Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
new file mode 100644
index 0000000..dca2154
--- /dev/null
+++ b/drivers/scsi/u14-34f.c
@@ -0,0 +1,1987 @@
+/*
+ * u14-34f.c - Low-level driver for UltraStor 14F/34F SCSI host adapters.
+ *
+ * 03 Jun 2003 Rev. 8.10 for linux-2.5.70
+ * + Update for new IRQ API.
+ * + Use "goto" when appropriate.
+ * + Drop u14-34f.h.
+ * + Update for new module_param API.
+ * + Module parameters can now be specified only in the
+ * same format as the kernel boot options.
+ *
+ * boot option old module param
+ * ----------- ------------------
+ * addr,... io_port=addr,...
+ * lc:[y|n] linked_comm=[1|0]
+ * mq:xx max_queue_depth=xx
+ * tm:[0|1|2] tag_mode=[0|1|2]
+ * et:[y|n] ext_tran=[1|0]
+ * of:[y|n] have_old_firmware=[1|0]
+ *
+ * A valid example using the new parameter format is:
+ * modprobe u14-34f "u14-34f=0x340,0x330,lc:y,tm:0,mq:4"
+ *
+ * which is equivalent to the old format:
+ * modprobe u14-34f io_port=0x340,0x330 linked_comm=1 tag_mode=0 \
+ * max_queue_depth=4
+ *
+ * With actual module code, u14-34f and u14_34f are equivalent
+ * as module parameter names.
+ *
+ * 12 Feb 2003 Rev. 8.04 for linux 2.5.60
+ * + Release irq before calling scsi_register.
+ *
+ * 12 Nov 2002 Rev. 8.02 for linux 2.5.47
+ * + Release driver_lock before calling scsi_register.
+ *
+ * 11 Nov 2002 Rev. 8.01 for linux 2.5.47
+ * + Fixed bios_param and scsicam_bios_param calling parameters.
+ *
+ * 28 Oct 2002 Rev. 8.00 for linux 2.5.44-ac4
+ * + Use new tcq and adjust_queue_depth api.
+ * + New command line option (tm:[0-2]) to choose the type of tags:
+ * 0 -> disable tagging ; 1 -> simple tags ; 2 -> ordered tags.
+ * Default is tm:0 (tagged commands disabled).
+ * For compatibility the "tc:" option is an alias of the "tm:"
+ * option; tc:n is equivalent to tm:0 and tc:y is equivalent to
+ * tm:1.
+ *
+ * 10 Oct 2002 Rev. 7.70 for linux 2.5.42
+ * + Foreport from revision 6.70.
+ *
+ * 25 Jun 2002 Rev. 6.70 for linux 2.4.19
+ * + Fixed endian-ness problem due to bitfields.
+ *
+ * 21 Feb 2002 Rev. 6.52 for linux 2.4.18
+ * + Backport from rev. 7.22 (use io_request_lock).
+ *
+ * 20 Feb 2002 Rev. 7.22 for linux 2.5.5
+ * + Remove any reference to virt_to_bus().
+ * + Fix pio hang while detecting multiple HBAs.
+ *
+ * 01 Jan 2002 Rev. 7.20 for linux 2.5.1
+ * + Use the dynamic DMA mapping API.
+ *
+ * 19 Dec 2001 Rev. 7.02 for linux 2.5.1
+ * + Use SCpnt->sc_data_direction if set.
+ * + Use sglist.page instead of sglist.address.
+ *
+ * 11 Dec 2001 Rev. 7.00 for linux 2.5.1
+ * + Use host->host_lock instead of io_request_lock.
+ *
+ * 1 May 2001 Rev. 6.05 for linux 2.4.4
+ * + Fix data transfer direction for opcode SEND_CUE_SHEET (0x5d)
+ *
+ * 25 Jan 2001 Rev. 6.03 for linux 2.4.0
+ * + "check_region" call replaced by "request_region".
+ *
+ * 22 Nov 2000 Rev. 6.02 for linux 2.4.0-test11
+ * + Removed old scsi error handling support.
+ * + The obsolete boot option flag eh:n is silently ignored.
+ * + Removed error messages while a disk drive is powered up at
+ * boot time.
+ * + Improved boot messages: all tagged capable device are
+ * indicated as "tagged".
+ *
+ * 16 Sep 1999 Rev. 5.11 for linux 2.2.12 and 2.3.18
+ * + Updated to the new __setup interface for boot command line options.
+ * + When loaded as a module, accepts the new parameter boot_options
+ * which value is a string with the same format of the kernel boot
+ * command line options. A valid example is:
+ * modprobe u14-34f 'boot_options="0x230,0x340,lc:y,mq:4"'
+ *
+ * 22 Jul 1999 Rev. 5.00 for linux 2.2.10 and 2.3.11
+ * + Removed pre-2.2 source code compatibility.
+ *
+ * 26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
+ * Added command line option (et:[y|n]) to use the existing
+ * translation (returned by scsicam_bios_param) as disk geometry.
+ * The default is et:n, which uses the disk geometry jumpered
+ * on the board.
+ * The default value et:n is compatible with all previous revisions
+ * of this driver.
+ *
+ * 28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
+ * Increased busy timeout from 10 msec. to 200 msec. while
+ * processing interrupts.
+ *
+ * 18 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
+ * Improved abort handling during the eh recovery process.
+ *
+ * 13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
+ * The driver is now fully SMP safe, including the
+ * abort and reset routines.
+ * Added command line options (eh:[y|n]) to choose between
+ * new_eh_code and the old scsi code.
+ * If linux version >= 2.1.101 the default is eh:y, while the eh
+ * option is ignored for previous releases and the old scsi code
+ * is used.
+ *
+ * 18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
+ * Reworked interrupt handler.
+ *
+ * 11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
+ * Major reliability improvement: when a batch with overlapping
+ * requests is detected, requests are queued one at a time
+ * eliminating any possible board or drive reordering.
+ *
+ * 10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
+ * Improved SMP support (if linux version >= 2.1.95).
+ *
+ * 9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
+ * Performance improvement: when sequential i/o is detected,
+ * always use direct sort instead of reverse sort.
+ *
+ * 4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
+ * io_port is now unsigned long.
+ *
+ * 17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
+ * Use new scsi error handling code (if linux version >= 2.1.88).
+ * Use new interrupt code.
+ *
+ * 12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
+ * Use of udelay inside the wait loops to avoid timeout
+ * problems with fast cpus.
+ * Removed check about useless calls to the interrupt service
+ * routine (reported on SMP systems only).
+ * At initialization time "sorted/unsorted" is displayed instead
+ * of "linked/unlinked" to reinforce the fact that "linking" is
+ * nothing but "elevator sorting" in the actual implementation.
+ *
+ * 17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
+ * Use of serial_number_at_timeout in abort and reset processing.
+ * Use of the __initfunc and __initdata macro in setup code.
+ * Minor cleanups in the list_statistics code.
+ *
+ * 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
+ * When loading as a module, parameter passing is now supported
+ * both in 2.0 and in 2.1 style.
+ * Fixed data transfer direction for some SCSI opcodes.
+ * Immediate acknowledge to request sense commands.
+ * Linked commands to each disk device are now reordered by elevator
+ * sorting. Rare cases in which reordering of write requests could
+ * cause wrong results are managed.
+ *
+ * 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
+ * Added command line options to enable/disable linked commands
+ * (lc:[y|n]), old firmware support (of:[y|n]) and to set the max
+ * queue depth (mq:xx). Default is "u14-34f=lc:n,of:n,mq:8".
+ * Improved command linking.
+ *
+ * 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
+ * Added linked command support.
+ *
+ * 3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
+ * Added queue depth adjustment.
+ *
+ * 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
+ * The list of i/o ports to be probed can be overwritten by the
+ * "u14-34f=port0,port1,...." boot command line option.
+ * Scatter/gather lists are now allocated by a number of kmalloc
+ * calls, in order to avoid the previous size limit of 64Kb.
+ *
+ * 16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
+ * Added multichannel support.
+ *
+ * 27 Sep 1996 rev. 2.12 for linux 2.1.0
+ * Portability cleanups (virtual/bus addressing, little/big endian
+ * support).
+ *
+ * 09 Jul 1996 rev. 2.11 for linux 2.0.4
+ * "Data over/under-run" no longer implies a redo on all targets.
+ * Number of internal retries is now limited.
+ *
+ * 16 Apr 1996 rev. 2.10 for linux 1.3.90
+ * New argument "reset_flags" to the reset routine.
+ *
+ * 21 Jul 1995 rev. 2.02 for linux 1.3.11
+ * Fixed Data Transfer Direction for some SCSI commands.
+ *
+ * 13 Jun 1995 rev. 2.01 for linux 1.2.10
+ * HAVE_OLD_UX4F_FIRMWARE should be defined for U34F boards when
+ * the firmware prom is not the latest one (28008-006).
+ *
+ * 11 Mar 1995 rev. 2.00 for linux 1.2.0
+ * Fixed a bug which prevented media change detection for removable
+ * disk drives.
+ *
+ * 23 Feb 1995 rev. 1.18 for linux 1.1.94
+ * Added a check for scsi_register returning NULL.
+ *
+ * 11 Feb 1995 rev. 1.17 for linux 1.1.91
+ * U14F qualified to run with 32 sglists.
+ * Now DEBUG_RESET is disabled by default.
