Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h
new file mode 100644
index 0000000..dc98d46
--- /dev/null
+++ b/drivers/message/fusion/lsi/fc_log.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
+ *
+ * NAME: fc_log.h
+ * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
+ * DESCRIPTION: Contains the enumerated list of values that may be returned
+ * in the IOCLogInfo field of a MPI Default Reply Message.
+ *
+ * CREATION DATE: 6/02/2000
+ * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
+ */
+
+
+/*
+ * MpiIocLogInfo_t enum
+ *
+ * These 32 bit values are used in the IOCLogInfo field of the MPI reply
+ * messages.
+ * The value is 0xabcccccc where
+ * a = The type of log info as per the MPI spec. Since these codes are
+ * all for Fibre Channel this value will always be 2.
+ * b = Specifies a subclass of the firmware where
+ * 0 = FCP Initiator
+ * 1 = FCP Target
+ * 2 = LAN
+ * 3 = MPI Message Layer
+ * 4 = FC Link
+ * 5 = Context Manager
+ * 6 = Invalid Field Offset
+ * 7 = State Change Info
+ * all others are reserved for future use
+ * c = A specific value within the subclass.
+ *
+ * NOTE: Any new values should be added to the end of each subclass so that the
+ * codes remain consistent across firmware releases.
+ */
+typedef enum _MpiIocLogInfoFc
+{
+ MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
+ MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */
+
+ MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000,
+ MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
+ MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */
+ MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */
+ MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */
+ MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */
+ MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */
+ MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */
+ MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */
+
+ MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000,
+ MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */
+ MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */
+ MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */
+ MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */
+
+ MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000,
+
+ MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000,
+ MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */
+ MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */
+ MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
+ MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */
+
+ MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000,
+
+ MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
+ MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff,
+
+ MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */
+
+} MpiIocLogInfoFc_t;
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
new file mode 100644
index 0000000..9dbb061
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -0,0 +1,746 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi.h
+ * Title: MPI Message independent structures and definitions
+ * Creation Date: July 27, 2000
+ *
+ * mpi.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
+ * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
+ * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions.
+ * Removed LAN_SUSPEND function definition.
+ * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
+ * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
+ * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
+ * 07-27-00 01.00.04 Added MPI_FAULT_ definitions.
+ * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
+ * Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
+ * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
+ * 11-02-00 01.01.01 Original release for post 1.0 work.
+ * 12-04-00 01.01.02 Added new function codes.
+ * 01-09-01 01.01.03 Added more definitions to the system interface section
+ * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
+ * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01.
+ * 02-20-01 01.01.05 Started using MPI_POINTER.
+ * Fixed value for MPI_DIAG_RW_ENABLE.
+ * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
+ * MPI_DIAG_CLEAR_FLASH_BAD_SIG.
+ * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
+ * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define.
+ * Added function codes for RAID.
+ * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE,
+ * MPI_DOORBELL_USED, to better match the spec.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * Changed MPI_VERSION_MINOR from 0x01 to 0x02.
+ * Added define MPI_FUNCTION_TOOLBOX.
+ * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR.
+ * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR.
+ * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines.
+ * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT.
+ * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX.
+ * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT.
+ * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and
+ * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
+ * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
+ * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_H
+#define MPI_H
+
+
+/*****************************************************************************
+*
+* M P I V e r s i o n D e f i n i t i o n s
+*
+*****************************************************************************/
+
+#define MPI_VERSION_MAJOR (0x01)
+#define MPI_VERSION_MINOR (0x05)
+#define MPI_VERSION_MAJOR_MASK (0xFF00)
+#define MPI_VERSION_MAJOR_SHIFT (8)
+#define MPI_VERSION_MINOR_MASK (0x00FF)
+#define MPI_VERSION_MINOR_SHIFT (0)
+#define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) | \
+ MPI_VERSION_MINOR)
+
+#define MPI_VERSION_01_00 (0x0100)
+#define MPI_VERSION_01_01 (0x0101)
+#define MPI_VERSION_01_02 (0x0102)
+#define MPI_VERSION_01_03 (0x0103)
+#define MPI_VERSION_01_05 (0x0105)
+/* Note: The major versions of 0xe0 through 0xff are reserved */
+
+/* versioning for this MPI header set */
+#define MPI_HEADER_VERSION_UNIT (0x00)
+#define MPI_HEADER_VERSION_DEV (0x00)
+#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
+#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
+#define MPI_HEADER_VERSION_DEV_MASK (0x00FF)
+#define MPI_HEADER_VERSION_DEV_SHIFT (0)
+#define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV)
+
+/*****************************************************************************
+*
+* I O C S t a t e D e f i n i t i o n s
+*
+*****************************************************************************/
+
+#define MPI_IOC_STATE_RESET (0x00000000)
+#define MPI_IOC_STATE_READY (0x10000000)
+#define MPI_IOC_STATE_OPERATIONAL (0x20000000)
+#define MPI_IOC_STATE_FAULT (0x40000000)
+
+#define MPI_IOC_STATE_MASK (0xF0000000)
+#define MPI_IOC_STATE_SHIFT (28)
+
+/* Fault state codes (product independent range 0x8000-0xFFFF) */
+
+#define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111)
+#define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112)
+#define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113)
+#define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114)
+#define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115)
+#define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116)
+#define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117)
+#define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118)
+
+
+/*****************************************************************************
+*
+* P C I S y s t e m I n t e r f a c e R e g i s t e r s
+*
+*****************************************************************************/
+
+/* S y s t e m D o o r b e l l */
+#define MPI_DOORBELL_OFFSET (0x00000000)
+#define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */
+#define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE)
+#define MPI_DOORBELL_ACTIVE_SHIFT (27)
+#define MPI_DOORBELL_WHO_INIT_MASK (0x07000000)
+#define MPI_DOORBELL_WHO_INIT_SHIFT (24)
+#define MPI_DOORBELL_FUNCTION_MASK (0xFF000000)
+#define MPI_DOORBELL_FUNCTION_SHIFT (24)
+#define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
+#define MPI_DOORBELL_ADD_DWORDS_SHIFT (16)
+#define MPI_DOORBELL_DATA_MASK (0x0000FFFF)
+
+
+#define MPI_WRITE_SEQUENCE_OFFSET (0x00000004)
+#define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F)
+#define MPI_WRSEQ_1ST_KEY_VALUE (0x04)
+#define MPI_WRSEQ_2ND_KEY_VALUE (0x0B)
+#define MPI_WRSEQ_3RD_KEY_VALUE (0x02)
+#define MPI_WRSEQ_4TH_KEY_VALUE (0x07)
+#define MPI_WRSEQ_5TH_KEY_VALUE (0x0D)
+
+#define MPI_DIAGNOSTIC_OFFSET (0x00000008)
+#define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
+#define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200)
+#define MPI_DIAG_DRWE (0x00000080)
+#define MPI_DIAG_FLASH_BAD_SIG (0x00000040)
+#define MPI_DIAG_RESET_HISTORY (0x00000020)
+#define MPI_DIAG_RW_ENABLE (0x00000010)
+#define MPI_DIAG_RESET_ADAPTER (0x00000004)
+#define MPI_DIAG_DISABLE_ARM (0x00000002)
+#define MPI_DIAG_MEM_ENABLE (0x00000001)
+
+#define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C)
+
+#define MPI_DIAG_RW_DATA_OFFSET (0x00000010)
+
+#define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014)
+
+#define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
+#define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000)
+#define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008)
+#define MPI_HIS_DOORBELL_INTERRUPT (0x00000001)
+
+#define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
+#define MPI_HIM_RIM (0x00000008)
+#define MPI_HIM_DIM (0x00000001)
+
+#define MPI_REQUEST_QUEUE_OFFSET (0x00000040)
+#define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040)
+
+#define MPI_REPLY_QUEUE_OFFSET (0x00000044)
+#define MPI_REPLY_POST_FIFO_OFFSET (0x00000044)
+#define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044)
+
+#define MPI_HI_PRI_REQUEST_QUEUE_OFFSET (0x00000048)
+
+
+
+/*****************************************************************************
+*
+* M e s s a g e F r a m e D e s c r i p t o r s
+*
+*****************************************************************************/
+
+#define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003)
+#define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004)
+#define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8)
+
+#define MPI_ADDRESS_REPLY_A_BIT (0x80000000)
+#define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF)
+
+#define MPI_CONTEXT_REPLY_A_BIT (0x80000000)
+#define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000)
+#define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00)
+#define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01)
+#define MPI_CONTEXT_REPLY_TYPE_LAN (0x02)
+#define MPI_CONTEXT_REPLY_TYPE_SHIFT (29)
+#define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF)
+
+
+/****************************************************************************/
+/* Context Reply macros */
+/****************************************************************************/
+
+#define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \
+ >> MPI_CONTEXT_REPLY_TYPE_SHIFT)
+
+#define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \
+ ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \
+ (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \
+ MPI_CONTEXT_REPLY_TYPE_MASK))
+
+
+/*****************************************************************************
+*
+* M e s s a g e F u n c t i o n s
+* 0x80 -> 0x8F reserved for private message use per product
+*
+*
+*****************************************************************************/
+
+#define MPI_FUNCTION_SCSI_IO_REQUEST (0x00)
+#define MPI_FUNCTION_SCSI_TASK_MGMT (0x01)
+#define MPI_FUNCTION_IOC_INIT (0x02)
+#define MPI_FUNCTION_IOC_FACTS (0x03)
+#define MPI_FUNCTION_CONFIG (0x04)
+#define MPI_FUNCTION_PORT_FACTS (0x05)
+#define MPI_FUNCTION_PORT_ENABLE (0x06)
+#define MPI_FUNCTION_EVENT_NOTIFICATION (0x07)
+#define MPI_FUNCTION_EVENT_ACK (0x08)
+#define MPI_FUNCTION_FW_DOWNLOAD (0x09)
+#define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A)
+#define MPI_FUNCTION_TARGET_ASSIST (0x0B)
+#define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C)
+#define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D)
+#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E)
+#define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F)
+#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10)
+#define MPI_FUNCTION_FC_ABORT (0x11)
+#define MPI_FUNCTION_FW_UPLOAD (0x12)
+#define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13)
+#define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14)
+
+#define MPI_FUNCTION_RAID_ACTION (0x15)
+#define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16)
+
+#define MPI_FUNCTION_TOOLBOX (0x17)
+
+#define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18)
+
+#define MPI_FUNCTION_MAILBOX (0x19)
+
+#define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A)
+#define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
+
+#define MPI_DIAG_BUFFER_POST (0x1D)
+#define MPI_DIAG_RELEASE (0x1E)
+
+#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
+
+#define MPI_FUNCTION_LAN_SEND (0x20)
+#define MPI_FUNCTION_LAN_RECEIVE (0x21)
+#define MPI_FUNCTION_LAN_RESET (0x22)
+
+#define MPI_FUNCTION_INBAND_BUFFER_POST (0x28)
+#define MPI_FUNCTION_INBAND_SEND (0x29)
+#define MPI_FUNCTION_INBAND_RSP (0x2A)
+#define MPI_FUNCTION_INBAND_ABORT (0x2B)
+
+#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
+#define MPI_FUNCTION_IO_UNIT_RESET (0x41)
+#define MPI_FUNCTION_HANDSHAKE (0x42)
+#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43)
+
+
+/* standard version format */
+typedef struct _MPI_VERSION_STRUCT
+{
+ U8 Dev; /* 00h */
+ U8 Unit; /* 01h */
+ U8 Minor; /* 02h */
+ U8 Major; /* 03h */
+} MPI_VERSION_STRUCT, MPI_POINTER PTR_MPI_VERSION_STRUCT,
+ MpiVersionStruct_t, MPI_POINTER pMpiVersionStruct;
+
+typedef union _MPI_VERSION_FORMAT
+{
+ MPI_VERSION_STRUCT Struct;
+ U32 Word;
+} MPI_VERSION_FORMAT, MPI_POINTER PTR_MPI_VERSION_FORMAT,
+ MpiVersionFormat_t, MPI_POINTER pMpiVersionFormat_t;
+
+
+/*****************************************************************************
+*
+* S c a t t e r G a t h e r E l e m e n t s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Simple element structures */
+/****************************************************************************/
+
+typedef struct _SGE_SIMPLE32
+{
+ U32 FlagsLength;
+ U32 Address;
+} SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32,
+ SGESimple32_t, MPI_POINTER pSGESimple32_t;
+
+typedef struct _SGE_SIMPLE64
+{
+ U32 FlagsLength;
+ U64 Address;
+} SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64,
+ SGESimple64_t, MPI_POINTER pSGESimple64_t;
+
+typedef struct _SGE_SIMPLE_UNION
+{
+ U32 FlagsLength;
+ union
+ {
+ U32 Address32;
+ U64 Address64;
+ }u;
+} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t,
+ SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION;
+
+/****************************************************************************/
+/* Chain element structures */
+/****************************************************************************/
+
+typedef struct _SGE_CHAIN32
+{
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ U32 Address;
+} SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32,
+ SGEChain32_t, MPI_POINTER pSGEChain32_t;
+
+typedef struct _SGE_CHAIN64
+{
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ U64 Address;
+} SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64,
+ SGEChain64_t, MPI_POINTER pSGEChain64_t;
+
+typedef struct _SGE_CHAIN_UNION
+{
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ union
+ {
+ U32 Address32;
+ U64 Address64;
+ }u;
+} SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION,
+ SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t;
+
+/****************************************************************************/
+/* Transaction Context element */
+/****************************************************************************/
+
+typedef struct _SGE_TRANSACTION32
+{
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[1];
+ U32 TransactionDetails[1];
+} SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32,
+ SGETransaction32_t, MPI_POINTER pSGETransaction32_t;
+
+typedef struct _SGE_TRANSACTION64
+{
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[2];
+ U32 TransactionDetails[1];
+} SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64,
+ SGETransaction64_t, MPI_POINTER pSGETransaction64_t;
+
+typedef struct _SGE_TRANSACTION96
+{
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[3];
+ U32 TransactionDetails[1];
+} SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96,
+ SGETransaction96_t, MPI_POINTER pSGETransaction96_t;
+
+typedef struct _SGE_TRANSACTION128
+{
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[4];
+ U32 TransactionDetails[1];
+} SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128,
+ SGETransaction_t128, MPI_POINTER pSGETransaction_t128;
+
+typedef struct _SGE_TRANSACTION_UNION
+{
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ union
+ {
+ U32 TransactionContext32[1];
+ U32 TransactionContext64[2];
+ U32 TransactionContext96[3];
+ U32 TransactionContext128[4];
+ }u;
+ U32 TransactionDetails[1];
+} SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION,
+ SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t;
+
+
+/****************************************************************************/
+/* SGE IO types union for IO SGL's */
+/****************************************************************************/
+
+typedef struct _SGE_IO_UNION
+{
+ union
+ {
+ SGE_SIMPLE_UNION Simple;
+ SGE_CHAIN_UNION Chain;
+ } u;
+} SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION,
+ SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t;
+
+/****************************************************************************/
+/* SGE union for SGL's with Simple and Transaction elements */
+/****************************************************************************/
+
+typedef struct _SGE_TRANS_SIMPLE_UNION
+{
+ union
+ {
+ SGE_SIMPLE_UNION Simple;
+ SGE_TRANSACTION_UNION Transaction;
+ } u;
+} SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION,
+ SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t;
+
+/****************************************************************************/
+/* All SGE types union */
+/****************************************************************************/
+
+typedef struct _SGE_MPI_UNION
+{
+ union
+ {
+ SGE_SIMPLE_UNION Simple;
+ SGE_CHAIN_UNION Chain;
+ SGE_TRANSACTION_UNION Transaction;
+ } u;
+} SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION,
+ MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t,
+ SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t;
+
+
+/****************************************************************************/
+/* SGE field definition and masks */
+/****************************************************************************/
+
+/* Flags field bit definitions */
+
+#define MPI_SGE_FLAGS_LAST_ELEMENT (0x80)
+#define MPI_SGE_FLAGS_END_OF_BUFFER (0x40)
+#define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
+#define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08)
+#define MPI_SGE_FLAGS_DIRECTION (0x04)
+#define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02)
+#define MPI_SGE_FLAGS_END_OF_LIST (0x01)
+
+#define MPI_SGE_FLAGS_SHIFT (24)
+
+#define MPI_SGE_LENGTH_MASK (0x00FFFFFF)
+#define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
+
+/* Element Type */
+
+#define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
+#define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
+#define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30)
+#define MPI_SGE_FLAGS_ELEMENT_MASK (0x30)
+
+/* Address location */
+
+#define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
+
+/* Direction */
+
+#define MPI_SGE_FLAGS_IOC_TO_HOST (0x00)
+#define MPI_SGE_FLAGS_HOST_TO_IOC (0x04)
+
+/* Address Size */
+
+#define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
+#define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
+
+/* Context Size */
+
+#define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00)
+#define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02)
+#define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04)
+#define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06)
+
+#define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
+#define MPI_SGE_CHAIN_OFFSET_SHIFT (16)
+
+
+/****************************************************************************/
+/* SGE operation Macros */
+/****************************************************************************/
+
+ /* SIMPLE FlagsLength manipulations... */
+#define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT)
+#define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT)
+#define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK)
+#define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK)
+
+#define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l))
+
+#define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength)
+#define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l)
+ /* CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f)
+#define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l)
+
+#define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT)
+
+
+
+/*****************************************************************************
+*
+* S t a n d a r d M e s s a g e S t r u c t u r e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Standard message request header for all request messages */
+/****************************************************************************/
+
+typedef struct _MSG_REQUEST_HEADER
+{
+ U8 Reserved[2]; /* function specific */
+ U8 ChainOffset;
+ U8 Function;
+ U8 Reserved1[3]; /* function specific */
+ U8 MsgFlags;
+ U32 MsgContext;
+} MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER,
+ MPIHeader_t, MPI_POINTER pMPIHeader_t;
+
+
+/****************************************************************************/
+/* Default Reply */
+/****************************************************************************/
+
+typedef struct _MSG_DEFAULT_REPLY
+{
+ U8 Reserved[2]; /* function specific */
+ U8 MsgLength;
+ U8 Function;
+ U8 Reserved1[3]; /* function specific */
+ U8 MsgFlags;
+ U32 MsgContext;
+ U8 Reserved2[2]; /* function specific */
+ U16 IOCStatus;
+ U32 IOCLogInfo;
+} MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY,
+ MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t;
+
+
+/* MsgFlags definition for all replies */
+
+#define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80)
+
+
+/*****************************************************************************
+*
+* I O C S t a t u s V a l u e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Common IOCStatus values for all replies */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_SUCCESS (0x0000)
+#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI_IOCSTATUS_BUSY (0x0002)
+#define MPI_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI_IOCSTATUS_RESERVED (0x0005)
+#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
+
+/****************************************************************************/
+/* Config IOCStatus values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+
+/****************************************************************************/
+/* SCSIIO Reply (SPI & FCP) initiator values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041)
+#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042)
+#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
+#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
+#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+
+/****************************************************************************/
+/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_EEDP_CRC_ERROR (0x004D)
+#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR (0x004E)
+#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
+
+/****************************************************************************/
+/* SCSI (SPI & FCP) target values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060)
+#define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061)
+#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete */
+#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
+#define MPI_IOCSTATUS_TARGET_ABORTED (0x0063)
+#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
+#define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
+#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
+#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B)
+
+/****************************************************************************/
+/* Additional FCP target values (obsolete) */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */
+#define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */
+#define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */
+#define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */
+
+/****************************************************************************/
+/* Fibre Channel Direct Access values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_FC_ABORTED (0x0066)
+#define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067)
+#define MPI_IOCSTATUS_FC_DID_INVALID (0x0068)
+#define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069)
+#define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED (0x006C)
+
+/****************************************************************************/
+/* LAN values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080)
+#define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081)
+#define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082)
+#define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083)
+#define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084)
+#define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085)
+#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086)
+#define MPI_IOCSTATUS_LAN_CANCELED (0x0087)
+
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+
+/****************************************************************************/
+/* Inband values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_INBAND_ABORTED (0x0098)
+#define MPI_IOCSTATUS_INBAND_NO_CONNECTION (0x0099)
+
+/****************************************************************************/
+/* Diagnostic Tools values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
+
+
+/****************************************************************************/
+/* IOCStatus flag to indicate that log info is available */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
+#define MPI_IOCSTATUS_MASK (0x7FFF)
+
+/****************************************************************************/
+/* LogInfo Types */
+/****************************************************************************/
+
+#define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000)
+#define MPI_IOCLOGINFO_TYPE_SHIFT (28)
+#define MPI_IOCLOGINFO_TYPE_NONE (0x0)
+#define MPI_IOCLOGINFO_TYPE_SCSI (0x1)
+#define MPI_IOCLOGINFO_TYPE_FC (0x2)
+#define MPI_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI_IOCLOGINFO_TYPE_ISCSI (0x4)
+#define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
+
+
+#endif
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
new file mode 100644
index 0000000..a5680d8
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -0,0 +1,2105 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_cnfg.h
+ * Title: MPI Config message, structures, and Pages
+ * Creation Date: July 27, 2000
+ *
+ * mpi_cnfg.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages.
+ * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
+ * fields to FC_DEVICE_0 page, updated the page version.
+ * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
+ * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
+ * and updated the page versions.
+ * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
+ * page and updated the page version.
+ * Added Information field and _INFO_PARAMS_NEGOTIATED
+ * definitionto SCSI_DEVICE_0 page.
+ * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
+ * page version.
+ * Added BucketsRemaining to LAN_1 page, redefined the
+ * state values, and updated the page version.
+ * Revised bus width definitions in SCSI_PORT_0,
+ * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
+ * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page
+ * version.
+ * Moved FC_DEVICE_0 PageAddress description to spec.
+ * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field
+ * widths in IOC_0 page and updated the page version.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * Added Manufacturing pages, IO Unit Page 2, SCSI SPI
+ * Port Page 2, FC Port Page 4, FC Port Page 5
+ * 11-15-00 01.01.02 Interim changes to match proposals
+ * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01.
+ * 12-05-00 01.01.04 Modified config page actions.
+ * 01-09-01 01.01.05 Added defines for page address formats.
+ * Data size for Manufacturing pages 2 and 3 no longer
+ * defined here.
+ * Io Unit Page 2 size is fixed at 4 adapters and some
+ * flags were changed.
+ * SCSI Port Page 2 Device Settings modified.
+ * New fields added to FC Port Page 0 and some flags
+ * cleaned up.
+ * Removed impedance flash from FC Port Page 1.
+ * Added FC Port pages 6 and 7.
+ * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0.
+ * 01-29-01 01.01.07 Changed some defines to make them 32 character unique.
+ * Added some LinkType defines for FcPortPage0.
+ * 02-20-01 01.01.08 Started using MPI_POINTER.
+ * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
+ * MPI_CONFIG_PAGETYPE_RAID_VOLUME.
+ * Added definitions and structures for IOC Page 2 and
+ * RAID Volume Page 2.
+ * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
+ * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
+ * Added VendorId and ProductRevLevel fields to
+ * RAIDVOL2_IM_PHYS_ID struct.
+ * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
+ * defines to make them compatible to MPI version 1.0.
+ * Added structure offset comments.
+ * 04-09-01 01.01.11 Added some new defines for the PageAddress field and
+ * removed some obsolete ones.
+ * Added IO Unit Page 3.
+ * Modified defines for Scsi Port Page 2.
+ * Modified RAID Volume Pages.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
+ * Added defines for the SEP bits in RVP2 VolumeSettings.
+ * Modified the DeviceSettings field in RVP2 to use the
+ * proper structure.
+ * Added defines for SES, SAF-TE, and cross channel for
+ * IOCPage2 CapabilitiesFlags.
+ * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
+ * Removed define for
+ * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
+ * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
+ * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
+ * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
+ * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
+ * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
+ * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
+ * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
+ * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
+ * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
+ * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
+ * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
+ * Added rejected bits to SCSI Device Page 0 Information.
+ * Increased size of ALPA array in FC Port Page 2 by one
+ * and removed a one byte reserved field.
+ * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in
+ * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
+ * Added structures for Manufacturing Page 4, IO Unit
+ * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
+ * RAID PhysDisk Page 0.
+ * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
+ * Modified some of the new defines to make them 32
+ * character unique.
+ * Modified how variable length pages (arrays) are defined.
+ * Added generic defines for hot spare pools and RAID
+ * volume types.
+ * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR.
+ * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
+ * related define, and bumped the page version define.
+ * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
+ * reserved byte and added a define.
+ * Added define for
+ * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
+ * Added new config page: CONFIG_PAGE_IOC_5.
+ * Added MaxAliases, MaxHardAliases, and NumCurrentAliases
+ * fields to CONFIG_PAGE_FC_PORT_0.
+ * Added AltConnector and NumRequestedAliases fields to
+ * CONFIG_PAGE_FC_PORT_1.
+ * Added new config page: CONFIG_PAGE_FC_PORT_10.
+ * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines.
+ * Added additional MPI_SCSIDEVPAGE0_NP_ defines.
+ * Added more MPI_SCSIDEVPAGE1_RP_ defines.
+ * Added define for
+ * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
+ * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
+ * Modified MPI_FCPORTPAGE5_FLAGS_ defines.
+ * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
+ * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
+ * Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
+ * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
+ * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for
+ * CONFIG_PAGE_FC_PORT_1.
+ * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
+ * an alias.
+ * Added more device id defines.
+ * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
+ * Added TargetConfig and IDConfig fields to
+ * CONFIG_PAGE_SCSI_PORT_1.
+ * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
+ * to control DV.
+ * Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
+ * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
+ * with ADISCHardALPA.
+ * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_CNFG_H
+#define MPI_CNFG_H
+
+
+/*****************************************************************************
+*
+* C o n f i g M e s s a g e a n d S t r u c t u r e s
+*
+*****************************************************************************/
+
+typedef struct _CONFIG_PAGE_HEADER
+{
+ U8 PageVersion; /* 00h */
+ U8 PageLength; /* 01h */
+ U8 PageNumber; /* 02h */
+ U8 PageType; /* 03h */
+} fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
+ ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
+
+typedef union _CONFIG_PAGE_HEADER_UNION
+{
+ ConfigPageHeader_t Struct;
+ U8 Bytes[4];
+ U16 Word16[2];
+ U32 Word32;
+} ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
+ fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
+
+typedef struct _CONFIG_EXTENDED_PAGE_HEADER
+{
+ U8 PageVersion; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 PageNumber; /* 02h */
+ U8 PageType; /* 03h */
+ U16 ExtPageLength; /* 04h */
+ U8 ExtPageType; /* 06h */
+ U8 Reserved2; /* 07h */
+} fCONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
+ ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t;
+
+
+
+/****************************************************************************
+* PageType field values
+****************************************************************************/
+#define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00)
+#define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10)
+#define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20)
+#define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30)
+#define MPI_CONFIG_PAGEATTR_MASK (0xF0)
+
+#define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00)
+#define MPI_CONFIG_PAGETYPE_IOC (0x01)
+#define MPI_CONFIG_PAGETYPE_BIOS (0x02)
+#define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03)
+#define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04)
+#define MPI_CONFIG_PAGETYPE_FC_PORT (0x05)
+#define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06)
+#define MPI_CONFIG_PAGETYPE_LAN (0x07)
+#define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
+#define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09)
+#define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
+#define MPI_CONFIG_PAGETYPE_INBAND (0x0B)
+#define MPI_CONFIG_PAGETYPE_EXTENDED (0x0F)
+#define MPI_CONFIG_PAGETYPE_MASK (0x0F)
+
+#define MPI_CONFIG_TYPENUM_MASK (0x0FFF)
+
+
+/****************************************************************************
+* ExtPageType field values
+****************************************************************************/
+#define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
+#define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
+#define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
+#define MPI_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
+
+
+/****************************************************************************
+* PageAddress field values
+****************************************************************************/
+#define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF)
+
+#define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF)
+#define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0)
+#define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00)
+#define MPI_SCSI_DEVICE_BUS_SHIFT (8)
+
+#define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000)
+#define MPI_FC_PORT_PGAD_PORT_SHIFT (28)
+#define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000)
+#define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000)
+#define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF)
+#define MPI_FC_PORT_PGAD_INDEX_SHIFT (0)
+
+#define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000)
+#define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28)
+#define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000)
+#define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000)
+#define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000)
+#define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28)
+#define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF)
+#define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0)
+#define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000)
+#define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00)
+#define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8)
+#define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF)
+#define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0)
+
+#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
+#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0)
+
+#define MPI_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI_SAS_DEVICE_PGAD_FORM_SHIFT (28)
+#define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID (0x00000001)
+#define MPI_SAS_DEVICE_PGAD_FORM_HANDLE (0x00000002)
+#define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK (0x0000FFFF)
+#define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT (0)
+#define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00)
+#define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT (8)
+#define MPI_SAS_DEVICE_PGAD_BT_TID_MASK (0x000000FF)
+#define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT (0)
+#define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK (0x0000FFFF)
+#define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT (0)
+
+#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x00FF0000)
+#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (16)
+#define MPI_SAS_PHY_PGAD_DEVHANDLE_MASK (0x0000FFFF)
+#define MPI_SAS_PHY_PGAD_DEVHANDLE_SHIFT (0)
+
+
+/****************************************************************************
+* Config Request Message
+****************************************************************************/
+typedef struct _MSG_CONFIG
+{
+ U8 Action; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 ExtPageLength; /* 04h */
+ U8 ExtPageType; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2[8]; /* 0Ch */
+ fCONFIG_PAGE_HEADER Header; /* 14h */
+ U32 PageAddress; /* 18h */
+ SGE_IO_UNION PageBufferSGE; /* 1Ch */
+} MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
+ Config_t, MPI_POINTER pConfig_t;
+
+
+/****************************************************************************
+* Action field values
+****************************************************************************/
+#define MPI_CONFIG_ACTION_PAGE_HEADER (0x00)
+#define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
+#define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
+#define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03)
+#define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
+#define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
+#define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
+
+
+/* Config Reply Message */
+typedef struct _MSG_CONFIG_REPLY
+{
+ U8 Action; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 ExtPageLength; /* 04h */
+ U8 ExtPageType; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2[2]; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ fCONFIG_PAGE_HEADER Header; /* 14h */
+} MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
+ ConfigReply_t, MPI_POINTER pConfigReply_t;
+
+
+
+/*****************************************************************************
+*
+* C o n f i g u r a t i o n P a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Manufacturing Config pages
+****************************************************************************/
+#define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000)
+/* Fibre Channel */
+#define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621)
+#define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624)
+#define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622)
+#define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628)
+#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
+/* SCSI */
+#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
+#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
+#define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032)
+#define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033)
+#define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040)
+#define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041)
+/* SAS */
+#define MPI_MANUFACTPAGE_DEVID_SAS1064 (0x0050)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 ChipName[16]; /* 04h */
+ U8 ChipRevision[8]; /* 14h */
+ U8 BoardName[16]; /* 1Ch */
+ U8 BoardAssembly[16]; /* 2Ch */
+ U8 BoardTracerNumber[16]; /* 3Ch */
+
+} fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
+ ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
+
+#define MPI_MANUFACTURING0_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 VPD[256]; /* 04h */
+} fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
+ ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
+
+#define MPI_MANUFACTURING1_PAGEVERSION (0x00)
+
+
+typedef struct _MPI_CHIP_REVISION_ID
+{
+ U16 DeviceID; /* 00h */
+ U8 PCIRevisionID; /* 02h */
+ U8 Reserved; /* 03h */
+} MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID,
+ MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t;
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS
+#define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
+#endif
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ MPI_CHIP_REVISION_ID ChipId; /* 04h */
+ U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
+} fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
+ ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
+
+#define MPI_MANUFACTURING2_PAGEVERSION (0x00)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_MAN_PAGE_3_INFO_WORDS
+#define MPI_MAN_PAGE_3_INFO_WORDS (1)
+#endif
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_3
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ MPI_CHIP_REVISION_ID ChipId; /* 04h */
+ U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
+} fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
+ ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
+
+#define MPI_MANUFACTURING3_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_4
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 04h */
+ U8 InfoOffset0; /* 08h */
+ U8 InfoSize0; /* 09h */
+ U8 InfoOffset1; /* 0Ah */
+ U8 InfoSize1; /* 0Bh */
+ U8 InquirySize; /* 0Ch */
+ U8 Flags; /* 0Dh */
+ U16 Reserved2; /* 0Eh */
+ U8 InquiryData[56]; /* 10h */
+ U32 ISVolumeSettings; /* 48h */
+ U32 IMEVolumeSettings; /* 4Ch */
+ U32 IMVolumeSettings; /* 50h */
+} fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
+ ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
+
+#define MPI_MANUFACTURING4_PAGEVERSION (0x01)
+
+/* defines for the Flags field */
+#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_5
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U64 BaseWWID; /* 04h */
+} fCONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
+ ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
+
+#define MPI_MANUFACTURING5_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_6
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} fCONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6,
+ ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t;
+
+#define MPI_MANUFACTURING6_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* IO Unit Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_IO_UNIT_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U64 UniqueValue; /* 04h */
+} fCONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0,
+ IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t;
+
+#define MPI_IOUNITPAGE0_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_IO_UNIT_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Flags; /* 04h */
+} fCONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
+ IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
+
+#define MPI_IOUNITPAGE1_PAGEVERSION (0x01)
+
+/* IO Unit Page 1 Flags defines */
+#define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000)
+#define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001)
+#define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002)
+#define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000)
+#define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
+#define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING (0x00000020)
+#define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040)
+#define MPI_IOUNITPAGE1_FORCE_32 (0x00000080)
+#define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
+
+
+typedef struct _MPI_ADAPTER_INFO
+{
+ U8 PciBusNumber; /* 00h */
+ U8 PciDeviceAndFunctionNumber; /* 01h */
+ U16 AdapterFlags; /* 02h */
+} MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO,
+ MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t;
+
+#define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
+#define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
+
+typedef struct _CONFIG_PAGE_IO_UNIT_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Flags; /* 04h */
+ U32 BiosVersion; /* 08h */
+ MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */
+} fCONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2,
+ IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t;
+
+#define MPI_IOUNITPAGE2_PAGEVERSION (0x00)
+
+#define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002)
+#define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004)
+#define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008)
+#define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010)
+
+#define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
+#define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
+#define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY (0x00000020)
+#define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX
+#define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_IO_UNIT_3
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 GPIOCount; /* 04h */
+ U8 Reserved1; /* 05h */
+ U16 Reserved2; /* 06h */
+ U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */
+} fCONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3,
+ IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t;
+
+#define MPI_IOUNITPAGE3_PAGEVERSION (0x01)
+
+#define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC)
+#define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
+#define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00)
+#define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01)
+
+
+/****************************************************************************
+* IOC Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_IOC_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 TotalNVStore; /* 04h */
+ U32 FreeNVStore; /* 08h */
+ U16 VendorID; /* 0Ch */
+ U16 DeviceID; /* 0Eh */
+ U8 RevisionID; /* 10h */
+ U8 Reserved[3]; /* 11h */
+ U32 ClassCode; /* 14h */
+ U16 SubsystemVendorID; /* 18h */
+ U16 SubsystemID; /* 1Ah */
+} fCONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0,
+ IOCPage0_t, MPI_POINTER pIOCPage0_t;
+
+#define MPI_IOCPAGE0_PAGEVERSION (0x01)
+
+
+typedef struct _CONFIG_PAGE_IOC_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Flags; /* 04h */
+ U32 CoalescingTimeout; /* 08h */
+ U8 CoalescingDepth; /* 0Ch */
+ U8 PCISlotNum; /* 0Dh */
+ U8 Reserved[2]; /* 0Eh */
+} fCONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
+ IOCPage1_t, MPI_POINTER pIOCPage1_t;
+
+#define MPI_IOCPAGE1_PAGEVERSION (0x01)
+
+/* defines for the Flags field */
+#define MPI_IOCPAGE1_EEDP_HOST_SUPPORTS_DIF (0x08000000)
+#define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000)
+#define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000)
+#define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000)
+#define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000)
+#define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001)
+
+#define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
+
+
+typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
+{
+ U8 VolumeID; /* 00h */
+ U8 VolumeBus; /* 01h */
+ U8 VolumeIOC; /* 02h */
+ U8 VolumePageNumber; /* 03h */
+ U8 VolumeType; /* 04h */
+ U8 Flags; /* 05h */
+ U16 Reserved3; /* 06h */
+} fCONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL,
+ ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t;
+
+/* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */
+
+#define MPI_RAID_VOL_TYPE_IS (0x00)
+#define MPI_RAID_VOL_TYPE_IME (0x01)
+#define MPI_RAID_VOL_TYPE_IM (0x02)
+
+/* IOC Page 2 Volume Flags values */
+
+#define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX
+#define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_IOC_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 CapabilitiesFlags; /* 04h */
+ U8 NumActiveVolumes; /* 08h */
+ U8 MaxVolumes; /* 09h */
+ U8 NumActivePhysDisks; /* 0Ah */
+ U8 MaxPhysDisks; /* 0Bh */
+ fCONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */
+} fCONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
+ IOCPage2_t, MPI_POINTER pIOCPage2_t;
+
+#define MPI_IOCPAGE2_PAGEVERSION (0x02)
+
+/* IOC Page 2 Capabilities flags */
+
+#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001)
+#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002)
+#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004)
+#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000)
+#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000)
+#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000)
+
+
+typedef struct _IOC_3_PHYS_DISK
+{
+ U8 PhysDiskID; /* 00h */
+ U8 PhysDiskBus; /* 01h */
+ U8 PhysDiskIOC; /* 02h */
+ U8 PhysDiskNum; /* 03h */
+} IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK,
+ Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX
+#define MPI_IOC_PAGE_3_PHYSDISK_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_IOC_3
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 NumPhysDisks; /* 04h */
+ U8 Reserved1; /* 05h */
+ U16 Reserved2; /* 06h */
+ IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */
+} fCONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3,
+ IOCPage3_t, MPI_POINTER pIOCPage3_t;
+
+#define MPI_IOCPAGE3_PAGEVERSION (0x00)
+
+
+typedef struct _IOC_4_SEP
+{
+ U8 SEPTargetID; /* 00h */
+ U8 SEPBus; /* 01h */
+ U16 Reserved; /* 02h */
+} IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP,
+ Ioc4Sep_t, MPI_POINTER pIoc4Sep_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_IOC_PAGE_4_SEP_MAX
+#define MPI_IOC_PAGE_4_SEP_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_IOC_4
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 ActiveSEP; /* 04h */
+ U8 MaxSEP; /* 05h */
+ U16 Reserved1; /* 06h */
+ IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */
+} fCONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4,
+ IOCPage4_t, MPI_POINTER pIOCPage4_t;
+
+#define MPI_IOCPAGE4_PAGEVERSION (0x00)
+
+
+typedef struct _IOC_5_HOT_SPARE
+{
+ U8 PhysDiskNum; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 HotSparePool; /* 02h */
+ U8 Flags; /* 03h */
+} IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE,
+ Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t;
+
+/* IOC Page 5 HotSpare Flags */
+#define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX
+#define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_IOC_5
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 04h */
+ U8 NumHotSpares; /* 08h */
+ U8 Reserved2; /* 09h */
+ U16 Reserved3; /* 0Ah */
+ IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */
+} fCONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5,
+ IOCPage5_t, MPI_POINTER pIOCPage5_t;
+
+#define MPI_IOCPAGE5_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* BIOS Port Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_BIOS_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 BiosOptions; /* 04h */
+ U32 IOCSettings; /* 08h */
+ U32 Reserved1; /* 0Ch */
+ U32 DeviceSettings; /* 10h */
+ U16 NumberOfDevices; /* 14h */
+ U16 Reserved2; /* 16h */
+ U16 IOTimeoutBlockDevicesNonRM; /* 18h */
+ U16 IOTimeoutSequential; /* 1Ah */
+ U16 IOTimeoutOther; /* 1Ch */
+ U16 IOTimeoutBlockDevicesRM; /* 1Eh */
+} fCONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
+ BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
+
+#define MPI_BIOSPAGE1_PAGEVERSION (0x00)
+
+/* values for the BiosOptions field */
+#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
+#define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE (0x00000200)
+#define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE (0x00000100)
+#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
+
+/* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY (0x00000F00)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY (8)
+
+#define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
+#define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
+#define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
+#define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
+
+#define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
+#define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
+#define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
+#define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
+#define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
+
+#define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
+
+/* values for the DeviceSettings field */
+#define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
+#define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
+#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
+#define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
+
+
