ARM: mx2/mx27ads: fold board header in its only user
Moreover remove unused definitions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
index 6ce3236..2183e3d 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -34,7 +34,6 @@
#include <mach/gpio.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
#include <mach/imxfb.h>
@@ -42,6 +41,36 @@
#include "devices.h"
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS 0xf4300000
+#define PBC_REG_ADDR(offset) (void __force __iomem *) \
+ (PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH 0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET (1 << 3)
+
static unsigned int mx27ads_pins[] = {
/* UART0 */
PE12_PF_UART1_TXD,
@@ -342,4 +371,3 @@
.init_machine = mx27ads_board_init,
.timer = &mx27ads_timer,
MACHINE_END
-