Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
new file mode 100644
index 0000000..e489c66
--- /dev/null
+++ b/drivers/net/irda/ali-ircc.h
@@ -0,0 +1,231 @@
+/*********************************************************************
+ *
+ * Filename: ali-ircc.h
+ * Version: 0.5
+ * Description: Driver for the ALI M1535D and M1543C FIR Controller
+ * Status: Experimental.
+ * Author: Benjamin Kong <benjamin_kong@ali.com.tw>
+ * Created at: 2000/10/16 03:46PM
+ * Modified at: 2001/1/3 02:56PM
+ * Modified by: Benjamin Kong <benjamin_kong@ali.com.tw>
+ *
+ * Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef ALI_IRCC_H
+#define ALI_IRCC_H
+
+#include <linux/time.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+/* SIR Register */
+/* Usr definition of linux/serial_reg.h */
+
+/* FIR Register */
+#define BANK0 0x20
+#define BANK1 0x21
+#define BANK2 0x22
+#define BANK3 0x23
+
+#define FIR_MCR 0x07 /* Master Control Register */
+
+/* Bank 0 */
+#define FIR_DR 0x00 /* Alias 0, FIR Data Register (R/W) */
+#define FIR_IER 0x01 /* Alias 1, FIR Interrupt Enable Register (R/W) */
+#define FIR_IIR 0x02 /* Alias 2, FIR Interrupt Identification Register (Read only) */
+#define FIR_LCR_A 0x03 /* Alias 3, FIR Line Control Register A (R/W) */
+#define FIR_LCR_B 0x04 /* Alias 4, FIR Line Control Register B (R/W) */
+#define FIR_LSR 0x05 /* Alias 5, FIR Line Status Register (R/W) */
+#define FIR_BSR 0x06 /* Alias 6, FIR Bus Status Register (Read only) */
+
+
+ /* Alias 1 */
+ #define IER_FIFO 0x10 /* FIR FIFO Interrupt Enable */
+ #define IER_TIMER 0x20 /* Timer Interrupt Enable */
+ #define IER_EOM 0x40 /* End of Message Interrupt Enable */
+ #define IER_ACT 0x80 /* Active Frame Interrupt Enable */
+
+ /* Alias 2 */
+ #define IIR_FIFO 0x10 /* FIR FIFO Interrupt */
+ #define IIR_TIMER 0x20 /* Timer Interrupt */
+ #define IIR_EOM 0x40 /* End of Message Interrupt */
+ #define IIR_ACT 0x80 /* Active Frame Interrupt */
+
+ /* Alias 3 */
+ #define LCR_A_FIFO_RESET 0x80 /* FIFO Reset */
+
+ /* Alias 4 */
+ #define LCR_B_BW 0x10 /* Brick Wall */
+ #define LCR_B_SIP 0x20 /* SIP Enable */
+ #define LCR_B_TX_MODE 0x40 /* Transmit Mode */
+ #define LCR_B_RX_MODE 0x80 /* Receive Mode */
+
+ /* Alias 5 */
+ #define LSR_FIR_LSA 0x00 /* FIR Line Status Address */
+ #define LSR_FRAME_ABORT 0x08 /* Frame Abort */
+ #define LSR_CRC_ERROR 0x10 /* CRC Error */
+ #define LSR_SIZE_ERROR 0x20 /* Size Error */
+ #define LSR_FRAME_ERROR 0x40 /* Frame Error */
+ #define LSR_FIFO_UR 0x80 /* FIFO Underrun */
+ #define LSR_FIFO_OR 0x80 /* FIFO Overrun */
+
+ /* Alias 6 */
+ #define BSR_FIFO_NOT_EMPTY 0x80 /* FIFO Not Empty */
+
+/* Bank 1 */
+#define FIR_CR 0x00 /* Alias 0, FIR Configuration Register (R/W) */
+#define FIR_FIFO_TR 0x01 /* Alias 1, FIR FIFO Threshold Register (R/W) */
+#define FIR_DMA_TR 0x02 /* Alias 2, FIR DMA Threshold Register (R/W) */
+#define FIR_TIMER_IIR 0x03 /* Alias 3, FIR Timer interrupt interval register (W/O) */
+#define FIR_FIFO_FR 0x03 /* Alias 3, FIR FIFO Flag register (R/O) */
+#define FIR_FIFO_RAR 0x04 /* Alias 4, FIR FIFO Read Address register (R/O) */
