Zero )
+ { arith_invalid(0); return; } /* fprem(?,0) always invalid */
+ else if ( st1_tag == TW_Infinity )
+ { setcc(0); return; }
+ }
+ else if ( (st0_tag == TAG_Valid) || (st0_tag == TW_Denormal) )
+ {
+ if ( st1_tag == TAG_Zero )
+ {
+ arith_invalid(0); /* fprem(Valid,Zero) is invalid */
+ return;
+ }
+ else if ( st1_tag != TW_NaN )
+ {
+ if ( ((st0_tag == TW_Denormal) || (st1_tag == TW_Denormal))
+ && (denormal_operand() < 0) )
+ return;
+
+ if ( st1_tag == TW_Infinity )
+ {
+ /* fprem(Valid,Infinity) is o.k. */
+ setcc(0); return;
+ }
+ }
+ }
+ else if ( st0_tag == TW_Infinity )
+ {
+ if ( st1_tag != TW_NaN )
+ {
+ arith_invalid(0); /* fprem(Infinity,?) is invalid */
+ return;
+ }
+ }
+
+ /* One of the registers must contain a NaN if we got here. */
+
+#ifdef PARANOID
+ if ( (st0_tag != TW_NaN) && (st1_tag != TW_NaN) )
+ EXCEPTION(EX_INTERNAL | 0x118);
+#endif /* PARANOID */
+
+ real_2op_NaN(st1_ptr, st1_tag, 0, st1_ptr);
+
+}
+
+
+/* ST(1) <- ST(1) * log ST; pop ST */
+static void fyl2x(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st1_ptr = &st(1), exponent;
+ u_char st1_tag = FPU_gettagi(1);
+ u_char sign;
+ int e, tag;
+
+ clear_C1();
+
+ if ( (st0_tag == TAG_Valid) && (st1_tag == TAG_Valid) )
+ {
+ both_valid:
+ /* Both regs are Valid or Denormal */
+ if ( signpositive(st0_ptr) )
+ {
+ if ( st0_tag == TW_Denormal )
+ FPU_to_exp16(st0_ptr, st0_ptr);
+ else
+ /* Convert st(0) for internal use. */
+ setexponent16(st0_ptr, exponent(st0_ptr));
+
+ if ( (st0_ptr->sigh == 0x80000000) && (st0_ptr->sigl == 0) )
+ {
+ /* Special case. The result can be precise. */
+ u_char esign;
+ e = exponent16(st0_ptr);
+ if ( e >= 0 )
+ {
+ exponent.sigh = e;
+ esign = SIGN_POS;
+ }
+ else
+ {
+ exponent.sigh = -e;
+ esign = SIGN_NEG;
+ }
+ exponent.sigl = 0;
+ setexponent16(&exponent, 31);
+ tag = FPU_normalize_nuo(&exponent);
+ stdexp(&exponent);
+ setsign(&exponent, esign);
+ tag = FPU_mul(&exponent, tag, 1, FULL_PRECISION);
+ if ( tag >= 0 )
+ FPU_settagi(1, tag);
+ }
+ else
+ {
+ /* The usual case */
+ sign = getsign(st1_ptr);
+ if ( st1_tag == TW_Denormal )
+ FPU_to_exp16(st1_ptr, st1_ptr);
+ else
+ /* Convert st(1) for internal use. */
+ setexponent16(st1_ptr, exponent(st1_ptr));
+ poly_l2(st0_ptr, st1_ptr, sign);
+ }
+ }
+ else
+ {
+ /* negative */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+
+ FPU_pop();
+
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st1_tag == TAG_Special )
+ st1_tag = FPU_Special(st1_ptr);
+
+ if ( (st0_tag == TAG_Empty) || (st1_tag == TAG_Empty) )
+ {
+ FPU_stack_underflow_pop(1);
+ return;
+ }
+ else if ( (st0_tag <= TW_Denormal) && (st1_tag <= TW_Denormal) )
+ {
+ if ( st0_tag == TAG_Zero )
+ {
+ if ( st1_tag == TAG_Zero )
+ {
+ /* Both args zero is invalid */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+ else
+ {
+ u_char sign;
+ sign = getsign(st1_ptr)^SIGN_NEG;
+ if ( FPU_divide_by_zero(1, sign) < 0 )
+ return;
+
+ setsign(st1_ptr, sign);
+ }
+ }
+ else if ( st1_tag == TAG_Zero )
+ {
+ /* st(1) contains zero, st(0) valid <> 0 */
+ /* Zero is the valid answer */
+ sign = getsign(st1_ptr);
+
+ if ( signnegative(st0_ptr) )
+ {
+ /* log(negative) */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+ else if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+ else
+ {
+ if ( exponent(st0_ptr) < 0 )
+ sign ^= SIGN_NEG;
+
+ FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
+ setsign(st1_ptr, sign);
+ }
+ }
+ else
+ {
+ /* One or both operands are denormals. */
+ if ( denormal_operand() < 0 )
+ return;
+ goto both_valid;
+ }
+ }
+ else if ( (st0_tag == TW_NaN) || (st1_tag == TW_NaN) )
+ {
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0 )
+ return;
+ }
+ /* One or both arg must be an infinity */
+ else if ( st0_tag == TW_Infinity )
+ {
+ if ( (signnegative(st0_ptr)) || (st1_tag == TAG_Zero) )
+ {
+ /* log(-infinity) or 0*log(infinity) */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+ else
+ {
+ u_char sign = getsign(st1_ptr);
+
+ if ( (st1_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ FPU_copy_to_reg1(&CONST_INF, TAG_Special);
+ setsign(st1_ptr, sign);
+ }
+ }
+ /* st(1) must be infinity here */
+ else if ( ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal))
+ && ( signpositive(st0_ptr) ) )
+ {
+ if ( exponent(st0_ptr) >= 0 )
+ {
+ if ( (exponent(st0_ptr) == 0) &&
+ (st0_ptr->sigh == 0x80000000) &&
+ (st0_ptr->sigl == 0) )
+ {
+ /* st(0) holds 1.0 */
+ /* infinity*log(1) */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+ /* else st(0) is positive and > 1.0 */
+ }
+ else
+ {
+ /* st(0) is positive and < 1.0 */
+
+ if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ changesign(st1_ptr);
+ }
+ }
+ else
+ {
+ /* st(0) must be zero or negative */
+ if ( st0_tag == TAG_Zero )
+ {
+ /* This should be invalid, but a real 80486 is happy with it. */
+
+#ifndef PECULIAR_486
+ sign = getsign(st1_ptr);
+ if ( FPU_divide_by_zero(1, sign) < 0 )
+ return;
+#endif /* PECULIAR_486 */
+
+ changesign(st1_ptr);
+ }
+ else if ( arith_invalid(1) < 0 ) /* log(negative) */
+ return;
+ }
+
+ FPU_pop();
+}
+
+
+static void fpatan(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st1_ptr = &st(1);
+ u_char st1_tag = FPU_gettagi(1);
+ int tag;
+
+ clear_C1();
+ if ( !((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid)) )
+ {
+ valid_atan:
+
+ poly_atan(st0_ptr, st0_tag, st1_ptr, st1_tag);
+
+ FPU_pop();
+
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st1_tag == TAG_Special )
+ st1_tag = FPU_Special(st1_ptr);
+
+ if ( ((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal)) )
+ {
+ if ( denormal_operand() < 0 )
+ return;
+
+ goto valid_atan;
+ }
+ else if ( (st0_tag == TAG_Empty) || (st1_tag == TAG_Empty) )
+ {
+ FPU_stack_underflow_pop(1);
+ return;
+ }
+ else if ( (st0_tag == TW_NaN) || (st1_tag == TW_NaN) )
+ {
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) >= 0 )
+ FPU_pop();
+ return;
+ }
+ else if ( (st0_tag == TW_Infinity) || (st1_tag == TW_Infinity) )
+ {
+ u_char sign = getsign(st1_ptr);
+ if ( st0_tag == TW_Infinity )
+ {
+ if ( st1_tag == TW_Infinity )
+ {
+ if ( signpositive(st0_ptr) )
+ {
+ FPU_copy_to_reg1(&CONST_PI4, TAG_Valid);
+ }
+ else
+ {
+ setpositive(st1_ptr);
+ tag = FPU_u_add(&CONST_PI4, &CONST_PI2, st1_ptr,
+ FULL_PRECISION, SIGN_POS,
+ exponent(&CONST_PI4), exponent(&CONST_PI2));
+ if ( tag >= 0 )
+ FPU_settagi(1, tag);
+ }
+ }
+ else
+ {
+ if ( (st1_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ if ( signpositive(st0_ptr) )
+ {
+ FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
+ setsign(st1_ptr, sign); /* An 80486 preserves the sign */
+ FPU_pop();
+ return;
+ }
+ else
+ {
+ FPU_copy_to_reg1(&CONST_PI, TAG_Valid);
+ }
+ }
+ }
+ else
+ {
+ /* st(1) is infinity, st(0) not infinity */
+ if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ FPU_copy_to_reg1(&CONST_PI2, TAG_Valid);
+ }
+ setsign(st1_ptr, sign);
+ }
+ else if ( st1_tag == TAG_Zero )
+ {
+ /* st(0) must be valid or zero */
+ u_char sign = getsign(st1_ptr);
+
+ if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ if ( signpositive(st0_ptr) )
+ {
+ /* An 80486 preserves the sign */
+ FPU_pop();
+ return;
+ }
+
+ FPU_copy_to_reg1(&CONST_PI, TAG_Valid);
+ setsign(st1_ptr, sign);
+ }
+ else if ( st0_tag == TAG_Zero )
+ {
+ /* st(1) must be TAG_Valid here */
+ u_char sign = getsign(st1_ptr);
+
+ if ( (st1_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ FPU_copy_to_reg1(&CONST_PI2, TAG_Valid);
+ setsign(st1_ptr, sign);
+ }
+#ifdef PARANOID
+ else
+ EXCEPTION(EX_INTERNAL | 0x125);
+#endif /* PARANOID */
+
+ FPU_pop();
+ set_precision_flag_up(); /* We do not really know if up or down */
+}
+
+
+static void fprem(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ do_fprem(st0_ptr, st0_tag, RC_CHOP);
+}
+
+
+static void fprem1(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ do_fprem(st0_ptr, st0_tag, RC_RND);
+}
+
+
+static void fyl2xp1(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ u_char sign, sign1;
+ FPU_REG *st1_ptr = &st(1), a, b;
+ u_char st1_tag = FPU_gettagi(1);
+
+ clear_C1();
+ if ( !((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid)) )
+ {
+ valid_yl2xp1:
+
+ sign = getsign(st0_ptr);
+ sign1 = getsign(st1_ptr);
+
+ FPU_to_exp16(st0_ptr, &a);
+ FPU_to_exp16(st1_ptr, &b);
+
+ if ( poly_l2p1(sign, sign1, &a, &b, st1_ptr) )
+ return;
+
+ FPU_pop();
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st1_tag == TAG_Special )
+ st1_tag = FPU_Special(st1_ptr);
+
+ if ( ((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
+ || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal)) )
+ {
+ if ( denormal_operand() < 0 )
+ return;
+
+ goto valid_yl2xp1;
+ }
+ else if ( (st0_tag == TAG_Empty) | (st1_tag == TAG_Empty) )
+ {
+ FPU_stack_underflow_pop(1);
+ return;
+ }
+ else if ( st0_tag == TAG_Zero )
+ {
+ switch ( st1_tag )
+ {
+ case TW_Denormal:
+ if ( denormal_operand() < 0 )
+ return;
+
+ case TAG_Zero:
+ case TAG_Valid:
+ setsign(st0_ptr, getsign(st0_ptr) ^ getsign(st1_ptr));
+ FPU_copy_to_reg1(st0_ptr, st0_tag);
+ break;
+
+ case TW_Infinity:
+ /* Infinity*log(1) */
+ if ( arith_invalid(1) < 0 )
+ return;
+ break;
+
+ case TW_NaN:
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0 )
+ return;
+ break;
+
+ default:
+#ifdef PARANOID
+ EXCEPTION(EX_INTERNAL | 0x116);
+ return;
+#endif /* PARANOID */
+ break;
+ }
+ }
+ else if ( (st0_tag == TAG_Valid) || (st0_tag == TW_Denormal) )
+ {
+ switch ( st1_tag )
+ {
+ case TAG_Zero:
+ if ( signnegative(st0_ptr) )
+ {
+ if ( exponent(st0_ptr) >= 0 )
+ {
+ /* st(0) holds <= -1.0 */
+#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
+ changesign(st1_ptr);
+#else
+ if ( arith_invalid(1) < 0 )
+ return;
+#endif /* PECULIAR_486 */
+ }
+ else if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+ else
+ changesign(st1_ptr);
+ }
+ else if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+ break;
+
+ case TW_Infinity:
+ if ( signnegative(st0_ptr) )
+ {
+ if ( (exponent(st0_ptr) >= 0) &&
+ !((st0_ptr->sigh == 0x80000000) &&
+ (st0_ptr->sigl == 0)) )
+ {
+ /* st(0) holds < -1.0 */
+#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
+ changesign(st1_ptr);
+#else
+ if ( arith_invalid(1) < 0 ) return;
+#endif /* PECULIAR_486 */
+ }
+ else if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+ else
+ changesign(st1_ptr);
+ }
+ else if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+ break;
+
+ case TW_NaN:
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0 )
+ return;
+ }
+
+ }
+ else if ( st0_tag == TW_NaN )
+ {
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0 )
+ return;
+ }
+ else if ( st0_tag == TW_Infinity )
+ {
+ if ( st1_tag == TW_NaN )
+ {
+ if ( real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0 )
+ return;
+ }
+ else if ( signnegative(st0_ptr) )
+ {
+#ifndef PECULIAR_486
+ /* This should have higher priority than denormals, but... */
+ if ( arith_invalid(1) < 0 ) /* log(-infinity) */
+ return;
+#endif /* PECULIAR_486 */
+ if ( (st1_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+#ifdef PECULIAR_486
+ /* Denormal operands actually get higher priority */
+ if ( arith_invalid(1) < 0 ) /* log(-infinity) */
+ return;
+#endif /* PECULIAR_486 */
+ }
+ else if ( st1_tag == TAG_Zero )
+ {
+ /* log(infinity) */
+ if ( arith_invalid(1) < 0 )
+ return;
+ }
+
+ /* st(1) must be valid here. */
+
+ else if ( (st1_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ /* The Manual says that log(Infinity) is invalid, but a real
+ 80486 sensibly says that it is o.k. */
+ else
+ {
+ u_char sign = getsign(st1_ptr);
+ FPU_copy_to_reg1(&CONST_INF, TAG_Special);
+ setsign(st1_ptr, sign);
+ }
+ }
+#ifdef PARANOID
+ else
+ {
+ EXCEPTION(EX_INTERNAL | 0x117);
+ return;
+ }
+#endif /* PARANOID */
+
+ FPU_pop();
+ return;
+
+}
+
+
+static void fscale(FPU_REG *st0_ptr, u_char st0_tag)
+{
+ FPU_REG *st1_ptr = &st(1);
+ u_char st1_tag = FPU_gettagi(1);
+ int old_cw = control_word;
+ u_char sign = getsign(st0_ptr);
+
+ clear_C1();
+ if ( !((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid)) )
+ {
+ long scale;
+ FPU_REG tmp;
+
+ /* Convert register for internal use. */
+ setexponent16(st0_ptr, exponent(st0_ptr));
+
+ valid_scale:
+
+ if ( exponent(st1_ptr) > 30 )
+ {
+ /* 2^31 is far too large, would require 2^(2^30) or 2^(-2^30) */
+
+ if ( signpositive(st1_ptr) )
+ {
+ EXCEPTION(EX_Overflow);
+ FPU_copy_to_reg0(&CONST_INF, TAG_Special);
+ }
+ else
+ {
+ EXCEPTION(EX_Underflow);
+ FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
+ }
+ setsign(st0_ptr, sign);
+ return;
+ }
+
+ control_word &= ~CW_RC;
+ control_word |= RC_CHOP;
+ reg_copy(st1_ptr, &tmp);
+ FPU_round_to_int(&tmp, st1_tag); /* This can never overflow here */
+ control_word = old_cw;
+ scale = signnegative(st1_ptr) ? -tmp.sigl : tmp.sigl;
+ scale += exponent16(st0_ptr);
+
+ setexponent16(st0_ptr, scale);
+
+ /* Use FPU_round() to properly detect under/overflow etc */
+ FPU_round(st0_ptr, 0, 0, control_word, sign);
+
+ return;
+ }
+
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st1_tag == TAG_Special )
+ st1_tag = FPU_Special(st1_ptr);
+
+ if ( (st0_tag == TAG_Valid) || (st0_tag == TW_Denormal) )
+ {
+ switch ( st1_tag )
+ {
+ case TAG_Valid:
+ /* st(0) must be a denormal */
+ if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ FPU_to_exp16(st0_ptr, st0_ptr); /* Will not be left on stack */
+ goto valid_scale;
+
+ case TAG_Zero:
+ if ( st0_tag == TW_Denormal )
+ denormal_operand();
+ return;
+
+ case TW_Denormal:
+ denormal_operand();
+ return;
+
+ case TW_Infinity:
+ if ( (st0_tag == TW_Denormal) && (denormal_operand() < 0) )
+ return;
+
+ if ( signpositive(st1_ptr) )
+ FPU_copy_to_reg0(&CONST_INF, TAG_Special);
+ else
+ FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
+ setsign(st0_ptr, sign);
+ return;
+
+ case TW_NaN:
+ real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
+ return;
+ }
+ }
+ else if ( st0_tag == TAG_Zero )
+ {
+ switch ( st1_tag )
+ {
+ case TAG_Valid:
+ case TAG_Zero:
+ return;
+
+ case TW_Denormal:
+ denormal_operand();
+ return;
+
+ case TW_Infinity:
+ if ( signpositive(st1_ptr) )
+ arith_invalid(0); /* Zero scaled by +Infinity */
+ return;
+
+ case TW_NaN:
+ real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
+ return;
+ }
+ }
+ else if ( st0_tag == TW_Infinity )
+ {
+ switch ( st1_tag )
+ {
+ case TAG_Valid:
+ case TAG_Zero:
+ return;
+
+ case TW_Denormal:
+ denormal_operand();
+ return;
+
+ case TW_Infinity:
+ if ( signnegative(st1_ptr) )
+ arith_invalid(0); /* Infinity scaled by -Infinity */
+ return;
+
+ case TW_NaN:
+ real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
+ return;
+ }
+ }
+ else if ( st0_tag == TW_NaN )
+ {
+ if ( st1_tag != TAG_Empty )
+ { real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr); return; }
+ }
+
+#ifdef PARANOID
+ if ( !((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) )
+ {
+ EXCEPTION(EX_INTERNAL | 0x115);
+ return;
+ }
+#endif
+
+ /* At least one of st(0), st(1) must be empty */
+ FPU_stack_underflow();
+
+}
+
+
+/*---------------------------------------------------------------------------*/
+
+static FUNC_ST0 const trig_table_a[] = {
+ f2xm1, fyl2x, fptan, fpatan,
+ fxtract, fprem1, (FUNC_ST0)fdecstp, (FUNC_ST0)fincstp
+};
+
+void FPU_triga(void)
+{
+ (trig_table_a[FPU_rm])(&st(0), FPU_gettag0());
+}
+
+
+static FUNC_ST0 const trig_table_b[] =
+ {
+ fprem, fyl2xp1, fsqrt_, fsincos, frndint_, fscale, (FUNC_ST0)fsin, fcos
+ };
+
+void FPU_trigb(void)
+{
+ (trig_table_b[FPU_rm])(&st(0), FPU_gettag0());
+}
diff --git a/arch/i386/math-emu/get_address.c b/arch/i386/math-emu/get_address.c
new file mode 100644
index 0000000..9117573
--- /dev/null
+++ b/arch/i386/math-emu/get_address.c
@@ -0,0 +1,449 @@
+/*---------------------------------------------------------------------------+
+ | get_address.c |
+ | |
+ | Get the effective address from an FPU instruction. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+
+#include <linux/stddef.h>
+
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+
+
+#define FPU_WRITE_BIT 0x10
+
+static int reg_offset[] = {
+ offsetof(struct info,___eax),
+ offsetof(struct info,___ecx),
+ offsetof(struct info,___edx),
+ offsetof(struct info,___ebx),
+ offsetof(struct info,___esp),
+ offsetof(struct info,___ebp),
+ offsetof(struct info,___esi),
+ offsetof(struct info,___edi)
+};
+
+#define REG_(x) (*(long *)(reg_offset[(x)]+(u_char *) FPU_info))
+
+static int reg_offset_vm86[] = {
+ offsetof(struct info,___cs),
+ offsetof(struct info,___vm86_ds),
+ offsetof(struct info,___vm86_es),
+ offsetof(struct info,___vm86_fs),
+ offsetof(struct info,___vm86_gs),
+ offsetof(struct info,___ss),
+ offsetof(struct info,___vm86_ds)
+ };
+
+#define VM86_REG_(x) (*(unsigned short *) \
+ (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info))
+
+/* These are dummy, fs and gs are not saved on the stack. */
+#define ___FS ___ds
+#define ___GS ___ds
+
+static int reg_offset_pm[] = {
+ offsetof(struct info,___cs),
+ offsetof(struct info,___ds),
+ offsetof(struct info,___es),
+ offsetof(struct info,___FS),
+ offsetof(struct info,___GS),
+ offsetof(struct info,___ss),
+ offsetof(struct info,___ds)
+ };
+
+#define PM_REG_(x) (*(unsigned short *) \
+ (reg_offset_pm[((unsigned)x)]+(u_char *) FPU_info))
+
+
+/* Decode the SIB byte. This function assumes mod != 0 */
+static int sib(int mod, unsigned long *fpu_eip)
+{
+ u_char ss,index,base;
+ long offset;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(base, (u_char __user *) (*fpu_eip)); /* The SIB byte */
+ RE_ENTRANT_CHECK_ON;
+ (*fpu_eip)++;
+ ss = base >> 6;
+ index = (base >> 3) & 7;
+ base &= 7;
+
+ if ((mod == 0) && (base == 5))
+ offset = 0; /* No base register */
+ else
+ offset = REG_(base);
+
+ if (index == 4)
+ {
+ /* No index register */
+ /* A non-zero ss is illegal */
+ if ( ss )
+ EXCEPTION(EX_Invalid);
+ }
+ else
+ {
+ offset += (REG_(index)) << ss;
+ }
+
+ if (mod == 1)
+ {
+ /* 8 bit signed displacement */
+ long displacement;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(displacement, (signed char __user *) (*fpu_eip));
+ offset += displacement;
+ RE_ENTRANT_CHECK_ON;
+ (*fpu_eip)++;
+ }
+ else if (mod == 2 || base == 5) /* The second condition also has mod==0 */
+ {
+ /* 32 bit displacement */
+ long displacement;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(4);
+ FPU_get_user(displacement, (long __user *) (*fpu_eip));
+ offset += displacement;
+ RE_ENTRANT_CHECK_ON;
+ (*fpu_eip) += 4;
+ }
+
+ return offset;
+}
+
+
+static unsigned long vm86_segment(u_char segment,
+ struct address *addr)
+{
+ segment--;
+#ifdef PARANOID
+ if ( segment > PREFIX_SS_ )
+ {
+ EXCEPTION(EX_INTERNAL|0x130);
+ math_abort(FPU_info,SIGSEGV);
+ }
+#endif /* PARANOID */
+ addr->selector = VM86_REG_(segment);
+ return (unsigned long)VM86_REG_(segment) << 4;
+}
+
+
+/* This should work for 16 and 32 bit protected mode. */
+static long pm_address(u_char FPU_modrm, u_char segment,
+ struct address *addr, long offset)
+{
+ struct desc_struct descriptor;
+ unsigned long base_address, limit, address, seg_top;
+ unsigned short selector;
+
+ segment--;
+
+#ifdef PARANOID
+ /* segment is unsigned, so this also detects if segment was 0: */
+ if ( segment > PREFIX_SS_ )
+ {
+ EXCEPTION(EX_INTERNAL|0x132);
+ math_abort(FPU_info,SIGSEGV);
+ }
+#endif /* PARANOID */
+
+ switch ( segment )
+ {
+ /* fs and gs aren't used by the kernel, so they still have their
+ user-space values. */
+ case PREFIX_FS_-1:
+ /* The cast is needed here to get gcc 2.8.0 to use a 16 bit register
+ in the assembler statement. */
+
+ __asm__("mov %%fs,%0":"=r" (selector));
+ addr->selector = selector;
+ break;
+ case PREFIX_GS_-1:
+ /* The cast is needed here to get gcc 2.8.0 to use a 16 bit register
+ in the assembler statement. */
+ __asm__("mov %%gs,%0":"=r" (selector));
+ addr->selector = selector;
+ break;
+ default:
+ addr->selector = PM_REG_(segment);
+ }
+
+ descriptor = LDT_DESCRIPTOR(PM_REG_(segment));
+ base_address = SEG_BASE_ADDR(descriptor);
+ address = base_address + offset;
+ limit = base_address
+ + (SEG_LIMIT(descriptor)+1) * SEG_GRANULARITY(descriptor) - 1;
+ if ( limit < base_address ) limit = 0xffffffff;
+
+ if ( SEG_EXPAND_DOWN(descriptor) )
+ {
+ if ( SEG_G_BIT(descriptor) )
+ seg_top = 0xffffffff;
+ else
+ {
+ seg_top = base_address + (1 << 20);
+ if ( seg_top < base_address ) seg_top = 0xffffffff;
+ }
+ access_limit =
+ (address <= limit) || (address >= seg_top) ? 0 :
+ ((seg_top-address) >= 255 ? 255 : seg_top-address);
+ }
+ else
+ {
+ access_limit =
+ (address > limit) || (address < base_address) ? 0 :
+ ((limit-address) >= 254 ? 255 : limit-address+1);
+ }
+ if ( SEG_EXECUTE_ONLY(descriptor) ||
+ (!SEG_WRITE_PERM(descriptor) && (FPU_modrm & FPU_WRITE_BIT)) )
+ {
+ access_limit = 0;
+ }
+ return address;
+}
+
+
+/*
+ MOD R/M byte: MOD == 3 has a special use for the FPU
+ SIB byte used iff R/M = 100b
+
+ 7 6 5 4 3 2 1 0
+ ..... ......... .........
+ MOD OPCODE(2) R/M
+
+
+ SIB byte
+
+ 7 6 5 4 3 2 1 0
+ ..... ......... .........
+ SS INDEX BASE
+
+*/
+
+void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip,
+ struct address *addr,
+ fpu_addr_modes addr_modes)
+{
+ u_char mod;
+ unsigned rm = FPU_modrm & 7;
+ long *cpu_reg_ptr;
+ int address = 0; /* Initialized just to stop compiler warnings. */
+
+ /* Memory accessed via the cs selector is write protected
+ in `non-segmented' 32 bit protected mode. */
+ if ( !addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
+ && (addr_modes.override.segment == PREFIX_CS_) )
+ {
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
+
+ mod = (FPU_modrm >> 6) & 3;
+
+ if (rm == 4 && mod != 3)
+ {
+ address = sib(mod, fpu_eip);
+ }
+ else
+ {
+ cpu_reg_ptr = & REG_(rm);
+ switch (mod)
+ {
+ case 0:
+ if (rm == 5)
+ {
+ /* Special case: disp32 */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(4);
+ FPU_get_user(address, (unsigned long __user *) (*fpu_eip));
+ (*fpu_eip) += 4;
+ RE_ENTRANT_CHECK_ON;
+ addr->offset = address;
+ return (void __user *) address;
+ }
+ else
+ {
+ address = *cpu_reg_ptr; /* Just return the contents
+ of the cpu register */
+ addr->offset = address;
+ return (void __user *) address;
+ }
+ case 1:
+ /* 8 bit signed displacement */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(address, (signed char __user *) (*fpu_eip));
+ RE_ENTRANT_CHECK_ON;
+ (*fpu_eip)++;
+ break;
+ case 2:
+ /* 32 bit displacement */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(4);
+ FPU_get_user(address, (long __user *) (*fpu_eip));
+ (*fpu_eip) += 4;
+ RE_ENTRANT_CHECK_ON;
+ break;
+ case 3:
+ /* Not legal for the FPU */
+ EXCEPTION(EX_Invalid);
+ }
+ address += *cpu_reg_ptr;
+ }
+
+ addr->offset = address;
+
+ switch ( addr_modes.default_mode )
+ {
+ case 0:
+ break;
+ case VM86:
+ address += vm86_segment(addr_modes.override.segment, addr);
+ break;
+ case PM16:
+ case SEG32:
+ address = pm_address(FPU_modrm, addr_modes.override.segment,
+ addr, address);
+ break;
+ default:
+ EXCEPTION(EX_INTERNAL|0x133);
+ }
+
+ return (void __user *)address;
+}
+
+
+void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip,
+ struct address *addr,
+ fpu_addr_modes addr_modes)
+{
+ u_char mod;
+ unsigned rm = FPU_modrm & 7;
+ int address = 0; /* Default used for mod == 0 */
+
+ /* Memory accessed via the cs selector is write protected
+ in `non-segmented' 32 bit protected mode. */
+ if ( !addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
+ && (addr_modes.override.segment == PREFIX_CS_) )
+ {
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
+
+ mod = (FPU_modrm >> 6) & 3;
+
+ switch (mod)
+ {
+ case 0:
+ if (rm == 6)
+ {
+ /* Special case: disp16 */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(2);
+ FPU_get_user(address, (unsigned short __user *) (*fpu_eip));
+ (*fpu_eip) += 2;
+ RE_ENTRANT_CHECK_ON;
+ goto add_segment;
+ }
+ break;
+ case 1:
+ /* 8 bit signed displacement */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(address, (signed char __user *) (*fpu_eip));
+ RE_ENTRANT_CHECK_ON;
+ (*fpu_eip)++;
+ break;
+ case 2:
+ /* 16 bit displacement */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(2);
+ FPU_get_user(address, (unsigned short __user *) (*fpu_eip));
+ (*fpu_eip) += 2;
+ RE_ENTRANT_CHECK_ON;
+ break;
+ case 3:
+ /* Not legal for the FPU */
+ EXCEPTION(EX_Invalid);
+ break;
+ }
+ switch ( rm )
+ {
+ case 0:
+ address += FPU_info->___ebx + FPU_info->___esi;
+ break;
+ case 1:
+ address += FPU_info->___ebx + FPU_info->___edi;
+ break;
+ case 2:
+ address += FPU_info->___ebp + FPU_info->___esi;
+ if ( addr_modes.override.segment == PREFIX_DEFAULT )
+ addr_modes.override.segment = PREFIX_SS_;
+ break;
+ case 3:
+ address += FPU_info->___ebp + FPU_info->___edi;
+ if ( addr_modes.override.segment == PREFIX_DEFAULT )
+ addr_modes.override.segment = PREFIX_SS_;
+ break;
+ case 4:
+ address += FPU_info->___esi;
+ break;
+ case 5:
+ address += FPU_info->___edi;
+ break;
+ case 6:
+ address += FPU_info->___ebp;
+ if ( addr_modes.override.segment == PREFIX_DEFAULT )
+ addr_modes.override.segment = PREFIX_SS_;
+ break;
+ case 7:
+ address += FPU_info->___ebx;
+ break;
+ }
+
+ add_segment:
+ address &= 0xffff;
+
+ addr->offset = address;
+
+ switch ( addr_modes.default_mode )
+ {
+ case 0:
+ break;
+ case VM86:
+ address += vm86_segment(addr_modes.override.segment, addr);
+ break;
+ case PM16:
+ case SEG32:
+ address = pm_address(FPU_modrm, addr_modes.override.segment,
+ addr, address);
+ break;
+ default:
+ EXCEPTION(EX_INTERNAL|0x131);
+ }
+
+ return (void __user *)address ;
+}
diff --git a/arch/i386/math-emu/load_store.c b/arch/i386/math-emu/load_store.c
new file mode 100644
index 0000000..85314be
--- /dev/null
+++ b/arch/i386/math-emu/load_store.c
@@ -0,0 +1,270 @@
+/*---------------------------------------------------------------------------+
+ | load_store.c |
+ | |
+ | This file contains most of the code to interpret the FPU instructions |
+ | which load and store from user memory. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+#include <asm/uaccess.h>
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+#include "status_w.h"
+#include "control_w.h"
+
+
+#define _NONE_ 0 /* st0_ptr etc not needed */
+#define _REG0_ 1 /* Will be storing st(0) */
+#define _PUSH_ 3 /* Need to check for space to push onto stack */
+#define _null_ 4 /* Function illegal or not implemented */
+
+#define pop_0() { FPU_settag0(TAG_Empty); top++; }
+
+
+static u_char const type_table[32] = {
+ _PUSH_, _PUSH_, _PUSH_, _PUSH_,
+ _null_, _null_, _null_, _null_,
+ _REG0_, _REG0_, _REG0_, _REG0_,
+ _REG0_, _REG0_, _REG0_, _REG0_,
+ _NONE_, _null_, _NONE_, _PUSH_,
+ _NONE_, _PUSH_, _null_, _PUSH_,
+ _NONE_, _null_, _NONE_, _REG0_,
+ _NONE_, _REG0_, _NONE_, _REG0_
+ };
+
+u_char const data_sizes_16[32] = {
+ 4, 4, 8, 2, 0, 0, 0, 0,
+ 4, 4, 8, 2, 4, 4, 8, 2,
+ 14, 0, 94, 10, 2, 10, 0, 8,
+ 14, 0, 94, 10, 2, 10, 2, 8
+};
+
+static u_char const data_sizes_32[32] = {
+ 4, 4, 8, 2, 0, 0, 0, 0,
+ 4, 4, 8, 2, 4, 4, 8, 2,
+ 28, 0,108, 10, 2, 10, 0, 8,
+ 28, 0,108, 10, 2, 10, 2, 8
+};
+
+int FPU_load_store(u_char type, fpu_addr_modes addr_modes,
+ void __user *data_address)
+{
+ FPU_REG loaded_data;
+ FPU_REG *st0_ptr;
+ u_char st0_tag = TAG_Empty; /* This is just to stop a gcc warning. */
+ u_char loaded_tag;
+
+ st0_ptr = NULL; /* Initialized just to stop compiler warnings. */
+
+ if ( addr_modes.default_mode & PROTECTED )
+ {
+ if ( addr_modes.default_mode == SEG32 )
+ {
+ if ( access_limit < data_sizes_32[type] )
+ math_abort(FPU_info,SIGSEGV);
+ }
+ else if ( addr_modes.default_mode == PM16 )
+ {
+ if ( access_limit < data_sizes_16[type] )
+ math_abort(FPU_info,SIGSEGV);
+ }
+#ifdef PARANOID
+ else
+ EXCEPTION(EX_INTERNAL|0x140);
+#endif /* PARANOID */
+ }
+
+ switch ( type_table[type] )
+ {
+ case _NONE_:
+ break;
+ case _REG0_:
+ st0_ptr = &st(0); /* Some of these instructions pop after
+ storing */
+ st0_tag = FPU_gettag0();
+ break;
+ case _PUSH_:
+ {
+ if ( FPU_gettagi(-1) != TAG_Empty )
+ { FPU_stack_overflow(); return 0; }
+ top--;
+ st0_ptr = &st(0);
+ }
+ break;
+ case _null_:
+ FPU_illegal();
+ return 0;
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x141);
+ return 0;
+#endif /* PARANOID */
+ }
+
+ switch ( type )
+ {
+ case 000: /* fld m32real */
+ clear_C1();
+ loaded_tag = FPU_load_single((float __user *)data_address, &loaded_data);
+ if ( (loaded_tag == TAG_Special)
+ && isNaN(&loaded_data)
+ && (real_1op_NaN(&loaded_data) < 0) )
+ {
+ top++;
+ break;
+ }
+ FPU_copy_to_reg0(&loaded_data, loaded_tag);
+ break;
+ case 001: /* fild m32int */
+ clear_C1();
+ loaded_tag = FPU_load_int32((long __user *)data_address, &loaded_data);
+ FPU_copy_to_reg0(&loaded_data, loaded_tag);
+ break;
+ case 002: /* fld m64real */
+ clear_C1();
+ loaded_tag = FPU_load_double((double __user *)data_address, &loaded_data);
+ if ( (loaded_tag == TAG_Special)
+ && isNaN(&loaded_data)
+ && (real_1op_NaN(&loaded_data) < 0) )
+ {
+ top++;
+ break;
+ }
+ FPU_copy_to_reg0(&loaded_data, loaded_tag);
+ break;
+ case 003: /* fild m16int */
+ clear_C1();
+ loaded_tag = FPU_load_int16((short __user *)data_address, &loaded_data);
+ FPU_copy_to_reg0(&loaded_data, loaded_tag);
+ break;
+ case 010: /* fst m32real */
+ clear_C1();
+ FPU_store_single(st0_ptr, st0_tag, (float __user *)data_address);
+ break;
+ case 011: /* fist m32int */
+ clear_C1();
+ FPU_store_int32(st0_ptr, st0_tag, (long __user *)data_address);
+ break;
+ case 012: /* fst m64real */
+ clear_C1();
+ FPU_store_double(st0_ptr, st0_tag, (double __user *)data_address);
+ break;
+ case 013: /* fist m16int */
+ clear_C1();
+ FPU_store_int16(st0_ptr, st0_tag, (short __user *)data_address);
+ break;
+ case 014: /* fstp m32real */
+ clear_C1();
+ if ( FPU_store_single(st0_ptr, st0_tag, (float __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 015: /* fistp m32int */
+ clear_C1();
+ if ( FPU_store_int32(st0_ptr, st0_tag, (long __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 016: /* fstp m64real */
+ clear_C1();
+ if ( FPU_store_double(st0_ptr, st0_tag, (double __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 017: /* fistp m16int */
+ clear_C1();
+ if ( FPU_store_int16(st0_ptr, st0_tag, (short __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 020: /* fldenv m14/28byte */
+ fldenv(addr_modes, (u_char __user *)data_address);
+ /* Ensure that the values just loaded are not changed by
+ fix-up operations. */
+ return 1;
+ case 022: /* frstor m94/108byte */
+ frstor(addr_modes, (u_char __user *)data_address);
+ /* Ensure that the values just loaded are not changed by
+ fix-up operations. */
+ return 1;
+ case 023: /* fbld m80dec */
+ clear_C1();
+ loaded_tag = FPU_load_bcd((u_char __user *)data_address);
+ FPU_settag0(loaded_tag);
+ break;
+ case 024: /* fldcw */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, data_address, 2);
+ FPU_get_user(control_word, (unsigned short __user *) data_address);
+ RE_ENTRANT_CHECK_ON;
+ if ( partial_status & ~control_word & CW_Exceptions )
+ partial_status |= (SW_Summary | SW_Backward);
+ else
+ partial_status &= ~(SW_Summary | SW_Backward);
+#ifdef PECULIAR_486
+ control_word |= 0x40; /* An 80486 appears to always set this bit */
+#endif /* PECULIAR_486 */
+ return 1;
+ case 025: /* fld m80real */
+ clear_C1();
+ loaded_tag = FPU_load_extended((long double __user *)data_address, 0);
+ FPU_settag0(loaded_tag);
+ break;
+ case 027: /* fild m64int */
+ clear_C1();
+ loaded_tag = FPU_load_int64((long long __user *)data_address);
+ FPU_settag0(loaded_tag);
+ break;
+ case 030: /* fstenv m14/28byte */
+ fstenv(addr_modes, (u_char __user *)data_address);
+ return 1;
+ case 032: /* fsave */
+ fsave(addr_modes, (u_char __user *)data_address);
+ return 1;
+ case 033: /* fbstp m80dec */
+ clear_C1();
+ if ( FPU_store_bcd(st0_ptr, st0_tag, (u_char __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 034: /* fstcw m16int */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,data_address,2);
+ FPU_put_user(control_word, (unsigned short __user *) data_address);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ case 035: /* fstp m80real */
+ clear_C1();
+ if ( FPU_store_extended(st0_ptr, st0_tag, (long double __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ case 036: /* fstsw m2byte */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,data_address,2);
+ FPU_put_user(status_word(),(unsigned short __user *) data_address);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ case 037: /* fistp m64int */
+ clear_C1();
+ if ( FPU_store_int64(st0_ptr, st0_tag, (long long __user *)data_address) )
+ pop_0(); /* pop only if the number was actually stored
+ (see the 80486 manual p16-28) */
+ break;
+ }
+ return 0;
+}
diff --git a/arch/i386/math-emu/mul_Xsig.S b/arch/i386/math-emu/mul_Xsig.S
new file mode 100644
index 0000000..717785a
--- /dev/null
+++ b/arch/i386/math-emu/mul_Xsig.S
@@ -0,0 +1,176 @@
+/*---------------------------------------------------------------------------+
+ | mul_Xsig.S |
+ | |
+ | Multiply a 12 byte fixed point number by another fixed point number. |
+ | |
+ | Copyright (C) 1992,1994,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Call from C as: |
+ | void mul32_Xsig(Xsig *x, unsigned b) |
+ | |
+ | void mul64_Xsig(Xsig *x, unsigned long long *b) |
+ | |
+ | void mul_Xsig_Xsig(Xsig *x, unsigned *b) |
+ | |
+ | The result is neither rounded nor normalized, and the ls bit or so may |
+ | be wrong. |
+ | |
+ +---------------------------------------------------------------------------*/
+ .file "mul_Xsig.S"
+
+
+#include "fpu_emu.h"
+
+.text
+ENTRY(mul32_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ subl $16,%esp
+ pushl %esi
+
+ movl PARAM1,%esi
+ movl PARAM2,%ecx
+
+ xor %eax,%eax
+ movl %eax,-4(%ebp)
+ movl %eax,-8(%ebp)
+
+ movl (%esi),%eax /* lsl of Xsig */
+ mull %ecx /* msl of b */
+ movl %edx,-12(%ebp)
+
+ movl 4(%esi),%eax /* midl of Xsig */
+ mull %ecx /* msl of b */
+ addl %eax,-12(%ebp)
+ adcl %edx,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull %ecx /* msl of b */
+ addl %eax,-8(%ebp)
+ adcl %edx,-4(%ebp)
+
+ movl -12(%ebp),%eax
+ movl %eax,(%esi)
+ movl -8(%ebp),%eax
+ movl %eax,4(%esi)
+ movl -4(%ebp),%eax
+ movl %eax,8(%esi)
+
+ popl %esi
+ leave
+ ret
+
+
+ENTRY(mul64_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ subl $16,%esp
+ pushl %esi
+
+ movl PARAM1,%esi
+ movl PARAM2,%ecx
+
+ xor %eax,%eax
+ movl %eax,-4(%ebp)
+ movl %eax,-8(%ebp)
+
+ movl (%esi),%eax /* lsl of Xsig */
+ mull 4(%ecx) /* msl of b */
+ movl %edx,-12(%ebp)
+
+ movl 4(%esi),%eax /* midl of Xsig */
+ mull (%ecx) /* lsl of b */
+ addl %edx,-12(%ebp)
+ adcl $0,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 4(%esi),%eax /* midl of Xsig */
+ mull 4(%ecx) /* msl of b */
+ addl %eax,-12(%ebp)
+ adcl %edx,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull (%ecx) /* lsl of b */
+ addl %eax,-12(%ebp)
+ adcl %edx,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull 4(%ecx) /* msl of b */
+ addl %eax,-8(%ebp)
+ adcl %edx,-4(%ebp)
+
+ movl -12(%ebp),%eax
+ movl %eax,(%esi)
+ movl -8(%ebp),%eax
+ movl %eax,4(%esi)
+ movl -4(%ebp),%eax
+ movl %eax,8(%esi)
+
+ popl %esi
+ leave
+ ret
+
+
+
+ENTRY(mul_Xsig_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ subl $16,%esp
+ pushl %esi
+
+ movl PARAM1,%esi
+ movl PARAM2,%ecx
+
+ xor %eax,%eax
+ movl %eax,-4(%ebp)
+ movl %eax,-8(%ebp)
+
+ movl (%esi),%eax /* lsl of Xsig */
+ mull 8(%ecx) /* msl of b */
+ movl %edx,-12(%ebp)
+
+ movl 4(%esi),%eax /* midl of Xsig */
+ mull 4(%ecx) /* midl of b */
+ addl %edx,-12(%ebp)
+ adcl $0,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull (%ecx) /* lsl of b */
+ addl %edx,-12(%ebp)
+ adcl $0,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 4(%esi),%eax /* midl of Xsig */
+ mull 8(%ecx) /* msl of b */
+ addl %eax,-12(%ebp)
+ adcl %edx,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull 4(%ecx) /* midl of b */
+ addl %eax,-12(%ebp)
+ adcl %edx,-8(%ebp)
+ adcl $0,-4(%ebp)
+
+ movl 8(%esi),%eax /* msl of Xsig */
+ mull 8(%ecx) /* msl of b */
+ addl %eax,-8(%ebp)
+ adcl %edx,-4(%ebp)
+
+ movl -12(%ebp),%edx
+ movl %edx,(%esi)
+ movl -8(%ebp),%edx
+ movl %edx,4(%esi)
+ movl -4(%ebp),%edx
+ movl %edx,8(%esi)
+
+ popl %esi
+ leave
+ ret
+
diff --git a/arch/i386/math-emu/poly.h b/arch/i386/math-emu/poly.h
new file mode 100644
index 0000000..4db7981
--- /dev/null
+++ b/arch/i386/math-emu/poly.h
@@ -0,0 +1,121 @@
+/*---------------------------------------------------------------------------+
+ | poly.h |
+ | |
+ | Header file for the FPU-emu poly*.c source files. |
+ | |
+ | Copyright (C) 1994,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@melbpc.org.au |
+ | |
+ | Declarations and definitions for functions operating on Xsig (12-byte |
+ | extended-significand) quantities. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _POLY_H
+#define _POLY_H
+
+/* This 12-byte structure is used to improve the accuracy of computation
+ of transcendental functions.
+ Intended to be used to get results better than 8-byte computation
+ allows. 9-byte would probably be sufficient.
+ */
+typedef struct {
+ unsigned long lsw;
+ unsigned long midw;
+ unsigned long msw;
+} Xsig;
+
+asmlinkage void mul64(unsigned long long const *a, unsigned long long const *b,
+ unsigned long long *result);
+asmlinkage void polynomial_Xsig(Xsig *, const unsigned long long *x,
+ const unsigned long long terms[], const int n);
+
+asmlinkage void mul32_Xsig(Xsig *, const unsigned long mult);
+asmlinkage void mul64_Xsig(Xsig *, const unsigned long long *mult);
+asmlinkage void mul_Xsig_Xsig(Xsig *dest, const Xsig *mult);
+
+asmlinkage void shr_Xsig(Xsig *, const int n);
+asmlinkage int round_Xsig(Xsig *);
+asmlinkage int norm_Xsig(Xsig *);
+asmlinkage void div_Xsig(Xsig *x1, const Xsig *x2, const Xsig *dest);
+
+/* Macro to extract the most significant 32 bits from a long long */
+#define LL_MSW(x) (((unsigned long *)&x)[1])
+
+/* Macro to initialize an Xsig struct */
+#define MK_XSIG(a,b,c) { c, b, a }
+
+/* Macro to access the 8 ms bytes of an Xsig as a long long */
+#define XSIG_LL(x) (*(unsigned long long *)&x.midw)
+
+
+/*
+ Need to run gcc with optimizations on to get these to
+ actually be in-line.
+ */
+
+/* Multiply two fixed-point 32 bit numbers, producing a 32 bit result.
+ The answer is the ms word of the product. */
+/* Some versions of gcc make it difficult to stop eax from being clobbered.
+ Merely specifying that it is used doesn't work...
