Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/sound/oss/i810_audio.c b/sound/oss/i810_audio.c
new file mode 100644
index 0000000..7e9f667
--- /dev/null
+++ b/sound/oss/i810_audio.c
@@ -0,0 +1,3658 @@
+/*
+ * Intel i810 and friends ICH driver for Linux
+ * Alan Cox <alan@redhat.com>
+ *
+ * Built from:
+ * Low level code: Zach Brown (original nonworking i810 OSS driver)
+ * Jaroslav Kysela <perex@suse.cz> (working ALSA driver)
+ *
+ * Framework: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ * Extended by: Zach Brown <zab@redhat.com>
+ * and others..
+ *
+ * Hardware Provided By:
+ * Analog Devices (A major AC97 codec maker)
+ * Intel Corp (you've probably heard of them already)
+ *
+ * AC97 clues and assistance provided by
+ * Analog Devices
+ * Zach 'Fufu' Brown
+ * Jeff Garzik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Intel 810 theory of operation
+ *
+ * The chipset provides three DMA channels that talk to an AC97
+ * CODEC (AC97 is a digital/analog mixer standard). At its simplest
+ * you get 48Khz audio with basic volume and mixer controls. At the
+ * best you get rate adaption in the codec. We set the card up so
+ * that we never take completion interrupts but instead keep the card
+ * chasing its tail around a ring buffer. This is needed for mmap
+ * mode audio and happens to work rather well for non-mmap modes too.
+ *
+ * The board has one output channel for PCM audio (supported) and
+ * a stereo line in and mono microphone input. Again these are normally
+ * locked to 48Khz only. Right now recording is not finished.
+ *
+ * There is no midi support, no synth support. Use timidity. To get
+ * esd working you need to use esd -r 48000 as it won't probe 48KHz
+ * by default. mpg123 can't handle 48Khz only audio so use xmms.
+ *
+ * Fix The Sound On Dell
+ *
+ * Not everyone uses 48KHz. We know of no way to detect this reliably
+ * and certainly not to get the right data. If your i810 audio sounds
+ * stupid you may need to investigate other speeds. According to Analog
+ * they tend to use a 14.318MHz clock which gives you a base rate of
+ * 41194Hz.
+ *
+ * This is available via the 'ftsodell=1' option.
+ *
+ * If you need to force a specific rate set the clocking= option
+ *
+ * This driver is cursed. (Ben LaHaise)
+ *
+ * ICH 3 caveats
+ * Intel errata #7 for ICH3 IO. We need to disable SMI stuff
+ * when codec probing. [Not Yet Done]
+ *
+ * ICH 4 caveats
+ *
+ * The ICH4 has the feature, that the codec ID doesn't have to be
+ * congruent with the IO connection.
+ *
+ * Therefore, from driver version 0.23 on, there is a "codec ID" <->
+ * "IO register base offset" mapping (card->ac97_id_map) field.
+ *
+ * Juergen "George" Sawinski (jsaw)
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/sound.h>
+#include <linux/slab.h>
+#include <linux/soundcard.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/ac97_codec.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+
+#define DRIVER_VERSION "1.01"
+
+#define MODULOP2(a, b) ((a) & ((b) - 1))
+#define MASKP2(a, b) ((a) & ~((b) - 1))
+
+static int ftsodell;
+static int strict_clocking;
+static unsigned int clocking;
+static int spdif_locked;
+static int ac97_quirk = AC97_TUNE_DEFAULT;
+
+//#define DEBUG
+//#define DEBUG2
+//#define DEBUG_INTERRUPTS
+//#define DEBUG_MMAP
+//#define DEBUG_MMIO
+
+#define ADC_RUNNING 1
+#define DAC_RUNNING 2
+
+#define I810_FMT_16BIT 1
+#define I810_FMT_STEREO 2
+#define I810_FMT_MASK 3
+
+#define SPDIF_ON 0x0004
+#define SURR_ON 0x0010
+#define CENTER_LFE_ON 0x0020
+#define VOL_MUTED 0x8000
+
+/* the 810's array of pointers to data buffers */
+
+struct sg_item {
+#define BUSADDR_MASK 0xFFFFFFFE
+ u32 busaddr;
+#define CON_IOC 0x80000000 /* interrupt on completion */
+#define CON_BUFPAD 0x40000000 /* pad underrun with last sample, else 0 */
+#define CON_BUFLEN_MASK 0x0000ffff /* buffer length in samples */
+ u32 control;
+};
+
+/* an instance of the i810 channel */
+#define SG_LEN 32
+struct i810_channel
+{
+ /* these sg guys should probably be allocated
+ separately as nocache. Must be 8 byte aligned */
+ struct sg_item sg[SG_LEN]; /* 32*8 */
+ u32 offset; /* 4 */
+ u32 port; /* 4 */
+ u32 used;
+ u32 num;
+};
+
+/*
+ * we have 3 separate dma engines. pcm in, pcm out, and mic.
+ * each dma engine has controlling registers. These goofy
+ * names are from the datasheet, but make it easy to write
+ * code while leafing through it.
+ *
+ * ICH4 has 6 dma engines, pcm in, pcm out, mic, pcm in 2,
+ * mic in 2, s/pdif. Of special interest is the fact that
+ * the upper 3 DMA engines on the ICH4 *must* be accessed
+ * via mmio access instead of pio access.
+ */
+
+#define ENUM_ENGINE(PRE,DIG) \
+enum { \
+ PRE##_BASE = 0x##DIG##0, /* Base Address */ \
+ PRE##_BDBAR = 0x##DIG##0, /* Buffer Descriptor list Base Address */ \
+ PRE##_CIV = 0x##DIG##4, /* Current Index Value */ \
+ PRE##_LVI = 0x##DIG##5, /* Last Valid Index */ \
+ PRE##_SR = 0x##DIG##6, /* Status Register */ \
+ PRE##_PICB = 0x##DIG##8, /* Position In Current Buffer */ \
+ PRE##_PIV = 0x##DIG##a, /* Prefetched Index Value */ \
+ PRE##_CR = 0x##DIG##b /* Control Register */ \
+}
+
+ENUM_ENGINE(OFF,0); /* Offsets */
+ENUM_ENGINE(PI,0); /* PCM In */
+ENUM_ENGINE(PO,1); /* PCM Out */
+ENUM_ENGINE(MC,2); /* Mic In */
+
+enum {
+ GLOB_CNT = 0x2c, /* Global Control */
+ GLOB_STA = 0x30, /* Global Status */
+ CAS = 0x34 /* Codec Write Semaphore Register */
+};
+
+ENUM_ENGINE(MC2,4); /* Mic In 2 */
+ENUM_ENGINE(PI2,5); /* PCM In 2 */
+ENUM_ENGINE(SP,6); /* S/PDIF */
+
+enum {
+ SDM = 0x80 /* SDATA_IN Map Register */
+};
+
+/* interrupts for a dma engine */
+#define DMA_INT_FIFO (1<<4) /* fifo under/over flow */
+#define DMA_INT_COMPLETE (1<<3) /* buffer read/write complete and ioc set */
+#define DMA_INT_LVI (1<<2) /* last valid done */
+#define DMA_INT_CELV (1<<1) /* last valid is current */
+#define DMA_INT_DCH (1) /* DMA Controller Halted (happens on LVI interrupts) */
+#define DMA_INT_MASK (DMA_INT_FIFO|DMA_INT_COMPLETE|DMA_INT_LVI)
+
+/* interrupts for the whole chip */
+#define INT_SEC (1<<11)
+#define INT_PRI (1<<10)
+#define INT_MC (1<<7)
+#define INT_PO (1<<6)
+#define INT_PI (1<<5)
+#define INT_MO (1<<2)
+#define INT_NI (1<<1)
+#define INT_GPI (1<<0)
+#define INT_MASK (INT_SEC|INT_PRI|INT_MC|INT_PO|INT_PI|INT_MO|INT_NI|INT_GPI)
+
+/* magic numbers to protect our data structures */
+#define I810_CARD_MAGIC 0x5072696E /* "Prin" */
+#define I810_STATE_MAGIC 0x63657373 /* "cess" */
+#define I810_DMA_MASK 0xffffffff /* DMA buffer mask for pci_alloc_consist */
+#define NR_HW_CH 3
+
+/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
+#define NR_AC97 4
+
+/* Please note that an 8bit mono stream is not valid on this card, you must have a 16bit */
+/* stream at a minimum for this card to be happy */
+static const unsigned sample_size[] = { 1, 2, 2, 4 };
+/* Samples are 16bit values, so we are shifting to a word, not to a byte, hence shift */
+/* values are one less than might be expected */
+static const unsigned sample_shift[] = { -1, 0, 0, 1 };
+
+enum {
+ ICH82801AA = 0,
+ ICH82901AB,
+ INTEL440MX,
+ INTELICH2,
+ INTELICH3,
+ INTELICH4,
+ INTELICH5,
+ SI7012,
+ NVIDIA_NFORCE,
+ AMD768,
+ AMD8111
+};
+
+static char * card_names[] = {
+ "Intel ICH 82801AA",
+ "Intel ICH 82901AB",
+ "Intel 440MX",
+ "Intel ICH2",
+ "Intel ICH3",
+ "Intel ICH4",
+ "Intel ICH5",
+ "SiS 7012",
+ "NVIDIA nForce Audio",
+ "AMD 768",
+ "AMD-8111 IOHub"
+};
+
+/* These are capabilities (and bugs) the chipsets _can_ have */
+static struct {
+ int16_t nr_ac97;
+#define CAP_MMIO 0x0001
+#define CAP_20BIT_AUDIO_SUPPORT 0x0002
+ u_int16_t flags;
+} card_cap[] = {
+ { 1, 0x0000 }, /* ICH82801AA */
+ { 1, 0x0000 }, /* ICH82901AB */
+ { 1, 0x0000 }, /* INTEL440MX */
+ { 1, 0x0000 }, /* INTELICH2 */
+ { 2, 0x0000 }, /* INTELICH3 */
+ { 3, 0x0003 }, /* INTELICH4 */
+ { 3, 0x0003 }, /* INTELICH5 */
+ /*@FIXME to be verified*/ { 2, 0x0000 }, /* SI7012 */
+ /*@FIXME to be verified*/ { 2, 0x0000 }, /* NVIDIA_NFORCE */
+ /*@FIXME to be verified*/ { 2, 0x0000 }, /* AMD768 */
+ /*@FIXME to be verified*/ { 3, 0x0001 }, /* AMD8111 */
+};
+
+static struct pci_device_id i810_pci_tbl [] = {
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82801AA},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82901AB},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_440MX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTEL440MX},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH2},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH3},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH5},
+ {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7012,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, SI7012},
+ {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
+ {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
+ {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7445,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD768},
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_18,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
+
+ {0,}
+};
+
+MODULE_DEVICE_TABLE (pci, i810_pci_tbl);
+
+#ifdef CONFIG_PM
+#define PM_SUSPENDED(card) (card->pm_suspended)
+#else
+#define PM_SUSPENDED(card) (0)
+#endif
+
+/* "software" or virtual channel, an instance of opened /dev/dsp */
+struct i810_state {
+ unsigned int magic;
+ struct i810_card *card; /* Card info */
+
+ /* single open lock mechanism, only used for recording */
+ struct semaphore open_sem;
+ wait_queue_head_t open_wait;
+
+ /* file mode */
+ mode_t open_mode;
+
+ /* virtual channel number */
+ int virt;
+
+#ifdef CONFIG_PM
+ unsigned int pm_saved_dac_rate,pm_saved_adc_rate;
+#endif
+ struct dmabuf {
+ /* wave sample stuff */
+ unsigned int rate;
+ unsigned char fmt, enable, trigger;
+
+ /* hardware channel */
+ struct i810_channel *read_channel;
+ struct i810_channel *write_channel;
+
+ /* OSS buffer management stuff */
+ void *rawbuf;
+ dma_addr_t dma_handle;
+ unsigned buforder;
+ unsigned numfrag;
+ unsigned fragshift;
+
+ /* our buffer acts like a circular ring */
+ unsigned hwptr; /* where dma last started, updated by update_ptr */
+ unsigned swptr; /* where driver last clear/filled, updated by read/write */
+ int count; /* bytes to be consumed or been generated by dma machine */
+ unsigned total_bytes; /* total bytes dmaed by hardware */
+
+ unsigned error; /* number of over/underruns */
+ wait_queue_head_t wait; /* put process on wait queue when no more space in buffer */
+
+ /* redundant, but makes calculations easier */
+ /* what the hardware uses */
+ unsigned dmasize;
+ unsigned fragsize;
+ unsigned fragsamples;
+
+ /* what we tell the user to expect */
+ unsigned userfrags;
+ unsigned userfragsize;
+
+ /* OSS stuff */
+ unsigned mapped:1;
+ unsigned ready:1;
+ unsigned update_flag;
+ unsigned ossfragsize;
+ unsigned ossmaxfrags;
+ unsigned subdivision;
+ } dmabuf;
+};
+
+
+struct i810_card {
+ unsigned int magic;
+
+ /* We keep i810 cards in a linked list */
+ struct i810_card *next;
+
+ /* The i810 has a certain amount of cross channel interaction
+ so we use a single per card lock */
+ spinlock_t lock;
+
+ /* Control AC97 access serialization */
+ spinlock_t ac97_lock;
+
+ /* PCI device stuff */
+ struct pci_dev * pci_dev;
+ u16 pci_id;
+ u16 pci_id_internal; /* used to access card_cap[] */
+#ifdef CONFIG_PM
+ u16 pm_suspended;
+ int pm_saved_mixer_settings[SOUND_MIXER_NRDEVICES][NR_AC97];
+#endif
+ /* soundcore stuff */
+ int dev_audio;
+
+ /* structures for abstraction of hardware facilities, codecs, banks and channels*/
+ u16 ac97_id_map[NR_AC97];
+ struct ac97_codec *ac97_codec[NR_AC97];
+ struct i810_state *states[NR_HW_CH];