+ *
+ * 9 Feb 1995 rev. 1.16 for linux 1.1.90
+ * Use host->wish_block instead of host->block.
+ *
+ * 8 Feb 1995 rev. 1.15 for linux 1.1.89
+ * Cleared target_time_out counter while performing a reset.
+ *
+ * 28 Jan 1995 rev. 1.14 for linux 1.1.86
+ * Added module support.
+ * Log and do a retry when a disk drive returns a target status
+ * different from zero on a recovered error.
+ * Auto detects if U14F boards have an old firmware revision.
+ * Max number of scatter/gather lists set to 16 for all boards
+ * (most installation run fine using 33 sglists, while other
+ * has problems when using more than 16).
+ *
+ * 16 Jan 1995 rev. 1.13 for linux 1.1.81
+ * Display a message if check_region detects a port address
+ * already in use.
+ *
+ * 15 Dec 1994 rev. 1.12 for linux 1.1.74
+ * The host->block flag is set for all the detected ISA boards.
+ *
+ * 30 Nov 1994 rev. 1.11 for linux 1.1.68
+ * Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
+ * Added optional support for using a single board at a time.
+ *
+ * 14 Nov 1994 rev. 1.10 for linux 1.1.63
+ *
+ * 28 Oct 1994 rev. 1.09 for linux 1.1.58 Final BETA release.
+ * 16 Jul 1994 rev. 1.00 for linux 1.1.29 Initial ALPHA release.
+ *
+ * This driver is a total replacement of the original UltraStor
+ * scsi driver, but it supports ONLY the 14F and 34F boards.
+ * It can be configured in the same kernel in which the original
+ * ultrastor driver is configured to allow the original U24F
+ * support.
+ *
+ * Multiple U14F and/or U34F host adapters are supported.
+ *
+ * Copyright (C) 1994-2003 Dario Ballabio (ballabio_dario@emc.com)
+ *
+ * Alternate email: dario.ballabio@inwind.it, dario.ballabio@tiscalinet.it
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that redistributions of source
+ * code retain the above copyright notice and this comment without
+ * modification.
+ *
+ * WARNING: if your 14/34F board has an old firmware revision (see below)
+ * you must change "#undef" into "#define" in the following
+ * statement.
+ */
+#undef HAVE_OLD_UX4F_FIRMWARE
+/*
+ * The UltraStor 14F, 24F, and 34F are a family of intelligent, high
+ * performance SCSI-2 host adapters.
+ * Here is the scoop on the various models:
+ *
+ * 14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
+ * 24F - EISA Bus Master HA with floppy support and WD1003 emulation.
+ * 34F - VESA Local-Bus Bus Master HA (no WD1003 emulation).
+ *
+ * This code has been tested with up to two U14F boards, using both
+ * firmware 28004-005/38004-004 (BIOS rev. 2.00) and the latest firmware
+ * 28004-006/38004-005 (BIOS rev. 2.01).
+ *
+ * The latest firmware is required in order to get reliable operations when
+ * clustering is enabled. ENABLE_CLUSTERING provides a performance increase
+ * up to 50% on sequential access.
+ *
+ * Since the Scsi_Host_Template structure is shared among all 14F and 34F,
+ * the last setting of use_clustering is in effect for all of these boards.
+ *
+ * Here a sample configuration using two U14F boards:
+ *
+ U14F0: ISA 0x330, BIOS 0xc8000, IRQ 11, DMA 5, SG 32, MB 16, of:n, lc:y, mq:8.
+ U14F1: ISA 0x340, BIOS 0x00000, IRQ 10, DMA 6, SG 32, MB 16, of:n, lc:y, mq:8.
+ *
+ * The boot controller must have its BIOS enabled, while other boards can
+ * have their BIOS disabled, or enabled to an higher address.
+ * Boards are named Ux4F0, Ux4F1..., according to the port address order in
+ * the io_port[] array.
+ *
+ * The following facts are based on real testing results (not on
+ * documentation) on the above U14F board.
+ *
+ * - The U14F board should be jumpered for bus on time less or equal to 7
+ * microseconds, while the default is 11 microseconds. This is order to
+ * get acceptable performance while using floppy drive and hard disk
+ * together. The jumpering for 7 microseconds is: JP13 pin 15-16,
+ * JP14 pin 7-8 and pin 9-10.
+ * The reduction has a little impact on scsi performance.
+ *
+ * - If scsi bus length exceeds 3m., the scsi bus speed needs to be reduced
+ * from 10Mhz to 5Mhz (do this by inserting a jumper on JP13 pin 7-8).
+ *
+ * - If U14F on board firmware is older than 28004-006/38004-005,
+ * the U14F board is unable to provide reliable operations if the scsi
+ * request length exceeds 16Kbyte. When this length is exceeded the
+ * behavior is:
+ * - adapter_status equal 0x96 or 0xa3 or 0x93 or 0x94;
+ * - adapter_status equal 0 and target_status equal 2 on for all targets
+ * in the next operation following the reset.
+ * This sequence takes a long time (>3 seconds), so in the meantime
+ * the SD_TIMEOUT in sd.c could expire giving rise to scsi aborts
+ * (SD_TIMEOUT has been increased from 3 to 6 seconds in 1.1.31).
+ * Because of this I had to DISABLE_CLUSTERING and to work around the
+ * bus reset in the interrupt service routine, returning DID_BUS_BUSY
+ * so that the operations are retried without complains from the scsi.c
+ * code.
+ * Any reset of the scsi bus is going to kill tape operations, since
+ * no retry is allowed for tapes. Bus resets are more likely when the
+ * scsi bus is under heavy load.
+ * Requests using scatter/gather have a maximum length of 16 x 1024 bytes
+ * when DISABLE_CLUSTERING is in effect, but unscattered requests could be
+ * larger than 16Kbyte.
+ *
+ * The new firmware has fixed all the above problems.
+ *
+ * For U34F boards the latest bios prom is 38008-002 (BIOS rev. 2.01),
+ * the latest firmware prom is 28008-006. Older firmware 28008-005 has
+ * problems when using more than 16 scatter/gather lists.
+ *
+ * The list of i/o ports to be probed can be totally replaced by the
+ * boot command line option: "u14-34f=port0,port1,port2,...", where the
+ * port0, port1... arguments are ISA/VESA addresses to be probed.
+ * For example using "u14-34f=0x230,0x340", the driver probes only the two
+ * addresses 0x230 and 0x340 in this order; "u14-34f=0" totally disables
+ * this driver.
+ *
+ * After the optional list of detection probes, other possible command line
+ * options are:
+ *
+ * et:y use disk geometry returned by scsicam_bios_param;
+ * et:n use disk geometry jumpered on the board;
+ * lc:y enables linked commands;
+ * lc:n disables linked commands;
+ * tm:0 disables tagged commands (same as tc:n);
+ * tm:1 use simple queue tags (same as tc:y);
+ * tm:2 use ordered queue tags (same as tc:2);
+ * of:y enables old firmware support;
+ * of:n disables old firmware support;
+ * mq:xx set the max queue depth to the value xx (2 <= xx <= 8).
+ *
+ * The default value is: "u14-34f=lc:n,of:n,mq:8,tm:0,et:n".
+ * An example using the list of detection probes could be:
+ * "u14-34f=0x230,0x340,lc:y,tm:2,of:n,mq:4,et:n".
+ *
+ * When loading as a module, parameters can be specified as well.
+ * The above example would be (use 1 in place of y and 0 in place of n):
+ *
+ * modprobe u14-34f io_port=0x230,0x340 linked_comm=1 have_old_firmware=0 \
+ * max_queue_depth=4 ext_tran=0 tag_mode=2
+ *
+ * ----------------------------------------------------------------------------
+ * In this implementation, linked commands are designed to work with any DISK
+ * or CD-ROM, since this linking has only the intent of clustering (time-wise)
+ * and reordering by elevator sorting commands directed to each device,
+ * without any relation with the actual SCSI protocol between the controller
+ * and the device.
+ * If Q is the queue depth reported at boot time for each device (also named
+ * cmds/lun) and Q > 2, whenever there is already an active command to the
+ * device all other commands to the same device (up to Q-1) are kept waiting
+ * in the elevator sorting queue. When the active command completes, the
+ * commands in this queue are sorted by sector address. The sort is chosen
+ * between increasing or decreasing by minimizing the seek distance between
+ * the sector of the commands just completed and the sector of the first
+ * command in the list to be sorted.
+ * Trivial math assures that the unsorted average seek distance when doing
+ * random seeks over S sectors is S/3.
+ * When (Q-1) requests are uniformly distributed over S sectors, the average
+ * distance between two adjacent requests is S/((Q-1) + 1), so the sorted
+ * average seek distance for (Q-1) random requests over S sectors is S/Q.
+ * The elevator sorting hence divides the seek distance by a factor Q/3.
+ * The above pure geometric remarks are valid in all cases and the
+ * driver effectively reduces the seek distance by the predicted factor
+ * when there are Q concurrent read i/o operations on the device, but this
+ * does not necessarily results in a noticeable performance improvement:
+ * your mileage may vary....
+ *
+ * Note: command reordering inside a batch of queued commands could cause
+ * wrong results only if there is at least one write request and the
+ * intersection (sector-wise) of all requests is not empty.
+ * When the driver detects a batch including overlapping requests
+ * (a really rare event) strict serial (pid) order is enforced.
+ * ----------------------------------------------------------------------------
+ *
+ * The boards are named Ux4F0, Ux4F1,... according to the detection order.
