Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
new file mode 100644
index 0000000..a0612a8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -0,0 +1,247 @@
+config 4xx
+ bool
+ depends on 40x || 44x
+ default y
+
+menu "IBM 4xx options"
+ depends on 4xx
+
+choice
+ prompt "Machine Type"
+ depends on 40x
+ default WALNUT
+
+config ASH
+ bool "Ash"
+ help
+ This option enables support for the IBM NP405H evaluation board.
+
+config BUBINGA
+ bool "Bubinga"
+ help
+ This option enables support for the IBM 405EP evaluation board.
+
+config CPCI405
+ bool "CPCI405"
+ help
+ This option enables support for the CPCI405 board.
+
+config EP405
+ bool "EP405/EP405PC"
+ help
+ This option enables support for the EP405/EP405PC boards.
+
+config OAK
+ bool "Oak"
+ help
+ This option enables support for the IBM 403GCX evaluation board.
+
+config REDWOOD_5
+ bool "Redwood-5"
+ help
+ This option enables support for the IBM STB04 evaluation board.
+
+config REDWOOD_6
+ bool "Redwood-6"
+ help
+ This option enables support for the IBM STBx25xx evaluation board.
+
+config SYCAMORE
+ bool "Sycamore"
+ help
+ This option enables support for the IBM PPC405GPr evaluation board.
+
+config WALNUT
+ bool "Walnut"
+ help
+ This option enables support for the IBM PPC405GP evaluation board.
+
+config XILINX_ML300
+ bool "Xilinx-ML300"
+ help
+ This option enables support for the Xilinx ML300 evaluation board.
+
+endchoice
+
+choice
+ prompt "Machine Type"
+ depends on 44x
+ default EBONY
+
+config EBONY
+ bool "Ebony"
+ help
+ This option enables support for the IBM PPC440GP evaluation board.
+
+config LUAN
+ bool "Luan"
+ help
+ This option enables support for the IBM PPC440SP evaluation board.
+
+config OCOTEA
+ bool "Ocotea"
+ help
+ This option enables support for the IBM PPC440GX evaluation board.
+
+endchoice
+
+config EP405PC
+ bool "EP405PC Support"
+ depends on EP405
+
+
+# It's often necessary to know the specific 4xx processor type.
+# Fortunately, it is impled (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config NP405H
+ bool
+ depends on ASH
+ default y
+
+config 440GP
+ bool
+ depends on EBONY
+ default y
+
+config 440GX
+ bool
+ depends on OCOTEA
+ default y
+
+config 440SP
+ bool
+ depends on LUAN
+ default y
+
+config 440
+ bool
+ depends on 440GP || 440SP
+ default y
+
+config 440A
+ bool
+ depends on 440GX
+ default y
+
+# All 405-based cores up until the 405GPR and 405EP have this errata.
+config IBM405_ERR77
+ bool
+ depends on 40x && !403GCX && !405GPR
+ default y
+
+# All 40x-based cores, up until the 405GPR and 405EP have this errata.
+config IBM405_ERR51
+ bool
+ depends on 40x && !405GPR
+ default y
+
+config BOOKE
+ bool
+ depends on 44x
+ default y
+
+config IBM_OCP
+ bool
+ depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ default y
+
+config XILINX_OCP
+ bool
+ depends on XILINX_ML300
+ default y
+
+config IBM_EMAC4
+ bool
+ depends on 440GX || 440SP
+ default y
+
+config BIOS_FIXUP
+ bool
+ depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+ default y
+
+config 403GCX
+ bool
+ depends OAK
+ default y
+
+config 405EP
+ bool
+ depends on BUBINGA
+ default y
+
+config 405GP
+ bool
+ depends on CPCI405 || EP405 || WALNUT
+ default y
+
+config 405GPR
+ bool
+ depends on SYCAMORE
+ default y
+
+config VIRTEX_II_PRO
+ bool
+ depends on XILINX_ML300
+ default y
+
+config STB03xxx
+ bool
+ depends on REDWOOD_5 || REDWOOD_6
+ default y
+
+config EMBEDDEDBOOT
+ bool
+ depends on EP405 || XILINX_ML300
+ default y
+
+config IBM_OPENBIOS
+ bool
+ depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ default y
+
+config PPC4xx_DMA
+ bool "PPC4xx DMA controller support"
+ depends on 4xx
+
+config PPC4xx_EDMA
+ bool
+ depends on !STB03xxx && PPC4xx_DMA
+ default y
+
+config PPC_GEN550
+ bool
+ depends on 4xx
+ default y
+
+config PM
+ bool "Power Management support (EXPERIMENTAL)"
+ depends on 4xx && EXPERIMENTAL
+
+choice
+ prompt "TTYS0 device and default console"
+ depends on 40x
+ default UART0_TTYS0
+
+config UART0_TTYS0
+ bool "UART0"
+
+config UART0_TTYS1
+ bool "UART1"
+
+endchoice
+
+config SERIAL_SICC
+ bool "SICC Serial port support"
+ depends on STB03xxx
+
+config UART1_DFLT_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+
+config SERIAL_SICC_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+endmenu
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
new file mode 100644
index 0000000..ea470c6
--- /dev/null
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -0,0 +1,27 @@
+#
+# Makefile for the PowerPC 4xx linux kernel.
+
+obj-$(CONFIG_ASH) += ash.o
+obj-$(CONFIG_CPCI405) += cpci405.o
+obj-$(CONFIG_EBONY) += ebony.o
+obj-$(CONFIG_EP405) += ep405.o
+obj-$(CONFIG_BUBINGA) += bubinga.o
+obj-$(CONFIG_LUAN) += luan.o
+obj-$(CONFIG_OAK) += oak.o
+obj-$(CONFIG_OCOTEA) += ocotea.o
+obj-$(CONFIG_REDWOOD_5) += redwood5.o
+obj-$(CONFIG_REDWOOD_6) += redwood6.o
+obj-$(CONFIG_SYCAMORE) += sycamore.o
+obj-$(CONFIG_WALNUT) += walnut.o
+obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
+
+obj-$(CONFIG_405GP) += ibm405gp.o
+obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
+obj-$(CONFIG_NP405H) += ibmnp405h.o
+obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o
+obj-$(CONFIG_440GP) += ibm440gp.o
+obj-$(CONFIG_440GX) += ibm440gx.o
+obj-$(CONFIG_440SP) += ibm440sp.o
+obj-$(CONFIG_405EP) += ibm405ep.o
+obj-$(CONFIG_405GPR) += ibm405gpr.o
+obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o
diff --git a/arch/ppc/platforms/4xx/ash.c b/arch/ppc/platforms/4xx/ash.c
new file mode 100644
index 0000000..ce29117
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ash.c
@@ -0,0 +1,250 @@
+/*
+ * arch/ppc/platforms/4xx/ash.c
+ *
+ * Support for the IBM NP405H ash eval board
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/io.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+#include <asm/todc.h>
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+void *ash_rtc_base;
+
+/* Some IRQs unique to Walnut.
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */
+ {25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */
+ {26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */
+ {27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+void __init
+ash_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 3);
+
+#ifdef CONFIG_DEBUG_BRINGUP
+ int i;
+ printk("\n");
+ printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
+ printk("\n");
+ printk("bi_s_version\t %s\n", bip->bi_s_version);
+ printk("bi_r_version\t %s\n", bip->bi_r_version);
+ printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
+ bip->bi_memsize / (1024 * 1000));
+ for (i = 0; i < EMAC_NUMS; i++) {
+ printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i,
+ bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1],
+ bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3],
+ bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]);
+ }
+ printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
+ bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1],
+ bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3],
+ bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]);
+
+ printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
+ bip->bi_intfreq, bip->bi_intfreq / 1000000);
+
+ printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
+ bip->bi_busfreq, bip->bi_busfreq / 1000000);
+ printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
+ bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
+
+ printk("\n");
+#endif
+ /* RTC step for ash */
+ ash_rtc_base = (void *) ASH_RTC_VADDR;
+ TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base,
+ 8);
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ * The following code is simplified by assuming that the bootrom
+ * has been well behaved in following this mapping.
+ */
+
+#ifdef DEBUG
+ int i;
+
+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+ printk("PCI bridge regs before fixup \n");
+ for (i = 0; i <= 2; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dpcila\t0x%x\n", i,
+ in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dpciha\t0x%x\n", i,
+ in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+
+#endif
+ if (ppc_md.progress)
+ ppc_md.progress("bios_fixup(): enter", 0x800);
+
+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
+
+ /* Disable region first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Disable region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+
+ /* Disable region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+
+ /* Enable PTM1 and PTM2, mapped to PLB address 0. */
+
+ out_le32((void *) &(pcip->ptm1la), 0x00000000);
+ out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+ out_le32((void *) &(pcip->ptm2la), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000001);
+
+ /* Write zero to PTM1 BAR. */
+
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno),
+ PCI_BASE_ADDRESS_1,
+ 0x00000000);
+
+ /* Disable PTM2 (unused) */
+
+ out_le32((void *) &(pcip->ptm2la), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+
+ /* end work arround */
+ if (ppc_md.progress)
+ ppc_md.progress("bios_fixup(): done", 0x800);
+
+#ifdef DEBUG
+ printk("PCI bridge regs after fixup \n");
+ for (i = 0; i <= 2; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dpcila\t0x%x\n", i,
+ in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dpciha\t0x%x\n", i,
+ in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+
+
+#endif
+}
+
+void __init
+ash_map_io(void)
+{
+ ppc4xx_map_io();
+ io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = ash_setup_arch;
+ ppc_md.setup_io_mappings = ash_map_io;
+
+#ifdef CONFIG_PPC_RTC
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/ash.h b/arch/ppc/platforms/4xx/ash.h
new file mode 100644
index 0000000..5f7448e
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ash.h
@@ -0,0 +1,83 @@
+/*
+ * arch/ppc/platforms/4xx/ash.h
+ *
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * Ash eval board.
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_ASH_H__
+#define __ASM_ASH_H__
+#include <platforms/4xx/ibmnp405h.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Data structure defining board information maintained by the boot
+ * ROM on IBM's "Ash" evaluation board. An effort has been made to
+ * keep the field names consistent with the 8xx 'bd_t' board info
+ * structures.
+ */
+
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */
+ unsigned char bi_pci_enetaddr[6];
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI speed in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+/* Memory map for the IBM "Ash" NP405H evaluation board.
+ */
+
+extern void *ash_rtc_base;
+#define ASH_RTC_PADDR ((uint)0xf0000000)
+#define ASH_RTC_VADDR ASH_RTC_PADDR
+#define ASH_RTC_SIZE ((uint)8*1024)
+
+
+/* Early initialization address mapping for block_io.
+ * Standard 405GP map.
+ */
+#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
+#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
+#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
+#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
+#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
+#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
+#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
+#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
+#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
+#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
+#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
+#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
+
+#define NR_BOARD_IRQS 32
+
+#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
+#define BASE_BAUD 201600
+#else
+#define BASE_BAUD 691200
+#endif
+
+#define PPC4xx_MACHINE_NAME "IBM NP405H Ash"
+
+extern char pci_irq_table[][4];
+
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_ASH_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
new file mode 100644
index 0000000..3678abf
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -0,0 +1,263 @@
+/*
+ * Support for IBM PPC 405EP evaluation board (Bubinga).
+ *
+ * Author: SAW (IBM), derived from walnut.c.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/rtc.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/todc.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern bd_t __res;
+
+void *bubinga_rtc_base;
+
+/* Some IRQs unique to the board
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
+ {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
+ {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
+ {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+};
+
+/* The serial clock for the chip is an internal clock determined by
+ * different clock speeds/dividers.
+ * Calculate the proper input baud rate and setup the serial driver.
+ */
+static void __init
+bubinga_early_serial_map(void)
+{
+ u32 uart_div;
+ int uart_clock;
+ struct uart_port port;
+
+ /* Calculate the serial clock input frequency
+ *
+ * The base baud is the PLL OUTA (provided in the board info
+ * structure) divided by the external UART Divisor, divided
+ * by 16.
+ */
+ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
+ uart_clock = __res.bi_pllouta_freq / uart_div;
+
+ /* Setup serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = (void*)ACTING_UART0_IO_BASE;
+ port.irq = ACTING_UART0_INT;
+ port.uartclk = uart_clock;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+ port.membase = (void*)ACTING_UART1_IO_BASE;
+ port.irq = ACTING_UART1_INT;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+
+ unsigned int bar_response, bar;
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ * The following code is simplified by assuming that the bootrom
+ * has been well behaved in following this mapping.
+ */
+
+#ifdef DEBUG
+ int i;
+
+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+ printk("PCI bridge regs before fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
+
+ /* Disable region first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Disable region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+
+ /* Disable region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+ out_le32((void *) &(pcip->ptm2la), 0x00000000);
+
+ /* Zero config bars */
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ 0x00000000);
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+ /* end work arround */
+
+#ifdef DEBUG
+ printk("PCI bridge regs after fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+}
+
+void __init
+bubinga_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 1);
+
+ bubinga_early_serial_map();
+
+ /* RTC step for the evb405ep */
+ bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
+ TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
+ bubinga_rtc_base, 8);
+ /* Identify the system */
+ printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
+}
+
+void __init
+bubinga_map_io(void)
+{
+ ppc4xx_map_io();
+ io_block_mapping(BUBINGA_RTC_VADDR,
+ BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = bubinga_setup_arch;
+ ppc_md.setup_io_mappings = bubinga_map_io;
+
+#ifdef CONFIG_GEN_RTC
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#endif
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = bubinga_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
new file mode 100644
index 0000000..b1df856
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bubinga.h
@@ -0,0 +1,69 @@
+/*
+ * Support for IBM PPC 405EP evaluation board (Bubinga).
+ *
+ * Author: SAW (IBM), derived from walnut.h.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __BUBINGA_H__
+#define __BUBINGA_H__
+
+/* 405EP */
+#include <platforms/4xx/ibm405ep.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Data structure defining board information maintained by the boot
+ * ROM on IBM's evaluation board. An effort has been made to
+ * keep the field names consistent with the 8xx 'bd_t' board info
+ * structures.
+ */
+
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
+ unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+
+/* Memory map for the Bubinga board.
+ * Generic 4xx plus RTC.
+ */
+
+extern void *bubinga_rtc_base;
+#define BUBINGA_RTC_PADDR ((uint)0xf0000000)
+#define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR
+#define BUBINGA_RTC_SIZE ((uint)8*1024)
+
+/* The UART clock is based off an internal clock -
+ * define BASE_BAUD based on the internal clock and divider(s).
+ * Since BASE_BAUD must be a constant, we will initialize it
+ * using clock/divider values which OpenBIOS initializes
+ * for typical configurations at various CPU speeds.
+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
+ */
+#define BASE_BAUD 0
+
+#define BUBINGA_FPGA_BASE 0xF0300000
+
+#define PPC4xx_MACHINE_NAME "IBM Bubinga"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __BUBINGA_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c
new file mode 100644
index 0000000..ff96677
--- /dev/null
+++ b/arch/ppc/platforms/4xx/cpci405.c
@@ -0,0 +1,84 @@
+/*
+ * arch/ppc/platforms/cpci405.c
+ *
+ * Board setup routines for the esd CPCI-405 cPCI Board.
+ *
+ * Author: Stefan Roese
+ * stefan.roese@esd-electronics.com
+ *
+ * Copyright 2001 esd electronic system design - hannover germany
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/todc.h>
+#include <asm/ocp.h>
+
+void *cpci405_nvram;
+
+/*
+ * Some IRQs unique to CPCI-405.
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {28, 28, 28, 28}, /* IDSEL 15 - cPCI slot 8 */
+ {29, 29, 29, 29}, /* IDSEL 16 - cPCI slot 7 */
+ {30, 30, 30, 30}, /* IDSEL 17 - cPCI slot 6 */
+ {27, 27, 27, 27}, /* IDSEL 18 - cPCI slot 5 */
+ {28, 28, 28, 28}, /* IDSEL 19 - cPCI slot 4 */
+ {29, 29, 29, 29}, /* IDSEL 20 - cPCI slot 3 */
+ {30, 30, 30, 30}, /* IDSEL 21 - cPCI slot 2 */
+ };
+ const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+};
+
+void __init
+cpci405_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 0);
+
+ TODC_INIT(TODC_TYPE_MK48T35, cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
+}
+
+void __init
+cpci405_map_io(void)
+{
+ ppc4xx_map_io();
+ cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = cpci405_setup_arch;
+ ppc_md.setup_io_mappings = cpci405_map_io;
+
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+}
diff --git a/arch/ppc/platforms/4xx/cpci405.h b/arch/ppc/platforms/4xx/cpci405.h
new file mode 100644
index 0000000..e27f7cb
--- /dev/null
+++ b/arch/ppc/platforms/4xx/cpci405.h
@@ -0,0 +1,37 @@
+/*
+ * CPCI-405 board specific definitions
+ *
+ * Copyright (c) 2001 Stefan Roese (stefan.roese@esd-electronics.com)
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_CPCI405_H__
+#define __ASM_CPCI405_H__
+
+#include <linux/config.h>
+
+/* We have a 405GP core */
+#include <platforms/4xx/ibm405gp.h>
+
+#include <asm/ppcboot.h>
+
+#ifndef __ASSEMBLY__
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+/* Map for the NVRAM space */
+#define CPCI405_NVRAM_PADDR ((uint)0xf0200000)
+#define CPCI405_NVRAM_SIZE ((uint)32*1024)
+
+#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
+#define BASE_BAUD 201600
+#else
+#define BASE_BAUD 691200
+#endif
+
+#define PPC4xx_MACHINE_NAME "esd CPCI-405"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_CPCI405_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
new file mode 100644
index 0000000..f63bca8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -0,0 +1,356 @@
+/*
+ * arch/ppc/platforms/4xx/ebony.c
+ *
+ * Ebony board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gp_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+/*
+ * Ebony external IRQ triggering/polarity settings
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ1: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ4: IRDA */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ5: SMI pushbutton */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ6: PHYs */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ7: AUX */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ10: EXT */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ11: EXT */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ12: EXT */
+};
+
+static void __init
+ebony_calibrate_decr(void)
+{
+ unsigned int freq;
+
+ /*
+ * Determine system clock speed
+ *
+ * If we are on Rev. B silicon, then use
+ * default external system clock. If we are
+ * on Rev. C silicon then errata forces us to
+ * use the internal clock.
