Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
new file mode 100644
index 0000000..93e39c4
--- /dev/null
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -0,0 +1,1569 @@
+/*
+ * Compaq Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+#include "../pci.h"
+#include "cpqphp.h"
+#include "cpqphp_nvram.h"
+#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+
+
+u8 cpqhp_nic_irq;
+u8 cpqhp_disk_irq;
+
+static u16 unused_IRQ;
+
+/*
+ * detect_HRT_floating_pointer
+ *
+ * find the Hot Plug Resource Table in the specified region of memory.
+ *
+ */
+static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end)
+{
+ void __iomem *fp;
+ void __iomem *endp;
+ u8 temp1, temp2, temp3, temp4;
+ int status = 0;
+
+ endp = (end - sizeof(struct hrt) + 1);
+
+ for (fp = begin; fp <= endp; fp += 16) {
+ temp1 = readb(fp + SIG0);
+ temp2 = readb(fp + SIG1);
+ temp3 = readb(fp + SIG2);
+ temp4 = readb(fp + SIG3);
+ if (temp1 == '$' &&
+ temp2 == 'H' &&
+ temp3 == 'R' &&
+ temp4 == 'T') {
+ status = 1;
+ break;
+ }
+ }
+
+ if (!status)
+ fp = NULL;
+
+ dbg("Discovered Hotplug Resource Table at %p\n", fp);
+ return fp;
+}
+
+
+int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
+{
+ unsigned char bus;
+ struct pci_bus *child;
+ int num;
+
+ if (func->pci_dev == NULL)
+ func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+
+ /* No pci device, we need to create it then */
+ if (func->pci_dev == NULL) {
+ dbg("INFO: pci_dev still null\n");
+
+ num = pci_scan_slot(ctrl->pci_dev->bus, PCI_DEVFN(func->device, func->function));
+ if (num)
+ pci_bus_add_devices(ctrl->pci_dev->bus);
+
+ func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+ if (func->pci_dev == NULL) {
+ dbg("ERROR: pci_dev still null\n");
+ return 0;
+ }
+ }
+
+ if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus);
+ child = (struct pci_bus*) pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus);
+ pci_do_scan_bus(child);
+ }
+
+ return 0;
+}
+
+
+int cpqhp_unconfigure_device(struct pci_func* func)
+{
+ int j;
+
+ dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus, func->device, func->function);
+
+ for (j=0; j<8 ; j++) {
+ struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j));
+ if (temp)
+ pci_remove_bus_device(temp);
+ }
+ return 0;
+}
+
+static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 offset, u32 *value)
+{
+ u32 vendID = 0;
+
+ if (pci_bus_read_config_dword (bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
+ return -1;
+ if (vendID == 0xffffffff)
+ return -1;
+ return pci_bus_read_config_dword (bus, devfn, offset, value);
+}
+
+
+/*
+ * cpqhp_set_irq
+ *
+ * @bus_num: bus number of PCI device
+ * @dev_num: device number of PCI device
+ * @slot: pointer to u8 where slot number will be returned
+ */
+int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
+{
+ int rc = 0;
+
+ if (cpqhp_legacy_mode) {
+ struct pci_dev *fakedev;
+ struct pci_bus *fakebus;
+ u16 temp_word;
+
+ fakedev = kmalloc(sizeof(*fakedev), GFP_KERNEL);
+ fakebus = kmalloc(sizeof(*fakebus), GFP_KERNEL);
+ if (!fakedev || !fakebus) {
+ kfree(fakedev);
+ kfree(fakebus);
+ return -ENOMEM;
+ }
+
+ fakedev->devfn = dev_num << 3;
+ fakedev->bus = fakebus;
+ fakebus->number = bus_num;
+ dbg("%s: dev %d, bus %d, pin %d, num %d\n",
+ __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
+ rc = pcibios_set_irq_routing(fakedev, int_pin - 0x0a, irq_num);
+ kfree(fakedev);
+ kfree(fakebus);
+ dbg("%s: rc %d\n", __FUNCTION__, rc);
+ if (!rc)
+ return !rc;
+
+ // set the Edge Level Control Register (ELCR)
+ temp_word = inb(0x4d0);
+ temp_word |= inb(0x4d1) << 8;
+
+ temp_word |= 0x01 << irq_num;
+
+ // This should only be for x86 as it sets the Edge Level Control Register
+ outb((u8) (temp_word & 0xFF), 0x4d0);
+ outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
+ rc = 0;
+ }
+
+ return rc;
+}
+
+
+/*
+ * WTF??? This function isn't in the code, yet a function calls it, but the
+ * compiler optimizes it away? strange. Here as a placeholder to keep the
+ * compiler happy.