+ */
+static inline unsigned long mul_32_32(const unsigned long arg1,
+ const unsigned long arg2)
+{
+ int retval;
+ asm volatile ("mull %2; movl %%edx,%%eax" \
+ :"=a" (retval) \
+ :"0" (arg1), "g" (arg2) \
+ :"dx");
+ return retval;
+}
+
+
+/* Add the 12 byte Xsig x2 to Xsig dest, with no checks for overflow. */
+static inline void add_Xsig_Xsig(Xsig *dest, const Xsig *x2)
+{
+ asm volatile ("movl %1,%%edi; movl %2,%%esi;\n"
+ "movl (%%esi),%%eax; addl %%eax,(%%edi);\n"
+ "movl 4(%%esi),%%eax; adcl %%eax,4(%%edi);\n"
+ "movl 8(%%esi),%%eax; adcl %%eax,8(%%edi);\n"
+ :"=g" (*dest):"g" (dest), "g" (x2)
+ :"ax","si","di");
+}
+
+
+/* Add the 12 byte Xsig x2 to Xsig dest, adjust exp if overflow occurs. */
+/* Note: the constraints in the asm statement didn't always work properly
+ with gcc 2.5.8. Changing from using edi to using ecx got around the
+ problem, but keep fingers crossed! */
+static inline void add_two_Xsig(Xsig *dest, const Xsig *x2, long int *exp)
+{
+ asm volatile ("movl %2,%%ecx; movl %3,%%esi;\n"
+ "movl (%%esi),%%eax; addl %%eax,(%%ecx);\n"
+ "movl 4(%%esi),%%eax; adcl %%eax,4(%%ecx);\n"
+ "movl 8(%%esi),%%eax; adcl %%eax,8(%%ecx);\n"
+ "jnc 0f;\n"
+ "rcrl 8(%%ecx); rcrl 4(%%ecx); rcrl (%%ecx)\n"
+ "movl %4,%%ecx; incl (%%ecx)\n"
+ "movl $1,%%eax; jmp 1f;\n"
+ "0: xorl %%eax,%%eax;\n"
+ "1:\n"
+ :"=g" (*exp), "=g" (*dest)
+ :"g" (dest), "g" (x2), "g" (exp)
+ :"cx","si","ax");
+}
+
+
+/* Negate (subtract from 1.0) the 12 byte Xsig */
+/* This is faster in a loop on my 386 than using the "neg" instruction. */
+static inline void negate_Xsig(Xsig *x)
+{
+ asm volatile("movl %1,%%esi;\n"
+ "xorl %%ecx,%%ecx;\n"
+ "movl %%ecx,%%eax; subl (%%esi),%%eax; movl %%eax,(%%esi);\n"
+ "movl %%ecx,%%eax; sbbl 4(%%esi),%%eax; movl %%eax,4(%%esi);\n"
+ "movl %%ecx,%%eax; sbbl 8(%%esi),%%eax; movl %%eax,8(%%esi);\n"
+ :"=g" (*x):"g" (x):"si","ax","cx");
+}
+
+#endif /* _POLY_H */
diff --git a/arch/i386/math-emu/poly_2xm1.c b/arch/i386/math-emu/poly_2xm1.c
new file mode 100644
index 0000000..9766ad5
--- /dev/null
+++ b/arch/i386/math-emu/poly_2xm1.c
@@ -0,0 +1,156 @@
+/*---------------------------------------------------------------------------+
+ | poly_2xm1.c |
+ | |
+ | Function to compute 2^x-1 by a polynomial approximation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "control_w.h"
+#include "poly.h"
+
+
+#define HIPOWER 11
+static const unsigned long long lterms[HIPOWER] =
+{
+ 0x0000000000000000LL, /* This term done separately as 12 bytes */
+ 0xf5fdeffc162c7543LL,
+ 0x1c6b08d704a0bfa6LL,
+ 0x0276556df749cc21LL,
+ 0x002bb0ffcf14f6b8LL,
+ 0x0002861225ef751cLL,
+ 0x00001ffcbfcd5422LL,
+ 0x00000162c005d5f1LL,
+ 0x0000000da96ccb1bLL,
+ 0x0000000078d1b897LL,
+ 0x000000000422b029LL
+};
+
+static const Xsig hiterm = MK_XSIG(0xb17217f7, 0xd1cf79ab, 0xc8a39194);
+
+/* Four slices: 0.0 : 0.25 : 0.50 : 0.75 : 1.0,
+ These numbers are 2^(1/4), 2^(1/2), and 2^(3/4)
+ */
+static const Xsig shiftterm0 = MK_XSIG(0, 0, 0);
+static const Xsig shiftterm1 = MK_XSIG(0x9837f051, 0x8db8a96f, 0x46ad2318);
+static const Xsig shiftterm2 = MK_XSIG(0xb504f333, 0xf9de6484, 0x597d89b3);
+static const Xsig shiftterm3 = MK_XSIG(0xd744fcca, 0xd69d6af4, 0x39a68bb9);
+
+static const Xsig *shiftterm[] = { &shiftterm0, &shiftterm1,
+ &shiftterm2, &shiftterm3 };
+
+
+/*--- poly_2xm1() -----------------------------------------------------------+
+ | Requires st(0) which is TAG_Valid and < 1. |
+ +---------------------------------------------------------------------------*/
+int poly_2xm1(u_char sign, FPU_REG *arg, FPU_REG *result)
+{
+ long int exponent, shift;
+ unsigned long long Xll;
+ Xsig accumulator, Denom, argSignif;
+ u_char tag;
+
+ exponent = exponent16(arg);
+
+#ifdef PARANOID
+ if ( exponent >= 0 ) /* Don't want a |number| >= 1.0 */
+ {
+ /* Number negative, too large, or not Valid. */
+ EXCEPTION(EX_INTERNAL|0x127);
+ return 1;
+ }
+#endif /* PARANOID */
+
+ argSignif.lsw = 0;
+ XSIG_LL(argSignif) = Xll = significand(arg);
+
+ if ( exponent == -1 )
+ {
+ shift = (argSignif.msw & 0x40000000) ? 3 : 2;
+ /* subtract 0.5 or 0.75 */
+ exponent -= 2;
+ XSIG_LL(argSignif) <<= 2;
+ Xll <<= 2;
+ }
+ else if ( exponent == -2 )
+ {
+ shift = 1;
+ /* subtract 0.25 */
+ exponent--;
+ XSIG_LL(argSignif) <<= 1;
+ Xll <<= 1;
+ }
+ else
+ shift = 0;
+
+ if ( exponent < -2 )
+ {
+ /* Shift the argument right by the required places. */
+ if ( FPU_shrx(&Xll, -2-exponent) >= 0x80000000U )
+ Xll++; /* round up */
+ }
+
+ accumulator.lsw = accumulator.midw = accumulator.msw = 0;
+ polynomial_Xsig(&accumulator, &Xll, lterms, HIPOWER-1);
+ mul_Xsig_Xsig(&accumulator, &argSignif);
+ shr_Xsig(&accumulator, 3);
+
+ mul_Xsig_Xsig(&argSignif, &hiterm); /* The leading term */
+ add_two_Xsig(&accumulator, &argSignif, &exponent);
+
+ if ( shift )
+ {
+ /* The argument is large, use the identity:
+ f(x+a) = f(a) * (f(x) + 1) - 1;
+ */
+ shr_Xsig(&accumulator, - exponent);
+ accumulator.msw |= 0x80000000; /* add 1.0 */
+ mul_Xsig_Xsig(&accumulator, shiftterm[shift]);
+ accumulator.msw &= 0x3fffffff; /* subtract 1.0 */
+ exponent = 1;
+ }
+
+ if ( sign != SIGN_POS )
+ {
+ /* The argument is negative, use the identity:
+ f(-x) = -f(x) / (1 + f(x))
+ */
+ Denom.lsw = accumulator.lsw;
+ XSIG_LL(Denom) = XSIG_LL(accumulator);
+ if ( exponent < 0 )
+ shr_Xsig(&Denom, - exponent);
+ else if ( exponent > 0 )
+ {
+ /* exponent must be 1 here */
+ XSIG_LL(Denom) <<= 1;
+ if ( Denom.lsw & 0x80000000 )
+ XSIG_LL(Denom) |= 1;
+ (Denom.lsw) <<= 1;
+ }
+ Denom.msw |= 0x80000000; /* add 1.0 */
+ div_Xsig(&accumulator, &Denom, &accumulator);
+ }
+
+ /* Convert to 64 bit signed-compatible */
+ exponent += round_Xsig(&accumulator);
+
+ result = &st(0);
+ significand(result) = XSIG_LL(accumulator);
+ setexponent16(result, exponent);
+
+ tag = FPU_round(result, 1, 0, FULL_PRECISION, sign);
+
+ setsign(result, sign);
+ FPU_settag0(tag);
+
+ return 0;
+
+}
diff --git a/arch/i386/math-emu/poly_atan.c b/arch/i386/math-emu/poly_atan.c
new file mode 100644
index 0000000..82f7029
--- /dev/null
+++ b/arch/i386/math-emu/poly_atan.c
@@ -0,0 +1,229 @@
+/*---------------------------------------------------------------------------+
+ | poly_atan.c |
+ | |
+ | Compute the arctan of a FPU_REG, using a polynomial approximation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "status_w.h"
+#include "control_w.h"
+#include "poly.h"
+
+
+#define HIPOWERon 6 /* odd poly, negative terms */
+static const unsigned long long oddnegterms[HIPOWERon] =
+{
+ 0x0000000000000000LL, /* Dummy (not for - 1.0) */
+ 0x015328437f756467LL,
+ 0x0005dda27b73dec6LL,
+ 0x0000226bf2bfb91aLL,
+ 0x000000ccc439c5f7LL,
+ 0x0000000355438407LL
+} ;
+
+#define HIPOWERop 6 /* odd poly, positive terms */
+static const unsigned long long oddplterms[HIPOWERop] =
+{
+/* 0xaaaaaaaaaaaaaaabLL, transferred to fixedpterm[] */
+ 0x0db55a71875c9ac2LL,
+ 0x0029fce2d67880b0LL,
+ 0x0000dfd3908b4596LL,
+ 0x00000550fd61dab4LL,
+ 0x0000001c9422b3f9LL,
+ 0x000000003e3301e1LL
+};
+
+static const unsigned long long denomterm = 0xebd9b842c5c53a0eLL;
+
+static const Xsig fixedpterm = MK_XSIG(0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa);
+
+static const Xsig pi_signif = MK_XSIG(0xc90fdaa2, 0x2168c234, 0xc4c6628b);
+
+
+/*--- poly_atan() -----------------------------------------------------------+
+ | |
+ +---------------------------------------------------------------------------*/
+void poly_atan(FPU_REG *st0_ptr, u_char st0_tag,
+ FPU_REG *st1_ptr, u_char st1_tag)
+{
+ u_char transformed, inverted,
+ sign1, sign2;
+ int exponent;
+ long int dummy_exp;
+ Xsig accumulator, Numer, Denom, accumulatore, argSignif,
+ argSq, argSqSq;
+ u_char tag;
+
+ sign1 = getsign(st0_ptr);
+ sign2 = getsign(st1_ptr);
+ if ( st0_tag == TAG_Valid )
+ {
+ exponent = exponent(st0_ptr);
+ }
+ else
+ {
+ /* This gives non-compatible stack contents... */
+ FPU_to_exp16(st0_ptr, st0_ptr);
+ exponent = exponent16(st0_ptr);
+ }
+ if ( st1_tag == TAG_Valid )
+ {
+ exponent -= exponent(st1_ptr);
+ }
+ else
+ {
+ /* This gives non-compatible stack contents... */
+ FPU_to_exp16(st1_ptr, st1_ptr);
+ exponent -= exponent16(st1_ptr);
+ }
+
+ if ( (exponent < 0) || ((exponent == 0) &&
+ ((st0_ptr->sigh < st1_ptr->sigh) ||
+ ((st0_ptr->sigh == st1_ptr->sigh) &&
+ (st0_ptr->sigl < st1_ptr->sigl))) ) )
+ {
+ inverted = 1;
+ Numer.lsw = Denom.lsw = 0;
+ XSIG_LL(Numer) = significand(st0_ptr);
+ XSIG_LL(Denom) = significand(st1_ptr);
+ }
+ else
+ {
+ inverted = 0;
+ exponent = -exponent;
+ Numer.lsw = Denom.lsw = 0;
+ XSIG_LL(Numer) = significand(st1_ptr);
+ XSIG_LL(Denom) = significand(st0_ptr);
+ }
+ div_Xsig(&Numer, &Denom, &argSignif);
+ exponent += norm_Xsig(&argSignif);
+
+ if ( (exponent >= -1)
+ || ((exponent == -2) && (argSignif.msw > 0xd413ccd0)) )
+ {
+ /* The argument is greater than sqrt(2)-1 (=0.414213562...) */
+ /* Convert the argument by an identity for atan */
+ transformed = 1;
+
+ if ( exponent >= 0 )
+ {
+#ifdef PARANOID
+ if ( !( (exponent == 0) &&
+ (argSignif.lsw == 0) && (argSignif.midw == 0) &&
+ (argSignif.msw == 0x80000000) ) )
+ {
+ EXCEPTION(EX_INTERNAL|0x104); /* There must be a logic error */
+ return;
+ }
+#endif /* PARANOID */
+ argSignif.msw = 0; /* Make the transformed arg -> 0.0 */
+ }
+ else
+ {
+ Numer.lsw = Denom.lsw = argSignif.lsw;
+ XSIG_LL(Numer) = XSIG_LL(Denom) = XSIG_LL(argSignif);
+
+ if ( exponent < -1 )
+ shr_Xsig(&Numer, -1-exponent);
+ negate_Xsig(&Numer);
+
+ shr_Xsig(&Denom, -exponent);
+ Denom.msw |= 0x80000000;
+
+ div_Xsig(&Numer, &Denom, &argSignif);
+
+ exponent = -1 + norm_Xsig(&argSignif);
+ }
+ }
+ else
+ {
+ transformed = 0;
+ }
+
+ argSq.lsw = argSignif.lsw; argSq.midw = argSignif.midw;
+ argSq.msw = argSignif.msw;
+ mul_Xsig_Xsig(&argSq, &argSq);
+
+ argSqSq.lsw = argSq.lsw; argSqSq.midw = argSq.midw; argSqSq.msw = argSq.msw;
+ mul_Xsig_Xsig(&argSqSq, &argSqSq);
+
+ accumulatore.lsw = argSq.lsw;
+ XSIG_LL(accumulatore) = XSIG_LL(argSq);
+
+ shr_Xsig(&argSq, 2*(-1-exponent-1));
+ shr_Xsig(&argSqSq, 4*(-1-exponent-1));
+
+ /* Now have argSq etc with binary point at the left
+ .1xxxxxxxx */
+
+ /* Do the basic fixed point polynomial evaluation */
+ accumulator.msw = accumulator.midw = accumulator.lsw = 0;
+ polynomial_Xsig(&accumulator, &XSIG_LL(argSqSq),
+ oddplterms, HIPOWERop-1);
+ mul64_Xsig(&accumulator, &XSIG_LL(argSq));
+ negate_Xsig(&accumulator);
+ polynomial_Xsig(&accumulator, &XSIG_LL(argSqSq), oddnegterms, HIPOWERon-1);
+ negate_Xsig(&accumulator);
+ add_two_Xsig(&accumulator, &fixedpterm, &dummy_exp);
+
+ mul64_Xsig(&accumulatore, &denomterm);
+ shr_Xsig(&accumulatore, 1 + 2*(-1-exponent));
+ accumulatore.msw |= 0x80000000;
+
+ div_Xsig(&accumulator, &accumulatore, &accumulator);
+
+ mul_Xsig_Xsig(&accumulator, &argSignif);
+ mul_Xsig_Xsig(&accumulator, &argSq);
+
+ shr_Xsig(&accumulator, 3);
+ negate_Xsig(&accumulator);
+ add_Xsig_Xsig(&accumulator, &argSignif);
+
+ if ( transformed )
+ {
+ /* compute pi/4 - accumulator */
+ shr_Xsig(&accumulator, -1-exponent);
+ negate_Xsig(&accumulator);
+ add_Xsig_Xsig(&accumulator, &pi_signif);
+ exponent = -1;
+ }
+
+ if ( inverted )
+ {
+ /* compute pi/2 - accumulator */
+ shr_Xsig(&accumulator, -exponent);
+ negate_Xsig(&accumulator);
+ add_Xsig_Xsig(&accumulator, &pi_signif);
+ exponent = 0;
+ }
+
+ if ( sign1 )
+ {
+ /* compute pi - accumulator */
+ shr_Xsig(&accumulator, 1 - exponent);
+ negate_Xsig(&accumulator);
+ add_Xsig_Xsig(&accumulator, &pi_signif);
+ exponent = 1;
+ }
+
+ exponent += round_Xsig(&accumulator);
+
+ significand(st1_ptr) = XSIG_LL(accumulator);
+ setexponent16(st1_ptr, exponent);
+
+ tag = FPU_round(st1_ptr, 1, 0, FULL_PRECISION, sign2);
+ FPU_settagi(1, tag);
+
+ set_precision_flag_up(); /* We do not really know if up or down,
+ use this as the default. */
+
+}
diff --git a/arch/i386/math-emu/poly_l2.c b/arch/i386/math-emu/poly_l2.c
new file mode 100644
index 0000000..dd00e1d
--- /dev/null
+++ b/arch/i386/math-emu/poly_l2.c
@@ -0,0 +1,272 @@
+/*---------------------------------------------------------------------------+
+ | poly_l2.c |
+ | |
+ | Compute the base 2 log of a FPU_REG, using a polynomial approximation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "control_w.h"
+#include "poly.h"
+
+
+static void log2_kernel(FPU_REG const *arg, u_char argsign,
+ Xsig *accum_result, long int *expon);
+
+
+/*--- poly_l2() -------------------------------------------------------------+
+ | Base 2 logarithm by a polynomial approximation. |
+ +---------------------------------------------------------------------------*/
+void poly_l2(FPU_REG *st0_ptr, FPU_REG *st1_ptr, u_char st1_sign)
+{
+ long int exponent, expon, expon_expon;
+ Xsig accumulator, expon_accum, yaccum;
+ u_char sign, argsign;
+ FPU_REG x;
+ int tag;
+
+ exponent = exponent16(st0_ptr);
+
+ /* From st0_ptr, make a number > sqrt(2)/2 and < sqrt(2) */
+ if ( st0_ptr->sigh > (unsigned)0xb504f334 )
+ {
+ /* Treat as sqrt(2)/2 < st0_ptr < 1 */
+ significand(&x) = - significand(st0_ptr);
+ setexponent16(&x, -1);
+ exponent++;
+ argsign = SIGN_NEG;
+ }
+ else
+ {
+ /* Treat as 1 <= st0_ptr < sqrt(2) */
+ x.sigh = st0_ptr->sigh - 0x80000000;
+ x.sigl = st0_ptr->sigl;
+ setexponent16(&x, 0);
+ argsign = SIGN_POS;
+ }
+ tag = FPU_normalize_nuo(&x);
+
+ if ( tag == TAG_Zero )
+ {
+ expon = 0;
+ accumulator.msw = accumulator.midw = accumulator.lsw = 0;
+ }
+ else
+ {
+ log2_kernel(&x, argsign, &accumulator, &expon);
+ }
+
+ if ( exponent < 0 )
+ {
+ sign = SIGN_NEG;
+ exponent = -exponent;
+ }
+ else
+ sign = SIGN_POS;
+ expon_accum.msw = exponent; expon_accum.midw = expon_accum.lsw = 0;
+ if ( exponent )
+ {
+ expon_expon = 31 + norm_Xsig(&expon_accum);
+ shr_Xsig(&accumulator, expon_expon - expon);
+
+ if ( sign ^ argsign )
+ negate_Xsig(&accumulator);
+ add_Xsig_Xsig(&accumulator, &expon_accum);
+ }
+ else
+ {
+ expon_expon = expon;
+ sign = argsign;
+ }
+
+ yaccum.lsw = 0; XSIG_LL(yaccum) = significand(st1_ptr);
+ mul_Xsig_Xsig(&accumulator, &yaccum);
+
+ expon_expon += round_Xsig(&accumulator);
+
+ if ( accumulator.msw == 0 )
+ {
+ FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
+ return;
+ }
+
+ significand(st1_ptr) = XSIG_LL(accumulator);
+ setexponent16(st1_ptr, expon_expon + exponent16(st1_ptr) + 1);
+
+ tag = FPU_round(st1_ptr, 1, 0, FULL_PRECISION, sign ^ st1_sign);
+ FPU_settagi(1, tag);
+
+ set_precision_flag_up(); /* 80486 appears to always do this */
+
+ return;
+
+}
+
+
+/*--- poly_l2p1() -----------------------------------------------------------+
+ | Base 2 logarithm by a polynomial approximation. |
+ | log2(x+1) |
+ +---------------------------------------------------------------------------*/
+int poly_l2p1(u_char sign0, u_char sign1,
+ FPU_REG *st0_ptr, FPU_REG *st1_ptr, FPU_REG *dest)
+{
+ u_char tag;
+ long int exponent;
+ Xsig accumulator, yaccum;
+
+ if ( exponent16(st0_ptr) < 0 )
+ {
+ log2_kernel(st0_ptr, sign0, &accumulator, &exponent);
+
+ yaccum.lsw = 0;
+ XSIG_LL(yaccum) = significand(st1_ptr);
+ mul_Xsig_Xsig(&accumulator, &yaccum);
+
+ exponent += round_Xsig(&accumulator);
+
+ exponent += exponent16(st1_ptr) + 1;
+ if ( exponent < EXP_WAY_UNDER ) exponent = EXP_WAY_UNDER;
+
+ significand(dest) = XSIG_LL(accumulator);
+ setexponent16(dest, exponent);
+
+ tag = FPU_round(dest, 1, 0, FULL_PRECISION, sign0 ^ sign1);
+ FPU_settagi(1, tag);
+
+ if ( tag == TAG_Valid )
+ set_precision_flag_up(); /* 80486 appears to always do this */
+ }
+ else
+ {
+ /* The magnitude of st0_ptr is far too large. */
+
+ if ( sign0 != SIGN_POS )
+ {
+ /* Trying to get the log of a negative number. */
+#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
+ changesign(st1_ptr);
+#else
+ if ( arith_invalid(1) < 0 )
+ return 1;
+#endif /* PECULIAR_486 */
+ }
+
+ /* 80486 appears to do this */
+ if ( sign0 == SIGN_NEG )
+ set_precision_flag_down();
+ else
+ set_precision_flag_up();
+ }
+
+ if ( exponent(dest) <= EXP_UNDER )
+ EXCEPTION(EX_Underflow);
+
+ return 0;
+
+}
+
+
+
+
+#undef HIPOWER
+#define HIPOWER 10
+static const unsigned long long logterms[HIPOWER] =
+{
+ 0x2a8eca5705fc2ef0LL,
+ 0xf6384ee1d01febceLL,
+ 0x093bb62877cdf642LL,
+ 0x006985d8a9ec439bLL,
+ 0x0005212c4f55a9c8LL,
+ 0x00004326a16927f0LL,
+ 0x0000038d1d80a0e7LL,
+ 0x0000003141cc80c6LL,
+ 0x00000002b1668c9fLL,
+ 0x000000002c7a46aaLL
+};
+
+static const unsigned long leadterm = 0xb8000000;
+
+
+/*--- log2_kernel() ---------------------------------------------------------+
+ | Base 2 logarithm by a polynomial approximation. |
+ | log2(x+1) |
+ +---------------------------------------------------------------------------*/
+static void log2_kernel(FPU_REG const *arg, u_char argsign, Xsig *accum_result,
+ long int *expon)
+{
+ long int exponent, adj;
+ unsigned long long Xsq;
+ Xsig accumulator, Numer, Denom, argSignif, arg_signif;
+
+ exponent = exponent16(arg);
+ Numer.lsw = Denom.lsw = 0;
+ XSIG_LL(Numer) = XSIG_LL(Denom) = significand(arg);
+ if ( argsign == SIGN_POS )
+ {
+ shr_Xsig(&Denom, 2 - (1 + exponent));
+ Denom.msw |= 0x80000000;
+ div_Xsig(&Numer, &Denom, &argSignif);
+ }
+ else
+ {
+ shr_Xsig(&Denom, 1 - (1 + exponent));
+ negate_Xsig(&Denom);
+ if ( Denom.msw & 0x80000000 )
+ {
+ div_Xsig(&Numer, &Denom, &argSignif);
+ exponent ++;
+ }
+ else
+ {
+ /* Denom must be 1.0 */
+ argSignif.lsw = Numer.lsw; argSignif.midw = Numer.midw;
+ argSignif.msw = Numer.msw;
+ }
+ }
+
+#ifndef PECULIAR_486
+ /* Should check here that |local_arg| is within the valid range */
+ if ( exponent >= -2 )
+ {
+ if ( (exponent > -2) ||
+ (argSignif.msw > (unsigned)0xafb0ccc0) )
+ {
+ /* The argument is too large */
+ }
+ }
+#endif /* PECULIAR_486 */
+
+ arg_signif.lsw = argSignif.lsw; XSIG_LL(arg_signif) = XSIG_LL(argSignif);
+ adj = norm_Xsig(&argSignif);
+ accumulator.lsw = argSignif.lsw; XSIG_LL(accumulator) = XSIG_LL(argSignif);
+ mul_Xsig_Xsig(&accumulator, &accumulator);
+ shr_Xsig(&accumulator, 2*(-1 - (1 + exponent + adj)));
+ Xsq = XSIG_LL(accumulator);
+ if ( accumulator.lsw & 0x80000000 )
+ Xsq++;
+
+ accumulator.msw = accumulator.midw = accumulator.lsw = 0;
+ /* Do the basic fixed point polynomial evaluation */
+ polynomial_Xsig(&accumulator, &Xsq, logterms, HIPOWER-1);
+
+ mul_Xsig_Xsig(&accumulator, &argSignif);
+ shr_Xsig(&accumulator, 6 - adj);
+
+ mul32_Xsig(&arg_signif, leadterm);
+ add_two_Xsig(&accumulator, &arg_signif, &exponent);
+
+ *expon = exponent + 1;
+ accum_result->lsw = accumulator.lsw;
+ accum_result->midw = accumulator.midw;
+ accum_result->msw = accumulator.msw;
+
+}
diff --git a/arch/i386/math-emu/poly_sin.c b/arch/i386/math-emu/poly_sin.c
new file mode 100644
index 0000000..a36313f
--- /dev/null
+++ b/arch/i386/math-emu/poly_sin.c
@@ -0,0 +1,397 @@
+/*---------------------------------------------------------------------------+
+ | poly_sin.c |
+ | |
+ | Computation of an approximation of the sin function and the cosine |
+ | function by a polynomial. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@melbpc.org.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "control_w.h"
+#include "poly.h"
+
+
+#define N_COEFF_P 4
+#define N_COEFF_N 4
+
+static const unsigned long long pos_terms_l[N_COEFF_P] =
+{
+ 0xaaaaaaaaaaaaaaabLL,
+ 0x00d00d00d00cf906LL,
+ 0x000006b99159a8bbLL,
+ 0x000000000d7392e6LL
+};
+
+static const unsigned long long neg_terms_l[N_COEFF_N] =
+{
+ 0x2222222222222167LL,
+ 0x0002e3bc74aab624LL,
+ 0x0000000b09229062LL,
+ 0x00000000000c7973LL
+};
+
+
+
+#define N_COEFF_PH 4
+#define N_COEFF_NH 4
+static const unsigned long long pos_terms_h[N_COEFF_PH] =
+{
+ 0x0000000000000000LL,
+ 0x05b05b05b05b0406LL,
+ 0x000049f93edd91a9LL,
+ 0x00000000c9c9ed62LL
+};
+
+static const unsigned long long neg_terms_h[N_COEFF_NH] =
+{
+ 0xaaaaaaaaaaaaaa98LL,
+ 0x001a01a01a019064LL,
+ 0x0000008f76c68a77LL,
+ 0x0000000000d58f5eLL
+};
+
+
+/*--- poly_sine() -----------------------------------------------------------+
+ | |
+ +---------------------------------------------------------------------------*/
+void poly_sine(FPU_REG *st0_ptr)
+{
+ int exponent, echange;
+ Xsig accumulator, argSqrd, argTo4;
+ unsigned long fix_up, adj;
+ unsigned long long fixed_arg;
+ FPU_REG result;
+
+ exponent = exponent(st0_ptr);
+
+ accumulator.lsw = accumulator.midw = accumulator.msw = 0;
+
+ /* Split into two ranges, for arguments below and above 1.0 */
+ /* The boundary between upper and lower is approx 0.88309101259 */
+ if ( (exponent < -1) || ((exponent == -1) && (st0_ptr->sigh <= 0xe21240aa)) )
+ {
+ /* The argument is <= 0.88309101259 */
+
+ argSqrd.msw = st0_ptr->sigh; argSqrd.midw = st0_ptr->sigl; argSqrd.lsw = 0;
+ mul64_Xsig(&argSqrd, &significand(st0_ptr));
+ shr_Xsig(&argSqrd, 2*(-1-exponent));
+ argTo4.msw = argSqrd.msw; argTo4.midw = argSqrd.midw;
+ argTo4.lsw = argSqrd.lsw;
+ mul_Xsig_Xsig(&argTo4, &argTo4);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_l,
+ N_COEFF_N-1);
+ mul_Xsig_Xsig(&accumulator, &argSqrd);
+ negate_Xsig(&accumulator);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_l,
+ N_COEFF_P-1);
+
+ shr_Xsig(&accumulator, 2); /* Divide by four */
+ accumulator.msw |= 0x80000000; /* Add 1.0 */
+
+ mul64_Xsig(&accumulator, &significand(st0_ptr));
+ mul64_Xsig(&accumulator, &significand(st0_ptr));
+ mul64_Xsig(&accumulator, &significand(st0_ptr));
+
+ /* Divide by four, FPU_REG compatible, etc */
+ exponent = 3*exponent;
+
+ /* The minimum exponent difference is 3 */
+ shr_Xsig(&accumulator, exponent(st0_ptr) - exponent);
+
+ negate_Xsig(&accumulator);
+ XSIG_LL(accumulator) += significand(st0_ptr);
+
+ echange = round_Xsig(&accumulator);
+
+ setexponentpos(&result, exponent(st0_ptr) + echange);
+ }
+ else
+ {
+ /* The argument is > 0.88309101259 */
+ /* We use sin(st(0)) = cos(pi/2-st(0)) */
+
+ fixed_arg = significand(st0_ptr);
+
+ if ( exponent == 0 )
+ {
+ /* The argument is >= 1.0 */
+
+ /* Put the binary point at the left. */
+ fixed_arg <<= 1;
+ }
+ /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
+ fixed_arg = 0x921fb54442d18469LL - fixed_arg;
+ /* There is a special case which arises due to rounding, to fix here. */
+ if ( fixed_arg == 0xffffffffffffffffLL )
+ fixed_arg = 0;
+
+ XSIG_LL(argSqrd) = fixed_arg; argSqrd.lsw = 0;
+ mul64_Xsig(&argSqrd, &fixed_arg);
+
+ XSIG_LL(argTo4) = XSIG_LL(argSqrd); argTo4.lsw = argSqrd.lsw;
+ mul_Xsig_Xsig(&argTo4, &argTo4);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_h,
+ N_COEFF_NH-1);
+ mul_Xsig_Xsig(&accumulator, &argSqrd);
+ negate_Xsig(&accumulator);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_h,
+ N_COEFF_PH-1);
+ negate_Xsig(&accumulator);
+
+ mul64_Xsig(&accumulator, &fixed_arg);
+ mul64_Xsig(&accumulator, &fixed_arg);
+
+ shr_Xsig(&accumulator, 3);
+ negate_Xsig(&accumulator);
+
+ add_Xsig_Xsig(&accumulator, &argSqrd);
+
+ shr_Xsig(&accumulator, 1);
+
+ accumulator.lsw |= 1; /* A zero accumulator here would cause problems */
+ negate_Xsig(&accumulator);
+
+ /* The basic computation is complete. Now fix the answer to
+ compensate for the error due to the approximation used for
+ pi/2
+ */
+
+ /* This has an exponent of -65 */
+ fix_up = 0x898cc517;
+ /* The fix-up needs to be improved for larger args */
+ if ( argSqrd.msw & 0xffc00000 )
+ {
+ /* Get about 32 bit precision in these: */
+ fix_up -= mul_32_32(0x898cc517, argSqrd.msw) / 6;
+ }
+ fix_up = mul_32_32(fix_up, LL_MSW(fixed_arg));
+
+ adj = accumulator.lsw; /* temp save */
+ accumulator.lsw -= fix_up;
+ if ( accumulator.lsw > adj )
+ XSIG_LL(accumulator) --;
+
+ echange = round_Xsig(&accumulator);
+
+ setexponentpos(&result, echange - 1);
+ }
+
+ significand(&result) = XSIG_LL(accumulator);
+ setsign(&result, getsign(st0_ptr));
+ FPU_copy_to_reg0(&result, TAG_Valid);
+
+#ifdef PARANOID
+ if ( (exponent(&result) >= 0)
+ && (significand(&result) > 0x8000000000000000LL) )
+ {
+ EXCEPTION(EX_INTERNAL|0x150);
+ }
+#endif /* PARANOID */
+
+}
+
+
+
+/*--- poly_cos() ------------------------------------------------------------+
+ | |
+ +---------------------------------------------------------------------------*/
+void poly_cos(FPU_REG *st0_ptr)
+{
+ FPU_REG result;
+ long int exponent, exp2, echange;
+ Xsig accumulator, argSqrd, fix_up, argTo4;
+ unsigned long long fixed_arg;
+
+#ifdef PARANOID
+ if ( (exponent(st0_ptr) > 0)
+ || ((exponent(st0_ptr) == 0)
+ && (significand(st0_ptr) > 0xc90fdaa22168c234LL)) )
+ {
+ EXCEPTION(EX_Invalid);
+ FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
+ return;
+ }
+#endif /* PARANOID */
+
+ exponent = exponent(st0_ptr);
+
+ accumulator.lsw = accumulator.midw = accumulator.msw = 0;
+
+ if ( (exponent < -1) || ((exponent == -1) && (st0_ptr->sigh <= 0xb00d6f54)) )
+ {
+ /* arg is < 0.687705 */
+
+ argSqrd.msw = st0_ptr->sigh; argSqrd.midw = st0_ptr->sigl;
+ argSqrd.lsw = 0;
+ mul64_Xsig(&argSqrd, &significand(st0_ptr));
+
+ if ( exponent < -1 )
+ {
+ /* shift the argument right by the required places */
+ shr_Xsig(&argSqrd, 2*(-1-exponent));
+ }
+
+ argTo4.msw = argSqrd.msw; argTo4.midw = argSqrd.midw;
+ argTo4.lsw = argSqrd.lsw;
+ mul_Xsig_Xsig(&argTo4, &argTo4);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_h,
+ N_COEFF_NH-1);
+ mul_Xsig_Xsig(&accumulator, &argSqrd);
+ negate_Xsig(&accumulator);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_h,
+ N_COEFF_PH-1);
+ negate_Xsig(&accumulator);
+
+ mul64_Xsig(&accumulator, &significand(st0_ptr));
+ mul64_Xsig(&accumulator, &significand(st0_ptr));
+ shr_Xsig(&accumulator, -2*(1+exponent));
+
+ shr_Xsig(&accumulator, 3);
+ negate_Xsig(&accumulator);
+
+ add_Xsig_Xsig(&accumulator, &argSqrd);
+
+ shr_Xsig(&accumulator, 1);
+
+ /* It doesn't matter if accumulator is all zero here, the
+ following code will work ok */
+ negate_Xsig(&accumulator);
+
+ if ( accumulator.lsw & 0x80000000 )
+ XSIG_LL(accumulator) ++;
+ if ( accumulator.msw == 0 )
+ {
+ /* The result is 1.0 */
+ FPU_copy_to_reg0(&CONST_1, TAG_Valid);
+ return;
+ }
+ else
+ {
+ significand(&result) = XSIG_LL(accumulator);
+
+ /* will be a valid positive nr with expon = -1 */
+ setexponentpos(&result, -1);
+ }
+ }
+ else
+ {
+ fixed_arg = significand(st0_ptr);
+
+ if ( exponent == 0 )
+ {
+ /* The argument is >= 1.0 */
+
+ /* Put the binary point at the left. */
+ fixed_arg <<= 1;
+ }
+ /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
+ fixed_arg = 0x921fb54442d18469LL - fixed_arg;
+ /* There is a special case which arises due to rounding, to fix here. */
+ if ( fixed_arg == 0xffffffffffffffffLL )
+ fixed_arg = 0;
+
+ exponent = -1;
+ exp2 = -1;
+
+ /* A shift is needed here only for a narrow range of arguments,
+ i.e. for fixed_arg approx 2^-32, but we pick up more... */
+ if ( !(LL_MSW(fixed_arg) & 0xffff0000) )
+ {
+ fixed_arg <<= 16;
+ exponent -= 16;
+ exp2 -= 16;
+ }
+
+ XSIG_LL(argSqrd) = fixed_arg; argSqrd.lsw = 0;
+ mul64_Xsig(&argSqrd, &fixed_arg);
+
+ if ( exponent < -1 )
+ {
+ /* shift the argument right by the required places */
+ shr_Xsig(&argSqrd, 2*(-1-exponent));
+ }
+
+ argTo4.msw = argSqrd.msw; argTo4.midw = argSqrd.midw;
+ argTo4.lsw = argSqrd.lsw;
+ mul_Xsig_Xsig(&argTo4, &argTo4);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_l,
+ N_COEFF_N-1);
+ mul_Xsig_Xsig(&accumulator, &argSqrd);
+ negate_Xsig(&accumulator);
+
+ polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_l,
+ N_COEFF_P-1);
+
+ shr_Xsig(&accumulator, 2); /* Divide by four */
+ accumulator.msw |= 0x80000000; /* Add 1.0 */
+
+ mul64_Xsig(&accumulator, &fixed_arg);
+ mul64_Xsig(&accumulator, &fixed_arg);
+ mul64_Xsig(&accumulator, &fixed_arg);
+
+ /* Divide by four, FPU_REG compatible, etc */
+ exponent = 3*exponent;
+
+ /* The minimum exponent difference is 3 */
+ shr_Xsig(&accumulator, exp2 - exponent);
+
+ negate_Xsig(&accumulator);
+ XSIG_LL(accumulator) += fixed_arg;
+
+ /* The basic computation is complete. Now fix the answer to
+ compensate for the error due to the approximation used for
+ pi/2
+ */
+
+ /* This has an exponent of -65 */
+ XSIG_LL(fix_up) = 0x898cc51701b839a2ll;
+ fix_up.lsw = 0;
+
+ /* The fix-up needs to be improved for larger args */
+ if ( argSqrd.msw & 0xffc00000 )
+ {
+ /* Get about 32 bit precision in these: */
+ fix_up.msw -= mul_32_32(0x898cc517, argSqrd.msw) / 2;
+ fix_up.msw += mul_32_32(0x898cc517, argTo4.msw) / 24;
+ }
+
+ exp2 += norm_Xsig(&accumulator);
+ shr_Xsig(&accumulator, 1); /* Prevent overflow */
+ exp2++;
+ shr_Xsig(&fix_up, 65 + exp2);
+
+ add_Xsig_Xsig(&accumulator, &fix_up);
+
+ echange = round_Xsig(&accumulator);
+
+ setexponentpos(&result, exp2 + echange);
+ significand(&result) = XSIG_LL(accumulator);
+ }
+
+ FPU_copy_to_reg0(&result, TAG_Valid);
+
+#ifdef PARANOID
+ if ( (exponent(&result) >= 0)
+ && (significand(&result) > 0x8000000000000000LL) )
+ {
+ EXCEPTION(EX_INTERNAL|0x151);
+ }
+#endif /* PARANOID */
+
+}
diff --git a/arch/i386/math-emu/poly_tan.c b/arch/i386/math-emu/poly_tan.c
new file mode 100644
index 0000000..8df3e03
--- /dev/null
+++ b/arch/i386/math-emu/poly_tan.c
@@ -0,0 +1,222 @@
+/*---------------------------------------------------------------------------+
+ | poly_tan.c |
+ | |
+ | Compute the tan of a FPU_REG, using a polynomial approximation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1997,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@melbpc.org.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+#include "control_w.h"
+#include "poly.h"
+
+
+#define HiPOWERop 3 /* odd poly, positive terms */
+static const unsigned long long oddplterm[HiPOWERop] =
+{
+ 0x0000000000000000LL,
+ 0x0051a1cf08fca228LL,
+ 0x0000000071284ff7LL
+};
+
+#define HiPOWERon 2 /* odd poly, negative terms */
+static const unsigned long long oddnegterm[HiPOWERon] =
+{
+ 0x1291a9a184244e80LL,
+ 0x0000583245819c21LL
+};
+
+#define HiPOWERep 2 /* even poly, positive terms */
+static const unsigned long long evenplterm[HiPOWERep] =
+{
+ 0x0e848884b539e888LL,
+ 0x00003c7f18b887daLL
+};
+
+#define HiPOWERen 2 /* even poly, negative terms */
+static const unsigned long long evennegterm[HiPOWERen] =
+{
+ 0xf1f0200fd51569ccLL,
+ 0x003afb46105c4432LL
+};
+
+static const unsigned long long twothirds = 0xaaaaaaaaaaaaaaabLL;
+
+
+/*--- poly_tan() ------------------------------------------------------------+
+ | |
+ +---------------------------------------------------------------------------*/
+void poly_tan(FPU_REG *st0_ptr)
+{
+ long int exponent;
+ int invert;
+ Xsig argSq, argSqSq, accumulatoro, accumulatore, accum,
+ argSignif, fix_up;
+ unsigned long adj;
+
+ exponent = exponent(st0_ptr);
+
+#ifdef PARANOID
+ if ( signnegative(st0_ptr) ) /* Can't hack a number < 0.0 */
+ { arith_invalid(0); return; } /* Need a positive number */
+#endif /* PARANOID */
+
+ /* Split the problem into two domains, smaller and larger than pi/4 */
+ if ( (exponent == 0) || ((exponent == -1) && (st0_ptr->sigh > 0xc90fdaa2)) )
+ {
+ /* The argument is greater than (approx) pi/4 */
+ invert = 1;
+ accum.lsw = 0;
+ XSIG_LL(accum) = significand(st0_ptr);
+
+ if ( exponent == 0 )
+ {
+ /* The argument is >= 1.0 */
+ /* Put the binary point at the left. */
+ XSIG_LL(accum) <<= 1;
+ }
+ /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
+ XSIG_LL(accum) = 0x921fb54442d18469LL - XSIG_LL(accum);
+ /* This is a special case which arises due to rounding. */
+ if ( XSIG_LL(accum) == 0xffffffffffffffffLL )
+ {
+ FPU_settag0(TAG_Valid);
+ significand(st0_ptr) = 0x8a51e04daabda360LL;
+ setexponent16(st0_ptr, (0x41 + EXTENDED_Ebias) | SIGN_Negative);
+ return;
+ }
+
+ argSignif.lsw = accum.lsw;
+ XSIG_LL(argSignif) = XSIG_LL(accum);
+ exponent = -1 + norm_Xsig(&argSignif);
+ }
+ else
+ {
+ invert = 0;
+ argSignif.lsw = 0;
+ XSIG_LL(accum) = XSIG_LL(argSignif) = significand(st0_ptr);
+
+ if ( exponent < -1 )
+ {
+ /* shift the argument right by the required places */
+ if ( FPU_shrx(&XSIG_LL(accum), -1-exponent) >= 0x80000000U )
+ XSIG_LL(accum) ++; /* round up */
+ }
+ }
+
+ XSIG_LL(argSq) = XSIG_LL(accum); argSq.lsw = accum.lsw;
+ mul_Xsig_Xsig(&argSq, &argSq);
+ XSIG_LL(argSqSq) = XSIG_LL(argSq); argSqSq.lsw = argSq.lsw;
+ mul_Xsig_Xsig(&argSqSq, &argSqSq);
+
+ /* Compute the negative terms for the numerator polynomial */
+ accumulatoro.msw = accumulatoro.midw = accumulatoro.lsw = 0;
+ polynomial_Xsig(&accumulatoro, &XSIG_LL(argSqSq), oddnegterm, HiPOWERon-1);
+ mul_Xsig_Xsig(&accumulatoro, &argSq);
+ negate_Xsig(&accumulatoro);
+ /* Add the positive terms */
+ polynomial_Xsig(&accumulatoro, &XSIG_LL(argSqSq), oddplterm, HiPOWERop-1);
+
+
+ /* Compute the positive terms for the denominator polynomial */
+ accumulatore.msw = accumulatore.midw = accumulatore.lsw = 0;
+ polynomial_Xsig(&accumulatore, &XSIG_LL(argSqSq), evenplterm, HiPOWERep-1);
+ mul_Xsig_Xsig(&accumulatore, &argSq);
+ negate_Xsig(&accumulatore);
+ /* Add the negative terms */
+ polynomial_Xsig(&accumulatore, &XSIG_LL(argSqSq), evennegterm, HiPOWERen-1);
+ /* Multiply by arg^2 */
+ mul64_Xsig(&accumulatore, &XSIG_LL(argSignif));
+ mul64_Xsig(&accumulatore, &XSIG_LL(argSignif));
+ /* de-normalize and divide by 2 */
+ shr_Xsig(&accumulatore, -2*(1+exponent) + 1);
+ negate_Xsig(&accumulatore); /* This does 1 - accumulator */
+
+ /* Now find the ratio. */
+ if ( accumulatore.msw == 0 )
+ {
+ /* accumulatoro must contain 1.0 here, (actually, 0) but it
+ really doesn't matter what value we use because it will
+ have negligible effect in later calculations
+ */
+ XSIG_LL(accum) = 0x8000000000000000LL;
+ accum.lsw = 0;
+ }
+ else
+ {
+ div_Xsig(&accumulatoro, &accumulatore, &accum);
+ }
+
+ /* Multiply by 1/3 * arg^3 */
+ mul64_Xsig(&accum, &XSIG_LL(argSignif));
+ mul64_Xsig(&accum, &XSIG_LL(argSignif));
+ mul64_Xsig(&accum, &XSIG_LL(argSignif));
+ mul64_Xsig(&accum, &twothirds);
+ shr_Xsig(&accum, -2*(exponent+1));
+
+ /* tan(arg) = arg + accum */
+ add_two_Xsig(&accum, &argSignif, &exponent);
+
+ if ( invert )
+ {
+ /* We now have the value of tan(pi_2 - arg) where pi_2 is an
+ approximation for pi/2
+ */
+ /* The next step is to fix the answer to compensate for the
+ error due to the approximation used for pi/2
+ */
+
+ /* This is (approx) delta, the error in our approx for pi/2
+ (see above). It has an exponent of -65
+ */
+ XSIG_LL(fix_up) = 0x898cc51701b839a2LL;
+ fix_up.lsw = 0;
+
+ if ( exponent == 0 )
+ adj = 0xffffffff; /* We want approx 1.0 here, but
+ this is close enough. */
+ else if ( exponent > -30 )
+ {
+ adj = accum.msw >> -(exponent+1); /* tan */
+ adj = mul_32_32(adj, adj); /* tan^2 */
+ }
+ else
+ adj = 0;
+ adj = mul_32_32(0x898cc517, adj); /* delta * tan^2 */
+
+ fix_up.msw += adj;
+ if ( !(fix_up.msw & 0x80000000) ) /* did fix_up overflow ? */
+ {
+ /* Yes, we need to add an msb */
+ shr_Xsig(&fix_up, 1);
+ fix_up.msw |= 0x80000000;
+ shr_Xsig(&fix_up, 64 + exponent);
+ }
+ else
+ shr_Xsig(&fix_up, 65 + exponent);
+
+ add_two_Xsig(&accum, &fix_up, &exponent);
+
+ /* accum now contains tan(pi/2 - arg).
+ Use tan(arg) = 1.0 / tan(pi/2 - arg)
+ */
+ accumulatoro.lsw = accumulatoro.midw = 0;
+ accumulatoro.msw = 0x80000000;
+ div_Xsig(&accumulatoro, &accum, &accum);
+ exponent = - exponent - 1;
+ }
+
+ /* Transfer the result */
+ round_Xsig(&accum);
+ FPU_settag0(TAG_Valid);
+ significand(st0_ptr) = XSIG_LL(accum);
+ setexponent16(st0_ptr, exponent + EXTENDED_Ebias); /* Result is positive. */
+
+}
diff --git a/arch/i386/math-emu/polynom_Xsig.S b/arch/i386/math-emu/polynom_Xsig.S
new file mode 100644
index 0000000..17315c8
--- /dev/null
+++ b/arch/i386/math-emu/polynom_Xsig.S
@@ -0,0 +1,135 @@
+/*---------------------------------------------------------------------------+
+ | polynomial_Xsig.S |
+ | |
+ | Fixed point arithmetic polynomial evaluation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Call from C as: |
+ | void polynomial_Xsig(Xsig *accum, unsigned long long x, |
+ | unsigned long long terms[], int n) |
+ | |
+ | Computes: |
+ | terms[0] + (terms[1] + (terms[2] + ... + (terms[n-1]*x)*x)*x)*x) ... )*x |
+ | and adds the result to the 12 byte Xsig. |
+ | The terms[] are each 8 bytes, but all computation is performed to 12 byte |
+ | precision. |
+ | |
+ | This function must be used carefully: most overflow of intermediate |
+ | results is controlled, but overflow of the result is not. |
+ | |
+ +---------------------------------------------------------------------------*/
+ .file "polynomial_Xsig.S"
+
+#include "fpu_emu.h"
+
+
+#define TERM_SIZE $8
+#define SUM_MS -20(%ebp) /* sum ms long */
+#define SUM_MIDDLE -24(%ebp) /* sum middle long */
+#define SUM_LS -28(%ebp) /* sum ls long */
+#define ACCUM_MS -4(%ebp) /* accum ms long */
+#define ACCUM_MIDDLE -8(%ebp) /* accum middle long */
+#define ACCUM_LS -12(%ebp) /* accum ls long */
+#define OVERFLOWED -16(%ebp) /* addition overflow flag */
+
+.text
+ENTRY(polynomial_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ subl $32,%esp
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM2,%esi /* x */
+ movl PARAM3,%edi /* terms */
+
+ movl TERM_SIZE,%eax
+ mull PARAM4 /* n */
+ addl %eax,%edi
+
+ movl 4(%edi),%edx /* terms[n] */
+ movl %edx,SUM_MS
+ movl (%edi),%edx /* terms[n] */
+ movl %edx,SUM_MIDDLE
+ xor %eax,%eax
+ movl %eax,SUM_LS
+ movb %al,OVERFLOWED
+
+ subl TERM_SIZE,%edi
+ decl PARAM4
+ js L_accum_done
+
+L_accum_loop:
+ xor %eax,%eax
+ movl %eax,ACCUM_MS
+ movl %eax,ACCUM_MIDDLE
+
+ movl SUM_MIDDLE,%eax
+ mull (%esi) /* x ls long */
+ movl %edx,ACCUM_LS
+
+ movl SUM_MIDDLE,%eax
+ mull 4(%esi) /* x ms long */
+ addl %eax,ACCUM_LS
+ adcl %edx,ACCUM_MIDDLE
+ adcl $0,ACCUM_MS
+
+ movl SUM_MS,%eax
+ mull (%esi) /* x ls long */
+ addl %eax,ACCUM_LS
+ adcl %edx,ACCUM_MIDDLE
+ adcl $0,ACCUM_MS
+
+ movl SUM_MS,%eax
+ mull 4(%esi) /* x ms long */
+ addl %eax,ACCUM_MIDDLE
+ adcl %edx,ACCUM_MS
+
+ testb $0xff,OVERFLOWED
+ jz L_no_overflow
+
+ movl (%esi),%eax
+ addl %eax,ACCUM_MIDDLE
+ movl 4(%esi),%eax
+ adcl %eax,ACCUM_MS /* This could overflow too */
+
+L_no_overflow:
+
+/*
+ * Now put the sum of next term and the accumulator
+ * into the sum register
+ */
+ movl ACCUM_LS,%eax
+ addl (%edi),%eax /* term ls long */
+ movl %eax,SUM_LS
+ movl ACCUM_MIDDLE,%eax
+ adcl (%edi),%eax /* term ls long */
+ movl %eax,SUM_MIDDLE
+ movl ACCUM_MS,%eax
+ adcl 4(%edi),%eax /* term ms long */
+ movl %eax,SUM_MS
+ sbbb %al,%al
+ movb %al,OVERFLOWED /* Used in the next iteration */
+
+ subl TERM_SIZE,%edi
+ decl PARAM4
+ jns L_accum_loop
+
+L_accum_done:
+ movl PARAM1,%edi /* accum */
+ movl SUM_LS,%eax
+ addl %eax,(%edi)
+ movl SUM_MIDDLE,%eax
+ adcl %eax,4(%edi)
+ movl SUM_MS,%eax
+ adcl %eax,8(%edi)
+
+ popl %ebx
+ popl %edi
+ popl %esi
+ leave
+ ret
diff --git a/arch/i386/math-emu/reg_add_sub.c b/arch/i386/math-emu/reg_add_sub.c
new file mode 100644
index 0000000..7cd3b37a
--- /dev/null
+++ b/arch/i386/math-emu/reg_add_sub.c
@@ -0,0 +1,374 @@
+/*---------------------------------------------------------------------------+
+ | reg_add_sub.c |
+ | |
+ | Functions to add or subtract two registers and put the result in a third. |
+ | |
+ | Copyright (C) 1992,1993,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | For each function, the destination may be any FPU_REG, including one of |
+ | the source FPU_REGs. |
+ | Each function returns 0 if the answer is o.k., otherwise a non-zero |
+ | value is returned, indicating either an exception condition or an |
+ | internal error. |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+#include "fpu_system.h"
+
+static
+int add_sub_specials(FPU_REG const *a, u_char taga, u_char signa,
+ FPU_REG const *b, u_char tagb, u_char signb,
+ FPU_REG *dest, int deststnr, int control_w);
+
+/*
+ Operates on st(0) and st(n), or on st(0) and temporary data.
+ The destination must be one of the source st(x).
+ */
+int FPU_add(FPU_REG const *b, u_char tagb, int deststnr, int control_w)
+{
+ FPU_REG *a = &st(0);
+ FPU_REG *dest = &st(deststnr);
+ u_char signb = getsign(b);
+ u_char taga = FPU_gettag0();
+ u_char signa = getsign(a);
+ u_char saved_sign = getsign(dest);
+ int diff, tag, expa, expb;
+
+ if ( !(taga | tagb) )
+ {
+ expa = exponent(a);
+ expb = exponent(b);
+
+ valid_add:
+ /* Both registers are valid */
+ if (!(signa ^ signb))
+ {
+ /* signs are the same */
+ tag = FPU_u_add(a, b, dest, control_w, signa, expa, expb);
+ }
+ else
+ {
+ /* The signs are different, so do a subtraction */
+ diff = expa - expb;
+ if (!diff)
+ {
+ diff = a->sigh - b->sigh; /* This works only if the ms bits
+ are identical. */
+ if (!diff)
+ {
+ diff = a->sigl > b->sigl;
+ if (!diff)
+ diff = -(a->sigl < b->sigl);
+ }
+ }
+
+ if (diff > 0)
+ {
+ tag = FPU_u_sub(a, b, dest, control_w, signa, expa, expb);
+ }
+ else if ( diff < 0 )
+ {
+ tag = FPU_u_sub(b, a, dest, control_w, signb, expb, expa);
+ }
+ else
+ {
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+ /* sign depends upon rounding mode */
+ setsign(dest, ((control_w & CW_RC) != RC_DOWN)
+ ? SIGN_POS : SIGN_NEG);
+ return TAG_Zero;
+ }
+ }
+
+ if ( tag < 0 )
+ {
+ setsign(dest, saved_sign);
+ return tag;
+ }
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+
+ if ( taga == TAG_Special )
+ taga = FPU_Special(a);
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+
+ if ( ((taga == TAG_Valid) && (tagb == TW_Denormal))
+ || ((taga == TW_Denormal) && (tagb == TAG_Valid))
+ || ((taga == TW_Denormal) && (tagb == TW_Denormal)) )
+ {
+ FPU_REG x, y;
+
+ if ( denormal_operand() < 0 )
+ return FPU_Exception;
+
+ FPU_to_exp16(a, &x);
+ FPU_to_exp16(b, &y);
+ a = &x;
+ b = &y;
+ expa = exponent16(a);
+ expb = exponent16(b);
+ goto valid_add;
+ }
+
+ if ( (taga == TW_NaN) || (tagb == TW_NaN) )
+ {
+ if ( deststnr == 0 )
+ return real_2op_NaN(b, tagb, deststnr, a);
+ else
+ return real_2op_NaN(a, taga, deststnr, a);
+ }
+
+ return add_sub_specials(a, taga, signa, b, tagb, signb,
+ dest, deststnr, control_w);
+}
+
+
+/* Subtract b from a. (a-b) -> dest */
+int FPU_sub(int flags, int rm, int control_w)
+{
+ FPU_REG const *a, *b;
+ FPU_REG *dest;
+ u_char taga, tagb, signa, signb, saved_sign, sign;
+ int diff, tag = 0, expa, expb, deststnr;
+
+ a = &st(0);
+ taga = FPU_gettag0();
+
+ deststnr = 0;
+ if ( flags & LOADED )
+ {
+ b = (FPU_REG *)rm;
+ tagb = flags & 0x0f;
+ }
+ else
+ {
+ b = &st(rm);
+ tagb = FPU_gettagi(rm);
+
+ if ( flags & DEST_RM )
+ deststnr = rm;
+ }
+
+ signa = getsign(a);
+ signb = getsign(b);
+
+ if ( flags & REV )
+ {
+ signa ^= SIGN_NEG;
+ signb ^= SIGN_NEG;
+ }
+
+ dest = &st(deststnr);
+ saved_sign = getsign(dest);
+
+ if ( !(taga | tagb) )
+ {
+ expa = exponent(a);
+ expb = exponent(b);
+
+ valid_subtract:
+ /* Both registers are valid */
+
+ diff = expa - expb;
+
+ if (!diff)
+ {
+ diff = a->sigh - b->sigh; /* Works only if ms bits are identical */
+ if (!diff)
+ {
+ diff = a->sigl > b->sigl;
+ if (!diff)
+ diff = -(a->sigl < b->sigl);
+ }
+ }
+
+ switch ( (((int)signa)*2 + signb) / SIGN_NEG )
+ {
+ case 0: /* P - P */
+ case 3: /* N - N */
+ if (diff > 0)
+ {
+ /* |a| > |b| */
+ tag = FPU_u_sub(a, b, dest, control_w, signa, expa, expb);
+ }
+ else if ( diff == 0 )
+ {
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+
+ /* sign depends upon rounding mode */
+ setsign(dest, ((control_w & CW_RC) != RC_DOWN)
+ ? SIGN_POS : SIGN_NEG);
+ return TAG_Zero;
+ }
+ else
+ {
+ sign = signa ^ SIGN_NEG;
+ tag = FPU_u_sub(b, a, dest, control_w, sign, expb, expa);
+ }
+ break;
+ case 1: /* P - N */
+ tag = FPU_u_add(a, b, dest, control_w, SIGN_POS, expa, expb);
+ break;
+ case 2: /* N - P */
+ tag = FPU_u_add(a, b, dest, control_w, SIGN_NEG, expa, expb);
+ break;
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x111);
+ return -1;
+#endif
+ }
+ if ( tag < 0 )
+ {
+ setsign(dest, saved_sign);
+ return tag;
+ }
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+
+ if ( taga == TAG_Special )
+ taga = FPU_Special(a);
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+
+ if ( ((taga == TAG_Valid) && (tagb == TW_Denormal))
+ || ((taga == TW_Denormal) && (tagb == TAG_Valid))
+ || ((taga == TW_Denormal) && (tagb == TW_Denormal)) )
+ {
+ FPU_REG x, y;
+
+ if ( denormal_operand() < 0 )
+ return FPU_Exception;
+
+ FPU_to_exp16(a, &x);
+ FPU_to_exp16(b, &y);
+ a = &x;
+ b = &y;
+ expa = exponent16(a);
+ expb = exponent16(b);
+
+ goto valid_subtract;
+ }
+
+ if ( (taga == TW_NaN) || (tagb == TW_NaN) )
+ {
+ FPU_REG const *d1, *d2;
+ if ( flags & REV )
+ {
+ d1 = b;
+ d2 = a;
+ }
+ else
+ {
+ d1 = a;
+ d2 = b;
+ }
+ if ( flags & LOADED )
+ return real_2op_NaN(b, tagb, deststnr, d1);
+ if ( flags & DEST_RM )
+ return real_2op_NaN(a, taga, deststnr, d2);
+ else
+ return real_2op_NaN(b, tagb, deststnr, d2);
+ }
+
+ return add_sub_specials(a, taga, signa, b, tagb, signb ^ SIGN_NEG,
+ dest, deststnr, control_w);
+}
+
+
+static
+int add_sub_specials(FPU_REG const *a, u_char taga, u_char signa,
+ FPU_REG const *b, u_char tagb, u_char signb,
+ FPU_REG *dest, int deststnr, int control_w)
+{
+ if ( ((taga == TW_Denormal) || (tagb == TW_Denormal))
+ && (denormal_operand() < 0) )
+ return FPU_Exception;
+
+ if (taga == TAG_Zero)
+ {
+ if (tagb == TAG_Zero)
+ {
+ /* Both are zero, result will be zero. */
+ u_char different_signs = signa ^ signb;
+
+ FPU_copy_to_regi(a, TAG_Zero, deststnr);
+ if ( different_signs )
+ {
+ /* Signs are different. */
+ /* Sign of answer depends upon rounding mode. */
+ setsign(dest, ((control_w & CW_RC) != RC_DOWN)
+ ? SIGN_POS : SIGN_NEG);
+ }
+ else
+ setsign(dest, signa); /* signa may differ from the sign of a. */
+ return TAG_Zero;
+ }
+ else
+ {
+ reg_copy(b, dest);
+ if ( (tagb == TW_Denormal) && (b->sigh & 0x80000000) )
+ {
+ /* A pseudoDenormal, convert it. */
+ addexponent(dest, 1);
+ tagb = TAG_Valid;
+ }
+ else if ( tagb > TAG_Empty )
+ tagb = TAG_Special;
+ setsign(dest, signb); /* signb may differ from the sign of b. */
+ FPU_settagi(deststnr, tagb);
+ return tagb;
+ }
+ }
+ else if (tagb == TAG_Zero)
+ {
+ reg_copy(a, dest);
+ if ( (taga == TW_Denormal) && (a->sigh & 0x80000000) )
+ {
+ /* A pseudoDenormal */
+ addexponent(dest, 1);
+ taga = TAG_Valid;
+ }
+ else if ( taga > TAG_Empty )
+ taga = TAG_Special;
+ setsign(dest, signa); /* signa may differ from the sign of a. */
+ FPU_settagi(deststnr, taga);
+ return taga;
+ }
+ else if (taga == TW_Infinity)
+ {
+ if ( (tagb != TW_Infinity) || (signa == signb) )
+ {
+ FPU_copy_to_regi(a, TAG_Special, deststnr);
+ setsign(dest, signa); /* signa may differ from the sign of a. */
+ return taga;
+ }
+ /* Infinity-Infinity is undefined. */
+ return arith_invalid(deststnr);
+ }
+ else if (tagb == TW_Infinity)
+ {
+ FPU_copy_to_regi(b, TAG_Special, deststnr);
+ setsign(dest, signb); /* signb may differ from the sign of b. */
+ return tagb;
+ }
+
+#ifdef PARANOID
+ EXCEPTION(EX_INTERNAL|0x101);
+#endif
+
+ return FPU_Exception;
+}
+
diff --git a/arch/i386/math-emu/reg_compare.c b/arch/i386/math-emu/reg_compare.c
new file mode 100644
index 0000000..f37c5b5
--- /dev/null
+++ b/arch/i386/math-emu/reg_compare.c
@@ -0,0 +1,381 @@
+/*---------------------------------------------------------------------------+
+ | reg_compare.c |
+ | |
+ | Compare two floating point registers |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | compare() is the core FPU_REG comparison function |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+#include "status_w.h"
+
+
+static int compare(FPU_REG const *b, int tagb)
+{
+ int diff, exp0, expb;
+ u_char st0_tag;
+ FPU_REG *st0_ptr;
+ FPU_REG x, y;
+ u_char st0_sign, signb = getsign(b);
+
+ st0_ptr = &st(0);
+ st0_tag = FPU_gettag0();
+ st0_sign = getsign(st0_ptr);
+
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+ if ( st0_tag == TAG_Special )
+ st0_tag = FPU_Special(st0_ptr);
+
+ if ( ((st0_tag != TAG_Valid) && (st0_tag != TW_Denormal))
+ || ((tagb != TAG_Valid) && (tagb != TW_Denormal)) )
+ {
+ if ( st0_tag == TAG_Zero )
+ {
+ if ( tagb == TAG_Zero ) return COMP_A_eq_B;
+ if ( tagb == TAG_Valid )
+ return ((signb == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B);
+ if ( tagb == TW_Denormal )
+ return ((signb == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
+ | COMP_Denormal;
+ }
+ else if ( tagb == TAG_Zero )
+ {
+ if ( st0_tag == TAG_Valid )
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
+ if ( st0_tag == TW_Denormal )
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
+ | COMP_Denormal;
+ }
+
+ if ( st0_tag == TW_Infinity )
+ {
+ if ( (tagb == TAG_Valid) || (tagb == TAG_Zero) )
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
+ else if ( tagb == TW_Denormal )
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
+ | COMP_Denormal;
+ else if ( tagb == TW_Infinity )
+ {
+ /* The 80486 book says that infinities can be equal! */
+ return (st0_sign == signb) ? COMP_A_eq_B :
+ ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
+ }
+ /* Fall through to the NaN code */
+ }
+ else if ( tagb == TW_Infinity )
+ {
+ if ( (st0_tag == TAG_Valid) || (st0_tag == TAG_Zero) )
+ return ((signb == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B);
+ if ( st0_tag == TW_Denormal )
+ return ((signb == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
+ | COMP_Denormal;
+ /* Fall through to the NaN code */
+ }
+
+ /* The only possibility now should be that one of the arguments
+ is a NaN */
+ if ( (st0_tag == TW_NaN) || (tagb == TW_NaN) )
+ {
+ int signalling = 0, unsupported = 0;
+ if ( st0_tag == TW_NaN )
+ {
+ signalling = (st0_ptr->sigh & 0xc0000000) == 0x80000000;
+ unsupported = !((exponent(st0_ptr) == EXP_OVER)
+ && (st0_ptr->sigh & 0x80000000));
+ }
+ if ( tagb == TW_NaN )
+ {
+ signalling |= (b->sigh & 0xc0000000) == 0x80000000;
+ unsupported |= !((exponent(b) == EXP_OVER)
+ && (b->sigh & 0x80000000));
+ }
+ if ( signalling || unsupported )
+ return COMP_No_Comp | COMP_SNaN | COMP_NaN;
+ else
+ /* Neither is a signaling NaN */
+ return COMP_No_Comp | COMP_NaN;
+ }
+
+ EXCEPTION(EX_Invalid);
+ }
+
+ if (st0_sign != signb)
+ {
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
+ | ( ((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
+ COMP_Denormal : 0);
+ }
+
+ if ( (st0_tag == TW_Denormal) || (tagb == TW_Denormal) )
+ {
+ FPU_to_exp16(st0_ptr, &x);
+ FPU_to_exp16(b, &y);
+ st0_ptr = &x;
+ b = &y;
+ exp0 = exponent16(st0_ptr);
+ expb = exponent16(b);
+ }
+ else
+ {
+ exp0 = exponent(st0_ptr);
+ expb = exponent(b);
+ }
+
+#ifdef PARANOID
+ if (!(st0_ptr->sigh & 0x80000000)) EXCEPTION(EX_Invalid);
+ if (!(b->sigh & 0x80000000)) EXCEPTION(EX_Invalid);
+#endif /* PARANOID */
+
+ diff = exp0 - expb;
+ if ( diff == 0 )
+ {
+ diff = st0_ptr->sigh - b->sigh; /* Works only if ms bits are
+ identical */
+ if ( diff == 0 )
+ {
+ diff = st0_ptr->sigl > b->sigl;
+ if ( diff == 0 )
+ diff = -(st0_ptr->sigl < b->sigl);
+ }
+ }
+
+ if ( diff > 0 )
+ {
+ return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
+ | ( ((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
+ COMP_Denormal : 0);
+ }
+ if ( diff < 0 )
+ {
+ return ((st0_sign == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
+ | ( ((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
+ COMP_Denormal : 0);
+ }
+
+ return COMP_A_eq_B
+ | ( ((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
+ COMP_Denormal : 0);
+
+}
+
+
+/* This function requires that st(0) is not empty */
+int FPU_compare_st_data(FPU_REG const *loaded_data, u_char loaded_tag)
+{
+ int f = 0, c;
+
+ c = compare(loaded_data, loaded_tag);
+
+ if (c & COMP_NaN)
+ {
+ EXCEPTION(EX_Invalid);
+ f = SW_C3 | SW_C2 | SW_C0;
+ }
+ else
+ switch (c & 7)
+ {
+ case COMP_A_lt_B:
+ f = SW_C0;
+ break;
+ case COMP_A_eq_B:
+ f = SW_C3;
+ break;
+ case COMP_A_gt_B:
+ f = 0;
+ break;
+ case COMP_No_Comp:
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x121);
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#endif /* PARANOID */
+ }
+ setcc(f);
+ if (c & COMP_Denormal)
+ {
+ return denormal_operand() < 0;
+ }
+ return 0;
+}
+
+
+static int compare_st_st(int nr)
+{
+ int f = 0, c;
+ FPU_REG *st_ptr;
+
+ if ( !NOT_EMPTY(0) || !NOT_EMPTY(nr) )
+ {
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ /* Stack fault */
+ EXCEPTION(EX_StackUnder);
+ return !(control_word & CW_Invalid);
+ }
+
+ st_ptr = &st(nr);
+ c = compare(st_ptr, FPU_gettagi(nr));
+ if (c & COMP_NaN)
+ {
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ EXCEPTION(EX_Invalid);
+ return !(control_word & CW_Invalid);
+ }
+ else
+ switch (c & 7)
+ {
+ case COMP_A_lt_B:
+ f = SW_C0;
+ break;
+ case COMP_A_eq_B:
+ f = SW_C3;
+ break;
+ case COMP_A_gt_B:
+ f = 0;
+ break;
+ case COMP_No_Comp:
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x122);
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#endif /* PARANOID */
+ }
+ setcc(f);
+ if (c & COMP_Denormal)
+ {
+ return denormal_operand() < 0;
+ }
+ return 0;
+}
+
+
+static int compare_u_st_st(int nr)
+{
+ int f = 0, c;
+ FPU_REG *st_ptr;
+
+ if ( !NOT_EMPTY(0) || !NOT_EMPTY(nr) )
+ {
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ /* Stack fault */
+ EXCEPTION(EX_StackUnder);
+ return !(control_word & CW_Invalid);
+ }
+
+ st_ptr = &st(nr);
+ c = compare(st_ptr, FPU_gettagi(nr));
+ if (c & COMP_NaN)
+ {
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ if (c & COMP_SNaN) /* This is the only difference between
+ un-ordered and ordinary comparisons */
+ {
+ EXCEPTION(EX_Invalid);
+ return !(control_word & CW_Invalid);
+ }
+ return 0;
+ }
+ else
+ switch (c & 7)
+ {
+ case COMP_A_lt_B:
+ f = SW_C0;
+ break;
+ case COMP_A_eq_B:
+ f = SW_C3;
+ break;
+ case COMP_A_gt_B:
+ f = 0;
+ break;
+ case COMP_No_Comp:
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#ifdef PARANOID
+ default:
+ EXCEPTION(EX_INTERNAL|0x123);
+ f = SW_C3 | SW_C2 | SW_C0;
+ break;
+#endif /* PARANOID */
+ }
+ setcc(f);
+ if (c & COMP_Denormal)
+ {
+ return denormal_operand() < 0;
+ }
+ return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+void fcom_st(void)
+{
+ /* fcom st(i) */
+ compare_st_st(FPU_rm);
+}
+
+
+void fcompst(void)
+{
+ /* fcomp st(i) */
+ if ( !compare_st_st(FPU_rm) )
+ FPU_pop();
+}
+
+
+void fcompp(void)
+{
+ /* fcompp */
+ if (FPU_rm != 1)
+ {
+ FPU_illegal();
+ return;
+ }
+ if ( !compare_st_st(1) )
+ poppop();
+}
+
+
+void fucom_(void)
+{
+ /* fucom st(i) */
+ compare_u_st_st(FPU_rm);
+
+}
+
+
+void fucomp(void)
+{
+ /* fucomp st(i) */
+ if ( !compare_u_st_st(FPU_rm) )
+ FPU_pop();
+}
+
+
+void fucompp(void)
+{
+ /* fucompp */
+ if (FPU_rm == 1)
+ {
+ if ( !compare_u_st_st(1) )
+ poppop();
+ }
+ else
+ FPU_illegal();
+}
diff --git a/arch/i386/math-emu/reg_constant.c b/arch/i386/math-emu/reg_constant.c
new file mode 100644
index 0000000..a850158
--- /dev/null
+++ b/arch/i386/math-emu/reg_constant.c
@@ -0,0 +1,120 @@
+/*---------------------------------------------------------------------------+
+ | reg_constant.c |
+ | |
+ | All of the constant FPU_REGs |
+ | |
+ | Copyright (C) 1992,1993,1994,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_system.h"
+#include "fpu_emu.h"
+#include "status_w.h"
+#include "reg_constant.h"
+#include "control_w.h"
+
+
+#define MAKE_REG(s,e,l,h) { l, h, \
+ ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
+
+FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000);
+#if 0
+FPU_REG const CONST_2 = MAKE_REG(POS, 1, 0x00000000, 0x80000000);
+FPU_REG const CONST_HALF = MAKE_REG(POS, -1, 0x00000000, 0x80000000);
+#endif /* 0 */
+static FPU_REG const CONST_L2T = MAKE_REG(POS, 1, 0xcd1b8afe, 0xd49a784b);
+static FPU_REG const CONST_L2E = MAKE_REG(POS, 0, 0x5c17f0bc, 0xb8aa3b29);
+FPU_REG const CONST_PI = MAKE_REG(POS, 1, 0x2168c235, 0xc90fdaa2);
+FPU_REG const CONST_PI2 = MAKE_REG(POS, 0, 0x2168c235, 0xc90fdaa2);
+FPU_REG const CONST_PI4 = MAKE_REG(POS, -1, 0x2168c235, 0xc90fdaa2);
+static FPU_REG const CONST_LG2 = MAKE_REG(POS, -2, 0xfbcff799, 0x9a209a84);
+static FPU_REG const CONST_LN2 = MAKE_REG(POS, -1, 0xd1cf79ac, 0xb17217f7);
+
+/* Extra bits to take pi/2 to more than 128 bits precision. */
+FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
+ 0xfc8f8cbb, 0xece675d1);
+
+/* Only the sign (and tag) is used in internal zeroes */
+FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0);
+
+/* Only the sign and significand (and tag) are used in internal NaNs */
+/* The 80486 never generates one of these
+FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000);
+ */
+/* This is the real indefinite QNaN */
+FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
+
+/* Only the sign (and tag) is used in internal infinities */
+FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000);
+
+
+static void fld_const(FPU_REG const *c, int adj, u_char tag)
+{
+ FPU_REG *st_new_ptr;
+
+ if ( STACK_OVERFLOW )
+ {
+ FPU_stack_overflow();
+ return;
+ }
+ push();
+ reg_copy(c, st_new_ptr);
+ st_new_ptr->sigl += adj; /* For all our fldxxx constants, we don't need to
+ borrow or carry. */
+ FPU_settag0(tag);
+ clear_C1();
+}
+
+/* A fast way to find out whether x is one of RC_DOWN or RC_CHOP
+ (and not one of RC_RND or RC_UP).
