Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
new file mode 100644
index 0000000..c08ce97
--- /dev/null
+++ b/include/asm-alpha/system.h
@@ -0,0 +1,626 @@
+#ifndef __ALPHA_SYSTEM_H
+#define __ALPHA_SYSTEM_H
+
+#include <linux/config.h>
+#include <asm/pal.h>
+#include <asm/page.h>
+
+/*
+ * System defines.. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.
+ */
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB 0x20000000
+#define BOOT_ADDR 0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE (16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS 0x300000 /* Old bootloaders hardcoded this. */
+#else
+#define KERNEL_START_PHYS 0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START (PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD KERNEL_START
+#define INIT_STACK (PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT (PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR (PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader. Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM ZERO_PGE
+#define COMMAND_LINE ((char*)(PARAM + 0x0000))
+#define INITRD_START (*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x108))
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
+/*
+ * This is the logout header that should be common to all platforms
+ * (assuming they are running OSF/1 PALcode, I guess).
+ */
+struct el_common {
+ unsigned int size; /* size in bytes of logout area */
+ unsigned int sbz1 : 30; /* should be zero */
+ unsigned int err2 : 1; /* second error */
+ unsigned int retry : 1; /* retry flag */
+ unsigned int proc_offset; /* processor-specific offset */
+ unsigned int sys_offset; /* system-specific offset */
+ unsigned int code; /* machine check code */
+ unsigned int frame_rev; /* frame revision */
+};
+
+/* Machine Check Frame for uncorrectable errors (Large format)
+ * --- This is used to log uncorrectable errors such as
+ * double bit ECC errors.
+ * --- These errors are detected by both processor and systems.
+ */
+struct el_common_EV5_uncorrectable_mcheck {
+ unsigned long shadow[8]; /* Shadow reg. 8-14, 25 */
+ unsigned long paltemp[24]; /* PAL TEMP REGS. */
+ unsigned long exc_addr; /* Address of excepting instruction*/
+ unsigned long exc_sum; /* Summary of arithmetic traps. */
+ unsigned long exc_mask; /* Exception mask (from exc_sum). */
+ unsigned long pal_base; /* Base address for PALcode. */
+ unsigned long isr; /* Interrupt Status Reg. */
+ unsigned long icsr; /* CURRENT SETUP OF EV5 IBOX */
+ unsigned long ic_perr_stat; /* I-CACHE Reg. <11> set Data parity
+ <12> set TAG parity*/
+ unsigned long dc_perr_stat; /* D-CACHE error Reg. Bits set to 1:
+ <2> Data error in bank 0
+ <3> Data error in bank 1
+ <4> Tag error in bank 0
+ <5> Tag error in bank 1 */
+ unsigned long va; /* Effective VA of fault or miss. */
+ unsigned long mm_stat; /* Holds the reason for D-stream
+ fault or D-cache parity errors */
+ unsigned long sc_addr; /* Address that was being accessed
+ when EV5 detected Secondary cache
+ failure. */
+ unsigned long sc_stat; /* Helps determine if the error was
+ TAG/Data parity(Secondary Cache)*/
+ unsigned long bc_tag_addr; /* Contents of EV5 BC_TAG_ADDR */
+ unsigned long ei_addr; /* Physical address of any transfer
+ that is logged in EV5 EI_STAT */
+ unsigned long fill_syndrome; /* For correcting ECC errors. */
+ unsigned long ei_stat; /* Helps identify reason of any
+ processor uncorrectable error
+ at its external interface. */
+ unsigned long ld_lock; /* Contents of EV5 LD_LOCK register*/
+};
+
+struct el_common_EV6_mcheck {
+ unsigned int FrameSize; /* Bytes, including this field */
+ unsigned int FrameFlags; /* <31> = Retry, <30> = Second Error */