+ struct i810_channel *channel; /* 1:1 to states[] but diff. lifetime */
+ dma_addr_t chandma;
+
+ u16 ac97_features;
+ u16 ac97_status;
+ u16 channels;
+
+ /* hardware resources */
+ unsigned long ac97base;
+ unsigned long iobase;
+ u32 irq;
+
+ unsigned long ac97base_mmio_phys;
+ unsigned long iobase_mmio_phys;
+ u_int8_t __iomem *ac97base_mmio;
+ u_int8_t __iomem *iobase_mmio;
+
+ int use_mmio;
+
+ /* Function support */
+ struct i810_channel *(*alloc_pcm_channel)(struct i810_card *);
+ struct i810_channel *(*alloc_rec_pcm_channel)(struct i810_card *);
+ struct i810_channel *(*alloc_rec_mic_channel)(struct i810_card *);
+ void (*free_pcm_channel)(struct i810_card *, int chan);
+
+ /* We have a *very* long init time possibly, so use this to block */
+ /* attempts to open our devices before we are ready (stops oops'es) */
+ int initializing;
+};
+
+/* extract register offset from codec struct */
+#define IO_REG_OFF(codec) (((struct i810_card *) codec->private_data)->ac97_id_map[codec->id])
+
+#define I810_IOREAD(size, type, card, off) \
+({ \
+ type val; \
+ if (card->use_mmio) \
+ val=read##size(card->iobase_mmio+off); \
+ else \
+ val=in##size(card->iobase+off); \
+ val; \
+})
+
+#define I810_IOREADL(card, off) I810_IOREAD(l, u32, card, off)
+#define I810_IOREADW(card, off) I810_IOREAD(w, u16, card, off)
+#define I810_IOREADB(card, off) I810_IOREAD(b, u8, card, off)
+
+#define I810_IOWRITE(size, val, card, off) \
+({ \
+ if (card->use_mmio) \
+ write##size(val, card->iobase_mmio+off); \
+ else \
+ out##size(val, card->iobase+off); \
+})
+
+#define I810_IOWRITEL(val, card, off) I810_IOWRITE(l, val, card, off)
+#define I810_IOWRITEW(val, card, off) I810_IOWRITE(w, val, card, off)
+#define I810_IOWRITEB(val, card, off) I810_IOWRITE(b, val, card, off)
+
+#define GET_CIV(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_CIV), SG_LEN)
+#define GET_LVI(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_LVI), SG_LEN)
+
+/* set LVI from CIV */
+#define CIV_TO_LVI(card, port, off) \
+ I810_IOWRITEB(MODULOP2(GET_CIV((card), (port)) + (off), SG_LEN), (card), (port) + OFF_LVI)
+
+static struct ac97_quirk ac97_quirks[] __devinitdata = {
+ {
+ .vendor = 0x0e11,
+ .device = 0x00b8,
+ .name = "Compaq Evo D510C",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1028,
+ .device = 0x00d8,
+ .name = "Dell Precision 530", /* AD1885 */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1028,
+ .device = 0x0126,
+ .name = "Dell Optiplex GX260", /* AD1981A */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1028,
+ .device = 0x012d,
+ .name = "Dell Precision 450", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ { /* FIXME: which codec? */
+ .vendor = 0x103c,
+ .device = 0x00c3,
+ .name = "Hewlett-Packard onboard",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x103c,
+ .device = 0x12f1,
+ .name = "HP xw8200", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x103c,
+ .device = 0x3008,
+ .name = "HP xw4200", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x10f1,
+ .device = 0x2665,
+ .name = "Fujitsu-Siemens Celsius", /* AD1981? */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x10f1,
+ .device = 0x2885,
+ .name = "AMD64 Mobo", /* ALC650 */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x110a,
+ .device = 0x0056,
+ .name = "Fujitsu-Siemens Scenic", /* AD1981? */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x11d4,
+ .device = 0x5375,
+ .name = "ADI AD1985 (discrete)",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1462,
+ .device = 0x5470,
+ .name = "MSI P4 ATX 645 Ultra",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1734,
+ .device = 0x0088,
+ .name = "Fujitsu-Siemens D1522", /* AD1981 */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x8086,
+ .device = 0x4856,
+ .name = "Intel D845WN (82801BA)",
+ .type = AC97_TUNE_SWAP_HP
+ },
+ {
+ .vendor = 0x8086,
+ .device = 0x4d44,
+ .name = "Intel D850EMV2", /* AD1885 */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x8086,
+ .device = 0x4d56,
+ .name = "Intel ICH/AD1885",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x1028,
+ .device = 0x012d,
+ .name = "Dell Precision 450", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x103c,
+ .device = 0x3008,
+ .name = "HP xw4200", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .vendor = 0x103c,
+ .device = 0x12f1,
+ .name = "HP xw8200", /* AD1981B*/
+ .type = AC97_TUNE_HP_ONLY
+ },
+ { } /* terminator */
+};
+
+static struct i810_card *devs = NULL;
+
+static int i810_open_mixdev(struct inode *inode, struct file *file);
+static int i810_ioctl_mixdev(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg);
+static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data);
+static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg);
+static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data);
+static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg);
+static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data);
+
+static struct i810_channel *i810_alloc_pcm_channel(struct i810_card *card)
+{
+ if(card->channel[1].used==1)
+ return NULL;
+ card->channel[1].used=1;
+ return &card->channel[1];
+}
+
+static struct i810_channel *i810_alloc_rec_pcm_channel(struct i810_card *card)
+{
+ if(card->channel[0].used==1)
+ return NULL;
+ card->channel[0].used=1;
+ return &card->channel[0];
+}
+
+static struct i810_channel *i810_alloc_rec_mic_channel(struct i810_card *card)
+{
+ if(card->channel[2].used==1)
+ return NULL;
+ card->channel[2].used=1;
+ return &card->channel[2];
+}
+
+static void i810_free_pcm_channel(struct i810_card *card, int channel)
+{
+ card->channel[channel].used=0;
+}
+
+static int i810_valid_spdif_rate ( struct ac97_codec *codec, int rate )
+{
+ unsigned long id = 0L;
+
+ id = (i810_ac97_get(codec, AC97_VENDOR_ID1) << 16);
+ id |= i810_ac97_get(codec, AC97_VENDOR_ID2) & 0xffff;
+#ifdef DEBUG
+ printk ( "i810_audio: codec = %s, codec_id = 0x%08lx\n", codec->name, id);
+#endif
+ switch ( id ) {
+ case 0x41445361: /* AD1886 */
+ if (rate == 48000) {
+ return 1;
+ }
+ break;
+ default: /* all other codecs, until we know otherwiae */
+ if (rate == 48000 || rate == 44100 || rate == 32000) {
+ return 1;
+ }
+ break;
+ }
+ return (0);
+}
+
+/* i810_set_spdif_output
+ *
+ * Configure the S/PDIF output transmitter. When we turn on
+ * S/PDIF, we turn off the analog output. This may not be
+ * the right thing to do.
+ *
+ * Assumptions:
+ * The DSP sample rate must already be set to a supported
+ * S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort.
+ */
+static int i810_set_spdif_output(struct i810_state *state, int slots, int rate)
+{
+ int vol;
+ int aud_reg;
+ int r = 0;
+ struct ac97_codec *codec = state->card->ac97_codec[0];
+
+ if(!codec->codec_ops->digital) {
+ state->card->ac97_status &= ~SPDIF_ON;
+ } else {
+ if ( slots == -1 ) { /* Turn off S/PDIF */
+ codec->codec_ops->digital(codec, 0, 0, 0);
+ /* If the volume wasn't muted before we turned on S/PDIF, unmute it */
+ if ( !(state->card->ac97_status & VOL_MUTED) ) {
+ aud_reg = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
+ i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (aud_reg & ~VOL_MUTED));
+ }
+ state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON);
+ return 0;
+ }
+
+ vol = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
+ state->card->ac97_status = vol & VOL_MUTED;
+
+ r = codec->codec_ops->digital(codec, slots, rate, 0);
+
+ if(r)
+ state->card->ac97_status |= SPDIF_ON;
+ else
+ state->card->ac97_status &= ~SPDIF_ON;
+
+ /* Mute the analog output */
+ /* Should this only mute the PCM volume??? */
+ i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (vol | VOL_MUTED));
+ }
+ return r;
+}
+
+/* i810_set_dac_channels
+ *
+ * Configure the codec's multi-channel DACs
+ *
+ * The logic is backwards. Setting the bit to 1 turns off the DAC.
+ *
+ * What about the ICH? We currently configure it using the
+ * SNDCTL_DSP_CHANNELS ioctl. If we're turnning on the DAC,
+ * does that imply that we want the ICH set to support
+ * these channels?
+ *
+ * TODO:
+ * vailidate that the codec really supports these DACs
+ * before turning them on.
+ */
+static void i810_set_dac_channels(struct i810_state *state, int channel)
+{
+ int aud_reg;
+ struct ac97_codec *codec = state->card->ac97_codec[0];
+
+ /* No codec, no setup */
+
+ if(codec == NULL)
+ return;
+
+ aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
+ aud_reg |= AC97_EA_PRI | AC97_EA_PRJ | AC97_EA_PRK;
+ state->card->ac97_status &= ~(SURR_ON | CENTER_LFE_ON);
+
+ switch ( channel ) {
+ case 2: /* always enabled */
+ break;
+ case 4:
+ aud_reg &= ~AC97_EA_PRJ;
+ state->card->ac97_status |= SURR_ON;
+ break;
+ case 6:
+ aud_reg &= ~(AC97_EA_PRJ | AC97_EA_PRI | AC97_EA_PRK);
+ state->card->ac97_status |= SURR_ON | CENTER_LFE_ON;
+ break;
+ default:
+ break;
+ }
+ i810_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
+
+}
+
+
+/* set playback sample rate */
+static unsigned int i810_set_dac_rate(struct i810_state * state, unsigned int rate)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ u32 new_rate;
+ struct ac97_codec *codec=state->card->ac97_codec[0];
+
+ if(!(state->card->ac97_features&0x0001))
+ {
+ dmabuf->rate = clocking;
+#ifdef DEBUG
+ printk("Asked for %d Hz, but ac97_features says we only do %dHz. Sorry!\n",
+ rate,clocking);
+#endif
+ return clocking;
+ }
+
+ if (rate > 48000)
+ rate = 48000;
+ if (rate < 8000)
+ rate = 8000;
+ dmabuf->rate = rate;
+
+ /*
+ * Adjust for misclocked crap
+ */
+ rate = ( rate * clocking)/48000;
+ if(strict_clocking && rate < 8000) {
+ rate = 8000;
+ dmabuf->rate = (rate * 48000)/clocking;
+ }
+
+ new_rate=ac97_set_dac_rate(codec, rate);
+ if(new_rate != rate) {
+ dmabuf->rate = (new_rate * 48000)/clocking;
+ }
+#ifdef DEBUG
+ printk("i810_audio: called i810_set_dac_rate : asked for %d, got %d\n", rate, dmabuf->rate);
+#endif
+ rate = new_rate;
+ return dmabuf->rate;
+}
+
+/* set recording sample rate */
+static unsigned int i810_set_adc_rate(struct i810_state * state, unsigned int rate)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ u32 new_rate;
+ struct ac97_codec *codec=state->card->ac97_codec[0];
+
+ if(!(state->card->ac97_features&0x0001))
+ {
+ dmabuf->rate = clocking;
+ return clocking;
+ }
+
+ if (rate > 48000)
+ rate = 48000;
+ if (rate < 8000)
+ rate = 8000;
+ dmabuf->rate = rate;
+
+ /*
+ * Adjust for misclocked crap
+ */
+
+ rate = ( rate * clocking)/48000;
+ if(strict_clocking && rate < 8000) {
+ rate = 8000;
+ dmabuf->rate = (rate * 48000)/clocking;
+ }
+
+ new_rate = ac97_set_adc_rate(codec, rate);
+
+ if(new_rate != rate) {
+ dmabuf->rate = (new_rate * 48000)/clocking;
+ rate = new_rate;
+ }
+#ifdef DEBUG
+ printk("i810_audio: called i810_set_adc_rate : rate = %d/%d\n", dmabuf->rate, rate);
+#endif
+ return dmabuf->rate;
+}
+
+/* get current playback/recording dma buffer pointer (byte offset from LBA),
+ called with spinlock held! */
+
+static inline unsigned i810_get_dma_addr(struct i810_state *state, int rec)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned int civ, offset, port, port_picb, bytes = 2;
+
+ if (!dmabuf->enable)
+ return 0;
+
+ if (rec)
+ port = dmabuf->read_channel->port;
+ else
+ port = dmabuf->write_channel->port;
+
+ if(state->card->pci_id == PCI_DEVICE_ID_SI_7012) {
+ port_picb = port + OFF_SR;
+ bytes = 1;
+ } else
+ port_picb = port + OFF_PICB;
+
+ do {
+ civ = GET_CIV(state->card, port);
+ offset = I810_IOREADW(state->card, port_picb);
+ /* Must have a delay here! */
+ if(offset == 0)
+ udelay(1);
+ /* Reread both registers and make sure that that total
+ * offset from the first reading to the second is 0.