+ */
+static int PCI_ScanBusNonBridge (u8 bus, u8 device)
+{
+ return 0;
+}
+
+static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num)
+{
+ u16 tdevice;
+ u32 work;
+ u8 tbus;
+
+ ctrl->pci_bus->number = bus_num;
+
+ for (tdevice = 0; tdevice < 0xFF; tdevice++) {
+ //Scan for access first
+ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+ continue;
+ dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
+ //Yep we got one. Not a bridge ?
+ if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
+ *dev_num = tdevice;
+ dbg("found it !\n");
+ return 0;
+ }
+ }
+ for (tdevice = 0; tdevice < 0xFF; tdevice++) {
+ //Scan for access first
+ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+ continue;
+ dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
+ //Yep we got one. bridge ?
+ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
+ dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
+ if (PCI_ScanBusNonBridge(tbus, tdevice) == 0)
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
+
+static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
+{
+ struct irq_routing_table *PCIIRQRoutingInfoLength;
+ long len;
+ long loop;
+ u32 work;
+
+ u8 tbus, tdevice, tslot;
+
+ PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
+ if (!PCIIRQRoutingInfoLength)
+ return -1;
+
+ len = (PCIIRQRoutingInfoLength->size -
+ sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+ // Make sure I got at least one entry
+ if (len == 0) {
+ if (PCIIRQRoutingInfoLength != NULL)
+ kfree(PCIIRQRoutingInfoLength );
+ return -1;
+ }
+
+ for (loop = 0; loop < len; ++loop) {
+ tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
+ tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn;
+ tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+
+ if (tslot == slot) {
+ *bus_num = tbus;
+ *dev_num = tdevice;
+ ctrl->pci_bus->number = tbus;
+ pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
+ if (!nobridge || (work == 0xffffffff)) {
+ if (PCIIRQRoutingInfoLength != NULL)
+ kfree(PCIIRQRoutingInfoLength );
+ return 0;
+ }
+
+ dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
+ pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
+ dbg("work >> 8 (%x) = BRIDGE (%x)\n", work >> 8, PCI_TO_PCI_BRIDGE_CLASS);
+
+ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
+ pci_bus_read_config_byte (ctrl->pci_bus, *dev_num, PCI_SECONDARY_BUS, &tbus);
+ dbg("Scan bus for Non Bridge: bus %d\n", tbus);
+ if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
+ *bus_num = tbus;
+ if (PCIIRQRoutingInfoLength != NULL)
+ kfree(PCIIRQRoutingInfoLength );
+ return 0;
+ }
+ } else {
+ if (PCIIRQRoutingInfoLength != NULL)
+ kfree(PCIIRQRoutingInfoLength );
+ return 0;
+ }
+
+ }
+ }
+ if (PCIIRQRoutingInfoLength != NULL)
+ kfree(PCIIRQRoutingInfoLength );
+ return -1;
+}
+
+
+int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
+{
+ return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed)
+}
+
+
+/* More PCI configuration routines; this time centered around hotplug controller */
+
+
+/*
+ * cpqhp_save_config
+ *
+ * Reads configuration for all slots in a PCI bus and saves info.
+ *
+ * Note: For non-hot plug busses, the slot # saved is the device #
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
+{
+ long rc;
+ u8 class_code;
+ u8 header_type;
+ u32 ID;
+ u8 secondary_bus;
+ struct pci_func *new_slot;
+ int sub_bus;
+ int FirstSupported;
+ int LastSupported;
+ int max_functions;
+ int function;
+ u8 DevError;
+ int device = 0;
+ int cloop = 0;
+ int stop_it;
+ int index;
+
+ // Decide which slots are supported
+
+ if (is_hot_plug) {
+ //*********************************
+ // is_hot_plug is the slot mask
+ //*********************************
+ FirstSupported = is_hot_plug >> 4;
+ LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
+ } else {
+ FirstSupported = 0;
+ LastSupported = 0x1F;
+ }
+
+ // Save PCI configuration space for all devices in supported slots
+ ctrl->pci_bus->number = busnumber;
+ for (device = FirstSupported; device <= LastSupported; device++) {
+ ID = 0xFFFFFFFF;
+ rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+
+ if (ID != 0xFFFFFFFF) { // device in slot
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ // If multi-function device, set max_functions to 8
+ if (header_type & 0x80)
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ DevError = 0;
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge
+ // Recurse the subordinate bus
+ // get the subordinate bus number
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+ if (rc) {
+ return rc;
+ } else {
+ sub_bus = (int) secondary_bus;
+
+ // Save secondary bus cfg spc
+ // with this recursive call.