+ */
+#define DOWN_OR_CHOP(x) (x & RC_DOWN)
+
+static void fld1(int rc)
+{
+ fld_const(&CONST_1, 0, TAG_Valid);
+}
+
+static void fldl2t(int rc)
+{
+ fld_const(&CONST_L2T, (rc == RC_UP) ? 1 : 0, TAG_Valid);
+}
+
+static void fldl2e(int rc)
+{
+ fld_const(&CONST_L2E, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
+}
+
+static void fldpi(int rc)
+{
+ fld_const(&CONST_PI, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
+}
+
+static void fldlg2(int rc)
+{
+ fld_const(&CONST_LG2, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
+}
+
+static void fldln2(int rc)
+{
+ fld_const(&CONST_LN2, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
+}
+
+static void fldz(int rc)
+{
+ fld_const(&CONST_Z, 0, TAG_Zero);
+}
+
+typedef void (*FUNC_RC)(int);
+
+static FUNC_RC constants_table[] = {
+ fld1, fldl2t, fldl2e, fldpi, fldlg2, fldln2, fldz, (FUNC_RC)FPU_illegal
+};
+
+void fconst(void)
+{
+ (constants_table[FPU_rm])(control_word & CW_RC);
+}
diff --git a/arch/i386/math-emu/reg_constant.h b/arch/i386/math-emu/reg_constant.h
new file mode 100644
index 0000000..1bffaec
--- /dev/null
+++ b/arch/i386/math-emu/reg_constant.h
@@ -0,0 +1,25 @@
+/*---------------------------------------------------------------------------+
+ | reg_constant.h |
+ | |
+ | Copyright (C) 1992 W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@vaxc.cc.monash.edu.au |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _REG_CONSTANT_H_
+#define _REG_CONSTANT_H_
+
+#include "fpu_emu.h"
+
+extern FPU_REG const CONST_1;
+extern FPU_REG const CONST_PI;
+extern FPU_REG const CONST_PI2;
+extern FPU_REG const CONST_PI2extra;
+extern FPU_REG const CONST_PI4;
+extern FPU_REG const CONST_Z;
+extern FPU_REG const CONST_PINF;
+extern FPU_REG const CONST_INF;
+extern FPU_REG const CONST_MINF;
+extern FPU_REG const CONST_QNaN;
+
+#endif /* _REG_CONSTANT_H_ */
diff --git a/arch/i386/math-emu/reg_convert.c b/arch/i386/math-emu/reg_convert.c
new file mode 100644
index 0000000..45a2587
--- /dev/null
+++ b/arch/i386/math-emu/reg_convert.c
@@ -0,0 +1,53 @@
+/*---------------------------------------------------------------------------+
+ | reg_convert.c |
+ | |
+ | Convert register representation. |
+ | |
+ | Copyright (C) 1992,1993,1994,1996,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "fpu_emu.h"
+
+
+int FPU_to_exp16(FPU_REG const *a, FPU_REG *x)
+{
+ int sign = getsign(a);
+
+ *(long long *)&(x->sigl) = *(const long long *)&(a->sigl);
+
+ /* Set up the exponent as a 16 bit quantity. */
+ setexponent16(x, exponent(a));
+
+ if ( exponent16(x) == EXP_UNDER )
+ {
+ /* The number is a de-normal or pseudodenormal. */
+ /* We only deal with the significand and exponent. */
+
+ if (x->sigh & 0x80000000)
+ {
+ /* Is a pseudodenormal. */
+ /* This is non-80486 behaviour because the number
+ loses its 'denormal' identity. */
+ addexponent(x, 1);
+ }
+ else
+ {
+ /* Is a denormal. */
+ addexponent(x, 1);
+ FPU_normalize_nuo(x);
+ }
+ }
+
+ if ( !(x->sigh & 0x80000000) )
+ {
+ EXCEPTION(EX_INTERNAL | 0x180);
+ }
+
+ return sign;
+}
+
diff --git a/arch/i386/math-emu/reg_divide.c b/arch/i386/math-emu/reg_divide.c
new file mode 100644
index 0000000..5cee7ff
--- /dev/null
+++ b/arch/i386/math-emu/reg_divide.c
@@ -0,0 +1,207 @@
+/*---------------------------------------------------------------------------+
+ | reg_divide.c |
+ | |
+ | Divide one FPU_REG by another and put the result in a destination FPU_REG.|
+ | |
+ | Copyright (C) 1996 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | The destination may be any FPU_REG, including one of the source FPU_REGs. |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_emu.h"
+#include "fpu_system.h"
+
+/*
+ Divide one register by another and put the result into a third register.
+ */
+int FPU_div(int flags, int rm, int control_w)
+{
+ FPU_REG x, y;
+ FPU_REG const *a, *b, *st0_ptr, *st_ptr;
+ FPU_REG *dest;
+ u_char taga, tagb, signa, signb, sign, saved_sign;
+ int tag, deststnr;
+
+ if ( flags & DEST_RM )
+ deststnr = rm;
+ else
+ deststnr = 0;
+
+ if ( flags & REV )
+ {
+ b = &st(0);
+ st0_ptr = b;
+ tagb = FPU_gettag0();
+ if ( flags & LOADED )
+ {
+ a = (FPU_REG *)rm;
+ taga = flags & 0x0f;
+ }
+ else
+ {
+ a = &st(rm);
+ st_ptr = a;
+ taga = FPU_gettagi(rm);
+ }
+ }
+ else
+ {
+ a = &st(0);
+ st0_ptr = a;
+ taga = FPU_gettag0();
+ if ( flags & LOADED )
+ {
+ b = (FPU_REG *)rm;
+ tagb = flags & 0x0f;
+ }
+ else
+ {
+ b = &st(rm);
+ st_ptr = b;
+ tagb = FPU_gettagi(rm);
+ }
+ }
+
+ signa = getsign(a);
+ signb = getsign(b);
+
+ sign = signa ^ signb;
+
+ dest = &st(deststnr);
+ saved_sign = getsign(dest);
+
+ if ( !(taga | tagb) )
+ {
+ /* Both regs Valid, this should be the most common case. */
+ reg_copy(a, &x);
+ reg_copy(b, &y);
+ setpositive(&x);
+ setpositive(&y);
+ tag = FPU_u_div(&x, &y, dest, control_w, sign);
+
+ if ( tag < 0 )
+ return tag;
+
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+
+ if ( taga == TAG_Special )
+ taga = FPU_Special(a);
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+
+ if ( ((taga == TAG_Valid) && (tagb == TW_Denormal))
+ || ((taga == TW_Denormal) && (tagb == TAG_Valid))
+ || ((taga == TW_Denormal) && (tagb == TW_Denormal)) )
+ {
+ if ( denormal_operand() < 0 )
+ return FPU_Exception;
+
+ FPU_to_exp16(a, &x);
+ FPU_to_exp16(b, &y);
+ tag = FPU_u_div(&x, &y, dest, control_w, sign);
+ if ( tag < 0 )
+ return tag;
+
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+ else if ( (taga <= TW_Denormal) && (tagb <= TW_Denormal) )
+ {
+ if ( tagb != TAG_Zero )
+ {
+ /* Want to find Zero/Valid */
+ if ( tagb == TW_Denormal )
+ {
+ if ( denormal_operand() < 0 )
+ return FPU_Exception;
+ }
+
+ /* The result is zero. */
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+ setsign(dest, sign);
+ return TAG_Zero;
+ }
+ /* We have an exception condition, either 0/0 or Valid/Zero. */
+ if ( taga == TAG_Zero )
+ {
+ /* 0/0 */
+ return arith_invalid(deststnr);
+ }
+ /* Valid/Zero */
+ return FPU_divide_by_zero(deststnr, sign);
+ }
+ /* Must have infinities, NaNs, etc */
+ else if ( (taga == TW_NaN) || (tagb == TW_NaN) )
+ {
+ if ( flags & LOADED )
+ return real_2op_NaN((FPU_REG *)rm, flags & 0x0f, 0, st0_ptr);
+
+ if ( flags & DEST_RM )
+ {
+ int tag;
+ tag = FPU_gettag0();
+ if ( tag == TAG_Special )
+ tag = FPU_Special(st0_ptr);
+ return real_2op_NaN(st0_ptr, tag, rm, (flags & REV) ? st0_ptr : &st(rm));
+ }
+ else
+ {
+ int tag;
+ tag = FPU_gettagi(rm);
+ if ( tag == TAG_Special )
+ tag = FPU_Special(&st(rm));
+ return real_2op_NaN(&st(rm), tag, 0, (flags & REV) ? st0_ptr : &st(rm));
+ }
+ }
+ else if (taga == TW_Infinity)
+ {
+ if (tagb == TW_Infinity)
+ {
+ /* infinity/infinity */
+ return arith_invalid(deststnr);
+ }
+ else
+ {
+ /* tagb must be Valid or Zero */
+ if ( (tagb == TW_Denormal) && (denormal_operand() < 0) )
+ return FPU_Exception;
+
+ /* Infinity divided by Zero or Valid does
+ not raise and exception, but returns Infinity */
+ FPU_copy_to_regi(a, TAG_Special, deststnr);
+ setsign(dest, sign);
+ return taga;
+ }
+ }
+ else if (tagb == TW_Infinity)
+ {
+ if ( (taga == TW_Denormal) && (denormal_operand() < 0) )
+ return FPU_Exception;
+
+ /* The result is zero. */
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+ setsign(dest, sign);
+ return TAG_Zero;
+ }
+#ifdef PARANOID
+ else
+ {
+ EXCEPTION(EX_INTERNAL|0x102);
+ return FPU_Exception;
+ }
+#endif /* PARANOID */
+
+ return 0;
+}
diff --git a/arch/i386/math-emu/reg_ld_str.c b/arch/i386/math-emu/reg_ld_str.c
new file mode 100644
index 0000000..f06ed41
--- /dev/null
+++ b/arch/i386/math-emu/reg_ld_str.c
@@ -0,0 +1,1370 @@
+/*---------------------------------------------------------------------------+
+ | reg_ld_str.c |
+ | |
+ | All of the functions which transfer data between user memory and FPU_REGs.|
+ | |
+ | Copyright (C) 1992,1993,1994,1996,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+
+#include <asm/uaccess.h>
+
+#include "fpu_system.h"
+#include "exception.h"
+#include "reg_constant.h"
+#include "control_w.h"
+#include "status_w.h"
+
+
+#define DOUBLE_Emax 1023 /* largest valid exponent */
+#define DOUBLE_Ebias 1023
+#define DOUBLE_Emin (-1022) /* smallest valid exponent */
+
+#define SINGLE_Emax 127 /* largest valid exponent */
+#define SINGLE_Ebias 127
+#define SINGLE_Emin (-126) /* smallest valid exponent */
+
+
+static u_char normalize_no_excep(FPU_REG *r, int exp, int sign)
+{
+ u_char tag;
+
+ setexponent16(r, exp);
+
+ tag = FPU_normalize_nuo(r);
+ stdexp(r);
+ if ( sign )
+ setnegative(r);
+
+ return tag;
+}
+
+
+int FPU_tagof(FPU_REG *ptr)
+{
+ int exp;
+
+ exp = exponent16(ptr) & 0x7fff;
+ if ( exp == 0 )
+ {
+ if ( !(ptr->sigh | ptr->sigl) )
+ {
+ return TAG_Zero;
+ }
+ /* The number is a de-normal or pseudodenormal. */
+ return TAG_Special;
+ }
+
+ if ( exp == 0x7fff )
+ {
+ /* Is an Infinity, a NaN, or an unsupported data type. */
+ return TAG_Special;
+ }
+
+ if ( !(ptr->sigh & 0x80000000) )
+ {
+ /* Unsupported data type. */
+ /* Valid numbers have the ms bit set to 1. */
+ /* Unnormal. */
+ return TAG_Special;
+ }
+
+ return TAG_Valid;
+}
+
+
+/* Get a long double from user memory */
+int FPU_load_extended(long double __user *s, int stnr)
+{
+ FPU_REG *sti_ptr = &st(stnr);
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, s, 10);
+ __copy_from_user(sti_ptr, s, 10);
+ RE_ENTRANT_CHECK_ON;
+
+ return FPU_tagof(sti_ptr);
+}
+
+
+/* Get a double from user memory */
+int FPU_load_double(double __user *dfloat, FPU_REG *loaded_data)
+{
+ int exp, tag, negative;
+ unsigned m64, l64;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, dfloat, 8);
+ FPU_get_user(m64, 1 + (unsigned long __user *) dfloat);
+ FPU_get_user(l64, (unsigned long __user *) dfloat);
+ RE_ENTRANT_CHECK_ON;
+
+ negative = (m64 & 0x80000000) ? SIGN_Negative : SIGN_Positive;
+ exp = ((m64 & 0x7ff00000) >> 20) - DOUBLE_Ebias + EXTENDED_Ebias;
+ m64 &= 0xfffff;
+ if ( exp > DOUBLE_Emax + EXTENDED_Ebias )
+ {
+ /* Infinity or NaN */
+ if ((m64 == 0) && (l64 == 0))
+ {
+ /* +- infinity */
+ loaded_data->sigh = 0x80000000;
+ loaded_data->sigl = 0x00000000;
+ exp = EXP_Infinity + EXTENDED_Ebias;
+ tag = TAG_Special;
+ }
+ else
+ {
+ /* Must be a signaling or quiet NaN */
+ exp = EXP_NaN + EXTENDED_Ebias;
+ loaded_data->sigh = (m64 << 11) | 0x80000000;
+ loaded_data->sigh |= l64 >> 21;
+ loaded_data->sigl = l64 << 11;
+ tag = TAG_Special; /* The calling function must look for NaNs */
+ }
+ }
+ else if ( exp < DOUBLE_Emin + EXTENDED_Ebias )
+ {
+ /* Zero or de-normal */
+ if ((m64 == 0) && (l64 == 0))
+ {
+ /* Zero */
+ reg_copy(&CONST_Z, loaded_data);
+ exp = 0;
+ tag = TAG_Zero;
+ }
+ else
+ {
+ /* De-normal */
+ loaded_data->sigh = m64 << 11;
+ loaded_data->sigh |= l64 >> 21;
+ loaded_data->sigl = l64 << 11;
+
+ return normalize_no_excep(loaded_data, DOUBLE_Emin, negative)
+ | (denormal_operand() < 0 ? FPU_Exception : 0);
+ }
+ }
+ else
+ {
+ loaded_data->sigh = (m64 << 11) | 0x80000000;
+ loaded_data->sigh |= l64 >> 21;
+ loaded_data->sigl = l64 << 11;
+
+ tag = TAG_Valid;
+ }
+
+ setexponent16(loaded_data, exp | negative);
+
+ return tag;
+}
+
+
+/* Get a float from user memory */
+int FPU_load_single(float __user *single, FPU_REG *loaded_data)
+{
+ unsigned m32;
+ int exp, tag, negative;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, single, 4);
+ FPU_get_user(m32, (unsigned long __user *) single);
+ RE_ENTRANT_CHECK_ON;
+
+ negative = (m32 & 0x80000000) ? SIGN_Negative : SIGN_Positive;
+
+ if (!(m32 & 0x7fffffff))
+ {
+ /* Zero */
+ reg_copy(&CONST_Z, loaded_data);
+ addexponent(loaded_data, negative);
+ return TAG_Zero;
+ }
+ exp = ((m32 & 0x7f800000) >> 23) - SINGLE_Ebias + EXTENDED_Ebias;
+ m32 = (m32 & 0x7fffff) << 8;
+ if ( exp < SINGLE_Emin + EXTENDED_Ebias )
+ {
+ /* De-normals */
+ loaded_data->sigh = m32;
+ loaded_data->sigl = 0;
+
+ return normalize_no_excep(loaded_data, SINGLE_Emin, negative)
+ | (denormal_operand() < 0 ? FPU_Exception : 0);
+ }
+ else if ( exp > SINGLE_Emax + EXTENDED_Ebias )
+ {
+ /* Infinity or NaN */
+ if ( m32 == 0 )
+ {
+ /* +- infinity */
+ loaded_data->sigh = 0x80000000;
+ loaded_data->sigl = 0x00000000;
+ exp = EXP_Infinity + EXTENDED_Ebias;
+ tag = TAG_Special;
+ }
+ else
+ {
+ /* Must be a signaling or quiet NaN */
+ exp = EXP_NaN + EXTENDED_Ebias;
+ loaded_data->sigh = m32 | 0x80000000;
+ loaded_data->sigl = 0;
+ tag = TAG_Special; /* The calling function must look for NaNs */
+ }
+ }
+ else
+ {
+ loaded_data->sigh = m32 | 0x80000000;
+ loaded_data->sigl = 0;
+ tag = TAG_Valid;
+ }
+
+ setexponent16(loaded_data, exp | negative); /* Set the sign. */
+
+ return tag;
+}
+
+
+/* Get a long long from user memory */
+int FPU_load_int64(long long __user *_s)
+{
+ long long s;
+ int sign;
+ FPU_REG *st0_ptr = &st(0);
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, _s, 8);
+ copy_from_user(&s,_s,8);
+ RE_ENTRANT_CHECK_ON;
+
+ if (s == 0)
+ {
+ reg_copy(&CONST_Z, st0_ptr);
+ return TAG_Zero;
+ }
+
+ if (s > 0)
+ sign = SIGN_Positive;
+ else
+ {
+ s = -s;
+ sign = SIGN_Negative;
+ }
+
+ significand(st0_ptr) = s;
+
+ return normalize_no_excep(st0_ptr, 63, sign);
+}
+
+
+/* Get a long from user memory */
+int FPU_load_int32(long __user *_s, FPU_REG *loaded_data)
+{
+ long s;
+ int negative;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, _s, 4);
+ FPU_get_user(s, _s);
+ RE_ENTRANT_CHECK_ON;
+
+ if (s == 0)
+ { reg_copy(&CONST_Z, loaded_data); return TAG_Zero; }
+
+ if (s > 0)
+ negative = SIGN_Positive;
+ else
+ {
+ s = -s;
+ negative = SIGN_Negative;
+ }
+
+ loaded_data->sigh = s;
+ loaded_data->sigl = 0;
+
+ return normalize_no_excep(loaded_data, 31, negative);
+}
+
+
+/* Get a short from user memory */
+int FPU_load_int16(short __user *_s, FPU_REG *loaded_data)
+{
+ int s, negative;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, _s, 2);
+ /* Cast as short to get the sign extended. */
+ FPU_get_user(s, _s);
+ RE_ENTRANT_CHECK_ON;
+
+ if (s == 0)
+ { reg_copy(&CONST_Z, loaded_data); return TAG_Zero; }
+
+ if (s > 0)
+ negative = SIGN_Positive;
+ else
+ {
+ s = -s;
+ negative = SIGN_Negative;
+ }
+
+ loaded_data->sigh = s << 16;
+ loaded_data->sigl = 0;
+
+ return normalize_no_excep(loaded_data, 15, negative);
+}
+
+
+/* Get a packed bcd array from user memory */
+int FPU_load_bcd(u_char __user *s)
+{
+ FPU_REG *st0_ptr = &st(0);
+ int pos;
+ u_char bcd;
+ long long l=0;
+ int sign;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, s, 10);
+ RE_ENTRANT_CHECK_ON;
+ for ( pos = 8; pos >= 0; pos--)
+ {
+ l *= 10;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_get_user(bcd, s+pos);
+ RE_ENTRANT_CHECK_ON;
+ l += bcd >> 4;
+ l *= 10;
+ l += bcd & 0x0f;
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_get_user(sign, s+9);
+ sign = sign & 0x80 ? SIGN_Negative : SIGN_Positive;
+ RE_ENTRANT_CHECK_ON;
+
+ if ( l == 0 )
+ {
+ reg_copy(&CONST_Z, st0_ptr);
+ addexponent(st0_ptr, sign); /* Set the sign. */
+ return TAG_Zero;
+ }
+ else
+ {
+ significand(st0_ptr) = l;
+ return normalize_no_excep(st0_ptr, 63, sign);
+ }
+}
+
+/*===========================================================================*/
+
+/* Put a long double into user memory */
+int FPU_store_extended(FPU_REG *st0_ptr, u_char st0_tag, long double __user *d)
+{
+ /*
+ The only exception raised by an attempt to store to an
+ extended format is the Invalid Stack exception, i.e.
+ attempting to store from an empty register.
+ */
+
+ if ( st0_tag != TAG_Empty )
+ {
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE, d, 10);
+
+ FPU_put_user(st0_ptr->sigl, (unsigned long __user *) d);
+ FPU_put_user(st0_ptr->sigh, (unsigned long __user *) ((u_char __user *)d + 4));
+ FPU_put_user(exponent16(st0_ptr), (unsigned short __user *) ((u_char __user *)d + 8));
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+ }
+
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ /* Put out the QNaN indefinite */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,10);
+ FPU_put_user(0, (unsigned long __user *) d);
+ FPU_put_user(0xc0000000, 1 + (unsigned long __user *) d);
+ FPU_put_user(0xffff, 4 + (short __user *) d);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ }
+ else
+ return 0;
+
+}
+
+
+/* Put a double into user memory */
+int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
+{
+ unsigned long l[2];
+ unsigned long increment = 0; /* avoid gcc warnings */
+ int precision_loss;
+ int exp;
+ FPU_REG tmp;
+
+ if ( st0_tag == TAG_Valid )
+ {
+ reg_copy(st0_ptr, &tmp);
+ exp = exponent(&tmp);
+
+ if ( exp < DOUBLE_Emin ) /* It may be a denormal */
+ {
+ addexponent(&tmp, -DOUBLE_Emin + 52); /* largest exp to be 51 */
+
+ denormal_arg:
+
+ if ( (precision_loss = FPU_round_to_int(&tmp, st0_tag)) )
+ {
+#ifdef PECULIAR_486
+ /* Did it round to a non-denormal ? */
+ /* This behaviour might be regarded as peculiar, it appears
+ that the 80486 rounds to the dest precision, then
+ converts to decide underflow. */
+ if ( !((tmp.sigh == 0x00100000) && (tmp.sigl == 0) &&
+ (st0_ptr->sigl & 0x000007ff)) )
+#endif /* PECULIAR_486 */
+ {
+ EXCEPTION(EX_Underflow);
+ /* This is a special case: see sec 16.2.5.1 of
+ the 80486 book */
+ if ( !(control_word & CW_Underflow) )
+ return 0;
+ }
+ EXCEPTION(precision_loss);
+ if ( !(control_word & CW_Precision) )
+ return 0;
+ }
+ l[0] = tmp.sigl;
+ l[1] = tmp.sigh;
+ }
+ else
+ {
+ if ( tmp.sigl & 0x000007ff )
+ {
+ precision_loss = 1;
+ switch (control_word & CW_RC)
+ {
+ case RC_RND:
+ /* Rounding can get a little messy.. */
+ increment = ((tmp.sigl & 0x7ff) > 0x400) | /* nearest */
+ ((tmp.sigl & 0xc00) == 0xc00); /* odd -> even */
+ break;
+ case RC_DOWN: /* towards -infinity */
+ increment = signpositive(&tmp) ? 0 : tmp.sigl & 0x7ff;
+ break;
+ case RC_UP: /* towards +infinity */
+ increment = signpositive(&tmp) ? tmp.sigl & 0x7ff : 0;
+ break;
+ case RC_CHOP:
+ increment = 0;
+ break;
+ }
+
+ /* Truncate the mantissa */
+ tmp.sigl &= 0xfffff800;
+
+ if ( increment )
+ {
+ if ( tmp.sigl >= 0xfffff800 )
+ {
+ /* the sigl part overflows */
+ if ( tmp.sigh == 0xffffffff )
+ {
+ /* The sigh part overflows */
+ tmp.sigh = 0x80000000;
+ exp++;
+ if (exp >= EXP_OVER)
+ goto overflow;
+ }
+ else
+ {
+ tmp.sigh ++;
+ }
+ tmp.sigl = 0x00000000;
+ }
+ else
+ {
+ /* We only need to increment sigl */
+ tmp.sigl += 0x00000800;
+ }
+ }
+ }
+ else
+ precision_loss = 0;
+
+ l[0] = (tmp.sigl >> 11) | (tmp.sigh << 21);
+ l[1] = ((tmp.sigh >> 11) & 0xfffff);
+
+ if ( exp > DOUBLE_Emax )
+ {
+ overflow:
+ EXCEPTION(EX_Overflow);
+ if ( !(control_word & CW_Overflow) )
+ return 0;
+ set_precision_flag_up();
+ if ( !(control_word & CW_Precision) )
+ return 0;
+
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book */
+ /* Overflow to infinity */
+ l[0] = 0x00000000; /* Set to */
+ l[1] = 0x7ff00000; /* + INF */
+ }
+ else
+ {
+ if ( precision_loss )
+ {
+ if ( increment )
+ set_precision_flag_up();
+ else
+ set_precision_flag_down();
+ }
+ /* Add the exponent */
+ l[1] |= (((exp+DOUBLE_Ebias) & 0x7ff) << 20);
+ }
+ }
+ }
+ else if (st0_tag == TAG_Zero)
+ {
+ /* Number is zero */
+ l[0] = 0;
+ l[1] = 0;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if ( st0_tag == TW_Denormal )
+ {
+ /* A denormal will always underflow. */
+#ifndef PECULIAR_486
+ /* An 80486 is supposed to be able to generate
+ a denormal exception here, but... */
+ /* Underflow has priority. */
+ if ( control_word & CW_Underflow )
+ denormal_operand();
+#endif /* PECULIAR_486 */
+ reg_copy(st0_ptr, &tmp);
+ goto denormal_arg;
+ }
+ else if (st0_tag == TW_Infinity)
+ {
+ l[0] = 0;
+ l[1] = 0x7ff00000;
+ }
+ else if (st0_tag == TW_NaN)
+ {
+ /* Is it really a NaN ? */
+ if ( (exponent(st0_ptr) == EXP_OVER)
+ && (st0_ptr->sigh & 0x80000000) )
+ {
+ /* See if we can get a valid NaN from the FPU_REG */
+ l[0] = (st0_ptr->sigl >> 11) | (st0_ptr->sigh << 21);
+ l[1] = ((st0_ptr->sigh >> 11) & 0xfffff);
+ if ( !(st0_ptr->sigh & 0x40000000) )
+ {
+ /* It is a signalling NaN */
+ EXCEPTION(EX_Invalid);
+ if ( !(control_word & CW_Invalid) )
+ return 0;
+ l[1] |= (0x40000000 >> 11);
+ }
+ l[1] |= 0x7ff00000;
+ }
+ else
+ {
+ /* It is an unsupported data type */
+ EXCEPTION(EX_Invalid);
+ if ( !(control_word & CW_Invalid) )
+ return 0;
+ l[0] = 0;
+ l[1] = 0xfff80000;
+ }
+ }
+ }
+ else if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ if ( control_word & CW_Invalid )
+ {
+ /* The masked response */
+ /* Put out the QNaN indefinite */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,dfloat,8);
+ FPU_put_user(0, (unsigned long __user *) dfloat);
+ FPU_put_user(0xfff80000, 1 + (unsigned long __user *) dfloat);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ }
+ else
+ return 0;
+ }
+ if ( getsign(st0_ptr) )
+ l[1] |= 0x80000000;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,dfloat,8);
+ FPU_put_user(l[0], (unsigned long __user *)dfloat);
+ FPU_put_user(l[1], 1 + (unsigned long __user *)dfloat);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+
+/* Put a float into user memory */
+int FPU_store_single(FPU_REG *st0_ptr, u_char st0_tag, float __user *single)
+{
+ long templ = 0;
+ unsigned long increment = 0; /* avoid gcc warnings */
+ int precision_loss;
+ int exp;
+ FPU_REG tmp;
+
+ if ( st0_tag == TAG_Valid )
+ {
+
+ reg_copy(st0_ptr, &tmp);
+ exp = exponent(&tmp);
+
+ if ( exp < SINGLE_Emin )
+ {
+ addexponent(&tmp, -SINGLE_Emin + 23); /* largest exp to be 22 */
+
+ denormal_arg:
+
+ if ( (precision_loss = FPU_round_to_int(&tmp, st0_tag)) )
+ {
+#ifdef PECULIAR_486
+ /* Did it round to a non-denormal ? */
+ /* This behaviour might be regarded as peculiar, it appears
+ that the 80486 rounds to the dest precision, then
+ converts to decide underflow. */
+ if ( !((tmp.sigl == 0x00800000) &&
+ ((st0_ptr->sigh & 0x000000ff) || st0_ptr->sigl)) )
+#endif /* PECULIAR_486 */
+ {
+ EXCEPTION(EX_Underflow);
+ /* This is a special case: see sec 16.2.5.1 of
+ the 80486 book */
+ if ( !(control_word & CW_Underflow) )
+ return 0;
+ }
+ EXCEPTION(precision_loss);
+ if ( !(control_word & CW_Precision) )
+ return 0;
+ }
+ templ = tmp.sigl;
+ }
+ else
+ {
+ if ( tmp.sigl | (tmp.sigh & 0x000000ff) )
+ {
+ unsigned long sigh = tmp.sigh;
+ unsigned long sigl = tmp.sigl;
+
+ precision_loss = 1;
+ switch (control_word & CW_RC)
+ {
+ case RC_RND:
+ increment = ((sigh & 0xff) > 0x80) /* more than half */
+ || (((sigh & 0xff) == 0x80) && sigl) /* more than half */
+ || ((sigh & 0x180) == 0x180); /* round to even */
+ break;
+ case RC_DOWN: /* towards -infinity */
+ increment = signpositive(&tmp)
+ ? 0 : (sigl | (sigh & 0xff));
+ break;
+ case RC_UP: /* towards +infinity */
+ increment = signpositive(&tmp)
+ ? (sigl | (sigh & 0xff)) : 0;
+ break;
+ case RC_CHOP:
+ increment = 0;
+ break;
+ }
+
+ /* Truncate part of the mantissa */
+ tmp.sigl = 0;
+
+ if (increment)
+ {
+ if ( sigh >= 0xffffff00 )
+ {
+ /* The sigh part overflows */
+ tmp.sigh = 0x80000000;
+ exp++;
+ if ( exp >= EXP_OVER )
+ goto overflow;
+ }
+ else
+ {
+ tmp.sigh &= 0xffffff00;
+ tmp.sigh += 0x100;
+ }
+ }
+ else
+ {
+ tmp.sigh &= 0xffffff00; /* Finish the truncation */
+ }
+ }
+ else
+ precision_loss = 0;
+
+ templ = (tmp.sigh >> 8) & 0x007fffff;
+
+ if ( exp > SINGLE_Emax )
+ {
+ overflow:
+ EXCEPTION(EX_Overflow);
+ if ( !(control_word & CW_Overflow) )
+ return 0;
+ set_precision_flag_up();
+ if ( !(control_word & CW_Precision) )
+ return 0;
+
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book. */
+ /* Masked response is overflow to infinity. */
+ templ = 0x7f800000;
+ }
+ else
+ {
+ if ( precision_loss )
+ {
+ if ( increment )
+ set_precision_flag_up();
+ else
+ set_precision_flag_down();
+ }
+ /* Add the exponent */
+ templ |= ((exp+SINGLE_Ebias) & 0xff) << 23;
+ }
+ }
+ }
+ else if (st0_tag == TAG_Zero)
+ {
+ templ = 0;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if (st0_tag == TW_Denormal)
+ {
+ reg_copy(st0_ptr, &tmp);
+
+ /* A denormal will always underflow. */
+#ifndef PECULIAR_486
+ /* An 80486 is supposed to be able to generate
+ a denormal exception here, but... */
+ /* Underflow has priority. */
+ if ( control_word & CW_Underflow )
+ denormal_operand();
+#endif /* PECULIAR_486 */
+ goto denormal_arg;
+ }
+ else if (st0_tag == TW_Infinity)
+ {
+ templ = 0x7f800000;
+ }
+ else if (st0_tag == TW_NaN)
+ {
+ /* Is it really a NaN ? */
+ if ( (exponent(st0_ptr) == EXP_OVER) && (st0_ptr->sigh & 0x80000000) )
+ {
+ /* See if we can get a valid NaN from the FPU_REG */
+ templ = st0_ptr->sigh >> 8;
+ if ( !(st0_ptr->sigh & 0x40000000) )
+ {
+ /* It is a signalling NaN */
+ EXCEPTION(EX_Invalid);
+ if ( !(control_word & CW_Invalid) )
+ return 0;
+ templ |= (0x40000000 >> 8);
+ }
+ templ |= 0x7f800000;
+ }
+ else
+ {
+ /* It is an unsupported data type */
+ EXCEPTION(EX_Invalid);
+ if ( !(control_word & CW_Invalid) )
+ return 0;
+ templ = 0xffc00000;
+ }
+ }
+#ifdef PARANOID
+ else
+ {
+ EXCEPTION(EX_INTERNAL|0x164);
+ return 0;
+ }
+#endif
+ }
+ else if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ if ( control_word & EX_Invalid )
+ {
+ /* The masked response */
+ /* Put out the QNaN indefinite */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,single,4);
+ FPU_put_user(0xffc00000, (unsigned long __user *) single);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ }
+ else
+ return 0;
+ }
+#ifdef PARANOID
+ else
+ {
+ EXCEPTION(EX_INTERNAL|0x163);
+ return 0;
+ }
+#endif
+ if ( getsign(st0_ptr) )
+ templ |= 0x80000000;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,single,4);
+ FPU_put_user(templ,(unsigned long __user *) single);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+
+/* Put a long long into user memory */
+int FPU_store_int64(FPU_REG *st0_ptr, u_char st0_tag, long long __user *d)
+{
+ FPU_REG t;
+ long long tll;
+ int precision_loss;
+
+ if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ goto invalid_operand;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if ( (st0_tag == TW_Infinity) ||
+ (st0_tag == TW_NaN) )
+ {
+ EXCEPTION(EX_Invalid);
+ goto invalid_operand;
+ }
+ }
+
+ reg_copy(st0_ptr, &t);
+ precision_loss = FPU_round_to_int(&t, st0_tag);
+ ((long *)&tll)[0] = t.sigl;
+ ((long *)&tll)[1] = t.sigh;
+ if ( (precision_loss == 1) ||
+ ((t.sigh & 0x80000000) &&
+ !((t.sigh == 0x80000000) && (t.sigl == 0) &&
+ signnegative(&t))) )
+ {
+ EXCEPTION(EX_Invalid);
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book */
+ invalid_operand:
+ if ( control_word & EX_Invalid )
+ {
+ /* Produce something like QNaN "indefinite" */
+ tll = 0x8000000000000000LL;
+ }
+ else
+ return 0;
+ }
+ else
+ {
+ if ( precision_loss )
+ set_precision_flag(precision_loss);
+ if ( signnegative(&t) )
+ tll = - tll;
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,8);
+ copy_to_user(d, &tll, 8);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+
+/* Put a long into user memory */
+int FPU_store_int32(FPU_REG *st0_ptr, u_char st0_tag, long __user *d)
+{
+ FPU_REG t;
+ int precision_loss;
+
+ if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ goto invalid_operand;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if ( (st0_tag == TW_Infinity) ||
+ (st0_tag == TW_NaN) )
+ {
+ EXCEPTION(EX_Invalid);
+ goto invalid_operand;
+ }
+ }
+
+ reg_copy(st0_ptr, &t);
+ precision_loss = FPU_round_to_int(&t, st0_tag);
+ if (t.sigh ||
+ ((t.sigl & 0x80000000) &&
+ !((t.sigl == 0x80000000) && signnegative(&t))) )
+ {
+ EXCEPTION(EX_Invalid);
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book */
+ invalid_operand:
+ if ( control_word & EX_Invalid )
+ {
+ /* Produce something like QNaN "indefinite" */
+ t.sigl = 0x80000000;
+ }
+ else
+ return 0;
+ }
+ else
+ {
+ if ( precision_loss )
+ set_precision_flag(precision_loss);
+ if ( signnegative(&t) )
+ t.sigl = -(long)t.sigl;
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,4);
+ FPU_put_user(t.sigl, (unsigned long __user *) d);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+
+/* Put a short into user memory */
+int FPU_store_int16(FPU_REG *st0_ptr, u_char st0_tag, short __user *d)
+{
+ FPU_REG t;
+ int precision_loss;
+
+ if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ goto invalid_operand;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if ( (st0_tag == TW_Infinity) ||
+ (st0_tag == TW_NaN) )
+ {
+ EXCEPTION(EX_Invalid);
+ goto invalid_operand;
+ }
+ }
+
+ reg_copy(st0_ptr, &t);
+ precision_loss = FPU_round_to_int(&t, st0_tag);
+ if (t.sigh ||
+ ((t.sigl & 0xffff8000) &&
+ !((t.sigl == 0x8000) && signnegative(&t))) )
+ {
+ EXCEPTION(EX_Invalid);
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book */
+ invalid_operand:
+ if ( control_word & EX_Invalid )
+ {
+ /* Produce something like QNaN "indefinite" */
+ t.sigl = 0x8000;
+ }
+ else
+ return 0;
+ }
+ else
+ {
+ if ( precision_loss )
+ set_precision_flag(precision_loss);
+ if ( signnegative(&t) )
+ t.sigl = -t.sigl;
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,2);
+ FPU_put_user((short)t.sigl, d);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+
+/* Put a packed bcd array into user memory */
+int FPU_store_bcd(FPU_REG *st0_ptr, u_char st0_tag, u_char __user *d)
+{
+ FPU_REG t;
+ unsigned long long ll;
+ u_char b;
+ int i, precision_loss;
+ u_char sign = (getsign(st0_ptr) == SIGN_NEG) ? 0x80 : 0;
+
+ if ( st0_tag == TAG_Empty )
+ {
+ /* Empty register (stack underflow) */
+ EXCEPTION(EX_StackUnder);
+ goto invalid_operand;
+ }
+ else if ( st0_tag == TAG_Special )
+ {
+ st0_tag = FPU_Special(st0_ptr);
+ if ( (st0_tag == TW_Infinity) ||
+ (st0_tag == TW_NaN) )
+ {
+ EXCEPTION(EX_Invalid);
+ goto invalid_operand;
+ }
+ }
+
+ reg_copy(st0_ptr, &t);
+ precision_loss = FPU_round_to_int(&t, st0_tag);
+ ll = significand(&t);
+
+ /* Check for overflow, by comparing with 999999999999999999 decimal. */
+ if ( (t.sigh > 0x0de0b6b3) ||
+ ((t.sigh == 0x0de0b6b3) && (t.sigl > 0xa763ffff)) )
+ {
+ EXCEPTION(EX_Invalid);
+ /* This is a special case: see sec 16.2.5.1 of the 80486 book */
+ invalid_operand:
+ if ( control_word & CW_Invalid )
+ {
+ /* Produce the QNaN "indefinite" */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,10);
+ for ( i = 0; i < 7; i++)
+ FPU_put_user(0, d+i); /* These bytes "undefined" */
+ FPU_put_user(0xc0, d+7); /* This byte "undefined" */
+ FPU_put_user(0xff, d+8);
+ FPU_put_user(0xff, d+9);
+ RE_ENTRANT_CHECK_ON;
+ return 1;
+ }
+ else
+ return 0;
+ }
+ else if ( precision_loss )
+ {
+ /* Precision loss doesn't stop the data transfer */
+ set_precision_flag(precision_loss);
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,10);
+ RE_ENTRANT_CHECK_ON;
+ for ( i = 0; i < 9; i++)
+ {
+ b = FPU_div_small(&ll, 10);
+ b |= (FPU_div_small(&ll, 10)) << 4;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_put_user(b, d+i);
+ RE_ENTRANT_CHECK_ON;
+ }
+ RE_ENTRANT_CHECK_OFF;
+ FPU_put_user(sign, d+9);
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}
+
+/*===========================================================================*/
+
+/* r gets mangled such that sig is int, sign:
+ it is NOT normalized */
+/* The return value (in eax) is zero if the result is exact,
+ if bits are changed due to rounding, truncation, etc, then
+ a non-zero value is returned */
+/* Overflow is signalled by a non-zero return value (in eax).
+ In the case of overflow, the returned significand always has the
+ largest possible value */
+int FPU_round_to_int(FPU_REG *r, u_char tag)
+{
+ u_char very_big;
+ unsigned eax;
+
+ if (tag == TAG_Zero)
+ {
+ /* Make sure that zero is returned */
+ significand(r) = 0;
+ return 0; /* o.k. */
+ }
+
+ if (exponent(r) > 63)
+ {
+ r->sigl = r->sigh = ~0; /* The largest representable number */
+ return 1; /* overflow */
+ }
+
+ eax = FPU_shrxs(&r->sigl, 63 - exponent(r));
+ very_big = !(~(r->sigh) | ~(r->sigl)); /* test for 0xfff...fff */
+#define half_or_more (eax & 0x80000000)
+#define frac_part (eax)
+#define more_than_half ((eax & 0x80000001) == 0x80000001)
+ switch (control_word & CW_RC)
+ {
+ case RC_RND:
+ if ( more_than_half /* nearest */
+ || (half_or_more && (r->sigl & 1)) ) /* odd -> even */
+ {
+ if ( very_big ) return 1; /* overflow */
+ significand(r) ++;
+ return PRECISION_LOST_UP;
+ }
+ break;
+ case RC_DOWN:
+ if (frac_part && getsign(r))
+ {
+ if ( very_big ) return 1; /* overflow */
+ significand(r) ++;
+ return PRECISION_LOST_UP;
+ }
+ break;
+ case RC_UP:
+ if (frac_part && !getsign(r))
+ {
+ if ( very_big ) return 1; /* overflow */
+ significand(r) ++;
+ return PRECISION_LOST_UP;
+ }
+ break;
+ case RC_CHOP:
+ break;
+ }
+
+ return eax ? PRECISION_LOST_DOWN : 0;
+
+}
+
+/*===========================================================================*/
+
+u_char __user *fldenv(fpu_addr_modes addr_modes, u_char __user *s)
+{
+ unsigned short tag_word = 0;
+ u_char tag;
+ int i;
+
+ if ( (addr_modes.default_mode == VM86) ||
+ ((addr_modes.default_mode == PM16)
+ ^ (addr_modes.override.operand_size == OP_SIZE_PREFIX)) )
+ {
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, s, 0x0e);
+ FPU_get_user(control_word, (unsigned short __user *) s);
+ FPU_get_user(partial_status, (unsigned short __user *) (s+2));
+ FPU_get_user(tag_word, (unsigned short __user *) (s+4));
+ FPU_get_user(instruction_address.offset, (unsigned short __user *) (s+6));
+ FPU_get_user(instruction_address.selector, (unsigned short __user *) (s+8));
+ FPU_get_user(operand_address.offset, (unsigned short __user *) (s+0x0a));
+ FPU_get_user(operand_address.selector, (unsigned short __user *) (s+0x0c));
+ RE_ENTRANT_CHECK_ON;
+ s += 0x0e;
+ if ( addr_modes.default_mode == VM86 )
+ {
+ instruction_address.offset
+ += (instruction_address.selector & 0xf000) << 4;
+ operand_address.offset += (operand_address.selector & 0xf000) << 4;
+ }
+ }
+ else
+ {
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, s, 0x1c);
+ FPU_get_user(control_word, (unsigned short __user *) s);
+ FPU_get_user(partial_status, (unsigned short __user *) (s+4));
+ FPU_get_user(tag_word, (unsigned short __user *) (s+8));
+ FPU_get_user(instruction_address.offset, (unsigned long __user *) (s+0x0c));
+ FPU_get_user(instruction_address.selector, (unsigned short __user *) (s+0x10));
+ FPU_get_user(instruction_address.opcode, (unsigned short __user *) (s+0x12));
+ FPU_get_user(operand_address.offset, (unsigned long __user *) (s+0x14));
+ FPU_get_user(operand_address.selector, (unsigned long __user *) (s+0x18));
+ RE_ENTRANT_CHECK_ON;
+ s += 0x1c;
+ }
+
+#ifdef PECULIAR_486
+ control_word &= ~0xe080;
+#endif /* PECULIAR_486 */
+
+ top = (partial_status >> SW_Top_Shift) & 7;
+
+ if ( partial_status & ~control_word & CW_Exceptions )
+ partial_status |= (SW_Summary | SW_Backward);
+ else
+ partial_status &= ~(SW_Summary | SW_Backward);
+
+ for ( i = 0; i < 8; i++ )
+ {
+ tag = tag_word & 3;
+ tag_word >>= 2;
+
+ if ( tag == TAG_Empty )
+ /* New tag is empty. Accept it */
+ FPU_settag(i, TAG_Empty);
+ else if ( FPU_gettag(i) == TAG_Empty )
+ {
+ /* Old tag is empty and new tag is not empty. New tag is determined
+ by old reg contents */
+ if ( exponent(&fpu_register(i)) == - EXTENDED_Ebias )
+ {
+ if ( !(fpu_register(i).sigl | fpu_register(i).sigh) )
+ FPU_settag(i, TAG_Zero);
+ else
+ FPU_settag(i, TAG_Special);
+ }
+ else if ( exponent(&fpu_register(i)) == 0x7fff - EXTENDED_Ebias )
+ {
+ FPU_settag(i, TAG_Special);
+ }
+ else if ( fpu_register(i).sigh & 0x80000000 )
+ FPU_settag(i, TAG_Valid);
+ else
+ FPU_settag(i, TAG_Special); /* An Un-normal */
+ }
+ /* Else old tag is not empty and new tag is not empty. Old tag
+ remains correct */
+ }
+
+ return s;
+}
+
+
+void frstor(fpu_addr_modes addr_modes, u_char __user *data_address)
+{
+ int i, regnr;
+ u_char __user *s = fldenv(addr_modes, data_address);
+ int offset = (top & 7) * 10, other = 80 - offset;
+
+ /* Copy all registers in stack order. */
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ,s,80);
+ __copy_from_user(register_base+offset, s, other);
+ if ( offset )
+ __copy_from_user(register_base, s+other, offset);
+ RE_ENTRANT_CHECK_ON;
+
+ for ( i = 0; i < 8; i++ )
+ {
+ regnr = (i+top) & 7;
+ if ( FPU_gettag(regnr) != TAG_Empty )
+ /* The loaded data over-rides all other cases. */
+ FPU_settag(regnr, FPU_tagof(&st(i)));
+ }
+
+}
+
+
+u_char __user *fstenv(fpu_addr_modes addr_modes, u_char __user *d)
+{
+ if ( (addr_modes.default_mode == VM86) ||
+ ((addr_modes.default_mode == PM16)
+ ^ (addr_modes.override.operand_size == OP_SIZE_PREFIX)) )
+ {
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,14);
+#ifdef PECULIAR_486
+ FPU_put_user(control_word & ~0xe080, (unsigned long __user *) d);
+#else
+ FPU_put_user(control_word, (unsigned short __user *) d);
+#endif /* PECULIAR_486 */
+ FPU_put_user(status_word(), (unsigned short __user *) (d+2));
+ FPU_put_user(fpu_tag_word, (unsigned short __user *) (d+4));
+ FPU_put_user(instruction_address.offset, (unsigned short __user *) (d+6));
+ FPU_put_user(operand_address.offset, (unsigned short __user *) (d+0x0a));
+ if ( addr_modes.default_mode == VM86 )
+ {
+ FPU_put_user((instruction_address.offset & 0xf0000) >> 4,
+ (unsigned short __user *) (d+8));
+ FPU_put_user((operand_address.offset & 0xf0000) >> 4,
+ (unsigned short __user *) (d+0x0c));
+ }
+ else
+ {
+ FPU_put_user(instruction_address.selector, (unsigned short __user *) (d+8));
+ FPU_put_user(operand_address.selector, (unsigned short __user *) (d+0x0c));
+ }
+ RE_ENTRANT_CHECK_ON;
+ d += 0x0e;
+ }
+ else
+ {
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE, d, 7*4);
+#ifdef PECULIAR_486
+ control_word &= ~0xe080;
+ /* An 80486 sets nearly all of the reserved bits to 1. */
+ control_word |= 0xffff0040;
+ partial_status = status_word() | 0xffff0000;
+ fpu_tag_word |= 0xffff0000;
+ I387.soft.fcs &= ~0xf8000000;
+ I387.soft.fos |= 0xffff0000;
+#endif /* PECULIAR_486 */
+ __copy_to_user(d, &control_word, 7*4);
+ RE_ENTRANT_CHECK_ON;
+ d += 0x1c;
+ }
+
+ control_word |= CW_Exceptions;
+ partial_status &= ~(SW_Summary | SW_Backward);
+
+ return d;
+}
+
+
+void fsave(fpu_addr_modes addr_modes, u_char __user *data_address)
+{
+ u_char __user *d;
+ int offset = (top & 7) * 10, other = 80 - offset;
+
+ d = fstenv(addr_modes, data_address);
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE,d,80);
+
+ /* Copy all registers in stack order. */
+ __copy_to_user(d, register_base+offset, other);
+ if ( offset )
+ __copy_to_user(d+other, register_base, offset);
+ RE_ENTRANT_CHECK_ON;
+
+ finit();
+}
+
+/*===========================================================================*/
diff --git a/arch/i386/math-emu/reg_mul.c b/arch/i386/math-emu/reg_mul.c
new file mode 100644
index 0000000..40f50b6
--- /dev/null
+++ b/arch/i386/math-emu/reg_mul.c
@@ -0,0 +1,132 @@
+/*---------------------------------------------------------------------------+
+ | reg_mul.c |
+ | |
+ | Multiply one FPU_REG by another, put the result in a destination FPU_REG. |
+ | |
+ | Copyright (C) 1992,1993,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | Returns the tag of the result if no exceptions or errors occurred. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | The destination may be any FPU_REG, including one of the source FPU_REGs. |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+#include "exception.h"
+#include "reg_constant.h"
+#include "fpu_system.h"
+
+
+/*
+ Multiply two registers to give a register result.
+ The sources are st(deststnr) and (b,tagb,signb).
+ The destination is st(deststnr).
+ */
+/* This routine must be called with non-empty source registers */
+int FPU_mul(FPU_REG const *b, u_char tagb, int deststnr, int control_w)
+{
+ FPU_REG *a = &st(deststnr);
+ FPU_REG *dest = a;
+ u_char taga = FPU_gettagi(deststnr);
+ u_char saved_sign = getsign(dest);
+ u_char sign = (getsign(a) ^ getsign(b));
+ int tag;
+
+
+ if ( !(taga | tagb) )
+ {
+ /* Both regs Valid, this should be the most common case. */
+
+ tag = FPU_u_mul(a, b, dest, control_w, sign, exponent(a) + exponent(b));
+ if ( tag < 0 )
+ {
+ setsign(dest, saved_sign);
+ return tag;
+ }
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+
+ if ( taga == TAG_Special )
+ taga = FPU_Special(a);
+ if ( tagb == TAG_Special )
+ tagb = FPU_Special(b);
+
+ if ( ((taga == TAG_Valid) && (tagb == TW_Denormal))
+ || ((taga == TW_Denormal) && (tagb == TAG_Valid))
+ || ((taga == TW_Denormal) && (tagb == TW_Denormal)) )
+ {
+ FPU_REG x, y;
+ if ( denormal_operand() < 0 )
+ return FPU_Exception;
+
+ FPU_to_exp16(a, &x);
+ FPU_to_exp16(b, &y);
+ tag = FPU_u_mul(&x, &y, dest, control_w, sign,
+ exponent16(&x) + exponent16(&y));
+ if ( tag < 0 )
+ {
+ setsign(dest, saved_sign);
+ return tag;
+ }
+ FPU_settagi(deststnr, tag);
+ return tag;
+ }
+ else if ( (taga <= TW_Denormal) && (tagb <= TW_Denormal) )
+ {
+ if ( ((tagb == TW_Denormal) || (taga == TW_Denormal))
+ && (denormal_operand() < 0) )
+ return FPU_Exception;
+
+ /* Must have either both arguments == zero, or
+ one valid and the other zero.
