Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
PCI: Only build PCI syscalls on architectures that want them
PCI: limit pci_get_bus_and_slot to domain 0
PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
PCI: hotplug: pciehp: wait for 1 second after power off slot
PCI: pci_set_power_state(): check for PM capabilities earlier
PCI: cpci_hotplug: Convert to use the kthread API
PCI: add pci_try_set_mwi
PCI: pcie: remove SPIN_LOCK_UNLOCKED
PCI: ROUND_UP macro cleanup in drivers/pci
PCI: remove pci_dac_dma_... APIs
PCI: pci-x-pci-express-read-control-interfaces cleanups
PCI: Fix typo in include/linux/pci.h
PCI: pci_ids, remove double or more empty lines
PCI: pci_ids, add atheros and 3com_2 vendors
PCI: pci_ids, reorder some entries
PCI: i386: traps, change VENDOR to DEVICE
PCI: ATM: lanai, change VENDOR to DEVICE
PCI: Change all drivers to use pci_device->revision
...
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 028614c..e07f253 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -664,109 +664,6 @@
Well, not for some odd devices. See the next section for information
about that.
- DAC Addressing for Address Space Hungry Devices
-
-There exists a class of devices which do not mesh well with the PCI
-DMA mapping API. By definition these "mappings" are a finite
-resource. The number of total available mappings per bus is platform
-specific, but there will always be a reasonable amount.
-
-What is "reasonable"? Reasonable means that networking and block I/O
-devices need not worry about using too many mappings.
-
-As an example of a problematic device, consider compute cluster cards.
-They can potentially need to access gigabytes of memory at once via
-DMA. Dynamic mappings are unsuitable for this kind of access pattern.
-
-To this end we've provided a small API by which a device driver
-may use DAC cycles to directly address all of physical memory.
-Not all platforms support this, but most do. It is easy to determine
-whether the platform will work properly at probe time.
-
-First, understand that there may be a SEVERE performance penalty for
-using these interfaces on some platforms. Therefore, you MUST only
-use these interfaces if it is absolutely required. %99 of devices can
-use the normal APIs without any problems.
-
-Note that for streaming type mappings you must either use these
-interfaces, or the dynamic mapping interfaces above. You may not mix
-usage of both for the same device. Such an act is illegal and is
-guaranteed to put a banana in your tailpipe.
-
-However, consistent mappings may in fact be used in conjunction with
-these interfaces. Remember that, as defined, consistent mappings are
-always going to be SAC addressable.
-
-The first thing your driver needs to do is query the PCI platform
-layer if it is capable of handling your devices DAC addressing
-capabilities:
-
- int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-You may not use the following interfaces if this routine fails.
-
-Next, DMA addresses using this API are kept track of using the
-dma64_addr_t type. It is guaranteed to be big enough to hold any
-DAC address the platform layer will give to you from the following
-routines. If you have consistent mappings as well, you still
-use plain dma_addr_t to keep track of those.
-
-All mappings obtained here will be direct. The mappings are not
-translated, and this is the purpose of this dialect of the DMA API.
-
-All routines work with page/offset pairs. This is the _ONLY_ way to
-portably refer to any piece of memory. If you have a cpu pointer
-(which may be validly DMA'd too) you may easily obtain the page
-and offset using something like this:
-
- struct page *page = virt_to_page(ptr);
- unsigned long offset = offset_in_page(ptr);
-
-Here are the interfaces:
-
- dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page,
- unsigned long offset,
- int direction);
-
-The DAC address for the tuple PAGE/OFFSET are returned. The direction
-argument is the same as for pci_{map,unmap}_single(). The same rules
-for cpu/device access apply here as for the streaming mapping
-interfaces. To reiterate:
-
- The cpu may touch the buffer before pci_dac_page_to_dma.
- The device may touch the buffer after pci_dac_page_to_dma
- is made, but the cpu may NOT.
-
-When the DMA transfer is complete, invoke:
-
- void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr,
- size_t len, int direction);
-
-This must be done before the CPU looks at the buffer again.
-This interface behaves identically to pci_dma_sync_{single,sg}_for_cpu().
-
-And likewise, if you wish to let the device get back at the buffer after
-the cpu has read/written it, invoke:
-
- void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr,
- size_t len, int direction);
-
-before letting the device access the DMA area again.
-
-If you need to get back to the PAGE/OFFSET tuple from a dma64_addr_t
-the following interfaces are provided:
-
- struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
- unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-
-This is possible with the DAC interfaces purely because they are
-not translated in any way.
-
Optimizing Unmap State Space Consumption
On many platforms, pci_unmap_{single,page}() is simply a nop.
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index d38261b..7754f5a 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -113,9 +113,6 @@
(Please see Documentation/power/pci.txt for descriptions
of PCI Power Management and the related functions.)
- enable_wake Enable device to generate wake events from a low power
- state.
-
shutdown Hook into reboot_notifier_list (kernel/sys.c).
Intended to stop any idling DMA operations.
Useful for enabling wake-on-lan (NIC) or changing
@@ -299,7 +296,10 @@
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
and also ensures that the cache line size register is set correctly.
Check the return value of pci_set_mwi() as not all architectures
-or chip-sets may support Memory-Write-Invalidate.
+or chip-sets may support Memory-Write-Invalidate. Alternatively,
+if Mem-Wr-Inval would be nice to have but is not required, call
+pci_try_set_mwi() to have the system do its best effort at enabling
+Mem-Wr-Inval.
3.2 Request MMIO/IOP resources
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index e00b099..dd8fe43 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -164,7 +164,6 @@
int (*suspend) (struct pci_dev *dev, pm_message_t state);
int (*resume) (struct pci_dev *dev);
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable);
suspend
@@ -251,42 +250,6 @@
this function, except for PM-capable devices when pci_set_power_state is used.
-enable_wake
------------
-
-Usage:
-
-if (dev->driver && dev->driver->enable_wake)
- dev->driver->enable_wake(dev,state,enable);
-
-This callback is generally only relevant for devices that support the PCI PM
-spec and have the ability to generate a PME# (Power Management Event Signal)
-to wake the system up. (However, it is possible that a device may support
-some non-standard way of generating a wake event on sleep.)
-
-Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's
-PM Capabilities describe what power states the device supports generating a
-wake event from:
-
-+------------------+
-| Bit | State |
-+------------------+
-| 11 | D0 |
-| 12 | D1 |
-| 13 | D2 |
-| 14 | D3hot |
-| 15 | D3cold |
-+------------------+
-
-A device can use this to enable wake events:
-
- pci_enable_wake(dev,state,enable);
-
-Note that to enable PME# from D3cold, a value of 4 should be passed to
-pci_enable_wake (since it uses an index into a bitmask). If a driver gets
-a request to enable wake events from D3, two calls should be made to
-pci_enable_wake (one for both D3hot and D3cold).
-
A reference implementation
-------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index cba5f4d..b2c5415 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2814,11 +2814,6 @@
M: kristen.c.accardi@intel.com
S: Supported
-PCI HOTPLUG COMPAQ DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
-S: Maintained
-
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 79c6e5a..2a85dc3 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -327,6 +327,9 @@
bool
default y
+config PCI_SYSCALL
+ def_bool PCI
+
config ALPHA_CORE_AGP
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 28c84e5..6b07f89 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -207,6 +207,10 @@
p[i] = 0;
}
+/* True if the machine supports DAC addressing, and DEV can
+ make use of it given MASK. */
+static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
/* Map a single buffer of the indicated size for PCI DMA in streaming
mode. The 32-bit PCI bus mastering address to use is returned.
Once the device is given the dma address, the device owns this memory
@@ -897,7 +901,7 @@
/* True if the machine supports DAC addressing, and DEV can
make use of it given MASK. */
-int
+static int
pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
{
dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
@@ -917,32 +921,6 @@
return ok;
}
-EXPORT_SYMBOL(pci_dac_dma_supported);
-
-dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page,
- unsigned long offset, int direction)
-{
- return (alpha_mv.pci_dac_offset
- + __pa(page_address(page))
- + (dma64_addr_t) offset);
-}
-EXPORT_SYMBOL(pci_dac_page_to_dma);
-
-struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset;
- return virt_to_page(__va(paddr));
-}
-EXPORT_SYMBOL(pci_dac_dma_to_page);
-
-unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-EXPORT_SYMBOL(pci_dac_dma_to_offset);
/* Helper for generic DMA-mapping functions. */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 50d9f3e..482d33f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -531,6 +531,9 @@
information about which PCI hardware does work under Linux and which
doesn't.
+config PCI_SYSCALL
+ def_bool PCI
+
# Select the host bridge type
config PCI_HOST_VIA82C505
bool
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 0d49d73..66acd50 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -391,8 +391,6 @@
*/
static unsigned int nforce2_detect_chipset(void)
{
- u8 revision;
-
nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
PCI_DEVICE_ID_NVIDIA_NFORCE2,
PCI_ANY_ID, PCI_ANY_ID, NULL);
@@ -400,10 +398,8 @@
if (nforce2_chipset_dev == NULL)
return -ENODEV;
- pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
-
printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
- revision);
+ nforce2_chipset_dev->revision);
printk(KERN_INFO
"cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
index 6667e9c..1941445 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -115,7 +115,6 @@
u8 pci_suscfg;
u8 pci_pmer1;
u8 pci_pmer2;
- u8 pci_rev;
struct pci_dev *cs55x0;
};
@@ -276,7 +275,7 @@
pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
- if (gx_params->pci_rev < 0x10) { /* CS5530(rev 1.2, 1.3) */
+ if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */
suscfg = gx_params->pci_suscfg | SUSMOD;
} else { /* CS5530A,B.. */
suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
@@ -471,7 +470,6 @@
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
- pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
index 698f980..a5b2346 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -205,7 +205,6 @@
* host brige. Abort on these systems.
*/
static struct pci_dev *hostbridge;
- u8 rev = 0;
hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82815_MC,
@@ -216,8 +215,7 @@
if (!hostbridge)
return 2; /* 2-M */
- pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
- if (rev < 5) {
+ if (hostbridge->revision < 5) {
dprintk("hostbridge does not support speedstep\n");
speedstep_chipset_dev = NULL;
pci_dev_put(hostbridge);
diff --git a/arch/i386/mach-visws/traps.c b/arch/i386/mach-visws/traps.c
index 5199bd0..843b67a 100644
--- a/arch/i386/mach-visws/traps.c
+++ b/arch/i386/mach-visws/traps.c
@@ -23,13 +23,13 @@
set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
panic("This machine is not SGI Visual Workstation 320/540");
}
if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
panic("This machine is not SGI Visual Workstation 320/540");
}
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index b95b429..e7306db 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -118,12 +118,9 @@
static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
{
u8 v;
- u8 revision;
int where = 0x55;
int mask = 0x1f; /* clear bits 5, 6, 7 by default */
- pci_read_config_byte(d, PCI_REVISION_ID, &revision);
-
if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
/* fix pci bus latency issues resulted by NB bios error
it appears on bug free^Wreduced kt266x's bios forces
@@ -133,8 +130,8 @@
where = 0x95; /* the memory write queue timer register is
different for the KT266x's: 0x95 not 0x55 */
} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
- (revision == VIA_8363_KL133_REVISION_ID ||
- revision == VIA_8363_KM133_REVISION_ID)) {
+ (d->revision == VIA_8363_KL133_REVISION_ID ||
+ d->revision == VIA_8363_KM133_REVISION_ID)) {
mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
causes screen corruption on the KL133/KM133 */
}
@@ -142,7 +139,7 @@
pci_read_config_byte(d, where, &v);
if (v & ~mask) {
printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
- d->device, revision, where, v, mask, v & mask);
+ d->device, d->revision, where, v, mask, v & mask);
v &= mask;
pci_write_config_byte(d, where, v);
}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index de1bff6..db9ddff 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -520,8 +520,10 @@
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
source "drivers/pci/pcie/Kconfig"
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index f26ede0..c58bd3d 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -2,7 +2,7 @@
# Makefile for the PCI specific kernel interface routines under Linux.
#
-obj-y += pci.o pci-dac.o
+obj-y += pci.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 7fc475f..76b4f0f 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -58,8 +58,6 @@
static void qube_raq_galileo_fixup(struct pci_dev *dev)
{
- unsigned short galileo_id;
-
if (dev->devfn != PCI_DEVFN(0, 0))
return;
@@ -84,16 +82,14 @@
* Therefore we must set the disconnect/retry cycle values to
* something sensible when using the new Galileo.
*/
- pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
- galileo_id &= 0xff; /* mask off class info */
- printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+ printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
#if 0
- if (galileo_id >= 0x10) {
+ if (dev->revision >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
- } else if (galileo_id == 0x1 || galileo_id == 0x2)
+ } else if (dev->revision == 0x1 || dev->revision == 0x2)
#endif
{
signed int timeo;
diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c
deleted file mode 100644
index 0f0ea1b..0000000
--- a/arch/mips/pci/pci-dac.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
- * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org>
- * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
- */
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-#include <dma-coherence.h>
-
-#include <linux/pci.h>
-
-dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page, unsigned long offset, int direction)
-{
- struct device *dev = &pdev->dev;
-
- BUG_ON(direction == DMA_NONE);
-
- if (!plat_device_is_coherent(dev)) {
- unsigned long addr;
-
- addr = (unsigned long) page_address(page) + offset;
- dma_cache_wback_inv(addr, PAGE_SIZE);
- }
-
- return plat_map_dma_mem_page(dev, page) + offset;
-}
-
-EXPORT_SYMBOL(pci_dac_page_to_dma);
-
-struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr)
-{
- return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_to_page);
-
-unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr)
-{
- return dma_addr & ~PAGE_MASK;
-}
-
-EXPORT_SYMBOL(pci_dac_dma_to_offset);
-
-void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
-
- if (!plat_device_is_coherent(&pdev->dev))
- dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu);
-
-void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
-
- if (!plat_device_is_coherent(&pdev->dev))
- dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5eaeafd..6beee32 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -698,8 +698,10 @@
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config PCI_QSPAN
bool "QSpan PCI"
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index e66064b..8698211 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1047,10 +1047,10 @@
#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
+int pcibios_add_platform_entries(struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
+ return device_create_file(&pdev->dev, &dev_attr_devspec);
#endif /* CONFIG_PPC_OF */
}
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 249cca2..e3009a4 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -367,8 +367,10 @@
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
+ dev->revision = get_int_prop(node, "revision-id", 0);
DBG(" class: 0x%x\n", dev->class);
+ DBG(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
@@ -876,9 +878,9 @@
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-void pcibios_add_platform_entries(struct pci_dev *pdev)
+int pcibios_add_platform_entries(struct pci_dev *pdev)
{
- device_create_file(&pdev->dev, &dev_attr_devspec);
+ return device_create_file(&pdev->dev, &dev_attr_devspec);
}
#define ISA_SPACE_MASK 0x1
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index ccce2a4..6bdeeb7 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1237,8 +1237,10 @@
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config MPC83xx_PCI2
bool "Support for 2nd PCI host controller"
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 5e723c4..c2ec13b 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -633,12 +633,6 @@
{
}
-/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
-{
-}
-
-
static int __init
pcibios_init(void)
{
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index fbcc00c..8567cc9 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -210,6 +210,9 @@
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
+config PCI_SYSCALL
+ def_bool PCI
+
source "drivers/pci/Kconfig"
endif
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 89a1b46..6566d13 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -320,8 +320,10 @@
doesn't.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
source "drivers/pci/Kconfig"
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 81f4a5e..55ad1b8 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -448,6 +448,7 @@
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->class = class >> 8;
+ dev->revision = class & 0xff;
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 9f80aad..90f6315 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -22,8 +22,7 @@
int iommu_bio_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_bio_merge);
-int iommu_sac_force __read_mostly = 0;
-EXPORT_SYMBOL(iommu_sac_force);
+static int iommu_sac_force __read_mostly = 0;
int no_iommu __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index f7de02a..e1ca86d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -115,7 +115,6 @@
static int acpi_processor_errata_piix4(struct pci_dev *dev)
{
- u8 rev = 0;
u8 value1 = 0;
u8 value2 = 0;
@@ -127,9 +126,7 @@
* Note that 'dev' references the PIIX4 ACPI Controller.