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
+ if (rc)
+ return rc;
+ ctrl->pci_bus->number = busnumber;
+ }
+ }
+
+ index = 0;
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
+ while (new_slot &&
+ (new_slot->function != (u8) function))
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
+
+ if (!new_slot) {
+ // Setup slot structure.
+ new_slot = cpqhp_slot_create(busnumber);
+
+ if (new_slot == NULL)
+ return(1);
+ }
+
+ new_slot->bus = (u8) busnumber;
+ new_slot->device = (u8) device;
+ new_slot->function = (u8) function;
+ new_slot->is_a_board = 1;
+ new_slot->switch_save = 0x10;
+ // In case of unsupported board
+ new_slot->status = DevError;
+ new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
+
+ for (cloop = 0; cloop < 0x20; cloop++) {
+ rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+ if (rc)
+ return rc;
+ }
+
+ function++;
+
+ stop_it = 0;
+
+ // this loop skips to the next present function
+ // reading in Class Code and Header type.
+
+ while ((function < max_functions)&&(!stop_it)) {
+ rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+ if (ID == 0xFFFFFFFF) { // nothing there.
+ function++;
+ } else { // Something there
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ stop_it++;
+ }
+ }
+
+ } while (function < max_functions);
+ } // End of IF (device in slot?)
+ else if (is_hot_plug) {
+ // Setup slot structure with entry for empty slot
+ new_slot = cpqhp_slot_create(busnumber);
+
+ if (new_slot == NULL) {
+ return(1);
+ }
+
+ new_slot->bus = (u8) busnumber;
+ new_slot->device = (u8) device;
+ new_slot->function = 0;
+ new_slot->is_a_board = 0;
+ new_slot->presence_save = 0;
+ new_slot->switch_save = 0;
+ }
+ } // End of FOR loop
+
+ return(0);
+}
+
+
+/*
+ * cpqhp_save_slot_config
+ *
+ * Saves configuration info for all PCI devices in a given slot
+ * including subordinate busses.
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
+{
+ long rc;
+ u8 class_code;
+ u8 header_type;
+ u32 ID;
+ u8 secondary_bus;
+ int sub_bus;
+ int max_functions;
+ int function;
+ int cloop = 0;
+ int stop_it;
+
+ ID = 0xFFFFFFFF;
+
+ ctrl->pci_bus->number = new_slot->bus;
+ pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
+
+ if (ID != 0xFFFFFFFF) { // device in slot
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
+
+ if (header_type & 0x80) // Multi-function device
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ // Recurse the subordinate bus
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ // Save the config headers for the secondary bus.
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
+ if (rc)
+ return(rc);
+ ctrl->pci_bus->number = new_slot->bus;
+
+ } // End of IF
+
+ new_slot->status = 0;
+
+ for (cloop = 0; cloop < 0x20; cloop++) {
+ pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+ }
+
+ function++;
+
+ stop_it = 0;
+
+ // this loop skips to the next present function
+ // reading in the Class Code and the Header type.
+
+ while ((function < max_functions) && (!stop_it)) {
+ pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
+
+ if (ID == 0xFFFFFFFF) { // nothing there.
+ function++;
+ } else { // Something there
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+
+ stop_it++;
+ }
+ }
+
+ } while (function < max_functions);
+ } // End of IF (device in slot?)
