| /* |
| * Support for the interrupt controllers found on Power Macintosh, |
| * currently Apple's "Grand Central" interrupt controller in all |
| * it's incarnations. OpenPIC support used on newer machines is |
| * in a separate file |
| * |
| * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) |
| * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org) |
| * IBM, Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/sysdev.h> |
| #include <linux/adb.h> |
| #include <linux/pmu.h> |
| #include <linux/module.h> |
| |
| #include <asm/sections.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/time.h> |
| #include <asm/pmac_feature.h> |
| #include <asm/mpic.h> |
| #include <asm/xmon.h> |
| |
| #include "pmac.h" |
| |
| #ifdef CONFIG_PPC32 |
| struct pmac_irq_hw { |
| unsigned int event; |
| unsigned int enable; |
| unsigned int ack; |
| unsigned int level; |
| }; |
| |
| /* Workaround flags for 32bit powermac machines */ |
| unsigned int of_irq_workarounds; |
| struct device_node *of_irq_dflt_pic; |
| |
| /* Default addresses */ |
| static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; |
| |
| #define GC_LEVEL_MASK 0x3ff00000 |
| #define OHARE_LEVEL_MASK 0x1ff00000 |
| #define HEATHROW_LEVEL_MASK 0x1ff00000 |
| |
| static int max_irqs; |
| static int max_real_irqs; |
| static u32 level_mask[4]; |
| |
| static DEFINE_RAW_SPINLOCK(pmac_pic_lock); |
| |
| #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) |
| static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; |
| static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; |
| static int pmac_irq_cascade = -1; |
| static struct irq_host *pmac_pic_host; |
| |
| static void __pmac_retrigger(unsigned int irq_nr) |
| { |
| if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) { |
| __set_bit(irq_nr, ppc_lost_interrupts); |
| irq_nr = pmac_irq_cascade; |
| mb(); |
| } |
| if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) { |
| atomic_inc(&ppc_n_lost_interrupts); |
| set_dec(1); |
| } |
| } |
| |
| static void pmac_mask_and_ack_irq(struct irq_data *d) |
| { |
| unsigned int src = irqd_to_hwirq(d); |
| unsigned long bit = 1UL << (src & 0x1f); |
| int i = src >> 5; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| __clear_bit(src, ppc_cached_irq_mask); |
| if (__test_and_clear_bit(src, ppc_lost_interrupts)) |
| atomic_dec(&ppc_n_lost_interrupts); |
| out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); |
| out_le32(&pmac_irq_hw[i]->ack, bit); |
| do { |
| /* make sure ack gets to controller before we enable |
| interrupts */ |
| mb(); |
| } while((in_le32(&pmac_irq_hw[i]->enable) & bit) |
| != (ppc_cached_irq_mask[i] & bit)); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| } |
| |
| static void pmac_ack_irq(struct irq_data *d) |
| { |
| unsigned int src = irqd_to_hwirq(d); |
| unsigned long bit = 1UL << (src & 0x1f); |
| int i = src >> 5; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| if (__test_and_clear_bit(src, ppc_lost_interrupts)) |
| atomic_dec(&ppc_n_lost_interrupts); |
| out_le32(&pmac_irq_hw[i]->ack, bit); |
| (void)in_le32(&pmac_irq_hw[i]->ack); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| } |
| |
| static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) |
| { |
| unsigned long bit = 1UL << (irq_nr & 0x1f); |
| int i = irq_nr >> 5; |
| |
| if ((unsigned)irq_nr >= max_irqs) |
| return; |
| |
| /* enable unmasked interrupts */ |