+ *
+ * In order to support multiple ISA boards in a reliable way,
+ * the driver sets host->wish_block = TRUE for all ISA boards.
+ */
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <linux/proc_fs.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/stat.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsicam.h>
+
+static int u14_34f_detect(struct scsi_host_template *);
+static int u14_34f_release(struct Scsi_Host *);
+static int u14_34f_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+static int u14_34f_eh_abort(struct scsi_cmnd *);
+static int u14_34f_eh_host_reset(struct scsi_cmnd *);
+static int u14_34f_bios_param(struct scsi_device *, struct block_device *,
+ sector_t, int *);
+static int u14_34f_slave_configure(struct scsi_device *);
+
+static struct scsi_host_template driver_template = {
+ .name = "UltraStor 14F/34F rev. 8.10.00 ",
+ .detect = u14_34f_detect,
+ .release = u14_34f_release,
+ .queuecommand = u14_34f_queuecommand,
+ .eh_abort_handler = u14_34f_eh_abort,
+ .eh_device_reset_handler = NULL,
+ .eh_bus_reset_handler = NULL,
+ .eh_host_reset_handler = u14_34f_eh_host_reset,
+ .bios_param = u14_34f_bios_param,
+ .slave_configure = u14_34f_slave_configure,
+ .this_id = 7,
+ .unchecked_isa_dma = 1,
+ .use_clustering = ENABLE_CLUSTERING
+ };
+
+#if !defined(__BIG_ENDIAN_BITFIELD) && !defined(__LITTLE_ENDIAN_BITFIELD)
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+
+/* Values for the PRODUCT_ID ports for the 14/34F */
+#define PRODUCT_ID1 0x56
+#define PRODUCT_ID2 0x40 /* NOTE: Only upper nibble is used */
+
+/* Subversion values */
+#define ISA 0
+#define ESA 1
+
+#define OP_HOST_ADAPTER 0x1
+#define OP_SCSI 0x2
+#define OP_RESET 0x4
+#define DTD_SCSI 0x0
+#define DTD_IN 0x1
+#define DTD_OUT 0x2
+#define DTD_NONE 0x3
+#define HA_CMD_INQUIRY 0x1
+#define HA_CMD_SELF_DIAG 0x2
+#define HA_CMD_READ_BUFF 0x3
+#define HA_CMD_WRITE_BUFF 0x4
+
+#undef DEBUG_LINKED_COMMANDS
+#undef DEBUG_DETECT
+#undef DEBUG_INTERRUPT
+#undef DEBUG_RESET
+#undef DEBUG_GENERATE_ERRORS
+#undef DEBUG_GENERATE_ABORTS
+#undef DEBUG_GEOMETRY
+
+#define MAX_ISA 3
+#define MAX_VESA 1
+#define MAX_EISA 0
+#define MAX_PCI 0
+#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
+#define MAX_CHANNEL 1
+#define MAX_LUN 8
+#define MAX_TARGET 8
+#define MAX_MAILBOXES 16
+#define MAX_SGLIST 32
+#define MAX_SAFE_SGLIST 16
+#define MAX_INTERNAL_RETRIES 64
+#define MAX_CMD_PER_LUN 2
+#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
+
+#define SKIP ULONG_MAX
+#define FALSE 0
+#define TRUE 1
+#define FREE 0
+#define IN_USE 1
+#define LOCKED 2
+#define IN_RESET 3
+#define IGNORE 4
+#define READY 5
+#define ABORTING 6
+#define NO_DMA 0xff
+#define MAXLOOP 10000
+#define TAG_DISABLED 0
+#define TAG_SIMPLE 1
+#define TAG_ORDERED 2
+
+#define REG_LCL_MASK 0
+#define REG_LCL_INTR 1
+#define REG_SYS_MASK 2
+#define REG_SYS_INTR 3
+#define REG_PRODUCT_ID1 4
+#define REG_PRODUCT_ID2 5
+#define REG_CONFIG1 6
+#define REG_CONFIG2 7
+#define REG_OGM 8
+#define REG_ICM 12
+#define REGION_SIZE 13UL
+#define BSY_ASSERTED 0x01
+#define IRQ_ASSERTED 0x01
+#define CMD_RESET 0xc0
+#define CMD_OGM_INTR 0x01
+#define CMD_CLR_INTR 0x01
+#define CMD_ENA_INTR 0x81
+#define ASOK 0x00
+#define ASST 0x91
+
+#define YESNO(a) ((a) ? 'y' : 'n')
+#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
+
+#define PACKED __attribute__((packed))
+
+struct sg_list {
+ unsigned int address; /* Segment Address */
+ unsigned int num_bytes; /* Segment Length */
+ };
+
+/* MailBox SCSI Command Packet */
+struct mscp {
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+ unsigned char sg:1, ca:1, dcn:1, xdir:2, opcode:3;
+ unsigned char lun: 3, channel:2, target:3;
+#else
+ unsigned char opcode: 3, /* type of command */
+ xdir: 2, /* data transfer direction */
+ dcn: 1, /* disable disconnect */
+ ca: 1, /* use cache (if available) */
+ sg: 1; /* scatter/gather operation */
+ unsigned char target: 3, /* SCSI target id */
+ channel: 2, /* SCSI channel number */
+ lun: 3; /* SCSI logical unit number */
+#endif
+
+ unsigned int data_address PACKED; /* transfer data pointer */
+ unsigned int data_len PACKED; /* length in bytes */
+ unsigned int link_address PACKED; /* for linking command chains */
+ unsigned char clink_id; /* identifies command in chain */
+ unsigned char use_sg; /* (if sg is set) 8 bytes per list */
+ unsigned char sense_len;
+ unsigned char cdb_len; /* 6, 10, or 12 */
+ unsigned char cdb[12]; /* SCSI Command Descriptor Block */
+ unsigned char adapter_status; /* non-zero indicates HA error */
+ unsigned char target_status; /* non-zero indicates target error */
+ unsigned int sense_addr PACKED;
+
+ /* Additional fields begin here. */
+ struct scsi_cmnd *SCpnt;
+ unsigned int cpp_index; /* cp index */
+
+ /* All the cp structure is zero filled by queuecommand except the
+ following CP_TAIL_SIZE bytes, initialized by detect */
+ dma_addr_t cp_dma_addr; /* dma handle for this cp structure */
+ struct sg_list *sglist; /* pointer to the allocated SG list */
+ };
+
+#define CP_TAIL_SIZE (sizeof(struct sglist *) + sizeof(dma_addr_t))
+
+struct hostdata {
+ struct mscp cp[MAX_MAILBOXES]; /* Mailboxes for this board */
+ unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
+ unsigned int last_cp_used; /* Index of last mailbox used */
+ unsigned int iocount; /* Total i/o done for this board */
+ int board_number; /* Number of this board */
+ char board_name[16]; /* Name of this board */
+ int in_reset; /* True if board is doing a reset */
+ int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
+ int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If TRUE redo i/o on target */
+ unsigned int retries; /* Number of internal retries */
+ unsigned long last_retried_pid; /* Pid of last retried command */
+ unsigned char subversion; /* Bus type, either ISA or ESA */
+ struct pci_dev *pdev; /* Always NULL */
+ unsigned char heads;
+ unsigned char sectors;
+ char board_id[256]; /* data from INQUIRY on this board */
+ };
+
+static struct Scsi_Host *sh[MAX_BOARDS + 1];
+static const char *driver_name = "Ux4F";
+static char sha[MAX_BOARDS];
+static DEFINE_SPINLOCK(driver_lock);
+
+/* Initialize num_boards so that ihdlr can work while detect is in progress */
+static unsigned int num_boards = MAX_BOARDS;
+
+static unsigned long io_port[] = {
+
+ /* Space for MAX_INT_PARAM ports usable while loading as a module */
+ SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
+ SKIP, SKIP,
+
+ /* Possible ISA/VESA ports */
+ 0x330, 0x340, 0x230, 0x240, 0x210, 0x130, 0x140,
+
+ /* End of list */
+ 0x0
+ };
+
+#define HD(board) ((struct hostdata *) &sh[board]->hostdata)
+#define BN(board) (HD(board)->board_name)
+
+/* Device is Little Endian */
+#define H2DEV(x) cpu_to_le32(x)
+#define DEV2H(x) le32_to_cpu(x)
+
+static irqreturn_t do_interrupt_handler(int, void *, struct pt_regs *);
+static void flush_dev(struct scsi_device *, unsigned long, unsigned int, unsigned int);
+static int do_trace = FALSE;
+static int setup_done = FALSE;
+static int link_statistics;
+static int ext_tran = FALSE;
+
+#if defined(HAVE_OLD_UX4F_FIRMWARE)
+static int have_old_firmware = TRUE;
+#else
+static int have_old_firmware = FALSE;
+#endif
+
+#if defined(CONFIG_SCSI_U14_34F_TAGGED_QUEUE)
+static int tag_mode = TAG_SIMPLE;
+#else
+static int tag_mode = TAG_DISABLED;
+#endif
+
+#if defined(CONFIG_SCSI_U14_34F_LINKED_COMMANDS)
+static int linked_comm = TRUE;
+#else