*/
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- switch (rev) {
+ switch (dev->revision) {
case 0:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
break;
@@ -147,7 +144,7 @@
break;
}
- switch (rev) {
+ switch (dev->revision) {
case 0: /* PIIX4 A-step */
case 1: /* PIIX4 B-step */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 21a7ca4..d9fa329 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -928,20 +928,18 @@
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
int no_piix_dma = 0;
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if (rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if (no_piix_dma)
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 30c4276..0104367 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -455,23 +455,21 @@
static void ali_init_chipset(struct pci_dev *pdev)
{
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *north, *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev >= 0x20 && rev < 0xC2) {
+ if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
pci_read_config_byte(pdev, 0x4B, &tmp);
/* Clear CD-ROM DMA write bit */
tmp &= 0x7F;
pci_write_config_byte(pdev, 0x4B, tmp);
- } else if (rev >= 0xC2) {
+ } else if (pdev->revision >= 0xC2) {
/* Enable cable detection logic */
pci_read_config_byte(pdev, 0x4B, &tmp);
pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@@ -483,21 +481,21 @@
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (rev == 0xC2)
+ if (pdev->revision == 0xC2)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (rev > 0xC2 && rev < 0xC5)
+ else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
}
- if (rev >= 0x20) {
+ if (pdev->revision >= 0x20) {
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
* via 0x54/55.
*/
pci_read_config_byte(pdev, 0x53, &tmp);
- if (rev <= 0x20)
+ if (pdev->revision <= 0x20)
tmp &= ~0x02;
- if (rev >= 0xc7)
+ if (pdev->revision >= 0xc7)
tmp |= 0x03;
else
tmp |= 0x01; /* CD_ROM enable for DMA */
@@ -579,25 +577,23 @@
};
const struct ata_port_info *ppi[] = { NULL, NULL };
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev < 0x20) {
+ if (pdev->revision < 0x20) {
ppi[0] = &info_early;
- } else if (rev < 0xC2) {
+ } else if (pdev->revision < 0xC2) {
ppi[0] = &info_20;
- } else if (rev == 0xC2) {
+ } else if (pdev->revision == 0xC2) {
ppi[0] = &info_c2;
- } else if (rev == 0xC3) {
+ } else if (pdev->revision == 0xC3) {
ppi[0] = &info_c3;
- } else if (rev == 0xC4) {
+ } else if (pdev->revision == 0xC4) {
ppi[0] = &info_c4;
} else
ppi[0] = &info_c5;
@@ -605,7 +601,7 @@
ali_init_chipset(pdev);
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
- if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+ if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b9c44c5..b09faca 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -623,17 +623,15 @@
const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
- u8 rev;
u8 fifo;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
- if (type == 1 && rev > 0x7)
+ if (type == 1 && pdev->revision > 0x7)
type = 2;
/* Check for AMD7411 */
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 3fca589..68f150a 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -266,7 +266,7 @@
}
pci_set_master(cs5530_0);
- pci_set_mwi(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index b67bbf6..430673b 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,8 +587,7 @@
itdev->want[1][1] = ATA_ANY;
itdev->last_device = -1;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
- if (conf == 0x10) {
+ if (pdev->revision == 0x11) {
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 0231aba..8969154 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -410,11 +410,8 @@
static int serverworks_fixup_csb(struct pci_dev *pdev)
{
- u8 rev;
u8 btr;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/* Third Channel Test */
if (!(PCI_FUNC(pdev->devfn) & 1)) {
struct pci_dev * findev = NULL;
@@ -456,7 +453,7 @@
if (!(PCI_FUNC(pdev->devfn) & 1))
btr |= 0x2;
else
- btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(pdev, 0x5A, btr);
return btr;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 657b1ee..9a829a7 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -931,9 +931,7 @@
if (host != NULL) {
chipset = sets; /* Match found */
if (sets->device == 0x630) { /* SIS630 */
- u8 host_rev;
- pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
- if (host_rev >= 0x30) /* 630 ET */
+ if (host->revision >= 0x30) /* 630 ET */
chipset = &sis100_early;
}
break;
@@ -977,7 +975,6 @@
u16 trueid;
u8 prefctl;
u8 idecfg;
- u8 sbrev;
/* Try the second unmasking technique */
pci_read_config_byte(pdev, 0x4a, &idecfg);
@@ -990,11 +987,10 @@
lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
if (lpc_bridge == NULL)
break;
- pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(pdev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
- if (sbrev == 0x10 && (prefctl & 0x80)) {
+ if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
chipset = &sis133_early;
break;
}
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index bde7341..8c2813a 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -270,7 +270,6 @@
static int sl82c105_bridge_revision(struct pci_dev *pdev)
{
struct pci_dev *bridge;
- u8 rev;
/*
* The bridge should be part of the same device, but function 0.
@@ -292,10 +291,8 @@
/*
* We need to find function 0's revision, not function 1
*/
- pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
-
pci_dev_put(bridge);
- return rev;
+ return bridge->revision;
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f0cadbe..f645fe2 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -506,7 +506,6 @@
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
- u8 t;
u8 enable;
u32 timing;
@@ -520,9 +519,8 @@
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
- if (t >= config->rev_min &&
- t <= config->rev_max)
+ if (isa->revision >= config->rev_min &&
+ isa->revision <= config->rev_max)
break;
pci_dev_put(isa);
}
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 8a77a0a..5d57643 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1765,12 +1765,9 @@
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
{
- u8 rev_id;
int early_5080;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
- early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+ early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
if (!early_5080) {
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
@@ -2387,17 +2384,14 @@
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id;
u32 hp_flags = hpriv->hp_flags;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
switch(board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x1:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@@ -2417,7 +2411,7 @@
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@@ -2437,7 +2431,7 @@
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_II;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x7:
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
@@ -2457,7 +2451,7 @@
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_XX42A0;
break;
@@ -2585,14 +2579,12 @@
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id, scc;
+ u8 scc;
const char *scc_s, *gen;
/* Use this to determine the HW stepping of the chip so we know
* what errata to workaround
*/
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
if (scc == 0)
scc_s = "SCSI";
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 0d3a38b..77637e7 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1704,7 +1704,6 @@
struct pci_dev *pci_dev;
unsigned long real_base;
void __iomem *base;
- unsigned char revision;
int error,i,last;
DPRINTK(">eni_init\n");
@@ -1715,12 +1714,6 @@
pci_dev = eni_dev->pci_dev;
real_base = pci_resource_start(pci_dev, 0);
eni_dev->irq = pci_dev->irq;
- error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision);
- if (error) {
- printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
- dev->number,error);
- return -EINVAL;
- }
if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
PCI_COMMAND_MEMORY |
(eni_dev->asic ? PCI_COMMAND_PARITY | PCI_COMMAND_SERR : 0)))) {
@@ -1729,7 +1722,7 @@
return -EIO;
}
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,",
- dev->number,revision,real_base,eni_dev->irq);
+ dev->number,pci_dev->revision,real_base,eni_dev->irq);
if (!(base = ioremap_nocache(real_base,MAP_MAX_SIZE))) {
printk("\n");
printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page "
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 3800bc0..8f995ce 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3679,7 +3679,6 @@
unsigned long membase, srambase;
struct idt77252_dev *card;
struct atm_dev *dev;
- ushort revision = 0;
int i, err;
@@ -3688,19 +3687,13 @@
return err;
}
- if (pci_read_config_word(pcidev, PCI_REVISION_ID, &revision)) {
- printk("idt77252-%d: can't read PCI_REVISION_ID\n", index);
- err = -ENODEV;
- goto err_out_disable_pdev;
- }
-
card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);
if (!card) {
printk("idt77252-%d: can't allocate private data\n", index);
err = -ENOMEM;
goto err_out_disable_pdev;
}
- card->revision = revision;
+ card->revision = pcidev->revision;
card->index = index;
card->pcidev = pcidev;
sprintf(card->name, "idt77252-%d", card->index);
@@ -3762,8 +3755,8 @@
}
printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n",
- card->name, ((revision > 1) && (revision < 25)) ?
- 'A' + revision - 1 : '?', membase, srambase,
+ card->name, ((card->revision > 1) && (card->revision < 25)) ?
+ 'A' + card->revision - 1 : '?', membase, srambase,
card->sramsize / 1024);
if (init_card(dev)) {
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index bb7ef57..a3b605a 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2290,7 +2290,6 @@
unsigned long real_base;
void __iomem *base;
unsigned short command;
- unsigned char revision;
int error, i;
/* The device has been identified and registered. Now we read
@@ -2305,16 +2304,14 @@
real_base = pci_resource_start (iadev->pci, 0);
iadev->irq = iadev->pci->irq;
- if ((error = pci_read_config_word(iadev->pci, PCI_COMMAND,&command))
- || (error = pci_read_config_byte(iadev->pci,
- PCI_REVISION_ID,&revision)))
- {
+ error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
+ if (error) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",
dev->number,error);
return -EINVAL;
}
IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n",
- dev->number, revision, real_base, iadev->irq);)
+ dev->number, iadev->pci->revision, real_base, iadev->irq);)
/* find mapping size of board */
@@ -2353,7 +2350,7 @@
return error;
}
IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n",
- dev->number, revision, base, iadev->irq);)
+ dev->number, iadev->pci->revision, base, iadev->irq);)
/* filling the iphase dev structure */
iadev->mem = iadev->pci_map_size /2;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 09f477d..0e2c1ae 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -246,8 +246,8 @@
};
enum lanai_type {
- lanai2 = PCI_VENDOR_ID_EF_ATM_LANAI2,
- lanaihb = PCI_VENDOR_ID_EF_ATM_LANAIHB
+ lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2,
+ lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
};
struct lanai_dev_stats {
@@ -293,7 +293,6 @@
struct atm_vcc *cbrvcc;
int number;
int board_rev;
- u8 pci_revision;
/* TODO - look at race conditions with maintence of conf1/conf2 */
/* TODO - transmit locking: should we use _irq not _irqsave? */
/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
@@ -1969,14 +1968,6 @@
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
- /* Get the pci revision byte */
- result = pci_read_config_byte(pci, PCI_REVISION_ID,
- &lanai->pci_revision);
- if (result != PCIBIOS_SUCCESSFUL) {
- printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
- "PCI_REVISION_ID: %d\n", lanai->number, result);
- return -EINVAL;
- }
result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
if (result != PCIBIOS_SUCCESSFUL) {
printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
@@ -2254,7 +2245,7 @@
lanai_timed_poll_start(lanai);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
"(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
- (int) lanai->pci_revision, (unsigned long) lanai->base,
+ (int) lanai->pci->revision, (unsigned long) lanai->base,
lanai->pci->irq,
atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
@@ -2491,7 +2482,7 @@
(unsigned int) lanai->magicno, lanai->num_vci);
if (left-- == 0)
return sprintf(page, "revision: board=%d, pci_if=%d\n",
- lanai->board_rev, (int) lanai->pci_revision);
+ lanai->board_rev, (int) lanai->pci->revision);
if (left-- == 0)
return sprintf(page, "EEPROM ESI: "
"%02X:%02X:%02X:%02X:%02X:%02X\n",
@@ -2631,14 +2622,8 @@
}
static struct pci_device_id lanai_pci_tbl[] = {
- {
- PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
- },
- {
- PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
- },
+ { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
+ { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
{ 0, } /* terminal entry */
};
MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 2ad2527..020a87a 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1182,7 +1182,6 @@
struct zatm_dev *zatm_dev;
struct pci_dev *pci_dev;
unsigned short command;
- unsigned char revision;
int error,i,last;
unsigned long t0,t1,t2;
@@ -1192,8 +1191,7 @@
pci_dev = zatm_dev->pci_dev;
zatm_dev->base = pci_resource_start(pci_dev, 0);
zatm_dev->irq = pci_dev->irq;
- if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command)) ||
- (error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision))) {
+ if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
dev->number,error);
return -EINVAL;
@@ -1206,7 +1204,7 @@
}
eprom_get_esi(dev);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
- dev->number,revision,zatm_dev->base,zatm_dev->irq);
+ dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
/* reset uPD98401 */
zout(0,SWR);
while (!(zin(GSR) & uPD98401_INT_IND));
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index e6c534e..df0ddf1 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -462,9 +462,7 @@
* erratum 46: Setup violation on AGP SBA pins - Disable side band addressing.
* With this lot disabled, we should prevent lockups. */
if (agp_bridge->dev->device == PCI_DEVICE_ID_AMD_FE_GATE_700E) {
- u8 revision=0;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
- if (revision == 0x10 || revision == 0x11) {
+ if (pdev->revision == 0x10 || pdev->revision == 0x11) {
agp_bridge->flags = AGP_ERRATA_FASTWRITES;
agp_bridge->flags |= AGP_ERRATA_SBA;
agp_bridge->flags |= AGP_ERRATA_1X;
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 801abdd..d95662e 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -367,10 +367,8 @@
static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
{
char *revstring;
- u8 rev_id;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x01: revstring="A0"; break;
case 0x02: revstring="A1"; break;
case 0x11: revstring="B0"; break;
@@ -386,7 +384,7 @@
* Work around errata.
* Chips before B2 stepping incorrectly reporting v3.5
*/
- if (rev_id < 0x13) {
+ if (pdev->revision < 0x13) {
printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
bridge->major_version = 3;
bridge->minor_version = 0;
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5cfcff5..e783dbf 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -105,14 +105,11 @@
*/
static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
{
- u8 rev;
-
if (acpi_pm_good)
return;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
/* the bug has been fixed in PIIX4M */
- if (rev < 3) {
+ if (dev->revision < 3) {
printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
" Due to workarounds for a bug,\n"
"* this clock source is slow. Consider trying"
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index a0f7e4a..edc2750 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -397,8 +397,7 @@
case PCI_DEVICE_ID_VIA_82C686_4:
/* The VT82C686B (rev 0x40) does support I2C block
transactions, but the VT82C686A (rev 0x30) doesn't */
- if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
- && temp >= 0x40)
+ if (pdev->revision >= 0x40)
vt596_features |= FEATURE_I2CBLOCK;
break;
}
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 8a6b27b..ba0fb92b 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -508,7 +508,7 @@
u8 tmpbyte;
struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
- pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
+ m5229_revision = dev->revision;
isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 84ed30c..8d30b99 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -123,8 +123,7 @@
amd_print("Driver Version: 2.13");
amd_print("South Bridge: %s", pci_name(bmide_dev));
- pci_read_config_byte(dev, PCI_REVISION_ID, &t);
- amd_print("Revision: IDE %#x", t);
+ amd_print("Revision: IDE %#x", dev->revision);
amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]);
amd_print("BM-DMA base: %#lx", amd_base);
@@ -312,8 +311,7 @@
*/
if (amd_config->flags & AMD_CHECK_SWDMA) {
- pci_read_config_byte(dev, PCI_REVISION_ID, &t);
- if (t <= 7)
+ if (dev->revision <= 7)
amd_config->flags |= AMD_BAD_SWDMA;
}
@@ -383,7 +381,7 @@
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
- amd_chipset->name, pci_name(dev), t,
+ amd_chipset->name, pci_name(dev), dev->revision,
amd_dma[fls(amd_config->udma_mask) - 1]);
/*
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 8631b6c..1e89dd6 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -88,7 +88,6 @@
u8 reg72 = 0, reg73 = 0; /* primary */
u8 reg7a = 0, reg7b = 0; /* secondary */
u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
- u8 rev = 0;
p += sprintf(p, "\nController: %d\n", index);
p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
@@ -103,9 +102,8 @@
(void) pci_read_config_byte(dev, UDIDETCR1, ®7b);
/* PCI0643/6 originally didn't have the primary channel enable bit */
- (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
- (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3))
+ (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
reg51 |= CNTRL_ENA_1ST;
p += sprintf(p, "---------------- Primary Channel "
@@ -604,14 +602,11 @@
static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
{
- u8 rev = 0;
-
/*
* The original PCI0646 didn't have the primary channel enable bit,
* it appeared starting with PCI0646U (i.e. revision ID 3).
