Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
new file mode 100644
index 0000000..62bdd19
--- /dev/null
+++ b/arch/mips/pci/ops-sni.c
@@ -0,0 +1,89 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SNI specific PCI support for RM200/RM300.
+ *
+ * Copyright (C) 1997 - 2000, 2003 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <asm/sni.h>
+
+/*
+ * It seems that on the RM200 only lower 3 bits of the 5 bit PCI device
+ * address are decoded. We therefore manually have to reject attempts at
+ * reading outside this range. Being on the paranoid side we only do this
+ * test for bus 0 and hope forwarding and decoding work properly for any
+ * subordinated busses.
+ *
+ * ASIC PCI only supports type 1 config cycles.
+ */
+static int set_config_address(unsigned int busno, unsigned int devfn, int reg)
+{
+ if ((devfn > 255) || (reg > 255))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (busno == 0 && devfn >= PCI_DEVFN(8, 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ *(volatile u32 *)PCIMT_CONFIG_ADDRESS =
+ ((busno & 0xff) << 16) |
+ ((devfn & 0xff) << 8) |
+ (reg & 0xfc);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 * val)
+{
+ int res;
+
+ if ((res = set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ *val = *(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3));
+ break;
+ case 2:
+ *val = *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2));
+ break;
+ case 4:
+ *val = *(volatile u32 *) PCIMT_CONFIG_DATA;
+ break;
+ }
+
+ return 0;
+}
+
+static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 val)
+{
+ int res;
+
+ if ((res = set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ *(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3)) = val;
+ break;
+ case 2:
+ *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2)) = val;
+ break;
+ case 4:
+ *(volatile u32 *) PCIMT_CONFIG_DATA = val;
+ break;
+ }
+
+ return 0;
+}
+
+struct pci_ops sni_pci_ops = {
+ .read = pcimt_read,
+ .write = pcimt_write,
+};