+static int linked_comm = FALSE;
+#endif
+
+#if defined(CONFIG_SCSI_U14_34F_MAX_TAGS)
+static int max_queue_depth = CONFIG_SCSI_U14_34F_MAX_TAGS;
+#else
+static int max_queue_depth = MAX_CMD_PER_LUN;
+#endif
+
+#define MAX_INT_PARAM 10
+#define MAX_BOOT_OPTIONS_SIZE 256
+static char boot_options[MAX_BOOT_OPTIONS_SIZE];
+
+#if defined(MODULE)
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+module_param_string(u14_34f, boot_options, MAX_BOOT_OPTIONS_SIZE, 0);
+MODULE_PARM_DESC(u14_34f, " equivalent to the \"u14-34f=...\" kernel boot " \
+"option." \
+" Example: modprobe u14-34f \"u14_34f=0x340,0x330,lc:y,tm:0,mq:4\"");
+MODULE_AUTHOR("Dario Ballabio");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("UltraStor 14F/34F SCSI Driver");
+
+#endif
+
+static int u14_34f_slave_configure(struct scsi_device *dev) {
+ int j, tqd, utqd;
+ char *tag_suffix, *link_suffix;
+ struct Scsi_Host *host = dev->host;
+
+ j = ((struct hostdata *) host->hostdata)->board_number;
+
+ utqd = MAX_CMD_PER_LUN;
+ tqd = max_queue_depth;
+
+ if (TLDEV(dev->type) && dev->tagged_supported)
+
+ if (tag_mode == TAG_SIMPLE) {
+ scsi_adjust_queue_depth(dev, MSG_SIMPLE_TAG, tqd);
+ tag_suffix = ", simple tags";
+ }
+ else if (tag_mode == TAG_ORDERED) {
+ scsi_adjust_queue_depth(dev, MSG_ORDERED_TAG, tqd);
+ tag_suffix = ", ordered tags";
+ }
+ else {
+ scsi_adjust_queue_depth(dev, 0, tqd);
+ tag_suffix = ", no tags";
+ }
+
+ else if (TLDEV(dev->type) && linked_comm) {
+ scsi_adjust_queue_depth(dev, 0, tqd);
+ tag_suffix = ", untagged";
+ }
+
+ else {
+ scsi_adjust_queue_depth(dev, 0, utqd);
+ tag_suffix = "";
+ }
+
+ if (TLDEV(dev->type) && linked_comm && dev->queue_depth > 2)
+ link_suffix = ", sorted";
+ else if (TLDEV(dev->type))
+ link_suffix = ", unsorted";
+ else
+ link_suffix = "";
+
+ printk("%s: scsi%d, channel %d, id %d, lun %d, cmds/lun %d%s%s.\n",
+ BN(j), host->host_no, dev->channel, dev->id, dev->lun,
+ dev->queue_depth, link_suffix, tag_suffix);
+
+ return FALSE;
+}
+
+static int wait_on_busy(unsigned long iobase, unsigned int loop) {
+
+ while (inb(iobase + REG_LCL_INTR) & BSY_ASSERTED) {
+ udelay(1L);
+ if (--loop == 0) return TRUE;
+ }
+
+ return FALSE;
+}
+
+static int board_inquiry(unsigned int j) {
+ struct mscp *cpp;
+ dma_addr_t id_dma_addr;
+ unsigned int time, limit = 0;
+
+ id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id,
+ sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL);
+ cpp = &HD(j)->cp[0];
+ cpp->cp_dma_addr = pci_map_single(HD(j)->pdev, cpp, sizeof(struct mscp),
+ PCI_DMA_BIDIRECTIONAL);
+ memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
+ cpp->opcode = OP_HOST_ADAPTER;
+ cpp->xdir = DTD_IN;
+ cpp->data_address = H2DEV(id_dma_addr);
+ cpp->data_len = H2DEV(sizeof(HD(j)->board_id));
+ cpp->cdb_len = 6;
+ cpp->cdb[0] = HA_CMD_INQUIRY;
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ printk("%s: board_inquiry, adapter busy.\n", BN(j));
+ return TRUE;
+ }
+
+ HD(j)->cp_stat[0] = IGNORE;
+
+ /* Clear the interrupt indication */
+ outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+
+ /* Store pointer in OGM address bytes */
+ outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
+
+ /* Issue OGM interrupt */
+ outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+
+ spin_unlock_irq(&driver_lock);
+ time = jiffies;
+ while ((jiffies - time) < HZ && limit++ < 20000) udelay(100L);
+ spin_lock_irq(&driver_lock);
+
+ if (cpp->adapter_status || HD(j)->cp_stat[0] != FREE) {
+ HD(j)->cp_stat[0] = FREE;
+ printk("%s: board_inquiry, err 0x%x.\n", BN(j), cpp->adapter_status);
+ return TRUE;
+ }
+
+ pci_unmap_single(HD(j)->pdev, cpp->cp_dma_addr, sizeof(struct mscp),
+ PCI_DMA_BIDIRECTIONAL);
+ pci_unmap_single(HD(j)->pdev, id_dma_addr, sizeof(HD(j)->board_id),
+ PCI_DMA_BIDIRECTIONAL);
+ return FALSE;
+}
+
+static int port_detect \
+ (unsigned long port_base, unsigned int j, struct scsi_host_template *tpnt) {
+ unsigned char irq, dma_channel, subversion, i;
+ unsigned char in_byte;
+ char *bus_type, dma_name[16];
+
+ /* Allowed BIOS base addresses (NULL indicates reserved) */
+ unsigned long bios_segment_table[8] = {
+ 0,
+ 0xc4000, 0xc8000, 0xcc000, 0xd0000,
+ 0xd4000, 0xd8000, 0xdc000
+ };
+
+ /* Allowed IRQs */
+ unsigned char interrupt_table[4] = { 15, 14, 11, 10 };
+
+ /* Allowed DMA channels for ISA (0 indicates reserved) */
+ unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
+
+ /* Head/sector mappings */
+ struct {
+ unsigned char heads;
+ unsigned char sectors;
+ } mapping_table[4] = {
+ { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 }
+ };
+
+ struct config_1 {
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+ unsigned char dma_channel: 2, interrupt:2,
+ removable_disks_as_fixed:1, bios_segment: 3;
+#else
+ unsigned char bios_segment: 3, removable_disks_as_fixed: 1,
+ interrupt: 2, dma_channel: 2;
+#endif
+
+ } config_1;
+
+ struct config_2 {
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+ unsigned char tfr_port: 2, bios_drive_number: 1,
+ mapping_mode: 2, ha_scsi_id: 3;
+#else
+ unsigned char ha_scsi_id: 3, mapping_mode: 2,
+ bios_drive_number: 1, tfr_port: 2;
+#endif
+
+ } config_2;
+
+ char name[16];
+
+ sprintf(name, "%s%d", driver_name, j);
+
+ if (!request_region(port_base, REGION_SIZE, driver_name)) {
+#if defined(DEBUG_DETECT)
+ printk("%s: address 0x%03lx in use, skipping probe.\n", name, port_base);
+#endif
+ goto fail;
+ }
+
+ spin_lock_irq(&driver_lock);
+
+ if (inb(port_base + REG_PRODUCT_ID1) != PRODUCT_ID1) goto freelock;
+
+ in_byte = inb(port_base + REG_PRODUCT_ID2);
+
+ if ((in_byte & 0xf0) != PRODUCT_ID2) goto freelock;
+
+ *(char *)&config_1 = inb(port_base + REG_CONFIG1);
+ *(char *)&config_2 = inb(port_base + REG_CONFIG2);
+
+ irq = interrupt_table[config_1.interrupt];
+ dma_channel = dma_channel_table[config_1.dma_channel];
+ subversion = (in_byte & 0x0f);
+
+ /* Board detected, allocate its IRQ */
+ if (request_irq(irq, do_interrupt_handler,
+ SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+ driver_name, (void *) &sha[j])) {
+ printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
+ goto freelock;
+ }
+
+ if (subversion == ISA && request_dma(dma_channel, driver_name)) {
+ printk("%s: unable to allocate DMA channel %u, detaching.\n",
+ name, dma_channel);
+ goto freeirq;
+ }
+
+ if (have_old_firmware) tpnt->use_clustering = DISABLE_CLUSTERING;
+
+ spin_unlock_irq(&driver_lock);
+ sh[j] = scsi_register(tpnt, sizeof(struct hostdata));
+ spin_lock_irq(&driver_lock);
+
+ if (sh[j] == NULL) {
+ printk("%s: unable to register host, detaching.\n", name);
+ goto freedma;
+ }
+
+ sh[j]->io_port = port_base;
+ sh[j]->unique_id = port_base;
+ sh[j]->n_io_port = REGION_SIZE;
+ sh[j]->base = bios_segment_table[config_1.bios_segment];
+ sh[j]->irq = irq;
+ sh[j]->sg_tablesize = MAX_SGLIST;
+ sh[j]->this_id = config_2.ha_scsi_id;
+ sh[j]->can_queue = MAX_MAILBOXES;
+ sh[j]->cmd_per_lun = MAX_CMD_PER_LUN;
+
+#if defined(DEBUG_DETECT)
+ {
+ unsigned char sys_mask, lcl_mask;
+
+ sys_mask = inb(sh[j]->io_port + REG_SYS_MASK);
+ lcl_mask = inb(sh[j]->io_port + REG_LCL_MASK);
+ printk("SYS_MASK 0x%x, LCL_MASK 0x%x.\n", sys_mask, lcl_mask);
+ }
+#endif
+
+ /* Probably a bogus host scsi id, set it to the dummy value */
+ if (sh[j]->this_id == 0) sh[j]->this_id = -1;
+
+ /* If BIOS is disabled, force enable interrupts */
+ if (sh[j]->base == 0) outb(CMD_ENA_INTR, sh[j]->io_port + REG_SYS_MASK);
+
+ memset(HD(j), 0, sizeof(struct hostdata));