*/
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev < 3)
+ if (dev->revision < 3)
d->enablebits[0].reg = 0;
return ide_setup_pci_device(dev, d);
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 1eec1f30..b5c00d1 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -236,7 +236,7 @@
*/
pci_set_master(cs5530_0);
- pci_set_mwi(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 4b6bae8..e9b07a9 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1413,11 +1413,9 @@
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0, mcr1 = 0;
+ u8 mcr1 = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT371N";
info = &hpt371n;
@@ -1442,11 +1440,8 @@
static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT372N";
info = &hpt372n;
@@ -1460,11 +1455,8 @@
static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT302N";
info = &hpt302n;
@@ -1478,7 +1470,7 @@
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *dev2;
- u8 rev = 0;
+ u8 rev = dev->revision;
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
"HPT370", "HPT370A", "HPT372",
"HPT372N" };
@@ -1489,8 +1481,6 @@
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
switch (rev) {
case 0:
case 1:
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 2e0b29e..1372c35 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -572,18 +572,16 @@
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if(rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if(cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if(no_piix_dma)
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 1371b5b..ed04e0c 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -55,7 +55,6 @@
NULL
};
-static u8 svwks_revision = 0;
static struct pci_dev *isa_dev;
static int check_in_drive_lists (ide_drive_t *drive, const char **list)
@@ -71,9 +70,6 @@
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mask = 0;
- if (!svwks_revision)
- pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
return 0x1f;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
@@ -88,9 +84,9 @@
return 0;
/* Check the OSB4 DMA33 enable bit */
return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
- } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
+ } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
return 0x07;
- } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
+ } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
u8 btr = 0, mode;
pci_read_config_byte(dev, 0x5A, &btr);
mode = btr & 0x3;
@@ -234,9 +230,6 @@
unsigned int reg;
u8 btr;
- /* save revision id to determine DMA capability */
- pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
/* force Master Latency Timer value to 64 PCICLKs */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
@@ -315,7 +308,7 @@
if (!(PCI_FUNC(dev->devfn) & 1))
btr |= 0x2;
else
- btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(dev, 0x5A, btr);
}
/* Setup HT1000 SouthBridge Controller - Single Channel Only */
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index f875183..756a9b6 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -659,9 +659,7 @@
/* Special case for SiS630 : 630S/ET is ATA_100a */
if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
- u8 hostrev;
- pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
- if (hostrev >= 0x30)
+ if (host->revision >= 0x30)
chipset_family = ATA_100a;
}
pci_dev_put(host);
@@ -702,7 +700,6 @@
u16 trueid;
u8 prefctl;
u8 idecfg;
- u8 sbrev;
pci_read_config_byte(dev, 0x4a, &idecfg);
pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
@@ -712,11 +709,10 @@
if (trueid == 0x5517) { /* SiS 961/961B */
lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
- pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
- if (sbrev == 0x10 && (prefctl & 0x80)) {
+ if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133a;
} else {
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 4878798..a7323d2 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -338,7 +338,6 @@
static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
{
struct pci_dev *bridge;
- u8 rev;
/*
* The bridge should be part of the same device, but function 0.
@@ -360,10 +359,9 @@
/*
* We need to find function 0's revision, not function 1
*/
- pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
pci_dev_put(bridge);
- return rev;
+ return bridge->revision;
}
/*
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index d21dd2e..27e92fb 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -237,16 +237,14 @@
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
{
struct via_isa_bridge *via_config;
- u8 t;
for (via_config = via_isa_bridges; via_config->id; via_config++)
if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(via_config->flags & VIA_BAD_ID),
via_config->id, NULL))) {
- pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
- if (t >= via_config->rev_min &&
- t <= via_config->rev_max)
+ if ((*isa)->revision >= via_config->rev_min &&
+ (*isa)->revision <= via_config->rev_max)
break;
pci_dev_put(*isa);
}
@@ -404,10 +402,9 @@
* Print the boot message.
*/
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
"controller on pci%s\n",
- via_config->name, t,
+ via_config->name, isa->revision,
via_config->udma_mask ? "U" : "MW",
via_dma[via_config->udma_mask ?
(fls(via_config->udma_mask) - 1) : 0],
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index e3a2232..834e86f 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -270,7 +270,6 @@
struct ipath_devdata *dd;
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
- u8 rev;
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
@@ -432,13 +431,7 @@
dd->ipath_deviceid = ent->device; /* save for later use */
dd->ipath_vendorid = ent->vendor;
- ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- if (ret) {
- ipath_dev_err(dd, "Failed to read PCI revision ID unit "
- "%u: err %d\n", dd->ipath_unit, -ret);
- goto bail_regions; /* shouldn't ever happen */
- }
- dd->ipath_pcirev = rev;
+ dd->ipath_pcirev = pdev->revision;
#if defined(__powerpc__)
/* There isn't a generic way to specify writethrough mappings */
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 3403106..6339bb4 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -287,7 +287,6 @@
#ifdef CONFIG_PCI
struct IsdnCardState *cs = card->cs;
char tmp[64];
- u_char pci_rev_id;
u_int found = 0;
u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
@@ -335,8 +334,7 @@
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
- pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
- if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
+ if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
CardType[card->typ],
sct_quadro_subtypes[cs->subtyp]);
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index fdf5d6e..5e6f17d 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -94,7 +94,6 @@
u32 iobase;
u32 length;
- u8 chiprev;
u16 model;
u32 current_frequency;
@@ -415,7 +414,6 @@
goto err_pci;
}
- pci_read_config_byte( pci_dev, PCI_REVISION_ID, &card->chiprev );
pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model );
pci_set_drvdata( pci_dev, card );
@@ -436,7 +434,7 @@
gemtek_pci_mute( card );
printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
- card->chiprev, card->iobase, card->iobase + card->length - 1 );
+ pci_dev->revision, card->iobase, card->iobase + card->length - 1 );
return 0;
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 664aba8..7533fc2 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1809,7 +1809,6 @@
{
int ret = -EBUSY;
unsigned long mchip_adr;
- u8 revision;
if (meye.mchip_dev != NULL) {
printk(KERN_ERR "meye: only one device allowed!\n");
@@ -1885,7 +1884,6 @@
goto outreqirq;
}
- pci_read_config_byte(meye.mchip_dev, PCI_REVISION_ID, &revision);
pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8);
pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64);
@@ -1939,7 +1937,7 @@
printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
printk(KERN_INFO "meye: mchip KL5A72002 rev. %d, base %lx, irq %d\n",
- revision, mchip_adr, meye.mchip_irq);
+ meye.mchip_dev->revision, mchip_adr, meye.mchip_irq);
return 0;
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 58bbc3e..807e699 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1799,7 +1799,6 @@
void __iomem *regs;
resource_size_t pciaddr;
unsigned int addr_len, i, pci_using_dac;
- u8 pci_rev;
#ifndef MODULE
static int version_printed;
@@ -1807,13 +1806,11 @@
printk("%s", version);
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
- pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
dev_err(&pdev->dev,
"This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
- pdev->vendor, pdev->device, pci_rev);
+ pdev->vendor, pdev->device, pdev->revision);
dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
return -ENODEV;
}
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 21a6ccb..327eaa7 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -931,7 +931,6 @@
int i, addr_len, option;
void __iomem *ioaddr;
static int board_idx = -1;
- u8 pci_rev;
assert (pdev != NULL);
assert (ent != NULL);
@@ -949,13 +948,11 @@
}
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
- pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
dev_info(&pdev->dev,
"This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
- pdev->vendor, pdev->device, pci_rev);
+ pdev->vendor, pdev->device, pdev->revision);
dev_info(&pdev->dev,
"Use the \"8139cp\" driver for improved performance and stability.\n");
}
diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
index b1c6034..df4c1a0 100644
--- a/drivers/net/atl1/atl1.h
+++ b/drivers/net/atl1/atl1.h
@@ -210,7 +210,6 @@
u16 phy_spd_default;
u16 dev_rev;
- u8 revision_id;
/* spi flash */
u8 flash_vendor;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 3bb40dd..501919e 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -118,10 +118,6 @@
{
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d681903..02e994b 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6736,10 +6736,9 @@
while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_8132_BRIDGE,
amd_8132))) {
- u8 rev;
- pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev);
- if (rev >= 0x10 && rev <= 0x13) {
+ if (amd_8132->revision >= 0x10 &&
+ amd_8132->revision <= 0x13) {
disable_msi = 1;
pci_dev_put(amd_8132);
break;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 59b9943..f6e4030 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -3422,21 +3422,19 @@
static void cas_check_pci_invariants(struct cas *cp)
{
struct pci_dev *pdev = cp->pdev;
- u8 rev;
cp->cas_flags = 0;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if ((pdev->vendor == PCI_VENDOR_ID_SUN) &&
(pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) {
- if (rev >= CAS_ID_REVPLUS)
+ if (pdev->revision >= CAS_ID_REVPLUS)
cp->cas_flags |= CAS_FLAG_REG_PLUS;
- if (rev < CAS_ID_REVPLUS02u)
+ if (pdev->revision < CAS_ID_REVPLUS02u)
cp->cas_flags |= CAS_FLAG_TARGET_ABORT;
/* Original Cassini supports HW CSUM, but it's not
* enabled by default as it can trigger TX hangs.
*/
- if (rev < CAS_ID_REV2)
+ if (pdev->revision < CAS_ID_REV2)
cp->cas_flags |= CAS_FLAG_NO_HW_CSUM;
} else {
/* Only sun has original cassini chips. */
@@ -4919,13 +4917,13 @@
pci_cmd &= ~PCI_COMMAND_SERR;
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
- if (pci_set_mwi(pdev))
+ if (pci_try_set_mwi(pdev))
printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
pci_name(pdev));
/*
* On some architectures, the default cache line size set
- * by pci_set_mwi reduces perforamnce. We have to increase
+ * by pci_try_set_mwi reduces perforamnce. We have to increase
* it for this case. To start, we'll print some configuration
* data.
*/
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index a4ace07..04e3710 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -250,7 +250,6 @@
np->an_enable = 1;
mii_set_media (dev);
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
err = register_netdev (dev);
if (err)
@@ -879,7 +878,7 @@
skb->protocol = eth_type_trans (skb, dev);
#if 0
/* Checksum done by hw, but csum value unavailable. */
- if (np->pci_rev_id >= 0x0c &&
+ if (np->pdev->pci_rev_id >= 0x0c &&
!(frame_status & (TCPError | UDPError | IPError))) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h
index 814c449..e443065 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/dl2k.h
@@ -668,7 +668,6 @@
unsigned int rx_flow:1; /* Rx flow control enable */
unsigned int phy_media:1; /* 1: fiber, 0: copper */
unsigned int link_status:1; /* Current link status */
- unsigned char pci_rev_id; /* PCI revision ID */
struct netdev_desc *last_tx; /* Last Tx descriptor used. */
unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */
unsigned long cur_tx, old_tx;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 74ea637..6b6401e 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -583,7 +583,6 @@
u32 rx_tco_frames;
u32 rx_over_length_errors;
- u8 rev_id;
u16 leds;
u16 eeprom_wc;
u16 eeprom[256];
@@ -937,9 +936,8 @@
struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
- pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
- nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
if(nic->mac == mac_unknown)
nic->mac = mac_82557_D100_A;
@@ -1279,7 +1277,7 @@
if (nic->flags & ich)
goto noloaducode;
- /* Search for ucode match against h/w rev_id */
+ /* Search for ucode match against h/w revision */
for (opts = ucode_opts; opts->mac; opts++) {
int i;
u32 *ucode = opts->ucode;
@@ -2238,7 +2236,7 @@
u32 *buff = p;
int i;
- regs->version = (1 << 24) | nic->rev_id;
+ regs->version = (1 << 24) | nic->pdev->revision;
buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
ioread8(&nic->csr->scb.cmd_lo) << 16 |
ioread16(&nic->csr->scb.status);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cf8af92..f48b659 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1266,8 +1266,7 @@
hw->device_id = pdev->device;
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_id = pdev->subsystem_device;
-
- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+ hw->revision_id = pdev->revision;
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 42ba1c0..67046e8 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5084,15 +5084,13 @@
np->wolenabled = 0;
if (id->driver_data & DEV_HAS_POWER_CNTRL) {
- u8 revision_id;
- pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
/* take phy and nic out of low power mode */
powerstate = readl(base + NvRegPowerState2);
powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
- revision_id >= 0xA3)
+ pci_dev->revision >= 0xA3)
powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
writel(powerstate, base + NvRegPowerState2);
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 56f8197..b703ccf 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -54,8 +54,6 @@
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
-u8 nx_p2_id = NX_P2_C0;
-
#define DMA_32BIT_MASK 0x00000000ffffffffULL
#define DMA_35BIT_MASK 0x00000007ffffffffULL
@@ -307,8 +305,7 @@
goto err_out_disable_pdev;
pci_set_master(pdev);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id);
- if (nx_p2_id == NX_P2_C1 &&
+ if (pdev->revision == NX_P2_C1 &&
(pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) &&
(pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) {
pci_using_dac = 1;
@@ -552,7 +549,7 @@
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
adapter->ahw.pdev = pdev;
adapter->proc_cmd_buf_counter = 0;
- adapter->ahw.revision_id = nx_p2_id;
+ adapter->ahw.revision_id = pdev->revision;
/* make sure Window == 1 */
netxen_nic_pci_change_crbwindow(adapter, 1);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index fa29a40..58bbfdd 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1135,7 +1135,7 @@
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
*/
if ((nic->device_type == XFRAME_I_DEVICE) &&
- (get_xena_rev_id(nic->pdev) < 4))
+ (nic->pdev->revision < 4))
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
val64 = readq(&bar0->tx_fifo_partition_0);
@@ -1873,7 +1873,7 @@
herc = (sp->device_type == XFRAME_II_DEVICE);
if (flag == FALSE) {
- if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+ if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
} else {
@@ -1881,7 +1881,7 @@
ret = 1;
}
} else {
- if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+ if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
@@ -7076,23 +7076,6 @@
}
/**
- * get_xena_rev_id - to identify revision ID of xena.
- * @pdev : PCI Dev structure
- * Description:
- * Function to identify the Revision ID of xena.
- * Return value:
- * returns the revision ID of the device.
