Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
new file mode 100644
index 0000000..5b8e867
--- /dev/null
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -0,0 +1,123 @@
+/* Driver for SCM Microsystems USB-ATAPI cable
+ * Header File
+ *
+ * $Id: shuttle_usbat.h,v 1.5 2000/09/17 14:44:52 groovyjava Exp $
+ *
+ * Current development and maintenance by:
+ * (c) 2000 Robert Baruch (autophile@dol.net)
+ * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * See shuttle_usbat.c for more explanation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_SHUTTLE_USBAT_H
+#define _USB_SHUTTLE_USBAT_H
+
+/* Supported device types */
+#define USBAT_DEV_HP8200 0x01
+#define USBAT_DEV_FLASH 0x02
+
+#define USBAT_EPP_PORT 0x10
+#define USBAT_EPP_REGISTER 0x30
+#define USBAT_ATA 0x40
+#define USBAT_ISA 0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG 0x00
+#define USBAT_CMD_WRITE_REG 0x01
+#define USBAT_CMD_READ_BLOCK 0x02
+#define USBAT_CMD_WRITE_BLOCK 0x03
+#define USBAT_CMD_COND_READ_BLOCK 0x04
+#define USBAT_CMD_COND_WRITE_BLOCK 0x05
+#define USBAT_CMD_WRITE_REGS 0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD 0x80
+#define USBAT_CMD_SET_FEAT 0x81
+#define USBAT_CMD_UIO 0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ 1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ 0x20 // full compare
+#define USBAT_QUAL_ALQ 0x10 // auto load subcount
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE 0
+#define USBAT_FLASH_MEDIA_CF 1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME 0
+#define USBAT_FLASH_MEDIA_CHANGED 1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA 0x10 // read/write data (R/W)
+#define USBAT_ATA_FEATURES 0x11 // set features (W)
+#define USBAT_ATA_ERROR 0x11 // error (R)
+#define USBAT_ATA_SECCNT 0x12 // sector count (R/W)
+#define USBAT_ATA_SECNUM 0x13 // sector number (R/W)
+#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W)
+#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W)
+#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W)
+#define USBAT_ATA_STATUS 0x17 // device status (R)
+#define USBAT_ATA_CMD 0x17 // device command (W)
+#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R)
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals
+#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only)
+ // CDT = ACKD & !UI1 & !UI0
+#define USBAT_UIO_1 0x20 // I/O 1
+#define USBAT_UIO_0 0x10 // I/O 0
+#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode
+#define USBAT_UIO_UI1 0x04 // Input 1
+#define USBAT_UIO_UI0 0x02 // Input 0
+#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral
+#define USBAT_UIO_ACKD 0x40 // Enable Card Detect
+#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input
+ // If ACKD=1, set OE1 to 1 also.
+#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input
+#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80 // External trigger enable
+#define USBAT_FEAT_U1 0x08
+#define USBAT_FEAT_U0 0x04
+#define USBAT_FEAT_ET1 0x02
+#define USBAT_FEAT_ET2 0x01
+
+extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
+extern int init_usbat(struct us_data *us);
+
+struct usbat_info {
+ int devicetype;
+
+ /* Used for Flash readers only */
+ unsigned long sectors; // total sector count
+ unsigned long ssize; // sector size in bytes
+
+ unsigned char sense_key;
+ unsigned long sense_asc; // additional sense code
+ unsigned long sense_ascq; // additional sense code qualifier
+};
+
+#endif