Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
new file mode 100644
index 0000000..76eb81f
--- /dev/null
+++ b/arch/sh64/Kconfig
@@ -0,0 +1,293 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+#
+
+mainmenu "Linux/SH64 Kernel Configuration"
+
+config SUPERH
+ bool
+ default y
+
+config SUPERH64
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config LOG_BUF_SHIFT
+ int
+ default 14
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+source init/Kconfig
+
+menu "System type"
+
+choice
+ prompt "SuperH system type"
+ default SH_SIMULATOR
+
+config SH_GENERIC
+ bool "Generic"
+
+config SH_SIMULATOR
+ bool "Simulator"
+
+config SH_CAYMAN
+ bool "Cayman"
+
+config SH_ROMRAM
+ bool "ROM/RAM"
+
+config SH_HARP
+ bool "ST50-Harp"
+
+endchoice
+
+choice
+ prompt "Processor family"
+ default CPU_SH5
+
+config CPU_SH5
+ bool "SH-5"
+
+endchoice
+
+choice
+ prompt "Processor type"
+
+config CPU_SUBTYPE_SH5_101
+ bool "SH5-101"
+ depends on CPU_SH5
+
+config CPU_SUBTYPE_SH5_103
+ bool "SH5-103"
+ depends on CPU_SH5
+
+endchoice
+
+choice
+ prompt "Endianness"
+ default LITTLE_ENDIAN
+
+config LITTLE_ENDIAN
+ bool "Little-Endian"
+
+config BIG_ENDIAN
+ bool "Big-Endian"
+
+endchoice
+
+config SH_FPU
+ bool "FPU support"
+ default y
+
+config SH64_FPU_DENORM_FLUSH
+ depends on SH_FPU
+ bool "Flush floating point denorms to zero"
+
+choice
+ prompt "Page table levels"
+ default SH64_PGTABLE_2_LEVEL
+
+config SH64_PGTABLE_2_LEVEL
+ bool "2"
+
+config SH64_PGTABLE_3_LEVEL
+ bool "3"
+
+endchoice
+
+choice
+ prompt "HugeTLB page size"
+ depends on HUGETLB_PAGE && MMU
+ default HUGETLB_PAGE_SIZE_64K
+
+config HUGETLB_PAGE_SIZE_64K
+ bool "64K"
+
+config HUGETLB_PAGE_SIZE_1MB
+ bool "1MB"
+
+config HUGETLB_PAGE_SIZE_512MB
+ bool "512MB"
+
+endchoice
+
+config SH64_USER_MISALIGNED_FIXUP
+ bool "Fixup misaligned loads/stores occurring in user mode"
+
+comment "Memory options"
+
+config CACHED_MEMORY_OFFSET
+ hex "Cached Area Offset"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "20000000"
+
+config MEMORY_START
+ hex "Physical memory start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "80000000"
+
+config MEMORY_SIZE_IN_MB
+ int "Memory size (in MB)" if SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "64" if SH_HARP || SH_CAYMAN
+ default "8" if SH_SIMULATOR
+
+comment "Cache options"
+
+config DCACHE_DISABLED
+ bool "DCache Disabling"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+
+choice
+ prompt "DCache mode"
+ depends on !DCACHE_DISABLED && !SH_SIMULATOR
+ default DCACHE_WRITE_BACK
+
+config DCACHE_WRITE_BACK
+ bool "Write-back"
+
+config DCACHE_WRITE_THROUGH
+ bool "Write-through"
+
+endchoice
+
+config ICACHE_DISABLED
+ bool "ICache Disabling"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+
+config PCIDEVICE_MEMORY_START
+ hex
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "C0000000"
+
+config DEVICE_MEMORY_START
+ hex
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "E0000000"
+
+config FLASH_MEMORY_START
+ hex "Flash memory/on-chip devices start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "00000000"
+
+config PCI_BLOCK_START
+ hex "PCI block start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "40000000"
+
+comment "CPU Subtype specific options"
+
+config SH64_ID2815_WORKAROUND
+ bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
+
+comment "Misc options"
+config HEARTBEAT
+ bool "Heartbeat LED"
+
+config HDSP253_LED
+ bool "Support for HDSP-253 LED"
+ depends on SH_CAYMAN
+
+config SH_DMA
+ tristate "DMA controller (DMAC) support"
+
+config PREEMPT
+ bool "Preemptible Kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+
+endmenu
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config ISA
+ bool
+
+config SBUS
+ bool
+
+config PCI
+ bool "PCI support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config SH_PCIDMA_NONCOHERENT
+ bool "Cache and PCI noncoherent"
+ depends on PCI
+ default y
+ help
+ Enable this option if your platform does not have a CPU cache which
+ remains coherent with PCI DMA. It is safest to say 'Y', although you
+ will see better performance if you can say 'N', because the PCI DMA
+ code will not have to flush the CPU's caches. If you have a PCI host
+ bridge integrated with your SH CPU, refer carefully to the chip specs
+ to see if you can say 'N' here. Otherwise, leave it as 'Y'.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/sh64/oprofile/Kconfig"
+
+source "arch/sh64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+