- */
-
-static int get_xena_rev_id(struct pci_dev *pdev)
-{
- u8 id = 0;
- int ret;
- ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
- return id;
-}
-
-/**
* s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
@@ -7550,7 +7533,7 @@
s2io_vpd_read(sp);
DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
- sp->product_name, get_xena_rev_id(sp->pdev));
+ sp->product_name, pdev->revision);
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 5859278..3887fe6 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -1033,7 +1033,6 @@
static int s2io_set_swapper(struct s2io_nic * sp);
static void s2io_card_down(struct s2io_nic *nic);
static int s2io_card_up(struct s2io_nic *nic);
-static int get_xena_rev_id(struct pci_dev *pdev);
static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
int bit_state);
static int s2io_add_isr(struct s2io_nic * sp);
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index f2e1019..8b64786 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -740,7 +740,7 @@
pci_set_master(pdev);
/* enable MWI -- it vastly improves Rx performance on sparc64 */
- pci_set_mwi(pdev);
+ pci_try_set_mwi(pdev);
#ifdef ZEROCOPY
/* Starfire can do TCP/UDP checksumming */
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index c8ba534..af0c983 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -397,7 +397,6 @@
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
struct pci_dev *pci_dev;
void __iomem *base;
- unsigned char pci_rev_id;
};
/* The station address location in the EEPROM. */
@@ -544,8 +543,6 @@
dev->change_mtu = &change_mtu;
pci_set_drvdata(pdev, dev);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
-
i = register_netdev(dev);
if (i)
goto err_out_unmap_rx;
@@ -828,7 +825,7 @@
iowrite8(100, ioaddr + RxDMAPollPeriod);
iowrite8(127, ioaddr + TxDMAPollPeriod);
/* Fix DFE-580TX packet drop issue */
- if (np->pci_rev_id >= 0x14)
+ if (np->pci_dev->revision >= 0x14)
iowrite8(0x01, ioaddr + DebugCtrl1);
netif_start_queue(dev);
@@ -1194,7 +1191,7 @@
hw_frame_id = ioread8(ioaddr + TxFrameId);
}
- if (np->pci_rev_id >= 0x14) {
+ if (np->pci_dev->revision >= 0x14) {
spin_lock(&np->lock);
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
int entry = np->dirty_tx % TX_RING_SIZE;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 15146a1..8b35f13 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -3095,12 +3095,8 @@
#ifdef CONFIG_SPARC
hp->hm_revision = of_getintprop_default(dp, "hm-rev", 0xff);
- if (hp->hm_revision == 0xff) {
- unsigned char prev;
-
- pci_read_config_byte(pdev, PCI_REVISION_ID, &prev);
- hp->hm_revision = 0xc0 | (prev & 0x0f);
- }
+ if (hp->hm_revision == 0xff)
+ hp->hm_revision = 0xc0 | (pdev->revision & 0x0f);
#else
/* works with this on non-sparc hosts */
hp->hm_revision = 0x20;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3245f16..32e4037 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10551,11 +10551,7 @@
continue;
}
if (pci_id->rev != PCI_ANY_ID) {
- u8 rev;
-
- pci_read_config_byte(bridge, PCI_REVISION_ID,
- &rev);
- if (rev > pci_id->rev)
+ if (bridge->revision > pci_id->rev)
continue;
}
if (bridge->subordinate &&
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 106dc1e..74eb121 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -533,7 +533,6 @@
struct net_device *dev;
TLanPrivateInfo *priv;
- u8 pci_rev;
u16 device_id;
int reg, rc = -ENODEV;
@@ -577,8 +576,6 @@
goto err_out_free_dev;
}
- pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
-
for ( reg= 0; reg <= 5; reg ++ ) {
if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
pci_io_base = pci_resource_start(pdev, reg);
@@ -595,7 +592,7 @@
dev->base_addr = pci_io_base;
dev->irq = pdev->irq;
- priv->adapterRev = pci_rev;
+ priv->adapterRev = pdev->revision;
pci_set_master(pdev);
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 42fca26..0990289 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -2134,7 +2134,7 @@
u_short vendor, status;
u_int irq = 0, device;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- int i, j, cfrv;
+ int i, j;
struct de4x5_private *lp = netdev_priv(dev);
struct list_head *walk;
@@ -2150,7 +2150,6 @@
/* Get the chip configuration revision register */
pb = this_dev->bus->number;
- pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv);
/* Set the device number information */
lp->device = PCI_SLOT(this_dev->devfn);
@@ -2158,7 +2157,8 @@
/* Set the chipset information */
if (is_DC2114x) {
- device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+ device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+ ? DC21142 : DC21143);
}
lp->chipset = device;
@@ -2254,7 +2254,7 @@
}
/* Get the chip configuration revision register */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv);
+ lp->cfrv = pdev->revision;
/* Set the device number information */
lp->device = dev_num;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4ed67ff..dab74fe 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -181,11 +181,12 @@
udelay(5);
#define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
DM9102A_IO_SIZE: DM9102_IO_SIZE)
-#define CHK_IO_SIZE(pci_dev, dev_rev) \
- (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
+#define CHK_IO_SIZE(pci_dev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+ (pci_dev)->revision))
/* Sten Check */
#define DEVICE net_device
@@ -205,7 +206,7 @@
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
- u32 chip_revision; /* Chip revision */
+ u8 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
@@ -359,7 +360,7 @@
{
struct dmfe_board_info *db; /* board information structure */
struct net_device *dev;
- u32 dev_rev, pci_pmr;
+ u32 pci_pmr;
int i, err;
DMFE_DBUG(0, "dmfe_init_one()", 0);
@@ -392,10 +393,7 @@
goto err_out_disable;
}
- /* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
- if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
@@ -433,7 +431,7 @@
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
- db->chip_revision = dev_rev;
+ db->chip_revision = pdev->revision;
db->wol_mode = 0;
db->pdev = pdev;
@@ -455,7 +453,7 @@
pci_read_config_dword(pdev, 0x50, &pci_pmr);
pci_pmr &= 0x70000;
- if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+ if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
db->chip_type = 1; /* DM9102A E3 */
else
db->chip_type = 0;
@@ -553,7 +551,7 @@
/* CR6 operation mode decision */
if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
- (db->chip_revision >= 0x02000030) ) {
+ (db->chip_revision >= 0x30) ) {
db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
db->dm910x_chk_mode=4; /* Enter the normal mode */
@@ -1199,9 +1197,9 @@
tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
if ( ((db->chip_id == PCI_DM9102_ID) &&
- (db->chip_revision == 0x02000030)) ||
+ (db->chip_revision == 0x30)) ||
((db->chip_id == PCI_DM9132_ID) &&
- (db->chip_revision == 0x02000010)) ) {
+ (db->chip_revision == 0x10)) ) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
link_ok = 0;
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 041af63..7dcd138 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1155,7 +1155,7 @@
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
- if (csr0 & MWI) pci_set_mwi(pdev);
+ if (csr0 & MWI) pci_try_set_mwi(pdev);
else pci_clear_mwi(pdev);
/* read result from hardware (in case bit refused to enable) */
@@ -1238,7 +1238,6 @@
};
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
- u8 chip_rev;
int i, irq;
unsigned short sum;
unsigned char *ee_data;
@@ -1274,10 +1273,8 @@
if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
{
- u32 dev_rev;
/* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
- if(dev_rev < 0x02000030)
+ if (pdev->revision < 0x02000030)
{
printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
@@ -1360,8 +1357,6 @@
if (!ioaddr)
goto err_out_free_res;
- pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
-
/*
* initialize private data structure 'tp'
* it is zeroed and aligned in alloc_etherdev
@@ -1382,7 +1377,7 @@
tp->flags = tulip_tbl[chip_idx].flags;
tp->pdev = pdev;
tp->base_addr = ioaddr;
- tp->revision = chip_rev;
+ tp->revision = pdev->revision;
tp->csr0 = csr0;
spin_lock_init(&tp->lock);
spin_lock_init(&tp->mii_lock);
@@ -1399,7 +1394,7 @@
tulip_mwi_config (pdev, dev);
#else
/* MWI is broken for DC21143 rev 65... */
- if (chip_idx == DC21143 && chip_rev == 65)
+ if (chip_idx == DC21143 && pdev->revision == 65)
tp->csr0 &= ~MWI;
#endif
@@ -1640,7 +1635,7 @@
#else
"Port"
#endif
- " %#llx,", dev->name, chip_name, chip_rev,
+ " %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 37e35cd..16a54e6 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -205,7 +205,6 @@
{
struct net_device *dev = NULL;
struct xircom_private *private;
- unsigned char chip_rev;
unsigned long flags;
unsigned short tmp16;
enter("xircom_probe");
@@ -224,8 +223,6 @@
pci_read_config_word (pdev,PCI_STATUS, &tmp16);
pci_write_config_word (pdev, PCI_STATUS,tmp16);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
return -ENODEV;
@@ -286,7 +283,7 @@
goto reg_fail;
}
- printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
+ printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index f984fbd..fc439f3 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -524,7 +524,6 @@
int chip_idx = id->driver_data;
long ioaddr;
int i;
- u8 chip_rev;
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -620,9 +619,8 @@
if (register_netdev(dev))
goto err_out_cleardev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
printk(KERN_INFO "%s: %s rev %d at %#3lx,",
- dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+ dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
for (i = 0; i < 6; i++)
printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
printk(", IRQ %d.\n", dev->irq);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index df52454..0358720 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2267,12 +2267,6 @@
typhoon_resume(pdev);
return -EBUSY;
}
-
-static int
-typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- return pci_enable_wake(pdev, state, enable);
-}
#endif
static int __devinit
@@ -2636,7 +2630,6 @@
#ifdef CONFIG_PM
.suspend = typhoon_suspend,
.resume = typhoon_resume,
- .enable_wake = typhoon_enable_wake,
#endif
};
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 565f6cc..f51c2c1 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -622,7 +622,6 @@
struct net_device *dev;
struct rhine_private *rp;
int i, rc;
- u8 pci_rev;
u32 quirks;
long pioaddr;
long memaddr;
@@ -642,27 +641,25 @@
printk(version);
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
io_size = 256;
phy_id = 0;
quirks = 0;
name = "Rhine";
- if (pci_rev < VTunknown0) {
+ if (pdev->revision < VTunknown0) {
quirks = rqRhineI;
io_size = 128;
}
- else if (pci_rev >= VT6102) {
+ else if (pdev->revision >= VT6102) {
quirks = rqWOL | rqForceReset;
- if (pci_rev < VT6105) {
+ if (pdev->revision < VT6105) {
name = "Rhine II";
quirks |= rqStatusWBRace; /* Rhine-II exclusive */
}
else {
phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
- if (pci_rev >= VT6105_B0)
+ if (pdev->revision >= VT6105_B0)
quirks |= rq6patterns;
- if (pci_rev < VT6105M)
+ if (pdev->revision < VT6105M)
name = "Rhine III";
else
name = "Rhine III (Management Adapter)";
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index b670b97..f331843 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -890,8 +890,7 @@
static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
{
- if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
- return -EIO;
+ vptr->rev_id = pdev->revision;
pci_set_master(pdev);
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 999bf71..ec1c556 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -3439,7 +3439,6 @@
cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int first_time = 1;
- ucchar cpc_rev_id;
int err, eeprom_outdated = 0;
ucshort device_id;
pc300_t *card;
@@ -3480,7 +3479,6 @@
card->hw.falcsize = pci_resource_len(pdev, 4);
card->hw.plxphys = pci_resource_start(pdev, 5);
card->hw.plxsize = pci_resource_len(pdev, 5);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id);
switch (device_id) {
case PCI_DEVICE_ID_PC300_RX_1:
@@ -3498,7 +3496,7 @@
}
#ifdef PC300_DEBUG_PCI
printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq);
+ printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx "
"ctladdr=0x%08lx falcaddr=0x%08lx\n",
card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index aff05db..dfbd3b0 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -311,7 +311,6 @@
const struct pci_device_id *ent)
{
card_t *card;
- u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
@@ -366,7 +365,6 @@
return -ENOMEM;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index ca06a00..7f720de 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -289,7 +289,6 @@
const struct pci_device_id *ent)
{
card_t *card;
- u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
@@ -330,7 +329,6 @@
return -ENOMEM;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index ef6b253..c5d6753 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3741,10 +3741,8 @@
&bcm->board_type);
if (err)
goto err_iounmap;
- err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
- &bcm->board_revision);
- if (err)
- goto err_iounmap;
+
+ bcm->board_revision = bcm->pci_dev->revision;
err = bcm43xx_chipset_attach(bcm);
if (err)
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 0cd48d1..7da3664 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -453,8 +453,6 @@
.suspend = prism2_pci_suspend,
.resume = prism2_pci_resume,
#endif /* CONFIG_PM */
- /* Linux 2.4.6 added save_state and enable_wake that are not used here
- */
};
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 0183df7..040dc3e 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -613,9 +613,6 @@
.id_table = prism2_plx_id_table,
.probe = prism2_plx_probe,
.remove = prism2_plx_remove,
- .suspend = NULL,
- .resume = NULL,
- .enable_wake = NULL
};
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 3dcb13b..af2e4f2 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -87,7 +87,6 @@
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
- /* .enable_wake ; we don't support this yet */
};
/******************************************************************************
@@ -167,8 +166,7 @@
pci_set_master(pdev);
/* enable MWI */
- if (!pci_set_mwi(pdev))
- printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME);
+ pci_try_set_mwi(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index e3beb78..006054a 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -41,9 +41,7 @@
# Cardbus & CompactPCI use setup-bus
obj-$(CONFIG_HOTPLUG) += setup-bus.o
-ifndef CONFIG_X86
-obj-y += syscall.o
-endif
+obj-$(CONFIG_PCI_SYSCALL) += syscall.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index ddbadd95..f6cc0c5 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -211,6 +211,7 @@
extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
extern int acpiphp_disable_slot (struct acpiphp_slot *slot);
+extern int acpiphp_eject_slot (struct acpiphp_slot *slot);
extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index fa5c019..a0ca63a 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -156,11 +156,15 @@
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
+ int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
/* disable the specified slot */
- return acpiphp_disable_slot(slot->acpi_slot);
+ retval = acpiphp_disable_slot(slot->acpi_slot);
+ if (!retval)
+ retval = acpiphp_eject_slot(slot->acpi_slot);
+ return retval;
}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 9ef4e98..1e125b5 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1282,7 +1282,7 @@
/**
* acpiphp_eject_slot - physically eject the slot
*/
-static int acpiphp_eject_slot(struct acpiphp_slot *slot)
+int acpiphp_eject_slot(struct acpiphp_slot *slot)
{
acpi_status status;
struct acpiphp_func *func;
@@ -1368,6 +1368,9 @@
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+ return;
+
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
bridge->hpp.t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
@@ -1502,6 +1505,37 @@
* ACPI event handlers
*/
+static acpi_status
+count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int *count = (int *)context;
+ struct acpiphp_bridge *bridge;
+
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge)
+ (*count)++;
+ return AE_OK ;
+}
+
+static acpi_status
+check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ struct acpiphp_bridge *bridge;
+ char objname[64];
+ struct acpi_buffer buffer = { .length = sizeof(objname),
+ .pointer = objname };
+
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ dbg("%s: re-enumerating slots under %s\n",
+ __FUNCTION__, objname);
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ acpiphp_check_bridge(bridge);
+ }
+ return AE_OK ;
+}
+
/**
* handle_hotplug_event_bridge - handle ACPI event on bridges
*
@@ -1519,6 +1553,7 @@
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
struct acpi_device *device;
+ int num_sub_bridges = 0;
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
@@ -1527,7 +1562,12 @@
}
bridge = acpiphp_handle_to_bridge(handle);
- if (!bridge) {
+ if (type == ACPI_NOTIFY_BUS_CHECK) {
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
+ count_sub_bridges, &num_sub_bridges, NULL);
+ }
+
+ if (!bridge && !num_sub_bridges) {
err("cannot get bridge info\n");
return;
}
@@ -1538,7 +1578,14 @@
case ACPI_NOTIFY_BUS_CHECK:
/* bus re-enumerate */
dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname);