+/****************************************************************************
+* SCSI Port Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_SCSI_PORT_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Capabilities; /* 04h */
+ U32 PhysicalInterface; /* 08h */
+} fCONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0,
+ SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t;
+
+#define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01)
+
+#define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001)
+#define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002)
+#define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004)
+#define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00)
+#define MPI_SCSIPORTPAGE0_SYNC_ASYNC (0x00)
+#define MPI_SCSIPORTPAGE0_SYNC_5 (0x32)
+#define MPI_SCSIPORTPAGE0_SYNC_10 (0x19)
+#define MPI_SCSIPORTPAGE0_SYNC_20 (0x0C)
+#define MPI_SCSIPORTPAGE0_SYNC_33_33 (0x0B)
+#define MPI_SCSIPORTPAGE0_SYNC_40 (0x0A)
+#define MPI_SCSIPORTPAGE0_SYNC_80 (0x09)
+#define MPI_SCSIPORTPAGE0_SYNC_160 (0x08)
+#define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN (0xFF)
+
+#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8)
+#define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \
+ >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \
+ )
+#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000)
+#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16)
+#define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \
+ >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \
+ )
+#define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000)
+#define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000)
+
+#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003)
+#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01)
+#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02)
+#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03)
+#define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000)
+#define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24)
+#define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE)
+#define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF)
+
+
+typedef struct _CONFIG_PAGE_SCSI_PORT_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Configuration; /* 04h */
+ U32 OnBusTimerValue; /* 08h */
+ U8 TargetConfig; /* 0Ch */
+ U8 Reserved1; /* 0Dh */
+ U16 IDConfig; /* 0Eh */
+} fCONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1,
+ SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t;
+
+#define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03)
+
+/* Configuration values */
+#define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF)
+#define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000)
+#define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID (16)
+
+/* TargetConfig values */
+#define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01)
+#define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02)
+
+
+typedef struct _MPI_DEVICE_INFO
+{
+ U8 Timeout; /* 00h */
+ U8 SyncFactor; /* 01h */
+ U16 DeviceFlags; /* 02h */
+} MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO,
+ MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t;
+
+typedef struct _CONFIG_PAGE_SCSI_PORT_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 PortFlags; /* 04h */
+ U32 PortSettings; /* 08h */
+ MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */
+} fCONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2,
+ SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t;
+
+#define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02)
+
+/* PortFlags values */
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010)
+
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020)
+#define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060)
+
+
+/* PortSettings values */
+#define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F)
+#define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030)
+#define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000)
+#define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010)
+#define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020)
+#define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030)
+#define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0)
+#define MPI_SCSIPORTPAGE2_PORT_RM_NONE (0x00000000)
+#define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY (0x00000040)
+#define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA (0x00000080)
+#define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00)
+#define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY (8)
+#define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000)
+#define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000)
+#define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000)
+#define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000)
+
+#define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001)
+#define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002)
+#define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004)
+#define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008)
+#define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010)
+#define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020)
+
+
+/****************************************************************************
+* SCSI Target Device Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_SCSI_DEVICE_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 NegotiatedParameters; /* 04h */
+ U32 Information; /* 08h */
+} fCONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0,
+ SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t;
+
+#define MPI_SCSIDEVPAGE0_PAGEVERSION (0x03)
+
+#define MPI_SCSIDEVPAGE0_NP_IU (0x00000001)
+#define MPI_SCSIDEVPAGE0_NP_DT (0x00000002)
+#define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004)
+#define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008)
+#define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010)
+#define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020)
+#define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040)
+#define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080)
+#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00)
+#define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD (8)
+#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000)
+#define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET (16)
+#define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000)
+#define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000)
+
+#define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001)
+#define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002)
+#define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004)
+#define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008)
+
+
+typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 RequestedParameters; /* 04h */
+ U32 Reserved; /* 08h */
+ U32 Configuration; /* 0Ch */
+} fCONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1,
+ SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t;
+
+#define MPI_SCSIDEVPAGE1_PAGEVERSION (0x04)
+
+#define MPI_SCSIDEVPAGE1_RP_IU (0x00000001)
+#define MPI_SCSIDEVPAGE1_RP_DT (0x00000002)
+#define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004)
+#define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008)
+#define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010)
+#define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020)
+#define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040)
+#define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080)
+#define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00)
+#define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD (8)
+#define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000)
+#define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET (16)
+#define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000)
+#define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000)
+
+#define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002)
+#define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004)
+#define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008)
+#define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010)
+
+
+typedef struct _CONFIG_PAGE_SCSI_DEVICE_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 DomainValidation; /* 04h */
+ U32 ParityPipeSelect; /* 08h */
+ U32 DataPipeSelect; /* 0Ch */
+} fCONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2,
+ SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t;
+
+#define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01)
+
+#define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010)
+#define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020)
+#define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380)
+#define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00)
+#define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000)
+#define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000)
+#define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000)
+#define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000)
+#define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000)
+
+#define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003)
+
+#define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000)
+#define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000)
+
+
+typedef struct _CONFIG_PAGE_SCSI_DEVICE_3
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U16 MsgRejectCount; /* 04h */
+ U16 PhaseErrorCount; /* 06h */
+ U16 ParityErrorCount; /* 08h */
+ U16 Reserved; /* 0Ah */
+} fCONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3,
+ SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t;
+
+#define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00)
+
+#define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE)
+#define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF)
+
+
+/****************************************************************************
+* FC Port Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_FC_PORT_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Flags; /* 04h */
+ U8 MPIPortNumber; /* 08h */
+ U8 LinkType; /* 09h */
+ U8 PortState; /* 0Ah */
+ U8 Reserved; /* 0Bh */
+ U32 PortIdentifier; /* 0Ch */
+ U64 WWNN; /* 10h */
+ U64 WWPN; /* 18h */
+ U32 SupportedServiceClass; /* 20h */
+ U32 SupportedSpeeds; /* 24h */
+ U32 CurrentSpeed; /* 28h */
+ U32 MaxFrameSize; /* 2Ch */
+ U64 FabricWWNN; /* 30h */
+ U64 FabricWWPN; /* 38h */
+ U32 DiscoveredPortsCount; /* 40h */
+ U32 MaxInitiators; /* 44h */
+ U8 MaxAliasesSupported; /* 48h */
+ U8 MaxHardAliasesSupported; /* 49h */
+ U8 NumCurrentAliases; /* 4Ah */
+ U8 Reserved1; /* 4Bh */
+} fCONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0,
+ FCPortPage0_t, MPI_POINTER pFCPortPage0_t;
+
+#define MPI_FCPORTPAGE0_PAGEVERSION (0x02)
+
+#define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F)
+#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR)
+#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET)
+#define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN)
+#define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)
+
+#define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010)
+#define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020)
+#define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040)
+
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00)
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000)
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100)
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200)
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400)
+#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800)
+
+#define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00)
+#define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01)
+#define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02)
+#define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03)
+#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04)
+#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05)
+#define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06)
+#define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07)
+#define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08)
+#define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09)
+#define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A)
+#define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B)
+#define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C)
+#define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D)
+#define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E)
+#define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F)
+
+#define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */
+#define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */
+#define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */
+#define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */
+#define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */
+#define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */
+#define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */
+#define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */
+
+#define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001)
+#define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002)
+#define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004)
+
+#define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0 Unknown - transceiver incapable of reporting */
+#define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */
+#define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */
+#define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */
+#define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT 8 4 GBit/sec */
+
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED (0x00008000) /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */
+
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_1
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Flags; /* 04h */
+ U64 NoSEEPROMWWNN; /* 08h */
+ U64 NoSEEPROMWWPN; /* 10h */
+ U8 HardALPA; /* 18h */
+ U8 LinkConfig; /* 19h */
+ U8 TopologyConfig; /* 1Ah */
+ U8 AltConnector; /* 1Bh */
+ U8 NumRequestedAliases; /* 1Ch */
+ U8 RR_TOV; /* 1Dh */
+ U8 InitiatorDeviceTimeout; /* 1Eh */
+ U8 InitiatorIoPendTimeout; /* 1Fh */
+} fCONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1,
+ FCPortPage1_t, MPI_POINTER pFCPortPage1_t;
+
+#define MPI_FCPORTPAGE1_PAGEVERSION (0x06)
+
+#define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000)
+#define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000)
+#define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000)
+#define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000)
+#define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000)
+#define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000)
+#define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000)
+#define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070)
+#define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008)
+#define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004)
+#define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002)
+#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001)
+#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000)
+
+#define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000)
+#define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28)
+#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
+#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
+#define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
+#define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
+
+#define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000)
+#define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010)
+#define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030)
+#define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050)
+
+#define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF)
+
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F)
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00)
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01)
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02)
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03)
+#define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F)
+
+#define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F)
+#define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01)
+#define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02)
+#define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F)
+
+#define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00)
+
+#define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_2
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 NumberActive; /* 04h */
+ U8 ALPA[127]; /* 05h */
+} fCONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2,
+ FCPortPage2_t, MPI_POINTER pFCPortPage2_t;
+
+#define MPI_FCPORTPAGE2_PAGEVERSION (0x01)
+
+
+typedef struct _WWN_FORMAT
+{
+ U64 WWNN; /* 00h */
+ U64 WWPN; /* 08h */
+} WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT,
+ WWNFormat, MPI_POINTER pWWNFormat;
+
+typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID
+{
+ WWN_FORMAT WWN;
+ U32 Did;
+} FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID,
+ PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t;
+
+typedef struct _FC_PORT_PERSISTENT
+{
+ FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */
+ U8 TargetID; /* 10h */
+ U8 Bus; /* 11h */
+ U16 Flags; /* 12h */
+} FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT,
+ PersistentData_t, MPI_POINTER pPersistentData_t;
+
+#define MPI_PERSISTENT_FLAGS_SHIFT (16)
+#define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001)
+#define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002)
+#define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004)
+#define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008)
+#define MPI_PERSISTENT_FLAGS_BY_DID (0x0080)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX
+#define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_FC_PORT_3
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */
+} fCONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3,
+ FCPortPage3_t, MPI_POINTER pFCPortPage3_t;
+
+#define MPI_FCPORTPAGE3_PAGEVERSION (0x01)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_4
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 PortFlags; /* 04h */
+ U32 PortSettings; /* 08h */
+} fCONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4,
+ FCPortPage4_t, MPI_POINTER pFCPortPage4_t;
+
+#define MPI_FCPORTPAGE4_PAGEVERSION (0x00)
+
+#define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008)
+
+#define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030)
+#define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000)
+#define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010)
+#define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020)
+#define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030)
+#define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0)
+#define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO
+{
+ U8 Flags; /* 00h */
+ U8 AliasAlpa; /* 01h */
+ U16 Reserved; /* 02h */
+ U64 AliasWWNN; /* 04h */
+ U64 AliasWWPN; /* 0Ch */
+} fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
+ MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
+ FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t;
+
+typedef struct _CONFIG_PAGE_FC_PORT_5
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */
+} fCONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5,
+ FCPortPage5_t, MPI_POINTER pFCPortPage5_t;
+
+#define MPI_FCPORTPAGE5_PAGEVERSION (0x02)
+
+#define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01)
+#define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02)
+#define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04)
+#define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08)
+#define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10)
+
+typedef struct _CONFIG_PAGE_FC_PORT_6
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Reserved; /* 04h */
+ U64 TimeSinceReset; /* 08h */
+ U64 TxFrames; /* 10h */
+ U64 RxFrames; /* 18h */
+ U64 TxWords; /* 20h */
+ U64 RxWords; /* 28h */
+ U64 LipCount; /* 30h */
+ U64 NosCount; /* 38h */
+ U64 ErrorFrames; /* 40h */
+ U64 DumpedFrames; /* 48h */
+ U64 LinkFailureCount; /* 50h */
+ U64 LossOfSyncCount; /* 58h */
+ U64 LossOfSignalCount; /* 60h */
+ U64 PrimativeSeqErrCount; /* 68h */
+ U64 InvalidTxWordCount; /* 70h */
+ U64 InvalidCrcCount; /* 78h */
+ U64 FcpInitiatorIoCount; /* 80h */
+} fCONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6,
+ FCPortPage6_t, MPI_POINTER pFCPortPage6_t;
+
+#define MPI_FCPORTPAGE6_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_7
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Reserved; /* 04h */
+ U8 PortSymbolicName[256]; /* 08h */
+} fCONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7,
+ FCPortPage7_t, MPI_POINTER pFCPortPage7_t;
+
+#define MPI_FCPORTPAGE7_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_8
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 BitVector[8]; /* 04h */
+} fCONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8,
+ FCPortPage8_t, MPI_POINTER pFCPortPage8_t;
+
+#define MPI_FCPORTPAGE8_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_9
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U32 Reserved; /* 04h */
+ U64 GlobalWWPN; /* 08h */
+ U64 GlobalWWNN; /* 10h */
+ U32 UnitType; /* 18h */
+ U32 PhysicalPortNumber; /* 1Ch */
+ U32 NumAttachedNodes; /* 20h */
+ U16 IPVersion; /* 24h */
+ U16 UDPPortNumber; /* 26h */
+ U8 IPAddress[16]; /* 28h */
+ U16 Reserved1; /* 38h */
+ U16 TopologyDiscoveryFlags; /* 3Ah */
+} fCONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9,
+ FCPortPage9_t, MPI_POINTER pFCPortPage9_t;
+
+#define MPI_FCPORTPAGE9_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA
+{
+ U8 Id; /* 10h */
+ U8 ExtId; /* 11h */
+ U8 Connector; /* 12h */
+ U8 Transceiver[8]; /* 13h */
+ U8 Encoding; /* 1Bh */
+ U8 BitRate_100mbs; /* 1Ch */
+ U8 Reserved1; /* 1Dh */
+ U8 Length9u_km; /* 1Eh */
+ U8 Length9u_100m; /* 1Fh */
+ U8 Length50u_10m; /* 20h */
+ U8 Length62p5u_10m; /* 21h */
+ U8 LengthCopper_m; /* 22h */
+ U8 Reseverved2; /* 22h */
+ U8 VendorName[16]; /* 24h */
+ U8 Reserved3; /* 34h */
+ U8 VendorOUI[3]; /* 35h */
+ U8 VendorPN[16]; /* 38h */
+ U8 VendorRev[4]; /* 48h */
+ U16 Reserved4; /* 4Ch */
+ U8 Reserved5; /* 4Eh */
+ U8 CC_BASE; /* 4Fh */
+} fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
+ MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
+ FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t;
+
+#define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00)
+#define MPI_FCPORT10_BASE_ID_GBIC (0x01)
+#define MPI_FCPORT10_BASE_ID_FIXED (0x02)
+#define MPI_FCPORT10_BASE_ID_SFP (0x03)
+#define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04)
+#define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F)
+#define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80)
+
+#define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03)
+#define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06)
+#define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07)
+#define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80)
+
+#define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00)
+#define MPI_FCPORT10_BASE_CONN_SC (0x01)
+#define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02)
+#define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03)
+#define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04)
+#define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05)
+#define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06)
+#define MPI_FCPORT10_BASE_CONN_LC (0x07)
+#define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08)
+#define MPI_FCPORT10_BASE_CONN_MU (0x09)
+#define MPI_FCPORT10_BASE_CONN_SG (0x0A)
+#define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B)
+#define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C)
+#define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F)
+#define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20)
+#define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21)
+#define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22)
+#define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F)
+#define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80)
+
+#define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00)
+#define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01)
+#define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02)
+#define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03)
+#define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA
+{
+ U8 Options[2]; /* 50h */
+ U8 BitRateMax; /* 52h */
+ U8 BitRateMin; /* 53h */
+ U8 VendorSN[16]; /* 54h */
+ U8 DateCode[8]; /* 64h */
+ U8 Reserved5[3]; /* 6Ch */
+ U8 CC_EXT; /* 6Fh */
+} fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
+ MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
+ FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t;
+
+#define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20)
+#define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10)
+#define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08)
+#define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04)
+#define MPI_FCPORT10_EXT_OPTION1_LOS (0x02)
+
+
+typedef struct _CONFIG_PAGE_FC_PORT_10
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 Flags; /* 04h */
+ U8 Reserved1; /* 05h */
+ U16 Reserved2; /* 06h */
+ U32 HwConfig1; /* 08h */
+ U32 HwConfig2; /* 0Ch */
+ fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */
+ fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */
+ U8 VendorSpecific[32]; /* 70h */
+} fCONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10,
+ FCPortPage10_t, MPI_POINTER pFCPortPage10_t;
+
+#define MPI_FCPORTPAGE10_PAGEVERSION (0x00)
+
+/* standard MODDEF pin definitions (from GBIC spec.) */
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001)
+#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000)
+
+#define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010)
+#define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020)
+
+
+/****************************************************************************
+* FC Device Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_FC_DEVICE_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U64 WWNN; /* 04h */
+ U64 WWPN; /* 0Ch */
+ U32 PortIdentifier; /* 14h */
+ U8 Protocol; /* 18h */
+ U8 Flags; /* 19h */
+ U16 BBCredit; /* 1Ah */
+ U16 MaxRxFrameSize; /* 1Ch */
+ U8 ADISCHardALPA; /* 1Eh */
+ U8 PortNumber; /* 1Fh */
+ U8 FcPhLowestVersion; /* 20h */
+ U8 FcPhHighestVersion; /* 21h */
+ U8 CurrentTargetID; /* 22h */
+ U8 CurrentBus; /* 23h */
+} fCONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0,
+ FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t;
+
+#define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03)
+
+#define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01)
+#define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02)
+#define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04)
+
+#define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01)
+#define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02)
+#define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04)