| out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); |
| |
| do { |
| /* make sure mask gets to controller before we |
| return to user */ |
| mb(); |
| } while((in_le32(&pmac_irq_hw[i]->enable) & bit) |
| != (ppc_cached_irq_mask[i] & bit)); |
| |
| /* |
| * Unfortunately, setting the bit in the enable register |
| * when the device interrupt is already on *doesn't* set |
| * the bit in the flag register or request another interrupt. |
| */ |
| if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) |
| __pmac_retrigger(irq_nr); |
| } |
| |
| /* When an irq gets requested for the first client, if it's an |
| * edge interrupt, we clear any previous one on the controller |
| */ |
| static unsigned int pmac_startup_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| unsigned int src = irqd_to_hwirq(d); |
| unsigned long bit = 1UL << (src & 0x1f); |
| int i = src >> 5; |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| if (!irqd_is_level_type(d)) |
| out_le32(&pmac_irq_hw[i]->ack, bit); |
| __set_bit(src, ppc_cached_irq_mask); |
| __pmac_set_irq_mask(src, 0); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| |
| return 0; |
| } |
| |
| static void pmac_mask_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| unsigned int src = irqd_to_hwirq(d); |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| __clear_bit(src, ppc_cached_irq_mask); |
| __pmac_set_irq_mask(src, 1); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| } |
| |
| static void pmac_unmask_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| unsigned int src = irqd_to_hwirq(d); |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| __set_bit(src, ppc_cached_irq_mask); |
| __pmac_set_irq_mask(src, 0); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| } |
| |
| static int pmac_retrigger(struct irq_data *d) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| __pmac_retrigger(irqd_to_hwirq(d)); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| return 1; |
| } |
| |
| static struct irq_chip pmac_pic = { |
| .name = "PMAC-PIC", |
| .irq_startup = pmac_startup_irq, |
| .irq_mask = pmac_mask_irq, |
| .irq_ack = pmac_ack_irq, |
| .irq_mask_ack = pmac_mask_and_ack_irq, |
| .irq_unmask = pmac_unmask_irq, |
| .irq_retrigger = pmac_retrigger, |
| }; |
| |
| static irqreturn_t gatwick_action(int cpl, void *dev_id) |
| { |
| unsigned long flags; |
| int irq, bits; |
| int rc = IRQ_NONE; |
| |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { |
| int i = irq >> 5; |
| bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; |
| /* We must read level interrupts from the level register */ |
| bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); |
| bits &= ppc_cached_irq_mask[i]; |
| if (bits == 0) |
| continue; |
| irq += __ilog2(bits); |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| generic_handle_irq(irq); |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| rc = IRQ_HANDLED; |
| } |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| return rc; |
| } |
| |
| static unsigned int pmac_pic_get_irq(void) |
| { |
| int irq; |
| unsigned long bits = 0; |
| unsigned long flags; |
| |
| #ifdef CONFIG_PPC_PMAC32_PSURGE |
| /* IPI's are a hack on the powersurge -- Cort */ |
| if (smp_processor_id() != 0) { |
| return psurge_secondary_virq; |
| } |
| #endif /* CONFIG_PPC_PMAC32_PSURGE */ |
| raw_spin_lock_irqsave(&pmac_pic_lock, flags); |
| for (irq = max_real_irqs; (irq -= 32) >= 0; ) { |
| int i = irq >> 5; |
| bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; |
| /* We must read level interrupts from the level register */ |
| bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); |
| bits &= ppc_cached_irq_mask[i]; |
| if (bits == 0) |
| continue; |
| irq += __ilog2(bits); |
| break; |
| } |
| raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); |
| if (unlikely(irq < 0)) |
| return NO_IRQ; |
| return irq_linear_revmap(pmac_pic_host, irq); |
| } |
| |
| #ifdef CONFIG_XMON |
| static struct irqaction xmon_action = { |
| .handler = xmon_irq, |
| .flags = 0, |
| .name = "NMI - XMON" |
| }; |
| #endif |
| |
| static struct irqaction gatwick_cascade_action = { |
| .handler = gatwick_action, |
| .flags = IRQF_DISABLED, |
| .name = "cascade", |
| }; |
| |
| static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) |
| { |
| /* We match all, we don't always have a node anyway */ |
| return 1; |
| } |
| |
| static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| int level; |
| |
| if (hw >= max_irqs) |
| return -EINVAL; |
| |
| /* Mark level interrupts, set delayed disable for edge ones and set |
| * handlers |
| */ |
| level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); |
| if (level) |
| irq_set_status_flags(virq, IRQ_LEVEL); |
| irq_set_chip_and_handler(virq, &pmac_pic, |
| level ? handle_level_irq : handle_edge_irq); |
| return 0; |
| } |
| |
| static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct, |
| const u32 *intspec, unsigned int intsize, |
| irq_hw_number_t *out_hwirq, |
| unsigned int *out_flags) |
| |
| { |
| *out_flags = IRQ_TYPE_NONE; |
| *out_hwirq = *intspec; |
| return 0; |
| } |
| |
| static struct irq_host_ops pmac_pic_host_ops = { |
| .match = pmac_pic_host_match, |
| .map = pmac_pic_host_map, |
| .xlate = pmac_pic_host_xlate, |
| }; |
| |
| static void __init pmac_pic_probe_oldstyle(void) |
| { |
| int i; |
| struct device_node *master = NULL; |
| struct device_node *slave = NULL; |
| u8 __iomem *addr; |
| struct resource r; |
| |
| /* Set our get_irq function */ |
| ppc_md.get_irq = pmac_pic_get_irq; |
| |
| /* |
| * Find the interrupt controller type & node |
| */ |
| |
| if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { |
| max_irqs = max_real_irqs = 32; |
| level_mask[0] = GC_LEVEL_MASK; |
| } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { |
| max_irqs = max_real_irqs = 32; |
| level_mask[0] = OHARE_LEVEL_MASK; |
| |
| /* We might have a second cascaded ohare */ |
| slave = of_find_node_by_name(NULL, "pci106b,7"); |
| if (slave) { |
| max_irqs = 64; |
| level_mask[1] = OHARE_LEVEL_MASK; |
| } |
| } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { |
| max_irqs = max_real_irqs = 64; |
| level_mask[0] = HEATHROW_LEVEL_MASK; |
| level_mask[1] = 0; |
| |
| /* We might have a second cascaded heathrow */ |
| slave = of_find_node_by_name(master, "mac-io"); |
| |
| /* Check ordering of master & slave */ |
| if (of_device_is_compatible(master, "gatwick")) { |
| struct device_node *tmp; |
| BUG_ON(slave == NULL); |
| tmp = master; |
| master = slave; |
| slave = tmp; |
| } |
| |
| /* We found a slave */ |
| if (slave) { |
| max_irqs = 128; |
| level_mask[2] = HEATHROW_LEVEL_MASK; |
| level_mask[3] = 0; |
| } |
| } |
| BUG_ON(master == NULL); |
| |
| /* |
| * Allocate an irq host |
| */ |
| pmac_pic_host = irq_alloc_host(master, IRQ_HOST_MAP_LINEAR, max_irqs, |
| &pmac_pic_host_ops, |
| max_irqs); |
| BUG_ON(pmac_pic_host == NULL); |
| irq_set_default_host(pmac_pic_host); |
| |
| /* Get addresses of first controller if we have a node for it */ |
| BUG_ON(of_address_to_resource(master, 0, &r)); |
| |
| /* Map interrupts of primary controller */ |
| addr = (u8 __iomem *) ioremap(r.start, 0x40); |
| i = 0; |
| pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) |
| (addr + 0x20); |
| if (max_real_irqs > 32) |
| pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) |
| (addr + 0x10); |
| of_node_put(master); |
| |
| printk(KERN_INFO "irq: Found primary Apple PIC %s for %d irqs\n", |
| master->full_name, max_real_irqs); |
| |
| /* Map interrupts of cascaded controller */ |
| if (slave && !of_address_to_resource(slave, 0, &r)) { |
| addr = (u8 __iomem *)ioremap(r.start, 0x40); |
| pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) |
| (addr + 0x20); |
| if (max_irqs > 64) |
| pmac_irq_hw[i++] = |
| (volatile struct pmac_irq_hw __iomem *) |
| (addr + 0x10); |
| pmac_irq_cascade = irq_of_parse_and_map(slave, 0); |
| |
| printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs" |
| " cascade: %d\n", slave->full_name, |
| max_irqs - max_real_irqs, pmac_irq_cascade); |
| } |
| of_node_put(slave); |
| |
| /* Disable all interrupts in all controllers */ |
| for (i = 0; i * 32 < max_irqs; ++i) |
| out_le32(&pmac_irq_hw[i]->enable, 0); |
| |
| /* Hookup cascade irq */ |
| if (slave && pmac_irq_cascade != NO_IRQ) |
| setup_irq(pmac_irq_cascade, &gatwick_cascade_action); |
| |
| printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); |
| #ifdef CONFIG_XMON |
| setup_irq(irq_create_mapping(NULL, 20), &xmon_action); |
| #endif |
| } |
| |
| int of_irq_map_oldworld(struct device_node *device, int index, |
| struct of_irq *out_irq) |
| { |
| const u32 *ints = NULL; |
| int intlen; |
| |
| /* |
| * Old machines just have a list of interrupt numbers |
| * and no interrupt-controller nodes. We also have dodgy |
| * cases where the APPL,interrupts property is completely |
| * missing behind pci-pci bridges and we have to get it |
| * from the parent (the bridge itself, as apple just wired |
| * everything together on these) |
| */ |
| while (device) { |
| ints = of_get_property(device, "AAPL,interrupts", &intlen); |
| if (ints != NULL) |
| break; |
| device = device->parent; |
| if (device && strcmp(device->type, "pci") != 0) |
| break; |
| } |
| if (ints == NULL) |
| return -EINVAL; |
| intlen /= sizeof(u32); |
| |
| if (index >= intlen) |
| return -EINVAL; |
| |
| out_irq->controller = NULL; |
| out_irq->specifier[0] = ints[index]; |
| out_irq->size = 1; |
| |
| return 0; |
| } |
| #endif /* CONFIG_PPC32 */ |
| |
| static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| struct mpic *mpic = irq_desc_get_handler_data(desc); |
| unsigned int cascade_irq = mpic_get_one_irq(mpic); |
| |
| if (cascade_irq != NO_IRQ) |
| generic_handle_irq(cascade_irq); |
| |
| chip->irq_eoi(&desc->irq_data); |
| } |
| |
| static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) |
| { |
| #if defined(CONFIG_XMON) && defined(CONFIG_PPC32) |
| struct device_node* pswitch; |
| int nmi_irq; |
| |
| pswitch = of_find_node_by_name(NULL, "programmer-switch"); |
| if (pswitch) { |
| nmi_irq = irq_of_parse_and_map(pswitch, 0); |
| if (nmi_irq != NO_IRQ) { |
| mpic_irq_set_priority(nmi_irq, 9); |
| setup_irq(nmi_irq, &xmon_action); |
| } |
| of_node_put(pswitch); |
| } |
| #endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ |
| } |
| |
| static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, |
| int master) |
| { |
| const char *name = master ? " MPIC 1 " : " MPIC 2 "; |
| struct resource r; |
| struct mpic *mpic; |
| unsigned int flags = master ? MPIC_PRIMARY : 0; |
| int rc; |
| |
| rc = of_address_to_resource(np, 0, &r); |
| if (rc) |
| return NULL; |
| |
| pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); |
| |
| flags |= MPIC_WANTS_RESET; |
| if (of_get_property(np, "big-endian", NULL)) |
| flags |= MPIC_BIG_ENDIAN; |
| |
| /* Primary Big Endian means HT interrupts. This is quite dodgy |
| * but works until I find a better way |
| */ |
| if (master && (flags & MPIC_BIG_ENDIAN)) |
| flags |= MPIC_U3_HT_IRQS; |
| |
| mpic = mpic_alloc(np, r.start, flags, 0, 0, name); |
| if (mpic == NULL) |
| return NULL; |
| |
| mpic_init(mpic); |
| |
| return mpic; |
| } |
| |
| static int __init pmac_pic_probe_mpic(void) |
| { |
| struct mpic *mpic1, *mpic2; |
| struct device_node *np, *master = NULL, *slave = NULL; |
| unsigned int cascade; |
| |
| /* We can have up to 2 MPICs cascaded */ |
| for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) |
| != NULL;) { |
| if (master == NULL && |
| of_get_property(np, "interrupts", NULL) == NULL) |
| master = of_node_get(np); |
| else if (slave == NULL) |
| slave = of_node_get(np); |
| if (master && slave) |
| break; |
| } |
| |
| /* Check for bogus setups */ |
| if (master == NULL && slave != NULL) { |
| master = slave; |
| slave = NULL; |
| } |
| |
| /* Not found, default to good old pmac pic */ |
| if (master == NULL) |
| return -ENODEV; |
| |
| /* Set master handler */ |
| ppc_md.get_irq = mpic_get_irq; |
| |
| /* Setup master */ |
| mpic1 = pmac_setup_one_mpic(master, 1); |
| BUG_ON(mpic1 == NULL); |
| |
| /* Install NMI if any */ |
| pmac_pic_setup_mpic_nmi(mpic1); |
| |
| of_node_put(master); |
| |
| /* No slave, let's go out */ |
| if (slave == NULL) |
| return 0; |
| |
| /* Get/Map slave interrupt */ |
| cascade = irq_of_parse_and_map(slave, 0); |
| if (cascade == NO_IRQ) { |
| printk(KERN_ERR "Failed to map cascade IRQ\n"); |
| return 0; |
| } |
| |
| mpic2 = pmac_setup_one_mpic(slave, 0); |
| if (mpic2 == NULL) { |
| printk(KERN_ERR "Failed to setup slave MPIC\n"); |
| of_node_put(slave); |
| return 0; |
| } |
| irq_set_handler_data(cascade, mpic2); |
| irq_set_chained_handler(cascade, pmac_u3_cascade); |
| |
| of_node_put(slave); |
| return 0; |
| } |
| |
| |
| void __init pmac_pic_init(void) |
| { |
| /* We configure the OF parsing based on our oldworld vs. newworld |
| * platform type and wether we were booted by BootX. |
| */ |
| #ifdef CONFIG_PPC32 |
| if (!pmac_newworld) |
| of_irq_workarounds |= OF_IMAP_OLDWORLD_MAC; |
| if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL) |
| of_irq_workarounds |= OF_IMAP_NO_PHANDLE; |
| |
| /* If we don't have phandles on a newworld, then try to locate a |
| * default interrupt controller (happens when booting with BootX). |
| * We do a first match here, hopefully, that only ever happens on |
| * machines with one controller. |
| */ |
| if (pmac_newworld && (of_irq_workarounds & OF_IMAP_NO_PHANDLE)) { |
| struct device_node *np; |
| |
| for_each_node_with_property(np, "interrupt-controller") { |
| /* Skip /chosen/interrupt-controller */ |
| if (strcmp(np->name, "chosen") == 0) |
| continue; |
| /* It seems like at least one person wants |
| * to use BootX on a machine with an AppleKiwi |