+ unsigned int CpuOffset; /* Offset to CPU-specific info */
+ unsigned int SystemOffset; /* Offset to system-specific info */
+ unsigned int MCHK_Code;
+ unsigned int MCHK_Frame_Rev;
+ unsigned long I_STAT; /* EV6 Internal Processor Registers */
+ unsigned long DC_STAT; /* (See the 21264 Spec) */
+ unsigned long C_ADDR;
+ unsigned long DC1_SYNDROME;
+ unsigned long DC0_SYNDROME;
+ unsigned long C_STAT;
+ unsigned long C_STS;
+ unsigned long MM_STAT;
+ unsigned long EXC_ADDR;
+ unsigned long IER_CM;
+ unsigned long ISUM;
+ unsigned long RESERVED0;
+ unsigned long PAL_BASE;
+ unsigned long I_CTL;
+ unsigned long PCTX;
+};
+
+extern void halt(void) __attribute__((noreturn));
+#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
+
+#define switch_to(P,N,L) \
+ do { \
+ (L) = alpha_switch_to(virt_to_phys(&(N)->thread_info->pcb), (P)); \
+ check_mmu_context(); \
+ } while (0)
+
+struct task_struct;
+extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
+
+#define mb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define rmb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define wmb() \
+__asm__ __volatile__("wmb": : :"memory")
+
+#define read_barrier_depends() \
+__asm__ __volatile__("mb": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() barrier()
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#define set_wmb(var, value) \
+do { var = value; wmb(); } while (0)
+
+#define imb() \
+__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
+
+#define draina() \
+__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
+
+enum implver_enum {
+ IMPLVER_EV4,
+ IMPLVER_EV5,
+ IMPLVER_EV6
+};
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define implver() \
+({ unsigned long __implver; \
+ __asm__ ("implver %0" : "=r"(__implver)); \
+ (enum implver_enum) __implver; })
+#else
+/* Try to eliminate some dead code. */
+#ifdef CONFIG_ALPHA_EV4
+#define implver() IMPLVER_EV4
+#endif
+#ifdef CONFIG_ALPHA_EV5
+#define implver() IMPLVER_EV5
+#endif
+#if defined(CONFIG_ALPHA_EV6)
+#define implver() IMPLVER_EV6
+#endif
+#endif
+
+enum amask_enum {
+ AMASK_BWX = (1UL << 0),
+ AMASK_FIX = (1UL << 1),
+ AMASK_CIX = (1UL << 2),
+ AMASK_MAX = (1UL << 8),
+ AMASK_PRECISE_TRAP = (1UL << 9),
+};
+
+#define amask(mask) \
+({ unsigned long __amask, __input = (mask); \
+ __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input)); \
+ __amask; })
+
+#define __CALL_PAL_R0(NAME, TYPE) \
+static inline TYPE NAME(void) \
+{ \
+ register TYPE __r0 __asm__("$0"); \
+ __asm__ __volatile__( \
+ "call_pal %1 # " #NAME \
+ :"=r" (__r0) \
+ :"i" (PAL_ ## NAME) \
+ :"$1", "$16", "$22", "$23", "$24", "$25"); \
+ return __r0; \
+}
+
+#define __CALL_PAL_W1(NAME, TYPE0) \
+static inline void NAME(TYPE0 arg0) \
+{ \
+ register TYPE0 __r16 __asm__("$16") = arg0; \
+ __asm__ __volatile__( \
+ "call_pal %1 # "#NAME \
+ : "=r"(__r16) \
+ : "i"(PAL_ ## NAME), "0"(__r16) \
+ : "$1", "$22", "$23", "$24", "$25"); \
+}
+
+#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
+static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
+{ \
+ register TYPE0 __r16 __asm__("$16") = arg0; \
+ register TYPE1 __r17 __asm__("$17") = arg1; \
+ __asm__ __volatile__( \
+ "call_pal %2 # "#NAME \
+ : "=r"(__r16), "=r"(__r17) \
+ : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
+ : "$1", "$22", "$23", "$24", "$25"); \
+}
+
+#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
+static inline RTYPE NAME(TYPE0 arg0) \
+{ \
+ register RTYPE __r0 __asm__("$0"); \
+ register TYPE0 __r16 __asm__("$16") = arg0; \
+ __asm__ __volatile__( \
+ "call_pal %2 # "#NAME \
+ : "=r"(__r16), "=r"(__r0) \
+ : "i"(PAL_ ## NAME), "0"(__r16) \