- acpiphp_check_bridge(bridge);
+ if (bridge) {
+ dbg("%s: re-enumerating slots under %s\n",
+ __FUNCTION__, objname);
+ acpiphp_check_bridge(bridge);
+ }
+ if (num_sub_bridges)
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+ ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
break;
case ACPI_NOTIFY_DEVICE_CHECK:
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 6845515..ed4d44e 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -35,6 +35,7 @@
#include <linux/smp_lock.h>
#include <asm/atomic.h>
#include <linux/delay.h>
+#include <linux/kthread.h>
#include "cpci_hotplug.h"
#define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>"
@@ -59,9 +60,8 @@
static atomic_t extracting;
int cpci_debug;
static struct cpci_hp_controller *controller;
-static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
-static struct semaphore thread_exit; /* guard ensure thread has exited before calling it quits */
-static int thread_finished = 1;
+static struct task_struct *cpci_thread;
+static int thread_finished;
static int enable_slot(struct hotplug_slot *slot);
static int disable_slot(struct hotplug_slot *slot);
@@ -357,9 +357,7 @@
controller->ops->disable_irq();
/* Trigger processing by the event thread */
- dbg("Signal event_semaphore");
- up(&event_semaphore);
- dbg("exited cpci_hp_intr");
+ wake_up_process(cpci_thread);
return IRQ_HANDLED;
}
@@ -521,17 +519,12 @@
{
int rc;
- lock_kernel();
- daemonize("cpci_hp_eventd");
- unlock_kernel();
-
dbg("%s - event thread started", __FUNCTION__);
while (1) {
dbg("event thread sleeping");
- down_interruptible(&event_semaphore);
- dbg("event thread woken, thread_finished = %d",
- thread_finished);
- if (thread_finished || signal_pending(current))
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ if (kthread_should_stop())
break;
do {
rc = check_slots();
@@ -541,18 +534,17 @@
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
- break;
+ goto out;
}
- } while (atomic_read(&extracting) && !thread_finished);
- if (thread_finished)
+ } while (atomic_read(&extracting) && !kthread_should_stop());
+ if (kthread_should_stop())
break;
/* Re-enable ENUM# interrupt */
dbg("%s - re-enabling irq", __FUNCTION__);
controller->ops->enable_irq();
}
- dbg("%s - event thread signals exit", __FUNCTION__);
- up(&thread_exit);
+ out:
return 0;
}
@@ -562,12 +554,8 @@
{
int rc;
- lock_kernel();
- daemonize("cpci_hp_polld");
- unlock_kernel();
-
while (1) {
- if (thread_finished || signal_pending(current))
+ if (kthread_should_stop() || signal_pending(current))
break;
if (controller->ops->query_enum()) {
do {
@@ -578,48 +566,36 @@
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
- break;
+ goto out;
}
- } while (atomic_read(&extracting) && !thread_finished);
+ } while (atomic_read(&extracting) && !kthread_should_stop());
}
msleep(100);
}
- dbg("poll thread signals exit");
- up(&thread_exit);
+ out:
return 0;
}
static int
cpci_start_thread(void)
{
- int pid;
-
- /* initialize our semaphores */
- init_MUTEX_LOCKED(&event_semaphore);
- init_MUTEX_LOCKED(&thread_exit);
- thread_finished = 0;
-
if (controller->irq)
- pid = kernel_thread(event_thread, NULL, 0);
+ cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd");
else
- pid = kernel_thread(poll_thread, NULL, 0);
- if (pid < 0) {
+ cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld");
+ if (IS_ERR(cpci_thread)) {
err("Can't start up our thread");
- return -1;
+ return PTR_ERR(cpci_thread);
}
- dbg("Our thread pid = %d", pid);
+ thread_finished = 0;
return 0;
}
static void
cpci_stop_thread(void)
{
+ kthread_stop(cpci_thread);
thread_finished = 1;
- dbg("thread finish command given");
- if (controller->irq)
- up(&event_semaphore);
- dbg("wait for thread to exit");
- down(&thread_exit);
}
int
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 7b1beaa..5e9be44 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -45,8 +45,6 @@
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
-#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
u8 cpci_get_attention_status(struct slot* slot)
{
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 5617cfd..d590a99 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -796,7 +796,6 @@
u8 num_of_slots = 0;
u8 hp_slot = 0;
u8 device;
- u8 rev;
u8 bus_cap;
u16 temp_word;
u16 vendor_id;
@@ -823,9 +822,8 @@
}
dbg("Vendor ID: %x\n", vendor_id);
- rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- dbg("revision: %d\n", rev);
- if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
+ dbg("revision: %d\n", pdev->revision);
+ if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
err(msg_HPC_rev_error);
rc = -ENODEV;
goto err_disable_device;
@@ -836,7 +834,7 @@
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
*/
- if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
+ if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
@@ -870,7 +868,7 @@
switch (subsystem_vid) {
case PCI_VENDOR_ID_COMPAQ:
- if (rev >= 0x13) { /* CIOBX */
+ if (pdev->revision >= 0x13) { /* CIOBX */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
ctrl->push_button = 1;
@@ -1075,7 +1073,7 @@
memcpy(ctrl->pci_bus, pdev->bus, sizeof(*ctrl->pci_bus));
ctrl->bus = pdev->bus->number;
- ctrl->rev = rev;
+ ctrl->rev = pdev->revision;
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index ccc5762..7959c22 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -103,6 +103,7 @@
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ spinlock_t lock;
};
#define INT_BUTTON_IGNORE 0
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 7f22caa..98e541ffe 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -197,6 +197,12 @@
__FUNCTION__);
return;
}
+ /*
+ * After turning power off, we must wait for at least
+ * 1 second before taking any action that relies on
+ * power having been removed from the slot/adapter.
+ */
+ msleep(1000);
}
}
@@ -615,6 +621,12 @@
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
+ /*
+ * After turning power off, we must wait for at least
+ * 1 second before taking any action that relies on
+ * power having been removed from the slot/adapter.
+ */
+ msleep(1000);
}
ret = remove_board(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 9aac6a8..016eea9 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -275,11 +275,19 @@
return retval;
}
-static int pcie_write_cmd(struct slot *slot, u16 cmd)
+/**
+ * pcie_write_cmd - Issue controller command
+ * @slot: slot to which the command is issued
+ * @cmd: command value written to slot control register
+ * @mask: bitmask of slot control register to be modified
+ */
+static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask)
{
struct controller *ctrl = slot->ctrl;
int retval = 0;
u16 slot_status;
+ u16 slot_ctrl;
+ unsigned long flags;
DBG_ENTER_ROUTINE
@@ -299,17 +307,29 @@
__FUNCTION__);
}
- ctrl->cmd_busy = 1;
- retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE));
+ spin_lock_irqsave(&ctrl->lock, flags);
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
- goto out;
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
+ goto out_spin_unlock;
}
+ slot_ctrl &= ~mask;
+ slot_ctrl |= ((cmd & mask) | CMD_CMPL_INTR_ENABLE);
+
+ ctrl->cmd_busy = 1;
+ retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
+ if (retval)
+ err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
+
+ out_spin_unlock:
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+
/*
* Wait for command completion.
*/
- retval = pcie_wait_cmd(ctrl);
+ if (!retval)
+ retval = pcie_wait_cmd(ctrl);
out:
mutex_unlock(&ctrl->ctrl_lock);
DBG_LEAVE_ROUTINE
@@ -502,25 +522,20 @@
static int hpc_toggle_emi(struct slot *slot)
{
- struct controller *ctrl = slot->ctrl;
- u16 slot_cmd = 0;
- u16 slot_ctrl;
- int rc = 0;
+ u16 slot_cmd;
+ u16 cmd_mask;
+ int rc;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n",
- __FUNCTION__);
- return rc;
+ slot_cmd = EMI_CTRL;
+ cmd_mask = EMI_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl | EMI_CTRL);
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
-
- pcie_write_cmd(slot, slot_cmd);
+ rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
slot->last_emi_toggle = get_seconds();
DBG_LEAVE_ROUTINE
return rc;
@@ -529,35 +544,32 @@
static int hpc_set_attention_status(struct slot *slot, u8 value)
{
struct controller *ctrl = slot->ctrl;
- u16 slot_cmd = 0;
- u16 slot_ctrl;
- int rc = 0;
+ u16 slot_cmd;
+ u16 cmd_mask;
+ int rc;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return rc;
- }
-
+ cmd_mask = ATTN_LED_CTRL;
switch (value) {
case 0 : /* turn off */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x00C0;
+ slot_cmd = 0x00C0;
break;
case 1: /* turn on */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0040;
+ slot_cmd = 0x0040;
break;
case 2: /* turn blink */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0080;
+ slot_cmd = 0x0080;
break;
default:
return -1;
}
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
+ }
- pcie_write_cmd(slot, slot_cmd);
+ rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -570,21 +582,18 @@
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0100;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0100;
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -596,22 +605,18 @@
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0300;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0300;
-
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -623,22 +628,18 @@
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0200;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0200;
-
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -669,7 +670,8 @@
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl, slot_status;
+ u16 cmd_mask;
+ u16 slot_status;
int retval = 0;
DBG_ENTER_ROUTINE
@@ -692,23 +694,23 @@
}
}
- retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (retval) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return retval;
- }
-
- slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
-
+ slot_cmd = POWER_ON;
+ cmd_mask = PWR_CTRL;
/* Enable detection that we turned off at slot power-off time */
- if (!pciehp_poll_mode)
+ if (!pciehp_poll_mode) {
slot_cmd = slot_cmd |
PWR_FAULT_DETECT_ENABLE |
MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE |
HP_INTR_ENABLE;
+ cmd_mask = cmd_mask |
+ PWR_FAULT_DETECT_ENABLE |
+ MRL_DETECT_ENABLE |
+ PRSN_DETECT_ENABLE |
+ HP_INTR_ENABLE;
+ }
- retval = pcie_write_cmd(slot, slot_cmd);
+ retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
@@ -726,21 +728,15 @@
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
+ u16 cmd_mask;
int retval = 0;
DBG_ENTER_ROUTINE
dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot);
- retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (retval) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return retval;
- }
-
- slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
-
+ slot_cmd = POWER_OFF;
+ cmd_mask = PWR_CTRL;
/*
* If we get MRL or presence detect interrupts now, the isr
* will notice the sticky power-fault bit too and issue power
@@ -748,14 +744,19 @@
* of command completions, since the power-fault bit remains on
* till the slot is powered on again.
*/
- if (!pciehp_poll_mode)
+ if (!pciehp_poll_mode) {
slot_cmd = (slot_cmd &
~PWR_FAULT_DETECT_ENABLE &
~MRL_DETECT_ENABLE &
~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask |
+ PWR_FAULT_DETECT_ENABLE |
+ MRL_DETECT_ENABLE |
+ PRSN_DETECT_ENABLE |
+ HP_INTR_ENABLE;
+ }
- retval = pcie_write_cmd(slot, slot_cmd);
-
+ retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
return -1;
@@ -775,6 +776,7 @@
u16 temp_word;
int hp_slot = 0; /* only 1 slot per PCI Express port */
int rc = 0;
+ unsigned long flags;
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
@@ -794,10 +796,12 @@
dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
/* Mask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
+ spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOT_CTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
@@ -808,8 +812,10 @@
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
+ spin_unlock_irqrestore(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
@@ -859,10 +865,12 @@
}
/* Unmask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
+ spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
@@ -873,8 +881,10 @@
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
+ spin_unlock_irqrestore(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
@@ -1237,6 +1247,7 @@
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
+ spin_lock_init(&ctrl->lock);
/* setup wait queue */
init_waitqueue_head(&ctrl->queue);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index b5ac810..c806249 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -55,8 +55,6 @@
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
if (ACPI_FAILURE (status)) {
- printk(KERN_DEBUG
- "Evaluate _OSC Set fails. Status = 0x%04x\n", status);
*ret_status = status;
return status;
}
@@ -124,11 +122,9 @@
in_params[3].buffer.pointer = (u8 *)context;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
- if (ACPI_FAILURE (status)) {
- printk(KERN_DEBUG
- "Evaluate _OSC Set fails. Status = 0x%04x\n", status);
+ if (ACPI_FAILURE (status))
return status;
- }
+
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6543cbe..10dbdec 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -603,6 +603,11 @@
.write = pci_write_config,
};
+int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev)
+{
+ return 0;
+}
+
int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
{
struct bin_attribute *rom_attr = NULL;
@@ -642,10 +647,14 @@
}
}
/* add platform-specific attributes */
- pcibios_add_platform_entries(pdev);
+ if (pcibios_add_platform_entries(pdev))
+ goto err_rom_file;
return 0;
+err_rom_file:
+ if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
+ sysfs_remove_bin_file(&pdev->dev.kobj, rom_attr);
err_rom:
kfree(rom_attr);
err_resource_files:
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fd47ac0..03fd59e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -406,6 +406,13 @@
if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
return 0;
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+
+ /* abort if the device doesn't support PM capabilities */
+ if (!pm)
+ return -EIO;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
@@ -418,13 +425,6 @@
return 0; /* we're already there */
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* abort if the device doesn't support PM capabilities */
- if (!pm)
- return -EIO;
-
pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
printk(KERN_DEBUG
@@ -1186,6 +1186,11 @@
return 0;
}
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
void pci_clear_mwi(struct pci_dev *dev)
{
}
@@ -1242,9 +1247,7 @@
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
- * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
- * and then calls @pcibios_set_mwi to do the needed arch specific
- * operations or a generic mwi-prep function.
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
@@ -1260,7 +1263,8 @@
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
+ pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
+ pci_name(dev));
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -1269,6 +1273,21 @@
}
/**
+ * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
+ * @dev: the PCI device for which MWI is enabled
+ *
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
+ * Callers are not required to check the return value.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ int rc = pci_set_mwi(dev);
+ return rc;
+}
+
+/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
*
@@ -1375,6 +1394,164 @@
#endif
/**
+ * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum designed memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_max_mmrbc(struct pci_dev *dev)
+{
+ int err, cap;
+ u32 stat;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ return -EINVAL;
+
+ return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+}
+EXPORT_SYMBOL(pcix_get_max_mmrbc);
+
+/**
+ * pcix_get_mmrbc - get PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_mmrbc(struct pci_dev *dev)
+{
+ int ret, cap;
+ u32 cmd;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (!ret)
+ ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcix_get_mmrbc);
+
+/**
+ * pcix_set_mmrbc - set PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ * @mmrbc: maximum memory read count in bytes
+ * valid values are 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum memory read byte count, some bridges have erratas
+ * that prevent this.
+ */
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
+{
+ int cap, err = -EINVAL;
+ u32 stat, cmd, v, o;
+
+ if (mmrbc < 512 || mmrbc > 4096 || (mmrbc & (mmrbc-1)))
+ goto out;
+
+ v = ffs(mmrbc) - 10;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ goto out;
+
+ if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
+ return -E2BIG;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (err)
+ goto out;
+
+ o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
+ if (o != v) {
+ if (v > o && dev->bus &&
+ (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+ return -EIO;
+
+ cmd &= ~PCI_X_CMD_MAX_READ;
+ cmd |= v << 2;
+ err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+ }
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcix_set_mmrbc);
+
+/**
+ * pcie_get_readrq - get PCI Express read request size
+ * @dev: PCI device to query
+ *
+ * Returns maximum memory read request in bytes
+ * or appropriate error value.