+#define FIR_FIFO_WAR 0x05 /* Alias 5, FIR FIFO Write Address register (R/O) */
+#define FIR_TR 0x06 /* Alias 6, Test REgister (W/O) */
+
+ /* Alias 0 */
+ #define CR_DMA_EN 0x01 /* DMA Enable */
+ #define CR_DMA_BURST 0x02 /* DMA Burst Mode */
+ #define CR_TIMER_EN 0x08 /* Timer Enable */
+
+ /* Alias 3 */
+ #define TIMER_IIR_500 0x00 /* 500 us */
+ #define TIMER_IIR_1ms 0x01 /* 1 ms */
+ #define TIMER_IIR_2ms 0x02 /* 2 ms */
+ #define TIMER_IIR_4ms 0x03 /* 4 ms */
+
+/* Bank 2 */
+#define FIR_IRDA_CR 0x00 /* Alias 0, IrDA Control Register (R/W) */
+#define FIR_BOF_CR 0x01 /* Alias 1, BOF Count Register (R/W) */
+#define FIR_BW_CR 0x02 /* Alias 2, Brick Wall Count Register (R/W) */
+#define FIR_TX_DSR_HI 0x03 /* Alias 3, TX Data Size Register (high) (R/W) */
+#define FIR_TX_DSR_LO 0x04 /* Alias 4, TX Data Size Register (low) (R/W) */
+#define FIR_RX_DSR_HI 0x05 /* Alias 5, RX Data Size Register (high) (R/W) */
+#define FIR_RX_DSR_LO 0x06 /* Alias 6, RX Data Size Register (low) (R/W) */
+
+ /* Alias 0 */
+ #define IRDA_CR_HDLC1152 0x80 /* 1.152Mbps HDLC Select */
+ #define IRDA_CR_CRC 0X40 /* CRC Select. */
+ #define IRDA_CR_HDLC 0x20 /* HDLC select. */
+ #define IRDA_CR_HP_MODE 0x10 /* HP mode (read only) */
+ #define IRDA_CR_SD_ST 0x08 /* SD/MODE State. */
+ #define IRDA_CR_FIR_SIN 0x04 /* FIR SIN Select. */
+ #define IRDA_CR_ITTX_0 0x02 /* SOUT State. IRTX force to 0 */
+ #define IRDA_CR_ITTX_1 0x03 /* SOUT State. IRTX force to 1 */
+
+/* Bank 3 */
+#define FIR_ID_VR 0x00 /* Alias 0, FIR ID Version Register (R/O) */
+#define FIR_MODULE_CR 0x01 /* Alias 1, FIR Module Control Register (R/W) */
+#define FIR_IO_BASE_HI 0x02 /* Alias 2, FIR Higher I/O Base Address Register (R/O) */
+#define FIR_IO_BASE_LO 0x03 /* Alias 3, FIR Lower I/O Base Address Register (R/O) */
+#define FIR_IRQ_CR 0x04 /* Alias 4, FIR IRQ Channel Register (R/O) */
+#define FIR_DMA_CR 0x05 /* Alias 5, FIR DMA Channel Register (R/O) */
+
+struct ali_chip {
+ char *name;
+ int cfg[2];
+ unsigned char entr1;
+ unsigned char entr2;
+ unsigned char cid_index;
+ unsigned char cid_value;
+ int (*probe)(struct ali_chip *chip, chipio_t *info);
+ int (*init)(struct ali_chip *chip, chipio_t *info);
+};
+typedef struct ali_chip ali_chip_t;
+
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+#define TX_FIFO_Threshold 8
+#define RX_FIFO_Threshold 1
+#define TX_DMA_Threshold 1
+#define RX_DMA_Threshold 1
+
+/* For storing entries in the status FIFO */
+
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Lenght of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Lenght of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+/* Private data for each instance */
+struct ali_ircc_cb {
+
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ __u8 ier; /* Interrupt enable register */
+
+ __u8 InterruptID; /* Interrupt ID */
+ __u8 BusStatus; /* Bus Status */
+ __u8 LineStatus; /* Line Status */
+
+ unsigned char rcvFramesOverflow;
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ unsigned char fifo_opti_buf;
+
+ struct pm_dev *dev;
+};
+
+static inline void switch_bank(int iobase, int bank)
+{
+ outb(bank, iobase+FIR_MCR);
+}
+
+#endif /* ALI_IRCC_H */