Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
new file mode 100644
index 0000000..9c0582d
--- /dev/null
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -0,0 +1,473 @@
+/*
+ * arch/ppc/platforms/mpc8260_pci9.c
+ *
+ * Workaround for device erratum PCI 9.
+ * See Motorola's "XPC826xA Family Device Errata Reference."
+ * The erratum applies to all 8260 family Hip4 processors. It is scheduled
+ * to be fixed in HiP4 Rev C. Erratum PCI 9 states that a simultaneous PCI
+ * inbound write transaction and PCI outbound read transaction can result in a
+ * bus deadlock. The suggested workaround is to use the IDMA controller to
+ * perform all reads from PCI configuration, memory, and I/O space.
+ *
+ * Author: andy_lowe@mvista.com
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/byteorder.h>
+#include <asm/mpc8260.h>
+#include <asm/immap_cpm2.h>
+#include <asm/cpm2.h>
+
+#include "m8260_pci.h"
+
+#ifdef CONFIG_8260_PCI9
+/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
+
+#define IDMA_XFER_BUF_SIZE 64 /* size of the IDMA transfer buffer */
+
+/* define a structure for the IDMA dpram usage */
+typedef struct idma_dpram_s {
+ idma_t pram; /* IDMA parameter RAM */
+ u_char xfer_buf[IDMA_XFER_BUF_SIZE]; /* IDMA transfer buffer */
+ idma_bd_t bd; /* buffer descriptor */
+} idma_dpram_t;
+
+/* define offsets relative to start of IDMA dpram */
+#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
+#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
+
+/* define globals */
+static volatile idma_dpram_t *idma_dpram;
+
+/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined,
+ * where n is 1, 2, 3, or 4. This selects the IDMA channel used for
+ * the PCI9 workaround.
+ */
+#ifdef CONFIG_8260_PCI9_IDMA1
+#define IDMA_CHAN 0
+#define PROFF_IDMA PROFF_IDMA1_BASE
+#define IDMA_PAGE CPM_CR_IDMA1_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA2
+#define IDMA_CHAN 1
+#define PROFF_IDMA PROFF_IDMA2_BASE
+#define IDMA_PAGE CPM_CR_IDMA2_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA3
+#define IDMA_CHAN 2
+#define PROFF_IDMA PROFF_IDMA3_BASE
+#define IDMA_PAGE CPM_CR_IDMA3_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA4
+#define IDMA_CHAN 3
+#define PROFF_IDMA PROFF_IDMA4_BASE
+#define IDMA_PAGE CPM_CR_IDMA4_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
+#endif
+
+void idma_pci9_init(void)
+{
+ uint dpram_offset;
+ volatile idma_t *pram;
+ volatile im_idma_t *idma_reg;
+ volatile cpm2_map_t *immap = cpm2_immr;
+
+ /* allocate IDMA dpram */
+ dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
+ idma_dpram = cpm_dpram_addr(dpram_offset);
+
+ /* initialize the IDMA parameter RAM */
+ memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
+ pram = &idma_dpram->pram;
+ pram->ibase = dpram_offset + IDMA_BD_OFFSET;
+ pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
+ pram->ss_max = 32;
+ pram->dts = 32;
+
+ /* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
+ *((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
+
+ /* initialize the IDMA registers */
+ idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
+ idma_reg[IDMA_CHAN].idmr = 0; /* mask all IDMA interrupts */
+ idma_reg[IDMA_CHAN].idsr = 0xff; /* clear all event flags */
+
+ printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
+ IDMA_CHAN + 1);
+
+ return;
+}
+
+/* Use the IDMA controller to transfer data from I/O memory to local RAM.
+ * The src address must be a physical address suitable for use by the DMA
+ * controller with no translation. The dst address must be a kernel virtual
+ * address. The dst address is translated to a physical address via
+ * virt_to_phys().