+#define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08)
+
+#define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK)
+#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK)
+#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
+#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID)
+#define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK)
+#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK)
+#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT)
+#define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK)
+
+#define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF)
+
+/****************************************************************************
+* RAID Volume Config Pages
+****************************************************************************/
+
+typedef struct _RAID_VOL0_PHYS_DISK
+{
+ U16 Reserved; /* 00h */
+ U8 PhysDiskMap; /* 02h */
+ U8 PhysDiskNum; /* 03h */
+} RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK,
+ RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t;
+
+#define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
+#define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
+
+typedef struct _RAID_VOL0_STATUS
+{
+ U8 Flags; /* 00h */
+ U8 State; /* 01h */
+ U16 Reserved; /* 02h */
+} RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS,
+ RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
+
+/* RAID Volume Page 0 VolumeStatus defines */
+
+#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01)
+#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02)
+#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04)
+#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08)
+
+#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00)
+#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01)
+#define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02)
+
+typedef struct _RAID_VOL0_SETTINGS
+{
+ U16 Settings; /* 00h */
+ U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */
+ U8 Reserved; /* 02h */
+} RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS,
+ RaidVol0Settings, MPI_POINTER pRaidVol0Settings;
+
+/* RAID Volume Page 0 VolumeSettings defines */
+
+#define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001)
+#define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002)
+#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004)
+#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008)
+#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010)
+#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000)
+
+/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
+#define MPI_RAID_HOT_SPARE_POOL_0 (0x01)
+#define MPI_RAID_HOT_SPARE_POOL_1 (0x02)
+#define MPI_RAID_HOT_SPARE_POOL_2 (0x04)
+#define MPI_RAID_HOT_SPARE_POOL_3 (0x08)
+#define MPI_RAID_HOT_SPARE_POOL_4 (0x10)
+#define MPI_RAID_HOT_SPARE_POOL_5 (0x20)
+#define MPI_RAID_HOT_SPARE_POOL_6 (0x40)
+#define MPI_RAID_HOT_SPARE_POOL_7 (0x80)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX
+#define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_RAID_VOL_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 VolumeID; /* 04h */
+ U8 VolumeBus; /* 05h */
+ U8 VolumeIOC; /* 06h */
+ U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */
+ RAID_VOL0_STATUS VolumeStatus; /* 08h */
+ RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */
+ U32 MaxLBA; /* 10h */
+ U32 Reserved1; /* 14h */
+ U32 StripeSize; /* 18h */
+ U32 Reserved2; /* 1Ch */
+ U32 Reserved3; /* 20h */
+ U8 NumPhysDisks; /* 24h */
+ U8 Reserved4; /* 25h */
+ U16 Reserved5; /* 26h */
+ RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */
+} fCONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
+ RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
+
+#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x01)
+
+
+/****************************************************************************
+* RAID Physical Disk Config Pages
+****************************************************************************/
+
+typedef struct _RAID_PHYS_DISK0_ERROR_DATA
+{
+ U8 ErrorCdbByte; /* 00h */
+ U8 ErrorSenseKey; /* 01h */
+ U16 Reserved; /* 02h */
+ U16 ErrorCount; /* 04h */
+ U8 ErrorASC; /* 06h */
+ U8 ErrorASCQ; /* 07h */
+ U16 SmartCount; /* 08h */
+ U8 SmartASC; /* 0Ah */
+ U8 SmartASCQ; /* 0Bh */
+} RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA,
+ RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t;
+
+typedef struct _RAID_PHYS_DISK_INQUIRY_DATA
+{
+ U8 VendorID[8]; /* 00h */
+ U8 ProductID[16]; /* 08h */
+ U8 ProductRevLevel[4]; /* 18h */
+ U8 Info[32]; /* 1Ch */
+} RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA,
+ RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData;
+
+typedef struct _RAID_PHYS_DISK0_SETTINGS
+{
+ U8 SepID; /* 00h */
+ U8 SepBus; /* 01h */
+ U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */
+ U8 PhysDiskSettings; /* 03h */
+} RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS,
+ RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t;
+
+typedef struct _RAID_PHYS_DISK0_STATUS
+{
+ U8 Flags; /* 00h */
+ U8 State; /* 01h */
+ U16 Reserved; /* 02h */
+} RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
+ RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
+
+/* RAID Volume 2 IM Physical Disk DiskStatus flags */
+
+#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01)
+#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02)
+
+#define MPI_PHYSDISK0_STATUS_ONLINE (0x00)
+#define MPI_PHYSDISK0_STATUS_MISSING (0x01)
+#define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02)
+#define MPI_PHYSDISK0_STATUS_FAILED (0x03)
+#define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04)
+#define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05)
+#define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06)
+#define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF)
+
+typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ U8 PhysDiskID; /* 04h */
+ U8 PhysDiskBus; /* 05h */
+ U8 PhysDiskIOC; /* 06h */
+ U8 PhysDiskNum; /* 07h */
+ RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */
+ U32 Reserved1; /* 0Ch */
+ U32 Reserved2; /* 10h */
+ U32 Reserved3; /* 14h */
+ U8 DiskIdentifier[16]; /* 18h */
+ RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */
+ RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */
+ U32 MaxLBA; /* 68h */
+ RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */
+} fCONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
+ RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
+
+#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* LAN Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_LAN_0
+{
+ ConfigPageHeader_t Header; /* 00h */
+ U16 TxRxModes; /* 04h */
+ U16 Reserved; /* 06h */
+ U32 PacketPrePad; /* 08h */
+} fCONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0,
+ LANPage0_t, MPI_POINTER pLANPage0_t;
+
+#define MPI_LAN_PAGE0_PAGEVERSION (0x01)
+
+#define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000)
+#define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001)
+#define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001)
+
+typedef struct _CONFIG_PAGE_LAN_1
+{
+ ConfigPageHeader_t Header; /* 00h */
+ U16 Reserved; /* 04h */
+ U8 CurrentDeviceState; /* 06h */
+ U8 Reserved1; /* 07h */
+ U32 MinPacketSize; /* 08h */
+ U32 MaxPacketSize; /* 0Ch */
+ U32 HardwareAddressLow; /* 10h */
+ U32 HardwareAddressHigh; /* 14h */
+ U32 MaxWireSpeedLow; /* 18h */
+ U32 MaxWireSpeedHigh; /* 1Ch */
+ U32 BucketsRemaining; /* 20h */
+ U32 MaxReplySize; /* 24h */
+ U32 NegWireSpeedLow; /* 28h */
+ U32 NegWireSpeedHigh; /* 2Ch */
+} fCONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1,
+ LANPage1_t, MPI_POINTER pLANPage1_t;
+
+#define MPI_LAN_PAGE1_PAGEVERSION (0x03)
+
+#define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00)
+#define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01)
+
+
+/****************************************************************************
+* Inband Config Pages
+****************************************************************************/
+
+typedef struct _CONFIG_PAGE_INBAND_0
+{
+ fCONFIG_PAGE_HEADER Header; /* 00h */
+ MPI_VERSION_FORMAT InbandVersion; /* 04h */
+ U16 MaximumBuffers; /* 08h */
+ U16 Reserved1; /* 0Ah */
+} fCONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0,
+ InbandPage0_t, MPI_POINTER pInbandPage0_t;
+
+#define MPI_INBAND_PAGEVERSION (0x00)
+
+
+
+/****************************************************************************
+* SAS IO Unit Config Pages
+****************************************************************************/
+
+typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
+{
+ U8 Port; /* 00h */
+ U8 PortFlags; /* 01h */
+ U8 PhyFlags; /* 02h */
+ U8 NegotiatedLinkRate; /* 03h */
+ U32 ControllerPhyDeviceInfo;/* 04h */
+ U16 AttachedDeviceHandle; /* 08h */
+ U16 ControllerDevHandle; /* 0Ah */
+ U32 Reserved2; /* 0Ch */
+} MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA,
+ SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_SAS_IOUNIT0_PHY_MAX
+#define MPI_SAS_IOUNIT0_PHY_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U8 NumPhys; /* 0Ch */
+ U8 Reserved2; /* 0Dh */
+ U16 Reserved3; /* 0Eh */
+ MPI_SAS_IO_UNIT0_PHY_DATA PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; /* 10h */
+} fCONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
+ SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
+
+#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x00)
+
+/* values for SAS IO Unit Page 0 PortFlags */
+#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08)
+#define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
+#define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
+#define MPI_SAS_IOUNIT0_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02)
+#define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
+
+/* values for SAS IO Unit Page 0 PhyFlags */
+#define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED (0x04)
+#define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT (0x02)
+#define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT (0x01)
+
+/* values for SAS IO Unit Page 0 NegotiatedLinkRate */
+#define MPI_SAS_IOUNIT0_RATE_UNKNOWN (0x00)
+#define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED (0x01)
+#define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION (0x02)
+#define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE (0x03)
+#define MPI_SAS_IOUNIT0_RATE_1_5 (0x08)
+#define MPI_SAS_IOUNIT0_RATE_3_0 (0x09)
+
+/* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
+
+
+typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
+{
+ U8 Port; /* 00h */
+ U8 PortFlags; /* 01h */
+ U8 PhyFlags; /* 02h */
+ U8 MaxMinLinkRate; /* 03h */
+ U32 ControllerPhyDeviceInfo;/* 04h */
+ U32 Reserved1; /* 08h */
+} MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
+ SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength at runtime.
+ */
+#ifndef MPI_SAS_IOUNIT1_PHY_MAX
+#define MPI_SAS_IOUNIT1_PHY_MAX (1)
+#endif
+
+typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U8 NumPhys; /* 0Ch */
+ U8 Reserved2; /* 0Dh */
+ U16 Reserved3; /* 0Eh */
+ MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 10h */
+} fCONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
+ SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
+
+#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x00)
+
+/* values for SAS IO Unit Page 0 PortFlags */
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
+
+/* values for SAS IO Unit Page 0 PhyFlags */
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01)
+
+/* values for SAS IO Unit Page 0 MaxMinLinkRate */
+#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80)
+#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90)
+#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F)
+#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08)
+#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09)
+
+/* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
+
+
+typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U16 MaxPersistentIDs; /* 0Ch */
+ U16 NumPersistentIDsUsed; /* 0Eh */
+ U8 Status; /* 10h */
+ U8 Flags; /* 11h */
+ U16 Reserved2; /* 12h */
+} fCONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
+ SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
+
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x00)
+
+/* values for SAS IO Unit Page 2 Status field */
+#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
+#define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01)
+
+/* values for SAS IO Unit Page 2 Flags field */
+#define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS (0x01)
+
+
+typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U32 MaxInvalidDwordCount; /* 0Ch */
+ U32 InvalidDwordCountTime; /* 10h */
+ U32 MaxRunningDisparityErrorCount; /* 14h */
+ U32 RunningDisparityErrorTime; /* 18h */
+ U32 MaxLossDwordSynchCount; /* 1Ch */
+ U32 LossDwordSynchCountTime; /* 20h */
+ U32 MaxPhyResetProblemCount; /* 24h */
+ U32 PhyResetProblemTime; /* 28h */
+} fCONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3,
+ SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t;
+
+#define MPI_SASIOUNITPAGE3_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U64 SASAddress; /* 0Ch */
+ U32 Reserved2; /* 14h */
+ U16 DevHandle; /* 18h */
+ U16 ParentDevHandle; /* 1Ah */
+ U16 ExpanderChangeCount; /* 1Ch */
+ U16 ExpanderRouteIndexes; /* 1Eh */
+ U8 NumPhys; /* 20h */
+ U8 SASLevel; /* 21h */
+ U8 Flags; /* 22h */
+ U8 Reserved3; /* 23h */
+} fCONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
+ SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
+
+#define MPI_SASEXPANDER0_PAGEVERSION (0x00)
+
+/* values for SAS Expander Page 0 Flags field */
+#define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02)
+#define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01)
+
+
+typedef struct _CONFIG_PAGE_SAS_DEVICE_0
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U64 SASAddress; /* 0Ch */
+ U32 Reserved2; /* 14h */
+ U16 DevHandle; /* 18h */
+ U8 TargetID; /* 1Ah */
+ U8 Bus; /* 1Bh */
+ U32 DeviceInfo; /* 1Ch */
+ U16 Flags; /* 20h */
+ U8 PhysicalPort; /* 22h */
+ U8 Reserved3; /* 23h */
+} fCONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
+ SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
+
+#define MPI_SASDEVICE0_PAGEVERSION (0x00)
+
+/* values for SAS Device Page 0 Flags field */
+#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x04)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x02)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x01)
+
+/* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
+
+
+typedef struct _CONFIG_PAGE_SAS_DEVICE_1
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U64 SASAddress; /* 0Ch */
+ U32 Reserved2; /* 14h */
+ U16 DevHandle; /* 18h */
+ U8 TargetID; /* 1Ah */
+ U8 Bus; /* 1Bh */
+ U8 InitialRegDeviceFIS[20];/* 1Ch */
+} fCONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1,
+ SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t;
+
+#define MPI_SASDEVICE1_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_SAS_PHY_0
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U64 SASAddress; /* 0Ch */
+ U16 AttachedDevHandle; /* 14h */
+ U8 AttachedPhyIdentifier; /* 16h */
+ U8 Reserved2; /* 17h */
+ U32 AttachedDeviceInfo; /* 18h */
+ U8 ProgrammedLinkRate; /* 20h */
+ U8 HwLinkRate; /* 21h */
+ U8 ChangeCount; /* 22h */
+ U8 Reserved3; /* 23h */
+ U32 PhyInfo; /* 24h */
+} fCONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
+ SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
+
+#define MPI_SASPHY0_PAGEVERSION (0x00)
+
+/* values for SAS PHY Page 0 ProgrammedLinkRate field */
+#define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0)
+#define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 (0x80)
+#define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 (0x90)
+#define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK (0x0F)
+#define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 (0x08)
+#define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 (0x09)
+
+/* values for SAS PHY Page 0 HwLinkRate field */
+#define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK (0xF0)
+#define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 (0x80)
+#define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 (0x90)
+#define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK (0x0F)
+#define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08)
+#define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09)
+
+/* values for SAS PHY Page 0 PhyInfo field */
+#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
+#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000)
+#define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY (0x00001000)
+
+#define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
+#define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
+
+#define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
+#define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING (0x00000000)
+#define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
+#define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING (0x00000020)
+
+#define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE (0x0000000F)
+#define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE (0x00000000)
+#define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED (0x00000001)
+#define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED (0x00000002)
+#define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE (0x00000003)
+#define MPI_SAS_PHY0_PHYINFO_RATE_1_5 (0x00000008)
+#define MPI_SAS_PHY0_PHYINFO_RATE_3_0 (0x00000009)
+
+
+typedef struct _CONFIG_PAGE_SAS_PHY_1
+{
+ fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
+ U32 Reserved1; /* 08h */
+ U32 InvalidDwordCount; /* 0Ch */
+ U32 RunningDisparityErrorCount; /* 10h */
+ U32 LossDwordSynchCount; /* 14h */
+ U32 PhyResetProblemCount; /* 18h */
+} fCONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1,
+ SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t;
+
+#define MPI_SASPHY1_PAGEVERSION (0x00)
+
+
+#endif
+
diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h
new file mode 100644
index 0000000..ea266b2
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_fc.h
@@ -0,0 +1,363 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_fc.h
+ * Title: MPI Fibre Channel messages and structures
+ * Creation Date: June 12, 2000
+ *
+ * mpi_fc.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 12-04-00 01.01.02 Added messages for Common Transport Send and
+ * Primitive Send.
+ * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
+ * and modified the FcPrimitiveSend flags.
+ * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
+ * field.
+ * Added FC_ABORT_TYPE_CT_SEND_REQUEST and
+ * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
+ * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
+ * 02-20-01 01.01.05 Started using MPI_POINTER.
+ * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
+ * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
+ * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
+ * Added structure offset comments.
+ * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * 09-28-01 01.02.02 Change name of reserved field in
+ * MSG_LINK_SERVICE_RSP_REPLY.
+ * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_FC_H
+#define MPI_FC_H
+
+
+/*****************************************************************************
+*
+* F C D i r e c t A c c e s s M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Link Service Buffer Post messages */
+/****************************************************************************/
+
+typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST
+{
+ U8 BufferPostFlags; /* 00h */
+ U8 BufferCount; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ SGE_TRANS_SIMPLE_UNION SGL;
+} MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
+ MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
+ LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t;
+
+#define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01)
+
+typedef struct _WWNFORMAT
+{
+ U32 PortNameHigh; /* 00h */
+ U32 PortNameLow; /* 04h */
+ U32 NodeNameHigh; /* 08h */
+ U32 NodeNameLow; /* 0Ch */
+} WWNFORMAT,
+ WwnFormat_t;
+
+/* Link Service Buffer Post Reply */
+typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY
+{
+ U8 Flags; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferLength; /* 14h */
+ U32 TransactionContext; /* 18h */
+ U32 Rctl_Did; /* 1Ch */
+ U32 Csctl_Sid; /* 20h */
+ U32 Type_Fctl; /* 24h */
+ U16 SeqCnt; /* 28h */
+ U8 Dfctl; /* 2Ah */
+ U8 SeqId; /* 2Bh */
+ U16 Rxid; /* 2Ch */
+ U16 Oxid; /* 2Eh */
+ U32 Parameter; /* 30h */
+ WWNFORMAT Wwn; /* 34h */
+} MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY,
+ LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t;
+
+#define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED (0x80)
+
+#define MPI_FC_DID_MASK (0x00FFFFFF)
+#define MPI_FC_DID_SHIFT (0)
+#define MPI_FC_RCTL_MASK (0xFF000000)
+#define MPI_FC_RCTL_SHIFT (24)
+#define MPI_FC_SID_MASK (0x00FFFFFF)
+#define MPI_FC_SID_SHIFT (0)
+#define MPI_FC_CSCTL_MASK (0xFF000000)
+#define MPI_FC_CSCTL_SHIFT (24)
+#define MPI_FC_FCTL_MASK (0x00FFFFFF)
+#define MPI_FC_FCTL_SHIFT (0)
+#define MPI_FC_TYPE_MASK (0xFF000000)
+#define MPI_FC_TYPE_SHIFT (24)
+
+/* obsolete name for the above */
+#define FCP_TARGET_DID_MASK (0x00FFFFFF)
+#define FCP_TARGET_DID_SHIFT (0)
+#define FCP_TARGET_RCTL_MASK (0xFF000000)
+#define FCP_TARGET_RCTL_SHIFT (24)
+#define FCP_TARGET_SID_MASK (0x00FFFFFF)
+#define FCP_TARGET_SID_SHIFT (0)
+#define FCP_TARGET_CSCTL_MASK (0xFF000000)
+#define FCP_TARGET_CSCTL_SHIFT (24)
+#define FCP_TARGET_FCTL_MASK (0x00FFFFFF)
+#define FCP_TARGET_FCTL_SHIFT (0)
+#define FCP_TARGET_TYPE_MASK (0xFF000000)
+#define FCP_TARGET_TYPE_SHIFT (24)
+
+
+/****************************************************************************/
+/* Link Service Response messages */
+/****************************************************************************/
+
+typedef struct _MSG_LINK_SERVICE_RSP_REQUEST
+{
+ U8 RspFlags; /* 00h */
+ U8 RspLength; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Rctl_Did; /* 0Ch */
+ U32 Csctl_Sid; /* 10h */
+ U32 Type_Fctl; /* 14h */
+ U16 SeqCnt; /* 18h */
+ U8 Dfctl; /* 1Ah */
+ U8 SeqId; /* 1Bh */
+ U16 Rxid; /* 1Ch */
+ U16 Oxid; /* 1Eh */
+ U32 Parameter; /* 20h */
+ SGE_SIMPLE_UNION SGL; /* 24h */
+} MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST,
+ LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t;
+
+#define LINK_SERVICE_RSP_FLAGS_IMMEDIATE (0x80)
+#define LINK_SERVICE_RSP_FLAGS_PORT_MASK (0x01)
+
+
+/* Link Service Response Reply */
+typedef struct _MSG_LINK_SERVICE_RSP_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 InitiatorIndex; /* 14h */
+} MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY,
+ LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t;
+
+
+/****************************************************************************/
+/* Extended Link Service Send messages */
+/****************************************************************************/
+
+typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST
+{
+ U8 SendFlags; /* 00h */
+ U8 AliasIndex; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U32 MsgFlags_Did; /* 04h */
+ U32 MsgContext; /* 08h */
+ U32 ElsCommandCode; /* 0Ch */
+ SGE_SIMPLE_UNION SGL; /* 10h */
+} MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST,
+ ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t;
+
+#define EX_LINK_SERVICE_SEND_DID_MASK (0x00FFFFFF)
+#define EX_LINK_SERVICE_SEND_DID_SHIFT (0)
+#define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK (0xFF000000)
+#define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT (24)
+
+
+/* Extended Link Service Send Reply */
+typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY
+{
+ U8 Reserved; /* 00h */
+ U8 AliasIndex; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ResponseLength; /* 14h */
+} MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY,
+ ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t;
+
+/****************************************************************************/
+/* FC Abort messages */
+/****************************************************************************/
+
+typedef struct _MSG_FC_ABORT_REQUEST
+{
+ U8 AbortFlags; /* 00h */
+ U8 AbortType; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 TransactionContextToAbort; /* 0Ch */
+} MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST,
+ FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t;
+
+#define FC_ABORT_FLAG_PORT_MASK (0x01)
+
+#define FC_ABORT_TYPE_ALL_FC_BUFFERS (0x00)
+#define FC_ABORT_TYPE_EXACT_FC_BUFFER (0x01)
+#define FC_ABORT_TYPE_CT_SEND_REQUEST (0x02)
+#define FC_ABORT_TYPE_EXLINKSEND_REQUEST (0x03)
+
+/* FC Abort Reply */
+typedef struct _MSG_FC_ABORT_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY,
+ FcAbortReply_t, MPI_POINTER pFcAbortReply_t;
+
+
+/****************************************************************************/
+/* FC Common Transport Send messages */
+/****************************************************************************/
+
+typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST
+{
+ U8 SendFlags; /* 00h */
+ U8 AliasIndex; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U32 MsgFlags_Did; /* 04h */
+ U32 MsgContext; /* 08h */
+ U16 CTCommandCode; /* 0Ch */
+ U8 FsType; /* 0Eh */
+ U8 Reserved1; /* 0Fh */
+ SGE_SIMPLE_UNION SGL; /* 10h */
+} MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
+ MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
+ FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t;
+
+#define MPI_FC_CT_SEND_DID_MASK (0x00FFFFFF)
+#define MPI_FC_CT_SEND_DID_SHIFT (0)
+#define MPI_FC_CT_SEND_MSGFLAGS_MASK (0xFF000000)
+#define MPI_FC_CT_SEND_MSGFLAGS_SHIFT (24)
+
+
+/* FC Common Transport Send Reply */
+typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY
+{
+ U8 Reserved; /* 00h */
+ U8 AliasIndex; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ResponseLength; /* 14h */
+} MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY,
+ FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t;
+
+
+/****************************************************************************/
+/* FC Primitive Send messages */
+/****************************************************************************/
+
+typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST
+{
+ U8 SendFlags; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 FcPrimitive[4]; /* 0Ch */
+} MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST,
+ FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t;
+
+#define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK (0x01)
+#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK (0x02)
+#define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK (0x04)
+#define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND (0x08)
+#define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE (0x10)
+#define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND (0x20)
+#define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL (0x40)
+#define MPI_FC_PRIM_SEND_FLAGS_FOREVER (0x80)
+
+/* FC Primitive Send Reply */
+typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY
+{
+ U8 SendFlags; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY,
+ FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t;
+
+#endif
+
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
new file mode 100644
index 0000000..0deb772
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -0,0 +1,276 @@
+
+ ==============================
+ MPI Header File Change History
+ ==============================
+
+ Copyright (c) 2000-2001 LSI Logic Corporation.