+ * There is an issue with SiS hardware where it will count
+ * picb down to 0, then update civ to the next value,
+ * then set the new picb to fragsize bytes. We can catch
+ * it between the civ update and the picb update, making
+ * it look as though we are 1 fragsize ahead of where we
+ * are. The next to we get the address though, it will
+ * be back in the right place, and we will suddenly think
+ * we just went forward dmasize - fragsize bytes, causing
+ * totally stupid *huge* dma overrun messages. We are
+ * assuming that the 1us delay is more than long enough
+ * that we won't have to worry about the chip still being
+ * out of sync with reality ;-)
+ */
+ } while (civ != GET_CIV(state->card, port) || offset != I810_IOREADW(state->card, port_picb));
+
+ return (((civ + 1) * dmabuf->fragsize - (bytes * offset))
+ % dmabuf->dmasize);
+}
+
+/* Stop recording (lock held) */
+static inline void __stop_adc(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ struct i810_card *card = state->card;
+
+ dmabuf->enable &= ~ADC_RUNNING;
+ I810_IOWRITEB(0, card, PI_CR);
+ // wait for the card to acknowledge shutdown
+ while( I810_IOREADB(card, PI_CR) != 0 ) ;
+ // now clear any latent interrupt bits (like the halt bit)
+ if(card->pci_id == PCI_DEVICE_ID_SI_7012)
+ I810_IOWRITEB( I810_IOREADB(card, PI_PICB), card, PI_PICB );
+ else
+ I810_IOWRITEB( I810_IOREADB(card, PI_SR), card, PI_SR );
+ I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PI, card, GLOB_STA);
+}
+
+static void stop_adc(struct i810_state *state)
+{
+ struct i810_card *card = state->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ __stop_adc(state);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void __start_adc(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+
+ if (dmabuf->count < dmabuf->dmasize && dmabuf->ready && !dmabuf->enable &&
+ (dmabuf->trigger & PCM_ENABLE_INPUT)) {
+ dmabuf->enable |= ADC_RUNNING;
+ // Interrupt enable, LVI enable, DMA enable
+ I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PI_CR);
+ }
+}
+
+static void start_adc(struct i810_state *state)
+{
+ struct i810_card *card = state->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ __start_adc(state);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/* stop playback (lock held) */
+static inline void __stop_dac(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ struct i810_card *card = state->card;
+
+ dmabuf->enable &= ~DAC_RUNNING;
+ I810_IOWRITEB(0, card, PO_CR);
+ // wait for the card to acknowledge shutdown
+ while( I810_IOREADB(card, PO_CR) != 0 ) ;
+ // now clear any latent interrupt bits (like the halt bit)
+ if(card->pci_id == PCI_DEVICE_ID_SI_7012)
+ I810_IOWRITEB( I810_IOREADB(card, PO_PICB), card, PO_PICB );
+ else
+ I810_IOWRITEB( I810_IOREADB(card, PO_SR), card, PO_SR );
+ I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PO, card, GLOB_STA);
+}
+
+static void stop_dac(struct i810_state *state)
+{
+ struct i810_card *card = state->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ __stop_dac(state);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void __start_dac(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+
+ if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
+ (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
+ dmabuf->enable |= DAC_RUNNING;
+ // Interrupt enable, LVI enable, DMA enable
+ I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PO_CR);
+ }
+}
+static void start_dac(struct i810_state *state)
+{
+ struct i810_card *card = state->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ __start_dac(state);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+#define DMABUF_DEFAULTORDER (16-PAGE_SHIFT)
+#define DMABUF_MINORDER 1
+
+/* allocate DMA buffer, playback and recording buffer should be allocated separately */
+static int alloc_dmabuf(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ void *rawbuf= NULL;
+ int order, size;
+ struct page *page, *pend;
+
+ /* If we don't have any oss frag params, then use our default ones */
+ if(dmabuf->ossmaxfrags == 0)
+ dmabuf->ossmaxfrags = 4;
+ if(dmabuf->ossfragsize == 0)
+ dmabuf->ossfragsize = (PAGE_SIZE<<DMABUF_DEFAULTORDER)/dmabuf->ossmaxfrags;
+ size = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
+
+ if(dmabuf->rawbuf && (PAGE_SIZE << dmabuf->buforder) == size)
+ return 0;
+ /* alloc enough to satisfy the oss params */
+ for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) {
+ if ( (PAGE_SIZE<<order) > size )
+ continue;
+ if ((rawbuf = pci_alloc_consistent(state->card->pci_dev,
+ PAGE_SIZE << order,
+ &dmabuf->dma_handle)))
+ break;
+ }
+ if (!rawbuf)
+ return -ENOMEM;
+
+
+#ifdef DEBUG
+ printk("i810_audio: allocated %ld (order = %d) bytes at %p\n",
+ PAGE_SIZE << order, order, rawbuf);
+#endif
+
+ dmabuf->ready = dmabuf->mapped = 0;
+ dmabuf->rawbuf = rawbuf;
+ dmabuf->buforder = order;
+
+ /* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
+ pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1);
+ for (page = virt_to_page(rawbuf); page <= pend; page++)
+ SetPageReserved(page);
+
+ return 0;
+}
+
+/* free DMA buffer */
+static void dealloc_dmabuf(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ struct page *page, *pend;
+
+ if (dmabuf->rawbuf) {
+ /* undo marking the pages as reserved */
+ pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1);
+ for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++)
+ ClearPageReserved(page);
+ pci_free_consistent(state->card->pci_dev, PAGE_SIZE << dmabuf->buforder,
+ dmabuf->rawbuf, dmabuf->dma_handle);
+ }
+ dmabuf->rawbuf = NULL;
+ dmabuf->mapped = dmabuf->ready = 0;
+}
+
+static int prog_dmabuf(struct i810_state *state, unsigned rec)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ struct i810_channel *c;
+ struct sg_item *sg;
+ unsigned long flags;
+ int ret;
+ unsigned fragint;
+ int i;
+
+ spin_lock_irqsave(&state->card->lock, flags);
+ if(dmabuf->enable & DAC_RUNNING)
+ __stop_dac(state);
+ if(dmabuf->enable & ADC_RUNNING)
+ __stop_adc(state);
+ dmabuf->total_bytes = 0;
+ dmabuf->count = dmabuf->error = 0;
+ dmabuf->swptr = dmabuf->hwptr = 0;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+
+ /* allocate DMA buffer, let alloc_dmabuf determine if we are already
+ * allocated well enough or if we should replace the current buffer
+ * (assuming one is already allocated, if it isn't, then allocate it).
+ */
+ if ((ret = alloc_dmabuf(state)))
+ return ret;
+
+ /* FIXME: figure out all this OSS fragment stuff */
+ /* I did, it now does what it should according to the OSS API. DL */
+ /* We may not have realloced our dmabuf, but the fragment size to
+ * fragment number ratio may have changed, so go ahead and reprogram
+ * things
+ */
+ dmabuf->dmasize = PAGE_SIZE << dmabuf->buforder;
+ dmabuf->numfrag = SG_LEN;
+ dmabuf->fragsize = dmabuf->dmasize/dmabuf->numfrag;
+ dmabuf->fragsamples = dmabuf->fragsize >> 1;
+ dmabuf->fragshift = ffs(dmabuf->fragsize) - 1;
+ dmabuf->userfragsize = dmabuf->ossfragsize;
+ dmabuf->userfrags = dmabuf->dmasize/dmabuf->ossfragsize;
+
+ memset(dmabuf->rawbuf, 0, dmabuf->dmasize);
+
+ if(dmabuf->ossmaxfrags == 4) {
+ fragint = 8;
+ } else if (dmabuf->ossmaxfrags == 8) {
+ fragint = 4;
+ } else if (dmabuf->ossmaxfrags == 16) {
+ fragint = 2;
+ } else {
+ fragint = 1;
+ }
+ /*
+ * Now set up the ring
+ */
+ if(dmabuf->read_channel)
+ c = dmabuf->read_channel;
+ else
+ c = dmabuf->write_channel;
+ while(c != NULL) {
+ sg=&c->sg[0];
+ /*
+ * Load up 32 sg entries and take an interrupt at half
+ * way (we might want more interrupts later..)
+ */
+
+ for(i=0;i<dmabuf->numfrag;i++)
+ {
+ sg->busaddr=(u32)dmabuf->dma_handle+dmabuf->fragsize*i;
+ // the card will always be doing 16bit stereo
+ sg->control=dmabuf->fragsamples;
+ if(state->card->pci_id == PCI_DEVICE_ID_SI_7012)
+ sg->control <<= 1;
+ sg->control|=CON_BUFPAD;
+ // set us up to get IOC interrupts as often as needed to
+ // satisfy numfrag requirements, no more
+ if( ((i+1) % fragint) == 0) {
+ sg->control|=CON_IOC;
+ }
+ sg++;
+ }
+ spin_lock_irqsave(&state->card->lock, flags);
+ I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */
+ while( I810_IOREADB(state->card, c->port+OFF_CR) & 0x02 ) ;
+ I810_IOWRITEL((u32)state->card->chandma +
+ c->num*sizeof(struct i810_channel),
+ state->card, c->port+OFF_BDBAR);
+ CIV_TO_LVI(state->card, c->port, 0);
+
+ spin_unlock_irqrestore(&state->card->lock, flags);
+
+ if(c != dmabuf->write_channel)
+ c = dmabuf->write_channel;
+ else
+ c = NULL;
+ }
+
+ /* set the ready flag for the dma buffer */
+ dmabuf->ready = 1;
+
+#ifdef DEBUG
+ printk("i810_audio: prog_dmabuf, sample rate = %d, format = %d,\n\tnumfrag = %d, "
+ "fragsize = %d dmasize = %d\n",
+ dmabuf->rate, dmabuf->fmt, dmabuf->numfrag,
+ dmabuf->fragsize, dmabuf->dmasize);
+#endif
+
+ return 0;
+}
+
+static void __i810_update_lvi(struct i810_state *state, int rec)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ int x, port;
+ int trigger;
+ int count, fragsize;
+ void (*start)(struct i810_state *);
+
+ count = dmabuf->count;
+ if (rec) {
+ port = dmabuf->read_channel->port;
+ trigger = PCM_ENABLE_INPUT;
+ start = __start_adc;
+ count = dmabuf->dmasize - count;
+ } else {
+ port = dmabuf->write_channel->port;
+ trigger = PCM_ENABLE_OUTPUT;
+ start = __start_dac;
+ }
+
+ /* Do not process partial fragments. */
+ fragsize = dmabuf->fragsize;
+ if (count < fragsize)
+ return;
+
+ /* if we are currently stopped, then our CIV is actually set to our
+ * *last* sg segment and we are ready to wrap to the next. However,
+ * if we set our LVI to the last sg segment, then it won't wrap to
+ * the next sg segment, it won't even get a start. So, instead, when
+ * we are stopped, we set both the LVI value and also we increment
+ * the CIV value to the next sg segment to be played so that when
+ * we call start, things will operate properly. Since the CIV can't
+ * be written to directly for this purpose, we set the LVI to CIV + 1
+ * temporarily. Once the engine has started we set the LVI to its
+ * final value.
+ */
+ if (!dmabuf->enable && dmabuf->ready) {
+ if (!(dmabuf->trigger & trigger))
+ return;
+
+ CIV_TO_LVI(state->card, port, 1);
+
+ start(state);
+ while (!(I810_IOREADB(state->card, port + OFF_CR) & ((1<<4) | (1<<2))))
+ ;
+ }
+
+ /* MASKP2(swptr, fragsize) - 1 is the tail of our transfer */
+ x = MODULOP2(MASKP2(dmabuf->swptr, fragsize) - 1, dmabuf->dmasize);
+ x >>= dmabuf->fragshift;
+ I810_IOWRITEB(x, state->card, port + OFF_LVI);
+}
+
+static void i810_update_lvi(struct i810_state *state, int rec)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned long flags;
+
+ if(!dmabuf->ready)
+ return;
+ spin_lock_irqsave(&state->card->lock, flags);
+ __i810_update_lvi(state, rec);
+ spin_unlock_irqrestore(&state->card->lock, flags);
+}
+
+/* update buffer manangement pointers, especially, dmabuf->count and dmabuf->hwptr */
+static void i810_update_ptr(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned hwptr;
+ unsigned fragmask, dmamask;
+ int diff;
+
+ fragmask = MASKP2(~0, dmabuf->fragsize);
+ dmamask = MODULOP2(~0, dmabuf->dmasize);
+
+ /* error handling and process wake up for ADC */
+ if (dmabuf->enable == ADC_RUNNING) {
+ /* update hardware pointer */
+ hwptr = i810_get_dma_addr(state, 1) & fragmask;
+ diff = (hwptr - dmabuf->hwptr) & dmamask;
+#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
+ printk("ADC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
+#endif
+ dmabuf->hwptr = hwptr;
+ dmabuf->total_bytes += diff;
+ dmabuf->count += diff;
+ if (dmabuf->count > dmabuf->dmasize) {
+ /* buffer underrun or buffer overrun */
+ /* this is normal for the end of a read */
+ /* only give an error if we went past the */
+ /* last valid sg entry */
+ if (GET_CIV(state->card, PI_BASE) !=
+ GET_LVI(state->card, PI_BASE)) {
+ printk(KERN_WARNING "i810_audio: DMA overrun on read\n");
+ dmabuf->error++;
+ }
+ }
+ if (diff)
+ wake_up(&dmabuf->wait);
+ }
+ /* error handling and process wake up for DAC */
+ if (dmabuf->enable == DAC_RUNNING) {
+ /* update hardware pointer */
+ hwptr = i810_get_dma_addr(state, 0) & fragmask;
+ diff = (hwptr - dmabuf->hwptr) & dmamask;
+#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
+ printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
+#endif
+ dmabuf->hwptr = hwptr;
+ dmabuf->total_bytes += diff;
+ dmabuf->count -= diff;
+ if (dmabuf->count < 0) {
+ /* buffer underrun or buffer overrun */
+ /* this is normal for the end of a write */
+ /* only give an error if we went past the */
+ /* last valid sg entry */
+ if (GET_CIV(state->card, PO_BASE) !=
+ GET_LVI(state->card, PO_BASE)) {
+ printk(KERN_WARNING "i810_audio: DMA overrun on write\n");
+ printk("i810_audio: CIV %d, LVI %d, hwptr %x, "
+ "count %d\n",
+ GET_CIV(state->card, PO_BASE),
+ GET_LVI(state->card, PO_BASE),
+ dmabuf->hwptr, dmabuf->count);
+ dmabuf->error++;
+ }
+ }
+ if (diff)
+ wake_up(&dmabuf->wait);
+ }
+}
+
+static inline int i810_get_free_write_space(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ int free;
+
+ i810_update_ptr(state);
+ // catch underruns during playback
+ if (dmabuf->count < 0) {
+ dmabuf->count = 0;
+ dmabuf->swptr = dmabuf->hwptr;
+ }
+ free = dmabuf->dmasize - dmabuf->count;
+ if(free < 0)
+ return(0);
+ return(free);
+}
+
+static inline int i810_get_available_read_data(struct i810_state *state)
+{
+ struct dmabuf *dmabuf = &state->dmabuf;
+ int avail;
+
+ i810_update_ptr(state);
+ // catch overruns during record
+ if (dmabuf->count > dmabuf->dmasize) {
+ dmabuf->count = dmabuf->dmasize;
+ dmabuf->swptr = dmabuf->hwptr;
+ }
+ avail = dmabuf->count;
+ if(avail < 0)
+ return(0);
+ return(avail);
+}
+
+static inline void fill_partial_frag(struct dmabuf *dmabuf)
+{
+ unsigned fragsize;
+ unsigned swptr, len;
+
+ fragsize = dmabuf->fragsize;
+ swptr = dmabuf->swptr;
+ len = fragsize - MODULOP2(dmabuf->swptr, fragsize);
+ if (len == fragsize)
+ return;
+
+ memset(dmabuf->rawbuf + swptr, '\0', len);
+ dmabuf->swptr = MODULOP2(swptr + len, dmabuf->dmasize);
+ dmabuf->count += len;
+}
+
+static int drain_dac(struct i810_state *state, int signals_allowed)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned long flags;
+ unsigned long tmo;
+ int count;
+
+ if (!dmabuf->ready)
+ return 0;
+ if(dmabuf->mapped) {
+ stop_dac(state);
+ return 0;
+ }
+
+ spin_lock_irqsave(&state->card->lock, flags);
+
+ fill_partial_frag(dmabuf);
+
+ /*
+ * This will make sure that our LVI is correct, that our
+ * pointer is updated, and that the DAC is running. We
+ * have to force the setting of dmabuf->trigger to avoid
+ * any possible deadlocks.
+ */
+ dmabuf->trigger = PCM_ENABLE_OUTPUT;
+ __i810_update_lvi(state, 0);
+
+ spin_unlock_irqrestore(&state->card->lock, flags);
+
+ add_wait_queue(&dmabuf->wait, &wait);
+ for (;;) {
+
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_update_ptr(state);
+ count = dmabuf->count;
+
+ /* It seems that we have to set the current state to
+ * TASK_INTERRUPTIBLE every time to make the process
+ * really go to sleep. This also has to be *after* the
+ * update_ptr() call because update_ptr is likely to
+ * do a wake_up() which will unset this before we ever
+ * try to sleep, resuling in a tight loop in this code
+ * instead of actually sleeping and waiting for an
+ * interrupt to wake us up!
