Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
new file mode 100644
index 0000000..0379bc1
--- /dev/null
+++ b/drivers/input/joystick/twidjoy.c
@@ -0,0 +1,296 @@
+/*
+ * $Id: twidjoy.c,v 1.5 2002/01/22 20:31:53 vojtech Exp $
+ *
+ * derived from CVS-ID "stinger.c,v 1.5 2001/05/29 12:57:18 vojtech Exp"
+ *
+ * Copyright (c) 2001 Arndt Schoenewald
+ * Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2000 Mark Fletcher
+ *
+ * Sponsored by Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
+ */
+
+/*
+ * Driver to use Handykey's Twiddler (the first edition, i.e. the one with
+ * the RS232 interface) as a joystick under Linux
+ *
+ * The Twiddler is a one-handed chording keyboard featuring twelve buttons on
+ * the front, six buttons on the top, and a built-in tilt sensor. The buttons
+ * on the front, which are grouped as four rows of three buttons, are pressed
+ * by the four fingers (this implies only one button per row can be held down
+ * at the same time) and the buttons on the top are for the thumb. The tilt
+ * sensor delivers X and Y axis data depending on how the Twiddler is held.
+ * Additional information can be found at http://www.handykey.com.
+ *
+ * This driver does not use the Twiddler for its intended purpose, i.e. as
+ * a chording keyboard, but as a joystick: pressing and releasing a button
+ * immediately sends a corresponding button event, and tilting it generates
+ * corresponding ABS_X and ABS_Y events. This turns the Twiddler into a game
+ * controller with amazing 18 buttons :-)
+ *
+ * Note: The Twiddler2 (the successor of the Twiddler that connects directly
+ * to the PS/2 keyboard and mouse ports) is NOT supported by this driver!
+ *
+ * For questions or feedback regarding this driver module please contact:
+ * Arndt Schoenewald <arndt@quelltext.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC "Handykey Twiddler keyboard as a joystick driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Constants.
+ */
+
+#define TWIDJOY_MAX_LENGTH 5
+
+static char *twidjoy_name = "Handykey Twiddler";
+
+static struct twidjoy_button_spec {
+ int bitshift;
+ int bitmask;
+ int buttons[3];
+}
+twidjoy_buttons[] = {
+ { 0, 3, { BTN_A, BTN_B, BTN_C } },
+ { 2, 3, { BTN_X, BTN_Y, BTN_Z } },
+ { 4, 3, { BTN_TL, BTN_TR, BTN_TR2 } },
+ { 6, 3, { BTN_SELECT, BTN_START, BTN_MODE } },
+ { 8, 1, { BTN_BASE5 } },
+ { 9, 1, { BTN_BASE } },
+ { 10, 1, { BTN_BASE3 } },
+ { 11, 1, { BTN_BASE4 } },
+ { 12, 1, { BTN_BASE2 } },
+ { 13, 1, { BTN_BASE6 } },
+ { 0, 0, { 0 } }
+};
+
+/*
+ * Per-Twiddler data.
+ */
+
+struct twidjoy {
+ struct input_dev dev;
+ int idx;
+ unsigned char data[TWIDJOY_MAX_LENGTH];
+ char phys[32];
+};
+
+/*
+ * twidjoy_process_packet() decodes packets the driver receives from the
+ * Twiddler. It updates the data accordingly.
+ */
+
+static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs)
+{
+ if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
+ struct input_dev *dev = &twidjoy->dev;
+ unsigned char *data = twidjoy->data;
+ struct twidjoy_button_spec *bp;
+ int button_bits, abs_x, abs_y;
+
+ button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
+
+ input_regs(dev, regs);
+
+ for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
+ int i;
+
+ for (i = 0; i < bp->bitmask; i++)
+ input_report_key(dev, bp->buttons[i], i+1 == value);
+ }
+
+ abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
+ if (data[4] & 0x08) abs_x -= 256;
+
+ abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
+ if (data[3] & 0x02) abs_y -= 256;
+
+ input_report_abs(dev, ABS_X, -abs_x);
+ input_report_abs(dev, ABS_Y, +abs_y);
+
+ input_sync(dev);
+ }
+
+ return;
+}
+
+/*
+ * twidjoy_interrupt() is called by the low level driver when characters
+ * are ready for us. We then buffer them for further processing, or call the
+ * packet processing routine.
