Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c
new file mode 100644
index 0000000..1d84d36
--- /dev/null
+++ b/arch/mips/pci/pci-ocelot-c.c
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/mv64340.h>
+
+#include <linux/init.h>
+
+/*
+ * We assume the address ranges have already been setup appropriately by
+ * the firmware. PMON in case of the Ocelot C does that.
+ */
+static struct resource mv_pci_io_mem0_resource = {
+ .name = "MV64340 PCI0 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem0_resource = {
+ .name = "MV64340 PCI0 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus0_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem0_resource,
+ .io_resource = &mv_pci_io_mem0_resource,
+ },
+ .config_addr = MV64340_PCI_0_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static uint32_t mv_io_base, mv_io_size;
+
+static void mv64340_pci0_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
+
+ mv_pci_io_mem0_resource.start = 0;
+ mv_pci_io_mem0_resource.end = io_size - 1;
+ mv_pci_mem0_resource.start = mem0_base;
+ mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
+ mv_bus0_controller.pcic.mem_offset = mem0_base;
+ mv_bus0_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_size - 1;
+
+ register_pci_controller(&mv_bus0_controller.pcic);
+
+ mv_io_base = io_base;
+ mv_io_size = io_size;
+}
+
+static struct resource mv_pci_io_mem1_resource = {
+ .name = "MV64340 PCI1 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem1_resource = {
+ .name = "MV64340 PCI1 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus1_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem1_resource,
+ .io_resource = &mv_pci_io_mem1_resource,
+ },
+ .config_addr = MV64340_PCI_1_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static __init void mv64340_pci1_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
+
+ /*
+ * Here we assume the I/O window of second bus to be contiguous with
+ * the first. A gap is no problem but would waste address space for
+ * remapping the port space.
+ */
+ mv_pci_io_mem1_resource.start = mv_io_size;
+ mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
+ mv_pci_mem1_resource.start = mem0_base;
+ mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
+ mv_bus1_controller.pcic.mem_offset = mem0_base;
+ mv_bus1_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_base + io_size -mv_io_base - 1;
+
+ register_pci_controller(&mv_bus1_controller.pcic);
+
+ mv_io_size = io_base + io_size - mv_io_base;
+}
+
+static __init int __init ocelot_c_pci_init(void)
+{
+ unsigned long io_v_base;
+ uint32_t enable;
+
+ enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
+
+ /*
+ * We require at least one enabled I/O or PCI memory window or we
+ * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
+ */
+ if (enable & (0x01 << 9) || enable & (0x01 << 10))
+ mv64340_pci0_init();
+
+ if (enable & (0x01 << 14) || enable & (0x01 << 15))
+ mv64340_pci1_init();
+
+ if (mv_io_size) {
+ io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
+ if (!io_v_base)
+ panic("Could not ioremap I/O port range");
+
+ set_io_port_base(io_v_base);
+ }
+
+ return 0;
+}
+
+arch_initcall(ocelot_c_pci_init);