+ */
+ switch (PVR_REV(mfspr(SPRN_PVR))) {
+ case PVR_REV(PVR_440GP_RB):
+ freq = EBONY_440GP_RB_SYSCLK;
+ break;
+ case PVR_REV(PVR_440GP_RC1):
+ default:
+ freq = EBONY_440GP_RC_SYSCLK;
+ break;
+ }
+
+ ibm44x_calibrate_decr(freq);
+}
+
+static int
+ebony_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: Ebony\n");
+
+ return 0;
+}
+
+static inline int
+ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 23, 23, 23, 23 }, /* IDSEL 1 - PCI Slot 0 */
+ { 24, 24, 24, 24 }, /* IDSEL 2 - PCI Slot 1 */
+ { 25, 25, 25, 25 }, /* IDSEL 3 - PCI Slot 2 */
+ { 26, 26, 26, 26 }, /* IDSEL 4 - PCI Slot 3 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+#define PCIX_WRITEL(value, offset) \
+ (writel(value, pcix_reg_base + offset))
+
+/*
+ * FIXME: This is only here to "make it work". This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+ebony_setup_pcix(void)
+{
+ void *pcix_reg_base;
+
+ pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+ /* Disable all windows */
+ PCIX_WRITEL(0, PCIX0_POM0SA);
+ PCIX_WRITEL(0, PCIX0_POM1SA);
+ PCIX_WRITEL(0, PCIX0_POM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SA);
+ PCIX_WRITEL(0, PCIX0_PIM1SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SA);
+
+ /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+ PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+ PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+ PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+ /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+ PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
+
+ eieio();
+}
+
+static void __init
+ebony_setup_hose(void)
+{
+ struct pci_controller *hose;
+
+ /* Configure windows on the PCI-X host bridge */
+ ebony_setup_pcix();
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;
+
+ pci_init_resource(&hose->io_resource,
+ EBONY_PCI_LOWER_IO,
+ EBONY_PCI_UPPER_IO,
+ IORESOURCE_IO,
+ "PCI host bridge");
+
+ pci_init_resource(&hose->mem_resources[0],
+ EBONY_PCI_LOWER_MEM,
+ EBONY_PCI_UPPER_MEM,
+ IORESOURCE_MEM,
+ "PCI host bridge");
+
+ hose->io_space.start = EBONY_PCI_LOWER_IO;
+ hose->io_space.end = EBONY_PCI_UPPER_IO;
+ hose->mem_space.start = EBONY_PCI_LOWER_MEM;
+ hose->mem_space.end = EBONY_PCI_UPPER_MEM;
+ isa_io_base =
+ (unsigned long)ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
+ hose->io_base_virt = (void *)isa_io_base;
+
+ setup_indirect_pci(hose,
+ EBONY_PCI_CFGA_PLB32,
+ EBONY_PCI_CFGD_PLB32);
+ hose->set_cfg_type = 1;
+
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = ebony_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+ebony_early_serial_map(void)
+{
+ struct uart_port port;
+
+ /* Setup ioremapped serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
+ port.irq = 0;
+ port.uartclk = clocks.uart0;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(0, &port);
+#endif
+
+ port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
+ port.irq = 1;
+ port.uartclk = clocks.uart1;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(1, &port);
+#endif
+}
+
+static void __init
+ebony_setup_arch(void)
+{
+ struct ocp_def *def;
+ struct ocp_func_emac_data *emacdata;
+
+ /* Set mac_addr for each EMAC */
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+ emacdata = def->additions;
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_RMII;
+ memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
+ emacdata = def->additions;
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_RMII;
+ memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+
+ /*
+ * Determine various clocks.
+ * To be completely correct we should get SysClk
+ * from FPGA, because it can be changed by on-board switches
+ * --ebs
+ */
+ ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
+ ocp_sys_info.opb_bus_freq = clocks.opb;
+
+ /* Setup TODC access */
+ TODC_INIT(TODC_TYPE_DS1743,
+ 0,
+ 0,
+ ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
+ 8);
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ /* Setup PCI host bridge */
+ ebony_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ ebony_early_serial_map();
+
+ /* Identify the system */
+ printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+ unsigned long r5, unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3)
+ __res = *(bd_t *)(r3 + KERNELBASE);
+
+ ibm44x_platform_init();
+
+ ppc_md.setup_arch = ebony_setup_arch;
+ ppc_md.show_cpuinfo = ebony_show_cpuinfo;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+
+ ppc_md.calibrate_decr = ebony_calibrate_decr;
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = ebony_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
new file mode 100644
index 0000000..47c391c
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ebony.h
@@ -0,0 +1,91 @@
+/*
+ * arch/ppc/platforms/ebony.h
+ *
+ * Ebony board definitions
+ *
+ * Matt Porter <mporter@mvista.com>
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_EBONY_H__
+#define __ASM_EBONY_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm440gp.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0 0xE0000800
+
+/* Where to find the MAC info */
+#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
+#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
+
+/* Default clock rates for Rev. B and Rev. C silicon */
+#define EBONY_440GP_RB_SYSCLK 33000000
+#define EBONY_440GP_RC_SYSCLK 400000000
+
+/* RTC/NVRAM location */
+#define EBONY_RTC_ADDR 0x0000000148000000ULL
+#define EBONY_RTC_SIZE 0x2000
+
+/* Flash */
+#define EBONY_FPGA_ADDR 0x0000000148300000ULL
+#define EBONY_BOOT_SMALL_FLASH(x) (x & 0x20)
+#define EBONY_ONBRD_FLASH_EN(x) (x & 0x02)
+#define EBONY_FLASH_SEL(x) (x & 0x01)
+#define EBONY_SMALL_FLASH_LOW1 0x00000001ff800000ULL
+#define EBONY_SMALL_FLASH_LOW2 0x00000001ff880000ULL
+#define EBONY_SMALL_FLASH_HIGH1 0x00000001fff00000ULL
+#define EBONY_SMALL_FLASH_HIGH2 0x00000001fff80000ULL
+#define EBONY_SMALL_FLASH_SIZE 0x80000
+#define EBONY_LARGE_FLASH_LOW 0x00000001ff800000ULL
+#define EBONY_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
+#define EBONY_LARGE_FLASH_SIZE 0x400000
+
+#define EBONY_SMALL_FLASH_BASE 0x00000001fff80000ULL
+#define EBONY_LARGE_FLASH_BASE 0x00000001ff800000ULL
+
+/*
+ * Serial port defines
+ */
+
+/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
+
+/* external Epson SG-615P */
+#define BASE_BAUD 691200
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+
+/* PCI support */
+#define EBONY_PCI_LOWER_IO 0x00000000
+#define EBONY_PCI_UPPER_IO 0x0000ffff
+#define EBONY_PCI_LOWER_MEM 0x80002000
+#define EBONY_PCI_UPPER_MEM 0xffffefff
+
+#define EBONY_PCI_CFGREGS_BASE 0x000000020ec00000
+#define EBONY_PCI_CFGA_PLB32 0x0ec00000
+#define EBONY_PCI_CFGD_PLB32 0x0ec00004
+
+#define EBONY_PCI_IO_BASE 0x0000000208000000ULL
+#define EBONY_PCI_IO_SIZE 0x00010000
+#define EBONY_PCI_MEM_OFFSET 0x00000000
+
+#endif /* __ASM_EBONY_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c
new file mode 100644
index 0000000..26a07cd
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ep405.c
@@ -0,0 +1,197 @@
+/*
+ * arch/ppc/platforms/4xx/ep405.c
+ *
+ * Embedded Planet 405GP board
+ * http://www.embeddedplanet.com
+ *
+ * Author: Matthew Locke <mlocke@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/todc.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+u8 *ep405_bcsr;
+u8 *ep405_nvram;
+
+static struct {
+ u8 cpld_xirq_select;
+ int pci_idsel;
+ int irq;
+} ep405_devtable[] = {
+#ifdef CONFIG_EP405PC
+ {0x07, 0x0E, 25}, /* EP405PC: USB */
+#endif
+};
+
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ int i;
+
+ /* AFAICT this is only called a few times during PCI setup, so
+ performance is not critical */
+ for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
+ if (idsel == ep405_devtable[i].pci_idsel)
+ return ep405_devtable[i].irq;
+ }
+ return -1;
+};
+
+void __init
+ep405_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 0);
+
+ if (__res.bi_nvramsize == 512*1024) {
+ /* FIXME: we should properly handle NVRTCs of different sizes */
+ TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8);
+ }
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+ unsigned int bar_response, bar;
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ */
+
+ /* Disable region zero first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Disable region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm1ms), 0x00000000);
+
+ /* Disable region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+
+ /* Configure PTM (PCI->PLB) region 1 */
+ out_le32((void *) &(pcip->ptm1la), 0x00000000); /* PLB base address */
+ /* Disable PTM region 2 */
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+
+ /* Zero config bars */
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ 0x00000000);
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+ /* end work arround */
+}
+
+void __init
+ep405_map_io(void)
+{
+ bd_t *bip = &__res;
+
+ ppc4xx_map_io();
+
+ ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE);
+
+ if (bip->bi_nvramsize > 0) {
+ ep405_nvram = ioremap(EP405_NVRAM_PADDR, bip->bi_nvramsize);
+ }
+}
+
+void __init
+ep405_init_IRQ(void)
+{
+ int i;
+
+ ppc4xx_init_IRQ();
+
+ /* Workaround for a bug in the firmware it incorrectly sets
+ the IRQ polarities for XIRQ0 and XIRQ1 */
+ mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */
+ mtdcr(DCRN_UIC_SR(DCRN_UIC0_BASE), 0x00000060); /* clear bogus interrupts */
+
+ /* Activate the XIRQs from the CPLD */
+ writeb(0xf0, ep405_bcsr+10);
+
+ /* Set up IRQ routing */
+ for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
+ if ( (ep405_devtable[i].irq >= 25)
+ && (ep405_devtable[i].irq) <= 31) {
+ writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5);
+ writeb(ep405_devtable[i].irq - 25, ep405_bcsr+6);
+ }
+ }
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = ep405_setup_arch;
+ ppc_md.setup_io_mappings = ep405_map_io;
+ ppc_md.init_IRQ = ep405_init_IRQ;
+
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+
+ if (__res.bi_nvramsize == 512*1024) {
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ } else {
+ printk("EP405: NVRTC size is not 512k (not a DS1557). Not sure what to do with it\n");
+ }
+}
diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h
new file mode 100644
index 0000000..ea3eb21
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ep405.h
@@ -0,0 +1,54 @@
+/*
+ * arch/ppc/platforms/4xx/ep405.h
+ *
+ * Embedded Planet 405GP board
+ * http://www.embeddedplanet.com
+ *
+ * Author: Matthew Locke <mlocke@mvista.com>
+ *
+ * 2000 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_EP405_H__
+#define __ASM_EP405_H__
+
+/* We have a 405GP core */
+#include <platforms/4xx/ibm405gp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct board_info {
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned int bi_nvramsize; /* Size of the NVRAM/RTC */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+extern u8 *ep405_bcsr;
+extern u8 *ep405_nvram;
+
+/* Map for the BCSR and NVRAM space */
+#define EP405_BCSR_PADDR ((uint)0xf4000000)
+#define EP405_BCSR_SIZE ((uint)16)
+#define EP405_NVRAM_PADDR ((uint)0xf4200000)
+
+/* serial defines */
+#define BASE_BAUD 399193
+
+#define PPC4xx_MACHINE_NAME "Embedded Planet 405GP"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_EP405_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c
new file mode 100644
index 0000000..6d44567
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405ep.c
@@ -0,0 +1,143 @@
+/*
+ * arch/ppc/platforms/ibm405ep.c
+ *
+ * Support for IBM PPC 405EP processors.
+ *
+ * Author: SAW (IBM), derived from ibmnp405l.c.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+
+#include <asm/ibm4xx.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+static struct ocp_func_mal_data ibm405ep_mal0_def = {
+ .num_tx_chans = 4, /* Number of TX channels */
+ .num_rx_chans = 2, /* Number of RX channels */
+ .txeob_irq = 11, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 12, /* RX End Of Buffer IRQ */
+ .txde_irq = 13, /* TX Descriptor Error IRQ */
+ .rxde_irq = 14, /* RX Descriptor Error IRQ */
+ .serr_irq = 10, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_emac_data ibm405ep_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = -1, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 9, /* WOL interrupt number */
+ .mdio_idx = 0, /* MDIO via EMAC0 */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm405ep_emac1_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = -1, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 1, /* MAL rx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
+ .wol_irq = 9, /* WOL interrupt number */
+ .mdio_idx = 0, /* MDIO via EMAC0 */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_iic_data ibm405ep_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0xEF600000,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = 0xEF600500,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm405ep_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = 0xEF600700,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm405ep_mal0_def,
+ .show = &ocp_show_mal_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = EMAC0_BASE,
+ .irq = 15,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm405ep_emac0_def,
+ .show = &ocp_show_emac_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 1,
+ .paddr = 0xEF600900,
+ .irq = 17,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm405ep_emac1_def,
+ .show = &ocp_show_emac_data
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xffff7f80,
+ .triggering = 0x00000000,
+ .ext_irq_mask = 0x0000007f, /* IRQ0 - IRQ6 */
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h
new file mode 100644
index 0000000..e051e3f
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405ep.h
@@ -0,0 +1,148 @@
+/*
+ * arch/ppc/platforms/4xx/ibm405ep.h
+ *
+ * IBM PPC 405EP processor defines.
+ *
+ * Author: SAW (IBM), derived from ibm405gp.h.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM405EP_H__
+#define __ASM_IBM405EP_H__
+
+#include <linux/config.h>
+
+/* ibm405.h at bottom of this file */
+
+/* PCI
+ * PCI Bridge config reg definitions
+ * see 17-19 of manual
+ */
+
+#define PPC405_PCI_CONFIG_ADDR 0xeec00000
+#define PPC405_PCI_CONFIG_DATA 0xeec00004
+
+#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
+ /* setbat */
+#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
+#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
+#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
+
+#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */
+#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
+#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
+#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
+
+#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
+
+#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
+#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
+#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
+#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
+#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
+#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
+#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
+#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
+#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
+#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
+#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
+#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
+
+/* serial port defines */
+#define RS_TABLE_SIZE 2
+
+#define UART0_INT 0
+#define UART1_INT 1
+
+#define PCIL0_BASE 0xEF400000
+#define UART0_IO_BASE 0xEF600300
+#define UART1_IO_BASE 0xEF600400
+#define EMAC0_BASE 0xEF600800
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
+
+#if defined(CONFIG_UART0_TTYS0)
+#define ACTING_UART0_IO_BASE UART0_IO_BASE
+#define ACTING_UART1_IO_BASE UART1_IO_BASE
+#define ACTING_UART0_INT UART0_INT
+#define ACTING_UART1_INT UART1_INT
+#else
+#define ACTING_UART0_IO_BASE UART1_IO_BASE
+#define ACTING_UART1_IO_BASE UART0_IO_BASE
+#define ACTING_UART0_INT UART1_INT
+#define ACTING_UART1_INT UART0_INT
+#endif
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, ACTING_UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (u8 *)ACTING_UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_DEBUG_IO_BASE ACTING_UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+
+/* DCR defines */
+#define DCRN_CPMSR_BASE 0x0BA
+#define DCRN_CPMFR_BASE 0x0B9
+
+#define DCRN_CPC0_PLLMR0_BASE 0x0F0
+#define DCRN_CPC0_BOOT_BASE 0x0F1
+#define DCRN_CPC0_CR1_BASE 0x0F2
+#define DCRN_CPC0_EPRCSR_BASE 0x0F3
+#define DCRN_CPC0_PLLMR1_BASE 0x0F4
+#define DCRN_CPC0_UCR_BASE 0x0F5
+#define DCRN_CPC0_UCR_U0DIV 0x07F
+#define DCRN_CPC0_SRR_BASE 0x0F6
+#define DCRN_CPC0_JTAGID_BASE 0x0F7
+#define DCRN_CPC0_SPARE_BASE 0x0F8
+#define DCRN_CPC0_PCI_BASE 0x0F9
+
+
+#define IBM_CPM_GPT 0x80000000 /* GPT interface */
+#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
+#define IBM_CPM_UIC 0x00010000 /* Universal Int Controller */
+#define IBM_CPM_CPU 0x00008000 /* processor core */
+#define IBM_CPM_EBC 0x00002000 /* EBC controller */
+#define IBM_CPM_SDRAM0 0x00004000 /* SDRAM memory controller */
+#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO */
+#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
+#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
+#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
+#define IBM_CPM_DMA 0x00000040 /* DMA controller */
+#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
+#define IBM_CPM_UART1 0x00000002 /* serial port 0 */
+#define IBM_CPM_UART0 0x00000001 /* serial port 1 */
+#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
+ | IBM_CPM_OPB | IBM_CPM_EBC \
+ | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
+ | IBM_CPM_UIC | IBM_CPM_TMRCLK)
+#define DCRN_DMA0_BASE 0x100
+#define DCRN_DMA1_BASE 0x108
+#define DCRN_DMA2_BASE 0x110
+#define DCRN_DMA3_BASE 0x118
+#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
+#define DCRN_DMASR_BASE 0x120
+#define DCRN_EBC_BASE 0x012
+#define DCRN_DCP0_BASE 0x014
+#define DCRN_MAL_BASE 0x180
+#define DCRN_OCM0_BASE 0x018
+#define DCRN_PLB0_BASE 0x084
+#define DCRN_PLLMR_BASE 0x0B0
+#define DCRN_POB0_BASE 0x0A0
+#define DCRN_SDRAM0_BASE 0x010
+#define DCRN_UIC0_BASE 0x0C0
+#define UIC0 DCRN_UIC0_BASE
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBM405EP_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c
new file mode 100644
index 0000000..dfd7ef3
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405gp.c
@@ -0,0 +1,120 @@
+/*
+ *
+ * Copyright 2000-2001 MontaVista Software Inc.
+ * Original author: Armin Kuster akuster@mvista.com
+ *
+ * Module name: ibm405gp.c
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <platforms/4xx/ibm405gp.h>
+#include <asm/ibm4xx.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm405gp_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = -1, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 9, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm405gp_mal0_def = {
+ .num_tx_chans = 1, /* Number of TX channels */
+ .num_rx_chans = 1, /* Number of RX channels */
+ .txeob_irq = 11, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 12, /* RX End Of Buffer IRQ */
+ .txde_irq = 13, /* TX Descriptor Error IRQ */
+ .rxde_irq = 14, /* RX Descriptor Error IRQ */
+ .serr_irq = 10, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm405gp_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0xEF600000,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = 0xEF600500,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm405gp_iic0_def,
+ .show = &ocp_show_iic_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = 0xEF600700,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm405gp_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = EMAC0_BASE,
+ .irq = 15,
+ .pm = IBM_CPM_EMAC0,
+ .additions = &ibm405gp_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xffffff80,
+ .triggering = 0x10000000,
+ .ext_irq_mask = 0x0000007f, /* IRQ0 - IRQ6 */
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h
new file mode 100644
index 0000000..b2b642e
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405gp.h
@@ -0,0 +1,151 @@
+/*
+ * arch/ppc/platforms/4xx/ibm405gp.h
+ *
+ * Author: Armin Kuster akuster@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM405GP_H__
+#define __ASM_IBM405GP_H__
+
+#include <linux/config.h>
+
+/* ibm405.h at bottom of this file */
+
+/* PCI
+ * PCI Bridge config reg definitions
+ * see 17-19 of manual
+ */
+
+#define PPC405_PCI_CONFIG_ADDR 0xeec00000
+#define PPC405_PCI_CONFIG_DATA 0xeec00004
+
+#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
+ /* setbat */
+#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
+#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
+#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
+
+#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */
+#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
+#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
+#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
+
+#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
+
+#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
+#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
+#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
+#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
+#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
+#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
+#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
+#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
+#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
+#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
+#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
+#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
+
+/* serial port defines */
+#define RS_TABLE_SIZE 2
+
+#define UART0_INT 0
+#define UART1_INT 1
+
+#define PCIL0_BASE 0xEF400000
+#define UART0_IO_BASE 0xEF600300
+#define UART1_IO_BASE 0xEF600400
+#define EMAC0_BASE 0xEF600800
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (u8 *)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(1) \
+ STD_UART_OP(0)
+#endif
+
+/* DCR defines */
+#define DCRN_CHCR_BASE 0x0B1
+#define DCRN_CHPSR_BASE 0x0B4
+#define DCRN_CPMSR_BASE 0x0B8
+#define DCRN_CPMFR_BASE 0x0BA
+
+#define CHR0_U0EC 0x00000080 /* Select external clock for UART0 */
+#define CHR0_U1EC 0x00000040 /* Select external clock for UART1 */
+#define CHR0_UDIV 0x0000003E /* UART internal clock divisor */
+#define CHR1_CETE 0x00800000 /* CPU external timer enable */
+
+#define DCRN_CHPSR_BASE 0x0B4
+#define PSR_PLL_FWD_MASK 0xC0000000
+#define PSR_PLL_FDBACK_MASK 0x30000000
+#define PSR_PLL_TUNING_MASK 0x0E000000
+#define PSR_PLB_CPU_MASK 0x01800000
+#define PSR_OPB_PLB_MASK 0x00600000
+#define PSR_PCI_PLB_MASK 0x00180000
+#define PSR_EB_PLB_MASK 0x00060000
+#define PSR_ROM_WIDTH_MASK 0x00018000
+#define PSR_ROM_LOC 0x00004000
+#define PSR_PCI_ASYNC_EN 0x00001000
+#define PSR_PCI_ARBIT_EN 0x00000400
+
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
+#define IBM_CPM_CPU 0x20000000 /* processor core */
+#define IBM_CPM_DMA 0x10000000 /* DMA controller */
+#define IBM_CPM_OPB 0x08000000 /* PLB to OPB bridge */
+#define IBM_CPM_DCP 0x04000000 /* CodePack */
+#define IBM_CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
+#define IBM_CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
+#define IBM_CPM_PLB 0x00800000 /* PLB bus arbiter */
+#define IBM_CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
+#define IBM_CPM_UART0 0x00200000 /* serial port 0 */
+#define IBM_CPM_UART1 0x00100000 /* serial port 1 */
+#define IBM_CPM_UIC 0x00080000 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00040000 /* CPU timers */
+#define IBM_CPM_EMAC0 0x00020000 /* on-chip ethernet MM unit */
+#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
+ | IBM_CPM_OPB | IBM_CPM_EBC \
+ | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
+ | IBM_CPM_UIC | IBM_CPM_TMRCLK)
+
+#define DCRN_DMA0_BASE 0x100
+#define DCRN_DMA1_BASE 0x108
+#define DCRN_DMA2_BASE 0x110
+#define DCRN_DMA3_BASE 0x118
+#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
+#define DCRN_DMASR_BASE 0x120
+#define DCRN_EBC_BASE 0x012
+#define DCRN_DCP0_BASE 0x014
+#define DCRN_MAL_BASE 0x180
+#define DCRN_OCM0_BASE 0x018
+#define DCRN_PLB0_BASE 0x084
+#define DCRN_PLLMR_BASE 0x0B0
+#define DCRN_POB0_BASE 0x0A0
+#define DCRN_SDRAM0_BASE 0x010
+#define DCRN_UIC0_BASE 0x0C0
+#define UIC0 DCRN_UIC0_BASE
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBM405GP_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c
new file mode 100644
index 0000000..01c8ccb
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405gpr.c
@@ -0,0 +1,117 @@
+/*
+ * arch/ppc/platforms/4xx/ibm405gpr.c
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <platforms/4xx/ibm405gpr.h>
+#include <asm/ibm4xx.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm405gpr_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = -1, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 9, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm405gpr_mal0_def = {
+ .num_tx_chans = 1, /* Number of TX channels */
+ .num_rx_chans = 1, /* Number of RX channels */
+ .txeob_irq = 11, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 12, /* RX End Of Buffer IRQ */
+ .txde_irq = 13, /* TX Descriptor Error IRQ */
+ .rxde_irq = 14, /* RX Descriptor Error IRQ */
+ .serr_irq = 10, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm405gpr_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0xEF600000,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = 0xEF600500,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm405gpr_iic0_def,
+ .show = &ocp_show_iic_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = 0xEF600700,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm405gpr_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = EMAC0_BASE,
+ .irq = 15,
+ .pm = IBM_CPM_EMAC0,
+ .additions = &ibm405gpr_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xffffe000,
+ .triggering = 0x10000000,
+ .ext_irq_mask = 0x00001fff, /* IRQ7 - IRQ12, IRQ0 - IRQ6 */
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h
new file mode 100644
index 0000000..45412fb
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm405gpr.h
@@ -0,0 +1,151 @@
+/*
+ * arch/ppc/platforms/4xx/ibm405gpr.h
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM405GPR_H__
+#define __ASM_IBM405GPR_H__
+
+#include <linux/config.h>
+
+/* ibm405.h at bottom of this file */
+
+/* PCI
+ * PCI Bridge config reg definitions
+ * see 17-19 of manual
+ */
+
+#define PPC405_PCI_CONFIG_ADDR 0xeec00000
+#define PPC405_PCI_CONFIG_DATA 0xeec00004
+
+#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
+ /* setbat */
+#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
+#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
+#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
+
+#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */
+#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
+#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
+#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
+
+#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
+
+#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
+#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
+#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
+#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
+#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
+#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
+#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
+#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
+#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
+#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
+#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
+#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
+
+/* serial port defines */
+#define RS_TABLE_SIZE 2
+
+#define UART0_INT 0
+#define UART1_INT 1
+
+#define PCIL0_BASE 0xEF400000
+#define UART0_IO_BASE 0xEF600300
+#define UART1_IO_BASE 0xEF600400
+#define EMAC0_BASE 0xEF600800
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (u8 *)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(1) \
+ STD_UART_OP(0)
+#endif
+
+/* DCR defines */
+#define DCRN_CHCR_BASE 0x0B1
+#define DCRN_CHPSR_BASE 0x0B4
+#define DCRN_CPMSR_BASE 0x0B8
+#define DCRN_CPMFR_BASE 0x0BA
+
+#define CHR0_U0EC 0x00000080 /* Select external clock for UART0 */
+#define CHR0_U1EC 0x00000040 /* Select external clock for UART1 */
+#define CHR0_UDIV 0x0000003E /* UART internal clock divisor */
+#define CHR1_CETE 0x00800000 /* CPU external timer enable */
+
+#define DCRN_CHPSR_BASE 0x0B4
+#define PSR_PLL_FWD_MASK 0xC0000000
+#define PSR_PLL_FDBACK_MASK 0x30000000
+#define PSR_PLL_TUNING_MASK 0x0E000000
+#define PSR_PLB_CPU_MASK 0x01800000
+#define PSR_OPB_PLB_MASK 0x00600000
+#define PSR_PCI_PLB_MASK 0x00180000
+#define PSR_EB_PLB_MASK 0x00060000
+#define PSR_ROM_WIDTH_MASK 0x00018000
+#define PSR_ROM_LOC 0x00004000
+#define PSR_PCI_ASYNC_EN 0x00001000
+#define PSR_PCI_ARBIT_EN 0x00000400
+
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
+#define IBM_CPM_CPU 0x20000000 /* processor core */
+#define IBM_CPM_DMA 0x10000000 /* DMA controller */
+#define IBM_CPM_OPB 0x08000000 /* PLB to OPB bridge */
+#define IBM_CPM_DCP 0x04000000 /* CodePack */
+#define IBM_CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
+#define IBM_CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
+#define IBM_CPM_PLB 0x00800000 /* PLB bus arbiter */
+#define IBM_CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
+#define IBM_CPM_UART0 0x00200000 /* serial port 0 */
+#define IBM_CPM_UART1 0x00100000 /* serial port 1 */
+#define IBM_CPM_UIC 0x00080000 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00040000 /* CPU timers */
+#define IBM_CPM_EMAC0 0x00020000 /* on-chip ethernet MM unit */
+#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
+ | IBM_CPM_OPB | IBM_CPM_EBC \
+ | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
+ | IBM_CPM_UIC | IBM_CPM_TMRCLK)
+
+#define DCRN_DMA0_BASE 0x100
+#define DCRN_DMA1_BASE 0x108
+#define DCRN_DMA2_BASE 0x110
+#define DCRN_DMA3_BASE 0x118
+#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
+#define DCRN_DMASR_BASE 0x120
+#define DCRN_EBC_BASE 0x012
+#define DCRN_DCP0_BASE 0x014
+#define DCRN_MAL_BASE 0x180
+#define DCRN_OCM0_BASE 0x018
+#define DCRN_PLB0_BASE 0x084
+#define DCRN_PLLMR_BASE 0x0B0
+#define DCRN_POB0_BASE 0x0A0
+#define DCRN_SDRAM0_BASE 0x010
+#define DCRN_UIC0_BASE 0x0C0
+#define UIC0 DCRN_UIC0_BASE
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBM405GPR_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c
new file mode 100644
index 0000000..27615ef
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440gp.c
@@ -0,0 +1,164 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440gp.c
+ *
+ * PPC440GP I/O descriptions
+ *
+ * Matt Porter <mporter@mvista.com>
+ * Copyright 2002-2004 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440gp.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm440gp_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 61, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440gp_emac1_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 1, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 1, /* MAL rx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
+ .wol_irq = 63, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440gp_mal0_def = {
+ .num_tx_chans = 4, /* Number of TX channels */
+ .num_rx_chans = 2, /* Number of RX channels */
+ .txeob_irq = 10, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 11, /* RX End Of Buffer IRQ */
+ .txde_irq = 33, /* TX Descriptor Error IRQ */
+ .rxde_irq = 34, /* RX Descriptor Error IRQ */
+ .serr_irq = 32, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440gp_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440gp_iic1_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0x0000000140000000ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = PPC440GP_UART0_ADDR,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = PPC440GP_UART1_ADDR,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 0,
+ .paddr = 0x0000000140000400ULL,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm440gp_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 1,
+ .paddr = 0x0000000140000500ULL,
+ .irq = 3,
+ .pm = IBM_CPM_IIC1,
+ .additions = &ibm440gp_iic1_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .index = 0,
+ .paddr = 0x0000000140000700ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gp_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = 0x0000000140000800ULL,
+ .irq = 60,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gp_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 1,
+ .paddr = 0x0000000140000900ULL,
+ .irq = 62,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gp_emac1_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_ZMII,
+ .paddr = 0x0000000140000780ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xfffffe03,
+ .triggering = 0x01c00000,
+ .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */
+ },
+ { .polarity = 0xffffc0ff,
+ .triggering = 0x00ff8000,
+ .ext_irq_mask = 0x00003f00, /* IRQ7 - IRQ12 */
+ },
+};
diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h
new file mode 100644
index 0000000..ae1efc0
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440gp.h
@@ -0,0 +1,66 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440gp.h
+ *
+ * PPC440GP definitions
+ *
+ * Roland Dreier <roland@digitalvampire.org>
+ *
+ * Copyright 2002 Roland Dreier
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file contains code that was originally in the files ibm44x.h
+ * and ebony.h, which were written by Matt Porter of MontaVista Software Inc.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440GP_H
+#define __PPC_PLATFORMS_IBM440GP_H
+
+#include <linux/config.h>
+
+/* UART */
+#define PPC440GP_UART0_ADDR 0x0000000140000200ULL
+#define PPC440GP_UART1_ADDR 0x0000000140000300ULL
+#define UART0_INT 0
+#define UART1_INT 1
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
+#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
+#define IBM_CPM_CPU 0x02000000 /* processor core */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
+#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
+#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
+#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
+#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
+#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
+#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
+#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
+#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
+#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
+#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
+#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+ | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+ | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+ | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI)
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 2
+
+#include <asm/ibm44x.h>
+#include <syslib/ibm440gp_common.h>
+
+#endif /* __PPC_PLATFORMS_IBM440GP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c
new file mode 100644
index 0000000..1f38f42
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440gx.c
@@ -0,0 +1,234 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440gx.c
+ *
+ * PPC440GX I/O descriptions
+ *
+ * Matt Porter <mporter@mvista.com>
+ * Copyright 2002-2004 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440gx.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm440gx_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 61, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440gx_emac1_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 1, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 1, /* MAL rx channel number */
+ .mal_tx_chan = 1, /* MAL tx channel number */
+ .wol_irq = 63, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440gx_emac2_def = {
+ .rgmii_idx = 0, /* RGMII device index */
+ .rgmii_mux = 0, /* RGMII input of this EMAC */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 2, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 2, /* MAL rx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
+ .wol_irq = 65, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = 0, /* TAH device index */
+ .jumbo = 1, /* Jumbo frames supported */
+};
+
+static struct ocp_func_emac_data ibm440gx_emac3_def = {
+ .rgmii_idx = 0, /* RGMII device index */
+ .rgmii_mux = 1, /* RGMII input of this EMAC */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 3, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 3, /* MAL rx channel number */
+ .mal_tx_chan = 3, /* MAL tx channel number */
+ .wol_irq = 67, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = 1, /* TAH device index */
+ .jumbo = 1, /* Jumbo frames supported */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440gx_mal0_def = {
+ .num_tx_chans = 4, /* Number of TX channels */
+ .num_rx_chans = 4, /* Number of RX channels */
+ .txeob_irq = 10, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 11, /* RX End Of Buffer IRQ */
+ .txde_irq = 33, /* TX Descriptor Error IRQ */
+ .rxde_irq = 34, /* RX Descriptor Error IRQ */
+ .serr_irq = 32, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440gx_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440gx_iic1_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0x0000000140000000ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = PPC440GX_UART0_ADDR,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = PPC440GX_UART1_ADDR,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 0,
+ .paddr = 0x0000000140000400ULL,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm440gx_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 1,
+ .paddr = 0x0000000140000500ULL,
+ .irq = 3,
+ .pm = IBM_CPM_IIC1,
+ .additions = &ibm440gx_iic1_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .index = 0,
+ .paddr = 0x0000000140000700ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gx_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = 0x0000000140000800ULL,
+ .irq = 60,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gx_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 1,
+ .paddr = 0x0000000140000900ULL,
+ .irq = 62,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gx_emac1_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 2,
+ .paddr = 0x0000000140000C00ULL,
+ .irq = 64,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gx_emac2_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 3,
+ .paddr = 0x0000000140000E00ULL,
+ .irq = 66,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440gx_emac3_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_RGMII,
+ .paddr = 0x0000000140000790ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_ZMII,
+ .paddr = 0x0000000140000780ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_TAH,
+ .index = 0,
+ .paddr = 0x0000000140000b50ULL,
+ .irq = 68,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_TAH,
+ .index = 1,
+ .paddr = 0x0000000140000d50ULL,
+ .irq = 69,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xfffffe03,
+ .triggering = 0x01c00000,
+ .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */
+ },
+ { .polarity = 0xffffc0ff,
+ .triggering = 0x00ff8000,
+ .ext_irq_mask = 0x00003f00, /* IRQ7 - IRQ12 */
+ },
+ { .polarity = 0xffff83ff,
+ .triggering = 0x000f83c0,
+ .ext_irq_mask = 0x00007c00, /* IRQ13 - IRQ17 */
+ },
+};
diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h
new file mode 100644
index 0000000..0b59d8d
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440gx.h
@@ -0,0 +1,74 @@
+/*
+ * arch/ppc/platforms/ibm440gx.h
+ *
+ * PPC440GX definitions
+ *
+ * Matt Porter <mporter@mvista.com>
+ *
+ * Copyright 2002 Roland Dreier
+ * Copyright 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440GX_H
+#define __PPC_PLATFORMS_IBM440GX_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440GX_UART0_ADDR 0x0000000140000200ULL
+#define PPC440GX_UART1_ADDR 0x0000000140000300ULL
+#define UART0_INT 0
+#define UART1_INT 1
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
+#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
+#define IBM_CPM_RGMII 0x10000000 /* RGMII */
+#define IBM_CPM_TAHOE0 0x08000000 /* TAHOE 0 */
+#define IBM_CPM_TAHOE1 0x04000000 /* TAHOE 1 */
+#define IBM_CPM_CPU 0x02000000 /* processor core */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
+#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
+#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
+#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
+#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
+#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
+#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
+#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
+#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
+#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
+#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
+#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
+#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */
+#define IBM_CPM_EMAC1 0x00000010 /* EMAC 1 */
+#define IBM_CPM_EMAC2 0x00000008 /* EMAC 2 */
+#define IBM_CPM_EMAC3 0x00000004 /* EMAC 3 */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+ | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+ | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+ | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+ | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+ | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+ | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 2
+
+#endif /* __PPC_PLATFORMS_IBM440GX_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c
new file mode 100644
index 0000000..a203efb
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440sp.c
@@ -0,0 +1,131 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440sp.c
+ *
+ * PPC440SP I/O descriptions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440sp.h>
+#include <asm/ocp.h>
+
+static struct ocp_func_emac_data ibm440sp_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = -1, /* No ZMII */
+ .zmii_mux = -1, /* No ZMII */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 61, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+ .jumbo = 1, /* Jumbo frames supported */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440sp_mal0_def = {
+ .num_tx_chans = 4, /* Number of TX channels */
+ .num_rx_chans = 4, /* Number of RX channels */
+ .txeob_irq = 38, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 39, /* RX End Of Buffer IRQ */
+ .txde_irq = 34, /* TX Descriptor Error IRQ */
+ .rxde_irq = 35, /* RX Descriptor Error IRQ */
+ .serr_irq = 33, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440sp_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440sp_iic1_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0x0000000140000000ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = PPC440SP_UART0_ADDR,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = PPC440SP_UART1_ADDR,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = PPC440SP_UART2_ADDR,
+ .irq = UART2_INT,
+ .pm = IBM_CPM_UART2,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 0,
+ .paddr = 0x00000001f0000400ULL,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm440sp_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 1,
+ .paddr = 0x00000001f0000500ULL,
+ .irq = 3,
+ .pm = IBM_CPM_IIC1,
+ .additions = &ibm440sp_iic1_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .index = 0,
+ .paddr = 0x00000001f0000700ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440sp_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = 0x00000001f0000800ULL,
+ .irq = 60,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440sp_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h
new file mode 100644
index 0000000..c71e46a
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440sp.h
@@ -0,0 +1,64 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440sp.h
+ *
+ * PPC440SP definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440SP_H
+#define __PPC_PLATFORMS_IBM440SP_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440SP_UART0_ADDR 0x00000001f0000200ULL
+#define PPC440SP_UART1_ADDR 0x00000001f0000300ULL
+#define PPC440SP_UART2_ADDR 0x00000001f0000600ULL
+#define UART0_INT 0
+#define UART1_INT 1
+#define UART2_INT 2
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
+#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
+#define IBM_CPM_CPU 0x02000000 /* processor core */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
+#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
+#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
+#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
+#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
+#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
+#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
+#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
+#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
+#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
+#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
+#define IBM_CPM_UART2 0x00000100 /* serial port 1 */
+#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
+#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+ | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+ | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+ | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+ | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+ | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+ | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+#endif /* __PPC_PLATFORMS_IBM440SP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
new file mode 100644
index 0000000..ecdc5be
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmnp405h.c
@@ -0,0 +1,172 @@
+/*
+ * arch/ppc/platforms/4xx/ibmnp405h.c
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platforms/4xx/ibmnp405h.h>
+
+static struct ocp_func_emac_data ibmnp405h_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 41, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibmnp405h_emac1_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 1, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 1, /* MAL rx channel number */
+ .mal_tx_chan = 1, /* MAL tx channel number */
+ .wol_irq = 41, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+static struct ocp_func_emac_data ibmnp405h_emac2_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 2, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 2, /* MAL rx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
+ .wol_irq = 41, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+static struct ocp_func_emac_data ibmnp405h_emac3_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 3, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 3, /* MAL rx channel number */
+ .mal_tx_chan = 3, /* MAL tx channel number */
+ .wol_irq = 41, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibmnp405h_mal0_def = {
+ .num_tx_chans = 8, /* Number of TX channels */
+ .num_rx_chans = 4, /* Number of RX channels */
+ .txeob_irq = 17, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 18, /* RX End Of Buffer IRQ */
+ .txde_irq = 46, /* TX Descriptor Error IRQ */
+ .rxde_irq = 47, /* RX Descriptor Error IRQ */
+ .serr_irq = 45, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibmnp405h_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0xEF600000,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = 0xEF600500,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibmnp405h_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = 0xEF600700,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibmnp405h_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = EMAC0_BASE,
+ .irq = 37,
+ .pm = IBM_CPM_EMAC0,
+ .additions = &ibmnp405h_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 1,
+ .paddr = 0xEF600900,
+ .irq = 38,
+ .pm = IBM_CPM_EMAC1,
+ .additions = &ibmnp405h_emac1_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 2,
+ .paddr = 0xEF600a00,
+ .irq = 39,
+ .pm = IBM_CPM_EMAC2,
+ .additions = &ibmnp405h_emac2_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 3,
+ .paddr = 0xEF600b00,
+ .irq = 40,
+ .pm = IBM_CPM_EMAC3,
+ .additions = &ibmnp405h_emac3_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_ZMII,
+ .paddr = 0xEF600C10,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
new file mode 100644
index 0000000..e2c2b06
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmnp405h.h
@@ -0,0 +1,157 @@
+/*
+ * arch/ppc/platforms/4xx/ibmnp405h.h
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBMNP405H_H__
+#define __ASM_IBMNP405H_H__
+
+#include <linux/config.h>
+
+/* ibm405.h at bottom of this file */
+
+#define PPC405_PCI_CONFIG_ADDR 0xeec00000
+#define PPC405_PCI_CONFIG_DATA 0xeec00004
+#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
+ /* setbat */
+#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
+#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
+#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
+
+#define PPC405_PCI_LOWER_MEM 0x00000000 /* hose_a->mem_space.start */
+#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
+#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
+#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
+
+#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
+
+#define PPC4xx_PCI_IO_ADDR ((uint)PPC405_PCI_PHY_IO_BASE)
+#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
+#define PPC4xx_PCI_CFG_ADDR ((uint)PPC405_PCI_CONFIG_ADDR)
+#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
+#define PPC4xx_PCI_LCFG_ADDR ((uint)0xef400000)
+#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
+#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000)
+#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
+
+/* serial port defines */
+#define RS_TABLE_SIZE 4
+
+#define UART0_INT 0
+#define UART1_INT 1
+#define PCIL0_BASE 0xEF400000
+#define UART0_IO_BASE 0xEF600300
+#define UART1_IO_BASE 0xEF600400
+#define OPB0_BASE 0xEF600600
+#define EMAC0_BASE 0xEF600800
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base:(u8 *) UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(1) \
+ STD_UART_OP(0)
+#endif
+
+/* DCR defines */
+/* ------------------------------------------------------------------------- */
+
+#define DCRN_CHCR_BASE 0x0F1
+#define DCRN_CHPSR_BASE 0x0B4
+#define DCRN_CPMSR_BASE 0x0BA
+#define DCRN_CPMFR_BASE 0x0B9
+#define DCRN_CPMER_BASE 0x0B8
+
+/* CPM Clocking & Power Mangement defines */
+#define IBM_CPM_PCI 0x40000000 /* PCI */
+#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */
+#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */
+#define IBM_CPM_EMAC0 0x00800000 /* EMAC 0 MII */
+#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */
+#define IBM_CPM_EMMII 0 /* Shift value for MII */
+#define IBM_CPM_EMRX 1 /* Shift value for recv */
+#define IBM_CPM_EMTX 2 /* Shift value for MAC */
+#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */
+#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */
+#define IBM_CPM_CPU 0x00008000 /* processor core */
+#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */
+#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */
+#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */
+#define IBM_CPM_HDLC 0x00000800 /* HDCL */
+#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
+#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
+#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
+#define IBM_CPM_DMA 0x00000040 /* DMA controller */
+#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
+#define IBM_CPM_UART0 0x00000002 /* serial port 0 */
+#define IBM_CPM_UART1 0x00000001 /* serial port 1 */
+/* this is the default setting for devices put to sleep when booting */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
+ | IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
+ | IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA \
+ | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2 \
+ | IBM_CPM_EMAC3 | IBM_CPM_PCI)
+
+#define DCRN_DMA0_BASE 0x100
+#define DCRN_DMA1_BASE 0x108
+#define DCRN_DMA2_BASE 0x110
+#define DCRN_DMA3_BASE 0x118
+#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
+#define DCRN_DMASR_BASE 0x120
+#define DCRN_EBC_BASE 0x012
+#define DCRN_DCP0_BASE 0x014
+#define DCRN_MAL_BASE 0x180
+#define DCRN_OCM0_BASE 0x018
+#define DCRN_PLB0_BASE 0x084
+#define DCRN_PLLMR_BASE 0x0B0
+#define DCRN_POB0_BASE 0x0A0
+#define DCRN_SDRAM0_BASE 0x010
+#define DCRN_UIC0_BASE 0x0C0
+#define DCRN_UIC1_BASE 0x0D0
+#define DCRN_CPC0_EPRCSR 0x0F3
+
+#define UIC0_UIC1NC 0x00000002
+
+#define CHR1_CETE 0x00000004 /* CPU external timer enable */
+#define UIC0 DCRN_UIC0_BASE
+#define UIC1 DCRN_UIC1_BASE
+
+#undef NR_UICS
+#define NR_UICS 2
+
+/* EMAC DCRN's FIXME: armin */
+#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
+#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
+#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
+#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
+#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
+#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
+#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
+#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBMNP405H_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c
new file mode 100644
index 0000000..874d16b
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmstb4.c
@@ -0,0 +1,83 @@
+/*
+ * arch/ppc/platforms/4xx/ibmstb4.c
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platforms/4xx/ibmstb4.h>
+
+static struct ocp_func_iic_data ibmstb4_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibmstb4_iic1_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] __initdata = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = UART2_IO_BASE,
+ .irq = UART2_INT,
+ .pm = IBM_CPM_UART2,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = IIC0_BASE,
+ .irq = IIC0_IRQ,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibmstb4_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = IIC1_BASE,
+ .irq = IIC1_IRQ,
+ .pm = IBM_CPM_IIC1,
+ .additions = &ibmstb4_iic1_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = GPIO0_BASE,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IDE,
+ .paddr = IDE0_BASE,
+ .irq = IDE0_IRQ,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_USB,
+ .paddr = USB0_BASE,
+ .irq = USB0_IRQ,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID,
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h
new file mode 100644
index 0000000..bcb4b1e
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmstb4.h
@@ -0,0 +1,238 @@
+/*
+ * arch/ppc/platforms/4xx/ibmstb4.h
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBMSTB4_H__
+#define __ASM_IBMSTB4_H__
+
+#include <linux/config.h>
+
+/* serial port defines */
+#define STB04xxx_IO_BASE ((uint)0xe0000000)
+#define PPC4xx_PCI_IO_ADDR STB04xxx_IO_BASE
+#define PPC4xx_ONB_IO_PADDR STB04xxx_IO_BASE
+#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000)
+#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024)
+
+/*
+ * map STB04xxx internal i/o address (0x400x00xx) to an address
+ * which is below the 2GB limit...
+ *
+ * 4000 000x uart1 -> 0xe000 000x
+ * 4001 00xx ppu
+ * 4002 00xx smart card
+ * 4003 000x iic
+ * 4004 000x uart0
+ * 4005 0xxx timer
+ * 4006 00xx gpio
+ * 4007 00xx smart card
+ * 400b 000x iic
+ * 400c 000x scp
+ * 400d 000x modem
+ * 400e 000x uart2
+*/
+#define STB04xxx_MAP_IO_ADDR(a) (((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
+
+#define RS_TABLE_SIZE 3
+#define UART0_INT 20
+
+#ifdef __BOOTER__
+#define UART0_IO_BASE 0x40040000
+#else
+#define UART0_IO_BASE 0xe0040000
+#endif
+
+#define UART1_INT 21
+
+#ifdef __BOOTER__
+#define UART1_IO_BASE 0x40000000
+#else
+#define UART1_IO_BASE 0xe0000000
+#endif
+
+#define UART2_INT 31
+#ifdef __BOOTER__
+#define UART2_IO_BASE 0x400e0000
+#else
+#define UART2_IO_BASE 0xe00e0000
+#endif
+
+#define IDE0_BASE 0x400F0000
+#define IDE0_SIZE 0x200
+#define IDE0_IRQ 25
+#define IIC0_BASE 0x40030000
+#define IIC1_BASE 0x400b0000
+#define OPB0_BASE 0x40000000
+#define GPIO0_BASE 0x40060000
+
+#define USB0_IRQ 18
+#define USB0_BASE STB04xxx_MAP_IO_ADDR(0x40010000)
+#define USB0_EXTENT 4096
+
+#define IIC_NUMS 2
+#define UART_NUMS 3
+#define IIC0_IRQ 9
+#define IIC1_IRQ 10
+#define IIC_OWN 0x55
+#define IIC_CLOCK 50
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (u8 *)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1) \
+ STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(1) \
+ STD_UART_OP(0) \
+ STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS2)
+#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(2) \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+#endif
+
+#define DCRN_BE_BASE 0x090
+#define DCRN_DMA0_BASE 0x0C0
+#define DCRN_DMA1_BASE 0x0C8
+#define DCRN_DMA2_BASE 0x0D0
+#define DCRN_DMA3_BASE 0x0D8
+#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
+#define DCRN_DMASR_BASE 0x0E0
+#define DCRN_PLB0_BASE 0x054
+#define DCRN_PLB1_BASE 0x064
+#define DCRN_POB0_BASE 0x0B0
+#define DCRN_SCCR_BASE 0x120
+#define DCRN_UIC0_BASE 0x040
+#define DCRN_BE_BASE 0x090
+#define DCRN_DMA0_BASE 0x0C0
+#define DCRN_DMA1_BASE 0x0C8
+#define DCRN_DMA2_BASE 0x0D0
+#define DCRN_DMA3_BASE 0x0D8
+#define DCRN_CIC_BASE 0x030
+#define DCRN_DMASR_BASE 0x0E0
+#define DCRN_EBIMC_BASE 0x070
+#define DCRN_DCRX_BASE 0x020
+#define DCRN_CPMFR_BASE 0x102
+#define DCRN_SCCR_BASE 0x120
+#define UIC0 DCRN_UIC0_BASE
+
+#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
+#define IBM_CPM_USB0 0x40000000 /* IEEE-1284 */
+#define IBM_CPM_IIC1 0x20000000 /* IIC 1 interface */
+#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
+#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
+#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
+#define IBM_CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_DMA1 0x00800000 /* reserved */
+#define IBM_CPM_XPT1 0x00400000 /* reserved */
+#define IBM_CPM_XPT2 0x00200000 /* reserved */
+#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
+#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
+#define IBM_CPM_EPI 0x00040000 /* DCR Extension */
+#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
+#define IBM_CPM_VID 0x00010000 /* reserved */
+#define IBM_CPM_SC1 0x00008000 /* Smart Card 1 */
+#define IBM_CPM_USBSDRA 0x00004000 /* SDRAM 0 memory controller */
+#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */
+#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
+#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
+#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
+#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
+#define IBM_CPM_TMRCLK 0x00000100 /* CPU timers */
+#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
+#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
+#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */
+#define IBM_CPM_UART2 0x00000008 /* Serial Control Port */
+#define IBM_CPM_DDIO 0x00000004 /* Descrambler */
+#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
+ | IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
+ | IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
+ | IBM_CPM_XPT27 | IBM_CPM_UIC )
+
+#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
+#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
+/* DCRN_BESR */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+
+#define CHR1_CETE 0x00800000 /* CPU external timer enable */
+#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
+
+#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
+#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
+#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
+#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
+#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
+#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
+#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
+#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
+#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
+
+#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
+#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
+#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
+#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
+#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
+#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
+#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
+#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
+
+#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
+#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
+#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
+#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
+#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
+#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
+#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
+#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
+#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */
+#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */
+#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */
+#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */
+#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */
+#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */
+#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */
+#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */
+#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */
+#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */
+#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBMSTB4_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c
new file mode 100644
index 0000000..b895b9c
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmstbx25.c
@@ -0,0 +1,68 @@
+/*
+ * arch/ppc/platforms/4xx/ibmstbx25.c
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platforms/4xx/ibmstbx25.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_iic_data ibmstbx25_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] __initdata = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = UART0_IO_BASE,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = UART1_IO_BASE,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = UART2_IO_BASE,
+ .irq = UART2_INT,
+ .pm = IBM_CPM_UART2,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .paddr = IIC0_BASE,
+ .irq = IIC0_IRQ,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibmstbx25_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .paddr = GPIO0_BASE,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xffff8f80,
+ .triggering = 0x00000000,
+ .ext_irq_mask = 0x0000707f, /* IRQ7 - IRQ9, IRQ0 - IRQ6 */
+ }
+};
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h
new file mode 100644
index 0000000..9a2efc3
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibmstbx25.h
@@ -0,0 +1,261 @@
+/*
+ * arch/ppc/platforms/4xx/ibmstbx25.h
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBMSTBX25_H__
+#define __ASM_IBMSTBX25_H__
+
+#include <linux/config.h>
+
+/* serial port defines */
+#define STBx25xx_IO_BASE ((uint)0xe0000000)
+#define PPC4xx_ONB_IO_PADDR STBx25xx_IO_BASE
+#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000)
+#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024)
+
+/*
+ * map STBxxxx internal i/o address (0x400x00xx) to an address
+ * which is below the 2GB limit...
+ *
+ * 4000 000x uart1 -> 0xe000 000x
+ * 4001 00xx uart2
+ * 4002 00xx smart card
+ * 4003 000x iic
+ * 4004 000x uart0
+ * 4005 0xxx timer
+ * 4006 00xx gpio
+ * 4007 00xx smart card
+ * 400b 000x iic
+ * 400c 000x scp
+ * 400d 000x modem
+ * 400e 000x uart2
+*/
+#define STBx25xx_MAP_IO_ADDR(a) (((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000))
+
+#define RS_TABLE_SIZE 3
+
+#define OPB_BASE_START 0x40000000
+#define EBIU_BASE_START 0xF0100000
+#define DCR_BASE_START 0x0000
+
+#ifdef __BOOTER__
+#define UART1_IO_BASE 0x40000000
+#define UART2_IO_BASE 0x40010000
+#else
+#define UART1_IO_BASE 0xe0000000
+#define UART2_IO_BASE 0xe0010000
+#endif
+#define SC0_BASE 0x40020000 /* smart card #0 */
+#define IIC0_BASE 0x40030000
+#ifdef __BOOTER__
+#define UART0_IO_BASE 0x40040000
+#else
+#define UART0_IO_BASE 0xe0040000
+#endif
+#define SCC0_BASE 0x40040000 /* Serial 0 controller IrdA */
+#define GPT0_BASE 0x40050000 /* General purpose timers */
+#define GPIO0_BASE 0x40060000
+#define SC1_BASE 0x40070000 /* smart card #1 */
+#define SCP0_BASE 0x400C0000 /* Serial Controller Port */
+#define SSP0_BASE 0x400D0000 /* Sync serial port */
+
+#define IDE0_BASE 0xf0100000
+#define REDWOOD_IDE_CTRL 0xf1100000
+
+#define RTCFPC_IRQ 0
+#define XPORT_IRQ 1
+#define AUD_IRQ 2
+#define AID_IRQ 3
+#define DMA0 4
+#define DMA1_IRQ 5
+#define DMA2_IRQ 6
+#define DMA3_IRQ 7
+#define SC0_IRQ 8
+#define IIC0_IRQ 9
+#define IIR0_IRQ 10
+#define GPT0_IRQ 11
+#define GPT1_IRQ 12
+#define SCP0_IRQ 13
+#define SSP0_IRQ 14
+#define GPT2_IRQ 15 /* count down timer */
+#define SC1_IRQ 16
+/* IRQ 17 - 19 external */
+#define UART0_INT 20
+#define UART1_INT 21
+#define UART2_INT 22
+#define XPTDMA_IRQ 23
+#define DCRIDE_IRQ 24
+/* IRQ 25 - 30 external */
+#define IDE0_IRQ 26
+
+#define IIC_NUMS 1
+#define UART_NUMS 3
+#define IIC_OWN 0x55
+#define IIC_CLOCK 50
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
+
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (u8 *)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1) \
+ STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(1) \
+ STD_UART_OP(0) \
+ STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS2)
+#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(2) \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+#endif
+
+#define DCRN_BE_BASE 0x090
+#define DCRN_DMA0_BASE 0x0C0
+#define DCRN_DMA1_BASE 0x0C8
+#define DCRN_DMA2_BASE 0x0D0
+#define DCRN_DMA3_BASE 0x0D8
+#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
+#define DCRN_DMASR_BASE 0x0E0
+#define DCRN_PLB0_BASE 0x054
+#define DCRN_PLB1_BASE 0x064
+#define DCRN_POB0_BASE 0x0B0
+#define DCRN_SCCR_BASE 0x120
+#define DCRN_UIC0_BASE 0x040
+#define DCRN_BE_BASE 0x090
+#define DCRN_DMA0_BASE 0x0C0
+#define DCRN_DMA1_BASE 0x0C8
+#define DCRN_DMA2_BASE 0x0D0
+#define DCRN_DMA3_BASE 0x0D8
+#define DCRN_CIC_BASE 0x030
+#define DCRN_DMASR_BASE 0x0E0
+#define DCRN_EBIMC_BASE 0x070
+#define DCRN_DCRX_BASE 0x020
+#define DCRN_CPMFR_BASE 0x102
+#define DCRN_SCCR_BASE 0x120
+#define DCRN_RTCFP_BASE 0x310
+
+#define UIC0 DCRN_UIC0_BASE
+
+#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
+#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
+#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
+#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
+#define IBM_CPM_IRR 0x02000000 /* Infrared receiver */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_UART2 0x00200000 /* Serial Control Port */
+#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
+#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
+#define IBM_PM_DCRIDE 0x00040000 /* DCR timeout & IDE line Mode clock */
+#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
+#define IBM_CPM_VID 0x00010000 /* reserved */
+#define IBM_CPM_SC1 0x00008000 /* Smart Card 0 */
+#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */
+#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
+#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
+#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
+#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
+#define IBM_CPM_C405T 0x00000100 /* CPU timers */
+#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
+#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
+#define IBM_CPM_RTCFPC 0x00000020 /* Realtime clock and front panel */
+#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */
+#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
+#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA \
+ | IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T \
+ | IBM_CPM_XPT27 | IBM_CPM_UIC)
+
+#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
+#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
+/* DCRN_BESR */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+
+#define CHR1_CETE 0x00800000 /* CPU external timer enable */
+#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
+
+#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
+#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
+#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
+#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
+#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
+#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
+#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
+#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
+#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
+
+#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
+#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
+#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
+#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
+#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
+#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
+#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
+#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
+
+#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
+#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
+#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
+#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
+#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
+#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
+#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
+#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
+#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */
+#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */
+#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */
+#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */
+#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */
+#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */
+#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */
+#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */
+#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */
+#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */
+#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */
+
+#define DCRN_RTC_FPC0_CNTL (DCRN_RTCFP_BASE + 0x00) /* RTC cntl */
+#define DCRN_RTC_FPC0_INT (DCRN_RTCFP_BASE + 0x01) /* RTC Interrupt */
+#define DCRN_RTC_FPC0_TIME (DCRN_RTCFP_BASE + 0x02) /* RTC time reg */
+#define DCRN_RTC_FPC0_ALRM (DCRN_RTCFP_BASE + 0x03) /* RTC Alarm reg */
+#define DCRN_RTC_FPC0_D1 (DCRN_RTCFP_BASE + 0x04) /* LED Data 1 */
+#define DCRN_RTC_FPC0_D2 (DCRN_RTCFP_BASE + 0x05) /* LED Data 2 */
+#define DCRN_RTC_FPC0_D3 (DCRN_RTCFP_BASE + 0x06) /* LED Data 3 */
+#define DCRN_RTC_FPC0_D4 (DCRN_RTCFP_BASE + 0x07) /* LED Data 4 */
+#define DCRN_RTC_FPC0_D5 (DCRN_RTCFP_BASE + 0x08) /* LED Data 5 */
+#define DCRN_RTC_FPC0_FCNTL (DCRN_RTCFP_BASE + 0x09) /* LED control */
+#define DCRN_RTC_FPC0_BRT (DCRN_RTCFP_BASE + 0x0A) /* Brightness cntl */
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_IBMSTBX25_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
new file mode 100644
index 0000000..1df2339
--- /dev/null
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -0,0 +1,387 @@
+/*
+ * arch/ppc/platforms/4xx/luan.c
+ *
+ * Luan board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/ibm44x_common.h>
+#include <syslib/ibm440gx_common.h>
+#include <syslib/ibm440sp_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+luan_calibrate_decr(void)
+{
+ unsigned int freq;
+
+ if (mfspr(SPRN_CCR1) & CCR1_TCS)
+ freq = LUAN_TMR_CLK;
+ else
+ freq = clocks.cpu;
+
+ ibm44x_calibrate_decr(freq);
+}
+
+static int
+luan_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
+
+ return 0;
+}
+
+static inline int
+luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+ /* PCIX0 in adapter mode, no host interrupt routing */
+
+ /* PCIX1 */
+ if (hose->index == 0) {
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 49, 49, 49, 49 }, /* IDSEL 1 - PCIX1 Slot 0 */
+ { 49, 49, 49, 49 }, /* IDSEL 2 - PCIX1 Slot 1 */
+ { 49, 49, 49, 49 }, /* IDSEL 3 - PCIX1 Slot 2 */
+ { 49, 49, 49, 49 }, /* IDSEL 4 - PCIX1 Slot 3 */
+ };
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+ /* PCIX2 */
+ } else if (hose->index == 1) {
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 50, 50, 50, 50 }, /* IDSEL 1 - PCIX2 Slot 0 */
+ { 50, 50, 50, 50 }, /* IDSEL 2 - PCIX2 Slot 1 */
+ { 50, 50, 50, 50 }, /* IDSEL 3 - PCIX2 Slot 2 */
+ { 50, 50, 50, 50 }, /* IDSEL 4 - PCIX2 Slot 3 */
+ };
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+ }
+ return -1;
+}
+
+static void __init luan_set_emacdata(void)
+{
+ struct ocp_def *def;
+ struct ocp_func_emac_data *emacdata;
+
+ /* Set phy_map, phy_mode, and mac_addr for the EMAC */
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+ emacdata = def->additions;
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_GMII;
+ memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+}
+
+#define PCIX_READW(offset) \
+ (readw((void *)((u32)pcix_reg_base+offset)))
+
+#define PCIX_WRITEW(value, offset) \
+ (writew(value, (void *)((u32)pcix_reg_base+offset)))
+
+#define PCIX_WRITEL(value, offset) \
+ (writel(value, (void *)((u32)pcix_reg_base+offset)))
+
+static void __init
+luan_setup_pcix(void)
+{
+ int i;
+ void *pcix_reg_base;
+
+ for (i=0;i<3;i++) {
+ pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
+
+ /* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+ PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+ /* Disable all windows */
+ PCIX_WRITEL(0, PCIX0_POM0SA);
+ PCIX_WRITEL(0, PCIX0_POM1SA);
+ PCIX_WRITEL(0, PCIX0_POM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SAH);
+ PCIX_WRITEL(0, PCIX0_PIM1SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+ /*
+ * Setup 512MB PLB->PCI outbound mem window
+ * (a_n000_0000->0_n000_0000)
+ * */
+ PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
+ PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
+ PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+ PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
+ PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
+
+ /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+ PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+ PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
+
+ iounmap(pcix_reg_base);
+ }
+
+ eieio();
+}
+
+static void __init
+luan_setup_hose(struct pci_controller *hose,
+ int lower_mem,
+ int upper_mem,
+ int cfga,
+ int cfgd,
+ u64 pcix_io_base)
+{
+ char name[20];
+
+ sprintf(name, "PCIX%d host bridge", hose->index);
+
+ hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
+
+ pci_init_resource(&hose->io_resource,
+ LUAN_PCIX_LOWER_IO,
+ LUAN_PCIX_UPPER_IO,
+ IORESOURCE_IO,
+ name);
+
+ pci_init_resource(&hose->mem_resources[0],
+ lower_mem,
+ upper_mem,
+ IORESOURCE_MEM,
+ name);
+
+ hose->io_space.start = LUAN_PCIX_LOWER_IO;
+ hose->io_space.end = LUAN_PCIX_UPPER_IO;
+ hose->mem_space.start = lower_mem;
+ hose->mem_space.end = upper_mem;
+ isa_io_base =
+ (unsigned long)ioremap64(pcix_io_base, PCIX_IO_SIZE);
+ hose->io_base_virt = (void *)isa_io_base;
+
+ setup_indirect_pci(hose, cfga, cfgd);
+ hose->set_cfg_type = 1;
+}
+
+static void __init
+luan_setup_hoses(void)
+{
+ struct pci_controller *hose1, *hose2;
+
+ /* Configure windows on the PCI-X host bridge */
+ luan_setup_pcix();
+
+ /* Allocate hoses for PCIX1 and PCIX2 */
+ hose1 = pcibios_alloc_controller();
+ hose2 = pcibios_alloc_controller();
+ if (!hose1 || !hose2)
+ return;
+
+ /* Setup PCIX1 */
+ hose1->first_busno = 0;
+ hose1->last_busno = 0xff;
+
+ luan_setup_hose(hose1,
+ LUAN_PCIX1_LOWER_MEM,
+ LUAN_PCIX1_UPPER_MEM,
+ PCIX1_CFGA,
+ PCIX1_CFGD,
+ PCIX1_IO_BASE);
+
+ hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
+
+ /* Setup PCIX2 */
+ hose2->first_busno = hose1->last_busno + 1;
+ hose2->last_busno = 0xff;
+
+ luan_setup_hose(hose2,
+ LUAN_PCIX2_LOWER_MEM,
+ LUAN_PCIX2_UPPER_MEM,
+ PCIX2_CFGA,
+ PCIX2_CFGD,
+ PCIX2_IO_BASE);
+
+ hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = luan_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+luan_early_serial_map(void)
+{
+ struct uart_port port;
+
+ /* Setup ioremapped serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
+ port.irq = UART0_INT;
+ port.uartclk = clocks.uart0;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+ port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
+ port.irq = UART1_INT;
+ port.uartclk = clocks.uart1;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+
+ port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
+ port.irq = UART2_INT;
+ port.uartclk = BASE_BAUD;
+ port.line = 2;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 2 failed\n");
+ }
+}
+
+static void __init
+luan_setup_arch(void)
+{
+ luan_set_emacdata();
+
+#if !defined(CONFIG_BDI_SWITCH)
+ /*
+ * The Abatron BDI JTAG debugger does not tolerate others
+ * mucking with the debug registers.
+ */
+ mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+#endif
+
+ /*
+ * Determine various clocks.
+ * To be completely correct we should get SysClk
+ * from FPGA, because it can be changed by on-board switches
+ * --ebs
+ */
+ /* 440GX and 440SP clocking is the same -mdp */
+ ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+ ocp_sys_info.opb_bus_freq = clocks.opb;
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ /* Setup PCIXn host bridges */
+ luan_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ luan_early_serial_map();
+
+ /* Identify the system */
+ printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+ unsigned long r5, unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3)
+ __res = *(bd_t *)(r3 + KERNELBASE);
+
+ ibm44x_platform_init();
+
+ ppc_md.setup_arch = luan_setup_arch;
+ ppc_md.show_cpuinfo = luan_show_cpuinfo;
+ ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+
+ ppc_md.calibrate_decr = luan_calibrate_decr;
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = luan_early_serial_map;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
new file mode 100644
index 0000000..09b444c
--- /dev/null
+++ b/arch/ppc/platforms/4xx/luan.h
@@ -0,0 +1,80 @@
+/*
+ * arch/ppc/platforms/4xx/luan.h
+ *
+ * Luan board definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_LUAN_H__
+#define __ASM_LUAN_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm440sp.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0 0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE 0xffe00000
+#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define LUAN_TMR_CLK 25000000
+
+/* Flash */
+#define LUAN_FPGA_REG_0 0x0000000148300000ULL
+#define LUAN_BOOT_LARGE_FLASH(x) (x & 0x40)
+#define LUAN_SMALL_FLASH_LOW 0x00000001ff900000ULL
+#define LUAN_SMALL_FLASH_HIGH 0x00000001ffe00000ULL
+#define LUAN_SMALL_FLASH_SIZE 0x100000
+#define LUAN_LARGE_FLASH_LOW 0x00000001ff800000ULL
+#define LUAN_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
+#define LUAN_LARGE_FLASH_SIZE 0x400000
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE 0xa0000200
+#define UART1_IO_BASE 0xa0000300
+#define UART2_IO_BASE 0xa0000600
+
+#define BASE_BAUD 11059200
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1) \
+ STD_UART_OP(2)
+
+/* PCI support */
+#define LUAN_PCIX_LOWER_IO 0x00000000
+#define LUAN_PCIX_UPPER_IO 0x0000ffff
+#define LUAN_PCIX0_LOWER_MEM 0x80000000
+#define LUAN_PCIX0_UPPER_MEM 0x9fffffff
+#define LUAN_PCIX1_LOWER_MEM 0xa0000000
+#define LUAN_PCIX1_UPPER_MEM 0xbfffffff
+#define LUAN_PCIX2_LOWER_MEM 0xc0000000
+#define LUAN_PCIX2_UPPER_MEM 0xdfffffff
+
+#define LUAN_PCIX_MEM_SIZE 0x20000000
+#define LUAN_PCIX_MEM_OFFSET 0x00000000
+
+#endif /* __ASM_LUAN_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/oak.c b/arch/ppc/platforms/4xx/oak.c
new file mode 100644
index 0000000..fa25ee1
--- /dev/null
+++ b/arch/ppc/platforms/4xx/oak.c
@@ -0,0 +1,255 @@
+/*
+ *
+ * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Module name: oak.c
+ *
+ * Description:
+ * Architecture- / platform-specific boot-time initialization code for
+ * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/time.h>
+
+#include "oak.h"
+
+/* Function Prototypes */
+
+extern void abort(void);
+
+/* Global Variables */
+
+unsigned char __res[sizeof(bd_t)];
+
+
+/*
+ * void __init oak_init()
+ *
+ * Description:
+ * This routine...
+ *
+ * Input(s):
+ * r3 - Optional pointer to a board information structure.
+ * r4 - Optional pointer to the physical starting address of the init RAM
+ * disk.
+ * r5 - Optional pointer to the physical ending address of the init RAM
+ * disk.
+ * r6 - Optional pointer to the physical starting address of any kernel
+ * command-line parameters.
+ * r7 - Optional pointer to the physical ending address of any kernel
+ * command-line parameters.
+ *
+ * Output(s):
+ * N/A
+ *
+ * Returns:
+ * N/A
+ *
+ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
+ }
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *)(r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *)(r6 + KERNELBASE));
+ }
+
+ /* Initialize machine-dependency vectors */
+
+ ppc_md.setup_arch = oak_setup_arch;
+ ppc_md.show_percpuinfo = oak_show_percpuinfo;
+ ppc_md.irq_canonicalize = NULL;
+ ppc_md.init_IRQ = ppc4xx_pic_init;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+ ppc_md.init = NULL;
+
+ ppc_md.restart = oak_restart;
+ ppc_md.power_off = oak_power_off;
+ ppc_md.halt = oak_halt;
+
+ ppc_md.time_init = oak_time_init;
+ ppc_md.set_rtc_time = oak_set_rtc_time;
+ ppc_md.get_rtc_time = oak_get_rtc_time;
+ ppc_md.calibrate_decr = oak_calibrate_decr;
+}
+
+/*
+ * Document me.
+ */
+void __init
+oak_setup_arch(void)
+{
+ /* XXX - Implement me */
+}
+
+/*
+ * int oak_show_percpuinfo()
+ *
+ * Description:
+ * This routine pretty-prints the platform's internal CPU and bus clock
+ * frequencies into the buffer for usage in /proc/cpuinfo.
+ *
+ * Input(s):
+ * *buffer - Buffer into which CPU and bus clock frequencies are to be
+ * printed.
+ *
+ * Output(s):
+ * *buffer - Buffer with the CPU and bus clock frequencies.
+ *
+ * Returns:
+ * The number of bytes copied into 'buffer' if OK, otherwise zero or less
+ * on error.
+ */
+int
+oak_show_percpuinfo(struct seq_file *m, int i)
+{
+ bd_t *bp = (bd_t *)__res;
+
+ seq_printf(m, "clock\t\t: %dMHz\n"
+ "bus clock\t\t: %dMHz\n",
+ bp->bi_intfreq / 1000000,
+ bp->bi_busfreq / 1000000);
+
+ return 0;
+}
+
+/*
+ * Document me.
+ */
+void
+oak_restart(char *cmd)
+{
+ abort();
+}
+
+/*
+ * Document me.
+ */
+void
+oak_power_off(void)
+{
+ oak_restart(NULL);
+}
+
+/*
+ * Document me.
+ */
+void
+oak_halt(void)
+{
+ oak_restart(NULL);
+}
+
+/*
+ * Document me.
+ */
+long __init
+oak_time_init(void)
+{
+ /* XXX - Implement me */
+ return 0;
+}
+
+/*
+ * Document me.
+ */
+int __init
+oak_set_rtc_time(unsigned long time)
+{
+ /* XXX - Implement me */
+
+ return (0);
+}
+
+/*
+ * Document me.
+ */
+unsigned long __init
+oak_get_rtc_time(void)
+{
+ /* XXX - Implement me */
+
+ return (0);
+}
+
+/*
+ * void __init oak_calibrate_decr()
+ *
+ * Description:
+ * This routine retrieves the internal processor frequency from the board
+ * information structure, sets up the kernel timer decrementer based on
+ * that value, enables the 403 programmable interval timer (PIT) and sets
+ * it up for auto-reload.
+ *
+ * Input(s):
+ * N/A
+ *
+ * Output(s):
+ * N/A
+ *
+ * Returns:
+ * N/A
+ *
+ */
+void __init
+oak_calibrate_decr(void)
+{
+ unsigned int freq;
+ bd_t *bip = (bd_t *)__res;
+
+ freq = bip->bi_intfreq;
+
+ decrementer_count = freq / HZ;
+ count_period_num = 1;
+ count_period_den = freq;
+
+ /* Enable the PIT and set auto-reload of its value */
+
+ mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
+
+ /* Clear any pending timer interrupts */
+
+ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
+}
diff --git a/arch/ppc/platforms/4xx/oak.h b/arch/ppc/platforms/4xx/oak.h
new file mode 100644
index 0000000..1b86a4c
--- /dev/null
+++ b/arch/ppc/platforms/4xx/oak.h
@@ -0,0 +1,96 @@
+/*
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Module name: oak.h
+ *
+ * Description:
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * 403G{A,B,C,CX} "Oak" evaluation board. Anything specific to the pro-
+ * cessor itself is defined elsewhere.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_OAK_H__
+#define __ASM_OAK_H__
+
+/* We have an IBM 403G{A,B,C,CX} core */
+#include <asm/ibm403.h>
+
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+
+/* Memory map for the "Oak" evaluation board */
+
+#define PPC403SPU_IO_BASE 0x40000000 /* 403 On-chip serial port */
+#define PPC403SPU_IO_SIZE 0x00000008
+#define OAKSERIAL_IO_BASE 0x7E000000 /* NS16550DV serial port */
+#define OAKSERIAL_IO_SIZE 0x00000008
+#define OAKNET_IO_BASE 0xF4000000 /* NS83902AV Ethernet */
+#define OAKNET_IO_SIZE 0x00000040
+#define OAKPROM_IO_BASE 0xFFFE0000 /* AMD 29F010 Flash ROM */
+#define OAKPROM_IO_SIZE 0x00020000
+
+
+/* Interrupt assignments fixed by the hardware implementation */
+
+/* This is annoying kbuild-2.4 problem. -- Tom */
+
+#define PPC403SPU_RX_INT 4 /* AIC_INT4 */
+#define PPC403SPU_TX_INT 5 /* AIC_INT5 */
+#define OAKNET_INT 27 /* AIC_INT27 */
+#define OAKSERIAL_INT 28 /* AIC_INT28 */
+
+#ifndef __ASSEMBLY__
+/*
+ * Data structure defining board information maintained by the boot
+ * ROM on IBM's "Oak" evaluation board. An effort has been made to
+ * keep the field names consistent with the 8xx 'bd_t' board info
+ * structures.
+ */
+
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* Bus speed, in Hz */
+} bd_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void oak_init(unsigned long r3,
+ unsigned long ird_start,
+ unsigned long ird_end,
+ unsigned long cline_start,
+ unsigned long cline_end);
+extern void oak_setup_arch(void);
+extern int oak_setup_residual(char *buffer);
+extern void oak_init_IRQ(void);
+extern int oak_get_irq(struct pt_regs *regs);
+extern void oak_restart(char *cmd);
+extern void oak_power_off(void);
+extern void oak_halt(void);
+extern void oak_time_init(void);
+extern int oak_set_rtc_time(unsigned long now);
+extern unsigned long oak_get_rtc_time(void);
+extern void oak_calibrate_decr(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+#define PPC4xx_MACHINE_NAME "IBM Oak"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_OAK_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/oak_setup.h b/arch/ppc/platforms/4xx/oak_setup.h
new file mode 100644
index 0000000..8648bd0
--- /dev/null
+++ b/arch/ppc/platforms/4xx/oak_setup.h
@@ -0,0 +1,50 @@
+/*
+ *
+ * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Module name: oak_setup.h
+ *
+ * Description:
+ * Architecture- / platform-specific boot-time initialization code for
+ * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek
+ * <dan@netx4.com>.
+ *
+ */
+
+#ifndef __OAK_SETUP_H__
+#define __OAK_SETUP_H__
+
+#include <asm/ptrace.h>
+#include <asm/board.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern unsigned char __res[sizeof(bd_t)];
+
+extern void oak_init(unsigned long r3,
+ unsigned long ird_start,
+ unsigned long ird_end,
+ unsigned long cline_start,
+ unsigned long cline_end);
+extern void oak_setup_arch(void);
+extern int oak_setup_residual(char *buffer);
+extern void oak_init_IRQ(void);
+extern int oak_get_irq(struct pt_regs *regs);
+extern void oak_restart(char *cmd);
+extern void oak_power_off(void);
+extern void oak_halt(void);
+extern void oak_time_init(void);
+extern int oak_set_rtc_time(unsigned long now);
+extern unsigned long oak_get_rtc_time(void);
+extern void oak_calibrate_decr(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __OAK_SETUP_H__ */
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
new file mode 100644
index 0000000..28de707
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -0,0 +1,367 @@
+/*
+ * arch/ppc/platforms/4xx/ocotea.c
+ *
+ * Ocotea board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2003-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+ocotea_calibrate_decr(void)
+{
+ unsigned int freq;
+
+ if (mfspr(SPRN_CCR1) & CCR1_TCS)
+ freq = OCOTEA_TMR_CLK;
+ else
+ freq = clocks.cpu;
+
+ ibm44x_calibrate_decr(freq);
+}
+
+static int
+ocotea_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
+ ibm440gx_show_cpuinfo(m);
+ return 0;
+}
+
+static inline int
+ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 23, 23, 23, 23 }, /* IDSEL 1 - PCI Slot 0 */
+ { 24, 24, 24, 24 }, /* IDSEL 2 - PCI Slot 1 */
+ { 25, 25, 25, 25 }, /* IDSEL 3 - PCI Slot 2 */
+ { 26, 26, 26, 26 }, /* IDSEL 4 - PCI Slot 3 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init ocotea_set_emacdata(void)
+{
+ struct ocp_def *def;
+ struct ocp_func_emac_data *emacdata;
+ int i;
+
+ /*
+ * Note: Current rev. board only operates in Group 4a
+ * mode, so we always set EMAC0-1 for SMII and EMAC2-3
+ * for RGMII (though these could run in RTBI just the same).
+ *
+ * The FPGA reg 3 information isn't even suitable for
+ * determining the phy_mode, so if the board becomes
+ * usable in !4a, it will be necessary to parse an environment
+ * variable from the firmware or similar to properly configure
+ * the phy_map/phy_mode.
+ */
+ /* Set phy_map, phy_mode, and mac_addr for each EMAC */
+ for (i=0; i<4; i++) {
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+ emacdata = def->additions;
+ if (i < 2) {
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_SMII;
+ }
+ else {
+ emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
+ emacdata->phy_mode = PHY_MODE_RGMII;
+ }
+ if (i == 0)
+ memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+ else if (i == 1)
+ memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+ else if (i == 2)
+ memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
+ else if (i == 3)
+ memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
+ }
+}
+
+#define PCIX_READW(offset) \
+ (readw(pcix_reg_base+offset))
+
+#define PCIX_WRITEW(value, offset) \
+ (writew(value, pcix_reg_base+offset))
+
+#define PCIX_WRITEL(value, offset) \
+ (writel(value, pcix_reg_base+offset))
+
+/*
+ * FIXME: This is only here to "make it work". This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+ocotea_setup_pcix(void)
+{
+ void *pcix_reg_base;
+
+ pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+ /* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+ PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+ /* Disable all windows */
+ PCIX_WRITEL(0, PCIX0_POM0SA);
+ PCIX_WRITEL(0, PCIX0_POM1SA);
+ PCIX_WRITEL(0, PCIX0_POM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SAH);
+ PCIX_WRITEL(0, PCIX0_PIM1SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+ /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+ PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+ PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+ PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+ /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+ PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+
+ eieio();
+}
+
+static void __init
+ocotea_setup_hose(void)
+{
+ struct pci_controller *hose;
+
+ /* Configure windows on the PCI-X host bridge */
+ ocotea_setup_pcix();
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
+
+ pci_init_resource(&hose->io_resource,
+ OCOTEA_PCI_LOWER_IO,
+ OCOTEA_PCI_UPPER_IO,
+ IORESOURCE_IO,
+ "PCI host bridge");
+
+ pci_init_resource(&hose->mem_resources[0],
+ OCOTEA_PCI_LOWER_MEM,
+ OCOTEA_PCI_UPPER_MEM,
+ IORESOURCE_MEM,
+ "PCI host bridge");
+
+ hose->io_space.start = OCOTEA_PCI_LOWER_IO;
+ hose->io_space.end = OCOTEA_PCI_UPPER_IO;
+ hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
+ hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
+ isa_io_base =
+ (unsigned long)ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
+ hose->io_base_virt = (void *)isa_io_base;
+
+ setup_indirect_pci(hose,
+ OCOTEA_PCI_CFGA_PLB32,
+ OCOTEA_PCI_CFGD_PLB32);
+ hose->set_cfg_type = 1;
+
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = ocotea_map_irq;
+}
+
+
+TODC_ALLOC();
+
+static void __init
+ocotea_early_serial_map(void)
+{
+ struct uart_port port;
+
+ /* Setup ioremapped serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
+ port.irq = UART0_INT;
+ port.uartclk = clocks.uart0;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(0, &port);
+#endif
+
+ port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
+ port.irq = UART1_INT;
+ port.uartclk = clocks.uart1;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(1, &port);
+#endif
+}
+
+static void __init
+ocotea_setup_arch(void)
+{
+ ocotea_set_emacdata();
+
+ ibm440gx_tah_enable();
+
+ /* Setup TODC access */
+ TODC_INIT(TODC_TYPE_DS1743,
+ 0,
+ 0,
+ ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
+ 8);
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ /* Setup PCI host bridge */
+ ocotea_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ ocotea_early_serial_map();
+
+ /* Identify the system */
+ printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
+}
+
+static void __init ocotea_init(void)
+{
+ ibm440gx_l2c_setup(&clocks);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+ unsigned long r5, unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3)
+ __res = *(bd_t *)(r3 + KERNELBASE);
+
+ /*
+ * Determine various clocks.