+ else {
+ return 2;
+ }
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_save_base_addr_length
+ *
+ * Saves the length of all base address registers for the
+ * specified slot. this is for hot plug REPLACE
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 type;
+ int sub_bus;
+ u32 temp_register;
+ u32 base;
+ u32 rc;
+ struct pci_func *next;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ // Check for Bridge
+ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ // PCI-PCI Bridge
+ pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ next = cpqhp_slot_list[sub_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_save_base_addr_length(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+ pci_bus->number = func->bus;
+
+ //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together
+ // Figure out IO and memory base lengths
+ for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
+
+ if (base) { // If this register is implemented
+ if (base & 0x01L) {
+ // IO base
+ // set base = amount of IO space requested
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ // memory base
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ // Save information in slot structure
+ func->base_length[(cloop - 0x10) >> 2] =
+ base;
+ func->base_type[(cloop - 0x10) >> 2] = type;
+
+ } // End of base register loop
+
+
+ } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge
+ // Figure out IO and memory base lengths
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
+
+ if (base) { // If this register is implemented
+ if (base & 0x01L) {
+ // IO base
+ // base = amount of IO space requested
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ // memory base
+ // base = amount of memory space requested
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ // Save information in slot structure
+ func->base_length[(cloop - 0x10) >> 2] = base;
+ func->base_type[(cloop - 0x10) >> 2] = type;
+
+ } // End of base register loop
+
+ } else { // Some other unknown header type
+ }
+
+ // find the next device in this slot
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return(0);
+}
+
+
+/*
+ * cpqhp_save_used_resources
+ *
+ * Stores used resource information for existing boards. this is
+ * for boards that were in the system when this driver was loaded.
+ * this function is for hot plug ADD
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 temp_byte;
+ u8 b_base;
+ u8 b_length;
+ u16 command;
+ u16 save_command;
+ u16 w_base;
+ u16 w_length;
+ u32 temp_register;
+ u32 save_base;
+ u32 base;
+ int index = 0;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while ((func != NULL) && func->is_a_board) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ // Save the command register
+ pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
+
+ // disable card
+ command = 0x00;
+ pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
+
+ // Check for Bridge
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ // Clear Bridge Control Register
+ command = 0x00;
+ pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
+
+ bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
+ if (!bus_node)
+ return -ENOMEM;
+
+ bus_node->base = secondary_bus;
+ bus_node->length = temp_byte - secondary_bus + 1;
+
+ bus_node->next = func->bus_head;
+ func->bus_head = bus_node;
+
+ // Save IO base and Limit registers
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
+
+ if ((b_base <= b_length) && (save_command & 0x01)) {
+ io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = (b_base & 0xF0) << 8;
+ io_node->length = (b_length - b_base + 0x10) << 8;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ }
+
+ // Save memory base and Limit registers
+ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
+ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
+
+ if ((w_base <= w_length) && (save_command & 0x02)) {
+ mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = w_base << 16;
+ mem_node->length = (w_length - w_base + 0x10) << 16;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ }
+
+ // Save prefetchable memory base and Limit registers
+ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
+ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
+
+ if ((w_base <= w_length) && (save_command & 0x02)) {
+ p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = w_base << 16;
+ p_mem_node->length = (w_length - w_base + 0x10) << 16;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ }
+ // Figure out IO and memory base lengths
+ for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
+ pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
+
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ temp_register = base;
+
+ if (base) { // If this register is implemented
+ if (((base & 0x03L) == 0x01)
+ && (save_command & 0x01)) {
+ // IO base
+ // set temp_register = amount of IO space requested
+ temp_register = base & 0xFFFFFFFE;
+ temp_register = (~temp_register) + 1;
+
+ io_node = kmalloc(sizeof(*io_node),
+ GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base =
+ save_base & (~0x03L);
+ io_node->length = temp_register;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else
+ if (((base & 0x0BL) == 0x08)
+ && (save_command & 0x02)) {
+ // prefetchable memory base
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ p_mem_node = kmalloc(sizeof(*p_mem_node),
+ GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = save_base & (~0x0FL);
+ p_mem_node->length = temp_register;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ } else
+ if (((base & 0x0BL) == 0x00)
+ && (save_command & 0x02)) {
+ // prefetchable memory base
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ mem_node = kmalloc(sizeof(*mem_node),
+ GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = save_base & (~0x0FL);
+ mem_node->length = temp_register;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return(1);
+ }
+ } // End of base register loop
+ } else if ((header_type & 0x7F) == 0x00) { // Standard header
+ // Figure out IO and memory base lengths
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
+
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ temp_register = base;
+
+ if (base) { // If this register is implemented
+ if (((base & 0x03L) == 0x01)
+ && (save_command & 0x01)) {
+ // IO base
+ // set temp_register = amount of IO space requested
+ temp_register = base & 0xFFFFFFFE;
+ temp_register = (~temp_register) + 1;
+
+ io_node = kmalloc(sizeof(*io_node),
+ GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = save_base & (~0x01L);
+ io_node->length = temp_register;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else
+ if (((base & 0x0BL) == 0x08)
+ && (save_command & 0x02)) {
+ // prefetchable memory base
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ p_mem_node = kmalloc(sizeof(*p_mem_node),
+ GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = save_base & (~0x0FL);
+ p_mem_node->length = temp_register;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ } else
+ if (((base & 0x0BL) == 0x00)
+ && (save_command & 0x02)) {
+ // prefetchable memory base
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ mem_node = kmalloc(sizeof(*mem_node),
+ GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = save_base & (~0x0FL);
+ mem_node->length = temp_register;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return(1);
+ }
+ } // End of base register loop
+ } else { // Some other unknown header type
+ }
+
+ // find the next device in this slot
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return(0);
+}
+
+
+/*
+ * cpqhp_configure_board
+ *
+ * Copies saved configuration information to one slot.