+
+ ---------------------------------------
+ Header Set Release Version: 01.01.10
+ Header Set Release Date: 04-09-01
+ ---------------------------------------
+
+ Filename Current version Prior version
+ ---------- --------------- -------------
+ mpi.h 01.01.07 01.01.06
+ mpi_ioc.h 01.01.07 01.01.06
+ mpi_cnfg.h 01.01.11 01.01.10
+ mpi_init.h 01.01.05 01.01.04
+ mpi_targ.h 01.01.04 01.01.04
+ mpi_fc.h 01.01.07 01.01.06
+ mpi_lan.h 01.01.03 01.01.03
+ mpi_raid.h 01.01.02 01.01.02
+ mpi_type.h 01.01.02 01.01.02
+ mpi_history.txt 01.01.09 01.01.09
+
+
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+
+mpi.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
+ * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
+ * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions.
+ * Removed LAN_SUSPEND function definition.
+ * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
+ * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
+ * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
+ * 07-27-00 01.00.04 Added MPI_FAULT_ definitions.
+ * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
+ * Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
+ * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 12-04-00 01.01.02 Added new function codes.
+ * 01-09-01 01.01.03 Added more definitions to the system interface section
+ * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
+ * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01.
+ * 02-20-01 01.01.05 Started using MPI_POINTER.
+ * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
+ * MPI_DIAG_CLEAR_FLASH_BAD_SIG.
+ * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
+ * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define.
+ * Added function codes for RAID.
+ * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE,
+ * MPI_DOORBELL_USED, to better match the spec.
+ * --------------------------------------------------------------------------
+
+mpi_ioc.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure.
+ * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY.
+ * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure.
+ * Added _MSG_EVENT_ACK_REPLY structure.
+ * Added _MSG_FW_DOWNLOAD_REPLY structure.
+ * Added _MSG_TOOLBOX_REPLY structure.
+ * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure.
+ * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI,
+ * _LINK_STATUS, _LOOP_STATE and _LOGOUT.
+ * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in
+ * _MSG_EVENT_ACK_REPLY structure to match specification.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * Added a value for Manufacturer to WhoInit
+ * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and
+ * removed toolbox message.
+ * 01-09-01 01.01.03 Added event enabled and disabled defines.
+ * Added structures for FwHeader and DataHeader.
+ * Added ImageType to FwUpload reply.
+ * 02-20-01 01.01.04 Started using MPI_POINTER.
+ * 02-27-01 01.01.05 Added event for RAID status change and its event data.
+ * Added IocNumber field to MSG_IOC_FACTS_REPLY.
+ * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER.
+ * Added structure offset comments.
+ * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE.
+ * --------------------------------------------------------------------------
+
+mpi_cnfg.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages.
+ * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
+ * fields to FC_DEVICE_0 page, updated the page version.
+ * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
+ * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
+ * and updated the page versions.
+ * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
+ * page and updated the page version.
+ * Added Information field and _INFO_PARAMS_NEGOTIATED
+ * definitionto SCSI_DEVICE_0 page.
+ * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
+ * page version.
+ * Added BucketsRemaining to LAN_1 page, redefined the
+ * state values, and updated the page version.
+ * Revised bus width definitions in SCSI_PORT_0,
+ * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
+ * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page
+ * version.
+ * Moved FC_DEVICE_0 PageAddress description to spec.
+ * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field
+ * widths in IOC_0 page and updated the page version.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * Added Manufacturing pages, IO Unit Page 2, SCSI SPI
+ * Port Page 2, FC Port Page 4, FC Port Page 5
+ * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01.
+ * 12-05-00 01.01.04 Modified config page actions.
+ * 01-09-01 01.01.05 Added defines for page address formats.
+ * Data size for Manufacturing pages 2 and 3 no longer
+ * defined here.
+ * Io Unit Page 2 size is fixed at 4 adapters and some
+ * flags were changed.
+ * SCSI Port Page 2 Device Settings modified.
+ * New fields added to FC Port Page 0 and some flags
+ * cleaned up.
+ * Removed impedance flash from FC Port Page 1.
+ * Added FC Port pages 6 and 7.
+ * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0.
+ * 01-29-01 01.01.07 Changed some defines to make them 32 character unique.
+ * Added some LinkType defines for FcPortPage0.
+ * 02-20-01 01.01.08 Started using MPI_POINTER.
+ * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
+ * MPI_CONFIG_PAGETYPE_RAID_VOLUME.
+ * Added definitions and structures for IOC Page 2 and
+ * RAID Volume Page 2.
+ * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
+ * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
+ * Added VendorId and ProductRevLevel fields to
+ * RAIDVOL2_IM_PHYS_ID struct.
+ * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
+ * defines to make them compatible to MPI version 1.0.
+ * Added structure offset comments.
+ * 04-09-01 01.01.11 Added some new defines for the PageAddress field and
+ * removed some obsolete ones.
+ * Added IO Unit Page 3.
+ * Modified defines for Scsi Port Page 2.
+ * Modified RAID Volume Pages.
+ * --------------------------------------------------------------------------
+
+mpi_init.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
+ * 02-20-01 01.01.03 Started using MPI_POINTER.
+ * 03-27-01 01.01.04 Added structure offset comments.
+ * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
+ * --------------------------------------------------------------------------
+
+mpi_targ.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
+ * Corrected DECSRIPTOR typo to DESCRIPTOR.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * Modified target mode to use IoIndex instead of
+ * HostIndex and IocIndex. Added Alias.
+ * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
+ * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
+ * 02-20-01 01.01.03 Started using MPI_POINTER.
+ * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
+ * MPI_TARGET_FCP_CMD_BUFFER.
+ * 03-27-01 01.01.04 Added structure offset comments.
+ * --------------------------------------------------------------------------
+
+mpi_fc.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 12-04-00 01.01.02 Added messages for Common Transport Send and
+ * Primitive Send.
+ * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
+ * and modified the FcPrimitiveSend flags.
+ * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
+ * field.
+ * Added FC_ABORT_TYPE_CT_SEND_REQUEST and
+ * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
+ * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
+ * 02-20-01 01.01.05 Started using MPI_POINTER.
+ * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
+ * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
+ * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
+ * Added structure offset comments.
+ * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
+ * --------------------------------------------------------------------------
+
+mpi_lan.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY.
+ * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
+ * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions.
+ * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec.
+ * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal.
+ * Changed transaction context usage to bucket/buffer.
+ * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
+ * to lan private header file
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 02-20-01 01.01.02 Started using MPI_POINTER.
+ * 03-27-01 01.01.03 Added structure offset comments.
+ * --------------------------------------------------------------------------
+
+mpi_raid.h
+ * 02-27-01 01.01.01 Original release for this file.
+ * 03-27-01 01.01.02 Added structure offset comments.
+ * --------------------------------------------------------------------------
+
+mpi_type.h
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
+ * --------------------------------------------------------------------------
+
+mpi_history.txt Parts list history
+
+Filename 01.01.10
+---------- --------
+mpi.h 01.01.07
+mpi_ioc.h 01.01.07
+mpi_cnfg.h 01.01.11
+mpi_init.h 01.01.05
+mpi_targ.h 01.01.04
+mpi_fc.h 01.01.07
+mpi_lan.h 01.01.03
+mpi_raid.h 01.01.02
+mpi_type.h 01.01.02
+
+Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04
+---------- -------- -------- -------- -------- -------- --------
+mpi.h 01.01.06 01.01.06 01.01.05 01.01.04 01.01.04 01.01.03
+mpi_ioc.h 01.01.06 01.01.05 01.01.04 01.01.03 01.01.03 01.01.03
+mpi_cnfg.h 01.01.10 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05
+mpi_init.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
+mpi_targ.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
+mpi_fc.h 01.01.06 01.01.05 01.01.05 01.01.04 01.01.04 01.01.03
+mpi_lan.h 01.01.03 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
+mpi_raid.h 01.01.02 01.01.01
+mpi_type.h 01.01.02 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
+
+Filename 01.01.03 01.01.02 01.01.01 01.00.07 01.00.06 01.00.05
+---------- -------- -------- -------- -------- -------- --------
+mpi.h 01.01.02 01.01.02 01.01.01 01.00.04 01.00.04 01.00.03
+mpi_ioc.h 01.01.02 01.01.02 01.01.01 01.00.05 01.00.04 01.00.03
+mpi_cnfg.h 01.01.04 01.01.03 01.01.01 01.00.05 01.00.05 01.00.04
+mpi_init.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
+mpi_targ.h 01.01.01 01.01.01 01.01.01 01.00.02 01.00.02 01.00.02
+mpi_fc.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
+mpi_lan.h 01.01.01 01.01.01 01.01.01 01.00.05 01.00.05 01.00.05
+mpi_type.h 01.01.01 01.01.01 01.01.01 01.00.01 01.00.01 01.00.01
+
+Filename 01.00.04 01.00.03 01.00.02 01.00.01 00.10.02 00.10.01
+---------- -------- -------- -------- -------- -------- --------
+mpi.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.02 00.10.01
+mpi_ioc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
+mpi_cnfg.h 01.00.03 01.00.02 01.00.02 01.00.01 00.10.01 00.10.01
+mpi_init.h 01.00.02 01.00.02 01.00.02 01.00.01 00.10.02 00.10.01
+mpi_targ.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
+mpi_fc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.01 00.10.01
+mpi_lan.h 01.00.03 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
+mpi_type.h 01.00.01 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
+
+
+ * --------------------------------------------------------------------------
+
diff --git a/drivers/message/fusion/lsi/mpi_inb.h b/drivers/message/fusion/lsi/mpi_inb.h
new file mode 100644
index 0000000..dae29fb
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_inb.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_inb.h
+ * Title: MPI Inband structures and definitions
+ * Creation Date: September 30, 2003
+ *
+ * mpi_inb.h Version: 01.03.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * ??-??-?? 01.03.01 Original release.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_INB_H
+#define MPI_INB_H
+
+/******************************************************************************
+*
+* I n b a n d M e s s a g e s
+*
+*******************************************************************************/
+
+
+/****************************************************************************/
+/* Inband Buffer Post Request */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_BUFFER_POST_REQUEST
+{
+ U8 Reserved1; /* 00h */
+ U8 BufferCount; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved4; /* 0Ch */
+ SGE_TRANS_SIMPLE_UNION SGL; /* 10h */
+} MSG_INBAND_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REQUEST,
+ MpiInbandBufferPostRequest_t , MPI_POINTER pMpiInbandBufferPostRequest_t;
+
+
+typedef struct _WWN_FC_FORMAT
+{
+ U64 NodeName; /* 00h */
+ U64 PortName; /* 08h */
+} WWN_FC_FORMAT, MPI_POINTER PTR_WWN_FC_FORMAT,
+ WwnFcFormat_t, MPI_POINTER pWwnFcFormat_t;
+
+typedef struct _WWN_SAS_FORMAT
+{
+ U64 WorldWideID; /* 00h */
+ U32 Reserved1; /* 08h */
+ U32 Reserved2; /* 0Ch */
+} WWN_SAS_FORMAT, MPI_POINTER PTR_WWN_SAS_FORMAT,
+ WwnSasFormat_t, MPI_POINTER pWwnSasFormat_t;
+
+typedef union _WWN_INBAND_FORMAT
+{
+ WWN_FC_FORMAT Fc;
+ WWN_SAS_FORMAT Sas;
+} WWN_INBAND_FORMAT, MPI_POINTER PTR_WWN_INBAND_FORMAT,
+ WwnInbandFormat, MPI_POINTER pWwnInbandFormat;
+
+
+/* Inband Buffer Post reply message */
+
+typedef struct _MSG_INBAND_BUFFER_POST_REPLY
+{
+ U16 Reserved1; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferLength; /* 14h */
+ U32 TransactionContext; /* 18h */
+ WWN_INBAND_FORMAT Wwn; /* 1Ch */
+ U32 IOCIdentifier[4]; /* 2Ch */
+} MSG_INBAND_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REPLY,
+ MpiInbandBufferPostReply_t, MPI_POINTER pMpiInbandBufferPostReply_t;
+
+
+/****************************************************************************/
+/* Inband Send Request */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_SEND_REQUEST
+{
+ U16 Reserved1; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved4; /* 0Ch */
+ WWN_INBAND_FORMAT Wwn; /* 10h */
+ U32 Reserved5; /* 20h */
+ SGE_IO_UNION SGL; /* 24h */
+} MSG_INBAND_SEND_REQUEST, MPI_POINTER PTR_MSG_INBAND_SEND_REQUEST,
+ MpiInbandSendRequest_t , MPI_POINTER pMpiInbandSendRequest_t;
+
+
+/* Inband Send reply message */
+
+typedef struct _MSG_INBAND_SEND_REPLY
+{
+ U16 Reserved1; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ResponseLength; /* 14h */
+} MSG_INBAND_SEND_REPLY, MPI_POINTER PTR_MSG_INBAND_SEND_REPLY,
+ MpiInbandSendReply_t, MPI_POINTER pMpiInbandSendReply_t;
+
+
+/****************************************************************************/
+/* Inband Response Request */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_RSP_REQUEST
+{
+ U16 Reserved1; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved4; /* 0Ch */
+ WWN_INBAND_FORMAT Wwn; /* 10h */
+ U32 IOCIdentifier[4]; /* 20h */
+ U32 ResponseLength; /* 30h */
+ SGE_IO_UNION SGL; /* 34h */
+} MSG_INBAND_RSP_REQUEST, MPI_POINTER PTR_MSG_INBAND_RSP_REQUEST,
+ MpiInbandRspRequest_t , MPI_POINTER pMpiInbandRspRequest_t;
+
+
+/* Inband Response reply message */
+
+typedef struct _MSG_INBAND_RSP_REPLY
+{
+ U16 Reserved1; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_INBAND_RSP_REPLY, MPI_POINTER PTR_MSG_INBAND_RSP_REPLY,
+ MpiInbandRspReply_t, MPI_POINTER pMpiInbandRspReply_t;
+
+
+/****************************************************************************/
+/* Inband Abort Request */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_ABORT_REQUEST
+{
+ U8 Reserved1; /* 00h */
+ U8 AbortType; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved4; /* 0Ch */
+ U32 ContextToAbort; /* 10h */
+} MSG_INBAND_ABORT_REQUEST, MPI_POINTER PTR_MSG_INBAND_ABORT_REQUEST,
+ MpiInbandAbortRequest_t , MPI_POINTER pMpiInbandAbortRequest_t;
+
+#define MPI_INBAND_ABORT_TYPE_ALL_BUFFERS (0x00)
+#define MPI_INBAND_ABORT_TYPE_EXACT_BUFFER (0x01)
+#define MPI_INBAND_ABORT_TYPE_SEND_REQUEST (0x02)
+#define MPI_INBAND_ABORT_TYPE_RESPONSE_REQUEST (0x03)
+
+
+/* Inband Abort reply message */
+
+typedef struct _MSG_INBAND_ABORT_REPLY
+{
+ U8 Reserved1; /* 00h */
+ U8 AbortType; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_INBAND_ABORT_REPLY, MPI_POINTER PTR_MSG_INBAND_ABORT_REPLY,
+ MpiInbandAbortReply_t, MPI_POINTER pMpiInbandAbortReply_t;
+
+
+#endif
+
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
new file mode 100644
index 0000000..b3c95fd
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_init.h
+ * Title: MPI initiator mode messages and structures
+ * Creation Date: June 8, 2000
+ *
+ * mpi_init.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
+ * 11-02-00 01.01.01 Original release for post 1.0 work.
+ * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
+ * 02-20-01 01.01.03 Started using MPI_POINTER.
+ * 03-27-01 01.01.04 Added structure offset comments.
+ * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
+ * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
+ * MSG_SCSI_IO_REPLY.
+ * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
+ * Processor messages.
+ * 10-04-01 01.02.04 Added defines for SEP request Action field.
+ * 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
+ * for SCSI IO requests.
+ * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
+ * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_INIT_H
+#define MPI_INIT_H
+
+
+/*****************************************************************************
+*
+* S C S I I n i t i a t o r M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* SCSI IO messages and associated structures */
+/****************************************************************************/
+
+typedef struct _MSG_SCSI_IO_REQUEST
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Reserved; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Control; /* 14h */
+ U8 CDB[16]; /* 18h */
+ U32 DataLength; /* 28h */
+ U32 SenseBufferLowAddr; /* 2Ch */
+ SGE_IO_UNION SGL; /* 30h */
+} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
+ SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
+
+
+/* SCSI IO MsgFlags bits */
+
+#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01)
+#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00)
+#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01)
+#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02)
+#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00)
+#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02)
+#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
+#define MPI_SCSIIO_MSGFLGS_EEDP_TYPE_MASK (0xE0)
+#define MPI_SCSIIO_MSGFLGS_EEDP_NONE (0x00)
+#define MPI_SCSIIO_MSGFLGS_EEDP_RDPROTECT_T10 (0x20)
+#define MPI_SCSIIO_MSGFLGS_EEDP_VRPROTECT_T10 (0x40)
+#define MPI_SCSIIO_MSGFLGS_EEDP_WRPROTECT_T10 (0x60)
+#define MPI_SCSIIO_MSGFLGS_EEDP_520_READ_MODE1 (0x20)
+#define MPI_SCSIIO_MSGFLGS_EEDP_520_WRITE_MODE1 (0x40)
+#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_READ_MODE1 (0x60)
+#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_WRITE_MODE1 (0x80)
+
+
+/* SCSI IO LUN fields */
+
+#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00)
+#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00)
+
+/* SCSI IO Control bits */
+
+#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
+#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
+#define MPI_SCSIIO_CONTROL_WRITE (0x01000000)
+#define MPI_SCSIIO_CONTROL_READ (0x02000000)
+
+#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000)
+#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
+
+#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
+#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
+#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100)
+#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
+#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400)
+#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500)
+#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700)
+
+#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000)
+#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000)
+#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000)
+#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000)
+#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000)
+#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000)
+#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000)
+#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000)
+#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000)
+
+
+/* SCSI IO reply structure */
+typedef struct _MSG_SCSI_IO_REPLY
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Reserved; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 SCSIStatus; /* 0Ch */
+ U8 SCSIState; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferCount; /* 14h */
+ U32 SenseCount; /* 18h */
+ U32 ResponseInfo; /* 1Ch */
+} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
+ SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
+
+
+/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */
+
+#define MPI_SCSI_STATUS_SUCCESS (0x00)
+#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02)
+#define MPI_SCSI_STATUS_CONDITION_MET (0x04)
+#define MPI_SCSI_STATUS_BUSY (0x08)
+#define MPI_SCSI_STATUS_INTERMEDIATE (0x10)
+#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
+#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
+#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22)
+#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28)
+#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30)
+
+#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80)
+#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81)
+#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED (0x82)
+
+
+/* SCSI IO Reply SCSIState values */
+
+#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01)
+#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02)
+#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04)
+#define MPI_SCSI_STATE_TERMINATED (0x08)
+#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
+#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20)
+
+/* SCSI IO Reply ResponseInfo values */
+/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */
+
+#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000)
+#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000)
+#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000)
+#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000)
+#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000)
+#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000)
+#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000)
+
+
+/****************************************************************************/
+/* SCSI IO 32 Request message structure */
+/****************************************************************************/
+
+typedef struct _MSG_SCSI_IO32_REQUEST
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Reserved; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Control; /* 14h */
+ U8 CDB[32]; /* 18h */
+ U32 DataLength; /* 38h */
+ U32 SenseBufferLowAddr; /* 3Ch */
+ SGE_IO_UNION SGL; /* 40h */
+} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
+ SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
+
+/* SCSI IO 32 uses the same defines as above for SCSI IO */
+
+
+/****************************************************************************/
+/* SCSI Task Management messages */
+/****************************************************************************/
+
+typedef struct _MSG_SCSI_TASK_MGMT
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved; /* 04h */
+ U8 TaskType; /* 05h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Reserved2[7]; /* 14h */
+ U32 TaskMsgContext; /* 30h */
+} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT,
+ SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t;
+
+/* TaskType values */
+
+#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
+#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
+#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
+#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04)
+#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
+#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
+
+/* MsgFlags bits */
+#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
+#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02)
+#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
+
+/* SCSI Task Management Reply */
+typedef struct _MSG_SCSI_TASK_MGMT_REPLY
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved; /* 04h */
+ U8 TaskType; /* 05h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2[2]; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TerminationCount; /* 14h */
+} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
+ SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
+
+
+/****************************************************************************/
+/* SCSI Enclosure Processor messages */
+/****************************************************************************/
+
+typedef struct _MSG_SEP_REQUEST
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Action; /* 04h */
+ U8 Reserved1; /* 05h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 SlotStatus; /* 0Ch */
+} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
+ SEPRequest_t, MPI_POINTER pSEPRequest_t;
+
+/* Action defines */
+#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00)
+#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01)
+
+/* SlotStatus bits for MSG_SEP_REQUEST */
+#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
+#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
+#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
+#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
+#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020)
+#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
+#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
+#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
+#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
+#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
+#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
+#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
+#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
+#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
+#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000)
+
+
+typedef struct _MSG_SEP_REPLY
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Action; /* 04h */
+ U8 Reserved1; /* 05h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 SlotStatus; /* 14h */
+} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
+ SEPReply_t, MPI_POINTER pSEPReply_t;
+
+/* SlotStatus bits for MSG_SEP_REPLY */
+#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
+#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
+#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
+#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
+#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020)
+#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
+#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
+#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
+#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
+#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
+#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
+#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
+#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000)
+#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000)
+
+#endif
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
new file mode 100644
index 0000000..82445d1
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -0,0 +1,770 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_ioc.h
+ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
+ * Creation Date: August 11, 2000
+ *
+ * mpi_ioc.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure.
+ * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY.
+ * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure.
+ * Added _MSG_EVENT_ACK_REPLY structure.
+ * Added _MSG_FW_DOWNLOAD_REPLY structure.
+ * Added _MSG_TOOLBOX_REPLY structure.
+ * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure.
+ * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI,
+ * _LINK_STATUS, _LOOP_STATE and _LOGOUT.
+ * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in
+ * _MSG_EVENT_ACK_REPLY structure to match specification.
+ * 11-02-00 01.01.01 Original release for post 1.0 work.
+ * Added a value for Manufacturer to WhoInit.
+ * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and
+ * removed toolbox message.
+ * 01-09-01 01.01.03 Added event enabled and disabled defines.
+ * Added structures for FwHeader and DataHeader.
+ * Added ImageType to FwUpload reply.
+ * 02-20-01 01.01.04 Started using MPI_POINTER.
+ * 02-27-01 01.01.05 Added event for RAID status change and its event data.
+ * Added IocNumber field to MSG_IOC_FACTS_REPLY.
+ * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER.
+ * Added structure offset comments.
+ * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * New format for FWVersion and ProductId in
+ * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
+ * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ * related structure and defines.
+ * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
+ * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
+ * Replaced a reserved field in MSG_IOC_FACTS_REPLY with
+ * IOCExceptions and changed DataImageSize to reserved.
+ * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and
+ * MPI_FW_UPLOAD_ITYPE_NVDATA.
+ * 09-28-01 01.02.03 Modified Event Data for Integrated RAID.
+ * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field.
+ * 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY.
+ * 05-31-02 01.02.06 Added define for
+ * MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID.
+ * Added AliasIndex to EVENT_DATA_LOGOUT structure.
+ * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_.
+ * 06-26-03 01.02.08 Added new values to the product family defines.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_IOC_H
+#define MPI_IOC_H
+
+
+/*****************************************************************************
+*
+* I O C M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* IOCInit message */
+/****************************************************************************/
+
+typedef struct _MSG_IOC_INIT
+{
+ U8 WhoInit; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Flags; /* 04h */
+ U8 MaxDevices; /* 05h */
+ U8 MaxBuses; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 ReplyFrameSize; /* 0Ch */
+ U8 Reserved1[2]; /* 0Eh */
+ U32 HostMfaHighAddr; /* 10h */
+ U32 SenseBufferHighAddr; /* 14h */
+ U32 ReplyFifoHostSignalingAddr; /* 18h */
+} MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT,
+ IOCInit_t, MPI_POINTER pIOCInit_t;
+
+/* WhoInit values */
+#define MPI_WHOINIT_NO_ONE (0x00)
+#define MPI_WHOINIT_SYSTEM_BIOS (0x01)
+#define MPI_WHOINIT_ROM_BIOS (0x02)
+#define MPI_WHOINIT_PCI_PEER (0x03)
+#define MPI_WHOINIT_HOST_DRIVER (0x04)
+#define MPI_WHOINIT_MANUFACTURER (0x05)
+
+/* Flags values */
+#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01)
+#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
+
+typedef struct _MSG_IOC_INIT_REPLY
+{
+ U8 WhoInit; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Flags; /* 04h */
+ U8 MaxDevices; /* 05h */
+ U8 MaxBuses; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_IOC_INIT_REPLY, MPI_POINTER PTR_MSG_IOC_INIT_REPLY,
+ IOCInitReply_t, MPI_POINTER pIOCInitReply_t;
+
+
+
+/****************************************************************************/
+/* IOC Facts message */
+/****************************************************************************/
+
+typedef struct _MSG_IOC_FACTS
+{
+ U8 Reserved[2]; /* 00h */
+ U8 ChainOffset; /* 01h */
+ U8 Function; /* 02h */
+ U8 Reserved1[3]; /* 03h */
+ U8 MsgFlags; /* 04h */
+ U32 MsgContext; /* 08h */
+} MSG_IOC_FACTS, MPI_POINTER PTR_IOC_FACTS,
+ IOCFacts_t, MPI_POINTER pIOCFacts_t;
+
+typedef struct _MPI_FW_VERSION_STRUCT
+{
+ U8 Dev; /* 00h */
+ U8 Unit; /* 01h */
+ U8 Minor; /* 02h */
+ U8 Major; /* 03h */
+} MPI_FW_VERSION_STRUCT;
+
+typedef union _MPI_FW_VERSION
+{
+ MPI_FW_VERSION_STRUCT Struct;
+ U32 Word;
+} MPI_FW_VERSION;
+
+/* IOC Facts Reply */
+typedef struct _MSG_IOC_FACTS_REPLY
+{
+ U16 MsgVersion; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 HeaderVersion; /* 04h */
+ U8 IOCNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 IOCExceptions; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U8 MaxChainDepth; /* 14h */
+ U8 WhoInit; /* 15h */
+ U8 BlockSize; /* 16h */
+ U8 Flags; /* 17h */
+ U16 ReplyQueueDepth; /* 18h */
+ U16 RequestFrameSize; /* 1Ah */
+ U16 Reserved_0101_FWVersion; /* 1Ch */ /* obsolete 16-bit FWVersion */
+ U16 ProductID; /* 1Eh */
+ U32 CurrentHostMfaHighAddr; /* 20h */
+ U16 GlobalCredits; /* 24h */
+ U8 NumberOfPorts; /* 26h */
+ U8 EventState; /* 27h */
+ U32 CurrentSenseBufferHighAddr; /* 28h */
+ U16 CurReplyFrameSize; /* 2Ch */
+ U8 MaxDevices; /* 2Eh */
+ U8 MaxBuses; /* 2Fh */
+ U32 FWImageSize; /* 30h */
+ U32 IOCCapabilities; /* 34h */
+ MPI_FW_VERSION FWVersion; /* 38h */
+ U16 HighPriorityQueueDepth; /* 3Ch */
+ U16 Reserved2; /* 3Eh */
+} MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY,
+ IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t;
+
+#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
+#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
+
+#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK (0xFF00)
+#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK (0x00FF)
+
+#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
+#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
+#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
+#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
+
+#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
+
+#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00)
+#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01)
+
+#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001)
+#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002)
+#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004)
+#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
+#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
+#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
+#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+
+
+
+/*****************************************************************************
+*
+* P o r t M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Port Facts message and Reply */
+/****************************************************************************/
+
+typedef struct _MSG_PORT_FACTS
+{
+ U8 Reserved[2]; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[2]; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+} MSG_PORT_FACTS, MPI_POINTER PTR_MSG_PORT_FACTS,
+ PortFacts_t, MPI_POINTER pPortFacts_t;
+
+typedef struct _MSG_PORT_FACTS_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U8 Reserved3; /* 14h */
+ U8 PortType; /* 15h */
+ U16 MaxDevices; /* 16h */
+ U16 PortSCSIID; /* 18h */
+ U16 ProtocolFlags; /* 1Ah */
+ U16 MaxPostedCmdBuffers; /* 1Ch */
+ U16 MaxPersistentIDs; /* 1Eh */
+ U16 MaxLanBuckets; /* 20h */
+ U16 Reserved4; /* 22h */
+ U32 Reserved5; /* 24h */
+} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY,
+ PortFactsReply_t, MPI_POINTER pPortFactsReply_t;
+
+
+/* PortTypes values */
+
+#define MPI_PORTFACTS_PORTTYPE_INACTIVE (0x00)
+#define MPI_PORTFACTS_PORTTYPE_SCSI (0x01)
+#define MPI_PORTFACTS_PORTTYPE_FC (0x10)
+#define MPI_PORTFACTS_PORTTYPE_ISCSI (0x20)
+#define MPI_PORTFACTS_PORTTYPE_SAS (0x30)
+
+/* ProtocolFlags values */
+
+#define MPI_PORTFACTS_PROTOCOL_LOGBUSADDR (0x01)
+#define MPI_PORTFACTS_PROTOCOL_LAN (0x02)
+#define MPI_PORTFACTS_PROTOCOL_TARGET (0x04)
+#define MPI_PORTFACTS_PROTOCOL_INITIATOR (0x08)
+
+
+/****************************************************************************/
+/* Port Enable Message */
+/****************************************************************************/
+
+typedef struct _MSG_PORT_ENABLE
+{
+ U8 Reserved[2]; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[2]; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+} MSG_PORT_ENABLE, MPI_POINTER PTR_MSG_PORT_ENABLE,
+ PortEnable_t, MPI_POINTER pPortEnable_t;
+
+typedef struct _MSG_PORT_ENABLE_REPLY
+{
+ U8 Reserved[2]; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[2]; /* 04h */
+ U8 PortNumber; /* 05h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_PORT_ENABLE_REPLY, MPI_POINTER PTR_MSG_PORT_ENABLE_REPLY,
+ PortEnableReply_t, MPI_POINTER pPortEnableReply_t;
+
+
+/*****************************************************************************
+*
+* E v e n t M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Event Notification messages */
+/****************************************************************************/
+
+typedef struct _MSG_EVENT_NOTIFY
+{
+ U8 Switch; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+} MSG_EVENT_NOTIFY, MPI_POINTER PTR_MSG_EVENT_NOTIFY,
+ EventNotification_t, MPI_POINTER pEventNotification_t;
+
+/* Event Notification Reply */
+
+typedef struct _MSG_EVENT_NOTIFY_REPLY
+{
+ U16 EventDataLength; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[2]; /* 04h */
+ U8 AckRequired; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2[2]; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 Event; /* 14h */
+ U32 EventContext; /* 18h */
+ U32 Data[1]; /* 1Ch */
+} MSG_EVENT_NOTIFY_REPLY, MPI_POINTER PTR_MSG_EVENT_NOTIFY_REPLY,
+ EventNotificationReply_t, MPI_POINTER pEventNotificationReply_t;
+
+/* Event Acknowledge */
+
+typedef struct _MSG_EVENT_ACK
+{
+ U8 Reserved[2]; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Event; /* 0Ch */
+ U32 EventContext; /* 10h */
+} MSG_EVENT_ACK, MPI_POINTER PTR_MSG_EVENT_ACK,
+ EventAck_t, MPI_POINTER pEventAck_t;
+
+typedef struct _MSG_EVENT_ACK_REPLY
+{
+ U8 Reserved[2]; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_EVENT_ACK_REPLY, MPI_POINTER PTR_MSG_EVENT_ACK_REPLY,
+ EventAckReply_t, MPI_POINTER pEventAckReply_t;
+
+/* Switch */
+
+#define MPI_EVENT_NOTIFICATION_SWITCH_OFF (0x00)
+#define MPI_EVENT_NOTIFICATION_SWITCH_ON (0x01)
+
+/* Event */
+
+#define MPI_EVENT_NONE (0x00000000)
+#define MPI_EVENT_LOG_DATA (0x00000001)
+#define MPI_EVENT_STATE_CHANGE (0x00000002)
+#define MPI_EVENT_UNIT_ATTENTION (0x00000003)
+#define MPI_EVENT_IOC_BUS_RESET (0x00000004)
+#define MPI_EVENT_EXT_BUS_RESET (0x00000005)
+#define MPI_EVENT_RESCAN (0x00000006)
+#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007)
+#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008)
+#define MPI_EVENT_LOGOUT (0x00000009)
+#define MPI_EVENT_EVENT_CHANGE (0x0000000A)
+#define MPI_EVENT_INTEGRATED_RAID (0x0000000B)
+#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C)
+#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D)
+#define MPI_EVENT_QUEUE_FULL (0x0000000E)
+#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F)
+#define MPI_EVENT_SAS_SES (0x00000010)
+#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011)
+
+/* AckRequired field values */
+
+#define MPI_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
+#define MPI_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
+
+/* EventChange Event data */
+
+typedef struct _EVENT_DATA_EVENT_CHANGE
+{
+ U8 EventState; /* 00h */
+ U8 Reserved; /* 01h */
+ U16 Reserved1; /* 02h */
+} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
+ EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
+
+/* SCSI Event data for Port, Bus and Device forms */
+
+typedef struct _EVENT_DATA_SCSI
+{
+ U8 TargetID; /* 00h */
+ U8 BusPort; /* 01h */
+ U16 Reserved; /* 02h */
+} EVENT_DATA_SCSI, MPI_POINTER PTR_EVENT_DATA_SCSI,
+ EventDataScsi_t, MPI_POINTER pEventDataScsi_t;
+
+/* SCSI Device Status Change Event data */
+
+typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ReasonCode; /* 02h */
+ U8 LUN; /* 03h */
+ U8 ASC; /* 04h */
+ U8 ASCQ; /* 05h */
+ U16 Reserved; /* 06h */
+} EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE,
+ MPI_POINTER PTR_EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE,
+ MpiEventDataScsiDeviceStatusChange_t,
+ MPI_POINTER pMpiEventDataScsiDeviceStatusChange_t;
+
+/* MPI SCSI Device Status Change Event data ReasonCode values */
+#define MPI_EVENT_SCSI_DEV_STAT_RC_ADDED (0x03)
+#define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING (0x04)
+#define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA (0x05)
+
+/* SAS Device Status Change Event data */
+
+typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ReasonCode; /* 02h */
+ U8 Reserved; /* 03h */
+ U8 ASC; /* 04h */
+ U8 ASCQ; /* 05h */
+ U16 DevHandle; /* 06h */
+ U32 DeviceInfo; /* 08h */
+} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ MpiEventDataSasDeviceStatusChange_t,
+ MPI_POINTER pMpiEventDataSasDeviceStatusChange_t;
+
+/* MPI SAS Device Status Change Event data ReasonCode values */
+#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04)
+#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06)
+
+/* SCSI Event data for Queue Full event */
+
+typedef struct _EVENT_DATA_QUEUE_FULL
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U16 CurrentDepth; /* 02h */
+} EVENT_DATA_QUEUE_FULL, MPI_POINTER PTR_EVENT_DATA_QUEUE_FULL,
+ EventDataQueueFull_t, MPI_POINTER pEventDataQueueFull_t;
+
+/* MPI Link Status Change Event data */
+
+typedef struct _EVENT_DATA_LINK_STATUS
+{
+ U8 State; /* 00h */
+ U8 Reserved; /* 01h */
+ U16 Reserved1; /* 02h */
+ U8 Reserved2; /* 04h */
+ U8 Port; /* 05h */
+ U16 Reserved3; /* 06h */
+} EVENT_DATA_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_LINK_STATUS,
+ EventDataLinkStatus_t, MPI_POINTER pEventDataLinkStatus_t;
+
+#define MPI_EVENT_LINK_STATUS_FAILURE (0x00000000)
+#define MPI_EVENT_LINK_STATUS_ACTIVE (0x00000001)
+
+/* MPI Loop State Change Event data */
+
+typedef struct _EVENT_DATA_LOOP_STATE
+{
+ U8 Character4; /* 00h */
+ U8 Character3; /* 01h */
+ U8 Type; /* 02h */
+ U8 Reserved; /* 03h */
+ U8 Reserved1; /* 04h */
+ U8 Port; /* 05h */
+ U16 Reserved2; /* 06h */
+} EVENT_DATA_LOOP_STATE, MPI_POINTER PTR_EVENT_DATA_LOOP_STATE,
+ EventDataLoopState_t, MPI_POINTER pEventDataLoopState_t;
+
+#define MPI_EVENT_LOOP_STATE_CHANGE_LIP (0x0001)
+#define MPI_EVENT_LOOP_STATE_CHANGE_LPE (0x0002)
+#define MPI_EVENT_LOOP_STATE_CHANGE_LPB (0x0003)
+
+/* MPI LOGOUT Event data */
+
+typedef struct _EVENT_DATA_LOGOUT
+{
+ U32 NPortID; /* 00h */
+ U8 AliasIndex; /* 04h */
+ U8 Port; /* 05h */
+ U16 Reserved1; /* 06h */
+} EVENT_DATA_LOGOUT, MPI_POINTER PTR_EVENT_DATA_LOGOUT,
+ EventDataLogout_t, MPI_POINTER pEventDataLogout_t;
+
+#define MPI_EVENT_LOGOUT_ALL_ALIASES (0xFF)
+
+
+/* MPI Integrated RAID Event data */
+
+typedef struct _EVENT_DATA_RAID
+{
+ U8 VolumeID; /* 00h */
+ U8 VolumeBus; /* 01h */
+ U8 ReasonCode; /* 02h */
+ U8 PhysDiskNum; /* 03h */
+ U8 ASC; /* 04h */
+ U8 ASCQ; /* 05h */
+ U16 Reserved; /* 06h */
+ U32 SettingsStatus; /* 08h */
+} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID,
+ MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t;
+
+/* MPI Integrated RAID Event data ReasonCode values */
+#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00)
+#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01)
+#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02)
+#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03)
+#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04)
+#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05)
+#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06)
+#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07)
+#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08)
+#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09)
+#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A)
+#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B)
+
+
+/*****************************************************************************
+*
+* F i r m w a r e L o a d M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Firmware Download message and associated structures */
+/****************************************************************************/
+
+typedef struct _MSG_FW_DOWNLOAD
+{
+ U8 ImageType; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ SGE_MPI_UNION SGL; /* 0Ch */
+} MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD,
+ FWDownload_t, MPI_POINTER pFWDownload_t;
+
+#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00)
+#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01)
+#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
+#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
+#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
+
+
+typedef struct _FWDownloadTCSGE
+{
+ U8 Reserved; /* 00h */
+ U8 ContextSize; /* 01h */
+ U8 DetailsLength; /* 02h */
+ U8 Flags; /* 03h */
+ U32 Reserved_0100_Checksum; /* 04h */ /* obsolete Checksum */
+ U32 ImageOffset; /* 08h */
+ U32 ImageSize; /* 0Ch */
+} FW_DOWNLOAD_TCSGE, MPI_POINTER PTR_FW_DOWNLOAD_TCSGE,
+ FWDownloadTCSGE_t, MPI_POINTER pFWDownloadTCSGE_t;
+
+/* Firmware Download reply */
+typedef struct _MSG_FW_DOWNLOAD_REPLY
+{
+ U8 ImageType; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_FW_DOWNLOAD_REPLY, MPI_POINTER PTR_MSG_FW_DOWNLOAD_REPLY,
+ FWDownloadReply_t, MPI_POINTER pFWDownloadReply_t;
+
+
+/****************************************************************************/
+/* Firmware Upload message and associated structures */
+/****************************************************************************/
+
+typedef struct _MSG_FW_UPLOAD
+{
+ U8 ImageType; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ SGE_MPI_UNION SGL; /* 0Ch */
+} MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD,
+ FWUpload_t, MPI_POINTER pFWUpload_t;
+
+#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00)
+#define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
+#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
+#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
+#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
+
+typedef struct _FWUploadTCSGE
+{
+ U8 Reserved; /* 00h */
+ U8 ContextSize; /* 01h */
+ U8 DetailsLength; /* 02h */
+ U8 Flags; /* 03h */
+ U32 Reserved1; /* 04h */
+ U32 ImageOffset; /* 08h */
+ U32 ImageSize; /* 0Ch */
+} FW_UPLOAD_TCSGE, MPI_POINTER PTR_FW_UPLOAD_TCSGE,
+ FWUploadTCSGE_t, MPI_POINTER pFWUploadTCSGE_t;
+
+/* Firmware Upload reply */
+typedef struct _MSG_FW_UPLOAD_REPLY
+{
+ U8 ImageType; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved1[3]; /* 04h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ActualImageSize; /* 14h */
+} MSG_FW_UPLOAD_REPLY, MPI_POINTER PTR_MSG_FW_UPLOAD_REPLY,
+ FWUploadReply_t, MPI_POINTER pFWUploadReply_t;
+
+
+typedef struct _MPI_FW_HEADER
+{
+ U32 ArmBranchInstruction0; /* 00h */
+ U32 Signature0; /* 04h */
+ U32 Signature1; /* 08h */
+ U32 Signature2; /* 0Ch */
+ U32 ArmBranchInstruction1; /* 10h */
+ U32 ArmBranchInstruction2; /* 14h */
+ U32 Reserved; /* 18h */
+ U32 Checksum; /* 1Ch */
+ U16 VendorId; /* 20h */
+ U16 ProductId; /* 22h */
+ MPI_FW_VERSION FWVersion; /* 24h */
+ U32 SeqCodeVersion; /* 28h */
+ U32 ImageSize; /* 2Ch */
+ U32 NextImageHeaderOffset; /* 30h */
+ U32 LoadStartAddress; /* 34h */
+ U32 IopResetVectorValue; /* 38h */
+ U32 IopResetRegAddr; /* 3Ch */
+ U32 VersionNameWhat; /* 40h */
+ U8 VersionName[32]; /* 44h */
+ U32 VendorNameWhat; /* 64h */
+ U8 VendorName[32]; /* 68h */
+} MPI_FW_HEADER, MPI_POINTER PTR_MPI_FW_HEADER,
+ MpiFwHeader_t, MPI_POINTER pMpiFwHeader_t;
+
+#define MPI_FW_HEADER_WHAT_SIGNATURE (0x29232840)
+
+/* defines for using the ProductId field */
+#define MPI_FW_HEADER_PID_TYPE_MASK (0xF000)
+#define MPI_FW_HEADER_PID_TYPE_SCSI (0x0000)
+#define MPI_FW_HEADER_PID_TYPE_FC (0x1000)
+#define MPI_FW_HEADER_PID_TYPE_SAS (0x2000)
+
+#define MPI_FW_HEADER_SIGNATURE_0 (0x5AEAA55A)
+#define MPI_FW_HEADER_SIGNATURE_1 (0xA55AEAA5)
+#define MPI_FW_HEADER_SIGNATURE_2 (0x5AA55AEA)
+
+#define MPI_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI (0x0100)
+#define MPI_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
+#define MPI_FW_HEADER_PID_PROD_TARGET_SCSI (0x0300)
+#define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400)
+#define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500)
+#define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600)
+
+#define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF)
+/* SCSI */
+#define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI (0x0001)
+#define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI (0x0002)
+#define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI (0x0003)
+#define MPI_FW_HEADER_PID_FAMILY_1030C0_SCSI (0x0004)
+#define MPI_FW_HEADER_PID_FAMILY_1020A0_SCSI (0x0005)
+#define MPI_FW_HEADER_PID_FAMILY_1020B0_SCSI (0x0006)
+#define MPI_FW_HEADER_PID_FAMILY_1020B1_SCSI (0x0007)
+#define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI (0x0008)
+#define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI (0x0009)
+#define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI (0x000A)
+#define MPI_FW_HEADER_PID_FAMILY_1030TA0_SCSI (0x000B)
+#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI (0x000C)
+/* Fibre Channel */
+#define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000)
+#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001)
+#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002)
+#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003)
+#define MPI_FW_HEADER_PID_FAMILY_949_FC (0x0004)
+#define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005)
+/* SAS */
+#define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001)
+
+typedef struct _MPI_EXT_IMAGE_HEADER
+{
+ U8 ImageType; /* 00h */
+ U8 Reserved; /* 01h */
+ U16 Reserved1; /* 02h */
+ U32 Checksum; /* 04h */
+ U32 ImageSize; /* 08h */
+ U32 NextImageHeaderOffset; /* 0Ch */
+ U32 LoadStartAddress; /* 10h */
+ U32 Reserved2; /* 14h */
+} MPI_EXT_IMAGE_HEADER, MPI_POINTER PTR_MPI_EXT_IMAGE_HEADER,
+ MpiExtImageHeader_t, MPI_POINTER pMpiExtImageHeader_t;
+
+/* defines for the ImageType field */
+#define MPI_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI_EXT_IMAGE_TYPE_FW (0x01)
+#define MPI_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
+
+#endif
diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h
new file mode 100644
index 0000000..3ced127
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_lan.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_lan.h
+ * Title: MPI LAN messages and structures
+ * Creation Date: June 30, 2000
+ *
+ * mpi_lan.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY.
+ * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
+ * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions.
+ * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec.
+ * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal.
+ * Changed transaction context usage to bucket/buffer.
+ * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
+ * to lan private header file
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 02-20-01 01.01.02 Started using MPI_POINTER.
+ * 03-27-01 01.01.03 Added structure offset comments.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_LAN_H
+#define MPI_LAN_H
+
+
+/******************************************************************************
+*
+* L A N M e s s a g e s
+*
+*******************************************************************************/
+
+/* LANSend messages */
+
+typedef struct _MSG_LAN_SEND_REQUEST
+{
+ U16 Reserved; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ SGE_MPI_UNION SG_List[1]; /* 0Ch */
+} MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST,
+ LANSendRequest_t, MPI_POINTER pLANSendRequest_t;
+
+
+typedef struct _MSG_LAN_SEND_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved2; /* 04h */
+ U8 NumberOfContexts; /* 05h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 BufferContext; /* 14h */
+} MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY,
+ LANSendReply_t, MPI_POINTER pLANSendReply_t;
+
+
+/* LANReceivePost */
+
+typedef struct _MSG_LAN_RECEIVE_POST_REQUEST
+{
+ U16 Reserved; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 BucketCount; /* 0Ch */
+ SGE_MPI_UNION SG_List[1]; /* 10h */
+} MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST,
+ LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t;
+
+
+typedef struct _MSG_LAN_RECEIVE_POST_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 Reserved2; /* 04h */
+ U8 NumberOfContexts; /* 05h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 BucketsRemaining; /* 14h */
+ U32 PacketOffset; /* 18h */
+ U32 PacketLength; /* 1Ch */
+ U32 BucketContext[1]; /* 20h */
+} MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY,
+ LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t;
+
+
+/* LANReset */
+
+typedef struct _MSG_LAN_RESET_REQUEST
+{
+ U16 Reserved; /* 00h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 PortNumber; /* 05h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+} MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST,
+ LANResetRequest_t, MPI_POINTER pLANResetRequest_t;
+
+
+typedef struct _MSG_LAN_RESET_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 PortNumber; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY,
+ LANResetReply_t, MPI_POINTER pLANResetReply_t;
+
+
+/****************************************************************************/
+/* LAN Context Reply defines and macros */
+/****************************************************************************/
+
+#define LAN_REPLY_PACKET_LENGTH_MASK (0x0000FFFF)
+#define LAN_REPLY_PACKET_LENGTH_SHIFT (0)
+#define LAN_REPLY_BUCKET_CONTEXT_MASK (0x07FF0000)
+#define LAN_REPLY_BUCKET_CONTEXT_SHIFT (16)
+#define LAN_REPLY_BUFFER_CONTEXT_MASK (0x07FFFFFF)
+#define LAN_REPLY_BUFFER_CONTEXT_SHIFT (0)
+#define LAN_REPLY_FORM_MASK (0x18000000)
+#define LAN_REPLY_FORM_RECEIVE_SINGLE (0x00)
+#define LAN_REPLY_FORM_RECEIVE_MULTIPLE (0x01)
+#define LAN_REPLY_FORM_SEND_SINGLE (0x02)
+#define LAN_REPLY_FORM_MESSAGE_CONTEXT (0x03)
+#define LAN_REPLY_FORM_SHIFT (27)
+
+#define GET_LAN_PACKET_LENGTH(x) (((x) & LAN_REPLY_PACKET_LENGTH_MASK) \
+ >> LAN_REPLY_PACKET_LENGTH_SHIFT)
+
+#define SET_LAN_PACKET_LENGTH(x, lth) \
+ ((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) | \
+ (((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) & \
+ LAN_REPLY_PACKET_LENGTH_MASK))
+
+#define GET_LAN_BUCKET_CONTEXT(x) (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK) \
+ >> LAN_REPLY_BUCKET_CONTEXT_SHIFT)
+
+#define SET_LAN_BUCKET_CONTEXT(x, ctx) \
+ ((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) | \
+ (((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) & \
+ LAN_REPLY_BUCKET_CONTEXT_MASK))
+
+#define GET_LAN_BUFFER_CONTEXT(x) (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK) \
+ >> LAN_REPLY_BUFFER_CONTEXT_SHIFT)
+
+#define SET_LAN_BUFFER_CONTEXT(x, ctx) \
+ ((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) | \
+ (((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) & \
+ LAN_REPLY_BUFFER_CONTEXT_MASK))
+
+#define GET_LAN_FORM(x) (((x) & LAN_REPLY_FORM_MASK) \
+ >> LAN_REPLY_FORM_SHIFT)
+
+#define SET_LAN_FORM(x, frm) \
+ ((x) = ((x) & ~LAN_REPLY_FORM_MASK) | \
+ (((frm) << LAN_REPLY_FORM_SHIFT) & \
+ LAN_REPLY_FORM_MASK))
+
+
+/****************************************************************************/
+/* LAN Current Device State defines */
+/****************************************************************************/
+
+#define MPI_LAN_DEVICE_STATE_RESET (0x00)
+#define MPI_LAN_DEVICE_STATE_OPERATIONAL (0x01)
+
+
+/****************************************************************************/
+/* LAN Loopback defines */
+/****************************************************************************/
+
+#define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION (0x01)
+
+#endif
+
diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h
new file mode 100644
index 0000000..9580a9d
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_raid.h
@@ -0,0 +1,232 @@
+/*
+ * Copyright (c) 2001-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_raid.h
+ * Title: MPI RAID message and structures
+ * Creation Date: February 27, 2001
+ *
+ * mpi_raid.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 02-27-01 01.01.01 Original release for this file.
+ * 03-27-01 01.01.02 Added structure offset comments.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes.
+ * 10-04-01 01.02.03 Added ActionData defines for
+ * MPI_RAID_ACTION_DELETE_VOLUME action.
+ * 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
+ * 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
+ * 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
+ * MPI_RAID_ACTION_INACTIVATE_VOLUME, and
+ * MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
+ * 07-12-02 01.02.07 Added structures for Mailbox request and reply.
+ * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST.
+ * 04-01-03 01.02.09 New action data option flag for
+ * MPI_RAID_ACTION_DELETE_VOLUME.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_RAID_H
+#define MPI_RAID_H
+
+
+/******************************************************************************
+*
+* R A I D M e s s a g e s
+*
+*******************************************************************************/
+
+
+/****************************************************************************/
+/* RAID Action Request */
+/****************************************************************************/
+
+typedef struct _MSG_RAID_ACTION
+{
+ U8 Action; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 VolumeID; /* 04h */
+ U8 VolumeBus; /* 05h */
+ U8 PhysDiskNum; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved2; /* 0Ch */
+ U32 ActionDataWord; /* 10h */
+ SGE_SIMPLE_UNION ActionDataSGE; /* 14h */
+} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST,
+ MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t;
+
+
+/* RAID Action request Action values */
+
+#define MPI_RAID_ACTION_STATUS (0x00)
+#define MPI_RAID_ACTION_INDICATOR_STRUCT (0x01)
+#define MPI_RAID_ACTION_CREATE_VOLUME (0x02)
+#define MPI_RAID_ACTION_DELETE_VOLUME (0x03)
+#define MPI_RAID_ACTION_DISABLE_VOLUME (0x04)
+#define MPI_RAID_ACTION_ENABLE_VOLUME (0x05)
+#define MPI_RAID_ACTION_QUIESCE_PHYS_IO (0x06)
+#define MPI_RAID_ACTION_ENABLE_PHYS_IO (0x07)
+#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS (0x08)
+#define MPI_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
+#define MPI_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
+#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS (0x0C)
+#define MPI_RAID_ACTION_CREATE_PHYSDISK (0x0D)
+#define MPI_RAID_ACTION_DELETE_PHYSDISK (0x0E)
+#define MPI_RAID_ACTION_FAIL_PHYSDISK (0x0F)
+#define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10)
+#define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11)
+#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12)
+
+/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
+#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT (0x00000002)
+
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS (0x00000000)
+#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS (0x00000001)
+
+#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
+#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002)
+
+/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
+
+
+/* RAID Action reply message */
+
+typedef struct _MSG_RAID_ACTION_REPLY
+{
+ U8 Action; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 VolumeID; /* 04h */
+ U8 VolumeBus; /* 05h */
+ U8 PhysDiskNum; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 ActionStatus; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 VolumeStatus; /* 14h */
+ U32 ActionData; /* 18h */
+} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY,
+ MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t;
+
+
+/* RAID Volume reply ActionStatus values */
+
+#define MPI_RAID_ACTION_ASTATUS_SUCCESS (0x0000)
+#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION (0x0001)
+#define MPI_RAID_ACTION_ASTATUS_FAILURE (0x0002)
+#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS (0x0003)
+
+
+/* RAID Volume reply RAID Volume Indicator structure */
+
+typedef struct _MPI_RAID_VOL_INDICATOR
+{
+ U64 TotalBlocks; /* 00h */
+ U64 BlocksRemaining; /* 08h */
+} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR,
+ MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t;
+
+
+/****************************************************************************/
+/* SCSI IO RAID Passthrough Request */
+/****************************************************************************/
+
+typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST
+{
+ U8 PhysDiskNum; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Control; /* 14h */
+ U8 CDB[16]; /* 18h */
+ U32 DataLength; /* 28h */
+ U32 SenseBufferLowAddr; /* 2Ch */
+ SGE_IO_UNION SGL; /* 30h */
+} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST,
+ SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t;
+
+
+/* SCSI IO RAID Passthrough reply structure */
+
+typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
+{
+ U8 PhysDiskNum; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 SCSIStatus; /* 0Ch */
+ U8 SCSIState; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferCount; /* 14h */
+ U32 SenseCount; /* 18h */
+ U32 ResponseInfo; /* 1Ch */
+} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY,
+ SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t;
+
+
+/****************************************************************************/
+/* Mailbox reqeust structure */
+/****************************************************************************/
+
+typedef struct _MSG_MAILBOX_REQUEST
+{
+ U16 Reserved1;
+ U8 ChainOffset;
+ U8 Function;
+ U16 Reserved2;
+ U8 Reserved3;
+ U8 MsgFlags;
+ U32 MsgContext;
+ U8 Command[10];
+ U16 Reserved4;
+ SGE_IO_UNION SGL;
+} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST,
+ MailboxRequest_t, MPI_POINTER pMailboxRequest_t;
+
+
+/* Mailbox reply structure */
+typedef struct _MSG_MAILBOX_REPLY
+{
+ U16 Reserved1; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 MailboxStatus; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 Reserved4; /* 14h */
+} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY,
+ MailboxReply_t, MPI_POINTER pMailboxReply_t;
+
+#endif
+
+
+
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
new file mode 100644
index 0000000..cb878f9
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_sas.h
+ * Title: MPI Serial Attached SCSI structures and definitions
+ * Creation Date: April 23, 2003
+ *
+ * mpi_sas.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * xx-yy-zz 01.05.01 Original release.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_SAS_H
+#define MPI_SAS_H
+
+/*****************************************************************************
+*
+* S e r i a l A t t a c h e d S C S I M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Serial Management Protocol Passthrough Request */
+/****************************************************************************/
+
+typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
+{
+ U8 PassthroughFlags; /* 00h */
+ U8 PhysicalPort; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 RequestDataLength; /* 04h */
+ U8 ConnectionRate; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved1; /* 0Ch */
+ U64 SASAddress; /* 10h */
+ U32 Reserved2; /* 18h */
+ U32 Reserved3; /* 1Ch */
+ SGE_SIMPLE_UNION SGL; /* 20h */
+} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
+ SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
+
+#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
+
+#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
+
+
+/* Serial Management Protocol Passthrough Reply */
+typedef struct _MSG_SMP_PASSTHROUGH_REPLY
+{
+ U8 PassthroughFlags; /* 00h */
+ U8 PhysicalPort; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 ResponseDataLength; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2; /* 0Ch */
+ U8 SASStatus; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 Reserved3; /* 14h */
+ U8 ResponseData[4]; /* 18h */
+} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
+ SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
+
+#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
+
+/* values for the SASStatus field */
+#define MPI_SASSTATUS_SUCCESS (0x00)
+#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
+#define MPI_SASSTATUS_INVALID_FRAME (0x02)
+#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
+#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
+#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
+#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
+#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
+#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
+#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
+#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
+#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
+#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
+#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
+#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
+#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
+#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
+#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
+#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
+#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
+#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
+
+
+/*
+ * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ * data and SAS IO Unit Configuration pages.
+ */
+#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
+#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
+#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
+#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
+#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
+#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
+#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
+#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
+#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
+#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
+#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
+
+#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
+#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
+#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
+#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
+#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
+
+
+/****************************************************************************/
+/* SAS IO Unit Control Request */
+/****************************************************************************/
+
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
+{
+ U8 Operation; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 TargetID; /* 0Ch */
+ U8 Bus; /* 0Dh */
+ U8 PhyNum; /* 0Eh */
+ U8 Reserved4; /* 0Fh */
+ U32 Reserved5; /* 10h */
+ U64 SASAddress; /* 14h */
+ U32 Reserved6; /* 1Ch */
+} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
+ SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
+
+/* values for the ... field */
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
+#define MPI_SAS_OP_CLEAR_ALL (0x02)
+#define MPI_SAS_OP_MAP (0x03)
+#define MPI_SAS_OP_MOVE (0x04)
+#define MPI_SAS_OP_CLEAR (0x05)
+#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+
+
+/* SAS IO Unit Control Reply */
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
+{
+ U8 Operation; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
+ SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
+
+#endif
+
+
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
new file mode 100644
index 0000000..804dc85
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_targ.h
+ * Title: MPI Target mode messages and structures
+ * Creation Date: June 22, 2000
+ *
+ * mpi_targ.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
+ * Corrected DECSRIPTOR typo to DESCRIPTOR.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * Modified target mode to use IoIndex instead of
+ * HostIndex and IocIndex. Added Alias.
+ * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
+ * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
+ * 02-20-01 01.01.03 Started using MPI_POINTER.
+ * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
+ * MPI_TARGET_FCP_CMD_BUFFER.
+ * 03-27-01 01.01.04 Added structure offset comments.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU.
+ * Added PriorityReason field to some replies and
+ * defined more PriorityReason codes.
+ * Added some defines for to support previous version
+ * of MPI.
+ * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY.
+ * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY.
+ * 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper
+ * byte ordering.
+ * 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
+ * one bit.
+ * Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
+ * 09-16-02 01.02.07 Added flags for confirmed completion.