+ The result is therefore zero. */
+ FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
+ /* The 80486 book says that the answer is +0, but a real
+ 80486 behaves this way.
+ IEEE-754 apparently says it should be this way. */
+ setsign(dest, sign);
+ return TAG_Zero;
+ }
+ /* Must have infinities, NaNs, etc */
+ else if ( (taga == TW_NaN) || (tagb == TW_NaN) )
+ {
+ return real_2op_NaN(b, tagb, deststnr, &st(0));
+ }
+ else if ( ((taga == TW_Infinity) && (tagb == TAG_Zero))
+ || ((tagb == TW_Infinity) && (taga == TAG_Zero)) )
+ {
+ return arith_invalid(deststnr); /* Zero*Infinity is invalid */
+ }
+ else if ( ((taga == TW_Denormal) || (tagb == TW_Denormal))
+ && (denormal_operand() < 0) )
+ {
+ return FPU_Exception;
+ }
+ else if (taga == TW_Infinity)
+ {
+ FPU_copy_to_regi(a, TAG_Special, deststnr);
+ setsign(dest, sign);
+ return TAG_Special;
+ }
+ else if (tagb == TW_Infinity)
+ {
+ FPU_copy_to_regi(b, TAG_Special, deststnr);
+ setsign(dest, sign);
+ return TAG_Special;
+ }
+
+#ifdef PARANOID
+ else
+ {
+ EXCEPTION(EX_INTERNAL|0x102);
+ return FPU_Exception;
+ }
+#endif /* PARANOID */
+
+ return 0;
+}
diff --git a/arch/i386/math-emu/reg_norm.S b/arch/i386/math-emu/reg_norm.S
new file mode 100644
index 0000000..8b6352e
--- /dev/null
+++ b/arch/i386/math-emu/reg_norm.S
@@ -0,0 +1,147 @@
+/*---------------------------------------------------------------------------+
+ | reg_norm.S |
+ | |
+ | Copyright (C) 1992,1993,1994,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | Normalize the value in a FPU_REG. |
+ | |
+ | Call from C as: |
+ | int FPU_normalize(FPU_REG *n) |
+ | |
+ | int FPU_normalize_nuo(FPU_REG *n) |
+ | |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+
+
+.text
+ENTRY(FPU_normalize)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %ebx
+
+ movl PARAM1,%ebx
+
+ movl SIGH(%ebx),%edx
+ movl SIGL(%ebx),%eax
+
+ orl %edx,%edx /* ms bits */
+ js L_done /* Already normalized */
+ jnz L_shift_1 /* Shift left 1 - 31 bits */
+
+ orl %eax,%eax
+ jz L_zero /* The contents are zero */
+
+ movl %eax,%edx
+ xorl %eax,%eax
+ subw $32,EXP(%ebx) /* This can cause an underflow */
+
+/* We need to shift left by 1 - 31 bits */
+L_shift_1:
+ bsrl %edx,%ecx /* get the required shift in %ecx */
+ subl $31,%ecx
+ negl %ecx
+ shld %cl,%eax,%edx
+ shl %cl,%eax
+ subw %cx,EXP(%ebx) /* This can cause an underflow */
+
+ movl %edx,SIGH(%ebx)
+ movl %eax,SIGL(%ebx)
+
+L_done:
+ cmpw EXP_OVER,EXP(%ebx)
+ jge L_overflow
+
+ cmpw EXP_UNDER,EXP(%ebx)
+ jle L_underflow
+
+L_exit_valid:
+ movl TAG_Valid,%eax
+
+ /* Convert the exponent to 80x87 form. */
+ addw EXTENDED_Ebias,EXP(%ebx)
+ andw $0x7fff,EXP(%ebx)
+
+L_exit:
+ popl %ebx
+ leave
+ ret
+
+
+L_zero:
+ movw $0,EXP(%ebx)
+ movl TAG_Zero,%eax
+ jmp L_exit
+
+L_underflow:
+ /* Convert the exponent to 80x87 form. */
+ addw EXTENDED_Ebias,EXP(%ebx)
+ push %ebx
+ call arith_underflow
+ pop %ebx
+ jmp L_exit
+
+L_overflow:
+ /* Convert the exponent to 80x87 form. */
+ addw EXTENDED_Ebias,EXP(%ebx)
+ push %ebx
+ call arith_overflow
+ pop %ebx
+ jmp L_exit
+
+
+
+/* Normalise without reporting underflow or overflow */
+ENTRY(FPU_normalize_nuo)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %ebx
+
+ movl PARAM1,%ebx
+
+ movl SIGH(%ebx),%edx
+ movl SIGL(%ebx),%eax
+
+ orl %edx,%edx /* ms bits */
+ js L_exit_nuo_valid /* Already normalized */
+ jnz L_nuo_shift_1 /* Shift left 1 - 31 bits */
+
+ orl %eax,%eax
+ jz L_exit_nuo_zero /* The contents are zero */
+
+ movl %eax,%edx
+ xorl %eax,%eax
+ subw $32,EXP(%ebx) /* This can cause an underflow */
+
+/* We need to shift left by 1 - 31 bits */
+L_nuo_shift_1:
+ bsrl %edx,%ecx /* get the required shift in %ecx */
+ subl $31,%ecx
+ negl %ecx
+ shld %cl,%eax,%edx
+ shl %cl,%eax
+ subw %cx,EXP(%ebx) /* This can cause an underflow */
+
+ movl %edx,SIGH(%ebx)
+ movl %eax,SIGL(%ebx)
+
+L_exit_nuo_valid:
+ movl TAG_Valid,%eax
+
+ popl %ebx
+ leave
+ ret
+
+L_exit_nuo_zero:
+ movl TAG_Zero,%eax
+ movw EXP_UNDER,EXP(%ebx)
+
+ popl %ebx
+ leave
+ ret
diff --git a/arch/i386/math-emu/reg_round.S b/arch/i386/math-emu/reg_round.S
new file mode 100644
index 0000000..d1d4e48
--- /dev/null
+++ b/arch/i386/math-emu/reg_round.S
@@ -0,0 +1,708 @@
+ .file "reg_round.S"
+/*---------------------------------------------------------------------------+
+ | reg_round.S |
+ | |
+ | Rounding/truncation/etc for FPU basic arithmetic functions. |
+ | |
+ | Copyright (C) 1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | This code has four possible entry points. |
+ | The following must be entered by a jmp instruction: |
+ | fpu_reg_round, fpu_reg_round_sqrt, and fpu_Arith_exit. |
+ | |
+ | The FPU_round entry point is intended to be used by C code. |
+ | From C, call as: |
+ | int FPU_round(FPU_REG *arg, unsigned int extent, unsigned int control_w) |
+ | |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ | |
+ | For correct "up" and "down" rounding, the argument must have the correct |
+ | sign. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Four entry points. |
+ | |
+ | Needed by both the fpu_reg_round and fpu_reg_round_sqrt entry points: |
+ | %eax:%ebx 64 bit significand |
+ | %edx 32 bit extension of the significand |
+ | %edi pointer to an FPU_REG for the result to be stored |
+ | stack calling function must have set up a C stack frame and |
+ | pushed %esi, %edi, and %ebx |
+ | |
+ | Needed just for the fpu_reg_round_sqrt entry point: |
+ | %cx A control word in the same format as the FPU control word. |
+ | Otherwise, PARAM4 must give such a value. |
+ | |
+ | |
+ | The significand and its extension are assumed to be exact in the |
+ | following sense: |
+ | If the significand by itself is the exact result then the significand |
+ | extension (%edx) must contain 0, otherwise the significand extension |
+ | must be non-zero. |
+ | If the significand extension is non-zero then the significand is |
+ | smaller than the magnitude of the correct exact result by an amount |
+ | greater than zero and less than one ls bit of the significand. |
+ | The significand extension is only required to have three possible |
+ | non-zero values: |
+ | less than 0x80000000 <=> the significand is less than 1/2 an ls |
+ | bit smaller than the magnitude of the |
+ | true exact result. |
+ | exactly 0x80000000 <=> the significand is exactly 1/2 an ls bit |
+ | smaller than the magnitude of the true |
+ | exact result. |
+ | greater than 0x80000000 <=> the significand is more than 1/2 an ls |
+ | bit smaller than the magnitude of the |
+ | true exact result. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | The code in this module has become quite complex, but it should handle |
+ | all of the FPU flags which are set at this stage of the basic arithmetic |
+ | computations. |
+ | There are a few rare cases where the results are not set identically to |
+ | a real FPU. These require a bit more thought because at this stage the |
+ | results of the code here appear to be more consistent... |
+ | This may be changed in a future version. |
+ +---------------------------------------------------------------------------*/
+
+
+#include "fpu_emu.h"
+#include "exception.h"
+#include "control_w.h"
+
+/* Flags for FPU_bits_lost */
+#define LOST_DOWN $1
+#define LOST_UP $2
+
+/* Flags for FPU_denormal */
+#define DENORMAL $1
+#define UNMASKED_UNDERFLOW $2
+
+
+#ifndef NON_REENTRANT_FPU
+/* Make the code re-entrant by putting
+ local storage on the stack: */
+#define FPU_bits_lost (%esp)
+#define FPU_denormal 1(%esp)
+
+#else
+/* Not re-entrant, so we can gain speed by putting
+ local storage in a static area: */
+.data
+ .align 4,0
+FPU_bits_lost:
+ .byte 0
+FPU_denormal:
+ .byte 0
+#endif /* NON_REENTRANT_FPU */
+
+
+.text
+.globl fpu_reg_round
+.globl fpu_Arith_exit
+
+/* Entry point when called from C */
+ENTRY(FPU_round)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%edi
+ movl SIGH(%edi),%eax
+ movl SIGL(%edi),%ebx
+ movl PARAM2,%edx
+
+fpu_reg_round: /* Normal entry point */
+ movl PARAM4,%ecx
+
+#ifndef NON_REENTRANT_FPU
+ pushl %ebx /* adjust the stack pointer */
+#endif /* NON_REENTRANT_FPU */
+
+#ifdef PARANOID
+/* Cannot use this here yet */
+/* orl %eax,%eax */
+/* jns L_entry_bugged */
+#endif /* PARANOID */
+
+ cmpw EXP_UNDER,EXP(%edi)
+ jle L_Make_denorm /* The number is a de-normal */
+
+ movb $0,FPU_denormal /* 0 -> not a de-normal */
+
+Denorm_done:
+ movb $0,FPU_bits_lost /* No bits yet lost in rounding */
+
+ movl %ecx,%esi
+ andl CW_PC,%ecx
+ cmpl PR_64_BITS,%ecx
+ je LRound_To_64
+
+ cmpl PR_53_BITS,%ecx
+ je LRound_To_53
+
+ cmpl PR_24_BITS,%ecx
+ je LRound_To_24
+
+#ifdef PECULIAR_486
+/* With the precision control bits set to 01 "(reserved)", a real 80486
+ behaves as if the precision control bits were set to 11 "64 bits" */
+ cmpl PR_RESERVED_BITS,%ecx
+ je LRound_To_64
+#ifdef PARANOID
+ jmp L_bugged_denorm_486
+#endif /* PARANOID */
+#else
+#ifdef PARANOID
+ jmp L_bugged_denorm /* There is no bug, just a bad control word */
+#endif /* PARANOID */
+#endif /* PECULIAR_486 */
+
+
+/* Round etc to 24 bit precision */
+LRound_To_24:
+ movl %esi,%ecx
+ andl CW_RC,%ecx
+ cmpl RC_RND,%ecx
+ je LRound_nearest_24
+
+ cmpl RC_CHOP,%ecx
+ je LCheck_truncate_24
+
+ cmpl RC_UP,%ecx /* Towards +infinity */
+ je LUp_24
+
+ cmpl RC_DOWN,%ecx /* Towards -infinity */
+ je LDown_24
+
+#ifdef PARANOID
+ jmp L_bugged_round24
+#endif /* PARANOID */
+
+LUp_24:
+ cmpb SIGN_POS,PARAM5
+ jne LCheck_truncate_24 /* If negative then up==truncate */
+
+ jmp LCheck_24_round_up
+
+LDown_24:
+ cmpb SIGN_POS,PARAM5
+ je LCheck_truncate_24 /* If positive then down==truncate */
+
+LCheck_24_round_up:
+ movl %eax,%ecx
+ andl $0x000000ff,%ecx
+ orl %ebx,%ecx
+ orl %edx,%ecx
+ jnz LDo_24_round_up
+ jmp L_Re_normalise
+
+LRound_nearest_24:
+ /* Do rounding of the 24th bit if needed (nearest or even) */
+ movl %eax,%ecx
+ andl $0x000000ff,%ecx
+ cmpl $0x00000080,%ecx
+ jc LCheck_truncate_24 /* less than half, no increment needed */
+
+ jne LGreater_Half_24 /* greater than half, increment needed */
+
+ /* Possibly half, we need to check the ls bits */
+ orl %ebx,%ebx
+ jnz LGreater_Half_24 /* greater than half, increment needed */
+
+ orl %edx,%edx
+ jnz LGreater_Half_24 /* greater than half, increment needed */
+
+ /* Exactly half, increment only if 24th bit is 1 (round to even) */
+ testl $0x00000100,%eax
+ jz LDo_truncate_24
+
+LGreater_Half_24: /* Rounding: increment at the 24th bit */
+LDo_24_round_up:
+ andl $0xffffff00,%eax /* Truncate to 24 bits */
+ xorl %ebx,%ebx
+ movb LOST_UP,FPU_bits_lost
+ addl $0x00000100,%eax
+ jmp LCheck_Round_Overflow
+
+LCheck_truncate_24:
+ movl %eax,%ecx
+ andl $0x000000ff,%ecx
+ orl %ebx,%ecx
+ orl %edx,%ecx
+ jz L_Re_normalise /* No truncation needed */
+
+LDo_truncate_24:
+ andl $0xffffff00,%eax /* Truncate to 24 bits */
+ xorl %ebx,%ebx
+ movb LOST_DOWN,FPU_bits_lost
+ jmp L_Re_normalise
+
+
+/* Round etc to 53 bit precision */
+LRound_To_53:
+ movl %esi,%ecx
+ andl CW_RC,%ecx
+ cmpl RC_RND,%ecx
+ je LRound_nearest_53
+
+ cmpl RC_CHOP,%ecx
+ je LCheck_truncate_53
+
+ cmpl RC_UP,%ecx /* Towards +infinity */
+ je LUp_53
+
+ cmpl RC_DOWN,%ecx /* Towards -infinity */
+ je LDown_53
+
+#ifdef PARANOID
+ jmp L_bugged_round53
+#endif /* PARANOID */
+
+LUp_53:
+ cmpb SIGN_POS,PARAM5
+ jne LCheck_truncate_53 /* If negative then up==truncate */
+
+ jmp LCheck_53_round_up
+
+LDown_53:
+ cmpb SIGN_POS,PARAM5
+ je LCheck_truncate_53 /* If positive then down==truncate */
+
+LCheck_53_round_up:
+ movl %ebx,%ecx
+ andl $0x000007ff,%ecx
+ orl %edx,%ecx
+ jnz LDo_53_round_up
+ jmp L_Re_normalise
+
+LRound_nearest_53:
+ /* Do rounding of the 53rd bit if needed (nearest or even) */
+ movl %ebx,%ecx
+ andl $0x000007ff,%ecx
+ cmpl $0x00000400,%ecx
+ jc LCheck_truncate_53 /* less than half, no increment needed */
+
+ jnz LGreater_Half_53 /* greater than half, increment needed */
+
+ /* Possibly half, we need to check the ls bits */
+ orl %edx,%edx
+ jnz LGreater_Half_53 /* greater than half, increment needed */
+
+ /* Exactly half, increment only if 53rd bit is 1 (round to even) */
+ testl $0x00000800,%ebx
+ jz LTruncate_53
+
+LGreater_Half_53: /* Rounding: increment at the 53rd bit */
+LDo_53_round_up:
+ movb LOST_UP,FPU_bits_lost
+ andl $0xfffff800,%ebx /* Truncate to 53 bits */
+ addl $0x00000800,%ebx
+ adcl $0,%eax
+ jmp LCheck_Round_Overflow
+
+LCheck_truncate_53:
+ movl %ebx,%ecx
+ andl $0x000007ff,%ecx
+ orl %edx,%ecx
+ jz L_Re_normalise
+
+LTruncate_53:
+ movb LOST_DOWN,FPU_bits_lost
+ andl $0xfffff800,%ebx /* Truncate to 53 bits */
+ jmp L_Re_normalise
+
+
+/* Round etc to 64 bit precision */
+LRound_To_64:
+ movl %esi,%ecx
+ andl CW_RC,%ecx
+ cmpl RC_RND,%ecx
+ je LRound_nearest_64
+
+ cmpl RC_CHOP,%ecx
+ je LCheck_truncate_64
+
+ cmpl RC_UP,%ecx /* Towards +infinity */
+ je LUp_64
+
+ cmpl RC_DOWN,%ecx /* Towards -infinity */
+ je LDown_64
+
+#ifdef PARANOID
+ jmp L_bugged_round64
+#endif /* PARANOID */
+
+LUp_64:
+ cmpb SIGN_POS,PARAM5
+ jne LCheck_truncate_64 /* If negative then up==truncate */
+
+ orl %edx,%edx
+ jnz LDo_64_round_up
+ jmp L_Re_normalise
+
+LDown_64:
+ cmpb SIGN_POS,PARAM5
+ je LCheck_truncate_64 /* If positive then down==truncate */
+
+ orl %edx,%edx
+ jnz LDo_64_round_up
+ jmp L_Re_normalise
+
+LRound_nearest_64:
+ cmpl $0x80000000,%edx
+ jc LCheck_truncate_64
+
+ jne LDo_64_round_up
+
+ /* Now test for round-to-even */
+ testb $1,%bl
+ jz LCheck_truncate_64
+
+LDo_64_round_up:
+ movb LOST_UP,FPU_bits_lost
+ addl $1,%ebx
+ adcl $0,%eax
+
+LCheck_Round_Overflow:
+ jnc L_Re_normalise
+
+ /* Overflow, adjust the result (significand to 1.0) */
+ rcrl $1,%eax
+ rcrl $1,%ebx
+ incw EXP(%edi)
+ jmp L_Re_normalise
+
+LCheck_truncate_64:
+ orl %edx,%edx
+ jz L_Re_normalise
+
+LTruncate_64:
+ movb LOST_DOWN,FPU_bits_lost
+
+L_Re_normalise:
+ testb $0xff,FPU_denormal
+ jnz Normalise_result
+
+L_Normalised:
+ movl TAG_Valid,%edx
+
+L_deNormalised:
+ cmpb LOST_UP,FPU_bits_lost
+ je L_precision_lost_up
+
+ cmpb LOST_DOWN,FPU_bits_lost
+ je L_precision_lost_down
+
+L_no_precision_loss:
+ /* store the result */
+
+L_Store_significand:
+ movl %eax,SIGH(%edi)
+ movl %ebx,SIGL(%edi)
+
+ cmpw EXP_OVER,EXP(%edi)
+ jge L_overflow
+
+ movl %edx,%eax
+
+ /* Convert the exponent to 80x87 form. */
+ addw EXTENDED_Ebias,EXP(%edi)
+ andw $0x7fff,EXP(%edi)
+
+fpu_reg_round_signed_special_exit:
+
+ cmpb SIGN_POS,PARAM5
+ je fpu_reg_round_special_exit
+
+ orw $0x8000,EXP(%edi) /* Negative sign for the result. */
+
+fpu_reg_round_special_exit:
+
+#ifndef NON_REENTRANT_FPU
+ popl %ebx /* adjust the stack pointer */
+#endif /* NON_REENTRANT_FPU */
+
+fpu_Arith_exit:
+ popl %ebx
+ popl %edi
+ popl %esi
+ leave
+ ret
+
+
+/*
+ * Set the FPU status flags to represent precision loss due to
+ * round-up.
+ */
+L_precision_lost_up:
+ push %edx
+ push %eax
+ call set_precision_flag_up
+ popl %eax
+ popl %edx
+ jmp L_no_precision_loss
+
+/*
+ * Set the FPU status flags to represent precision loss due to
+ * truncation.
+ */
+L_precision_lost_down:
+ push %edx
+ push %eax
+ call set_precision_flag_down
+ popl %eax
+ popl %edx
+ jmp L_no_precision_loss
+
+
+/*
+ * The number is a denormal (which might get rounded up to a normal)
+ * Shift the number right the required number of bits, which will
+ * have to be undone later...
+ */
+L_Make_denorm:
+ /* The action to be taken depends upon whether the underflow
+ exception is masked */
+ testb CW_Underflow,%cl /* Underflow mask. */
+ jz Unmasked_underflow /* Do not make a denormal. */
+
+ movb DENORMAL,FPU_denormal
+
+ pushl %ecx /* Save */
+ movw EXP_UNDER+1,%cx
+ subw EXP(%edi),%cx
+
+ cmpw $64,%cx /* shrd only works for 0..31 bits */
+ jnc Denorm_shift_more_than_63
+
+ cmpw $32,%cx /* shrd only works for 0..31 bits */
+ jnc Denorm_shift_more_than_32
+
+/*
+ * We got here without jumps by assuming that the most common requirement
+ * is for a small de-normalising shift.
+ * Shift by [1..31] bits
+ */
+ addw %cx,EXP(%edi)
+ orl %edx,%edx /* extension */
+ setne %ch /* Save whether %edx is non-zero */
+ xorl %edx,%edx
+ shrd %cl,%ebx,%edx
+ shrd %cl,%eax,%ebx
+ shr %cl,%eax
+ orb %ch,%dl
+ popl %ecx
+ jmp Denorm_done
+
+/* Shift by [32..63] bits */
+Denorm_shift_more_than_32:
+ addw %cx,EXP(%edi)
+ subb $32,%cl
+ orl %edx,%edx
+ setne %ch
+ orb %ch,%bl
+ xorl %edx,%edx
+ shrd %cl,%ebx,%edx
+ shrd %cl,%eax,%ebx
+ shr %cl,%eax
+ orl %edx,%edx /* test these 32 bits */
+ setne %cl
+ orb %ch,%bl
+ orb %cl,%bl
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ popl %ecx
+ jmp Denorm_done
+
+/* Shift by [64..) bits */
+Denorm_shift_more_than_63:
+ cmpw $64,%cx
+ jne Denorm_shift_more_than_64
+
+/* Exactly 64 bit shift */
+ addw %cx,EXP(%edi)
+ xorl %ecx,%ecx
+ orl %edx,%edx
+ setne %cl
+ orl %ebx,%ebx
+ setne %ch
+ orb %ch,%cl
+ orb %cl,%al
+ movl %eax,%edx
+ xorl %eax,%eax
+ xorl %ebx,%ebx
+ popl %ecx
+ jmp Denorm_done
+
+Denorm_shift_more_than_64:
+ movw EXP_UNDER+1,EXP(%edi)
+/* This is easy, %eax must be non-zero, so.. */
+ movl $1,%edx
+ xorl %eax,%eax
+ xorl %ebx,%ebx
+ popl %ecx
+ jmp Denorm_done
+
+
+Unmasked_underflow:
+ movb UNMASKED_UNDERFLOW,FPU_denormal
+ jmp Denorm_done
+
+
+/* Undo the de-normalisation. */
+Normalise_result:
+ cmpb UNMASKED_UNDERFLOW,FPU_denormal
+ je Signal_underflow
+
+/* The number must be a denormal if we got here. */
+#ifdef PARANOID
+ /* But check it... just in case. */
+ cmpw EXP_UNDER+1,EXP(%edi)
+ jne L_norm_bugged
+#endif /* PARANOID */
+
+#ifdef PECULIAR_486
+ /*
+ * This implements a special feature of 80486 behaviour.
+ * Underflow will be signalled even if the number is
+ * not a denormal after rounding.
+ * This difference occurs only for masked underflow, and not
+ * in the unmasked case.
+ * Actual 80486 behaviour differs from this in some circumstances.
+ */
+ orl %eax,%eax /* ms bits */
+ js LPseudoDenormal /* Will be masked underflow */
+#else
+ orl %eax,%eax /* ms bits */
+ js L_Normalised /* No longer a denormal */
+#endif /* PECULIAR_486 */
+
+ jnz LDenormal_adj_exponent
+
+ orl %ebx,%ebx
+ jz L_underflow_to_zero /* The contents are zero */
+
+LDenormal_adj_exponent:
+ decw EXP(%edi)
+
+LPseudoDenormal:
+ testb $0xff,FPU_bits_lost /* bits lost == underflow */
+ movl TAG_Special,%edx
+ jz L_deNormalised
+
+ /* There must be a masked underflow */
+ push %eax
+ pushl EX_Underflow
+ call EXCEPTION
+ popl %eax
+ popl %eax
+ movl TAG_Special,%edx
+ jmp L_deNormalised
+
+
+/*
+ * The operations resulted in a number too small to represent.
+ * Masked response.
+ */
+L_underflow_to_zero:
+ push %eax
+ call set_precision_flag_down
+ popl %eax
+
+ push %eax
+ pushl EX_Underflow
+ call EXCEPTION
+ popl %eax
+ popl %eax
+
+/* Reduce the exponent to EXP_UNDER */
+ movw EXP_UNDER,EXP(%edi)
+ movl TAG_Zero,%edx
+ jmp L_Store_significand
+
+
+/* The operations resulted in a number too large to represent. */
+L_overflow:
+ addw EXTENDED_Ebias,EXP(%edi) /* Set for unmasked response. */
+ push %edi
+ call arith_overflow
+ pop %edi
+ jmp fpu_reg_round_signed_special_exit
+
+
+Signal_underflow:
+ /* The number may have been changed to a non-denormal */
+ /* by the rounding operations. */
+ cmpw EXP_UNDER,EXP(%edi)
+ jle Do_unmasked_underflow
+
+ jmp L_Normalised
+
+Do_unmasked_underflow:
+ /* Increase the exponent by the magic number */
+ addw $(3*(1<<13)),EXP(%edi)
+ push %eax
+ pushl EX_Underflow
+ call EXCEPTION
+ popl %eax
+ popl %eax
+ jmp L_Normalised
+
+
+#ifdef PARANOID
+#ifdef PECULIAR_486
+L_bugged_denorm_486:
+ pushl EX_INTERNAL|0x236
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+#else
+L_bugged_denorm:
+ pushl EX_INTERNAL|0x230
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+#endif /* PECULIAR_486 */
+
+L_bugged_round24:
+ pushl EX_INTERNAL|0x231
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+
+L_bugged_round53:
+ pushl EX_INTERNAL|0x232
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+
+L_bugged_round64:
+ pushl EX_INTERNAL|0x233
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+
+L_norm_bugged:
+ pushl EX_INTERNAL|0x234
+ call EXCEPTION
+ popl %ebx
+ jmp L_exception_exit
+
+L_entry_bugged:
+ pushl EX_INTERNAL|0x235
+ call EXCEPTION
+ popl %ebx
+L_exception_exit:
+ mov $-1,%eax
+ jmp fpu_reg_round_special_exit
+#endif /* PARANOID */
diff --git a/arch/i386/math-emu/reg_u_add.S b/arch/i386/math-emu/reg_u_add.S
new file mode 100644
index 0000000..47c4c24
--- /dev/null
+++ b/arch/i386/math-emu/reg_u_add.S
@@ -0,0 +1,167 @@
+ .file "reg_u_add.S"
+/*---------------------------------------------------------------------------+
+ | reg_u_add.S |
+ | |
+ | Add two valid (TAG_Valid) FPU_REG numbers, of the same sign, and put the |
+ | result in a destination FPU_REG. |
+ | |
+ | Copyright (C) 1992,1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | Call from C as: |
+ | int FPU_u_add(FPU_REG *arg1, FPU_REG *arg2, FPU_REG *answ, |
+ | int control_w) |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*
+ | Kernel addition routine FPU_u_add(reg *arg1, reg *arg2, reg *answ).
+ | Takes two valid reg f.p. numbers (TAG_Valid), which are
+ | treated as unsigned numbers,
+ | and returns their sum as a TAG_Valid or TAG_Special f.p. number.
+ | The returned number is normalized.
+ | Basic checks are performed if PARANOID is defined.
+ */
+
+#include "exception.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+
+.text
+ENTRY(FPU_u_add)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%esi /* source 1 */
+ movl PARAM2,%edi /* source 2 */
+
+ movl PARAM6,%ecx
+ movl %ecx,%edx
+ subl PARAM7,%ecx /* exp1 - exp2 */
+ jge L_arg1_larger
+
+ /* num1 is smaller */
+ movl SIGL(%esi),%ebx
+ movl SIGH(%esi),%eax
+
+ movl %edi,%esi
+ movl PARAM7,%edx
+ negw %cx
+ jmp L_accum_loaded
+
+L_arg1_larger:
+ /* num1 has larger or equal exponent */
+ movl SIGL(%edi),%ebx
+ movl SIGH(%edi),%eax
+
+L_accum_loaded:
+ movl PARAM3,%edi /* destination */
+ movw %dx,EXP(%edi) /* Copy exponent to destination */
+
+ xorl %edx,%edx /* clear the extension */
+
+#ifdef PARANOID
+ testl $0x80000000,%eax
+ je L_bugged
+
+ testl $0x80000000,SIGH(%esi)
+ je L_bugged
+#endif /* PARANOID */
+
+/* The number to be shifted is in %eax:%ebx:%edx */
+ cmpw $32,%cx /* shrd only works for 0..31 bits */
+ jnc L_more_than_31
+
+/* less than 32 bits */
+ shrd %cl,%ebx,%edx
+ shrd %cl,%eax,%ebx
+ shr %cl,%eax
+ jmp L_shift_done
+
+L_more_than_31:
+ cmpw $64,%cx
+ jnc L_more_than_63
+
+ subb $32,%cl
+ jz L_exactly_32
+
+ shrd %cl,%eax,%edx
+ shr %cl,%eax
+ orl %ebx,%ebx
+ jz L_more_31_no_low /* none of the lowest bits is set */
+
+ orl $1,%edx /* record the fact in the extension */
+
+L_more_31_no_low:
+ movl %eax,%ebx
+ xorl %eax,%eax
+ jmp L_shift_done
+
+L_exactly_32:
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ jmp L_shift_done
+
+L_more_than_63:
+ cmpw $65,%cx
+ jnc L_more_than_64
+
+ movl %eax,%edx
+ orl %ebx,%ebx
+ jz L_more_63_no_low
+
+ orl $1,%edx
+ jmp L_more_63_no_low
+
+L_more_than_64:
+ movl $1,%edx /* The shifted nr always at least one '1' */
+
+L_more_63_no_low:
+ xorl %ebx,%ebx
+ xorl %eax,%eax
+
+L_shift_done:
+ /* Now do the addition */
+ addl SIGL(%esi),%ebx
+ adcl SIGH(%esi),%eax
+ jnc L_round_the_result
+
+ /* Overflow, adjust the result */
+ rcrl $1,%eax
+ rcrl $1,%ebx
+ rcrl $1,%edx
+ jnc L_no_bit_lost
+
+ orl $1,%edx
+
+L_no_bit_lost:
+ incw EXP(%edi)
+
+L_round_the_result:
+ jmp fpu_reg_round /* Round the result */
+
+
+
+#ifdef PARANOID
+/* If we ever get here then we have problems! */
+L_bugged:
+ pushl EX_INTERNAL|0x201
+ call EXCEPTION
+ pop %ebx
+ movl $-1,%eax
+ jmp L_exit
+
+L_exit:
+ popl %ebx
+ popl %edi
+ popl %esi
+ leave
+ ret
+#endif /* PARANOID */
diff --git a/arch/i386/math-emu/reg_u_div.S b/arch/i386/math-emu/reg_u_div.S
new file mode 100644
index 0000000..cc00654
--- /dev/null
+++ b/arch/i386/math-emu/reg_u_div.S
@@ -0,0 +1,471 @@
+ .file "reg_u_div.S"
+/*---------------------------------------------------------------------------+
+ | reg_u_div.S |
+ | |
+ | Divide one FPU_REG by another and put the result in a destination FPU_REG.|
+ | |
+ | Copyright (C) 1992,1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Call from C as: |
+ | int FPU_u_div(FPU_REG *a, FPU_REG *b, FPU_REG *dest, |
+ | unsigned int control_word, char *sign) |
+ | |
+ | Does not compute the destination exponent, but does adjust it. |
+ | |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+
+
+/* #define dSIGL(x) (x) */
+/* #define dSIGH(x) 4(x) */
+
+
+#ifndef NON_REENTRANT_FPU
+/*
+ Local storage on the stack:
+ Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
+ Overflow flag: ovfl_flag
+ */
+#define FPU_accum_3 -4(%ebp)
+#define FPU_accum_2 -8(%ebp)
+#define FPU_accum_1 -12(%ebp)
+#define FPU_accum_0 -16(%ebp)
+#define FPU_result_1 -20(%ebp)
+#define FPU_result_2 -24(%ebp)
+#define FPU_ovfl_flag -28(%ebp)
+
+#else
+.data
+/*
+ Local storage in a static area:
+ Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
+ Overflow flag: ovfl_flag
+ */
+ .align 4,0
+FPU_accum_3:
+ .long 0
+FPU_accum_2:
+ .long 0
+FPU_accum_1:
+ .long 0
+FPU_accum_0:
+ .long 0
+FPU_result_1:
+ .long 0
+FPU_result_2:
+ .long 0
+FPU_ovfl_flag:
+ .byte 0
+#endif /* NON_REENTRANT_FPU */
+
+#define REGA PARAM1
+#define REGB PARAM2
+#define DEST PARAM3
+
+.text
+ENTRY(FPU_u_div)
+ pushl %ebp
+ movl %esp,%ebp
+#ifndef NON_REENTRANT_FPU
+ subl $28,%esp
+#endif /* NON_REENTRANT_FPU */
+
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl REGA,%esi
+ movl REGB,%ebx
+ movl DEST,%edi
+
+ movswl EXP(%esi),%edx
+ movswl EXP(%ebx),%eax
+ subl %eax,%edx
+ addl EXP_BIAS,%edx
+
+ /* A denormal and a large number can cause an exponent underflow */
+ cmpl EXP_WAY_UNDER,%edx
+ jg xExp_not_underflow
+
+ /* Set to a really low value allow correct handling */
+ movl EXP_WAY_UNDER,%edx
+
+xExp_not_underflow:
+
+ movw %dx,EXP(%edi)
+
+#ifdef PARANOID
+/* testl $0x80000000, SIGH(%esi) // Dividend */
+/* je L_bugged */
+ testl $0x80000000, SIGH(%ebx) /* Divisor */
+ je L_bugged
+#endif /* PARANOID */
+
+/* Check if the divisor can be treated as having just 32 bits */
+ cmpl $0,SIGL(%ebx)
+ jnz L_Full_Division /* Can't do a quick divide */
+
+/* We should be able to zip through the division here */
+ movl SIGH(%ebx),%ecx /* The divisor */
+ movl SIGH(%esi),%edx /* Dividend */
+ movl SIGL(%esi),%eax /* Dividend */
+
+ cmpl %ecx,%edx
+ setaeb FPU_ovfl_flag /* Keep a record */
+ jb L_no_adjust
+
+ subl %ecx,%edx /* Prevent the overflow */
+
+L_no_adjust:
+ /* Divide the 64 bit number by the 32 bit denominator */
+ divl %ecx
+ movl %eax,FPU_result_2
+
+ /* Work on the remainder of the first division */
+ xorl %eax,%eax
+ divl %ecx
+ movl %eax,FPU_result_1
+
+ /* Work on the remainder of the 64 bit division */
+ xorl %eax,%eax
+ divl %ecx
+
+ testb $255,FPU_ovfl_flag /* was the num > denom ? */
+ je L_no_overflow
+
+ /* Do the shifting here */
+ /* increase the exponent */
+ incw EXP(%edi)
+
+ /* shift the mantissa right one bit */
+ stc /* To set the ms bit */
+ rcrl FPU_result_2
+ rcrl FPU_result_1
+ rcrl %eax
+
+L_no_overflow:
+ jmp LRound_precision /* Do the rounding as required */
+
+
+/*---------------------------------------------------------------------------+
+ | Divide: Return arg1/arg2 to arg3. |
+ | |
+ | This routine does not use the exponents of arg1 and arg2, but does |
+ | adjust the exponent of arg3. |
+ | |
+ | The maximum returned value is (ignoring exponents) |
+ | .ffffffff ffffffff |
+ | ------------------ = 1.ffffffff fffffffe |
+ | .80000000 00000000 |
+ | and the minimum is |
+ | .80000000 00000000 |
+ | ------------------ = .80000000 00000001 (rounded) |
+ | .ffffffff ffffffff |
+ | |
+ +---------------------------------------------------------------------------*/
+
+
+L_Full_Division:
+ /* Save extended dividend in local register */
+ movl SIGL(%esi),%eax
+ movl %eax,FPU_accum_2
+ movl SIGH(%esi),%eax
+ movl %eax,FPU_accum_3
+ xorl %eax,%eax
+ movl %eax,FPU_accum_1 /* zero the extension */
+ movl %eax,FPU_accum_0 /* zero the extension */
+
+ movl SIGL(%esi),%eax /* Get the current num */
+ movl SIGH(%esi),%edx
+
+/*----------------------------------------------------------------------*/
+/* Initialization done.
+ Do the first 32 bits. */
+
+ movb $0,FPU_ovfl_flag
+ cmpl SIGH(%ebx),%edx /* Test for imminent overflow */
+ jb LLess_than_1
+ ja LGreater_than_1
+
+ cmpl SIGL(%ebx),%eax
+ jb LLess_than_1
+
+LGreater_than_1:
+/* The dividend is greater or equal, would cause overflow */
+ setaeb FPU_ovfl_flag /* Keep a record */
+
+ subl SIGL(%ebx),%eax
+ sbbl SIGH(%ebx),%edx /* Prevent the overflow */
+ movl %eax,FPU_accum_2
+ movl %edx,FPU_accum_3
+
+LLess_than_1:
+/* At this point, we have a dividend < divisor, with a record of
+ adjustment in FPU_ovfl_flag */
+
+ /* We will divide by a number which is too large */
+ movl SIGH(%ebx),%ecx
+ addl $1,%ecx
+ jnc LFirst_div_not_1
+
+ /* here we need to divide by 100000000h,
+ i.e., no division at all.. */
+ mov %edx,%eax
+ jmp LFirst_div_done
+
+LFirst_div_not_1:
+ divl %ecx /* Divide the numerator by the augmented
+ denom ms dw */
+
+LFirst_div_done:
+ movl %eax,FPU_result_2 /* Put the result in the answer */
+
+ mull SIGH(%ebx) /* mul by the ms dw of the denom */
+
+ subl %eax,FPU_accum_2 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_3
+
+ movl FPU_result_2,%eax /* Get the result back */
+ mull SIGL(%ebx) /* now mul the ls dw of the denom */
+
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+ sbbl $0,FPU_accum_3
+ je LDo_2nd_32_bits /* Must check for non-zero result here */
+
+#ifdef PARANOID
+ jb L_bugged_1
+#endif /* PARANOID */
+
+ /* need to subtract another once of the denom */
+ incl FPU_result_2 /* Correct the answer */
+
+ movl SIGL(%ebx),%eax
+ movl SIGH(%ebx),%edx
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+
+#ifdef PARANOID
+ sbbl $0,FPU_accum_3
+ jne L_bugged_1 /* Must check for non-zero result here */
+#endif /* PARANOID */
+
+/*----------------------------------------------------------------------*/
+/* Half of the main problem is done, there is just a reduced numerator
+ to handle now.
+ Work with the second 32 bits, FPU_accum_0 not used from now on */
+LDo_2nd_32_bits:
+ movl FPU_accum_2,%edx /* get the reduced num */
+ movl FPU_accum_1,%eax
+
+ /* need to check for possible subsequent overflow */
+ cmpl SIGH(%ebx),%edx
+ jb LDo_2nd_div
+ ja LPrevent_2nd_overflow
+
+ cmpl SIGL(%ebx),%eax
+ jb LDo_2nd_div
+
+LPrevent_2nd_overflow:
+/* The numerator is greater or equal, would cause overflow */
+ /* prevent overflow */
+ subl SIGL(%ebx),%eax
+ sbbl SIGH(%ebx),%edx
+ movl %edx,FPU_accum_2
+ movl %eax,FPU_accum_1
+
+ incl FPU_result_2 /* Reflect the subtraction in the answer */
+
+#ifdef PARANOID
+ je L_bugged_2 /* Can't bump the result to 1.0 */
+#endif /* PARANOID */
+
+LDo_2nd_div:
+ cmpl $0,%ecx /* augmented denom msw */
+ jnz LSecond_div_not_1
+
+ /* %ecx == 0, we are dividing by 1.0 */
+ mov %edx,%eax
+ jmp LSecond_div_done
+
+LSecond_div_not_1:
+ divl %ecx /* Divide the numerator by the denom ms dw */
+
+LSecond_div_done:
+ movl %eax,FPU_result_1 /* Put the result in the answer */
+
+ mull SIGH(%ebx) /* mul by the ms dw of the denom */
+
+ subl %eax,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+#endif /* PARANOID */
+
+ movl FPU_result_1,%eax /* Get the result back */
+ mull SIGL(%ebx) /* now mul the ls dw of the denom */
+
+ subl %eax,FPU_accum_0 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_1 /* Subtract from the num local reg */
+ sbbl $0,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+#endif /* PARANOID */
+
+ jz LDo_3rd_32_bits
+
+#ifdef PARANOID
+ cmpl $1,FPU_accum_2
+ jne L_bugged_2
+#endif /* PARANOID */
+
+ /* need to subtract another once of the denom */
+ movl SIGL(%ebx),%eax
+ movl SIGH(%ebx),%edx
+ subl %eax,FPU_accum_0 /* Subtract from the num local reg */
+ sbbl %edx,FPU_accum_1
+ sbbl $0,FPU_accum_2
+
+#ifdef PARANOID
+ jc L_bugged_2
+ jne L_bugged_2
+#endif /* PARANOID */
+
+ addl $1,FPU_result_1 /* Correct the answer */
+ adcl $0,FPU_result_2
+
+#ifdef PARANOID
+ jc L_bugged_2 /* Must check for non-zero result here */
+#endif /* PARANOID */
+
+/*----------------------------------------------------------------------*/
+/* The division is essentially finished here, we just need to perform
+ tidying operations.
+ Deal with the 3rd 32 bits */
+LDo_3rd_32_bits:
+ movl FPU_accum_1,%edx /* get the reduced num */
+ movl FPU_accum_0,%eax
+
+ /* need to check for possible subsequent overflow */
+ cmpl SIGH(%ebx),%edx /* denom */
+ jb LRound_prep
+ ja LPrevent_3rd_overflow
+
+ cmpl SIGL(%ebx),%eax /* denom */
+ jb LRound_prep
+
+LPrevent_3rd_overflow:
+ /* prevent overflow */
+ subl SIGL(%ebx),%eax
+ sbbl SIGH(%ebx),%edx
+ movl %edx,FPU_accum_1
+ movl %eax,FPU_accum_0
+
+ addl $1,FPU_result_1 /* Reflect the subtraction in the answer */
+ adcl $0,FPU_result_2
+ jne LRound_prep
+ jnc LRound_prep
+
+ /* This is a tricky spot, there is an overflow of the answer */
+ movb $255,FPU_ovfl_flag /* Overflow -> 1.000 */
+
+LRound_prep:
+/*
+ * Prepare for rounding.
+ * To test for rounding, we just need to compare 2*accum with the
+ * denom.
+ */
+ movl FPU_accum_0,%ecx
+ movl FPU_accum_1,%edx
+ movl %ecx,%eax
+ orl %edx,%eax
+ jz LRound_ovfl /* The accumulator contains zero. */
+
+ /* Multiply by 2 */
+ clc
+ rcll $1,%ecx
+ rcll $1,%edx
+ jc LRound_large /* No need to compare, denom smaller */
+
+ subl SIGL(%ebx),%ecx
+ sbbl SIGH(%ebx),%edx
+ jnc LRound_not_small
+
+ movl $0x70000000,%eax /* Denom was larger */
+ jmp LRound_ovfl
+
+LRound_not_small:
+ jnz LRound_large
+
+ movl $0x80000000,%eax /* Remainder was exactly 1/2 denom */
+ jmp LRound_ovfl
+
+LRound_large:
+ movl $0xff000000,%eax /* Denom was smaller */
+
+LRound_ovfl:
+/* We are now ready to deal with rounding, but first we must get
+ the bits properly aligned */
+ testb $255,FPU_ovfl_flag /* was the num > denom ? */
+ je LRound_precision
+
+ incw EXP(%edi)
+
+ /* shift the mantissa right one bit */
+ stc /* Will set the ms bit */
+ rcrl FPU_result_2
+ rcrl FPU_result_1
+ rcrl %eax
+
+/* Round the result as required */
+LRound_precision:
+ decw EXP(%edi) /* binary point between 1st & 2nd bits */
+
+ movl %eax,%edx
+ movl FPU_result_1,%ebx
+ movl FPU_result_2,%eax
+ jmp fpu_reg_round
+
+
+#ifdef PARANOID
+/* The logic is wrong if we got here */
+L_bugged:
+ pushl EX_INTERNAL|0x202
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_bugged_1:
+ pushl EX_INTERNAL|0x203
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_bugged_2:
+ pushl EX_INTERNAL|0x204
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_exit:
+ movl $-1,%eax
+ popl %ebx
+ popl %edi
+ popl %esi
+
+ leave
+ ret
+#endif /* PARANOID */
diff --git a/arch/i386/math-emu/reg_u_mul.S b/arch/i386/math-emu/reg_u_mul.S
new file mode 100644
index 0000000..973f12a
--- /dev/null
+++ b/arch/i386/math-emu/reg_u_mul.S
@@ -0,0 +1,148 @@
+ .file "reg_u_mul.S"
+/*---------------------------------------------------------------------------+
+ | reg_u_mul.S |
+ | |
+ | Core multiplication routine |
+ | |
+ | Copyright (C) 1992,1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Basic multiplication routine. |
+ | Does not check the resulting exponent for overflow/underflow |
+ | |
+ | FPU_u_mul(FPU_REG *a, FPU_REG *b, FPU_REG *c, unsigned int cw); |
+ | |
+ | Internal working is at approx 128 bits. |
+ | Result is rounded to nearest 53 or 64 bits, using "nearest or even". |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+
+
+
+#ifndef NON_REENTRANT_FPU
+/* Local storage on the stack: */
+#define FPU_accum_0 -4(%ebp) /* ms word */
+#define FPU_accum_1 -8(%ebp)
+
+#else
+/* Local storage in a static area: */
+.data
+ .align 4,0
+FPU_accum_0:
+ .long 0
+FPU_accum_1:
+ .long 0
+#endif /* NON_REENTRANT_FPU */
+
+
+.text
+ENTRY(FPU_u_mul)
+ pushl %ebp
+ movl %esp,%ebp
+#ifndef NON_REENTRANT_FPU
+ subl $8,%esp
+#endif /* NON_REENTRANT_FPU */
+
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%esi
+ movl PARAM2,%edi
+
+#ifdef PARANOID
+ testl $0x80000000,SIGH(%esi)
+ jz L_bugged
+ testl $0x80000000,SIGH(%edi)
+ jz L_bugged
+#endif /* PARANOID */
+
+ xorl %ecx,%ecx
+ xorl %ebx,%ebx
+
+ movl SIGL(%esi),%eax
+ mull SIGL(%edi)
+ movl %eax,FPU_accum_0
+ movl %edx,FPU_accum_1
+
+ movl SIGL(%esi),%eax
+ mull SIGH(%edi)
+ addl %eax,FPU_accum_1
+ adcl %edx,%ebx
+/* adcl $0,%ecx // overflow here is not possible */
+
+ movl SIGH(%esi),%eax
+ mull SIGL(%edi)
+ addl %eax,FPU_accum_1
+ adcl %edx,%ebx
+ adcl $0,%ecx
+
+ movl SIGH(%esi),%eax
+ mull SIGH(%edi)
+ addl %eax,%ebx
+ adcl %edx,%ecx
+
+ /* Get the sum of the exponents. */
+ movl PARAM6,%eax
+ subl EXP_BIAS-1,%eax
+
+ /* Two denormals can cause an exponent underflow */
+ cmpl EXP_WAY_UNDER,%eax
+ jg Exp_not_underflow
+
+ /* Set to a really low value allow correct handling */
+ movl EXP_WAY_UNDER,%eax
+
+Exp_not_underflow:
+
+/* Have now finished with the sources */
+ movl PARAM3,%edi /* Point to the destination */
+ movw %ax,EXP(%edi)
+
+/* Now make sure that the result is normalized */
+ testl $0x80000000,%ecx
+ jnz LResult_Normalised
+
+ /* Normalize by shifting left one bit */
+ shll $1,FPU_accum_0
+ rcll $1,FPU_accum_1
+ rcll $1,%ebx
+ rcll $1,%ecx
+ decw EXP(%edi)
+
+LResult_Normalised:
+ movl FPU_accum_0,%eax
+ movl FPU_accum_1,%edx
+ orl %eax,%eax
+ jz L_extent_zero
+
+ orl $1,%edx
+
+L_extent_zero:
+ movl %ecx,%eax
+ jmp fpu_reg_round
+
+
+#ifdef PARANOID
+L_bugged:
+ pushl EX_INTERNAL|0x205
+ call EXCEPTION
+ pop %ebx
+ jmp L_exit
+
+L_exit:
+ popl %ebx
+ popl %edi
+ popl %esi
+ leave
+ ret
+#endif /* PARANOID */
+
diff --git a/arch/i386/math-emu/reg_u_sub.S b/arch/i386/math-emu/reg_u_sub.S
new file mode 100644
index 0000000..1b6c248
--- /dev/null
+++ b/arch/i386/math-emu/reg_u_sub.S
@@ -0,0 +1,272 @@
+ .file "reg_u_sub.S"
+/*---------------------------------------------------------------------------+
+ | reg_u_sub.S |
+ | |
+ | Core floating point subtraction routine. |
+ | |
+ | Copyright (C) 1992,1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | Call from C as: |
+ | int FPU_u_sub(FPU_REG *arg1, FPU_REG *arg2, FPU_REG *answ, |
+ | int control_w) |
+ | Return value is the tag of the answer, or-ed with FPU_Exception if |
+ | one was raised, or -1 on internal error. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*
+ | Kernel subtraction routine FPU_u_sub(reg *arg1, reg *arg2, reg *answ).
+ | Takes two valid reg f.p. numbers (TAG_Valid), which are
+ | treated as unsigned numbers,
+ | and returns their difference as a TAG_Valid or TAG_Zero f.p.
+ | number.
+ | The first number (arg1) must be the larger.
+ | The returned number is normalized.
+ | Basic checks are performed if PARANOID is defined.