| * controller which happens to pretend to be an |
| * interrupt controller too. */ |
| if (strcmp(np->name, "AppleKiwi") == 0) |
| continue; |
| /* I think we found one ! */ |
| of_irq_dflt_pic = np; |
| break; |
| } |
| } |
| #endif /* CONFIG_PPC32 */ |
| |
| /* We first try to detect Apple's new Core99 chipset, since mac-io |
| * is quite different on those machines and contains an IBM MPIC2. |
| */ |
| if (pmac_pic_probe_mpic() == 0) |
| return; |
| |
| #ifdef CONFIG_PPC32 |
| pmac_pic_probe_oldstyle(); |
| #endif |
| } |
| |
| #if defined(CONFIG_PM) && defined(CONFIG_PPC32) |
| /* |
| * These procedures are used in implementing sleep on the powerbooks. |
| * sleep_save_intrs() saves the states of all interrupt enables |
| * and disables all interrupts except for the nominated one. |
| * sleep_restore_intrs() restores the states of all interrupt enables. |
| */ |
| unsigned long sleep_save_mask[2]; |
| |
| /* This used to be passed by the PMU driver but that link got |
| * broken with the new driver model. We use this tweak for now... |
| * We really want to do things differently though... |
| */ |
| static int pmacpic_find_viaint(void) |
| { |
| int viaint = -1; |
| |
| #ifdef CONFIG_ADB_PMU |
| struct device_node *np; |
| |
| if (pmu_get_model() != PMU_OHARE_BASED) |
| goto not_found; |
| np = of_find_node_by_name(NULL, "via-pmu"); |
| if (np == NULL) |
| goto not_found; |
| viaint = irq_of_parse_and_map(np, 0); |
| |
| not_found: |
| #endif /* CONFIG_ADB_PMU */ |
| return viaint; |
| } |
| |
| static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) |
| { |
| int viaint = pmacpic_find_viaint(); |
| |
| sleep_save_mask[0] = ppc_cached_irq_mask[0]; |
| sleep_save_mask[1] = ppc_cached_irq_mask[1]; |
| ppc_cached_irq_mask[0] = 0; |
| ppc_cached_irq_mask[1] = 0; |
| if (viaint > 0) |
| set_bit(viaint, ppc_cached_irq_mask); |
| out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); |
| if (max_real_irqs > 32) |
| out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); |
| (void)in_le32(&pmac_irq_hw[0]->event); |
| /* make sure mask gets to controller before we return to caller */ |
| mb(); |
| (void)in_le32(&pmac_irq_hw[0]->enable); |
| |
| return 0; |
| } |
| |
| static int pmacpic_resume(struct sys_device *sysdev) |
| { |
| int i; |
| |
| out_le32(&pmac_irq_hw[0]->enable, 0); |
| if (max_real_irqs > 32) |
| out_le32(&pmac_irq_hw[1]->enable, 0); |
| mb(); |
| for (i = 0; i < max_real_irqs; ++i) |
| if (test_bit(i, sleep_save_mask)) |
| pmac_unmask_irq(irq_get_irq_data(i)); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_PM && CONFIG_PPC32 */ |
| |
| static struct sysdev_class pmacpic_sysclass = { |
| .name = "pmac_pic", |
| }; |
| |
| static struct sys_device device_pmacpic = { |
| .id = 0, |
| .cls = &pmacpic_sysclass, |
| }; |
| |
| static struct sysdev_driver driver_pmacpic = { |
| #if defined(CONFIG_PM) && defined(CONFIG_PPC32) |
| .suspend = &pmacpic_suspend, |
| .resume = &pmacpic_resume, |
| #endif /* CONFIG_PM && CONFIG_PPC32 */ |
| }; |
| |
| static int __init init_pmacpic_sysfs(void) |
| { |
| #ifdef CONFIG_PPC32 |
| if (max_irqs == 0) |
| return -ENODEV; |
| #endif |
| printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); |
| sysdev_class_register(&pmacpic_sysclass); |
| sysdev_register(&device_pmacpic); |
| sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); |
| return 0; |
| } |
| machine_subsys_initcall(powermac, init_pmacpic_sysfs); |
| |