+ : "$1", "$22", "$23", "$24", "$25"); \
+ return __r0; \
+}
+
+#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
+static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
+{ \
+ register RTYPE __r0 __asm__("$0"); \
+ register TYPE0 __r16 __asm__("$16") = arg0; \
+ register TYPE1 __r17 __asm__("$17") = arg1; \
+ __asm__ __volatile__( \
+ "call_pal %3 # "#NAME \
+ : "=r"(__r16), "=r"(__r17), "=r"(__r0) \
+ : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
+ : "$1", "$22", "$23", "$24", "$25"); \
+ return __r0; \
+}
+
+__CALL_PAL_W1(cflush, unsigned long);
+__CALL_PAL_R0(rdmces, unsigned long);
+__CALL_PAL_R0(rdps, unsigned long);
+__CALL_PAL_R0(rdusp, unsigned long);
+__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
+__CALL_PAL_R0(whami, unsigned long);
+__CALL_PAL_W2(wrent, void*, unsigned long);
+__CALL_PAL_W1(wripir, unsigned long);
+__CALL_PAL_W1(wrkgp, unsigned long);
+__CALL_PAL_W1(wrmces, unsigned long);
+__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
+__CALL_PAL_W1(wrusp, unsigned long);
+__CALL_PAL_W1(wrvptptr, unsigned long);
+
+#define IPL_MIN 0
+#define IPL_SW0 1
+#define IPL_SW1 2
+#define IPL_DEV0 3
+#define IPL_DEV1 4
+#define IPL_TIMER 5
+#define IPL_PERF 6
+#define IPL_POWERFAIL 6
+#define IPL_MCHECK 7
+#define IPL_MAX 7
+
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+#undef IPL_MIN
+#define IPL_MIN __min_ipl
+extern int __min_ipl;
+#endif
+
+#define getipl() (rdps() & 7)
+#define setipl(ipl) ((void) swpipl(ipl))
+
+#define local_irq_disable() do { setipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_enable() do { barrier(); setipl(IPL_MIN); } while(0)
+#define local_save_flags(flags) ((flags) = rdps())
+#define local_irq_save(flags) do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_restore(flags) do { barrier(); setipl(flags); barrier(); } while(0)
+
+#define irqs_disabled() (getipl() == IPL_MAX)
+
+/*
+ * TB routines..
+ */
+#define __tbi(nr,arg,arg1...) \
+({ \
+ register unsigned long __r16 __asm__("$16") = (nr); \
+ register unsigned long __r17 __asm__("$17"); arg; \
+ __asm__ __volatile__( \
+ "call_pal %3 #__tbi" \
+ :"=r" (__r16),"=r" (__r17) \
+ :"0" (__r16),"i" (PAL_tbi) ,##arg1 \
+ :"$0", "$1", "$22", "$23", "$24", "$25"); \
+})
+
+#define tbi(x,y) __tbi(x,__r17=(y),"1" (__r17))
+#define tbisi(x) __tbi(1,__r17=(x),"1" (__r17))
+#define tbisd(x) __tbi(2,__r17=(x),"1" (__r17))
+#define tbis(x) __tbi(3,__r17=(x),"1" (__r17))
+#define tbiap() __tbi(-1, /* no second argument */)
+#define tbia() __tbi(-2, /* no second argument */)
+
+/*
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
+ */
+
+static inline unsigned long
+__xchg_u8(volatile char *m, unsigned long val)
+{
+ unsigned long ret, tmp, addr64;
+
+ __asm__ __volatile__(
+ " andnot %4,7,%3\n"
+ " insbl %1,%4,%1\n"
+ "1: ldq_l %2,0(%3)\n"
+ " extbl %2,%4,%0\n"
+ " mskbl %2,%4,%2\n"
+ " or %1,%2,%2\n"
+ " stq_c %2,0(%3)\n"
+ " beq %2,2f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ ".subsection 2\n"
+ "2: br 1b\n"
+ ".previous"
+ : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+ : "r" ((long)m), "1" (val) : "memory");
+
+ return ret;
+}
+
+static inline unsigned long
+__xchg_u16(volatile short *m, unsigned long val)
+{
+ unsigned long ret, tmp, addr64;
+
+ __asm__ __volatile__(
+ " andnot %4,7,%3\n"
+ " inswl %1,%4,%1\n"
+ "1: ldq_l %2,0(%3)\n"
+ " extwl %2,%4,%0\n"
+ " mskwl %2,%4,%2\n"
+ " or %1,%2,%2\n"
+ " stq_c %2,0(%3)\n"
+ " beq %2,2f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ ".subsection 2\n"
+ "2: br 1b\n"
+ ".previous"
+ : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+ : "r" ((long)m), "1" (val) : "memory");
+
+ return ret;