+ */
+
+static irqreturn_t twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+ struct twidjoy *twidjoy = serio_get_drvdata(serio);
+
+ /* All Twiddler packets are 5 bytes. The fact that the first byte
+ * has a MSB of 0 and all other bytes have a MSB of 1 can be used
+ * to check and regain sync. */
+
+ if ((data & 0x80) == 0)
+ twidjoy->idx = 0; /* this byte starts a new packet */
+ else if (twidjoy->idx == 0)
+ return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
+
+ if (twidjoy->idx < TWIDJOY_MAX_LENGTH)
+ twidjoy->data[twidjoy->idx++] = data;
+
+ if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
+ twidjoy_process_packet(twidjoy, regs);
+ twidjoy->idx = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * twidjoy_disconnect() is the opposite of twidjoy_connect()
+ */
+
+static void twidjoy_disconnect(struct serio *serio)
+{
+ struct twidjoy *twidjoy = serio_get_drvdata(serio);
+
+ input_unregister_device(&twidjoy->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(twidjoy);
+}
+
+/*
+ * twidjoy_connect() is the routine that is called when someone adds a
+ * new serio device. It looks for the Twiddler, and if found, registers
+ * it as an input device.
+ */
+
+static int twidjoy_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct twidjoy_button_spec *bp;
+ struct twidjoy *twidjoy;
+ int i;
+ int err;
+
+ if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL)))
+ return -ENOMEM;
+
+ memset(twidjoy, 0, sizeof(struct twidjoy));
+
+ sprintf(twidjoy->phys, "%s/input0", serio->phys);
+
+ init_input_dev(&twidjoy->dev);
+ twidjoy->dev.name = twidjoy_name;
+ twidjoy->dev.phys = twidjoy->phys;
+ twidjoy->dev.id.bustype = BUS_RS232;
+ twidjoy->dev.id.vendor = SERIO_TWIDJOY;
+ twidjoy->dev.id.product = 0x0001;
+ twidjoy->dev.id.version = 0x0100;
+ twidjoy->dev.dev = &serio->dev;
+
+ twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ for (i = 0; i < bp->bitmask; i++)
+ set_bit(bp->buttons[i], twidjoy->dev.keybit);
+ }
+
+ twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+
+ for (i = 0; i < 2; i++) {
+ twidjoy->dev.absmax[ABS_X+i] = 50;
+ twidjoy->dev.absmin[ABS_X+i] = -50;
+
+ /* TODO: arndt 20010708: Are these values appropriate? */
+ twidjoy->dev.absfuzz[ABS_X+i] = 4;
+ twidjoy->dev.absflat[ABS_X+i] = 4;
+ }
+
+ twidjoy->dev.private = twidjoy;
+
+ serio_set_drvdata(serio, twidjoy);
+
+ err = serio_open(serio, drv);
+ if (err) {
+ serio_set_drvdata(serio, NULL);
+ kfree(twidjoy);
+ return err;
+ }
+
+ input_register_device(&twidjoy->dev);
+
+ printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys);
+
+ return 0;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id twidjoy_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_TWIDJOY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, twidjoy_serio_ids);
+
+static struct serio_driver twidjoy_drv = {
+ .driver = {
+ .name = "twidjoy",
+ },
+ .description = DRIVER_DESC,
+ .id_table = twidjoy_serio_ids,
+ .interrupt = twidjoy_interrupt,
+ .connect = twidjoy_connect,
+ .disconnect = twidjoy_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+int __init twidjoy_init(void)
+{
+ serio_register_driver(&twidjoy_drv);
+ return 0;
+}
+
+void __exit twidjoy_exit(void)
+{
+ serio_unregister_driver(&twidjoy_drv);
+}
+
+module_init(twidjoy_init);
+module_exit(twidjoy_exit);