+ */
+int pcie_get_readrq(struct pci_dev *dev)
+{
+ int ret, cap;
+ u16 ctl;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (!ret)
+ ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcie_get_readrq);
+
+/**
+ * pcie_set_readrq - set PCI Express maximum memory read request
+ * @dev: PCI device to query
+ * @count: maximum memory read count in bytes
+ * valid values are 128, 256, 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum read byte count
+ */
+int pcie_set_readrq(struct pci_dev *dev, int rq)
+{
+ int cap, err = -EINVAL;
+ u16 ctl, v;
+
+ if (rq < 128 || rq > 4096 || (rq & (rq-1)))
+ goto out;
+
+ v = (ffs(rq) - 8) << 12;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (err)
+ goto out;
+
+ if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
+ ctl &= ~PCI_EXP_DEVCTL_READRQ;
+ ctl |= v;
+ err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcie_set_readrq);
+
+/**
* pci_select_bars - Make BAR mask from the type of resource
* @dev: the PCI device for which BAR mask is made
* @flags: resource type mask to be selected
@@ -1442,6 +1619,7 @@
EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
+EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
index 3f37a60..c3bde58 100644
--- a/drivers/pci/pcie/aer/Kconfig
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -4,7 +4,7 @@
config PCIEAER
boolean "Root Port Advanced Error Reporting support"
- depends on PCIEPORTBUS && ACPI
+ depends on PCIEPORTBUS
default y
help
This enables PCI Express Root Port Advanced Error Reporting
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
index 15a4f40..8da3bd8 100644
--- a/drivers/pci/pcie/aer/Makefile
+++ b/drivers/pci/pcie/aer/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_PCIEAER) += aerdriver.o
-aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
+aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index db6ad8e..6846fb4 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -157,7 +157,7 @@
* Initialize Root lock access, e_lock, to Root Error Status Reg,
* Root Error ID Reg, and Root error producer/consumer index.
*/
- rpc->e_lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&rpc->e_lock);
rpc->rpd = dev;
INIT_WORK(&rpc->dpc_handler, aer_isr);
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 5cca394..c7ad68b 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -19,10 +19,6 @@
#define AER_ERROR_MASK 0x001fffff
#define AER_ERROR(d) (d & AER_ERROR_MASK)
-#define OSC_METHOD_RUN_SUCCESS 0
-#define OSC_METHOD_NOT_SUPPORTED 1
-#define OSC_METHOD_RUN_FAILURE 2
-
/* Root Error Status Register Bits */
#define ROOT_ERR_STATUS_MASKS 0x0f
@@ -121,6 +117,14 @@
extern int aer_init(struct pcie_device *dev);
extern void aer_isr(struct work_struct *work);
extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
-extern int aer_osc_setup(struct pci_dev *dev);
+
+#ifdef CONFIG_ACPI
+extern int aer_osc_setup(struct pcie_device *pciedev);
+#else
+static inline int aer_osc_setup(struct pcie_device *pciedev)
+{
+ return 0;
+}
+#endif
#endif //_AERDRV_H_
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index fa68e89..1a1eb45 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -20,19 +20,18 @@
/**
* aer_osc_setup - run ACPI _OSC method
+ * @pciedev: pcie_device which AER is being enabled on
*
- * Return:
- * Zero if success. Nonzero for otherwise.
+ * @return: Zero on success. Nonzero otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
-int aer_osc_setup(struct pci_dev *dev)
+int aer_osc_setup(struct pcie_device *pciedev)
{
- int retval = OSC_METHOD_RUN_SUCCESS;
- acpi_status status;
- acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
- struct pci_dev *pdev = dev;
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *pdev = pciedev->port;
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&pdev->dev);
struct pci_bus *parent;
while (!handle) {
@@ -50,19 +49,20 @@
pdev = parent->self;
}
- if (!handle)
- return OSC_METHOD_NOT_SUPPORTED;
-
- pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
- status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
- if (ACPI_FAILURE(status)) {
- if (status == AE_SUPPORT)
- retval = OSC_METHOD_NOT_SUPPORTED;
- else
- retval = OSC_METHOD_RUN_FAILURE;
+ if (handle) {
+ pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
+ status = pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_AER_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
}
- return retval;
-}
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
+ pciedev->device.bus_id,
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "Run ACPI _OSC fails");
+ return -1;
+ }
+ return 0;
+}
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 08e1303..92a8469 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -22,8 +22,6 @@
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
#include <linux/delay.h>
#include "aerdrv.h"
@@ -119,6 +117,21 @@
return 0;
}
+int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
+{
+ int pos;
+ u32 status;
+
+ pos = pci_find_aer_capability(dev);
+ if (!pos)
+ return -EIO;
+
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
+
+ return 0;
+}
+
static int find_device_iter(struct device *device, void *data)
{
struct pci_dev *dev;
@@ -733,20 +746,8 @@
**/
int aer_init(struct pcie_device *dev)
{
- int status;
-
- /* Run _OSC Method */
- status = aer_osc_setup(dev->port);
-
- if(status != OSC_METHOD_RUN_SUCCESS) {
- printk(KERN_DEBUG "%s: AER service init fails - %s\n",
- __FUNCTION__,
- (status == OSC_METHOD_NOT_SUPPORTED) ?
- "No ACPI _OSC support" : "Run ACPI _OSC fails");
-
- if (!forceload)
- return status;
- }
+ if (aer_osc_setup(dev) && !forceload)
+ return -ENXIO;
return AER_SUCCESS;
}
@@ -755,4 +756,5 @@
EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+EXPORT_SYMBOL_GPL(pci_cleanup_aer_correct_error_status);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 08783bd..a7bce75 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -654,7 +654,7 @@
pcibios_assign_all_busses() ? " " :
" (try 'pci=assign-busses')");
printk(KERN_WARNING "Please report the result to "
- "linux-kernel to fix this permanently\n");
+ "<bk@suse.de> to fix this permanently\n");
}
bus = bus->parent;
}
@@ -700,6 +700,7 @@
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ dev->revision = class & 0xff;
class >>= 8; /* upper 3 bytes */
dev->class = class;
class >>= 8;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 0425a7b..cfa0dfe 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -480,7 +480,6 @@
__initcall(pci_proc_init);
#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_proc_attach_device);
EXPORT_SYMBOL(pci_proc_detach_bus);
#endif
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 01d8f8a..c559085 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -587,10 +587,7 @@
*/
static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
{
- u8 rev;
-
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev >= 0x02) {
+ if (dev->revision >= 0x02) {
printk(KERN_WARNING "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
printk(KERN_WARNING " : booting with the \"noapic\" option.\n");
}
@@ -610,13 +607,12 @@
#define AMD8131_NIOAMODE_BIT 0
static void quirk_amd_8131_ioapic(struct pci_dev *dev)
{
- unsigned char revid, tmp;
+ unsigned char tmp;
if (nr_ioapics == 0)
return;
- pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
- if (revid == AMD8131_revA0 || revid == AMD8131_revB0) {
+ if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) {
printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n");
pci_read_config_byte( dev, AMD8131_MISC, &tmp);
tmp &= ~(1 << AMD8131_NIOAMODE_BIT);
@@ -627,6 +623,22 @@
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
+/*
+ * Some settings of MMRBC can lead to data corruption so block changes.
+ * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
+ */
+static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
+{
+ unsigned char revid;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
+ if (dev->subordinate && revid <= 0x12) {
+ printk(KERN_INFO "AMD8131 rev %x detected, disabling PCI-X "
+ "MMRBC\n", revid);
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
/*
* FIXME: it is questionable that quirk_via_acpi
@@ -843,10 +855,8 @@
static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
- u8 rev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- if (rev != 0x04) /* Only C0 requires this */
+ if (pdev->revision != 0x04) /* Only C0 requires this */
return;
pci_read_config_word(pdev, 0x40, &config);
if (config & (1<<6)) {
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index c132324..9f7090f 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -139,12 +139,14 @@
}
/**
- * pci_get_bus_and_slot - locate PCI device from a given PCI slot
+ * pci_get_bus_and_slot - locate PCI device from a given PCI bus & slot
* @bus: number of PCI bus on which desired PCI device resides
* @devfn: encodes number of PCI slot in which the desired PCI
* device resides and the logical device number within that slot
* in case of multi-function devices.
*
+ * Note: the bus/slot search is limited to PCI domain (segment) 0.
+ *
* Given a PCI bus and slot/function number, the desired PCI device
* is located in system global list of PCI devices. If the device
* is found, a pointer to its data structure is returned. If no
@@ -157,7 +159,8 @@
struct pci_dev *dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- if (dev->bus->number == bus && dev->devfn == devfn)
+ if (pci_domain_nr(dev->bus) == 0 &&
+ (dev->bus->number == bus && dev->devfn == devfn))
return dev;
}
return NULL;
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 5ec297d..5e5191e 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -34,8 +34,6 @@
#define DBG(x...)
#endif
-#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
static void pbus_assign_resources_sorted(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -310,7 +308,7 @@
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
- size = ROUND_UP(size + size1, 4096);
+ size = ALIGN(size + size1, 4096);
if (!size) {
b_res->flags = 0;
return;
@@ -378,11 +376,11 @@
if (!align)
min_align = align1;
- else if (ROUND_UP(align + min_align, min_align) < align1)
+ else if (ALIGN(align + min_align, min_align) < align1)
min_align = align1 >> 1;
align += aligns[order];
}
- size = ROUND_UP(size, min_align);
+ size = ALIGN(size, min_align);
if (!size) {
b_res->flags = 0;
return 1;
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 9d37fec..2ac050d 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -23,14 +23,14 @@
u8 byte;
u16 word;
u32 dword;
- long err, cfg_ret;
+ long err;
+ long cfg_ret;
- err = -EPERM;
if (!capable(CAP_SYS_ADMIN))
- goto error;
+ return -EPERM;
err = -ENODEV;
- dev = pci_find_slot(bus, dfn);
+ dev = pci_get_bus_and_slot(bus, dfn);
if (!dev)
goto error;
@@ -66,7 +66,8 @@
case 4:
err = put_user(dword, (unsigned int __user *)buf);
break;
- };
+ }
+ pci_dev_put(dev);
return err;
error:
@@ -83,7 +84,8 @@
case 4:
put_user(-1, (unsigned int __user *)buf);
break;
- };
+ }
+ pci_dev_put(dev);
return err;
}
@@ -101,7 +103,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- dev = pci_find_slot(bus, dfn);
+ dev = pci_get_bus_and_slot(bus, dfn);
if (!dev)
return -ENODEV;
@@ -137,8 +139,8 @@
default:
err = -EINVAL;
break;
- };
+ }
unlock_kernel();
-
+ pci_dev_put(dev);
return err;
}
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 27852b4..1c0d757 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -223,13 +223,8 @@
{
int err, i;
- err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
- &asd_ha->revision_id);
- if (err) {
- asd_printk("couldn't read REVISION ID register of %s\n",
- pci_name(asd_ha->pcidev));
- goto Err;
- }
+ asd_ha->revision_id = asd_ha->pcidev->revision;
+
err = -ENODEV;
if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
asd_printk("%s is revision %s (%X), which is not supported\n",
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 4a3083e..b3bf77f 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5373,18 +5373,12 @@
**/
static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
{
- u8 rev_id;
int i;
- if (ioa_cfg->type == 0x5702) {
- if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
- &rev_id) == PCIBIOS_SUCCESSFUL) {
- if (rev_id < 4) {
- for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
- if (__is_processor(ipr_blocked_processors[i]))
- return 1;
- }
- }
+ if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
+ for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
+ if (__is_processor(ipr_blocked_processors[i]))
+ return 1;
}
}
return 0;
@@ -7541,13 +7535,7 @@
else
ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
- rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
-
- if (rc != PCIBIOS_SUCCESSFUL) {
- dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
- rc = -EIO;
- goto out_scsi_host_put;
- }
+ ioa_cfg->revid = pdev->revision;
ipr_regs_pci = pci_resource_start(pdev, 0);
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 8b704f7..40f148e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -7148,7 +7148,6 @@
uint32_t mem_addr;
uint32_t io_len;
uint32_t mem_len;
- uint8_t revision_id;
uint8_t bus;
uint8_t func;
uint8_t irq;
@@ -7227,12 +7226,6 @@
}
}
- /* get the revision ID */
- if (pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id)) {
- IPS_PRINTK(KERN_WARNING, pci_dev, "Can't get revision id.\n");
- return -1;
- }
-
subdevice_id = pci_dev->subsystem_device;
/* found a controller */
@@ -7258,7 +7251,7 @@
ha->mem_ptr = mem_ptr;
ha->ioremap_ptr = ioremap_ptr;
ha->host_num = (uint32_t) index;
- ha->revision_id = revision_id;
+ ha->revision_id = pci_dev->revision;
ha->slot_num = PCI_SLOT(pci_dev->devfn);
ha->device_id = pci_dev->device;
ha->subdevice_id = subdevice_id;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dcb4ba0..955b2e4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1578,10 +1578,7 @@
INIT_LIST_HEAD(&phba->fc_nodes);
pci_set_master(pdev);
- retval = pci_set_mwi(pdev);
- if (retval)
- dev_printk(KERN_WARNING, &pdev->dev,
- "Warning: pci_set_mwi returned %d\n", retval);
+ pci_try_set_mwi(pdev);
if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index f6f561d..3e9765f 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -3487,15 +3487,6 @@
return 0;
}
-/* Enable wake event */
-static int nsp32_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
-
- nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host);
-
- return 0;
-}
#endif
/************************************************************************
@@ -3571,7 +3562,6 @@
#ifdef CONFIG_PM
.suspend = nsp32_suspend,
.resume = nsp32_resume,
- .enable_wake = nsp32_enable_wake,
#endif
};
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2a45aec..cf94f86 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -296,7 +296,7 @@
d &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision);
+ ha->chip_revision = ha->pdev->revision;
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 81792e6..6767ee3 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,7 @@
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+ brd->rev = pdev->revision;
brd->irq = pdev->irq;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d975ecf..00fda33 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2964,7 +2964,7 @@
, &dev->pci->pcimstctl);
/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
pci_set_master (pdev);
- pci_set_mwi (pdev);
+ pci_try_set_mwi (pdev);
/* ... also flushes any posted pci writes */
dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 12edc72..966965f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -149,8 +149,7 @@
* fixed in newer silicon.
*/
case 0x0068:
- pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
- if ((temp & 0xff) < 0xa4)
+ if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
}
diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/kyro/STG4000InitDevice.c
index ab5285a..1d3f2080 100644
--- a/drivers/video/kyro/STG4000InitDevice.c
+++ b/drivers/video/kyro/STG4000InitDevice.c
@@ -247,7 +247,6 @@
u32 ulCoreClock;
u32 tmp;
u32 ulChipSpeed;
- u8 rev;
STG_WRITE_REG(IntMask, 0xFFFF);
@@ -276,9 +275,9 @@
PMX2_SOFTRESET_ROM_RST);
pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub);
- pci_read_config_byte(pDev, PCI_REVISION_ID, &rev);
- ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, (u32)rev);
+ ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub,
+ (u32)pDev->revision);
if (ulChipSpeed == 0)
return -EINVAL;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index c8559a7..886e475 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -1994,7 +1994,6 @@
static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dummy) {
struct board* b;
- u_int8_t rev;
u_int16_t svid;
u_int16_t sid;
struct matrox_fb_info* minfo;
@@ -2005,11 +2004,10 @@
#endif
DBG(__FUNCTION__)
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
svid = pdev->subsystem_vendor;
sid = pdev->subsystem_device;
for (b = dev_list; b->vendor; b++) {
- if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < rev)) continue;
+ if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < pdev->revision)) continue;
if (b->svid)
if ((b->svid != svid) || (b->sid != sid)) continue;
break;
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index a30e1e1..93d07ef 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5789,7 +5789,7 @@
ivideo->warncount = 0;
ivideo->chip_id = pdev->device;
ivideo->chip_vendor = pdev->vendor;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &ivideo->revision_id);
+ ivideo->revision_id = pdev->revision;
ivideo->SiS_Pr.ChipRevision = ivideo->revision_id;
pci_read_config_word(pdev, PCI_COMMAND, ®16);
ivideo->sisvga_enabled = reg16 & 0x01;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 62fa550..5eff28ce 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1348,7 +1348,7 @@
f_ddprintk("found device : %s\n", spec->name);
par->dev = pdev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &par->revision);
+ par->revision = pdev->revision;
fix->mmio_start = pci_resource_start(pdev,0);
fix->mmio_len = 0x400000;
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index f0fde6e..5c0dab6 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -1625,8 +1625,7 @@
par->tga_regs_base = mem_base + TGA_REGS_OFFSET;
par->tga_type = tga_type;
if (tga_bus_pci)
- pci_read_config_byte(to_pci_dev(dev), PCI_REVISION_ID,
- &par->tga_chip_rev);
+ par->tga_chip_rev = (to_pci_dev(dev))->revision;
if (tga_bus_tc)
par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff;
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index 85aa112..30ee766 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -199,30 +199,6 @@
extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-/* True if the machine supports DAC addressing, and DEV can
- make use of it given MASK. */
-extern int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-/* Convert to/from DAC dma address and struct page. */
-extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *, struct page *,
- unsigned long, int);
-extern struct page *pci_dac_dma_to_page(struct pci_dev *, dma64_addr_t);
-extern unsigned long pci_dac_dma_to_offset(struct pci_dev *, dma64_addr_t);
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr,
- size_t len, int direction)
-{
- /* Nothing to do. */
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr,
- size_t len, int direction)
-{
- /* Nothing to do. */
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -275,11 +251,6 @@
return hose->need_domain_info;
}
-static inline void
-pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
struct pci_dev *alpha_gendev_to_pci(struct device *dev);
#endif /* __KERNEL__ */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
index f21abd4..ed3f898 100644
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -26,11 +26,6 @@
#define PCI_DMA_BUS_IS_PHYS (0)
/*
- * We don't support DAC DMA cycles.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
-/*
* Whether pci_unmap_{single,page} is a nop depends upon the
* configuration.