+ */
+ __set_current_state(signals_allowed ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
+ spin_unlock_irqrestore(&state->card->lock, flags);
+
+ if (count <= 0)
+ break;
+
+ if (signal_pending(current) && signals_allowed) {
+ break;
+ }
+
+ /*
+ * set the timeout to significantly longer than it *should*
+ * take for the DAC to drain the DMA buffer
+ */
+ tmo = (count * HZ) / (dmabuf->rate);
+ if (!schedule_timeout(tmo >= 2 ? tmo : 2)){
+ printk(KERN_ERR "i810_audio: drain_dac, dma timeout?\n");
+ count = 0;
+ break;
+ }
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dmabuf->wait, &wait);
+ if(count > 0 && signal_pending(current) && signals_allowed)
+ return -ERESTARTSYS;
+ stop_dac(state);
+ return 0;
+}
+
+static void i810_channel_interrupt(struct i810_card *card)
+{
+ int i, count;
+
+#ifdef DEBUG_INTERRUPTS
+ printk("CHANNEL ");
+#endif
+ for(i=0;i<NR_HW_CH;i++)
+ {
+ struct i810_state *state = card->states[i];
+ struct i810_channel *c;
+ struct dmabuf *dmabuf;
+ unsigned long port;
+ u16 status;
+
+ if(!state)
+ continue;
+ if(!state->dmabuf.ready)
+ continue;
+ dmabuf = &state->dmabuf;
+ if(dmabuf->enable & DAC_RUNNING) {
+ c=dmabuf->write_channel;
+ } else if(dmabuf->enable & ADC_RUNNING) {
+ c=dmabuf->read_channel;
+ } else /* This can occur going from R/W to close */
+ continue;
+
+ port = c->port;
+
+ if(card->pci_id == PCI_DEVICE_ID_SI_7012)
+ status = I810_IOREADW(card, port + OFF_PICB);
+ else
+ status = I810_IOREADW(card, port + OFF_SR);
+
+#ifdef DEBUG_INTERRUPTS
+ printk("NUM %d PORT %X IRQ ( ST%d ", c->num, c->port, status);
+#endif
+ if(status & DMA_INT_COMPLETE)
+ {
+ /* only wake_up() waiters if this interrupt signals
+ * us being beyond a userfragsize of data open or
+ * available, and i810_update_ptr() does that for
+ * us
+ */
+ i810_update_ptr(state);
+#ifdef DEBUG_INTERRUPTS
+ printk("COMP %d ", dmabuf->hwptr /
+ dmabuf->fragsize);
+#endif
+ }
+ if(status & (DMA_INT_LVI | DMA_INT_DCH))
+ {
+ /* wake_up() unconditionally on LVI and DCH */
+ i810_update_ptr(state);
+ wake_up(&dmabuf->wait);
+#ifdef DEBUG_INTERRUPTS
+ if(status & DMA_INT_LVI)
+ printk("LVI ");
+ if(status & DMA_INT_DCH)
+ printk("DCH -");
+#endif
+ count = dmabuf->count;
+ if(dmabuf->enable & ADC_RUNNING)
+ count = dmabuf->dmasize - count;
+ if (count >= (int)dmabuf->fragsize) {
+ I810_IOWRITEB(I810_IOREADB(card, port+OFF_CR) | 1, card, port+OFF_CR);
+#ifdef DEBUG_INTERRUPTS
+ printk(" CONTINUE ");
+#endif
+ } else {
+ if (dmabuf->enable & DAC_RUNNING)
+ __stop_dac(state);
+ if (dmabuf->enable & ADC_RUNNING)
+ __stop_adc(state);
+ dmabuf->enable = 0;
+#ifdef DEBUG_INTERRUPTS
+ printk(" STOP ");
+#endif
+ }
+ }
+ if(card->pci_id == PCI_DEVICE_ID_SI_7012)
+ I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_PICB);
+ else
+ I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_SR);
+ }
+#ifdef DEBUG_INTERRUPTS
+ printk(")\n");
+#endif
+}
+
+static irqreturn_t i810_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct i810_card *card = (struct i810_card *)dev_id;
+ u32 status;
+
+ spin_lock(&card->lock);
+
+ status = I810_IOREADL(card, GLOB_STA);
+
+ if(!(status & INT_MASK))
+ {
+ spin_unlock(&card->lock);
+ return IRQ_NONE; /* not for us */
+ }
+
+ if(status & (INT_PO|INT_PI|INT_MC))
+ i810_channel_interrupt(card);
+
+ /* clear 'em */
+ I810_IOWRITEL(status & INT_MASK, card, GLOB_STA);
+ spin_unlock(&card->lock);
+ return IRQ_HANDLED;
+}
+
+/* in this loop, dmabuf.count signifies the amount of data that is
+ waiting to be copied to the user's buffer. It is filled by the dma
+ machine and drained by this loop. */
+
+static ssize_t i810_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct i810_card *card=state ? state->card : NULL;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ ssize_t ret;
+ unsigned long flags;
+ unsigned int swptr;
+ int cnt;
+ int pending;
+ DECLARE_WAITQUEUE(waita, current);
+
+#ifdef DEBUG2
+ printk("i810_audio: i810_read called, count = %d\n", count);
+#endif
+
+ if (dmabuf->mapped)
+ return -ENXIO;
+ if (dmabuf->enable & DAC_RUNNING)
+ return -ENODEV;
+ if (!dmabuf->read_channel) {
+ dmabuf->ready = 0;
+ dmabuf->read_channel = card->alloc_rec_pcm_channel(card);
+ if (!dmabuf->read_channel) {
+ return -EBUSY;
+ }
+ }
+ if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
+ return ret;
+ if (!access_ok(VERIFY_WRITE, buffer, count))
+ return -EFAULT;
+ ret = 0;
+
+ pending = 0;
+
+ add_wait_queue(&dmabuf->wait, &waita);
+ while (count > 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&card->lock, flags);
+ if (PM_SUSPENDED(card)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ schedule();
+ if (signal_pending(current)) {
+ if (!ret) ret = -EAGAIN;
+ break;
+ }
+ continue;
+ }
+ cnt = i810_get_available_read_data(state);
+ swptr = dmabuf->swptr;
+ // this is to make the copy_to_user simpler below
+ if(cnt > (dmabuf->dmasize - swptr))
+ cnt = dmabuf->dmasize - swptr;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (cnt > count)
+ cnt = count;
+ if (cnt <= 0) {
+ unsigned long tmo;
+ /*
+ * Don't let us deadlock. The ADC won't start if
+ * dmabuf->trigger isn't set. A call to SETTRIGGER
+ * could have turned it off after we set it to on
+ * previously.
+ */
+ dmabuf->trigger = PCM_ENABLE_INPUT;
+ /*
+ * This does three things. Updates LVI to be correct,
+ * makes sure the ADC is running, and updates the
+ * hwptr.
+ */
+ i810_update_lvi(state,1);
+ if (file->f_flags & O_NONBLOCK) {
+ if (!ret) ret = -EAGAIN;
+ goto done;
+ }
+ /* Set the timeout to how long it would take to fill
+ * two of our buffers. If we haven't been woke up
+ * by then, then we know something is wrong.
+ */
+ tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
+ /* There are two situations when sleep_on_timeout returns, one is when
+ the interrupt is serviced correctly and the process is waked up by
+ ISR ON TIME. Another is when timeout is expired, which means that
+ either interrupt is NOT serviced correctly (pending interrupt) or it
+ is TOO LATE for the process to be scheduled to run (scheduler latency)
+ which results in a (potential) buffer overrun. And worse, there is
+ NOTHING we can do to prevent it. */
+ if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
+#ifdef DEBUG
+ printk(KERN_ERR "i810_audio: recording schedule timeout, "
+ "dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
+ dmabuf->dmasize, dmabuf->fragsize, dmabuf->count,
+ dmabuf->hwptr, dmabuf->swptr);
+#endif
+ /* a buffer overrun, we delay the recovery until next time the
+ while loop begin and we REALLY have space to record */
+ }
+ if (signal_pending(current)) {
+ ret = ret ? ret : -ERESTARTSYS;
+ goto done;
+ }
+ continue;
+ }
+
+ if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) {
+ if (!ret) ret = -EFAULT;
+ goto done;
+ }
+
+ swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ if (PM_SUSPENDED(card)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ continue;
+ }
+ dmabuf->swptr = swptr;
+ pending = dmabuf->count -= cnt;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ count -= cnt;
+ buffer += cnt;
+ ret += cnt;
+ }
+ done:
+ pending = dmabuf->dmasize - pending;
+ if (dmabuf->enable || pending >= dmabuf->userfragsize)
+ i810_update_lvi(state, 1);
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dmabuf->wait, &waita);
+
+ return ret;
+}
+
+/* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to
+ the soundcard. it is drained by the dma machine and filled by this loop. */
+static ssize_t i810_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct i810_card *card=state ? state->card : NULL;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ ssize_t ret;
+ unsigned long flags;
+ unsigned int swptr = 0;
+ int pending;
+ int cnt;
+ DECLARE_WAITQUEUE(waita, current);
+
+#ifdef DEBUG2
+ printk("i810_audio: i810_write called, count = %d\n", count);
+#endif
+
+ if (dmabuf->mapped)
+ return -ENXIO;
+ if (dmabuf->enable & ADC_RUNNING)
+ return -ENODEV;
+ if (!dmabuf->write_channel) {
+ dmabuf->ready = 0;
+ dmabuf->write_channel = card->alloc_pcm_channel(card);
+ if(!dmabuf->write_channel)
+ return -EBUSY;
+ }
+ if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
+ return ret;
+ if (!access_ok(VERIFY_READ, buffer, count))
+ return -EFAULT;
+ ret = 0;
+
+ pending = 0;
+
+ add_wait_queue(&dmabuf->wait, &waita);
+ while (count > 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&state->card->lock, flags);
+ if (PM_SUSPENDED(card)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ schedule();
+ if (signal_pending(current)) {
+ if (!ret) ret = -EAGAIN;
+ break;
+ }
+ continue;
+ }
+
+ cnt = i810_get_free_write_space(state);
+ swptr = dmabuf->swptr;
+ /* Bound the maximum size to how much we can copy to the
+ * dma buffer before we hit the end. If we have more to
+ * copy then it will get done in a second pass of this
+ * loop starting from the beginning of the buffer.
+ */
+ if(cnt > (dmabuf->dmasize - swptr))
+ cnt = dmabuf->dmasize - swptr;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+
+#ifdef DEBUG2
+ printk(KERN_INFO "i810_audio: i810_write: %d bytes available space\n", cnt);
+#endif
+ if (cnt > count)
+ cnt = count;
+ if (cnt <= 0) {
+ unsigned long tmo;
+ // There is data waiting to be played
+ /*
+ * Force the trigger setting since we would
+ * deadlock with it set any other way
+ */
+ dmabuf->trigger = PCM_ENABLE_OUTPUT;
+ i810_update_lvi(state,0);
+ if (file->f_flags & O_NONBLOCK) {
+ if (!ret) ret = -EAGAIN;
+ goto ret;
+ }
+ /* Not strictly correct but works */
+ tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
+ /* There are two situations when sleep_on_timeout returns, one is when
+ the interrupt is serviced correctly and the process is waked up by
+ ISR ON TIME. Another is when timeout is expired, which means that
+ either interrupt is NOT serviced correctly (pending interrupt) or it
+ is TOO LATE for the process to be scheduled to run (scheduler latency)
+ which results in a (potential) buffer underrun. And worse, there is
+ NOTHING we can do to prevent it. */
+ if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
+#ifdef DEBUG
+ printk(KERN_ERR "i810_audio: playback schedule timeout, "
+ "dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
+ dmabuf->dmasize, dmabuf->fragsize, dmabuf->count,
+ dmabuf->hwptr, dmabuf->swptr);
+#endif
+ /* a buffer underrun, we delay the recovery until next time the
+ while loop begin and we REALLY have data to play */
+ //return ret;
+ }
+ if (signal_pending(current)) {
+ if (!ret) ret = -ERESTARTSYS;
+ goto ret;
+ }
+ continue;
+ }
+ if (copy_from_user(dmabuf->rawbuf+swptr,buffer,cnt)) {
+ if (!ret) ret = -EFAULT;
+ goto ret;
+ }
+
+ swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
+
+ spin_lock_irqsave(&state->card->lock, flags);
+ if (PM_SUSPENDED(card)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ continue;
+ }
+
+ dmabuf->swptr = swptr;
+ pending = dmabuf->count += cnt;
+
+ count -= cnt;
+ buffer += cnt;
+ ret += cnt;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ }
+ret:
+ if (dmabuf->enable || pending >= dmabuf->userfragsize)
+ i810_update_lvi(state, 0);
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dmabuf->wait, &waita);
+
+ return ret;
+}
+
+/* No kernel lock - we have our own spinlock */
+static unsigned int i810_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned long flags;
+ unsigned int mask = 0;
+
+ if(!dmabuf->ready)
+ return 0;
+ poll_wait(file, &dmabuf->wait, wait);
+ spin_lock_irqsave(&state->card->lock, flags);
+ if (dmabuf->enable & ADC_RUNNING ||
+ dmabuf->trigger & PCM_ENABLE_INPUT) {
+ if (i810_get_available_read_data(state) >=
+ (signed)dmabuf->userfragsize)
+ mask |= POLLIN | POLLRDNORM;
+ }
+ if (dmabuf->enable & DAC_RUNNING ||
+ dmabuf->trigger & PCM_ENABLE_OUTPUT) {
+ if (i810_get_free_write_space(state) >=
+ (signed)dmabuf->userfragsize)
+ mask |= POLLOUT | POLLWRNORM;
+ }
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ return mask;
+}
+
+static int i810_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ int ret = -EINVAL;
+ unsigned long size;
+
+ lock_kernel();
+ if (vma->vm_flags & VM_WRITE) {
+ if (!dmabuf->write_channel &&
+ (dmabuf->write_channel =
+ state->card->alloc_pcm_channel(state->card)) == NULL) {
+ ret = -EBUSY;
+ goto out;
+ }
+ }
+ if (vma->vm_flags & VM_READ) {
+ if (!dmabuf->read_channel &&
+ (dmabuf->read_channel =
+ state->card->alloc_rec_pcm_channel(state->card)) == NULL) {
+ ret = -EBUSY;
+ goto out;
+ }
+ }
+ if ((ret = prog_dmabuf(state, 0)) != 0)
+ goto out;
+
+ ret = -EINVAL;
+ if (vma->vm_pgoff != 0)
+ goto out;
+ size = vma->vm_end - vma->vm_start;
+ if (size > (PAGE_SIZE << dmabuf->buforder))
+ goto out;
+ ret = -EAGAIN;
+ if (remap_pfn_range(vma, vma->vm_start,
+ virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT,
+ size, vma->vm_page_prot))
+ goto out;
+ dmabuf->mapped = 1;