+ * this is called recursively for bridge devices.
+ * this is for hot plug REPLACE!
+ *
+ * returns 0 if success
+ */
+int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
+{
+ int cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ int sub_bus;
+ struct pci_func *next;
+ u32 temp;
+ u32 rc;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ // Start at the top of config space so that the control
+ // registers are programmed last
+ for (cloop = 0x3C; cloop > 0; cloop -= 4) {
+ pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
+ }
+
+ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ // If this is a bridge device, restore subordinate devices
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ next = cpqhp_slot_list[sub_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_configure_board(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+ } else {
+
+ // Check all the base Address Registers to make sure
+ // they are the same. If not, the board is different.
+
+ for (cloop = 16; cloop < 40; cloop += 4) {
+ pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
+
+ if (temp != func->config_space[cloop >> 2]) {
+ dbg("Config space compare failure!!! offset = %x\n", cloop);
+ dbg("bus = %x, device = %x, function = %x\n", func->bus, func->device, func->function);
+ dbg("temp = %x, config space = %x\n\n", temp, func->config_space[cloop >> 2]);
+ return 1;
+ }
+ }
+ }
+
+ func->configured = 1;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_valid_replace
+ *
+ * this function checks to see if a board is the same as the
+ * one it is replacing. this check will detect if the device's
+ * vendor or device id's are the same
+ *
+ * returns 0 if the board is the same nonzero otherwise
+ */
+int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 type;
+ u32 temp_register = 0;
+ u32 base;
+ u32 rc;
+ struct pci_func *next;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ if (!func->is_a_board)
+ return(ADD_NOT_SUPPORTED);
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
+
+ // No adapter present
+ if (temp_register == 0xFFFFFFFF)
+ return(NO_ADAPTER_PRESENT);
+
+ if (temp_register != func->config_space[0])
+ return(ADAPTER_NOT_SAME);
+
+ // Check for same revision number and class code
+ pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
+
+ // Adapter not the same
+ if (temp_register != func->config_space[0x08 >> 2])
+ return(ADAPTER_NOT_SAME);
+
+ // Check for Bridge
+ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ // In order to continue checking, we must program the
+ // bus registers in the bridge to respond to accesses
+ // for it's subordinate bus(es)
+
+ temp_register = func->config_space[0x18 >> 2];
+ pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
+
+ secondary_bus = (temp_register >> 8) & 0xFF;
+
+ next = cpqhp_slot_list[secondary_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_valid_replace(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+
+ }
+ // Check to see if it is a standard config header
+ else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+ // Check subsystem vendor and ID
+ pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
+
+ if (temp_register != func->config_space[0x2C >> 2]) {
+ // If it's a SMART-2 and the register isn't filled
+ // in, ignore the difference because
+ // they just have an old rev of the firmware
+
+ if (!((func->config_space[0] == 0xAE100E11)
+ && (temp_register == 0x00L)))
+ return(ADAPTER_NOT_SAME);
+ }
+ // Figure out IO and memory base lengths
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
+ if (base) { // If this register is implemented
+ if (base & 0x01L) {
+ // IO base
+ // set base = amount of IO space requested
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ // memory base
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ // Check information in slot structure
+ if (func->base_length[(cloop - 0x10) >> 2] != base)
+ return(ADAPTER_NOT_SAME);
+
+ if (func->base_type[(cloop - 0x10) >> 2] != type)
+ return(ADAPTER_NOT_SAME);
+
+ } // End of base register loop
+
+ } // End of (type 0 config space) else
+ else {
+ // this is not a type 0 or 1 config space header so
+ // we don't know how to do it
+ return(DEVICE_TYPE_NOT_SUPPORTED);
+ }
+
+ // Get the next function
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_find_available_resources
+ *
+ * Finds available memory, IO, and IRQ resources for programming
+ * devices which may be added to the system
+ * this function is for hot plug ADD!