+ */
+
+#include "exception.h"
+#include "fpu_emu.h"
+#include "control_w.h"
+
+.text
+ENTRY(FPU_u_sub)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%esi /* source 1 */
+ movl PARAM2,%edi /* source 2 */
+
+ movl PARAM6,%ecx
+ subl PARAM7,%ecx /* exp1 - exp2 */
+
+#ifdef PARANOID
+ /* source 2 is always smaller than source 1 */
+ js L_bugged_1
+
+ testl $0x80000000,SIGH(%edi) /* The args are assumed to be be normalized */
+ je L_bugged_2
+
+ testl $0x80000000,SIGH(%esi)
+ je L_bugged_2
+#endif /* PARANOID */
+
+/*--------------------------------------+
+ | Form a register holding the |
+ | smaller number |
+ +--------------------------------------*/
+ movl SIGH(%edi),%eax /* register ms word */
+ movl SIGL(%edi),%ebx /* register ls word */
+
+ movl PARAM3,%edi /* destination */
+ movl PARAM6,%edx
+ movw %dx,EXP(%edi) /* Copy exponent to destination */
+
+ xorl %edx,%edx /* register extension */
+
+/*--------------------------------------+
+ | Shift the temporary register |
+ | right the required number of |
+ | places. |
+ +--------------------------------------*/
+
+ cmpw $32,%cx /* shrd only works for 0..31 bits */
+ jnc L_more_than_31
+
+/* less than 32 bits */
+ shrd %cl,%ebx,%edx
+ shrd %cl,%eax,%ebx
+ shr %cl,%eax
+ jmp L_shift_done
+
+L_more_than_31:
+ cmpw $64,%cx
+ jnc L_more_than_63
+
+ subb $32,%cl
+ jz L_exactly_32
+
+ shrd %cl,%eax,%edx
+ shr %cl,%eax
+ orl %ebx,%ebx
+ jz L_more_31_no_low /* none of the lowest bits is set */
+
+ orl $1,%edx /* record the fact in the extension */
+
+L_more_31_no_low:
+ movl %eax,%ebx
+ xorl %eax,%eax
+ jmp L_shift_done
+
+L_exactly_32:
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ jmp L_shift_done
+
+L_more_than_63:
+ cmpw $65,%cx
+ jnc L_more_than_64
+
+ /* Shift right by 64 bits */
+ movl %eax,%edx
+ orl %ebx,%ebx
+ jz L_more_63_no_low
+
+ orl $1,%edx
+ jmp L_more_63_no_low
+
+L_more_than_64:
+ jne L_more_than_65
+
+ /* Shift right by 65 bits */
+ /* Carry is clear if we get here */
+ movl %eax,%edx
+ rcrl %edx
+ jnc L_shift_65_nc
+
+ orl $1,%edx
+ jmp L_more_63_no_low
+
+L_shift_65_nc:
+ orl %ebx,%ebx
+ jz L_more_63_no_low
+
+ orl $1,%edx
+ jmp L_more_63_no_low
+
+L_more_than_65:
+ movl $1,%edx /* The shifted nr always at least one '1' */
+
+L_more_63_no_low:
+ xorl %ebx,%ebx
+ xorl %eax,%eax
+
+L_shift_done:
+L_subtr:
+/*------------------------------+
+ | Do the subtraction |
+ +------------------------------*/
+ xorl %ecx,%ecx
+ subl %edx,%ecx
+ movl %ecx,%edx
+ movl SIGL(%esi),%ecx
+ sbbl %ebx,%ecx
+ movl %ecx,%ebx
+ movl SIGH(%esi),%ecx
+ sbbl %eax,%ecx
+ movl %ecx,%eax
+
+#ifdef PARANOID
+ /* We can never get a borrow */
+ jc L_bugged
+#endif /* PARANOID */
+
+/*--------------------------------------+
+ | Normalize the result |
+ +--------------------------------------*/
+ testl $0x80000000,%eax
+ jnz L_round /* no shifting needed */
+
+ orl %eax,%eax
+ jnz L_shift_1 /* shift left 1 - 31 bits */
+
+ orl %ebx,%ebx
+ jnz L_shift_32 /* shift left 32 - 63 bits */
+
+/*
+ * A rare case, the only one which is non-zero if we got here
+ * is: 1000000 .... 0000
+ * -0111111 .... 1111 1
+ * --------------------
+ * 0000000 .... 0000 1
+ */
+
+ cmpl $0x80000000,%edx
+ jnz L_must_be_zero
+
+ /* Shift left 64 bits */
+ subw $64,EXP(%edi)
+ xchg %edx,%eax
+ jmp fpu_reg_round
+
+L_must_be_zero:
+#ifdef PARANOID
+ orl %edx,%edx
+ jnz L_bugged_3
+#endif /* PARANOID */
+
+ /* The result is zero */
+ movw $0,EXP(%edi) /* exponent */
+ movl $0,SIGL(%edi)
+ movl $0,SIGH(%edi)
+ movl TAG_Zero,%eax
+ jmp L_exit
+
+L_shift_32:
+ movl %ebx,%eax
+ movl %edx,%ebx
+ movl $0,%edx
+ subw $32,EXP(%edi) /* Can get underflow here */
+
+/* We need to shift left by 1 - 31 bits */
+L_shift_1:
+ bsrl %eax,%ecx /* get the required shift in %ecx */
+ subl $31,%ecx
+ negl %ecx
+ shld %cl,%ebx,%eax
+ shld %cl,%edx,%ebx
+ shl %cl,%edx
+ subw %cx,EXP(%edi) /* Can get underflow here */
+
+L_round:
+ jmp fpu_reg_round /* Round the result */
+
+
+#ifdef PARANOID
+L_bugged_1:
+ pushl EX_INTERNAL|0x206
+ call EXCEPTION
+ pop %ebx
+ jmp L_error_exit
+
+L_bugged_2:
+ pushl EX_INTERNAL|0x209
+ call EXCEPTION
+ pop %ebx
+ jmp L_error_exit
+
+L_bugged_3:
+ pushl EX_INTERNAL|0x210
+ call EXCEPTION
+ pop %ebx
+ jmp L_error_exit
+
+L_bugged_4:
+ pushl EX_INTERNAL|0x211
+ call EXCEPTION
+ pop %ebx
+ jmp L_error_exit
+
+L_bugged:
+ pushl EX_INTERNAL|0x212
+ call EXCEPTION
+ pop %ebx
+ jmp L_error_exit
+
+L_error_exit:
+ movl $-1,%eax
+
+#endif /* PARANOID */
+
+L_exit:
+ popl %ebx
+ popl %edi
+ popl %esi
+ leave
+ ret
diff --git a/arch/i386/math-emu/round_Xsig.S b/arch/i386/math-emu/round_Xsig.S
new file mode 100644
index 0000000..bbe0e87
--- /dev/null
+++ b/arch/i386/math-emu/round_Xsig.S
@@ -0,0 +1,141 @@
+/*---------------------------------------------------------------------------+
+ | round_Xsig.S |
+ | |
+ | Copyright (C) 1992,1993,1994,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Normalize and round a 12 byte quantity. |
+ | Call from C as: |
+ | int round_Xsig(Xsig *n) |
+ | |
+ | Normalize a 12 byte quantity. |
+ | Call from C as: |
+ | int norm_Xsig(Xsig *n) |
+ | |
+ | Each function returns the size of the shift (nr of bits). |
+ | |
+ +---------------------------------------------------------------------------*/
+ .file "round_Xsig.S"
+
+#include "fpu_emu.h"
+
+
+.text
+ENTRY(round_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %ebx /* Reserve some space */
+ pushl %ebx
+ pushl %esi
+
+ movl PARAM1,%esi
+
+ movl 8(%esi),%edx
+ movl 4(%esi),%ebx
+ movl (%esi),%eax
+
+ movl $0,-4(%ebp)
+
+ orl %edx,%edx /* ms bits */
+ js L_round /* Already normalized */
+ jnz L_shift_1 /* Shift left 1 - 31 bits */
+
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ movl $-32,-4(%ebp)
+
+/* We need to shift left by 1 - 31 bits */
+L_shift_1:
+ bsrl %edx,%ecx /* get the required shift in %ecx */
+ subl $31,%ecx
+ negl %ecx
+ subl %ecx,-4(%ebp)
+ shld %cl,%ebx,%edx
+ shld %cl,%eax,%ebx
+ shl %cl,%eax
+
+L_round:
+ testl $0x80000000,%eax
+ jz L_exit
+
+ addl $1,%ebx
+ adcl $0,%edx
+ jnz L_exit
+
+ movl $0x80000000,%edx
+ incl -4(%ebp)
+
+L_exit:
+ movl %edx,8(%esi)
+ movl %ebx,4(%esi)
+ movl %eax,(%esi)
+
+ movl -4(%ebp),%eax
+
+ popl %esi
+ popl %ebx
+ leave
+ ret
+
+
+
+
+ENTRY(norm_Xsig)
+ pushl %ebp
+ movl %esp,%ebp
+ pushl %ebx /* Reserve some space */
+ pushl %ebx
+ pushl %esi
+
+ movl PARAM1,%esi
+
+ movl 8(%esi),%edx
+ movl 4(%esi),%ebx
+ movl (%esi),%eax
+
+ movl $0,-4(%ebp)
+
+ orl %edx,%edx /* ms bits */
+ js L_n_exit /* Already normalized */
+ jnz L_n_shift_1 /* Shift left 1 - 31 bits */
+
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ movl $-32,-4(%ebp)
+
+ orl %edx,%edx /* ms bits */
+ js L_n_exit /* Normalized now */
+ jnz L_n_shift_1 /* Shift left 1 - 31 bits */
+
+ movl %ebx,%edx
+ movl %eax,%ebx
+ xorl %eax,%eax
+ addl $-32,-4(%ebp)
+ jmp L_n_exit /* Might not be normalized,
+ but shift no more. */
+
+/* We need to shift left by 1 - 31 bits */
+L_n_shift_1:
+ bsrl %edx,%ecx /* get the required shift in %ecx */
+ subl $31,%ecx
+ negl %ecx
+ subl %ecx,-4(%ebp)
+ shld %cl,%ebx,%edx
+ shld %cl,%eax,%ebx
+ shl %cl,%eax
+
+L_n_exit:
+ movl %edx,8(%esi)
+ movl %ebx,4(%esi)
+ movl %eax,(%esi)
+
+ movl -4(%ebp),%eax
+
+ popl %esi
+ popl %ebx
+ leave
+ ret
+
diff --git a/arch/i386/math-emu/shr_Xsig.S b/arch/i386/math-emu/shr_Xsig.S
new file mode 100644
index 0000000..31cdd11
--- /dev/null
+++ b/arch/i386/math-emu/shr_Xsig.S
@@ -0,0 +1,87 @@
+ .file "shr_Xsig.S"
+/*---------------------------------------------------------------------------+
+ | shr_Xsig.S |
+ | |
+ | 12 byte right shift function |
+ | |
+ | Copyright (C) 1992,1994,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Call from C as: |
+ | void shr_Xsig(Xsig *arg, unsigned nr) |
+ | |
+ | Extended shift right function. |
+ | Fastest for small shifts. |
+ | Shifts the 12 byte quantity pointed to by the first arg (arg) |
+ | right by the number of bits specified by the second arg (nr). |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+
+.text
+ENTRY(shr_Xsig)
+ push %ebp
+ movl %esp,%ebp
+ pushl %esi
+ movl PARAM2,%ecx
+ movl PARAM1,%esi
+ cmpl $32,%ecx /* shrd only works for 0..31 bits */
+ jnc L_more_than_31
+
+/* less than 32 bits */
+ pushl %ebx
+ movl (%esi),%eax /* lsl */
+ movl 4(%esi),%ebx /* midl */
+ movl 8(%esi),%edx /* msl */
+ shrd %cl,%ebx,%eax
+ shrd %cl,%edx,%ebx
+ shr %cl,%edx
+ movl %eax,(%esi)
+ movl %ebx,4(%esi)
+ movl %edx,8(%esi)
+ popl %ebx
+ popl %esi
+ leave
+ ret
+
+L_more_than_31:
+ cmpl $64,%ecx
+ jnc L_more_than_63
+
+ subb $32,%cl
+ movl 4(%esi),%eax /* midl */
+ movl 8(%esi),%edx /* msl */
+ shrd %cl,%edx,%eax
+ shr %cl,%edx
+ movl %eax,(%esi)
+ movl %edx,4(%esi)
+ movl $0,8(%esi)
+ popl %esi
+ leave
+ ret
+
+L_more_than_63:
+ cmpl $96,%ecx
+ jnc L_more_than_95
+
+ subb $64,%cl
+ movl 8(%esi),%eax /* msl */
+ shr %cl,%eax
+ xorl %edx,%edx
+ movl %eax,(%esi)
+ movl %edx,4(%esi)
+ movl %edx,8(%esi)
+ popl %esi
+ leave
+ ret
+
+L_more_than_95:
+ xorl %eax,%eax
+ movl %eax,(%esi)
+ movl %eax,4(%esi)
+ movl %eax,8(%esi)
+ popl %esi
+ leave
+ ret
diff --git a/arch/i386/math-emu/status_w.h b/arch/i386/math-emu/status_w.h
new file mode 100644
index 0000000..78d7b76
--- /dev/null
+++ b/arch/i386/math-emu/status_w.h
@@ -0,0 +1,65 @@
+/*---------------------------------------------------------------------------+
+ | status_w.h |
+ | |
+ | Copyright (C) 1992,1993 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@vaxc.cc.monash.edu.au |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#ifndef _STATUS_H_
+#define _STATUS_H_
+
+#include "fpu_emu.h" /* for definition of PECULIAR_486 */
+
+#ifdef __ASSEMBLY__
+#define Const__(x) $##x
+#else
+#define Const__(x) x
+#endif
+
+#define SW_Backward Const__(0x8000) /* backward compatibility */
+#define SW_C3 Const__(0x4000) /* condition bit 3 */
+#define SW_Top Const__(0x3800) /* top of stack */
+#define SW_Top_Shift Const__(11) /* shift for top of stack bits */
+#define SW_C2 Const__(0x0400) /* condition bit 2 */
+#define SW_C1 Const__(0x0200) /* condition bit 1 */
+#define SW_C0 Const__(0x0100) /* condition bit 0 */
+#define SW_Summary Const__(0x0080) /* exception summary */
+#define SW_Stack_Fault Const__(0x0040) /* stack fault */
+#define SW_Precision Const__(0x0020) /* loss of precision */
+#define SW_Underflow Const__(0x0010) /* underflow */
+#define SW_Overflow Const__(0x0008) /* overflow */
+#define SW_Zero_Div Const__(0x0004) /* divide by zero */
+#define SW_Denorm_Op Const__(0x0002) /* denormalized operand */
+#define SW_Invalid Const__(0x0001) /* invalid operation */
+
+#define SW_Exc_Mask Const__(0x27f) /* Status word exception bit mask */
+
+#ifndef __ASSEMBLY__
+
+#define COMP_A_gt_B 1
+#define COMP_A_eq_B 2
+#define COMP_A_lt_B 3
+#define COMP_No_Comp 4
+#define COMP_Denormal 0x20
+#define COMP_NaN 0x40
+#define COMP_SNaN 0x80
+
+#define status_word() \
+ ((partial_status & ~SW_Top & 0xffff) | ((top << SW_Top_Shift) & SW_Top))
+#define setcc(cc) ({ \
+ partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); \
+ partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); })
+
+#ifdef PECULIAR_486
+ /* Default, this conveys no information, but an 80486 does it. */
+ /* Clear the SW_C1 bit, "other bits undefined". */
+# define clear_C1() { partial_status &= ~SW_C1; }
+# else
+# define clear_C1()
+#endif /* PECULIAR_486 */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _STATUS_H_ */
diff --git a/arch/i386/math-emu/version.h b/arch/i386/math-emu/version.h
new file mode 100644
index 0000000..a0d73a1
--- /dev/null
+++ b/arch/i386/math-emu/version.h
@@ -0,0 +1,12 @@
+/*---------------------------------------------------------------------------+
+ | version.h |
+ | |
+ | |
+ | Copyright (C) 1992,1993,1994,1996,1997,1999 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@melbpc.org.au |
+ | |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#define FPU_VERSION "wm-FPU-emu version 2.01"
diff --git a/arch/i386/math-emu/wm_shrx.S b/arch/i386/math-emu/wm_shrx.S
new file mode 100644
index 0000000..5184283
--- /dev/null
+++ b/arch/i386/math-emu/wm_shrx.S
@@ -0,0 +1,204 @@
+ .file "wm_shrx.S"
+/*---------------------------------------------------------------------------+
+ | wm_shrx.S |
+ | |
+ | 64 bit right shift functions |
+ | |
+ | Copyright (C) 1992,1995 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@jacobi.maths.monash.edu.au |
+ | |
+ | Call from C as: |
+ | unsigned FPU_shrx(void *arg1, unsigned arg2) |
+ | and |
+ | unsigned FPU_shrxs(void *arg1, unsigned arg2) |
+ | |
+ +---------------------------------------------------------------------------*/
+
+#include "fpu_emu.h"
+
+.text
+/*---------------------------------------------------------------------------+
+ | unsigned FPU_shrx(void *arg1, unsigned arg2) |
+ | |
+ | Extended shift right function. |
+ | Fastest for small shifts. |
+ | Shifts the 64 bit quantity pointed to by the first arg (arg1) |
+ | right by the number of bits specified by the second arg (arg2). |
+ | Forms a 96 bit quantity from the 64 bit arg and eax: |
+ | [ 64 bit arg ][ eax ] |
+ | shift right ---------> |
+ | The eax register is initialized to 0 before the shifting. |
+ | Results returned in the 64 bit arg and eax. |
+ +---------------------------------------------------------------------------*/
+
+ENTRY(FPU_shrx)
+ push %ebp
+ movl %esp,%ebp
+ pushl %esi
+ movl PARAM2,%ecx
+ movl PARAM1,%esi
+ cmpl $32,%ecx /* shrd only works for 0..31 bits */
+ jnc L_more_than_31
+
+/* less than 32 bits */
+ pushl %ebx
+ movl (%esi),%ebx /* lsl */
+ movl 4(%esi),%edx /* msl */
+ xorl %eax,%eax /* extension */
+ shrd %cl,%ebx,%eax
+ shrd %cl,%edx,%ebx
+ shr %cl,%edx
+ movl %ebx,(%esi)
+ movl %edx,4(%esi)
+ popl %ebx
+ popl %esi
+ leave
+ ret
+
+L_more_than_31:
+ cmpl $64,%ecx
+ jnc L_more_than_63
+
+ subb $32,%cl
+ movl (%esi),%eax /* lsl */
+ movl 4(%esi),%edx /* msl */
+ shrd %cl,%edx,%eax
+ shr %cl,%edx
+ movl %edx,(%esi)
+ movl $0,4(%esi)
+ popl %esi
+ leave
+ ret
+
+L_more_than_63:
+ cmpl $96,%ecx
+ jnc L_more_than_95
+
+ subb $64,%cl
+ movl 4(%esi),%eax /* msl */
+ shr %cl,%eax
+ xorl %edx,%edx
+ movl %edx,(%esi)
+ movl %edx,4(%esi)
+ popl %esi
+ leave
+ ret
+
+L_more_than_95:
+ xorl %eax,%eax
+ movl %eax,(%esi)
+ movl %eax,4(%esi)
+ popl %esi
+ leave
+ ret
+
+
+/*---------------------------------------------------------------------------+
+ | unsigned FPU_shrxs(void *arg1, unsigned arg2) |
+ | |
+ | Extended shift right function (optimized for small floating point |
+ | integers). |
+ | Shifts the 64 bit quantity pointed to by the first arg (arg1) |
+ | right by the number of bits specified by the second arg (arg2). |
+ | Forms a 96 bit quantity from the 64 bit arg and eax: |
+ | [ 64 bit arg ][ eax ] |
+ | shift right ---------> |
+ | The eax register is initialized to 0 before the shifting. |
+ | The lower 8 bits of eax are lost and replaced by a flag which is |
+ | set (to 0x01) if any bit, apart from the first one, is set in the |
+ | part which has been shifted out of the arg. |
+ | Results returned in the 64 bit arg and eax. |
+ +---------------------------------------------------------------------------*/
+ENTRY(FPU_shrxs)
+ push %ebp
+ movl %esp,%ebp
+ pushl %esi
+ pushl %ebx
+ movl PARAM2,%ecx
+ movl PARAM1,%esi
+ cmpl $64,%ecx /* shrd only works for 0..31 bits */
+ jnc Ls_more_than_63
+
+ cmpl $32,%ecx /* shrd only works for 0..31 bits */
+ jc Ls_less_than_32
+
+/* We got here without jumps by assuming that the most common requirement
+ is for small integers */
+/* Shift by [32..63] bits */
+ subb $32,%cl
+ movl (%esi),%eax /* lsl */
+ movl 4(%esi),%edx /* msl */
+ xorl %ebx,%ebx
+ shrd %cl,%eax,%ebx
+ shrd %cl,%edx,%eax
+ shr %cl,%edx
+ orl %ebx,%ebx /* test these 32 bits */
+ setne %bl
+ test $0x7fffffff,%eax /* and 31 bits here */
+ setne %bh
+ orw %bx,%bx /* Any of the 63 bit set ? */
+ setne %al
+ movl %edx,(%esi)
+ movl $0,4(%esi)
+ popl %ebx
+ popl %esi
+ leave
+ ret
+
+/* Shift by [0..31] bits */
+Ls_less_than_32:
+ movl (%esi),%ebx /* lsl */
+ movl 4(%esi),%edx /* msl */
+ xorl %eax,%eax /* extension */
+ shrd %cl,%ebx,%eax
+ shrd %cl,%edx,%ebx
+ shr %cl,%edx
+ test $0x7fffffff,%eax /* only need to look at eax here */
+ setne %al
+ movl %ebx,(%esi)
+ movl %edx,4(%esi)
+ popl %ebx
+ popl %esi
+ leave
+ ret
+
+/* Shift by [64..95] bits */
+Ls_more_than_63:
+ cmpl $96,%ecx
+ jnc Ls_more_than_95
+
+ subb $64,%cl
+ movl (%esi),%ebx /* lsl */
+ movl 4(%esi),%eax /* msl */
+ xorl %edx,%edx /* extension */
+ shrd %cl,%ebx,%edx
+ shrd %cl,%eax,%ebx
+ shr %cl,%eax
+ orl %ebx,%edx
+ setne %bl
+ test $0x7fffffff,%eax /* only need to look at eax here */
+ setne %bh
+ orw %bx,%bx
+ setne %al
+ xorl %edx,%edx
+ movl %edx,(%esi) /* set to zero */
+ movl %edx,4(%esi) /* set to zero */
+ popl %ebx
+ popl %esi
+ leave
+ ret
+
+Ls_more_than_95:
+/* Shift by [96..inf) bits */
+ xorl %eax,%eax
+ movl (%esi),%ebx
+ orl 4(%esi),%ebx
+ setne %al
+ xorl %ebx,%ebx
+ movl %ebx,(%esi)
+ movl %ebx,4(%esi)
+ popl %ebx
+ popl %esi
+ leave
+ ret
diff --git a/arch/i386/math-emu/wm_sqrt.S b/arch/i386/math-emu/wm_sqrt.S
new file mode 100644
index 0000000..d258f59
--- /dev/null
+++ b/arch/i386/math-emu/wm_sqrt.S
@@ -0,0 +1,470 @@
+ .file "wm_sqrt.S"
+/*---------------------------------------------------------------------------+
+ | wm_sqrt.S |
+ | |
+ | Fixed point arithmetic square root evaluation. |
+ | |
+ | Copyright (C) 1992,1993,1995,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
+ | Australia. E-mail billm@suburbia.net |
+ | |
+ | Call from C as: |
+ | int wm_sqrt(FPU_REG *n, unsigned int control_word) |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | wm_sqrt(FPU_REG *n, unsigned int control_word) |
+ | returns the square root of n in n. |
+ | |
+ | Use Newton's method to compute the square root of a number, which must |
+ | be in the range [1.0 .. 4.0), to 64 bits accuracy. |
+ | Does not check the sign or tag of the argument. |
+ | Sets the exponent, but not the sign or tag of the result. |
+ | |
+ | The guess is kept in %esi:%edi |
+ +---------------------------------------------------------------------------*/
+
+#include "exception.h"
+#include "fpu_emu.h"
+
+
+#ifndef NON_REENTRANT_FPU
+/* Local storage on the stack: */
+#define FPU_accum_3 -4(%ebp) /* ms word */
+#define FPU_accum_2 -8(%ebp)
+#define FPU_accum_1 -12(%ebp)
+#define FPU_accum_0 -16(%ebp)
+
+/*
+ * The de-normalised argument:
+ * sq_2 sq_1 sq_0
+ * b b b b b b b ... b b b b b b .... b b b b 0 0 0 ... 0
+ * ^ binary point here
+ */
+#define FPU_fsqrt_arg_2 -20(%ebp) /* ms word */
+#define FPU_fsqrt_arg_1 -24(%ebp)
+#define FPU_fsqrt_arg_0 -28(%ebp) /* ls word, at most the ms bit is set */
+
+#else
+/* Local storage in a static area: */
+.data
+ .align 4,0
+FPU_accum_3:
+ .long 0 /* ms word */
+FPU_accum_2:
+ .long 0
+FPU_accum_1:
+ .long 0
+FPU_accum_0:
+ .long 0
+
+/* The de-normalised argument:
+ sq_2 sq_1 sq_0
+ b b b b b b b ... b b b b b b .... b b b b 0 0 0 ... 0
+ ^ binary point here
+ */
+FPU_fsqrt_arg_2:
+ .long 0 /* ms word */
+FPU_fsqrt_arg_1:
+ .long 0
+FPU_fsqrt_arg_0:
+ .long 0 /* ls word, at most the ms bit is set */
+#endif /* NON_REENTRANT_FPU */
+
+
+.text
+ENTRY(wm_sqrt)
+ pushl %ebp
+ movl %esp,%ebp
+#ifndef NON_REENTRANT_FPU
+ subl $28,%esp
+#endif /* NON_REENTRANT_FPU */
+ pushl %esi
+ pushl %edi
+ pushl %ebx
+
+ movl PARAM1,%esi
+
+ movl SIGH(%esi),%eax
+ movl SIGL(%esi),%ecx
+ xorl %edx,%edx
+
+/* We use a rough linear estimate for the first guess.. */
+
+ cmpw EXP_BIAS,EXP(%esi)
+ jnz sqrt_arg_ge_2
+
+ shrl $1,%eax /* arg is in the range [1.0 .. 2.0) */
+ rcrl $1,%ecx
+ rcrl $1,%edx
+
+sqrt_arg_ge_2:
+/* From here on, n is never accessed directly again until it is
+ replaced by the answer. */
+
+ movl %eax,FPU_fsqrt_arg_2 /* ms word of n */
+ movl %ecx,FPU_fsqrt_arg_1
+ movl %edx,FPU_fsqrt_arg_0
+
+/* Make a linear first estimate */
+ shrl $1,%eax
+ addl $0x40000000,%eax
+ movl $0xaaaaaaaa,%ecx
+ mull %ecx
+ shll %edx /* max result was 7fff... */
+ testl $0x80000000,%edx /* but min was 3fff... */
+ jnz sqrt_prelim_no_adjust
+
+ movl $0x80000000,%edx /* round up */
+
+sqrt_prelim_no_adjust:
+ movl %edx,%esi /* Our first guess */
+
+/* We have now computed (approx) (2 + x) / 3, which forms the basis
+ for a few iterations of Newton's method */
+
+ movl FPU_fsqrt_arg_2,%ecx /* ms word */
+
+/*
+ * From our initial estimate, three iterations are enough to get us
+ * to 30 bits or so. This will then allow two iterations at better
+ * precision to complete the process.
+ */
+
+/* Compute (g + n/g)/2 at each iteration (g is the guess). */
+ shrl %ecx /* Doing this first will prevent a divide */
+ /* overflow later. */
+
+ movl %ecx,%edx /* msw of the arg / 2 */
+ divl %esi /* current estimate */
+ shrl %esi /* divide by 2 */
+ addl %eax,%esi /* the new estimate */
+
+ movl %ecx,%edx
+ divl %esi
+ shrl %esi
+ addl %eax,%esi
+
+ movl %ecx,%edx
+ divl %esi
+ shrl %esi
+ addl %eax,%esi
+
+/*
+ * Now that an estimate accurate to about 30 bits has been obtained (in %esi),
+ * we improve it to 60 bits or so.
+ *
+ * The strategy from now on is to compute new estimates from
+ * guess := guess + (n - guess^2) / (2 * guess)
+ */
+
+/* First, find the square of the guess */
+ movl %esi,%eax
+ mull %esi
+/* guess^2 now in %edx:%eax */
+
+ movl FPU_fsqrt_arg_1,%ecx
+ subl %ecx,%eax
+ movl FPU_fsqrt_arg_2,%ecx /* ms word of normalized n */
+ sbbl %ecx,%edx
+ jnc sqrt_stage_2_positive
+
+/* Subtraction gives a negative result,
+ negate the result before division. */
+ notl %edx
+ notl %eax
+ addl $1,%eax
+ adcl $0,%edx
+
+ divl %esi
+ movl %eax,%ecx
+
+ movl %edx,%eax
+ divl %esi
+ jmp sqrt_stage_2_finish
+
+sqrt_stage_2_positive:
+ divl %esi
+ movl %eax,%ecx
+
+ movl %edx,%eax
+ divl %esi
+
+ notl %ecx
+ notl %eax
+ addl $1,%eax
+ adcl $0,%ecx
+
+sqrt_stage_2_finish:
+ sarl $1,%ecx /* divide by 2 */
+ rcrl $1,%eax
+
+ /* Form the new estimate in %esi:%edi */
+ movl %eax,%edi
+ addl %ecx,%esi
+
+ jnz sqrt_stage_2_done /* result should be [1..2) */
+
+#ifdef PARANOID
+/* It should be possible to get here only if the arg is ffff....ffff */
+ cmp $0xffffffff,FPU_fsqrt_arg_1
+ jnz sqrt_stage_2_error
+#endif /* PARANOID */
+
+/* The best rounded result. */
+ xorl %eax,%eax
+ decl %eax
+ movl %eax,%edi
+ movl %eax,%esi
+ movl $0x7fffffff,%eax
+ jmp sqrt_round_result
+
+#ifdef PARANOID
+sqrt_stage_2_error:
+ pushl EX_INTERNAL|0x213
+ call EXCEPTION
+#endif /* PARANOID */
+
+sqrt_stage_2_done:
+
+/* Now the square root has been computed to better than 60 bits. */
+
+/* Find the square of the guess. */
+ movl %edi,%eax /* ls word of guess */
+ mull %edi
+ movl %edx,FPU_accum_1
+
+ movl %esi,%eax
+ mull %esi
+ movl %edx,FPU_accum_3
+ movl %eax,FPU_accum_2
+
+ movl %edi,%eax
+ mull %esi
+ addl %eax,FPU_accum_1
+ adcl %edx,FPU_accum_2
+ adcl $0,FPU_accum_3
+
+/* movl %esi,%eax */
+/* mull %edi */
+ addl %eax,FPU_accum_1
+ adcl %edx,FPU_accum_2
+ adcl $0,FPU_accum_3
+
+/* guess^2 now in FPU_accum_3:FPU_accum_2:FPU_accum_1 */
+
+ movl FPU_fsqrt_arg_0,%eax /* get normalized n */
+ subl %eax,FPU_accum_1
+ movl FPU_fsqrt_arg_1,%eax
+ sbbl %eax,FPU_accum_2
+ movl FPU_fsqrt_arg_2,%eax /* ms word of normalized n */
+ sbbl %eax,FPU_accum_3
+ jnc sqrt_stage_3_positive
+
+/* Subtraction gives a negative result,
+ negate the result before division */
+ notl FPU_accum_1
+ notl FPU_accum_2
+ notl FPU_accum_3
+ addl $1,FPU_accum_1
+ adcl $0,FPU_accum_2
+
+#ifdef PARANOID
+ adcl $0,FPU_accum_3 /* This must be zero */
+ jz sqrt_stage_3_no_error
+
+sqrt_stage_3_error:
+ pushl EX_INTERNAL|0x207
+ call EXCEPTION
+
+sqrt_stage_3_no_error:
+#endif /* PARANOID */
+
+ movl FPU_accum_2,%edx
+ movl FPU_accum_1,%eax
+ divl %esi
+ movl %eax,%ecx
+
+ movl %edx,%eax
+ divl %esi
+
+ sarl $1,%ecx /* divide by 2 */
+ rcrl $1,%eax
+
+ /* prepare to round the result */
+
+ addl %ecx,%edi
+ adcl $0,%esi
+
+ jmp sqrt_stage_3_finished
+
+sqrt_stage_3_positive:
+ movl FPU_accum_2,%edx
+ movl FPU_accum_1,%eax
+ divl %esi
+ movl %eax,%ecx
+
+ movl %edx,%eax
+ divl %esi
+
+ sarl $1,%ecx /* divide by 2 */
+ rcrl $1,%eax
+
+ /* prepare to round the result */
+
+ notl %eax /* Negate the correction term */
+ notl %ecx
+ addl $1,%eax
+ adcl $0,%ecx /* carry here ==> correction == 0 */
+ adcl $0xffffffff,%esi
+
+ addl %ecx,%edi
+ adcl $0,%esi
+
+sqrt_stage_3_finished:
+
+/*
+ * The result in %esi:%edi:%esi should be good to about 90 bits here,
+ * and the rounding information here does not have sufficient accuracy
+ * in a few rare cases.
+ */
+ cmpl $0xffffffe0,%eax
+ ja sqrt_near_exact_x
+
+ cmpl $0x00000020,%eax
+ jb sqrt_near_exact
+
+ cmpl $0x7fffffe0,%eax
+ jb sqrt_round_result
+
+ cmpl $0x80000020,%eax
+ jb sqrt_get_more_precision
+
+sqrt_round_result:
+/* Set up for rounding operations */
+ movl %eax,%edx
+ movl %esi,%eax
+ movl %edi,%ebx
+ movl PARAM1,%edi
+ movw EXP_BIAS,EXP(%edi) /* Result is in [1.0 .. 2.0) */
+ jmp fpu_reg_round
+
+
+sqrt_near_exact_x:
+/* First, the estimate must be rounded up. */
+ addl $1,%edi
+ adcl $0,%esi
+
+sqrt_near_exact:
+/*
+ * This is an easy case because x^1/2 is monotonic.
+ * We need just find the square of our estimate, compare it
+ * with the argument, and deduce whether our estimate is
+ * above, below, or exact. We use the fact that the estimate
+ * is known to be accurate to about 90 bits.
+ */
+ movl %edi,%eax /* ls word of guess */
+ mull %edi
+ movl %edx,%ebx /* 2nd ls word of square */
+ movl %eax,%ecx /* ls word of square */
+
+ movl %edi,%eax
+ mull %esi
+ addl %eax,%ebx
+ addl %eax,%ebx
+
+#ifdef PARANOID
+ cmp $0xffffffb0,%ebx
+ jb sqrt_near_exact_ok
+
+ cmp $0x00000050,%ebx
+ ja sqrt_near_exact_ok
+
+ pushl EX_INTERNAL|0x214
+ call EXCEPTION
+
+sqrt_near_exact_ok:
+#endif /* PARANOID */
+
+ or %ebx,%ebx
+ js sqrt_near_exact_small
+
+ jnz sqrt_near_exact_large
+
+ or %ebx,%edx
+ jnz sqrt_near_exact_large
+
+/* Our estimate is exactly the right answer */
+ xorl %eax,%eax
+ jmp sqrt_round_result
+
+sqrt_near_exact_small:
+/* Our estimate is too small */
+ movl $0x000000ff,%eax
+ jmp sqrt_round_result
+
+sqrt_near_exact_large:
+/* Our estimate is too large, we need to decrement it */
+ subl $1,%edi
+ sbbl $0,%esi
+ movl $0xffffff00,%eax
+ jmp sqrt_round_result
+
+
+sqrt_get_more_precision:
+/* This case is almost the same as the above, except we start
+ with an extra bit of precision in the estimate. */
+ stc /* The extra bit. */
+ rcll $1,%edi /* Shift the estimate left one bit */
+ rcll $1,%esi
+
+ movl %edi,%eax /* ls word of guess */
+ mull %edi
+ movl %edx,%ebx /* 2nd ls word of square */
+ movl %eax,%ecx /* ls word of square */
+
+ movl %edi,%eax
+ mull %esi
+ addl %eax,%ebx
+ addl %eax,%ebx
+
+/* Put our estimate back to its original value */
+ stc /* The ms bit. */
+ rcrl $1,%esi /* Shift the estimate left one bit */
+ rcrl $1,%edi
+
+#ifdef PARANOID
+ cmp $0xffffff60,%ebx
+ jb sqrt_more_prec_ok
+
+ cmp $0x000000a0,%ebx
+ ja sqrt_more_prec_ok
+
+ pushl EX_INTERNAL|0x215
+ call EXCEPTION
+
+sqrt_more_prec_ok:
+#endif /* PARANOID */
+
+ or %ebx,%ebx
+ js sqrt_more_prec_small
+
+ jnz sqrt_more_prec_large
+
+ or %ebx,%ecx
+ jnz sqrt_more_prec_large
+
+/* Our estimate is exactly the right answer */
+ movl $0x80000000,%eax
+ jmp sqrt_round_result
+
+sqrt_more_prec_small:
+/* Our estimate is too small */
+ movl $0x800000ff,%eax
+ jmp sqrt_round_result
+
+sqrt_more_prec_large:
+/* Our estimate is too large */
+ movl $0x7fffff00,%eax
+ jmp sqrt_round_result
diff --git a/arch/i386/mm/Makefile b/arch/i386/mm/Makefile
new file mode 100644
index 0000000..fc32725
--- /dev/null
+++ b/arch/i386/mm/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux i386-specific parts of the memory manager.
+#
+
+obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o mmap.o
+
+obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
+obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap.o
diff --git a/arch/i386/mm/boot_ioremap.c b/arch/i386/mm/boot_ioremap.c
new file mode 100644
index 0000000..523b306
--- /dev/null
+++ b/arch/i386/mm/boot_ioremap.c
@@ -0,0 +1,97 @@
+/*
+ * arch/i386/mm/boot_ioremap.c
+ *
+ * Re-map functions for early boot-time before paging_init() when the
+ * boot-time pagetables are still in use
+ *
+ * Written by Dave Hansen <haveblue@us.ibm.com>
+ */
+
+
+/*
+ * We need to use the 2-level pagetable functions, but CONFIG_X86_PAE
+ * keeps that from happenning. If anyone has a better way, I'm listening.
+ *
+ * boot_pte_t is defined only if this all works correctly
+ */
+
+#include <linux/config.h>
+#undef CONFIG_X86_PAE
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+
+/*
+ * I'm cheating here. It is known that the two boot PTE pages are
+ * allocated next to each other. I'm pretending that they're just
+ * one big array.
+ */
+
+#define BOOT_PTE_PTRS (PTRS_PER_PTE*2)
+#define boot_pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (BOOT_PTE_PTRS - 1))
+
+static inline boot_pte_t* boot_vaddr_to_pte(void *address)
+{
+ boot_pte_t* boot_pg = (boot_pte_t*)pg0;
+ return &boot_pg[boot_pte_index((unsigned long)address)];
+}
+
+/*
+ * This is only for a caller who is clever enough to page-align
+ * phys_addr and virtual_source, and who also has a preference
+ * about which virtual address from which to steal ptes
+ */
+static void __boot_ioremap(unsigned long phys_addr, unsigned long nrpages,
+ void* virtual_source)
+{
+ boot_pte_t* pte;
+ int i;
+ char *vaddr = virtual_source;
+
+ pte = boot_vaddr_to_pte(virtual_source);
+ for (i=0; i < nrpages; i++, phys_addr += PAGE_SIZE, pte++) {
+ set_pte(pte, pfn_pte(phys_addr>>PAGE_SHIFT, PAGE_KERNEL));
+ __flush_tlb_one(&vaddr[i*PAGE_SIZE]);
+ }
+}
+
+/* the virtual space we're going to remap comes from this array */
+#define BOOT_IOREMAP_PAGES 4
+#define BOOT_IOREMAP_SIZE (BOOT_IOREMAP_PAGES*PAGE_SIZE)
+static __initdata char boot_ioremap_space[BOOT_IOREMAP_SIZE]
+ __attribute__ ((aligned (PAGE_SIZE)));
+
+/*
+ * This only applies to things which need to ioremap before paging_init()
+ * bt_ioremap() and plain ioremap() are both useless at this point.
+ *
+ * When used, we're still using the boot-time pagetables, which only
+ * have 2 PTE pages mapping the first 8MB
+ *
+ * There is no unmap. The boot-time PTE pages aren't used after boot.
+ * If you really want the space back, just remap it yourself.
+ * boot_ioremap(&ioremap_space-PAGE_OFFSET, BOOT_IOREMAP_SIZE)
+ */
+__init void* boot_ioremap(unsigned long phys_addr, unsigned long size)
+{
+ unsigned long last_addr, offset;
+ unsigned int nrpages;
+
+ last_addr = phys_addr + size - 1;
+
+ /* page align the requested address */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr) - phys_addr;
+
+ nrpages = size >> PAGE_SHIFT;
+ if (nrpages > BOOT_IOREMAP_PAGES)
+ return NULL;
+
+ __boot_ioremap(phys_addr, nrpages, boot_ioremap_space);
+
+ return &boot_ioremap_space[offset];
+}
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
new file mode 100644
index 0000000..1726b40
--- /dev/null
+++ b/arch/i386/mm/discontig.c
@@ -0,0 +1,383 @@
+/*
+ * Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
+ * August 2002: added remote node KVA remap - Martin J. Bligh
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/nodemask.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/mmzone.h>
+#include <bios_ebda.h>
+
+struct pglist_data *node_data[MAX_NUMNODES];
+bootmem_data_t node0_bdata;
+
+/*
+ * numa interface - we expect the numa architecture specfic code to have
+ * populated the following initialisation.
+ *
+ * 1) node_online_map - the map of all nodes configured (online) in the system
+ * 2) physnode_map - the mapping between a pfn and owning node
+ * 3) node_start_pfn - the starting page frame number for a node
+ * 3) node_end_pfn - the ending page fram number for a node
+ */
+
+/*
+ * physnode_map keeps track of the physical memory layout of a generic
+ * numa node on a 256Mb break (each element of the array will
+ * represent 256Mb of memory and will be marked by the node id. so,
+ * if the first gig is on node 0, and the second gig is on node 1
+ * physnode_map will contain:
+ *
+ * physnode_map[0-3] = 0;
+ * physnode_map[4-7] = 1;
+ * physnode_map[8- ] = -1;
+ */
+s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+
+void memory_present(int nid, unsigned long start, unsigned long end)
+{
+ unsigned long pfn;
+
+ printk(KERN_INFO "Node: %d, start_pfn: %ld, end_pfn: %ld\n",
+ nid, start, end);
+ printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
+ printk(KERN_DEBUG " ");
+ for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
+ physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
+ printk("%ld ", pfn);
+ }
+ printk("\n");
+}
+
+unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ unsigned long nr_pages = end_pfn - start_pfn;
+
+ if (!nr_pages)
+ return 0;
+
+ return (nr_pages + 1) * sizeof(struct page);
+}
+
+unsigned long node_start_pfn[MAX_NUMNODES];
+unsigned long node_end_pfn[MAX_NUMNODES];
+
+extern unsigned long find_max_low_pfn(void);
+extern void find_max_pfn(void);
+extern void one_highpage_init(struct page *, int, int);
+
+extern struct e820map e820;
+extern unsigned long init_pg_tables_end;
+extern unsigned long highend_pfn, highstart_pfn;
+extern unsigned long max_low_pfn;
+extern unsigned long totalram_pages;
+extern unsigned long totalhigh_pages;
+
+#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
+
+unsigned long node_remap_start_pfn[MAX_NUMNODES];
+unsigned long node_remap_size[MAX_NUMNODES];
+unsigned long node_remap_offset[MAX_NUMNODES];
+void *node_remap_start_vaddr[MAX_NUMNODES];
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
+
+/*
+ * FLAT - support for basic PC memory model with discontig enabled, essentially
+ * a single node with all available processors in it with a flat
+ * memory map.
+ */
+int __init get_memcfg_numa_flat(void)
+{
+ printk("NUMA - single node, flat memory mode\n");
+
+ /* Run the memory configuration and find the top of memory. */
+ find_max_pfn();
+ node_start_pfn[0] = 0;
+ node_end_pfn[0] = max_pfn;
+ memory_present(0, 0, max_pfn);
+
+ /* Indicate there is one node available. */
+ nodes_clear(node_online_map);
+ node_set_online(0);
+ return 1;
+}
+
+/*
+ * Find the highest page frame number we have available for the node
+ */
+static void __init find_max_pfn_node(int nid)
+{
+ if (node_end_pfn[nid] > max_pfn)
+ node_end_pfn[nid] = max_pfn;
+ /*
+ * if a user has given mem=XXXX, then we need to make sure
+ * that the node _starts_ before that, too, not just ends
+ */
+ if (node_start_pfn[nid] > max_pfn)
+ node_start_pfn[nid] = max_pfn;
+ if (node_start_pfn[nid] > node_end_pfn[nid])
+ BUG();
+}
+
+/*
+ * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
+ * method. For node zero take this from the bottom of memory, for
+ * subsequent nodes place them at node_remap_start_vaddr which contains
+ * node local data in physically node local memory. See setup_memory()
+ * for details.
+ */
+static void __init allocate_pgdat(int nid)
+{
+ if (nid && node_has_online_mem(nid))
+ NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
+ else {
+ NODE_DATA(nid) = (pg_data_t *)(__va(min_low_pfn << PAGE_SHIFT));
+ min_low_pfn += PFN_UP(sizeof(pg_data_t));
+ }
+}
+
+void __init remap_numa_kva(void)
+{
+ void *vaddr;
+ unsigned long pfn;
+ int node;
+
+ for_each_online_node(node) {
+ if (node == 0)
+ continue;
+ for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
+ vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
+ set_pmd_pfn((ulong) vaddr,
+ node_remap_start_pfn[node] + pfn,
+ PAGE_KERNEL_LARGE);
+ }
+ }
+}
+
+static unsigned long calculate_numa_remap_pages(void)
+{
+ int nid;
+ unsigned long size, reserve_pages = 0;
+
+ for_each_online_node(nid) {
+ if (nid == 0)
+ continue;
+ if (!node_remap_size[nid])
+ continue;
+
+ /*
+ * The acpi/srat node info can show hot-add memroy zones
+ * where memory could be added but not currently present.
+ */
+ if (node_start_pfn[nid] > max_pfn)
+ continue;
+ if (node_end_pfn[nid] > max_pfn)
+ node_end_pfn[nid] = max_pfn;
+
+ /* ensure the remap includes space for the pgdat. */
+ size = node_remap_size[nid] + sizeof(pg_data_t);
+
+ /* convert size to large (pmd size) pages, rounding up */
+ size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
+ /* now the roundup is correct, convert to PAGE_SIZE pages */
+ size = size * PTRS_PER_PTE;
+ printk("Reserving %ld pages of KVA for lmem_map of node %d\n",
+ size, nid);
+ node_remap_size[nid] = size;
+ reserve_pages += size;
+ node_remap_offset[nid] = reserve_pages;
+ printk("Shrinking node %d from %ld pages to %ld pages\n",
+ nid, node_end_pfn[nid], node_end_pfn[nid] - size);
+ node_end_pfn[nid] -= size;
+ node_remap_start_pfn[nid] = node_end_pfn[nid];
+ }
+ printk("Reserving total of %ld pages for numa KVA remap\n",
+ reserve_pages);
+ return reserve_pages;
+}
+
+extern void setup_bootmem_allocator(void);
+unsigned long __init setup_memory(void)
+{
+ int nid;
+ unsigned long system_start_pfn, system_max_low_pfn;
+ unsigned long reserve_pages;
+
+ /*
+ * When mapping a NUMA machine we allocate the node_mem_map arrays
+ * from node local memory. They are then mapped directly into KVA
+ * between zone normal and vmalloc space. Calculate the size of
+ * this space and use it to adjust the boundry between ZONE_NORMAL
+ * and ZONE_HIGHMEM.
+ */
+ find_max_pfn();
+ get_memcfg_numa();
+
+ reserve_pages = calculate_numa_remap_pages();
+
+ /* partially used pages are not usable - thus round upwards */
+ system_start_pfn = min_low_pfn = PFN_UP(init_pg_tables_end);
+
+ system_max_low_pfn = max_low_pfn = find_max_low_pfn() - reserve_pages;
+ printk("reserve_pages = %ld find_max_low_pfn() ~ %ld\n",
+ reserve_pages, max_low_pfn + reserve_pages);
+ printk("max_pfn = %ld\n", max_pfn);
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = max_pfn;
+ if (max_pfn > system_max_low_pfn)
+ highstart_pfn = system_max_low_pfn;
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(system_max_low_pfn));
+ printk("min_low_pfn = %ld, max_low_pfn = %ld, highstart_pfn = %ld\n",
+ min_low_pfn, max_low_pfn, highstart_pfn);
+
+ printk("Low memory ends at vaddr %08lx\n",
+ (ulong) pfn_to_kaddr(max_low_pfn));
+ for_each_online_node(nid) {
+ node_remap_start_vaddr[nid] = pfn_to_kaddr(
+ (highstart_pfn + reserve_pages) - node_remap_offset[nid]);
+ allocate_pgdat(nid);
+ printk ("node %d will remap to vaddr %08lx - %08lx\n", nid,
+ (ulong) node_remap_start_vaddr[nid],
+ (ulong) pfn_to_kaddr(highstart_pfn + reserve_pages
+ - node_remap_offset[nid] + node_remap_size[nid]));
+ }
+ printk("High memory starts at vaddr %08lx\n",
+ (ulong) pfn_to_kaddr(highstart_pfn));
+ vmalloc_earlyreserve = reserve_pages * PAGE_SIZE;
+ for_each_online_node(nid)
+ find_max_pfn_node(nid);
+
+ memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
+ NODE_DATA(0)->bdata = &node0_bdata;
+ setup_bootmem_allocator();
+ return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+ int nid;
+
+ /*
+ * Insert nodes into pgdat_list backward so they appear in order.
+ * Clobber node 0's links and NULL out pgdat_list before starting.
+ */
+ pgdat_list = NULL;
+ for (nid = MAX_NUMNODES - 1; nid >= 0; nid--) {
+ if (!node_online(nid))
+ continue;
+ NODE_DATA(nid)->pgdat_next = pgdat_list;
+ pgdat_list = NODE_DATA(nid);
+ }
+
+ for_each_online_node(nid) {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+ unsigned long *zholes_size;
+ unsigned int max_dma;
+
+ unsigned long low = max_low_pfn;
+ unsigned long start = node_start_pfn[nid];
+ unsigned long high = node_end_pfn[nid];
+
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+
+ if (node_has_online_mem(nid)){
+ if (start > low) {
+#ifdef CONFIG_HIGHMEM
+ BUG_ON(start > high);
+ zones_size[ZONE_HIGHMEM] = high - start;
+#endif
+ } else {
+ if (low < max_dma)
+ zones_size[ZONE_DMA] = low;
+ else {
+ BUG_ON(max_dma > low);
+ BUG_ON(low > high);
+ zones_size[ZONE_DMA] = max_dma;
+ zones_size[ZONE_NORMAL] = low - max_dma;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = high - low;
+#endif
+ }
+ }
+ }
+
+ zholes_size = get_zholes_size(nid);
+ /*
+ * We let the lmem_map for node 0 be allocated from the
+ * normal bootmem allocator, but other nodes come from the
+ * remapped KVA area - mbligh
+ */
+ if (!nid)
+ free_area_init_node(nid, NODE_DATA(nid),
+ zones_size, start, zholes_size);
+ else {
+ unsigned long lmem_map;
+ lmem_map = (unsigned long)node_remap_start_vaddr[nid];
+ lmem_map += sizeof(pg_data_t) + PAGE_SIZE - 1;
+ lmem_map &= PAGE_MASK;
+ NODE_DATA(nid)->node_mem_map = (struct page *)lmem_map;
+ free_area_init_node(nid, NODE_DATA(nid), zones_size,
+ start, zholes_size);
+ }
+ }
+ return;
+}
+
+void __init set_highmem_pages_init(int bad_ppro)
+{
+#ifdef CONFIG_HIGHMEM
+ struct zone *zone;
+
+ for_each_zone(zone) {
+ unsigned long node_pfn, node_high_size, zone_start_pfn;
+ struct page * zone_mem_map;
+
+ if (!is_highmem(zone))
+ continue;
+
+ printk("Initializing %s for node %d\n", zone->name,
+ zone->zone_pgdat->node_id);
+
+ node_high_size = zone->spanned_pages;
+ zone_mem_map = zone->zone_mem_map;
+ zone_start_pfn = zone->zone_start_pfn;
+
+ for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) {
+ one_highpage_init((struct page *)(zone_mem_map + node_pfn),
+ zone_start_pfn + node_pfn, bad_ppro);
+ }
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+}
diff --git a/arch/i386/mm/extable.c b/arch/i386/mm/extable.c
new file mode 100644
index 0000000..f706449
--- /dev/null
+++ b/arch/i386/mm/extable.c
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/i386/mm/extable.c
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+#ifdef CONFIG_PNPBIOS
+ if (unlikely((regs->xcs & ~15) == (GDT_ENTRY_PNPBIOS_BASE << 3)))
+ {
+ extern u32 pnp_bios_fault_eip, pnp_bios_fault_esp;
+ extern u32 pnp_bios_is_utter_crap;
+ pnp_bios_is_utter_crap = 1;
+ printk(KERN_CRIT "PNPBIOS fault.. attempting recovery.\n");
+ __asm__ volatile(
+ "movl %0, %%esp\n\t"
+ "jmp *%1\n\t"
+ : : "g" (pnp_bios_fault_esp), "g" (pnp_bios_fault_eip));
+ panic("do_trap: can't hit this");
+ }
+#endif
+
+ fixup = search_exception_tables(regs->eip);
+ if (fixup) {
+ regs->eip = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
new file mode 100644
index 0000000..a509237
--- /dev/null
+++ b/arch/i386/mm/fault.c
@@ -0,0 +1,552 @@
+/*
+ * linux/arch/i386/mm/fault.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+#include <asm/kdebug.h>
+
+extern void die(const char *,struct pt_regs *,long);
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ int loglevel_save = console_loglevel;
+
+ if (yes) {
+ oops_in_progress = 1;
+ return;
+ }
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+}
+
+/*
+ * Return EIP plus the CS segment base. The segment limit is also
+ * adjusted, clamped to the kernel/user address space (whichever is
+ * appropriate), and returned in *eip_limit.
+ *
+ * The segment is checked, because it might have been changed by another
+ * task between the original faulting instruction and here.
+ *
+ * If CS is no longer a valid code segment, or if EIP is beyond the
+ * limit, or if it is a kernel address when CS is not a kernel segment,
+ * then the returned value will be greater than *eip_limit.
+ *
+ * This is slow, but is very rarely executed.
+ */
+static inline unsigned long get_segment_eip(struct pt_regs *regs,
+ unsigned long *eip_limit)
+{
+ unsigned long eip = regs->eip;
+ unsigned seg = regs->xcs & 0xffff;
+ u32 seg_ar, seg_limit, base, *desc;
+
+ /* The standard kernel/user address space limit. */
+ *eip_limit = (seg & 3) ? USER_DS.seg : KERNEL_DS.seg;
+
+ /* Unlikely, but must come before segment checks. */
+ if (unlikely((regs->eflags & VM_MASK) != 0))
+ return eip + (seg << 4);
+
+ /* By far the most common cases. */
+ if (likely(seg == __USER_CS || seg == __KERNEL_CS))
+ return eip;
+
+ /* Check the segment exists, is within the current LDT/GDT size,
+ that kernel/user (ring 0..3) has the appropriate privilege,
+ that it's a code segment, and get the limit. */
+ __asm__ ("larl %3,%0; lsll %3,%1"
+ : "=&r" (seg_ar), "=r" (seg_limit) : "0" (0), "rm" (seg));
+ if ((~seg_ar & 0x9800) || eip > seg_limit) {
+ *eip_limit = 0;
+ return 1; /* So that returned eip > *eip_limit. */
+ }
+
+ /* Get the GDT/LDT descriptor base.
+ When you look for races in this code remember that
+ LDT and other horrors are only used in user space. */
+ if (seg & (1<<2)) {
+ /* Must lock the LDT while reading it. */
+ down(¤t->mm->context.sem);
+ desc = current->mm->context.ldt;
+ desc = (void *)desc + (seg & ~7);
+ } else {
+ /* Must disable preemption while reading the GDT. */
+ desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu());
+ desc = (void *)desc + (seg & ~7);
+ }
+
+ /* Decode the code segment base from the descriptor */
+ base = get_desc_base((unsigned long *)desc);
+
+ if (seg & (1<<2)) {
+ up(¤t->mm->context.sem);
+ } else
+ put_cpu();
+
+ /* Adjust EIP and segment limit, and clamp at the kernel limit.
+ It's legitimate for segments to wrap at 0xffffffff. */
+ seg_limit += base;
+ if (seg_limit < *eip_limit && seg_limit >= base)
+ *eip_limit = seg_limit;
+ return eip + base;
+}
+
+/*
+ * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
+ * Check that here and ignore it.
+ */
+static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
+{
+ unsigned long limit;
+ unsigned long instr = get_segment_eip (regs, &limit);
+ int scan_more = 1;
+ int prefetch = 0;
+ int i;
+
+ for (i = 0; scan_more && i < 15; i++) {
+ unsigned char opcode;
+ unsigned char instr_hi;
+ unsigned char instr_lo;
+
+ if (instr > limit)
+ break;
+ if (__get_user(opcode, (unsigned char *) instr))
+ break;
+
+ instr_hi = opcode & 0xf0;
+ instr_lo = opcode & 0x0f;
+ instr++;
+
+ switch (instr_hi) {
+ case 0x20:
+ case 0x30:
+ /* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes. */
+ scan_more = ((instr_lo & 7) == 0x6);
+ break;
+
+ case 0x60:
+ /* 0x64 thru 0x67 are valid prefixes in all modes. */
+ scan_more = (instr_lo & 0xC) == 0x4;
+ break;
+ case 0xF0:
+ /* 0xF0, 0xF2, and 0xF3 are valid prefixes */
+ scan_more = !instr_lo || (instr_lo>>1) == 1;
+ break;
+ case 0x00:
+ /* Prefetch instruction is 0x0F0D or 0x0F18 */
+ scan_more = 0;
+ if (instr > limit)
+ break;
+ if (__get_user(opcode, (unsigned char *) instr))
+ break;
+ prefetch = (instr_lo == 0xF) &&
+ (opcode == 0x0D || opcode == 0x18);
+ break;
+ default:
+ scan_more = 0;
+ break;
+ }
+ }
+ return prefetch;
+}
+
+static inline int is_prefetch(struct pt_regs *regs, unsigned long addr,
+ unsigned long error_code)
+{
+ if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 >= 6)) {
+ /* Catch an obscure case of prefetch inside an NX page. */
+ if (nx_enabled && (error_code & 16))
+ return 0;
+ return __is_prefetch(regs, addr);
+ }
+ return 0;
+}
+
+fastcall void do_invalid_op(struct pt_regs *, unsigned long);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ * bit 2 == 0 means kernel, 1 means user-mode
+ */
+fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct * vma;
+ unsigned long address;
+ unsigned long page;
+ int write;
+ siginfo_t info;
+
+ /* get the address */
+ __asm__("movl %%cr2,%0":"=r" (address));
+
+ if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14,
+ SIGSEGV) == NOTIFY_STOP)
+ return;
+ /* It's safe to allow irq's after cr2 has been saved */
+ if (regs->eflags & (X86_EFLAGS_IF|VM_MASK))
+ local_irq_enable();
+
+ tsk = current;
+
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * (error_code & 4) == 0, and that the fault was not a
+ * protection error (error_code & 1) == 0.
+ */
+ if (unlikely(address >= TASK_SIZE)) {
+ if (!(error_code & 5))
+ goto vmalloc_fault;
+ /*
+ * Don't take the mm semaphore here. If we fixup a prefetch
+ * fault we could otherwise deadlock.
+ */
+ goto bad_area_nosemaphore;
+ }
+
+ mm = tsk->mm;
+
+ /*
+ * If we're in an interrupt, have no user context or are running in an
+ * atomic region then we must not take the fault..
+ */
+ if (in_atomic() || !mm)
+ goto bad_area_nosemaphore;
+
+ /* When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunatly, in the case of an
+ * erroneous fault occuring in a code path which already holds mmap_sem
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibilty of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if ((error_code & 4) == 0 &&
+ !search_exception_tables(regs->eip))
+ goto bad_area_nosemaphore;
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+ if (error_code & 4) {
+ /*
+ * accessing the stack below %esp is always a bug.
+ * The "+ 32" is there due to some instructions (like
+ * pusha) doing post-decrement on the stack and that
+ * doesn't show up until later..
+ */
+ if (address + 32 < regs->esp)
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ info.si_code = SEGV_ACCERR;
+ write = 0;
+ switch (error_code & 3) {
+ default: /* 3: write, present */
+#ifdef TEST_VERIFY_AREA
+ if (regs->cs == KERNEL_CS)
+ printk("WP fault at %08lx\n", regs->eip);
+#endif
+ /* fall through */
+ case 2: /* write, not present */
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+ case 1: /* read, present */
+ goto bad_area;
+ case 0: /* read, not present */
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+
+ survive:
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ switch (handle_mm_fault(mm, vma, address, write)) {
+ case VM_FAULT_MINOR:
+ tsk->min_flt++;
+ break;
+ case VM_FAULT_MAJOR:
+ tsk->maj_flt++;
+ break;
+ case VM_FAULT_SIGBUS:
+ goto do_sigbus;
+ case VM_FAULT_OOM:
+ goto out_of_memory;
+ default:
+ BUG();
+ }
+
+ /*
+ * Did it hit the DOS screen memory VA from vm86 mode?
+ */
+ if (regs->eflags & VM_MASK) {
+ unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
+ if (bit < 32)
+ tsk->thread.screen_bitmap |= 1 << bit;
+ }
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ /* User mode accesses just cause a SIGSEGV */
+ if (error_code & 4) {
+ /*
+ * Valid to do another page fault here because this one came
+ * from user space.
+ */
+ if (is_prefetch(regs, address, error_code))
+ return;
+
+ tsk->thread.cr2 = address;
+ /* Kernel addresses are always protection faults */
+ tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+ tsk->thread.trap_no = 14;
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void __user *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+#ifdef CONFIG_X86_F00F_BUG
+ /*
+ * Pentium F0 0F C7 C8 bug workaround.
+ */
+ if (boot_cpu_data.f00f_bug) {
+ unsigned long nr;
+
+ nr = (address - idt_descr.address) >> 3;
+
+ if (nr == 6) {
+ do_invalid_op(regs, 0);
+ return;
+ }
+ }
+#endif
+
+no_context:
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+ /*
+ * Valid to do another page fault here, because if this fault
+ * had been triggered by is_prefetch fixup_exception would have
+ * handled it.
+ */
+ if (is_prefetch(regs, address, error_code))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+#ifdef CONFIG_X86_PAE
+ if (error_code & 16) {
+ pte_t *pte = lookup_address(address);
+
+ if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
+ printk(KERN_CRIT "kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", current->uid);
+ }
+#endif
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n",address);
+ printk(KERN_ALERT " printing eip:\n");
+ printk("%08lx\n", regs->eip);
+ asm("movl %%cr3,%0":"=r" (page));
+ page = ((unsigned long *) __va(page))[address >> 22];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ /*
+ * We must not directly access the pte in the highpte
+ * case, the page table might be allocated in highmem.
+ * And lets rather not kmap-atomic the pte, just in case
+ * it's allocated already.
+ */
+#ifndef CONFIG_HIGHPTE
+ if (page & 1) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
+#endif
+ die("Oops", regs, error_code);
+ bust_spinlocks(0);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ if (tsk->pid == 1) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ printk("VM: killing process %s\n", tsk->comm);
+ if (error_code & 4)
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!(error_code & 4))
+ goto no_context;
+
+ /* User space => ok to do another page fault */
+ if (is_prefetch(regs, address, error_code))
+ return;
+
+ tsk->thread.cr2 = address;
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = 14;
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void __user *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int index = pgd_index(address);
+ unsigned long pgd_paddr;
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ asm("movl %%cr3,%0":"=r" (pgd_paddr));
+ pgd = index + (pgd_t *)__va(pgd_paddr);
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+
+ /*
+ * set_pgd(pgd, *pgd_k); here would be useless on PAE
+ * and redundant with the set_pmd() on non-PAE. As would
+ * set_pud.
+ */
+
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+ return;
+ }
+}
diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c
new file mode 100644
index 0000000..fc4c4ca
--- /dev/null
+++ b/arch/i386/mm/highmem.c
@@ -0,0 +1,89 @@
+#include <linux/highmem.h>
+
+void *kmap(struct page *page)
+{
+ might_sleep();
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+
+void kunmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+
+/*
+ * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
+ * no global lock is needed and because the kmap code must perform a global TLB
+ * invalidation when the kmap pool wraps.
+ *
+ * However when holding an atomic kmap is is not legal to sleep, so atomic
+ * kmaps are appropriate for short, tight code paths only.