+ dmabuf->trigger = 0;
+ ret = 0;
+#ifdef DEBUG_MMAP
+ printk("i810_audio: mmap'ed %ld bytes of data space\n", size);
+#endif
+out:
+ unlock_kernel();
+ return ret;
+}
+
+static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct i810_channel *c = NULL;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned long flags;
+ audio_buf_info abinfo;
+ count_info cinfo;
+ unsigned int i_glob_cnt;
+ int val = 0, ret;
+ struct ac97_codec *codec = state->card->ac97_codec[0];
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+
+#ifdef DEBUG
+ printk("i810_audio: i810_ioctl, arg=0x%x, cmd=", arg ? *p : 0);
+#endif
+
+ switch (cmd)
+ {
+ case OSS_GETVERSION:
+#ifdef DEBUG
+ printk("OSS_GETVERSION\n");
+#endif
+ return put_user(SOUND_VERSION, p);
+
+ case SNDCTL_DSP_RESET:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_RESET\n");
+#endif
+ spin_lock_irqsave(&state->card->lock, flags);
+ if (dmabuf->enable == DAC_RUNNING) {
+ c = dmabuf->write_channel;
+ __stop_dac(state);
+ }
+ if (dmabuf->enable == ADC_RUNNING) {
+ c = dmabuf->read_channel;
+ __stop_adc(state);
+ }
+ if (c != NULL) {
+ I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */
+ while ( I810_IOREADB(state->card, c->port+OFF_CR) & 2 )
+ cpu_relax();
+ I810_IOWRITEL((u32)state->card->chandma +
+ c->num*sizeof(struct i810_channel),
+ state->card, c->port+OFF_BDBAR);
+ CIV_TO_LVI(state->card, c->port, 0);
+ }
+
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ synchronize_irq(state->card->pci_dev->irq);
+ dmabuf->ready = 0;
+ dmabuf->swptr = dmabuf->hwptr = 0;
+ dmabuf->count = dmabuf->total_bytes = 0;
+ return 0;
+
+ case SNDCTL_DSP_SYNC:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SYNC\n");
+#endif
+ if (dmabuf->enable != DAC_RUNNING || file->f_flags & O_NONBLOCK)
+ return 0;
+ if((val = drain_dac(state, 1)))
+ return val;
+ dmabuf->total_bytes = 0;
+ return 0;
+
+ case SNDCTL_DSP_SPEED: /* set smaple rate */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SPEED\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+ if (val >= 0) {
+ if (file->f_mode & FMODE_WRITE) {
+ if ( (state->card->ac97_status & SPDIF_ON) ) { /* S/PDIF Enabled */
+ /* AD1886 only supports 48000, need to check that */
+ if ( i810_valid_spdif_rate ( codec, val ) ) {
+ /* Set DAC rate */
+ i810_set_spdif_output ( state, -1, 0 );
+ stop_dac(state);
+ dmabuf->ready = 0;
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_set_dac_rate(state, val);
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ /* Set S/PDIF transmitter rate. */
+ i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, val );
+ if ( ! (state->card->ac97_status & SPDIF_ON) ) {
+ val = dmabuf->rate;
+ }
+ } else { /* Not a valid rate for S/PDIF, ignore it */
+ val = dmabuf->rate;
+ }
+ } else {
+ stop_dac(state);
+ dmabuf->ready = 0;
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_set_dac_rate(state, val);
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ }
+ }
+ if (file->f_mode & FMODE_READ) {
+ stop_adc(state);
+ dmabuf->ready = 0;
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_set_adc_rate(state, val);
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ }
+ }
+ return put_user(dmabuf->rate, p);
+
+ case SNDCTL_DSP_STEREO: /* set stereo or mono channel */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_STEREO\n");
+#endif
+ if (dmabuf->enable & DAC_RUNNING) {
+ stop_dac(state);
+ }
+ if (dmabuf->enable & ADC_RUNNING) {
+ stop_adc(state);
+ }
+ return put_user(1, p);
+
+ case SNDCTL_DSP_GETBLKSIZE:
+ if (file->f_mode & FMODE_WRITE) {
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 0)))
+ return val;
+ }
+ if (file->f_mode & FMODE_READ) {
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 1)))
+ return val;
+ }
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETBLKSIZE %d\n", dmabuf->userfragsize);
+#endif
+ return put_user(dmabuf->userfragsize, p);
+
+ case SNDCTL_DSP_GETFMTS: /* Returns a mask of supported sample format*/
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETFMTS\n");
+#endif
+ return put_user(AFMT_S16_LE, p);
+
+ case SNDCTL_DSP_SETFMT: /* Select sample format */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SETFMT\n");
+#endif
+ return put_user(AFMT_S16_LE, p);
+
+ case SNDCTL_DSP_CHANNELS:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_CHANNELS\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+
+ if (val > 0) {
+ if (dmabuf->enable & DAC_RUNNING) {
+ stop_dac(state);
+ }
+ if (dmabuf->enable & ADC_RUNNING) {
+ stop_adc(state);
+ }
+ } else {
+ return put_user(state->card->channels, p);
+ }
+
+ /* ICH and ICH0 only support 2 channels */
+ if ( state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AA_5
+ || state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AB_5)
+ return put_user(2, p);
+
+ /* Multi-channel support was added with ICH2. Bits in */
+ /* Global Status and Global Control register are now */
+ /* used to indicate this. */
+
+ i_glob_cnt = I810_IOREADL(state->card, GLOB_CNT);
+
+ /* Current # of channels enabled */
+ if ( i_glob_cnt & 0x0100000 )
+ ret = 4;
+ else if ( i_glob_cnt & 0x0200000 )
+ ret = 6;
+ else
+ ret = 2;
+
+ switch ( val ) {
+ case 2: /* 2 channels is always supported */
+ I810_IOWRITEL(i_glob_cnt & 0xffcfffff,
+ state->card, GLOB_CNT);
+ /* Do we need to change mixer settings???? */
+ break;
+ case 4: /* Supported on some chipsets, better check first */
+ if ( state->card->channels >= 4 ) {
+ I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x100000,
+ state->card, GLOB_CNT);
+ /* Do we need to change mixer settings??? */
+ } else {
+ val = ret;
+ }
+ break;
+ case 6: /* Supported on some chipsets, better check first */
+ if ( state->card->channels >= 6 ) {
+ I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x200000,
+ state->card, GLOB_CNT);
+ /* Do we need to change mixer settings??? */
+ } else {
+ val = ret;
+ }
+ break;
+ default: /* nothing else is ever supported by the chipset */
+ val = ret;
+ break;
+ }
+
+ return put_user(val, p);
+
+ case SNDCTL_DSP_POST: /* the user has sent all data and is notifying us */
+ /* we update the swptr to the end of the last sg segment then return */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_POST\n");
+#endif
+ if(!dmabuf->ready || (dmabuf->enable != DAC_RUNNING))
+ return 0;
+ if((dmabuf->swptr % dmabuf->fragsize) != 0) {
+ val = dmabuf->fragsize - (dmabuf->swptr % dmabuf->fragsize);
+ dmabuf->swptr += val;
+ dmabuf->count += val;
+ }
+ return 0;
+
+ case SNDCTL_DSP_SUBDIVIDE:
+ if (dmabuf->subdivision)
+ return -EINVAL;
+ if (get_user(val, p))
+ return -EFAULT;
+ if (val != 1 && val != 2 && val != 4)
+ return -EINVAL;
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SUBDIVIDE %d\n", val);
+#endif
+ dmabuf->subdivision = val;
+ dmabuf->ready = 0;
+ return 0;
+
+ case SNDCTL_DSP_SETFRAGMENT:
+ if (get_user(val, p))
+ return -EFAULT;
+
+ dmabuf->ossfragsize = 1<<(val & 0xffff);
+ dmabuf->ossmaxfrags = (val >> 16) & 0xffff;
+ if (!dmabuf->ossfragsize || !dmabuf->ossmaxfrags)
+ return -EINVAL;
+ /*
+ * Bound the frag size into our allowed range of 256 - 4096
+ */
+ if (dmabuf->ossfragsize < 256)
+ dmabuf->ossfragsize = 256;
+ else if (dmabuf->ossfragsize > 4096)
+ dmabuf->ossfragsize = 4096;
+ /*
+ * The numfrags could be something reasonable, or it could
+ * be 0xffff meaning "Give me as much as possible". So,
+ * we check the numfrags * fragsize doesn't exceed our
+ * 64k buffer limit, nor is it less than our 8k minimum.
+ * If it fails either one of these checks, then adjust the
+ * number of fragments, not the size of them. It's OK if
+ * our number of fragments doesn't equal 32 or anything
+ * like our hardware based number now since we are using
+ * a different frag count for the hardware. Before we get
+ * into this though, bound the maxfrags to avoid overflow
+ * issues. A reasonable bound would be 64k / 256 since our
+ * maximum buffer size is 64k and our minimum frag size is
+ * 256. On the other end, our minimum buffer size is 8k and
+ * our maximum frag size is 4k, so the lower bound should
+ * be 2.
+ */
+
+ if(dmabuf->ossmaxfrags > 256)
+ dmabuf->ossmaxfrags = 256;
+ else if (dmabuf->ossmaxfrags < 2)
+ dmabuf->ossmaxfrags = 2;
+
+ val = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
+ while (val < 8192) {
+ val <<= 1;
+ dmabuf->ossmaxfrags <<= 1;
+ }
+ while (val > 65536) {
+ val >>= 1;
+ dmabuf->ossmaxfrags >>= 1;
+ }
+ dmabuf->ready = 0;
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SETFRAGMENT 0x%x, %d, %d\n", val,
+ dmabuf->ossfragsize, dmabuf->ossmaxfrags);
+#endif
+
+ return 0;
+
+ case SNDCTL_DSP_GETOSPACE:
+ if (!(file->f_mode & FMODE_WRITE))
+ return -EINVAL;
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
+ return val;
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_update_ptr(state);
+ abinfo.fragsize = dmabuf->userfragsize;
+ abinfo.fragstotal = dmabuf->userfrags;
+ if (dmabuf->mapped)
+ abinfo.bytes = dmabuf->dmasize;
+ else
+ abinfo.bytes = i810_get_free_write_space(state);
+ abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+#if defined(DEBUG) || defined(DEBUG_MMAP)
+ printk("SNDCTL_DSP_GETOSPACE %d, %d, %d, %d\n", abinfo.bytes,
+ abinfo.fragsize, abinfo.fragments, abinfo.fragstotal);
+#endif
+ return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
+
+ case SNDCTL_DSP_GETOPTR:
+ if (!(file->f_mode & FMODE_WRITE))
+ return -EINVAL;
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
+ return val;
+ spin_lock_irqsave(&state->card->lock, flags);
+ val = i810_get_free_write_space(state);
+ cinfo.bytes = dmabuf->total_bytes;
+ cinfo.ptr = dmabuf->hwptr;
+ cinfo.blocks = val/dmabuf->userfragsize;
+ if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
+ dmabuf->count += val;
+ dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
+ __i810_update_lvi(state, 0);
+ }
+ spin_unlock_irqrestore(&state->card->lock, flags);
+#if defined(DEBUG) || defined(DEBUG_MMAP)
+ printk("SNDCTL_DSP_GETOPTR %d, %d, %d, %d\n", cinfo.bytes,
+ cinfo.blocks, cinfo.ptr, dmabuf->count);
+#endif
+ return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
+
+ case SNDCTL_DSP_GETISPACE:
+ if (!(file->f_mode & FMODE_READ))
+ return -EINVAL;
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 1)) != 0)
+ return val;
+ spin_lock_irqsave(&state->card->lock, flags);
+ abinfo.bytes = i810_get_available_read_data(state);
+ abinfo.fragsize = dmabuf->userfragsize;
+ abinfo.fragstotal = dmabuf->userfrags;
+ abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+#if defined(DEBUG) || defined(DEBUG_MMAP)
+ printk("SNDCTL_DSP_GETISPACE %d, %d, %d, %d\n", abinfo.bytes,
+ abinfo.fragsize, abinfo.fragments, abinfo.fragstotal);
+#endif
+ return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
+
+ case SNDCTL_DSP_GETIPTR:
+ if (!(file->f_mode & FMODE_READ))
+ return -EINVAL;
+ if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
+ return val;
+ spin_lock_irqsave(&state->card->lock, flags);
+ val = i810_get_available_read_data(state);
+ cinfo.bytes = dmabuf->total_bytes;
+ cinfo.blocks = val/dmabuf->userfragsize;
+ cinfo.ptr = dmabuf->hwptr;
+ if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
+ dmabuf->count -= val;
+ dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
+ __i810_update_lvi(state, 1);
+ }
+ spin_unlock_irqrestore(&state->card->lock, flags);
+#if defined(DEBUG) || defined(DEBUG_MMAP)
+ printk("SNDCTL_DSP_GETIPTR %d, %d, %d, %d\n", cinfo.bytes,
+ cinfo.blocks, cinfo.ptr, dmabuf->count);
+#endif
+ return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
+
+ case SNDCTL_DSP_NONBLOCK:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_NONBLOCK\n");
+#endif
+ file->f_flags |= O_NONBLOCK;
+ return 0;
+
+ case SNDCTL_DSP_GETCAPS:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETCAPS\n");
+#endif
+ return put_user(DSP_CAP_REALTIME|DSP_CAP_TRIGGER|DSP_CAP_MMAP|DSP_CAP_BIND,
+ p);
+
+ case SNDCTL_DSP_GETTRIGGER:
+ val = 0;
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETTRIGGER 0x%x\n", dmabuf->trigger);
+#endif
+ return put_user(dmabuf->trigger, p);
+
+ case SNDCTL_DSP_SETTRIGGER:
+ if (get_user(val, p))
+ return -EFAULT;
+#if defined(DEBUG) || defined(DEBUG_MMAP)
+ printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val);
+#endif
+ /* silently ignore invalid PCM_ENABLE_xxx bits,
+ * like the other drivers do
+ */
+ if (!(file->f_mode & FMODE_READ ))
+ val &= ~PCM_ENABLE_INPUT;
+ if (!(file->f_mode & FMODE_WRITE ))
+ val &= ~PCM_ENABLE_OUTPUT;
+ if((file->f_mode & FMODE_READ) && !(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) {
+ stop_adc(state);
+ }
+ if((file->f_mode & FMODE_WRITE) && !(val & PCM_ENABLE_OUTPUT) && dmabuf->enable == DAC_RUNNING) {
+ stop_dac(state);
+ }
+ dmabuf->trigger = val;
+ if((val & PCM_ENABLE_OUTPUT) && !(dmabuf->enable & DAC_RUNNING)) {
+ if (!dmabuf->write_channel) {
+ dmabuf->ready = 0;