+ *
+ * returns 0 if success
+ */
+int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
+{
+ u8 temp;
+ u8 populated_slot;
+ u8 bridged_slot;
+ void __iomem *one_slot;
+ void __iomem *rom_resource_table;
+ struct pci_func *func = NULL;
+ int i = 10, index;
+ u32 temp_dword, rc;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+
+ rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
+ dbg("rom_resource_table = %p\n", rom_resource_table);
+
+ if (rom_resource_table == NULL) {
+ return -ENODEV;
+ }
+ // Sum all resources and setup resource maps
+ unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
+ dbg("unused_IRQ = %x\n", unused_IRQ);
+
+ temp = 0;
+ while (unused_IRQ) {
+ if (unused_IRQ & 1) {
+ cpqhp_disk_irq = temp;
+ break;
+ }
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+ }
+
+ dbg("cpqhp_disk_irq= %d\n", cpqhp_disk_irq);
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+
+ while (unused_IRQ) {
+ if (unused_IRQ & 1) {
+ cpqhp_nic_irq = temp;
+ break;
+ }
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+ }
+
+ dbg("cpqhp_nic_irq= %d\n", cpqhp_nic_irq);
+ unused_IRQ = readl(rom_resource_table + PCIIRQ);
+
+ temp = 0;
+
+ if (!cpqhp_nic_irq) {
+ cpqhp_nic_irq = ctrl->cfgspc_irq;
+ }
+
+ if (!cpqhp_disk_irq) {
+ cpqhp_disk_irq = ctrl->cfgspc_irq;
+ }
+
+ dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
+
+ rc = compaq_nvram_load(rom_start, ctrl);
+ if (rc)
+ return rc;
+
+ one_slot = rom_resource_table + sizeof (struct hrt);
+
+ i = readb(rom_resource_table + NUMBER_OF_ENTRIES);
+ dbg("number_of_entries = %d\n", i);
+
+ if (!readb(one_slot + SECONDARY_BUS))
+ return 1;
+
+ dbg("dev|IO base|length|Mem base|length|Pre base|length|PB SB MB\n");
+
+ while (i && readb(one_slot + SECONDARY_BUS)) {
+ u8 dev_func = readb(one_slot + DEV_FUNC);
+ u8 primary_bus = readb(one_slot + PRIMARY_BUS);
+ u8 secondary_bus = readb(one_slot + SECONDARY_BUS);
+ u8 max_bus = readb(one_slot + MAX_BUS);
+ u16 io_base = readw(one_slot + IO_BASE);
+ u16 io_length = readw(one_slot + IO_LENGTH);
+ u16 mem_base = readw(one_slot + MEM_BASE);
+ u16 mem_length = readw(one_slot + MEM_LENGTH);
+ u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE);
+ u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH);
+
+ dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n",
+ dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
+ primary_bus, secondary_bus, max_bus);
+
+ // If this entry isn't for our controller's bus, ignore it
+ if (primary_bus != ctrl->bus) {
+ i--;
+ one_slot += sizeof (struct slot_rt);
+ continue;
+ }
+ // find out if this entry is for an occupied slot
+ ctrl->pci_bus->number = primary_bus;
+ pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
+ dbg("temp_D_word = %x\n", temp_dword);
+
+ if (temp_dword != 0xFFFFFFFF) {
+ index = 0;
+ func = cpqhp_slot_find(primary_bus, dev_func >> 3, 0);
+
+ while (func && (func->function != (dev_func & 0x07))) {
+ dbg("func = %p (bus, dev, fun) = (%d, %d, %d)\n", func, primary_bus, dev_func >> 3, index);
+ func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
+ }
+
+ // If we can't find a match, skip this table entry
+ if (!func) {
+ i--;
+ one_slot += sizeof (struct slot_rt);
+ continue;
+ }
+ // this may not work and shouldn't be used
+ if (secondary_bus != primary_bus)
+ bridged_slot = 1;
+ else
+ bridged_slot = 0;
+
+ populated_slot = 1;
+ } else {
+ populated_slot = 0;
+ bridged_slot = 0;
+ }
+
+
+ // If we've got a valid IO base, use it
+
+ temp_dword = io_base + io_length;
+
+ if ((io_base) && (temp_dword < 0x10000)) {
+ io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = io_base;
+ io_node->length = io_length;
+
+ dbg("found io_node(base, length) = %x, %x\n",
+ io_node->base, io_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ io_node->next = ctrl->io_head;
+ ctrl->io_head = io_node;
+ } else {
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ }
+ }
+
+ // If we've got a valid memory base, use it
+ temp_dword = mem_base + mem_length;
+ if ((mem_base) && (temp_dword < 0x10000)) {
+ mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = mem_base << 16;