+ */
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ inc_preempt_count();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ if (!pte_none(*(kmap_pte-idx)))
+ BUG();
+#endif
+ set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+ __flush_tlb_one(vaddr);
+
+ return (void*) vaddr;
+}
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < FIXADDR_START) { // FIXME
+ dec_preempt_count();
+ preempt_check_resched();
+ return;
+ }
+
+ if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN+idx))
+ BUG();
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ __flush_tlb_one(vaddr);
+#endif
+
+ dec_preempt_count();
+ preempt_check_resched();
+}
+
+struct page *kmap_atomic_to_page(void *ptr)
+{
+ unsigned long idx, vaddr = (unsigned long)ptr;
+ pte_t *pte;
+
+ if (vaddr < FIXADDR_START)
+ return virt_to_page(ptr);
+
+ idx = virt_to_fix(vaddr);
+ pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
+ return pte_page(*pte);
+}
+
diff --git a/arch/i386/mm/hugetlbpage.c b/arch/i386/mm/hugetlbpage.c
new file mode 100644
index 0000000..a8c4514
--- /dev/null
+++ b/arch/i386/mm/hugetlbpage.c
@@ -0,0 +1,431 @@
+/*
+ * IA-32 Huge TLB Page Support for Kernel.
+ *
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/smp_lock.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sysctl.h>
+#include <asm/mman.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ pmd = pmd_alloc(mm, pud, addr);
+ return (pte_t *) pmd;
+}
+
+static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
+ return (pte_t *) pmd;
+}
+
+static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, struct page *page, pte_t * page_table, int write_access)
+{
+ pte_t entry;
+
+ add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
+ if (write_access) {
+ entry =
+ pte_mkwrite(pte_mkdirty(mk_pte(page, vma->vm_page_prot)));
+ } else
+ entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot));
+ entry = pte_mkyoung(entry);
+ mk_pte_huge(entry);
+ set_pte(page_table, entry);
+}
+
+/*
+ * This function checks for proper alignment of input addr and len parameters.
+ */
+int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
+{
+ if (len & ~HPAGE_MASK)
+ return -EINVAL;
+ if (addr & ~HPAGE_MASK)
+ return -EINVAL;
+ return 0;
+}
+
+int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
+ struct vm_area_struct *vma)
+{
+ pte_t *src_pte, *dst_pte, entry;
+ struct page *ptepage;
+ unsigned long addr = vma->vm_start;
+ unsigned long end = vma->vm_end;
+
+ while (addr < end) {
+ dst_pte = huge_pte_alloc(dst, addr);
+ if (!dst_pte)
+ goto nomem;
+ src_pte = huge_pte_offset(src, addr);
+ entry = *src_pte;
+ ptepage = pte_page(entry);
+ get_page(ptepage);
+ set_pte(dst_pte, entry);
+ add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
+ addr += HPAGE_SIZE;
+ }
+ return 0;
+
+nomem:
+ return -ENOMEM;
+}
+
+int
+follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ struct page **pages, struct vm_area_struct **vmas,
+ unsigned long *position, int *length, int i)
+{
+ unsigned long vpfn, vaddr = *position;
+ int remainder = *length;
+
+ WARN_ON(!is_vm_hugetlb_page(vma));
+
+ vpfn = vaddr/PAGE_SIZE;
+ while (vaddr < vma->vm_end && remainder) {
+
+ if (pages) {
+ pte_t *pte;
+ struct page *page;
+
+ pte = huge_pte_offset(mm, vaddr);
+
+ /* hugetlb should be locked, and hence, prefaulted */
+ WARN_ON(!pte || pte_none(*pte));
+
+ page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
+
+ WARN_ON(!PageCompound(page));
+
+ get_page(page);
+ pages[i] = page;
+ }
+
+ if (vmas)
+ vmas[i] = vma;
+
+ vaddr += PAGE_SIZE;
+ ++vpfn;
+ --remainder;
+ ++i;
+ }
+
+ *length = remainder;
+ *position = vaddr;
+
+ return i;
+}
+
+#if 0 /* This is just for testing */
+struct page *
+follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
+{
+ unsigned long start = address;
+ int length = 1;
+ int nr;
+ struct page *page;
+ struct vm_area_struct *vma;
+
+ vma = find_vma(mm, addr);
+ if (!vma || !is_vm_hugetlb_page(vma))
+ return ERR_PTR(-EINVAL);
+
+ pte = huge_pte_offset(mm, address);
+
+ /* hugetlb should be locked, and hence, prefaulted */
+ WARN_ON(!pte || pte_none(*pte));
+
+ page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
+
+ WARN_ON(!PageCompound(page));
+
+ return page;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return 0;
+}
+
+struct page *
+follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ return NULL;
+}
+
+#else
+
+struct page *
+follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return !!(pmd_val(pmd) & _PAGE_PSE);
+}
+
+struct page *
+follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ struct page *page;
+
+ page = pte_page(*(pte_t *)pmd);
+ if (page)
+ page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+ return page;
+}
+#endif
+
+void unmap_hugepage_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ unsigned long address;
+ pte_t pte, *ptep;
+ struct page *page;
+
+ BUG_ON(start & (HPAGE_SIZE - 1));
+ BUG_ON(end & (HPAGE_SIZE - 1));
+
+ for (address = start; address < end; address += HPAGE_SIZE) {
+ ptep = huge_pte_offset(mm, address);
+ if (!ptep)
+ continue;
+ pte = ptep_get_and_clear(mm, address, ptep);
+ if (pte_none(pte))
+ continue;
+ page = pte_page(pte);
+ put_page(page);
+ }
+ add_mm_counter(mm ,rss, -((end - start) >> PAGE_SHIFT));
+ flush_tlb_range(vma, start, end);
+}
+
+int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr;
+ int ret = 0;
+
+ BUG_ON(vma->vm_start & ~HPAGE_MASK);
+ BUG_ON(vma->vm_end & ~HPAGE_MASK);
+
+ spin_lock(&mm->page_table_lock);
+ for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
+ unsigned long idx;
+ pte_t *pte = huge_pte_alloc(mm, addr);
+ struct page *page;
+
+ if (!pte) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (!pte_none(*pte)) {
+ pmd_t *pmd = (pmd_t *) pte;
+
+ page = pmd_page(*pmd);
+ pmd_clear(pmd);
+ mm->nr_ptes--;
+ dec_page_state(nr_page_table_pages);
+ page_cache_release(page);
+ }
+
+ idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
+ + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+ page = find_get_page(mapping, idx);
+ if (!page) {
+ /* charge the fs quota first */
+ if (hugetlb_get_quota(mapping)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ page = alloc_huge_page();
+ if (!page) {
+ hugetlb_put_quota(mapping);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
+ if (! ret) {
+ unlock_page(page);
+ } else {
+ hugetlb_put_quota(mapping);
+ free_huge_page(page);
+ goto out;
+ }
+ }
+ set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE);
+ }
+out:
+ spin_unlock(&mm->page_table_lock);
+ return ret;
+}
+
+/* x86_64 also uses this file */
+
+#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
+ unsigned long addr, unsigned long len,
+ unsigned long pgoff, unsigned long flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ unsigned long start_addr;
+
+ start_addr = mm->free_area_cache;
+
+full_search:
+ addr = ALIGN(start_addr, HPAGE_SIZE);
+
+ for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
+ /* At this point: (!vma || addr < vma->vm_end). */
+ if (TASK_SIZE - len < addr) {
+ /*
+ * Start a new search - just in case we missed
+ * some holes.
+ */
+ if (start_addr != TASK_UNMAPPED_BASE) {
+ start_addr = TASK_UNMAPPED_BASE;
+ goto full_search;
+ }
+ return -ENOMEM;
+ }
+ if (!vma || addr + len <= vma->vm_start) {
+ mm->free_area_cache = addr + len;
+ return addr;
+ }
+ addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+ }
+}
+
+static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
+ unsigned long addr0, unsigned long len,
+ unsigned long pgoff, unsigned long flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma, *prev_vma;
+ unsigned long base = mm->mmap_base, addr = addr0;
+ int first_time = 1;
+
+ /* don't allow allocations above current base */
+ if (mm->free_area_cache > base)
+ mm->free_area_cache = base;
+
+try_again:
+ /* make sure it can fit in the remaining address space */
+ if (mm->free_area_cache < len)
+ goto fail;
+
+ /* either no address requested or cant fit in requested address hole */
+ addr = (mm->free_area_cache - len) & HPAGE_MASK;
+ do {
+ /*
+ * Lookup failure means no vma is above this address,
+ * i.e. return with success:
+ */
+ if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+ return addr;
+
+ /*
+ * new region fits between prev_vma->vm_end and
+ * vma->vm_start, use it:
+ */
+ if (addr + len <= vma->vm_start &&
+ (!prev_vma || (addr >= prev_vma->vm_end)))
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr);
+ else
+ /* pull free_area_cache down to the first hole */
+ if (mm->free_area_cache == vma->vm_end)
+ mm->free_area_cache = vma->vm_start;
+
+ /* try just below the current vma->vm_start */
+ addr = (vma->vm_start - len) & HPAGE_MASK;
+ } while (len <= vma->vm_start);
+
+fail:
+ /*
+ * if hint left us with no space for the requested
+ * mapping then try again:
+ */
+ if (first_time) {
+ mm->free_area_cache = base;
+ first_time = 0;
+ goto try_again;
+ }
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
+ addr = hugetlb_get_unmapped_area_bottomup(file, addr0,
+ len, pgoff, flags);
+
+ /*
+ * Restore the topdown base:
+ */
+ mm->free_area_cache = base;
+
+ return addr;
+}
+
+unsigned long
+hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+
+ if (len & ~HPAGE_MASK)
+ return -EINVAL;
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (addr) {
+ addr = ALIGN(addr, HPAGE_SIZE);
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+ if (mm->get_unmapped_area == arch_get_unmapped_area)
+ return hugetlb_get_unmapped_area_bottomup(file, addr, len,
+ pgoff, flags);
+ else
+ return hugetlb_get_unmapped_area_topdown(file, addr, len,
+ pgoff, flags);
+}
+
+#endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
+
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
new file mode 100644
index 0000000..7a7ea37
--- /dev/null
+++ b/arch/i386/mm/init.c
@@ -0,0 +1,696 @@
+/*
+ * linux/arch/i386/mm/init.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/efi.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/dma.h>
+#include <asm/fixmap.h>
+#include <asm/e820.h>
+#include <asm/apic.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+
+unsigned int __VMALLOC_RESERVE = 128 << 20;
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+unsigned long highstart_pfn, highend_pfn;
+
+static int noinline do_test_wp_bit(void);
+
+/*
+ * Creates a middle page table and puts a pointer to it in the
+ * given global directory entry. This only returns the gd entry
+ * in non-PAE compilation mode, since the middle layer is folded.
+ */
+static pmd_t * __init one_md_table_init(pgd_t *pgd)
+{
+ pud_t *pud;
+ pmd_t *pmd_table;
+
+#ifdef CONFIG_X86_PAE
+ pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
+ pud = pud_offset(pgd, 0);
+ if (pmd_table != pmd_offset(pud, 0))
+ BUG();
+#else
+ pud = pud_offset(pgd, 0);
+ pmd_table = pmd_offset(pud, 0);
+#endif
+
+ return pmd_table;
+}
+
+/*
+ * Create a page table and place a pointer to it in a middle page
+ * directory entry.
+ */
+static pte_t * __init one_page_table_init(pmd_t *pmd)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
+ if (page_table != pte_offset_kernel(pmd, 0))
+ BUG();
+
+ return page_table;
+ }
+
+ return pte_offset_kernel(pmd, 0);
+}
+
+/*
+ * This function initializes a certain range of kernel virtual memory
+ * with new bootmem page tables, everywhere page tables are missing in
+ * the given range.
+ */
+
+/*
+ * NOTE: The pagetables are allocated contiguous on the physical space
+ * so we can cache the place of the first one and move around without
+ * checking the pgd every time.
+ */
+static void __init page_table_range_init (unsigned long start, unsigned long end, pgd_t *pgd_base)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ int pgd_idx, pmd_idx;
+ unsigned long vaddr;
+
+ vaddr = start;
+ pgd_idx = pgd_index(vaddr);
+ pmd_idx = pmd_index(vaddr);
+ pgd = pgd_base + pgd_idx;
+
+ for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
+ if (pgd_none(*pgd))
+ one_md_table_init(pgd);
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end); pmd++, pmd_idx++) {
+ if (pmd_none(*pmd))
+ one_page_table_init(pmd);
+
+ vaddr += PMD_SIZE;
+ }
+ pmd_idx = 0;
+ }
+}
+
+static inline int is_kernel_text(unsigned long addr)
+{
+ if (addr >= PAGE_OFFSET && addr <= (unsigned long)__init_end)
+ return 1;
+ return 0;
+}
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET.
+ */
+static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
+{
+ unsigned long pfn;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int pgd_idx, pmd_idx, pte_ofs;
+
+ pgd_idx = pgd_index(PAGE_OFFSET);
+ pgd = pgd_base + pgd_idx;
+ pfn = 0;
+
+ for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
+ pmd = one_md_table_init(pgd);
+ if (pfn >= max_low_pfn)
+ continue;
+ for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD && pfn < max_low_pfn; pmd++, pmd_idx++) {
+ unsigned int address = pfn * PAGE_SIZE + PAGE_OFFSET;
+
+ /* Map with big pages if possible, otherwise create normal page tables. */
+ if (cpu_has_pse) {
+ unsigned int address2 = (pfn + PTRS_PER_PTE - 1) * PAGE_SIZE + PAGE_OFFSET + PAGE_SIZE-1;
+
+ if (is_kernel_text(address) || is_kernel_text(address2))
+ set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE_EXEC));
+ else
+ set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE));
+ pfn += PTRS_PER_PTE;
+ } else {
+ pte = one_page_table_init(pmd);
+
+ for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE && pfn < max_low_pfn; pte++, pfn++, pte_ofs++) {
+ if (is_kernel_text(address))
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+ else
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL));
+ }
+ }
+ }
+ }
+}
+
+static inline int page_kills_ppro(unsigned long pagenr)
+{
+ if (pagenr >= 0x70000 && pagenr <= 0x7003F)
+ return 1;
+ return 0;
+}
+
+extern int is_available_memory(efi_memory_desc_t *);
+
+static inline int page_is_ram(unsigned long pagenr)
+{
+ int i;
+ unsigned long addr, end;
+
+ if (efi_enabled) {
+ efi_memory_desc_t *md;
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+ if (!is_available_memory(md))
+ continue;
+ addr = (md->phys_addr+PAGE_SIZE-1) >> PAGE_SHIFT;
+ end = (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) >> PAGE_SHIFT;
+
+ if ((pagenr >= addr) && (pagenr < end))
+ return 1;
+ }
+ return 0;
+ }
+
+ for (i = 0; i < e820.nr_map; i++) {
+
+ if (e820.map[i].type != E820_RAM) /* not usable memory */
+ continue;
+ /*
+ * !!!FIXME!!! Some BIOSen report areas as RAM that
+ * are not. Notably the 640->1Mb area. We need a sanity
+ * check here.
+ */
+ addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT;
+ end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT;
+ if ((pagenr >= addr) && (pagenr < end))
+ return 1;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_HIGHMEM
+pte_t *kmap_pte;
+pgprot_t kmap_prot;
+
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), vaddr), (vaddr)), (vaddr))
+
+static void __init kmap_init(void)
+{
+ unsigned long kmap_vstart;
+
+ /* cache the first kmap pte */
+ kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+ kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+
+ kmap_prot = PAGE_KERNEL;
+}
+
+static void __init permanent_kmaps_init(pgd_t *pgd_base)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long vaddr;
+
+ vaddr = PKMAP_BASE;
+ page_table_range_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ pte = pte_offset_kernel(pmd, vaddr);
+ pkmap_page_table = pte;
+}
+
+void __init one_highpage_init(struct page *page, int pfn, int bad_ppro)
+{
+ if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
+ ClearPageReserved(page);
+ set_bit(PG_highmem, &page->flags);
+ set_page_count(page, 1);
+ __free_page(page);
+ totalhigh_pages++;
+ } else
+ SetPageReserved(page);
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+static void __init set_highmem_pages_init(int bad_ppro)
+{
+ int pfn;
+ for (pfn = highstart_pfn; pfn < highend_pfn; pfn++)
+ one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
+ totalram_pages += totalhigh_pages;
+}
+#else
+extern void set_highmem_pages_init(int);
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#else
+#define kmap_init() do { } while (0)
+#define permanent_kmaps_init(pgd_base) do { } while (0)
+#define set_highmem_pages_init(bad_ppro) do { } while (0)
+#endif /* CONFIG_HIGHMEM */
+
+unsigned long long __PAGE_KERNEL = _PAGE_KERNEL;
+unsigned long long __PAGE_KERNEL_EXEC = _PAGE_KERNEL_EXEC;
+
+#ifndef CONFIG_DISCONTIGMEM
+#define remap_numa_kva() do {} while (0)
+#else
+extern void __init remap_numa_kva(void);
+#endif
+
+static void __init pagetable_init (void)
+{
+ unsigned long vaddr;
+ pgd_t *pgd_base = swapper_pg_dir;
+
+#ifdef CONFIG_X86_PAE
+ int i;
+ /* Init entries of the first-level page table to the zero page */
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ set_pgd(pgd_base + i, __pgd(__pa(empty_zero_page) | _PAGE_PRESENT));
+#endif
+
+ /* Enable PSE if available */
+ if (cpu_has_pse) {
+ set_in_cr4(X86_CR4_PSE);
+ }
+
+ /* Enable PGE if available */
+ if (cpu_has_pge) {
+ set_in_cr4(X86_CR4_PGE);
+ __PAGE_KERNEL |= _PAGE_GLOBAL;
+ __PAGE_KERNEL_EXEC |= _PAGE_GLOBAL;
+ }
+
+ kernel_physical_mapping_init(pgd_base);
+ remap_numa_kva();
+
+ /*
+ * Fixed mappings, only the page table structure has to be
+ * created - mappings will be set by set_fixmap():
+ */
+ vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+ page_table_range_init(vaddr, 0, pgd_base);
+
+ permanent_kmaps_init(pgd_base);
+
+#ifdef CONFIG_X86_PAE
+ /*
+ * Add low memory identity-mappings - SMP needs it when
+ * starting up on an AP from real-mode. In the non-PAE
+ * case we already have these mappings through head.S.
+ * All user-space mappings are explicitly cleared after
+ * SMP startup.
+ */
+ pgd_base[0] = pgd_base[USER_PTRS_PER_PGD];
+#endif
+}
+
+#if defined(CONFIG_PM_DISK) || defined(CONFIG_SOFTWARE_SUSPEND)
+/*
+ * Swap suspend & friends need this for resume because things like the intel-agp
+ * driver might have split up a kernel 4MB mapping.
+ */
+char __nosavedata swsusp_pg_dir[PAGE_SIZE]
+ __attribute__ ((aligned (PAGE_SIZE)));
+
+static inline void save_pg_dir(void)
+{
+ memcpy(swsusp_pg_dir, swapper_pg_dir, PAGE_SIZE);
+}
+#else
+static inline void save_pg_dir(void)
+{
+}
+#endif
+
+void zap_low_mappings (void)
+{
+ int i;
+
+ save_pg_dir();
+
+ /*
+ * Zap initial low-memory mappings.
+ *
+ * Note that "pgd_clear()" doesn't do it for
+ * us, because pgd_clear() is a no-op on i386.
+ */
+ for (i = 0; i < USER_PTRS_PER_PGD; i++)
+#ifdef CONFIG_X86_PAE
+ set_pgd(swapper_pg_dir+i, __pgd(1 + __pa(empty_zero_page)));
+#else
+ set_pgd(swapper_pg_dir+i, __pgd(0));
+#endif
+ flush_tlb_all();
+}
+
+static int disable_nx __initdata = 0;
+u64 __supported_pte_mask = ~_PAGE_NX;
+
+/*
+ * noexec = on|off
+ *
+ * Control non executable mappings.
+ *
+ * on Enable
+ * off Disable
+ */
+void __init noexec_setup(const char *str)
+{
+ if (!strncmp(str, "on",2) && cpu_has_nx) {
+ __supported_pte_mask |= _PAGE_NX;
+ disable_nx = 0;
+ } else if (!strncmp(str,"off",3)) {
+ disable_nx = 1;
+ __supported_pte_mask &= ~_PAGE_NX;
+ }
+}
+
+int nx_enabled = 0;
+#ifdef CONFIG_X86_PAE
+
+static void __init set_nx(void)
+{
+ unsigned int v[4], l, h;
+
+ if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+ cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+ if ((v[3] & (1 << 20)) && !disable_nx) {
+ rdmsr(MSR_EFER, l, h);
+ l |= EFER_NX;
+ wrmsr(MSR_EFER, l, h);
+ nx_enabled = 1;
+ __supported_pte_mask |= _PAGE_NX;
+ }
+ }
+}
+
+/*
+ * Enables/disables executability of a given kernel page and
+ * returns the previous setting.
+ */
+int __init set_kernel_exec(unsigned long vaddr, int enable)
+{
+ pte_t *pte;
+ int ret = 1;
+
+ if (!nx_enabled)
+ goto out;
+
+ pte = lookup_address(vaddr);
+ BUG_ON(!pte);
+
+ if (!pte_exec_kernel(*pte))
+ ret = 0;
+
+ if (enable)
+ pte->pte_high &= ~(1 << (_PAGE_BIT_NX - 32));
+ else
+ pte->pte_high |= 1 << (_PAGE_BIT_NX - 32);
+ __flush_tlb_all();
+out:
+ return ret;
+}
+
+#endif
+
+/*
+ * paging_init() sets up the page tables - note that the first 8MB are
+ * already mapped by head.S.
+ *
+ * This routines also unmaps the page at virtual kernel address 0, so
+ * that we can trap those pesky NULL-reference errors in the kernel.
+ */
+void __init paging_init(void)
+{
+#ifdef CONFIG_X86_PAE
+ set_nx();
+ if (nx_enabled)
+ printk("NX (Execute Disable) protection: active\n");
+#endif
+
+ pagetable_init();
+
+ load_cr3(swapper_pg_dir);
+
+#ifdef CONFIG_X86_PAE
+ /*
+ * We will bail out later - printk doesn't work right now so
+ * the user would just see a hanging kernel.
+ */
+ if (cpu_has_pae)
+ set_in_cr4(X86_CR4_PAE);
+#endif
+ __flush_tlb_all();
+
+ kmap_init();
+}
+
+/*
+ * Test if the WP bit works in supervisor mode. It isn't supported on 386's
+ * and also on some strange 486's (NexGen etc.). All 586+'s are OK. This
+ * used to involve black magic jumps to work around some nasty CPU bugs,
+ * but fortunately the switch to using exceptions got rid of all that.
+ */
+
+static void __init test_wp_bit(void)
+{
+ printk("Checking if this processor honours the WP bit even in supervisor mode... ");
+
+ /* Any page-aligned address will do, the test is non-destructive */
+ __set_fixmap(FIX_WP_TEST, __pa(&swapper_pg_dir), PAGE_READONLY);
+ boot_cpu_data.wp_works_ok = do_test_wp_bit();
+ clear_fixmap(FIX_WP_TEST);
+
+ if (!boot_cpu_data.wp_works_ok) {
+ printk("No.\n");
+#ifdef CONFIG_X86_WP_WORKS_OK
+ panic("This kernel doesn't support CPU's with broken WP. Recompile it for a 386!");
+#endif
+ } else {
+ printk("Ok.\n");
+ }
+}
+
+static void __init set_max_mapnr_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+ num_physpages = highend_pfn;
+#else
+ num_physpages = max_low_pfn;
+#endif
+#ifndef CONFIG_DISCONTIGMEM
+ max_mapnr = num_physpages;
+#endif
+}
+
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
+void __init mem_init(void)
+{
+ extern int ppro_with_ram_bug(void);
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+ int bad_ppro;
+
+#ifndef CONFIG_DISCONTIGMEM
+ if (!mem_map)
+ BUG();
+#endif
+
+ bad_ppro = ppro_with_ram_bug();
+
+#ifdef CONFIG_HIGHMEM
+ /* check that fixmap and pkmap do not overlap */
+ if (PKMAP_BASE+LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) {
+ printk(KERN_ERR "fixmap and kmap areas overlap - this will crash\n");
+ printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n",
+ PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE, FIXADDR_START);
+ BUG();
+ }
+#endif
+
+ set_max_mapnr_init();
+
+#ifdef CONFIG_HIGHMEM
+ high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < max_low_pfn; tmp++)
+ /*
+ * Only count reserved RAM pages
+ */
+ if (page_is_ram(tmp) && PageReserved(pfn_to_page(tmp)))
+ reservedpages++;
+
+ set_highmem_pages_init(bad_ppro);
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_text;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+ kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+ VMALLOC_END-VMALLOC_START);
+
+ printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init, %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT-10),
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
+ );
+
+#ifdef CONFIG_X86_PAE
+ if (!cpu_has_pae)
+ panic("cannot execute a PAE-enabled kernel on a PAE-less CPU!");
+#endif
+ if (boot_cpu_data.wp_works_ok < 0)
+ test_wp_bit();
+
+ /*
+ * Subtle. SMP is doing it's boot stuff late (because it has to
+ * fork idle threads) - but it also needs low mappings for the
+ * protected-mode entry to work. We zap these entries only after
+ * the WP-bit has been tested.
+ */
+#ifndef CONFIG_SMP
+ zap_low_mappings();
+#endif
+}
+
+kmem_cache_t *pgd_cache;
+kmem_cache_t *pmd_cache;
+
+void __init pgtable_cache_init(void)
+{
+ if (PTRS_PER_PMD > 1) {
+ pmd_cache = kmem_cache_create("pmd",
+ PTRS_PER_PMD*sizeof(pmd_t),
+ PTRS_PER_PMD*sizeof(pmd_t),
+ 0,
+ pmd_ctor,
+ NULL);
+ if (!pmd_cache)
+ panic("pgtable_cache_init(): cannot create pmd cache");
+ }
+ pgd_cache = kmem_cache_create("pgd",
+ PTRS_PER_PGD*sizeof(pgd_t),
+ PTRS_PER_PGD*sizeof(pgd_t),
+ 0,
+ pgd_ctor,
+ PTRS_PER_PMD == 1 ? pgd_dtor : NULL);
+ if (!pgd_cache)
+ panic("pgtable_cache_init(): Cannot create pgd cache");
+}
+
+/*
+ * This function cannot be __init, since exceptions don't work in that
+ * section. Put this after the callers, so that it cannot be inlined.
+ */
+static int noinline do_test_wp_bit(void)
+{
+ char tmp_reg;
+ int flag;
+
+ __asm__ __volatile__(
+ " movb %0,%1 \n"
+ "1: movb %1,%0 \n"
+ " xorl %2,%2 \n"
+ "2: \n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4 \n"
+ " .long 1b,2b \n"
+ ".previous \n"
+ :"=m" (*(char *)fix_to_virt(FIX_WP_TEST)),
+ "=q" (tmp_reg),
+ "=r" (flag)
+ :"2" (1)
+ :"memory");
+
+ return flag;
+}
+
+void free_initmem(void)
+{
+ unsigned long addr;
+
+ addr = (unsigned long)(&__init_begin);
+ for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ set_page_count(virt_to_page(addr), 1);
+ memset((void *)addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (__init_end - __init_begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (start < end)
+ printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ set_page_count(virt_to_page(start), 1);
+ free_page(start);
+ totalram_pages++;
+ }
+}
+#endif
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
new file mode 100644
index 0000000..db06f73
--- /dev/null
+++ b/arch/i386/mm/ioremap.c
@@ -0,0 +1,320 @@
+/*
+ * arch/i386/mm/ioremap.c
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ * This is needed for high PCI addresses that aren't mapped in the
+ * 640k-1MB IO memory area on PC's
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/fixmap.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#define ISA_START_ADDRESS 0xa0000
+#define ISA_END_ADDRESS 0x100000
+
+static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, unsigned long flags)
+{
+ pte_t *pte;
+ unsigned long pfn;
+
+ pfn = phys_addr >> PAGE_SHIFT;
+ pte = pte_alloc_kernel(&init_mm, pmd, addr);
+ if (!pte)
+ return -ENOMEM;
+ do {
+ BUG_ON(!pte_none(*pte));
+ set_pte(pte, pfn_pte(pfn, __pgprot(_PAGE_PRESENT | _PAGE_RW |
+ _PAGE_DIRTY | _PAGE_ACCESSED | flags)));
+ pfn++;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+ return 0;
+}
+
+static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, unsigned long flags)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ phys_addr -= addr;
+ pmd = pmd_alloc(&init_mm, pud, addr);
+ if (!pmd)
+ return -ENOMEM;
+ do {
+ next = pmd_addr_end(addr, end);
+ if (ioremap_pte_range(pmd, addr, next, phys_addr + addr, flags))
+ return -ENOMEM;
+ } while (pmd++, addr = next, addr != end);
+ return 0;
+}
+
+static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, unsigned long flags)
+{
+ pud_t *pud;
+ unsigned long next;
+
+ phys_addr -= addr;
+ pud = pud_alloc(&init_mm, pgd, addr);
+ if (!pud)
+ return -ENOMEM;
+ do {
+ next = pud_addr_end(addr, end);
+ if (ioremap_pmd_range(pud, addr, next, phys_addr + addr, flags))
+ return -ENOMEM;
+ } while (pud++, addr = next, addr != end);
+ return 0;
+}
+
+static int ioremap_page_range(unsigned long addr,
+ unsigned long end, unsigned long phys_addr, unsigned long flags)
+{
+ pgd_t *pgd;
+ unsigned long next;
+ int err;
+
+ BUG_ON(addr >= end);
+ flush_cache_all();
+ phys_addr -= addr;
+ pgd = pgd_offset_k(addr);
+ spin_lock(&init_mm.page_table_lock);
+ do {
+ next = pgd_addr_end(addr, end);
+ err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, flags);
+ if (err)
+ break;
+ } while (pgd++, addr = next, addr != end);
+ spin_unlock(&init_mm.page_table_lock);
+ flush_tlb_all();
+ return err;
+}
+
+/*
+ * Generic mapping function (not visible outside):
+ */
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+{
+ void __iomem * addr;
+ struct vm_struct * area;
+ unsigned long offset, last_addr;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Don't remap the low PCI/ISA area, it's always mapped..
+ */
+ if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS)
+ return (void __iomem *) phys_to_virt(phys_addr);
+
+ /*
+ * Don't allow anybody to remap normal RAM that we're using..
+ */
+ if (phys_addr <= virt_to_phys(high_memory - 1)) {
+ char *t_addr, *t_end;
+ struct page *page;
+
+ t_addr = __va(phys_addr);
+ t_end = t_addr + (size - 1);
+
+ for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++)
+ if(!PageReserved(page))
+ return NULL;
+ }
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+ /*
+ * Ok, go for it..
+ */
+ area = get_vm_area(size, VM_IOREMAP | (flags << 20));
+ if (!area)
+ return NULL;
+ area->phys_addr = phys_addr;
+ addr = (void __iomem *) area->addr;
+ if (ioremap_page_range((unsigned long) addr,
+ (unsigned long) addr + size, phys_addr, flags)) {
+ vunmap((void __force *) addr);
+ return NULL;
+ }
+ return (void __iomem *) (offset + (char __iomem *)addr);
+}
+
+
+/**
+ * ioremap_nocache - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In particular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ *
+ * Must be freed with iounmap.
+ */
+
+void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size)
+{
+ unsigned long last_addr;
+ void __iomem *p = __ioremap(phys_addr, size, _PAGE_PCD);
+ if (!p)
+ return p;
+
+ /* Guaranteed to be > phys_addr, as per __ioremap() */
+ last_addr = phys_addr + size - 1;
+
+ if (last_addr < virt_to_phys(high_memory) - 1) {
+ struct page *ppage = virt_to_page(__va(phys_addr));
+ unsigned long npages;
+
+ phys_addr &= PAGE_MASK;
+
+ /* This might overflow and become zero.. */
+ last_addr = PAGE_ALIGN(last_addr);
+
+ /* .. but that's ok, because modulo-2**n arithmetic will make
+ * the page-aligned "last - first" come out right.
+ */
+ npages = (last_addr - phys_addr) >> PAGE_SHIFT;
+
+ if (change_page_attr(ppage, npages, PAGE_KERNEL_NOCACHE) < 0) {
+ iounmap(p);
+ p = NULL;
+ }
+ global_flush_tlb();
+ }
+
+ return p;
+}
+
+void iounmap(volatile void __iomem *addr)
+{
+ struct vm_struct *p;
+ if ((void __force *) addr <= high_memory)
+ return;
+
+ /*
+ * __ioremap special-cases the PCI/ISA range by not instantiating a
+ * vm_area and by simply returning an address into the kernel mapping
+ * of ISA space. So handle that here.
+ */
+ if (addr >= phys_to_virt(ISA_START_ADDRESS) &&
+ addr < phys_to_virt(ISA_END_ADDRESS))
+ return;
+
+ p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+ if (!p) {
+ printk("__iounmap: bad address %p\n", addr);
+ return;
+ }
+
+ if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) {
+ /* p->size includes the guard page, but cpa doesn't like that */
+ change_page_attr(virt_to_page(__va(p->phys_addr)),
+ p->size >> PAGE_SHIFT,
+ PAGE_KERNEL);
+ global_flush_tlb();
+ }
+ kfree(p);
+}
+
+void __init *bt_ioremap(unsigned long phys_addr, unsigned long size)
+{
+ unsigned long offset, last_addr;
+ unsigned int nrpages;
+ enum fixed_addresses idx;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Don't remap the low PCI/ISA area, it's always mapped..
+ */
+ if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS)
+ return phys_to_virt(phys_addr);
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr) - phys_addr;
+
+ /*
+ * Mappings have to fit in the FIX_BTMAP area.
+ */
+ nrpages = size >> PAGE_SHIFT;
+ if (nrpages > NR_FIX_BTMAPS)
+ return NULL;
+
+ /*
+ * Ok, go for it..
+ */
+ idx = FIX_BTMAP_BEGIN;
+ while (nrpages > 0) {
+ set_fixmap(idx, phys_addr);
+ phys_addr += PAGE_SIZE;
+ --idx;
+ --nrpages;
+ }
+ return (void*) (offset + fix_to_virt(FIX_BTMAP_BEGIN));
+}
+
+void __init bt_iounmap(void *addr, unsigned long size)
+{
+ unsigned long virt_addr;
+ unsigned long offset;
+ unsigned int nrpages;
+ enum fixed_addresses idx;
+
+ virt_addr = (unsigned long)addr;
+ if (virt_addr < fix_to_virt(FIX_BTMAP_BEGIN))
+ return;
+ offset = virt_addr & ~PAGE_MASK;
+ nrpages = PAGE_ALIGN(offset + size - 1) >> PAGE_SHIFT;
+
+ idx = FIX_BTMAP_BEGIN;
+ while (nrpages > 0) {
+ clear_fixmap(idx);
+ --idx;
+ --nrpages;
+ }
+}
diff --git a/arch/i386/mm/mmap.c b/arch/i386/mm/mmap.c
new file mode 100644
index 0000000..e4730a1
--- /dev/null
+++ b/arch/i386/mm/mmap.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/i386/mm/mmap.c
+ *
+ * flexible mmap layout support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Started by Ingo Molnar <mingo@elte.hu>
+ */
+
+#include <linux/personality.h>
+#include <linux/mm.h>
+#include <linux/random.h>
+
+/*
+ * Top of mmap area (just below the process stack).
+ *
+ * Leave an at least ~128 MB hole.
+ */
+#define MIN_GAP (128*1024*1024)
+#define MAX_GAP (TASK_SIZE/6*5)
+
+static inline unsigned long mmap_base(struct mm_struct *mm)
+{
+ unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long random_factor = 0;
+
+ if (current->flags & PF_RANDOMIZE)
+ random_factor = get_random_int() % (1024*1024);
+
+ if (gap < MIN_GAP)
+ gap = MIN_GAP;
+ else if (gap > MAX_GAP)
+ gap = MAX_GAP;
+
+ return PAGE_ALIGN(TASK_SIZE - gap - random_factor);
+}
+
+/*
+ * This function, called very early during the creation of a new
+ * process VM image, sets up which VM layout function to use:
+ */
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+ /*
+ * Fall back to the standard layout if the personality
+ * bit is set, or if the expected stack growth is unlimited:
+ */
+ if (sysctl_legacy_va_layout ||
+ (current->personality & ADDR_COMPAT_LAYOUT) ||
+ current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) {
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+ } else {
+ mm->mmap_base = mmap_base(mm);
+ mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+ mm->unmap_area = arch_unmap_area_topdown;
+ }
+}
diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c
new file mode 100644
index 0000000..cb3da6b
--- /dev/null
+++ b/arch/i386/mm/pageattr.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2002 Andi Kleen, SuSE Labs.
+ * Thanks to Ben LaHaise for precious feedback.
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+
+static DEFINE_SPINLOCK(cpa_lock);
+static struct list_head df_list = LIST_HEAD_INIT(df_list);
+
+
+pte_t *lookup_address(unsigned long address)
+{
+ pgd_t *pgd = pgd_offset_k(address);
+ pud_t *pud;
+ pmd_t *pmd;
+ if (pgd_none(*pgd))
+ return NULL;
+ pud = pud_offset(pgd, address);
+ if (pud_none(*pud))
+ return NULL;
+ pmd = pmd_offset(pud, address);
+ if (pmd_none(*pmd))
+ return NULL;
+ if (pmd_large(*pmd))
+ return (pte_t *)pmd;
+ return pte_offset_kernel(pmd, address);
+}
+
+static struct page *split_large_page(unsigned long address, pgprot_t prot)
+{
+ int i;
+ unsigned long addr;
+ struct page *base;
+ pte_t *pbase;
+
+ spin_unlock_irq(&cpa_lock);
+ base = alloc_pages(GFP_KERNEL, 0);
+ spin_lock_irq(&cpa_lock);
+ if (!base)
+ return NULL;
+
+ address = __pa(address);
+ addr = address & LARGE_PAGE_MASK;
+ pbase = (pte_t *)page_address(base);
+ for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
+ pbase[i] = pfn_pte(addr >> PAGE_SHIFT,
+ addr == address ? prot : PAGE_KERNEL);
+ }
+ return base;
+}
+
+static void flush_kernel_map(void *dummy)
+{
+ /* Could use CLFLUSH here if the CPU supports it (Hammer,P4) */
+ if (boot_cpu_data.x86_model >= 4)
+ asm volatile("wbinvd":::"memory");
+ /* Flush all to work around Errata in early athlons regarding
+ * large page flushing.
+ */
+ __flush_tlb_all();
+}
+
+static void set_pmd_pte(pte_t *kpte, unsigned long address, pte_t pte)
+{
+ struct page *page;
+ unsigned long flags;
+
+ set_pte_atomic(kpte, pte); /* change init_mm */
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ for (page = pgd_list; page; page = (struct page *)page->index) {
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pgd = (pgd_t *)page_address(page) + pgd_index(address);
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ set_pte_atomic((pte_t *)pmd, pte);
+ }
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+/*
+ * No more special protections in this 2/4MB area - revert to a
+ * large page again.
+ */
+static inline void revert_page(struct page *kpte_page, unsigned long address)
+{
+ pte_t *linear = (pte_t *)
+ pmd_offset(pud_offset(pgd_offset_k(address), address), address);
+ set_pmd_pte(linear, address,
+ pfn_pte((__pa(address) & LARGE_PAGE_MASK) >> PAGE_SHIFT,
+ PAGE_KERNEL_LARGE));
+}
+
+static int
+__change_page_attr(struct page *page, pgprot_t prot)
+{
+ pte_t *kpte;
+ unsigned long address;
+ struct page *kpte_page;
+
+ BUG_ON(PageHighMem(page));
+ address = (unsigned long)page_address(page);
+
+ kpte = lookup_address(address);
+ if (!kpte)
+ return -EINVAL;
+ kpte_page = virt_to_page(kpte);
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL)) {
+ if ((pte_val(*kpte) & _PAGE_PSE) == 0) {
+ set_pte_atomic(kpte, mk_pte(page, prot));
+ } else {
+ struct page *split = split_large_page(address, prot);
+ if (!split)
+ return -ENOMEM;
+ set_pmd_pte(kpte,address,mk_pte(split, PAGE_KERNEL));
+ kpte_page = split;
+ }
+ get_page(kpte_page);
+ } else if ((pte_val(*kpte) & _PAGE_PSE) == 0) {
+ set_pte_atomic(kpte, mk_pte(page, PAGE_KERNEL));
+ __put_page(kpte_page);
+ } else
+ BUG();
+
+ /*
+ * If the pte was reserved, it means it was created at boot
+ * time (not via split_large_page) and in turn we must not
+ * replace it with a largepage.
+ */
+ if (!PageReserved(kpte_page)) {
+ /* memleak and potential failed 2M page regeneration */
+ BUG_ON(!page_count(kpte_page));
+
+ if (cpu_has_pse && (page_count(kpte_page) == 1)) {
+ list_add(&kpte_page->lru, &df_list);
+ revert_page(kpte_page, address);
+ }
+ }
+ return 0;
+}
+
+static inline void flush_map(void)
+{
+ on_each_cpu(flush_kernel_map, NULL, 1, 1);
+}
+
+/*
+ * Change the page attributes of an page in the linear mapping.
+ *
+ * This should be used when a page is mapped with a different caching policy
+ * than write-back somewhere - some CPUs do not like it when mappings with
+ * different caching policies exist. This changes the page attributes of the
+ * in kernel linear mapping too.
+ *
+ * The caller needs to ensure that there are no conflicting mappings elsewhere.
+ * This function only deals with the kernel linear map.
+ *
+ * Caller must call global_flush_tlb() after this.
+ */
+int change_page_attr(struct page *page, int numpages, pgprot_t prot)
+{
+ int err = 0;
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpa_lock, flags);
+ for (i = 0; i < numpages; i++, page++) {
+ err = __change_page_attr(page, prot);
+ if (err)
+ break;
+ }
+ spin_unlock_irqrestore(&cpa_lock, flags);
+ return err;
+}
+
+void global_flush_tlb(void)
+{
+ LIST_HEAD(l);
+ struct page *pg, *next;
+
+ BUG_ON(irqs_disabled());
+
+ spin_lock_irq(&cpa_lock);
+ list_splice_init(&df_list, &l);
+ spin_unlock_irq(&cpa_lock);
+ flush_map();
+ list_for_each_entry_safe(pg, next, &l, lru)
+ __free_page(pg);
+}
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+void kernel_map_pages(struct page *page, int numpages, int enable)
+{
+ if (PageHighMem(page))
+ return;
+ /* the return value is ignored - the calls cannot fail,
+ * large pages are disabled at boot time.
+ */
+ change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0));
+ /* we should perform an IPI and flush all tlbs,
+ * but that can deadlock->flush only current cpu.
+ */
+ __flush_tlb_all();
+}
+#endif
+
+EXPORT_SYMBOL(change_page_attr);
+EXPORT_SYMBOL(global_flush_tlb);
diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c
new file mode 100644
index 0000000..0742d54
--- /dev/null
+++ b/arch/i386/mm/pgtable.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/i386/mm/pgtable.c
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/fixmap.h>
+#include <asm/e820.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+ int total = 0, reserved = 0;
+ int shared = 0, cached = 0;
+ int highmem = 0;
+ struct page *page;
+ pg_data_t *pgdat;
+ unsigned long i;
+
+ printk("Mem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ for_each_pgdat(pgdat) {
+ for (i = 0; i < pgdat->node_spanned_pages; ++i) {
+ page = pgdat->node_mem_map + i;
+ total++;
+ if (PageHighMem(page))
+ highmem++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ }
+ printk("%d pages of RAM\n", total);
+ printk("%d pages of HIGHMEM\n",highmem);
+ printk("%d reserved pages\n",reserved);
+ printk("%d pages shared\n",shared);
+ printk("%d pages swap cached\n",cached);
+}
+
+/*
+ * Associate a virtual page frame with a given physical page frame
+ * and protection flags for that frame.
+ */
+static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ BUG();
+ return;
+ }
+ pud = pud_offset(pgd, vaddr);
+ if (pud_none(*pud)) {
+ BUG();
+ return;
+ }
+ pmd = pmd_offset(pud, vaddr);
+ if (pmd_none(*pmd)) {
+ BUG();
+ return;
+ }
+ pte = pte_offset_kernel(pmd, vaddr);
+ /* <pfn,flags> stored as-is, to permit clearing entries */
+ set_pte(pte, pfn_pte(pfn, flags));
+
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk ("set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk ("set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk ("set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, pfn_pmd(pfn, flags));
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+{
+ unsigned long address = __fix_to_virt(idx);
+
+ if (idx >= __end_of_fixed_addresses) {
+ BUG();
+ return;
+ }
+ set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0);
+#else
+ pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#endif
+ return pte;
+}
+
+void pmd_ctor(void *pmd, kmem_cache_t *cache, unsigned long flags)
+{
+ memset(pmd, 0, PTRS_PER_PMD*sizeof(pmd_t));
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * The locking scheme was chosen on the basis of manfred's
+ * recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ struct page *page = virt_to_page(pgd);
+ page->index = (unsigned long)pgd_list;
+ if (pgd_list)
+ pgd_list->private = (unsigned long)&page->index;
+ pgd_list = page;
+ page->private = (unsigned long)&pgd_list;
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ struct page *next, **pprev, *page = virt_to_page(pgd);
+ next = (struct page *)page->index;
+ pprev = (struct page **)page->private;
+ *pprev = next;
+ if (next)
+ next->private = (unsigned long)pprev;
+}
+
+void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
+{
+ unsigned long flags;
+
+ if (PTRS_PER_PMD == 1)
+ spin_lock_irqsave(&pgd_lock, flags);
+
+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd, kmem_cache_t *cache, unsigned long unused)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ int i;
+ pgd_t *pgd = kmem_cache_alloc(pgd_cache, GFP_KERNEL);
+
+ if (PTRS_PER_PMD == 1 || !pgd)
+ return pgd;
+
+ for (i = 0; i < USER_PTRS_PER_PGD; ++i) {
+ pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL);
+ if (!pmd)
+ goto out_oom;
+ set_pgd(&pgd[i], __pgd(1 + __pa(pmd)));
+ }
+ return pgd;
+
+out_oom:
+ for (i--; i >= 0; i--)
+ kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1));
+ kmem_cache_free(pgd_cache, pgd);
+ return NULL;
+}
+
+void pgd_free(pgd_t *pgd)
+{
+ int i;
+
+ /* in the PAE case user pgd entries are overwritten before usage */
+ if (PTRS_PER_PMD > 1)
+ for (i = 0; i < USER_PTRS_PER_PGD; ++i)
+ kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1));
+ /* in the non-PAE case, clear_page_range() clears user pgd entries */
+ kmem_cache_free(pgd_cache, pgd);
+}
diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig
new file mode 100644
index 0000000..5ade198
--- /dev/null
+++ b/arch/i386/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
diff --git a/arch/i386/oprofile/Makefile b/arch/i386/oprofile/Makefile
new file mode 100644
index 0000000..30f3eb3
--- /dev/null
+++ b/arch/i386/oprofile/Makefile
@@ -0,0 +1,12 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
+oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_athlon.o \
+ op_model_ppro.o op_model_p4.o
+oprofile-$(CONFIG_X86_IO_APIC) += nmi_timer_int.o
diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c
new file mode 100644
index 0000000..52d72e0
--- /dev/null
+++ b/arch/i386/oprofile/backtrace.c
@@ -0,0 +1,111 @@
+/**
+ * @file backtrace.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ * @author David Smith
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+
+struct frame_head {
+ struct frame_head * ebp;
+ unsigned long ret;
+} __attribute__((packed));
+
+static struct frame_head *
+dump_backtrace(struct frame_head * head)
+{
+ oprofile_add_trace(head->ret);
+
+ /* frame pointers should strictly progress back up the stack
+ * (towards higher addresses) */
+ if (head >= head->ebp)
+ return NULL;
+
+ return head->ebp;
+}
+
+/* check that the page(s) containing the frame head are present */
+static int pages_present(struct frame_head * head)
+{
+ struct mm_struct * mm = current->mm;
+
+ /* FIXME: only necessary once per page */
+ if (!check_user_page_readable(mm, (unsigned long)head))
+ return 0;
+
+ return check_user_page_readable(mm, (unsigned long)(head + 1));
+}
+
+/*
+ * | | /\ Higher addresses
+ * | |
+ * --------------- stack base (address of current_thread_info)
+ * | thread info |
+ * . .
+ * | stack |
+ * --------------- saved regs->ebp value if valid (frame_head address)
+ * . .
+ * --------------- struct pt_regs stored on stack (struct pt_regs *)
+ * | |
+ * . .
+ * | |
+ * --------------- %esp
+ * | |
+ * | | \/ Lower addresses
+ *
+ * Thus, &pt_regs <-> stack base restricts the valid(ish) ebp values
+ */
+#ifdef CONFIG_FRAME_POINTER
+static int valid_kernel_stack(struct frame_head * head, struct pt_regs * regs)
+{
+ unsigned long headaddr = (unsigned long)head;
+ unsigned long stack = (unsigned long)regs;
+ unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
+
+ return headaddr > stack && headaddr < stack_base;
+}
+#else
+/* without fp, it's just junk */
+static int valid_kernel_stack(struct frame_head * head, struct pt_regs * regs)
+{
+ return 0;
+}
+#endif
+
+
+void
+x86_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+ struct frame_head *head;
+
+#ifdef CONFIG_X86_64
+ head = (struct frame_head *)regs->rbp;
+#else
+ head = (struct frame_head *)regs->ebp;
+#endif
+
+ if (!user_mode(regs)) {
+ while (depth-- && valid_kernel_stack(head, regs))
+ head = dump_backtrace(head);
+ return;
+ }
+
+#ifdef CONFIG_SMP
+ if (!spin_trylock(¤t->mm->page_table_lock))
+ return;
+#endif
+
+ while (depth-- && head && pages_present(head))
+ head = dump_backtrace(head);
+
+#ifdef CONFIG_SMP
+ spin_unlock(¤t->mm->page_table_lock);
+#endif
+}
diff --git a/arch/i386/oprofile/init.c b/arch/i386/oprofile/init.c
new file mode 100644
index 0000000..c90332d
--- /dev/null
+++ b/arch/i386/oprofile/init.c
@@ -0,0 +1,48 @@
+/**
+ * @file init.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon <levon@movementarian.org>
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+/* We support CPUs that have performance counters like the Pentium Pro
+ * with the NMI mode driver.
+ */
+
+extern int nmi_init(struct oprofile_operations * ops);
+extern int nmi_timer_init(struct oprofile_operations * ops);
+extern void nmi_exit(void);
+extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+
+int __init oprofile_arch_init(struct oprofile_operations * ops)
+{
+ int ret;
+
+ ret = -ENODEV;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ ret = nmi_init(ops);
+#endif
+#ifdef CONFIG_X86_IO_APIC
+ if (ret < 0)
+ ret = nmi_timer_init(ops);
+#endif
+ ops->backtrace = x86_backtrace;
+
+ return ret;
+}
+
+
+void oprofile_arch_exit(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ nmi_exit();
+#endif
+}
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c
new file mode 100644
index 0000000..3492d96
--- /dev/null
+++ b/arch/i386/oprofile/nmi_int.c
@@ -0,0 +1,427 @@
+/**
+ * @file nmi_int.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon <levon@movementarian.org>
+ */
+
+#include <linux/init.h>
+#include <linux/notifier.h>
+#include <linux/smp.h>
+#include <linux/oprofile.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <asm/nmi.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "op_counter.h"
+#include "op_x86_model.h"
+
+static struct op_x86_model_spec const * model;
+static struct op_msrs cpu_msrs[NR_CPUS];
+static unsigned long saved_lvtpc[NR_CPUS];
+
+static int nmi_start(void);
+static void nmi_stop(void);
+
+/* 0 == registered but off, 1 == registered and on */
+static int nmi_enabled = 0;
+
+#ifdef CONFIG_PM
+
+static int nmi_suspend(struct sys_device *dev, u32 state)
+{
+ if (nmi_enabled == 1)
+ nmi_stop();
+ return 0;
+}
+
+
+static int nmi_resume(struct sys_device *dev)
+{
+ if (nmi_enabled == 1)
+ nmi_start();
+ return 0;
+}
+
+
+static struct sysdev_class oprofile_sysclass = {
+ set_kset_name("oprofile"),
+ .resume = nmi_resume,
+ .suspend = nmi_suspend,
+};
+
+
+static struct sys_device device_oprofile = {
+ .id = 0,
+ .cls = &oprofile_sysclass,
+};
+
+
+static int __init init_driverfs(void)
+{
+ int error;
+ if (!(error = sysdev_class_register(&oprofile_sysclass)))
+ error = sysdev_register(&device_oprofile);
+ return error;
+}
+
+
+static void exit_driverfs(void)
+{
+ sysdev_unregister(&device_oprofile);
+ sysdev_class_unregister(&oprofile_sysclass);
+}
+
+#else
+#define init_driverfs() do { } while (0)
+#define exit_driverfs() do { } while (0)
+#endif /* CONFIG_PM */
+
+
+static int nmi_callback(struct pt_regs * regs, int cpu)
+{
+ return model->check_ctrs(regs, &cpu_msrs[cpu]);
+}
+
+
+static void nmi_cpu_save_registers(struct op_msrs * msrs)
+{
+ unsigned int const nr_ctrs = model->num_counters;
+ unsigned int const nr_ctrls = model->num_controls;
+ struct op_msr * counters = msrs->counters;
+ struct op_msr * controls = msrs->controls;
+ unsigned int i;
+
+ for (i = 0; i < nr_ctrs; ++i) {
+ rdmsr(counters[i].addr,
+ counters[i].saved.low,
+ counters[i].saved.high);
+ }
+
+ for (i = 0; i < nr_ctrls; ++i) {
+ rdmsr(controls[i].addr,
+ controls[i].saved.low,
+ controls[i].saved.high);
+ }
+}
+
+
+static void nmi_save_registers(void * dummy)
+{
+ int cpu = smp_processor_id();
+ struct op_msrs * msrs = &cpu_msrs[cpu];
+ model->fill_in_addresses(msrs);
+ nmi_cpu_save_registers(msrs);
+}
+
+
+static void free_msrs(void)
+{
+ int i;
+ for (i = 0; i < NR_CPUS; ++i) {
+ kfree(cpu_msrs[i].counters);
+ cpu_msrs[i].counters = NULL;
+ kfree(cpu_msrs[i].controls);
+ cpu_msrs[i].controls = NULL;
+ }
+}
+
+
+static int allocate_msrs(void)
+{
+ int success = 1;
+ size_t controls_size = sizeof(struct op_msr) * model->num_controls;
+ size_t counters_size = sizeof(struct op_msr) * model->num_counters;
+
+ int i;
+ for (i = 0; i < NR_CPUS; ++i) {
+ if (!cpu_online(i))
+ continue;
+
+ cpu_msrs[i].counters = kmalloc(counters_size, GFP_KERNEL);
+ if (!cpu_msrs[i].counters) {
+ success = 0;
+ break;
+ }
+ cpu_msrs[i].controls = kmalloc(controls_size, GFP_KERNEL);
+ if (!cpu_msrs[i].controls) {
+ success = 0;
+ break;
+ }
+ }
+
+ if (!success)
+ free_msrs();
+
+ return success;
+}
+
+
+static void nmi_cpu_setup(void * dummy)
+{
+ int cpu = smp_processor_id();
+ struct op_msrs * msrs = &cpu_msrs[cpu];
+ spin_lock(&oprofilefs_lock);
+ model->setup_ctrs(msrs);
+ spin_unlock(&oprofilefs_lock);
+ saved_lvtpc[cpu] = apic_read(APIC_LVTPC);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+}
+
+
+static int nmi_setup(void)
+{
+ if (!allocate_msrs())
+ return -ENOMEM;
+
+ /* We walk a thin line between law and rape here.
+ * We need to be careful to install our NMI handler
+ * without actually triggering any NMIs as this will
+ * break the core code horrifically.
+ */
+ if (reserve_lapic_nmi() < 0) {
+ free_msrs();
+ return -EBUSY;
+ }
+ /* We need to serialize save and setup for HT because the subset
+ * of msrs are distinct for save and setup operations
+ */
+ on_each_cpu(nmi_save_registers, NULL, 0, 1);
+ on_each_cpu(nmi_cpu_setup, NULL, 0, 1);
+ set_nmi_callback(nmi_callback);
+ nmi_enabled = 1;
+ return 0;
+}
+
+
+static void nmi_restore_registers(struct op_msrs * msrs)
+{
+ unsigned int const nr_ctrs = model->num_counters;
+ unsigned int const nr_ctrls = model->num_controls;
+ struct op_msr * counters = msrs->counters;
+ struct op_msr * controls = msrs->controls;
+ unsigned int i;
+
+ for (i = 0; i < nr_ctrls; ++i) {
+ wrmsr(controls[i].addr,
+ controls[i].saved.low,
+ controls[i].saved.high);
+ }
+
+ for (i = 0; i < nr_ctrs; ++i) {
+ wrmsr(counters[i].addr,
+ counters[i].saved.low,
+ counters[i].saved.high);
+ }
+}
+
+
+static void nmi_cpu_shutdown(void * dummy)
+{
+ unsigned int v;
+ int cpu = smp_processor_id();
+ struct op_msrs * msrs = &cpu_msrs[cpu];
+
+ /* restoring APIC_LVTPC can trigger an apic error because the delivery
+ * mode and vector nr combination can be illegal. That's by design: on
+ * power on apic lvt contain a zero vector nr which are legal only for
+ * NMI delivery mode. So inhibit apic err before restoring lvtpc
+ */
+ v = apic_read(APIC_LVTERR);
+ apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTPC, saved_lvtpc[cpu]);
+ apic_write(APIC_LVTERR, v);
+ nmi_restore_registers(msrs);
+}
+
+
+static void nmi_shutdown(void)
+{
+ nmi_enabled = 0;
+ on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
+ unset_nmi_callback();
+ release_lapic_nmi();
+ free_msrs();
+}
+
+
+static void nmi_cpu_start(void * dummy)
+{
+ struct op_msrs const * msrs = &cpu_msrs[smp_processor_id()];
+ model->start(msrs);
+}
+
+
+static int nmi_start(void)
+{
+ on_each_cpu(nmi_cpu_start, NULL, 0, 1);
+ return 0;
+}
+
+
+static void nmi_cpu_stop(void * dummy)
+{
+ struct op_msrs const * msrs = &cpu_msrs[smp_processor_id()];
+ model->stop(msrs);
+}
+
+
+static void nmi_stop(void)
+{
+ on_each_cpu(nmi_cpu_stop, NULL, 0, 1);
+}
+
+
+struct op_counter_config counter_config[OP_MAX_COUNTER];
+
+static int nmi_create_files(struct super_block * sb, struct dentry * root)
+{
+ unsigned int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry * dir;
+ char buf[2];
+
+ snprintf(buf, 2, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+ oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
+ oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ }
+
+ return 0;
+}
+
+
+static int __init p4_init(char ** cpu_type)
+{
+ __u8 cpu_model = boot_cpu_data.x86_model;
+
+ if (cpu_model > 4)
+ return 0;
+
+#ifndef CONFIG_SMP
+ *cpu_type = "i386/p4";
+ model = &op_p4_spec;
+ return 1;
+#else
+ switch (smp_num_siblings) {
+ case 1:
+ *cpu_type = "i386/p4";
+ model = &op_p4_spec;
+ return 1;
+
+ case 2:
+ *cpu_type = "i386/p4-ht";
+ model = &op_p4_ht2_spec;
+ return 1;
+ }
+#endif
+
+ printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n");
+ printk(KERN_INFO "oprofile: Reverting to timer mode.\n");
+ return 0;
+}
+
+
+static int __init ppro_init(char ** cpu_type)
+{
+ __u8 cpu_model = boot_cpu_data.x86_model;
+
+ if (cpu_model > 0xd)
+ return 0;
+
+ if (cpu_model == 9) {
+ *cpu_type = "i386/p6_mobile";
+ } else if (cpu_model > 5) {
+ *cpu_type = "i386/piii";
+ } else if (cpu_model > 2) {
+ *cpu_type = "i386/pii";
+ } else {
+ *cpu_type = "i386/ppro";
+ }
+
+ model = &op_ppro_spec;
+ return 1;
+}
+
+/* in order to get driverfs right */
+static int using_nmi;
+
+int __init nmi_init(struct oprofile_operations *ops)
+{
+ __u8 vendor = boot_cpu_data.x86_vendor;
+ __u8 family = boot_cpu_data.x86;
+ char *cpu_type;
+
+ if (!cpu_has_apic)
+ return -ENODEV;
+
+ switch (vendor) {
+ case X86_VENDOR_AMD:
+ /* Needs to be at least an Athlon (or hammer in 32bit mode) */
+
+ switch (family) {
+ default:
+ return -ENODEV;
+ case 6:
+ model = &op_athlon_spec;
+ cpu_type = "i386/athlon";
+ break;
+ case 0xf:
+ model = &op_athlon_spec;
+ /* Actually it could be i386/hammer too, but give
+ user space an consistent name. */
+ cpu_type = "x86-64/hammer";
+ break;
+ }
+ break;
+
+ case X86_VENDOR_INTEL:
+ switch (family) {
+ /* Pentium IV */
+ case 0xf:
+ if (!p4_init(&cpu_type))
+ return -ENODEV;
+ break;
+
+ /* A P6-class processor */
+ case 6:
+ if (!ppro_init(&cpu_type))
+ return -ENODEV;
+ break;
+
+ default:
+ return -ENODEV;
+ }
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ init_driverfs();
+ using_nmi = 1;
+ ops->create_files = nmi_create_files;
+ ops->setup = nmi_setup;
+ ops->shutdown = nmi_shutdown;
+ ops->start = nmi_start;
+ ops->stop = nmi_stop;
+ ops->cpu_type = cpu_type;
+ printk(KERN_INFO "oprofile: using NMI interrupt.\n");
+ return 0;
+}
+
+
+void nmi_exit(void)
+{
+ if (using_nmi)
+ exit_driverfs();
+}
diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c
new file mode 100644
index 0000000..b2e462a
--- /dev/null
+++ b/arch/i386/oprofile/nmi_timer_int.c
@@ -0,0 +1,55 @@
+/**
+ * @file nmi_timer_int.c
+ *
+ * @remark Copyright 2003 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo <zwane@linuxpower.ca>
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <linux/oprofile.h>
+#include <linux/rcupdate.h>
+
+
+#include <asm/nmi.h>
+#include <asm/apic.h>
+#include <asm/ptrace.h>
+
+static int nmi_timer_callback(struct pt_regs * regs, int cpu)
+{
+ oprofile_add_sample(regs, 0);
+ return 1;
+}
+
+static int timer_start(void)
+{
+ disable_timer_nmi_watchdog();
+ set_nmi_callback(nmi_timer_callback);
+ return 0;
+}
+
+
+static void timer_stop(void)
+{
+ enable_timer_nmi_watchdog();
+ unset_nmi_callback();
+ synchronize_kernel();
+}
+
+
+int __init nmi_timer_init(struct oprofile_operations * ops)
+{
+ extern int nmi_active;
+
+ if (nmi_active <= 0)
+ return -ENODEV;
+
+ ops->start = timer_start;
+ ops->stop = timer_stop;
+ ops->cpu_type = "timer";
+ printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
+ return 0;
+}
diff --git a/arch/i386/oprofile/op_counter.h b/arch/i386/oprofile/op_counter.h
new file mode 100644
index 0000000..2880b15
--- /dev/null
+++ b/arch/i386/oprofile/op_counter.h
@@ -0,0 +1,29 @@
+/**
+ * @file op_counter.h
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ */
+
+#ifndef OP_COUNTER_H
+#define OP_COUNTER_H
+
+#define OP_MAX_COUNTER 8
+
+/* Per-perfctr configuration as set via
+ * oprofilefs.
+ */
+struct op_counter_config {
+ unsigned long count;
+ unsigned long enabled;
+ unsigned long event;
+ unsigned long kernel;
+ unsigned long user;
+ unsigned long unit_mask;
+};
+
+extern struct op_counter_config counter_config[];
+
+#endif /* OP_COUNTER_H */
diff --git a/arch/i386/oprofile/op_model_athlon.c b/arch/i386/oprofile/op_model_athlon.c
new file mode 100644
index 0000000..3ad9a72
--- /dev/null
+++ b/arch/i386/oprofile/op_model_athlon.c
@@ -0,0 +1,149 @@
+/**
+ * @file op_model_athlon.h
+ * athlon / K7 model-specific MSR operations
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ * @author Philippe Elie
+ * @author Graydon Hoare
+ */
+
+#include <linux/oprofile.h>
+#include <asm/ptrace.h>
+#include <asm/msr.h>
+
+#include "op_x86_model.h"
+#include "op_counter.h"
+
+#define NUM_COUNTERS 4
+#define NUM_CONTROLS 4
+
+#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
+#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1);} while (0)
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+
+#define CTRL_READ(l,h,msrs,c) do {rdmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
+#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_EVENT(val, e) (val |= e)
+
+static unsigned long reset_value[NUM_COUNTERS];
+
+static void athlon_fill_in_addresses(struct op_msrs * const msrs)
+{
+ msrs->counters[0].addr = MSR_K7_PERFCTR0;
+ msrs->counters[1].addr = MSR_K7_PERFCTR1;
+ msrs->counters[2].addr = MSR_K7_PERFCTR2;
+ msrs->counters[3].addr = MSR_K7_PERFCTR3;
+
+ msrs->controls[0].addr = MSR_K7_EVNTSEL0;
+ msrs->controls[1].addr = MSR_K7_EVNTSEL1;
+ msrs->controls[2].addr = MSR_K7_EVNTSEL2;
+ msrs->controls[3].addr = MSR_K7_EVNTSEL3;
+}
+
+
+static void athlon_setup_ctrs(struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ /* clear all counters */
+ for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+
+ /* avoid a false detection of ctr overflows in NMI handler */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ CTR_WRITE(1, msrs, i);
+ }
+
+ /* enable active counters */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (counter_config[i].enabled) {
+ reset_value[i] = counter_config[i].count;
+
+ CTR_WRITE(counter_config[i].count, msrs, i);
+
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_SET_ENABLE(low);
+ CTRL_SET_USR(low, counter_config[i].user);
+ CTRL_SET_KERN(low, counter_config[i].kernel);
+ CTRL_SET_UM(low, counter_config[i].unit_mask);
+ CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_WRITE(low, high, msrs, i);
+ } else {
+ reset_value[i] = 0;
+ }
+ }
+}
+
+
+static int athlon_check_ctrs(struct pt_regs * const regs,
+ struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ CTR_READ(low, high, msrs, i);
+ if (CTR_OVERFLOWED(low)) {
+ oprofile_add_sample(regs, i);
+ CTR_WRITE(reset_value[i], msrs, i);
+ }
+ }
+
+ /* See op_model_ppro.c */
+ return 1;
+}
+
+
+static void athlon_start(struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+ for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ if (reset_value[i]) {
+ CTRL_READ(low, high, msrs, i);
+ CTRL_SET_ACTIVE(low);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+ }
+}
+
+
+static void athlon_stop(struct op_msrs const * const msrs)
+{
+ unsigned int low,high;
+ int i;
+
+ /* Subtle: stop on all counters to avoid race with
+ * setting our pm callback */
+ for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ CTRL_READ(low, high, msrs, i);
+ CTRL_SET_INACTIVE(low);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+}
+
+
+struct op_x86_model_spec const op_athlon_spec = {
+ .num_counters = NUM_COUNTERS,
+ .num_controls = NUM_CONTROLS,
+ .fill_in_addresses = &athlon_fill_in_addresses,
+ .setup_ctrs = &athlon_setup_ctrs,
+ .check_ctrs = &athlon_check_ctrs,
+ .start = &athlon_start,
+ .stop = &athlon_stop
+};
diff --git a/arch/i386/oprofile/op_model_p4.c b/arch/i386/oprofile/op_model_p4.c
new file mode 100644
index 0000000..ac8a066
--- /dev/null
+++ b/arch/i386/oprofile/op_model_p4.c
@@ -0,0 +1,725 @@
+/**
+ * @file op_model_p4.c
+ * P4 model-specific MSR operations
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Graydon Hoare
+ */
+
+#include <linux/oprofile.h>
+#include <linux/smp.h>
+#include <asm/msr.h>
+#include <asm/ptrace.h>
+#include <asm/fixmap.h>
+#include <asm/apic.h>
+
+#include "op_x86_model.h"
+#include "op_counter.h"
+
+#define NUM_EVENTS 39
+
+#define NUM_COUNTERS_NON_HT 8
+#define NUM_ESCRS_NON_HT 45
+#define NUM_CCCRS_NON_HT 18
+#define NUM_CONTROLS_NON_HT (NUM_ESCRS_NON_HT + NUM_CCCRS_NON_HT)
+
+#define NUM_COUNTERS_HT2 4
+#define NUM_ESCRS_HT2 23
+#define NUM_CCCRS_HT2 9
+#define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
+
+static unsigned int num_counters = NUM_COUNTERS_NON_HT;
+
+
+/* this has to be checked dynamically since the
+ hyper-threadedness of a chip is discovered at
+ kernel boot-time. */
+static inline void setup_num_counters(void)
+{
+#ifdef CONFIG_SMP
+ if (smp_num_siblings == 2)
+ num_counters = NUM_COUNTERS_HT2;
+#endif
+}
+
+static int inline addr_increment(void)
+{
+#ifdef CONFIG_SMP
+ return smp_num_siblings == 2 ? 2 : 1;
+#else
+ return 1;
+#endif
+}
+
+
+/* tables to simulate simplified hardware view of p4 registers */
+struct p4_counter_binding {
+ int virt_counter;
+ int counter_address;
+ int cccr_address;
+};
+
+struct p4_event_binding {
+ int escr_select; /* value to put in CCCR */
+ int event_select; /* value to put in ESCR */
+ struct {
+ int virt_counter; /* for this counter... */
+ int escr_address; /* use this ESCR */
+ } bindings[2];
+};
+
+/* nb: these CTR_* defines are a duplicate of defines in
+ event/i386.p4*events. */
+
+
+#define CTR_BPU_0 (1 << 0)
+#define CTR_MS_0 (1 << 1)
+#define CTR_FLAME_0 (1 << 2)
+#define CTR_IQ_4 (1 << 3)
+#define CTR_BPU_2 (1 << 4)
+#define CTR_MS_2 (1 << 5)
+#define CTR_FLAME_2 (1 << 6)
+#define CTR_IQ_5 (1 << 7)
+
+static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = {
+ { CTR_BPU_0, MSR_P4_BPU_PERFCTR0, MSR_P4_BPU_CCCR0 },
+ { CTR_MS_0, MSR_P4_MS_PERFCTR0, MSR_P4_MS_CCCR0 },
+ { CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 },
+ { CTR_IQ_4, MSR_P4_IQ_PERFCTR4, MSR_P4_IQ_CCCR4 },
+ { CTR_BPU_2, MSR_P4_BPU_PERFCTR2, MSR_P4_BPU_CCCR2 },
+ { CTR_MS_2, MSR_P4_MS_PERFCTR2, MSR_P4_MS_CCCR2 },
+ { CTR_FLAME_2, MSR_P4_FLAME_PERFCTR2, MSR_P4_FLAME_CCCR2 },
+ { CTR_IQ_5, MSR_P4_IQ_PERFCTR5, MSR_P4_IQ_CCCR5 }
+};
+
+#define NUM_UNUSED_CCCRS NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT
+
+/* All cccr we don't use. */
+static int p4_unused_cccr[NUM_UNUSED_CCCRS] = {
+ MSR_P4_BPU_CCCR1, MSR_P4_BPU_CCCR3,
+ MSR_P4_MS_CCCR1, MSR_P4_MS_CCCR3,
+ MSR_P4_FLAME_CCCR1, MSR_P4_FLAME_CCCR3,
+ MSR_P4_IQ_CCCR0, MSR_P4_IQ_CCCR1,
+ MSR_P4_IQ_CCCR2, MSR_P4_IQ_CCCR3
+};
+
+/* p4 event codes in libop/op_event.h are indices into this table. */
+
+static struct p4_event_binding p4_events[NUM_EVENTS] = {
+
+ { /* BRANCH_RETIRED */
+ 0x05, 0x06,
+ { {CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ {CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* MISPRED_BRANCH_RETIRED */
+ 0x04, 0x03,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
+ },
+
+ { /* TC_DELIVER_MODE */
+ 0x01, 0x01,
+ { { CTR_MS_0, MSR_P4_TC_ESCR0},
+ { CTR_MS_2, MSR_P4_TC_ESCR1} }
+ },
+
+ { /* BPU_FETCH_REQUEST */
+ 0x00, 0x03,
+ { { CTR_BPU_0, MSR_P4_BPU_ESCR0},
+ { CTR_BPU_2, MSR_P4_BPU_ESCR1} }
+ },
+
+ { /* ITLB_REFERENCE */
+ 0x03, 0x18,
+ { { CTR_BPU_0, MSR_P4_ITLB_ESCR0},
+ { CTR_BPU_2, MSR_P4_ITLB_ESCR1} }
+ },
+
+ { /* MEMORY_CANCEL */
+ 0x05, 0x02,
+ { { CTR_FLAME_0, MSR_P4_DAC_ESCR0},
+ { CTR_FLAME_2, MSR_P4_DAC_ESCR1} }
+ },
+
+ { /* MEMORY_COMPLETE */
+ 0x02, 0x08,
+ { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
+ { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
+ },
+
+ { /* LOAD_PORT_REPLAY */
+ 0x02, 0x04,
+ { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
+ { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
+ },
+
+ { /* STORE_PORT_REPLAY */
+ 0x02, 0x05,
+ { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
+ { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
+ },
+
+ { /* MOB_LOAD_REPLAY */
+ 0x02, 0x03,
+ { { CTR_BPU_0, MSR_P4_MOB_ESCR0},
+ { CTR_BPU_2, MSR_P4_MOB_ESCR1} }
+ },
+
+ { /* PAGE_WALK_TYPE */
+ 0x04, 0x01,
+ { { CTR_BPU_0, MSR_P4_PMH_ESCR0},
+ { CTR_BPU_2, MSR_P4_PMH_ESCR1} }
+ },
+
+ { /* BSQ_CACHE_REFERENCE */
+ 0x07, 0x0c,
+ { { CTR_BPU_0, MSR_P4_BSU_ESCR0},
+ { CTR_BPU_2, MSR_P4_BSU_ESCR1} }
+ },
+
+ { /* IOQ_ALLOCATION */
+ 0x06, 0x03,
+ { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
+ { 0, 0 } }
+ },
+
+ { /* IOQ_ACTIVE_ENTRIES */
+ 0x06, 0x1a,
+ { { CTR_BPU_2, MSR_P4_FSB_ESCR1},
+ { 0, 0 } }
+ },
+
+ { /* FSB_DATA_ACTIVITY */
+ 0x06, 0x17,
+ { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
+ { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
+ },
+
+ { /* BSQ_ALLOCATION */
+ 0x07, 0x05,
+ { { CTR_BPU_0, MSR_P4_BSU_ESCR0},
+ { 0, 0 } }
+ },
+
+ { /* BSQ_ACTIVE_ENTRIES */
+ 0x07, 0x06,
+ { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
+ { 0, 0 } }
+ },
+
+ { /* X87_ASSIST */
+ 0x05, 0x03,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* SSE_INPUT_ASSIST */
+ 0x01, 0x34,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* PACKED_SP_UOP */
+ 0x01, 0x08,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* PACKED_DP_UOP */
+ 0x01, 0x0c,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* SCALAR_SP_UOP */
+ 0x01, 0x0a,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* SCALAR_DP_UOP */
+ 0x01, 0x0e,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* 64BIT_MMX_UOP */
+ 0x01, 0x02,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* 128BIT_MMX_UOP */
+ 0x01, 0x1a,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* X87_FP_UOP */
+ 0x01, 0x04,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* X87_SIMD_MOVES_UOP */
+ 0x01, 0x2e,
+ { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
+ { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
+ },
+
+ { /* MACHINE_CLEAR */
+ 0x05, 0x02,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* GLOBAL_POWER_EVENTS */
+ 0x06, 0x13 /* older manual says 0x05, newer 0x13 */,
+ { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
+ { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
+ },
+
+ { /* TC_MS_XFER */
+ 0x00, 0x05,
+ { { CTR_MS_0, MSR_P4_MS_ESCR0},
+ { CTR_MS_2, MSR_P4_MS_ESCR1} }
+ },
+
+ { /* UOP_QUEUE_WRITES */
+ 0x00, 0x09,
+ { { CTR_MS_0, MSR_P4_MS_ESCR0},
+ { CTR_MS_2, MSR_P4_MS_ESCR1} }
+ },
+
+ { /* FRONT_END_EVENT */
+ 0x05, 0x08,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* EXECUTION_EVENT */
+ 0x05, 0x0c,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* REPLAY_EVENT */
+ 0x05, 0x09,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
+ },
+
+ { /* INSTR_RETIRED */
+ 0x04, 0x02,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
+ },
+
+ { /* UOPS_RETIRED */
+ 0x04, 0x01,
+ { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
+ { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
+ },
+
+ { /* UOP_TYPE */
+ 0x02, 0x02,
+ { { CTR_IQ_4, MSR_P4_RAT_ESCR0},
+ { CTR_IQ_5, MSR_P4_RAT_ESCR1} }
+ },
+
+ { /* RETIRED_MISPRED_BRANCH_TYPE */
+ 0x02, 0x05,
+ { { CTR_MS_0, MSR_P4_TBPU_ESCR0},
+ { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
+ },
+
+ { /* RETIRED_BRANCH_TYPE */
+ 0x02, 0x04,
+ { { CTR_MS_0, MSR_P4_TBPU_ESCR0},
+ { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
+ }
+};
+
+
+#define MISC_PMC_ENABLED_P(x) ((x) & 1 << 7)
+
+#define ESCR_RESERVED_BITS 0x80000003
+#define ESCR_CLEAR(escr) ((escr) &= ESCR_RESERVED_BITS)
+#define ESCR_SET_USR_0(escr, usr) ((escr) |= (((usr) & 1) << 2))
+#define ESCR_SET_OS_0(escr, os) ((escr) |= (((os) & 1) << 3))
+#define ESCR_SET_USR_1(escr, usr) ((escr) |= (((usr) & 1)))
+#define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
+#define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
+#define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
+#define ESCR_READ(escr,high,ev,i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
+#define ESCR_WRITE(escr,high,ev,i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
+
+#define CCCR_RESERVED_BITS 0x38030FFF
+#define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
+#define CCCR_SET_REQUIRED_BITS(cccr) ((cccr) |= 0x00030000)
+#define CCCR_SET_ESCR_SELECT(cccr, sel) ((cccr) |= (((sel) & 0x07) << 13))
+#define CCCR_SET_PMI_OVF_0(cccr) ((cccr) |= (1<<26))
+#define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
+#define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
+#define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
+#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
+#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
+#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
+#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
+
+#define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0)
+#define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0)
+#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
+
+
+/* this assigns a "stagger" to the current CPU, which is used throughout
+ the code in this module as an extra array offset, to select the "even"
+ or "odd" part of all the divided resources. */
+static unsigned int get_stagger(void)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+ return (cpu != first_cpu(cpu_sibling_map[cpu]));
+#endif
+ return 0;
+}
+
+
+/* finally, mediate access to a real hardware counter
+ by passing a "virtual" counter numer to this macro,
+ along with your stagger setting. */
+#define VIRT_CTR(stagger, i) ((i) + ((num_counters) * (stagger)))
+
+static unsigned long reset_value[NUM_COUNTERS_NON_HT];
+
+
+static void p4_fill_in_addresses(struct op_msrs * const msrs)
+{
+ unsigned int i;
+ unsigned int addr, stag;
+
+ setup_num_counters();
+ stag = get_stagger();
+
+ /* the counter registers we pay attention to */
+ for (i = 0; i < num_counters; ++i) {
+ msrs->counters[i].addr =
+ p4_counters[VIRT_CTR(stag, i)].counter_address;
+ }
+
+ /* FIXME: bad feeling, we don't save the 10 counters we don't use. */
+
+ /* 18 CCCR registers */
+ for (i = 0, addr = MSR_P4_BPU_CCCR0 + stag;
+ addr <= MSR_P4_IQ_CCCR5; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+
+ /* 43 ESCR registers in three or four discontiguous group */
+ for (addr = MSR_P4_BSU_ESCR0 + stag;
+ addr < MSR_P4_IQ_ESCR0; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+
+ /* no IQ_ESCR0/1 on some models, we save a seconde time BSU_ESCR0/1
+ * to avoid special case in nmi_{save|restore}_registers() */
+ if (boot_cpu_data.x86_model >= 0x3) {
+ for (addr = MSR_P4_BSU_ESCR0 + stag;
+ addr <= MSR_P4_BSU_ESCR1; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+ } else {
+ for (addr = MSR_P4_IQ_ESCR0 + stag;
+ addr <= MSR_P4_IQ_ESCR1; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+ }
+
+ for (addr = MSR_P4_RAT_ESCR0 + stag;
+ addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+
+ for (addr = MSR_P4_MS_ESCR0 + stag;
+ addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+
+ for (addr = MSR_P4_IX_ESCR0 + stag;
+ addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
+ msrs->controls[i].addr = addr;
+ }
+
+ /* there are 2 remaining non-contiguously located ESCRs */
+
+ if (num_counters == NUM_COUNTERS_NON_HT) {
+ /* standard non-HT CPUs handle both remaining ESCRs*/
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
+
+ } else if (stag == 0) {
+ /* HT CPUs give the first remainder to the even thread, as
+ the 32nd control register */
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
+
+ } else {
+ /* and two copies of the second to the odd thread,
+ for the 22st and 23nd control registers */
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ }
+}
+
+
+static void pmc_setup_one_p4_counter(unsigned int ctr)
+{
+ int i;
+ int const maxbind = 2;
+ unsigned int cccr = 0;
+ unsigned int escr = 0;
+ unsigned int high = 0;
+ unsigned int counter_bit;
+ struct p4_event_binding *ev = NULL;
+ unsigned int stag;
+
+ stag = get_stagger();
+
+ /* convert from counter *number* to counter *bit* */
+ counter_bit = 1 << VIRT_CTR(stag, ctr);
+
+ /* find our event binding structure. */
+ if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) {
+ printk(KERN_ERR
+ "oprofile: P4 event code 0x%lx out of range\n",
+ counter_config[ctr].event);
+ return;
+ }
+
+ ev = &(p4_events[counter_config[ctr].event - 1]);
+
+ for (i = 0; i < maxbind; i++) {
+ if (ev->bindings[i].virt_counter & counter_bit) {
+
+ /* modify ESCR */
+ ESCR_READ(escr, high, ev, i);
+ ESCR_CLEAR(escr);
+ if (stag == 0) {
+ ESCR_SET_USR_0(escr, counter_config[ctr].user);
+ ESCR_SET_OS_0(escr, counter_config[ctr].kernel);
+ } else {
+ ESCR_SET_USR_1(escr, counter_config[ctr].user);
+ ESCR_SET_OS_1(escr, counter_config[ctr].kernel);
+ }
+ ESCR_SET_EVENT_SELECT(escr, ev->event_select);
+ ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
+ ESCR_WRITE(escr, high, ev, i);
+
+ /* modify CCCR */
+ CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
+ CCCR_CLEAR(cccr);
+ CCCR_SET_REQUIRED_BITS(cccr);
+ CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
+ if (stag == 0) {
+ CCCR_SET_PMI_OVF_0(cccr);
+ } else {
+ CCCR_SET_PMI_OVF_1(cccr);
+ }
+ CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
+ return;
+ }
+ }
+
+ printk(KERN_ERR
+ "oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n",
+ counter_config[ctr].event, stag, ctr);
+}
+
+
+static void p4_setup_ctrs(struct op_msrs const * const msrs)
+{
+ unsigned int i;
+ unsigned int low, high;
+ unsigned int addr;
+ unsigned int stag;
+
+ stag = get_stagger();
+
+ rdmsr(MSR_IA32_MISC_ENABLE, low, high);
+ if (! MISC_PMC_ENABLED_P(low)) {
+ printk(KERN_ERR "oprofile: P4 PMC not available\n");
+ return;
+ }
+
+ /* clear the cccrs we will use */
+ for (i = 0 ; i < num_counters ; i++) {
+ rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
+ CCCR_CLEAR(low);
+ CCCR_SET_REQUIRED_BITS(low);
+ wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
+ }
+
+ /* clear cccrs outside our concern */
+ for (i = stag ; i < NUM_UNUSED_CCCRS ; i += addr_increment()) {
+ rdmsr(p4_unused_cccr[i], low, high);
+ CCCR_CLEAR(low);
+ CCCR_SET_REQUIRED_BITS(low);
+ wrmsr(p4_unused_cccr[i], low, high);
+ }
+
+ /* clear all escrs (including those outside our concern) */
+ for (addr = MSR_P4_BSU_ESCR0 + stag;
+ addr < MSR_P4_IQ_ESCR0; addr += addr_increment()) {
+ wrmsr(addr, 0, 0);
+ }
+
+ /* On older models clear also MSR_P4_IQ_ESCR0/1 */
+ if (boot_cpu_data.x86_model < 0x3) {
+ wrmsr(MSR_P4_IQ_ESCR0, 0, 0);
+ wrmsr(MSR_P4_IQ_ESCR1, 0, 0);
+ }
+
+ for (addr = MSR_P4_RAT_ESCR0 + stag;
+ addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
+ wrmsr(addr, 0, 0);
+ }
+
+ for (addr = MSR_P4_MS_ESCR0 + stag;
+ addr <= MSR_P4_TC_ESCR1; addr += addr_increment()){
+ wrmsr(addr, 0, 0);
+ }
+
+ for (addr = MSR_P4_IX_ESCR0 + stag;
+ addr <= MSR_P4_CRU_ESCR3; addr += addr_increment()){
+ wrmsr(addr, 0, 0);
+ }
+
+ if (num_counters == NUM_COUNTERS_NON_HT) {
+ wrmsr(MSR_P4_CRU_ESCR4, 0, 0);
+ wrmsr(MSR_P4_CRU_ESCR5, 0, 0);
+ } else if (stag == 0) {
+ wrmsr(MSR_P4_CRU_ESCR4, 0, 0);
+ } else {
+ wrmsr(MSR_P4_CRU_ESCR5, 0, 0);
+ }
+
+ /* setup all counters */
+ for (i = 0 ; i < num_counters ; ++i) {
+ if (counter_config[i].enabled) {
+ reset_value[i] = counter_config[i].count;
+ pmc_setup_one_p4_counter(i);
+ CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
+ } else {
+ reset_value[i] = 0;
+ }
+ }
+}
+
+
+static int p4_check_ctrs(struct pt_regs * const regs,
+ struct op_msrs const * const msrs)
+{
+ unsigned long ctr, low, high, stag, real;
+ int i;
+
+ stag = get_stagger();
+
+ for (i = 0; i < num_counters; ++i) {
+
+ if (!reset_value[i])
+ continue;
+
+ /*
+ * there is some eccentricity in the hardware which
+ * requires that we perform 2 extra corrections:
+ *
+ * - check both the CCCR:OVF flag for overflow and the
+ * counter high bit for un-flagged overflows.
+ *
+ * - write the counter back twice to ensure it gets
+ * updated properly.
+ *
+ * the former seems to be related to extra NMIs happening
+ * during the current NMI; the latter is reported as errata
+ * N15 in intel doc 249199-029, pentium 4 specification
+ * update, though their suggested work-around does not
+ * appear to solve the problem.
+ */
+
+ real = VIRT_CTR(stag, i);
+
+ CCCR_READ(low, high, real);
+ CTR_READ(ctr, high, real);
+ if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
+ oprofile_add_sample(regs, i);
+ CTR_WRITE(reset_value[i], real);
+ CCCR_CLEAR_OVF(low);
+ CCCR_WRITE(low, high, real);
+ CTR_WRITE(reset_value[i], real);
+ }
+ }
+
+ /* P4 quirk: you have to re-unmask the apic vector */
+ apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+
+ /* See op_model_ppro.c */
+ return 1;
+}
+
+
+static void p4_start(struct op_msrs const * const msrs)
+{
+ unsigned int low, high, stag;
+ int i;
+
+ stag = get_stagger();
+
+ for (i = 0; i < num_counters; ++i) {
+ if (!reset_value[i])
+ continue;
+ CCCR_READ(low, high, VIRT_CTR(stag, i));
+ CCCR_SET_ENABLE(low);
+ CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+ }
+}
+
+
+static void p4_stop(struct op_msrs const * const msrs)
+{
+ unsigned int low, high, stag;
+ int i;
+
+ stag = get_stagger();
+
+ for (i = 0; i < num_counters; ++i) {
+ CCCR_READ(low, high, VIRT_CTR(stag, i));
+ CCCR_SET_DISABLE(low);
+ CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+ }
+}
+
+
+#ifdef CONFIG_SMP
+struct op_x86_model_spec const op_p4_ht2_spec = {
+ .num_counters = NUM_COUNTERS_HT2,
+ .num_controls = NUM_CONTROLS_HT2,
+ .fill_in_addresses = &p4_fill_in_addresses,
+ .setup_ctrs = &p4_setup_ctrs,
+ .check_ctrs = &p4_check_ctrs,
+ .start = &p4_start,
+ .stop = &p4_stop
+};
+#endif
+
+struct op_x86_model_spec const op_p4_spec = {
+ .num_counters = NUM_COUNTERS_NON_HT,
+ .num_controls = NUM_CONTROLS_NON_HT,
+ .fill_in_addresses = &p4_fill_in_addresses,
+ .setup_ctrs = &p4_setup_ctrs,
+ .check_ctrs = &p4_check_ctrs,
+ .start = &p4_start,
+ .stop = &p4_stop
+};
diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c
new file mode 100644
index 0000000..d719015
--- /dev/null
+++ b/arch/i386/oprofile/op_model_ppro.c
@@ -0,0 +1,143 @@
+/**
+ * @file op_model_ppro.h
+ * pentium pro / P6 model-specific MSR operations
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ * @author Philippe Elie
+ * @author Graydon Hoare
+ */
+
+#include <linux/oprofile.h>
+#include <asm/ptrace.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "op_x86_model.h"
+#include "op_counter.h"
+
+#define NUM_COUNTERS 2
+#define NUM_CONTROLS 2
+
+#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
+#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0)
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+
+#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_EVENT(val, e) (val |= e)
+
+static unsigned long reset_value[NUM_COUNTERS];
+
+static void ppro_fill_in_addresses(struct op_msrs * const msrs)
+{
+ msrs->counters[0].addr = MSR_P6_PERFCTR0;
+ msrs->counters[1].addr = MSR_P6_PERFCTR1;
+
+ msrs->controls[0].addr = MSR_P6_EVNTSEL0;
+ msrs->controls[1].addr = MSR_P6_EVNTSEL1;
+}
+
+
+static void ppro_setup_ctrs(struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ /* clear all counters */
+ for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+
+ /* avoid a false detection of ctr overflows in NMI handler */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ CTR_WRITE(1, msrs, i);
+ }
+
+ /* enable active counters */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (counter_config[i].enabled) {
+ reset_value[i] = counter_config[i].count;
+
+ CTR_WRITE(counter_config[i].count, msrs, i);
+
+ CTRL_READ(low, high, msrs, i);
+ CTRL_CLEAR(low);
+ CTRL_SET_ENABLE(low);
+ CTRL_SET_USR(low, counter_config[i].user);
+ CTRL_SET_KERN(low, counter_config[i].kernel);
+ CTRL_SET_UM(low, counter_config[i].unit_mask);
+ CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_WRITE(low, high, msrs, i);
+ }
+ }
+}
+
+
+static int ppro_check_ctrs(struct pt_regs * const regs,
+ struct op_msrs const * const msrs)
+{
+ unsigned int low, high;
+ int i;
+
+ for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ CTR_READ(low, high, msrs, i);
+ if (CTR_OVERFLOWED(low)) {
+ oprofile_add_sample(regs, i);
+ CTR_WRITE(reset_value[i], msrs, i);
+ }
+ }
+
+ /* Only P6 based Pentium M need to re-unmask the apic vector but it
+ * doesn't hurt other P6 variant */
+ apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+
+ /* We can't work out if we really handled an interrupt. We
+ * might have caught a *second* counter just after overflowing
+ * the interrupt for this counter then arrives
+ * and we don't find a counter that's overflowed, so we
+ * would return 0 and get dazed + confused. Instead we always
+ * assume we found an overflow. This sucks.
+ */
+ return 1;
+}
+
+
+static void ppro_start(struct op_msrs const * const msrs)
+{
+ unsigned int low,high;
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_ACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+}
+
+
+static void ppro_stop(struct op_msrs const * const msrs)
+{
+ unsigned int low,high;
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_INACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+}
+
+
+struct op_x86_model_spec const op_ppro_spec = {
+ .num_counters = NUM_COUNTERS,
+ .num_controls = NUM_CONTROLS,
+ .fill_in_addresses = &ppro_fill_in_addresses,
+ .setup_ctrs = &ppro_setup_ctrs,
+ .check_ctrs = &ppro_check_ctrs,
+ .start = &ppro_start,
+ .stop = &ppro_stop
+};
diff --git a/arch/i386/oprofile/op_x86_model.h b/arch/i386/oprofile/op_x86_model.h
new file mode 100644
index 0000000..123b7e9
--- /dev/null
+++ b/arch/i386/oprofile/op_x86_model.h
@@ -0,0 +1,50 @@
+/**
+ * @file op_x86_model.h
+ * interface to x86 model-specific MSR operations
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Graydon Hoare
+ */
+
+#ifndef OP_X86_MODEL_H
+#define OP_X86_MODEL_H
+
+struct op_saved_msr {
+ unsigned int high;
+ unsigned int low;
+};
+
+struct op_msr {
+ unsigned long addr;
+ struct op_saved_msr saved;
+};
+
+struct op_msrs {
+ struct op_msr * counters;
+ struct op_msr * controls;
+};
+
+struct pt_regs;
+
+/* The model vtable abstracts the differences between
+ * various x86 CPU model's perfctr support.
+ */
+struct op_x86_model_spec {
+ unsigned int const num_counters;
+ unsigned int const num_controls;
+ void (*fill_in_addresses)(struct op_msrs * const msrs);
+ void (*setup_ctrs)(struct op_msrs const * const msrs);
+ int (*check_ctrs)(struct pt_regs * const regs,
+ struct op_msrs const * const msrs);
+ void (*start)(struct op_msrs const * const msrs);
+ void (*stop)(struct op_msrs const * const msrs);
+};
+
+extern struct op_x86_model_spec const op_ppro_spec;
+extern struct op_x86_model_spec const op_p4_spec;
+extern struct op_x86_model_spec const op_p4_ht2_spec;
+extern struct op_x86_model_spec const op_athlon_spec;
+
+#endif /* OP_X86_MODEL_H */
diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
new file mode 100644
index 0000000..1bff03f
--- /dev/null
+++ b/arch/i386/pci/Makefile
@@ -0,0 +1,14 @@
+obj-y := i386.o
+
+obj-$(CONFIG_PCI_BIOS) += pcbios.o
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o
+obj-$(CONFIG_PCI_DIRECT) += direct.o
+
+pci-y := fixup.o
+pci-$(CONFIG_ACPI_PCI) += acpi.o
+pci-y += legacy.o irq.o
+
+pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
+pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+obj-y += $(pci-y) common.o
diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c
new file mode 100644
index 0000000..2db65ec
--- /dev/null
+++ b/arch/i386/pci/acpi.c
@@ -0,0 +1,53 @@
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/hw_irq.h>
+#include "pci.h"
+
+struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
+{
+ if (domain != 0) {
+ printk(KERN_WARNING "PCI: Multiple domains not supported\n");
+ return NULL;
+ }
+
+ return pcibios_scan_root(busnum);
+}
+
+extern int pci_routeirq;
+static int __init pci_acpi_init(void)
+{
+ struct pci_dev *dev = NULL;
+
+ if (pcibios_scanned)
+ return 0;
+
+ if (acpi_noirq)
+ return 0;
+
+ printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+ acpi_irq_penalty_init();
+ pcibios_scanned++;
+ pcibios_enable_irq = acpi_pci_irq_enable;
+
+ if (pci_routeirq) {
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+ acpi_pci_irq_enable(dev);
+ } else
+ printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n");
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_ioapic)
+ print_IO_APIC();
+#endif
+
+ return 0;
+}
+subsys_initcall(pci_acpi_init);
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
new file mode 100644
index 0000000..720975e
--- /dev/null
+++ b/arch/i386/pci/common.c
@@ -0,0 +1,251 @@
+/*
+ * Low-Level PCI Support for PC
+ *
+ * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+
+#include <asm/acpi.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+
+#include "pci.h"
+
+#ifdef CONFIG_PCI_BIOS
+extern void pcibios_sort(void);
+#endif
+
+unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
+ PCI_PROBE_MMCONF;
+
+int pci_routeirq;
+int pcibios_last_bus = -1;
+struct pci_bus *pci_root_bus = NULL;
+struct pci_raw_ops *raw_pci_ops;
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+ return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+ return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
+}
+
+struct pci_ops pci_root_ops = {
+ .read = pci_read,
+ .write = pci_write,
+};
+
+/*
+ * legacy, numa, and acpi all want to call pcibios_scan_root
+ * from their initcalls. This flag prevents that.
+ */
+int pcibios_scanned;
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+DEFINE_SPINLOCK(pci_config_lock);
+
+/*
+ * Several buggy motherboards address only 16 devices and mirror
+ * them to next 16 IDs. We try to detect this `feature' on all
+ * primary buses (those containing host bridges as they are
+ * expected to be unique) and remove the ghost devices.
+ */
+
+static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
+{
+ struct list_head *ln, *mn;
+ struct pci_dev *d, *e;
+ int mirror = PCI_DEVFN(16,0);
+ int seen_host_bridge = 0;
+ int i;
+
+ DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
+ list_for_each(ln, &b->devices) {
+ d = pci_dev_b(ln);
+ if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+ seen_host_bridge++;
+ for (mn=ln->next; mn != &b->devices; mn=mn->next) {
+ e = pci_dev_b(mn);
+ if (e->devfn != d->devfn + mirror ||
+ e->vendor != d->vendor ||
+ e->device != d->device ||
+ e->class != d->class)
+ continue;
+ for(i=0; i<PCI_NUM_RESOURCES; i++)
+ if (e->resource[i].start != d->resource[i].start ||
+ e->resource[i].end != d->resource[i].end ||
+ e->resource[i].flags != d->resource[i].flags)
+ continue;
+ break;
+ }
+ if (mn == &b->devices)
+ return;
+ }
+ if (!seen_host_bridge)
+ return;
+ printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
+
+ ln = &b->devices;
+ while (ln->next != &b->devices) {
+ d = pci_dev_b(ln->next);
+ if (d->devfn >= mirror) {
+ list_del(&d->global_list);
+ list_del(&d->bus_list);
+ kfree(d);
+ } else
+ ln = ln->next;
+ }
+}
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
+{
+ pcibios_fixup_ghosts(b);
+ pci_read_bridge_bases(b);
+}
+
+
+struct pci_bus * __devinit pcibios_scan_root(int busnum)
+{
+ struct pci_bus *bus = NULL;
+
+ while ((bus = pci_find_next_bus(bus)) != NULL) {
+ if (bus->number == busnum) {
+ /* Already scanned */
+ return bus;
+ }
+ }
+
+ printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
+
+ return pci_scan_bus(busnum, &pci_root_ops, NULL);
+}
+
+extern u8 pci_cache_line_size;
+
+static int __init pcibios_init(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ if (!raw_pci_ops) {
+ printk("PCI: System does not support PCI\n");
+ return 0;
+ }
+
+ /*
+ * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
+ * and P4. It's also good for 386/486s (which actually have 16)
+ * as quite a few PCI devices do not support smaller values.
+ */
+ pci_cache_line_size = 32 >> 2;
+ if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
+ pci_cache_line_size = 64 >> 2; /* K7 & K8 */
+ else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
+ pci_cache_line_size = 128 >> 2; /* P4 */
+
+ pcibios_resource_survey();
+
+#ifdef CONFIG_PCI_BIOS
+ if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
+ pcibios_sort();
+#endif
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+char * __devinit pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ }
+#ifdef CONFIG_PCI_BIOS
+ else if (!strcmp(str, "bios")) {
+ pci_probe = PCI_PROBE_BIOS;
+ return NULL;
+ } else if (!strcmp(str, "nobios")) {
+ pci_probe &= ~PCI_PROBE_BIOS;
+ return NULL;
+ } else if (!strcmp(str, "nosort")) {
+ pci_probe |= PCI_NO_SORT;
+ return NULL;
+ } else if (!strcmp(str, "biosirq")) {
+ pci_probe |= PCI_BIOS_IRQ_SCAN;
+ return NULL;
+ }
+#endif
+#ifdef CONFIG_PCI_DIRECT
+ else if (!strcmp(str, "conf1")) {
+ pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
+ return NULL;
+ }
+ else if (!strcmp(str, "conf2")) {
+ pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
+ return NULL;
+ }
+#endif
+#ifdef CONFIG_PCI_MMCONFIG
+ else if (!strcmp(str, "nommconf")) {
+ pci_probe &= ~PCI_PROBE_MMCONF;
+ return NULL;
+ }
+#endif
+ else if (!strcmp(str, "noacpi")) {
+ acpi_noirq_set();
+ return NULL;
+ }
+#ifndef CONFIG_X86_VISWS
+ else if (!strcmp(str, "usepirqmask")) {
+ pci_probe |= PCI_USE_PIRQ_MASK;
+ return NULL;
+ } else if (!strncmp(str, "irqmask=", 8)) {
+ pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
+ return NULL;
+ } else if (!strncmp(str, "lastbus=", 8)) {
+ pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+ return NULL;
+ }
+#endif
+ else if (!strcmp(str, "rom")) {
+ pci_probe |= PCI_ASSIGN_ROMS;
+ return NULL;
+ } else if (!strcmp(str, "assign-busses")) {
+ pci_probe |= PCI_ASSIGN_ALL_BUSSES;
+ return NULL;
+ } else if (!strcmp(str, "routeirq")) {
+ pci_routeirq = 1;
+ return NULL;
+ }
+ return str;
+}
+
+unsigned int pcibios_assign_all_busses(void)
+{
+ return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ return err;
+
+ return pcibios_enable_irq(dev);
+}
diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c
new file mode 100644
index 0000000..30b7e9b
--- /dev/null
+++ b/arch/i386/pci/direct.c
@@ -0,0 +1,289 @@
+/*
+ * direct.c - Low-level direct PCI config space access
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include "pci.h"
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+ (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+static int pci_conf1_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ unsigned long flags;
+
+ if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
+
+ switch (len) {
+ case 1:
+ *value = inb(0xCFC + (reg & 3));
+ break;
+ case 2:
+ *value = inw(0xCFC + (reg & 2));
+ break;
+ case 4:
+ *value = inl(0xCFC);
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+static int pci_conf1_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ unsigned long flags;
+
+ if ((bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
+
+ switch (len) {
+ case 1:
+ outb((u8)value, 0xCFC + (reg & 3));
+ break;
+ case 2:
+ outw((u16)value, 0xCFC + (reg & 2));
+ break;
+ case 4:
+ outl((u32)value, 0xCFC);
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+#undef PCI_CONF1_ADDRESS
+
+struct pci_raw_ops pci_direct_conf1 = {
+ .read = pci_conf1_read,
+ .write = pci_conf1_write,
+};
+
+
+/*
+ * Functions for accessing PCI configuration space with type 2 accesses
+ */
+
+#define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg)
+
+static int pci_conf2_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ unsigned long flags;
+ int dev, fn;
+
+ if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ dev = PCI_SLOT(devfn);
+ fn = PCI_FUNC(devfn);
+
+ if (dev & 0x10)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outb((u8)(0xF0 | (fn << 1)), 0xCF8);
+ outb((u8)bus, 0xCFA);
+
+ switch (len) {
+ case 1:
+ *value = inb(PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ case 2:
+ *value = inw(PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ case 4:
+ *value = inl(PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ }
+
+ outb(0, 0xCF8);
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+static int pci_conf2_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ unsigned long flags;
+ int dev, fn;
+
+ if ((bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ dev = PCI_SLOT(devfn);
+ fn = PCI_FUNC(devfn);
+
+ if (dev & 0x10)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outb((u8)(0xF0 | (fn << 1)), 0xCF8);
+ outb((u8)bus, 0xCFA);
+
+ switch (len) {
+ case 1:
+ outb((u8)value, PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ case 2:
+ outw((u16)value, PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ case 4:
+ outl((u32)value, PCI_CONF2_ADDRESS(dev, reg));
+ break;
+ }
+
+ outb(0, 0xCF8);
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+#undef PCI_CONF2_ADDRESS
+
+static struct pci_raw_ops pci_direct_conf2 = {
+ .read = pci_conf2_read,
+ .write = pci_conf2_write,
+};
+
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_raw_ops *o)
+{
+ u32 x = 0;
+ int devfn;
+
+ if (pci_probe & PCI_NO_CHECKS)
+ return 1;
+
+ for (devfn = 0; devfn < 0x100; devfn++) {
+ if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x))
+ continue;
+ if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)
+ return 1;
+
+ if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x))
+ continue;
+ if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)
+ return 1;
+ }
+
+ DBG("PCI: Sanity check failed\n");
+ return 0;
+}
+
+static int __init pci_check_type1(void)
+{
+ unsigned long flags;
+ unsigned int tmp;
+ int works = 0;
+
+ local_irq_save(flags);
+
+ outb(0x01, 0xCFB);
+ tmp = inl(0xCF8);
+ outl(0x80000000, 0xCF8);
+ if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) {
+ works = 1;
+ }
+ outl(tmp, 0xCF8);
+ local_irq_restore(flags);
+
+ return works;
+}
+
+static int __init pci_check_type2(void)
+{
+ unsigned long flags;
+ int works = 0;
+
+ local_irq_save(flags);
+
+ outb(0x00, 0xCFB);
+ outb(0x00, 0xCF8);
+ outb(0x00, 0xCFA);
+ if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 &&
+ pci_sanity_check(&pci_direct_conf2)) {
+ works = 1;
+ }
+
+ local_irq_restore(flags);
+
+ return works;
+}
+
+static int __init pci_direct_init(void)
+{
+ struct resource *region, *region2;
+
+ if ((pci_probe & PCI_PROBE_CONF1) == 0)
+ goto type2;
+ region = request_region(0xCF8, 8, "PCI conf1");
+ if (!region)
+ goto type2;
+
+ if (pci_check_type1()) {
+ printk(KERN_INFO "PCI: Using configuration type 1\n");
+ raw_pci_ops = &pci_direct_conf1;
+ return 0;
+ }
+ release_resource(region);
+
+ type2:
+ if ((pci_probe & PCI_PROBE_CONF2) == 0)
+ goto out;
+ region = request_region(0xCF8, 4, "PCI conf2");
+ if (!region)
+ goto out;
+ region2 = request_region(0xC000, 0x1000, "PCI conf2");
+ if (!region2)
+ goto fail2;
+
+ if (pci_check_type2()) {
+ printk(KERN_INFO "PCI: Using configuration type 2\n");
+ raw_pci_ops = &pci_direct_conf2;
+ return 0;
+ }
+
+ release_resource(region2);
+ fail2:
+ release_resource(region);
+
+ out:
+ return 0;
+}
+
+arch_initcall(pci_direct_init);
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
new file mode 100644
index 0000000..be52c5a
--- /dev/null
+++ b/arch/i386/pci/fixup.c
@@ -0,0 +1,386 @@
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include "pci.h"
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+ /*
+ * i450NX -- Find and scan all secondary buses on all PXB's.
+ */
+ int pxb, reg;
+ u8 busno, suba, subb;
+
+ printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+ reg = 0xd0;
+ for(pxb=0; pxb<2; pxb++) {
+ pci_read_config_byte(d, reg++, &busno);
+ pci_read_config_byte(d, reg++, &suba);
+ pci_read_config_byte(d, reg++, &subb);
+ DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ if (busno)
+ pci_scan_bus(busno, &pci_root_ops, NULL); /* Bus A */
+ if (suba < subb)
+ pci_scan_bus(suba+1, &pci_root_ops, NULL); /* Bus B */
+ }
+ pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+static void __devinit pci_fixup_i450gx(struct pci_dev *d)
+{
+ /*
+ * i450GX and i450KX -- Find and scan all secondary buses.
+ * (called separately for each PCI bridge found)
+ */
+ u8 busno;
+ pci_read_config_byte(d, 0x4a, &busno);
+ printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
+ pci_scan_bus(busno, &pci_root_ops, NULL);
+ pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
+
+static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
+{
+ /*
+ * UM8886BF IDE controller sets region type bits incorrectly,
+ * therefore they look like memory despite of them being I/O.
+ */
+ int i;
+
+ printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d));
+ for(i=0; i<4; i++)
+ d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+
+static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
+{
+ /*
+ * NCR 53C810 returns class code 0 (at least on some systems).
+ * Fix class to be PCI_CLASS_STORAGE_SCSI
+ */
+ if (!d->class) {
+ printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d));
+ d->class = PCI_CLASS_STORAGE_SCSI << 8;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
+
+static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ DBG("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+static void __devinit pci_fixup_ide_trash(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * Runs the fixup only for the first IDE controller
+ * (Shai Fultheim - shai@ftcon.com)
+ */
+ static int called = 0;
+ if (called)
+ return;
+ called = 1;
+
+ /*
+ * There exist PCI IDE controllers which have utter garbage
+ * in first four base registers. Ignore that.
+ */
+ DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d));
+ for(i=0; i<4; i++)
+ d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash);
+
+static void __devinit pci_fixup_latency(struct pci_dev *d)
+{
+ /*
+ * SiS 5597 and 5598 chipsets require latency timer set to
+ * at most 32 to avoid lockups.
+ */
+ DBG("PCI: Setting max latency to 32\n");
+ pcibios_max_latency = 32;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+
+static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
+{
+ /*
+ * PIIX4 ACPI device: hardwired IRQ9
+ */
+ d->irq = 9;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
+
+/*
+ * Addresses issues with problems in the memory write queue timer in
+ * certain VIA Northbridges. This bugfix is per VIA's specifications,
+ * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
+ * to trigger a bug in its integrated ProSavage video card, which
+ * causes screen corruption. We only clear bits 6 and 7 for that chipset,
+ * until VIA can provide us with definitive information on why screen
+ * corruption occurs, and what exactly those bits do.
+ *
+ * VIA 8363,8622,8361 Northbridges:
+ * - bits 5, 6, 7 at offset 0x55 need to be turned off
+ * VIA 8367 (KT266x) Northbridges:
+ * - bits 5, 6, 7 at offset 0x95 need to be turned off
+ * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
+ * - bits 6, 7 at offset 0x55 need to be turned off
+ */
+
+#define VIA_8363_KL133_REVISION_ID 0x81
+#define VIA_8363_KM133_REVISION_ID 0x84
+
+static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d)
+{
+ u8 v;
+ u8 revision;
+ int where = 0x55;
+ int mask = 0x1f; /* clear bits 5, 6, 7 by default */
+
+ pci_read_config_byte(d, PCI_REVISION_ID, &revision);
+
+ if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
+ /* fix pci bus latency issues resulted by NB bios error
+ it appears on bug free^Wreduced kt266x's bios forces
+ NB latency to zero */
+ pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
+
+ where = 0x95; /* the memory write queue timer register is
+ different for the KT266x's: 0x95 not 0x55 */
+ } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
+ (revision == VIA_8363_KL133_REVISION_ID ||
+ revision == VIA_8363_KM133_REVISION_ID)) {
+ mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
+ causes screen corruption on the KL133/KM133 */
+ }
+
+ pci_read_config_byte(d, where, &v);
+ if (v & ~mask) {
+ printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
+ d->device, revision, where, v, mask, v & mask);
+ v &= mask;
+ pci_write_config_byte(d, where, v);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+
+/*
+ * For some reasons Intel decided that certain parts of their
+ * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
+ * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
+ * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
+ * to Intel terminology. These devices do forward all addresses from
+ * system to PCI bus no matter what are their window settings, so they are
+ * "transparent" (or subtractive decoding) from programmers point of view.
+ */
+static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ (dev->device & 0xff00) == 0x2400)
+ dev->transparent = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge);
+
+/*
+ * Fixup for C1 Halt Disconnect problem on nForce2 systems.
+ *
+ * From information provided by "Allen Martin" <AMartin@nvidia.com>:
+ *
+ * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
+ * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
+ * This allows the state-machine and timer to return to a proper state within
+ * 80 ns of the CONNECT and probe appearing together. Since the CPU will not
+ * issue another HALT within 80 ns of the initial HALT, the failure condition
+ * is avoided.
+ */
+static void __init pci_fixup_nforce2(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * Chip Old value New value
+ * C17 0x1F0FFF01 0x1F01FF01
+ * C18D 0x9F0FFF01 0x9F01FF01
+ *
+ * Northbridge chip version may be determined by
+ * reading the PCI revision ID (0xC1 or greater is C18D).
+ */
+ pci_read_config_dword(dev, 0x6c, &val);
+
+ /*
+ * Apply fixup if needed, but don't touch disconnect state
+ */
+ if ((val & 0x00FF0000) != 0x00010000) {
+ printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
+ pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+
+/* Max PCI Express root ports */
+#define MAX_PCIEROOT 6
+static int quirk_aspm_offset[MAX_PCIEROOT << 3];
+
+#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b)
+
+static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+ return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
+}
+
+/*
+ * Replace the original pci bus ops for write with a new one that will filter
+ * the request to insure ASPM cannot be enabled.
+ */
+static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+ u8 offset;
+
+ offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
+
+ if ((offset) && (where == offset))
+ value = value & 0xfffffffc;
+
+ return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
+}
+
+static struct pci_ops quirk_pcie_aspm_ops = {
+ .read = quirk_pcie_aspm_read,
+ .write = quirk_pcie_aspm_write,
+};
+
+/*
+ * Prevents PCI Express ASPM (Active State Power Management) being enabled.
+ *
+ * Save the register offset, where the ASPM control bits are located,
+ * for each PCI Express device that is in the device list of
+ * the root port in an array for fast indexing. Replace the bus ops
+ * with the modified one.
+ */
+static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
+{
+ int cap_base, i;
+ struct pci_bus *pbus;
+ struct pci_dev *dev;
+
+ if ((pbus = pdev->subordinate) == NULL)
+ return;
+
+ /*
+ * Check if the DID of pdev matches one of the six root ports. This
+ * check is needed in the case this function is called directly by the
+ * hot-plug driver.
+ */
+ if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
+ (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
+ return;
+
+ if (list_empty(&pbus->devices)) {
+ /*
+ * If no device is attached to the root port at power-up or
+ * after hot-remove, the pbus->devices is empty and this code
+ * will set the offsets to zero and the bus ops to parent's bus
+ * ops, which is unmodified.
+ */
+ for (i= GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
+ quirk_aspm_offset[i] = 0;
+
+ pbus->ops = pbus->parent->ops;
+ } else {
+ /*
+ * If devices are attached to the root port at power-up or
+ * after hot-add, the code loops through the device list of
+ * each root port to save the register offsets and replace the
+ * bus ops.
+ */
+ list_for_each_entry(dev, &pbus->devices, bus_list) {
+ /* There are 0 to 8 devices attached to this bus */
+ cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)]= cap_base + 0x10;
+ }
+ pbus->ops = &quirk_pcie_aspm_ops;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk );
+
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ */
+
+static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ struct pci_bus *bus;
+ u16 config;
+
+ if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+ return;
+
+ /* Is VGA routed to us? */
+ bus = pdev->bus;
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &config);
+ if (!(config & PCI_BRIDGE_CTL_VGA))
+ return;
+ }
+ bus = bus->parent;
+ }
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
new file mode 100644
index 0000000..c205ea7
--- /dev/null
+++ b/arch/i386/pci/i386.c
@@ -0,0 +1,304 @@
+/*
+ * Low-Level PCI Access for i386 machines
+ *
+ * Copyright 1993, 1994 Drew Eckhardt
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * Drew@Colorado.EDU
+ * +1 (303) 786-7975
+ *
+ * Drew's work was sponsored by:
+ * iX Multiuser Multitasking Magazine
+ * Hannover, Germany
+ * hm@ix.de
+ *
+ * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+
+#include "pci.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void
+pcibios_align_resource(void *data, struct resource *res,
+ unsigned long size, unsigned long align)
+{
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r, *pr;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ if ((dev = bus->self)) {
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->start)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0)
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r, *pr;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for(idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned at all */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
+ r->start, r->end, r->flags, disabled, pass);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region, but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(dev, dev->rom_base_reg, ®);
+ pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ int idx;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ int class = dev->class >> 8;
+
+ /* Don't touch classless devices and host bridges */
+ if (!class || class == PCI_CLASS_BRIDGE_HOST)
+ continue;
+
+ for(idx=0; idx<6; idx++) {
+ r = &dev->resource[idx];
+
+ /*
+ * Don't touch IDE controllers and I/O ports of video cards!