+ dmabuf->write_channel = state->card->alloc_pcm_channel(state->card);
+ if (!dmabuf->write_channel)
+ return -EBUSY;
+ }
+ if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
+ return ret;
+ if (dmabuf->mapped) {
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_update_ptr(state);
+ dmabuf->count = 0;
+ dmabuf->swptr = dmabuf->hwptr;
+ dmabuf->count = i810_get_free_write_space(state);
+ dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ }
+ i810_update_lvi(state, 0);
+ start_dac(state);
+ }
+ if((val & PCM_ENABLE_INPUT) && !(dmabuf->enable & ADC_RUNNING)) {
+ if (!dmabuf->read_channel) {
+ dmabuf->ready = 0;
+ dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card);
+ if (!dmabuf->read_channel)
+ return -EBUSY;
+ }
+ if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
+ return ret;
+ if (dmabuf->mapped) {
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_update_ptr(state);
+ dmabuf->swptr = dmabuf->hwptr;
+ dmabuf->count = 0;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+ }
+ i810_update_lvi(state, 1);
+ start_adc(state);
+ }
+ return 0;
+
+ case SNDCTL_DSP_SETDUPLEX:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SETDUPLEX\n");
+#endif
+ return -EINVAL;
+
+ case SNDCTL_DSP_GETODELAY:
+ if (!(file->f_mode & FMODE_WRITE))
+ return -EINVAL;
+ spin_lock_irqsave(&state->card->lock, flags);
+ i810_update_ptr(state);
+ val = dmabuf->count;
+ spin_unlock_irqrestore(&state->card->lock, flags);
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETODELAY %d\n", dmabuf->count);
+#endif
+ return put_user(val, p);
+
+ case SOUND_PCM_READ_RATE:
+#ifdef DEBUG
+ printk("SOUND_PCM_READ_RATE %d\n", dmabuf->rate);
+#endif
+ return put_user(dmabuf->rate, p);
+
+ case SOUND_PCM_READ_CHANNELS:
+#ifdef DEBUG
+ printk("SOUND_PCM_READ_CHANNELS\n");
+#endif
+ return put_user(2, p);
+
+ case SOUND_PCM_READ_BITS:
+#ifdef DEBUG
+ printk("SOUND_PCM_READ_BITS\n");
+#endif
+ return put_user(AFMT_S16_LE, p);
+
+ case SNDCTL_DSP_SETSPDIF: /* Set S/PDIF Control register */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_SETSPDIF\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+
+ /* Check to make sure the codec supports S/PDIF transmitter */
+
+ if((state->card->ac97_features & 4)) {
+ /* mask out the transmitter speed bits so the user can't set them */
+ val &= ~0x3000;
+
+ /* Add the current transmitter speed bits to the passed value */
+ ret = i810_ac97_get(codec, AC97_SPDIF_CONTROL);
+ val |= (ret & 0x3000);
+
+ i810_ac97_set(codec, AC97_SPDIF_CONTROL, val);
+ if(i810_ac97_get(codec, AC97_SPDIF_CONTROL) != val ) {
+ printk(KERN_ERR "i810_audio: Unable to set S/PDIF configuration to 0x%04x.\n", val);
+ return -EFAULT;
+ }
+ }
+#ifdef DEBUG
+ else
+ printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n");
+#endif
+ return put_user(val, p);
+
+ case SNDCTL_DSP_GETSPDIF: /* Get S/PDIF Control register */
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETSPDIF\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+
+ /* Check to make sure the codec supports S/PDIF transmitter */
+
+ if(!(state->card->ac97_features & 4)) {
+#ifdef DEBUG
+ printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n");
+#endif
+ val = 0;
+ } else {
+ val = i810_ac97_get(codec, AC97_SPDIF_CONTROL);
+ }
+ //return put_user((val & 0xcfff), p);
+ return put_user(val, p);
+
+ case SNDCTL_DSP_GETCHANNELMASK:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_GETCHANNELMASK\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+
+ /* Based on AC'97 DAC support, not ICH hardware */
+ val = DSP_BIND_FRONT;
+ if ( state->card->ac97_features & 0x0004 )
+ val |= DSP_BIND_SPDIF;
+
+ if ( state->card->ac97_features & 0x0080 )
+ val |= DSP_BIND_SURR;
+ if ( state->card->ac97_features & 0x0140 )
+ val |= DSP_BIND_CENTER_LFE;
+
+ return put_user(val, p);
+
+ case SNDCTL_DSP_BIND_CHANNEL:
+#ifdef DEBUG
+ printk("SNDCTL_DSP_BIND_CHANNEL\n");
+#endif
+ if (get_user(val, p))
+ return -EFAULT;
+ if ( val == DSP_BIND_QUERY ) {
+ val = DSP_BIND_FRONT; /* Always report this as being enabled */
+ if ( state->card->ac97_status & SPDIF_ON )
+ val |= DSP_BIND_SPDIF;
+ else {
+ if ( state->card->ac97_status & SURR_ON )
+ val |= DSP_BIND_SURR;
+ if ( state->card->ac97_status & CENTER_LFE_ON )
+ val |= DSP_BIND_CENTER_LFE;
+ }
+ } else { /* Not a query, set it */
+ if (!(file->f_mode & FMODE_WRITE))
+ return -EINVAL;
+ if ( dmabuf->enable == DAC_RUNNING ) {
+ stop_dac(state);
+ }
+ if ( val & DSP_BIND_SPDIF ) { /* Turn on SPDIF */
+ /* Ok, this should probably define what slots
+ * to use. For now, we'll only set it to the
+ * defaults:
+ *
+ * non multichannel codec maps to slots 3&4
+ * 2 channel codec maps to slots 7&8
+ * 4 channel codec maps to slots 6&9
+ * 6 channel codec maps to slots 10&11
+ *
+ * there should be some way for the app to
+ * select the slot assignment.
+ */
+
+ i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, dmabuf->rate );
+ if ( !(state->card->ac97_status & SPDIF_ON) )
+ val &= ~DSP_BIND_SPDIF;
+ } else {
+ int mask;
+ int channels;
+
+ /* Turn off S/PDIF if it was on */
+ if ( state->card->ac97_status & SPDIF_ON )
+ i810_set_spdif_output ( state, -1, 0 );
+
+ mask = val & (DSP_BIND_FRONT | DSP_BIND_SURR | DSP_BIND_CENTER_LFE);
+ switch (mask) {
+ case DSP_BIND_FRONT:
+ channels = 2;
+ break;
+ case DSP_BIND_FRONT|DSP_BIND_SURR:
+ channels = 4;
+ break;
+ case DSP_BIND_FRONT|DSP_BIND_SURR|DSP_BIND_CENTER_LFE:
+ channels = 6;
+ break;
+ default:
+ val = DSP_BIND_FRONT;
+ channels = 2;
+ break;
+ }
+ i810_set_dac_channels ( state, channels );
+
+ /* check that they really got turned on */
+ if (!(state->card->ac97_status & SURR_ON))
+ val &= ~DSP_BIND_SURR;
+ if (!(state->card->ac97_status & CENTER_LFE_ON))
+ val &= ~DSP_BIND_CENTER_LFE;
+ }
+ }
+ return put_user(val, p);
+
+ case SNDCTL_DSP_MAPINBUF:
+ case SNDCTL_DSP_MAPOUTBUF:
+ case SNDCTL_DSP_SETSYNCRO:
+ case SOUND_PCM_WRITE_FILTER:
+ case SOUND_PCM_READ_FILTER:
+#ifdef DEBUG
+ printk("SNDCTL_* -EINVAL\n");
+#endif
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int i810_open(struct inode *inode, struct file *file)
+{
+ int i = 0;
+ struct i810_card *card = devs;
+ struct i810_state *state = NULL;
+ struct dmabuf *dmabuf = NULL;
+
+ /* find an avaiable virtual channel (instance of /dev/dsp) */
+ while (card != NULL) {
+ /*
+ * If we are initializing and then fail, card could go
+ * away unuexpectedly while we are in the for() loop.
+ * So, check for card on each iteration before we check
+ * for card->initializing to avoid a possible oops.
+ * This usually only matters for times when the driver is
+ * autoloaded by kmod.
+ */
+ for (i = 0; i < 50 && card && card->initializing; i++) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/20);
+ }
+ for (i = 0; i < NR_HW_CH && card && !card->initializing; i++) {
+ if (card->states[i] == NULL) {
+ state = card->states[i] = (struct i810_state *)
+ kmalloc(sizeof(struct i810_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+ memset(state, 0, sizeof(struct i810_state));
+ dmabuf = &state->dmabuf;
+ goto found_virt;
+ }
+ }
+ card = card->next;
+ }
+ /* no more virtual channel avaiable */
+ if (!state)
+ return -ENODEV;
+
+found_virt:
+ /* initialize the virtual channel */
+ state->virt = i;
+ state->card = card;
+ state->magic = I810_STATE_MAGIC;
+ init_waitqueue_head(&dmabuf->wait);
+ init_MUTEX(&state->open_sem);
+ file->private_data = state;
+ dmabuf->trigger = 0;
+
+ /* allocate hardware channels */
+ if(file->f_mode & FMODE_READ) {
+ if((dmabuf->read_channel = card->alloc_rec_pcm_channel(card)) == NULL) {
+ kfree (card->states[i]);
+ card->states[i] = NULL;
+ return -EBUSY;
+ }
+ dmabuf->trigger |= PCM_ENABLE_INPUT;
+ i810_set_adc_rate(state, 8000);
+ }
+ if(file->f_mode & FMODE_WRITE) {
+ if((dmabuf->write_channel = card->alloc_pcm_channel(card)) == NULL) {
+ /* make sure we free the record channel allocated above */
+ if(file->f_mode & FMODE_READ)
+ card->free_pcm_channel(card,dmabuf->read_channel->num);
+ kfree (card->states[i]);
+ card->states[i] = NULL;
+ return -EBUSY;
+ }
+ /* Initialize to 8kHz? What if we don't support 8kHz? */
+ /* Let's change this to check for S/PDIF stuff */
+
+ dmabuf->trigger |= PCM_ENABLE_OUTPUT;
+ if ( spdif_locked ) {
+ i810_set_dac_rate(state, spdif_locked);
+ i810_set_spdif_output(state, AC97_EA_SPSA_3_4, spdif_locked);
+ } else {
+ i810_set_dac_rate(state, 8000);
+ /* Put the ACLink in 2 channel mode by default */
+ i = I810_IOREADL(card, GLOB_CNT);
+ I810_IOWRITEL(i & 0xffcfffff, card, GLOB_CNT);
+ }
+ }
+
+ /* set default sample format. According to OSS Programmer's Guide /dev/dsp
+ should be default to unsigned 8-bits, mono, with sample rate 8kHz and
+ /dev/dspW will accept 16-bits sample, but we don't support those so we
+ set it immediately to stereo and 16bit, which is all we do support */
+ dmabuf->fmt |= I810_FMT_16BIT | I810_FMT_STEREO;
+ dmabuf->ossfragsize = 0;
+ dmabuf->ossmaxfrags = 0;
+ dmabuf->subdivision = 0;
+
+ state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
+
+ return nonseekable_open(inode, file);
+}
+
+static int i810_release(struct inode *inode, struct file *file)
+{
+ struct i810_state *state = (struct i810_state *)file->private_data;
+ struct i810_card *card = state->card;
+ struct dmabuf *dmabuf = &state->dmabuf;
+ unsigned long flags;
+
+ lock_kernel();
+
+ /* stop DMA state machine and free DMA buffers/channels */
+ if(dmabuf->trigger & PCM_ENABLE_OUTPUT) {
+ drain_dac(state, 0);
+ }
+ if(dmabuf->trigger & PCM_ENABLE_INPUT) {
+ stop_adc(state);
+ }
+ spin_lock_irqsave(&card->lock, flags);
+ dealloc_dmabuf(state);
+ if (file->f_mode & FMODE_WRITE) {
+ state->card->free_pcm_channel(state->card, dmabuf->write_channel->num);
+ }
+ if (file->f_mode & FMODE_READ) {
+ state->card->free_pcm_channel(state->card, dmabuf->read_channel->num);
+ }
+
+ state->card->states[state->virt] = NULL;
+ kfree(state);
+ spin_unlock_irqrestore(&card->lock, flags);
+ unlock_kernel();
+
+ return 0;
+}
+
+static /*const*/ struct file_operations i810_audio_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = i810_read,
+ .write = i810_write,
+ .poll = i810_poll,
+ .ioctl = i810_ioctl,
+ .mmap = i810_mmap,
+ .open = i810_open,
+ .release = i810_release,
+};
+
+/* Write AC97 codec registers */
+
+static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg)
+{
+ struct i810_card *card = dev->private_data;
+ int count = 100;
+ u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
+
+ while(count-- && (readb(card->iobase_mmio + CAS) & 1))
+ udelay(1);
+
+#ifdef DEBUG_MMIO
+ {
+ u16 ans = readw(card->ac97base_mmio + reg_set);
+ printk(KERN_DEBUG "i810_audio: ac97_get_mmio(%d) -> 0x%04X\n", ((int) reg_set) & 0xffff, (u32) ans);
+ return ans;
+ }
+#else
+ return readw(card->ac97base_mmio + reg_set);
+#endif
+}
+
+static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg)
+{
+ struct i810_card *card = dev->private_data;
+ int count = 100;
+ u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
+
+ while(count-- && (I810_IOREADB(card, CAS) & 1))
+ udelay(1);
+
+ return inw(card->ac97base + reg_set);
+}
+
+static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data)
+{
+ struct i810_card *card = dev->private_data;
+ int count = 100;
+ u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
+
+ while(count-- && (readb(card->iobase_mmio + CAS) & 1))
+ udelay(1);
+
+ writew(data, card->ac97base_mmio + reg_set);
+
+#ifdef DEBUG_MMIO
+ printk(KERN_DEBUG "i810_audio: ac97_set_mmio(0x%04X, %d)\n", (u32) data, ((int) reg_set) & 0xffff);
+#endif
+}
+
+static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data)
+{
+ struct i810_card *card = dev->private_data;
+ int count = 100;
+ u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
+
+ while(count-- && (I810_IOREADB(card, CAS) & 1))
+ udelay(1);
+
+ outw(data, card->ac97base + reg_set);
+}
+
+static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg)
+{
+ struct i810_card *card = dev->private_data;
+ u16 ret;
+
+ spin_lock(&card->ac97_lock);
+ if (card->use_mmio) {
+ ret = i810_ac97_get_mmio(dev, reg);
+ }
+ else {
+ ret = i810_ac97_get_io(dev, reg);
+ }
+ spin_unlock(&card->ac97_lock);
+
+ return ret;
+}
+
+static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data)
+{
+ struct i810_card *card = dev->private_data;
+
+ spin_lock(&card->ac97_lock);
+ if (card->use_mmio) {
+ i810_ac97_set_mmio(dev, reg, data);
+ }
+ else {
+ i810_ac97_set_io(dev, reg, data);
+ }
+ spin_unlock(&card->ac97_lock);
+}
+
+
+/* OSS /dev/mixer file operation methods */
+
+static int i810_open_mixdev(struct inode *inode, struct file *file)
+{
+ int i;
+ int minor = iminor(inode);
+ struct i810_card *card = devs;
+
+ for (card = devs; card != NULL; card = card->next) {
+ /*
+ * If we are initializing and then fail, card could go
+ * away unuexpectedly while we are in the for() loop.