+ * The sinc argument specifies whether or not the source address is incremented
+ * by the DMA controller. The source address is incremented if and only if sinc
+ * is non-zero. The destination address is always incremented since the
+ * destination is always host RAM.
+ */
+static void
+idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
+{
+ unsigned long flags;
+ volatile idma_t *pram = &idma_dpram->pram;
+ volatile idma_bd_t *bd = &idma_dpram->bd;
+ volatile cpm2_map_t *immap = cpm2_immr;
+
+ local_irq_save(flags);
+
+ /* initialize IDMA parameter RAM for this transfer */
+ if (sinc)
+ pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
+ | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
+ else
+ pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC
+ | IDMA_DCM_SD_MEM2MEM;
+ pram->ibdptr = pram->ibase;
+ pram->sts = unit_size;
+ pram->istate = 0;
+
+ /* initialize the buffer descriptor */
+ bd->dst = virt_to_phys(dst);
+ bd->src = (uint) src;
+ bd->len = bytes;
+ bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
+ | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
+
+ /* issue the START_IDMA command to the CP */
+ while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+ immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
+ CPM_CR_START_IDMA) | CPM_CR_FLG;
+ while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /* wait for transfer to complete */
+ while(bd->flags & IDMA_BD_V);
+
+ local_irq_restore(flags);
+
+ return;
+}
+
+/* Use the IDMA controller to transfer data from I/O memory to local RAM.
+ * The dst address must be a physical address suitable for use by the DMA
+ * controller with no translation. The src address must be a kernel virtual
+ * address. The src address is translated to a physical address via
+ * virt_to_phys().
+ * The dinc argument specifies whether or not the dest address is incremented
+ * by the DMA controller. The source address is incremented if and only if sinc
+ * is non-zero. The source address is always incremented since the
+ * source is always host RAM.
+ */
+static void
+idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
+{
+ unsigned long flags;
+ volatile idma_t *pram = &idma_dpram->pram;
+ volatile idma_bd_t *bd = &idma_dpram->bd;
+ volatile cpm2_map_t *immap = cpm2_immr;
+
+ local_irq_save(flags);
+
+ /* initialize IDMA parameter RAM for this transfer */
+ if (dinc)
+ pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
+ | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
+ else
+ pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
+ | IDMA_DCM_SD_MEM2MEM;
+ pram->ibdptr = pram->ibase;
+ pram->sts = unit_size;
+ pram->istate = 0;
+
+ /* initialize the buffer descriptor */
+ bd->dst = (uint) dst;
+ bd->src = virt_to_phys(src);
+ bd->len = bytes;
+ bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
+ | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
+
+ /* issue the START_IDMA command to the CP */
+ while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+ immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
+ CPM_CR_START_IDMA) | CPM_CR_FLG;
+ while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /* wait for transfer to complete */
+ while(bd->flags & IDMA_BD_V);
+
+ local_irq_restore(flags);
+
+ return;
+}
+
+/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
+ * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
+ * the unit_size is 4.
+ */
+static void
+idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
+{
+ int i;
+ u8 *p;
+
+ idma_pci9_read(dst, src, bytes, unit_size, sinc);
+ switch(unit_size) {
+ case 2:
+ for (i = 0, p = dst; i < bytes; i += 2, p += 2)
+ swab16s((u16 *) p);
+ break;
+ case 4:
+ for (i = 0, p = dst; i < bytes; i += 4, p += 4)
+ swab32s((u32 *) p);
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL(idma_pci9_init);
+EXPORT_SYMBOL(idma_pci9_read);
+EXPORT_SYMBOL(idma_pci9_read_le);
+
+static inline int is_pci_mem(unsigned long addr)
+{
+ if (addr >= MPC826x_PCI_LOWER_MMIO &&
+ addr <= MPC826x_PCI_UPPER_MMIO)
+ return 1;
+ if (addr >= MPC826x_PCI_LOWER_MEM &&
+ addr <= MPC826x_PCI_UPPER_MEM)
+ return 1;
+ return 0;
+}
+
+#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
+int readb(volatile unsigned char *addr)
+{
+ u8 val;
+ unsigned long pa = iopa((unsigned long) addr);
+
+ if (!is_pci_mem(pa))
+ return in_8(addr);
+
+ idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+ return val;
+}
+
+int readw(volatile unsigned short *addr)
+{
+ u16 val;
+ unsigned long pa = iopa((unsigned long) addr);
+
+ if (!is_pci_mem(pa))
+ return in_le16(addr);
+
+ idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+ return swab16(val);
+}
+
+unsigned readl(volatile unsigned *addr)
+{
+ u32 val;
+ unsigned long pa = iopa((unsigned long) addr);
+
+ if (!is_pci_mem(pa))
+ return in_le32(addr);
+
+ idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+ return swab32(val);
+}
+
+int inb(unsigned port)
+{
+ u8 val;
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+ return val;
+}
+
+int inw(unsigned port)
+{
+ u16 val;
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+ return swab16(val);
+}
+
+unsigned inl(unsigned port)
+{
+ u32 val;
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+ return swab32(val);
+}
+
+void insb(unsigned port, void *buf, int ns)
+{
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
+}
+
+void insw(unsigned port, void *buf, int ns)
+{
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
+}
+
+void insl(unsigned port, void *buf, int nl)
+{
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
+}
+
+void insw_ns(unsigned port, void *buf, int ns)
+{
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
+}
+
+void insl_ns(unsigned port, void *buf, int nl)
+{
+ u8 *addr = (u8 *)(port + _IO_BASE);
+
+ idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
+}
+
+void *memcpy_fromio(void *dest, unsigned long src, size_t count)
+{
+ unsigned long pa = iopa((unsigned long) src);
+
+ if (is_pci_mem(pa))
+ idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
+ else
+ memcpy(dest, (void *)src, count);
+ return dest;
+}
+
+EXPORT_SYMBOL(readb);
+EXPORT_SYMBOL(readw);
+EXPORT_SYMBOL(readl);
+EXPORT_SYMBOL(inb);
+EXPORT_SYMBOL(inw);
+EXPORT_SYMBOL(inl);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(insw_ns);
+EXPORT_SYMBOL(insl_ns);
+EXPORT_SYMBOL(memcpy_fromio);
+
+#endif /* ifdef CONFIG_8260_PCI9 */
+
+/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
+ * Copyright (C) 1998 Gabriel Paubert.
+ */
+#ifndef CONFIG_8260_PCI9
+#define cfg_read(val, addr, type, op) *val = op((type)(addr))
+#else
+#define cfg_read(val, addr, type, op) \
+ idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
+#endif
+
+#define cfg_write(val, addr, type, op) op((type *)(addr), (val))
+
+static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ struct pci_controller *hose = pbus->sysdata;
+ u8 cfg_type = 0;
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(pbus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (hose->set_cfg_type)
+ if (pbus->number != hose->first_busno)
+ cfg_type = 1;
+
+ out_be32(hose->cfg_addr,
+ (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
+ | ((pbus->number - hose->bus_offset) << 8) | 0x80);
+
+ switch (size)
+ {
+ case 1:
+ cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
+ break;
+ case 2:
+ cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
+ break;
+ case 4:
+ cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ struct pci_controller *hose = pbus->sysdata;
+ u8 cfg_type = 0;
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(pbus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (hose->set_cfg_type)
+ if (pbus->number != hose->first_busno)
+ cfg_type = 1;
+
+ out_be32(hose->cfg_addr,
+ (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
+ | ((pbus->number - hose->bus_offset) << 8) | 0x80);
+
+ switch (size)
+ {
+ case 1:
+ cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
+ break;
+ case 2:
+ cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
+ break;
+ case 4:
+ cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops =
+{
+ .read = indirect_read_config,
+ .write = indirect_write_config,
+};
+
+void
+setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+ hose->ops = &indirect_pci_ops;
+ hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
+ hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
+}