+ * To be completely correct we should get SysClk
+ * from FPGA, because it can be changed by on-board switches
+ * --ebs
+ */
+ ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+ ocp_sys_info.opb_bus_freq = clocks.opb;
+
+ ibm44x_platform_init();
+
+ ppc_md.setup_arch = ocotea_setup_arch;
+ ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+
+ ppc_md.calibrate_decr = ocotea_calibrate_decr;
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = ocotea_early_serial_map;
+#endif
+ ppc_md.init = ocotea_init;
+}
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
new file mode 100644
index 0000000..202dc82
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ocotea.h
@@ -0,0 +1,88 @@
+/*
+ * arch/ppc/platforms/ocotea.h
+ *
+ * Ocotea board definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2003-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_OCOTEA_H__
+#define __ASM_OCOTEA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm440gx.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0 0xe0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE 0xfff00000
+#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xb0500)
+#define PIBS_MAC_SIZE 0x200
+#define PIBS_MAC_OFFSET 0x100
+
+/* External timer clock frequency */
+#define OCOTEA_TMR_CLK 25000000
+
+/* RTC/NVRAM location */
+#define OCOTEA_RTC_ADDR 0x0000000148000000ULL
+#define OCOTEA_RTC_SIZE 0x2000
+
+/* Flash */
+#define OCOTEA_FPGA_REG_0 0x0000000148300000ULL
+#define OCOTEA_BOOT_LARGE_FLASH(x) (x & 0x40)
+#define OCOTEA_SMALL_FLASH_LOW 0x00000001ff900000ULL
+#define OCOTEA_SMALL_FLASH_HIGH 0x00000001fff00000ULL
+#define OCOTEA_SMALL_FLASH_SIZE 0x100000
+#define OCOTEA_LARGE_FLASH_LOW 0x00000001ff800000ULL
+#define OCOTEA_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
+#define OCOTEA_LARGE_FLASH_SIZE 0x400000
+
+/* FPGA_REG_3 (Ethernet Groups) */
+#define OCOTEA_FPGA_REG_3 0x0000000148300003ULL
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 2
+
+/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
+
+#define BASE_BAUD 11059200/16
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+
+/* PCI support */
+#define OCOTEA_PCI_LOWER_IO 0x00000000
+#define OCOTEA_PCI_UPPER_IO 0x0000ffff
+#define OCOTEA_PCI_LOWER_MEM 0x80000000
+#define OCOTEA_PCI_UPPER_MEM 0xffffefff
+
+#define OCOTEA_PCI_CFGREGS_BASE 0x000000020ec00000ULL
+#define OCOTEA_PCI_CFGA_PLB32 0x0ec00000
+#define OCOTEA_PCI_CFGD_PLB32 0x0ec00004
+
+#define OCOTEA_PCI_IO_BASE 0x0000000208000000ULL
+#define OCOTEA_PCI_IO_SIZE 0x00010000
+#define OCOTEA_PCI_MEM_OFFSET 0x00000000
+
+#endif /* __ASM_OCOTEA_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c
new file mode 100644
index 0000000..2f5e410
--- /dev/null
+++ b/arch/ppc/platforms/4xx/redwood5.c
@@ -0,0 +1,110 @@
+/*
+ * arch/ppc/platforms/4xx/redwood5.c
+ *
+ * Support for the IBM redwood5 eval board file
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC91111_BASE_ADDR,
+ .end = SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC91111_IRQ,
+ .end = SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *redwood5_devs[] __initdata = {
+ &smc91x_device,
+};
+
+static int __init
+redwood5_platform_add_devices(void)
+{
+ return platform_add_devices(redwood5_devs, ARRAY_SIZE(redwood5_devs));
+}
+
+void __init
+redwood5_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+#ifdef CONFIG_DEBUG_BRINGUP
+ printk("\n");
+ printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
+ printk("\n");
+ printk("bi_s_version\t %s\n", bip->bi_s_version);
+ printk("bi_r_version\t %s\n", bip->bi_r_version);
+ printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
+ printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
+ bip->bi_enetaddr[0], bip->bi_enetaddr[1],
+ bip->bi_enetaddr[2], bip->bi_enetaddr[3],
+ bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
+
+ printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
+ bip->bi_intfreq, bip->bi_intfreq/ 1000000);
+
+ printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
+ bip->bi_busfreq, bip->bi_busfreq / 1000000 );
+ printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
+ bip->bi_tbfreq, bip->bi_tbfreq/1000000);
+
+ printk("\n");
+#endif
+ device_initcall(redwood5_platform_add_devices);
+}
+
+void __init
+redwood5_map_io(void)
+{
+ int i;
+
+ ppc4xx_map_io();
+ for (i = 0; i < 16; i++) {
+ unsigned long v, p;
+
+ /* 0x400x0000 -> 0xe00x0000 */
+ p = 0x40000000 | (i << 16);
+ v = STB04xxx_IO_BASE | (i << 16);
+
+ io_block_mapping(v, p, PAGE_SIZE,
+ _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) | _PAGE_GUARDED);
+ }
+
+
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = redwood5_setup_arch;
+ ppc_md.setup_io_mappings = redwood5_map_io;
+}
diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h
new file mode 100644
index 0000000..264e34f
--- /dev/null
+++ b/arch/ppc/platforms/4xx/redwood5.h
@@ -0,0 +1,54 @@
+/*
+ * arch/ppc/platforms/4xx/redwood5.h
+ *
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * STB03xxx "Redwood" evaluation board.
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_REDWOOD5_H__
+#define __ASM_REDWOOD5_H__
+
+/* Redwood5 has an STB04xxx core */
+#include <platforms/4xx/ibmstb4.h>
+
+#ifndef __ASSEMBLY__
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned int bi_dummy; /* field shouldn't exist */
+ unsigned char bi_enetaddr[6]; /* Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* Bus speed, in Hz */
+ unsigned int bi_tbfreq; /* Software timebase freq */
+} bd_t;
+#endif /* !__ASSEMBLY__ */
+
+
+#define SMC91111_BASE_ADDR 0xf2000300
+#define SMC91111_REG_SIZE 16
+#define SMC91111_IRQ 28
+
+#ifdef MAX_HWIFS
+#undef MAX_HWIFS
+#endif
+#define MAX_HWIFS 1
+
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+
+#define BASE_BAUD (378000000 / 18 / 16)
+
+#define PPC4xx_MACHINE_NAME "IBM Redwood5"
+
+#endif /* __ASM_REDWOOD5_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c
new file mode 100644
index 0000000..8b10129
--- /dev/null
+++ b/arch/ppc/platforms/4xx/redwood6.c
@@ -0,0 +1,159 @@
+/*
+ * arch/ppc/platforms/4xx/redwood6.c
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/ppc4xx_pic.h>
+#include <linux/delay.h>
+#include <asm/machdep.h>
+
+/*
+ * Define external IRQ senses and polarities.
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 7 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 8 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 9 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 4 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 5 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 6 */
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC91111_BASE_ADDR,
+ .end = SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC91111_IRQ,
+ .end = SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *redwood6_devs[] __initdata = {
+ &smc91x_device,
+};
+
+static int __init
+redwood6_platform_add_devices(void)
+{
+ return platform_add_devices(redwood6_devs, ARRAY_SIZE(redwood6_devs));
+}
+
+
+void __init
+redwood6_setup_arch(void)
+{
+#ifdef CONFIG_IDE
+ void *xilinx, *xilinx_1, *xilinx_2;
+ unsigned short us_reg5;
+#endif
+
+ ppc4xx_setup_arch();
+
+#ifdef CONFIG_IDE
+ xilinx = (unsigned long) ioremap(IDE_XLINUX_MUX_BASE, 0x10);
+ /* init xilinx control registers - enable ide mux, clear reset bit */
+ if (!xilinx) {
+ printk(KERN_CRIT
+ "redwood6_setup_arch() xilinxi ioremap failed\n");
+ return;
+ }
+ xilinx_1 = xilinx + 0xa;
+ xilinx_2 = xilinx + 0xe;
+
+ us_reg5 = readb(xilinx_1);
+ writeb(0x01d1, xilinx_1);
+ writeb(0x0008, xilinx_2);
+
+ udelay(10 * 1000);
+
+ writeb(0x01d1, xilinx_1);
+ writeb(0x0008, xilinx_2);
+#endif
+
+#ifdef DEBUG_BRINGUP
+ bd_t *bip = (bd_t *) __res;
+ printk("\n");
+ printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
+ printk("\n");
+ printk("bi_s_version\t %s\n", bip->bi_s_version);
+ printk("bi_r_version\t %s\n", bip->bi_r_version);
+ printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
+ bip->bi_memsize / (1024 * 1000));
+ printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
+ bip->bi_enetaddr[0], bip->bi_enetaddr[1], bip->bi_enetaddr[2],
+ bip->bi_enetaddr[3], bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
+
+ printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
+ bip->bi_intfreq, bip->bi_intfreq / 1000000);
+
+ printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
+ bip->bi_busfreq, bip->bi_busfreq / 1000000);
+ printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
+ bip->bi_tbfreq, bip->bi_tbfreq / 1000000);
+
+ printk("\n");
+#endif
+
+ /* Identify the system */
+ printk(KERN_INFO "IBM Redwood6 (STBx25XX) Platform\n");
+ printk(KERN_INFO
+ "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+
+ device_initcall(redwood6_platform_add_devices);
+}
+
+void __init
+redwood6_map_io(void)
+{
+ int i;
+
+ ppc4xx_map_io();
+ for (i = 0; i < 16; i++) {
+ unsigned long v, p;
+
+ /* 0x400x0000 -> 0xe00x0000 */
+ p = 0x40000000 | (i << 16);
+ v = STBx25xx_IO_BASE | (i << 16);
+
+ io_block_mapping(v, p, PAGE_SIZE,
+ _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) |
+ _PAGE_GUARDED);
+ }
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = redwood6_setup_arch;
+ ppc_md.setup_io_mappings = redwood6_map_io;
+}
diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h
new file mode 100644
index 0000000..1814b9f
--- /dev/null
+++ b/arch/ppc/platforms/4xx/redwood6.h
@@ -0,0 +1,55 @@
+/*
+ * arch/ppc/platforms/4xx/redwood6.h
+ *
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * STBx25xx "Redwood6" evaluation board.
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_REDWOOD5_H__
+#define __ASM_REDWOOD5_H__
+
+/* Redwood6 has an STBx25xx core */
+#include <platforms/4xx/ibmstbx25.h>
+
+#ifndef __ASSEMBLY__
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned int bi_dummy; /* field shouldn't exist */
+ unsigned char bi_enetaddr[6]; /* Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* Bus speed, in Hz */
+ unsigned int bi_tbfreq; /* Software timebase freq */
+} bd_t;
+#endif /* !__ASSEMBLY__ */
+
+#define SMC91111_BASE_ADDR 0xf2030300
+#define SMC91111_REG_SIZE 16
+#define SMC91111_IRQ 27
+#define IDE_XLINUX_MUX_BASE 0xf2040000
+#define IDE_DMA_ADDR 0xfce00000
+
+#ifdef MAX_HWIFS
+#undef MAX_HWIFS
+#endif
+#define MAX_HWIFS 1
+
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+
+#define BASE_BAUD (378000000 / 18 / 16)
+
+#define PPC4xx_MACHINE_NAME "IBM Redwood6"
+
+#endif /* __ASM_REDWOOD5_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
new file mode 100644
index 0000000..d8019ee
--- /dev/null
+++ b/arch/ppc/platforms/4xx/sycamore.c
@@ -0,0 +1,278 @@
+/*
+ * arch/ppc/platforms/4xx/sycamore.c
+ *
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards.
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/rtc.h>
+
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/ibm_ocp_pci.h>
+#include <asm/todc.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+void *kb_cs;
+void *kb_data;
+void *sycamore_rtc_base;
+
+/*
+ * Define external IRQ senses and polarities.
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 7 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 8 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 9 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 10 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 11 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 12 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 4 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 5 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 6 */
+};
+
+
+/* Some IRQs unique to Sycamore.
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
+ {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
+ {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
+ {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+};
+
+void __init
+sycamore_setup_arch(void)
+{
+#define SYCAMORE_PS2_BASE 0xF0100000
+#define SYCAMORE_FPGA_BASE 0xF0300000
+
+ void *fpga_brdc;
+ unsigned char fpga_brdc_data;
+ void *fpga_enable;
+ void *fpga_polarity;
+ void *fpga_status;
+ void *fpga_trigger;
+
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 1);
+
+ kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
+ if (!kb_data) {
+ printk(KERN_CRIT
+ "sycamore_setup_arch() kb_data ioremap failed\n");
+ return;
+ }
+
+ kb_cs = kb_data + 1;
+
+ fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
+ if (!fpga_status) {
+ printk(KERN_CRIT
+ "sycamore_setup_arch() fpga_status ioremap failed\n");
+ return;
+ }
+
+ fpga_enable = fpga_status + 1;
+ fpga_polarity = fpga_status + 2;
+ fpga_trigger = fpga_status + 3;
+ fpga_brdc = fpga_status + 4;
+
+ /* split the keyboard and mouse interrupts */
+ fpga_brdc_data = readb(fpga_brdc);
+ fpga_brdc_data |= 0x80;
+ writeb(fpga_brdc_data, fpga_brdc);
+
+ writeb(0x3, fpga_enable);
+
+ writeb(0x3, fpga_polarity);
+
+ writeb(0x3, fpga_trigger);
+
+ /* RTC step for the sycamore */
+ sycamore_rtc_base = (void *) SYCAMORE_RTC_VADDR;
+ TODC_INIT(TODC_TYPE_DS1743, sycamore_rtc_base, sycamore_rtc_base,
+ sycamore_rtc_base, 8);
+
+ /* Identify the system */
+ printk(KERN_INFO "IBM Sycamore (IBM405GPr) Platform\n");
+ printk(KERN_INFO
+ "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+#ifdef CONFIG_PCI
+ unsigned int bar_response, bar;
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ * The following code is simplified by assuming that the bootrom
+ * has been well behaved in following this mapping.
+ */
+
+#ifdef DEBUG
+ int i;
+
+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+ printk("PCI bridge regs before fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
+
+ /* Disable region first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Enable inbound region one - 1GB size */
+ out_le32((void *) &(pcip->ptm1ms), 0xc0000001);
+
+ /* Disable outbound region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+
+ /* Disable inbound region two */
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+
+ /* Disable outbound region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+
+ /* Zero config bars */
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ 0x00000000);
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+ /* end work arround */
+
+#ifdef DEBUG
+ printk("PCI bridge regs after fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+#endif
+
+}
+
+void __init
+sycamore_map_io(void)
+{
+ ppc4xx_map_io();
+ io_block_mapping(SYCAMORE_RTC_VADDR,
+ SYCAMORE_RTC_PADDR, SYCAMORE_RTC_SIZE, _PAGE_IO);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = sycamore_setup_arch;
+ ppc_md.setup_io_mappings = sycamore_map_io;
+
+#ifdef CONFIG_GEN_RTC
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
new file mode 100644
index 0000000..3e7b4e2
--- /dev/null
+++ b/arch/ppc/platforms/4xx/sycamore.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/platforms/4xx/sycamore.h
+ *
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * 405GPr "Sycamore" evaluation board.
+ *
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2000 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_SYCAMORE_H__
+#define __ASM_SYCAMORE_H__
+
+#include <platforms/4xx/ibm405gpr.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Data structure defining board information maintained by the boot
+ * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
+ * keep the field names consistent with the 8xx 'bd_t' board info
+ * structures.
+ */
+
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+
+/* Memory map for the IBM "Sycamore" 405GP evaluation board.
+ * Generic 4xx plus RTC.
+ */
+
+extern void *sycamore_rtc_base;
+#define SYCAMORE_RTC_PADDR ((uint)0xf0000000)
+#define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR
+#define SYCAMORE_RTC_SIZE ((uint)8*1024)
+
+#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
+#define BASE_BAUD 201600
+#else
+#define BASE_BAUD 691200
+#endif
+
+#define SYCAMORE_PS2_BASE 0xF0100000
+#define SYCAMORE_FPGA_BASE 0xF0300000
+
+#define PPC4xx_MACHINE_NAME "IBM Sycamore"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_SYCAMORE_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c
new file mode 100644
index 0000000..097cc9d
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex-ii_pro.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ppc/platforms/4xx/virtex-ii_pro.c
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include "virtex-ii_pro.h"
+
+/* Have OCP take care of the serial ports. */
+struct ocp_def core_ocp[] = {
+#ifdef XPAR_UARTNS550_0_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = XPAR_UARTNS550_0_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_1_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = XPAR_UARTNS550_1_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_2_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = XPAR_UARTNS550_2_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_3_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 3,
+ .paddr = XPAR_UARTNS550_3_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_4_BASEADDR
+#error Edit this file to add more devices.