*/
@@ -76,10 +71,6 @@
return root;
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
#endif
diff --git a/include/asm-cris/pci.h b/include/asm-cris/pci.h
index b2ac8a3..730ce40 100644
--- a/include/asm-cris/pci.h
+++ b/include/asm-cris/pci.h
@@ -52,47 +52,11 @@
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return pfn_to_page(dma_addr >> PAGE_SHIFT);
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
index f35a451..585d9b4 100644
--- a/include/asm-frv/pci.h
+++ b/include/asm-frv/pci.h
@@ -22,10 +22,6 @@
#define pcibios_assign_all_busses() 0
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
extern void pcibios_set_master(struct pci_dev *dev);
extern void pcibios_penalize_isa_irq(int irq);
@@ -44,9 +40,6 @@
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle);
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV) (0)
diff --git a/include/asm-h8300/pci.h b/include/asm-h8300/pci.h
index 0c771b0..97389b3 100644
--- a/include/asm-h8300/pci.h
+++ b/include/asm-h8300/pci.h
@@ -22,8 +22,4 @@
#define PCI_DMA_BUS_IS_PHYS (1)
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* _ASM_H8300_PCI_H */
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index 64b6d0b..392d3fe 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -56,48 +56,11 @@
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return pfn_to_page(dma_addr >> PAGE_SHIFT);
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- flush_write_buffers();
-}
-
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
index 5a5d1c2..3523d25 100644
--- a/include/asm-ia64/pci.h
+++ b/include/asm-ia64/pci.h
@@ -71,14 +71,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-/* The ia64 platform always supports 64-bit addressing. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-#define pci_dac_page_to_dma(dev,pg,off,dir) ((dma_addr_t) page_to_bus(pg) + (off))
-#define pci_dac_dma_to_page(dev,dma_addr) (virt_to_page(bus_to_virt(dma_addr)))
-#define pci_dac_dma_to_offset(dev,dma_addr) offset_in_page(dma_addr)
-#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir) do { } while (0)
-#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir) do { mb(); } while (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -143,10 +135,6 @@
return (pci_domain_nr(bus) != 0);
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
diff --git a/include/asm-m68k/pci.h b/include/asm-m68k/pci.h
index 9d2c07a..678cb0b 100644
--- a/include/asm-m68k/pci.h
+++ b/include/asm-m68k/pci.h
@@ -54,8 +54,4 @@
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* _ASM_M68K_PCI_H */
diff --git a/include/asm-m68knommu/pci.h b/include/asm-m68knommu/pci.h
index e04c77e..a13f3cc 100644
--- a/include/asm-m68knommu/pci.h
+++ b/include/asm-m68knommu/pci.h
@@ -24,16 +24,6 @@
return 1;
}
-/*
- * Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* CONFIG_COMEMPCI */
#endif /* M68KNOMMU_PCI_H */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index a59d547..4fcc185 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -121,20 +121,6 @@
#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page, unsigned long offset, int direction);
-extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction);
-extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction);
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -181,10 +167,6 @@
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index 7b3be9a..61fbd57 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -238,9 +238,6 @@
#define PCIBIOS_MIN_IO 0x10
#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */
-/* Don't support DAC yet. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* export the pci_ DMA API in terms of the dma_ one */
#include <asm-generic/pci-dma-compat.h>
@@ -284,10 +281,6 @@
return root;
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't need to penalize isa irq's */
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index a19a6f1..f6bd804 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -61,7 +61,6 @@
void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction);
int (*dma_supported)(struct device *dev, u64 mask);
- int (*dac_dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 dma_mask);
};
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
index ce0f13e..e16e7bc 100644
--- a/include/asm-powerpc/pci.h
+++ b/include/asm-powerpc/pci.h
@@ -74,18 +74,6 @@
extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
extern struct dma_mapping_ops *get_pci_dma_ops(void);
-/* For DAC DMA, we currently don't support it by default, but
- * we let 64-bit platforms override this.
- */
-static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask)
-{
- struct dma_mapping_ops *d = get_pci_dma_ops();
-
- if (d && d->dac_dma_supported)
- return d->dac_dma_supported(&hwdev->dev, mask);
- return 0;
-}
-
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
@@ -124,12 +112,6 @@
}
#endif
-/*
- * At present there are very few 32-bit PPC machines that can have
- * memory above the 4GB point, and we don't support that.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
@@ -243,8 +225,6 @@
extern int pci_read_irq_line(struct pci_dev *dev);
-extern void pcibios_add_platform_entries(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
index 9d16202..d2442cd 100644
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -102,12 +102,6 @@
}
#endif
-/*
- * At present there are very few 32-bit PPC machines that can have
- * memory above the 4GB point, and we don't support that.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
@@ -145,8 +139,6 @@
return root;
}
-extern void pcibios_add_platform_entries(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index b1f9a9e..2757ce0 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -110,11 +110,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -134,10 +129,6 @@
int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
index aa80430..57a67cf 100644
--- a/include/asm-sh64/pci.h
+++ b/include/asm-sh64/pci.h
@@ -72,11 +72,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* These macros should be used after a pci_map_sg call has been done
* to get bus addresses of each of the SG entries and their lengths.
* You should only work with the number of sg entries pci_map_sg
@@ -104,10 +99,6 @@
extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
index a750c688..b93b6c7 100644
--- a/include/asm-sparc/pci.h
+++ b/include/asm-sparc/pci.h
@@ -142,8 +142,6 @@
return 1;
}
-#define pci_dac_dma_supported(dev, mask) (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -154,10 +152,6 @@
}
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 47cea16..e11ac10 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -206,49 +206,6 @@
#define PCI64_REQUIRED_MASK (~(dma64_addr_t)0)
#define PCI64_ADDR_BASE 0xfffc000000000000UL
-/* Usage of the pci_dac_foo interfaces is only valid if this
- * test passes.
- */
-#define pci_dac_dma_supported(pci_dev, mask) \
- ((((mask) & PCI64_REQUIRED_MASK) == PCI64_REQUIRED_MASK) ? 1 : 0)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return (PCI64_ADDR_BASE +
- __pa(page_address(page)) + offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- unsigned long paddr = (dma_addr & PAGE_MASK) - PCI64_ADDR_BASE;
-
- return virt_to_page(__va(paddr));
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- /* DAC cycle addressing does not make use of the
- * PCI controller's streaming cache, so nothing to do.
- */
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- /* DAC cycle addressing does not make use of the
- * PCI controller's streaming cache, so nothing to do.
- */
-}
-
#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
@@ -303,10 +260,6 @@
extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return PCI_IRQ_NONE;
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
index 4581826..de2a7d0 100644
--- a/include/asm-v850/pci.h
+++ b/include/asm-v850/pci.h
@@ -116,8 +116,4 @@
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
index 9f7f02c..e85d261 100644
--- a/include/asm-v850/rte_cb.h
+++ b/include/asm-v850/rte_cb.h
@@ -64,7 +64,6 @@
/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
instead, perversely enough, this becomes always true! */
# define pci_dma_supported(dev, mask) 1
-# define pci_dac_dma_supported(dev, mask) 0
# define pcibios_assign_all_busses() 1
#endif /* CONFIG_RTE_MB_A_PCI */
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index 49c5e92..bda94fd 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -54,14 +54,6 @@
#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-/*
- * x86-64 always supports DAC, but sometimes it is useful to force
- * devices through the IOMMU to get automatic sg list merging.
- * Optional right now.
- */
-extern int iommu_sac_force;
-#define pci_dac_dma_supported(pci_dev, mask) (!iommu_sac_force)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
@@ -78,8 +70,6 @@
#else
/* No IOMMU */
-#define pci_dac_dma_supported(pci_dev, mask) 1
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
@@ -91,36 +81,6 @@
#include <asm-generic/pci-dma-compat.h>
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return virt_to_page(__va(dma_addr));
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- flush_write_buffers();
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -135,10 +95,6 @@
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
diff --git a/include/asm-xtensa/pci.h b/include/asm-xtensa/pci.h
index 24eb7fc..66410ac 100644
--- a/include/asm-xtensa/pci.h
+++ b/include/asm-xtensa/pci.h
@@ -64,9 +64,6 @@
#define pci_ubnmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* We cannot access memory above 4GB */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
@@ -74,10 +71,6 @@
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* Implement the pci_ DMA API in terms of the generic device dma_ one */
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 402e178..5096562 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -13,11 +13,13 @@
extern int pci_find_aer_capability(struct pci_dev *dev);
extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+extern int pci_cleanup_aer_correct_error_status(struct pci_dev *dev);
#else
-#define pci_enable_pcie_error_reporting(dev) do { } while (0)
-#define pci_find_aer_capability(dev) do { } while (0)
-#define pci_disable_pcie_error_reporting(dev) do { } while (0)
-#define pci_cleanup_aer_uncorrect_error_status(dev) do { } while (0)
+#define pci_enable_pcie_error_reporting(dev) (-EINVAL)
+#define pci_find_aer_capability(dev) (0)
+#define pci_disable_pcie_error_reporting(dev) (-EINVAL)
+#define pci_cleanup_aer_uncorrect_error_status(dev) (-EINVAL)
+#define pci_cleanup_aer_correct_error_status(dev) (-EINVAL)
#endif
#endif //_AER_H_
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 086a0e5..a5602e2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -111,7 +111,8 @@
typedef unsigned short __bitwise pci_bus_flags_t;
enum pci_bus_flags {
- PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
+ PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
+ PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
};
struct pci_cap_saved_state {
@@ -138,6 +139,7 @@
unsigned short subsystem_vendor;
unsigned short subsystem_device;
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
+ u8 revision; /* PCI revision, low byte of class word */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
u8 rom_base_reg; /* which config register controls the ROM */
u8 pin; /* which interrupt pin this device uses */
@@ -313,7 +315,7 @@
/* ---------------------------------------------------------------- */
/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
- * a set fof callbacks in struct pci_error_handlers, then that device driver
+ * a set of callbacks in struct pci_error_handlers, then that device driver
* will be notified of PCI bus errors, and will be driven to recovery
* when an error occurs.