+ HD(j)->heads = mapping_table[config_2.mapping_mode].heads;
+ HD(j)->sectors = mapping_table[config_2.mapping_mode].sectors;
+ HD(j)->subversion = subversion;
+ HD(j)->pdev = NULL;
+ HD(j)->board_number = j;
+
+ if (have_old_firmware) sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
+
+ if (HD(j)->subversion == ESA) {
+ sh[j]->unchecked_isa_dma = FALSE;
+ sh[j]->dma_channel = NO_DMA;
+ sprintf(BN(j), "U34F%d", j);
+ bus_type = "VESA";
+ }
+ else {
+ unsigned long flags;
+ sh[j]->unchecked_isa_dma = TRUE;
+
+ flags=claim_dma_lock();
+ disable_dma(dma_channel);
+ clear_dma_ff(dma_channel);
+ set_dma_mode(dma_channel, DMA_MODE_CASCADE);
+ enable_dma(dma_channel);
+ release_dma_lock(flags);
+
+ sh[j]->dma_channel = dma_channel;
+ sprintf(BN(j), "U14F%d", j);
+ bus_type = "ISA";
+ }
+
+ sh[j]->max_channel = MAX_CHANNEL - 1;
+ sh[j]->max_id = MAX_TARGET;
+ sh[j]->max_lun = MAX_LUN;
+
+ if (HD(j)->subversion == ISA && !board_inquiry(j)) {
+ HD(j)->board_id[40] = 0;
+
+ if (strcmp(&HD(j)->board_id[32], "06000600")) {
+ printk("%s: %s.\n", BN(j), &HD(j)->board_id[8]);
+ printk("%s: firmware %s is outdated, FW PROM should be 28004-006.\n",
+ BN(j), &HD(j)->board_id[32]);
+ sh[j]->hostt->use_clustering = DISABLE_CLUSTERING;
+ sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
+ }
+ }
+
+ if (dma_channel == NO_DMA) sprintf(dma_name, "%s", "BMST");
+ else sprintf(dma_name, "DMA %u", dma_channel);
+
+ spin_unlock_irq(&driver_lock);
+
+ for (i = 0; i < sh[j]->can_queue; i++)
+ HD(j)->cp[i].cp_dma_addr = pci_map_single(HD(j)->pdev,
+ &HD(j)->cp[i], sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
+
+ for (i = 0; i < sh[j]->can_queue; i++)
+ if (! ((&HD(j)->cp[i])->sglist = kmalloc(
+ sh[j]->sg_tablesize * sizeof(struct sg_list),
+ (sh[j]->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC))) {
+ printk("%s: kmalloc SGlist failed, mbox %d, detaching.\n", BN(j), i);
+ goto release;
+ }
+
+ if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
+ max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
+
+ if (max_queue_depth < MAX_CMD_PER_LUN) max_queue_depth = MAX_CMD_PER_LUN;
+
+ if (tag_mode != TAG_DISABLED && tag_mode != TAG_SIMPLE)
+ tag_mode = TAG_ORDERED;
+
+ if (j == 0) {
+ printk("UltraStor 14F/34F: Copyright (C) 1994-2003 Dario Ballabio.\n");
+ printk("%s config options -> of:%c, tm:%d, lc:%c, mq:%d, et:%c.\n",
+ driver_name, YESNO(have_old_firmware), tag_mode,
+ YESNO(linked_comm), max_queue_depth, YESNO(ext_tran));
+ }
+
+ printk("%s: %s 0x%03lx, BIOS 0x%05x, IRQ %u, %s, SG %d, MB %d.\n",
+ BN(j), bus_type, (unsigned long)sh[j]->io_port, (int)sh[j]->base,
+ sh[j]->irq, dma_name, sh[j]->sg_tablesize, sh[j]->can_queue);
+
+ if (sh[j]->max_id > 8 || sh[j]->max_lun > 8)
+ printk("%s: wide SCSI support enabled, max_id %u, max_lun %u.\n",
+ BN(j), sh[j]->max_id, sh[j]->max_lun);
+
+ for (i = 0; i <= sh[j]->max_channel; i++)
+ printk("%s: SCSI channel %u enabled, host target ID %d.\n",
+ BN(j), i, sh[j]->this_id);
+
+ return TRUE;
+
+freedma:
+ if (subversion == ISA) free_dma(dma_channel);
+freeirq:
+ free_irq(irq, &sha[j]);
+freelock:
+ spin_unlock_irq(&driver_lock);
+ release_region(port_base, REGION_SIZE);
+fail:
+ return FALSE;
+
+release:
+ u14_34f_release(sh[j]);
+ return FALSE;
+}
+
+static void internal_setup(char *str, int *ints) {
+ int i, argc = ints[0];
+ char *cur = str, *pc;
+
+ if (argc > 0) {
+
+ if (argc > MAX_INT_PARAM) argc = MAX_INT_PARAM;
+
+ for (i = 0; i < argc; i++) io_port[i] = ints[i + 1];
+
+ io_port[i] = 0;
+ setup_done = TRUE;
+ }
+
+ while (cur && (pc = strchr(cur, ':'))) {
+ int val = 0, c = *++pc;
+
+ if (c == 'n' || c == 'N') val = FALSE;
+ else if (c == 'y' || c == 'Y') val = TRUE;
+ else val = (int) simple_strtoul(pc, NULL, 0);
+
+ if (!strncmp(cur, "lc:", 3)) linked_comm = val;
+ else if (!strncmp(cur, "of:", 3)) have_old_firmware = val;
+ else if (!strncmp(cur, "tm:", 3)) tag_mode = val;
+ else if (!strncmp(cur, "tc:", 3)) tag_mode = val;
+ else if (!strncmp(cur, "mq:", 3)) max_queue_depth = val;
+ else if (!strncmp(cur, "ls:", 3)) link_statistics = val;
+ else if (!strncmp(cur, "et:", 3)) ext_tran = val;
+
+ if ((cur = strchr(cur, ','))) ++cur;
+ }
+
+ return;
+}
+
+static int option_setup(char *str) {
+ int ints[MAX_INT_PARAM];
+ char *cur = str;
+ int i = 1;
+
+ while (cur && isdigit(*cur) && i <= MAX_INT_PARAM) {
+ ints[i++] = simple_strtoul(cur, NULL, 0);
+
+ if ((cur = strchr(cur, ',')) != NULL) cur++;
+ }
+
+ ints[0] = i - 1;
+ internal_setup(cur, ints);
+ return 1;
+}
+
+static int u14_34f_detect(struct scsi_host_template *tpnt) {
+ unsigned int j = 0, k;
+
+ tpnt->proc_name = "u14-34f";
+
+ if(strlen(boot_options)) option_setup(boot_options);
+
+#if defined(MODULE)
+ /* io_port could have been modified when loading as a module */
+ if(io_port[0] != SKIP) {
+ setup_done = TRUE;
+ io_port[MAX_INT_PARAM] = 0;
+ }
+#endif
+
+ for (k = 0; k < MAX_BOARDS + 1; k++) sh[k] = NULL;
+
+ for (k = 0; io_port[k]; k++) {
+
+ if (io_port[k] == SKIP) continue;
+
+ if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt)) j++;
+ }
+
+ num_boards = j;
+ return j;
+}
+
+static void map_dma(unsigned int i, unsigned int j) {
+ unsigned int data_len = 0;
+ unsigned int k, count, pci_dir;
+ struct scatterlist *sgpnt;
+ struct mscp *cpp;
+ struct scsi_cmnd *SCpnt;
+
+ cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
+ pci_dir = SCpnt->sc_data_direction;
+
+ if (SCpnt->sense_buffer)
+ cpp->sense_addr = H2DEV(pci_map_single(HD(j)->pdev, SCpnt->sense_buffer,
+ sizeof SCpnt->sense_buffer, PCI_DMA_FROMDEVICE));
+
+ cpp->sense_len = sizeof SCpnt->sense_buffer;
+
+ if (!SCpnt->use_sg) {
+
+ /* If we get here with PCI_DMA_NONE, pci_map_single triggers a BUG() */
+ if (!SCpnt->request_bufflen) pci_dir = PCI_DMA_BIDIRECTIONAL;
+
+ if (SCpnt->request_buffer)
+ cpp->data_address = H2DEV(pci_map_single(HD(j)->pdev,
+ SCpnt->request_buffer, SCpnt->request_bufflen, pci_dir));
+
+ cpp->data_len = H2DEV(SCpnt->request_bufflen);
+ return;
+ }
+
+ sgpnt = (struct scatterlist *) SCpnt->request_buffer;
+ count = pci_map_sg(HD(j)->pdev, sgpnt, SCpnt->use_sg, pci_dir);
+
+ for (k = 0; k < count; k++) {
+ cpp->sglist[k].address = H2DEV(sg_dma_address(&sgpnt[k]));
+ cpp->sglist[k].num_bytes = H2DEV(sg_dma_len(&sgpnt[k]));
+ data_len += sgpnt[k].length;
+ }
+
+ cpp->sg = TRUE;
+ cpp->use_sg = SCpnt->use_sg;
+ cpp->data_address = H2DEV(pci_map_single(HD(j)->pdev, cpp->sglist,
+ SCpnt->use_sg * sizeof(struct sg_list), pci_dir));
+ cpp->data_len = H2DEV(data_len);
+}
+
+static void unmap_dma(unsigned int i, unsigned int j) {
+ unsigned int pci_dir;
+ struct mscp *cpp;
+ struct scsi_cmnd *SCpnt;
+
+ cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
+ pci_dir = SCpnt->sc_data_direction;
+
+ if (DEV2H(cpp->sense_addr))
+ pci_unmap_single(HD(j)->pdev, DEV2H(cpp->sense_addr),
+ DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
+
+ if (SCpnt->use_sg)
+ pci_unmap_sg(HD(j)->pdev, SCpnt->request_buffer, SCpnt->use_sg, pci_dir);
+
+ if (!DEV2H(cpp->data_len)) pci_dir = PCI_DMA_BIDIRECTIONAL;
+
+ if (DEV2H(cpp->data_address))
+ pci_unmap_single(HD(j)->pdev, DEV2H(cpp->data_address),
+ DEV2H(cpp->data_len), pci_dir);
+}
+
+static void sync_dma(unsigned int i, unsigned int j) {
+ unsigned int pci_dir;
+ struct mscp *cpp;
+ struct scsi_cmnd *SCpnt;
+
+ cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
+ pci_dir = SCpnt->sc_data_direction;
+
+ if (DEV2H(cpp->sense_addr))