+
+ mem_node->length = mem_length << 16;
+
+ dbg("found mem_node(base, length) = %x, %x\n",
+ mem_node->base, mem_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ mem_node->next = ctrl->mem_head;
+ ctrl->mem_head = mem_node;
+ } else {
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ }
+ }
+
+ // If we've got a valid prefetchable memory base, and
+ // the base + length isn't greater than 0xFFFF
+ temp_dword = pre_mem_base + pre_mem_length;
+ if ((pre_mem_base) && (temp_dword < 0x10000)) {
+ p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = pre_mem_base << 16;
+
+ p_mem_node->length = pre_mem_length << 16;
+ dbg("found p_mem_node(base, length) = %x, %x\n",
+ p_mem_node->base, p_mem_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+
+ if (!populated_slot) {
+ p_mem_node->next = ctrl->p_mem_head;
+ ctrl->p_mem_head = p_mem_node;
+ } else {
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ }
+ }
+
+ // If we've got a valid bus number, use it
+ // The second condition is to ignore bus numbers on
+ // populated slots that don't have PCI-PCI bridges
+ if (secondary_bus && (secondary_bus != primary_bus)) {
+ bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
+ if (!bus_node)
+ return -ENOMEM;
+
+ bus_node->base = secondary_bus;
+ bus_node->length = max_bus - secondary_bus + 1;
+ dbg("found bus_node(base, length) = %x, %x\n",
+ bus_node->base, bus_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ bus_node->next = ctrl->bus_head;
+ ctrl->bus_head = bus_node;
+ } else {
+ bus_node->next = func->bus_head;
+ func->bus_head = bus_node;
+ }
+ }
+
+ i--;
+ one_slot += sizeof (struct slot_rt);
+ }
+
+ // If all of the following fail, we don't have any resources for
+ // hot plug add
+ rc = 1;
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ return rc;
+}
+
+
+/*
+ * cpqhp_return_board_resources
+ *
+ * this routine returns all resources allocated to a board to
+ * the available pool.
+ *
+ * returns 0 if success
+ */
+int cpqhp_return_board_resources(struct pci_func * func, struct resource_lists * resources)
+{
+ int rc = 0;
+ struct pci_resource *node;
+ struct pci_resource *t_node;
+ dbg("%s\n", __FUNCTION__);
+
+ if (!func)
+ return 1;
+
+ node = func->io_head;
+ func->io_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->io_head), node);
+ node = t_node;
+ }
+
+ node = func->mem_head;
+ func->mem_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->mem_head), node);
+ node = t_node;
+ }
+
+ node = func->p_mem_head;
+ func->p_mem_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->p_mem_head), node);
+ node = t_node;
+ }
+
+ node = func->bus_head;
+ func->bus_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->bus_head), node);
+ node = t_node;
+ }
+
+ rc |= cpqhp_resource_sort_and_combine(&(resources->mem_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->p_mem_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->io_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->bus_head));
+
+ return rc;
+}
+
+
+/*
+ * cpqhp_destroy_resource_list
+ *
+ * Puts node back in the resource list pointed to by head
+ */
+void cpqhp_destroy_resource_list (struct resource_lists * resources)
+{
+ struct pci_resource *res, *tres;
+
+ res = resources->io_head;
+ resources->io_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->mem_head;
+ resources->mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->p_mem_head;
+ resources->p_mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->bus_head;
+ resources->bus_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+}
+
+
+/*
+ * cpqhp_destroy_board_resources
+ *
+ * Puts node back in the resource list pointed to by head
+ */
+void cpqhp_destroy_board_resources (struct pci_func * func)
+{
+ struct pci_resource *res, *tres;
+
+ res = func->io_head;
+ func->io_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->mem_head;
+ func->mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->p_mem_head;
+ func->p_mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->bus_head;
+ func->bus_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+}
+