*/
@@ -370,7 +372,6 @@
int (*suspend_late) (struct pci_dev *dev, pm_message_t state);
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
struct pci_error_handlers *err_handler;
@@ -475,7 +476,7 @@
/* Generic PCI functions exported to card drivers */
struct pci_dev __deprecated *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
-struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
+struct pci_dev __deprecated *pci_find_slot (unsigned int bus, unsigned int devfn);
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability (struct pci_dev *dev, int cap);
@@ -544,11 +545,16 @@
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
#define HAVE_PCI_SET_MWI
int __must_check pci_set_mwi(struct pci_dev *dev);
+int pci_try_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
void pci_intx(struct pci_dev *dev, int enable);
void pci_msi_off(struct pci_dev *dev);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
+int pcix_get_max_mmrbc(struct pci_dev *dev);
+int pcix_get_mmrbc(struct pci_dev *dev);
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
+int pcie_set_readrq(struct pci_dev *dev, int rq);
void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i);
@@ -876,5 +882,7 @@
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
+extern int pcibios_add_platform_entries(struct pci_dev *dev);
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8300001..9366182 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -133,6 +133,9 @@
/* Vendors and devices. Sort key: vendor first, device next. */
+#define PCI_VENDOR_ID_TTTECH 0x0357
+#define PCI_DEVICE_ID_TTTECH_MC322 0x000a
+
#define PCI_VENDOR_ID_DYNALINK 0x0675
#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702
@@ -733,7 +736,6 @@
#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
-
#define PCI_VENDOR_ID_BUSLOGIC 0x104B
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040
@@ -779,7 +781,6 @@
#define PCI_VENDOR_ID_SONY 0x104d
-
/* Winbond have two vendor IDs! See 0x10ad as well */
#define PCI_VENDOR_ID_WINBOND2 0x1050
#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
@@ -817,7 +818,6 @@
#define PCI_DEVICE_ID_PROMISE_20276 0x5275
#define PCI_DEVICE_ID_PROMISE_20277 0x7275
-
#define PCI_VENDOR_ID_UMC 0x1060
#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
@@ -833,7 +833,6 @@
#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
-
#define PCI_VENDOR_ID_APPLE 0x106b
#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
@@ -869,7 +868,6 @@
#define PCI_DEVICE_ID_YAMAHA_744 0x0010
#define PCI_DEVICE_ID_YAMAHA_754 0x0012
-
#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016
#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
@@ -900,12 +898,9 @@
#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
-
-
#define PCI_VENDOR_ID_CONTAQ 0x1080
#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
-
#define PCI_VENDOR_ID_OLICOM 0x108d
#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
@@ -937,23 +932,19 @@
#define PCI_DEVICE_ID_SII_3112 0x3112
#define PCI_DEVICE_ID_SII_1210SA 0x0240
-
#define PCI_VENDOR_ID_BROOKTREE 0x109e
#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
#define PCI_DEVICE_ID_BROOKTREE_879 0x0879
-
#define PCI_VENDOR_ID_SGI 0x10a9
#define PCI_DEVICE_ID_SGI_IOC3 0x0003
+#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
#define PCI_DEVICE_ID_SGI_IOC4 0x100a
-#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002
-
#define PCI_VENDOR_ID_WINBOND 0x10ad
#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
-
#define PCI_VENDOR_ID_PLX 0x10b5
#define PCI_DEVICE_ID_PLX_R685 0x1030
#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a
@@ -987,7 +978,6 @@
#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
-
#define PCI_VENDOR_ID_AL 0x10b9
#define PCI_DEVICE_ID_AL_M1533 0x1533
#define PCI_DEVICE_ID_AL_M1535 0x1535
@@ -1010,18 +1000,14 @@
#define PCI_DEVICE_ID_AL_M5451 0x5451
#define PCI_DEVICE_ID_AL_M7101 0x7101
-
-
#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
-
#define PCI_VENDOR_ID_TCONRAD 0x10da
#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
-
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
@@ -1242,9 +1228,6 @@
#define PCI_DEVICE_ID_IMS_TT128 0x9128
#define PCI_DEVICE_ID_IMS_TT3D 0x9135
-
-
-
#define PCI_VENDOR_ID_INTERG 0x10ea
#define PCI_DEVICE_ID_INTERG_1682 0x1682
#define PCI_DEVICE_ID_INTERG_2000 0x2000
@@ -1263,7 +1246,6 @@
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
-
#define PCI_VENDOR_ID_INIT 0x1101
#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */
@@ -1358,7 +1340,6 @@
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
-
#define PCI_VENDOR_ID_VORTEX 0x1119
#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001
@@ -1384,8 +1365,8 @@
#define PCI_VENDOR_ID_EF 0x111a
#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002
-#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003
-#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005
+#define PCI_DEVICE_ID_EF_ATM_LANAI2 0x0003
+#define PCI_DEVICE_ID_EF_ATM_LANAIHB 0x0005
#define PCI_VENDOR_ID_IDT 0x111d
#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
@@ -1393,7 +1374,6 @@
#define PCI_VENDOR_ID_FORE 0x1127
#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
-
#define PCI_VENDOR_ID_PHILIPS 0x1131
#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
@@ -1412,7 +1392,6 @@
#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
-
#define PCI_VENDOR_ID_SYSKONNECT 0x1148
#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
@@ -1420,7 +1399,6 @@
#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
-
#define PCI_VENDOR_ID_DIGI 0x114f
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
@@ -1431,12 +1409,10 @@
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
-
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
-
#define PCI_VENDOR_ID_SERVERWORKS 0x1166
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
@@ -1505,7 +1481,6 @@
#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
-
#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003
@@ -1523,28 +1498,23 @@
#define PCI_DEVICE_ID_V3_V960 0x0001
#define PCI_DEVICE_ID_V3_V351 0x0002
-
#define PCI_VENDOR_ID_ATT 0x11c1
#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
-
#define PCI_VENDOR_ID_SPECIALIX 0x11cb
#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000
#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000
#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-
#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
#define PCI_DEVICE_ID_AD1889JS 0x1889
-
#define PCI_DEVICE_ID_SEGA_BBA 0x1234
#define PCI_VENDOR_ID_ZORAN 0x11de
#define PCI_DEVICE_ID_ZORAN_36057 0x6057
#define PCI_DEVICE_ID_ZORAN_36120 0x6120
-
#define PCI_VENDOR_ID_COMPEX 0x11f6
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
@@ -1603,8 +1573,6 @@
#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
-
-
#define PCI_VENDOR_ID_AVM 0x1244
#define PCI_DEVICE_ID_AVM_B1 0x0700
#define PCI_DEVICE_ID_AVM_C4 0x0800
@@ -1613,7 +1581,6 @@
#define PCI_DEVICE_ID_AVM_C2 0x1100
#define PCI_DEVICE_ID_AVM_T1 0x1200
-
#define PCI_VENDOR_ID_STALLION 0x124d
/* Allied Telesyn */
@@ -1636,7 +1603,6 @@
#define PCI_VENDOR_ID_SATSAGEM 0x1267
#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
-
#define PCI_VENDOR_ID_ENSONIQ 0x1274
#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000
@@ -1659,7 +1625,6 @@
#define PCI_VENDOR_ID_ALTEON 0x12ae
-
#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002
@@ -1690,7 +1655,6 @@
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485 0x0331
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485 0x0332
-
#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
@@ -1800,7 +1764,6 @@
#define PCI_DEVICE_ID_LMC_SSI 0x0005
#define PCI_DEVICE_ID_LMC_T1 0x0006
-
#define PCI_VENDOR_ID_NETGEAR 0x1385
#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
@@ -1903,6 +1866,8 @@
#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523
+#define PCI_VENDOR_ID_CHELSIO 0x1425
+
#define PCI_VENDOR_ID_SAMSUNG 0x144d
#define PCI_VENDOR_ID_MYRICOM 0x14c1
@@ -2011,13 +1976,10 @@
#define PCI_DEVICE_ID_ENE_720 0x1421
#define PCI_DEVICE_ID_ENE_722 0x1422
-#define PCI_VENDOR_ID_CHELSIO 0x1425
-
#define PCI_SUBVENDOR_ID_PERLE 0x155f
#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001
#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010
-
#define PCI_VENDOR_ID_SYBA 0x1592
#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783
@@ -2036,8 +1998,10 @@
#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
-#define PCI_VENDOR_ID_PDC 0x15e9
+#define PCI_VENDOR_ID_QUICKNET 0x15e2
+#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
+#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_VENDOR_ID_FARSITE 0x1619
#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
@@ -2054,6 +2018,8 @@
#define PCI_DEVICE_ID_BCM1250_PCI 0x0001
#define PCI_DEVICE_ID_BCM1250_HT 0x0002
+#define PCI_VENDOR_ID_ATHEROS 0x168c
+
#define PCI_VENDOR_ID_NETCELL 0x169c
#define PCI_DEVICE_ID_REVOLUTION 0x0044
@@ -2092,7 +2058,6 @@
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
-
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069
@@ -2128,12 +2093,9 @@
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
-
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
-
-
#define PCI_VENDOR_ID_S3 0x5333
#define PCI_DEVICE_ID_S3_TRIO 0x8811
#define PCI_DEVICE_ID_S3_868 0x8880
@@ -2145,7 +2107,6 @@
#define PCI_VENDOR_ID_DUNORD 0x5544
#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-
#define PCI_VENDOR_ID_DCI 0x6666
#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
@@ -2389,7 +2350,6 @@
#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN 0x0500
#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
-
#define PCI_VENDOR_ID_HOLTEK 0x9412
#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
@@ -2405,6 +2365,8 @@
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
+#define PCI_VENDOR_ID_3COM_2 0xa727
+
#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
@@ -2413,13 +2375,7 @@
#define PCI_DEVICE_ID_TIGERJET_300 0x0001
#define PCI_DEVICE_ID_TIGERJET_100 0x0002
-#define PCI_VENDOR_ID_TTTECH 0x0357
-#define PCI_DEVICE_ID_TTTECH_MC322 0x000A
-
#define PCI_VENDOR_ID_XILINX_RME 0xea60
#define PCI_DEVICE_ID_RME_DIGI32 0x9896
#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897
#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898
-
-#define PCI_VENDOR_ID_QUICKNET 0x15E2
-#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
diff --git a/sound/oss/emu10k1/main.c b/sound/oss/emu10k1/main.c
index 16ac025..5058411 100644
--- a/sound/oss/emu10k1/main.c
+++ b/sound/oss/emu10k1/main.c
@@ -1302,7 +1302,7 @@
goto err_irq;
}
- pci_read_config_byte(pci_dev, PCI_REVISION_ID, &card->chiprev);
+ card->chiprev = pci_dev->revision;
pci_read_config_word(pci_dev, PCI_SUBSYSTEM_ID, &card->model);
printk(KERN_INFO "emu10k1: %s rev %d model %#04x found, IO at %#04lx-%#04lx, IRQ %d\n",
diff --git a/sound/oss/es1371.c b/sound/oss/es1371.c
index 593a3aa..5264857 100644
--- a/sound/oss/es1371.c
+++ b/sound/oss/es1371.c
@@ -2894,7 +2894,7 @@
s->irq = pcidev->irq;
s->vendor = pcidev->vendor;
s->device = pcidev->device;
- pci_read_config_byte(pcidev, PCI_REVISION_ID, &s->rev);
+ s->rev = pcidev->revision;
s->codec->private_data = s;
s->codec->id = 0;
s->codec->codec_read = rdcodec;
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index cb59f99..41543a4 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -2218,7 +2218,7 @@
codec->card = card;
codec->pci = pci;
codec->irq = -1;
- pci_read_config_byte(pci, PCI_REVISION_ID, &codec->revision);
+ codec->revision = pci->revision;
codec->spdif_support = spdif_support;
if (pcm_streams < 1)
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 7d8053b..89184a4 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -1639,15 +1639,12 @@
{
struct snd_card *card;
struct atiixp *chip;
- unsigned char revision;
int err;
card = snd_card_new(index, id, THIS_MODULE, 0);
if (card == NULL)
return -ENOMEM;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
-
strcpy(card->driver, spdif_aclink ? "ATIIXP" : "ATIIXP-SPDMA");
strcpy(card->shortname, "ATI IXP");
if ((err = snd_atiixp_create(card, pci, &chip)) < 0)
@@ -1670,7 +1667,8 @@
snd_atiixp_chip_start(chip);
snprintf(card->longname, sizeof(card->longname),
- "%s rev %x with %s at %#lx, irq %i", card->shortname, revision,
+ "%s rev %x with %s at %#lx, irq %i", card->shortname,
+ pci->revision,
chip->ac97[0] ? snd_ac97_get_short_name(chip->ac97[0]) : "?",
chip->addr, chip->irq);
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 904023f..ce752f8 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -1283,15 +1283,12 @@
{
struct snd_card *card;
struct atiixp_modem *chip;
- unsigned char revision;
int err;
card = snd_card_new(index, id, THIS_MODULE, 0);
if (card == NULL)
return -ENOMEM;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
-
strcpy(card->driver, "ATIIXP-MODEM");
strcpy(card->shortname, "ATI IXP Modem");
if ((err = snd_atiixp_create(card, pci, &chip)) < 0)
@@ -1312,7 +1309,7 @@
snd_atiixp_chip_start(chip);
sprintf(card->longname, "%s rev %x at 0x%lx, irq %i",
- card->shortname, revision, chip->addr, chip->irq);
+ card->shortname, pci->revision, chip->addr, chip->irq);
if ((err = snd_card_register(card)) < 0)
goto __error;
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index 238154b..5ec1b6f 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -341,11 +341,7 @@
snd_card_free(card);
return err;
}
- if ((err = pci_read_config_byte(pci, PCI_REVISION_ID,
- &(chip->rev))) < 0) {
- snd_card_free(card);
- return err;
- }
+ chip->rev = pci->revision;
#ifdef CHIP_AU8830
if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) {
printk(KERN_ALERT
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index aaac6e5..a0420bc 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -590,7 +590,6 @@
struct resource *res_port;
int irq;
- unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 48f3f17..9fd7b8a 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1293,13 +1293,12 @@
}
pci_set_master(pci);
- /* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
+ /* read serial */
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
#if 1
printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n", chip->model,
- chip->revision, chip->serial);
+ pci->revision, chip->serial);
#endif
strcpy(card->driver, "CA0106");
strcpy(card->shortname, "CA0106");
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index dbc805c..4a9b59a 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1511,7 +1511,6 @@
struct snd_emu10k1 *emu;
int idx, err;
int is_audigy;
- unsigned char revision;
unsigned int silent_page;
const struct snd_emu_chip_details *c;
static struct snd_device_ops ops = {
@@ -1543,8 +1542,7 @@
emu->synth = NULL;
emu->get_synth_voice = NULL;
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
- emu->revision = revision;
+ emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index bb0fec7..e4af7a9 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -942,7 +942,7 @@
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
+ chip->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
snd_printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 6a0ddcf..7c40396 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -2110,7 +2110,6 @@
struct ensoniq ** rensoniq)
{
struct ensoniq *ensoniq;
- unsigned char cmdb;
int err;
static struct snd_device_ops ops = {
.dev_free = snd_ensoniq_dev_free,
@@ -2151,8 +2150,7 @@
}
#endif
pci_set_master(pci);
- pci_read_config_byte(pci, PCI_REVISION_ID, &cmdb);
- ensoniq->rev = cmdb;
+ ensoniq->rev = pci->revision;
#ifdef CHIP1370
#if 0
ensoniq->ctrl = ES_1370_CDC_EN | ES_1370_SERR_DISABLE |
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 6dc578b..1101517 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1369,7 +1369,6 @@
struct fm801 ** rchip)
{
struct fm801 *chip;
- unsigned char rev;
int err;
static struct snd_device_ops ops = {
.dev_free = snd_fm801_dev_free,
@@ -1405,8 +1404,7 @@
pci_set_master(pci);
}
- pci_read_config_byte(pci, PCI_REVISION_ID, &rev);
- if (rev >= 0xb1) /* FM801-AU */
+ if (pci->revision >= 0xb1) /* FM801-AU */
chip->multichannel = 1;
snd_fm801_chip_init(chip, 0);
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index a289922..50c9f92 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -2431,7 +2431,6 @@
{
struct snd_card *card;
struct via82xx *chip;
- unsigned char revision;
int chip_type = 0, card_type;
unsigned int i;
int err;
@@ -2441,18 +2440,17 @@
return -ENOMEM;
card_type = pci_id->driver_data;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
switch (card_type) {
case TYPE_CARD_VIA686:
strcpy(card->driver, "VIA686A");
- sprintf(card->shortname, "VIA 82C686A/B rev%x", revision);
+ sprintf(card->shortname, "VIA 82C686A/B rev%x", pci->revision);
chip_type = TYPE_VIA686;
break;
case TYPE_CARD_VIA8233:
chip_type = TYPE_VIA8233;
- sprintf(card->shortname, "VIA 823x rev%x", revision);
+ sprintf(card->shortname, "VIA 823x rev%x", pci->revision);
for (i = 0; i < ARRAY_SIZE(via823x_cards); i++) {
- if (revision == via823x_cards[i].revision) {
+ if (pci->revision == via823x_cards[i].revision) {
chip_type = via823x_cards[i].type;
strcpy(card->shortname, via823x_cards[i].name);
break;
@@ -2460,7 +2458,7 @@
}
if (chip_type != TYPE_VIA8233A) {
if (dxs_support == VIA_DXS_AUTO)
- dxs_support = check_dxs_list(pci, revision);
+ dxs_support = check_dxs_list(pci, pci->revision);
/* force to use VIA8233 or 8233A model according to
* dxs_support module option
*/
@@ -2471,7 +2469,7 @@
}
if (chip_type == TYPE_VIA8233A)
strcpy(card->driver, "VIA8233A");
- else if (revision >= VIA_REV_8237)
+ else if (pci->revision >= VIA_REV_8237)
strcpy(card->driver, "VIA8237"); /* no slog assignment */
else
strcpy(card->driver, "VIA8233");
@@ -2482,7 +2480,7 @@
goto __error;
}
- if ((err = snd_via82xx_create(card, pci, chip_type, revision,
+ if ((err = snd_via82xx_create(card, pci, chip_type, pci->revision,
ac97_clock, &chip)) < 0)
goto __error;
card->private_data = chip;
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index b338e15..8cbf8eb 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -1162,7 +1162,6 @@
{
struct snd_card *card;
struct via82xx_modem *chip;
- unsigned char revision;
int chip_type = 0, card_type;
unsigned int i;
int err;
@@ -1172,7 +1171,6 @@
return -ENOMEM;
card_type = pci_id->driver_data;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
switch (card_type) {
case TYPE_CARD_VIA82XX_MODEM:
strcpy(card->driver, "VIA82XX-MODEM");
@@ -1184,7 +1182,7 @@
goto __error;
}
- if ((err = snd_via82xx_create(card, pci, chip_type, revision,
+ if ((err = snd_via82xx_create(card, pci, chip_type, pci->revision,
ac97_clock, &chip)) < 0)
goto __error;
card->private_data = chip;
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index ea861bc..ab7a81c 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -2404,7 +2404,7 @@
chip->pci = pci;
chip->irq = -1;
chip->device_id = pci->device;
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->rev);
+ chip->rev = pci->revision;
chip->reg_area_phys = pci_resource_start(pci, 0);
chip->reg_area_virt = ioremap_nocache(chip->reg_area_phys, 0x8000);
pci_set_master(pci);