+ pci_dma_sync_single_for_cpu(HD(j)->pdev, DEV2H(cpp->sense_addr),
+ DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
+
+ if (SCpnt->use_sg)
+ pci_dma_sync_sg_for_cpu(HD(j)->pdev, SCpnt->request_buffer,
+ SCpnt->use_sg, pci_dir);
+
+ if (!DEV2H(cpp->data_len)) pci_dir = PCI_DMA_BIDIRECTIONAL;
+
+ if (DEV2H(cpp->data_address))
+ pci_dma_sync_single_for_cpu(HD(j)->pdev, DEV2H(cpp->data_address),
+ DEV2H(cpp->data_len), pci_dir);
+}
+
+static void scsi_to_dev_dir(unsigned int i, unsigned int j) {
+ unsigned int k;
+
+ static const unsigned char data_out_cmds[] = {
+ 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
+ 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
+ 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b, 0x5d
+ };
+
+ static const unsigned char data_none_cmds[] = {
+ 0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
+ 0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
+ 0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5, 0x00
+ };
+
+ struct mscp *cpp;
+ struct scsi_cmnd *SCpnt;
+
+ cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
+
+ if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
+ cpp->xdir = DTD_IN;
+ return;
+ }
+ else if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
+ cpp->xdir = DTD_OUT;
+ return;
+ }
+ else if (SCpnt->sc_data_direction == DMA_NONE) {
+ cpp->xdir = DTD_NONE;
+ return;
+ }
+
+ if (SCpnt->sc_data_direction != DMA_BIDIRECTIONAL)
+ panic("%s: qcomm, invalid SCpnt->sc_data_direction.\n", BN(j));
+
+ cpp->xdir = DTD_IN;
+
+ for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
+ if (SCpnt->cmnd[0] == data_out_cmds[k]) {
+ cpp->xdir = DTD_OUT;
+ break;
+ }
+
+ if (cpp->xdir == DTD_IN)
+ for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
+ if (SCpnt->cmnd[0] == data_none_cmds[k]) {
+ cpp->xdir = DTD_NONE;
+ break;
+ }
+
+}
+
+static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
+ unsigned int i, j, k;
+ struct mscp *cpp;
+
+ /* j is the board number */
+ j = ((struct hostdata *) SCpnt->device->host->hostdata)->board_number;
+
+ if (SCpnt->host_scribble)
+ panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
+ BN(j), SCpnt->pid, SCpnt);
+
+ /* i is the mailbox number, look for the first free mailbox
+ starting from last_cp_used */
+ i = HD(j)->last_cp_used + 1;
+
+ for (k = 0; k < sh[j]->can_queue; k++, i++) {
+
+ if (i >= sh[j]->can_queue) i = 0;
+
+ if (HD(j)->cp_stat[i] == FREE) {
+ HD(j)->last_cp_used = i;
+ break;
+ }
+ }
+
+ if (k == sh[j]->can_queue) {
+ printk("%s: qcomm, no free mailbox.\n", BN(j));
+ return 1;
+ }
+
+ /* Set pointer to control packet structure */
+ cpp = &HD(j)->cp[i];
+
+ memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
+ SCpnt->scsi_done = done;
+ cpp->cpp_index = i;
+ SCpnt->host_scribble = (unsigned char *) &cpp->cpp_index;
+
+ if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
+ BN(j), i, SCpnt->device->channel, SCpnt->device->id,
+ SCpnt->device->lun, SCpnt->pid);
+
+ cpp->opcode = OP_SCSI;
+ cpp->channel = SCpnt->device->channel;
+ cpp->target = SCpnt->device->id;
+ cpp->lun = SCpnt->device->lun;
+ cpp->SCpnt = SCpnt;
+ cpp->cdb_len = SCpnt->cmd_len;
+ memcpy(cpp->cdb, SCpnt->cmnd, SCpnt->cmd_len);
+
+ /* Use data transfer direction SCpnt->sc_data_direction */
+ scsi_to_dev_dir(i, j);
+
+ /* Map DMA buffers and SG list */
+ map_dma(i, j);
+
+ if (linked_comm && SCpnt->device->queue_depth > 2
+ && TLDEV(SCpnt->device->type)) {
+ HD(j)->cp_stat[i] = READY;
+ flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE);
+ return 0;
+ }
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ unmap_dma(i, j);
+ SCpnt->host_scribble = NULL;
+ printk("%s: qcomm, target %d.%d:%d, pid %ld, adapter busy.\n",
+ BN(j), SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid);
+ return 1;
+ }
+
+ /* Store pointer in OGM address bytes */
+ outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
+
+ /* Issue OGM interrupt */
+ outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+
+ HD(j)->cp_stat[i] = IN_USE;
+ return 0;
+}
+
+static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
+ unsigned int i, j;
+
+ j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
+
+ if (SCarg->host_scribble == NULL) {
+ printk("%s: abort, target %d.%d:%d, pid %ld inactive.\n",
+ BN(j), SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+ return SUCCESS;
+ }
+
+ i = *(unsigned int *)SCarg->host_scribble;
+ printk("%s: abort, mbox %d, target %d.%d:%d, pid %ld.\n",
+ BN(j), i, SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+
+ if (i >= sh[j]->can_queue)
+ panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ printk("%s: abort, timeout error.\n", BN(j));
+ return FAILED;
+ }
+
+ if (HD(j)->cp_stat[i] == FREE) {
+ printk("%s: abort, mbox %d is free.\n", BN(j), i);
+ return SUCCESS;
+ }
+
+ if (HD(j)->cp_stat[i] == IN_USE) {
+ printk("%s: abort, mbox %d is in use.\n", BN(j), i);
+
+ if (SCarg != HD(j)->cp[i].SCpnt)
+ panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
+ BN(j), i, SCarg, HD(j)->cp[i].SCpnt);
+
+ if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
+ printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
+
+ if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
+ unmap_dma(i, j);
+ SCarg->host_scribble = NULL;
+ HD(j)->cp_stat[i] = FREE;
+ printk("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
+ BN(j), i, SCarg->pid);
+ return SUCCESS;
+ }
+
+ return FAILED;
+ }
+
+ if (HD(j)->cp_stat[i] == IN_RESET) {
+ printk("%s: abort, mbox %d is in reset.\n", BN(j), i);
+ return FAILED;
+ }
+
+ if (HD(j)->cp_stat[i] == LOCKED) {
+ printk("%s: abort, mbox %d is locked.\n", BN(j), i);
+ return SUCCESS;
+ }
+
+ if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+ unmap_dma(i, j);
+ SCarg->result = DID_ABORT << 16;
+ SCarg->host_scribble = NULL;
+ HD(j)->cp_stat[i] = FREE;
+ printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
+ BN(j), i, SCarg->pid);
+ SCarg->scsi_done(SCarg);
+ return SUCCESS;
+ }
+
+ panic("%s: abort, mbox %d, invalid cp_stat.\n", BN(j), i);
+}
+
+static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
+ unsigned int i, j, time, k, c, limit = 0;
+ int arg_done = FALSE;
+ struct scsi_cmnd *SCpnt;
+
+ j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
+ printk("%s: reset, enter, target %d.%d:%d, pid %ld.\n",
+ BN(j), SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+
+ if (SCarg->host_scribble == NULL)
+ printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
+
+ if (HD(j)->in_reset) {
+ printk("%s: reset, exit, already in reset.\n", BN(j));
+ return FAILED;
+ }
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ printk("%s: reset, exit, timeout error.\n", BN(j));
+ return FAILED;
+ }
+
+ HD(j)->retries = 0;
+
+ for (c = 0; c <= sh[j]->max_channel; c++)
+ for (k = 0; k < sh[j]->max_id; k++) {
+ HD(j)->target_redo[k][c] = TRUE;
+ HD(j)->target_to[k][c] = 0;
+ }
+
+ for (i = 0; i < sh[j]->can_queue; i++) {
+
+ if (HD(j)->cp_stat[i] == FREE) continue;
+
+ if (HD(j)->cp_stat[i] == LOCKED) {
+ HD(j)->cp_stat[i] = FREE;
+ printk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
+ continue;
+ }
+
+ if (!(SCpnt = HD(j)->cp[i].SCpnt))
+ panic("%s: reset, mbox %d, SCpnt == NULL.\n", BN(j), i);
+
+ if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+ HD(j)->cp_stat[i] = ABORTING;
+ printk("%s: reset, mbox %d aborting, pid %ld.\n",
+ BN(j), i, SCpnt->pid);
+ }
+
+ else {
+ HD(j)->cp_stat[i] = IN_RESET;
+ printk("%s: reset, mbox %d in reset, pid %ld.\n",
+ BN(j), i, SCpnt->pid);
+ }
+
+ if (SCpnt->host_scribble == NULL)
+ panic("%s: reset, mbox %d, garbled SCpnt.\n", BN(j), i);
+
+ if (*(unsigned int *)SCpnt->host_scribble != i)
+ panic("%s: reset, mbox %d, index mismatch.\n", BN(j), i);
+
+ if (SCpnt->scsi_done == NULL)
+ panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n", BN(j), i);
+
+ if (SCpnt == SCarg) arg_done = TRUE;
+ }
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ printk("%s: reset, cannot reset, timeout error.\n", BN(j));
+ return FAILED;
+ }
+
+ outb(CMD_RESET, sh[j]->io_port + REG_LCL_INTR);
+ printk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
+
+#if defined(DEBUG_RESET)
+ do_trace = TRUE;
+#endif
+
+ HD(j)->in_reset = TRUE;
+
+ spin_unlock_irq(sh[j]->host_lock);
+ time = jiffies;
+ while ((jiffies - time) < (10 * HZ) && limit++ < 200000) udelay(100L);
+ spin_lock_irq(sh[j]->host_lock);
+
+ printk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
+
+ for (i = 0; i < sh[j]->can_queue; i++) {
+
+ if (HD(j)->cp_stat[i] == IN_RESET) {
+ SCpnt = HD(j)->cp[i].SCpnt;
+ unmap_dma(i, j);
+ SCpnt->result = DID_RESET << 16;
+ SCpnt->host_scribble = NULL;
+
+ /* This mailbox is still waiting for its interrupt */
+ HD(j)->cp_stat[i] = LOCKED;
+
+ printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
+ BN(j), i, SCpnt->pid);
+ }
+
+ else if (HD(j)->cp_stat[i] == ABORTING) {
+ SCpnt = HD(j)->cp[i].SCpnt;
+ unmap_dma(i, j);
+ SCpnt->result = DID_RESET << 16;
+ SCpnt->host_scribble = NULL;
+
+ /* This mailbox was never queued to the adapter */
+ HD(j)->cp_stat[i] = FREE;
+
+ printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
+ BN(j), i, SCpnt->pid);
+ }
+
+ else
+
+ /* Any other mailbox has already been set free by interrupt */
+ continue;
+
+ SCpnt->scsi_done(SCpnt);
+ }
+
+ HD(j)->in_reset = FALSE;
+ do_trace = FALSE;
+
+ if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->pid);
+ else printk("%s: reset, exit.\n", BN(j));
+
+ return SUCCESS;
+}
+
+static int u14_34f_bios_param(struct scsi_device *disk,
+ struct block_device *bdev, sector_t capacity, int *dkinfo) {
+ unsigned int j = 0;
+ unsigned int size = capacity;
+
+ dkinfo[0] = HD(j)->heads;
+ dkinfo[1] = HD(j)->sectors;
+ dkinfo[2] = size / (HD(j)->heads * HD(j)->sectors);
+
+ if (ext_tran && (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
+ dkinfo[0] = 255;
+ dkinfo[1] = 63;
+ dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
+ }
+
+#if defined (DEBUG_GEOMETRY)
+ printk ("%s: bios_param, head=%d, sec=%d, cyl=%d.\n", driver_name,
+ dkinfo[0], dkinfo[1], dkinfo[2]);
+#endif
+
+ return FALSE;
+}
+
+static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
+ unsigned int rev) {
+ unsigned int i, j, k, y;
+ unsigned long x;
+
+ for (i = 0; i < n - 1; i++) {
+ k = i;
+
+ for (j = k + 1; j < n; j++)
+ if (rev) {
+ if (sk[j] > sk[k]) k = j;
+ }
+ else {
+ if (sk[j] < sk[k]) k = j;
+ }
+
+ if (k != i) {
+ x = sk[k]; sk[k] = sk[i]; sk[i] = x;
+ y = da[k]; da[k] = da[i]; da[i] = y;
+ }
+ }
+
+ return;
+ }
+
+static int reorder(unsigned int j, unsigned long cursec,
+ unsigned int ihdlr, unsigned int il[], unsigned int n_ready) {
+ struct scsi_cmnd *SCpnt;
+ struct mscp *cpp;
+ unsigned int k, n;
+ unsigned int rev = FALSE, s = TRUE, r = TRUE;
+ unsigned int input_only = TRUE, overlap = FALSE;
+ unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
+ unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
+ unsigned long ioseek = 0;
+
+ static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
+ static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
+ static unsigned int readysorted = 0, revcount = 0;
+ static unsigned long seeksorted = 0, seeknosort = 0;
+
+ if (link_statistics && !(++flushcount % link_statistics))
+ printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"\
+ " av %ldK as %ldK.\n", flushcount, batchcount, inputcount,
+ ovlcount, readycount, readysorted, sortcount, revcount,
+ seeknosort / (readycount + 1),
+ seeksorted / (readycount + 1));
+
+ if (n_ready <= 1) return FALSE;
+
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+ if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
+
+ if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector;
+ if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector;
+
+ sl[n] = SCpnt->request->sector;
+ ioseek += SCpnt->request->nr_sectors;
+
+ if (!n) continue;
+
+ if (sl[n] < sl[n - 1]) s = FALSE;
+ if (sl[n] > sl[n - 1]) r = FALSE;
+
+ if (link_statistics) {
+ if (sl[n] > sl[n - 1])
+ seek += sl[n] - sl[n - 1];
+ else
+ seek += sl[n - 1] - sl[n];
+ }
+
+ }
+
+ if (link_statistics) {
+ if (cursec > sl[0]) seek += cursec - sl[0]; else seek += sl[0] - cursec;
+ }
+
+ if (cursec > ((maxsec + minsec) / 2)) rev = TRUE;
+
+ if (ioseek > ((maxsec - minsec) / 2)) rev = FALSE;
+
+ if (!((rev && r) || (!rev && s))) sort(sl, il, n_ready, rev);
+
+ if (!input_only) for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+ ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->pid;
+
+ if (!n) continue;
+
+ if ((sl[n] == sl[n - 1]) || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
+ || (rev && ((sl[n] + ll[n]) > sl[n - 1]))) overlap = TRUE;
+ }
+
+ if (overlap) sort(pl, il, n_ready, FALSE);
+
+ if (link_statistics) {
+ if (cursec > sl[0]) iseek = cursec - sl[0]; else iseek = sl[0] - cursec;
+ batchcount++; readycount += n_ready; seeknosort += seek / 1024;
+ if (input_only) inputcount++;
+ if (overlap) { ovlcount++; seeksorted += iseek / 1024; }
+ else seeksorted += (iseek + maxsec - minsec) / 1024;
+ if (rev && !r) { revcount++; readysorted += n_ready; }
+ if (!rev && !s) { sortcount++; readysorted += n_ready; }
+ }
+
+#if defined(DEBUG_LINKED_COMMANDS)
+ if (link_statistics && (overlap || !(flushcount % link_statistics)))
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+ printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+ " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
+ (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
+ SCpnt->lun, SCpnt->pid, k, flushcount, n_ready,
+ SCpnt->request->sector, SCpnt->request->nr_sectors, cursec,
+ YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+ YESNO(overlap), cpp->xdir);
+ }
+#endif
+ return overlap;
+}
+
+static void flush_dev(struct scsi_device *dev, unsigned long cursec, unsigned int j,
+ unsigned int ihdlr) {
+ struct scsi_cmnd *SCpnt;
+ struct mscp *cpp;
+ unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
+
+ for (k = 0; k < sh[j]->can_queue; k++) {
+
+ if (HD(j)->cp_stat[k] != READY && HD(j)->cp_stat[k] != IN_USE) continue;
+
+ cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+ if (SCpnt->device != dev) continue;
+
+ if (HD(j)->cp_stat[k] == IN_USE) return;
+
+ il[n_ready++] = k;
+ }
+
+ if (reorder(j, cursec, ihdlr, il, n_ready)) n_ready = 1;
+
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+ if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+ printk("%s: %s, target %d.%d:%d, pid %ld, mbox %d, adapter"\
+ " busy, will abort.\n", BN(j), (ihdlr ? "ihdlr" : "qcomm"),
+ SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid, k);
+ HD(j)->cp_stat[k] = ABORTING;
+ continue;
+ }
+
+ outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
+ outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+ HD(j)->cp_stat[k] = IN_USE;
+ }
+
+}
+
+static irqreturn_t ihdlr(int irq, unsigned int j) {
+ struct scsi_cmnd *SCpnt;
+ unsigned int i, k, c, status, tstatus, reg, ret;