+ * So, check for card on each iteration before we check
+ * for card->initializing to avoid a possible oops.
+ * This usually only matters for times when the driver is
+ * autoloaded by kmod.
+ */
+ for (i = 0; i < 50 && card && card->initializing; i++) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/20);
+ }
+ for (i = 0; i < NR_AC97 && card && !card->initializing; i++)
+ if (card->ac97_codec[i] != NULL &&
+ card->ac97_codec[i]->dev_mixer == minor) {
+ file->private_data = card->ac97_codec[i];
+ return nonseekable_open(inode, file);
+ }
+ }
+ return -ENODEV;
+}
+
+static int i810_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct ac97_codec *codec = (struct ac97_codec *)file->private_data;
+
+ return codec->mixer_ioctl(codec, cmd, arg);
+}
+
+static /*const*/ struct file_operations i810_mixer_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .ioctl = i810_ioctl_mixdev,
+ .open = i810_open_mixdev,
+};
+
+/* AC97 codec initialisation. These small functions exist so we don't
+ duplicate code between module init and apm resume */
+
+static inline int i810_ac97_exists(struct i810_card *card, int ac97_number)
+{
+ u32 reg = I810_IOREADL(card, GLOB_STA);
+ switch (ac97_number) {
+ case 0:
+ return reg & (1<<8);
+ case 1:
+ return reg & (1<<9);
+ case 2:
+ return reg & (1<<28);
+ }
+ return 0;
+}
+
+static inline int i810_ac97_enable_variable_rate(struct ac97_codec *codec)
+{
+ i810_ac97_set(codec, AC97_EXTENDED_STATUS, 9);
+ i810_ac97_set(codec,AC97_EXTENDED_STATUS,
+ i810_ac97_get(codec, AC97_EXTENDED_STATUS)|0xE800);
+
+ return (i810_ac97_get(codec, AC97_EXTENDED_STATUS)&1);
+}
+
+
+static int i810_ac97_probe_and_powerup(struct i810_card *card,struct ac97_codec *codec)
+{
+ /* Returns 0 on failure */
+ int i;
+
+ if (ac97_probe_codec(codec) == 0) return 0;
+
+ /* power it all up */
+ i810_ac97_set(codec, AC97_POWER_CONTROL,
+ i810_ac97_get(codec, AC97_POWER_CONTROL) & ~0x7f00);
+
+ /* wait for analog ready */
+ for (i=100; i && ((i810_ac97_get(codec, AC97_POWER_CONTROL) & 0xf) != 0xf); i--)
+ {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/20);
+ }
+ return i;
+}
+
+static int is_new_ich(u16 pci_id)
+{
+ switch (pci_id) {
+ case PCI_DEVICE_ID_INTEL_82801DB_5:
+ case PCI_DEVICE_ID_INTEL_82801EB_5:
+ case PCI_DEVICE_ID_INTEL_ESB_5:
+ case PCI_DEVICE_ID_INTEL_ICH6_18:
+ return 1;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static inline int ich_use_mmio(struct i810_card *card)
+{
+ return is_new_ich(card->pci_id) && card->use_mmio;
+}
+
+/**
+ * i810_ac97_power_up_bus - bring up AC97 link
+ * @card : ICH audio device to power up
+ *
+ * Bring up the ACLink AC97 codec bus
+ */
+
+static int i810_ac97_power_up_bus(struct i810_card *card)
+{
+ u32 reg = I810_IOREADL(card, GLOB_CNT);
+ int i;
+ int primary_codec_id = 0;
+
+ if((reg&2)==0) /* Cold required */
+ reg|=2;
+ else
+ reg|=4; /* Warm */
+
+ reg&=~8; /* ACLink on */
+
+ /* At this point we deassert AC_RESET # */
+ I810_IOWRITEL(reg , card, GLOB_CNT);
+
+ /* We must now allow time for the Codec initialisation.
+ 600mS is the specified time */
+
+ for(i=0;i<10;i++)
+ {
+ if((I810_IOREADL(card, GLOB_CNT)&4)==0)
+ break;
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/20);
+ }
+ if(i==10)
+ {
+ printk(KERN_ERR "i810_audio: AC'97 reset failed.\n");
+ return 0;
+ }
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ/2);
+
+ /*
+ * See if the primary codec comes ready. This must happen
+ * before we start doing DMA stuff
+ */
+ /* see i810_ac97_init for the next 10 lines (jsaw) */
+ if (card->use_mmio)
+ readw(card->ac97base_mmio);
+ else
+ inw(card->ac97base);
+ if (ich_use_mmio(card)) {
+ primary_codec_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
+ printk(KERN_INFO "i810_audio: Primary codec has ID %d\n",
+ primary_codec_id);
+ }
+
+ if(! i810_ac97_exists(card, primary_codec_id))
+ {
+ printk(KERN_INFO "i810_audio: Codec not ready.. wait.. ");
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ); /* actually 600mS by the spec */
+
+ if(i810_ac97_exists(card, primary_codec_id))
+ printk("OK\n");
+ else
+ printk("no response.\n");
+ }
+ if (card->use_mmio)
+ readw(card->ac97base_mmio);
+ else
+ inw(card->ac97base);
+ return 1;
+}
+
+static int __devinit i810_ac97_init(struct i810_card *card)
+{
+ int num_ac97 = 0;
+ int ac97_id;
+ int total_channels = 0;
+ int nr_ac97_max = card_cap[card->pci_id_internal].nr_ac97;
+ struct ac97_codec *codec;
+ u16 eid;
+ u32 reg;
+
+ if(!i810_ac97_power_up_bus(card)) return 0;
+
+ /* Number of channels supported */
+ /* What about the codec? Just because the ICH supports */
+ /* multiple channels doesn't mean the codec does. */
+ /* we'll have to modify this in the codec section below */
+ /* to reflect what the codec has. */
+ /* ICH and ICH0 only support 2 channels so don't bother */
+ /* to check.... */
+
+ card->channels = 2;
+ reg = I810_IOREADL(card, GLOB_STA);
+ if ( reg & 0x0200000 )
+ card->channels = 6;
+ else if ( reg & 0x0100000 )
+ card->channels = 4;
+ printk(KERN_INFO "i810_audio: Audio Controller supports %d channels.\n", card->channels);
+ printk(KERN_INFO "i810_audio: Defaulting to base 2 channel mode.\n");
+ reg = I810_IOREADL(card, GLOB_CNT);
+ I810_IOWRITEL(reg & 0xffcfffff, card, GLOB_CNT);
+
+ for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++)
+ card->ac97_codec[num_ac97] = NULL;
+
+ /*@FIXME I don't know, if I'm playing to safe here... (jsaw) */
+ if ((nr_ac97_max > 2) && !card->use_mmio) nr_ac97_max = 2;
+
+ for (num_ac97 = 0; num_ac97 < nr_ac97_max; num_ac97++) {
+ /* codec reset */
+ printk(KERN_INFO "i810_audio: Resetting connection %d\n", num_ac97);
+ if (card->use_mmio)
+ readw(card->ac97base_mmio + 0x80*num_ac97);
+ else
+ inw(card->ac97base + 0x80*num_ac97);
+
+ /* If we have the SDATA_IN Map Register, as on ICH4, we
+ do not loop thru all possible codec IDs but thru all
+ possible IO channels. Bit 0:1 of SDM then holds the
+ last codec ID spoken to.
+ */
+ if (ich_use_mmio(card)) {
+ ac97_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
+ printk(KERN_INFO "i810_audio: Connection %d with codec id %d\n",
+ num_ac97, ac97_id);
+ }
+ else {
+ ac97_id = num_ac97;
+ }
+
+ /* The ICH programmer's reference says you should */
+ /* check the ready status before probing. So we chk */
+ /* What do we do if it's not ready? Wait and try */
+ /* again, or abort? */
+ if (!i810_ac97_exists(card, ac97_id)) {
+ if(num_ac97 == 0)
+ printk(KERN_ERR "i810_audio: Primary codec not ready.\n");
+ }
+
+ if ((codec = ac97_alloc_codec()) == NULL)
+ return -ENOMEM;
+
+ /* initialize some basic codec information, other fields will be filled
+ in ac97_probe_codec */
+ codec->private_data = card;
+ codec->id = ac97_id;
+ card->ac97_id_map[ac97_id] = num_ac97 * 0x80;
+
+ if (card->use_mmio) {
+ codec->codec_read = i810_ac97_get_mmio;
+ codec->codec_write = i810_ac97_set_mmio;
+ }
+ else {
+ codec->codec_read = i810_ac97_get_io;
+ codec->codec_write = i810_ac97_set_io;
+ }
+
+ if(!i810_ac97_probe_and_powerup(card,codec)) {
+ printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", ac97_id);
+ ac97_release_codec(codec);
+ break; /* it didn't work */
+ }
+ /* Store state information about S/PDIF transmitter */
+ card->ac97_status = 0;
+
+ /* Don't attempt to get eid until powerup is complete */
+ eid = i810_ac97_get(codec, AC97_EXTENDED_ID);
+
+ if(eid==0xFFFF)
+ {
+ printk(KERN_WARNING "i810_audio: no codec attached ?\n");
+ ac97_release_codec(codec);
+ break;
+ }
+
+ /* Check for an AC97 1.0 soft modem (ID1) */
+
+ if(codec->modem)
+ {
+ printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", ac97_id);
+ ac97_release_codec(codec);
+ continue;
+ }
+
+ card->ac97_features = eid;
+
+ /* Now check the codec for useful features to make up for
+ the dumbness of the 810 hardware engine */
+
+ if(!(eid&0x0001))
+ printk(KERN_WARNING "i810_audio: only 48Khz playback available.\n");
+ else
+ {
+ if(!i810_ac97_enable_variable_rate(codec)) {
+ printk(KERN_WARNING "i810_audio: Codec refused to allow VRA, using 48Khz only.\n");
+ card->ac97_features&=~1;
+ }
+ }
+
+ /* Turn on the amplifier */
+
+ codec->codec_write(codec, AC97_POWER_CONTROL,
+ codec->codec_read(codec, AC97_POWER_CONTROL) & ~0x8000);
+
+ /* Determine how many channels the codec(s) support */
+ /* - The primary codec always supports 2 */
+ /* - If the codec supports AMAP, surround DACs will */
+ /* automaticlly get assigned to slots. */
+ /* * Check for surround DACs and increment if */
+ /* found. */
+ /* - Else check if the codec is revision 2.2 */
+ /* * If surround DACs exist, assign them to slots */
+ /* and increment channel count. */
+
+ /* All of this only applies to ICH2 and above. ICH */
+ /* and ICH0 only support 2 channels. ICH2 will only */
+ /* support multiple codecs in a "split audio" config. */
+ /* as described above. */
+
+ /* TODO: Remove all the debugging messages! */
+
+ if((eid & 0xc000) == 0) /* primary codec */
+ total_channels += 2;
+
+ if(eid & 0x200) { /* GOOD, AMAP support */
+ if (eid & 0x0080) /* L/R Surround channels */
+ total_channels += 2;
+ if (eid & 0x0140) /* LFE and Center channels */
+ total_channels += 2;
+ printk("i810_audio: AC'97 codec %d supports AMAP, total channels = %d\n", ac97_id, total_channels);
+ } else if (eid & 0x0400) { /* this only works on 2.2 compliant codecs */
+ eid &= 0xffcf;
+ if((eid & 0xc000) != 0) {
+ switch ( total_channels ) {
+ case 2:
+ /* Set dsa1, dsa0 to 01 */
+ eid |= 0x0010;
+ break;
+ case 4:
+ /* Set dsa1, dsa0 to 10 */
+ eid |= 0x0020;
+ break;
+ case 6:
+ /* Set dsa1, dsa0 to 11 */
+ eid |= 0x0030;
+ break;
+ }
+ total_channels += 2;
+ }
+ i810_ac97_set(codec, AC97_EXTENDED_ID, eid);
+ eid = i810_ac97_get(codec, AC97_EXTENDED_ID);
+ printk("i810_audio: AC'97 codec %d, new EID value = 0x%04x\n", ac97_id, eid);
+ if (eid & 0x0080) /* L/R Surround channels */
+ total_channels += 2;
+ if (eid & 0x0140) /* LFE and Center channels */
+ total_channels += 2;
+ printk("i810_audio: AC'97 codec %d, DAC map configured, total channels = %d\n", ac97_id, total_channels);
+ } else {
+ printk("i810_audio: AC'97 codec %d Unable to map surround DAC's (or DAC's not present), total channels = %d\n", ac97_id, total_channels);
+ }
+
+ if ((codec->dev_mixer = register_sound_mixer(&i810_mixer_fops, -1)) < 0) {
+ printk(KERN_ERR "i810_audio: couldn't register mixer!\n");
+ ac97_release_codec(codec);
+ break;
+ }
+
+ card->ac97_codec[num_ac97] = codec;
+ }
+
+ /* tune up the primary codec */
+ ac97_tune_hardware(card->pci_dev, ac97_quirks, ac97_quirk);
+
+ /* pick the minimum of channels supported by ICHx or codec(s) */
+ card->channels = (card->channels > total_channels)?total_channels:card->channels;
+
+ return num_ac97;
+}
+
+static void __devinit i810_configure_clocking (void)
+{
+ struct i810_card *card;
+ struct i810_state *state;
+ struct dmabuf *dmabuf;
+ unsigned int i, offset, new_offset;
+ unsigned long flags;
+
+ card = devs;
+ /* We could try to set the clocking for multiple cards, but can you even have
+ * more than one i810 in a machine? Besides, clocking is global, so unless
+ * someone actually thinks more than one i810 in a machine is possible and
+ * decides to rewrite that little bit, setting the rate for more than one card
+ * is a waste of time.