+#endif /* 4 */
+#endif /* 3 */
+#endif /* 2 */
+#endif /* 1 */
+#endif /* 0 */
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h
new file mode 100644
index 0000000..9014c48
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex-ii_pro.h
@@ -0,0 +1,99 @@
+/*
+ * arch/ppc/platforms/4xx/virtex-ii_pro.h
+ *
+ * Include file that defines the Xilinx Virtex-II Pro processor
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_VIRTEXIIPRO_H__
+#define __ASM_VIRTEXIIPRO_H__
+
+#include <linux/config.h>
+#include <asm/xparameters.h>
+
+/* serial defines */
+
+#define RS_TABLE_SIZE 4 /* change this and add more devices below
+ if you have more then 4 16x50 UARTs */
+
+#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
+
+/* The serial ports in the Virtex-II Pro have each I/O byte in the
+ * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
+ * change the byte offsets into word offsets. In addition the base
+ * addresses need to have 3 added to them to get to the LSByte.
+ */
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+ ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM},
+
+#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define ML300_UART0 STD_UART_OP(0)
+#else
+#define ML300_UART0
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define ML300_UART1 STD_UART_OP(1)
+#else
+#define ML300_UART1
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define ML300_UART2 STD_UART_OP(2)
+#else
+#define ML300_UART2
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define ML300_UART3 STD_UART_OP(3)
+#else
+#define ML300_UART3
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
+#error Edit this file to add more devices.
+#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define NR_SER_PORTS 4
+#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define NR_SER_PORTS 3
+#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define NR_SER_PORTS 2
+#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define NR_SER_PORTS 1
+#else
+#define NR_SER_PORTS 0
+#endif
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_PORT_DFNS \
+ ML300_UART0 \
+ ML300_UART1 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_PORT_DFNS \
+ ML300_UART1 \
+ ML300_UART0 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#define DCRN_CPMFR_BASE 0
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_VIRTEXIIPRO_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
new file mode 100644
index 0000000..a33eda4
--- /dev/null
+++ b/arch/ppc/platforms/4xx/walnut.c
@@ -0,0 +1,249 @@
+/*
+ * arch/ppc/platforms/4xx/walnut.c
+ *
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/rtc.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+#include <asm/todc.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+void *kb_cs;
+void *kb_data;
+void *walnut_rtc_base;
+
+/* Some IRQs unique to Walnut.
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
+ {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
+ {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
+ {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+};
+
+void __init
+walnut_setup_arch(void)
+{
+
+ void *fpga_brdc;
+ unsigned char fpga_brdc_data;
+ void *fpga_enable;
+ void *fpga_polarity;
+ void *fpga_status;
+ void *fpga_trigger;
+
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 0);
+
+ kb_data = ioremap(WALNUT_PS2_BASE, 8);
+ if (!kb_data) {
+ printk(KERN_CRIT
+ "walnut_setup_arch() kb_data ioremap failed\n");
+ return;
+ }
+
+ kb_cs = kb_data + 1;
+
+ fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
+ if (!fpga_status) {
+ printk(KERN_CRIT
+ "walnut_setup_arch() fpga_status ioremap failed\n");
+ return;
+ }
+
+ fpga_enable = fpga_status + 1;
+ fpga_polarity = fpga_status + 2;
+ fpga_trigger = fpga_status + 3;
+ fpga_brdc = fpga_status + 4;
+
+ /* split the keyboard and mouse interrupts */
+ fpga_brdc_data = readb(fpga_brdc);
+ fpga_brdc_data |= 0x80;
+ writeb(fpga_brdc_data, fpga_brdc);
+
+ writeb(0x3, fpga_enable);
+
+ writeb(0x3, fpga_polarity);
+
+ writeb(0x3, fpga_trigger);
+
+ /* RTC step for the walnut */
+ walnut_rtc_base = (void *) WALNUT_RTC_VADDR;
+ TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base,
+ walnut_rtc_base, 8);
+ /* Identify the system */
+ printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n");
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+#ifdef CONFIG_PCI
+ unsigned int bar_response, bar;
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ * The following code is simplified by assuming that the bootrom
+ * has been well behaved in following this mapping.
+ */
+
+#ifdef DEBUG
+ int i;
+
+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+ printk("PCI bridge regs before fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
+
+ /* Disable region first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Disable region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm1ms), 0x00000000);
+
+ /* Disable region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+
+ /* Zero config bars */
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ 0x00000000);
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+ /* end work arround */
+
+#ifdef DEBUG
+ printk("PCI bridge regs after fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+#endif
+}
+
+void __init
+walnut_map_io(void)
+{
+ ppc4xx_map_io();
+ io_block_mapping(WALNUT_RTC_VADDR,
+ WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = walnut_setup_arch;
+ ppc_md.setup_io_mappings = walnut_map_io;
+
+#ifdef CONFIG_GEN_RTC
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
new file mode 100644
index 0000000..04cfbf3
--- /dev/null
+++ b/arch/ppc/platforms/4xx/walnut.h
@@ -0,0 +1,72 @@
+/*
+ * arch/ppc/platforms/4xx/walnut.h
+ *
+ * Macros, definitions, and data structures specific to the IBM PowerPC
+ * 405GP "Walnut" evaluation board.
+ *
+ * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
+ * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
+ * source@mvista.com
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * 2000 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_WALNUT_H__
+#define __ASM_WALNUT_H__
+
+/* We have a 405GP core */
+#include <platforms/4xx/ibm405gp.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Data structure defining board information maintained by the boot
+ * ROM on IBM's "Walnut" evaluation board. An effort has been made to
+ * keep the field names consistent with the 8xx 'bd_t' board info
+ * structures.
+ */
+
+typedef struct board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+
+/* Memory map for the IBM "Walnut" 405GP evaluation board.
+ * Generic 4xx plus RTC.
+ */
+
+extern void *walnut_rtc_base;
+#define WALNUT_RTC_PADDR ((uint)0xf0000000)
+#define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
+#define WALNUT_RTC_SIZE ((uint)8*1024)
+
+#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
+#define BASE_BAUD 201600
+#else
+#define BASE_BAUD 691200
+#endif
+
+#define WALNUT_PS2_BASE 0xF0100000
+#define WALNUT_FPGA_BASE 0xF0300000
+
+#define PPC4xx_MACHINE_NAME "IBM Walnut"
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_WALNUT_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
new file mode 100644
index 0000000..0b1b77d
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -0,0 +1,146 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml300.c
+ *
+ * Xilinx ML300 evaluation board initialization
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serialP.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+
+#include <platforms/4xx/virtex-ii_pro.h> /* for NR_SER_PORTS */
+
+/*
+ * As an overview of how the following functions (platform_init,
+ * ml300_map_io, ml300_setup_arch and ml300_init_IRQ) fit into the
+ * kernel startup procedure, here's a call tree:
+ *
+ * start_here arch/ppc/kernel/head_4xx.S
+ * early_init arch/ppc/kernel/setup.c
+ * machine_init arch/ppc/kernel/setup.c
+ * platform_init this file
+ * ppc4xx_init arch/ppc/syslib/ppc4xx_setup.c
+ * parse_bootinfo
+ * find_bootinfo
+ * "setup some default ppc_md pointers"
+ * MMU_init arch/ppc/mm/init.c
+ * *ppc_md.setup_io_mappings == ml300_map_io this file
+ * ppc4xx_map_io arch/ppc/syslib/ppc4xx_setup.c
+ * start_kernel init/main.c
+ * setup_arch arch/ppc/kernel/setup.c
+ * #if defined(CONFIG_KGDB)
+ * *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
+ * #endif
+ * *ppc_md.setup_arch == ml300_setup_arch this file
+ * ppc4xx_setup_arch arch/ppc/syslib/ppc4xx_setup.c
+ * ppc4xx_find_bridges arch/ppc/syslib/ppc405_pci.c
+ * init_IRQ arch/ppc/kernel/irq.c
+ * *ppc_md.init_IRQ == ml300_init_IRQ this file
+ * ppc4xx_init_IRQ arch/ppc/syslib/ppc4xx_setup.c
+ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c
+ */
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+
+static volatile unsigned *powerdown_base =
+ (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
+
+static void
+xilinx_power_off(void)
+{
+ local_irq_disable();
+ out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
+ while (1) ;
+}
+#endif
+
+void __init
+ml300_map_io(void)
+{
+ ppc4xx_map_io();
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+ powerdown_base = ioremap((unsigned long) powerdown_base,
+ XPAR_POWER_0_POWERDOWN_HIGHADDR -
+ XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
+#endif
+}
+
+static void __init
+ml300_early_serial_map(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ struct serial_state old_ports[] = { SERIAL_PORT_DFNS };
+ struct uart_port port;
+ int i;
+
+ /* Setup ioremapped serial port access */
+ for (i = 0; i < ARRAY_SIZE(old_ports); i++ ) {
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap((phys_addr_t)(old_ports[i].iomem_base), 16);
+ port.irq = old_ports[i].irq;
+ port.uartclk = old_ports[i].baud_base * 16;
+ port.regshift = old_ports[i].iomem_reg_shift;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = i;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port %d failed\n", i);
+ }
+ }
+#endif /* CONFIG_SERIAL_8250 */
+}
+
+void __init
+ml300_setup_arch(void)
+{
+ ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */
+
+ ml300_early_serial_map();
+
+ /* Identify the system */
+ printk(KERN_INFO "Xilinx Virtex-II Pro port\n");
+ printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+}
+
+/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
+void __init
+ml300_init_irq(void)
+{
+ ppc4xx_init_IRQ();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = ml300_setup_arch;
+ ppc_md.setup_io_mappings = ml300_map_io;
+ ppc_md.init_IRQ = ml300_init_irq;
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+ ppc_md.power_off = xilinx_power_off;
+#endif
+
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = ml300_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
new file mode 100644
index 0000000..f8c5884
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -0,0 +1,47 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml300.h
+ *
+ * Include file that defines the Xilinx ML300 evaluation board
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_XILINX_ML300_H__
+#define __ASM_XILINX_ML300_H__
+
+/* ML300 has a Xilinx Virtex-II Pro processor */
+#include <platforms/4xx/virtex-ii_pro.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct board_info {
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+#endif /* !__ASSEMBLY__ */
+
+/* We don't need anything mapped. Size of zero will accomplish that. */
+#define PPC4xx_ONB_IO_PADDR 0u
+#define PPC4xx_ONB_IO_VADDR 0u
+#define PPC4xx_ONB_IO_SIZE 0u
+
+#define PPC4xx_MACHINE_NAME "Xilinx ML300"
+
+#endif /* __ASM_XILINX_ML300_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
new file mode 100644
index 0000000..97e3f4d
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
@@ -0,0 +1,310 @@
+/*******************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* Description: Driver parameters
+*
+*******************************************************************/
+
+#define XPAR_XPCI_NUM_INSTANCES 1
+#define XPAR_XPCI_CLOCK_HZ 33333333
+#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
+#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
+#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
+#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
+#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
+#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
+#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
+#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
+#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
+#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+
+/******************************************************************/
+
+#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
+#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
+#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
+#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
+#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
+#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
+#define XPAR_XGPIO_NUM_INSTANCES 2
+
+/******************************************************************/
+
+#define XPAR_XIIC_NUM_INSTANCES 1
+#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
+#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
+#define XPAR_OPB_IIC_0_DEVICE_ID 0
+#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
+
+/******************************************************************/
+
+#define XPAR_XUARTNS550_NUM_INSTANCES 2
+#define XPAR_XUARTNS550_CLOCK_HZ 100000000
+#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
+#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
+#define XPAR_OPB_UART16550_0_DEVICE_ID 0
+#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
+#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
+#define XPAR_OPB_UART16550_1_DEVICE_ID 1
+
+/******************************************************************/
+
+#define XPAR_XSPI_NUM_INSTANCES 1
+#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
+#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
+#define XPAR_OPB_SPI_0_DEVICE_ID 0
+#define XPAR_OPB_SPI_0_FIFO_EXIST 1
+#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
+#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
+
+/******************************************************************/
+
+#define XPAR_XPS2_NUM_INSTANCES 2
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
+
+/******************************************************************/
+
+#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
+#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
+#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
+#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
+#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
+#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
+#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
+#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XINTC_HAS_IPR 1
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
+#define XPAR_XINTC_USE_DCR 0
+#define XPAR_XINTC_NUM_INSTANCES 1
+#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
+#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
+#define XPAR_DCR_INTC_0_DEVICE_ID 0
+#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
+
+/******************************************************************/
+
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
+#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
+#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
+#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
+#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
+#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
+#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
+#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
+#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
+#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
+#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
+#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
+#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
+#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
+#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
+#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
+
+/******************************************************************/
+
+#define XPAR_XTFT_NUM_INSTANCES 1
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
+#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XSYSACE_MEM_WIDTH 8
+#define XPAR_XSYSACE_NUM_INSTANCES 1
+#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
+#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
+#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
+#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
+
+/******************************************************************/
+
+#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
+
+/******************************************************************/
+
+/******************************************************************/
+
+/* Linux Redefines */
+
+/******************************************************************/
+
+#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
+#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
+#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
+#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
+#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_GPIO_0_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_0
+#define XPAR_GPIO_0_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_0
+#define XPAR_GPIO_0_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_0
+#define XPAR_GPIO_1_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_1
+#define XPAR_GPIO_1_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_1
+#define XPAR_GPIO_1_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_1
+
+/******************************************************************/
+
+#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
+#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
+#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
+#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
+#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
+#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_INTC_0_BASEADDR XPAR_DCR_INTC_0_BASEADDR
+#define XPAR_INTC_0_HIGHADDR XPAR_DCR_INTC_0_HIGHADDR
+#define XPAR_INTC_0_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
+#define XPAR_INTC_0_DEVICE_ID XPAR_DCR_INTC_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
+#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_UARTNS550_1_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
+#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
+#define XPAR_INTC_0_SPI_0_VEC_ID XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_TOUCHSCREEN_0_VEC_ID XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR
+#define XPAR_INTC_0_PCI_0_VEC_ID_A XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
+#define XPAR_INTC_0_PCI_0_VEC_ID_B XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
+#define XPAR_INTC_0_PCI_0_VEC_ID_C XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
+#define XPAR_INTC_0_PCI_0_VEC_ID_D XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
+
+/******************************************************************/
+
+#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
+#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
+#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
+#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
+#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
+#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_SPI_0_BASEADDR XPAR_OPB_SPI_0_BASEADDR
+#define XPAR_SPI_0_HIGHADDR XPAR_OPB_SPI_0_HIGHADDR
+#define XPAR_SPI_0_DEVICE_ID XPAR_OPB_SPI_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_TOUCHSCREEN_0_BASEADDR XPAR_OPB_TSD_REF_0_BASEADDR
+#define XPAR_TOUCHSCREEN_0_HIGHADDR XPAR_OPB_TSD_REF_0_HIGHADDR
+#define XPAR_TOUCHSCREEN_0_DEVICE_ID XPAR_OPB_TSD_REF_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
+
+/******************************************************************/
+
+#define XPAR_PCI_0_BASEADDR XPAR_OPB_PCI_REF_0_BASEADDR
+#define XPAR_PCI_0_HIGHADDR XPAR_OPB_PCI_REF_0_HIGHADDR
+#define XPAR_PCI_0_CONFIG_ADDR XPAR_OPB_PCI_REF_0_CONFIG_ADDR
+#define XPAR_PCI_0_CONFIG_DATA XPAR_OPB_PCI_REF_0_CONFIG_DATA
+#define XPAR_PCI_0_LCONFIG_ADDR XPAR_OPB_PCI_REF_0_LCONFIG_ADDR
+#define XPAR_PCI_0_MEM_BASEADDR XPAR_OPB_PCI_REF_0_MEM_BASEADDR
+#define XPAR_PCI_0_MEM_HIGHADDR XPAR_OPB_PCI_REF_0_MEM_HIGHADDR
+#define XPAR_PCI_0_IO_BASEADDR XPAR_OPB_PCI_REF_0_IO_BASEADDR
+#define XPAR_PCI_0_IO_HIGHADDR XPAR_OPB_PCI_REF_0_IO_HIGHADDR
+#define XPAR_PCI_0_CLOCK_FREQ_HZ XPAR_XPCI_CLOCK_HZ
+#define XPAR_PCI_0_DEVICE_ID XPAR_OPB_PCI_REF_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
+#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
+#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
+#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
+#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
+#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
+
+/******************************************************************/
+
+#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
+#define XPAR_DDR_0_SIZE 0x08000000
+
+/******************************************************************/
+
+#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
+#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
+#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
+
+/******************************************************************/
+
+#define XPAR_POWER_0_POWERDOWN_BASEADDR 0x90000004
+#define XPAR_POWER_0_POWERDOWN_HIGHADDR 0x90000007
+#define XPAR_POWER_0_POWERDOWN_VALUE 0xFF
+
+/******************************************************************/