+ struct mscp *spp, *cpp;
+
+ if (sh[j]->irq != irq)
+ panic("%s: ihdlr, irq %d, sh[j]->irq %d.\n", BN(j), irq, sh[j]->irq);
+
+ /* Check if this board need to be serviced */
+ if (!((reg = inb(sh[j]->io_port + REG_SYS_INTR)) & IRQ_ASSERTED)) goto none;
+
+ HD(j)->iocount++;
+
+ if (do_trace) printk("%s: ihdlr, enter, irq %d, count %d.\n", BN(j), irq,
+ HD(j)->iocount);
+
+ /* Check if this board is still busy */
+ if (wait_on_busy(sh[j]->io_port, 20 * MAXLOOP)) {
+ outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+ printk("%s: ihdlr, busy timeout error, irq %d, reg 0x%x, count %d.\n",
+ BN(j), irq, reg, HD(j)->iocount);
+ goto none;
+ }
+
+ ret = inl(sh[j]->io_port + REG_ICM);
+
+ /* Clear interrupt pending flag */
+ outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+
+ /* Find the mailbox to be serviced on this board */
+ for (i = 0; i < sh[j]->can_queue; i++)
+ if (H2DEV(HD(j)->cp[i].cp_dma_addr) == ret) break;
+
+ if (i >= sh[j]->can_queue)
+ panic("%s: ihdlr, invalid mscp bus address %p, cp0 %p.\n", BN(j),
+ (void *)ret, (void *)H2DEV(HD(j)->cp[0].cp_dma_addr));
+
+ cpp = &(HD(j)->cp[i]);
+ spp = cpp;
+
+#if defined(DEBUG_GENERATE_ABORTS)
+ if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 500) < 3)) goto handled;
+#endif
+
+ if (HD(j)->cp_stat[i] == IGNORE) {
+ HD(j)->cp_stat[i] = FREE;
+ goto handled;
+ }
+ else if (HD(j)->cp_stat[i] == LOCKED) {
+ HD(j)->cp_stat[i] = FREE;
+ printk("%s: ihdlr, mbox %d unlocked, count %d.\n", BN(j), i,
+ HD(j)->iocount);
+ goto handled;
+ }
+ else if (HD(j)->cp_stat[i] == FREE) {
+ printk("%s: ihdlr, mbox %d is free, count %d.\n", BN(j), i,
+ HD(j)->iocount);
+ goto handled;
+ }
+ else if (HD(j)->cp_stat[i] == IN_RESET)
+ printk("%s: ihdlr, mbox %d is in reset.\n", BN(j), i);
+ else if (HD(j)->cp_stat[i] != IN_USE)
+ panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
+ BN(j), i, HD(j)->cp_stat[i]);
+
+ HD(j)->cp_stat[i] = FREE;
+ SCpnt = cpp->SCpnt;
+
+ if (SCpnt == NULL) panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", BN(j), i);
+
+ if (SCpnt->host_scribble == NULL)
+ panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
+ SCpnt->pid, SCpnt);
+
+ if (*(unsigned int *)SCpnt->host_scribble != i)
+ panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
+ BN(j), i, SCpnt->pid, *(unsigned int *)SCpnt->host_scribble);
+
+ sync_dma(i, j);
+
+ if (linked_comm && SCpnt->device->queue_depth > 2
+ && TLDEV(SCpnt->device->type))
+ flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE);
+
+ tstatus = status_byte(spp->target_status);
+
+#if defined(DEBUG_GENERATE_ERRORS)
+ if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 200) < 2))
+ spp->adapter_status = 0x01;
+#endif
+
+ switch (spp->adapter_status) {
+ case ASOK: /* status OK */
+
+ /* Forces a reset if a disk drive keeps returning BUSY */
+ if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
+ status = DID_ERROR << 16;
+
+ /* If there was a bus reset, redo operation on each target */
+ else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
+ && HD(j)->target_redo[SCpnt->device->id][SCpnt->device->channel])
+ status = DID_BUS_BUSY << 16;
+
+ /* Works around a flaw in scsi.c */
+ else if (tstatus == CHECK_CONDITION
+ && SCpnt->device->type == TYPE_DISK
+ && (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
+ status = DID_BUS_BUSY << 16;
+
+ else
+ status = DID_OK << 16;
+
+ if (tstatus == GOOD)
+ HD(j)->target_redo[SCpnt->device->id][SCpnt->device->channel] = FALSE;
+
+ if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
+ (!(tstatus == CHECK_CONDITION && HD(j)->iocount <= 1000 &&
+ (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
+ printk("%s: ihdlr, target %d.%d:%d, pid %ld, "\
+ "target_status 0x%x, sense key 0x%x.\n", BN(j),
+ SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun,
+ SCpnt->pid, spp->target_status,
+ SCpnt->sense_buffer[2]);
+
+ HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
+
+ if (HD(j)->last_retried_pid == SCpnt->pid) HD(j)->retries = 0;
+
+ break;
+ case ASST: /* Selection Time Out */
+
+ if (HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel] > 1)
+ status = DID_ERROR << 16;
+ else {
+ status = DID_TIME_OUT << 16;
+ HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel]++;
+ }
+
+ break;
+
+ /* Perform a limited number of internal retries */
+ case 0x93: /* Unexpected bus free */
+ case 0x94: /* Target bus phase sequence failure */
+ case 0x96: /* Illegal SCSI command */
+ case 0xa3: /* SCSI bus reset error */
+
+ for (c = 0; c <= sh[j]->max_channel; c++)
+ for (k = 0; k < sh[j]->max_id; k++)
+ HD(j)->target_redo[k][c] = TRUE;
+
+
+ case 0x92: /* Data over/under-run */
+
+ if (SCpnt->device->type != TYPE_TAPE
+ && HD(j)->retries < MAX_INTERNAL_RETRIES) {
+
+#if defined(DID_SOFT_ERROR)
+ status = DID_SOFT_ERROR << 16;
+#else
+ status = DID_BUS_BUSY << 16;
+#endif
+
+ HD(j)->retries++;
+ HD(j)->last_retried_pid = SCpnt->pid;
+ }
+ else
+ status = DID_ERROR << 16;
+
+ break;
+ case 0x01: /* Invalid command */
+ case 0x02: /* Invalid parameters */
+ case 0x03: /* Invalid data list */
+ case 0x84: /* SCSI bus abort error */
+ case 0x9b: /* Auto request sense error */
+ case 0x9f: /* Unexpected command complete message error */
+ case 0xff: /* Invalid parameter in the S/G list */
+ default:
+ status = DID_ERROR << 16;
+ break;
+ }
+
+ SCpnt->result = status | spp->target_status;
+
+#if defined(DEBUG_INTERRUPT)
+ if (SCpnt->result || do_trace)
+#else
+ if ((spp->adapter_status != ASOK && HD(j)->iocount > 1000) ||
+ (spp->adapter_status != ASOK &&
+ spp->adapter_status != ASST && HD(j)->iocount <= 1000) ||
+ do_trace || msg_byte(spp->target_status))
+#endif
+ printk("%s: ihdlr, mbox %2d, err 0x%x:%x,"\
+ " target %d.%d:%d, pid %ld, reg 0x%x, count %d.\n",
+ BN(j), i, spp->adapter_status, spp->target_status,
+ SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid,
+ reg, HD(j)->iocount);
+
+ unmap_dma(i, j);
+
+ /* Set the command state to inactive */
+ SCpnt->host_scribble = NULL;
+
+ SCpnt->scsi_done(SCpnt);
+
+ if (do_trace) printk("%s: ihdlr, exit, irq %d, count %d.\n", BN(j), irq,
+ HD(j)->iocount);
+
+handled:
+ return IRQ_HANDLED;
+none:
+ return IRQ_NONE;
+}
+
+static irqreturn_t do_interrupt_handler(int irq, void *shap,
+ struct pt_regs *regs) {
+ unsigned int j;
+ unsigned long spin_flags;
+ irqreturn_t ret;
+
+ /* Check if the interrupt must be processed by this handler */
+ if ((j = (unsigned int)((char *)shap - sha)) >= num_boards) return IRQ_NONE;
+
+ spin_lock_irqsave(sh[j]->host_lock, spin_flags);
+ ret = ihdlr(irq, j);
+ spin_unlock_irqrestore(sh[j]->host_lock, spin_flags);
+ return ret;
+}
+
+static int u14_34f_release(struct Scsi_Host *shpnt) {
+ unsigned int i, j;
+
+ for (j = 0; sh[j] != NULL && sh[j] != shpnt; j++);
+
+ if (sh[j] == NULL) panic("%s: release, invalid Scsi_Host pointer.\n",
+ driver_name);
+
+ for (i = 0; i < sh[j]->can_queue; i++)
+ if ((&HD(j)->cp[i])->sglist) kfree((&HD(j)->cp[i])->sglist);
+
+ for (i = 0; i < sh[j]->can_queue; i++)
+ pci_unmap_single(HD(j)->pdev, HD(j)->cp[i].cp_dma_addr,
+ sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
+
+ free_irq(sh[j]->irq, &sha[j]);
+
+ if (sh[j]->dma_channel != NO_DMA) free_dma(sh[j]->dma_channel);
+
+ release_region(sh[j]->io_port, sh[j]->n_io_port);
+ scsi_unregister(sh[j]);
+ return FALSE;
+}
+
+#include "scsi_module.c"
+
+#ifndef MODULE
+__setup("u14-34f=", option_setup);
+#endif /* end MODULE */