+}
+
+static inline unsigned long
+__xchg_u32(volatile int *m, unsigned long val)
+{
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ "1: ldl_l %0,%4\n"
+ " bis $31,%3,%1\n"
+ " stl_c %1,%2\n"
+ " beq %1,2f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ ".subsection 2\n"
+ "2: br 1b\n"
+ ".previous"
+ : "=&r" (val), "=&r" (dummy), "=m" (*m)
+ : "rI" (val), "m" (*m) : "memory");
+
+ return val;
+}
+
+static inline unsigned long
+__xchg_u64(volatile long *m, unsigned long val)
+{
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ "1: ldq_l %0,%4\n"
+ " bis $31,%3,%1\n"
+ " stq_c %1,%2\n"
+ " beq %1,2f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ ".subsection 2\n"
+ "2: br 1b\n"
+ ".previous"
+ : "=&r" (val), "=&r" (dummy), "=m" (*m)
+ : "rI" (val), "m" (*m) : "memory");
+
+ return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid xchg(). */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, int size)
+{
+ switch (size) {
+ case 1:
+ return __xchg_u8(ptr, x);
+ case 2:
+ return __xchg_u16(ptr, x);
+ case 4:
+ return __xchg_u32(ptr, x);
+ case 8:
+ return __xchg_u64(ptr, x);
+ }
+ __xchg_called_with_bad_pointer();
+ return x;
+}
+
+#define xchg(ptr,x) \
+ ({ \
+ __typeof__(*(ptr)) _x_ = (x); \
+ (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+ })
+
+#define tas(ptr) (xchg((ptr),1))
+
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ *
+ * The memory barrier should be placed in SMP only when we actually
+ * make the change. If we don't change anything (so if the returned
+ * prev is equal to old) then we aren't acquiring anything new and
+ * we don't need any memory barrier as far I can tell.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u8(volatile char *m, long old, long new)
+{
+ unsigned long prev, tmp, cmp, addr64;
+
+ __asm__ __volatile__(
+ " andnot %5,7,%4\n"
+ " insbl %1,%5,%1\n"
+ "1: ldq_l %2,0(%4)\n"
+ " extbl %2,%5,%0\n"
+ " cmpeq %0,%6,%3\n"
+ " beq %3,2f\n"
+ " mskbl %2,%5,%2\n"
+ " or %1,%2,%2\n"
+ " stq_c %2,0(%4)\n"
+ " beq %2,3f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+ : "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+ return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u16(volatile short *m, long old, long new)
+{
+ unsigned long prev, tmp, cmp, addr64;
+
+ __asm__ __volatile__(
+ " andnot %5,7,%4\n"
+ " inswl %1,%5,%1\n"
+ "1: ldq_l %2,0(%4)\n"
+ " extwl %2,%5,%0\n"
+ " cmpeq %0,%6,%3\n"
+ " beq %3,2f\n"
+ " mskwl %2,%5,%2\n"
+ " or %1,%2,%2\n"
+ " stq_c %2,0(%4)\n"
+ " beq %2,3f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+ : "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+ return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+ unsigned long prev, cmp;
+
+ __asm__ __volatile__(
+ "1: ldl_l %0,%5\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,2f\n"
+ " mov %4,%1\n"
+ " stl_c %1,%2\n"
+ " beq %1,3f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : "=&r"(prev), "=&r"(cmp), "=m"(*m)
+ : "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+ return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+ unsigned long prev, cmp;
+
+ __asm__ __volatile__(
+ "1: ldq_l %0,%5\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,2f\n"
+ " mov %4,%1\n"
+ " stq_c %1,%2\n"
+ " beq %1,3f\n"
+#ifdef CONFIG_SMP
+ " mb\n"
+#endif
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : "=&r"(prev), "=&r"(cmp), "=m"(*m)
+ : "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+ return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+ switch (size) {
+ case 1:
+ return __cmpxchg_u8(ptr, old, new);
+ case 2:
+ return __cmpxchg_u16(ptr, old, new);
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif