synclink_gt: add clock options
Add support for x8 asynchronous sample rate and ability to specify base
clock frequency.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 6ec6e13..5e25649 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -298,6 +298,7 @@
unsigned int rbuf_fill_level;
unsigned int if_mode;
+ unsigned int base_clock;
/* device status */
@@ -1156,22 +1157,26 @@
return -EFAULT;
spin_lock(&info->lock);
- info->params.mode = tmp_params.mode;
- info->params.loopback = tmp_params.loopback;
- info->params.flags = tmp_params.flags;
- info->params.encoding = tmp_params.encoding;
- info->params.clock_speed = tmp_params.clock_speed;
- info->params.addr_filter = tmp_params.addr_filter;
- info->params.crc_type = tmp_params.crc_type;
- info->params.preamble_length = tmp_params.preamble_length;
- info->params.preamble = tmp_params.preamble;
- info->params.data_rate = tmp_params.data_rate;
- info->params.data_bits = tmp_params.data_bits;
- info->params.stop_bits = tmp_params.stop_bits;
- info->params.parity = tmp_params.parity;
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
+ info->base_clock = tmp_params.clock_speed;
+ } else {
+ info->params.mode = tmp_params.mode;
+ info->params.loopback = tmp_params.loopback;
+ info->params.flags = tmp_params.flags;
+ info->params.encoding = tmp_params.encoding;
+ info->params.clock_speed = tmp_params.clock_speed;
+ info->params.addr_filter = tmp_params.addr_filter;
+ info->params.crc_type = tmp_params.crc_type;
+ info->params.preamble_length = tmp_params.preamble_length;
+ info->params.preamble = tmp_params.preamble;
+ info->params.data_rate = tmp_params.data_rate;
+ info->params.data_bits = tmp_params.data_bits;
+ info->params.stop_bits = tmp_params.stop_bits;
+ info->params.parity = tmp_params.parity;
+ }
spin_unlock(&info->lock);
- change_params(info);
+ program_hw(info);
return 0;
}
@@ -2559,10 +2564,13 @@
return -EFAULT;
spin_lock_irqsave(&info->lock, flags);
- memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
+ info->base_clock = tmp_params.clock_speed;
+ else
+ memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->lock, flags);
- change_params(info);
+ program_hw(info);
return 0;
}
@@ -3432,6 +3440,7 @@
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
+ info->base_clock = 14745600;
info->rbuf_fill_level = DMABUFSIZE;
info->port.close_delay = 5*HZ/10;
info->port.closing_wait = 30*HZ;
@@ -3779,7 +3788,7 @@
static void set_rate(struct slgt_info *info, u32 rate)
{
unsigned int div;
- static unsigned int osc = 14745600;
+ unsigned int osc = info->base_clock;
/* div = osc/rate - 1
*
@@ -4083,18 +4092,27 @@
* 06 CTS IRQ enable
* 05 DCD IRQ enable
* 04 RI IRQ enable
- * 03 reserved, must be zero
+ * 03 0=16x sampling, 1=8x sampling
* 02 1=txd->rxd internal loopback enable
* 01 reserved, must be zero
* 00 1=master IRQ enable
*/
val = BIT15 + BIT14 + BIT0;
+ /* JCR[8] : 1 = x8 async mode feature available */
+ if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
+ ((info->base_clock < (info->params.data_rate * 16)) ||
+ (info->base_clock % (info->params.data_rate * 16)))) {
+ /* use 8x sampling */
+ val |= BIT3;
+ set_rate(info, info->params.data_rate * 8);
+ } else {
+ /* use 16x sampling */
+ set_rate(info, info->params.data_rate * 16);
+ }
wr_reg16(info, SCR, val);
slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
- set_rate(info, info->params.data_rate * 16);
-
if (info->params.loopback)
enable_loopback(info);
}