+ */
+ if(card != NULL) {
+ state = card->states[0] = (struct i810_state *)
+ kmalloc(sizeof(struct i810_state), GFP_KERNEL);
+ if (state == NULL)
+ return;
+ memset(state, 0, sizeof(struct i810_state));
+ dmabuf = &state->dmabuf;
+
+ dmabuf->write_channel = card->alloc_pcm_channel(card);
+ state->virt = 0;
+ state->card = card;
+ state->magic = I810_STATE_MAGIC;
+ init_waitqueue_head(&dmabuf->wait);
+ init_MUTEX(&state->open_sem);
+ dmabuf->fmt = I810_FMT_STEREO | I810_FMT_16BIT;
+ dmabuf->trigger = PCM_ENABLE_OUTPUT;
+ i810_set_spdif_output(state, -1, 0);
+ i810_set_dac_channels(state, 2);
+ i810_set_dac_rate(state, 48000);
+ if(prog_dmabuf(state, 0) != 0) {
+ goto config_out_nodmabuf;
+ }
+ if(dmabuf->dmasize < 16384) {
+ goto config_out;
+ }
+ dmabuf->count = dmabuf->dmasize;
+ CIV_TO_LVI(card, dmabuf->write_channel->port, -1);
+ local_irq_save(flags);
+ start_dac(state);
+ offset = i810_get_dma_addr(state, 0);
+ mdelay(50);
+ new_offset = i810_get_dma_addr(state, 0);
+ stop_dac(state);
+ local_irq_restore(flags);
+ i = new_offset - offset;
+#ifdef DEBUG_INTERRUPTS
+ printk("i810_audio: %d bytes in 50 milliseconds\n", i);
+#endif
+ if(i == 0)
+ goto config_out;
+ i = i / 4 * 20;
+ if (i > 48500 || i < 47500) {
+ clocking = clocking * clocking / i;
+ printk("i810_audio: setting clocking to %d\n", clocking);
+ }
+config_out:
+ dealloc_dmabuf(state);
+config_out_nodmabuf:
+ state->card->free_pcm_channel(state->card,state->dmabuf.write_channel->num);
+ kfree(state);
+ card->states[0] = NULL;
+ }
+}
+
+/* install the driver, we do not allocate hardware channel nor DMA buffer now, they are defered
+ until "ACCESS" time (in prog_dmabuf called by open/read/write/ioctl/mmap) */
+
+static int __devinit i810_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_id)
+{
+ struct i810_card *card;
+
+ if (pci_enable_device(pci_dev))
+ return -EIO;
+
+ if (pci_set_dma_mask(pci_dev, I810_DMA_MASK)) {
+ printk(KERN_ERR "i810_audio: architecture does not support"
+ " 32bit PCI busmaster DMA\n");
+ return -ENODEV;
+ }
+
+ if ((card = kmalloc(sizeof(struct i810_card), GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "i810_audio: out of memory\n");
+ return -ENOMEM;
+ }
+ memset(card, 0, sizeof(*card));
+
+ card->initializing = 1;
+ card->pci_dev = pci_dev;
+ card->pci_id = pci_id->device;
+ card->ac97base = pci_resource_start (pci_dev, 0);
+ card->iobase = pci_resource_start (pci_dev, 1);
+
+ if (!(card->ac97base) || !(card->iobase)) {
+ card->ac97base = 0;
+ card->iobase = 0;
+ }
+
+ /* if chipset could have mmio capability, check it */
+ if (card_cap[pci_id->driver_data].flags & CAP_MMIO) {
+ card->ac97base_mmio_phys = pci_resource_start (pci_dev, 2);
+ card->iobase_mmio_phys = pci_resource_start (pci_dev, 3);
+
+ if ((card->ac97base_mmio_phys) && (card->iobase_mmio_phys)) {
+ card->use_mmio = 1;
+ }
+ else {
+ card->ac97base_mmio_phys = 0;
+ card->iobase_mmio_phys = 0;
+ }
+ }
+
+ if (!(card->use_mmio) && (!(card->iobase) || !(card->ac97base))) {
+ printk(KERN_ERR "i810_audio: No I/O resources available.\n");
+ goto out_mem;
+ }
+
+ card->irq = pci_dev->irq;
+ card->next = devs;
+ card->magic = I810_CARD_MAGIC;
+#ifdef CONFIG_PM
+ card->pm_suspended=0;
+#endif
+ spin_lock_init(&card->lock);
+ spin_lock_init(&card->ac97_lock);
+ devs = card;
+
+ pci_set_master(pci_dev);
+
+ printk(KERN_INFO "i810: %s found at IO 0x%04lx and 0x%04lx, "
+ "MEM 0x%04lx and 0x%04lx, IRQ %d\n",
+ card_names[pci_id->driver_data],
+ card->iobase, card->ac97base,
+ card->ac97base_mmio_phys, card->iobase_mmio_phys,
+ card->irq);
+
+ card->alloc_pcm_channel = i810_alloc_pcm_channel;
+ card->alloc_rec_pcm_channel = i810_alloc_rec_pcm_channel;
+ card->alloc_rec_mic_channel = i810_alloc_rec_mic_channel;
+ card->free_pcm_channel = i810_free_pcm_channel;
+
+ if ((card->channel = pci_alloc_consistent(pci_dev,
+ sizeof(struct i810_channel)*NR_HW_CH, &card->chandma)) == NULL) {
+ printk(KERN_ERR "i810: cannot allocate channel DMA memory\n");
+ goto out_mem;
+ }
+
+ { /* We may dispose of this altogether some time soon, so... */
+ struct i810_channel *cp = card->channel;
+
+ cp[0].offset = 0;
+ cp[0].port = 0x00;
+ cp[0].num = 0;
+ cp[1].offset = 0;
+ cp[1].port = 0x10;
+ cp[1].num = 1;
+ cp[2].offset = 0;
+ cp[2].port = 0x20;
+ cp[2].num = 2;
+ }
+
+ /* claim our iospace and irq */
+ if (!request_region(card->iobase, 64, card_names[pci_id->driver_data])) {
+ printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->iobase);
+ goto out_region1;
+ }
+ if (!request_region(card->ac97base, 256, card_names[pci_id->driver_data])) {
+ printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->ac97base);
+ goto out_region2;
+ }
+
+ if (request_irq(card->irq, &i810_interrupt, SA_SHIRQ,
+ card_names[pci_id->driver_data], card)) {
+ printk(KERN_ERR "i810_audio: unable to allocate irq %d\n", card->irq);
+ goto out_pio;
+ }
+
+ if (card->use_mmio) {
+ if (request_mem_region(card->ac97base_mmio_phys, 512, "ich_audio MMBAR")) {
+ if ((card->ac97base_mmio = ioremap(card->ac97base_mmio_phys, 512))) { /*@FIXME can ioremap fail? don't know (jsaw) */
+ if (request_mem_region(card->iobase_mmio_phys, 256, "ich_audio MBBAR")) {
+ if ((card->iobase_mmio = ioremap(card->iobase_mmio_phys, 256))) {
+ printk(KERN_INFO "i810: %s mmio at 0x%04lx and 0x%04lx\n",
+ card_names[pci_id->driver_data],
+ (unsigned long) card->ac97base_mmio,
+ (unsigned long) card->iobase_mmio);
+ }
+ else {
+ iounmap(card->ac97base_mmio);
+ release_mem_region(card->ac97base_mmio_phys, 512);
+ release_mem_region(card->iobase_mmio_phys, 512);
+ card->use_mmio = 0;
+ }
+ }
+ else {
+ iounmap(card->ac97base_mmio);
+ release_mem_region(card->ac97base_mmio_phys, 512);
+ card->use_mmio = 0;
+ }
+ }
+ }
+ else {
+ card->use_mmio = 0;
+ }
+ }
+
+ /* initialize AC97 codec and register /dev/mixer */
+ if (i810_ac97_init(card) <= 0) {
+ free_irq(card->irq, card);
+ goto out_iospace;
+ }
+ pci_set_drvdata(pci_dev, card);
+
+ if(clocking == 0) {
+ clocking = 48000;
+ i810_configure_clocking();
+ }
+
+ /* register /dev/dsp */
+ if ((card->dev_audio = register_sound_dsp(&i810_audio_fops, -1)) < 0) {
+ int i;
+ printk(KERN_ERR "i810_audio: couldn't register DSP device!\n");
+ free_irq(card->irq, card);
+ for (i = 0; i < NR_AC97; i++)
+ if (card->ac97_codec[i] != NULL) {
+ unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
+ ac97_release_codec(card->ac97_codec[i]);
+ }
+ goto out_iospace;
+ }
+
+ card->initializing = 0;
+ return 0;
+
+out_iospace:
+ if (card->use_mmio) {
+ iounmap(card->ac97base_mmio);
+ iounmap(card->iobase_mmio);
+ release_mem_region(card->ac97base_mmio_phys, 512);
+ release_mem_region(card->iobase_mmio_phys, 256);
+ }
+out_pio:
+ release_region(card->iobase, 64);
+out_region2:
+ release_region(card->ac97base, 256);
+out_region1:
+ pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
+ card->channel, card->chandma);
+out_mem:
+ kfree(card);
+ return -ENODEV;
+}
+
+static void __devexit i810_remove(struct pci_dev *pci_dev)
+{
+ int i;
+ struct i810_card *card = pci_get_drvdata(pci_dev);
+ /* free hardware resources */
+ free_irq(card->irq, devs);
+ release_region(card->iobase, 64);
+ release_region(card->ac97base, 256);
+ pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
+ card->channel, card->chandma);
+ if (card->use_mmio) {
+ iounmap(card->ac97base_mmio);
+ iounmap(card->iobase_mmio);
+ release_mem_region(card->ac97base_mmio_phys, 512);
+ release_mem_region(card->iobase_mmio_phys, 256);
+ }
+
+ /* unregister audio devices */
+ for (i = 0; i < NR_AC97; i++)
+ if (card->ac97_codec[i] != NULL) {
+ unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
+ ac97_release_codec(card->ac97_codec[i]);
+ card->ac97_codec[i] = NULL;
+ }
+ unregister_sound_dsp(card->dev_audio);
+ kfree(card);
+}
+
+#ifdef CONFIG_PM
+static int i810_pm_suspend(struct pci_dev *dev, pm_message_t pm_state)
+{
+ struct i810_card *card = pci_get_drvdata(dev);
+ struct i810_state *state;
+ unsigned long flags;
+ struct dmabuf *dmabuf;
+ int i,num_ac97;
+#ifdef DEBUG
+ printk("i810_audio: i810_pm_suspend called\n");
+#endif
+ if(!card) return 0;
+ spin_lock_irqsave(&card->lock, flags);
+ card->pm_suspended=1;
+ for(i=0;i<NR_HW_CH;i++) {
+ state = card->states[i];
+ if(!state) continue;
+ /* this happens only if there are open files */
+ dmabuf = &state->dmabuf;
+ if(dmabuf->enable & DAC_RUNNING ||
+ (dmabuf->count && (dmabuf->trigger & PCM_ENABLE_OUTPUT))) {
+ state->pm_saved_dac_rate=dmabuf->rate;
+ stop_dac(state);
+ } else {
+ state->pm_saved_dac_rate=0;
+ }
+ if(dmabuf->enable & ADC_RUNNING) {
+ state->pm_saved_adc_rate=dmabuf->rate;
+ stop_adc(state);
+ } else {
+ state->pm_saved_adc_rate=0;
+ }
+ dmabuf->ready = 0;
+ dmabuf->swptr = dmabuf->hwptr = 0;
+ dmabuf->count = dmabuf->total_bytes = 0;
+ }
+
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ /* save mixer settings */
+ for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
+ struct ac97_codec *codec = card->ac97_codec[num_ac97];
+ if(!codec) continue;
+ for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) {
+ if((supported_mixer(codec,i)) &&
+ (codec->read_mixer)) {
+ card->pm_saved_mixer_settings[i][num_ac97]=
+ codec->read_mixer(codec,i);
+ }
+ }
+ }
+ pci_save_state(dev); /* XXX do we need this? */
+ pci_disable_device(dev); /* disable busmastering */
+ pci_set_power_state(dev,3); /* Zzz. */
+
+ return 0;
+}
+
+
+static int i810_pm_resume(struct pci_dev *dev)
+{
+ int num_ac97,i=0;
+ struct i810_card *card=pci_get_drvdata(dev);
+ pci_enable_device(dev);
+ pci_restore_state (dev);
+
+ /* observation of a toshiba portege 3440ct suggests that the
+ hardware has to be more or less completely reinitialized from
+ scratch after an apm suspend. Works For Me. -dan */
+
+ i810_ac97_power_up_bus(card);
+
+ for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
+ struct ac97_codec *codec = card->ac97_codec[num_ac97];
+ /* check they haven't stolen the hardware while we were
+ away */
+ if(!codec || !i810_ac97_exists(card,num_ac97)) {
+ if(num_ac97) continue;
+ else BUG();
+ }
+ if(!i810_ac97_probe_and_powerup(card,codec)) BUG();
+
+ if((card->ac97_features&0x0001)) {
+ /* at probe time we found we could do variable
+ rates, but APM suspend has made it forget
+ its magical powers */
+ if(!i810_ac97_enable_variable_rate(codec)) BUG();
+ }
+ /* we lost our mixer settings, so restore them */
+ for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) {
+ if(supported_mixer(codec,i)){
+ int val=card->
+ pm_saved_mixer_settings[i][num_ac97];
+ codec->mixer_state[i]=val;
+ codec->write_mixer(codec,i,
+ (val & 0xff) ,
+ ((val >> 8) & 0xff) );
+ }
+ }
+ }
+
+ /* we need to restore the sample rate from whatever it was */
+ for(i=0;i<NR_HW_CH;i++) {
+ struct i810_state * state=card->states[i];
+ if(state) {
+ if(state->pm_saved_adc_rate)
+ i810_set_adc_rate(state,state->pm_saved_adc_rate);
+ if(state->pm_saved_dac_rate)
+ i810_set_dac_rate(state,state->pm_saved_dac_rate);
+ }
+ }
+
+
+ card->pm_suspended = 0;
+
+ /* any processes that were reading/writing during the suspend
+ probably ended up here */
+ for(i=0;i<NR_HW_CH;i++) {
+ struct i810_state *state = card->states[i];
+ if(state) wake_up(&state->dmabuf.wait);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+MODULE_AUTHOR("The Linux kernel team");
+MODULE_DESCRIPTION("Intel 810 audio support");
+MODULE_LICENSE("GPL");
+module_param(ftsodell, int, 0444);
+module_param(clocking, uint, 0444);
+module_param(strict_clocking, int, 0444);
+module_param(spdif_locked, int, 0444);
+
+#define I810_MODULE_NAME "i810_audio"
+
+static struct pci_driver i810_pci_driver = {
+ .name = I810_MODULE_NAME,
+ .id_table = i810_pci_tbl,
+ .probe = i810_probe,
+ .remove = __devexit_p(i810_remove),
+#ifdef CONFIG_PM
+ .suspend = i810_pm_suspend,
+ .resume = i810_pm_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init i810_init_module (void)
+{
+ int retval;
+
+ printk(KERN_INFO "Intel 810 + AC97 Audio, version "
+ DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n");
+
+ retval = pci_register_driver(&i810_pci_driver);
+ if (retval)
+ return retval;
+
+ if(ftsodell != 0) {
+ printk("i810_audio: ftsodell is now a deprecated option.\n");
+ }
+ if(spdif_locked > 0 ) {
+ if(spdif_locked == 32000 || spdif_locked == 44100 || spdif_locked == 48000) {
+ printk("i810_audio: Enabling S/PDIF at sample rate %dHz.\n", spdif_locked);
+ } else {
+ printk("i810_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
+ spdif_locked = 0;
+ }
+ }
+
+ return 0;
+}
+
+static void __exit i810_cleanup_module (void)
+{
+ pci_unregister_driver(&i810_pci_driver);
+}
+
+module_init(i810_init_module);
+module_exit(i810_cleanup_module);
+
+/*
+Local Variables:
+c-basic-offset: 8
+End:
+*/