+ */
+ if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
+ (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
+ continue;
+
+ /*
+ * We shall assign a new address to this resource, either because
+ * the BIOS forgot to do so or because we have decided the old
+ * address was unusable for some reason.
+ */
+ if (!r->start && r->end)
+ pci_assign_resource(dev, idx);
+ }
+
+ if (pci_probe & PCI_ASSIGN_ROMS) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ r->end -= r->start;
+ r->start = 0;
+ if (r->end)
+ pci_assign_resource(dev, PCI_ROM_RESOURCE);
+ }
+ }
+ return 0;
+}
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+}
+
+/**
+ * called in fs_initcall (one below subsys_initcall),
+ * give a chance for motherboard reserve resources
+ */
+fs_initcall(pcibios_assign_resources);
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for(idx=0; idx<6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /* I/O space cannot be accessed via normal processor loads and
+ * stores on this platform.
+ */
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ /* Leave vm_pgoff as-is, the PCI space address is the physical
+ * address on this platform.
+ */
+ vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO);
+
+ prot = pgprot_val(vma->vm_page_prot);
+ if (boot_cpu_data.x86 > 3)
+ prot |= _PAGE_PCD | _PAGE_PWT;
+ vma->vm_page_prot = __pgprot(prot);
+
+ /* Write-combine setting is ignored, it is changed via the mtrr
+ * interfaces on this platform.
+ */
+ if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
new file mode 100644
index 0000000..1128451
--- /dev/null
+++ b/arch/i386/pci/irq.c
@@ -0,0 +1,1119 @@
+/*
+ * Low-Level PCI Support for PC -- Routing of Interrupts
+ *
+ * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/dmi.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/io_apic.h>
+#include <asm/hw_irq.h>
+#include <linux/acpi.h>
+
+#include "pci.h"
+
+#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
+#define PIRQ_VERSION 0x0100
+
+static int broken_hp_bios_irq9;
+static int acer_tm360_irqrouting;
+
+static struct irq_routing_table *pirq_table;
+
+static int pirq_enable_irq(struct pci_dev *dev);
+
+/*
+ * Never use: 0, 1, 2 (timer, keyboard, and cascade)
+ * Avoid using: 13, 14 and 15 (FP error and IDE).
+ * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse)
+ */
+unsigned int pcibios_irq_mask = 0xfff8;
+
+static int pirq_penalty[16] = {
+ 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
+ 0, 0, 0, 0, 1000, 100000, 100000, 100000
+};
+
+struct irq_router {
+ char *name;
+ u16 vendor, device;
+ int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
+ int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+};
+
+struct irq_router_handler {
+ u16 vendor;
+ int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
+};
+
+int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
+
+/*
+ * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
+ */
+
+static struct irq_routing_table * __init pirq_find_routing_table(void)
+{
+ u8 *addr;
+ struct irq_routing_table *rt;
+ int i;
+ u8 sum;
+
+ for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+ rt = (struct irq_routing_table *) addr;
+ if (rt->signature != PIRQ_SIGNATURE ||
+ rt->version != PIRQ_VERSION ||
+ rt->size % 16 ||
+ rt->size < sizeof(struct irq_routing_table))
+ continue;
+ sum = 0;
+ for(i=0; i<rt->size; i++)
+ sum += addr[i];
+ if (!sum) {
+ DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ return rt;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * If we have a IRQ routing table, use it to search for peer host
+ * bridges. It's a gross hack, but since there are no other known
+ * ways how to get a list of buses, we have to go this way.
+ */
+
+static void __init pirq_peer_trick(void)
+{
+ struct irq_routing_table *rt = pirq_table;
+ u8 busmap[256];
+ int i;
+ struct irq_info *e;
+
+ memset(busmap, 0, sizeof(busmap));
+ for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+ e = &rt->slots[i];
+#ifdef DEBUG
+ {
+ int j;
+ DBG("%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
+ for(j=0; j<4; j++)
+ DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
+ DBG("\n");
+ }
+#endif
+ busmap[e->bus] = 1;
+ }
+ for(i = 1; i < 256; i++) {
+ if (!busmap[i] || pci_find_bus(0, i))
+ continue;
+ if (pci_scan_bus(i, &pci_root_ops, NULL))
+ printk(KERN_INFO "PCI: Discovered primary peer bus %02x [IRQ]\n", i);
+ }
+ pcibios_last_bus = -1;
+}
+
+/*
+ * Code for querying and setting of IRQ routes on various interrupt routers.
+ */
+
+void eisa_set_level_irq(unsigned int irq)
+{
+ unsigned char mask = 1 << (irq & 7);
+ unsigned int port = 0x4d0 + (irq >> 3);
+ unsigned char val;
+ static u16 eisa_irq_mask;
+
+ if (irq >= 16 || (1 << irq) & eisa_irq_mask)
+ return;
+
+ eisa_irq_mask |= (1 << irq);
+ printk("PCI: setting IRQ %u as level-triggered\n", irq);
+ val = inb(port);
+ if (!(val & mask)) {
+ DBG(" -> edge");
+ outb(val | mask, port);
+ }
+}
+
+/*
+ * Common IRQ routing practice: nybbles in config space,
+ * offset by some magic constant.
+ */
+static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
+{
+ u8 x;
+ unsigned reg = offset + (nr >> 1);
+
+ pci_read_config_byte(router, reg, &x);
+ return (nr & 1) ? (x >> 4) : (x & 0xf);
+}
+
+static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+{
+ u8 x;
+ unsigned reg = offset + (nr >> 1);
+
+ pci_read_config_byte(router, reg, &x);
+ x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val);
+ pci_write_config_byte(router, reg, x);
+}
+
+/*
+ * ALI pirq entries are damn ugly, and completely undocumented.
+ * This has been figured out from pirq tables, and it's not a pretty
+ * picture.
+ */
+static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ static unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
+
+ return irqmap[read_config_nybble(router, 0x48, pirq-1)];
+}
+
+static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ static unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
+ unsigned int val = irqmap[irq];
+
+ if (val) {
+ write_config_nybble(router, 0x48, pirq-1, val);
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * The Intel PIIX4 pirq rules are fairly simple: "pirq" is
+ * just a pointer to the config space.
+ */
+static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ u8 x;
+
+ pci_read_config_byte(router, pirq, &x);
+ return (x < 16) ? x : 0;
+}
+
+static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ pci_write_config_byte(router, pirq, irq);
+ return 1;
+}
+
+/*
+ * The VIA pirq rules are nibble-based, like ALI,
+ * but without the ugly irq number munging.
+ * However, PIRQD is in the upper instead of lower 4 bits.
+ */
+static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq);
+}
+
+static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
+ return 1;
+}
+
+/*
+ * ITE 8330G pirq rules are nibble-based
+ * FIXME: pirqmap may be { 1, 0, 3, 2 },
+ * 2+3 are both mapped to irq 9 on my system
+ */
+static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ static unsigned char pirqmap[4] = { 1, 0, 2, 3 };
+ return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+}
+
+static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ static unsigned char pirqmap[4] = { 1, 0, 2, 3 };
+ write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
+ return 1;
+}
+
+/*
+ * OPTI: high four bits are nibble pointer..
+ * I wonder what the low bits do?
+ */
+static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ return read_config_nybble(router, 0xb8, pirq >> 4);
+}
+
+static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ write_config_nybble(router, 0xb8, pirq >> 4, irq);
+ return 1;
+}
+
+/*
+ * Cyrix: nibble offset 0x5C
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
+ * 0x5D bits 7:4 is INTD bits 3:0 is INTC
+ */
+static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ return read_config_nybble(router, 0x5C, (pirq-1)^1);
+}
+
+static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
+ return 1;
+}
+
+/*
+ * PIRQ routing for SiS 85C503 router used in several SiS chipsets.
+ * We have to deal with the following issues here:
+ * - vendors have different ideas about the meaning of link values
+ * - some onboard devices (integrated in the chipset) have special
+ * links and are thus routed differently (i.e. not via PCI INTA-INTD)
+ * - different revision of the router have a different layout for
+ * the routing registers, particularly for the onchip devices
+ *
+ * For all routing registers the common thing is we have one byte
+ * per routeable link which is defined as:
+ * bit 7 IRQ mapping enabled (0) or disabled (1)
+ * bits [6:4] reserved (sometimes used for onchip devices)
+ * bits [3:0] IRQ to map to
+ * allowed: 3-7, 9-12, 14-15
+ * reserved: 0, 1, 2, 8, 13
+ *
+ * The config-space registers located at 0x41/0x42/0x43/0x44 are
+ * always used to route the normal PCI INT A/B/C/D respectively.
+ * Apparently there are systems implementing PCI routing table using
+ * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
+ * We try our best to handle both link mappings.
+ *
+ * Currently (2003-05-21) it appears most SiS chipsets follow the
+ * definition of routing registers from the SiS-5595 southbridge.
+ * According to the SiS 5595 datasheets the revision id's of the
+ * router (ISA-bridge) should be 0x01 or 0xb0.
+ *
+ * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1.
+ * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets.
+ * They seem to work with the current routing code. However there is
+ * some concern because of the two USB-OHCI HCs (original SiS 5595
+ * had only one). YMMV.
+ *
+ * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1:
+ *
+ * 0x61: IDEIRQ:
+ * bits [6:5] must be written 01
+ * bit 4 channel-select primary (0), secondary (1)
+ *
+ * 0x62: USBIRQ:
+ * bit 6 OHCI function disabled (0), enabled (1)
+ *
+ * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
+ *
+ * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
+ *
+ * We support USBIRQ (in addition to INTA-INTD) and keep the
+ * IDE, ACPI and DAQ routing untouched as set by the BIOS.
+ *
+ * Currently the only reported exception is the new SiS 65x chipset
+ * which includes the SiS 69x southbridge. Here we have the 85C503
+ * router revision 0x04 and there are changes in the register layout
+ * mostly related to the different USB HCs with USB 2.0 support.
+ *
+ * Onchip routing for router rev-id 0x04 (try-and-error observation)
+ *
+ * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs
+ * bit 6-4 are probably unused, not like 5595
+ */
+
+#define PIRQ_SIS_IRQ_MASK 0x0f
+#define PIRQ_SIS_IRQ_DISABLE 0x80
+#define PIRQ_SIS_USB_ENABLE 0x40
+
+static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ u8 x;
+ int reg;
+
+ reg = pirq;
+ if (reg >= 0x01 && reg <= 0x04)
+ reg += 0x40;
+ pci_read_config_byte(router, reg, &x);
+ return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
+}
+
+static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ u8 x;
+ int reg;
+
+ reg = pirq;
+ if (reg >= 0x01 && reg <= 0x04)
+ reg += 0x40;
+ pci_read_config_byte(router, reg, &x);
+ x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE);
+ x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE;
+ pci_write_config_byte(router, reg, x);
+ return 1;
+}
+
+
+/*
+ * VLSI: nibble offset 0x74 - educated guess due to routing table and
+ * config space of VLSI 82C534 PCI-bridge/router (1004:0102)
+ * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard
+ * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6
+ * for the busbridge to the docking station.
+ */
+
+static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ if (pirq > 8) {
+ printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ return 0;
+ }
+ return read_config_nybble(router, 0x74, pirq-1);
+}
+
+static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ if (pirq > 8) {
+ printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ return 0;
+ }
+ write_config_nybble(router, 0x74, pirq-1, irq);
+ return 1;
+}
+
+/*
+ * ServerWorks: PCI interrupts mapped to system IRQ lines through Index
+ * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register
+ * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect
+ * register is a straight binary coding of desired PIC IRQ (low nibble).
+ *
+ * The 'link' value in the PIRQ table is already in the correct format
+ * for the Index register. There are some special index values:
+ * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1,
+ * and 0x03 for SMBus.
+ */
+static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ outb_p(pirq, 0xc00);
+ return inb(0xc01) & 0xf;
+}
+
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ outb_p(pirq, 0xc00);
+ outb_p(irq, 0xc01);
+ return 1;
+}
+
+/* Support for AMD756 PCI IRQ Routing
+ * Jhon H. Caicedo <jhcaiced@osso.org.co>
+ * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced)
+ * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced)
+ * The AMD756 pirq rules are nibble-based
+ * offset 0x56 0-3 PIRQA 4-7 PIRQB
+ * offset 0x57 0-3 PIRQC 4-7 PIRQD
+ */
+static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ u8 irq;
+ irq = 0;
+ if (pirq <= 4)
+ {
+ irq = read_config_nybble(router, 0x56, pirq - 1);
+ }
+ printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
+ dev->vendor, dev->device, pirq, irq);
+ return irq;
+}
+
+static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
+ dev->vendor, dev->device, pirq, irq);
+ if (pirq <= 4)
+ {
+ write_config_nybble(router, 0x56, pirq - 1, irq);
+ }
+ return 1;
+}
+
+#ifdef CONFIG_PCI_BIOS
+
+static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ struct pci_dev *bridge;
+ int pin = pci_get_interrupt_pin(dev, &bridge);
+ return pcibios_set_irq_routing(bridge, pin, irq);
+}
+
+#endif
+
+static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ static struct pci_device_id pirq_440gx[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) },
+ { },
+ };
+
+ /* 440GX has a proprietary PIRQ router -- don't use it */
+ if (pci_dev_present(pirq_440gx))
+ return 0;
+
+ switch(device)
+ {
+ case PCI_DEVICE_ID_INTEL_82371FB_0:
+ case PCI_DEVICE_ID_INTEL_82371SB_0:
+ case PCI_DEVICE_ID_INTEL_82371AB_0:
+ case PCI_DEVICE_ID_INTEL_82371MX:
+ case PCI_DEVICE_ID_INTEL_82443MX_0:
+ case PCI_DEVICE_ID_INTEL_82801AA_0:
+ case PCI_DEVICE_ID_INTEL_82801AB_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_10:
+ case PCI_DEVICE_ID_INTEL_82801CA_0:
+ case PCI_DEVICE_ID_INTEL_82801CA_12:
+ case PCI_DEVICE_ID_INTEL_82801DB_0:
+ case PCI_DEVICE_ID_INTEL_82801E_0:
+ case PCI_DEVICE_ID_INTEL_82801EB_0:
+ case PCI_DEVICE_ID_INTEL_ESB_1:
+ case PCI_DEVICE_ID_INTEL_ICH6_0:
+ case PCI_DEVICE_ID_INTEL_ICH6_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_0:
+ case PCI_DEVICE_ID_INTEL_ICH7_1:
+ r->name = "PIIX/ICH";
+ r->get = pirq_piix_get;
+ r->set = pirq_piix_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ /* FIXME: We should move some of the quirk fixup stuff here */
+ switch(device)
+ {
+ case PCI_DEVICE_ID_VIA_82C586_0:
+ case PCI_DEVICE_ID_VIA_82C596:
+ case PCI_DEVICE_ID_VIA_82C686:
+ case PCI_DEVICE_ID_VIA_8231:
+ /* FIXME: add new ones for 8233/5 */
+ r->name = "VIA";
+ r->get = pirq_via_get;
+ r->set = pirq_via_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_VLSI_82C534:
+ r->name = "VLSI 82C534";
+ r->get = pirq_vlsi_get;
+ r->set = pirq_vlsi_set;
+ return 1;
+ }
+ return 0;
+}
+
+
+static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+ r->name = "ServerWorks";
+ r->get = pirq_serverworks_get;
+ r->set = pirq_serverworks_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ if (device != PCI_DEVICE_ID_SI_503)
+ return 0;
+
+ r->name = "SIS";
+ r->get = pirq_sis_get;
+ r->set = pirq_sis_set;
+ return 1;
+}
+
+static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_CYRIX_5520:
+ r->name = "NatSemi";
+ r->get = pirq_cyrix_get;
+ r->set = pirq_cyrix_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_OPTI_82C700:
+ r->name = "OPTI";
+ r->get = pirq_opti_get;
+ r->set = pirq_opti_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_ITE_IT8330G_0:
+ r->name = "ITE";
+ r->get = pirq_ite_get;
+ r->set = pirq_ite_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_AL_M1533:
+ case PCI_DEVICE_ID_AL_M1563:
+ printk("PCI: Using ALI IRQ Router\n");
+ r->name = "ALI";
+ r->get = pirq_ali_get;
+ r->set = pirq_ali_set;
+ return 1;
+ }
+ return 0;
+}
+
+static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_AMD_VIPER_740B:
+ r->name = "AMD756";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7413:
+ r->name = "AMD766";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7443:
+ r->name = "AMD768";
+ break;
+ default:
+ return 0;
+ }
+ r->get = pirq_amd756_get;
+ r->set = pirq_amd756_set;
+ return 1;
+}
+
+static __initdata struct irq_router_handler pirq_routers[] = {
+ { PCI_VENDOR_ID_INTEL, intel_router_probe },
+ { PCI_VENDOR_ID_AL, ali_router_probe },
+ { PCI_VENDOR_ID_ITE, ite_router_probe },
+ { PCI_VENDOR_ID_VIA, via_router_probe },
+ { PCI_VENDOR_ID_OPTI, opti_router_probe },
+ { PCI_VENDOR_ID_SI, sis_router_probe },
+ { PCI_VENDOR_ID_CYRIX, cyrix_router_probe },
+ { PCI_VENDOR_ID_VLSI, vlsi_router_probe },
+ { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
+ { PCI_VENDOR_ID_AMD, amd_router_probe },
+ /* Someone with docs needs to add the ATI Radeon IGP */
+ { 0, NULL }
+};
+static struct irq_router pirq_router;
+static struct pci_dev *pirq_router_dev;
+
+
+/*
+ * FIXME: should we have an option to say "generic for
+ * chipset" ?
+ */
+
+static void __init pirq_find_router(struct irq_router *r)
+{
+ struct irq_routing_table *rt = pirq_table;
+ struct irq_router_handler *h;
+
+#ifdef CONFIG_PCI_BIOS
+ if (!rt->signature) {
+ printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
+ r->set = pirq_bios_set;
+ r->name = "BIOS";
+ return;
+ }
+#endif
+
+ /* Default unless a driver reloads it */
+ r->name = "default";
+ r->get = NULL;
+ r->set = NULL;
+
+ DBG("PCI: Attempting to find IRQ router for %04x:%04x\n",
+ rt->rtr_vendor, rt->rtr_device);
+
+ pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn);
+ if (!pirq_router_dev) {
+ DBG("PCI: Interrupt router not found at %02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
+ return;
+ }
+
+ for( h = pirq_routers; h->vendor; h++) {
+ /* First look for a router match */
+ if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+ break;
+ /* Fall back to a device match */
+ if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+ break;
+ }
+ printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
+ pirq_router.name,
+ pirq_router_dev->vendor,
+ pirq_router_dev->device,
+ pci_name(pirq_router_dev));
+}
+
+static struct irq_info *pirq_get_info(struct pci_dev *dev)
+{
+ struct irq_routing_table *rt = pirq_table;
+ int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+ struct irq_info *info;
+
+ for (info = rt->slots; entries--; info++)
+ if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+ return info;
+ return NULL;
+}
+
+static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
+{
+ u8 pin;
+ struct irq_info *info;
+ int i, pirq, newirq;
+ int irq = 0;
+ u32 mask;
+ struct irq_router *r = &pirq_router;
+ struct pci_dev *dev2 = NULL;
+ char *msg = NULL;
+
+ /* Find IRQ pin */
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (!pin) {
+ DBG(" -> no interrupt pin\n");
+ return 0;
+ }
+ pin = pin - 1;
+
+ /* Find IRQ routing entry */
+
+ if (!pirq_table)
+ return 0;
+
+ DBG("IRQ for %s[%c]", pci_name(dev), 'A' + pin);
+ info = pirq_get_info(dev);
+ if (!info) {
+ DBG(" -> not found in routing table\n");
+ return 0;
+ }
+ pirq = info->irq[pin].link;
+ mask = info->irq[pin].bitmap;
+ if (!pirq) {
+ DBG(" -> not routed\n");
+ return 0;
+ }
+ DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+ mask &= pcibios_irq_mask;
+
+ /* Work around broken HP Pavilion Notebooks which assign USB to
+ IRQ 9 even though it is actually wired to IRQ 11 */
+
+ if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) {
+ dev->irq = 11;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ r->set(pirq_router_dev, dev, pirq, 11);
+ }
+
+ /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
+ if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+ pirq = 0x68;
+ mask = 0x400;
+ dev->irq = r->get(pirq_router_dev, dev, pirq);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+
+ /*
+ * Find the best IRQ to assign: use the one
+ * reported by the device if possible.
+ */
+ newirq = dev->irq;
+ if (!((1 << newirq) & mask)) {
+ if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
+ else printk(KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n", newirq, pci_name(dev));
+ }
+ if (!newirq && assign) {
+ for (i = 0; i < 16; i++) {
+ if (!(mask & (1 << i)))
+ continue;
+ if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, SA_SHIRQ))
+ newirq = i;
+ }
+ }
+ DBG(" -> newirq=%d", newirq);
+
+ /* Check if it is hardcoded */
+ if ((pirq & 0xf0) == 0xf0) {
+ irq = pirq & 0xf;
+ DBG(" -> hardcoded IRQ %d\n", irq);
+ msg = "Hardcoded";
+ } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+ ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+ DBG(" -> got IRQ %d\n", irq);
+ msg = "Found";
+ } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+ DBG(" -> assigning IRQ %d", newirq);
+ if (r->set(pirq_router_dev, dev, pirq, newirq)) {
+ eisa_set_level_irq(newirq);
+ DBG(" ... OK\n");
+ msg = "Assigned";
+ irq = newirq;
+ }
+ }
+
+ if (!irq) {
+ DBG(" ... failed\n");
+ if (newirq && mask == (1 << newirq)) {
+ msg = "Guessed";
+ irq = newirq;
+ } else
+ return 0;
+ }
+ printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+
+ /* Update IRQ for all devices with the same pirq value */
+ while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
+ pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin);
+ if (!pin)
+ continue;
+ pin--;
+ info = pirq_get_info(dev2);
+ if (!info)
+ continue;
+ if (info->irq[pin].link == pirq) {
+ /* We refuse to override the dev->irq information. Give a warning! */
+ if ( dev2->irq && dev2->irq != irq && \
+ (!(pci_probe & PCI_USE_PIRQ_MASK) || \
+ ((1 << dev2->irq) & mask)) ) {
+#ifndef CONFIG_PCI_MSI
+ printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+ pci_name(dev2), dev2->irq, irq);
+#endif
+ continue;
+ }
+ dev2->irq = irq;
+ pirq_penalty[irq]++;
+ if (dev != dev2)
+ printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+ }
+ }
+ return 1;
+}
+
+static void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 pin;
+
+ DBG("PCI: IRQ fixup\n");
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ /*
+ * If the BIOS has set an out of range IRQ number, just ignore it.
+ * Also keep track of which IRQ's are already in use.
+ */
+ if (dev->irq >= 16) {
+ DBG("%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ dev->irq = 0;
+ }
+ /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
+ if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+ pirq_penalty[dev->irq] = 0;
+ pirq_penalty[dev->irq]++;
+ }
+
+ dev = NULL;
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+#ifdef CONFIG_X86_IO_APIC
+ /*
+ * Recalculate IRQ numbers if we use the I/O APIC.
+ */
+ if (io_apic_assign_pci_irqs)
+ {
+ int irq;
+
+ if (pin) {
+ pin--; /* interrupt pins are numbered starting from 1 */
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ /*
+ * Busses behind bridges are typically not listed in the MP-table.
+ * In this case we have to look up the IRQ based on the parent bus,
+ * parent slot, and pin number. The SMP code detects such bridged
+ * busses itself so we should get into this branch reliably.
+ */
+ if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
+ struct pci_dev * bridge = dev->bus->self;
+
+ pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ PCI_SLOT(bridge->devfn), pin);
+ if (irq >= 0)
+ printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
+ pci_name(bridge), 'A' + pin, irq);
+ }
+ if (irq >= 0) {
+ if (use_pci_vector() &&
+ !platform_legacy_irq(irq))
+ irq = IO_APIC_VECTOR(irq);
+
+ printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+ pci_name(dev), 'A' + pin, irq);
+ dev->irq = irq;
+ }
+ }
+ }
+#endif
+ /*
+ * Still no IRQ? Try to lookup one...
+ */
+ if (pin && !dev->irq)
+ pcibios_lookup_irq(dev, 0);
+ }
+}
+
+/*
+ * Work around broken HP Pavilion Notebooks which assign USB to
+ * IRQ 9 even though it is actually wired to IRQ 11
+ */
+static int __init fix_broken_hp_bios_irq9(struct dmi_system_id *d)
+{
+ if (!broken_hp_bios_irq9) {
+ broken_hp_bios_irq9 = 1;
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ }
+ return 0;
+}
+
+/*
+ * Work around broken Acer TravelMate 360 Notebooks which assign
+ * Cardbus to IRQ 11 even though it is actually wired to IRQ 10
+ */
+static int __init fix_acer_tm360_irqrouting(struct dmi_system_id *d)
+{
+ if (!acer_tm360_irqrouting) {
+ acer_tm360_irqrouting = 1;
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ }
+ return 0;
+}
+
+static struct dmi_system_id __initdata pciirq_dmi_table[] = {
+ {
+ .callback = fix_broken_hp_bios_irq9,
+ .ident = "HP Pavilion N5400 Series Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+ DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
+ },
+ },
+ {
+ .callback = fix_acer_tm360_irqrouting,
+ .ident = "Acer TravelMate 36x Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+ },
+ },
+ { }
+};
+
+static int __init pcibios_irq_init(void)
+{
+ DBG("PCI: IRQ init\n");
+
+ if (pcibios_enable_irq || raw_pci_ops == NULL)
+ return 0;
+
+ dmi_check_system(pciirq_dmi_table);
+
+ pirq_table = pirq_find_routing_table();
+
+#ifdef CONFIG_PCI_BIOS
+ if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN))
+ pirq_table = pcibios_get_irq_routing_table();
+#endif
+ if (pirq_table) {
+ pirq_peer_trick();
+ pirq_find_router(&pirq_router);
+ if (pirq_table->exclusive_irqs) {
+ int i;
+ for (i=0; i<16; i++)
+ if (!(pirq_table->exclusive_irqs & (1 << i)))
+ pirq_penalty[i] += 100;
+ }
+ /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+ if (io_apic_assign_pci_irqs)
+ pirq_table = NULL;
+ }
+
+ pcibios_enable_irq = pirq_enable_irq;
+
+ pcibios_fixup_irqs();
+ return 0;
+}
+
+subsys_initcall(pcibios_irq_init);
+
+
+static void pirq_penalize_isa_irq(int irq)
+{
+ /*
+ * If any ISAPnP device reports an IRQ in its list of possible
+ * IRQ's, we try to avoid assigning it to PCI devices.
+ */
+ if (irq < 16)
+ pirq_penalty[irq] += 100;
+}
+
+void pcibios_penalize_isa_irq(int irq)
+{
+#ifdef CONFIG_ACPI_PCI
+ if (!acpi_noirq)
+ acpi_penalize_isa_irq(irq);
+ else
+#endif
+ pirq_penalize_isa_irq(irq);
+}
+
+static int pirq_enable_irq(struct pci_dev *dev)
+{
+ u8 pin;
+ extern int via_interrupt_line_quirk;
+ struct pci_dev *temp_dev;
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ char *msg = "";
+
+ pin--; /* interrupt pins are numbered starting from 1 */
+
+ if (io_apic_assign_pci_irqs) {
+ int irq;
+
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ /*
+ * Busses behind bridges are typically not listed in the MP-table.
+ * In this case we have to look up the IRQ based on the parent bus,
+ * parent slot, and pin number. The SMP code detects such bridged
+ * busses itself so we should get into this branch reliably.
+ */
+ temp_dev = dev;
+ while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
+ struct pci_dev * bridge = dev->bus->self;
+
+ pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ PCI_SLOT(bridge->devfn), pin);
+ if (irq >= 0)
+ printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
+ pci_name(bridge), 'A' + pin, irq);
+ dev = bridge;
+ }
+ dev = temp_dev;
+ if (irq >= 0) {
+#ifdef CONFIG_PCI_MSI
+ if (!platform_legacy_irq(irq))
+ irq = IO_APIC_VECTOR(irq);
+#endif
+ printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+ pci_name(dev), 'A' + pin, irq);
+ dev->irq = irq;
+ return 0;
+ } else
+ msg = " Probably buggy MP table.";
+ } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
+ msg = "";
+ else
+ msg = " Please try using pci=biosirq.";
+
+ /* With IDE legacy devices the IRQ lookup failure is not a problem.. */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+ return 0;
+
+ printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+ 'A' + pin, pci_name(dev), msg);
+ }
+ /* VIA bridges use interrupt line for apic/pci steering across
+ the V-Link */
+ else if (via_interrupt_line_quirk)
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
+ return 0;
+}
+
+int pci_vector_resources(int last, int nr_released)
+{
+ int count = nr_released;
+
+ int next = last;
+ int offset = (last % 8);
+
+ while (next < FIRST_SYSTEM_VECTOR) {
+ next += 8;
+#ifdef CONFIG_X86_64
+ if (next == IA32_SYSCALL_VECTOR)
+ continue;
+#else
+ if (next == SYSCALL_VECTOR)
+ continue;
+#endif
+ count++;
+ if (next >= FIRST_SYSTEM_VECTOR) {
+ if (offset%8) {
+ next = FIRST_DEVICE_VECTOR + offset;
+ offset++;
+ continue;
+ }
+ count--;
+ }
+ }
+
+ return count;
+}
diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c
new file mode 100644
index 0000000..1492e37
--- /dev/null
+++ b/arch/i386/pci/legacy.c
@@ -0,0 +1,54 @@
+/*
+ * legacy.c - traditional, old school PCI bus probing
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include "pci.h"
+
+/*
+ * Discover remaining PCI buses in case there are peer host bridges.
+ * We use the number of last PCI bus provided by the PCI BIOS.
+ */
+static void __devinit pcibios_fixup_peer_bridges(void)
+{
+ int n, devfn;
+
+ if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+ return;
+ DBG("PCI: Peer bridge fixup\n");
+
+ for (n=0; n <= pcibios_last_bus; n++) {
+ u32 l;
+ if (pci_find_bus(0, n))
+ continue;
+ for (devfn = 0; devfn < 256; devfn += 8) {
+ if (!raw_pci_ops->read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
+ l != 0x0000 && l != 0xffff) {
+ DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
+ printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
+ pci_scan_bus(n, &pci_root_ops, NULL);
+ break;
+ }
+ }
+ }
+}
+
+static int __init pci_legacy_init(void)
+{
+ if (!raw_pci_ops) {
+ printk("PCI: System does not support PCI\n");
+ return 0;
+ }
+
+ if (pcibios_scanned++)
+ return 0;
+
+ printk("PCI: Probing PCI hardware\n");
+ pci_root_bus = pcibios_scan_root(0);
+
+ pcibios_fixup_peer_bridges();
+
+ return 0;
+}
+
+subsys_initcall(pci_legacy_init);
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
new file mode 100644
index 0000000..021a50a
--- /dev/null
+++ b/arch/i386/pci/mmconfig.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2004 Matthew Wilcox <matthew@wil.cx>
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This code is released under the GNU General Public License version 2.
+ */
+
+/*
+ * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include "pci.h"
+
+/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
+u32 pci_mmcfg_base_addr;
+
+#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
+
+/* The base address of the last MMCONFIG device accessed */
+static u32 mmcfg_last_accessed_device;
+
+/*
+ * Functions for accessing PCI configuration space with MMCONFIG accesses
+ */
+
+static inline void pci_exp_set_dev_base(int bus, int devfn)
+{
+ u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12);
+ if (dev_base != mmcfg_last_accessed_device) {
+ mmcfg_last_accessed_device = dev_base;
+ set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
+ }
+}
+
+static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ unsigned long flags;
+
+ if (!value || (bus > 255) || (devfn > 255) || (reg > 4095))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ pci_exp_set_dev_base(bus, devfn);
+
+ switch (len) {
+ case 1:
+ *value = readb(mmcfg_virt_addr + reg);
+ break;
+ case 2:
+ *value = readw(mmcfg_virt_addr + reg);
+ break;
+ case 4:
+ *value = readl(mmcfg_virt_addr + reg);
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ unsigned long flags;
+
+ if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ pci_exp_set_dev_base(bus, devfn);
+
+ switch (len) {
+ case 1:
+ writeb(value, mmcfg_virt_addr + reg);
+ break;
+ case 2:
+ writew(value, mmcfg_virt_addr + reg);
+ break;
+ case 4:
+ writel(value, mmcfg_virt_addr + reg);
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+static struct pci_raw_ops pci_mmcfg = {
+ .read = pci_mmcfg_read,
+ .write = pci_mmcfg_write,
+};
+
+static int __init pci_mmcfg_init(void)
+{
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+ goto out;
+ if (!pci_mmcfg_base_addr)
+ goto out;
+
+ /* Kludge for now. Don't use mmconfig on AMD systems because
+ those have some busses where mmconfig doesn't work,
+ and we don't parse ACPI MCFG well enough to handle that.
+ Remove when proper handling is added. */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+ goto out;
+
+ printk(KERN_INFO "PCI: Using MMCONFIG\n");
+ raw_pci_ops = &pci_mmcfg;
+ pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+
+ out:
+ return 0;
+}
+
+arch_initcall(pci_mmcfg_init);
diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c
new file mode 100644
index 0000000..9e36954
--- /dev/null
+++ b/arch/i386/pci/numa.c
@@ -0,0 +1,130 @@
+/*
+ * numa.c - Low-level PCI access for NUMA-Q machines
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/nodemask.h>
+#include "pci.h"
+
+#define BUS2QUAD(global) (mp_bus_id_to_node[global])
+#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+
+#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
+ (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
+
+static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ unsigned long flags;
+
+ if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus));
+
+ switch (len) {
+ case 1:
+ *value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus));
+ break;
+ case 2:
+ *value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus));
+ break;
+ case 4:
+ *value = inl_quad(0xCFC, BUS2QUAD(bus));
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ unsigned long flags;
+
+ if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus));
+
+ switch (len) {
+ case 1:
+ outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus));
+ break;
+ case 2:
+ outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus));
+ break;
+ case 4:
+ outl_quad((u32)value, 0xCFC, BUS2QUAD(bus));
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return 0;
+}
+
+#undef PCI_CONF1_MQ_ADDRESS
+
+static struct pci_raw_ops pci_direct_conf1_mq = {
+ .read = pci_conf1_mq_read,
+ .write = pci_conf1_mq_write
+};
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+ /*
+ * i450NX -- Find and scan all secondary buses on all PXB's.
+ */
+ int pxb, reg;
+ u8 busno, suba, subb;
+ int quad = BUS2QUAD(d->bus->number);
+
+ printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+ reg = 0xd0;
+ for(pxb=0; pxb<2; pxb++) {
+ pci_read_config_byte(d, reg++, &busno);
+ pci_read_config_byte(d, reg++, &suba);
+ pci_read_config_byte(d, reg++, &subb);
+ DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ if (busno)
+ pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops, NULL); /* Bus A */
+ if (suba < subb)
+ pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops, NULL); /* Bus B */
+ }
+ pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+static int __init pci_numa_init(void)
+{
+ int quad;
+
+ raw_pci_ops = &pci_direct_conf1_mq;
+
+ if (pcibios_scanned++)
+ return 0;
+
+ pci_root_bus = pcibios_scan_root(0);
+ if (num_online_nodes() > 1)
+ for_each_online_node(quad) {
+ if (quad == 0)
+ continue;
+ printk("Scanning PCI bus %d for quad %d\n",
+ QUADLOCAL2BUS(quad,0), quad);
+ pci_scan_bus(QUADLOCAL2BUS(quad,0),
+ &pci_root_ops, NULL);
+ }
+ return 0;
+}
+
+subsys_initcall(pci_numa_init);
diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c
new file mode 100644
index 0000000..141421b
--- /dev/null
+++ b/arch/i386/pci/pcbios.c
@@ -0,0 +1,487 @@
+/*
+ * BIOS32 and PCI BIOS handling.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include "pci.h"
+#include "pci-functions.h"
+
+
+/* BIOS32 signature: "_32_" */
+#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
+
+/* PCI signature: "PCI " */
+#define PCI_SIGNATURE (('P' << 0) + ('C' << 8) + ('I' << 16) + (' ' << 24))
+
+/* PCI service signature: "$PCI" */
+#define PCI_SERVICE (('$' << 0) + ('P' << 8) + ('C' << 16) + ('I' << 24))
+
+/* PCI BIOS hardware mechanism flags */
+#define PCIBIOS_HW_TYPE1 0x01
+#define PCIBIOS_HW_TYPE2 0x02
+#define PCIBIOS_HW_TYPE1_SPEC 0x10
+#define PCIBIOS_HW_TYPE2_SPEC 0x20
+
+/*
+ * This is the standard structure used to identify the entry point
+ * to the BIOS32 Service Directory, as documented in
+ * Standard BIOS 32-bit Service Directory Proposal
+ * Revision 0.4 May 24, 1993
+ * Phoenix Technologies Ltd.
+ * Norwood, MA
+ * and the PCI BIOS specification.
+ */
+
+union bios32 {
+ struct {
+ unsigned long signature; /* _32_ */
+ unsigned long entry; /* 32 bit physical address */
+ unsigned char revision; /* Revision level, 0 */
+ unsigned char length; /* Length in paragraphs should be 01 */
+ unsigned char checksum; /* All bytes must add up to zero */
+ unsigned char reserved[5]; /* Must be zero */
+ } fields;
+ char chars[16];
+};
+
+/*
+ * Physical address of the service directory. I don't know if we're
+ * allowed to have more than one of these or not, so just in case
+ * we'll make pcibios_present() take a memory start parameter and store
+ * the array there.
+ */
+
+static struct {
+ unsigned long address;
+ unsigned short segment;
+} bios32_indirect = { 0, __KERNEL_CS };
+
+/*
+ * Returns the entry point for the given service, NULL on error
+ */
+
+static unsigned long bios32_service(unsigned long service)
+{
+ unsigned char return_code; /* %al */
+ unsigned long address; /* %ebx */
+ unsigned long length; /* %ecx */
+ unsigned long entry; /* %edx */
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __asm__("lcall *(%%edi); cld"
+ : "=a" (return_code),
+ "=b" (address),
+ "=c" (length),
+ "=d" (entry)
+ : "0" (service),
+ "1" (0),
+ "D" (&bios32_indirect));
+ local_irq_restore(flags);
+
+ switch (return_code) {
+ case 0:
+ return address + entry;
+ case 0x80: /* Not present */
+ printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
+ return 0;
+ default: /* Shouldn't happen */
+ printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
+ service, return_code);
+ return 0;
+ }
+}
+
+static struct {
+ unsigned long address;
+ unsigned short segment;
+} pci_indirect = { 0, __KERNEL_CS };
+
+static int pci_bios_present;
+
+static int __devinit check_pcibios(void)
+{
+ u32 signature, eax, ebx, ecx;
+ u8 status, major_ver, minor_ver, hw_mech;
+ unsigned long flags, pcibios_entry;
+
+ if ((pcibios_entry = bios32_service(PCI_SERVICE))) {
+ pci_indirect.address = pcibios_entry + PAGE_OFFSET;
+
+ local_irq_save(flags);
+ __asm__(
+ "lcall *(%%edi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=d" (signature),
+ "=a" (eax),
+ "=b" (ebx),
+ "=c" (ecx)
+ : "1" (PCIBIOS_PCI_BIOS_PRESENT),
+ "D" (&pci_indirect)
+ : "memory");
+ local_irq_restore(flags);
+
+ status = (eax >> 8) & 0xff;
+ hw_mech = eax & 0xff;
+ major_ver = (ebx >> 8) & 0xff;
+ minor_ver = ebx & 0xff;
+ if (pcibios_last_bus < 0)
+ pcibios_last_bus = ecx & 0xff;
+ DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
+ status, hw_mech, major_ver, minor_ver, pcibios_last_bus);
+ if (status || signature != PCI_SIGNATURE) {
+ printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
+ status, signature);
+ return 0;
+ }
+ printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
+ major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
+#ifdef CONFIG_PCI_DIRECT
+ if (!(hw_mech & PCIBIOS_HW_TYPE1))
+ pci_probe &= ~PCI_PROBE_CONF1;
+ if (!(hw_mech & PCIBIOS_HW_TYPE2))
+ pci_probe &= ~PCI_PROBE_CONF2;
+#endif
+ return 1;
+ }
+ return 0;
+}
+
+static int __devinit pci_bios_find_device (unsigned short vendor, unsigned short device_id,
+ unsigned short index, unsigned char *bus, unsigned char *device_fn)
+{
+ unsigned short bx;
+ unsigned short ret;
+
+ __asm__("lcall *(%%edi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=b" (bx),
+ "=a" (ret)
+ : "1" (PCIBIOS_FIND_PCI_DEVICE),
+ "c" (device_id),
+ "d" (vendor),
+ "S" ((int) index),
+ "D" (&pci_indirect));
+ *bus = (bx >> 8) & 0xff;
+ *device_fn = bx & 0xff;
+ return (int) (ret & 0xff00) >> 8;
+}
+
+static int pci_bios_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ unsigned long result = 0;
+ unsigned long flags;
+ unsigned long bx = (bus << 8) | devfn;
+
+ if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ switch (len) {
+ case 1:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=c" (*value),
+ "=a" (result)
+ : "1" (PCIBIOS_READ_CONFIG_BYTE),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ case 2:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=c" (*value),
+ "=a" (result)
+ : "1" (PCIBIOS_READ_CONFIG_WORD),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ case 4:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=c" (*value),
+ "=a" (result)
+ : "1" (PCIBIOS_READ_CONFIG_DWORD),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return (int)((result & 0xff00) >> 8);
+}
+
+static int pci_bios_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ unsigned long result = 0;
+ unsigned long flags;
+ unsigned long bx = (bus << 8) | devfn;
+
+ if ((bus > 255) || (devfn > 255) || (reg > 255))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pci_config_lock, flags);
+
+ switch (len) {
+ case 1:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (result)
+ : "0" (PCIBIOS_WRITE_CONFIG_BYTE),
+ "c" (value),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ case 2:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (result)
+ : "0" (PCIBIOS_WRITE_CONFIG_WORD),
+ "c" (value),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ case 4:
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (result)
+ : "0" (PCIBIOS_WRITE_CONFIG_DWORD),
+ "c" (value),
+ "b" (bx),
+ "D" ((long)reg),
+ "S" (&pci_indirect));
+ break;
+ }
+
+ spin_unlock_irqrestore(&pci_config_lock, flags);
+
+ return (int)((result & 0xff00) >> 8);
+}
+
+
+/*
+ * Function table for BIOS32 access
+ */
+
+static struct pci_raw_ops pci_bios_access = {
+ .read = pci_bios_read,
+ .write = pci_bios_write
+};
+
+/*
+ * Try to find PCI BIOS.
+ */
+
+static struct pci_raw_ops * __devinit pci_find_bios(void)
+{
+ union bios32 *check;
+ unsigned char sum;
+ int i, length;
+
+ /*
+ * Follow the standard procedure for locating the BIOS32 Service
+ * directory by scanning the permissible address range from
+ * 0xe0000 through 0xfffff for a valid BIOS32 structure.
+ */
+
+ for (check = (union bios32 *) __va(0xe0000);
+ check <= (union bios32 *) __va(0xffff0);
+ ++check) {
+ if (check->fields.signature != BIOS32_SIGNATURE)
+ continue;
+ length = check->fields.length * 16;
+ if (!length)
+ continue;
+ sum = 0;
+ for (i = 0; i < length ; ++i)
+ sum += check->chars[i];
+ if (sum != 0)
+ continue;
+ if (check->fields.revision != 0) {
+ printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
+ check->fields.revision, check);
+ continue;
+ }
+ DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check);
+ if (check->fields.entry >= 0x100000) {
+ printk("PCI: BIOS32 entry (0x%p) in high memory, cannot use.\n", check);
+ return NULL;
+ } else {
+ unsigned long bios32_entry = check->fields.entry;
+ DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n", bios32_entry);
+ bios32_indirect.address = bios32_entry + PAGE_OFFSET;
+ if (check_pcibios())
+ return &pci_bios_access;
+ }
+ break; /* Hopefully more than one BIOS32 cannot happen... */
+ }
+
+ return NULL;
+}
+
+/*
+ * Sort the device list according to PCI BIOS. Nasty hack, but since some
+ * fool forgot to define the `correct' device order in the PCI BIOS specs
+ * and we want to be (possibly bug-to-bug ;-]) compatible with older kernels
+ * which used BIOS ordering, we are bound to do this...
+ */
+
+void __devinit pcibios_sort(void)
+{
+ LIST_HEAD(sorted_devices);
+ struct list_head *ln;
+ struct pci_dev *dev, *d;
+ int idx, found;
+ unsigned char bus, devfn;
+
+ DBG("PCI: Sorting device list...\n");
+ while (!list_empty(&pci_devices)) {
+ ln = pci_devices.next;
+ dev = pci_dev_g(ln);
+ idx = found = 0;
+ while (pci_bios_find_device(dev->vendor, dev->device, idx, &bus, &devfn) == PCIBIOS_SUCCESSFUL) {
+ idx++;
+ list_for_each(ln, &pci_devices) {
+ d = pci_dev_g(ln);
+ if (d->bus->number == bus && d->devfn == devfn) {
+ list_del(&d->global_list);
+ list_add_tail(&d->global_list, &sorted_devices);
+ if (d == dev)
+ found = 1;
+ break;
+ }
+ }
+ if (ln == &pci_devices) {
+ printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn);
+ /*
+ * We must not continue scanning as several buggy BIOSes
+ * return garbage after the last device. Grr.
+ */
+ break;
+ }
+ }
+ if (!found) {
+ printk(KERN_WARNING "PCI: Device %s not found by BIOS\n",
+ pci_name(dev));
+ list_del(&dev->global_list);
+ list_add_tail(&dev->global_list, &sorted_devices);
+ }
+ }
+ list_splice(&sorted_devices, &pci_devices);
+}
+
+/*
+ * BIOS Functions for IRQ Routing
+ */
+
+struct irq_routing_options {
+ u16 size;
+ struct irq_info *table;
+ u16 segment;
+} __attribute__((packed));
+
+struct irq_routing_table * __devinit pcibios_get_irq_routing_table(void)
+{
+ struct irq_routing_options opt;
+ struct irq_routing_table *rt = NULL;
+ int ret, map;
+ unsigned long page;
+
+ if (!pci_bios_present)
+ return NULL;
+ page = __get_free_page(GFP_KERNEL);
+ if (!page)
+ return NULL;
+ opt.table = (struct irq_info *) page;
+ opt.size = PAGE_SIZE;
+ opt.segment = __KERNEL_DS;
+
+ DBG("PCI: Fetching IRQ routing table... ");
+ __asm__("push %%es\n\t"
+ "push %%ds\n\t"
+ "pop %%es\n\t"
+ "lcall *(%%esi); cld\n\t"
+ "pop %%es\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (ret),
+ "=b" (map),
+ "=m" (opt)
+ : "0" (PCIBIOS_GET_ROUTING_OPTIONS),
+ "1" (0),
+ "D" ((long) &opt),
+ "S" (&pci_indirect),
+ "m" (opt)
+ : "memory");
+ DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
+ if (ret & 0xff00)
+ printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+ else if (opt.size) {
+ rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
+ if (rt) {
+ memset(rt, 0, sizeof(struct irq_routing_table));
+ rt->size = opt.size + sizeof(struct irq_routing_table);
+ rt->exclusive_irqs = map;
+ memcpy(rt->slots, (void *) page, opt.size);
+ printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
+ }
+ }
+ free_page(page);
+ return rt;
+}
+
+
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
+{
+ int ret;
+
+ __asm__("lcall *(%%esi); cld\n\t"
+ "jc 1f\n\t"
+ "xor %%ah, %%ah\n"
+ "1:"
+ : "=a" (ret)
+ : "0" (PCIBIOS_SET_PCI_HW_INT),
+ "b" ((dev->bus->number << 8) | dev->devfn),
+ "c" ((irq << 8) | (pin + 10)),
+ "S" (&pci_indirect));
+ return !(ret & 0xff00);
+}
+
+static int __init pci_pcbios_init(void)
+{
+ if ((pci_probe & PCI_PROBE_BIOS)
+ && ((raw_pci_ops = pci_find_bios()))) {
+ pci_probe |= PCI_BIOS_SORT;
+ pci_bios_present = 1;
+ }
+ return 0;
+}
+
+arch_initcall(pci_pcbios_init);
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
new file mode 100644
index 0000000..a8fc80c
--- /dev/null
+++ b/arch/i386/pci/pci.h
@@ -0,0 +1,74 @@
+/*
+ * Low-Level PCI Access for i386 machines.
+ *
+ * (c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 0x0001
+#define PCI_PROBE_CONF1 0x0002
+#define PCI_PROBE_CONF2 0x0004
+#define PCI_PROBE_MMCONF 0x0008
+#define PCI_PROBE_MASK 0x000f
+
+#define PCI_NO_SORT 0x0100
+#define PCI_BIOS_SORT 0x0200
+#define PCI_NO_CHECKS 0x0400
+#define PCI_USE_PIRQ_MASK 0x0800
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+#define PCI_ASSIGN_ALL_BUSSES 0x4000
+
+extern unsigned int pci_probe;
+
+/* pci-i386.c */
+
+extern unsigned int pcibios_max_latency;
+
+void pcibios_resource_survey(void);
+int pcibios_enable_resources(struct pci_dev *, int);
+
+/* pci-pc.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops pci_root_ops;
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern int pcibios_scanned;
+extern spinlock_t pci_config_lock;
+
+extern int (*pcibios_enable_irq)(struct pci_dev *dev);
diff --git a/arch/i386/pci/visws.c b/arch/i386/pci/visws.c
new file mode 100644
index 0000000..6a92487
--- /dev/null
+++ b/arch/i386/pci/visws.c
@@ -0,0 +1,110 @@
+/*
+ * Low-Level PCI Support for SGI Visual Workstation
+ *
+ * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include "cobalt.h"
+#include "lithium.h"
+
+#include "pci.h"
+
+
+extern struct pci_raw_ops pci_direct_conf1;
+
+static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
+
+int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
+
+void __init pcibios_penalize_isa_irq(int irq) {}
+
+
+unsigned int pci_bus0, pci_bus1;
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ u8 pin = *pinp;
+
+ while (dev->bus->self) { /* Move up the chain of bridges. */
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ dev = dev->bus->self;
+ }
+ *pinp = pin;
+
+ return PCI_SLOT(dev->devfn);
+}
+
+static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq, bus = dev->bus->number;
+
+ pin--;
+
+ /* Nothing useful at PIIX4 pin 1 */
+ if (bus == pci_bus0 && slot == 4 && pin == 0)
+ return -1;
+
+ /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
+ if (bus == pci_bus0 && slot == 4 && pin == 3) {
+ irq = CO_IRQ(CO_APIC_PIIX4_USB);
+ goto out;
+ }
+
+ /* First pin spread down 1 APIC entry per slot */
+ if (pin == 0) {
+ irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
+ CO_APIC_PCIA_BASE0) + slot);
+ goto out;
+ }
+
+ /* lines 1,2,3 from any slot is shared in this twirly pattern */
+ if (bus == pci_bus1) {
+ /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
+ irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
+ } else { /* bus == pci_bus0 */
+ /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
+ if (slot == 0)
+ slot = 3; /* same pattern */
+ irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
+ }
+out:
+ printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
+ return irq;
+}
+
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+static int __init pcibios_init(void)
+{
+ /* The VISWS supports configuration access type 1 only */
+ pci_probe = (pci_probe | PCI_PROBE_CONF1) &
+ ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
+
+ pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
+ pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
+
+ printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
+ "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
+
+ raw_pci_ops = &pci_direct_conf1;
+ pci_scan_bus(pci_bus0, &pci_root_ops, NULL);
+ pci_scan_bus(pci_bus1, &pci_root_ops, NULL);
+ pci_fixup_irqs(visws_swizzle, visws_map_irq);
+ pcibios_resource_survey();
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
diff --git a/arch/i386/power/Makefile b/arch/i386/power/Makefile
new file mode 100644
index 0000000..8cfa4e8
--- /dev/null
+++ b/arch/i386/power/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PM) += cpu.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
new file mode 100644
index 0000000..cf337c6
--- /dev/null
+++ b/arch/i386/power/cpu.c
@@ -0,0 +1,152 @@
+/*
+ * Suspend support specific for i386.
+ *
+ * Distribute under GPLv2
+ *
+ * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/sysrq.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
+#include <asm/uaccess.h>
+#include <asm/acpi.h>
+#include <asm/tlbflush.h>
+
+static struct saved_context saved_context;
+
+unsigned long saved_context_ebx;
+unsigned long saved_context_esp, saved_context_ebp;
+unsigned long saved_context_esi, saved_context_edi;
+unsigned long saved_context_eflags;
+
+extern void enable_sep_cpu(void *);
+
+void __save_processor_state(struct saved_context *ctxt)
+{
+ kernel_fpu_begin();
+
+ /*
+ * descriptor tables
+ */
+ asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit));
+ asm volatile ("sidt %0" : "=m" (ctxt->idt_limit));
+ asm volatile ("sldt %0" : "=m" (ctxt->ldt));
+ asm volatile ("str %0" : "=m" (ctxt->tr));
+
+ /*
+ * segment registers
+ */
+ asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
+ asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
+ asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
+ asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
+
+ /*
+ * control registers
+ */
+ asm volatile ("movl %%cr0, %0" : "=r" (ctxt->cr0));
+ asm volatile ("movl %%cr2, %0" : "=r" (ctxt->cr2));
+ asm volatile ("movl %%cr3, %0" : "=r" (ctxt->cr3));
+ asm volatile ("movl %%cr4, %0" : "=r" (ctxt->cr4));
+}
+
+void save_processor_state(void)
+{
+ __save_processor_state(&saved_context);
+}
+
+static void
+do_fpu_end(void)
+{
+ /* restore FPU regs if necessary */
+ /* Do it out of line so that gcc does not move cr0 load to some stupid place */
+ kernel_fpu_end();
+ mxcsr_feature_mask_init();
+}
+
+
+static void fix_processor_context(void)
+{
+ int cpu = smp_processor_id();
+ struct tss_struct * t = &per_cpu(init_tss, cpu);
+
+ set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
+ per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS].b &= 0xfffffdff;
+
+ load_TR_desc(); /* This does ltr */
+ load_LDT(¤t->active_mm->context); /* This does lldt */
+
+ /*
+ * Now maybe reload the debug registers
+ */
+ if (current->thread.debugreg[7]){
+ loaddebug(¤t->thread, 0);
+ loaddebug(¤t->thread, 1);
+ loaddebug(¤t->thread, 2);
+ loaddebug(¤t->thread, 3);
+ /* no 4 and 5 */
+ loaddebug(¤t->thread, 6);
+ loaddebug(¤t->thread, 7);
+ }
+
+}
+
+void __restore_processor_state(struct saved_context *ctxt)
+{
+
+ /*
+ * control registers
+ */
+ asm volatile ("movl %0, %%cr4" :: "r" (ctxt->cr4));
+ asm volatile ("movl %0, %%cr3" :: "r" (ctxt->cr3));
+ asm volatile ("movl %0, %%cr2" :: "r" (ctxt->cr2));
+ asm volatile ("movl %0, %%cr0" :: "r" (ctxt->cr0));
+
+ /*
+ * segment registers
+ */
+ asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
+ asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
+ asm volatile ("movw %0, %%gs" :: "r" (ctxt->gs));
+ asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
+
+ /*
+ * now restore the descriptor tables to their proper values
+ * ltr is done i fix_processor_context().
+ */
+ asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit));
+ asm volatile ("lidt %0" :: "m" (ctxt->idt_limit));
+ asm volatile ("lldt %0" :: "m" (ctxt->ldt));
+
+ /*
+ * sysenter MSRs
+ */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ enable_sep_cpu(NULL);
+
+ fix_processor_context();
+ do_fpu_end();
+}
+
+void restore_processor_state(void)
+{
+ __restore_processor_state(&saved_context);
+}
+
+/* Needed by apm.c */
+EXPORT_SYMBOL(save_processor_state);
+EXPORT_SYMBOL(restore_processor_state);
diff --git a/arch/i386/power/swsusp.S b/arch/i386/power/swsusp.S
new file mode 100644
index 0000000..c410528
--- /dev/null
+++ b/arch/i386/power/swsusp.S
@@ -0,0 +1,73 @@
+.text
+
+/* Originally gcc generated, modified by hand
+ *
+ * This may not use any stack, nor any variable that is not "NoSave":
+ *
+ * Its rewriting one kernel image with another. What is stack in "old"
+ * image could very well be data page in "new" image, and overwriting
+ * your own stack under you is bad idea.
+ */
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/asm_offsets.h>
+
+ .text
+
+ENTRY(swsusp_arch_suspend)
+
+ movl %esp, saved_context_esp
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl ; popl saved_context_eflags
+
+ call swsusp_save
+ ret
+
+ENTRY(swsusp_arch_resume)
+ movl $swsusp_pg_dir-__PAGE_OFFSET, %ecx
+ movl %ecx, %cr3
+
+ movl pagedir_nosave, %edx
+ .p2align 4,,7
+
+copy_loop:
+ testl %edx, %edx
+ jz done
+
+ movl pbe_address(%edx), %esi
+ movl pbe_orig_address(%edx), %edi
+
+ movl $1024, %ecx
+ rep
+ movsl
+
+ movl pbe_next(%edx), %edx
+ jmp copy_loop
+ .p2align 4,,7
+
+done:
+ /* Flush TLB, including "global" things (vmalloc) */
+ movl mmu_cr4_features, %eax
+ movl %eax, %edx
+ andl $~(1<<7), %edx; # PGE
+ movl %edx, %cr4; # turn off PGE
+ movl %cr3, %ecx; # flush TLB
+ movl %ecx, %cr3
+ movl %eax, %cr4; # turn PGE back on
+
+ movl saved_context_esp, %esp
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+
+ pushl saved_context_eflags ; popfl
+
+ xorl %eax, %eax
+
+ ret