+ * Added PRIORITY_REASON_TARGET_BUSY.
+ * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
+ * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_TARG_H
+#define MPI_TARG_H
+
+
+/******************************************************************************
+*
+* S C S I T a r g e t M e s s a g e s
+*
+*******************************************************************************/
+
+typedef struct _CMD_BUFFER_DESCRIPTOR
+{
+ U16 IoIndex; /* 00h */
+ U16 Reserved; /* 02h */
+ union /* 04h */
+ {
+ U32 PhysicalAddress32;
+ U64 PhysicalAddress64;
+ } u;
+} CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR,
+ CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t;
+
+
+/****************************************************************************/
+/* Target Command Buffer Post Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST
+{
+ U8 BufferPostFlags; /* 00h */
+ U8 BufferCount; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 BufferLength; /* 04h */
+ U8 Reserved; /* 05h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ CMD_BUFFER_DESCRIPTOR Buffer[1]; /* 0Ch */
+} MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST,
+ TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t;
+
+#define CMD_BUFFER_POST_FLAGS_PORT_MASK (0x01)
+#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK (0x80)
+#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32 (0)
+#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64 (1)
+#define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR (0x80)
+
+#define CMD_BUFFER_POST_IO_INDEX_MASK (0x00003FFF)
+#define CMD_BUFFER_POST_IO_INDEX_MASK_0100 (0x000003FF) /* obsolete */
+
+
+typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY
+{
+ U8 BufferPostFlags; /* 00h */
+ U8 BufferCount; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 BufferLength; /* 04h */
+ U8 Reserved; /* 05h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved2; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY,
+ TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t;
+
+/* the following structure is obsolete as of MPI v1.2 */
+typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 PriorityReason; /* 0Ch */
+ U8 Reserved3; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ReplyWord; /* 14h */
+} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY,
+ PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t;
+
+#define PRIORITY_REASON_NO_DISCONNECT (0x00)
+#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01)
+#define PRIORITY_REASON_CMD_PARITY_ERR (0x02)
+#define PRIORITY_REASON_MSG_OUT_PARITY_ERR (0x03)
+#define PRIORITY_REASON_LQ_CRC_ERR (0x04)
+#define PRIORITY_REASON_CMD_CRC_ERR (0x05)
+#define PRIORITY_REASON_PROTOCOL_ERR (0x06)
+#define PRIORITY_REASON_DATA_OUT_PARITY_ERR (0x07)
+#define PRIORITY_REASON_DATA_OUT_CRC_ERR (0x08)
+#define PRIORITY_REASON_TARGET_BUSY (0x09)
+#define PRIORITY_REASON_UNKNOWN (0xFF)
+
+
+typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 PriorityReason; /* 0Ch */
+ U8 Reserved3; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ReplyWord; /* 14h */
+} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
+ MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
+ TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t;
+
+
+typedef struct _MPI_TARGET_FCP_CMD_BUFFER
+{
+ U8 FcpLun[8]; /* 00h */
+ U8 FcpCntl[4]; /* 08h */
+ U8 FcpCdb[16]; /* 0Ch */
+ U32 FcpDl; /* 1Ch */
+ U8 AliasIndex; /* 20h */
+ U8 Reserved1; /* 21h */
+ U16 OptionalOxid; /* 22h */
+} MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER,
+ MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer;
+
+
+typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER
+{
+ /* SPI L_Q information unit */
+ U8 L_QType; /* 00h */
+ U8 Reserved; /* 01h */
+ U16 Tag; /* 02h */
+ U8 LogicalUnitNumber[8]; /* 04h */
+ U32 DataLength; /* 0Ch */
+ /* SPI command information unit */
+ U8 ReservedFirstByteOfCommandIU; /* 10h */
+ U8 TaskAttribute; /* 11h */
+ U8 TaskManagementFlags; /* 12h */
+ U8 AdditionalCDBLength; /* 13h */
+ U8 CDB[16]; /* 14h */
+ /* Alias ID */
+ U8 AliasID; /* 24h */
+ U8 Reserved1; /* 25h */
+ U16 Reserved2; /* 26h */
+} MPI_TARGET_SCSI_SPI_CMD_BUFFER,
+ MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER,
+ MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer;
+
+
+/****************************************************************************/
+/* Target Assist Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_ASSIST_REQUEST
+{
+ U8 StatusCode; /* 00h */
+ U8 TargetAssistFlags; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 QueueTag; /* 04h */
+ U8 Reserved; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ReplyWord; /* 0Ch */
+ U8 LUN[8]; /* 10h */
+ U32 RelativeOffset; /* 18h */
+ U32 DataLength; /* 1Ch */
+ SGE_IO_UNION SGL[1]; /* 20h */
+} MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST,
+ TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t;
+
+#define TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01)
+#define TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02)
+#define TARGET_ASSIST_FLAGS_HIGH_PRIORITY (0x04)
+#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08)
+#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80)
+
+
+typedef struct _MSG_TARGET_ERROR_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 PriorityReason; /* 0Ch */
+ U8 Reserved3; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 ReplyWord; /* 14h */
+ U32 TransferCount; /* 18h */
+} MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY,
+ TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t;
+
+
+/****************************************************************************/
+/* Target Status Send Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_STATUS_SEND_REQUEST
+{
+ U8 StatusCode; /* 00h */
+ U8 StatusFlags; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 QueueTag; /* 04h */
+ U8 Reserved; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ReplyWord; /* 0Ch */
+ U8 LUN[8]; /* 10h */
+ SGE_SIMPLE_UNION StatusDataSGE; /* 18h */
+} MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST,
+ TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t;
+
+#define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS (0x01)
+#define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY (0x04)
+#define TARGET_STATUS_SEND_FLAGS_CONFIRMED (0x08)
+#define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER (0x80)
+
+/*
+ * NOTE: FCP_RSP data is big-endian. When used on a little-endian system, this
+ * structure properly orders the bytes.
+ */
+typedef struct _MPI_TARGET_FCP_RSP_BUFFER
+{
+ U8 Reserved0[8]; /* 00h */
+ U8 Reserved1[2]; /* 08h */
+ U8 FcpFlags; /* 0Ah */
+ U8 FcpStatus; /* 0Bh */
+ U32 FcpResid; /* 0Ch */
+ U32 FcpSenseLength; /* 10h */
+ U32 FcpResponseLength; /* 14h */
+ U8 FcpResponseData[8]; /* 18h */
+ U8 FcpSenseData[32]; /* Pad to 64 bytes */ /* 20h */
+} MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER,
+ MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer;
+
+/*
+ * NOTE: The SPI status IU is big-endian. When used on a little-endian system,
+ * this structure properly orders the bytes.
+ */
+typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU
+{
+ U8 Reserved0; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 Valid; /* 02h */
+ U8 Status; /* 03h */
+ U32 SenseDataListLength; /* 04h */
+ U32 PktFailuresListLength; /* 08h */
+ U8 SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */
+} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU,
+ TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t;
+
+/****************************************************************************/
+/* Target Mode Abort Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_MODE_ABORT_REQUEST
+{
+ U8 AbortType; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ReplyWord; /* 0Ch */
+ U32 MsgContextToAbort; /* 10h */
+} MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT,
+ TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t;
+
+#define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS (0x00)
+#define TARGET_MODE_ABORT_TYPE_ALL_IO (0x01)
+#define TARGET_MODE_ABORT_TYPE_EXACT_IO (0x02)
+#define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST (0x03)
+
+/* Target Mode Abort Reply */
+
+typedef struct _MSG_TARGET_MODE_ABORT_REPLY
+{
+ U16 Reserved; /* 00h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 AbortCount; /* 14h */
+} MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY,
+ TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t;
+
+
+/****************************************************************************/
+/* Target Mode Context Reply */
+/****************************************************************************/
+
+#define TARGET_MODE_REPLY_IO_INDEX_MASK (0x00003FFF)
+#define TARGET_MODE_REPLY_IO_INDEX_SHIFT (0)
+#define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK (0x03FFC000)
+#define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14)
+#define TARGET_MODE_REPLY_ALIAS_MASK (0x04000000)
+#define TARGET_MODE_REPLY_ALIAS_SHIFT (26)
+#define TARGET_MODE_REPLY_PORT_MASK (0x10000000)
+#define TARGET_MODE_REPLY_PORT_SHIFT (28)
+
+
+#define GET_IO_INDEX(x) (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK) \
+ >> TARGET_MODE_REPLY_IO_INDEX_SHIFT)
+
+#define SET_IO_INDEX(t, i) \
+ ((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) | \
+ (((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) & \
+ TARGET_MODE_REPLY_IO_INDEX_MASK))
+
+#define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \
+ >> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT)
+
+#define SET_INITIATOR_INDEX(t, ii) \
+ ((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) | \
+ (((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) & \
+ TARGET_MODE_REPLY_INITIATOR_INDEX_MASK))
+
+#define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK) \
+ >> TARGET_MODE_REPLY_ALIAS_SHIFT)
+
+#define SET_ALIAS(t, a) ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) | \
+ (((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) & \
+ TARGET_MODE_REPLY_ALIAS_MASK))
+
+#define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK) \
+ >> TARGET_MODE_REPLY_PORT_SHIFT)
+
+#define SET_PORT(t, p) ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) | \
+ (((p) << TARGET_MODE_REPLY_PORT_SHIFT) & \
+ TARGET_MODE_REPLY_PORT_MASK))
+
+/* the following obsolete values are for MPI v1.0 support */
+#define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX (0x000003FF)
+#define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX (0)
+#define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX (0x001FF800)
+#define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX (11)
+#define TARGET_MODE_REPLY_0100_PORT_MASK (0x00400000)
+#define TARGET_MODE_REPLY_0100_PORT_SHIFT (22)
+#define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX (0x1F800000)
+#define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23)
+
+#define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \
+ >> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX)
+
+#define SET_HOST_INDEX_0100(t, hi) \
+ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) | \
+ (((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) & \
+ TARGET_MODE_REPLY_0100_MASK_HOST_INDEX))
+
+#define GET_IOC_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \
+ >> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX)
+
+#define SET_IOC_INDEX_0100(t, ii) \
+ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) | \
+ (((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) & \
+ TARGET_MODE_REPLY_0100_MASK_IOC_INDEX))
+
+#define GET_INITIATOR_INDEX_0100(x) \
+ (((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) \
+ >> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX)
+
+#define SET_INITIATOR_INDEX_0100(t, ii) \
+ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) | \
+ (((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) & \
+ TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX))
+
+
+#endif
+
diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h
new file mode 100644
index 0000000..536d197
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_tool.h
@@ -0,0 +1,305 @@
+/*
+ * Copyright (c) 2001-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_tool.h
+ * Title: MPI Toolbox structures and definitions
+ * Creation Date: July 30, 2001
+ *
+ * mpi_tool.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 08-08-01 01.02.01 Original release.
+ * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_TOOL_H
+#define MPI_TOOL_H
+
+#define MPI_TOOLBOX_CLEAN_TOOL (0x00)
+#define MPI_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
+#define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
+#define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
+#define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04)
+
+
+/****************************************************************************/
+/* Toolbox reply */
+/****************************************************************************/
+
+typedef struct _MSG_TOOLBOX_REPLY
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved3; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_TOOLBOX_REPLY, MPI_POINTER PTR_MSG_TOOLBOX_REPLY,
+ ToolboxReply_t, MPI_POINTER pToolboxReply_t;
+
+
+/****************************************************************************/
+/* Toolbox Clean Tool request */
+/****************************************************************************/
+
+typedef struct _MSG_TOOLBOX_CLEAN_REQUEST
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Flags; /* 0Ch */
+} MSG_TOOLBOX_CLEAN_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_CLEAN_REQUEST,
+ ToolboxCleanRequest_t, MPI_POINTER pToolboxCleanRequest_t;
+
+#define MPI_TOOLBOX_CLEAN_NVSRAM (0x00000001)
+#define MPI_TOOLBOX_CLEAN_SEEPROM (0x00000002)
+#define MPI_TOOLBOX_CLEAN_FLASH (0x00000004)
+#define MPI_TOOLBOX_CLEAN_BOOTLOADER (0x04000000)
+#define MPI_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
+#define MPI_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
+#define MPI_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
+#define MPI_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
+#define MPI_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
+
+
+/****************************************************************************/
+/* Toolbox Memory Move request */
+/****************************************************************************/
+
+typedef struct _MSG_TOOLBOX_MEM_MOVE_REQUEST
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ SGE_SIMPLE_UNION SGL; /* 0Ch */
+} MSG_TOOLBOX_MEM_MOVE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_MEM_MOVE_REQUEST,
+ ToolboxMemMoveRequest_t, MPI_POINTER pToolboxMemMoveRequest_t;
+
+
+/****************************************************************************/
+/* Toolbox Diagnostic Data Upload request */
+/****************************************************************************/
+
+typedef struct _MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Flags; /* 0Ch */
+ U32 Reserved3; /* 10h */
+ SGE_SIMPLE_UNION SGL; /* 14h */
+} MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+ ToolboxDiagDataUploadRequest_t, MPI_POINTER pToolboxDiagDataUploadRequest_t;
+
+typedef struct _DIAG_DATA_UPLOAD_HEADER
+{
+ U32 DiagDataLength; /* 00h */
+ U8 FormatCode; /* 04h */
+ U8 Reserved; /* 05h */
+ U16 Reserved1; /* 06h */
+} DIAG_DATA_UPLOAD_HEADER, MPI_POINTER PTR_DIAG_DATA_UPLOAD_HEADER,
+ DiagDataUploadHeader_t, MPI_POINTER pDiagDataUploadHeader_t;
+
+#define MPI_TB_DIAG_FORMAT_SCSI_PRINTF_1 (0x01)
+#define MPI_TB_DIAG_FORMAT_SCSI_2 (0x02)
+#define MPI_TB_DIAG_FORMAT_SCSI_3 (0x03)
+#define MPI_TB_DIAG_FORMAT_FC_TRACE_1 (0x04)
+
+
+/****************************************************************************/
+/* Toolbox ISTWI Read Write request */
+/****************************************************************************/
+
+typedef struct _MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Flags; /* 0Ch */
+ U8 BusNum; /* 0Dh */
+ U16 Reserved3; /* 0Eh */
+ U8 NumAddressBytes; /* 10h */
+ U8 Reserved4; /* 11h */
+ U16 DataLength; /* 12h */
+ U8 DeviceAddr; /* 14h */
+ U8 Addr1; /* 15h */
+ U8 Addr2; /* 16h */
+ U8 Addr3; /* 17h */
+ U32 Reserved5; /* 18h */
+ SGE_SIMPLE_UNION SGL; /* 1Ch */
+} MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+ ToolboxIstwiReadWriteRequest_t, MPI_POINTER pToolboxIstwiReadWriteRequest_t;
+
+#define MPI_TB_ISTWI_FLAGS_WRITE (0x00)
+#define MPI_TB_ISTWI_FLAGS_READ (0x01)
+
+
+/****************************************************************************/
+/* Toolbox FC Management request */
+/****************************************************************************/
+
+/* ActionInfo for Bus and TargetId */
+typedef struct _MPI_TB_FC_MANAGE_BUS_TID_AI
+{
+ U16 Reserved; /* 00h */
+ U8 Bus; /* 02h */
+ U8 TargetId; /* 03h */
+} MPI_TB_FC_MANAGE_BUS_TID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_BUS_TID_AI,
+ MpiTbFcManageBusTidAi_t, MPI_POINTER pMpiTbFcManageBusTidAi_t;
+
+/* ActionInfo for port identifier */
+typedef struct _MPI_TB_FC_MANAGE_PID_AI
+{
+ U32 PortIdentifier; /* 00h */
+} MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI,
+ MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t;
+
+/* union of ActionInfo */
+typedef union _MPI_TB_FC_MANAGE_AI_UNION
+{
+ MPI_TB_FC_MANAGE_BUS_TID_AI BusTid;
+ MPI_TB_FC_MANAGE_PID_AI Port;
+} MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION,
+ MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t;
+
+typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST
+{
+ U8 Tool; /* 00h */
+ U8 Reserved; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Action; /* 0Ch */
+ U8 Reserved3; /* 0Dh */
+ U16 Reserved4; /* 0Eh */
+ MPI_TB_FC_MANAGE_AI_UNION ActionInfo; /* 10h */
+} MSG_TOOLBOX_FC_MANAGE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_FC_MANAGE_REQUEST,
+ ToolboxFcManageRequest_t, MPI_POINTER pToolboxFcManageRequest_t;
+
+/* defines for the Action field */
+#define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00)
+#define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01)
+#define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02)
+
+
+/****************************************************************************/
+/* Diagnostic Buffer Post request */
+/****************************************************************************/
+
+typedef struct _MSG_DIAG_BUFFER_POST_REQUEST
+{
+ U8 TraceLevel; /* 00h */
+ U8 BufferType; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved1; /* 04h */
+ U8 Reserved2; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ExtendedType; /* 0Ch */
+ U32 BufferLength; /* 10h */
+ U32 ProductSpecific[4]; /* 14h */
+ U32 Reserved3; /* 18h */
+ SGE_SIMPLE_UNION SGL; /* 28h */
+} MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST,
+ DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t;
+
+#define MPI_DIAG_BUF_TYPE_TRACE (0x00)
+#define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01)
+#define MPI_DIAG_BUF_TYPE_EXTENDED (0x02)
+
+#define MPI_DIAG_EXTENDED_QTAG (0x00000001)
+
+
+/* Diagnostic Buffer Post reply */
+typedef struct _MSG_DIAG_BUFFER_POST_REPLY
+{
+ U8 Reserved1; /* 00h */
+ U8 BufferType; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferLength; /* 14h */
+} MSG_DIAG_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REPLY,
+ DiagBufferPostReply_t, MPI_POINTER pDiagBufferPostReply_t;
+
+
+/****************************************************************************/
+/* Diagnostic Release request */
+/****************************************************************************/
+
+typedef struct _MSG_DIAG_RELEASE_REQUEST
+{
+ U8 Reserved1; /* 00h */
+ U8 BufferType; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+} MSG_DIAG_RELEASE_REQUEST, MPI_POINTER PTR_MSG_DIAG_RELEASE_REQUEST,
+ DiagReleaseRequest_t, MPI_POINTER pDiagReleaseRequest_t;
+
+
+/* Diagnostic Release reply */
+typedef struct _MSG_DIAG_RELEASE_REPLY
+{
+ U8 Reserved1; /* 00h */
+ U8 BufferType; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_DIAG_RELEASE_REPLY, MPI_POINTER PTR_MSG_DIAG_RELEASE_REPLY,
+ DiagReleaseReply_t, MPI_POINTER pDiagReleaseReply_t;
+
+
+#endif
+
+
diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h
new file mode 100644
index 0000000..239328a
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_type.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2000-2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_type.h
+ * Title: MPI Basic type definitions
+ * Creation Date: June 6, 2000
+ *
+ * mpi_type.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
+ * 06-06-00 01.00.01 Update version number for 1.0 release.
+ * 11-02-00 01.01.01 Original release for post 1.0 work
+ * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
+ * 08-08-01 01.02.01 Original release for v1.2 work.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_TYPE_H
+#define MPI_TYPE_H
+
+
+/*******************************************************************************
+ * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER
+ * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer
+ * by defining MPI_POINTER as "far *" before this header file is included.
+ */
+#ifndef MPI_POINTER
+#define MPI_POINTER *
+#endif
+
+
+/*****************************************************************************
+*
+* B a s i c T y p e s
+*
+*****************************************************************************/
+
+typedef signed char S8;
+typedef unsigned char U8;
+typedef signed short S16;
+typedef unsigned short U16;
+
+
+typedef int32_t S32;
+typedef u_int32_t U32;
+
+/*
+ * The only way crap below could work on big-endian boxen would be if it
+ * wasn't used at all.
+ */
+
+typedef struct _S64
+{
+ U32 Low;
+ S32 High;
+} S64;
+
+typedef struct _U64
+{
+ U32 Low;
+ U32 High;
+} U64;
+
+
+/****************************************************************************/
+/* Pointers */
+/****************************************************************************/
+
+typedef S8 *PS8;
+typedef U8 *PU8;
+typedef S16 *PS16;
+typedef U16 *PU16;
+typedef S32 *PS32;
+typedef U32 *PU32;
+typedef S64 *PS64;
+typedef U64 *PU64;
+
+
+#endif
+